®
C 545BEE
Compact Disc Player
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
19 damage requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
fcc warning
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
induStrY canada requirement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) when the product exhibits a distinct change in performance-this
indicates a need for service.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED“DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
20 replacement parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN
THE LITERATURE ACCOMPANYING THE APPLIANCE.
21 Safety check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22 wall or ceiling mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
23 heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including amplifiers)
that produce heat.
warning
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
The equipment draws its nominal non-operational power from the AC
outlet with its POWER switch in the STANDBY position.
caution
The socket-outlet shall be installed near the apparatus and shall be easily
accessible.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
to completelY diSconnect thiS apparatuS from the ac
mainS, diSconnect the power SupplY cord plug from the
ac receptacle.
caution
The C 545BEE employs a Laser System. To ensure proper use of this product,
please read this owner’s manual carefully and retain for future reference.
Should the unit require maintenance, contact an authorized service
location. Use of controls, adjustments or the performance of procedures
other than those specified may result in exposure to laser radiation. To
prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when the enclosure is opened.
the mainS plug of the power SupplY cord Shall remain
readilY acceSSible.
caution
Changes or modifications to this equipment not expressly approved by
NAD Electronics for compliance could void the user’s authority to operate
this equipment.
do not Stare into beam.
fcc notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit
(from the largest outer dimensions including projections) that is equal to or
greater than shown below.
Left and Right Panels: 10 cm
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures
Rear Panel: 10 cm
Top Panel: 50 cm
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
important information for uk cuStomerS
information about collection and diSpoSal of
waSte batterieS (directive 2006/66/ec of the european
parliament and the council of european union) (for
european cuStomerS onlY)
DO NOT cut off the mains plug from this equipment. If the plug fitted is not
suitable for the power points in your home or the cable is too short to reach
a power point, then obtain an appropriate safety approved extension lead
or consult your dealer. If, nonetheless, the mains plug is cut off, REMOVE
THE FUSE and dispose of the PLUG immediately, to avoid possible shock
hazard by inadvertent connection to the mains supply. If this product is
not provided with a mains plug, or one has to be fitted, then follow the
instructions given below:
Batteries bearing any of these symbols indicate
that they should be treated as“separate
collection”and not as municipal waste. It is
encouraged that necessary measures are
implemented to maximize the separate
collection of waste batteries and to minimize the
disposal of batteries as mixed municipal waste.
important
DO NOT make any connection to the larger terminal which is marked with
the letter‘E’or by the safety earth symbol or colored GREEN or GREEN AND
YELLOW.
End-users are exhorted not to dispose waste
batteries as unsorted municipal waste. In order
to achieve a high level of recycling waste batteries, discard waste batteries
separately and properly through an accessible collection point in your
vicinity. For more information about collection and recycling of waste
batteries, please contact your local municipality, your waste disposal service
or the point of sale where you purchased the items.
The wires in the mains lead on this product are colored in accordance with
the following code:
BLUE – NEUTRAL
BROWN – LIVE
As these colors may not correspond with the colored markings identifying
the terminals in your plug, proceed as follows:
By ensuring compliance and conformance to proper disposal of waste
batteries, potential hazardous effects on human health is prevented and
the negative impact of batteries and waste batteries on the environment
is minimized, thus contributing to the protection, preservation and quality
improvement of the environment.
The BLUE wire must be connected to the terminal marked with the
letter‘N’or colored BLACK.
The BROWN wire must be connected to the terminal marked with the
letter‘L’or colored RED.
noteS on environmental protection
At the end of its useful life, this product must not be disposed
of with regular household waste but must be returned to a
collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user’s manual and
packaging, point this out.
When replacing the fuse, only a correctly rated and approved type should
be used, and be sure to re-fit the fuse cover.
if in doubt conSult a competent electrician.
The materials can be reused in accordance with their markings. Through
re-use, recycling of raw materials or other forms of recycling of old
products, you are making an important contribution to the protection of
our environment. Your local administrative office can advise you of the
responsible waste disposal point.
warning!
