Multibutton Telephone
Feature Handbook
92600MFH05
April 2001
Printed in U.S.A. (1964)
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Multibutton Telephone
Alphanumeric
Display
Ringer/Splash Tone
302
STA 302
Volume Control
(Not available
Soft Keys
(Not available on
all models)
on all models)
1
6
2
7
3
8
4
9
5
CLEAR
CHECK
One Touch
Keys
10
1
2
3
4
5
6
7
8
9
10
16
22
11
17
23
12
18
24
Programmable
Function Keys
13
19
14
20
15
21
MW
Abbreviated
Dialing
1
4
7
2
3
DIAL
CALL 1
5
8
6
9
Dual Line
Appearance Keys
LND
MIC
CALL 2
DND
FLASH
CONF
Last Number
Redial
0
VOL
SPK
HOLD
Do Not Disturb
Microphone Cutoff
Speakerphone
Microphone
Message
Waiting Lamp
Handsfree,
Handset,
Page and BGM
Volume Control
Nothing contained in this manual shall be deemed to be, and this manual does not consti-
tute, a warranty of, or representation with respect to, any of the equipment covered. This
manual is subject to change without notice and NEC America, Inc. has no obligation to pro-
vide any updates or corrections to this manual. Further, NEC America also reserves the
right, without prior notice, to make changes in equipment design or components as it
deems appropriate. No representation is made that this manual is complete or accurate in
all respects and NEC America shall not be liable for any errors or omissions. In no event
shall NEC America be liable for any incidental or consequential damages in connection with
the use of this manual. This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be photocopied or repro-
duced without prior written consent of NEC America.
©2001 by NEC America, Inc. All Rights Reserved. Printed in U.S.A.
Year 2000 Compliance
The 28i/124i/384i systems are unaffected by the date change to the year 2000. The sys-
tems process the Leap Year correctly and do not require any additional upgrades or repro-
gramming. All versions of the 28i use a four-digit date code entry. The 124i with software
4.04 EXCPRU or Base 4.04 or higher uses a four-digit date code entry (e.g., 2000)
Previous software versions use a two-digit date code entry (e.g. 00=2000). The 384i
presently uses a four-digit year entry after software level 3.07.24.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Using Your Telephone .....................................................1
Handsfree Options . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Using All Those Features! ...............................................2
Calling a Co-Worker . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Outside Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Handling And Rerouting Your Calls . . . . . . . . . . . . . . .3
When Your Call Can't Go Through . . . . . . . . . . . . . . . .3
Placing Calls Quickly . . . . . . . . . . . . . . . . . . . . . . . . . .4
When You Work In Groups . . . . . . . . . . . . . . . . . . . . . .5
If You Need Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Have a Telephone Meeting . . . . . . . . . . . . . . . . . . . . . .6
Streamlining Your Telephone's Operation . . . . . . . . . . .6
Personalizing Your Telephone . . . . . . . . . . . . . . . . . . . .7
Your Phone Does the Talking . . . . . . . . . . . . . . . . . . . .8
And, Your Super Display Does The Thinking . . . . . . . .9
Features ........................................................................11
Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . .11
Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Automated Attendant (VAU) . . . . . . . . . . . . . . . . . . . .16
Background Music . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Barge In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Call Forwarding Off-Premise . . . . . . . . . . . . . . . . . . .21
Call Forward Follow Me . . . . . . . . . . . . . . . . . . . . . . .22
Call Forward/DND Override . . . . . . . . . . . . . . . . . . . .23
Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Call Waiting/Camp On . . . . . . . . . . . . . . . . . . . . . . . .25
Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Conference, Voice Call . . . . . . . . . . . . . . . . . . . . . . . .34
Department Calling . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Department Step Calling . . . . . . . . . . . . . . . . . . . . . . .37
Dial Number Preview . . . . . . . . . . . . . . . . . . . . . . . . .38
Dial Pad Confirmation Tone . . . . . . . . . . . . . . . . . . . .39
Directed Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . .40
Directory Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Door Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
DSS Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Forced Trunk Disconnect . . . . . . . . . . . . . . . . . . . . . .50
General Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Group Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Group Listen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Handsfree and Monitor . . . . . . . . . . . . . . . . . . . . . . . .54
Headset Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
System Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Exclusive Hold . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Group Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Intercom Hold . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Hotline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Intercom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Intercom Abandoned Call Display . . . . . . . . . . . .60
Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . .61
Line Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Meet Me Conference . . . . . . . . . . . . . . . . . . . . . . . . . .63
Meet Me External Conference . . . . . . . . . . . . . . .63
Meet Me Internal Conference . . . . . . . . . . . . . . . .64
Meet Me Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Meet Me External Paging . . . . . . . . . . . . . . . . . . .65
Meet Me Internal Paging . . . . . . . . . . . . . . . . . . .66
Memo Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Message Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Microphone Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Multiple Directory Numbers/Call Coverage . . . . . . . .71
Multiple Directory Numbers . . . . . . . . . . . . . . . .71
Call Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Name Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Night Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Off Hook Signaling . . . . . . . . . . . . . . . . . . . . . . . . . . .76
One-Touch Calling . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Using Personal Speed Dial without One-Touch
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
One-Touch Serial Operation . . . . . . . . . . . . . . . . . . . .82
Outside Calls, Answering . . . . . . . . . . . . . . . . . . . . . .84
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Outside Calls, Placing . . . . . . . . . . . . . . . . . . . . . . . . .86
Converting from Pulse to Tone Dialing . . . . . . . .87
Are You Behind a PBX? . . . . . . . . . . . . . . . . . . .87
You May Have a Private Line . . . . . . . . . . . . . . .88
If You Hear a Warning Tone . . . . . . . . . . . . . . . . .88
How Prime Line Works . . . . . . . . . . . . . . . . . . . .88
Did Your Call Go Through? . . . . . . . . . . . . . . . . .89
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Internal Paging . . . . . . . . . . . . . . . . . . . . . . . . . . .90
External Paging . . . . . . . . . . . . . . . . . . . . . . . . . .90
Combined Paging . . . . . . . . . . . . . . . . . . . . . . . . .91
Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Park and Page (VAU) . . . . . . . . . . . . . . . . . . . . . . . . .94
Personal Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Programmable Function Keys . . . . . . . . . . . . . . . . . . .98
Repeat Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Reverse Voice Over . . . . . . . . . . . . . . . . . . . . . . . . . .104
When You're On a Call . . . . . . . . . . . . . . . . . . . .104
When Your Phone is Idle . . . . . . . . . . . . . . . . . .104
Ringdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Room Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Save Number Dialed . . . . . . . . . . . . . . . . . . . . . . . . .107
Secretary Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Secretary Call Buzzer . . . . . . . . . . . . . . . . . . . . .109
Secretary Call Pickup . . . . . . . . . . . . . . . . . . . . .110
Selectable Display Messages . . . . . . . . . . . . . . . . . . .111
Selectable Ring Tones . . . . . . . . . . . . . . . . . . . . . . . .113
Serial Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Tandem Trunking . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Method A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Method B (Requires a
[Transfer] key) . . .116
Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Transferring Outside Calls . . . . . . . . . . . . . . . . .119
Transferring Without Holding . . . . . . . . . . . . . . .119
Transferring Intercom Calls . . . . . . . . . . . . . . . .120
Meet Me External Paging Transfer . . . . . . . . . . .121
Meet Me Internal Paging Transfer . . . . . . . . . . .122
Trunk Queuing and Camp On . . . . . . . . . . . . . . . . . .123
Voice Announce Unit (VAU) . . . . . . . . . . . . . . . . . . .124
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Calling Your Mailbox . . . . . . . . . . . . . . . . . . . . .126
Leaving a Message . . . . . . . . . . . . . . . . . . . . . . .126
Forwarding Calls to Your Mailbox . . . . . . . . . . .126
Emulating a Personal Answering Machine . . . . .127
Transferring Calls to a Mailbox . . . . . . . . . . . . .128
Recording Your Call . . . . . . . . . . . . . . . . . . . . . .128
Voice Over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
Voice Prompting Messages . . . . . . . . . . . . . . . . . . . .130
Volume Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Charts and Illustrations ...............................................133
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Telephone
Your telephone's Alphanumeric Display helps you use features and
tells you about your calls. For example, a ringing outside line may dis-
play a name before you answer it. (You may be able to change the time
and date on your phone if it's not correct. Turn to page 117 for more.)
Press a One-Touch Key for one-button contact with co-workers and
outside callers, or when using certain features. To learn how to pro-
gram your One-Touch Keys, go to page 78.
Function Keys are normally line keys, but you can program them for
other features. In this handbook, the feature assigned to a function key
appears in parentheses next to the key. For example,
(Hotline)
means press the function key set for Hotline. See page 98 for more.
Line Appearance Keys are Intercom keys for placing and answer-
ing calls. If you're busy on one - just use the other.
Press
for Handsfree calls, or use the handset instead. See
Handsfree Options below. The Microphone picks up your voice for
Handsfree calls, while Feature Keys speed up using common features.
Handsfree Options
G Handsfree lets you place and answer calls by pressing
instead of using the handset. Your telephone must have a
Speakerphone if you want to use Handsfree.
G With Automatic Handsfree, press a line or Line Appearance key
without lifting the handset. You normally have this feature.
G If you have Monitor, you can place a call without lifting the hand-
set but you must lift the handset to speak. Telephones without
Speakerphones have Monitor.
Due to the flexibility built into the system, your dialing codes may differ
from those in this guide. Review Your System's Dialing Plan on page 133
and check with your Communications Manager.
Also, the system may restrict you from using some of the features in this
handbook.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
Calling a Co-Worker
You can dial a co-worker on the
Intercom (page 59), or use
Paging (page 90) if you don't
know where they are.
When you must get through right
away, interrupt a call using Barge
In (page 18).
Certain Intercom calls may ring
your phone on function keys as
Multiple Directory Numbers
(page 71).
Visitors at your entrance door can call you on the Intercom using a
Door Box (page 44).
Outside Calls
You can Answer Outside Calls
that ring your phone or flash your
line keys (page 84). Caller ID
allows you to identify the caller
before or after you pick up the
handset (page 27). Night Service
(page 74) may change the way
these same calls ring your phone.
Set your Line Preference (page
62) to answer ringing outside calls
or Intercom calls first.
To Place Outside Calls (page 86), use your line keys or dial codes.
You may have to enter Account Codes (page 14) before your call
goes through. Use Dial Number Preview (page 38) to check your
digits before you dial. Once your call goes through, the Call Timer
(page 24) shows you how long you're on the phone. You may be able
to use Flash (page 46) to place another call without losing your line.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
Handling And Rerouting Your Calls
Use Hold (page 56) to have your
call wait at your phone. Or, Park it
in orbit for a co-worker (page 92).
FOLLOW
ME
CALL
FWD
HOLD
PARK
DND
Have a call for a co-worker?
SEL.
DISPL.
Transfer it to them (page 118).
Don't know where they are? Use
Meet Me Paging Transfer (page
121) so they can pick it up wherev-
er they are. If you want the call to
come back when your co-worker is
done, use Serial Call (page 114).
When you leave your desk, think about Call Forwarding your calls to
someone else (page 19). If that meeting runs long, go to another phone
and bring your calls to you with Call Forward Follow Me (page 22).
When you want callers to know where you are, set a Selectable
Display Message at your phone (page 111). You may be able to
Override (page 23) another user's Call Forward if you think they are
still at their phone.
When Your Call Can't Go Through
Don't just hang up when your call
can't get through to a co-worker!
Use Call Waiting (page 25) to wait
without hanging up. Send your co-
worker Off Hook Signaling (page
76) to let them know you're wait-
ing. If you don't have time to wait,
leave a Callback request (page 26).
In a hurry? Think about leaving
your co-worker a Message
Waiting (page 68), or use optional
Voice Mail (page 125) to record a
voice message for them.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
There's no need to keep redialing your outside call if it's busy or unan-
swered - use Repeat Redial instead (page 103). And when your sys-
tem's lines are busy, Trunk Queuing (page 123) lets you wait for a
free one. If you have an emergency, Forced Trunk Disconnect (page
50) allows you to get through on a busy line right away.
With Voice Over (page 129), talk to a busy user - while they keep
talking to their initial caller. When you're busy on a call, you can do
the same thing with Reverse Voice Over (page 104).
Placing Calls Quickly
Store numbers that you call often
in Abbreviated Dialing bins (page
11). You can easily dial the stored
number with just a few key press-
es. To quickly retry the number
you just dialed, try Last Number
Redial (page 61). If you'll need to
redial the number later on, let
Save Number Dialed (page 107)
retain it for you. Ever call
Directory Assistance for a number
and not have a pen to write it
down? Use Memo Dial (page 67)
to jot the number down in your phone's memory instead.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
When You Work In Groups
If you and your co-workers handle
each other's calls, you might want to
be in a Department Calling group
(page 35). Someone calling your
group's number goes through to any-
one who's available. You can even
have Department Step Calling
(page 37) send your personal calls to
your group when you're not avail-
able. To answer a call already ring-
ing a co-worker's phone, use Group
Call Pickup (page 52).
When you're on a call and you want the others in your area to listen in
on the conversation, activate Group Listen (page 53). Your co-work-
ers hear the call through your telephone's speaker.
If you frequently call the same co-worker, you can have Ringdown
(page 105) automatically call them for you. All you have to do is lift
your handset.
If You Need Privacy
When you're busy in your office
and don't want to be interrupted,
use Do Not Disturb (page 43).
Before talking to someone at your
desk while you're on the phone, try
Microphone Cutoff (page 70).
Your caller cannot hear your voice
until you cancel Microphone
Cutoff.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
Have a Telephone Meeting
Conference (page 33) allows you to
quickly set up a telephone meeting.
When your phone allows Voice
Call Conference (page 34), others
can join your outside call just by
pressing the line key.
Use Meet Me Conference (page
63) to set up a meeting which lets
others join if they choose.
Optionally, you can use Meet Me
Paging (page 65) to set up a meet-
ing on a page zone.
To join two outside callers together and leave them to talk privately,
use Tandem Trunking (page 115).
Streamlining Your Telephone's Operation
Your telephone provides you with
options that can dramatically
streamline the way you handle
calls. For example, you can pro-
gram One-Touch Keys (page 78)
for one-button access to co-work-
ers, outside calls, Abbreviated
Dialing bins and certain feature
codes. Or record any dialing steps
in a one-touch "macro" key with
One-Touch Serial Operation
(page 82).
Want to automate Callback, Message Waiting or other features? Just
assign these functions to available Programmable Function Keys
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
(page 98). Need one-button Transfer and calling for a co-worker?
Program a Hotline (page 58) on another function key. (When you see
in this handbook, the operation needs a Programmable
Function Key.)
Are you a secretary - or do you have a secretary that handles your
calls? Set up Secretary Call buzzer keys (page 109). You can use
Secretary Call Pickup (page 110) to quickly pick up calls intended
for your secretary or boss.
Tired of always reaching for the handset or cradling it under your chin
while you type? Install a headset and enable Headset Operation
(page 55).
Personalizing Your Telephone
If your phone is near other phones
that ring the same way, choose
unique Selectable Ring Tones
(page 113) so you know which
calls are for you.
When you need to cover up noise
in your office that might be dis-
tracting to your work, turn on
Background Music (page 17).
Don't forget about that important
meeting - set an Alarm (page 15)
to remind you.
Let the co-workers you call know who's on the line. Go to Name
Storing (page 72) and assign a name to your extension.
To have your phone beep every time you press a dial pad key, enable
the Dial Pad Confirmation Tones (page 39).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
Your Phone Does the Talking
The optional Voice Announce
Unit (page 124) gives your system
digital recording and play back
capability. This lets you handle
callers with that important
"Personal Touch". For example, if
you don't have an operator, the
Automated Attendant (page 16)
can answer your calls and play a
list of dialing options to your
callers. Use Personal Greeting
(page 96) to greet your callers with
your own recorded voice, and then
forward them to a co-worker. Or, you can have Park and Page (page
94) welcome your callers and automatically page you to pick up the
call.
