Express5800 series
System Configuration Guide
Express5800/R320a-E4,R320b-M4
[2010.10]
(Windows2008 R2 model)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Low-End Rack mount model
N8800-155 Express5800/R320a-E4(4C/E5504-W28EX64) no-Memory, no-HDD
Intel® Xeon® Processor E5504 (2.0GHz) x1, 4MB 3rd cache, QPI speed 4.8GT/s
no-Memory, no-HDD,
DVD-RAM drive x1, 1000BASE-T 2ch, PCI slot x2
Windows Server 2008 R2 Enterprise supported.
x64
NEC EXPRESSBUILDER (NEC ESMPRO Manager/Agent included)
Intel® Xeon®
Processor E5504
Windows Server 2008
R2 Enterprise
(25CAL)
Active UpgradeTM include as standard
Mid-Range Rack mount model
N8800-154 Express5800/R320b-M4(6C/X5670-W28EX64)no-Memory,no-HDD
Intel® Xeon® Processor X5670 (2.93GHz) x1, 12MB 3rd cache, QPI speed 6.4GT/s
no-Memory, no-HDD,
DVD-RAM drive x1, 1000BASE-T 2ch, PCI slot x4
Windows Server 2008 R2 Enterprise Edition supported.
x64
EXPRESSBUILDER(NEC ESMPRO Manager/Agent included)
Intel® Xeon®
Processor X5670
Windows Server 2008
R2 Enterprise
(25CAL)
Active UpgradeTM included as standard
Tower conversion kit
N8843-003 Tower conversion kit
About ft Server Control Software
ft Server Control Software controls the operations of the NEC Express5800/ft series main components.ft Server
Control Software update may be required to support a new option.
How to confirm the ft Server Control Software Version
On the "Programs and Features" of the Control Panel,
select "ftServer Control Software" from the list of programs.
The current version is Ver. 7.0. (As of October, 2010)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
R320a-E4, R320b-M4
External Design
450
689
736
483
178
Tower conversion kit
804
220
592
327
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
R320a-E4 Quick configuration sheet
CPU/IO module#0
DIMM slots x12
LAN
1000BASE-T x1
Intel® Xeon®
Processor
E5504
Empty
1000BASE-T x1
CPU socket×2
Management LAN ×１
#2 Empty
Low-profile PCI-Express x4 x2
(x8 socket)
2.5-inch disk bays x8
#1 Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
PSU
Empty
CPU/IO module#1
DIMM slots x12
LAN
Intel® Xeon®
Processor
E5504
1000BASE-T x1
1000BASE-T x1
Empty
CPU socket×2
Management LAN ×1
#2 Empty
#1 Empty
Low-profile PCI-Express x4 x2
(x8 socket)
2.5-inch disk bays x8
Empty
Empty
Empty
Empty
Empty
Empty
Empty
PSU
Empty
DVD-RAM
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
R320b-M4 Quick configuration sheet
CPU/IO module#0
DIMM slots x12
LAN
1000BASE-T x1
Intel® Xeon®
Processor
X5670
Empty
1000BASE-T x1
CPU socket x 2
Management LAN
#4 Empty
#3 Empty
Full-height PCI-Express x4×2
(x8 socket)
#2 Empty
#1 Empty
Low-profile PCI-Express x4×2
2.5-inch disk bays×8
(x8 socket)
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
PSU
CPU/IO module#1
DIMM slots x12
LAN
Intel® Xeon®
Processor
X5670
1000BASE-T x1
1000BASE-T x1
Empty
Management LAN
CPU socket x 2
#4 Empty
#3 Empty
Full-height PCI-Express x4 x2
(x8 socket)
#2 Empty
#1 Empty
Low-profile PCI-Express x4 x2
(x8 socket)
2.5-inch disk bays×8
Empty
Empty
Empty
Empty
Empty
Empty
Empty
PSU
Empty
DVD-RAM
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
CPU
CPU socket
Intel® Xeon® Processor E5504 / X5670
N8801-041 2GHz, Set of CPU x2
N8801-043 2.93GHz, Set of CPU x2
Set of CPU x2
Note)Select the same CPU
as the standard CPU.
