T 572
DVD / CD / MP3 Player
Owner’s Manual
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Programmed Playback with Video CD
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Programmed Playback with Video CD
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel and Display Window . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
and Audio CD . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Repeat Programmed Tracks/All . . . . . . . . . . 19
ꢀ Erasing a Track from Program List. . . . . . . . 19
ꢀ Erasing the Complete Program List . . . . . . . 19
Operation with MP3 Disc. . . . . . . . . . . . . . . . . . . . 20
Playing an MP3 Disc . . . . . . . . . . . . . . . . . . . . . 20
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ꢀ Moving to another Track . . . . . . . . . . . . . . . 20
ꢀ Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 20
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 20
Programmed Playback with MP3 Disc . . . . . . . . . 21
Programmed Playback with MP3 Disc . . . . . . . . 21
ꢀ Repeat Programmed Tracks/All . . . . . . . . . . 21
ꢀ Erasing a Track from Program List. . . . . . . . 21
ꢀ Erasing the Complete Program List . . . . . . . 21
Additional Information . . . . . . . . . . . . . . . . . . . . . 22
Last Condition Memory . . . . . . . . . . . . . . . . . . . 22
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 22
HDCD Playback. . . . . . . . . . . . . . . . . . . . . . . . . 22
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to Optional Equipment . . . . . . . . . . . 10
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 11-14
General Explanation. . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . 11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 12-14
ꢀ Initial Settings General Operation. . . . . . . . . 12
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 14
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 24
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Operation
Operation with DVD, Video CD and Audio CD. 15-18
Playing a DVD, Video CD and Audio CD . . . . . . 15
ꢀ Exchanging discs during playback . . . . . . . . 15
ꢀ Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 15
ꢀ Exchanging the disc and starting playback. . 15
General Features. . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 16
ꢀ Moving to another CHAPTER/TRACK . . . . . 16
ꢀ Still Picture and Frame-by-Frame Playback . 16
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Selecting the sound enhancement . . . . . . . 17
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 18
Special DVD Features . . . . . . . . . . . . . . . . . . . . 18
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Changing the Audio Language. . . . . . . . . . . 18
ꢀ Changing the Audio Channel . . . . . . . . . . . . 18
ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-related terms
Title (DVD only)
Playable Discs
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
DVD Video
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a HDCD, CD-R or CD-RW
that contains audio titles or MP3 files.
A title is composed of one or several chapters. Each
chapter is assigned a chapter number, enabling you to
locate the chapter you want. Chapter numbers may not
be recorded on all discs.
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on this unit.
– This unit cannot play CD-R/RW discs that do not con-
tain any data, or contain different kinds of formatted
data other than MP3 and CD-DA data.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions.
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
able, or other functions may be added.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be playable on this unit.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
for playback of region “2” encoded DVD soft-
ware. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled “2” or “ALL”. If you
try to play any other discs, the message “Check Regional
Code” will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback is prohibited by area limits.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
2
®
HDCD (High Definition Compatible Digital )
HDCD® (High Definition Compatible Digital®) is a
recording system that has improved audio CD sound in
dynamic range, sound field reproducibility and vocal
acoustics.
This DVD player is equipped with an HDCD decoder.
The HDCD indicator illuminates when playing an
HDCD-encoded audio CD.
Note on DTS-encoded CDs
To avoid possible damage to the audio system, turn
down the volume before playing back such discs. Adjust
the volume gradually to personal preference. To enjoy
DTS Digital SurroundTM playback, an external 5.1 chan-
nel DTS Digital SurroundTM decoder system must be
connected to the digital output of the player.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Precautions
Storing discs
After playing, store the disc in its case.
Handling the unit
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature build-
up inside the car.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Cleaning discs
When setting up the unit
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, and turn off
the unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not allow rubber or plastic products to
contact the unit for a long period of time. They will leave
marks on the surface.
To move the unit
When you move the player, take out any discs. If you
don’t, the discs may be damaged or drop into the inter-
nal workings of the DVD player.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Cleaning the unit
About Symbols
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About the
symbol display
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
To obtain a clear picture
About the disc symbols for instructions
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
When a section in this manual includes the following
icons, the data provided herein is applicable only to the
software represented by that icon.
DVD DVD
VCD2.0
VCD1.1
CD
Video CDs with the PBC (playback control)
function.
