1275 Danner Dr Tel:330-562-7070
Fax:330-562-1999
R NETWORK
TECHNOLOGIES
INCORPORATED www.networktechinc.com
Aurora, OH 44202
NTI
XTENDEX® Series
EXTENDERS
Installation and Operation Manual
ST-C5KVM2ARS-1000S
Keyboard, Mouse, Video,
Audio and RS232
Extender
ST-C5V2ARS-1000S
Video, Audio and RS232
Extender
Man060 Rev. 2/6/08
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Introduction......................................................................................................................................................................1
Materials..........................................................................................................................................................................2
Features and Functions...................................................................................................................................................3
Limitations .......................................................................................................................................................................5
Preparation for Installation ..............................................................................................................................................5
Installation .......................................................................................................................................................................6
Installing The Local Unit ..............................................................................................................................................6
Connect The CAT5 Cable............................................................................................................................................8
Installing The Remote Unit ..........................................................................................................................................9
Connect the CAT5 cable............................................................................................................................................10
Plug-in and Boot Up...................................................................................................................................................11
Video Adjustments ........................................................................................................................................................12
Test Patterns for Color Skew Adjustment...............................................................................................................12
Fine Video Quality Adjustment for KVM Models .......................................................................................................13
Technical Specifications................................................................................................................................................15
Interconnection Cable Wiring Method...........................................................................................................................16
Troubleshooting.............................................................................................................................................................16
Index..............................................................................................................................................................................17
Warranty Information.....................................................................................................................................................18
TABLE OF FIGURES
Figure 1- Connect the Local Unit with VGA video and RS232 support to the CPU............................................................................6
Figure 2- Connect the Local Unit with audio support to the CPU.......................................................................................................7
Figure 3- Connect the local user to the XTENDEX Local Unit ...........................................................................................................7
Figure 4- Connect stereo speakers and microphone to XTENDEX Local Unit with audio support ....................................................8
Figure 5- Connect CAT5 cable to Local Unit......................................................................................................................................8
Figure 6- Connect the extended components to the Remote Unit .....................................................................................................9
Figure 7- Connect speakers and microphone to the Remote Unit ...................................................................................................10
Figure 8- Connect the CAT5 cable to the Remote Unit....................................................................................................................10
Figure 9- Connect the AC adapter to the Remote Unit ....................................................................................................................11
Figure 10- Video Adjustment buttons...............................................................................................................................................12
Figure 11- View looking into RJ45 female........................................................................................................................................16
Download from Www.Somanuals.com.iAill Manuals Search And Download.
NTI XTENDEX Extenders
INTRODUCTION
The XTENDEX Series CAT5 Extender (XTENDEX) is designed to enable one CPU to be controlled by two users, one local and
one remote. Extended components may include a standard monitor (or touchscreen monitor when RS232 is supported), PS/2
keyboard, PS/2 mouse, microphone, and speakers, The remote user can be located as much as 1000 feet away from a PS/2
CPU via Category 5/5e/6 unshielded twisted-pair cable. The local user will be located near the CPU.
The XTENDEX Series Extender is extremely simple to install and has been thoroughly tested to insure reliable performance.
Through the use of Category 5 cable it is possible to economically increase the flexibility of a computer system. Here are some of
the features and ways this can benefit any workplace:
• Allows the placement of computer peripherals (monitor, keyboard, and mouse) in a location where
only these parts are needed without having the CPU there too, taking up valuable space
• Allows a PS/2 CPU to be accessed by both a local and remote user (up to 1000 feet away)
• Compatible with XGA, VGA, and SVGA systems
• Provides crisp and clear resolution up to 1920 x 1200 @ 1000 feet (see page 15 for more details)
• Compatible with all NTI switches and splitters, enabling the joining of products to create a system that
satisfies all networking needs
• Video quality adjustment, for varying lengths of cable, is automatic (see page 12) providing optimum image quality
• Audio frequency response is 20Hz to 20Khz, + 1dB (models with audio support only)
• Digital transmission of audio signals reduces any loss in quality (models with audio support only)
• Built-in surge protection
This manual covers each of the XTENDEX Series CAT5-1000S Extender models offered. Some features described in this
manual are available in some models and not in others. The chart below shows the features supported in each:
Model
IR
Keyboard Mouse
2-Way Audio
Support
No
Yes
No
Yes
No
Yes
No
RS232
Support
No
Support
Yes
Yes
Yes
Yes
No
No
No
No
ST-C5KVM-1000S
ST-C5KVM2A-1000S
ST-C5KVMRS-1000S
ST-C5KVM2ARS-1000S
ST-C5V-1000S
ST-C5V2A-1000S
ST-C5VRS-1000S
ST-C5V2ARS-1000S
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Note: The IR controls (transmitter and receiver) are not available as of this printing.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
MATERIALS
Materials Included with this kit:
9
9
9
NTI XTENDEX Local Unit
NTI XTENDEX Remote Unit
2- 120VAC at 60Hz-9VDC/1.0A AC Adapters
--or--
230VAC at 50Hz-9VDC/1.5A AC Adapters
9
9
9
CD with a pdf file of this owner's manual and test patterns for color skew adjustment
2- DB9M-RJ45F Serial Adapter RJ45 Female-DB9 Male (models with RS232 support only)
2- 5 foot RJ45-to-RJ45 CAT5 Patch Cables (models with RS232 support only)
Additional materials may need to be ordered, depending upon the configuration:
¾
¾
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
16 for proper EIA/TIA 568 B wiring method)
Cable(s) needed if Local Unit will be located further than 15" from the CPU
Model
Cable(s) needed
ST-C5KVM-1000S
ST-C5KVMRS-1000S
ST-C5KVM2A-1000S
ST-C5KVM2ARS-1000S
ST-C5V-1000S
VKMEXT-xx
VKMEXT-xx and DINT-xx
VKMEXT-xx and SA-xx-MF
VKMEXT-xx , SA-xx-MF, and DINT-xx
VEXT-xx
ST-C5VRS-1000S
ST-C5V2A-1000S
ST-C5V2ARS-1000S
VEXT-xx and DINT-xx
VEXT-xx and SA-xx-MF
VEXT-xx, SA-xx-MF, and DINT-xx
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
2
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
1
2
3
4a
5a
5b
5c
15
6
7
E X D N E X T
R
NTI
XTENDEX
c n I s e i g o l o n c h e T k r o w t N e
Network Technologies Inc
I N T
R
(Front View)
(Rear View)
ST-C5KVM2ARS-1000S Local Unit
2
11a
11b 11c
10
8a
9
1
3
4a
5a
5b
5c
20 15
E X D N E X T
R
NTI
XTENDEX
c n I s e i g o l o n c h e T k r o w t N e
Network Technologies Inc
I N T
R
(Front View)
(Rear View)
ST-C5V2ARS-1000S Local Unit
11a
11b 11c
8a
FEATURES AND FUNCTIONS
1. Green LED- power indicator- illuminates when power has been supplied to the unit
2. Yellow LED-traffic indicator- illuminates when there is communication between the local and remote units.
3. Cat 5- RJ45 female- for connecting the CAT 5 cable
4a. Video Connector- 15HD female- for connecting the local user's VGA monitor
5a. RS232 Connector- RJ45 female- for connecting the local user's touchscreen monitor (models with RS232 support only)
5b. Audio Jack- lime 3.5mm stereo audio jack- for connecting to local speakers (models with audio support only)
5c. Audio Jack- pink 3.5mm stereo audio jack- for connecting to local microphone ( models with audio support only)
6. Mouse Connector- green female 6 miniDIN- for connecting the local user's mouse
7. Keyboard Connector- purple female 6 miniDIN- for connecting the local user's keyboard
8a. Video Connector- blue 15HD male- for connecting to the video port on the CPU or KVM switch
9. Mouse Connector- green male 6 miniDIN- for connecting to the mouse port on the CPU or KVM switch
10. Keyboard Connector- purple male 6 miniDIN- for connecting to the keyboard port on the CPU or KVM switch
11a. RS232 Connector- light gray 9D female- for connecting to the RS232 port on the CPU or KVM switch (models with RS232
support only)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
11b. Audio Plug- lime 3.5mm stereo audio plug- for connecting to CPU audio line out (models with audio support only)
11c. Audio Plug- pink 3.5mm stereo audio plug- for connecting to CPU microphone jack (models with audio support only)
12. Keyboard Connector- purple female 6 miniDIN- for connecting the remote user's keyboard
13. Mouse Connector- green female 6 miniDIN- for connecting the remote user's mouse
14a. RS232 Connector- 9D male- for connecting the remote user's touchscreen monitor (models with RS232 support only)
14b. Audio Jack- lime 3.5mm stereo audio jack- for connecting to remote speakers (models with audio support only)
14b. Audio Jack- pink 3.5mm stereo audio jack- for connecting a microphone (models with audio support only)
15. 9VDC- 1.0A- connection jack for the AC adapter
16a. Video Connector- 15HD female- for connecting the remote user's monitor
17. + / - Buttons- for fine video quality adjustment (in models without keyboard/mouse support)
18. Mode Button- for switching between skew adjustment and video quality adjustment modes (only in models without
keyboard/mouse support)
19. Mode LED- for visual indication of skew or video quality adjustment modes (only in models without keyboard/mouse support)
20. IR Jack- For connection of an Infrared Sensor for remote control (only in models without keyboard/mouse support) (feature
not supported as of this printing)
16
14c
3
14a 14b
15
13
12
E X D E N X T
R
NTI
XTENDEX
c n I s e i
g
l o o n c e h T k r o w t N e
Network Technologies Inc
I N T
R
2
1
(Front View)
(Rear View)
ST-C5KVM2ARS-1000S Remote Unit
16
3
20 15
18 17 19
E X D E N X T
R
NTI
XTENDEX
c n I s e i
g
l o o n c e h T k r o w t N e
Network Technologies Inc
I N T
R
2
1
(Front View)
(Rear View)
ST-C5V-1000S Remote Unit
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
LIMITATIONS
•
•
Hot-plugging of devices is supported provided devices were originally connected at power-up.