A pair of processors
CPU/IO module#0
CPU/IO module#1
N8801-041 for N8800-155F(R320a-E4)
N8801-043 for N8800-154F(R320b-M4)
Empty
Empty
Intel® Xeon® Processor E5504 / X5670 x1 Standard
Intel® Xeon® Processor E5504 / X5670 x1 Standard
Memory
DIMM slots
For R320a-E4 (DDR3-1333 Registered DIMM set)
N8802-047
2GB(2GB×1)x2
N8802-048 12GB(4GB×3)x2
N8802-049 24GB(8GB×3)x2
For R320b-M4 (DDR3-1333 Registered DIMM set)
N8802-044
2GB(2GB×1)x2
N8802-045 12GB(4GB×3)x2
N8802-046 24GB(8GB×3)x2
*4GB or larger size is recommended when using Hyper-V
Set of 2 or 6 DIMMs
Memory configuration pattern
* Only the following patterns are supported.
DIMM Slot number
Notes
Standard CPU side
2nd CPU side
Total MEM
2GB*1
4GB
1
2
2
2
2
2
2
4
4
8
8
2
3
4
5
6
12 11 10
9
8
7
CPU
Required system disk
2
2
2
2
2
4
4
8
8
8
6GB
2
2
2
2
4
4
8
8
8
8GB
2
2
2
73.2GB or larger
10GB
12GB
12GB
24GB
24GB
36GB
2
2
2
4
Single
4
4
146.5GB or larger
300GB
4
8
4
8
4
8
48GB
8
2GB*1
4GB*1
6GB
2
2
2
2
2
2
2
2
2
4
4
4
8
8
8
2
2
2
2
2
2
2
2
2
4
4
4
8
8
8
2
8GB
73.2GB or larger
2
10GB
12GB
16GB
20GB
24GB
24GB
36GB
48GB
48GB
72GB
96GB
2
2
2
2
2
2
2
4
4
4
8
8
8
2
2
2
2
4
4
4
8
8
8
2
2
2
2
4
4
4
8
8
8
2
2
2
2
4
4
4
8
8
8
2
2
2
2
2
2
Twin
2
2
2
2
2
2
146.5GB or larger
300GB
2
4
2
4
2
4
2
4
2
4
2
4
4
8
4
8
4
8
4
8
4
8
4
8
*1: Interleave is enabled except 2GB DIMM x1 per CPU configuration.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Internal HDD
Diskbays
Be sure to install by double of hard disk drives in order to have the RAID-1 configuration.
Also, both of the hard disk drives must have same capacity and rotational speed.
N8850-042
N8850-043
N8850-044
N8850-045
N8850-046
146.5GB HDD (10,000rpm)
300GB HDD (10,000rpm)
600GB HDD (10,000rpm)
73.2GB HDD (15,000rpm)
146.5GB HDD (15,000rpm)
Install 2x HDD (Same product code) as one set
Disk bays x8
Disk bays x8
CPU/IO module＃0
CPU/IO module＃1
#0
System Disk
#0
System Disk
#2
#4
#2
#6
#4
#6
Empty Empty Empty
Empty Empty Empty
Empty Empty Empty
Empty Empty Empty
Empty
Empty
#5
#3
#7
#1
#5
#3
#7
#1
Mirroring
The 73.2 GB of hard disk drive is recommended to install as system
drive in order to reduce the time to resynchronize,when the system
memory is below 20GB.
When the system memory is 20GB or more,the system Disk needs to be
146.5GB or larger. Also,300GB HDD is required when the system memory
is 48GB or more.
*The RDR resumes disk mirroring by performing quick copies of only data
changes, helping reduce the resynchronization time. However, please note that it
would be the whole copy when replacing with a new disk.
Server Management (EXPRESSSCOPE Engine2)
CPU/IO module#0
Onboard
RAS chip
R320a-E4 and R320b-M4 have the enhanced remote management function “EXPRESSSCOPE
Engine2” as standard.