For details, please contact your nearest dealer.
Video CDs without the PBC (playback control)
function.
Notes on Discs
Audio CDs.
Handling discs
MP3 MP3 disc.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel and Display Window
STANDBY/ON indicator
Lights red when the player is in Standby mode (off).
1 2 3 4 (left/right/up/down), ENTER
- Selects an item in the menu.
- Acknowledges menu selection.
RANDOM
Plays tracks in random order.
MENU
REPEAT
Accesses menu on a DVD disc.
Repeat chapter, track, title, Disc, all.
SKIP ( S/ T)
Moves to PREVIOUS or NEXT chapter/track.
STOP ( 9)
Stops playback.
PLAY ( 2)
Starts playback.
Display window
Shows the current
status of the player.
Remote Sensor
Point the DVD Player remote
control here.
OPEN/CLOSE ( /)
Opens or closes the disc tray.
Disc Tray
Insert a disc here.
STOP ( 9)
Stops playback.
SCAN ( Q/ R)
Press for fast reverse search or forward search.
POWER
Switches the player ON and OFF.
NEXT DISC
Moves to the next available disc tray.
ANGLE Lights when multi angles
TITLE Indicates current title number
are present.
CHP/TRK Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG. Programmed playback active
A light will appear if a disc is in the disc
tray. The current disc tray flashes.
DVD
DVD inserted
CD Audio CD inserted
VCD Video CD inserted
HD CD HDCD disc inserted
MP3 MP3 disc inserted
RANDOM RANDOM play-
back active
Indicates repeat
mode
Indicates current player function:
Playback, Pause, etc.
MP3 VCD HD CD DVD
1
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
2
5
3
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
OPEN/CLOSE
Switches DVD Player ON and OFF.
Opens and closes the disc tray.
SETUP •
• AUDIO
Accesses or removes setup menu.
Selects an audio language (DVD) or
an audio channel (CD).
REPEAT •
Repeat chapter, track, title, all.
• SUBTITLE
POWER
OPEN/CLOSE
Selects a subtitle language.
A-B •
Repeat sequence.
SETUP
AUDIO
REPEAT
A-B
RANDOM
SOUND
• ANGLE
Selects a DVD camera angle if
available.
RANDOM •
Plays tracks in random order.
SUBTITLE ANGLE
• SOUND
Selects sound mode during disc
playback.
TITLE
MENU
TITLE
Displays the discs Title menu, if
available.
MENU
1 2 3 4 (left/right/up/down)
SELECT
ENTER
Accesses menu on a DVD disc.
Selects an item in the menu.
SELECT/ENTER
Acknowledges menu selection.
DISPLAY
Accesses On-Screen display
DISPLAY
RETURN
RETURN
ZOOM
MARKER — SEARCH
ZOOM •
- Removes the setup menu.
- Displays the menu of a video CD
with PBC.
Enlarges video image.
SCAN
SKIP
PLAY
MARKER •
STOP
Marks any point during playback.
• SCAN ( Q/ R)
Press for fast reverse search or for-
ward search.
NEXT DISC PAUSE/STEP
SLOW
SEARCH •
Displays MARKER SEARCH menu.
NEXT DISC •
Moves to the next available disc tray.
• PLAY (
2)
Starts playback.
1
4
2
3
6
5
8
0
• STOP ( 9)
Stops playback.
PAUSE/STEP ( ;) •
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
7
CLEAR
9
PROGRAM
• SKIP ( S/ T )
Moves to PREVIOUS or NEXT
chapter/track.
Reverse SLOW ( , ) •
Reverse slow playback.
0-9 number buttons
Selects numbered items in a menu.
Forward SLOW ( . ) •
Forward slow playback.
PROGRAM
Accesses or removes program menu.
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Remote Control Operation Range
Remote control battery installation
Point the remote control at the remote sensor and press
the buttons.
Detach the battery cover on the rear of
the remote control, and insert two R03
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor
(size AAA) batteries with
aligned correctly.
and
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and new batteries. Never
mix different types of batteries (stan-
dard, alkaline, etc.).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
TO TV (SCART) Jack
Connect to a TV with SCART jack.
VIDEO OUTPUT Switch
Select either S-VIDEO OUT or SCART’s RGB signal,
depending on how you connected the DVD Player to the TV.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
VIDEO OUT
Connect to a TV with video inputs.
