PARTS MANUAL
STAY-LEVEL HANDLEBAR SERIES
MODELS
PS706016
PS706020
PS706026
PS706030
PS706036
PAVEMENT SAW
(DEUTZ BF3L2011 DIESEL ENGINE)
Revision #8 (07/26/10)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.
P/N 37558
Download from Www.Somanuals.com. All Manuals Search And Download.
SILICOSIS/RESPIRATORYWARNINGS
WARNING WARNING
SILICOSIS WARNING
RESPIRATORY HAZARDS
Grinding/cutting/drilling of masonry, concrete, metal and
other materials with silica in their composition may give
off dust or mists containing crystalline silica. Silica is a
basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Repeated and/or
substantial inhalation of airborne crystalline silica can
cause serious or fatal respiratory diseases, including
silicosis. In addition, California and some other
authorities have listed respirable crystalline silica as a
substance known to cause cancer. When cutting such
materials, always follow the respiratory precautions
mentioned above.
Grinding/cutting/drilling of masonry, concrete, metal and
other materials can generate dust, mists and fumes
containing chemicals known to cause serious or fatal
injury or illness, such as respiratory disease, cancer,
birth defects or other reproductive harm. If you are
unfamiliar with the risks associated with the particular
process and/or material being cut or the composition of
the tool being used, review the material safety data
sheet and/or consult your employer, the material
manufacturer/supplier, governmental agencies such as
OSHA and NIOSH and other sources on hazardous
materials. California and some other authorities, for
instance, have published lists of substances known to
cause cancer, reproductive toxicity, or other harmful
effects.
Control dust, mist and fumes at the source where
possible. In this regard use good work practices and
follow the recommendations of the manufacturers or
suppliers, OSHA/NIOSH, and occupational and trade
associations. Water should be used for dust
suppression when wet cutting is feasible. When the
hazards from inhalation of dust, mists and fumes cannot
be eliminated, the operator and any bystanders should
always wear a respirator approved by NIOSH/MSHA for
the materials being used.
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
PS7060 SERIES SAWS
Proposition 65Warning .................................................. 2
Silicosis/RespiratoryWarnings ...................................... 3
Table of Contents........................................................... 4
Parts Ordering Procedures ............................................ 5
Explanation of Code in Remarks Column ...................... 6
Suggested Spare Parts ................................................. 7
Nameplates and Decals ............................................. 8-9
Control Panel Decals .............................................. 10-11
Electrical Control Assembly ................................... 12-13
Console Mounts Assembly..................................... 14-15
Rear Console Access Panel Assembly .................. 16-17
Light Connector/Dash Access Assembly ............... 18-19
Belt and Engine Guards Assembly......................... 20-21
Depth Indicator/Stop Switch Assy. (Old Style) ....... 22-23
Depth Indicator/Stop Switch Assy. (New Style) ...... 24-25
F-N-R Assembly ..................................................... 26-27
Fuel Assembly ....................................................... 28-29
Battery Assembly ................................................... 30-31
Stay-Level Handlebars Assembly .......................... 32-33
Handlebar Boot Assembly ...................................... 34-35
Water System Assembly ........................................ 36-37
Engine Assembly ................................................... 38-39
Throttle Control Assembly ...................................... 40-41
Engine Mounts Assembly ...................................... 42-43
Air Cleaner Assembly ............................................. 44-45
Muffler Assembly ................................................... 46-47
Lift Bail Assembly .................................................. 48-49
Platform Guards/Rear Pointer Assembly ................ 50-51
Wheel Drive Assembly ........................................... 52-53
Front Axle Assembly .............................................. 54-55
Hydraulic System Assembly .................................. 56-57
Engine Pivot Cylinder Assembly ............................ 58-59
Hydraulic Hoses Assembly .................................... 60-61
Hydraulic Fttings and Clamps Assembly................ 62-63
Front Pointer Assembly .......................................... 64-65
Belt Drive Assembly............................................... 66-69
Drive Pulley Assembly ........................................... 70-71
Bladeshaft Assembly ............................................. 72-73
16", 20", 26" Bladeguard Assembly ...................... 74-75
30", 36" Bladeguard Assembly .............................. 76-77
Optional Weight Kit Assembly ................................ 78-79
NOTICE
Specification and part number are subject to change
without notice.
Terms and Conditions of Sale — Parts........................ 80
PAGE 4 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only)
Order parts on-line using Multiquip’s SmartEquip website!
:
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
N View Parts Diagrams
N Order Parts
N Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only)
:
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
Order via Phone:
1-800-427-1244
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
R
Dealer Account Number
R
Specify Preferred Method of Shipment:
R
R
R
R
R
Dealer Name and Address
ꢀ UPS/Fed Ex
ꢀ DHL
ꢀ Truck
N
N
Priority One
Ground
Shipping Address (if different than billing address)
Return Fax Number
N Next Day
Second/Third Day
Applicable Model Number
N
Quantity, Part Number and Description of Each Part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
QTY. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SAMPLE PARTS LIST
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
PAGE 6 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED SPARE PARTS
SS7060 SANDERS SAW
ENGINE PARTS FOR DEUTZ TURBO DIESEL ENGINE
2 ....... 1174416 .............. OIL FILTER, DEUTZ BF3L2012
2 ....... 304010 ................ FUEL FILTER, DEUTZ BF3L2011
2 ....... P772579 .............. PRIMARY AIR FILTER ELEMENT
2 ....... P775300 .............. SAFETY AIR FILTER, DEUTZ BF3L2014
2 ....... 21004-003 ........... FAN BELT, AX-35
2 ....... 520007 ................ DRIVE BELT, 5G 3VX-530
1 ....... 406017 ................ IGNITION SWITCH, W/KEY
2 ....... 406017-1 ............. KEY, IGNITION
1 TO 3 UNITS WITH DEUTZ TURBO DIESEL ENGINE
Qty. P/N
Description
1 ....... 37094 .................. SWITCH, TOGGLE F-N-R
1 ....... 37203 .................. SWITCH, ROLLER PLUNGER
2 ....... 406000 ................ SWITCH, ROCKER
2 ....... 37132 .................. FRONT WHEEL ASSEMBLY
2 ....... 37095 .................. REAR WHEEL
2 ....... 306006 ................ FILTER, TRANSMISSION
1 ....... 29509 .................. CAP, FUEL TANK
2 ....... 560017 ................ GRIPS, HANDLEBAR
1 ....... H9406 .................. BULB, GE H9406
1 ....... 15503 .................. KNOB, COMFORT
1 ....... 37311 .................. BALLVALVE, WATER SYSTEM
2 ....... 570005 ................ CLAMP, MUFFLER
2 ....... 37048 .................. SPRING, WHEEL DRIVE
2 ....... 582012 ................ BUSHING, QD
2 ....... 915316 ................ SCREW, 5/8 - 11 X 3 LH GR8
2 ....... 915315 ................ SCREW, 5/8 - 11 X 3 GR8
1 ....... 574003 ................ ROPE, POINTER
1 ....... 37212 .................. THROTTLE ASSEMBLY
2 ....... 200019 ................ MUDFLAP, BLADEGUARD
FOR SAWS WITH 16", 20", AND 26" BLADEGUARDS
2 ....... 37168 .................. FLANGE, INNER 5.0"
2 ....... 37169 .................. FLANGE ASSEMBLY, OUTER 5.0"
2 ....... 926790 ................ PIN, DOWEL
2 ....... 362000 ................ HOSE, WATER #6LP (16" BLADEGUARD)
2 ....... 362005 ................ HOSE, WATER #6LP (20" BLADEGUARD)
2 ....... 362006 ................ HOSE, WATER #6LP (26" BLADEGUARD)
FOR SAWS WITH 30" AND 36" BLADEGUARDS
2 ....... 37177 .................. FLANGE, INNER 6.0"
2 ....... 37176 .................. FLANGE ASSEMBLY, OUTER 6.0"
2 ....... 926790 ................ PIN, DOWEL
2 ....... 362007 ................ HOSE, WATER #6LP (30" BLADEGUARD)
2 ....... 362008 ................ HOSE, WATER #6LP (36" BLADEGUARD)
NOTICE
Part numbers on this Suggested Spare Parts List may
supercede/replace the P/N's shown in the text pages of this
manual.
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMEPLATES AND DECALS
NAMEPLATES AND DECALS
PAGE 8 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMEPLATES AND DECALS
NAMEPLATES AND DECALS
NO.
1
2
PART NO.
37362
20936
PART NAME
QTY.
REMARKS
DECAL, STAY LEVEL HANDLE WHITE
DECAL, MQ MULTIQUIP 5.93 X 7.45
DECAL, MQ PS7060
2
2
2
3
37365
4
5
6
SERIAL TAG ............................................................ 1 .................. CONTACT PARTS DEPT.