Onboard
RAS chip
EXPRESSSCOPE Engine 2 (Standard)
CPU/IO module#1
*There is Management LAN port (100/10BASE-TX) on each CPU/IO module.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Display
D-sub 15 pin
Interface
Local procurement.
Display is NOT provided with the main unit. Please arrange locally.
Keyboard
USB
N8870-002AF Keyboard (USB) (Cable length 1.8m)
Not included in the main unit.
USB cable
[K410-177(1A)]
(1.5m)
Arrange as needed.
Mouse
Connect via keyboard
N8870-010A Mouse (USB) (Cable length 1.8m)
Not included in the main unit.
[Notes for Keyboard/Mouse]
Do not connect non-NEC-authorized USB devices.
FDD
[Notes for FDD]
Choose one form the following (Exclusive use)
N8160-81 External FDD
3.5-inchFDD(720KB/1.44MB)
USB
USB cable
[K410-177(1A)]
(1.5m)
Cable length 0.9m
[Discontinued on 2010/11/29]
Arrange as needed.
A tray to install the floppy disk drive is needed to install in the rack mount
system. (local procurement)
*Necessary when
using a tray
USB
N8160-86 Flash FDD
1.44MB
[Notes for Flash FDD]
For more details to use Flash FDD, please refer to Flash FDD User‘s Guide and the main unit’s User’s Guide.
Only one floppy drive or equivalent drive can be installed in the system.
The flash FDD does not support disaster recovery feature supported with backup software, including OS
standard feature.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
DVD-RAM
DVD-RAM
DVD-RAM drive (Standard)
[Notes for DVD-RAM drive]
The writing software is not provided for the DVD drive.
KVM switch unit
Required when connecting two or more servers.
N8191-10F
KVM switch unit(8Server/USB)
*When Keyboard/Mouse do not work after fail over of CPU/IO module, disconnect and reconnect the USB
cable or press the reset switch of the KVM Switch.
Sample configuration with KVM switch [N8191-10F]
Display/Keyboard extension cable
[K410-104A(03)]
KVM switch unit
[N8191-10F]
(Master)
USB
Switch unit connection cable
set [K410-118(XX)]
FT server
PS/2
* ft Server must be connected to the master
KVM switch when cascade connection.
PS/2
Switch unit connection cable
set [K410-119(1A)]
Express5800/100 Series
Express5800/100 Series
Switch unit connection cable
set [K410-119(XX)]
Keyboard
KVM switch unit
[N8191-10F]
(Slave)
PS/2
Mouse
[N8170-23]
Switch unit connection cable
set [K410-119(XX)]
Up to two KVM switch units
PS/2
Switch unit connection cable
set [K410-119(XX)]
Express5800/100 Series
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
17 inch LCD console unit
USB
Interface
Switch Unit Connection Cable Set (1.8m/3m/5m)
[K410-118(1A)] (1.8m)
[K410-118(03)] (3m)
[K410-118(05)] (5m)
D-sub 15pin
Interface
•Up to eight servers can be connected directly to the LCD console unit. Use optional
Server Switch Units to connect more than eight servers.
LCD Console Unit
A 17-inch LCD, keyboard, mouse, and Server Switch Unit (x8)
are integrated into the 1U LCD Console Unit.
- 17-inch LCD Console Unit (1U/8port) [N8143-69F]
Consists of the following components:
17-inch LCD
1280x1024 max. Full color
Keyboard (no ten-key numeric keypad)
Optical Mouse
Server Switch Unit
- Supports up to eight servers.
- Allows the connection of up to 64 servers by cascading the Server
Switch Units [N8191-10F].
Switch Unit Connection Cable Set (1.8m)
[K410-119(1A)]
Server Switch Unit
- Server Switch Unit (8 ports) [N8191-10F]
•The 17-inch LCD Console Unit [N8143-69F] allows the connection of up to 64
servers by cascading eight Server Switch Units [N8191-10F].
