parts Manual
MODEl sp2s20h
sElf-prOpEllED
prOfEssiOnal pavEMEnt saw
(hOnDa GX630rtXf2 GasOlinE EnGinE)
Revision #0 (02/17/2012)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
pn: 35524
Download from Www.Somanuals.com. All Manuals Search And Download.
silicOsis/rEspiratOry warninGs
WARNING WARNING
SILICOSIS WARNING
RESPIRATORY HAZARDS
Grinding/cutting/drilling of masonry, concrete, metal and
other materials with silica in their composition may give
off dust or mists containing crystalline silica. Silica is a
basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Repeated and/or
substantial inhalation of airborne crystalline silica can
cause serious or fatal respiratory diseases, including
silicosis. In addition, California and some other
authorities have listed respirable crystalline silica as a
substance known to cause cancer. When cutting such
materials, always follow the respiratory precautions
mentioned above.
Grinding/cutting/drilling of masonry, concrete, metal and
other materials can generate dust, mists and fumes
containing chemicals known to cause serious or fatal
injury or illness, such as respiratory disease, cancer,
birth defects or other reproductive harm. If you are
unfamiliar with the risks associated with the particular
process and/or material being cut or the composition of
the tool being used, review the material safety data
sheet and/or consult your employer, the material
manufacturer/supplier, governmental agencies such as
OSHA and NIOSH and other sources on hazardous
materials. California and some other authorities, for
instance, have published lists of substances known to
cause cancer, reproductive toxicity, or other harmful
effects.
Control dust, mist and fumes at the source where
possible. In this regard use good work practices and
follow the recommendations of the manufacturers or
suppliers, OSHA/NIOSH, and occupational and trade
associations. Water should be used for dust
suppression when wet cutting is feasible. When the
hazards from inhalation of dust, mists and fumes cannot
be eliminated, the operator and any bystanders should
always wear a respirator approved by NIOSH/MSHA for
the materials being used.
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
tablE Of cOntEnts
sp2s20h pavement saw
Proposition 65 Warning ........................................... 2
Silicosis/Respiratory Warnings................................ 3
Table Of Contents.................................................... 4
Parts Ordering Procedures...................................... 5
Explanation Of Code In Remarks Column............... 6
Suggested Spare Parts ........................................... 7
component Drawings
Nameplate and Decals Assembly......................... 8-9
Under Carriage Assembly ................................ 10-11
Blade Shaft Assembly ...................................... 12-13
Lifting Bale Assembly........................................ 14-15
Console Assembly............................................ 16-17
Engine Mount Assembly................................... 18-19
Engine Assembly.............................................. 20-21
Pointers and Covers Assembly......................... 22-23
Water System Assembly................................... 24-25
Blade Guard Assembly..................................... 26-27
Manual Raise and Lower Assy. (20-in.) ............ 28-29
Battery Assembly.............................................. 30-31
Transmission Engage Lever Assembly ............ 32-33
Hydrostatic Transmission Assembly ................ 34-35
Hydrostatic Drive Assembly.............................. 36-37
Terms and Conditions Of Sale — Parts................. 38
NOTICE
Specifications are subject to change without notice.
page 4 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
parts OrDErinG prOcEDurEs
Ordering parts has never been easier!
choose from three easy options:
Effective:
January 1st, 2006
Best deal!
order via internet (dealers only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
I View Parts Diagrams
I Order Parts
I Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% discount
on Standard orders for all orders which include
complete part numbers.*
order via Fax (dealers only):
All customers are welcome to order parts via Fax.
domestic (uS) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
domestic (uS) dealers Call:
order via phone:
1-800-427-1244
Non-dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
when ordering parts, please supply:
Ì
dealer account Number
Ì
Specify preferred Method of Shipment:
Ì
Ì
Ì
Ì
Ì
dealer Name and address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
I
I
Priority One
Ground
Shipping address (if different than billing address)
return Fax Number
I Next Day
Second/Third Day
applicable Model Number
I
Quantity, part Number and description of each part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
We aCCepT all MaJor CrediT CardS!
