MultiConnect Adapter
Serial-to-Bluetooth Adapter
MTS2BTA
MTS2BTA-R
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Contents
Chapter 1 – Description and Specifications ..............................................................................................................4
Product Description ....................................................................................................................................................4
Applications ................................................................................................................................................................4
Features .....................................................................................................................................................................4
Product Build Options.................................................................................................................................................5
MultiConnect Package Contents ................................................................................................................................5
AT Commands............................................................................................................................................................5
Handling Precautions .................................................................................................................................................5
General Safety............................................................................................................................................................6
Vehicle Safety........................................................................................................................................................6
Maintenance of the Serial-to-Bluetooth Adapter....................................................................................................6
Technical Specifications.............................................................................................................................................7
LED Indicators............................................................................................................................................................8
Chapter 2 – Installation and Cabling ..........................................................................................................................9
Step 1 – Attaching the Adapter to a Fixed Location....................................................................................................9
Step 2 – Connect the Adapter to Your System.........................................................................................................10
Setup Example ....................................................................................................................................................10
Connections for the MultiModem Using AC Power..............................................................................................10
Connections for the MultiModem Using DC Power..............................................................................................10
Chapter 3 – AT Commands .......................................................................................................................................11
AT Command Reference Guide ...............................................................................................................................11
Using AT Commands ...............................................................................................................................................11
Default Settings / Changing Configuration...........................................................................................................11
Setting Parameters..............................................................................................................................................12
Test Procedures Using AT Commands ....................................................................................................................13
Disabling Flow Control Using AT Commands...........................................................................................................14
Configuring to Use DTR for Resetting the MTS2BTA Using AT Commands...........................................................14
Chapter 4 – Peripheral Devices.................................................................................................................................15
Antenna Requirements.............................................................................................................................................15
Pin Assignments for the Serial Port..........................................................................................................................15
Appendix A – Regulatory Compliance .....................................................................................................................16
Regulatory Compliance Statements .........................................................................................................................16
EMC, Safety, and R&TTE Directive Compliance.................................................................................................16
International Adapter Restrictions........................................................................................................................16
Telecom Requirements for the United States......................................................................................................16
Industry Canada ..................................................................................................................................................16
New Zealand Telecom Warning Notice ...............................................................................................................17
South African Statement......................................................................................................................................17
Other ...................................................................................................................................................................17
Appendix B – Multi-Tech Warranty Statement and Product Repair.......................................................................18
Warranty...................................................................................................................................................................18
Product Repair..........................................................................................................................................................18
Repair Procedures for U.S. and Canadian Customers........................................................................................18
Repair Procedures for International Customers (Outside U.S.A. and Canada) ...................................................19
Repair Procedures for International Distributors..................................................................................................19
Replacement Parts..............................................................................................................................................19
Index............................................................................................................................................................................20
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 – Description and Specifications
Chapter 1 – Description and
Specifications
Product Description
The MultiConnect Serial-to-Bluetooth adapter enables communication between an installed host serial device and a
peripheral wireless device. The serial side of the MultiConnect provides transparent serial data-to-Internet protocol
conversion, eliminating the need for any hardware modifications. The embedded Bluetooth wireless technology of the
MultiConnect provides a secure, standards-based wireless connection between the host and the peripheral device.
Bluetooth provides wireless data transfer up to 100 meters, completely eliminating the need for a serial cable
connection.
Applications
The MultiConnect adapters will IP-enable any device to provide remote monitoring, control and configuration of any
system. The solution is ideal for the following applications:
•
Retail Environment
∗
∗
∗
POS (Point of Sale) Devices
Bar Code Scanners
Credit Card Reader
•
Restaurant Environment
∗
∗
∗
Order Printer
Receipt Printer
Credit Card Reader
•
•
•
•
•
•
•
Outdoor Signs
Gas pumps
Security Systems / Surveillance Cameras
Emergency Vehicles
Delivery Trucks
Home Health Care
Connecting to Other Bluetooth-enabled Devices
∗
∗
∗
∗
∗
Modem
Mobile Phone
Headset
Computer
PDA
Features
Instant Serial Cable Replacement
Running serial cabling can be expensive and sometimes problematic especially if it is in an outdoor
environment. With the SocketWireless, you can eliminate the cable and connect your peripheral devices
effortlessly with a Bluetooth wireless network. In a point-to-point connection, one SocketWireless is
embedded in a host device, such as a PC; the other is attached to a serial peripheral device such as a bar-
code scanner, receipt printer or scale. Now you can use the wireless network to transfer information
between the host and the device for up to 100 meters.