Batteries (battery pack or batteries installed) must not be exposed to
excessive heat such as sunshine, fire or the like.
note: the c 545bee iS not an auto voltage cd plaYer.
connect onlY to the preScribed ac outlet, i.e., 120v 60hz
or 230v 50hz.
record Your model number (now, while You can See it)
The model and serial number of your new C 545BEE are located on the
back of the cabinet. For your future convenience, we suggest that you
record these numbers here:
Model no. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial no. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2008, NAD Electronics International, a division of Lenbrook Industries Limited
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
table of contentS
NUMERIC KEY PAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RPT A-B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DIMMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PROGRAM AND DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FILTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
UNPACKING AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CD 8 REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢀ
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1ꢁ
PLAYING MP3/WMA FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
thank You for chooSing nad.
The C 545BEE CD Player is a technologically advanced and highly capable
product — yet we have invested great effort in making it simple and easy
to use. We have been careful to ensure that the C 545BEE is as musically
transparent and spatially accurate as possible, incorporating much of what
we’ve learned from a quarter-century’s experience designing audio and
home-theater components. As with all our products, NAD’s“Music First”
design philosophy guided the C 545BEE’s design in such a way that it can
confidently promise you state-of-the-art audiophile-quality music listening
for years to come.
We encourage you to take a few minutes now to read right through this
manual. Investing a little time here at the outset might save you a good
deal of time later, and is by far the best way to ensure that you make the
most of your investment in the C 545BEE.
One more thing: We urge you to register your C 545BEE ownership on the
NAD Worldwide Web site:
For warranty information contact your local distributor.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
getting Started
UNPACKING AND SETUP
what’S in the box
Packed with your C 545BEE you will find:
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD C 545BEE, we provide the following“Quick Start”instructions to get
you underway.
•
•
•
•
An audio cable connector
The CD 8 remote control with two AA batteries
A detachable AC power cord
This owner’s manual
Please make all the connections to your C 545BEE with the unit unplugged.
It is also advisable to power down or unplug all associated components
while making or breaking any signal or AC power connections.
Save the packaging
Please save the box and all of the packaging in which your C 545BEE
arrived. Should you move or otherwise need to transport your C 545BEE,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
plaY a cd
1
Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line
Output jacks to the corresponding CD inputs on your amplifier.
Connect the AC cord to the C 545BEE’s AC Mains input and then plug
into an AC outlet. The Standby LED indicator embedded around the
bezel of the STANDBY button will illuminate amber.
Press the STANDBY button to turn ON the player. The Standby LED
indicator will turn from amber to blue and illuminate the Vacuum
Fluorescent Display (VFD).
2
chooSing a location
3
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
23 feet/7 meters, between the C 545BEE’s front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 545BEE generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible to
stack the C 545BEE on top of other components.
4
5
Press [OPEN/CLOSE] to open the disc drawer.
Place a CD, label side up, in the tray’s circular recess. Be certain that the
disc is centered within the recess.
6
7
8
Press [PLAY]. The drawer closes automatically, and the disc begins to
play.
At any time you may press [SKIP
the disc.
Press [PAUSE] if you want to stop play temporarily while keeping the
pickup at its current position on the disc. Press [PAUSE] again or [PLAY]
when you want to resume playback. Press [STOP] if you want to end
play and reset the pickup to the beginning of the disc.
] to select different tracks on
NOTE ON INSTALLATION
IMPORTANT! Install the C 545BEE Compact Disc player on a level,
vibration-free surface. Severe vibration or operation in a tilted position
may cause the player to mis-track. The player may be stacked with other
stereo components, as long as there is adequate ventilation around it. If
the C 545BEE is placed in close proximity to a radio tuner (AM or FM), a
VCR or a television set, the operation of its digital circuits may produce
static that would interfere with reception of weak broadcast signals. If
this occurs, move the C 545BEE away from other devices or switch it off
when viewing or listening to broadcasts.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
front panel
1
StandbY: Press this button to switch ON the C 545BEE. The Standby
LED indicator will turn from amber to blue and illuminate the Vacuum
Fluorescent Display (VFD). Pressing the Standby button again turns the
unit back to standby mode.
The C 545BEE can also be switched ON from standby mode by pressing
[OPEN/CLOSE] or [PLAY/PAUSE] buttons on the front panel as well as on
the remote control.
5
plaY/pauSe: This dual-function button alternates between starting
and stopping playback. Press this button to toggle between Play
and Pause of a CD or other compatible media disc. Press to start play
or resume play after Pause. The icon [ ] is illuminated in the VFD
indicating the C 545BEE is in playback mode. If the disc tray is open,
press this button to automatically close the tray and start playback if a
disc is loaded.