M600002
25482
DECAL, DIESEL FUEL ONLY
DECAL, MQ LOGO 3.0 X 3.75
1
1
7
8
37161
13118
DECAL, HOT ISO HI-TEMPERATURE .................... 1 .................. SAFETY ITEM
DECAL, POWDER COATED
1
9
20525
36092
36090
11912
25282
35137
36099
37540
DECAL, WARNING "PROP 65" 3.25 X 4.25 ............ 1 .................. SAFETY ITEM
DECAL, WARNING DIESEL FUEL 3.5 X 1.75 ......... 1 .................. SAFETY ITEM
DECAL, WARNING VENTILATION 2 X 4 ................. 1 .................. SAFETY ITEM
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DECAL, PATENT PENDING
1
DECAL, ATTENTION BATTERY DISCONNECTED 1
DECAL, WARNING READ MANUAL ........................ 1 .................. SAFETY ITEM
DECAL, PROTECTIVE CLOTHING ISO BLUE ........ 1 .................. SAFETY ITEM
DECAL, HYDRAULIC RESERVOIR
1
21302
DECAL, WARNING KEEP GUARDS IN PLACE ...... 2 .................. SAFETY ITEM
DECAL, WARNING RX-W ........................................ 2 .................. SAFETY ITEM
DECAL, WARNING KEEP HANDS CLEAR ............. 2 .................. SAFETY ITEM
DECAL, WARNING KEEP FEET CLEAR ................ 2 .................. SAFETY ITEM
DECAL, BLADE ROTATION CCW ............................ 1 .................. SAFETY ITEM
22122-001
25249-001
25250-001
25678
23330-001
606004
25491
DECAL, CAUTION BELT DRIVE
2
DECAL, GUARD REMOVAL..................................... 2 .................. SAFETY ITEM
DECAL, BLADE ROTATION CW
DECAL, CE
1
1
11092
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL DECALS
CONTROL PANEL DECALS
ENGINE
HYDRAULIC SYSTEM
LUBRICATION
DRIVE BELTS
Bebsilycy h
bdrg.
MAINTENANCE INSTRUCTIONS
1
Belt Tension:
Air filter:
Replace outer element when the SYSTEMS
STAUS r ir rrics .
Rl
Ck l lvrl
Si
Cgalr rrs
of
Clr ry us ea
Oil Level:
Oil type:
Oil Service: Cnl ly s
Chsidylev
lak
Service:
Type:
Gi
Udt
E
To Adjust
Drive Belt
Tension:
Perform following procedure with saw fully lowered.
14uni
Note:
Loosen jam nut on belt tension limiting bolt. Turn belt tension limiting bolt
clf
Stat engine and engage belt dive; increase engine speed to full throttle position for
1
t
Oil:
Oil type:
Oil Service:
Locations: Fit
ciii
p()
Wheel drive propulsion system, lift pump,
hydraulic oil esevoir, hus ae maintained
li
Rvs ascle
rear panel for access.
Reservoir
Location:
a
Fuel Filter:
2
3
BLADE SPEED
TACHOMETER
ENGINE WILL NOT CRANK
OR START WHEN E-STOP
BUTTON IS DEPRESSED
AUXILIARY
ON
LIGHTS
ON
BLADESHAFT
DIS-ENGAGE
THROTTLE
IGNITION SWITCH
START
ENGINE PRE-HEAT
GLOW PLUG
ON
ENGINE
PRE-HEAT
TO SE TOTK
TT
FN:
OFF
OFF
ENGAGE
OFF
SYSTEMS STATUS
DEPTH
INDICATOR
WATER PUMP
6
ON
7
OPERATING INSTRUCTIONS
BLADESHAFT ROTATION DIS-ENGAGEMENT SYSTEM
DEPTH STOP CONTROL
5
150
175
8
To Control Depth of Cut with Saw
R:
Engne mut be at de when engagng o
4
125
200
Check all fluid levels. Secure blade firmly to
l
intvt
BEFORE
STARTING:
9
100
FORWARD
NEUTRAL
REVERSE
230
S
S
r
T
3
PESHAFT fowad.
E
l
ui
s
WATER
255
10
75
SUPPLY:
S
T
position and roate he depth control knob clockwise
u
rj
280
305
11
PADESHAFT backward.
E
2
50
OFF
Always follow blade manufacturer's
r
sii
BLADES:
12
To Re-adjust for Full Cutting Depth:
WARNING
330
N
fil
Hl
r
fi
additional 1 turn.
25
1
13
355
E
i
380
b
tl
14
0
i
i
tr
i
appvd deefl l
MM
STARTING
ENGINE:
0
15
INCH
NEVER attempt to remove or install blade or bladeguard
w
NR
tt t
i
STOPPING
ENGINE:
i
TO ADJUST CUT DEPTH INDICATOR:
LOWER SAW UNTIL BLADE CONTACTS
SURFACE, ADJUST DIAL TO ZERO.
The panel mounted handle conrol
FWD-
ON
WATER
FLOW
NEUTRAL-
REV
ir
CONTROL:
CONTROL
WATER
OFF
RAISE/LOWER
SWITCH
RAISE-
i
vt.
LOWER
FUNCTION:
Tisaw s eqppd ipabae.
BRAKES:
B
iii.
ADJUST WATER FLOW VALVE
FOR DESIRED WATER FLOW
FWD-NEUTRAL-REV
CONTROL
NEVER EXCEED BLADE MANUFACTURER'S RECOMMENDED RPM'S
PAGE 10 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL DECALS
CONTROL PANEL DECALS
NO.
1
2
PART NO.
37361
37354
PART NAME
QTY.
REMARKS
DECAL, MAINTENANCE, 7000 SERIES
DECAL, INSTRUMENT PANEL, 7000 SERIES
DECAL, OPERATION CONSOLE PANEL
1
1
1
3
37353
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL CONTROL ASSY.
ELECTRICAL CONTROL ASSY.
PAGE 12 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL CONTROL ASSY.
ELECTRICAL CONTROL ASSY.
NO.
1
2
PART NO.
406000
406017
37198
PART NAME
QTY.
REMARKS
SWITCH, ROCKER CH# M-58031-01
2
IGNITION SWITCH, WITH KEYS ............................ 1................... INCLUDES ITEMS W/
EMERGENCY STOP SWITCH ................................ 1 .................. SAFETY ITEM
*
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
37094
37203
37490
406021
37243
933240
405000
37368
SWITCH, TOGGLE SPDT MOMENTARY ON-ON
SWITCH, SNAP ACTION ROLLER PLUNGER
HARNESS, RELAYS AND CIRCUIT BREAKERS
INDICATOR, ENGINE
1
1
1
1
1
3
1
1
1
2
3
2
2
2
1
1
SWITCH, ROLLER ARM
WASHER, FLAT SAE 1/4 GRD 9 YZ
CONNECTOR, 4-WAY SOCKET
TACHOMETER, ELECTRIC 0-3000 RPM
BOOT, TOGGLE SWITCH
8381
406020
973752
37325
BLANK, ROCKER SWITCH
SCREW, BHHC 1/4 - 20 X 5/8 SS
SCREW, SHC M5 - 0.8 X 30MM
NUT, NYLOC M5 - 0.8
WASHER, M5
KEY, IGNITION
37324
28922-058
406017-1
25628
18
19
*
SOLENOID, LIFT PUMP
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE MOUNTS ASSY.
CONSOLE MOUNTS ASSY.
PAGE 14 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE MOUNTS ASSY.
CONSOLE MOUNTS ASSY.
NO.
1
2
3
4
5
6
7
PART NO.
20742
20743
575001
37231-753
37233-753
37227-753
12832
PART NAME
QTY.
4
4
4
2
2
2
4
REMARKS
ISOLATOR, RB2 RING/BUSHING
WASHER, ISO SNUB KROFUND DYN 148099-18
RUBBER ISOLATOR, TPC# 60166-1
MOUNT, ISOLATOR FRONT
MOUNT, ISOLATOR SIDE
MOUNT, CONSOLE ISOLATOR FRONT
WASHER, SNUBBING
8
9
10
11
12
13
14
06503-026
1665
37116-753
933242
0205
TBD
TBD
SCREW, HHC 1/2 - 13 X 3-1/4
SCREW, HHC 3/8 - 16 X 2
CONSOLE W/A
WASHER, FLAT SAE 3/9 GRD 9 Y
SCREW, HHC 3/8-16 X 1
SCREW
4
4
1
8
8
4
4
WASHER
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR CONSOLE ACCESS PANEL ASSY.
5
8
6
1
2
4
7
3
9
PAGE 16 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR CONSOLE ACCESS PANEL ASSY.
REAR CONSOLE ACCESS PANEL ASSY.
NO.
PART NO.
10024
10930
12287
29057
37219
37220
37254-753
560020
37253
PART NAME
QTY.