You'll find other Voice Announce Unit features handy when using
your phone or staying in touch with others in your company. If there is
an announcement everyone in your company should hear, just listen to
your General Message (page 51). Voice Prompting Messages (page
130) tell you about your system, your own phone and the status of
your call. You'll hear voice prompts reminding you when your calls
are forwarded or when you have a message. You can even find out
your extension number, the date and the time of day.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
And, Your Super Display Does The Thinking
Do you want a feature but not
know how to use it? Have you
ever been busy on a call and not
remembered the options your
phone provides? If you have an
optional Super Display Telephone,
the Soft Keys on your telephone
do the thinking for you.
?
When you use your Super Display,
your One-Touch Keys automatical-
ly turn into Soft Keys. A Soft Key
is a variable feature key - the
function of the key changes to match what you are doing. This lets you
spend more time thinking about your job and less time thinking about
your telephone.
The example on the next page shows how this works. In this example,
you are busy on an outside line talking to a customer. You realize that
you want to call this customer again, but can't remember the name of
the feature that lets you save the number.
1. MENU (Press the MENU Soft Key).
This is the top screen in the illustra-
tion on the next page.
Here's what you do:
2. SAVE DIAL (Press the SAVED DIAL
Soft Key).
This is the second screen in the illus-
tration on the next page.
The system saves the number you just
dialed and returns your Soft Keys to
One-Touch Keys. This is the last screen
in the illustration on the next page.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using All Those Features!
To find out more on using your Soft Keys, use the plastic laminated
Reference Card that came with your phone.
92700 - 07
CHECK
CHECK
CHECK
CLEAR
CLEAR
CLEAR
TRUNK 01
9265400
[DIRECTORY]
TRUNK 01
[MENU]
9265400
CONFERENCE
REPEAT DIAL
SAVED DIAL
ABB: COMMON
ABB: GROUP
[
]
TRUNK 01
NUMBER SAVED
[DIRECTORY]
[MENU]
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviated Dialing
Abbreviated Dialing gives you quick access to numbers you call fre-
quently. This saves time, for example, when calling a client with
whom you deal often. Instead of dialing a long telephone number, you
just use Abbreviated Dialing.
There are three types of Abbreviated Dialing: Common, Group and
Personal. All co-workers within your Tenant Group can share the
Common Abbreviated Dialing numbers. All co-workers in your
Department Calling Group can share the Group Abbreviated Dialing
numbers. (See page 35 for more on Department Calling.) Only you
can use your Personal Abbreviated Dialing numbers. To set up
Personal Abbreviated Dialing, turn to One-Touch Calling on page 78.
1.
+
(for Common).
To store an
Abbreviated Dialing
number
OR
(recommended for
display phones only):
(for Group).
2. Dial Abbreviated Dialing bin number
(000-499 or 0000-1999).
Ask your Communications Manager
for your bin numbers.
3. Dial telephone number you want to store
(up to 24 digits).
Valid entries are 0-9, # and *. To
enter a pause, press MIC.
4.
5.
+ Enter the name associated with
the Abbreviated Dialing number.
Refer to Name Storing on page 72 for
instructions on entering names.
+
to hang up.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviated Dialing
1.
+
.
To dial a Common
Abbreviated Dialing
number:
2. Dial bin number.
The stored number dials out. The sys-
tem selects a line for you.
OR
1.
+
or
Abbreviated Dialing).
To preselect, press a line key instead
of CALL1.
(Common
2. Dial Common Abbreviated Dialing bin
number.
The stored number dials out. Unless
you preselect, the system selects a line
for you.
1.
+
.
To dial a Group
Abbreviated Dialing
number:
2. Dial bin number.
The stored number dials out. The sys-
tem selects a line for you.
OR
1.
+
(Group Abbreviated
Dialing).
To preselect, press a line key instead
of CALL1.
2. Dial Group Abbreviated Dialing bin
number.
The stored number dials out. Unless
you preselect, the system selects a line
for you.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Abbreviated Dialing
1.
2.
To check your stored
Abbreviated Dialing
numbers:
(Common only).
3. Dial the Abbreviated Dialing code (e.g.,
001).
If the entire stored number is too
long for your phone's display, press
* to see the rest of it.
To check more Abbreviated Dialing
numbers, repeat from step 2.
4.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Account Codes
Account Codes are codes you enter that help keep track of outside
calls. There are two types of Account Codes: Optional and Forced.
With optional codes, the Account Codes you enter are solely for cate-
gorizing your calls. For example, if you work in an accounting firm
that must bill back customers for time on the phone, Optional Account
Codes are for you. Forced Account Codes also let you categorize calls,
but you must enter one before placing outgoing calls. If you don't
enter the code, you can't place the call. This ensures that calls don't go
out untracked.
Check with your Communications Manager to find out if your system
uses Account Codes - and which codes you should enter. Account
Codes can be from 1-16 digits long, using 0-9 and #.
1.
+ Account Code (1-16 digits) +
To enter an Account
Code any time while
on an outside call:
.
1. Access trunk for outside call.
You can access a trunk by pressing a
line key or by dialing a code. Refer to
page 86 for more on placing outside
calls.
To enter an Account
Code while placing an
outside call:
2.
+ Account Code (1-16 digits) +
.
3. Dial the number you want to call.
If you hear "stutter" dial tone after
dialing the number, your system
requires an ARS Authorization Code.
Ask your Communications Manager for
your codes.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm
You can use your extension like an alarm clock to remind you of
appointments and important meetings. Your phone has two types of
alarms:
G
Alarm 1 - which sounds only once at the preset time.
Alarm 2 - which sounds every day at the preset time.
G
1.
+
+ Alarm type (1
To set the alarm:
or 2).
2. Dial the alarm time (24-hour clock).
For example, for 1:15 PM dial 1315.
3.
to hang up.
1.
1.
To silence an alarm:
+
+ Alarm type 1
To check the pro-
grammed alarm time:
or 2 +
.
1.
2.
+
+ Alarm type 1
to hang
To cancel an alarm:
or 2.
up.
+
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Automated Attendant (VAU)
This feature requires a Voice Announce Unit (VAU).
G
Automated Attendant automatically answers your system's outside
calls, plays a prerecorded greeting and then lets callers directly dial
you or your co-workers. This gives your system immediate answering
and routing of calls without an operator or dispatcher. The Automated
Attendant can:
G
Simultaneously answer up to six calls.
Route calls to an extension, Department Group or Voice Mail and
G
provide additional options if the extension or group is unavailable.
Give you the option of recording or modifying the Automated
G
Attendant greetings (see below).
1.
+
.
To record, listen to or
erase an Automated
Attendant greeting:
2. To record, dial
.
OR
To listen, dial
.
OR
To erase, dial
.
3. Dial the VAU message number (01-16)
for the Automated Attendant greeting
you want to record, listen to or erase.
Your Communications Manager can
tell you which message to enter.
If recording, begin when you hear the
announcement, "Please start record-
ing." When done, press # to check what
you recorded.
When listening to a message, press #
to hear the message again.
If erasing, you can cancel erasing by
pressing HOLD before hanging up.
4.
to hang up.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Background Music
Background Music (BGM) sends music from an FM receiver, tape
deck or CD player your company provides to the speaker in your tele-
phone. This helps give you a pleasant working environment. The
Background Music plays whenever your phone is idle.
1.
2.
+
.
To Turn BGM on or
off:
to hang up.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Barge In
Barge In permits you to break into a co-worker's established call. Use
Barge In when you have to get a message through right away (such as
in an emergency). Barge In sets up a three-way call between you, your
co-worker and their caller.
Your system provides two Barge In modes: Monitor Mode and Speech
Mode. With Monitor Mode, you can listen in on another user's conver-
sation but you cannot participate. With Speech Mode, you can listen
and join into the conversation. Check with your Communications
Manager to see which type of Barge In you have.
CAUTION
Unauthorized intrusion on calls using the Barge In feature
may be interpreted as an invasion of privacy.
1. Call busy extension.
To Barge In on a con-
versation in progress:
2.
(Barge In).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forwarding
Use Call Forwarding to redirect your calls to another extension. With
Call Forwarding, you're sure your calls are covered when you are
away from your work area. There are four types of Call Forwarding:
G
Call Forwarding when Busy or Not Answered
Calls forward when your extension is busy or not answered.
Call Forwarding Immediate
G
All calls forward immediately to the destination, and only the des-
tination rings.
Call Forwarding when Not Answered
G
Calls forward when your extension is not answered.
Call Forwarding Immediate with Both Ringing
G
All calls forward immediately to the destination, and both the des-
tination and your extension ring (not for Voice Mail).
Personal Answering Machine Emulation
G
Have your phone emulate an answering machine. Turn to page 125
for more on Voice Mail.
Call Forwarding will reroute calls ringing your extension, including
calls transferred from another extension. You must enable Call
Forwarding from your phone. To redirect your calls if you are at
another phone, use Call Forward Follow Me on page 22.
1.
+
OR
.
To activate or cancel
Call Forwarding:
(Call Forward to Station).
2. Dial Call Forwarding condition:
1 = Personal Answering Machine
Emulation (then skip to step 4)
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate with simultaneous ring-
ing (not for Voice Mail)
0 = Cancel
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forwarding
3. Dial destination extension, Voice Mail
To activate or cancel
Call Forwarding
(Cont’d):
master number or press Voice Mail key.
You cannot forward to a Department
Group pilot number. Once you forward,
only the destination user can place an
Intercom call to you.
4. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
5.
to hang up (if you dialed
in step 1).
Your DND or Call Forwarding
(Station) Programmable Function Key
flashes when Call Forwarding is
activated.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forwarding Off-Premise
Use Off-Premise Call Forwarding to forward your calls to an off-site
location. Stay in touch when you're away from the office by forward-
ing to your cellular phone, home office, hotel or meeting room.
1.
1.
2.
+
OR
.
To activate Call
Forwarding Off-
Premise:
(Call Forward to Device).
+ Dial line access code.
Line access codes are 9 (ARS/Trunk
Group Routing), 804 + Line Group (1-
9, 01-99 or 001-128) or #9 + Line num-
ber (e.g., 05 or 005 for line 5).
3. Dial the outside number to which your
calls should be forwarded.
4.
5.
.
to hang up (if you dialed *4
in step 1).
Your DND or Call Forwarding
(Device) Programmable Function Key
flashes.
1.
1.
2.
3.
+
OR
.
To cancel Call
Forwarding Off-
Premise
(Call Forward to Device).
.
+
to hang up (if you dialed *4
in step 1).
Your DND or Call Forwarding
(Device) Programmable Function Key
stops flashing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forward Follow Me
While you are at a co-worker's desk, you can direct your calls to your
co-worker's extension. Use Call Forward Follow Me if you get detained
with your co-worker longer than expected. Instead of ringing your own
phone unanswered, your calls will ring you where you are. (To reroute
calls from your own extension, use Call Forwarding on page 19.)
1.
1.
2.
+
OR
.
To activate Call
Forward Follow Me:
(Call Forward to Station).
+ Dial your own extension number
(i.e., the source).
3. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
4.
to hang up (if you dialed
in step 1).
Your Call Forwarding (Station)
Programmable Function Key flashes
when Call Forwarding is activated.
1.
1.
2.
3.
+
.
To cancel Call Forward
Follow Me:
OR
(Call Forward to Station).
.
to hang up (if you dialed
in step 1).
Your Call Forwarding (Station)
Programmable Function Key goes out.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forward/DND Override
If you call an extension that is Call Forwarded or in Do Not Disturb,
use Call Forwarding/DND Override to talk to the extension user any-
way. This is helpful, for example, if you have an important message or
emergency and you must get through.
1. Call the forwarded or DND extension.
To override an
extension:
2.
(Override).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Timer
You can time your outside calls on your telephone display. You'll find
Call Timer indispensable if you must keep track of your time on the
phone. For incoming calls, the Call Timer begins as soon as you
answer the call. For outgoing calls, the Call Timer starts about 10 sec-
onds after you dial the last digit.
1. Place or answer the outside call.
To time your outside
calls:
The Call Timer starts automatically.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting/Camp On
After you call a busy extension, use Call Waiting to wait in line (i.e.,
Camp On) without hanging up. When you Camp On, the system sig-
nals the busy user indicating that you are waiting. Your call goes
through when the busy extension becomes free.
Call Waiting also helps when you are on the phone because it lets you
know when additional calls are trying to get through. Call Waiting lets
your callers wait in line without being forgotten.
Note: When you call a busy attendant, your call will normally "stack
up" in queue behind other waiting callers.
1. Call the busy extension. You must hear
busy tone.
To Camp On to a busy
extension:
2.
or
(Camp On).
3. Wait without hanging up.
Your Camp On Programmable
Function Key lights while you wait.
If you hang up, the system converts
your Camp On to a Callback (see page
26).
To Camp On to a trunk, see the Trunk
Queuing feature on page 123.
1. Hang up.
To cancel a Camp On
request:
If you skip step 2, the extension will
call you back when it becomes free.
2.
+
.
OR
(Camp On).
Your Camp On Programmable
Function Key goes out.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Callback
When you call a busy extension, you can leave a Callback request for
a return call. You do not have to repeatedly call the busy extension
back, hoping to find it idle. When you leave a Callback, the system
handles your request as follows:
G
When the busy extension becomes idle, the system rings you.
After you answer the Callback ring, the system then rings the for-
G
merly busy extension. (If that extension doesn't answer, the system
cancels the Callback.)
As soon as the other extension answers, the system sets up an
G
Intercom call between you and them.
If your phone has Automatic Callback, you answer the Callback ring
as soon as you lift the handset. If your phone doesn't have Automatic
Callback, you must press the ringing line appearance key to answer
the Callback ring.
1. Call a busy extension.
To place a Callback:
2.
or
(Callback).
3. Hang up.
4. Lift handset when busy extension calls
you back.
If you don't have Automatic Callback,
you'll have to press the ringing Line
Appearance key.
1.
+
.
To cancel a Callback:
OR
(Callback).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Caller ID allows a display keyset to show an incoming caller’s tele-
phone number (up to 12 digits) and optional name. The Caller ID
information can be displayed either before or after answering a call.
Normally, the system provides the Caller ID post-answer display.
With the pre-answer display, you can preview the caller’s number
before picking up the ringing line. Your Communications Manager
can tell you which option you have. This information is stored in
Caller ID bins.
Display telephone users have the ability to check the identity of an
incoming call while they are currently busy on a call. The type of
information that displays will depend on the type of call being
received. Intercom calls will display station names, while incoming
trunks calls will display Caller ID, ANI or the name assigned to the
line. Depending on the system programming, this information can be
displayed either automatically or manually.
Caller ID will temporarily store 16 calls (this included abandoned or
unanswered calls). New calls replace the old calls when the maximum
number of calls is reached.
1. Press
+
.
To display the name/
number for your
incoming call (with
Automatic Handsfree
on Incoming
If the Caller ID data includes the
name, you can scroll left and right by
pressing * and #.
2. Press
to answer the call.
Line/Loop Key calls):
1. Do not lift the handset and press
If the Caller ID data includes the
name, you can scroll left and right by
pressing * and #.
.
To display the
name/number for
your incoming call
(without Automatic
Handsfree enabled):
2.
or press
to answer the call.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
You can store the Caller ID data in the sys-
tem’s Caller ID Table or in one of your One
Touch keys.
To Automatically Add
New Numbers to the
Caller ID Table:
1. Press
(Caller ID Edit).
2. To store a number in a One Touch key:
Dial
(Personal) + Press
+
Press One Touch key that will store the
Caller ID information + (Optional - if
name is not sent from telco) If you see
ENTER NAME, enter the name you
want to associate with the stored number.
To store a number in a Common
Abbreviated Dialing Bin:
Dial
(Company) + Press
+
Dial the bin number in which you want
to store the number (0-999) + (Optional -
if name is not sent from telco) If you see
ENTER NAME, enter the name you
want to associate with the stored number.
You cannot edit a name if it was sent
from the telco.
Press
to toggle between upper
and lower case letters.