*System Select switch
12V TRIGGER IN
By connecting this DVD player to another NAD
audio component or system controller equipped
with a 12V trigger output, you can remotely operate
the T572 power ON/OFF.
AC Power Cord
Plug into the power source.
COAXIAL (Digital audio
out jack)
Connect to digital (coaxial)
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
audio equipment.
ANALOG AUDIO OUT (Left/Right)
Connect to an amplifier, receiver or stereo system.
Dust protection cap
Remove the dust protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
* System Select switch
You can enjoy NTSC or PAL discs by using System
Select switch to choose the appropriate system.
PAL:
Select when DVD player is connected with
PAL-TV.
NTSC: Select when DVD player is connected with
NTSC-TV.
AUTO: Select when DVD player is connected with
Multi system TV.
• When the selected System Select switch does not
coincide with the system of your TV, normal color
picture may not be displayed.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• Set System Select switch when the power is turned
off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Rear of TV
Tips
SCART INPUT
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
S-VIDEO
INPUT
VIDEO
INPUT
AUDIO INPUT
R
L
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
ꢀ For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to optional equipment” on page 10.
A
V
S
T
Caution
–
Make sure the DVD Player is connected directly to the
TV. Select the TV to the corresponding video input.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (Turntable) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Connecting to a TV
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
ꢀ When using the SCART’s RGB signal, set the Video
Output Select switch to COMPONENT. When using
the S-VIDEO OUT jack, set the Video Output Select
switch to S-VIDEO.
Rear of DVD player
Note
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
Video connection (Good)
Connect the VIDEO OUT jack on the DVD Player to
1
the video in jack on the TV using the video cable
supplied (V).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
S-Video connection (Better)
Connect the S-VIDEO OUT jack on the DVD Player
1
to the S-Video in jack on the TV using an optional
S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
SCART connection
Connect the TO TV scart jack on the DVD Player to the
corresponding in jacks on the TV using the scart cable
(T).
Note
For using SCART’s RGB signal, set the Video Output
Select switch to “COMPONENT”.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Rear of DVD player
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver or stereo system, using the supplied
audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
O
A
X
Connect one of the DVD Player’s DIGITAL AUDIO
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical O or coaxial X) audio cable.
R
L
OPTICAL
COAXIAL
You will need to activate the player’s digital output.
DIGITAL INPUT
AUDIO INPUT
DIGITAL INPUT
2
(See “Digital Audio Output” on page 13).
Amplifier (Receiver)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Note
This player does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS
multi channel surround, you must connect this player to
a DTS compatible receiver via one of this player’s
digital audio outputs.
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound can only be
obtained if your receiver is equipped with a Digital
Multi-channel surround sound decoder.
– To confirm the audio format of the current DVD
selection display, press AUDIO.
– Repeated pressing of the AUDIO button may allow
you to select between various audio formats available
on the disc.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Repeat mode Icons
General Explanation
This manual gives basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
TITLE
Repeat Title
CHAPT
Repeat Chapter
TRACK
Repeat Track (non-PBC Video CDs
occurs, the symbol
appears on the TV screen, indi-
and Audio CD only)
cating that the operation is not permitted by the DVD
Player or is not available on the disc.
ALL
Repeat All Tracks (non-PBC Video CDs
and Audio CD only)
On-Screen Display
General playback status can be displayed on the TV
A
B
Repeat A-B
OFF
Repeat Off
screen. Some items can be changed on the menu.
Resume play from this point
Action prohibited or not available
On-screen display operation
Press DISPLAY during playback.
Notes
1
2
ꢀ Some discs may not provide all of the features includ-
ed on the on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
Press 3or 4to select an item.
The selected item will be highlighted.
Press 1or 2to change the setting of an item.
3
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
DVD
Items
Function (Press 3
/
4to select desired item)
Selection Method
Title Number
Displays the current title number and total number of
1 / 2, or Numbers,
SELECT/ENTER
1/3
1/12
available titles, and skips to a desired title number.
Chapter Number
Time search
Displays the current chapter number and total number of
available chapters, and skips to a desired chapter number.
1 / 2, or Numbers,
SELECT/ENTER
Displays the elapsed playing time, and
searches a point identified by its elapsed time.
