CONFERENCE ROOM SCHEDULER
AN
OPEN APPLICATION INTERFACE (OAI)
INSTALLATION GUIDE
NEC America, Inc.
NDA-30007-003
Revision 3.0
January, 1997
Stock # 241732
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
CONTENTS
TABLE OF CONTENTS
Page
Chapter 1 - Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Application Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Database Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mat Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2 - Application Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 1 – Application Characteristics (Both Components). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 2 – Primary Configuration Parameters (Both Components). . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 3 – Facilities (Conf_Room_Sch only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Step 4 – Secondary OAI Configuration Parameters (Conf_Room_Sch only). . . . . . . . . . . . . . . . . 5
Step 5 – User-Defined Parameters (Both Components). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Conf_Room_Sch User-defined Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Conf_Room_Sch User-defined Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Conf_Room_Sch_Rpt User-defined Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter 3 - Database Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Conference Room Database Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Field Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Employee Identification Database Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Field Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 4 - MAT Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AOKC COMMAND: (Assignment of OAI Key Codes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AKYD COMMAND: (Assignment of Dterm Function Key) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
NDA-30007 Revision 3.0
Page i
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Conference Room Scheduler Installation Guide
This Page Left Blank.
Page ii
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
Introduction
Chapter 1 Introduction
This guide provides specific field entries that need to be made in the process of
installing and configuring Conference Room Scheduler. In addition to this guide,
use the following manuals for this installation:
•
Applications Manager (APM) Installation Manual – Contains step-by-step
instructions for installing the software from the release media.
•
Applications Manager (APM) Operations Manual – Explains how
applications like Conference Room Scheduler are configured in the APM
environment, using the entries and values provided in this guide.
•
NEAX2400 System Manuals – Give very detailed explanations about the
assignments that need to be made through the Maintenance Administration
Terminal (MAT) commands on the NEAX2400.
Briefly, the installation and set up of Conference Room Scheduler involves the
following processes:
Software Installation
Conference Room Scheduler software must first be loaded from the release media.
Log in to the APM Platform Management Menu, select the Installation of
Applications/Packages option, and follow the instructions provided in the APM
Installation Manual to complete this part of the installation.
Application Configuration
Conference Room Scheduler is internally supported by the APM and must be
information that must be entered into this APM configuration file. Conference
Room Scheduler is comprised of two components, both of which must be
configured. Use the instructions provided in the APM Operations Manual to
make the entries provided in this section.
Database Requirements
Conference Room Scheduler requires two application databases which are
constructed and maintained through the APM Database Administration option. For
each application database, the process begins with the creation of a master
definition file and its related master database. Then, for each, an application
definition file is constructed which enables the processing of the master files into
must be included in these definition and database files. Use the instructions
provided in the APM Operations Manual to make the entries contained in this
section.
Note: Conference Room Scheduler maintains a 90-day calendar of room reservations.
This 90-day period dynamically rotates so that it always extends from the current
day only if Conference Room Scheduler is set to automatically update its data-
base on a daily basis. Under Control Options on the APM System Administra-
tion menu, use the Database command to select the Conference Room Scheduler
database and designate a daily time at which it will be automatically updated.
NDA-30007 Revision 3.0
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Conference Room Scheduler Installation Guide
Mat Assignments
There are data settings which must be assigned at the NEAX Maintenance
Administration Terminal (MAT) before Conference Room Scheduler will function.
Chapter 4 of this guide specifies the necessary commands and the values at which
they are to be set. Use the instructions provided in the NEAX2400 IMS System
Manuals to make the entries contained in this section.
The installation process, including its presentation in this manual and reference to
other manuals that are necessary, is illustrated below:
ASSET MASTER
INSTALLATION REQUIREMENTS
Discussed in:
Instructions in:
Chapter 1
Introduction
Software Installation
Software Release Media
APM Installation
Manual
Chapter 2
Application Characteristics
APM Operations
Manual
Application Configuration Primary Parameter Configuration
OAI Facilities (Optional)
OAI Configuration Parameters (Optional)
User-Defined Parameters
Chapter 3
Database Requirements
Master Definition File
Master Database File
APMOperations
Manual
Application Definition File
Application Database
Chapter 4
MAT Assignments
NEAX2400 IMS
NEAX2400 IMS
System Manuals
Maintenance Administration
Terminal (MAT) Assignments
AOKC (Assignment of OAI Key Codes)
term
AKY1 (Assignment of D
Function Keys)
Page 2
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
Application Configuration
Chapter 2 Application Configuration
Conference Room Scheduler is configured into the APM system using the Add
function of the Application Configuration option on the APM System
Administration menu:
1. Enter the APM option from the APM Platform Management Menu.
2. Enter the System Administrator password at the APM password screen.
3. Enter the Application Configuration option from the System Administration
menu.