For information on entering names,
refer to the Name Storing feature.
When entering information into the
company Caller ID Table, if the table is
full, you will see a TABLE IS FULL
message after pressing
(Company).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
1. Press
2. Dial
.
To Manually Add New
Entries to the Caller ID
Table:
or press
(Caller ID Edit).
3. Dial (New).
If you see TABLE IS FULL, you can-
not add any more entries to the Caller
ID Table.
4. Enter the number you want to add to the
Caller ID Table.
For wild card entries, press FLASH.
This allows you to associate several
phone numbers with the same name.
For example, 926-540(FLASH) would
associate all numbers from 5400-5409
with the same name.
5. Press
.
6. Enter the name to be assigned to the number.
Refer to the Name Storing feature for
help on entering a name.
7. Press
.
8. Return to Step 3 to add another number
to the table or press to exit.
1. Press
.
To Manually Change
an Entry in the Caller
ID Table:
2. Dial
(Caller ID Edit).
or press
3. Dial
(Change).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
4. To find a name entry in the Table:
To Manually Change
an Entry in the Caller
ID Table (Cont’d):
G
Dial
.
G
Enter the name you want to change
and press
The system finds the first name that
.
matches the letters you entered.
OR
To find a number entry in the Table:
G
Dial
(No).
G
Dial the number you want to change
and press
Re-enter the highlighted number and
.
G
press
when you are done. You
return to Step 3.
You can quickly edit the name for the
selected number by pressing
.
5. Press
to exit.
1. Press
2. Dial
.
To Manually Delete an
Entry in the Caller ID
Table:
or press
(Caller ID Edit).
3. Dial (Delete).
4. To delete a number in the Table:
G
Dial
.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
G
Enter the name you want to delete
and press
To Manually Delete an
Entry in the Caller ID
Table (Cont’d):
.
The system finds the first name that
matches the letters you entered. To
search for other names with the same
letters, press
and
.
If you see NO MATCH, the name
doesn’t exist.
G
To delete the name, press
.
G
Dial
to confirm the deletion or
dial
to cancel. In either case, you
return to Step 3.
You can quickly edit the number for
the selected name by pressing CHECK.
OR
To delete a number in the Table:
G
Dial
(No).
G
Dial the number you want to delete
and press
When you find the number you want
to delete, press
.
G
.
G
Dial
to confirm the deletion or
dial
to cancel. In either case,
you return to Step 3.
You can edit the name for the selected
number by pressing CHECK.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
1. Press
2. Dial
.
To check if any Caller
ID calls rang your
phone while you
were away from your
desk:
. If you missed any
calls, the displays shows MISSED
CALL C:2 E:3
The second row of your display
shows the Caller ID number you
missed. To see the name (if sent from
the telco), press CHECK.
If you missed more than one call,
press
and
to see the list.
3. To call the displayed number, dial
.
OR
To erase the displayed number without
returning the call, dial
4. Press to hang up.
.
1. While on a call with a second call ring-
To manually display
caller information for
a second call:
ing in, press
flashing
and then press the
.
The display indicates the caller infor-
mation.
2. To clear the display, either press CLEAR
or it will clear on it’s own.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference
Conference lets you add additional inside and outside callers to your
conversation. With Conference, you can set up a multiple-party tele-
phone meeting without leaving the office. The system allows either
four or eight parties maximum per Conference.
In addition to Conference, there are other ways to have a telephone meet-
ing. See Voice Call Conference (page 34), Meet Me Conference (page
63), Meet Me Paging (page 65) and Tandem Trunking (page 115).
1. Place or answer call.
To set up a
Conference:
2.
or
(Conference).
3. Place or answer next call.
To access the outside call, either
press
or dial a trunk access
code. See Outside Calls on pages 84
and 86 for more.
4.
or
(Conference).
You may be able to have up to 32
callers. Repeat this step to add more
parties.
5. After adding all parties, press
again to begin the Conference.
1.
to hang up.
To exit a Conference
(without affecting the
other parties):
You can set up a Conference with two
outside callers and then drop out of the
call - leaving the callers talking in an
Unsupervised Conference. Refer to
Tandem Trunking on page 115 for more.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference, Voice Call
With Voice Call Conference, others in your work area can easily join
into your outside calls. To initiate a Voice Call Conference, press a
uniquely programmed Voice Call Conference key and tell your co-
workers to join the call. The system releases the privacy on the line,
and other users can just press the line key to join in. The system allows
either four or eight parties maximum per Conference. Voice Call
Conference does not use the telephone system features to announce the
call. You just announce it "through the air" to your co-workers.
In addition to Voice Call Conference, there are other ways to have a tele-
phone meeting. See Conference (page 33), Meet Me Conference (page
63), Meet Me Paging (page 65) and Tandem Trunking (page 115).
1. Place or answer trunk call.
To set up a Voice Call
Conference with a co-
worker in your imme-
diate work area:
2.
(Voice Call Conference).
3. Announce Voice Call Conference.
Just tell your co-worker's about the
call. Do not use telephone system fea-
tures to announce it.
1. After Conference request, press indicated
To join a Voice Call
Conference
line key (
).
(if invited):
1.
to hang up.
To exit a Voice Call
Conference without
affecting the other
parties:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Department Calling
If you work closely with a group of co-workers, your
Communications Manager may have programmed you into a
Department Calling Group. Department Calling makes it easier for
others in your company to send calls to your group. This is because
your Department Calling Group has a dedicated pilot number. To get a
free group member, co-workers can just dial the pilot number instead
of the group member's extensions. If you don't want to receive
Department Calls, you can log out of your group. You can log back in
when you again want to receive calls.
Calls into your Department Group can route in two different ways:
Priority Routing and Circular Routing. With Priority Routing, incom-
ing calls route to your group's highest priority extensions first.
Priority Routing
Call
Call
Call
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Department Calling
With Circular Routing, each call rings a new extension.
Circular Routing
Call 1
Call 2
Call 3
Call 4
1.
1.
+ Department Group pilot number.
To call a Department
Group:
+
+
.
To log out of your
Department Group:
OR
(Department Group log out).
The key lights while you are logged out.
1.
1.
+
OR
+
.
To return to your
Department Group:
(Department Group log out).
The key goes out when you log back in.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Department Step Calling
If you place an Intercom call to a busy Department Group member,
Department Step Calling allows you to quickly call another member in
the same group. You don't have to hang up and place another Intercom
call. You can also use Department Step Calling to cycle through the
members of a Department Group.
1. Place call to busy Department Group
To make a Step Call:
member.
OR
Place call to Department Group pilot
number.
2.
or
(Step Call).
3. Repeat step 2 to call other Department
Group members.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial Number Preview
Use Dial Number Preview to preview a number in your telephone's
display before you dial it out. This helps you avoid dialing errors. For
example, if you review the previewed number and find an error, you
can cancel the number and re-enter it correctly. Dial Number Preview
is available for both outside and Intercom calls.
1. Do not lift handset or press
.
To use Dial Number
Preview to place a
call:
2.
3.
+ Number you want to preview.
to dial out the displayed number. If
the displayed number is an outside num-
ber, it must contain a line access code.
OR
to cancel the number without dial-
ing it out.
OR
to dial out the displayed outside
number on the selected line.
If your previewed outside number has
a trunk access code (e.g., 9), you can
press
instead.
The system will not automatically
strip out a trunk access code when you
press a line key.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial Pad Confirmation Tone
When you enable Dial Pad Confirmation Tone for your extension, you
hear a beep each time you press a dial pad key. This beep reminds you
that you have pressed a key. The confirmation tone is particularly
helpful for Intercom calls and calls on Dial Pulse lines. For these types
of calls, you don't hear tones echoed back to your handset or speaker
to confirm your dialing.
1.
2.
+
.
To enable or disable
Dial Pad Confirmation
Tone:
You hear confirmation beeps.
to hang up.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Directed Call Pickup
Use Directed Call Pickup when you need to answer a call ringing
another extension without leaving your phone. This lets you easily
cover a co-worker's calls when they have to be away from their desk.
1.
2.
or
.
To intercept calls ring-
ing a co-worker's
phone:
.
3. Dial your co-worker's extension number.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory Dialing
If you have a Display or Super Display phone, Directory Dialing
allows you to select a co-worker or outside number from a list of
names, rather than dialing the phone number. There are four types of
Directory Dialing:
C - Company (Common) Abbreviated Dialing
D - Department (Group) Abbreviated Dialing
P - Personal Abbreviated Dialing (One-Touch Keys)
X - Co-worker’s extension
Directory Dialing follows any feature restrictions that your system may
have enabled. For example, if your extension cannot normally use
Common Abbreviated Dialing, Directory Dialing can’t access it either.
1. Do not press
or
.
To use Directory
Dialing from a display
keyset:
2.
or
(Directory Dialing).
If you wait too long between your
selections, Directory Dialing automati-
cally cancels.
3. Dial the type of Directory Dialing from
the table below:
2 (C) = Company (Common
Abbreviated Dialing)
3 (D) = Department (Group)
Abbreviated Dialing
7 (P) = Personal Abbreviated
Dialing (One-Touch Keys)
9 (X) = Extensions
If you dial 7 from a Super Display
keyset, your One-Touch Key names will
display. Pressing
or
scrolls through the names in key number
order (not alphabetically).
4. Dial the first letter/number for the
name/number you want to call.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory Dialing
For example, dial 2 if the name
To use Directory
Dialing from a display
keyset (Cont’d):
begins with A, B, C or 2.
If the name begins with Q or Z, dial 0.
5. Look at your phone’s display and dial the
digit for the letter/number selected in
step 4 above.
For example, if you dialed 2 in step
four, you’ll see: 1=A 2=B 3=C 4=2.
You’ll want to dial 1 to select the letter
A, 2 to select B and so on.
The first name/number that begins
with your selection displays.
If you see, “UNLISTED NAME,” there
is no name stored for your selection.
If you have a Super Display keyset,
the first 10 numbers that match your
selection will display. To see the next 10
matches, press [SCROLL]. To see the
previous 10 matches, press [->].
6. Press
or
to scroll
through all the names/numbers that begin
with that letter/number.
OR
or press
,
or
to
place the selected call.
1. Press
.
To cancel Directory
Dialing:
1. Press
(Directory Dialing).
To review your
Directory Dialing
entries while on a call:
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Do Not Disturb
Do Not Disturb (DND) blocks incoming calls, Call Forwards and
Paging announcements to your extension. DND permits you to work
undisturbed at your desk without interruptions from your phone. When
you activate DND, incoming calls still flash your line keys. While in
DND, you may use your phone in the normal manner for placing and
processing calls.
There are four Do Not Disturb options:
Do Not Disturb Options
1
2
Blocks your outside calls
Blocks Paging, Intercom calls, Call
Forwards and transferred outside calls
Blocks all calls
Blocks Call Forwards
Cancels Do Not Disturb
3
4
0
1. Do not lift the handset.
To activate or deacti-
vate Do Not Disturb:
2.
OR
+
.
If you wait more than 10 seconds
before going to step 3, your system
automatically enables option 3. If you
already have DND enabled, waiting
more than 10 seconds cancels it.
3. Dial the DND option code (0-4).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Door Box
Your system may have Door Boxes. A Door
Box is a self-contained Intercom unit typi-
cally used to monitor entrance doors. A vis-
itor at the door can press the Door Box call
button (like a door bell). The Door Box
then sends chimes to certain extensions. If
you receive Door Box chimes, you can just
lift the handset to answer them. You can
then talk to the visitor at the door.
Door Boxes come in handy at delivery
entrances. Your company doesn't have to have someone at the door to
monitor the entrance. You can just answer the Door Box instead. If the
door has an electric strike, you can even use your telephone to release
the door.
1.
1.
+
+ Door Box
To call a Door Box:
number (1-8).
To answer a Door Box
chime:
1. While talking to the Door Box, press
.
To activate the Door
Box strike:
44
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
If you do a lot of call processing (like
an operator or dispatcher), you may
have either a 110-Button or 24-Button
Direct Station Selection (DSS)
Console. The DSS Console gives you
a Busy Lamp Field (BLF) and one-
button access to extensions, trunks
and certain system features. Use the
DSS Console to help you:
G
Call Extensions and Door Boxes
Place, answer and Transfer outside calls
Make Internal or External Pages
Switch the Night Service mode
Activate DSS Console Alternate Answer (i.e., redirect your calls to
another DSS Console)
G
G
G
G
Your DSS Console may also have keys stored with dialing codes or
Programmable Function Key operations. This gives your DSS
Console many of the features available on One-Touch and function
keys. Check with your Communications Manager to see if your con-
sole has these functions.
1. With the 110-button console, press
EXT.1 or EXT.2 to select the range.
On 28i/124i, EXT.2 selects outside lines.
2. Press DSS Console key.
To call an extension
from your DSS
Console:
If your call voice-announces, you can
make it ring by dialing 1. If you don't
have Handsfree, lift the handset to speak.
Extension BLF
If DSS key is . . .Extension is . . .
On
Off
Busy on a call
Idle
Flashing fast In DND
45
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
1. Press DSS Console key assigned to out-
To place an outside
call from your DSS
Console:
side line.
On 28i/124i, pressing EXT. 2 selects
the DSS keys for outside lines.
2. Dial outside telephone number.
If you don't have Handsfree, you
must lift the handset to speak.
Outside Line BLF
If DSS key is . . .Outside line is . . .
On
Off
Busy on a call
Idle
Flashing slowly
Ringing
1. Press flashing DSS Console key
assigned to outside line.
To answer an outside
call from your DSS
Console:
1. Press DOOR + DSS Console key for
To call a Door Box
from your DSS
Console:
Door Box you want to call (1-8).
If you don't have Handsfree, you
must lift the handset to talk to the Door
Box.
Door Box BLF
If DSS key is . . .Door Box is . . .
On
Off
Busy or ringing in
Idle
46
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
1. Place or answer call.
To Transfer a call
using your DSS
Console:
If you are on an Intercom call, press
before going to the next step.
2. Press DSS Console key for extension
that will receive Transfer.
You cannot Transfer to an extension
that is busy or in DND.
3. (Optional) Announce call.
If the called party doesn't want the
call, press flashing
to retrieve it.
4.
to hang up.
1. Press PAGE (for External Paging) or
GROUP (for Internal Paging).
To make a Page using
your DSS Console:
2. Press DSS Console Paging key.
DSS keys 1-8 are for External Paging
zones 1-8. DSS keys 1-64 are for
Internal Paging zones 1-64. (If the zone
is busy, try again later.)
If you don't have Handsfree, lift the
handset to make your announcement.
Paging BLF
If DSS key is . . .
Zone is . . .
Busy
On
Off
Idle
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
1. Press Night Service key (NIGHT, DAY,
BREAK or NITE 2).
Switching the Night
Service mode from
your DSS Console:
Night Service BLF
If this key is lit . . . System in in the . . .
NIGHT
DAY
BREAK
NITE2
Night Mode
Day Mode
Rest Mode
Midnight Mode
1. Press ALT.
To activate DSS
Console Alternate
Answer:
You hear a short confirmation tone.
If you hear a long tone, you cannot
enable Alternate Answer. Another user
has already enabled your console as
their Alternate Answer destination.
Alternate Answer BLF
When the ALT Alternate Answer
key is . . .
On
is . . .
Enabled
Disabled
Off
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash
Flash allows you to access certain features of the telephone company
or PBX to which your phone system is connected. This lets you take
full advantage of whatever features the connected telephone company
or PBX offers. Flash accesses these features by momentarily interrupt-
ing the loop current on your outside line. This is much like briefly
pressing and then releasing the hookswitch on your telephone at home.
1.
To flash the outside
line you are on:
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Forced Trunk Disconnect
Forced Trunk Disconnect enables you to disconnect (release) another
extension's active outside call if you need to use their line. You can
then place a call on the released line.
C A U T I O N
Forced Trunk Disconnect abruptly terminates the active
call on the line. You should use this feature only in an
emergency and when no other lines are available.
1. Press
for the busy trunk.