REMARKS
1
*
2
*
3
*
4
*
5
NUT, NYLOC 1/4 X 20
4
4
4
1
1
2
1
2
WASHER, FENDER 1/4 X 1-1/4
SCREW, THP 1/4 - 20 X 3/4 SS
DOCUMENT BOX
STRIP, BACKING PLATE SAW CONSOLE
STRIP, VERTICAL SAW CONSOLE
PANEL, REAR SAW ACCESS
LATCH, REAR SAW ACCESS PANEL
6
7
*
8
*
9
PANEL ASSEMBLY, REAR SAW ACCESS ............. 1 .................. INCLUDES ITEMS W/
*
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT CONNECTOR/DASH ACCESS ASSY.
LIGHT CONNECTOR/DASH ACCESS ASSY.
PAGE 18 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT CONNECTOR/DASH ACCESS ASSY.
LIGHT CONNECTOR/DASH ACCESS ASSY.
NO.
PART NO.
0655
12171
12176
12179
13287
25865
37234-753
923114
933241
405000
0161 C
PART NAME
QTY.
REMARKS
1
SCREW, HHC 5/16 - 18 X 3/4
SEAL, WEATHERPACK 16-18 GA,GREEN
CONNECTOR, WEATHERPACK 2 PIN MALE
TERMINAL, WEATHERPACK MALE 14-16 GA
NUT, NYLOC 8-32
8
2
1
2
2
2
*
3
*
4
*
5
6
7
8
9
HARNESS, LIGHT KIT ............................................ 1 .................. INCLUDES ITEMS W/
COVER W/A, CONSOLE DASH ACCESS
SCREW, SHC 8-32 X 1/2
WASHER, FLAT SAE 5/16 GRD 9YZ
CONNECTOR, 4-WAY SOCKET CHROME
WASHER, LOCK 5/16 MED
*
1
2
8
1
2
10
11+
*
#
12+
#
0161 D
0300 A
2532
NUT, HEX 5/16 - 18
SCREW, HHC 5/16 - 18 X 2
LIGHT ASSEMBLY .................................................. 1 .................. INCLUDES ITEMS W/
KNOB, COMFORT GRIP STAR
LIGHT BAR
CONNECTOR PLUG, 4-PIN FEMALE
CORD, LIGHT EXTENDABLE
BULB, GE H9406
2
1
13+
14+
15+
16+
17+
18+
#
#
15503
1
1
1
1
1
120206
405001
405002
19+# H9406
20
21
M18004
11963
LIGHT KIT, SAW ...................................................... 1 .................. INCLUDES ITEMS W/+
BOLT, CARRIAGE 5/16 - 18 X 1
#
1
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT AND ENGINE GUARDS ASSY.
PAGE 20 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT AND ENGINE GUARDS ASSY.
BELT AND ENGINE GUARDS ASSY.
NO.
1
3
PART NO.
0166
15503
PART NAME
SCREW, HHC 3/8 - 16 X 7/8
KNOB, COMFORT
QTY.
5
1
REMARKS
4
5
8
9
37202-753
37209-753
584011
GUARD, BELT DRIVE .............................................. 1 .................. SAFETY ITEM
GUARD, ENGINE ..................................................... 1 .................. SAFETY ITEM
WRENCH, 15/16 BLADE CLOSED END
WASHER, FLAT SAE 3/8 GRD 9 YZ
1
5
933242
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)
DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)
PAGE 22 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)
DEPTH INDICATOR/STOP SWITCH ASSY. (OLD STYLE)
NO.
1
2
3
4
5
6
7
8
PART NO.
10024
37155
37235
37240
37241
37332
37401
37504
110031
460019
560025
565005
583059
584025
933240
973752
37248
37246
37247
37249
37250
19470
933242
5283
PART NAME
QTY.
2
1
1
2
1
2
1
1
1
1
1
1
5
1
1
2
1
1
1
1
2
2
1
2
1
2
1
3
REMARKS
NUT, NYLOC 1/4 - 20
PULLEY, CABLE .75 OD
BASE, SAW DEPTH INDICATOR
PULLEY, CABLE .75 OD
SHAFT, DEPTH INDICATOR
RING, 3/16 E-STYLE EXTERNAL
SCREW, SH SHLDR 1/2-20, 5/16 OD X 1/4 L
CABLE, NYLON COAT SS .049
POINTER, CONCRETE SAW DEPTH
FLANGE, BEARING 0.25 ID X 0.75 OD
KNOB, SAW DEPTH INDICATOR
SPRING, EXTENSION
SHIM, 0.375 OD X 0.25 ID X .020 THK
STUD, 1/4 - 20 X 1-3/4 NO PLT
WASHER, FLAT SAE 1/4 GRD 9 YZ
SCREW, BHSC 1/4 - 20 X 5/8 SS
MOUNT, SWITCH PIVOT PLATE
NUT, SWIVEL DEPTH STOP
KNOB, DEPTH STOP CONTROL
COLLAR, SHAFT THREADED 3/8 - 16
WASHER, BELLEVIEW .317 X .625
WASHER, FLAT 5/16 USS
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
WASHER, FLAT SAE 3/8 GRD 9 YZ
NUT, NYLOC 5/16 - 18
NUT, NYLOC 3/8 - 16
WASHER, BELLEVIEW .389 X .750
STUD, 3/8 - 16 X 4
WASHER, FLAT USS 3/8 PLD
10133
37251
37375
4001
NOTICE
Parts on this page are no longer available. See Depth
Indicator/Stop Switch Assy. (New Style).
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)
DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)
6
10
19
5
2
1
13
9
14
19
2
3
10
10
10
8
4
4
12
16
9
20
17
11
7
15
18
17
PAGE 24 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)
DEPTH INDICATOR/STOP SWITCH ASSY. (NEW STYLE)
NO.
1
2
3
4
5
6
7
8
PART NO.
37544
37545
37547
37548
110031
560025
37549
37550
0948
PART NAME
SHAFT, DEPTH INDICATOR
BUSHING, FLANGED
SHAFT, IDLER PULLEY
PULLEY, IDLER
POINTER, CONCRETE SAW DEPTH
KNOB, SAW DEPTH INDICATOR
PULLEY, DUAL GROOVE
BELT, INDICATOR DRIVE
WASHER, FLAT SAE 1/4
QTY.
1
2
2
2
1
1
1
1
REMARKS
9
3
10
11
12
13
14
15
16
17
18
19
20
37332
926149
37162
973752
37551
37557
2295
10024
37401
37679
37678
RING, 3/16 E-STYLE EXTERNAL
SCREW, SHDLR 1/4D X 5/16L, 10-24 SCKT HD
SPRING, EXTENSION
SCREW, BHSC 1/4 - 20 X 5/8 SS
HOUSING, DEPTH INDICATOR
BRACKET, CABLE INDICATOR
SCREW, HHC 1/4 - 20 X 7/8
NUT, NYLOC 1/4 - 20
6
1
1
2
1
1
1
2
SCREW, SH SHLDR 1/2-20, 5/16 OD X 1/4 L
RING, SNAP SH 87
CABLE ASSY., DEPTH INDICATOR
1
2
1
NOTICE
Parts on this page replace those listed on Depth
Indicator/Stop Switch Assy. (Old Style).
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
F-N-R ASSY.
F-N-R ASSY.
PAGE 26 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
F-N-R ASSY.
F-N-R ASSY.
NO.
PART NO.
PART NAME
QTY.
1
2
4
1
2
1
1
1
1
1
1
1
2
1
REMARKS
1
576003
460021
20842
579072
926917
37015
37014
37013
37022
37016
37091
37024
37025
37026
37021
2153
SNAP RING - HO-185
*
2
3
BEARING, ROLLER # 6204 2RS
SCREW, PAN HD 6-32 X 1/4
GROMMET, 1/2" ID
PIN, DOWEL 1/4 X 1/2
SPACER, FNR PIVOT
DISC, FNR FRICTION BRAKE
PLATE, FNR ACCESS COVER
WELDMENT, FNR HANDLE
PLATE, FNR BRAKE
SPRING, SMALLEY WAVO RW-0250
WELDMENT, FNR SPRING PLATE
NUT, HEX FINISH M20-2.5
SCREW, HHC M20 X 2.5 X 120
*
*
4
5
*
*
6
7
*
*
8
9
*
*
10
*
11
*
12
*
13
*
14
15
*
FNR ASSEMBLY...................................................... 1 .................. INCLUDES ITEMS W/
ROD END
*
16
17
18
19
20
21
22
23
24
2
1
1
1
1
1
1
1
1
37136
37299
07469-004
4683
933241
2203
CABLE, PUSH PULL 56"
STANDOFF, PUMP CONTROL
SCREW, SHC 10-32 X 1/2
SCREW, HHC 5/16 - 18 X 5/8
WASHER, FLAT SAE 5/16 GRD 9 YZ
WASHER, FLAT #10
10019
3513
NUT, NYLOC 10-32
SCREW, HHC 10 - 32 X 1
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL ASSY.
FUEL ASSY.
12
3
2
13
6
2
14
15
4
10
12
5
9
8
7
1
11
8
PAGE 28 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL ASSY.
FUEL ASSY.
NO.
1
2
PART NO.
PART NAME
QTY.