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
EXplanatiOn Of cODE in rEMarks cOluMn
The following section explains the different symbols and
QtY. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
Sample partS liSt
remarKS Column
NO. part NO. part Name
QtY. remarKS
Some of the most common notes found in the“Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
part NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“make/Obtain locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
page 6 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
suGGEstED sparE parts
Sp2S20h SaW WiTh hoNda gX630rTXF2
gaSoliNe eNgiNe
1 to 3 units
Qty.
3............15897...................................V-BELTS, DRIVE
p/N
description
1............07055-050 ...........................V-BELTS, TRANSMISSION
1............29013-001 ...........................WRENCH, BOX END 1-1/2 IN.
1............60087...................................ROPE, FRONT POINTER 1/4 IN.
2............15081...................................GRIPS, HANDLE BAR 1 IN.
1............06922-003 ...........................BLADE SHAFT NUT, RIGHT
1............07038-016 ...........................BLADE SHAFT NUT, LEFT
1............26928-004 ...........................OUTER BLADE FLANGE
3............17210Z6LP821575..............ELEMENT, AIR CLEANER
3............15400PLMA01PE................OIL FILTER
3............9807955876.........................SPARK PLUG
1............15229...................................CAP, W/GUAGE
1............35480Z6L003 ......................SWITCH, ASSY., OIL LEVEL
1............16910Z6L003 ......................STRAINER, FUEL
1............9820043000.........................FUSE, MINI, 30A
1............35110ZV5V50......................KEY, IGNITION
NOTICE
Part number on this Suggested Spare Parts list may
supersede/replace the P/N shown in the text pages of
this book..
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
naMEplatE anD DEcals
5
WARNING
7
To avoid injury,
you MUST read
and understand
operator’s manual
before using this
machine.
P/N 36099
This machine to
be operated by
qualified
3
6
personnel only.
Ask for training
as needed.
P/N 35137
BLADE
LOWER
RAISE
35136
22D
22C
4
HOT
2
LIFTING POINT
UNLEADED GASOLINE
ONLY
MAX 10% ETHANOL
WARNING
8
22
A
T
T
I
O
O
N
R
KEEP HANDS
CLEAR
13
A
9
CLOCKWISE
BELT DRIVE
1
10
CAUTION
When Larger Blade and Guard
is Installed, Belt Drive MUST
Be Changed to Proper Size.
See Owners Manual.
GEAR DRIVE GEAR DRIVE
FAILURE TO COMPLY COULD RESULT
IN SERIOUS BODILY INJURY.
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
B
C
A
T
22A
22B
T
I
O
O
N
R
CHECK
CHECK
BELT DRIVE
LUBRICATION
14
22E
22E
COUNTER
CLOCKWISE
LUBRICATION
HOT
CHECK
12
114
D
E
LIFTING POINT LIFTING POINT
8
11
WARNING
CAUTION
17
When Larger Blade and Guard
is Installed, Belt Drive MUST
Be Changed to Proper Size.
See Owners Manual.
LUBRICATION
LUBRICATION
1
FAILURE TO COMPLY COULD RESULT
IN SERIOUS BODILY INJURY.
15
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
KEEP FEET
CLEAR
LUBRICATION
LUBRICATION
ENGAGE
18
16
DRIVE
LEVER
21
DECAL SHEET
INTL STDS ISO
P/N 11246
DISENGAGE
19
P/N 35135
RECOMMENDED MAINTENANCE
LUBRICATE
CLEAN
CHECK
ENGINE OIL
BELT TENSION
AIR CLEANER
(WHEN CUTTING DRY)
DAILY:
SPINDLE BEARINGS
ALL BEARINGS
SUBFRAME PIVOT
REAR AXLE
JACK SHAFT
HANDWHEEL
(IF SO EQUIPPED)
FUEL STRAINERS
FILTERS
OCCASIONALLY:
HYDROSTATIC
TRANSMISSION OIL
AIR CLEANER
WATER PUMP
INLET STRAINER
HYDRAULIC LIFT
SYSTEM RESERVOIR
(IF SO EQUIPPED)
CLEVIS PINS
ROLLER CHAINS
FRONT WHEEL BEARINGS
LIFT MECHANISM
SCREW
COMPLETE MACHINE
(IF SO EQUIPPED)
23596-001
8
9
20
8
MODEL
SERIAL NO.
page 8 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
naMEplatE anD DEcals
No.
1
2
3
4
5
6
7
8
parT No.