To disconnect a busy
trunk:
OR
Dial trunk access code (e.g.,
+ trunk number).
2.
.
You hear confirmation beeps as the
system disconnects the line. You can
now place a call on the free line.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
General Message
This feature requires a Voice Announce Unit (VAU).
G
A General Message is a prerecorded Voice Announce Unit (VAU)
message to which you and your co-worker's can listen. This message
typically contains important company information that all employees
should hear.
1. Do not lift the handset or press
2.
.
To listen to the
General Message:
1.
+
.
To record, listen to or
erase your General
Message:
2. To record, dial
.
OR
To listen, dial
.
OR
To erase, dial
.
If you dial 5 or 7, you can dial # to
hear the message again.
If you dial 3, you can press HOLD to
cancel before going to the next step.
3.
to hang up.
MW flashes on each phone until the
user listens to the message.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Group Call Pickup
If you frequently work together with the same people, your extensions
may be in a Call Pickup Group. This allows you and your co-workers
to use Group Call Pickup to easily answer each other's ringing calls.
Group Call Pickup also helps if you frequently cover for co-workers
in another Pickup Group. When a call rings one of their phones, you
can intercept it even if you don't know their extension numbers.
With Group Call Pickup, you can intercept the following types of calls:
G
A call ringing an extension in your own Pickup Group.
A call ringing an extension in another Pickup Group when you
G
know the group number.
A call ringing an extension in another Pickup Group when you
G
don't know the group number.
1.
+
OR
(Pickup).
.
To answer a call ring-
ing another phone in
your Pickup Group:
+
When you don't know the Pickup Group
Number
To answer a call
ringing a phone in
another Pickup
Group:
1.
+
(Pickup).
OR
+
.
When you know the Pickup Group number
1. (Pickup).
+
OR
+
+ Pickup
Group number (1-9 or 01-64).
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Group Listen
Use Group Listen when you want others in your office to listen in on
your call. While you talk on the handset, your caller's voice broadcasts
over your telephone's speaker. Group Listen automatically turns your
Handsfree microphone off so your caller cannot hear the conversation
in your office.
1. Place or answer call using the handset.
To initiate Group
Listen:
2.
twice (but do not hang up).
SPK flashes slowly.
You can talk to the caller through
your handset. Your co-workers hear
your caller's voice over your phone's
speaker.
When you press SPK once, you turn
your Speakerphone on and your handset
off. The second press turns on Group
Listen.
1.
To talk Handsfree
after initiating Group
Listen:
You must have a speakerphone for
Handsfree operation.
1. Do not hang up + Press flashing
.
To cancel Group
Listen (without hang-
ing up your call):
You can talk to your caller over your
handset. Your co-workers can no longer
hear your caller's voice.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Handsfree and Monitor
When it's inconvenient to hold the handset, you can use the speaker
and microphone in your telephone and talk Handsfree instead.
Handsfree is great when you don't have a free hand for the phone.
(For example, you may want to enter data at a computer terminal
while talking to a customer on the phone.)
There are three types of Handsfree operation:
Handsfree
You can place and answer calls by pressing
SPK instead of using the handset. You must
have a Speakerphone to have Handsfree.
Check with your Communications Manager.
You can press a line or line appearance key
without first lifting the handset or pressing
SPK. Your Communications Manager may
have enabled this option for you.
Automatic
Handsfree
Monitor
You can place a call without lifting the handset,
but you must lift the handset to speak. You
always have this option - regardless of the type
of phone you have or how your system is set up.
1.
or
or
.
To talk Handsfree:
2. Place call.
3. Speak toward phone when called party
answers.
1.
2.
and hang up the handset.
To change a handset
call into a Handsfree
call:
to hang up when you are done.
1.
To change a
Handsfree call into a
handset call:
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset Operation
To get even more freedom and convenience than with Handsfree, pur-
chase a Headset and connect it to your telephone. In addition to hav-
ing your hands free for other work, you'll have privacy on a call that is
not available with Handsfree.
1. Unplug the telephone handset and plug
in the headset.
To enable the
headset mode:
2. Press
OR
(Headset).
+
.
You hear a confirmation beep. The
headset key lights when you
enable the headset mode.
You can still receive and respond to
voice-announced Intercom calls while in
the headset mode.
1.
to make an outside call.
While you're in the
headset mode:
OR
to get Intercom dial tone.
OR
If on a call,
to hang up.
1. Unplug the headset and plug in the hand-
set.
To disable the head-
set mode:
2.
(Headset).
OR
+
.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Hold
Don't place your handset down on the desk when you need your caller
to wait, use Hold instead. Hold places your call in a temporary waiting
state until you can get back to it. While the call waits, you can process
calls or use other features. And don't worry if you forget about the call
and leave it on Hold too long - it will recall back to you.
Your telephone system provides four types of Hold (see the chart below).
Your Communications Manager can tell you which types you can use.
System Hold For your normal calls . . .
When you place an outside call on System Hold,
it flashes your line key and the line keys on your
co-worker's phones as well. Either you or anoth-
er co-worker can pick up the call on Hold.
Exclusive
Hold
For high priority calls . . .
After you place an outside call on Exclusive Hold,
it flashes your line key but looks busy to your co-
workers. Only you can pick up the call from Hold.
Group Hold
Put calls on Hold for your Department Group . . .
If you are a member of a Department Calling
Group, you can use Group Hold. When you
place an outside call on Group Hold, only you
and the members of your Department Calling
Group can pick it up.
Intercom Hold While talking to a co-worker . . .
Intercom calls can also go on Hold. However,
the Intercom call on Hold stays on your phone.
Another extension user cannot pick it up.
System Hold
1.
To place an outside
call on System Hold:
The
or
key flashes
slowly while on Hold; flashes fast when
recalling.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Hold
1. Pressing flashing
.
To pick up an outside
call on System Hold:
Exclusive Hold
1.
(Exclusive Hold).
key flashes fast while on
Hold; flashes slowly when recalling.
To place an outside
call on Exclusive Hold:
The
1. Pressing flashing
.
To pick up an outside
call on Exclusive Hold:
Group Hold
1.
1.
+
+
+
to hang
To place a call on
Hold so anyone in
your group can pick it
up:
up.
.
To pick up a call on
Group Hold:
Intercom Hold
1.
1.
+
+
to hang up.
To place an Intercom
call on Hold:
.
To pick up an
Intercom call from
Hold:
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Hotline
When you need one-button calling and Transfer to a co-worker, use
Hotline. You'll find Hotline to be a great convenience if there is some-
one in your company with whom you work closely (such as your busi-
ness partner). You and your partner can call or Transfer calls to each
other just by pressing a single key.
Your Hotline key shows the status of your Partner's extension:
When the key is . . .
Your partner's phone is . . .
Off
On
Fast Flash
Idle
Busy or ringing
In Do Not Disturb
1.
(Hotline).
Optionally lift the handset.
To place a call to your
Hotline partner:
1.
(Hotline) + Announce call and
hang up.
OR
To Transfer your out-
side call to your
Hotline partner:
(Hotline) + Hang up to have
your call wait at your Hotline partner
unannounced.
If unanswered, the call recalls to you.
1. If you hear two beeps, speak toward the
To answer a call from
your Hotline partner:
phone.
OR
If your telephone rings,
or
.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom
Call a co-worker over the Intercom. Normally, you are not restricted
from placing an Intercom call to any other extension. However, if your
telephone system is shared by several businesses, you may not be able
to call the other business's extensions. Check with your
Communications Manager.
1.
+ Extension number.
To place an Intercom
call:
You can optionally dial 0 for your
operator or *8 for your Voice Mailbox.
If the extension you call is busy or
doesn't answer, you can (without hang-
ing up):
- Dial another extension.
- Dial 8 to leave a message in your
co-worker's mailbox.
For one-touch calling, see Hotline
(page 58), Call Coverage (page 71) or
One-Touch Keys (page 78) instead.
1. If you hear two beeps, speak toward the
To answer an
Intercom call:
phone.
Your telephone picks up your voice.
OR
If your telephone rings,
.
Intercom calls you place may either ring or voice-announce at your
co-worker's extension. What happens depends on how your co-work-
er's extension is set up. You can, however, dial a code to change from
one method to the other.
The Intercom calls you receive can also either ring or voice-announce.
You decide the best way to answer your Intercom calls and then
enable the option you want.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom
1.
To change the mode
of an Intercom call
you placed:
If the call is ringing, this makes it
voice-announce. If the call voice-
announces, this makes it ring.
1.
1.
+
+
to hang
To make your incom-
ing Intercom calls
voice-announce:
up.
up.
+
+
to hang
To make your incom-
ing Intercom calls
ring:
Intercom Abandoned Call Display
You can display a list of the Intercom calls placed to you while you
were away from your phone.
1.
2.
+
.
To display the list of
Intercom calls you did
not answer:
Press CALL2 repeatedly until no
more calls display.
to return to the normal Time and
Date display.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Last Number Redial
Instead of dialing a busy or unanswered outside call again, quickly
redial it with Last Number Redial. Last Number Redial stores the last
outside call you placed in memory so you can easily recall it. The
stored number can be up to 24 digits long, using 0-9, # or *.
You can also quickly redial your last call using Repeat Redial (page
103) and Save Number Dialed (page 107).
1.
+
+
.
To redial your last
call:
If you don't press a line key, the sys-
tem automatically selects a trunk from
the same group as your original call.
OR
+
.
The system automatically selects a
trunk from the same group as your
original call.
1.
To check the stored
number:
The stored number displays for six
seconds. The stored number dials out if
you:
- Lift the handset
- Press an idle line key
- Press an idle CALL key, or
- Press SPK
2.
1.
+
.
To erase the stored
number:
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Line Preference
Line Preference determines how you place and answer calls. There
are two types of Line Preference: Incoming Line Preference and
Outgoing Line Preference. Ask your Communications Manager which
type you have.
Incoming
Line
Preference
Incoming Line Preference sets how you
answer calls. When a call rings your phone,
lifting the handset answers either the ringing
call (Ringing Line Preference) or seizes an idle
line (Idle Line Preference). If you primarily
answer calls and seldom place calls, Ringing
Line Preference is for you. If you normally
place calls and seldom answer them, then Idle
Line Preference is for you.
Outgoing
Line
Preference
Outgoing Line Preference sets how you place
calls. With Outgoing Intercom Line
Preference, you hear Intercom dial tone when
you lift the handset. With Outgoing Trunk Line
Preference, you get dial tone on an outside
line when you lift the handset. If you normally
call co-workers, use Outgoing Intercom Line
Preference. If you frequently call outside your
company, use Outgoing Trunk Line
Preference.
If you have Incoming Idle Line Preference,
Outgoing Line Preference also determines how
your phone works as a call rings.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Me Conference
Use Meet Me Conference to have a telephone meeting which lets oth-
ers join if they choose. After you announce the Meet Me Conference
over the Paging, a co-worker joins the meeting by dialing the Meet
Me Conference code. There are two types of Meet Me Conference:
Meet Me External Conference and Meet Me Internal Conference. With
Meet Me External Conference, announce the meeting with External
Paging. With Meet Me Internal Conference, announce the meeting
with Internal Paging. The system allows either four or eight parties
maximum per Meet Me Conference.
In addition to Meet Me Conference, there are other ways to have a
telephone meeting. See Conference (page 33), Voice Call Conference
(page 34), Meet Me Paging (page 65) and Tandem Trunking (page
115).
Meet Me External Conference
1. While on a call, press
.
To make a Meet Me
External Conference:
2.
+ External Paging zone
(1-8 or 0 for All Call).
OR
(External Paging).
You can optionally press CALL1 and
dial combined zones *10 to *18 instead.
See Paging on page 90 for more on
combined zones.
3. Announce the zone.
4.
twice when co-worker answers
your page.
5. Repeat steps 1-4 for each co-worker you
want to add.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Me Conference
1.
+
+ External
To join a Meet Me
External Conference:
Paging zone (1-8 or 0 for All Call).
You connect to the other parties.
Meet Me Internal Conference
1. While on a call,
.
To make a Meet Me
Internal Conference:
2.
+ Internal Paging zone
(0-9 or 00-64).
OR
(Internal Paging).
You can optionally press CALL1 and
dial combined zones *10 to *18 instead.
See Paging on page 90 for more on
combined zones.
3. Announce the call.
4.
twice when co-worker answers
your page.
5. Repeat steps 1-4 for each co-worker you
want to add.
1.
+
(if your phone
To join a Meet Me
Internal Conference:
is in the zone called).
OR
+
+ Zone (0-9 or
00-64) (if your phone is not in the zone
called).
OR
(Internal Paging Zone Answer)
(if your phone is in the zone called).
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Me Paging
Need to talk to a co-worker and don't know where they are? Meet Me
Paging allows you to set up a private meeting on a Page zone. While
you meet on the zone, no one else can hear your conversation, join in
or make an announcement using that zone. There are two types of
Meet Me Paging: Meet Me External Paging and Meet Me Internal
Paging. With Meet Me External Paging, you hold the meeting on an
External Paging zone. With Meet Me Internal Paging, you hold the
meeting on an Internal Paging zone.
In addition to Meet Me Paging, there are other ways to have a tele-
phone meeting. See Conference (page 33), Voice Call Conference
(page 34), Meet Me Conference (page 63) and Tandem Trunking
(page 115).
Meet Me External Paging
1.
+
+ External
To make a Meet Me
External Page:
Paging zone (1-8 or 0 for All Call).
OR
(External Paging Zone).
2. Announce the zone.
You can optionally press CALL1 and
dial combined zones *10 to *18 instead.
See Paging on page 90 for more on
combined zones.
1.
+
+ External
To join a Meet Me
External Page:
Paging zone (1-8 or 0 for All Call).
You connect to the other party.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Me Paging
Meet Me Internal Paging
1.
+
+ Internal
To make a Meet Me
Internal Page:
Paging zone (0-9 or 00-64).
OR
(Internal Paging Zone).
You can optionally press CALL1 and
dial combined zones *10 to *18 instead.
See Paging on page 90 for more on
combined zones.
2. Announce the zone.
1.
+
(if your phone
To join a Meet Me
Internal Page:
is in the zone called).
OR
(Internal Paging Zone Answer)
(if your phone is in the zone called).
OR
+
(if your phone
is not in the zone called).
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo Dial
While on an outside call, use Memo Dial to jot a number down in
your phone's memory. Memo Dial is like a notepad. For example, if
you dial Directory Assistance and ask for a number, you can use
Memo Dial to remember it. You can then quickly call the stored
Memo Dial number after you hang up.
1.
2.
(Memo Dial) + Dial number you
want to store + (Memo Dial).
To store a number
while on a call:
Continue with conversation.
to hang up when you are done.
1. Do not lift the handset +
Dial).
(Memo
To call a stored Memo
Dial number:
2.
The stored number dials out only if
you store a trunk access code before the
number.
OR
The stored number dials out.
1. Do not lift the handset +
(Memo
To check the stored
Memo Dial number:
Dial).
The stored number displays.
1.
2.
+
(Memo Dial).
To erase the stored
Memo Dial number:
to hang up when you are done.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Waiting
Don't keep recalling a busy or unanswered co-worker. Leave them a
Message Waiting request for a return call instead. The request is a
flashing
lamp at the extension you call and a steadily lit
lamp on your phone. When your co-worker answers the Message
Waiting, they automatically call your extension. And if someone
leaves you a Message Waiting, you'll know you didn't miss their call.
In addition, Message Waiting lets you:
G
View and selectively answer messages left at your display extension.
Cancel messages left at your extension.
Cancel messages you left at other extensions.
G
G
You can leave messages at any number of extensions simultaneously.
Also, any number of co-workers can leave you a message at the same
time.
1. Call busy or unanswered extension.
To leave a Message
Waiting:
2.
3.
or
(Message Waiting).
to hang up.
Your MW lights.
When you have a Message Waiting, MW
flashes fast.
To answer a Message
Waiting:
1.
+
.
OR
+
(Message Waiting).