REMARKS
0205
SCREW, HHC 3/8 - 16 X 1.0
5
19473
CLAMP, WORM HOSE 2" ......................... 8 ..................S/N ZC3700225 AND BELOW
3
4
19633
35022
BUSHING, RUBBER FUEL DAPCO
CLAMP, LOOP CUSHIONED #8
4
1
5
6
7
29338
29509
37128
PRIMER BULB 5/16 HOSE BARB............ 1 ..................S/N ZC3700225 AND BELOW
CAP, FUEL TANK
BALL VALVE, 90 W/SCREEN #5 .............. 1 ..................S/N ZC3700225 AND BELOW
1
8
9
37191
37195-753
37809
368006
933242
60058
2111897
1287773
FUELTANK
MOUNT, FUELTANK
1
1
10
11
12
13
14
15
FILTER, FUEL DEUTZ IN-LINE ................ 1 ..................S/N ZC3700225 AND BELOW
FITTING, FUEL 90 DEG
WASHER, FLAT SAE 3/8 GRD 9 YZ
HOSE, 1/4 X 3/8 PVC YELLOW .............. 1.2.................SOLD BY FOOT
HAND PUMP, INTEGRATED..................... 1 ..................S/N ZC3700226 AND ABOVE
O-RING SEAL ........................................... 1 ..................S/N ZC3700226 AND ABOVE
3
5
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY ASSY.
BATTERY ASSY.
PAGE 30 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY ASSY.
BATTERY ASSY.
NO.
1
2
3
4
5
6
7
PART NO.
0166
0655
37088
37098
37258-753
37284
37326
PART NAME
QTY.
REMARKS
SCREW, HHC 3/8 - 16 X 7/8
SCREW, HHC 5/16 - 18 X 3/4
BOX, BATTERY
1
4
1
1
1
1
1
RETAINER, BATTERY HOLD-DOWN
CLIP, BATTERY RETAINER
SCREW, HHC M14 - 2.0 X 20MM GRD 8.8 PLTD
CABLE, POSITIVE BATTERY STARTER
8
9
37327
37328
37329
37355
404006
915101
933241
933245
CABLE, POSITIVE BATT. SOLENOID LIFT PUMP 1
CABLE, NEGATIVE BATTERY ENGINE
CABLE, NEGATIVE BATTERY LIFT PUMP
1
1
10
11
12
13
14
15
CABLE, POSITIVE BATT. SOLENOID LIFT PUMP 1
BATTERY, EXIDE ORB75DT-84
1
2
4
1
SCREW, HHC 3/8 - 16 X 1/2 GRD 8
WASHER, FLAT SAE 5/16 GRD 9 YZ
WASHER, FLAT SAE 9/16 GRD 9 YZ
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
STAY-LEVEL HANDLEBARS ASSY.
STAY-LEVEL HANDLEBARS ASSY.
23
6
14
9
11
4
1
22
21
19
10
12
14
1
2
5
13
3
16
11
9
17
22
20
15
18
10
12
21
7
19
13
5
9
8
11
PAGE 32 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
STAY-LEVEL HANDLEBARS ASSY.
STAY-LEVEL HANDLEBARS ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37085
37239
37119
37120
37125
560023
37174
37139
16523
933245
933247
37284
37312
19977
37123
37173
37297
16526
4196
PART NAME
QTY.
REMARKS
BEARING, 1.25" TAP BASE
1
1
1
1
2
SHAFT, CROSSDRIVE SLH
RECEIVER, SLH HANDLEBAR LH
RECEIVER, SLH HANDLEBAR RH
BEARING, PLAIN 1.0625 ULTRASERT UC200
HANDLEBAR ASSY., CONCRETE SAW ................. 2................... INCLUDES ITEMS W/
LINK ASSY., SLH CONTROL COUPLER ................ 1................... INCLUDES ITEMS W/#
*
SLH CONTROL LEVER
1
3
4
3
4
2
2
1
1
1
2
2
2
2
2
2
9
SCREW, HHC 3/4 - 10 X 1-1/2 GD 8
WASHER, FLAT SAE 9/16 GRD 9 YZ
WASHER, FLAT SAE 3/4 GRD 9 YZ
SCREW, HHC M14-2.0 X 20MM GRD 8.8 PLTD
RING, RETAINING WHM-106
KNOB, CLAMP 1/2 - 13 THREAD
LINK, SLH CONTROL COUPLER LOWER
LINK, SLH CONTROL COUPLER UPPER
PLATE, SLH CLAMP
SCREW, HHC 1/2 - 13 X 1-3/4 GRD 8
SCREW, HHC 3/8 - 16 X .75
WASHER, FLAT SAE 1/2 GRD 9 YZ
WASHER, FLAT USS 3/8 PLD
PIN, SLH COUPLER PIVOT
10
11
12
13
14
15#
16#
17#
18#
19
20#
21
22
933244
4001
37133
560017
23
GRIP, HANDLEBAR
*
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDLEBAR BOOT ASSY.
HANDLEBAR BOOT ASSY.
1
4
3
2
PAGE 34 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDLEBAR BOOT ASSY.
HANDLEBAR BOOT ASSY.
NO.
1
PART NO.
37117
PART NAME
QTY.
REMARKS
BOOT ASSY., HANDLEBAR .................................... 1 .................. INCLUDES ITEMS W/
*
2
*
3
*
4
*
37105
37061
5065 B
BOOT, SLH HANDLEBAR
PLATE, RETAINER
SCREW, PHP 10 - 32 X 1/2
1
1
6
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER SYSTEM ASSY.
WATER SYSTEM ASSY.
2
3
5
2
1
7
3
4
6
PAGE 36 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER SYSTEM ASSY.
WATER SYSTEM ASSY.
NO.
1
2
3
4
5
6
7
PART NO.
38313
37813
37311
37533
37397
37532
37296
PART NAME
QTY.
REMARKS
FITTING, BRASS (F) 3/4 GHT SWIVEL 3/8 MNPT 1
FITTING, 90 1/2MP - 3/8FP
2
2
1
1
1
1
BALL VALVE, BRASS 3/8 MNPT X FNPT
HOSE ASSEMBLY, WATER SYSTEM 76.5"
FITTING, 8MJ X 1/2 MP
FITTING, QC FEMALE
HOSE ASSEMBLY, CROSSOVER
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE ASSY.
ENGINE ASSY.
PAGE 38 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE ASSY.
ENGINE ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
PART NAME
QTY.
REMARKS
35396
ENGINE, DEUTZ 60HP BF3L2011 TRBO DSL
SCREW, HHC M8 - 1.25 X 16MM
WASHER, FLAT SAE 5/16 GRD 9 YZ
NUT, NYLOC 1/4 X 20
1
2
2
2
2
2
2299
933241
10024
933240
915004
37473
WASHER, FLAT SAE 1/4 GR 9 YZ
SCREW, HHC 1/4 - 20 X 7/8
HEAT SHIELD .......................................................... 1 .................. SAFETY ITEM
THROTTLE LEVER
37255
1
9
1174696
1174416
21004-003
37256
FILTER, FUEL DEUTZ ............................................. 1................... REPLACES 304010
FILTER, OIL DEUTZ ................................................ 1................... REPLACES 306012
10
11
12
V-BELT, AX-35
1
1
BRACKET, THROTTLE/FNR CABLE
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
THROTTLE CONTROL ASSY.
THROTTLE CONTROL ASSY.
1
8
7
2
3
4
9
5
6
PAGE 40 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
THROTTLE CONTROL ASSY.
THROTTLE CONTROL ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37212
37256
37255
933240
25624
923113
23942-097
12464
PART NAME
QTY.
REMARKS
THROTTLE
1
1
1
1
1
1
2
2
1
BRACKET, THROTTLE/FNR CABLE
LEVER, THROTTLE
WASHER, FLAT SAE 1/4 GRD 9 YZ
SWIVEL, CABLE END W/ WASHER
SCREW, SHC 8 - 32 X 3/8 GRD 8
WASHER, M6
SCREW, HHC M6 - 1.0 X 16MM
BULK HEAD ADAPTOR
9
25634
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE MOUNTS ASSY.
ENGINE MOUNTS ASSY.
2
15
14
10
7
4
3
10
7
6
14
15
7
10
15
14
1
6
3
4
9
12
11
5
10
8
14
15
13
12
PAGE 42 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE MOUNTS ASSY.
ENGINE MOUNTS ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37491
37100
37099
37031
37147
37313
37310
37146
913838
933245
4389
PART NAME
QTY.