In order for two users to share a PS/2 CPU, the user in control must pause for at least 3 seconds before another user can
take control. After the 3 second pause, either user can take control of the CPU.
For models with RS232 support:
•
The RS232 ports on the Local and Remote Units will support serial devices other than touchscreen monitors as follows:
•
•
2 simple devices (i.e. mice) connected to each unit, or
1 complex device (i.e. serial modem, RS232 command port on an NTI switch) connected to
either the Remote or Local Unit.
•
The RS232 port supports all baud rates up to 57.6K bits per second and the attached CPU must be configured accordingly.
For models with 2-way audio support:
•
The audio jacks of the XTENDEX with audio support are compatible with the following standard CPU audio connectors:
•
•
•
•
Line out - typically lime green in color
Speaker out- typically orange in color
Headphone out- typically located on the CD-ROM
Microphone in- typically pink in color
•
.
The audio output of the XTENDEX with 2-way audio support is compatible with self-powered stereo speakers.
•
When two microphones are connected (one at local and one at remote), only one can be active at a time
The user will select the active microphone via either push-button or keyboard command.
PREPARATION FOR INSTALLATION
•
•
Locations should be chosen for the monitors, mice, and keyboards that also have space to connect the Remote and Local
Units within the distance provided by the cables. If extension cables are needed, contact NTI for the cables required.
The CAT5 cables must be run to the locations where the Remote and Local Units will be connected. Be careful to route the
cables away from any sources of magnetic fields or electrical interference that might reduce the quality of the video signal
(i.e. AC motors, welding equipment, etc.).
•
•
All cables should be installed in such a way that they do not cause stress on their connections to the equipment. Extended
lengths of cable hanging from a connection may interfere with the quality of that connection. Secure cables as needed to
minimize this.
Properly shut down and disconnect the power from the CPU and monitors to be separated. If other equipment is involved
whose connections are being interrupted, be sure to refer to the instruction manuals for that equipment for proper
disconnection and re-connection procedures before proceeding.
Note: CAT5 connection cable used between NTI XTENDEX Series Local and Remote or any XTENDEX Series products
should not be run underground, outdoors or between buildings.
WARNING: Outdoor or underground runs of CAT5 cable could be dangerous and will void the warranty.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
INSTALLATION
Installing The Local Unit
1. Plug the cables of the Local Unit into the back of the CPU. (See Fig. 1.)
a) Connect the blue 15HD cable end to the VGA port on the back of the CPU.
b) Connect the purple 6 pin miniDIN cable end with the keyboard symbol
on it to the keyboard port on the back of the CPU. (KVM models only)
(Keyboard)
(Mouse)
c) Connect the green 6 pin miniDIN cable end with the mouse symbol
on it to the mouse port on the back of the CPU. (KVM models only)
DEVICE
(LIGHT GRAY- RS232)
CONNECTORS
9D Female Connector
6 pin miniDIN
Male Connector
(PURPLE-KEYBOARD)
(GREEN-MOUSE)
6 pin miniDIN
Female Connector
R
NTI
Network Technologies Inc
XTENDEX
SERIAL
CONNECTOR
9D Male
RS232 Connector
(BLUE- VIDEO)
ST-C5KVMRS-1000S Local Unit
(Front View)
PS/2 CPU
VIDEO
CONNECTOR
15HD Male
Video Connector
15HD Female
Video Connector
Figure 1- Connect the Local Unit with VGA video and RS232 support to the CPU
d) If the Local Unit has RS232 support, connect the light gray 9D cable end to the RS232 port on
the back of the CPU.
e) If the Local Unit has Audio support, connect the lime green 3.5mm stereo plug into the "line out",
"speaker", or "headphones" jack on the back of the CPU. (See Fig. 2). Connect the pink 3.5mm stereo plug
to the “line in” or “microphone” jack on the back of the CPU.
Notes:
If all 3 jacks are available, use the jack marked "line out".