If the called extension doesn't answer,
dial 0 or press (Message
Waiting) to leave them a message.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Waiting
These are the messages co-workers left at
your extension. The messages left first
display first.
To display/check your
Messages Waiting list:
1.
+
+
or
to scroll through your messages.
Press your Message Waiting key or
CALL1 to call the displayed extension.
2.
to return to the Time and Date dis-
play.
OR
1.
2.
(Message Waiting).
or
to scroll through your
messages.
Press your Message Waiting key or
CALL1 to call the displayed extension.
This includes messages you have left for
other extensions and messages other
extensions left for you.
To cancel all your
Messages Waiting:
1.
2.
+
.
to hang up.
1.
2.
+
+ Extension.
To cancel messages
you left at an
extension:
to hang up.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Microphone Cutoff
Turn your telephone's Handsfree and handset microphone off when
you don't want your caller to hear your voice. When you turn your
Handsfree or handset microphone off, it stays off until you choose to
turn it back on.
1.
To turn your
Handsfree micro-
phone off and on:
This turns your Handsfree micro-
phone off. You can press this key any-
time while your phone is idle, busy on a
call or ringing.
OR
This turns your Handsfree micro-
phone back on.
1.
(Microphone Cutoff).
To turn your
Handsfree and hand-
set microphone off
and on:
You hear confirmation beeps. Your
mic is off when the key is lit.
You can press this key anytime while
on an outside call. For Intercom calls,
you can only press this key when the co-
worker you call lifts the handset or
presses
to answer.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple Directory Numbers/Call Coverage
Multiple Directory Numbers
Multiple Directory Numbers allow you to have more than one exten-
sion number. In addition to your "normal" extension number (e.g.,
320), you can have additional "virtual" extension numbers on Multiple
Directory Number function keys. For example, you can have virtual
extension number 600 for your sales calls. When a call routes to 600,
it goes to your Multiple Directory Number key assigned to virtual
extension 600. In this way, you can easily tell calls to your extension
from sales-specific calls. Check with your Communications Manager
to see if you have any Multiple Directory Number keys.
Call Coverage
Use a Multiple Directory Number key assigned to a co-worker's exten-
sion when you need Call Coverage for their calls. The Multiple
Directory Number key shows you when your co-worker is busy and
flashes slowly when they have an incoming call. You can even press
the key to intercept the incoming call.
You can have Multiple Directory Number keys for many different
extensions and virtual extensions. In addition, you and other co-work-
ers can share the same Multiple Directory Number keys. For example,
everyone in your department could have a key for the sales virtual
extension. Your Multiple Directory Number keys can ring or not ring.
Your Communications Manager can tell you how your keys are set up.
1. Press flashing
(Multiple
To answer a call
ringing your Multiple
Directory Number/Call
Coverage key:
Directory Number).
1.
To place a call to a
Multiple Directory
Number:
2.
(Multiple Directory Number).
OR
Dial virtual extension number.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Name Storing
You can program a name for your extension. The name can be up to
10 digits long. When you call a co-worker that has a display tele-
phone, they see your name instead of your extension number. Your co-
worker knows who's calling without having to look up your extension
number.
Use the following chart when entering or editing your name. When
using the One-Touch (DSS) keys, press the key once for the first char-
acter, twice for the second character, etc. For example, to enter a C,
press DSS1 three times.
Keys for Entering Names
Use this key . . .
When you want to . . .
DSS1
Enter characters A-D. After selecting
your entry, press CHECK to have the
system accept it.
DSS2
DSS3
DSS4
DSS5
DSS6
DSS7
Enter characters E-H. After selecting
your entry, press CHECK to have the
system accept it.
Enter characters I-L. After selecting
your entry, press CHECK to have the
system accept it.
Enter characters M-P. After selecting
your entry, press CHECK to have the
system accept it.
Enter characters Q-T. After selecting
your entry, press CHECK to have the
system accept it.
Enter characters U-Z. After selecting
your entry, press CHECK to have the
system accept it.
Enter a hyphen (-). After selecting
your entry, press CHECK to have the
system accept it.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Name Storing
Keys for Entering Names
Use this key . . . When you want to . . .
DSS8
DSS9
Enter a blank space. After selecting
your entry, press CHECK to have the
system accept it.
Enter extended ASCII characters.
Press repeatedly to scroll through the
list. After selecting your entry, press
CHECK to have the system accept it.
Enter punctuation marks. Press repeat-
edly to scroll through the list. After
selecting your entry, press CHECK to
have the system accept it.
DSS10
CHECK
Save text entry as part of the name
when you want to select it. You need
to press CHECK after selecting char-
acters from One-Touch Keys 1-10.
You don't need to press CHECK after
dialing a dial pad digit (0-9, # and *).
Clear the text entry if you want to start
over.
CLEAR
Dialpad digits 0-9,
# and *.
Enter number, # and * as part of the
name. You don't need to press CHECK
after entering these characters.
1.
+
+ Enter name
To program your
extension's name:
(see the chart above).
Your name can be up to 10 digits
long.
2.
3.
.
You hear confirmation beeps.
to hang up.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Night Service
You may be able to activate Night Service for your system. Used after
normal working hours, Night Service redirects your system's incoming
calls to where they should ring at night. For example, when most of
your co-workers have left for home, your system may redirect calls to
the security desk. When you activate Night Service, select one of eight
modes of operation:
G
Day Mode - normal working hours.
Night Mode - after hours (usually evening).
Midnight Mode - late at night to early in the morning.
Rest Mode - lunch and early evening (dinner time).
Day Mode 2 - normal working hours.
Night Mode 2 - after hours (usually evening).
Midnight Mode 2 - late at night to early in the morning.
Rest Mode 2 - lunch and early evening (dinner time).
G
G
G
G
G
G
G
There are two types of Night Service ringing for outside calls:
Assigned Night Answer (ANA) and Universal Night Answer (UNA).
With ANA, specific telephones are programmed to ring at night (like
the security desk in the example above). UNA causes incoming calls
to ring over the External Paging speakers. If your extension has a line
key for the call, just press the line key to pick up the UNA call. In
addition, you may be able to dial the Universal Answer Code to pick
up calls for which you don't have line keys.
Your system may switch Night Service modes automatically. Check
with your Communications Manager if this happens, and when the
switch-over occurs.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Night Service
1.
+
+ Night Service
To activate Night
Service by dialing
codes:
Password.
The Night Service Password is nor-
mally 0000. Check with your
Communications Manager.
2. Dial the Night Service Mode: 0= Day
Mode, 1 = Night Mode, 2 = Midnight
Mode, 3 = Rest Mode, 4= Day 2 Mode,
5 = Night 2 Mode, 6 = Midnight 2
Mode, 7 = Rest 2 Mode
You hear confirmation beeps.
3.
1.
to hang up.
(Night Service).
You hear a beep and the key lights to
indicate the mode selected:
Day Mode Key
To activate Night
Service using pro-
grammable keys:
Night Mode Key
Midnight Mode Key
Rest Mode Key
Day 2 Mode Key
Night 2 Mode Key
Midnight 2 Mode Key
Rest 2 Mode Key
1.
+
.
To use Universal
Answer to pick up a
UNA call:
You are connected to the call.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Off Hook Signaling
Trying to get in touch with a co-worker who is busy on a handset call?
Use Off Hook Signaling to let your co-worker know you're trying to get
through. The off hook signal you send to your co-worker is either ringing
or a voice announcement over their idle (second) line appearance.
Your phone system provides four Off Hook Signaling options (see
the chart below). Ask your Communications Manager which options
you have.
Automatic
Signaling
Calling a busy extension automatically
initiates Off Hook Signaling. You'll find this
option helpful if you are someone that must
quickly process calls (such as a receptionist or
operator).
Manual
Signaling
After reaching a busy extension, manual
signaling gives you the choice of using Off
Hook Signaling or activating another feature.
If you don't have Automatic Signaling, you
have Manual Signaling.
Selectable Off
If your extension has Handsfree, you can have
Hook Signaling Off Hook Signaling ring your phone's second
Mode
channel or voice announce - at your discretion.
There are four types of Off Hook Signaling
rings you can receive (ask your
Communications Manager):
- Muted off hook ringing
- Normal off hook ringing
- Two beeps over the speaker
- One beep in the handset
Called
Extension
Block
You extension may block Off Hook Signaling
from other extensions. Use this option if you
don't like to be interrupted while on a call.
If the extension you call has Handsfree . . .
When your off hook signal voice-announces, your co-worker can
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Off Hook Signaling
respond by just speaking toward their phone. Their telephone's
Handsfree microphone picks up their voice. Your co-worker's initial
call continues uninterrupted.
If the extension you call does not have Handsfree . . .
Your co-worker receives Off Hook Signaling ring. They must first
place their initial call on Hold before they can respond to you. They
cannot just speak toward their phone.
You can use other options when you are trying to get through. Use
Call Waiting (page 25) to wait in line without hanging up. Or, you can
leave a Callback request for a return call (page 26). If you want, send
your coworker a Message Waiting indication (page 68) or a Voice
Mail message (page 125). You may also be able to Voice Over (page
129) to your busy co-worker while they stay on their initial call.
1.
To send Off Hook
Signals to an
OR
extension busy on a
handset call:
(Off Hook Signaling).
If you hear ringback tone, dial 1 to
have your call voice-announce (and
visa-versa).
1.
1.
+
.
To have Off Hook
Signals ring your
extension:
To answer an Off Hook Signal at
your extension, you must first hang up
your current call or place it on Hold.
+
.
To have Off Hook
Signals voice-
announce at your
extension:
If your extension has Handsfree, you
can answer an Off Hook Signal by just
speaking toward your phone.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Calling
Use your One-Touch Keys for one button access to co-workers, out-
side lines and selected system features. You'll find this a great time
saver when calling the clients and co-workers you talk to most often.
Instead of dialing the codes, just press the One-Touch Key.
Your One-Touch Keys give you:
G
Direct Station Selection - One button access to your co-worker's
extensions.
G
Personal Speed Dial (Outside Calling) - One button access to
outside lines, line groups and telephone numbers. (You can also
have Personal Speed Dial if your phone doesn't have One-Touch
Keys - see page 81).
G
Abbreviated Dialing - One button access to Common and Group
Abbreviated Dialing bins.
Feature Codes - One button access to Feature Codes (e.g., 2 for
G
Callback).
G
Chain Dialing - Linking two or more One-Touch Keys for lengthy
dialing scenarios.
One-Touch Calling is the first level of operation on the One-Touch
Keys. In other words, One-Touch Calling occurs when you just press
the One-Touch Key. There is a second level of One-Touch Key func-
tions called One-Touch Serial Operation (page 82).You access these
functions by first pressing the One-Touch Serial Operations key.
1.
+
+
you
To program a One-
Touch Key for DSS
(extension) calling:
want to program.
2. Dial extension number you want
assigned to that key +
.
3. Optional for Display Phones: Enter a
name for the One-Touch key (see Name
Storing on page 72) +
to hang up.
.
3.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Calling
1.
2.
+
+
you
To program a One-
Touch Key for outside
calling (Personal
want to program.
for Trunk Group Access code.
OR
Speed Dial):
+ trunk number (01-192) for
a specific trunk.
OR
+ Trunk Group number
(e.g., 1) for a Trunk Group.
3. Dial the number you want to call +
To enter a pause, press
.
.
4. Optional for Display Phones: Enter a
name for the One-Touch key (see Name
Storing on page 72) +
.
5.
1.
2.
to hang up.
+
+
you
To program a One-
Touch Key for
Abbreviated Dialing:
want to program.
for Common or
for Group Abbreviated Dialing.
3. Dial Abbreviated Dialing storage code
(e.g., 001) +
.
4. Optional for Display Phones: Enter a
name for the One-Touch key (see Name
Storing on page 72) +
to hang up.
.
5.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Calling
1.
+
+
you
To assign a Feature
Code to a One-Touch
Key:
want to program.
2. Dial Feature Code you want to store.
For example, store 2 to make a call-
back key. Refer to the features in this
handbook for the appropriate Service
Codes.
3.
1.
to hang up.
To use a One-Touch
Key:
If you press a line key before pressing
a One-Touch Key for outside calling,
the system automatically removes any
stored trunk codes.
1.
To chain the functions
of two One-Touch
Keys:
Let the stored number dial out.
2. Press another
.
The stored digits dial out.
1.
2.
+
.
To check the function
of a One-Touch Key:
The stored function displays. Repeat
this step to check additional keys. If you
cannot see the entire number stored,
dial
.
.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Calling
Using Personal Speed Dial without One-Touch Keys
1.
+
.
To program a Personal
Speed Dial number if
your phone doesn't
have One-Touch Keys:
2. Dial a Personal Speed Dial bin number
(1-9 or 0).
Bins 1-9 correspond to One-Touch
Keys 1-9. Bin 0 corresponds to key 10.
3. Dial outside number you want to call.
The bin should contain a trunk
access code: 9, #9 + Trunk number or
804 + Trunk Group number. To enter a
pause, press MIC.
4.
1.
to hang up.
+
.
To dial a Personal
Speed Dial number if
your phone doesn't
have One-Touch Keys:
2. Dial a Personal Speed Dial bin number
(1-9 or 0).
The stored number dials out.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Serial Operation
Do you frequently dial a long sequence of codes and numbers for the
same operation? One-Touch Serial Operation can simplify your phone
by letting you store the entire sequence of steps under a One-Touch
Key. This includes dial pad digits, feature keys, function keys and
even other One-Touch Keys. For example, before you leave the office
at night you can have One-Touch Serial Operation:
G
Place the system in the Night Mode.
Call Forward your phone to Voice Mail.
Ring your home to let them know you are coming.
G
G
One-Touch Serial Operation is the second level of operation for One-
Touch Keys. You must press the Serial Operations function key before
the One-Touch Key. The first level of operation is One-Touch Calling
(page 78). This occurs when you just press the One-Touch Key.
1.
+
+
key
To store a series of
operations in a One-
Touch Key:
you want to program.
2. Enter the sequence of operations you
want to store (up to 24 entries).
You can store the following operations:
Feature Codes
0-9, # and *
(for pause)
82
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Serial Operation
If you store a One-Touch Key as part
of a Serial Operation, the system stores
the first level (One-Touch) function.
To store a series of
operations in a One-
Touch Key:
3.
4.
(Serial Operations).
to hang up.
1.
1.
(Serial Operation) +
.
To dial using One-
Touch Serial
Operation:
+
(twice).
To check the stored
Serial Operation:
The stored Serial Operation displays.
To check another key, press it twice
before going to step 2.
If the stored number does not fit in
the display, dial * to see the entire
number.
2.
1.
+
+
you
To clear a One-Touch
Serial Operation:
want to clear.
2.
3.
(Serial Operations).
to hang up.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Calls, Answering
There are many types of outside calls that you can answer from your
phone. You can tell a lot about the call coming in by listening for ring-
ing, watching your phone's keys and checking the display (if you have
one). Also use the chart below as a guide. Ask your Communications
Manager about the different types of calls you are expected to answer.
You may have line and loop keys on your phone. A line key is dedi-
cated to a particular outside line. When you press the line key to
answer a call, you always get the same line. A loop key works just like
a line key, except that it is for any line in a preset line group. When
you press a loop key to answer a call, you get whichever line in the
group happens to be ringing.
For this type of call...
You hear...
And see...
flashing slowly
Outside Call that rings Two quick rings -
your phone
repeated
(red)
(If you have a line
key for it)
flashing slowly
flashing slowly
Direct Inward Line1
(If you have a line
key for it)
Two quick rings -
repeated
(green)
flashing slowly
Outside call or DIL
that rings your phone repeated
(If you don't have a
Two quick rings -
flashing slowly
flashing slowly
line key for it)
Outside call that just No Ringing
flashes a line key
(red)
without ringing
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Calls, Answering
For this type of call...
You hear...
And see...
flashing slowly
(green)
Transferred Call
(If you have a line
key for it)
Two quick rings -
repeated
flashing fast
flashing fast
Transferred Call
(If you don't have a
line key for it)
Two quick rings -
repeated
1These calls initially ring only at your phone.