REMARKS
MOUNT, RH ENGINE
1
1
2
2
1
2
6
2
1
8
1
2
2
4
4
MOUNT, LH ENGINE
PIN, ENGINE PIVOT
BUSHING, SPHERICAL-ULTRASERT UC200
PIN, UPPER ENGINE PIVOT
RING, SPIRAL RETAINING WHM-200
SCREW, HHC M14-2.0 X 40MM GRD 10.9 NP
SCREW, HHC M14-2.0 X 35MM GRD 10.9 NP
SCREW, HHC 3/4 - 10 X 4 GRD5 ZINC
WASHER, FLAT SAE 9/16 GRD 9 YZ
NUT, HEX 3/4 - 10
9
10
11
12
13
14
15
16530
933243
37037
21376
SCREW, HHC 7/16 - 14 X 1
WASHER, FLAT SAE 7/16 GRD 9 YZ
WASHER, ENGINE PIVOT PIN
SCREW, HHC 5/8 - 11 X 1-1/2
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
AIR CLEANER ASSY.
AIR CLEANER ASSY.
PAGE 44 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37151
10434
35309
15538
406018
65516
29218
933241
1665
PART NAME
QTY.
1
1
1
1
1
1
2
3
REMARKS
HOSE ASSY, AIR INTAKE
CLAMP, HOSE WORM # 32 1-9/16 TO 2"
TUBE, AIR INTAKE BREATHER
CLAMP, HOSE WORM # 6
INDICATOR, ELECTRICAL SERVICE
FITTING, NIPPLE 1/8" MP
CLAMP, HOSE WORM # 48
WASHER, FLAT SAE 5/16 GRD 9 YZ
SCREW, HHC 3/8 - 16 X 2
9
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10133
M940653
1928
9182
2866
NUT, NYLOC 3/8 - 16
4
2
1
1
1
1
1
1
1
1
2
1
1
2
1
1
SCREW, HHC M6 - 1.0 X 25MM GRD 10.9
SCREW, HHC M8 - 1.25 X 40MM
SCREW, HHC M8 - 1.25 X 45MM
SCREW, HHC M8 - 1.25 X 20MM
GASKET, AIR INTAKE TUBE
HOSE, 3.00 ID MOLDED 90 DEGREE
AIR CLEANER ASSEMBLY 3 INCH #7VLR
SPACER, AIR CLEANER MOUNT .375L
SPACER, AIR CLEANER MOUNT .875L
CLAMP, HOSE WORM # 44
BUSHING, AIR INTAKE 2.75 X 3.00
MOUNT, AIR FILTER
BRACKET, AIR INTAKE BODY
PRIMARY FILTER, DEUTZ BF3L2013
SAFETY FILTER, DEUTZ BF3L2014
WASHER, SNUBBING
35399
37153
37199
37307
37309
962019
37317
37112
37761
P772579
P775300
12832
575001
4
4
RUBBER ISOLATOR, TPC #60166-1
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
MUFFLER ASSY.
MUFFLER ASSY.
PAGE 46 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
MUFFLER ASSY.
MUFFLER ASSY.
NO.
PART NO.
285003
570005
8131
933241
280005
PART NAME
QTY.
REMARKS
1
EXHAUST, 12" EXTENSION
CLAMP, MUFFLER 2-1/2" 5/16 U-BOLT
NUT, FINISH L.H. 5/16 - 24
WASHER, FLAT SAE 5/16 GRD 9 YZ
1
2
4
4
*
2 #
*
3 #
*
4 #
*
5 #
*
MUFFLER ................................................................ 1................... INCLUDES ITEMS W/%
6 #% 940693
SCREW, HHC M10 - 1.5 X 25MM GRD 10.9 NP
WASHER, M10 X 21MM ZINC
NUT, M8 - 1.25"
WASHER, M8
GASKET, TURBO INLET DEUTZ
STUD, M8 - 1.25 X 30MM
MUFFLER ASSEMBLY COMPLETE ....................... 1................... INCLUDES ITEMS W/
MUFFLER AND FLEX KIT ASSEMBLY................... 1................... INCLUDES ITEMS W/#
FLEX KIT ASSEMBLY ............................................. 1................... INCLUDES ITEMS W/$
2
2
3
3
1
3
*
7 #% 940358
*
8 #$ 25592
*
9 #$ 25591
*
10 #$ 25642
*
11 #$ 25593
*
12
13
37143
280002
*
*
14 # 280004
*
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
LIFT BAIL ASSY.
LIFT BAIL ASSY.
PAGE 48 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIFT BAIL ASSY.
LIFT BAIL ASSY.
NO.
1
2
PART NO.
37114
37115
PART NAME
QTY.
REMARKS
SPACER, DEUTZ ENGINE LIFTING BRACKET
1
BRACKET, DEUTZ ENGINE LIFTING ..................... 1 .................. SEE NOTE BELOW
3
4
5
6
7
8
9
10
940694
37314
37315
940358
933244
933241
16083
SCREW, HHC M10 - 1.5 X 30MM FT 10.9 NP
SCREW, HHC M12 - 1.75 X 120MM TAP BOLT
SCREW, HHC M12 - 1.75 X 120MM 10.9 NP
WASHER, M10 X 21MM ZINC
WASHER, FLAT SAE 1/2 GRD 9 YZ
WASHER, FLAT SAE 5/16 GRD 9 YZ
NUT, HEX M12 - 1.75 NO PLATE
1
1
1
1
3
1
1
1
06500-007
SCREW, HHC 5/16 - 18 X 7/8
NOTICE
Type 2 Rope Guide System supercedesType 1 Rope Guide
System. See Front Pointer Assy.
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
PLATFORM GUARDS/REAR POINTER ASSY.
PLATFORM GUARDS/REAR POINTER ASSY.
16
11
3
15
4
5
4
5
1
2
9
10
9
6
10
12
7
13
8
10
14
PAGE 50 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
PLATFORM GUARDS/REAR POINTER ASSY.
PLATFORM GUARDS/REAR POINTER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37185
583091
583092
933244
3214
915105
110020
37360
915105
933242
37122
37450
10133
20982
M200000
35030
PART NAME
QTY.
REMARKS
GUARD, BLADESHAFT PULLEY ............................ 1 .................. SAFETY ITEM
STRAP, LOWER BELT GUARD
WASHER, LOWER BELT PROTECTOR
WASHER, FLAT SAE 1/2 GRD 9 YZ
SCREW, HHC 1/2 - 13 X 1-1/4
SCREW, HHC 3/8 - 16 X 1.0 GRD 8
POINTER, REAR SAW
SHIELD, CONCRETE SLURRY
SCREW, HHC 3/8 - 16 X 1.0 GRD 8
WASHER, FLAT SAE 3/8 GRD 9 YZ
PLATFORM, W/A
STRIP, SLURRY CONTROL
NUT, NYLOC 3/8 - 16
SCREW, FHSC 3/8 - 16 X 1-1/2 PLATED
GUARD, SAW BLADE COLLAR
GUARD W/A, SAW BLADE COLLAR, RH
1
1
4
4
1
1
1
3
6
1
1
3
3
1
1
9
10
11
12
13
14
15
16
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 51
Download from Www.Somanuals.com. All Manuals Search And Download.
WHEEL DRIVE ASSY.
WHEEL DRIVE ASSY.
PAGE 52 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
WHEEL DRIVE ASSY.
WHEEL DRIVE ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37102
37095
37096
37097
37138
0655
PART NAME
QTY.
1
2
2
1
2
2
8
5
2
2
2
10
7
3
2
2
3
REMARKS
MOUNT, WHEEL MOTOR
WHEEL, 12 X 3 TAPERED BORE
BRAKE PAD
BRAKE ARM
CAP, WHEEL DUST
SCREW, HHC 5/16 - 18 X 3/4
SCREW, HHC 3/8 - 16 X 1.0
SCREW, HHC 1/2 - 13 X 1-1/4
WASHER, FENDER 5/16 X 1 ZINC
SPRING, 1.125 X .187 X 4 W/EYELET
EYEBOLT, 3/8 - 16 X 2.0
WASHER, FLAT SAE 3/8 GRD 9 YZ
WASHER, FLAT SAE 1/2 GRD 9 YZ
WASHER, FLAT SAE 3/4 GRD 9 YZ
NUT, NYLOC 3/8 - 16
NUT, HEX FINISH 1/2 - 13
PIN, CLEVIS 1/2 X 1.25
PIN, CLEVIS 3/4 X 2
PIN, COTTER 5/32 X 1-1/2
PIN, COTTER 5/32 X 1
SPRING, CREST TO CREST
NUT, HEX FINISH 3/8 - 16
NUT, SLOTTED 3/4-16
0205
3214
9
933213
37048
23858-001
933242
933244
933247
10133
968011
19974
966166
965105
965103
37322
1456
10
11
12
13
14
15
16
17
18
19
20
21
22
24
26
1
1
3
4
2
2
2
12426
0126
KEY, WOODRUFF #606 3/16 X 3/4
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 53
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT AXLE ASSY.
FRONT AXLE ASSY.
PAGE 54 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT AXLE ASSY.
FRONT AXLE ASSY.
NO.
1
2
3
4
PART NO.
37106
933246
06505-008
37132
PART NAME
QTY.