•The 17-inch LCD Console Unit [N8143-69F] does not support other SSUs [N8191-
09F/-09AF].
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
LAN
CPU/IO module#0
Onboard
2x Standard LAN ports per CPU/IO module.
1000BASE-T
LAN port #1
LAN port #2
1000BASE-T
Be sure to connect four physical LAN interfaces to the network HUB.
Each of two pairs of 1000BASE-T on the CPU/IO module is redundant configuration.
1000BASE-T
LAN port #1
Network
LAN port #2
1000BASE-T
CPU/IO module#1
Onboard
Optional LAN cards
• on the same PCI slot# of each CPU/IO module
CPU/IO module#0
PCI-Ex slot
CPU/IO module#1
PCI-Ex slot
Network
A set of two cards
N8804-009
2-channel 1000BASE-T controller set
[Note for optional LAN cards]
N8804-007 is not supported on R320b-M4/R320a-E4 Windows Server 2008 R2 model.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Storage D3-10/D4-30/D8-10/D8-20/D8-30/E1-10
- Be sure to procure the control software according to the sales region.
Note!
Direct connection
CPU/IO module#0
PCI-Ex slot
NEC Storage:
-D3-10/D4-30/D8-10/
D8-20/D8-30/E1-10
CPU/IO module#1
PCI-Ex slot
Fibre Channel board set
(8Gbps)
Fibre Channel cable set
5m [NF9320-SJ01]
10m[NF9320-SJ02]
20m[NF9320-SJ03]
50m[NF9320-SJ04]
[N8803-038]
A set of two cards
[Notes for FC controller]
On R320a-E4, it operates at 4Gbps bandwidth due to system bus performance.
N8803-035 Fibre Channel board set (4Gbps) is not supported.
Connection via Fiber Channel switch:
To be supported in November.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Tape backup
SCSl controller
[N8803-036]
CPU/IO module#0
Device Expansion Unit
[N8141-41F]
PCI-Ex slot
Power Unit
[N8181-54F]
SCSI cable
1m [K410-94(01)]
2m [K410-94(02)]
N8151-51A
Built-in DAT(DAT72)(36GB)
Built-in LTO(200GB)
N8151-59
N8151-76
Built-in LTO(400GB)
Double backup configuration
Device Expansion Unit
[N8141-41F]
[Notes for double backup]
(1)Backup job
There are the following notes for double backup
configuration.
Configure 2 sets of SCSI controller/SCSI cable/Backup
device. Two backup devices are recognized separately by
OS.
SCSI cable
When automatically backup by a job, make a job for each
backup device so that each device can backup. In case one
device fails, the other backup device can backup.
[K410-94(01)]
[K410-94(02)]
(2) Note for BrightStor ARCserve backup
When making a job, backup is not performed if you put [*]
in the [group] of destination tab.
CPU/IO
module #0
CPU/IO
Module #1
SCSI
controller
FT server
Single backup configuration
Device Expansion Unit
［N8141-41F］
[Notes for single backup]
Configure 1 set of SCSI controller/SCSI cable/Backup
device. In case a CPU/IO module or backup device fails,
backup is not possible until the failed part is repaired or
replaced.
When two servers share a Device Expansion
Unit [N8141-41F]
SCSI cable
[K410-94(01)]
[K410-94(02)]
CPU/IO
Module #0
CPU/IO
Module #1
R320a-E4,R320b-M4
R320a-E4,R320b-M4
SCSI
controller
FT server
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
SAS controller
[N8803-037]
CPU/IO module#0
Device Expansion Unit
[N8141-41]
PCI-Ex slot
Power Unit
[N8181-54F]
Internal SAS cable
[K410-163(00)]
SAS cable
2m [K410-168(02)]
N8151-101
N8151-102
N8151-90
N8151-77
Built-in LTO(LTO2)
Built-in LTO(LTO3)
Built-in LTO(800GB)
Built-in LTO(800GB)
Double backup configuration
Device Expansion Unit
[N8141-41F]
[Notes for double backup]
(1) Backup job
There are the following notes for double backup
configuration.