Wireless Host Connection
SocketWireless Bluetooth can also connect to any other Bluetooth-enabled device, such as a PDA or WAN
radio increasing user mobility in mission-critical applications such as emergency vehicles, delivery trucks,
medical monitoring, and point-of-sale environments. SocketWireless Bluetooth is operating system
independent and can be seamlessly embedded in any peripheral device. No application software is needed.
Secure, Robust Communication
SocketWireless Bluetooth complies with the Bluetooth specifications for security which includes 128-bit
encryption and 10 alphanumeric Personal Identification Number (PIN) authentication. It utilizes FHSS
(Frequency Hopping Spread Spectrum) technology. In addition, SocketWireless Bluetooth uses error
correction schemes for guaranteed packet delivery.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 – Description and Specifications
Product Build Options
Product
Description
Region
MTS2BTA
MTS2BTA-R
Serial-to-Bluetooth Adapter AC-Powered
Serial-to-Bluetooth Adapter DC-Powered
North America and Europe
North America and Europe
MultiConnect Package Contents
AC-Powered Version
•
•
•
•
•
•
•
•
One Serial-to-Bluetooth Adapter
One antenna
One mounting bracket
RS-232 serial cable
One universal power supply with power cord
A set of four self-adhesive plastic feet
One printed Quick Start Guide
One Serial-to-Bluetooth Adapter product CD containing the adapter drivers, User Guide, Quick Start
Guide, AT Commands Reference Guide, Global Wizard software, PhoneTools (a data communications
program), and Acrobat Reader
DC-Powered Version
•
•
•
•
•
•
•
•
One Serial-to-Bluetooth Adapter
One antenna
One mounting bracket
RS-232 serial cable
One fused power cable
A set of four self-adhesive plastic feet
One printed Quick Start Guide
One Serial-to-Bluetooth Adapter product CD containing the adapter drivers, User Guide, Quick Start
Guide, AT Commands Reference Guide, Global Wizard software, PhoneTools (a data communications
program), and Acrobat Reader
Note: Part Supplied by User
Mounting screws (screw shaft diameter =.17" maximum)
AT Commands
AT commands for the Serial-to-Bluetooth Adapter are published in a separate Reference Guide included on the
product CD and posted on the Multi-Tech Web site.
Handling Precautions
All devices must be handled with certain precautions to avoid damage due to the accumulation of static charge.
Although input protection circuitry has been incorporated into the devices to minimize the effect of this static buildup,
proper precautions should be taken to avoid exposure to electrostatic discharge during handing and operation.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 – Description and Specifications
General Safety
The adapter is designed and intended to be used in either fixed or mobile applications. In the “Fixed” application, the
device is physically secured at one location and not easily moved to another location. In the “Mobile” application, the
device may be regularly moved to different locations.
Caution! Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s antenna and the body
of the user or nearby persons. The adapter is not designed for, nor intended to be, used in applications within 20 cm
(8 inches) of the body of the user. Such uses are strictly prohibited.
Avoid possible radio frequency (RF) interference by carefully following the safety guidelines below.
•
Switch OFF the Adapter when in an aircraft. The use of cellular telephones in aircraft is illegal. It may
endanger the operation of the aircraft and/or disrupt the cellular network. Failure to observe this instruction
may lead to suspension or denial of cellular telephone services to the offender, legal action, or both.
•
•
•
Switch OFF the Adapter in the vicinity of gasoline or diesel-fuel pumps or before filling a vehicle with fuel.
Switch OFF the Adapter in hospitals and any other place where medical equipment may be in use.
Respect restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting
operations are in progress.
•
•
There may be a hazard associated with the operation of your Adapter in the vicinity of inadequately protected
personal medical devices such as hearing aids and pacemakers. Consult the manufacturers of the medical
device to determine if it is adequately protected.
Operation of the Adapter in the vicinity of other electronic equipment may cause interference if the equipment
is inadequately protected. Observe any warning signs and manufacturers’ recommendations.
Vehicle Safety
•
•
•
Do not use your Adapter while driving.
Respect national regulations on the use of cellular telephones in vehicles. Road safety always comes first.
If incorrectly installed in a vehicle, the operation of adapter could interfere with the correct functioning of
vehicle electronics. To avoid such problems, be sure that the installation has been performed by qualified
personnel. Verification of the protection of vehicle electronics should be part of the installation.
•
The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
Maintenance of the Serial-to-Bluetooth Adapter
Your adapter is the product of advanced engineering, design and craftsmanship and should be treated with care. The
suggestions below will help you to enjoy this product for many years.