This section contains the information that should be entered to the configuration
file for Conference Room Scheduler. The following components must be
configured:
•
Conf_Room_Sch
–
The component application that maintains the real-
time database and interacts with the user at the
term
D
.
•
Conf_Room_Sch_Rpt – The component application that displays or prints
the real-time database.
For specific instructions on what these parameters mean and how to make these
entries, use the APM Operations Manual.
Step 1 – Application Characteristics (Both Components)
In the APM Application Configuration option, make the entries shown below for
the components:
Parameter
Description
Conf_Room_Sch
Conf_Room_Sch_Rpt
OAI Application
Indicates whether or not (Yes
or No) this component
communicates with the
NEAX2400 using OAI
processes.
Y
N
CRT Application
Indicates whether or not (Yes
or No) this component requires
a terminal screen that is of the
same type as the one used by
the APM.
N
N
Y
N
Communication Queue Indicates whether or not (Yes
or No) this non-OAI
application needsan IPC queue
to communicate with other
processes.
NDA-30007 Revision 3.0
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Application Configuration
Conference Room Scheduler Installation Guide
Step 2 – Primary Configuration Parameters (Both Components)
On the APM Configuration Entry screen, make the entries shown below to the
parameters indicated:
Parameter
Description
Conf_Room_Sch
Conf_Room_Sch_Rpt
Application Name
Indicates the name to be
displayed in the APM menus.
This name is displayed in the
same way it is entered here
(i.e., capital letters, lower case,
etc.)
Conf_Room_Sch
Conf_Room_Sch_Rpt
Executable Filename
Group
Indicates the path name of the
executable file.
/oai/app/c_rm
/oai/app/c_rm.rpt
(make no entry)
(Neither component is a
member of a group of
applications.)
(make no entry)
Response Mode
Indicates the default value
since the components do not
belong to a group.
I(gnore)
N(o)
I(gnore)
N(o)
Initialization Batch
Indicates that neither
component is to be initialized
automatically when the OAI
system is initialized.
Termination Mode
Indicates how the APM is to
notify the component to
terminate.
M(essage)
/oai/log/dbg/cr.dbg
0
K(ill signal)
/dev/null
0
Standard Output
Indicates where the component
output is sent.
Number of Restarts
Indicates that the APM is not to
restart either component if it
terminates erroneously.
Page 4
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
Application Configuration
Step 3 – Facilities (Conf_Room_Sch only)
According to instructions in the APM Operations Manual, designate the
following NEAX2400 facilities for the Conf_Room_Sch component using the
Facilities command on the APM Configuration Entry screen:
MRFI
Mode Release Facility (I)
MRFR Mode Release Facility (R)
MSF
NTF
OAI Mode Set Facility
Number Transfer Facility
Terminal Control Facility (D)
TCFD
Note: The same MSF identification number (i.e., from 128 to 192) that is selected in the
APM during Step 3 must be assigned to Conference Room Scheduler at the NEAX
Step 4 – Secondary OAI Configuration Parameters (Conf_Room_Sch only)
Using the OAI-Conf command on the APM Configuration Entry screen, make the
entry shown for each of the following parameters required by Conf_Room_Sch.
Use the instructions provided for this option in the APM Operations Manual:
Parameter
Database Name #1
Entry
Definition
/oai/db/cur/crminfofil
Indicates the path name of the database
containing the conference room
information. This name must be the
first listed database. The database
filename (i.e., crminfofil), listed here
with its path, should be used as the
name of the corresponding Application
Database Name #2
/oai/db/cur/crmidfile
Indicates the path name of the database
containing the employee identification
data. This name must be the second
listed database. The database filename
(i.e., crmidfile), listed here with its
path, should be used as the name of the
corresponding Application Definition
Timeout Value #1
Tenant Number
90
0
Designates the number of seconds
Conf_Room_Sch will wait for user
term
input before it will release the D
.