1.
or
.
To answer an outside
call:
Depending on how your phone is set
up, you may answer the call automati-
cally. You phone's Line Preference
(page 62) determines what happens
when you lift the handset or press SPK
to answer a call.
2. Press flashing
or
.
You may be able to dial #0 at night to
pick up calls not ringing your phone.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Calls, Placing
Your phone offers you several ways to place outside calls. You can:
G
Press a line key for one-button access to a specific line.
Press a loop key for one-button access to the first available line in
G
a line group.
Dial a code to select a specific line.
Dial a code to select the first available line in a line group.
Dial 9 to use Trunk Group Routing or Automatic Route Selection
G
G
G
(ARS).
The method you use depends on how your system and your phone are
set up. For example, if you should use only ARS for outgoing calls,
don't press line keys or dial up lines and line groups. On the other
hand, if your office is set up like a "key system", you and your co-
workers will have line keys for the same outside lines. Your
Communications Manager can tell you which methods you should use
for placing outside calls.
1.
.
To place an outside
call using a line key:
You may have to press SPK or lift the
handset before pressing the line key.
The line key lights (green).
2. Listen for dial tone.
3. Dial number.
1.
+
+ Line number (01-
To dial a code to
select a specific line:
192).
2. Dial number.
Check with your Communications
Manager to see which lines you can use.
1.
+
+ Line group
To dial a code to
select a line group:
number.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Calls, Placing
Your line group numbers are 1-9, 01-
99 or 001-128. Ask your Communications
Manager.
To dial a code to a
select line group
(Cont’d)
2. Dial number.
1.
+
.
To use Trunk Group
Routing or ARS:
The system automatically routes your
call using ARS or Trunk Group Routing
- whichever is installed.
Converting from Pulse to Tone Dialing
If your company is in a Dial Pulse area, you may need to change the
dialing mode of your phone to tone (DTMF) after you place your ini-
tial call. This allows you to use dial-up services like electronic bank-
ing or a client's Voice Mail.
1. Place outside call normally.
To change your dial-
ing mode to DTMF:
Your call dials out as Dial Pulse.
2.
.
The next digits you dial go out as
DTMF.
Instead of dialing #, the system may
automatically convert to DTMF 10 sec-
onds after you dial the last digit of your
outside call.
Are You Behind a PBX?
Your telephone system may be connected to a Private Branch
Exchange (PBX) rather than to the telephone company's lines. This
means that when you get dial tone on an outside line, you are really
getting dial tone from the PBX. This may affect the way you place
outside calls. For example:
G
After you press a line key, you may have to dial an additional
access code (e.g., 9) before you can dial your outside number.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Calls, Placing
G
The PBX may restrict you from placing certain types of calls.
If you use Automatic Route Selection, your telephone system may
G
automatically insert whatever codes the PBX requires. For exam-
ple, when you dial 9 926 5400 for an outside call, your system may
send 9 9 926 5400 to the PBX.
G
You may be able to Transfer to and Conference with other systems
connected to the same PBX.
Ask your Communication's Manager if you are behind a PBX.
You May Have a Private Line
A Private Line is simply a line on your phone that nobody else in the
system can use. Only you can place and answer calls on your Private
Line. Your Communications Manager can tell you if you have a
Private Line.
If You Hear a Warning Tone
While on an outside call, you may hear occasional beeps through your
speaker or handset. These tones remind you that you have been on the
call a long time.
How Prime Line Works
If you have Prime Line, you can place or answer a call on a specific
line just by lifting the handset. With Outgoing Prime Line Preference,
you get dial tone on your Prime Line when you lift the handset. This
happens even if another call is ringing in. If you usually need to place
calls, Outgoing Prime Line Preference may help you.
With Incoming Prime Line Preference, lifting the handset answers a
ringing call. If you want easy answering of incoming calls, Incoming
Prime Line Preference may be for you.
If Prime Line sounds helpful to you, your Communications Manager
may be able to set it up.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Calls, Placing
Did Your Call Go Through?
If you dial certain calls and you find that they do not go through, ask
your Communications Manager the following questions:
G
Is my telephone Toll Restricted? If it is, what numbers am I pre-
vented from dialing?
Can I override Toll Restriction? If so, what is my override code?
G
1.
2.
+
+ Password.
If you need to over-
ride Toll Restriction:
+ Dial number without restriction.
G
G
Do I need to enter Account Codes (page 14) for outside calls?
Does my telephone use Automatic Route Selection? If it does, are
there any numbers that I cannot dial?
If my phone uses Automatic Route Selection, will I ever be
requested to enter an Authorization Code before the call can go
through? If so, what are my Authorization Codes?
G
1.
+
.
If you need to enter
an ARS Authorization
Code:
You hear ARS dial tone.
2. Dial the outside telephone number.
You hear a second ARS dial tone.
3. Enter the ARS Authorization Code.
Ask your Communications Manager
for your ARS Authorization Codes.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Paging
Internal Paging
Need to locate a co-worker or make an announcement? Use Internal
Paging. Your system can have All Call Internal Paging and, depending
on your system, up to 64 zones of Internal Paging. When you make an
All Call Paging announcement, your voice broadcasts to all extensions
set to receive All Call Paging. When you make a Zone Paging
announcement, your voice broadcasts to all the idle extensions in the
zone you called.
1.
(Internal Paging).
To make an Internal
Page:
OR
+
+ Zone.
Internal Paging zones are 0-9 or 00-
64 (0 and 00 are All Call Internal
Paging).
2. Make announcement +
to hang up.
External Paging
If you have your own external speaker system installed, you may be
able to use it for External Paging. This is particularly helpful in large
or noisy areas where the Internal Paging speakers in the telephones are
not loud enough. Your system can have All Call External Paging and
up to 8 zones of External Zone Paging.
1.
(External Paging).
To make an External
Page:
OR
+
+ Zone.
External Paging zones are 0-8, where
0 is All Call External Paging.
2. Make announcement +
to hang up.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Paging
Combined Paging
Use Combined Paging when you want to simultaneously Page into an
internal and corresponding external zone. For example, you can Page
your company's warehouse and outside loading dock at the same time.
Combined Paging is available for Paging zones 1-8 and All Call.
1.
+
+ Combined Paging
To make a Combined
Page:
zone.
OR
(All Call External Page).
Combined Paging zones are 1-8 (for
internal/external zones 1-8) or 0 (for
internal/external All Call).
2. Make Announcement.
3. to hang up.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Park
Have a call for a co-worker and can't find them? Put their call in a
waiting state called Park so they can pick it up. After you Park the
call, Page the co-worker you want to receive the call and hang up.
When your co-worker hears the Page, they dial the orbit or press a
Park key to pick up the call.
There are two types of Park: System and Personal. Use System Park
when you want to have the call wait in a system orbit. (There can be up
to 64 system orbits, depending on your system) Personal Park allows
you to Park a call at your extension so a co-worker can pick it up.
1. Do not hang up.
To Park a call in a
system orbit:
2.
(Park).
OR
+
+ Park Orbit.
Park Orbits are 1-64. If you hear
busy, the orbit is busy. Try another
orbit.
3. Page your co-worker to pick up the call.
4.
to hang up.
If not picked up, the call will recall to
you.
You can only pick up a call parked by a
member of your own Park group.
To pick up a parked
call from a system
orbit:
1.
+
(Park).
OR
+
+ Park Orbit.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Park
1. Do not hang up.
To Park a call at your
extension:
2.
+
.
3. Page your co-worker to pick up the call.
4.
to hang up.
If not picked up, the call will recall
to you.
If parked at your extension:
To pick up a call
parked at an exten-
sion (yours or a co-
worker's):
1.
+
.
OR
If parked at a co-worker's extension:
1.
+
+ Co-worker's
extension.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Park and Page (VAU)
This feature requires a Voice Announce Unit (VAU).
G
When you are away from your phone, Park and Page can let you know
when you have a call waiting to be answered. To enable Park and
Page, you record a Personal Greeting along with an additional Paging
announcement. Your callers hear your Personal Greeting and automati-
cally wait at your phone. The system then broadcasts your prerecorded
Paging announcement. You can go to any co-worker's phone and pick
up your waiting call.
For example, you could record a Personal Greeting that says, "Hello. I
am away from my phone right now but please hold on while I am
automatically paged." Your Paging announcement could say, "(your
name), you have a call waiting on your line." Your caller hears your
Personal Greeting - and you hear the Paging broadcast.
1.
+
OR
.
To have the system
Page you when you
have a call:
1.
2.
(Call Forward to Device).
+ When you hear, "Please start
recording", record your Personal
Greeting.
If you already have Park and Page or
Personal Greeting set up, you can dial:
7 to re-record
5 to listen (then # to listen again)
3 to erase (then optionally HOLD to
cancel the erase)
3.
.
4. When you hear, "Please start recording",
record your Page.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Park and Page (VAU)
5.
+ Dial Page Zone that should
To have the system
Page you when you
have a call
broadcast your announcement.
For example, for Internal Zone 1 dial
801 + 1. Or, for Combined Paging Zone
1, dial *1 + 1.
(Cont’d):
6. Dial Park and Page type:
2 = All calls
3 = Outside calls only
7.
to hang up when you are done.
Your DND or Call Forwarding
(Device) Programmable Function Key
flashes when Call Forwarding is acti-
vated.
1.
+
+ Co-worker's
To pickup up your
Park and Page:
extension.
1.
2.
+
+
.
To cancel your Park
and Page:
to hang up when you are done.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Greeting
Personal Greeting requires a Voice Announce Unit (VAU).
G
Use Personal Greeting to forward your calls and automatically play a
recorded message to your callers. This lets you add a personal touch to
your Call Forwards. For example, you can record, "Hi, this is (your
name). I'll be out of the office today. In my absence, Mary Jones can
answer all your questions. Please hold on for Mary." Your callers hear
this message and then are forwarded to Mary Jones' phone.
1.
+
OR
.
To activate Personal
Greeting for your
phone:
1.
2.
(Call Forward to Device).
+ When you hear, "Please start
recording," record your Personal
Greeting.
If you already have Personal
Greeting or Park and Page set up, you
can dial:
7 to re-record
5 to listen (then # to listen again)
3 to erase (then optionally HOLD to
cancel the erase)
3.
+ Personal Greeting condition:
2 = Busy or not answered
4 = Immediate
6 = Not answered
3 = Cancel
4. Dial the destination to receive your calls.
The destination can be:
G
A co-worker's extension.
G
Your Voice Mailbox (by dialing the
Voice Mail master number).
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal Greeting
G
G
Off-premise via Common
Abbreviated Dialing (by entering
#2 + bin).
Greeting without forwarding so caller
hears busy (by entering your exten-
sion number).
To activate Personal
Greeting for your
phone (Cont’d):
You cannot forward to a Department
Group pilot number.
5. Dial Personal Greeting type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
6.
to hang up.
Your DND or Call Forwarding
(Device) Programmable Function
Key flashes when Call Forwarding is
activated.
1.
2.
+
+
.
To cancel your
Personal Greeting:
to hang up when you are done.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Function Keys
Customize your phone by storing features or outside lines under your
Programmable Function Keys. For example, to return a Message
Waiting, just press your Message Waiting function key instead of
dialing
.
1.
+
+
you
To program a function
key:
want to program.
2. Select key code from chart below.
1.
+
you want to check.
To check a stored
function:
The programmed function displays.
Programmable Function Key Codes
Use key
For this feature code
When you are
Or dial
Abbreviated Dialing 1037 Dialing a stored Common
Abbreviated Dialing number
#2 + bin
#4 + bin
-
1038 Dialing a stored Group
Abbreviated Dialing number
Barge In
1019 Barging In on a co-worker's
conversation
Call Forwarding
Call Forwarding
Off-Premise
1080 Forwarding your calls (station)
1081 Forwarding your calls (device)
*2
*4
Call Forwarding / Do 1022 Overriding an extension's Call
Not Disturb Override Forwarding or Do Not Disturb
Callback / Camp On / 1020 Leaving a Callback request at a
Trunk Queuing busy extension, Camping On to
-
2
a busy extension, or Queuing for
a busy trunk
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Function Keys
Programmable Function Key Codes
Use key
For this feature
code
When you are
Or dial
Central Office Calls 0001- Pressing a line key to place or
#9
0192 answer a trunk call (where trunks
can range from 0001-0192)
1078 + Pressing a loop key to place or
Type + answer a call. Type = 0
Group (Incoming), 1 (Outgoing) or 2
(Both ways), Group = 000 (All
groups in or ARS out) or 001-128
(Trunk Group)
-
Conference
1016 Setting up a Conference or a
Meet Me Conference
#1
-
Conference, Voice Call 1017 Setting up a Voice Call
Conference
Data Communications 1029 Placing a data call
1045 Using your PC for Telemarketing
Dial
-
-
Department Step Calling 1021 Step Calling through a Department
Group for an idle member
#
Group Call Pickup
1007 Answering a call ringing another *#
phone in your Pickup Group
1008 Answering a call ringing a phone 869
in another Pickup Group-if you
don't know the group number
1009 + Answering a call ringing a phone 868
Group in a specific Pickup Group
Number
Hotline
1058 + Placing a call to your Hotline
-
ext.
partner
number
Headset Operation
1028 Enabling or disabling Headset
834
Operation
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Function Keys
Programmable Function Key Codes
Use key
For this feature
code
When you are
Or dial
Hold
1043 Putting a call on System Hold
(if your phone's Hold key is
reassigned)
-
1044 Putting a call on Exclusive Hold
-
Meet Me Conference 1010 Joining a Meet Me Conference 863
and Meet Me Paging
Memo Dial
or Page
1015 Storing, using or checking a
Memo Dial number
-
Message Waiting
1023 Leaving or answering a Message 0 or
Waiting
*0
-
-
Microphone Cutoff
Multiple Directory
Numbers
1026 Using Microphone Cutoff
1036 + Placing a call or covering your
ext.
virtual (phantom) extension / Call
Coverage
Night Service
1039 + Activating the Day Mode
pswd
818 +
pswd
(0000)
+ 0
1040 + Activating the Night Mode
pswd
818 +
pswd
(0000)
+ 1
1041 + Activating the Midnight Mode 818 +
pswd
pswd
(0000)
+ 2
1042 + Activating the Rest Mode
pswd
818 +
pswd
(0000)
+ 3
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Function Keys
Programmable Function Key Codes
Use key
For this feature
code
When you are
Or dial
Night Service
(cont’d)
1090 + Activating the Day 2 Mode
pswd
818 +
pswd
(0000)
+ 4
1091 + Activating the Night 2 Mode
pswd
818 +
pswd
(0000)
+ 5
1092 + Activating the Midnight 2 Mode 818 +
pswd
pswd
(0000)
+ 6
1093 + Activating the Rest 2 Mode
pswd
818 +
pswd
(0000)
+ 7
Off Hook Signaling
One-Touch Serial
Operation
1018 Signaling a busy extension
1034 Storing, using or clearing a One- 852
7
Touch Serial Operation
Paging, External
1004 + Making an external zone page
zone
1005 Making a Combined All Call
page
803
+ zone
803
+ 0
Paging, Internal
Park
1006 + Broadcasting to an Internal
zone Paging Zone
1076 Broadcasting an Internal All
Call Page
1033 + Placing a call into or retrieving
orbit a call from a Park Orbit
(1-9 or
801
+ zone
801 +
0 or 00
#6
(Park)
*6
01-64)
(Pickup)
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Function Keys
Programmable Function Key Codes
Use key
For this feature
code
When you are
Or dial
Repeat Redial
1075 Activating Repeat Redial
DIAL +
LND
-
Reverse Voice Over 1056 + Initiating Reverse Voice Over
dest. ext.
Room Monitor
1025 Activating Room Monitor
-
-
Save Number Dialed 1014 Saving, redialing or checking a
saved number
Secretary Call (Buzzer) 1031 + Calling your secretary (using the
-
-
sec. ext. buzzer)
Secretary Call Pickup 1032 + Activating Secretary Call Pickup
boss ext.