•
•
•
•
•
Do not expose the adapter to any extreme environment where the temperature or humidity is high.
Do not attempt to disassemble the adapter. There are no user serviceable parts inside.
Do not expose the adapter to water, rain or spilled beverages. It is not waterproof.
Do not abuse your adapter by dropping, knocking, or violently shaking it. Rough handling can damage it.
Do not place the adapter alongside computer discs, credit or travel cards, or other magnetic media. The
information contained on discs or cards may be affected by the phone.
•
•
The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech’s accessory
specifications may invalidate the warranty of the MultiConnect Adapter.
In the unlikely event of a fault in the adapter, contact Multi-Tech Technical Support.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 – Description and Specifications
Technical Specifications
Category
Serial Interface
Description
Supports speeds from 1200bps to 230Kbps
RF Interface
Frequency………………2402 – 2480MHz
Modulation……………...FHSS/GFSK
Channel Intervals………1MHz
Number of Channels….79CH
Transmission Rate…….721Kbps
Data Format
Flow Control
For Serial Interface - Asynchronous, 8-N-1, Default is 9600bps
Hardware
RF Receive Sensitivity -80dBm typical
Output Level (Class 1) 20dBm maximum
RF Range
Class 1 - 100 meters (330 feet)
Modes of Operation
Device Profiles
Buffer
Inquiry, Idle, Data, Fast Data, Park, Sniff, Command, Master, Slave
Serial Port (SPP), Dial-up Network (DUN)
Serial 50 bytes
RF
50-byte RX buffer
Weight
0.6 oz. (0.017 Kg.)
Dimensions
Power
1.045" x 2.541" x 0.680" (2.65cm x 6.45cm x 1.7cm)
Idle:
2mA (0.0066W @ 3.3Vdc) (0.01W @ 5Vdc)
Connected: 7mA (0.0231W @ 3.3Vdc) (0.035W @ 5Vdc)
Fast Data:
Inquiry:
Notes:
45mA (0.1485W @ 3.3Vdc) (0.225W @ 5Vdc)
70mA (0.231W @ 3.3Vdc) (0.35W @ 5Vdc)
These power measurements were taken with no LEDs connected.
Driving an LED through 330 ohm resistor to GND draws an additional
4mA on 5V for each LED.
Operational
Temperature
-40 to +70° C
Storage Temperature
Voltage
-40 to +85° C
9Vdc to 25Vdc
Default Power Up
Settings
AT Command Response Form = Long Form
Bluetooth Service Profile = Serial Port Profile {SPP}
Device Role = Slave
Baud Rate = 9600bps
Data Bits = 8 bits
Parity = None
Stop bits = 1 bit
Hardware Flow Control RTS/CTS = Enabled
Power Mode = Never go into deep sleep mode
Country Code = North America and Europe
Name of Device (local name) = Serial-to-Bluetooth Adapter
My Radio Status = 1,0 {slave, disconnected}
Service Name = COM0
Power up default ATSW24 settings = 0,0,0,0 {long response, no authentication, no
auto SCO connect, no minor}
Power up default ATSW25 settings = 0,1,0,0 {slave, data, allow data to pass, SPP}
Major & Minor Class Of Device (COD) = 00000000 {undefined}
Security PIN and Encryption Disabled
Default PIN = “default” caps sensitive
Page Scan Interval = 0x400 {2560msec.}
Page Scan Window = 0x200 {11msec.}
Inquiry Scan Interval = 0x400 {2560msec.}
Inquiry Scan Window = 0x200 {11msec.}
Timeout Connection Parameters
Inquiry = 60 seconds
Slave Connect = 60 seconds
Master Connect = 60 seconds
ATDM idle mode = 60 seconds
ATDM Master Mode = indefinitely (need to perform ATUCL to cancel last
command)
Timeout for loss of Bluetooth connection = 4 seconds
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 – Description and Specifications
Category
Intelligent Features
Description
Can be configured, commanded, and controlled through simple ASCII strings over
the Bluetooth RF link or directly through the hardware serial UART.
Low power consumption.
Secure and robust communication link.
• FHSS (Frequent Hopping Spread Spectrum)
• 56-bit encryption, and 10 alphanumeric Personal Identification Number (PIN)
• Error correction schemes for guaranteed packet delivery
Manufacturing
Information
Trade Name: MultiConnect
Model Number: MTS2BTA, MTS2BTA-R
FCC Registration: AU792U05A28780
Industry Canada: 125A-0016
Certifications
EMC Approvals:
FCC Part 15 Class B
Canada (Class B)
FCC Part 15, Subpart C
EN 300 328
EN 301 489-17
EN55022
EN55024
EN 301 489-1
Safety:
UL60950
cUL60950
EN60950
Two Years
Warranty
LED Indicators
LED
TD
Description
Transmit Data. This LED is lit when adapter is transmitting data to another adapter.