23330-001
25249-001
22122-001
23587
35137
35136
36099
20525
38213
38224
35308
13118
25678
25491
25867
25260-001
28853-001
29736
parT NaMe
QTY.
reMarKS
DECAL, CAUTION, BELT GUARD
DECAL, WARNING, KEEP HANDS CLEAR
DECAL, WARNING, SERIOUS INJURY
DECAL, UNLEADED GASOLINE ONLY
DECAL, WARNING, READ MANUAL
DECAL, BLADE RAISE/ LOWER
DECAL, PROTECTIVE CLOTHING
DECAL, PROP. 65, 3.25" X 4.25"
DECAL, MQ MULTIQUIP
DECAL, SP2, BLACK 5" X 3"
DECAL, GUARANTEED SOUND PWR. 114 DB. 1
DECAL, POWDER COATED
DECAL, CCW BLADE ROTATION
DECAL, CW BLADE ROTATION
DECAL, ROTATION DISPLACEMENT
DECAL, WARNING, KEEP FEET CLEAR
DECAL, FORWARD/REVERSE LEVER
DECAL, THROTTLE
DECAL, RECOMMENDED MAINTENANCE
NAMEPLATE......................................................1................CONTACT MQ PARTS DEPT.
DRIVE LEVER
DECAL, BELT DRIVE
DECAL, CHECK OIL LEVEL
DECAL, HOT
DECAL, LIFTING POINT
DECAL, LUBRICATION
2
1
1
1
1
1
1
1
5
2
9
10
11
12
13
14
15
16
17
18
19
20
21
22A
22B
1
1
1
1
1
1
1
1
23596-001
35135
11246
11246
1
1
1
1
1
2
22C 11246
22D 11246
22E
11246
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
unDEr carriaGE assy.
1
2
4
6
13
6
14
8
9
7
10
10
6
11
12
3
6
8
5
page 10 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
unDEr carriaGE assy.
No.
1
2
3
4
parT No.
28777-352
28781-002
28782-351
28086-001
28085-001
8151
parT NaMe
FRAME ASSY. 16”/18”/20”
AXLE, REAR
FRAME, UNDERCARRIAGEE ASSY.
WHEEL, 8 X 2 .75 ROLLER BEARING REAR
WHEEL, 5 X 2 .75 ROLLER BEARING FRONT
WASHER, FLAT SAE 3/4
QTY.
1
1
1
2
reMarKS
5
6
2
8
7
8
9
10
11
12
13
14
10065-090
25181-001
8081
0447
2219
25490
2621
1162 A
BEARING PLAIN
2
4
1
4
1
2
1
1
COLLAR, SET 0.75 X 1.50 X .50, SPLIT
PIN, CLEVIS 1/2 X 2-3/4
WASHER, FLAT SAE 1/2
PIN, COTTER 1/8D X 1
SCREW, SHS 5/16-18 X 3/8
ZERK, GREASE STR. 1/4-28
CAP, ZERK FITTING
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
blaDE shaft assy.
8
9
7
4
3
ENGINE PULLEY
20
5
2
2
15
1
16
11
17
6
LUBRICATION
POINT
15
13
18
12
16
LUBRICATION
POINT
19
14
page 12 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
blaDE shaft assy.
No.
1
2
3
4
5
6
7
8
parT No.
28807-002
28081-001
28811-002
26928-004
0125
parT NaMe
SPINDLE, BLADE
BEARING, PILLOW BLK 1.25ID AS206-20
FLANGE, BLADE INSIDE 4.0OD X 1.0ID
FLANGE, BLADE OUTSIDE 1.0ID X4.0OD X 56 1
KEY, WOODRUFF #15
KEY, 1/4”SQ. X 2”, 1018 STOCK
NUT, HEX JAM LH 1-14 PLATED
SCREW, HHC 7/16-14 X 1-1/2
WASHER, LOCK 7/16 ZINC
WASHER, FLAT SAE 7/16
QTY.
reMarKS
1
2
1
1
1
1
4
4
4
6059 B
06922-003
06502-012
2955
0448
35447
1528
28841-001
0424
2621
1162 A
15897
9
10
11
12
13
14
15
16
17
18
19
20
PULLEY, BLADE SHAFT, 4F3V412X1.25 .........1................4 GROOVE
SCREW, SHS
2
1
3
2
2
4
1
1
1
BUSHING, SPLIT TYPE
SCREW, 1/4-20 X 1-1/4
ZERK FITTING
CAP,GREASE ZERK, #2 RED
V-BELT, 3V x 355
SPACER, SPINDLE
23250-002
07038-016
24894-024
NUT, HEX JAM 1”-14 PLATED
PIN, DOWEL 3/8 x 1-1/4 LG
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
liftinG balE assy.