Numbers,
SELECT/ENTER
0:16:57
Audio language
and Digital Audio
Output mode
Displays the current audio soundtrack language,
encoding method and channel number, and
any changes you make to the setting.
1
ENG
D
6 CH
1
/
2
Subtitle language
Displays the current subtitles language, and
1
1
/
/
2
2
OFF
1/1
any changes you make to the setting.
Angle
Displays the current angle number and total number of
angles, and any changes you make to the angle number.
Sound
Displays the current sound mode, and
any changes you make to the setting.
1
/
2
NORM.
VCD1.1
VCD2.0
CD
Items
Function (Press 3
/
4to select desired item)
Selection Method
Track Number
Displays the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
1
/
2
, or Numbers,
1/4
SELECT/ENTER
Time
Displays the elapsed playing time (Display only)
0:16:57
–
Audio Channel
Sound
Displays the audio channel, and
STER.
1
1
/
/
2
2
changes you make to the audio channel.
Displays the current sound mode, and
any changes you make to the setting.
NORM.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Initial Settings
You can install your own Personal Preferences.
Initial Settings General Operation
English
Spanish
French
German
Italian
Disc Audio
Disc Subtitle
Disc Menu
Press SETUP.
The setup menu appears.
1
Rating
Country Code
TV Aspect
Original
English
Disc Audio
Menu Language
P
Digital Audio Output
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Country Code
TV Aspect
Others
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
Picture
TV Aspect DVD
Others
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both side of the original picture may be cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Press 3/4to select the desired item.
The screen will display the current setting for the
selected item, as well as alternate setting(s).
2
While the desired item is displayed, press 2,
then 3/4to select the desired setting.
3
4
5
Press SELECT/ENTER to confirm your selection.
Some items require additional steps.
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Press SETUP, RETURN or PLAY to exit the
setup menu.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Language
Menu Language
Digital Audio Output
Disc Language DVD
Select a language for the disc’s Menu, Audio and
Subtitle.
Others
Original : The original language included on the disc is select-
ed.
Other : To select another language, enter the 4-digit number
corresponding to the language code list on page 24. If you
enter the wrong language code, press CLEAR.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Country Code
TV Aspect
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
Others
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Sound
Others
Digital Audio Output
The DRC, Vocal and PBC settings can be changed.
ꢀ Press 3/4to select the desired item and press
SELECT/ENTER. The setting of the selected item
alternates between On and Off.
Each DVD disc may have a variety of audio output
options. Set the player’s Digital Audio Output according
to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connect the DVD Player’s DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connect the
DVD Player’s DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder
or MPEG decoder.
DRC On
Vocal On
PBC On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
i
Digital Audio Output
PCM: Select when connected to a 2 channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Sample Freq.
48 KHz
Menu Language
Digital Audio Output
96KHz
Vocal
Others
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Sample Frequency
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass all signals through without
down conversion, or processing.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Parental Control
DVD
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 25.).
Rating DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code Set
Disc Audio
Disc Subtitle
Disc Menu
U
S
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
8
Disc Audio
Disc Subtitle
Disc Menu
7
6
Select Country Code using the 3/4buttons on
the setup menu.
Rating
5
1
Country Code
TV Aspect
4
3
2 While Country Code is selected, press 2.
Menu Language
Digital Audio Output
2
1
Unlock
Change
3 Follow step 3 of “Rating” on left.
Others
4 Select the first character using the 3/4buttons.
Select “Rating” on the Setup menu using the 3
and 4buttons.
1
Shift the cursor using /2 buttons and select
1
5
6
the second character using 3/4buttons.
2 While “Rating” is displayed, press 2.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
menu.
When you have not entered a password yet;
3
Install a 4-digit password using the number buttons
to create a personal 4-digit security password, then
press SELECT/ENTER. Enter the 4-digit password
again and press SELECT/ENTER to verify.
When you have already entered a password;
Install your 4-digit password using the number
buttons to confirm the personal 4-digit security
password, then press SELECT/ENTER.
Note
Confirmation of your 4-digit password is necessary
when the code is changed (see “Changing the 4-digit
code” below ).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Install your old code, then press SELECT/ENTER.
3 Select Change using the 3/4buttons then press
SELECT/ENTER.
4 Install the new 4-digit code, then press
SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and install your 4-digit security password
again.
Select a rating from 1 to 8 using the 3/4but-
tons. One (1) has the least playback restrictions.