The "line out" jack is typically lime green and may be marked with this symbol
The "speaker" jack is typically orange, and may be marked with this symbol
The "headphones" jack may be marked with this symbol
The “microphone” jack is typically pink and may be marked with this symbol
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
(PURPLE-KEYBOARD)
(GREEN-MOUSE)
R
NTI
XTENDEX
Network Technologies Inc
AUDIO CONNECTORS
(BLUE- VIDEO)
ST-C5KVM2A-1000S Local Unit
(Front View)
ONE WILL BE MARKED "line
out","speaker", "headphones"
OR WITH THIS SYMBOL
(LIME- SPEAKERS)
PS/2 CPU
(PINK-MICROPHONE)
3.5mm Stereo Plug
Figure 2- Connect the Local Unit with audio support to the CPU
2. Make connections for a local user (see Fig. 3)
a) Connect the cable from the local user's VGA monitor to the female 15HD port on the Local Unit.
b) Connect the local user's keyboard to the purple 6 pin miniDIN female port on the Local Unit.
c) Connect the local user's mouse to the green 6 pin miniDIN female port on the Local Unit.
ST-C5KVMRS-1000S Local Unit (Front and Rear View)
Front View of
Local Unit
Rear View of Local Unit
15HD Female
R
Video Connector
NTI
Network Technologies Inc
XTENDEX
Green Power LED
Yellow Traffic LED
CAT5 Cable to
Remote Unit
Cat5 Patch Cable
(supplied)
6 pin miniDIN
Female Connector
DB9M-RJ45F Adapter
(supplied)
VGA
Multi-Scan
Touch-screen
Monitor
PS/2 MOUSE
PS/2 KEYBOARD
Local User's Keyboard, Monitor, and Mouse
Figure 3- Connect the local user to the XTENDEX Local Unit
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
d) If the Local Unit has RS232 support, connect the local user's RS232 cable from a touch screen
monitor to the RJ45 port on the Local Unit using the DB9M-to-RJ45 adapter and patch cable provided.
e) If the Local Unit has audio support, connect the cable from the local speakers to the 3.5mm
stereo audio jack with the speaker symbol on the Local Unit. (See Fig. 4) Connect a microphone to the
3.5mm stereo audio jack with the microphone symbol on the Local Unit.
ST-C5KVM2ARS-1000S Local Unit
Rear View
X
N E D T E X
c n I s e i
g
l o o n c e h T k r o w t N e
I N T
R
Microphone
Stereo
Speakers
Figure 4- Connect stereo speakers and microphone to XTENDEX Local Unit with audio support
Note: When two microphones are connected (one at local and one at remote), only one can be active at a time. See
mode charts on pages 12 and 13 for active microphone selection.
Connect The CAT5 Cable
Connect the CAT5 cable to the “Cat 5” port on the Local Unit. (See Fig. 5.) When properly inserted the cable end
should snap into place.
ST-C5KVM2ARS-1000S Local Unit
Rear View
Note: If an RJ45 wall outlet is being used, connect the other
end of the extension cable to the RJ45 wall outlet.
X
E N X D T E
c n I s e i g o l o n h c e T k r o w t N e
I
N T
R
!
WARNING: Never connect the XTENDEX to an Ethernet
card, Ethernet router, hub or switch or other Ethernet RJ45 connector
of an Ethernet device. Damage to devices connected to the Ethernet
may result.
Yellow Traffic LED
Green Power LED
CAT5 Cable to
Remote Unit
Figure 5- Connect CAT5 cable to Local Unit
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
Installing The Remote Unit
1. Position the Remote Unit such that the CAT5 cable, the monitor cable, device cables, and the AC
adapter power connector can each reach the Remote Unit without putting strain on the cables.
2. Connect the monitor cable to the female 15HD video connector on the Remote Unit.
3. Connect the device(s) to the Remote Unit (see Fig. 6)(KVM models only).
a. Connect the keyboard to the purple female 6 pin miniDIN connector on the Remote Unit.
b. Connect the mouse to the green female 6 pin miniDIN connector on the Remote Unit.
4. If the Remote Unit has RS232 support, connect the remote user's RS232 cable from a touch
screen monitor to the RJ45 port on the Remote Unit using the DB9M-to-RJ45 adapter and patch cable
provided.
5. If the Remote Unit has audio support, connect the cable from the remote speakers to the 3.5mm
stereo audio jack with the speaker symbol on the Remote Unit. (See Fig. 7) Connect a microphone
to the 3.5mm stereo audio jack with the microphone symbol on the Remote Unit.