1
5
2
5
6
6
4
3
page 14 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
liftinG balE assy.
No.
1
2
3
4
parT No.
28890-351
28893-002
22106
10133
49071
9091
parT NaMe
LIFT BALE
BRACE, LIFT BAIL
SCREW, HHFS 3/8-16 X 1-1/4
NUT, NYLOC 3/8-16
QTY.
reMarKS
1
1
2
2
2
2
5
6
NUT, FLANGED SERRATED PLTD 5/16-18
SCREW, HHFS 5/16-18 X 1 GR5
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
cOnsOlE assy.
5
7
4
3
1
13
2
3
16
15
12
9
14
3
12
9
8
page 16 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
cOnsOlE assy.
No.
1
2
parT No.
28796-351
15081
parT NaMe
HANDLE ASSY.
GRIP, 1” ID
QTY.
1
2
reMarKS
3
4
5
6
7
8
9
12
13
14
15
16
38274
1475
35127
28091-401
35299
28834-001
19266
49048
SCREW, HHC 3/8-16 X .75
CONNECTOR SPLICE TAP
SWITCH, KILL MAGURA
SHIFT CONTROL ASSY.
SCREW, PHP M4-0.7X25MM
COVER, REAR
NUT, BLIND 1/4-20X.27-165
SCREW, HHFS 1/4-20 X 3/4 GRD 5
HARNESS, FCG KILL SWITCH
HOUSING ASSY.
4
1
1
1
2
1
8
4
1
1
1
1
35155
28791-351
28805-001
29013-001
COVER, CONSOLE SIDE
WRENCH, BOX END 1 1/2
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
EnGinE MOunt assy.
6
7
4
2
9
3
2
7
5
2
8
2
5
1
page 18 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
EnGinE MOunt assy.
No.
1
2
3
4
5
6
7
8
parT No.
15868-032
0447
968011
10176
3214
parT NaMe
QTY.
reMarKS
SCREW, SQHS 1/2-13 X 4, CUP PLAIN
WASHER, FLAT SAE 1/2
NUT, HEX FINISH 1/2-13
NUT, NYLOC 1/2-13
SCREW, HHC 1/2-13 X 1-1/4
SCREW, HHC 3/8-16 X 1- 3/4
WASHER, FLAT SAE 3/8
NUT, NYLOC 3/8-16
1
9
1
4
4
4
8
4
1
9154
10136
10133
35507
9
ENGINE BASE ASSY.
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
EnGinE assy.
11
15
7
12
13
8
6
18
19
TO FUEL
PUMP
9
14
5
4
3
6
7
10
20
21
17
2
34
33
22
16
26
23
24
25
1
27
28
30
32
35
31
29
36
38
37
39
3
5
42
NOTES:
SEE BLADE SHAFT
ASSY., ITEM 11
43
41
44
1
SEE BLADE SHAFT
ASSY., ITEM 17
2
SEE HYDROSTATIC DRIVE
ASSY., ITEM 14
3
4
45
4
SEE HYDROSTATIC DRIVE
ASSY., ITEM 15
40
46
SEE HYDROSTATIC DRIVE
ASSY., ITEM 25
2
5
6
1
ITEM 5, FWD/REV CONTROL
LEVER INCLUDES CABLE
ITEM 3, SPEED CONTROL
LEVER INCLUDES 50 IN.
(1270 MM.) CABLE
7
page 20 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
EnGinE assy.
No.
1
2
3
4
5
6
7
parT No.
12277
35110ZV5V50
15168
10024
28091-401
0948
0131 A
parT NaMe
CLAMP, HOSE WORM #36, 1-13/16 X 2-3/4
KEY, IGNITION
HANDLE, CONTROL, W/KNOB AND CABLE............1 ....SPEED CONTROL
NUT, NYLOC 1/4-20
HANDLE, CONTROL, W/KNOB AND CABLE............1 ....FWD./REV.