Configure 2 sets of SAS controller/SAS cable/Backup
device. Two backup devices are recognized separately by
OS.
When automatically backup by a job, make a job for each
backup device so that each device can backup. In case one
device fails, the other backup device can backup.
SAS cable
K410-168(02)
(2) Note for BrightStor ARCserve backup
When making a job, backup is not performed if you put [*]
in the [group] of destination tab.
CPU/IO
module #0
CPU/IO
module #1
SAS
controller
FT server
Single backup configuration
Device Expansion Unit
[N8141-41F]
[Notes for single backup]
Configure 1 set of SAS controller/SAS cable/Backup
device. In case a CPU/IO module or backup device fails,
backup is not possible until the failed part is repaired or
replaced.
When two servers share a Device Expansion
Unit [N8141-41F]
SAS cable
K410-168(02)
CPU/IO
module #0
CPU/IO
module #1
R320a-E4,R320b-M4
R320a-E4,R320b-M4
SAS
controller
FT server
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Supported software for tape backup
The following table shows the support matrix of backup software and backup devices.
ARCserve
Backup Exec
Product
code
Type
W2K8
W2K8
O*b1
X
OS
DAT
LTO
N8151-51A Built-in DAT
DAT72
SCSI
O
O
N8151-59
N8151-76
Built-in LTO（Half-Hight） Ultrium-2 SCSI
Built-in LTO（Half-Hight） Ultrium-3 SCSI
O
O*b1
O*b2
O*b2
O*b3
O
N8151-101 Built-in LTO(Half-Higiht） Ultrium-2 SAS
N8151-102 Built-in LTO(Half-Higiht） Ultrium-3 SAS
O*a1
O
N8151-90
N8151-77
Built-in LTO(Half-Higiht） Ultrium-4 SAS
Built-in LTO（Full-Hight） Ultrium-4 SAS
O
O
O: supported X: not supported
Notes
＜ARCServe＞
*a1: Do not disable the tape driver on the device manager.
Backup Exec
＜
＞
*b1: Do not install the Symantec driver. Apply the OS standard driver.
*b2: Do not install the Symantec driver. Apply the driver which comes with the tape device.
*b3: Use the latest driver which can be downloaded from the Symantec website.
- Disaster Recovery Option“ is not supported on the ft server system.
- Regarding NetBackup, client function only supported.
Notes for using the backup software
- When using BrightStor ARCserve for restore, please use the same tape drive product used at the
backup. A data exchange between different tape drives is not supported. Even if the same specification
tape is used, there may be an error or some problems since the BrightStor ARCserve controls differently
depending on the type of tape device.
ServicePack and update modules for BrightStor ARCserve can be downloaded from the CA
"Disaster Recovery Option" is not supported on the FT server system.
- Update modules/drivers for Backup Exec can be downloaded from the Symantec website
applying update module or driver installation. Refer to the User‘s Guide for the procedure.
“Intelligent Disaster Recovery option” is not supported on the FT server system.
- It is not supported to backup from NEC Express5800/ft series to a backup device directly using
NetBackup. However, NEC Express5800/ft series can be a backup-client machine of
NetBackup.
"Disaster Recovery Option" is not supported on the ft server system.
- When using Windows Server 2008 Hyper-V on FT server, prepare a separate server for backup.
For backup patterns, refer to each backup software company's web site.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Supported PCI cards and installable slots
R320a-E4
O: Supported
Notes
CPU/IO module
Low-Profile
Product
code
Slot#1
Slot #2
For previous
R320a only
1000BASE-T 2ch board kit
1000BASE-T 2ch board kit
SCSI board
N8804-007
N8804-009
N8803-036
N8803-037
N8803-035
-
-
*1
*2
*2
O
O
O
-
O
O
O
-
SAS board
FibreChannel controller
(4Gbps)
For previous
R320a only
FibreChannel controller
(8Gbps)
N8803-038
*1
O
O
*1: Be sure to install a pair of controller on the same slot# of both of CPU/IO modules.