Specifies the number of the tenant that
Conf_Room_Sch serves.
NDA-30007 Revision 3.0
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Application Configuration
Conference Room Scheduler Installation Guide
Definition
Parameter
Entry
Source Link Name
OAI1X25
Identifies the port on the source side of
the communication link; entry should
correspond to a link name in the APM
system configuration file.
Destination Link Name
Association Recovery
PBX1X25
60
Identifies the port on the destination
side of the communication link; entry
should correspond to a link name in the
APM system configuration file.
Designates the number of seconds
Conf_Room_Sch will wait before
trying to re-establish an association
with the NEAX that has been released.
Step 5 – User-Defined Parameters (Both Components)
Make the following additional parameter entries through the UserDefined
command on the APM Configuration Entry screen.
Conf_Room_Sch
User-defined
Parameters
User-defined
Entry
Definition
#1
4
Indicates the length of the identification
number assigned to each authorized
employee (maximum 9 digits.)
#2
/oai/app/data/crdata
Specifies the path name of the
reservation database built and
maintained by Conf_Room_Sch as users
make, modify, and cancel conference
room reservations. (This path must be in
the same partition as /oai.)
Page 6
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
Application Configuration
Conf_Room_Sch
User-defined
Parameters
User-defined
Entry
Definition
#3
/oai/app/data/tmpcr
Specifies the path name of a temporary
database that serves as a backup when the
conference room reservation database is
being updated. (This path must be in the
same partition as /oai.)
Conf_Room_Sch_
Rpt User-defined
Parameters
User-defined
Entry
Definition
#1
1 or 2
Indicates how Conf_Room_Sch_Rpt
sorts and displays names from the 90-day
reservation database to create various
reports of the data and uses the following
values:
1. Sort by the name in the first position.
2. Sort by the name in the second posi-
tion.
For example: If names are entered to the
database in the order first name then last
name, then selection of option #1 sorts
the database by the first name and option
#2 sorts the database by the last name. On
the other hand, if names are entered to the
database in the order last name then first
name, then selection of option #1 sorts
the database by the last name and option
#2 sorts the database by the first name.
#2
Conf_Room_Sch
Indicates the name of the other
component with which
Conf_Room_Sch_Rpt must
communicate in order to create its
reports. This name must be entered in
exactly the same way as the name entered
to the “Application Name” parameter in
Step 2.
This completes the configuration of Conference Room Scheduler in the APM. Now
NDA-30007 Revision 3.0
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Application Configuration
Conference Room Scheduler Installation Guide
This Page Left Blank.
Page 8
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
Database Requirements
Chapter 3 Database Requirements
Conference Room Scheduler requires three databases (i.e., Conference Room,
Employee Identification, and Reservation). Two of these databases need to be
constructed and thereafter maintained through the APM; the third database (i.e.,
Reservation) is built by Conference Room Scheduler itself while it is running.
Databases are created through the Database Administration option on the APM
System Administration Menu. Database creation involves the following 4-step
process for each of the two required databases:
Step 1 – Create
Master
Definition File
Step 2 – Build
Master
Database File
Step 3 – Create
Application
Definition File
Step 4 – Process
Application
Database
1. Create a Master Definition File: This step involves creating the master defini-
tion file that defines the fields in the master database file. Generally one master
definition file parents databases for several applications. Conference Room
Scheduler, however, requires two separate sets of files, one for the conference
room data and one for the employee identification data.
2. Build a Master Database File: This step involves entering data (e.g., confer-
ence room numbers and number of people accommodated) into the master da-
tabase fields that were just defined in Step 1.
3. Create an Application Definition File: In this step, a definition file is created
which defines how data from the master files is to be converted to meet the
needs of Conference Room Scheduler. The database names in the application
configuration file (crminfofil and crmidfile) must be used for these definition
file names.