QTY. reMarKS
2
2
4
WASHER, FLAT SAE 1/4
SCREW, HHC 1/4-20 X 3/4
4
4
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
2
1
1
2
1
1
2
1
1
2
1
1
2
1
2
1
1
1
1
2
2
2
1
8
9
35280
CABLE, CHOKE CONTROL 35 IN.
FUSE, MINI, 30 AMP
9820043000
35100Z6L003
60004
23508
23507
35503
2712
23505
60028
950024100008
16850Z6L000
16910Z6L003
60013
22082
12464
9501858320
17251Z6L810
17320Z6LH001377
9501858320
17300Z6LP522958
17210Z6LP821575
957010601600
35480Z6L003
91309Z6L000
2299
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
39
41
42
43
44
45
46
SWITCH ASSY., COMBINATION
HOSE,FUEL .187 D 50PSI LOW PERM
VALVE, ROLL OVER, STD CP
GROMMET, ROLL OVER VALVE
FUEL TANK W\A, 20 HON SP2
CAP, W/GAUGE 7.5", "UNLEADED", EPA
CANISTER, CARBON, 390CC
HOSE,FUEL .312 D 50PSI LOW PERM.
CLAMP, TUBE (D10)
TUBE COMP. A. FUEL
FILTER, FUEL
HOSE,FUEL .250 D 50PSI LOW PERM.
FITTING, BRASS 90 4BARB -1/4MP
SCREW, HHC M6-1.0 X 16 MM
BAND AIR CLEANER CONNECTING TUBE
TUBE, AIR CLEANER CONNECTING
RAIN CAP
BAND A/C CONNECTING TUBE
VACUATOR VALVE
AIR FILTER ELEMENT
BOLT, FLANGE, 6X16
SWITCH, ASSY., OIL LEVEL
O-RING 37.9 X 2.4
SCREW, HHC M8-1.25 X 16MM
MUFFLER KIT, GX630 HI LEFT, HONDA VHLM
MOUNT, FUEL TANK W/A, SP2 20 HONDA
NUT, BLIND 1/4-20 X .027-.165
ENGINE, HONDA 20HP GX630RTXF2
SCREW, HHFS 1/4-20 x 3/4 GR5
PIPE PLUG
35522
35517
19266
35518
49048
17300Z6LP522840
31200Z6L003
6059 B
35513
0161 C
MOTOR ASSY., STARTER
KEY 1/4" SQ. X 2, 1018 STOCK
BRACKET, IDLER SPRING
WASHER, LOCK 5/16 MED
SCREW, HHC 5/16-24 x 3/4 PLATED
FILTER, OIL
16105
15400PLMA01PE
35446
PULLEY, ENG. 43V26/A30 X 1-1/8" 5 GROOVE
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
pOintErs anD cOvErs assy.
11
9
11
9
22
22
23
24
9
21
9
9
15
20
12
7
7A
20
8
1
6
4
13
9
5
12
3
2
10
13
14
19
9
16
page 22 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
pOintErs anD cOvErs assy.
No.
1
2
3
4
parT No.
28646-351
28649-001
28648-001
28647-001
1456
parT NaMe
QTY.
reMarKS
BLADE GUIDE WELDMENT
SPANNER BUSHING CSI
WHEEL, 3.00 X 1.25 .50 ID POLY CSI
POINTER
NUT, HEX FINISH 3/8-16
NUT, NYLOC 3/8-16
SASH, ASSY......................................................2................INCLUDES ITEMS W/%
SLEEVE, SASH
ROPE, 1/4” NYLON, BRAIDED, WHITE 8' ........1................8 FT. REQUIRED
SCREW, HHFS 5/16-18 X 3/4 GR5
NUT, FLANGED 5/16-16 X 1-1/4" GR. 5
PALNUT, U, 5/16-18 X .05/.20 PANEL
WASHER, FLAT SAE 3/8
1
1
1
1
2
2
5
6
10133
15830
7
7A% 15114
8%
9
2
60087
36720
49071
35358
10136
0166 A
0205
35511
28835-001
29745-554
1023
9
1
3
4
2
3
1
1
1
7
1
3
2
1
10
11
12
13
14
15
16
19
20
21
22
23
24
WASHER, LOCK 3/8 MED.