Selectable Display
Messaging
1081 Forwarding your calls (device)
*4
Serial Call
Transfer
1035 Placing a Serial Call to a co-worker -
1077 Transferring a call (if CONF[TRF] -
is not set for Transfer)
Trunk Group Routing 1011 Accessing a trunk using Trunk
-
804
2
Group Routing
Trunk Groups
Trunk Queuing
1012 + Accessing a Trunk Group
group (Groups are 1-9, 01-99 or 001-128)
1020 Camping On or Queuing for a
trunk
VAU Park and
Page/Personal Greeting
Voice Mail
1081 Forwarding your calls (device)
*4
1059 + Calling Voice Mail or leaving *8 or 8
ext. a message
1060 Using Voice Mail Record
1057 Initiating or responding to Voice
Over
-
6
Voice Over
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Redial
Trying to get in touch with a customer and their phone is always busy
or unanswered? Don't keep redialing it manually - have Repeat Redial
do it for you. Repeat Redial will retry your call automatically (up to
three times) so you can go back to work.
You can also quickly redial your last call using Last Number Redial
(page 61) and Save Number Dialed (page 107).
1. Place outside call.
To use Repeat Redial:
Listen for busy or no answer.
2.
+
.
OR
(Repeat Redial).
Your Repeat Redial key flashes while
you wait for the system to redial.
3.
4.
to hang up.
Your phone periodically redials the
call.
or
answers.
when party you call
1. Do not lift handset.
To cancel Repeat
Redial:
2.
+
.
OR
(Repeat Redial).
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Reverse Voice Over
While you are busy on a handset call, Reverse Voice Over allows you
to make a private Intercom call to an idle co-worker. Just press your
Reverse Voice Over function key to call your co-worker. Your initial
caller cannot hear your voice, but you can keep talking to your co-
worker as long as you hold down your key.
Reverse Voice Over is great, for example, if you're busy on the phone
and you need an associate to get you a file. While your caller is talking:
G
Press the Reverse Voice Over key.
G
Request the file.
G
Return to the call without the caller even knowing you were gone.
If you're not busy on the phone, your Reverse Voice Over key works the
same as a Hotline key. Just press the key to call the assigned co-worker.
The Reverse Voice Over key even shows you the status of your co-worker:
When the key is . . .
Off
Your co-worker's phone is . . .
Idle
Slow Flash
Fast Flash
Busy or has a call ringing
In Do Not Disturb
When You're On a Call
1. Press and hold
(Reverse Voice
To place a Reverse
Voice Over Call:
Over).
Your Reverse Voice Over key lights
(green).
1. Release
(Reverse Voice Over).
To return to your
initial caller:
When Your Phone is Idle
1.
(Reverse Voice Over).
You can optionally lift the handset for
privacy.
To place a call to your
Reverse Voice Over
destination:
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Ringdown
Call a co-worker or outside party by just lifting the handset on your
telephone. The call goes through automatically - there is no need to
dial digits or lift the handset. There are two types of Ringdown:
Ringdown Extension and External Hotline. With Ringdown Extension,
you reach another extension (typically a lobby or service phone) when
you lift the handset. If your phone has External Hotline, your phone
automatically dials a specified Common Abbreviated Dialing number
instead. If you want either of these Ringdown options on your phone,
talk to your Communications Manager.
When a user lifts the handset on a Ringdown Extension, the ringdown
occurs after an interval that is set in system programming. Try to mon-
itor this operation. If the interval is too long, unauthorized users may
have time to call your co-workers or use system features. (External
Hotline always occurs as soon as you lift the handset.)
1.
To use Ringdown:
1. Do not lift handset.
To bypass Ringdown
(for Ringdown
2.
+ Place Intercom or outside call.
OR
Extension only):
Press
OR
for outside call +
+ Place Intercom call before
Ringdown goes through.
1. Speak toward your phone if the call
To answer a call if you
are a Ringdown
Destination:
voice-announces.
OR
if call rings.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Room Monitor
Use Room Monitor when you want to listen to the sounds in another
work area. For example, Room Monitor could let you listen to the
sounds in the warehouse when it's left unattended. You just set up a
Room Monitor with a phone in the warehouse area.
You must activate Room Monitor at your phone and at the phone you
want to monitor. You can only monitor one phone at a time. In addi-
tion, Room Monitor is for listening only (i.e., you cannot talk to the
monitored extension).
1. Do not lift handset or press
.
To activate Room
Monitor (at your own
phone):
2.
(Room Monitor) + Extension
you want to monitor.
The Room Monitor key flashes.
1. Do not lift handset or press
.
To activate Room
Monitor (at the phone
you want to monitor):
2.
(Room Monitor) + Your own
extension number.
The Room Monitor key flashes.
1.
(Room Monitor).
The Room Monitor key at both
phones goes out.
To cancel Room
Monitor (at either
phone):
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Save Number Dialed
While on an outside call, you can save the number you just dialed and
easily dial it later. This lets you quickly redial a busy or unanswered
number without manually dialing any digits. Your system remembers
your saved number until you save a new one in its place.
You can also quickly redial your last call using Last Number Redial
(page 61) and Repeat Redial (page 103).
Use the following procedure before
hanging up.
To save the outside
number you just
dialed:
1.
(Save Number Dialed).
The number you save can be up to 24
digits long, using 0-9, # and *.
1.
+
(Save Number Dialed).
To redial a Saved
Number:
This selects a specific line for the
call. The stored number dials out.
OR
1.
2.
.
OR
(Save Number Dialed).
Save Number Dialed selects a line
from the same group as your original
call. The stored number dials out.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Save Number Dialed
1.
(Save Number Dialed).
The stored number displays for six
seconds. The stored number dials out if
you:
To see the number
you saved:
- Lift the handset
- Press an idle line key
- Press an idle CALL key
- Press SPK
2.
1.
+
+
to hang
To clear your saved
number:
up.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Secretary Call
Secretary Call Buzzer lets you alert a co-worker without disturbing
their work. They can then call you on the Intercom when it's conve-
nient. To use this feature, both you and your co-worker must have
Secretary Call Buzzer keys. When you press your buzzer key, your co-
worker gets a beep and their buzzer key starts to flash. Your own
buzzer key lights. The buzzer keys continue to indicate until you or
your co-worker cancels the feature.
You might want to use this feature, for example, if you need to talk to
an associate who is having a meeting in their office. After being alert-
ed, your associate can call you back when they're available.
You can have Secretary Call Buzzer keys for many extensions.
1. Do not lift the handset.
To buzz your
2.
(Secretary Call Buzzer).
secretary or boss:
Your boss or secretary hears a splash
tone. Your buzzer key lights steadily.
Your boss or secretary's buzzer key
flashes fast.
1. Do not lift the handset.
To check to see who
left you a Secretary
Call:
2.
3.
+
(Secretary Call Buzzer).
1. Place an Intercom call to the extension
To answer your
Secretary Call
indication:
that called you.
This does not automatically clear the
Secretary Call indication.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Secretary Call
1. Press lit
(Secretary Call Buzzer).
To cancel a Secretary
Call you left at
Both the boss and secretary buzzer
keys go out.
another extension:
1. Do not lift your handset.
To cancel a Secretary
Call left at your
extension:
2. Press flashing
Buzzer).
(Secretary Call
Both the boss and secretary buzzer
keys go out.
Secretary Call Pickup
Press your Secretary Call Pickup key to have calls intended for a co-
worker go to you instead. This gives you a simplified type of Call
Forwarding for an associate with whom you work closely. For exam-
ple, if you and a co-worker handle all your company's service calls,
Secretary Call Pickup lets you easily answer your co-worker's calls if
they leave their desk.
You can have Secretary Call Pickup keys for many extensions.
1.
(Secretary Call Pickup).
You hear a beep and your key lights.
To activate Secretary
Call Pickup:
1. Press lit
(Secretary Call Pickup).
You hear a beep and your key goes
out.
To cancel Secretary
Call Pickup:
1.
2.
+
(Secretary Call Pickup).
To check the
Secretary Call key
assignment:
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Selectable Display Messages
Activate a Selectable Display Message when you leave your desk. A
co-worker calling your extension will see the message you activated
on their telephone's display. For example, when you leave for lunch,
activate the "OUT FOR LUNCH BACK AT" message and enter the
time when you will return. Your callers will know where you have
gone and when you will be back.
The chart below shows the standard Selectable Display Messages.
You'll notice that you can add additional information to messages 1-8
and 10. Your callers will appreciate this information since they will
know where to call you or when you will return.
No.
Message
Appended with . . .
1
IN MEETING UNTIL
Time (when meeting
done)
2
3
4
5
OUT UNTIL
Time (when returning)
8 digits (phone number)
8 digits (phone number)
8 digits
OUT-PLEASE CALL
PLEASE CALL ME ON
BUSY CALL AFTER
6
7
8
OUT FOR LUNCH BACK AT Time (when returning)
BUSINESS TRIP UNTIL
BUSINESS TRIP CALL
GONE FOR THE DAY
ON VACATION UNTIL
MESSAGE 11-20
Date (when returning)
8 digits (where reached)
9
10
11-20
Date (when returning)
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Selectable Display Messages
1.
+
.
To select a message:
OR
(Call Forward to Device).
2.
+ Message number (01-20).
Use
and
to scroll
through the messages.
3. (Optional for messages 1-8 and 10) Dial
the digits you want to append to the
message.
You can append messages 1-8 and 10
with digits (e.g., the time when you will
be back). You enter the time in 24-hour
format, but it displays in 12-hour format.
4.
1.
to select message and hang up (if
you dialed *4 in step 1).
+
.
To cancel a message:
OR
(Call Forward to Device).
2.
3.
to hang up (if you dialed
in step 1).
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Selectable Ring Tones
If you work in an area where your extension is close to others, you
may want to customize the way calls ring your phone. This will help
you differentiate calls to your extension from calls to other extensions.
1.
2.
+
.
To change your
extension's incoming
ring tones:
to set Intercom ring or
outside line ring.
to set
Transferred calls use the Intercom
ring tone you select.
3. Dial code for the ring pattern you want:
1 = High pitch
2 = Medium pitch
3 = Low pitch
4.
to hang up.
1.
2.
+
.
To listen to the
incoming ring
choices:
to listen to Intercom ring or
to listen to outside line ring.
For outside line ring, enter the tone
you want to listen, and for the 384i
only, this is followed by the Tenant
Group (1-4).
3. Dial code for the ring pattern you want
to hear:
1 = High pitch
2 = Medium pitch
3 = Low pitch
4.
to hang up.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial Call
Do you have a caller that wants to talk to a co-worker, but needs to
consult with you when they are done? If so, use Serial Call. When you
Transfer a call with Serial Call, it automatically returns to you as soon
as the conversation with the Transfer destination ends. Assume for a
moment that you are a Customer Service Representative talking to a
customer that needs technical help. Since you want to be sure that the
problem is solved, you need to talk to the customer when they are
done with Tech Service. With Serial Call, you can send the call to
your technical department and be assured that it will come back to you
when they are through.
For other Transfer options, refer to the Transfer feature on page 118.
1. Place or answer outside call.
To place a Serial Call:
2.
+ Co-worker's extension number.
Your co-worker must lift the handset
to respond to your announcement.
3.
(Serial Call) but do not hang up.
When your co-worker hangs up the
call, it returns as a live Transfer back to
you.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Tandem Trunking
Tandem Trunking lets you set up a Conference with two outside
callers and then drop out of the call - leaving the callers talking in an
Unsupervised Conference. Once you drop out you are not part of the
conversation. The Unsupervised Conference continues until either out-
side caller hangs up. Optionally, you can rejoin the Conference and
end it whenever you choose.
If you are a dispatcher for outside service people, for example, you
can use Tandem Trunking to put two of your service people in touch:
G
Answer a call from one service person.
Place a call to the second service person.
Set up the line-to-line Conference.
Drop out of the call.
G
G
G
There are two methods for setting up Tandem Trunking. Your
Communications Manager can tell you which method is available to you.
Method A
1. Set up first outside call.
This can be a call you placed or
answered.
To make a line-to-line
Conference:
2. Press
.
3. Set up second outside call.
4. Press twice.
You now have a Conference between
you and the two outside parties.
5.
(Transfer).
OR
+
.
You drop out of the call and leave the
outside callers talking to each other.
The line keys for the calls blink
(green) as long as the Unsupervised
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Tandem Trunking
Conference continues. If one of your out-
side callers hangs up, the Conference ends.
To make a line-to-line
Conference (Cont’d):
1. Flashing
.
To return to the
tandem call:
You must have a line key to be able to
rejoin the Conference. Press Transfer
key or HOLD + #8 to reinstate the
Conference.
If one of the callers hangs up, you
continue talking to the remaining caller.
1. Press flashing
Conference.
to return to the
To end the line-to-line
Conference:
2.
to hang up.
Method B (Requires a
[Transfer] key)
1. Set up first outside call.
To make a line-to-line
Conference:
This can be a call you placed or
answered.
2. Press
3. Set up second outside call.
4. Press (Transfer).
.
You drop out of the call and leave the
outside callers talking to each other.
The line keys light steadily for both
outside parties.
1. Press
+
.
To end the line-to-line
Conference:
This immediately disconnects the
Conference.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Time and Date
You see the Time and Date on your telephone's display when it is idle.
If you notice that the Time and Date are incorrect, you may be able to
change them. Use some caution, however, since the Time and Date
affect how your system routes calls and handles other features.
1.
+
.
To set the Time and
Date:
2. Dial the Time and Date password.
The password is normally 0000.
3. Dial two digits for the year (e.g., 92).
4. Dial two digits for the month (01-12).
5. Dial two digits for the day (01-31).
6. Dial the day of the week (0-6).
0=Sunday, 6=Saturday
7. Dial two digits for the hour (24 hour).
For example, 13=1:00 PM.
8. Dial two digits for the minutes (00-60).
You hear confirmation beeps.
9.
to hang up.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
Transfer lets you quickly send the call you are on to a co-worker. You
can Transfer both Intercom and outside calls. You can use the follow-
ing types of Transfer:
Screened Transfer
Announce the call to your co-worker
before hanging up. Use Screened
Transfer when you're not sure your
co-worker is in, or you think they
might not want the call.
Unscreened Transfer Transfer the call and hang up without
announcing it. This is the quickest
way to Transfer. Don't worry, the call
will ring back to you if your co-work-
er doesn't pick it up.
Extension (Department Send the call to a Department Group
Group) Transfer
instead of a co-worker's extension.
Any idle extension within the group
will get the call.
Transfer Without
Holding
A co-worker presses a busy line key
and waits for you to be done with the
caller. They automatically get the call
when you hang up. This is a fast way
to Transfer if you share an office and
you know who's on the line.
Meet Me Paging
Transfer
Transfer a call to a Page zone rather
than a co-worker's extension or
Department Group. Use Meet Me
Paging Transfer when you're not sure
where your co-worker is.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
If you want your transferred call to automatically come back to you
when your co-worker hangs up, use Serial Call (page 114).
Transferring Outside Calls
1.
To Transfer a call to a
co-worker's
You hear Transfer dial tone.
2. Dial co-worker's extension number.
extension:
If the extension is busy or doesn't
answer, you can dial another extension
number or press the flashing line key to
return to the call. In addition, you may
be able to hang up and have the call
Camp-On.
3. Announce call and hang up.
If you don't have Automatic On Hook
Transfer, you must press CONF or your
Transfer Programmable Function Key
to Transfer the call.
If your co-worker doesn't want the
call, press the flashing line key to return
to the call.
If you don't want to screen the call,
hang up without making an announce-
ment.
1.
or
when a co-worker
To answer a call trans-
ferred to your
extension:
announces the call.
Transferring Without Holding
1.
(or
When original caller hangs up, you
connect.
) + Busy
.
To Transfer Without
Holding:
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
Transferring Intercom Calls
1.
+ Extension to receive your call.
If the extension is busy or doesn't
answer, you can dial another extension
number or press the flashing CALL key
to return to the call. In addition, you
may be able to hang up and have the
call Camp-On.