RD
Receive Data. This LED is lit when the adapter is receiving data from another adapter.
CD
Carrier Detect. This LED is lit when the adapter detects a valid carrier signal from another adapter. It is
on when the adapter is communicating with the other adapter and off when the link is broken.
TR
Terminal Ready. (Also called Data Terminal Ready.) This LED indicates the PC is turned on and ready
to communicate. This LED is lit when a data communications program initializes the adapter. It goes
off when the communications program disconnects the COM port. When it goes off, a connected
adapter will disconnect.
PWR
Power. This LED Indicates the presence of DC power when lit.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 – AT Commands, S-Registers, and Result Codes
Chapter 2 – Installation and Cabling
Step 1 – Attaching the Adapter to a Fixed
Location
The Serial-to-Bluetooth Adapter is design to be used on the desktop or to be panel-mounted. To attach the bracket
for panel-mounting, following these steps:
1. Typically, the adapter is mounted against a flat surface with two mounting screws. Drill the mounting holes at the
desired location. The mounting holes must be separated by 4 -7/16 inches center-to-center.
2. Slide the mounting bracket into the slot on the back of the chassis.
3. Attach the adapter to the surface with two screws.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 – AT Commands, S-Registers, and Result Codes
Step 2 – Connect the Adapter to Your System
Setup Example
This example shows a BlueTooth Adapter setup at a fixed site and ready to communicate with the Bluetooth
Adapter at a remote location.
Connections for the MultiModem Using AC Power
Turn off your computer. Place the adapter in a convenient location, and then connect it to your computer’s serial
port, the phone line, and AC power.
Connections for the MultiModem Using DC Power
For DC power, use the fused cable in place of the Universal Power Supply and the AC Power Cord.
Fused
Cable
Fused Cable
Connection
Installation Steps
RS-232 Connection
Plug one end of the serial cable into the RS-232 connector on the adapter and plug the other end into a serial
port connector on your computer.
Power Connection
For AC – Plug the power supply cable with attached transformer block into the power connector on the
MultiConnect. Then plug the AC cord receptacle into the transformer block, and plug the other end of the AC
cord into a power outlet or power strip.
Note: Use only the power supply supplied with the Adapter. Use of any other power supply will void the
warranty and could damage the adapter.
For DC – Plug the fused cable into the power connector on the MultiConnect. Then attach the two wires at the
other end of the fused cable to a DC power source.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 – AT Commands, S-Registers, and Result Codes
Chapter 3 – AT Commands
AT Command Reference Guide
AT commands for the Serial-to-Bluetooth Adapter are published in a separate Reference Guide included on the
product CD and posted on the Multi-Tech Web site.
Using AT Commands
Default Settings / Changing Configuration
Parameters, such as the Bluetooth Name, Service Name, Class of Device and Serial Port settings can be
viewed and configured. This can be done locally through the serial port UART or from a remote Bluetooth RF
link. To configure the Bluetooth SocketWireless device, the device must be in command mode by issuing
ATMC. While in command mode, the Bluetooth SocketWireless device will accept ASCII bytes as commands.
You can use the developer board and the RS-232 cable to connect to a PC and pass ASCII characters
through the terminal to the Bluetooth SocketWireless device. The communications settings should match the
settings used when the Bluetooth SocketWireless device connects. For example, the defaults are:
9600bps
8 bits
No Parity
1 stop bit
Hardware flow control enabled.
Once you change these parameters, you have the option to store them permanently in the non-volatile
memory.
Run your favorite terminal emulator, HyperTerminal, or other program.
• Type AT on your screen and follow it with a carriage return <cr_lf>. You should see "OK" returned to
you. This will verify that your cable and communications settings are correct. When the
SocketWireless device is not connected to another Bluetooth device, you can type the AT commands
directly into the SocketWireless' UART; e.g., you do not have to type ATMC to change from data
mode to command mode.
• Now you can enter any of the AT commands discussed in the following sections. Follow these
commands by <cr_lf>. Valid commands will return an "OK" or a valid response. Invalid commands
will reply ERROR.
• To return to data mode, type ATMD. You can now pass or receive data from a remote connected
Bluetooth device.
Notes:
• If you change communications parameter settings, remember to change your terminal or emulator
communications settings to correspond to the newly created parameter settings.