REMARKS
FRONT AXLE W/A
1
2
2
WASHER, FLAT 5/8 SAE GRD9 YZ
SCREW, HHC 5/8 - 11 X 1.00
WHEEL ASSEMBLY, FRONT ................................... 2.................. INCLUDES ITEMS W/
*
5
6
7
8
2621
26091
2186
926064
5283
FITTING, GREASE ZERK STR 1/4 - 28
SCREW, SHS 1/4 - 28 X 1/4 CUP POINT
SCREW, SHC 5/16 - 18 X 2-1/4 PLTD
SCREW, SQHS CUP POINT 5/16 - 24 X 5/8
NUT, NYLOC 5/16 - 18
2
4
1
1
1
9
10
11
12
13
14
15
16
1162 A
37040
933244
16629
37260
915211
37138
CAP, GREASE ZERK #2 YELLOW
BEARING, 1.250" FLANGE
WASHER, FLAT SAE 1/2 - 13 GD 8
NUT, NYLOC 12 - 13 GD 8
PIN, LIFT CYLINDER
SCREW, HHC 1/2 - 13 X 2 GRD8 YZ
CAP, WHEEL DUST
WHEEL, 8 X 3 POLYURETHANE
BEARING, BALL KOYO # 6005 SRS
SEAL, OIL CR # 28655
SNAP RING, - HO-185
PLATE, BACKING
2
2
16
12
1
12
2
2
4
2
2
17
37131
*
18
*
460002
485002
576003
37165
19
*
20
21
*
2
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 55
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC SYSTEM ASSY.
HYDRAULIC SYSTEM ASSY.
PAGE 56 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC SYSTEM ASSY.
HYDRAULIC SYSTEM ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37113
306006
25617
37121
37211
37213
37104
37056
37162
933240
1579
PART NAME
PUMP, 24V DC LIFT - HYDROGEAR
FILTER, TRANSAXLE
FILTER HEAD, TRANSAXLE
LIFT CYLINDER ASSEMBLY
CYLINDER, BRAKE 2" X 1.5" STROKE
RESERVOIR, 350ML HYDROGEAR 71327
PUMP, HYDROGEAR
MOTOR, WHEEL - HYDROGEAR HGM-15P-7131
EXTENSION SPRING, 1.8" - 8.1 LB RATE
WASHER, FLAT SAE 1/4 GRD 9 YZ
SCREW, HHC 1/4 - 20 X .5
QTY.
REMARKS
1
1
1
1
1
1
1
2
1
4
2
2
9
10
11
12
4514
SCREW, HHC 1/4 - 20 X 5/8 GRD 5
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 57
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE PIVOT CYLINDER ASSY.
ENGINE PIVOT CYLINDER ASSY.
PAGE 58 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE PIVOT CYLINDER ASSY.
ENGINE PIVOT CYLINDER ASSY.
NO.
PART NO.
37445
37446
37447
37448
37449
37492
37390
37495
37260
37166
933243
16530
PART NAME
QTY.
REMARKS
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
VALVE, CHECK
2
1
1
1
VALVE, CARTRIDGE 4-WAY 2-POSITION
SOLENOID COIL 12VDC
PISTON, PILOT
PISTON, BACKUP RING ..................................... 2 ............... S/N ZD3700241 AND BELOW
O-RING ................................................................ 1 ............... S/N ZD3700241 AND BELOW
CYLINDER, HYDRAULIC
CYLINDER AND VALVE ASSEMBLY .................. 1 ............... INCLUDES ITEMS W/
1
*
9
PIN, LIFT CYLINDER
1
1
2
2
10
11
12
PIN, LOWER ENGINE PIVOT
WASHER, FLAT SAE 7/16 GRD 9 YZ
SCREW, HHC 7/16 - 14 X 1
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 59
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC HOSES ASSY.
HYDRAULIC HOSES ASSY.
PAGE 60 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC HOSES ASSY.
HYDRAULIC HOSES ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37475
37476
37477
37290
37295
37294
37347
37291
37292
37278
37279
37283
37281
37282
37293
37280
PART NAME
QTY.
REMARKS
HOSE ASSEMBLY, #4 LP
HOSE ASSEMBLY, #4 LP
HOSE ASSEMBLY, #4 LP
HOSE ASSEMBLY, #4 HP PARFLEX
HOSE ASSEMBLY, #6-8 LP
HOSE ASSEMBLY, #6 LP
1
1
1
1
1
1
HOSE ASSEMBLY, #6 LP....................................... 1 ................... SEE NOTE BELOW
HOSE ASSEMBLY, #4 PARFLEX
HOSE ASSEMBLY, #4 LP
HOSE ASSEMBLY, #6 PARFLEX
HOSE ASSEMBLY, #6 PARFLEX
HOSE ASSEMBLY, #8 LP
HOSE ASSEMBLY, #6 LP
HOSE ASSEMBLY, #6 LP
HOSE ASSEMBLY, #4 LP
HOSE ASSEMBLY, DRIVE MOTOR CROSSOVER 1
1
1
1
1
1
1
1
1
9
10
11
12
13
14
15
16
NOTICE
FOR SAWS up to S/N ZD3700238 ONLY. When Ordering
this hose (P/N 37347 item 7 on this page), also order two
(2) each fittings (P/N 11887, item 22 shown on Hydraulic
Fittings and Clamps Assy.).
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 61
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC FITTINGS AND CLAMPS ASSY.
HYDRAULIC FITTING AND CLAMPS ASSY.
19
18
23
24
16
3
4
3
20
1
10
2
5
9
8
14
7
21
10
22
10
17
11
22
3
12
13
15
25
26
27
2
31
32
28
6
33
27
28
12
13
30
29
PAGE 62 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRAULIC FITTINGS AND CLAMPS ASSY.
HYDRAULIC FITTING AND CLAMPS ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
21095
368817
11722
15538
37793
37352
37792
37433
366437
11721
12431
21115
37405
37406
21159
367470
37788
12147
12148
35022
37493
11887
PART NAME
QTY.
1
2
4
2
1
1
1
1
1
4
1
2
2
2
1
3
REMARKS
FITTING, STR 4MJ - 4MO
FITTING, 90 4MJ - 4MO
FITTING, 90 6MJ - 6MO
CLAMP, HOSE WORM #6, 7/16" TO 7/8"
CLAMP ASSEMBLY, HOSE
CLAMP ASSEMBLY, 5/16 HOSE
CLAMP ASSEMBLY, HOSE
CLAMP ASSEMBLY, HOSE
FITTING, BULKHEAD #4 JIC
FITTING, STR 6MJ - 6MO
9
10
11
12
13
14
15
16
17
18
19
20
21
22
FITTING, 90 8MJ - 6MO
FITTING, STR 6MJ - 6MO LONG
FITTING, 10MO X - 6FO - ST
FITTING, 6MJ X 10MO - ST
FITTING, 45 4MJ - 4MO
FITTING, STR 4MJ - 6MO
FITTING, TEE 4MO - 4MO - 4MJ
FITTING, QD 6MO DIAGN PARKER PD 361
CAP, DUST DIAG PARKER PD6 - 285
CLAMP, LOOP CUSHIONED #8
FITTING, ORIFICE 4MJ - 4MO X .100
1
1
1
1
1
FITTING, STR 6MJ - 4MO ....................................... 2 .................. SEE NOTE BELOW
NOTICE
FOR SAWS up to S/N ZD3700238 ONLY. When Ordering
hose (P/N 37347 item 7 on Hydraulic Hoses Assy.), also
order two (2) each fittings (P/N 11887, item 22 shown on
this page.
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 63
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT POINTER ASSY.
FRONT POINTER ASSY.
PAGE 64 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT POINTER ASSY.
FRONT POINTER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
37182
582008
500005
37178
926006
15503
110038
1456
PART NAME
QTY.
REMARKS
POINTER
1
4
1
1
2
1
1
1
BUSHING, FLANGE 1.0 OD X .75 ID
WHEEL, POINTER 6" X 1"
AXLE, POINTER WHEEL
SCREW, SQHS CP 1/4 - 20 X1/2
KNOB, COMFORT GRIP STAR
SAW POINTER 15" RH FRONT
NUT, HEX FINISH 3/8 - 16
9
10133
5070 B
933247
3233
37261
544002
125043-3
540039
10136
1665
NUT, NYLOC 3/8 - 16 ............................................... 1 .................. SEE NOTE BELOW
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
NUT, NYLOC 3/4 - 10
2
2
2
2
WASHER, FLAT SAE 3/4 GRD 9 YZ
WASHER, FENDER 1.50 OD X 3/8 ID
PLUG, FINISHING 3/4"
SHOULDER, ADAPTER........................................... 1 .................. SEE NOTE BELOW
RETAINER, SAW POINTER CABLE........................ 1 .................. SEE NOTE BELOW
PULLEY, POINTER ROPE....................................... 1 .................. SEE NOTE BELOW
WASHER, FLAT SAE 3/8 ......................................... 2 .................. SEE NOTE BELOW
SCREW, HHC 3/8 - 16 X 2 ....................................... 1 .................. SEE NOTE BELOW
0205
SCREW, HHC 3/8 - 16 X 1.0
1
574003
574002
15173
13287
923199
37112
ROPE, POINTER ASSY. ......................................... 1 .................. INCLUDES BALL & CRIMP
CAM CLEAT
1
2
2
2
1
WASHER, FLAT #8
NUT, NYLOC 8 - 32
SCREW, SHC 8 - 32 X 1-1/4
MOUNT, AIR FILTER
NOTICE
These parts are used only on "Type 1" Rope Guide Systems
shown in illustration on Lift Bail Assy.