SCREW, HHC 3/8-16 X 1.0
BELT GUARD, SP2 20 HONDA
GUARD, PULLEY
SPINDLE GUARD ASSY. - RED
SCREW, HHC 3/8-16 X 1-1/4 GR5
GUARD, BELT
SCREW HHFS 1/4-20X3/4 GR.5
NUT, "U" TYPE, 1/4-20
NUT, FLANGED 1/4-20 SERRATED PLTD
35509
49048
11534
49070
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
watEr systEM assy.
13
11
1
16
10
12
17
6
A
14
15
8
7A
9
7
1
CONNECT
WATER SOURCE
HERE
A
2
5
2
4
1
3
NOTES:
INCLUDED WITH
ITEM 4
1
2
INCLUDED WITH
ITEM 6
page 24 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
watEr systEM assy.
No.
1
2
3
4
5
6
7
7A
8
parT No.
12694-008
60088
23566-001
23259-001
23254-001
2399
parT NaMe
QTY.
reMarKS
HOSE CLAMP, SPRING TYPE 7/8 O.D HOSE
HOSE, PVC BRAIDED .5 I.D. X .75 O.D.
FITTING, PLASTIC 90 1/2MP X 1/2BARB
VALVE, BALL 1/2 MPT BRASS NIBCO T585-70
FITTING, NIPPLE 1/2MP X 2 GALV.
U-BOLT 1" I.D. PLTD. W/NUTS
FITTING, BRASS 1/2FP-3/4F GRDN., STR
WASHER, GARDEN HOSE
FITTING, BRASS 1/2 BARB X 3/4 GRDN
TIE, CABLE TY-RAP BLACK
TRIM, WATER TANK RUBBER
4
1
1
1
1
1
1
1
1
2
1
15544
13336-001
24778-001
1662
28861-501
28089-001
60002
28862-001
28860-001
1579
28089-002
0181 B
9
10
11
12
13
14
15
16*
17
TANK, WATER ASSY., 5 GAL. .....................................1........... INCLUDES ITEM W/ *
HOSE, PVC CLEAR, .375 X .5 X 1.58"
CORD, TANK RETAINER
KNOB
HHCS 1/4-20 x 1/2
VALVE, WATER TANK (SPIGOT ONLY)
WASHER, LOCL 1/4" MEDIUM
2
1
1
1
1
1
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
blaDE GuarD assy.
8
19
6
3
3
7
10
14
13
12
9
15
11
17
18
4
16
17
15
18
2
15
5
1
page 26 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
blaDE GuarD assy.
No.
1
2
parT No.
29406-354
28729-002
60021
parT NaMe
BLADE GUARD ASSY., SP20".....................................1........... SAFETY ITEM
GUARD, SPLASH BLADE
HOSE, 3/8ID X 5/8 OD BRAIDED PVC “PAC”..............3........... 1 PIECE = 1FT.
QTY.
reMarKS
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
49048
10024
SCREW, HHFS 1/4-20 X 3/4 GR5
NUT, NYLOC 1/4-20
2
2
1
2
1
2
2
1
4
4
4
6
1
2
2
1
14233-004
12694-006
24778-001
18626-001
22129-001
21168
0424
0949
0181 B
0948
FITTING, PLASTIC Y 6 BARB USP 64016
HOSE CLAMP, SPRING TYPE 3/4 O.D. HOSE
FITTING, BRASS 1/2BARB X 3/4F GRDN
SPRING TENSION, GUARD BLADE
PIPE STRAP 3/8
SCREW, HHC 3/8-16 X 4.75
SCREW, HHC 1/4-20 X 1 1/4
NUT, HEX FINISH 1/4-20 PLATED
WASHER, LOCK 1/4 MED.
WASHER, FLAT SAE 1/4
38274
0166 A
10136
28876-001
SCREW, HHFS 3/8-16 X .75 ZINC
WASHER, LOCK 3/8 MED.
WASHER, FLAT SAE 3/8
FITTING, BRASS 3/8BARBx 3/4M GRDN
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual raisE anD lOwEr assy. (20 in.)