4
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play without restrictions.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found,
playback will stop. You must enter your 4-digit
password or change the rating level in order to play
the disc.
5 Install exactly the same code a second time and veri-
fy by pressing SELECT/ENTER.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499.”
The 4-digit password is cleared. “P CLr” appears on the dis-
play. The message will appear if the disc tray is closed. It
will be on the display until you try another feature.
3 Enter a new code as shown above to the left (Rating).
Press SELECT/ENTER to confirm your rating
5
selection, then press SETUP to exit the menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD
Exchanging discs during playback
Playing a DVD, Video CD and Audio CD
ꢀ Press OPEN/CLOSE on the front panel during play-
back to open the disc tray.
VCD2.0
VCD1.1
Playback Setup
DVD
CD
ꢀ Press NEXT DISC to rotate the disc trays to the
desired position. The carousel will rotate clockwise by
one disc increments.
ꢀ Exchange the discs and press OPEN/CLOSE to close
the disc tray.
ꢀ Turn on the TV and select the video input source
corresponding to the DVD player.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the DVD player.
Press OPEN/CLOSE to open the disc tray.
Note
1
– The disc tray presently loaded in the play position can
not be exchanged.
Load your disc in the tray, with the label facing
2
up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
• Discs can be loaded one at a time by pressing
NEXT DISC to rotate the carousel.
Skipping discs
Press NEXT DISC during play or when playback is
stopped.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
Notes
3
– When NEXT DISC is pressed, the disc tray rotates
and playback begins from the beginning of the next
disc.
In some cases, the disc menu may appear instead.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
– When NEXT DISC is pressed during playback of disc
5, playback of disc 1 will start.
If a disc menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD that contains a menu.
Exchanging the disc and starting playback
DVD
Use the 1 2 3 4 buttons to select the title/chapter
and additional selections you want, then press
SELECT/ENTER to start playback.
Press TITLE or MENU to return to the disc menu
screen.
1.Press OPEN/CLOSE during playback or when play-
back is stopped.
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2.Exchange the disc.
3.Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that was in front).
VCD2.0
ꢀ Use the number buttons to select the track you want
to view.
Press RETURN to return to the disc menu screen.
ꢀ Menu setting and the exact operating procedures for
using the disc menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
13.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 14).
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD (Continued)
VCD2.0
VCD1.1
Slow Motion DVD
General Features
1 Press SLOW t or T during playback.
The player will enter SLOW mode.
Note
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (reverse), or T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available from the Setup menu.
3 To exit slow motion mode, press PLAY.
1/3
Moving to another TITLE DVD
Note
Slow motion playback in reverse is not available from a
Video CD.
When a disc has more than one title, you can select to
another title as follows:
ꢀ Press DISPLAY when playback is stopped. From the
title function, press the appropriate numbered button
(0-9) to select a title number.
VCD2.0
VCD1.1
Search DVD
CD
1 Press SCAN m or M during playback.
The player will now go into SEARCH mode.
Moving to another CHAPTER/TRACK
2 Press SCAN m or M repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD and Audio CD, the Search speed
changes: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
1/12
1/3
VCD1.1
DVD
CD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
ꢀ Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
3 To exit SEARCH mode, press PLAY.
VCD1.1
Random Karaoke DVD
CD
ꢀ Press SKIP . twice briefly to step back to the pre-
vious chapter/track.
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM (1-3)” appears on the TV screen.
ꢀ To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4to select C (chapter)
(or for a Video CD and Audio CD, select T for track).
Then, enter the chapter/track number using the num-
bered buttons (0-9).
• RANDOM1: Plays all the tracks on a single disc in random
order and then stops.
• RANDOM2: Plays all the tracks on current disc in
random order and then plays all the tracks on each suc-
ceeding disc in random order and then stops.
• RANDOM3: Plays 2 tracks randomly from a disc and then
plays 2 tracks randomly from a different disc until all
tracks on all discs have been played.
Note
For two-digit numbers, press the buttons in rapid
succession.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
Still Picture and Frame-by-frame playback
VCD2.0
VCD1.1
DVD
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame by frame by
pressing PAUSE/STEP repeatedly on the remote
control.
Tip
By pressing SKIP . or > during Random play-
back, the unit selects another title (track) and resumes
Random playback.
Note
CD
Pause
This function works only with Compact Discs, Karaoke
discs and video CD without PBC.