4. Process the Application Database: In this step, the Master Database input is
converted to database files according to the definitions created in Step 3, using
the Process/Install Application Databases option on the APM Database Admin-
istration menu. When the Process command is activated, data is drawn from the
master database and converted to the formats specified in the corresponding ap-
plication definition file. The Install command is then activated to enable Con-
ference Room Scheduler to access the database.
NDA-30007 Revision 3.0
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Database Requirements
Conference Room Scheduler Installation Guide
Instructions
The information required in all four steps for each Conference Room Scheduler
database is provided in table form on the following pages. Using this information
alongside of the procedural instructions provided in the APM Operations
Manual, enter the Database Administration option on the APM System
Administration Menu and build the Conference Room Scheduler databases, one at
a time. Any messages displayed during these steps are addressed in the Process and
Error Messages chapter of the APM Operations Manual.
Note: Remember to complete STEP 4, Process the Application Database, for each
database after entering the information on the following pages in STEPS 1
through 3.
Conference Room Database Information
This database contains all conference rooms, by room number, which are to be
managed by the system and, for each, the number of people the room can
accommodate. Name the master definition file crminf_m and the application
definition file crminfofil.
Application
Definition
File
Master
Database
Master Definition File
Field Description
Min. Max.
Value Value
Typical
Entry
Type Size
Data Type
N
N
5
4
0
0
99999 Long Integer
9999 Long Integer
315
25
Conference Room
Capacity
Field Definitions
The following are the definitions for each field in the Conference Room Database:
•
Conference Room – A number that identifies the room, lying within the
range from 0 to 99999.
•
Capacity
–
The number of people that the identified room can
accommodate, up to 4 digits in length.
Page 10
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
Database Requirements
Employee Identification Database Information
This database contains the identification number and name of all employees who
are authorized to use the system. Name the master definition file crmid_m and the
application definition file crmidfile.
Application
Master Definition File
Definition
File
MasterDatabase
Field Description
Min.
Value
Max.
Value
Type Size
Data Type
Typical Entry
Employee
Identification
N
A
9
8
0
999999999 Long Integer
ASCII
585273
Employee Name
Thompson
Field Definitions
The following are the definitions for each field in the Employee Identification
Database:
•
Employee Identification
–
A number that identifies the employee (e.g.,
social security number), lying within the range
of 0 to 9-digits in length.
•
Employee Name
–
The name of the employee associated with the
identification number. The 90-day reservation
database is later sorted for display and reporting
purposes by this employee name. Coordinate
the order in which this name is entered (e.g., last
name, first name) with the way in which the
database is configured to sort.
(Both Components) on page 6 for sorting
information.
Note: Conference Room Scheduler maintains a 90-day calendar of room reservations.
This 90-day period dynamically rotates so that it always extends from the current
day only if Conference Room Scheduler is set to automatically update its data-
base on a daily basis. Under Control Options on the APM System Administra-
tion menu, use the Database command to select the Conference Room Scheduler
database and designate a daily time at which it will be automatically updated..
NDA-30007 Revision 3.0
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Database Requirements
Conference Room Scheduler Installation Guide
This Page Left Blank.
Page 12
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
MAT Assignments
Chapter 4 MAT Assignments
This guide assumes that data settings that affect the operation of all OAI software
on a system-wide basis have already been assigned on the NEAX Maintenance
Administration Terminal (MAT). Such settings include, for instance, system index
values and assignment of Interface I/O Port Data in the Interface Processor (IP).
For more information about these system data settings and the MAT commands
described below for Conference Room Scheduler, refer to the OAI Module
Installation Manual for the NEAX2400 IMS, the NEAX2400 IMS Command
Manual, the NEAX2400 IMS Job Specification Manual, and the NEAX2400
IMS Programming Manual.
Conference Room Scheduler requires MAT assignment of the Mode Set Facility
terms
(MSF) to an OAI-assigned function key on all D
affected by application. This
process involves assigning the MSF and its Operation Code (Op-Code), configured
for Conference Room Scheduler in the APM Application Configuration option, to
one of the 14 OAI Key Codes. (The MSF Op-Codes range from 128 to 191;
available for on-screen viewing through the Providers command in the APM
Application Configuration option.) Each of the OAI Key Codes corresponds to an
term
AKY1 Function Key Index (FKI) value which is then assigned to the specific D
function key. This process is illustrated below.