• AT commands will not echo back to the terminal.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 – AT Commands, S-Registers, and Result Codes
Setting Parameters
This section covers how to send AT commands at the PC connected to a BlueTooth Adapter to query and
set parameters for Bluetooth communication.
Example of a Slave Command Sequence
From Power Up:
1. Check and verify Communication to Slave.
Sent : AT<cr_lf>
Reply:<cr_lf>OK<cr_lf>
2. Get information on Slave Bluetooth address.
Sent : ATSI,1<cr_lf>
Reply: 12-digit address
<cr_lf>OK<cr_lf>
3. Set Slave to automatically connect in Fast Data Mode and SPP on Bluetooth connection.
Sent : ATSW25,0,0,0,0 <cr_lf>
Reply:<cr_lf>OK<cr_lf>
4. Either cycle power or send ATURST.
Note: This command sequence assumes the radio is in factory default in which it automatically comes
up and is connectable as a Slave from a Master request.
Example of a Master Discovery/Connection Sequence
From Power Up and No Connection
1. Verify local device is Master in Data Mode.
Sent: ATSi,7 <cr_lf>
Reply: <cr_lf>1,1,0,0<cr_lf>
2. If not Master, set to Master and Data Mode.
Sent: ATSW25,1,1,0,0 <cr_lf>
Reply: <cr_lf>OK<cr_lf>
3. Perform an Inquiry to obtain BT_Addresses (unless it is already known).
Sent: ATMC <cr_lf>
// Places Radio in Command Mode
Reply: <cr_lf>OK<cr_lf>
Sent: ATUCL
// Clears radio state
Reply: <cr_lf>OK<cr_lf>
Sent: ATDI,1,00000000 {Class of Device}<cr_lf>
// Looks for only one Bluetooth device
Reply: <cr_lf>00A0961F2023,00000104,SOCKETWIRELESS<cr_lf>DONE<cr_lf>CONNECT
<cr_lf>
4. Perform a Master Connect over SPP using the BT_Address.
Sent : ATDM, 00A0961F2023,1101<cr_lf>
// SPP connection
Reply:<cr_lf>CONNECT,00A0961F008F <cr_lf>
// Returns Slave BT address radios is in data
mode
5. Place radio into Fast Data Mode.
Sent : ATMC <cr_lf>
Reply:<cr_lf>OK<cr_lf>
Sent : ATMF<cr_lf>
// Places Radio in Command Mode
// Places radio in Fast Data Mode
Reply:<cr_lf>OK<cr_lf>
6. Send Data.
Note about Sending Commands from the Slave When the Slave Connects in Fast Data Mode
(ATSW25/or issuing ATMF)
All valid AT commands sent through the Slave's UART will be interpreted and responded by the Master as
if it were the local Slave radio. Basically, in this configuration from the Slave end, you can obtain status
and configure the remote Master radio. This is a unique feature that may be useful in some applications,
but it can be confusing if you think you are talking to the Slave.
To Get Out of Data Mode and Check Status
1. Delay at least 50 milliseconds; this could be less or more.
2. Perform a Set Command Mode.
Sent : ATMC<cr_lf>
Reply:<cr_lf>OK<cr_lf>
3. Delay at least 50 milliseconds.
4. Check Status, perform a Disconnect …
Sent : AT<cr_lf>
Reply:<cr_lf>OK<cr_lf>
Note about Being Connected in Fast Data Mode
If connected in Fast Data Mode, it is necessary to reset the device to break the connection.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 – AT Commands, S-Registers, and Result Codes
Test Procedures Using AT Commands
The following tesing procedures can be used with the MTS2BTA and the MTS2BTSMI.
1. Connect serial cable from computer to DB9 connector of each MTS2BTA, then attach antenna and power.
Do this for both master and slave Bluetooth adapters.
2. Use terminal emulator like Hyperterminal or ZOC to communicate to Bluetooth socket modem using AT
command set. Set baud rate to 9600bps. If MTS2BTA has label with different baud rate then set emulator
to match with this baud rate.
3. If necessary, can retrieve address from Bluetooth module being tested.
Sent: ATSI,1<cr_lf>
Reply: OK<cr_lf>
Reply: <cr_lf>12-digit address <cr_lf>OK<cr_lf>
4. Issue these AT commands at slave Bluetooth device to prepare for wireless connection and transfer data
between modules.
•
•
•
How to set to Slave, Fast Data Mode and DUN.
Sent : ATSW25,0,0,0,1 <cr_lf>
Reply: OK<cr_lf>
Or how to set to Slave, Fast Data Mode and SPP.