8
6
16
11
15
7
9
17
B
5
14
9
4
13
3
LUBRICATION
POINT
1
2
12
page 28 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual raisE anD lOwEr assy. (20 in.)
No.
1
2
3
4
parT No.
28793-352
2621
28806-001
28083-001
28809-001
4568
parT NaMe
JACKPOST ASSY.
ZERK, GREASE STR. 1/4-28
JACKSCREW
BEARING, FLANGE
QTY.
1
1
1
1
reMarKS
5
6
SPACER, JACKSCREW
PIN, ROLL 3/16 X 1
1
1
7
8
9
11
12
13
14
15
16
17
28877-351
49048
0948
SCREW COVER ASSY., RED
SCREW, HHFS 1/4-20 X 3/4 GR5
WASHER, FLAT SAE 1/4
SCREW, HHC 1/4-20 X 1
CAP,GREASE ZERK, #2
NUT, NYLOC 1/4-20
SCREW, HHC 3/8-16 X 2 3/4
NUT, HEX JAM 3/8-16 CLASS 2B
KNOB, SHIFT
1
3
4
2
1
2
1
1
0424
1162 A
10024
1121
1876
4403
1
1
28808-002
ARM-CRANK
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
battEry assy.
9
5
8
6
1
3
1
2
4
10
NOTES:
INCLUDED WITH
ITEM 3
1
page 30 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
battEry assy.
No.
1
2
3
4
5
6
7
8
parT No.
4671
parT NaMe
BATTERY, WET GR.U1, GT-X GOLD LA
BRACKET BATTERY
BATTERY HOLD DOWN KIT 425-405
CABLE, BATTERY POS 6GA X 42” RING TONGUE
STRAP, GROUND
SCREW, HHFS 1/4-20 X 3/4 GR5
NUT, BATTERY DISCONNECT
NUT, FLANGED SERRATED PLTD. 1/4-20 X 3/4
SCREW, HHFS 5/16-18 X 3/4 GR5
NUT, FLANGED SERRATED PLTD. 5/16-18
QTY.
reMarKS
1
1
1
1
1
2
1
2
3
3
28096-001
28095-401
28093-001
28094-001
49048
49070
0949
36720
49071
9
10
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
transMissiOn EnGaGE lEvEr assy.
2
1
10
6
7
5
8
5
6
9
3
4
13
14
7
11
12
6
page 32 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
transMissiOn EnGaGE lEvEr assy.
No.
1
2
parT No.
28825-351
3360
parT NaMe
LEVER ASSY. TRANS. ENGAGE
GRIP, 1/4 X 1 BLACK
QTY.
1
1
reMarKS
3
4
5
6
36720
0655
10136
6014 B
5291
MOUNT ASSY., LEVER RED
SCREW, HHFS 5/16-18 X 3/4 GR5
WASHER, FLAT SAE 3/8
PIN, COTTER 3/32D X 1.0
PIN, CLEVIS 3/8
1
4
6
1
7
2
8
9
0300 B
49071
08326-019
2199
08327-012
28830-001
28819-351
WASHER, FLAT SAE 5/16
NUT, FLANGED SERRATED PLTD 5/16-18
PIN, CLEVIS 3/8 X 2” USEABLE LENGHT
NUT, HEX JAM 3/8-24
YOKE END, 3/8-24 X 2.50
ROD, TRANS. ENGINE
TRANS. BRACKET ASSY.
2
8
1
2
2
1
1
10
11
12
13
14
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
hyDrOstatic transMissiOn assy.
1
3
2
2
4
5
17
16
18
5
15
6
1
14
8
19
8
7
13
11
9
8
12
4
5
4
NOTES:
FORWARD/REVERSE CABLE ASSY.
INCLUDED WITH SHIFT CONTROL
LEVER ITEM 5, ENGINE ASSY.
1
page 34 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
hyDrOstatic transMissiOn assy.
No.
1
2
3
4
5
6
7
8
parT No.
20559-001
1493
28836-001
10133
10136
1023
15354
1578
4001
parT NaMe
QTY.