PBX Correspondence of
AOKC
OAI
AKYD
Function
KeyIndices
> 34
Key Codes
1 <
MAT
MAT
APM
> 35
> 36
> 37
> 38
> 39
> 40
> 41
> 42
> 43
> 44
> 45
> 46
2 <
3 <
4 <
5 <
6 <
7 <
8 <
9 <
10 <
11 <
12 <
13 <
14 <
AKYD
Application
Configuration
AOKC
Command
Command
Assignment of
Corresponding
MAT Function
Key Index to a
. . . . .
. . . . .
. . .
Designation of
Facility (Type)
and its Op-Code
for Use by
Assignment of
an OAI Key Code
(between 1 and 14)
to the Same
. . .
term
specific D
Conference
Function Key
Facility Type
Room Scheduler
and Op-Code
> 47
Figure 4-1 OAI Function Key Assignment
term
A knowledge of the D
stations in the NEAX system and which ones will have
access to Conference Room Scheduler is necessary to using the following
commands:
NDA-30007 Revision 3.0
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAT Assignments
Conference Room Scheduler Installation Guide
AOKC COMMAND: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its Op-Code that was
configured in the APM for Conference Room Scheduler to one of the 14 OAI Key
Codes in the MAT.
1. Select an unused OAI Key Code, from 1 to 14. To determine what Key Codes
are available for assignment, use the LOKC command to list the AOKC Key
Codes that are already assigned.
2. Enter MSF as the facility to be assigned to the selected Key Code, using the val-
ues on the screen.
3. Enter the same Op-Code that was configured for Conference Room Scheduler
in the APM. If necessary, retrieve it using the Provider command on the APM
Configuration Entry screen.
term
AKYD COMMAND: (Assignment of D
Function Key)
terms
This command is used to assign key data on the D
that are to be used to access
Conference Room Scheduler. MAT Function Key Indexes #34 to #47 have been
designated for use in the OAI system and correspond to the 14 OAI Key Codes as
term
illustrated on the previous page. The AKYD command is used to assign a D
function key to the specific MAT Function Key Index that, in turn, corresponds to
the previously assigned OAI Key Code. This command must be used to assign the
term
function key on each D
that is to be set up with access to Conference Room
Scheduler.
1. Enter the same tenant number that is configured for Conference Room Schedul-
term
2. Enter the station number of the D
signed.
on which the function key is being as-
Page 14
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference Room Scheduler Installation Guide
MAT Assignments
term
3. Enter to the D
function key field the MAT Function Key Index that corre-
sponds to the previously assigned OAI Key Code.
PBX Correspondence of
AOKC
OAI
AKYD
Function
KeyIndices
> 34
Key Codes
1 <
MAT
MAT
APM
> 35
> 36
> 37
2 <
3 <
4 <
AKYD
Application
Configuration
AOKC
Command
Command
. . . . .
. . . . .
. . .
> 38
> 39
> 40
> 41
> 42
> 43
> 44
> 45
5 <
6 <
7 <
8 <
Function Key
Index #43
Conference
Room Scheduler
configured
for
OAI Key
Code #10 given
MSF facility type
and
. . .
assigned to
term
D
Function
9 <
MSF #129
Key #3
Op-Code #129
10 <
11 <
12 <
13 <
14 <
> 46
> 47
Figure 4-2 OAI Function Key Assignment Example
The example above indicates that MSF #129 is configured for Conference Room
Scheduler and is assigned through the AOKC command to OAI Key Code 10. OAI
term
Key Code 10 corresponds in the PBX to MAT Function Key Index 43. Each D
in the system that is to access Conference Room Scheduler has function key 3
assigned to MAT Function Key Index 43 via the AKYI command. Now whenever
term
a phone user presses function key 3 on any assigned D , MSF 129 initiates
communication with Conference Room Scheduler.
Conference Room Scheduler is now installed and ready to be initialized. Enter the
APM Operations Menu and initialize Conference Room Scheduler according to
instructions provided in the APM Operations Manual.
NDA-30007 Revision 3.0
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAT Assignments
Conference Room Scheduler Installation Guide
This Page Left Blank.
Page 16
NDA-30007 Revision 3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|