If the disc tray is open and the Standby button is pressed, the disc tray
will draw close and the C 545BEE goes to standby mode.
During playback, press this button to stop playback temporarily,
keeping the optical pickup at its current position on the disc. The icon
2
3
StandbY led: This indicator will light up amber when the C 545BEE
is in standby state. When the C 545BEE is at ON state, this indicator will
illuminate blue.
[
] is illuminated in the VFD indicating the C 545BEE is in pause mode.
To resume playback at the exact point where it stopped, press [PLAY/
PAUSE] again.
diSc traY: With the disc tray open, insert a CD or other compatible
media disc face down onto the tray.
6
Stop: Press the [STOP] button once to stop playback and re-set the
pickup to the beginning of the disc. The display reverts to showing
the number of tracks and total playing time on the disc; for WMA/MP3
files, the display will revert to total number of files. If the C 545BEE was
programmed to play a selection of tracks, the program will be retained
in the player’s memory. Pressing [STOP] twice at program mode will
delete the program.
“No Disc”appears on the C 545BEE’s VFD if the disc is placed upside
down or there is no disc loaded.
NOTE
This player is not designed to accommodate neither a “damping disc”
placed on a CD nor two CDs stacked together. It plays audio CDs, but not
Repeat and Random playback mode can be disengaged by pressing
the [STOP] button.
7
random: This button when pressed will engage or disengage random
playback mode. When engaged (a corresponding“RANDOM”icon is
illuminated in the VFD), random playback of tracks or files will begin
4
open/cloSe: Press this button to open and close the disc tray. When
in standby mode, pressing this button will also switch ON the C 545BEE
and at the same time open the disc tray.
by pressing [PLAY/PAUSE] from STOP mode or [SKIP
] during
playback mode. Press [RANDOM] again to return to normal playback
(“RANDOM”icon in the VFD is extinguished). Random playback mode can
also be disengaged by pressing [STOP] button.
The Random playback mode can be used in combination with the
Repeat Play All mode but not with Program playback mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
front panel
8
repeat: A particular track or file can be repeatedly played back by
pressing this button. To repeat the playback of a particular track or file,
press the C 545BEE’s [REPEAT] button once – a corresponding“REPEAT”
icon is illuminated in the VFD. Pressing the same [REPEAT] button a
second time will repeat all the tracks or files - a corresponding“REPEAT
ALL”icon is illuminated in the VFD. Turn off repeat mode by pressing
[REPEAT] button a third time -“REPEAT”icon in the VFD is extinguished.
9
diSplaY: Toggle to display the following disc information during
playback
INFORMATION
AUDIO CD
CD TEXT
MP3/WMA
Elapsed time of the current track
Remaining time of the current track
Total playback time of the disc
Remaining time of the disc
Song title
✓
✓
✓
✓
-
✓
✓
✓
✓
✓
✓
✓
-
-
-
-
-
✓
✓
✓
✓
✓
✓
Artist name
-
Album name
-
File name
-
Elapsed time of the current file
Remaining time of the current file
-
-
-
-
File number of the current file with
respect to the total number of files
under the current folder
-
-
✓
NOTES
•
•
•
•
Some information may not be displayed on some discs. Display is
dependent on the disc’s information content.
If the file has no available information about the song title, artist or
album, the display will show “NO TITLE”, “NO ARTIST” or “NO ALBUM”.
For audio CD, the default information display is the elapsed time of the
current track.
VFD character length limits for MP3/WMA - File name: 32 characters; ID3
tag: 30 characters for Unicode, 60 characters for ASCII.
10 Skip/Scan: Press [
track or file.
] to skip forward or [
] to skip backward a
Press and hold [
a track/file. The SCAN [
] for more than 2 seconds to search up or down
] button causes the optical pickup to scan
backwards through the recording at high speed. The SCAN [
] button
causes the optical pickup to scan rapidly forward through the music.
11 vfd: The Vacuum Fluorescent Display (VFD) provides playback
information, settings and other indicators.
12 remote SenSor: Point the CD 8 at the remote sensor and press the
buttons. Do not expose the remote sensor of the CD 8 to a strong light
source such as direct sunlight or illumination. If you do so, you may not
be able to operate the C 545BEE with the remote control.
distance: About 23ft (7m) from the front of the remote sensor.
angle: About 30o in each direction of the front of the remote sensor.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
rear panel
ATTENTION!