ST-C5KVMRS-1000S Remote Unit (Front and Rear View)
Front View of
Remote Unit
Rear View of Remote Unit
R
15HD Female
Video Connector
NTI
Network Technologies Inc
XTENDEX
CAT5 Cable to
Local Unit
Cat5 Patch Cable
(supplied)
DB9M-RJ45F Adapter
(supplied)
VGA
Multi-Scan
Monitor
6 pin miniDIN
Female Connector
PS/2 MOUSE
PS/2 KEYBOARD
Remote User's Keyboard, Monitor, and Mouse
Figure 6- Connect the extended components to the Remote Unit
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NTI XTENDEX Extenders
ST-C5KVM2A-1000S Remote Unit
Rear View
X
N E D T E X
c n I s e i
g
l o o n c e h T k r o w t N e
I N T
R
Microphone
Stereo
Speakers
Figure 7- Connect speakers and microphone to the Remote Unit
Note: When two microphones are connected (one at local and one at remote), only one can be active at a time. See
mode charts on pages 12 and 13 for active microphone selection.
Connect the CAT5 cable
ST-C5KVM2ARS-1000S Remote Unit
Make sure the CAT5 cable has been installed in accordance with
the “Preparation for Installation” instruction on page 3. Connect the
CAT5 cable to the “Cat 5” port on the Remote Unit. (See Fig. 8.)
When properly inserted the CAT5 cable end should snap into place.
Rear View
E X D E N X T
c n I s e i
g
l o o n c e h T k r o w t N e
I N T
R
Note: If an RJ45 wall outlet is being used, connect the other end
of the extension cable to the RJ45 wall outlet.
!
WARNING: Never connect the XTENDEX to an
Ethernet card, Ethernet router, hub or switch or other Ethernet
RJ45 connector of an Ethernet device. Damage to devices
connected to the Ethernet may result.
CAT5 Cable to
Local Unit
Figure 8- Connect the CAT5 cable to the Remote Unit
Download from Www.Somanuals.com.1A0ll Manuals Search And Download.
NTI XTENDEX Extenders
Plug-in and Boot Up
1. Plug the power cord from the monitor into the power outlet.
2. Connect each AC adapter power connector to the 9VDC ports on the Remote and Local Units Plug each AC adapter into a
power outlet. The green LED on the RJ45 connector of both the Remote and Local Units should illuminate, indicating that a
proper power connection has been made to them. (See Fig. 9.)
Front View of Remote Unit
9 VDC
Adapter
ADAPTER
View of CAT5
connector
Green Power LED
Yellow Traffic LED
Barrel
Power Connector
9VDC @ 1.0A OUTPUT
(Outside
barrel)
(Inside
barrel)
2.1 mm x 5.5 mm Female
Figure 9- Connect the AC adapter to the Remote Unit
3. Turn ON the CPU and Monitor. They should each react as if they were directly connected to each other.
Note: The yellow LED on each RJ45 connector will illuminate anytime data traffic is passing between the Local and
Remote Units, indicating proper CAT5 cable connection and communication. (See Fig. 9)
Download from Www.Somanuals.com.1A1ll Manuals Search And Download.
NTI XTENDEX Extenders
VIDEO ADJUSTMENTS
Automatic Video Quality Adjustment
Video quality is broken down into “general video quality” for brightness and sharpness of the images, and “color skew” for how the
colors align with each other on the monitor. All general video quality adjustment is done automatically while color skew is
adjusted manually as described in the following sections. Test patterns for color skew adjustment are provided on the CD (see
below). The automatic general video quality adjustment is calibrated for unshielded twisted pair cable. For shielded cable fine
adjustment may be necessary and this can be done from +/- push buttons on all models without a keyboard or from keyboard
keys using Command Mode on models that support a keyboard. Video Quality Adjustment settings are automatically stored in
the XTENDEX. Settings will be restored each time the XTENDEX is powered-ON.
Note: If the cable is changed after making fine video quality adjustments or color skew adjustments (below), the
XTENDEX will restore these settings to factory default and fine adjustments with the new cable may be necessary.
Fine Video Quality Adjustment for Video-Only Models
It is possible that on initial startup the image on the monitor will not be as crisp as the image normally is or the colors may not
appear as they normally would. The colors may also be skewed, or out of alignment as they appear on the monitor. This is due
to the frequency characteristics of the CAT5 cable and differences in cable types that can be used (i.e. shielded vs. unshielded
cable and CAT5 vs. CAT6 cable). Models without keyboard support include a “Mode” button for the following functions:
¾
¾
¾
¾
fine adjustment of the general video quality
color skew adjustment (alignment of red, green, and blue signals on the monitor)
update DDC information between the monitor and CPU
select the active microphone (between local and remote units)
Test Patterns for Color Skew Adjustment
To verify the need for and effect of color skew adjustment using a test pattern specifically designed for your
display setting, browse the CD this manual was found on and click on the “test-pattern-nXm.pdf” file that
matches your current video resolution. Follow the instructions below to make adjustments as needed.