To Transfer your
Intercom Call:
2. Announce call and hang up.
If your co-worker doesn't want the
call, press the flashing CALL key to
return to it.
With Automatic On Hook Transfer
If your co-worker just speaks toward
their phone to answer, the transferred
Intercom call goes on hold at your
phone when you hang up.
Without Automatic On Hook
Transfer
You must press CONF or your
Transfer Key to Transfer the call.
If your co-worker just speaks toward
their phone to answer, the transferred
Intercom call disconnects when you
hang up.
To Transfer the call unscreened, press
CONF or your Transfer key and hang up
without making an announcement.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
Meet Me External Paging Transfer
1.
2.
To make a Meet Me
External Paging
Transfer:
+ External Paging code
(1-8 or 0 for All Call).
OR
(External Paging Zone).
OR
Combined Paging Zone code (
+ 0-8).
3. Announce Call.
4. When Paged party answers,
Transfer call to them.
to
1.
+
+ Announced
To join a Meet Me
External Paging
Transfer:
External Paging code (1-8 or 0 for All
Call).
You connect to the Paging party.
2. Stay on the line.
After the paging party hangs up, you
connect to the transferred call.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
Meet Me Internal Paging Transfer
1.
2.
To make a Meet Me
Internal Paging
Transfer:
+ Internal Paging code
(0-9 or 00-64).
OR
(Internal Paging Zone).
OR
Combined Paging Zone code (
+ 0-8).
3. Announce Call.
4. When Paged party answers,
Transfer call to them.
to
1.
+
(if your exten-
To join a Meet Me
Internal Paging
Transfer:
sion is in the zone called).
OR
+
+ Zone number
(0-9 or 00-64) (if your extension is not
in the zone called).
OR
+
(Internal Paging Zone
Answer) (if your extension is in the zone
called).
2. Stay on the line.
After the Paging party hangs up, you
connect to the transferred call.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Trunk Queuing and Camp On
When you try to place an outside call and hear busy tone from your
own phone system, you don't have to hang up and try again later. Use
Trunk Queuing to leave a request for the busy line to call you when
it's free. Just answer when Trunk Queuing rings you back and dial
your call again. If you prefer, use Trunk Camp On to wait for the busy
line without hanging up. With Trunk Camp On, you'll be able to use
the line the moment it's available.
1. Try to access outside line.
To queue for a busy
line:
Listen for busy tone.
2.
or
(Trunk Queuing).
3. Hang up to leave a Trunk Queuing
request.
OR
Wait without hanging up for the line to
become free.
1.
1.
or
.
To answer when Trunk
Queuing calls you
back:
+
+
to hang
To cancel a Trunk
Queuing request:
up.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Announce Unit (VAU)
This feature requires a Voice Announce Unit (VAU).
G
You can record the Voice Announce Unit (VAU) messages your sys-
tem uses for Automated Attendant greetings (page 16) and the General
Message (page 51). If your system has incoming 900 service, you can
also record the message that plays to those callers before automatic
billing occurs. You can record up to 16 separate messages, with a
combined recording time of 128 seconds.
1.
+
.
To record, listen to or
erase a VAU Message:
2. To record, dial
.
OR
To listen, dial
.
OR
To erase, dial
.
3. Dial the VAU message number (01-16)
you want to record, listen to or erase.
If recording, begin when you hear the
announcement, "Please start record-
ing." When done, press # to check what
you recorded.
When listening to a message, press #
to hear the message again.
If erasing, you can cancel erasing by
pressing HOLD before hanging up.
4.
to hang up.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail
This feature requires an optional NVM-Series Voice Mail system.
G
Tired and frustrated by missed calls, inaccurately written messages and
telephone tag? End these hassles with Integrated Voice Mail. Ask your
Communications Manager if you have this type of Voice Mail system
installed. Integrated Voice Mail enhances your phone by giving you:
Call Forwarding to To have your incoming calls
Voice Mail
automatically go to your mailbox, for-
ward your calls to Voice Mail. Your
callers can leave a message instead of
calling back later. You can have forward-
ing for all calls immediately, for unan-
swered calls, or for both unanswered
calls and when your extension is busy.
You can even have your phone emulate
an answering machine (called Personal
Answering Machine Emulation).
Leaving a Message When you call a co-worker and their
phone is unanswered, busy or in Do Not
Disturb, you can easily leave a message
in their mailbox. You don't have to call
back later.
Transferring to
Voice Mail
Transfer a call to your own or a
co-worker's mailbox. After the Transfer
goes through, your caller can leave a
message in the mailbox.
Conversation
Record
While on a call, press your Record key to
record the conversation in your mailbox.
Voice Mail stores the conversation like any
other voice message. You can then save,
edit or delete the recorded conversation.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail
Calling Your Mailbox
1.
(Voice Mail).
.
To call your mailbox:
OR
+
2. (Optional) After answer, dial security code.
Ask your Communications Manager
for your security code.
Leaving a Message
The extension you call can be busy, in DND
or unanswered.
To leave a message in
the mailbox of an
unanswered
1.
(Voice Mail).
extension:
OR
The Voice Mail system will prompt
you to leave a message.
Forwarding Calls to Your Mailbox
1.
+
OR
.
To activate or cancel
Call Forwarding:
1.
(Call Forward to Station).
2. Dial Call Forwarding condition:
2 = Busy or not answered
4 = Immediate
6 = Not answered
0 = Cancel
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail
3. Dial Voice Mail master number or press
Voice Mail key.
4. Dial Call Forwarding type:
To activate or cancel
Call Forwarding
(Cont’d):
2 = All calls
3 = Outside calls only
4 = Intercom calls only
5.
to hang up (if you dialed
in step 1).
Your DND or Call Forwarding
Programmable Function Key flashes
when Call Forwarding is activated.
Emulating a Personal Answering Machine
1.
1.
+
OR
.
To have your phone
emulate a personal
answering machine:
(Call Forward to Station).
To cancel, dial 0 and skip to step 3.
2.
+ Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
3.
to hang up (if you dialed
in step 1).
Your DND or Call Forwarding
(Station) Programmable Function Key
flashes when Call Forwarding is activated.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail
1. Do nothing and have Voice Mail auto-
matically record your caller's message.
OR
When Personal
Answering Machine
Emulation broadcasts
your caller's voice,
you can:
Lift the handset to listen to the message
in private.
OR
Press flashing
to intercept the call.
for a new call.
OR
Press idle
or
Transferring Calls to a Mailbox
1.
2.
To Transfer your
active call to a
mailbox:
(Voice Mail).
OR
Dial Voice Mail master number.
3. Number of mailbox to receive Transfer.
This number can be your mailbox num-
ber or a co-worker's mailbox number.
4.
1.
to hang up.
Recording Your Call
(Voice Mail Record).
To record your active
call in your mailbox:
You hear two beeps and your Record
key flashes. The beeps periodically
remind you that you are recording.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Over
If you need to get through to a co-worker busy on another call, press
your Voice Over key. After the Voice Over alert tone ends you can
talk to your busy associate. They can respond to you without their
initial caller hearing. Your co-worker can even switch back and forth
between you and their initial call. Your Voice Over key shows the
feature's status:
When the key is . . .
You are . . .
Off
Not using Voice Over
Listening to the interrupting party
Responding to the interrupting party
Flashing (red)
On (green)
For other ways to get through to a busy co-worker, see Call Waiting
(page 25), Callback (page 26), Off Hook Signaling (page 76),
Message Waiting (page 68) and Voice Mail (page 125).
You can only leave a Voice Over if you hear
two Off Hook Signaling tones.
To initiate a Voice
Over to a busy
co-worker:
1.
(Voice Over) or
.
You hear the Voice Over alert tone
and your Voice Over Key flashes. You
can talk to your co-worker after the
alert tone ends.
1. Press and hold flashing
Over).
(Voice
To answer a Voice
Over you receive:
The Voice Over key lights (green) and
then you can talk to the interrupting
party. Note that you cannot respond by
dialing the Voice Over feature code (6).
1. Release
(Voice Over).
To return to your
initial call:
You can press your Voice Over key
repeatedly to switch between your ini-
tial call and the interrupting party.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Prompting Messages
This feature requires a Voice Announce Unit (VAU).
G
The voice prompts tell you about your system, your extension and the
status of your call. The table below lists the most common voice
prompts you may hear. Ask your Communications Manager if you
need explanation of any other prompts.
Voice Prompting Messages
Message
This message will play when . . .
This is station
The date is
The time is
You dial 6 for your extension number.
You dial 3 for the date.
You dial 8 for the time.
. . . is busy, for callback
dial . . .
All lines are busy, for
callback dial
You call a busy extension.
You try to place an outside call when
all lines are busy.
Please do not disturb
You call a co-worker that has enabled
Do Not Disturb.
The lowest cost line is
busy, please wait for the
next one
The number you have
dialed is not in service
You have a message
ARS tries to reroute your call and the
least costly route is busy.
You dial a Service Code that Class of
Service prevents.
A co-worker has left you a Message
Waiting.
Your call cannot go
through, please call
the operator
Your calls have
been forwarded
Vacant number
Toll Restriction has denied your call.
You have enabled Call Forwarding.
You dial an extension that does not
exist.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Prompting Messages
Voice Prompting Messages
Message
This message will play when . . .
Is unavailable
An outside caller dials an extension
through the Automated Attendant and
the extension is busy.
Please start recording
Recording finished
You dial the code to record a VAU
message or Personal Greeting.
You are recording a VAU message or
Personal Greeting and have exceeded
the maximum allowed recording
length.
Audio file is full
There is no more space available in
the VAU for storing messages.
You are trying to record a VAU
message or Personal Greeting and the
recording already exists.
To listen dial
To erase dial
To re-record dial
1. Do not lift the handset or press
.
.
.
To check the system
time from your
extension:
2.
(for Time).
1. Do not lift the handset or press
To check the system
date from your
extension:
2.
(for Date).
1. Do not lift the handset or press
To check your
extension number:
2.
(for Number).
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Control
You can control the volume of incoming ringing, splash tone, Paging,
Background Music, Handsfree and your handset. Some telephones have
two separate volume controls: a slide switch on the left side for ringing and
tones, and volume buttons for Background Music, Paging, Handsfree and
the handset. Other telephones consolidate all adjustments into the volume
buttons. In either case, you can adjust these volumes anytime while on a
call or when your phone is idle. Set them for their most comfortable level.
1. Slide the control switch or
or
(if your phone doesn't have a
control switch).
To adjust the volume
of incoming ringing
and splash tone:
If you have an i-Series phone (P/N
927xx) you can press CHECK + Volume
up or Volume Down to show the volume
level.
1.
or
.
To adjust volume for
incoming Paging,
BGM, Handsfree and
the handset:
You can press these keys while on a
call or while your phone is idle.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Charts and Illustrations
This section contains handy charts and illustrations for your reference.
G
The dialing plan (the numbers you dial) - see the following chart.
Super Display Telephone key layout (inside back cover).
Multibutton Telephone key layout (inside front cover).
DSS Console key layout (page 136).
G
G
G
Your System's Dialing Plan
Due to the flexibility built into the system, your dialing codes or
feature capacities may differ from those in this guide. Check with
your Communications Manager and note differences in the
Revised Codes column on the following pages.
133
Download from Www.Somanuals.com. All Manuals Search And Download.
System Number Plan/Capacities
Your
Revised
Codes
28i
124i
124i
Enhanced
System Type:
28i
124i
384i
704i
Commonized Commonized
Abbreviated Dialing:
8
8
8
8
16
32
64
Abbreviated Dialing Groups
Abbreviated Dialing Bins
360
200
1000
200
1000
500
360
200
1000
1000
1000
1990
1000
1000
2000
1000
2000
Common Abbreviated Dialing Bins
Account Codes: Verifiable Account
1000
1000
1000
1000
Code Table
Call Pickup Group Numbers
1-8
1-8
1-8
1-8
1-9 or
01-64
1-9 or
01-32
1-9 or
01-64
Caller ID Bins
200
(0-199)
200
(0-199)
200
(0-199)
200
(0-199)
400
(0-399)
1000
(0-999)
1000
(0-999)
Conference Circuits
8 4-Party
4 8-Party
8 4-Party
4 8-Party
8 4-Party
4 8-Party
8 4-Party 8 4-Party 32 4-Party 32 4-Party
4 8-Party 4 8-Party 16 8-Party 16 8-Party
Department (Extension) Group
Numbers
1-8
1-8
1-8
1-8
1-16
1-32
1-64
Department (Extension) Group
Number Range
200-799
200-799
200-799
200-799 200-799 200-799 200-799
Door Box Numbers
1-8
1-20
1-8
1-20
1-8
1-72
1-8
1-8
1-8
1-8
Extension Port Numbers
Extension Number Range
1-72
1-200
1-256
1-640
301-799
301-799
301-799
301-799 301-548 301-799 301-499
5000-5696
Download from Www.Somanuals.com. All Manuals Search And Download.
System Number Plan/Capacities
Your
Revised
Codes
28i
124i
124i
Enhanced
System Type:
28i
124i
384i
704i
Commonized Commonized
Operator Access
Paging:
0
0
0
0
0
0
0
0
0-8
0-8
0-8
0-8
0-8
0-8
0-8
External/Combined Page Zones
Internal Page Zones
0-8
0-8
0-8
0-8
0-9 or
00-16
0-9 or
00-32
0-9 or
00-64
Park Orbits
1-8
-
01-32
-
01-32
-
1-8
-
01-32
-
01-32
4
01-64
-
Tenant Groups
Trunk Port Number
01-16
1-16
01-16
1-16
01-52
1-16
01-52
1-16
73-96
01-52
1-26
001-128 001-192
1-128 1-96
Trunk Group Numbers
Virtual Extension Port Numbers
Virtual Extension Number Range
73-96
301-799
73-96
301-799
73-96
301-799
201-248 257-384 641-896
301-799 501-548 301-799 5441-5696
Download from Www.Somanuals.com. All Manuals Search And Download.
Charts and Illustrations
Your DSS Console
1
2
3
4
5
6
7
8
9
10
20
30
40
11
21
31
12
22
32
13
23
33
14
24
34
15
25
35
16
26
36
17
27
37
18
28
38
19
29
39
41
51
61
42
52
62
43
53
63
44
54
64
45
55
65
46
56
66
47
57
67
48
58
68
49
59
69
50
60
70
71
81
91
72
82
92
73
83
93
74
84
94
75
85
95
76
86
96
77
87
97
78
88
98
79
89
99
80
90
100
ALT.
NIGHT
DAY
BREAK NITE2
PAGE GROUP DOOR
EXT.1
EXT.2
Alternate
Answering Key
External
Page
Door
Boxes
2nd 100
Extensions
(DLS on 124i)
Night
Service Keys
Internal
Page
1st 100
Extensions
136
Download from Www.Somanuals.com. All Manuals Search And Download.
guide you through your
features. While your phone is
idle, the Soft Keys are normal
One Touch Keys.
Soft Keys
Alphanumeric
Display
CHECK
CLEAR
SERVICE
RINGING
Ringer/Splash Tone
Volume Control
(Not available
on all models)
[DIRECTORY]
[MENU]
1
2
3
4
5
6
7
8
9
10
16
22
11
17
23
12
18
24
Programmable
Function Keys
13
19
14
20
15
21
MW
Abbreviated
Dialing
1
2
3
DIAL
CALL 1
4
7
5
8
6
Dual Line
LND
MIC
CALL 2
DND
FLASH
CONF
Appearance Keys
9
Last Number
Redial
0
VOL
SPK
HOLD
Do Not Disturb
Microphone Cutoff
Speakerphone
Microphone
Message
Waiting Lamp
Handsfree,
Handset,
Page and BGM
Volume Control
Download from Www.Somanuals.com. All Manuals Search And Download.
NEC America Inc., Corporate Networks Group
4 Forest Parkway, Shelton, CT 06484
TEL: 203-926-5400 FAX: 203-929-0535
cng.nec.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|