Please make all the connections to your C 545BEE with the unit unplugged. It is also advisable to power down or unplug all associated components while
making or breaking any signal or AC power connections.
1
upgrade port: For future software program updates, use this port
to upgrade the C 545BEE. Owners who register their C 545BEE in our
updates (if any). Your custom installer or dealer can assist you in the
proper upgrade and setup of your C 545BEE.
4
+12v trigger input: The +12V Trigger input allows the C 545BEE
to be switched remotely from standby mode to ON and vice-versa
by ancillary equipment such as a preamplifier, AV processor, etc. The
controlling device must be equipped with a 12V trigger output to use
this feature.
2
3
line out: Connect to the corresponding analog audio input of an
amplifier, receiver or stereo system.
5
6
ir input: This input is connected to the output of an IR (infrared)
repeater (Xantech or similar) or the IR output of another component to
allow control of the C 545BEE from a remote location.
digital out (coaxial, optical): The digital playback audio
output signal is available at these ports. Connect the optical or coaxial
digital OUT ports to the corresponding S/PDIF digital input of an
amplifier, receiver, computer soundcard or other digital processors.
ac mainS input: The C 545BEE comes supplied with a separate AC
Mains cable. Before connecting the cable to a live wall socket ensure
that it is firmly connected to the C 545BEE’s AC Mains input socket first.
Always disconnect the AC Mains cable plug from the live wall socket
first, before disconnecting the cable from the C 545BEE’s Mains input
socket.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF CONTROLS
cd 8 remote control
on: Switch ON C 545BEE.
off: Switch OFF C 545BEE.
diSp: Show playback time and other display
information.
prog: Enter or exit program mode.
clear: Delete programmed track/file.
rand: Play tracks/files in random mode.
rpt: Repeat track, file or whole disc.
rpt a-b: Repeat sequence.
dim: Reduce, turn off or restore VFD
brightness.
filter: Switch between NORMAL and SLOW
bandwidth.
Stop: Stop playback.
pauSe: Pause playback temporarily.
folder: Select through folder lists.
file: Select through WMA/MP3 files.
enter: Select desired folder or WMA/MP3 file.
Skip [
Skip [
] : Go to next track or file.
] : Go to beginning of current track/
open: Open or close disc tray.
file or to previous track/file.
Scan [
plaY: Start playback.
] : Fast reverse/forward search.
0 to 9 number buttons: Direct-entry of track
or file number.
batterY aSSemblY
Press in and lift tab to remove battery cover out
of recess.
Press batteries into opening. Ensure correct
fitting is observed.
Replace battery cover by aligning and inserting
the two tabs into the holes. Press battery cover
into place until it“clicks”closed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
uSing the c 545bee - featureS
CD-R AND CD-RW AUDIO DISCS
•
•
Pressing [STOP] key at any time during the programming procedure will
put to a STOP to the sequence and clear all the currently programmed
tracks or files. VFD will revert back to displaying the total number of
tracks and total playback time for audio CD and total number of files for
MP3/WMA.
The C 545BEE can play back CD-R or CD-RW audio discs that have been
recorded on a computer or CD recorder. The quality of CD-R or CD-RW
audio discs varies widely which may affect playability. Some factors that
affect playability:
•
•
•
The quality of the disc itself. Generally speaking, CD-R or CD-RW blanks from
well-renowned companies give better results than unbranded ones.
The quality of CD-recorder or computer CD re/writer. Some recorders
and writers produce better results than others.
The CD-R and CD-RW were created with high-speed writing. In general,
the quality of a CD-R or CD-RW is better when produced at a lower
speed against a higher speed on the same recorder or re/writer.
Pressing [STOP] key twice during program playback will result to having
the whole program list deleted.
review/edit program liSt
1
Initiate review of your programmed entries by pressing [PROG].
•
•
If you are still in programming mode, press [PROG].
If during program playback, press [STOP] once, then [PROG].
2
3
The VFD will show the first Program Number and the corresponding
“blinking”programmed track.