(Decrease)
(Increase)
+
Mode button
Depending upon what mode the XTENDEX is in, the “+” (plus)
and “-“ (minus) buttons can be pressed to make the adjustment.
A “Mode” LED is provided to indicate what characteristic is being
changed.
Mode LED
Front View of ST-C5V-1000S
Figure 10- Video Adjustment buttons
Note: The Local and Remote units must be connected and communicating in order for the mode button to function.
The chart below describes the video quality changes that can be made with the Mode button and the associated indication
provided by the Mode LED.
Mode Button
Action
LED Indication
Dark (LED OFF)
Red
Green
Orange
Press + or – to effect:
General Video Quality
Red Skew
Green Skew
Blue Skew
Note: After pressing the Mode button,
if there is a pause in button activity
for 30 seconds or more, the feature
will return to a power-ON state with
the LED OFF.
At power ON
First Press
Second Press
Third Press
Fourth Press
Green Flashing
DDC update
(press + or – to update)
Active microphone
Flash rapid= remote
Flash slow= local
(press + or – to toggle
which is active)
Fifth Press
Red Flashing-
rapid or slow
Sixth Press
Dark (LED OFF)- repeat cycle
Download from Www.Somanuals.com.1A2ll Manuals Search And Download.
NTI XTENDEX Extenders
A momentary press of either the “+” (plus) or “-“ (minus) buttons button will make a minor change in the image. If either button is
pressed and held, the changes made will be gradual and continuous. Ultimately, the image quality should improve to a
satisfactory level. Once the adjustment is made, it should not be necessary to change it again, as the new settings are stored in
memory and become the default settings with each startup.
If the image still lacks definition, configuration adjustments may need to be made to the attached video display equipment. This is
a problem most often seen in LCD displays. Check the manual for the equipment having the poor display and look for an "auto-
adjust" or "auto-configure" feature. Once this is done, you may need to repeat the Video Adjustment procedure described
above to achieve the best image.
Fine Video Quality Adjustment for KVM Models
Models with keyboard support (ST-C5KVM-1000S, ST-C5KVM2A-1000S, ST-C5KVMRS-1000S, ST-C5KVM2ARS-1000S) are
enabled with a Command Mode feature to perform the following:
¾
¾
¾
¾
fine adjustment of the general video quality
color skew adjustment (alignment of red, green, and blue signals on the monitor)
update DDC information between the monitor and CPU
select the active microphone (between local and remote units)
Most of the video quality adjustment is automatic at power ON, but if some adjustment is necessary, this can be done using only
the keyboard attached to the Remote Unit.
To enter Command Mode;
1. press and hold the left <Shift> key
2. press the right <Shift>key.
3. Release both keys.
The three keyboard LEDs (NumLock, CapsLock, and ScrollLock) will blink to indicate entrance into Command Mode.
Once in Command Mode, to fine tune the general video quality, press the <Left Arrow> or <Right Arrow>keys until the
desired improvement in the display has been achieved.
If a specific color appears to be skewed and is in need of fine adjustment, the user should select the color by pressing <R>, <G>or
<B>respectively. The keyboard LEDs will identify the mode as indicated in the table below. Press the < Left Arrow> or
<Right Arrow>keys until the desired improvement in the color alignment has been achieved.
Tip: To verify the need for and effect of color skew adjustment using a test pattern specifically designed for
your display setting, browse the CD this manual was found on and click on the “test-pattern-nXm.pdf” file
that matches your current video resolution.
To update DDC information, press <D>and the Caps Lock and Scroll Lock LEDs will blink sequentially while the DDC data is
transferred.
Note: It is recommended that the monitors connected to the Remote and Local units be of the same make and model.
To toggle the active microphone between the Remote or Local unit, press <M>. The table below indicates how to determine
which microphone is active after pressing <M>.
Keyboard LED Indications
Mode
NUM LOCK
Blink
CAPS LOCK
Blink
SCROLL LOCK
Blink
General Video Quality
Red Skew
Blink
Solid
Solid
Green Skew
Solid
Blink
Solid
Blue Skew
Solid
Solid
Blink
Local Microphone active
Remote Microphone active
DDC
Blink
Blink
Solid
Solid
Blink
Blink
Sequentially blinking
Press the<A>key (while in Command Mode) to reset the fine tuning to default settings.
Press the <Esc>key to exit Command Mode and return to normal operation. All keyboard LEDs will return to current keyboard
LED state.
Download from Www.Somanuals.com.1A3ll Manuals Search And Download.