Sent : ATSW25,0,0,0,0 <cr_lf>
Reply: OK<cr_lf>
Reset slave Bluetooth device.
Sent : ATURST <cr_lf>
// Resets radio, wait 5 seconds
Reply: OK<cr_lf>
5. Issue these AT commands at master Bluetooth device to generate a wireless connection and transfer data
between modules.
•
•
•
How to set to Master, Fast Data Mode and DUN.
Sent : ATSW25,1,0,0,1 <cr_lf>
Reply: OK<cr_lf>
Or how to set to Master, Fast Data Mode and SPP.
Sent : ATSW25,1,0,0,0 <cr_lf>
Reply: OK<cr_lf>
Perform an Inquiry to detect BT_Address (unless it is already known) of slave Bluetooth device.
Sent : ATURST <cr_lf>
// Resets radio, wait 5 seconds
Reply: OK<cr_lf>
Sent : ATDI,1,00000000 {Class of Device} <cr_lf>
Reply: OK<cr_lf>
// Looks for only one Bluetooth device
// Search completed when DONE appears
Reply: <cr_lf>00A0961F2023,00000104,SOCKETWIRELESS<cr_lf>
Reply: <cr_lf>DONE<cr_lf>
•
•
•
Perform a Master Connect over SPP using the BT_Address.
Sent : ATDM, 00A0961F2023,1101<cr_lf>
Reply: OK<cr_lf>
// SPP connection
Reply:<cr_lf>CONNECT,00A0961F008F <cr_lf>
// Returns Slave BT address radios is in data
mode
Or perform a Master Connect over DUN using the BT_Address.
Sent : ATDM, 00A0961F2023,1103<cr_lf>
Reply: OK<cr_lf>
// DUN connection
Reply:<cr_lf>CONNECT,00A0961F008F <cr_lf>
// Returns Slave BT address radios is in
data mode
Send and receive Data by transferring file or holding down key on keyboard.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 – AT Commands, S-Registers, and Result Codes
Disabling Flow Control Using AT Commands
Using terminal screen with flow control enabled, issue commands to turn off flow control.l.
Sent : ATSW22,3,1,0 <cr_lf>
Reply: OK<cr_lf>
// Set PIO3 as output and do not store in flash
Sent : ATSW23,3,1,0<cr_lf>
Reply: OK<cr_lf>
// Set PIO3 output high and do not store in flash
To store setting in flash:
Sent : ATSW22,3,1,1 <cr_lf>
Reply: OK<cr_lf>
// Set PIO3 as output and store in flash
// Set PIO3 output high and store in flash
Sent : ATSW23,3,1,1<cr_lf>
Reply: OK<cr_lf>
Now can communicate with Bluetooth device with flow control turned off.
Configuring to Use DTR for Resetting the
MTS2BTA Using AT Commands
Using terminal screen issue commands so when DTR goes off the adapter is reset.
Sent : ATSW22,6,1,0 <cr_lf>
Reply: OK<cr_lf>
// Set PIO6 as output and do not store in flash
Sent : ATSW23,6,0,0<cr_lf>
Reply: OK<cr_lf>
// Set PIO6 output low and do not store in flash
To store setting in flash:
Sent : ATSW22,6,1,1 <cr_lf>
Reply: OK<cr_lf>
// Set PIO6 as output and store in flash
// Set PIO6 output low and store in flash
Sent : ATSW23,6,0,1<cr_lf>
Reply: OK<cr_lf>
Now can communicate with Bluetooth device and when serial connection is terminated (DTR goes off) the Bluetooth
adapter will reset.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 – Peripheral Devices
Chapter 4 – Peripheral Devices
Antenna Requirements
Frequency Range
Impedance
VSWR
2.4-2.5 Ghz
50 ohm nominal
<2.0:1
Gain
2 dBi
Radiation
Polarization
Wave
Omni
Vertical
Half Wave Dipole
Reverse Polarity SMA Plug
Connector
An antenna that meets the requirements for use with the SocketWireless product can be ordered, for
example, from Nearson.
Part number: S131AH – 2450S
Pin Assignments for the Serial Port
Female DB9
MultiConnect Adapter Side
PC Side
Carrier Detect
1
2
3
4
5
6
7
8
9
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request to Send
Clear to Send
Ring Indicator
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Regulatory Compliance
Appendix A – Regulatory Compliance
Regulatory Compliance Statements
EMC, Safety, and R&TTE Directive Compliance
The CE mark is affixed to this product to confirm compliance with the following European Community
Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States
relating to electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States
relating to electrical equipment designed for use within certain voltage limits;
and
Council Directive 1999/5/EC of 9 March on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity.