To change the programmed track of a particular sequence, use the
PLAYING MP3/WMA FILES
The C 545BEE can play MP3/WMA formatted recordings on CD-R or CD-RW
discs. You may mix any of the file types on the disc. Using the CD 8 remote
control, one can select through the MP3/WMA folders and files as well as
start playback through the following steps
Direct-Entry numeric keypad buttons. Press [SKIP
] to move
forward or backward the programmed tracks as well as review the list
and change if so desired.
1
2
3
Load the applicable disc.
4
5
If you want to delete a particular program sequence during program
review, press [CLEAR] key.
After finalizing your program changes or completing your review, press
[PROG] again.
Press [FOLDER
Press [FILE
] to select desired folder. Press [ENTER].
] to select desired file number. Press [ENTER] to start
playback.
NOTES
program plaYback
•
The file number is recognized per disc, not per folder – that is, the
number assigned to each file corresponds to their sequence in the disc.
If you want to select file number “119” in a disc where there are 100 or
more MP3/WMA files, press “1” twice and then “9.”
1
2
To play the stored program, press [PLAY] while you are in“PROGRAM”
mode. “PROG”icon will appear in the display, indicating that a stored
program is being played. During Program Play, the SKIP buttons will
access only the tracks in the program list.
If you want to play only a portion of a stored program, initiate play and
press SKIP to jump over the programmed tracks that you don’t want to
hear.
•
IMPORTANT NOTICE
Customers should note that permission is required in order to download
MP3/WMA files and music from the Internet. NAD ELECTRONICS
INTERNATIONAL has no right to grant such permission. Permission
should always be sought from the copyright owner.
Stop or delete program
1
To terminate Program play, press [STOP] once. The stored track list remains
in memory. If you want to play the program again, simply press [PLAY].
To clear the program memory, perform any of the following steps
PROGRAMMING
2
The program function enables you to store your favorite tracks from any
disc in the player memory. When programming a sequence of tracks, the
C 545BEE must be in STOP mode. Using the CD 8 remote control, enter your
desired program sequence through the following steps
•
•
•
Press [STOP] twice during program playback.
Press [OPEN] to open the disc tray.
Switch OFF the C 545BEE by pressing the Standby button.
1
Press [PROG]. The display indicates“P01 T000”. The“000”in the“T000”
keeps on blinking, meaning that the player is awaiting the first Program
entry.
2
Use the Direct-Entry numeric keypad buttons to enter the first track
in your planned sequence. Upon entering the track number, the VFD
will briefly show the total number and total time of the currently
programmed tracks like“01 3:25”.
3
4
The display will revert to show“P02 T000,”indicating that the player is
ready for your second program entry. Upon entering the second track,
the VFD will again briefly show the total number and total time of the
currently programmed tracks like“02 6:45”–“02”indicates that there are
now a total of two programmed tracks and“6:45”is the total playback
time of both programmed tracks.
Repeat steps 2 and 3 to select and store other track numbers in
memory, up to a maximum of 40 entries. If you attempt to program
more than 40 tracks or files, “P-FULL”will be displayed in the VFD.
Press [PROG] to end or finalize the program – the VFD will show the last
programmed number and track.
5
6
Press [ ] to start program playback.
NOTES
•
•
Programming of MP3/WMA files is the same as above procedure.
If you want to select file number “119” in a disc where there are 100 or
more MP3/WMA files, press “1” twice and then “9.”
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
uSing the c 545bee – cd 8 remote control
A wireless remote control is provided with your compact disc player,
enabling you to operate playback functions from the comfort of your chair
or from virtually anywhere in the room. For reliable operation there should
be a clear line-of-sight path from the remote control to the front of the CD
player. If the player does not respond to remote commands, it may be that
this line-of-sight path is obstructed by clothing, paper or furnishings.
DIMMER
Toggle to reduce, turn off and restore VFD brightness.
PROGRAM AND DELETE
Use [PROG] button to start, review, edit or exit programming mode. In
combination with [PROG] button, the [CLEAR] button allows the deletion of
Most of the buttons on the remote control handset have the same effect as
the corresponding buttons on the front panel of the player. In addition, the
handset is equipped with some extra buttons like the following function
keys.