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD (Continued)
General Features (cont’d)
0:16:57
- : - - : - -
Time Search DVD
VCD2.0
VCD1.1
Repeat DVD
CD
The Time Search function allows you to start playing at
any elapsed time location on the disc.
DISC
ALL
TRACK
OFF
CHAPT
TITLE
1 Press DISPLAY during playback. The on-screen dis-
DVD Video Discs - Repeat Chapter/Title/Off
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
1
To repeat the chapter currently playing, press REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 Within 10 seconds, press 3/4to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes and sec-
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Video CDs and Audio CDs - Repeat Track/Disc/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
4
Within 10 seconds, press SELECT/ENTER to confirm the
start time.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat Disc icon appears on the TV screen.
Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
point.
3 To Repeat of entire all disc contents, press REPEAT a
third time.
The Repeat All icon appears on the TV screen.
NORM.
3D SUR
3D Surround DVD
4 To exit Repeat mode, press REPEAT a fourth time.
The Repeat Off icon appears on the TV screen.
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 13.
1 Press SOUND to select “3D SUR” during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select “NORM”.
VCD2.0
VCD1.1
Repeat A-B DVD
CD
A
*
A
B
OFF
VCD2.0
VCD1.1
Zoom DVD
To repeat a sequence in a title:
The Zoom function allows you to expand the video
image and to move the focus point of zoomed image.
1 Press A-B at your chosen starting point.
A- appears briefly on the TV screen.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
2 Press A-B again at your chosen end point.
A-B appears briefly on the TV screen, and the repeat sequence
begins (a-b repeat appears on the player’s display).
If you press ZOOM repeatedly, the magnification level
increases up to six times.
3 To cancel the sequence, press A-B.
2 Use the 1/2/3/4buttons to move the focus point off
the zoomed image.
3 Press CLEAR to resume normal playback or return to
the paused image.
Notes
ꢀ The zoom function may not work for some DVDs.
ꢀ The zoom function may not work on multi-angle
scenes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD, Video CD and Audio CD (Continued)
General Features (cont’d) Special DVD Features
DVD
VCD2.0
VCD1.1
DVD
CD
Marker Search
Checking the contents of DVD Video
discs: Menus
MARKER SEARCH
1/9
DVDs may contain menus that allow you to access spe-
cial features. To access the disc menu, press MENU.
Then, press the appropriate number button to select an
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER at the location
you want to memorize.
The Marker icon will appear on the TV screen briefly.
DVD
Title Menu
2
Repeat step 1 to enter up to nine Marker points on a disc.
1 Press TITLE.
To Recall a Marked Scene
If the current title has a menu, that menu will appear on the
screen. Otherwise, the disc menu may appear.
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
2 Within 10 seconds, press 1/2 to select a Marker num-
ber that you want to recall.
3 To remove the title menu, press TITLE again.
3 Press SELECT/ENTER.
Playback will start from the Marked scene.
DVD
Disc Menu
4 To remove the MARKER SEARCH menu, press
SEARCH.
1 Press MENU.
The disc menu is displayed.
2 To exit the disc menu, press MENU again.
To clear a Marked Scene
1 During disc playback, press SEARCH.
1/1
DVD
The MARKER SEARCH menu will appear on the screen.
Camera Angle
2 Press 1/2 to select the Marker number that you want
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
ꢀ Press ANGLE repeatedly during playback to select a
desired angle.
to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
The number of the current angle appears on the display.
5
To remove the MARKER SEARCH menu, press SEARCH.
DVD
Changing the Audio Language
Note
1
ENG
D
All disc markers are cleared when the power is turned
6
CH
off or the disc is removed.
Press AUDIO repeatedly during playback to hear different
audio languages or audio tracks available on the disc.
Changing the Audio Channel
RIGHT
STER.
LEFT
VCD
CD
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STEREO, LEFT or RIGHT).
1
ENG
DVD
Subtitles
Press SUBTITLE repeatedly during playback to view
the different subtitle languages available on the disc.
Note
If
appears, the feature is not available on the disc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback with Video CD and Audio CD
Programmed Playback with Video CD
and Audio CD
Repeat Programmed Tracks/All
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat All icon appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 13.
Insert a Video CD or Audio CD and close the
1
2
tray.