NTI XTENDEX Extenders
FYI: Video quality will be limited by several factors. Some factors include the quality and type of CAT5 cable being
used, the length of cable run, the quality of the monitor, the resolution setting of the monitor, and the quality of the video
card used in the video source. If the desired level of image clarity cannot be achieved by making the adjustments
described in this section, consider the following possible adjustments that can be made:
•
Improve the quality of cable used (CAT5,5e,or 6), CAT6 unshielded (UTP) cable will provide the best
performance
•
•
•
•
Use unshielded cable (UTP) instead of shielded cable (STP)
Shorten the length of the cable between the remote and local
Reduce the resolution setting on the monitor used
Use a higher quality video card in the video source
Download from Www.Somanuals.com.1A4ll Manuals Search And Download.
NTI XTENDEX Extenders
TECHNICAL SPECIFICATIONS
Models with VGA Video
Video Compatibility
Video Coupling
VGA,SVGA, XGA, SXGA,UXGA
DC
Video Connectors
HD15 male to CPU
HD15 female to monitor
75 Ohms
Input / Output Impedance
Input Horizontal Frequency Range
Input Vertical Frequency Range
Sync Types Supported
15kHz to 130kHz
30 Hz to 150 Hz
Separate and composite TTL Level
1.45Vp-p
Video Maximum I/O Levels
Models with Keyboard/Mouse support
Keyboard/Mouse Connectors
Female 6 pin miniDIN to Keyboard and Mouse
Male 6 pin miniDIN to CPU device ports
All PS/2 mice and keyboards
Mouse and Keyboard Compatibility
Keyboard and Mouse Current Rating
Models with Stereo Audio Support
Audio Connectors
500mA maximum
3.5mm stereo jack (lime) to speakers
3.5mm stereo plug (lime) to CPU
Line Level, stereo, unbalanced
20Hz to 20Khz, + 1dB
76 dBA
Signal Type
Audio Frequency Response
Signal-to-Noise Ratio
Stereo Crosstalk
-70 dB @ 1kHz
Audio Maximum I/O Levels
Maximum Load
Input Impedance
3.1Vp-p
2k Ohms, unbalanced
10k Ohms
Total Harmonic Distortion and Noise
Models with Microphone Support
Microphone Type
0.017%,F=20-20KHz, RL=2K Ohm, Vout=1 Vrms
Electret
Audio Connector
3.5mm stereo jack (pink) to microphone
3.5mm stereo plug (pink) to CPU
10k Ohms
Input Impedance
Maximum Input Level
Maximum Output Level
Models with RS232 Support
RS232 Connectors
1 V, unbalanced
1 V, unbalanced
RJ45 female to device
9D female to CPU
RS232 Baud Rate
RS232 Compatibility
General
57.6K bps maximum (no adjustment for baud rate is needed)
RXD, TXD, RTS, DTR, CTS, DSR, DCD
Interconnect Cable
Remote and Local Unit Power
CAT5/5e/6 Solid UTP EIA/TIA 568 B wiring w/ male RJ45 connectors
120V at 60Hz-9VDC/1.0A via AC adapters (2)
-or-
230V at 50Hz-9VDC/1.5A via AC adapters (2)
Size (In.) WxDxH
Regulatory Approvals
5.05x3.1x1.235
RoHS
Distances and Maximum Supported Resolutions for CAT5, CAT5e and CAT6 Cables
Unshielded Twisted Pair (UTP) Resolutions
Shielded Twisted Pair (STP) Resolutions
UTP CABLE
CAT5/5e
CAT5/5e/6
CAT5/5e/6
DISTANCE (feet) RESOLUTION
STP CABLE
CAT5/5e/6
CAT5/5e/6
CAT5/5e/6
DISTANCE (feet)
RESOLUTION
1000
800*
600
1920x1200 at 60Hz
1920x1440 at 60Hz
2048x1536 at 60Hz
800**
600
400
1920x1200 at 60Hz
1920x1440 at 60Hz
2048x1536 at 60Hz
*The performance of CAT6 unshielded, is not guaranteed
beyond 800 feet.
**The performance of shielded CAT5, CAT5e and CAT6
shielded cable is not guaranteed beyond 800 feet.
Download from Www.Somanuals.com.1A5ll Manuals Search And Download.
NTI XTENDEX Extenders
INTERCONNECTION CABLE WIRING METHOD
The connection cable between the remote and local is terminated with RJ45 connectors and must be wired according to the
EIA/TIA 568 B industry standard. Wiring is per the table and drawing below.
Pair 3
Pair 2
Pair 1
Pair 4
Pin Wire Color
Pair
2
Function
1
2
3
4
5
6
7
8
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
T
R
T
R
T
R
T
R
2
3
1
1
3
4
4
T
T R
R
R
8
T R T
3
+
1
+
2
-
4
-
5
+ -
6 7
+ -
Figure 11- View looking into RJ45 female
TROUBLESHOOTING
Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications. We
make every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this
product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise. If the
answer is not found in the chart, please check the FAQs (Frequently Asked Questions) at our website at
7070 worldwide. We will be happy to assist in any way we can.