Type 2 Rope Guide System supercedes Type 1 Rope
Guide System. See illustration.
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 65
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT DRIVE ASSY.
BELT DRIVE ASSY.
PAGE 66 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT DRIVE ASSY.
BELT DRIVE ASSY.
NO.
1
3#
4
5#
6#
7
PART NO.
PART NAME
QTY.
REMARKS
37001
PLATE, ENGINE ADAPTER-DEUTZ
SHAFT, ENGINE DRIVE-DEUTZ
PLATE, PULLEY DRIVE COVER
FLANGE, ENGINE DRIVE-DEUTZ
FLANGE, PULLEY DRIVE-DEUTZ
1
1
1
1
1
37019
37137
BELT TENSIONER ASSY. ....................................... 1................... INCLUDES ITEMS W/
*
8
9
37002
PULLEY, PUMP DRIVE 3.75" A-SECTION
WASHER, THRUST 1.00 OD X .265 L X .265 H
SCREW, SHC 10-32 X 3/4
SCREW, SHC 1/4 - 20 X 1/2
SPACER, BELT TENSIONER
BELT, AX-35
1
1
1
8
1
1
1
37319
10
11
12
13
14
15
15
16
17
37320
923201
37267
21004-003
37755
460016
460023
10057-061
37269
SHOE, LOWER BELTSIDE
BUSHING, TAPER-LOCK 2517 X 1-7/8 ................... 1 .................. FITS 20", 26", 30", 36"
BUSHING, TAPER-LOCK 2012 X 1-7/8 ................... 1 .................. FITS 16"
KEY, 1/2" SQ X 3-1/2"
KEY, SQUARE 1/8 X 3/4
SCREW, MODIFIED HEAD 3/8 X 1-3/4
GUARD, PUMP DRIVE ............................................ 1 .................. SAFETY ITEM
BUSHING, QUICK DISCONNECT BLADE SHAFT 2
SCREW, HHC 5/8 - 11 X 3 GR8
SCREW, HHC 5/8 - 11 X 3 LH GR8
SCREW, SHS 1/4 - 20 X 1/2 NP
PIN, DOWEL 1/4 X 3/4
STUD, 3/8 - 16 X 3 SELF-LOCKING
WASHER, FLAT SAE 3/8 GRD 9 YZ
NUT, HEX FINISH 3/8 - 16
STUD, 1/2 - 13 X 1-3/4
SCREW, FHSC 3/8 - 16 X 1-3/4
NUT, NYLOC 3/8 - 16
SCREW, FHSC M10 - 1.5 X 25MM NP
SCREW, HHC M10 - 1.0 X 50MM 10.9 NP
1
1
1
18
19
37266
37218
*
20
21
22
23
24
25
26
27
28
29
30
31
32
33
33
34
34
35
36
36
36
36
36
582012
915315
915316
10138
926919
37268
933242
1456
37762
1
1
1
1
1
5
4
1
2
2
11
8
924289
10133
939978
938422
37177
FLANGE ASSY, 6.0" OUTER BLADE...................... 2 ............. FITS 30", 36" BELT DRIVE
FLANGE ASSY, 5.0" OUTER BLADE...................... 2 ............. FITS 16", 20", 26" BELT DRIVE
FLANGE ASSY, 6.0" INNER BLADE ....................... 2 ............. FITS 30", 36" BELT DRIVE
FLANGE ASSY, 5.0" INNER BLADE ....................... 2 ............. FITS 16", 20", 26" BELT DRIVE
37169
37176
37168
520007
540047
540041
540040
540035
540046
V-BELT, 5G 3 VX 530 POWERBAND
2
PULLEY, 5.6 10G 3V X 2517 TAPER ....................... 1 ............. FITS 36" BELT DRIVE
PULLEY, 5.3 10G 3V X 2517 TAPER ....................... 1 ............. FITS 30" BELT DRIVE
PULLEY, 5.0 10G 3V X 2517 TAPER ....................... 1 ............. FITS 26" BELT DRIVE
PULLEY, 4.75 10G 3V X 2517 TAPER ..................... 1 ............. FITS 20" BELT DRIVE
PULLEY, 4.2 10G 3V X 2012 TAPER ....................... 1 ............. FITS 16" BELT DRIVE
CONTINUED NEXT PAGE
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 67
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT DRIVE ASSY.
BELT DRIVE ASSY. (CONTINUED)
PAGE 68 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BELT DRIVE ASSY.
BELT DRIVE ASSY. (CONTINUED)
NO.
37
38
39
40
41
42
43
44
45
PART NO.
37134
PART NAME
QTY.
REMARKS
BLADE SHAFT ASSY.
1
926790
25992
PIN, DOWEL 3/8 X 1-3/4 ..................................... 2 ................. INCLUDED W/ ITEM 33
SCREW, SHC 12 - 24 X 1/2
RING, FAN MOUNT
FAN, CW 8" 10 BLADE
STUD, 1/2 - 13 X 5-1/2
SCREW, HHC 3/8 - 16 X 3/4 GR8 YZ
SHOE, UPPER BELTSIDE
SPLINED DRIVE ASSY. ...................................... 1 ................. INCLUDES ITEMS W/#
4
1
1
1
2
1
37735
37734
37763
915103
37756
37833
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 69
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE PULLEY ASSY.
DRIVE PULLEY ASSY.
PAGE 70 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE PULLEY ASSY.
DRIVE PULLEY ASSY.
NO.
PART NO.
37011
37154
37003
37028
37090
37017
37092
37035
915004
933240
37103
PART NAME
QTY.
REMARKS
1
PULLEY, 3.3 10 3V 4.5 1A ....................................... 1 ............. FITS 26", 30", 36" BELT DRIVE
PULLEY, 4.1 3V 4.5 1A ............................................ 1 ............. FITS 16", 20" BELT DRIVE
*
1#
2 #
SUPPORT, ENGINE DRIVE BEARING
BEARING, TAPERED ROLLER NSK #32007XJ
SPRING, SMALLEY WAVO RW-0162
FLANGE, ENGINE DRIVE BEARING SUPPORT
SEAL, CR 17753
SCREW, SHC 4-40 X 3/8
SCREW, HHC 1/4 - 20 X 7/8 GR8 YZ
WASHER, FLAT SAE 1/4 GRD 9 YZ
DRIVE PULLEY ASSY., 3.3 10 3V 4.5 1A ............... 1 ............. FITS 26", 30", 36" BELT DRIVE
.................................................................................................. INCLUDES ITEMS W/
DRIVE PULLEY ASSY., 4.1 3V 4.5 1A .................... 1 ............. FITS 16", 20" BELT DRIVE
.................................................................................................. INCLUDES ITEMS W/#
1
2
1
1
2
4
8
8
*
3 #
*
4 #
*
5 #
*
6 #
*
7 #
*
8 #
*
9 #
*
10
*
10
37321
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 71
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADESHAFT ASSY.
BLADE SHAFT ASSY.
PAGE 72 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADESHAFT ASSY.
BLADE SHAFT ASSY.
NO.
PART NO.
37108
37111
06502-010
933243
421001
583026
577009
25695
PART NAME
QTY.
1
1
6
6
1
1
1
1
1
2
1
2
2
2
2
2
REMARKS
1
HOUSING, BLADESHAFT
*
2
3
BLADESHAFT, 7000 SERIES
SCREW, HHC 7/16 - 14 X 1-1/4
WASHER FLAT SAE 7/16 GRD 9 YZ
SENSOR, HALL EFFECT SPEED PICKUP
DRAIN PLUG, MAGNETIC 1/2 - 20
GASKET, DRAIN PLUG
*
*
4
5
*
*
6
7
*
*
8
9
WASHER, SEAL 3/4"
*
25690
GEAR, SAW BLADE SHAFT SPEED PICKUP
BEARING, ROLLER KOYO # 7210BGC3
BEARING, BALL KOYO # NU2210RC3
SEAL, OIL CR# 28655
*
10
460010
39460011
480006
480007
485003
486001
576006
578135
576007
10138
*
11
*
12
*
13
*
SEAL, OIL CR- 19599
14
SLEEVE, BLADE SHAFT SEAL
WASHER, THRUST 6000 SERIES
SNAP RING, VITON # AS-135
O-RING, VITON # AS-135
SNAP RING, VHO-354
SCREW, SHS 1/4 - 20 X 1/2
KEY, WOODRUFF #807 1/4 X 7/8
*
15
*
16
*
17
*
2
1
6
2
18
19
*
*
20
*
927048
37134
21
BLADESHAFT ASSEMBLY ..................................... 1 .................. INCLUDES ITEMS W/
*
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 73
Download from Www.Somanuals.com. All Manuals Search And Download.