*2: N8803-036/037 can not be installed at the same time. Limited up to one board/module.
R320b-M4
O: Supported
CPU/IO module
Low-Profile Full-Height
Slot#1 Slot #2 Slot #3 Slot #4
Product
code
Notes
For previous
R320a only
1000BASE-T 2ch board kit
1000BASE-T 2ch board kit
SCSI board
N8804-007
N8804-009
N8803-036
N8803-037
N8803-035
-
-
-
-
*1
*2
*2
O
O
O
O
O
O
O
O
O
O
O
O
SAS board
FibreChannel controller
(4Gbps)
For previous
R320a only
-
-
-
-
-
-
FibreChannel controller
(8Gbps)
N8803-038
*1
O
O
*1: Be sure to install a pair of controller on the same slot# of both of CPU/IO modules.
*2: N8803-036/037 can not be installed at the same time. Limited up to one board/module.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
UPS
[Note]
- Be sure to manage the UPS via network with Network shutdown software. The UPS can
not be managed via serial port and USB port with Power Chute Plus software.
Example configuration (UPS Non-Redundant ):
Device Expansion Unit
[N8141-41F]
NEC Express5800/R320a-E4,
R320b-M4 [N8800-155F/154F]
Control
APC UPS (3000VA)
Network management Card
(3,000VA/2,700W)
Note)
The UPS can not be managed via serial
port and USB port with Power Chute Plus
software.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Example configuration (UPS Redundant ):
Device Expansion Unit
[N8141-41F]
NEC Express5800/R320a-E4,
R320b-M4 [N8800-155F/154F]
700VA/695W
700VA/695W
Control
APC UPS (1500VA)
Network management Card
APC UPS (750VA)
Note)
The UPS can not be managed via serial
port and USB port with Power Chute Plus
software.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Tower conversion kit
N8843-003
Tower conversion kit
23 inch height pedestal rack with Front bezel for R320a/R320b
327(W)x 804(D)x 592(H)mm, 27kg (including stabilizer)
Operating System
- Microsoft Windows Server® 2008 R2 Enterprise (1-2 Processor, 25CAL Version)
UL0999-436EN
UL0999-436CT
UL0999-436CS
UL0999-436KR
English
Chinese Traditional
Chinese Simplified
Korean
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Notes for using Hyper-V
System halt Time when Duplexing CPU Module
In the synchronization process of CPU modules, a memory copy is performed
to duplex memory on both CPU modules. Some part of memory area can be
copied without stopping the system while the other part requires the system to
stop. When using Hyper-V, the system cannot use the function to copy without
stopping the system. Therefore, the system does not respond for a longer
period of time during the synchronization process of CPU modules as
compared to when Hyper-V is not used. The following are the reference
values of each model.
Note:
1)Memory copy time depends on the memory size installed in the system.
2) When a large amount of memory is installed, non-responding time will be
longer and the connection from a client may time out. Adjust the timeout
values of TCP/IP, etc., on the client side as necessary.
Model / Memory size
R320a-E4
4GB
12GB
29 sec 57 sec 113 sec
8 sec 15 sec 29 sec
24GB
48GB
96GB
-
9 sec
4 sec
R320b-M4
57 sec
* Actual time may differ depending on the status of use.
About Guest OS
1. Guest Operating Systems supported on NEC Express5800/ft series are the
same as other general purpose servers.
2. Windows Server 2008 R2 Enterprise licence includes the use right to run up
to four additional virtual instances of Windows Server
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
Notes for using Hyper-V
Backup
When using Hyper-V on FT server, prepare a separate server for backup. For
backup patterns, refer to each backup software company's web site.
NEC ESMPRO Agent
For monitoring guest OS, NEC ESMPRO Agent for Guest OS is required.
Active Upgrade
A team assigned to the virtual network by Hyper-V Virtual Network Manager
cannot be used in Active Upgrade. To use Active Upgrade, at least two teams
are required.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
|