International Adapter Restrictions
Some dialing and answering defaults and restrictions may vary for international adapters. Changing settings
may cause a adapter to become non-compliant with national telecom requirements in specific countries.
Also note that some software packages may have features or lack restrictions that may cause the adapter to
become non-compliant.
Telecom Requirements for the United States
FCC Part 15 Regulation
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Plug the equipment into an outlet on a circuit that is different from the one used by the receiver.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference that may cause undesired operation.
WARNING – Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel
brouilleur.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – Regulatory Compliance
New Zealand Telecom Warning Notice
1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates
no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that any product is
compatible with all of Telecom’s network services.
This equipment is not capable under all operating conditions of correct operating conditions of
correct operation at the higher speed which it is designated. 33.6 kbps and 56 kbps connections
are likely to be restricted to lower bit rates when connected to some PSTN implementations.
Telecom will accept no responsibility should difficulties arise in such circumstances.
2. Immediately disconnect this equipment should it become physically damaged, and arrange for its
disposal or repair.
3. This adapter shall not be used in any manner which could constitute a nuisance to other Telecom
customers.
4. This device is equipped with pulse dialing, while the Telecom standard is DTMF tone dialing. There
is no guarantee that Telecom lines will always continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may
give rise to 'bell tinkle' or noise and may also cause a false answer condition. Should such
problems occur, the user should NOT contact the Telecom Faults Service.
The preferred method of dialing is to use DTMF tones, as this is faster than pulse (decadic) dialing
and is readily available on almost all New Zealand telephone exchanges.
5. Warning Notice: No '111' or other calls can be made from this device during a mains power failure.
6. This equipment may not provide for the effective hand-over of a call to another device connected to
the same line.
7. Some parameters required for compliance with Telecom’s Telepermit requirements are dependent
on the equipment (PC) associated with this device. The associated equipment shall be set to
operate within the following limits for compliance with Telecom’s Specifications:
For repeat calls to the same number:
•
There shall be no more than 10 call attempts to the same number within any 30 minute
period for any single manual call initiation, and
•
The equipment shall go on-hook for a period of not less than 30 seconds between the end
of one attempt and the beginning of the next attempt.
For automatic calls to different numbers:
•
The equipment shall be set to ensure that automatic calls to different numbers are spaced
such that there is no less than 5 seconds between the end of one call attempt and the
beginning of another.
8. For correct operation, total of the RN’s of all devices connected to a single line at any time should
not exceed 5.
South African Statement
This adapter must be used in conjunction with an approved surge protection device.
Other
The above country-specific examples do not cover all countries with specific regulations; they are included
to show you how each country may differ. If you have trouble determining your own country's requirements,
check with Multi-Tech's Technical Support for assistance.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B – Multi-Tech Warranty Statement and Product Repair
Appendix B – Multi-Tech Warranty
Statement and Product Repair
Warranty
Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or
workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of
purchase is not provided, two, five, or ten years (depending on model) from date of shipment.
MTS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
This warranty does not apply to any products which have been damaged by lightning storms, water, or power surges
or which have been neglected, altered, abused, used for a purpose other than the one for which they were
manufactured, repaired by Customer or any party without MTS’s written authorization, or used in any manner
inconsistent with MTS’s instructions.
MTS’s entire obligation under this warranty shall be limited (at MTS’s option) to repair or replacement of any products
which prove to be defective within the warranty period or, at MTS’s option, issuance of a refund of the purchase price.
Defective products must be returned by Customer to MTS’s factory — transportation prepaid.
MTS WILL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES, AND UNDER NO CIRCUMSTANCES WILL ITS
LIABILITY EXCEED THE PRICE FOR DEFECTIVE PRODUCTS.
Online Warranty Registration
If you have access to the World Wide Web, you can register your Multi- Tech product online at the following URL:
Product Repair
Repair Procedures for U.S. and Canadian Customers
In the event that service is required, products may be shipped, freight prepaid, to our Mounds View, Minnesota
factory:
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
Attn: Repairs, Serial # ____________
A Returned Materials Authorization (RMA) is not required. Return shipping charges (surface) will be paid by MTS
to destinations in U.S. and Canada.
Please include, inside the shipping box, a description of the problem, a return shipping address (must have street
address, not P.O. Box), your telephone number, and if the product is out of warranty, a check or purchase order
for repair charges.