To resume normal playback from programmed
playback
Press and hold PROGRAM until “PROG.” indicator dis-
Press PROGRAM while playback is stopped.
The Program menu will appear.
Program
appears in the display window.
Step
1
1
Erasing a Track from Program List
1 Press PROGRAM while playback is stopped.
The Program menu will appear.
Clear All
2 Use 1/2/3/4 to select the track that you wish to erase
from the Program list.
3 Press CLEAR.
The track will be erased from the Program list.
Note
Press PROGRAM or RETURN to exit the Program
menu.
Erasing the Complete Program List
Enter the disc number using the numerical keys
(1-5) and then press SELECT/ENTER.
1 Press PROGRAM while playback is stopped.
The Program menu will appear.
2 Use 1/2/3/4 to select “Clear All”, then press
SELECT/ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
3
4
Enter the track number using the numerical
keys (0-9) and then press SELECT/ENTER.
The next area is selected.
Repeat steps 3 to 4.
Up to 20 tracks can be programmed.
5
Press PLAY to exit the menu.
The selected tracks are stored in the player memory and
playback begins with the first programmed sequence.
6
After playback of all programmed tracks is com-
pleted, playback is stopped
7
Tip
After playback of all programmed tracks is completed,
playback is stopped.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with MP3 Disc
Playing an MP3 disc
Notes on MP3 Discs
About MP3
The DVD Player can play MP3 formatted recordings on
CD-ROM, CD-R or CD-RW discs.
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The player can not read an MP3 file that has a file
extension other than “.mp3”.
Before playing MP3 recordings, read the notes on MP3
Recordings on right.
Insert a disc and close the tray.
1
The menu appears on the TV screen.
ꢀ The player can not read a non MP3 encoded file that
has a file extension “.mp3”.
MP3
Program
TRACK 1.MP3
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
MP3 Disc compatibility with this player is limit-
ed as follows:
1. Sampling Frequency / only at 44.1kHz
2. Bit rate / within 32 - 320kbps
Clear All
OFF
00:00
1
3. CD-R physical format should be “ISO 9660”
4. If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example “Direct-
CD” etc., it is impossible to playback MP3 files. We
recommend that you use “Easy-CD Creator”, which
creates an ISO9660 file system.
5. A single session disc requires MP3 files in the first
track. If there is no MP3 file in the 1st track, it can-
not playback MP3 files. If you wish to playback MP3
files, format all the data in the disc or use a new
one.
6. We do not recommend using CD-RW discs. Please
use finished CD-R discs only.
7. File names should be named using 8 letters or less
and must incorporate “.mp3” extension
e.g. “********.MP3”.
MP3 menu
Press 3/4to select a track then press PLAY.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display.
2
Playback will stop at the end of the disc.
3 To stop playback at any other time, press STOP.
MP3
Pause
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
MP3
8. Do not use special letters such as “_?!><+*}{`[@
]:;\/.,” etc.
9. Total number of files on the disc should be less than
200.
10. Use 74 minute CD-R discs (650M), Do not use 80
minute CD-R (700M) software
Moving to another Track
ꢀ Press SKIP . or > once during playback to
advance to the next track or to return to the beginning
of the current track.
ꢀ Press SKIP . twice briefly to step back to the pre-
vious track.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 files). That require certain pre-existing conditions
(see above) to insure compatible playback.
MP3
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat All icon appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Customers should also note that permission is
required in order to download MP3 files and music
from the Internet. NAD cannot grant such
permission. Permission should always be sought
from the copyright owner.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback with MP3 Disc
Repeat Programmed Tracks/All
Programmed Playback with MP3 Disc
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
Program allows you to store your favorite tracks for a
particular disc in the player memory.
Program can contain 60 tracks.
The Repeat All icon appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
Insert the disc and close the tray.
The menu is displayed on the TV screen.
1
2
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
Erasing a Track from Program List
1 Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
E
The
mark will appear to the right of the word Program
on the right side of the menu screen.
E
The
mark will appear.
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Note
Press PROGRAM to exit the Program Edit mode;
E
the
mark will disappear.
Press 3/4to select a track then press
SELECT/ENTER to place the selected track on
the Program list.
3
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 3/4to select “Clear All”, then press
SELECT/ENTER.
Repeat step 3 to place additional tracks on the
Program list.