FILTER
The [FILTER] button is used for selecting the bandwidth of the audio low
pass filter for the CD, MP3 and WMA media being played. The options are
NORMAL Bandwidth and SLOW Bandwidth. For some recordings the SLOW
Bandwidth may provide a wide frequency range and spatial feeling. Toggle
CD 8's [FILTER] button to select “NORMAL” or “SLOW” mode. “NORMAL FILTER”
or “SLOW FILTER” will be correspondingly shown in the VFD.
NUMERIC KEY PAD
Using the direct-entry numeric keypad (0 to 9) causes the C 545BEE to jump
directly to the beginning of a numbered track and commence play. Thus, to
play Track 5, simply press“5”. To play Track 20, press“2”and“0”.
RPT A-B
normal: Select NORMAL bandwidth to engage a standard CD high-
pass filter slope for playback of CD, MP3, and WMA music through the
two channel stereo audio jacks.
Slow: Select SLOW bandwidth to engage a gentle high-pass filter
slope for playback of CD music through the two channel stereo audio
jacks. This feature is particularly useful for higher bit rate recordings.
To repeat a sequence, implement the following procedures:
1
2
Press [RPT A-B] at your chosen starting point.
Press [RPT A-B] again at your chosen end point. The repeat sequence
begins.
3
Press [RPT A-B] again to cancel the sequence.
REFERENCE
troubleShooting
condition
poSSible cauSeS
poSSible SolutionS
No power.
•
•
The power cord is disconnected.
•
•
Plug the power cord into the wall outlet
securely.
The power is ON, but the C 5ꢂ5BEE does
not work.
No disc is inserted.
Insert a disc.
The C 5ꢂ5BEE does not start playback.
•
•
•
The disc is loaded upside down.
The disc is too dirty.
•
•
•
Reload the disc with the label side UP.
Clean the disc.
No sound.
The equipment connected with the audio
cable is not set to receive CD signal output.
Select the correct input mode of the audio
receiver so you can listen to the sound from
the C 545BEE.
•
•
•
•
•
The power of the equipment connected with
the audio cable is turned off.
•
•
•
•
•
Turn on the equipment connected with the
audio cable.
Sound skips.
The C 545BEE is subject to vibration or physical
shock from external sources.
Change the installation location.
The remote control does not work properly.
The remote control is not pointed at the
remote sensor on the CD player.
Point the remote control at the remote
sensor of the CD player.
The remote control is too far from the CD
player.
Operate the remote control closer to the
CD player.
The remote control batteries are dead.
Replace the remote control batteries.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
noteS on diScS
handling diScS
cleaning diScS
Do not touch the playback side of the disc. Hold the disc by the edges so that
fingerprints do not get on the surface. Never stick paper or tape on the disc.
Fingerprints and dust on the disc can cause poor picture quality and sound
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc
from the center out.
Storing diScS
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Do not use strong solvents such as alcohol, benzine, thinner, commercially
available cleaners, or anti-static spray intended for older vinyl records
SpecificationS
GENERAL PARAMETERS
Output level - Analog
Optical
2.2 0.1 V
-22.5 3.5 dBm
Coaxial
650 150 mV
Frequency response
0.3 dB (ref. 0 dB 20 Hz-1 kHz)
0.5 dB (ref. 0 dB 5 kHz-20 kHz)
< 0.01% (ref. 1 kHz)
118 dB (A-weighted, ref. 1 kHz)
0.5 dB (ref. 0dB 1kHz)
95 dB
Total harmonic distortion
Signal/Noise ratio
Channel balance
Dynamic range
Channel separation
De-emphasis
> 90 dB
-3.73 to -5.33 dB (ref. 0dB 5 kHz)
-8.04 to -10.04 dB (ref. 0 dB 16 kHz)
0.01 dB (ref. 1 kHz at -3 dB)
0.02 dB (ref. 1 kHz at -6 dB)
0.02 dB (ref. 1 kHz at -10 dB)
0.05 dB (ref. 1 kHz at -20 dB)
0.15 dB (ref. 1 kHz at -60 dB)
Linearity
DIMENSION AND WEIGHT
Unit Dimensions (W x H x D)
435 x 285 x 70 mm (Net)
435 x 293 x 86 mm (Gross)*
4.9 kg
Net weight
Shipping weight
6.3 kg
* - Gross dimensions include feet, extended buttons and rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 545BEE.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
www NADelectronics com
©2008 nad electronicS international
a diviSion of lenbrook induStrieS limited
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International
C 545BEE Manual 08/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|