1
4
1
6
7
2
1
2
4
4
1
2
1
1
2
2
reMarKS
SPRING, EXT. 3.38FL X 71OD X .105
SCREW, HHC 3/8-18 X 3.25
LINK, RETURN SPRING
NUT, NYLOC 3/8-16
WASHER, FLAT SAE 3/8
SCREW, HHC 3/8-16 X 1 1/4 GR 5
TRANSMISSION, HYD EATON
KEY, WOODRUFF #3
WASHER, FLAT USS 3/8 PLD
NUT, HEX FINISH 3/8-16
SHIFT ARM ASSY.
PIN, PIVOT
SCREW, SHS 10-32 X 1/4
CAP, TRANSMISSION
9
10
11
12
13
14
15
16
17
18
19
1456
28828-351
28829-001
10450
103530-000
923199
15173
13287
2584
35525
SCREW, SHC 8-32 X 1-1/4
WASHER, FLAT, #8
NUT, NYLOC 8-32
SWITCH, PUSH BUTTON
HARNESS, NEUTRAL SWITCH, SP2S20H
2
1
1
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
hyDrOstatic DrivE assy.
1
3
4
1 26
27
2
1
12
1 26
13
7
6
7
27
8
10
5
18
9
12
18
11
25
1 26
28
20
14
18
15
17
16
19
23
22
21
NOTES:
APPLY BLUE LOCTITE #242
P/N 60091
1
page 36 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
hyDrOstatic DrivE assy.
No.
1
2
3
4
5
6
7
parT No.
23227-001
25039
19371-023
10504-035
49071
parT NaMe
QTY.
1
2
1
1
2
1
3
reMarKS
SPROCKET, TRANSMISSION 12 TOOTH MACH
SCREW, SHS 10-24 X 1/4
CHAIN, ROLLER ANSI STANDARD
LINK, CHAIN
NUT, FLANGED SERRATED PLTD, 5/16-18
SPROCKET, 3548 X 3/4
KEY, WOODRUFF #9
28084-001
0126
8
9
28832-001
23284-001
25354
9091
28831-001
1578
28087-001
25682-001
1665
10136
10133
23303-001
23230-001
1284
18574-004
28864-001
07055-051
0130 A
JACKSHAFT
1
2
1
2
2
3
1
1
1
1
3
1
1
1
1
1
BEARING, FLANGE .34SQ x 3/4ID
SCREW, SHS 1/4-20 X 1/2 HOLOKROME
SCREW, HHFS 5/16-18 X 1 GR5
GEAR, DRIVE
KEY, WOODRUFF #3
PULLEY, MA60 X 17MM
IDLER PULLEY
SCREW, HHC 3/8-16 X 2
WASHER, FLAT SAE 3/8
NUT, NYLOC 3/8-16
IDLER ARM
SPRING EXT. IDLE
SCREW, HHC 3/8-16 X 1 1/2
WASHER, BELLEVILLE 3/8
WASHER, FIBRE
V-BELT, TRANSMISSION 4L510
SCREW, SHS 1/4 X 20 X 1/4
LOCTITE, BLUE #242
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
1
4
1
1
60091
1456
NUT, HEX FINISH 3/8-1
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
tErMs anD cOnDitiOns Of salE — parts
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
paYMeNT TerMS
Terms of payment for parts are net 30 days.
FreighT poliCY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SpeCial eXpediTiNg SerViCe
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
liMiTaTioNS oF Seller’S liaBiliTY
MiNiMuM order
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
reTurNed goodS poliCY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
liMiTaTioN oF WarraNTieS
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
priCiNg aNd reBaTeS
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
page 38 — Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
nOtEs
Sp2S20h paVeMeNT SaW • operaTioN aNd parTS MaNual — reV. #0 (02/17/12) — page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
parts Manual
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
United StateS
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: [email protected]
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Service Department
Warranty Department
800-421-1244
310-537-3700
Fax: 310-537-4259
Fax: 310-943-2238
800-421-1244
310-537-3700
Fax: 310-943-2249
Technical Assistance
800-478-1244
mexico
United Kingdom
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: [email protected]
Tel: (52) 222-225-9900
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: (52) 222-285-0420 Globe Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: [email protected]
Fax: 0161 339 3226
Canada
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: [email protected]
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2012, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Whiteman logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other
trademarks are the property of their respective owners and used with permission.
This manual MUsT accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
pn: 35524
Download from Www.Somanuals.com. All Manuals Search And Download.
|