Conferencing
Establishing a Conference Call
Repeat for additional parties
Extension Number
FLASH
8
2
6
?
?
?
(Talking)
(Talk)
Trunk Code Telephone
Intelligent Hybrid System
9
?
?
FLASH
‹
You can repeat this operation to add additional parties. You may
be able to have up to 8 parties in total (including your extension).
<press twice>
Single Line Telephone
User Guide
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation
with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Business Solutions
Ltd has no obligation to provide any updates or corrections to this manual. Further, NEC Business Solutions Ltd also reserves
the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation
is made that this manual is complete or accurate in all respects and NEC Business Solutions Ltd shall not be liable for any
errors or omissions. In no event shall NEC Business Solutions Ltd be liable for any incidental or consequential damages in
connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied or reproduced without prior written consent of NEC Business
Solutions Ltd.
Copyright © 2004 by NEC Business Solutions Ltd
All Rights Reserved.
NEC Business Solutions Ltd
633-647 Springvale Road,
Mulgrave VIC 3170
Issue 1.2
October 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering Calls
Placing Calls
Picking up another Extension’s Call
Placing an Outside Call
In same
Group
Trunk Code
Telephone Number
8
8
7
6
6
1
7
9
5
9
?
?
?
?
In other
Groups
‹
Listen for Dial Tone before dialling the Telephone Number.
Extension Number
Pickup for
Specified
Extension
?
?
?
Placing an Intercom Call
Extension Number
‹
System programming is required to allow Group Call Pickup. Ask your NEC Authorised Supplier for details.
?
?
?
‹
Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialling “1” changes voice/ring mode (where the destination is a Topaz Telephone).
Hold / Transferring Calls
Placing a Call on Hold / Retrieving a Held Call
FLASH
FLASH
Hold
Retrieve
Placing Calls Quickly
(Talking)
(Don’t hang up)
Abbreviated Dialling <for outside calls>
‹
‹
If you go on hook, the held call will ring back.
This operation puts your call on Exclusive Hold. Other extension users can not take the call off Hold.
Common/Personal
Abbv. Bin No.
Common/
Personal
Abbv.
?
?
?
Retrieving a Held Outside Call
Trunk No.
you want to retrieve
Group Abbv. Bin No.
Group
Abbv.
7
7
2
?
?
8
1
4
?
?
?
‹
Common/Personal Abbreviated Dialling Bins are numbered as follows (by default):
2-digit dialling: Common = 00-79, Personal = 80-99, or
3-digit dialling: Common = 000-899, Personal = 990-919.
Transferring a Call to another Extension
‹
‹
Single Line Telephones cannot store a number into an Abbreviated Dialling Bin. For this you must use a
Display Topaz Telephone or PC Programming application. Ask your NEC Authorised Supplier for details.
Extension Number
FLASH
?
?
?
System programming is required to provide Group Abbreviated Dialling. Ask your NEC Authorised
Supplier for details.
(Talking)
(Announce)
5
2
Download from Www.Somanuals.com. All Manuals Search And Download.
If your call doesn’t go through…
Placing Calls Quickly
Setting / Answering a Message Waiting Indication
Last Number Redial <for outside and intercom calls>
Set
8
8
4
4
1
1
#
(Hear Busy Tone or No Answer)
‹
Intercom numbers can also be stored under Last Number Redial. (System programming is required. Ask
your NEC Authorised Supplier for details.)
Your phone’s
MW Indicator
is flashing
Answer
‹
‹
When you set MW, the called party’s MW Indicator starts to flash.
If your call doesn’t go through…
When you answer MW, the MW Indicator shall automatically go off when the called party answers.
Setting Camp On / Callback / Trunk Queuing
Cancelling a Message Waiting Indication (at originating extension)
Extension Number
you want to cancel MW
<Camp On>
Wait without
hanging up
0
8
7
1
?
?
?
(Hear Busy Tone,
No Answer, or
Trunk Unavailable)
Wait for the
system to call
you back
<Callback>
Clearing All Message Waiting Indications (at any extension)
‹
‹
<Camp On>
<Callback>
For Intercom Call, when you hear ringing, wait for the called party to answer.
For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number.
8
7
3
For Intercom Call, when your phone starts the ringing, lift handset and wait for the called
party to answer.
For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and
begin dialling the telephone number.
‹
Clear all messages (you have left for other extensions and messages other extensions have left for you).
Cancelling Camp On / Callback / Trunk Queuing
Answering Calls
8
7
0
Answering an Outside / Intercom Call
(When Camp On set)
(Ringing)
‹
Each type of incoming call can have its own distinctive ringing pattern. Ask you NEC Authorised Supplier
for details.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|