4
MP3
Program
E
TRACK 1.MP3
TRACK 8.MP3
TRACK 2.MP3
TRACK 4.MP3
TRACK 3.MP3
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
To resume normal playback from programmed
playback
Clear All
OFF
00:00
1
Press and hold PROGRAM for 3 seconds until “PROG.”
indicator disappears in the display window.
MP3 menu
Press 2.
The programmed track you selected last is highlighted on
the program list.
5
6
Press 3/4to select the track you want to start
playing.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
Press PLAY to start.
Playback begins in the order in which you programmed the
tracks and “PROG.” appears in the display window.
Playback stops after all of the tracks on the Program list
have played once.
7
Note
The programmed tracks are cleared when the power is
turned off or the disc is removed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Last Condition Memory
VCD1.1
DVD
CD
This player memorizes the last condition for the last
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the player. If you load a disc that has its settings memo-
rized, the latest stop position is automatically recalled.
Notes
– Settings are stored in memory for use any time.
– This player does not memorize settings of a disc if
you switch off the player before commencing playback.
Screen Saver
A screen saver image appears when you leave the DVD
Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
VCD2.0
VCD1.1
Video Mode Setting DVD
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode number selected is displayed on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
ꢀ Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE4 →
MODE5 → MODE1
ꢀ If you turn off the power, the video mode will return to
initial default state (Auto).
HDCD Playback
HDCD is a process that increases the fidelity of both
specially encoded HDCD discs and standard CD audio
discs. When an HDCD-encoded disc is playing, the spe-
cial decoder is automatically activated and the HDCD
Indicator lights. No user intervention is required.
To enjoy the benefits of HDCD, your DVD Player must
be connected to your A/V receiver via the Analog Audio
Outputs. However, if your A/V receiver or surround
processor is equipped with built-in HDCD decoding, you
may also use a Coaxial or Optical digital audio connec-
tion so that the HDCD processing is done there.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
ꢀ The TV is not set to receive DVD signal ꢀ Select the appropriate video input mode
No picture.
output.
on the TV so the picture from the DVD
player appears on the TV screen.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable into the jacks
securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive DVD
signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cable into the jacks
securely.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
The playback picture is ꢀ The disc is dirty.
ꢀ Clean the disc.
poor.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
The DVD player does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system and Regional code.)
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor of the DVD player.
ꢀ Point the remote control at the remote
sensor of the DVD player.
ꢀ The remote control is too far from the
DVD player.
ꢀ Operate the remote control within about
23 ft (7 m).
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
remote control and the DVD player.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 12).
Code Language
6565 Afar
Code Language
7079 Faroese
7082 French
7089 Frisian
Code Language
7678 Lingala
Code Language
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sudanese
8386 Swedish
8387 Swahili
8465 Tamil
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
7679 Laothian
7684 Lithuanian
7686 Latvian, Lettish
7771 Malagasy
7773 Maori
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7783 Malay
8469 Telugu
8471 Tajik
6678 Bengali; Bangla
6679 Tibetan
6682 Breton
7784 Maltese
7789 Burmese
7865 Nauru
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
6765 Catalan
6779 Corsican
6783 Czech
7869 Nepali
7876 Dutch
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7879 Norwegian
7982 Oriya
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
8065 Panjabi
8076 Polish
8487 Twi
8083 Pashto, Pushto
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8575 Ukrainian
8582 Urdu
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
8590 Uzbek
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
8372 Serbo-Croatian
8373 Singhalese
7665 Latin
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Country Code List
Enter the appropriate code number for the initial setting “Country Code” (See page 14).
Code Country
Code Country
Code Country
Code Country
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
LY
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
HN
HR
HT
HU
ID
IE
IL
IN
IO
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
US
UY
UZ
VA
VC
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VE
VG
VI
Jordan
Japan
Kenya
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
Cayman Islands
Kazakhstan
Laos
Lebanon
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
AC 120V , 60 Hz
16W
430 X 118 X 408 mm (16.9 x 4.7 x 16.1 inches) (w x h x d)
5.7 kg (12.6 lbs)
Operating temperature
Operating humidity
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
System
Laser
Semiconductor laser, wavelength 650 nm
PAL/NTSC
Signal system
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1/SCART(TO TV)
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
5 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 330 Ω, RCA jack (L, R) x 1/SCART(TO TV)
Accessory
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
P/NO: 3834RS?????
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|