16", 20", 26" BLADEGUARD ASSY.
16", 20", 26" BLADEGUARD ASSY.
PAGE 74 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
16", 20", 26" BLADEGUARD ASSY.
16", 20", 26" BLADEGUARD ASSY.
NO.
PART NO.
200004
200008
200010
200003
200007
200009
PART NAME
QTY.
REMARKS
1
BLADEGUARD W/A, 16" REAR HALF
BLADEGUARD W/A, 20" REAR HALF
BLADEGUARD W/A, 26" REAR HALF
BLADEGUARD W/A, 16" FRONT HALF
BLADEGUARD W/A, 20" FRONT HALF
BLADEGUARD W/A, 26" FRONT HALF
BUSHING, BLADEGUARD HINGE DELRIN
1
1
1
1
1
1
1
*
1#
1$
2
*
2#
2$
3 #$ 582040
*
4 #$ 200019
FLAP,MUD BLADEGUARD ...................................... 1 .................. SAFETY ITEM
*
5 #$ 37394
MANIFOLD, WATER SMALL
FITTING, PLUG 1/8MP HEX SKT HD
FITTING, BRASS 6BARB-1/4MP
NUT, NYLOC 1/2-13
1
1
2
1
3
1
1
2
1
1
2
2
2
2
2
*
6 #$ 2113
*
7 #$ 370456
*
8 #$ 10176
*
9 #$ 10024
NUT, NYLOC 1/4-20
*
10 #$ 0131 A
SCREW, HHC 1/4 - 20 X 3/4
SCREW, HHC 1/2 - 13 X 3-1/4
SCREW, HHC 1/4 - 20 X 1-3/4
WASHER, FENDER 1/4 X 1-1/4
3/8" QC MALE
HOSE, WATER #6 LP, 16", 20" BLADEGUARD
HOSE, WATER #6 LP, 26" BLADEGUARD
PIPE STRAP 3/8
*
11 #$ 06503-026
*
12 #$ 26250
*
13 #$ 10930
*
14 #$ 37396
*
15 # 37506
*
15$
37508
16 #$ 22129-001
*
17 #$ 1618
NUT, NYLOC 10-24
SCREW, SHC 10-24 X 1/2
*
18 #$ 923144
*
19
19
19
37335
37336
37337
BLADEGUARD ASSY., 16" STD SYS ..................... 1 .................. SAFETY ITEM
....................................................................................................... INCLUDES ITEMS W/
BLADEGUARD ASSY., 20" STD SYS ..................... 1 .................. SAFETY ITEM
....................................................................................................... INCLUDES ITEMS W/#
BLADEGUARD ASSY., 26" STD SYS ..................... 1 .................. SAFETY ITEM
....................................................................................................... INCLUDES ITEMS W/$
*
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 75
Download from Www.Somanuals.com. All Manuals Search And Download.
30", 36" BLADEGUARD ASSY.
30", 36" BLADE GUARD ASSY.
PAGE 76 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
30", 36" BLADEGUARD ASSY.
30", 36" BLADE GUARD ASSY.
NO.
PART NO.
200012
200014
200011
200013
582039
37395
200019
0131 A
26250
PART NAME
QTY.
REMARKS
1
BLADEGUARD W/A, 30" REAR HALF
BLADEGUARD W/A, 36" REAR HALF
BLADEGUARD W/A, 30" FRONT HALF
BLADEGUARD W/A, 36" FRONT HALF
BUSHING, BLADEGUARD HINGE DELRIN
MANIFOLD, WATER LARGE
1
1
1
1
1
1
*
1#
2
*
2#
3 #
*
4 #
*
5 #
*
FLAP,MUD BLADEGUARD ...................................... 1 .................. SAFETY ITEM
6 #
SCREW, HHC 1/4 - 20 X 3/4
SCREW, HHC 1/4 - 20 X 1-3/4
SCREW, HHC 1/2 - 13 X 3-3/4
NUT, NYLOC 1/2-13
1
2
1
1
3
1
2
1
1
2
2
2
2
2
*
7 #
*
8 #
*
06503-030
10176
9 #
*
10 # 10024
NUT, NYLOC 1/4-20
*
11 # 10930
WASHER, FENDER 1/4 X 1-1/4
FITTING, BRASS 6BARB-1/4MP
FITTING, PLUG 1/8MP HEX SKT HD
3/8" QC MALE
NUT, NYLOC 10-24
SCREW, SHC 10-24 X 1/2
PIPE STRAP 3/8
HOSE, WATER #6 LP, 30" BLADEGUARD
HOSE, WATER #6 LP, 36" BLADEGUARD
BLADEGUARD ASSY., 30" STD SYS ..................... 1 .................. SAFETY ITEM
....................................................................................................... INCLUDES ITEMS W/
BLADEGUARD ASSY., 36" STD SYS ..................... 1 .................. SAFETY ITEM
*
12 # 370456
*
13 # 2113
*
14 # 37396
*
15 # 1618
*
16 # 923144
*
17 # 22129-001
18
*
37509
37510
37338
*
18#
19
*
19
37339
....................................................................................................... INCLUDES ITEMS W/#
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 77
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONALWEIGHT KIT ASSY.
OPTIONAL WEIGHT KIT ASSY.
PAGE 78 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONALWEIGHT KIT ASSY.
OPTIONAL WEIGHT KIT ASSY.
NO.
1
PART NO.
37829
PART NAME
WEIGHT KIT
QTY.
1
REMARKS
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 79
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS AND CONDITIONS OF SALE — PARTS
5. Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
PAYMENT TERMS
Terms of payment for parts are net 30 days.
FREIGHT POLICY
6. The following items are not returnable:
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
a. Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
SPECIAL EXPEDITING SERVICE
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
LIMITATIONS OF SELLER’S LIABILITY
MINIMUM ORDER
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
c. Any line item with an extended
dealer net price of less than
$5.00.
d. Special order items.
RETURNED GOODS POLICY
e. Electrical components.
f. Paint, chemicals, and lubricants.
g. Decals and paper products.
h. Items purchased in kits.
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
1. A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
7. The sender will be notified of any material
received that is not acceptable.
8. Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
9. Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
a. The parts numbers and descriptions
must match the current parts price
list.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
c. The list must state the reason(s)
for the return.
Effective: February 22, 2006
d. The list must reference the sales
order(s) or invoice(s) under
which the items were originally
purchased.
11. Credit issued will be applied to future
purchases only.
PRICING AND REBATES
e. The list must include the name
and phone number of the person
requesting the RMA.
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
3. AcopyoftheReturnMaterialAuthorization
must accompany the return shipment.
4. Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
PAGE 80 — PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
PS7060 SERIES MULTIQUIP SAW — PARTS MANUAL — REV. #8 (07/26/10) — PAGE 81
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVETHE MODEL AND SERIAL
NUMBER ON-HANDWHEN CALLING
UNITED STATES
Multiquip Corporate Office
18910 Wilmington Ave.
Carson, CA 90746
MQ Parts Department
Tel. (800) 421-1244
800-427-1244
310-537-3700
Fax:800-672-7877
Fax:310-637-3284
Fax (800) 537-3927
Contact: mq@multiquip.com
Mayco Parts
800-306-2926
310-537-3700
Warranty Department
800-421-1244, Ext. 279 Fax:310-537-1173
310-537-3700, Ext. 279
Fax:800-672-7877
Fax:310-637-3284
Service Department
800-421-1244
Technical Assistance
800-478-1244
Fax:310-537-4259
Fax:310-631-5032
310-537-3700
MEXICO
MQ Cipsa
UNITED KINGDOM
Multiquip (UK) Limited Head Office
Hanover Mill, Fitzroy Street,
Ashton-under-Lyne,
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla72760Mexico
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Tel: 0161 339 2223
Fax: 0161 339 3226
Lancashire OL7 0TL
CANADA
Multiquip
BRAZIL
Multiquip
4110IndustrielBoul.
Laval, Quebec, Canada H7L 6V3
Tel: (450) 625-2244
Fax: (450) 625-8664
Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055
Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055
© COPYRIGHT 2008, MULTIQUIP INC.
Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical
data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications,
design or the information published in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Miele Clothes Dryer T1520 User Manual
Miller Electric Welder Auto Axcess 675 User Manual
Multiquip Portable Generator TLG12SPX User Manual
NAD Stereo Receiver 7240PE User Manual
NAD Stereo System C 445 User Manual
Nikon Camera Flash SB 700 User Manual
Olympus Camera Lens MCON 35 User Manual
Oster Mixer 2534 User Manual
Panasonic Air Conditioner CS ME7QKUA User Manual
Panasonic DVR ag hpx300p User Manual