Problem
Cause
Solution
Remote or Local Unit
green power LED does not
illuminate
•
Power supply is not connected or
plugged-in.
•
•
•
•
Make sure outlet is live and AC adapter is plugged-in.
(one for the Remote and one for the Local)
Make sure 9VDC jack is fully connected
•
•
One or more video cables is loose
or disconnected.
No power to Remote or Local
Units.
Check all video cable connections
No Video on monitor
Make sure green LEDs are illuminated for local and
remote. If not, see solutions for problem above.
With all the cables properly connected, reboot the CPU.
Check cable connections. Make sure they are snapped-
in properly and completely and reboot.
•
•
•
Video Cable was not attached
when CPU was booted.
CAT5 cable is not connected.
All Video Cables are not firmly
seated.
•
•
Video Picture is not sharp
or is smeared
•
Check all connections. Make sure all cables are fully
seated.
•
•
CAT5 cable is too long.
The CAT5 cable is not properly
connected.
•
•
Verify length is within specified limits-1000'.
Check cable connections. Make sure they are snapped-
in properly and completely.
•
Video not adjusted
•
Check cable connections and power cycle. See page 12
for video quality adjustment instruction.
Download from Www.Somanuals.com.1A6ll Manuals Search And Download.
NTI XTENDEX Extenders
Problem
Cause
Solution
The picture on the monitor The video cable was not attached to
With the cables all properly connected, reboot the CPU.
is black and white, rather
than color
the CPU when it was booted.
A constant vertical wobble CAT5 cable is too close to a strong
Reroute CAT5 cable if possible.
appears down the screen
Monitor sometimes loses
sync, causing it to go
power source.
•
Electrical power system is very
•
•
Make sure the interconnection cable is not near any
power lines.
Check cable connections. Make sure they are snapped-
in properly and completely.
noisy, particularly the ground.
The CAT5 cable is not properly
connected.
blank for a second or two
•
Wrong or missing
characters from those
typed
The keyboard may be in the wrong
mode.
•
•
Disconnect keyboard at Remote Unit end and reconnect.
Reboot the system.
CPU doesn't detect the
keyboard and the mouse
•
•
Keyboard cable or mouse cable
are loose or reversed
Cat 5 cable is too long
•
•
•
Check cable connections
Cat 5 cable can be no more than 1000 feet in length
IBM Scroll Point mouse is
not recognized by CPU
Only one IBM Scroll Point mouse is
connected at either the Local or
Remote unit
In order for an IBM Scroll Point mouse to be recognized,
an IBM Scroll Point mouse must be connected at both
the Local and Remote extender units. Otherwise it will
be recognized and work only as a Microsoft Intellimouse.
Check the user's manual for the monitor, projector, or
display equipment for an "automatic adjustment" or
"auto-configure". This is most common to LCD type
monitors.
Image is not displayed
properly, lacks definition
Signal is being skewed by the CAT5
cable and not being received correctly
by the monitor .
•
Models with RS232 Support
No RS232 communication
•
•
One or more RS232 cables is
loose or disconnected
•
•
Check all RS232 cable connections
Check all cable connections
Models with audio Support
No audio
Audio cable is not properly
plugged in
•
•
Speakers are not plugged in
CAT5 cable is not properly
connected
•
•
Verify speakers are connected and powered
Check CAT5 cable connections
Microphone not working at
either Local or Remote
•
Active microphone not set
properly
•
Set microphone to be active where it is connected, at
either the Local or Remote unit (not both). See pages 12
(models without keyboard support) or 13 (models with
keyboard support) for instruction on setting the active
microphone.
INDEX
Audio connectors, 7
Cat5 cable wiring, 16
Command mode, 13
DDC, 12, 13
extension cables, 2
Feature support, 1
install the Local Unit, 6
IR controls, 1
limitations, 5
materials included, 2
microphone use, 5, 10
Mode button, 12
RS232 adapter, 8
Technical Specifications, 15
test patterns for skew, 12
Video quality adjustment, 12
install the Remote Unit, 9
installation preparation, 5
Download from Www.Somanuals.com.1A7ll Manuals Search And Download.
NTI XTENDEX Extenders
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network
Technologies Inc at 800-742-8324 (800-RGB-TECH) or 330-562-7070 or visit our website at http://www.networktechinc.com for
information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
Note: CAT5 connection cable used between NTI XTENDEX Series Local and Remote or any XTENDEX Series products
should not be run underground, outdoors or between buildings.
WARNING: Outdoor or underground runs of CAT5 cable could be dangerous and will void the warranty.
Manual 060 Rev. 2/6/08
Download from Www.Somanuals.com.1A8ll Manuals Search And Download.
|