For out of warranty repair charges, go to www.multitech.com/DOCUMENTS/Company/warranty/
Extended two-year overnight replacement service agreements are available for selected products. Please call
MTS customer service at (888) 288-5470 or visit our web site at www.multitech.com/PARTNERS/Programs/orc/
for details on rates and coverage’s.
Please direct your questions regarding technical matters, product configuration, verification that the product is
defective, etc., to our Technical Support department at (800) 972-2439 or email [email protected]. Please
direct your questions regarding repair expediting, receiving, shipping, billing, etc., to our Repair Accounting
Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or
user-caused damages are billed on a time-plus-materials basis.
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C – Warranty and Service
Repair Procedures for International Customers (Outside U.S.A. and Canada)
Your original point of purchase Reseller may offer the quickest and most economical repair option for your Multi-
Tech product. You may also contact any Multi-Tech sales office for information about the nearest distributor or
other repair service for your Multi-Tech product. The Multi-Tech sales office directory is available at
In the event that factory service is required, products may be shipped, freight prepaid to our Mounds View,
Minnesota factory. Recommended international shipment methods are via Federal Express, UPS or DHL courier
services, or by airmail parcel post; shipments made by any other method will be refused. A Returned Materials
Authorization (RMA) is required for products shipped from outside the U.S.A. and Canada. Please contact us for
return authorization and shipping instructions on any International shipments to the U.S.A. Please include, inside
the shipping box, a description of the problem, a return shipping address (must have street address, not P.O.
Box), your telephone number, and if the product is out of warranty, a check drawn on a U.S. bank or your
company’s purchase order for repair charges. Repaired units shall be shipped freight collect, unless other
arrangements are made in advance.
Please direct your questions regarding technical matters, product configuration, verification that the product is
defective, etc., to our Technical Support department nearest you or email [email protected]. When calling
the U.S., please direct your questions regarding repair expediting, receiving, shipping, billing, etc., to our Repair
Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or
user-caused damages are billed on a time-plus-materials basis.
Repair Procedures for International Distributors
International distributors should contact their MTS International sales representative for information about the
repairs for their Multi-Tech product.
Please direct your questions regarding technical matters, product configuration, verification that the product is
defective, etc., to our International Technical Support department at +(763)717-5863. When calling the U.S.,
please direct your questions regarding repair expediting, receiving, shipping, billing, etc., to our Repair
Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or
user-caused damages are billed on a time-plus-materials basis.
Replacement Parts
SupplyNet, Inc. can supply you with replacement power supplies, cables, and connectors for selected Multi-Tech
products. You can place an order with SupplyNet via mail, phone, fax, or the Internet at the following addresses:
Mail:
SupplyNet, Inc.
614 Corporate Way
Valley Cottage, NY 10989
800 826-0279
Phone:
Fax:
914 267-2420
Email:
Internet:
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
A
N
AC power connections......................................................10
Antenna Requirements......................................................15
Applications........................................................................4
AT commands...................................................................11
New Zealand Telecom Warning Notice ........................... 17
O
Ordering Replacement Parts............................................. 19
B
P
Build Options......................................................................5
Package Contents ............................................................... 5
Parts Supplied by User....................................................... 5
Pin Assignments............................................................... 15
Power Connection ............................................................ 10
Power LED......................................................................... 8
Product Description............................................................ 4
C
Canadian Regulations .......................................................16
Carrier Detect .....................................................................8
Changing Bluetooth Configurations .................................11
Connecting the AC Power ................................................10
R
D
Receive Data ...................................................................... 8
Register your adapter ....................................................... 18
Repair............................................................................... 18
Replacement Parts............................................................ 19
RS-232 Connection .......................................................... 10
DC power connections......................................................10
E
EMC Approvals..................................................................8
EMC, Safety, and R&TTE Directive Compliance............16
S
F
Safety Certifications........................................................... 8
Setting Parameters............................................................ 12
Setup Example ................................................................. 10
Slave command sequence................................................. 12
South African Statement, Regulations.............................. 17
FCC Regulations...............................................................16
Flow control......................................................................14
G
General Safety ....................................................................6
T
Technical Specifications .................................................... 7
Terminal Ready.................................................................. 8
Tesing procedures ............................................................ 13
Transmit Data..................................................................... 8
H
Handling Precaution ...........................................................5
I
Installation ..........................................................................9
International Restrictions..................................................16
U
Use DTR for Resetting..................................................... 14
L
V
LED Indicators ...................................................................8
Vehicle Safety.................................................................... 6
M
W
Maintenance of the Adapter................................................6
Warranty............................................................................. 8
Warranty Statement.......................................................... 18
Master Discovery/Connection Sequence ..........................12
Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|