EMS5-95122B
Revised 05-03
Catalog Section 40
(00-02-0102)
Electronic Monitoring
System/Controller
Model EMS547
■
Field Adjustable Parameters
■
First-Out Shutdowns and/or Alarms
■
Shutdown History File
■
Service Reminders
■
Four Communication Ports
■
External PC Card Reader and Modem Ready
Back Lit LCD or VFD Alphanumeric Display
■
Approved for Class I, Division 2, Groups C & D areas.
R
R
C
Description
The EMS547 Electronic Monitoring System/
Controller is micro-processor based for monitoring
and control of equipment functions. It is especially
suited to tasks requiring remote modem or SCADA
communications. Four built-in communication ports
provide a variety of communications capabilities.
Basic programs provide selectable auto or manual
start/stop and first-out shutdown for engine functions
such as pressure, temperature, level and overspeed.
Time delays for lockout during start up are included.
Because of the flexibility of this product, please call
Optional: Special order analog inputs available,
including end of line 4-20 mA and 0-5 VDC.
Frequency: 1 optically-isolated input for speed
reference, such as MP3298 magnetic sensor.
one of our application specialists to see how best to
apply the EMS547. We have a growing library of
standard programs or we can write a program to your
specific needs.
Outputs:
Transistor: 7 digital; 125 mA sinking.
Applications
S449-1 Relay Board (Optional)*
:
●
●
●
●
●
●
●
●
●
Industrial Engines
Electric Motors
Compressors
Trucks
6 Dry Relay: 4 SPST, 5A @ 30 VDC, 250
VAC, 1/10 hp @ 120 VAC; 2 DPDT, 2A @
Generators
Pumps
220 VDC, 250 VAC ††
.
The EMS547 can be applied as an RTU to inter-
face between SCADA applications and other con-
trol platforms. It can also be used, in conjunction
with a Hayes compatible modem (9600 Baud), for
remote communications.
S449-3 Relay Board (Optional)*
:
Construction Equipment
Remote Cellular Sites
SCADA
2 Transistor digital: 125 mA sinking.
4 Relay: 2 SPST, 5A @ 30 VDC, 250 VAC,
1/10 hp @ 120 VAC; 2 DPDT, 2A @ 220
Specifications
VDC,250 VAC ††
.
Input Voltage: 10 to 28 VDC.
An external PC Card reader can be used with the
EMS547 to log data from flow meters, pressure
transmitters, electric gage senders, and other sens-
ing devices. This is a popular application in the
flood control market.
Shipping Weight: 2-1/4 lb. (1 kg.).
Operating Temperature: -4 to 149°F (-20 to
65°C).
Shipping Dimensions: 9-1/4 x 8-1/4 x 5-1/4 in.
(235 x 210 x 133 mm).
Storage Temperature: -4 to 149°F (-20 to 65°C).
Relative Humidity: 95%RH @ 60°C (140°F).
Operating data is displayed on a 32 character back lit
alphanumeric liquid crystal display. An on-board
real-time clock keeps a log of equipment running
hours and alerts you when to change oil, filters and
perform other routine service.
Warranty
Display: Alphanumeric: 2-line, 32 character
backlit LCD (standard); VFD optional.
A limited warranty on materials and workmanship
is given with this FW Murphy product. A copy of
the warranty may be viewed or printed by going to
Communications: 2–RS485, 2–RS232 ports.
Sensor Inputs:
Digital: 4 optically-isolated inputs, (positive volt-
age or ground) such as from Murphy SWICH-
GAGE® instruments.
The EMS547 operating parameters are configured
through a simple three-button interface. Access to the
system memory is controlled by entry codes.
†† One DPDT pole has common connected to battery+. N.O.
available fused and unfused.
**Not Class I, Division 2 approved.
A password-protected program uses built-in memory
to display the alarm/shutdown history, including a
display of the last ten shutdowns, when and why they
occurred, and displays all of the engine operating
conditions at time of last shutdown.
Analog: Up to 8 inputs–will accept a variety of
resistive sending units, such as from Murphy
electric gage senders. (When resistive sending
units are used, one input will be designated for
battery voltage sensing.)
Download from Www.Somanuals.com. All Manuals Search And Download.
|