Mountain Buggy Carrycot
Instruction Manual
A
SS
E
D
S
T
E
F
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on your purchase of a Mountain Buggy carrycot.
We know how precious and inspiring a new little person can be in your world. It’s so
important to be able to show your baby to the world and just as important to show the
world to your baby.
At Mountain Buggy you and your baby matter to us. That’s why we have spent years
researching and developing a product that is safe, comfortable and in tune with
modern parents needs. We want you to be able to live your new family lifestyle with all
the freedom and satisfaction you have always experienced.
We also know that many parents use strollers incorrectly and as a result may put
their children at risk. Please take the time to read through this manual carefully. Your
Mountain Buggy carrycot will provide you with optimum safety if you follow the
instructions as detailed.
If you have any concerns, questions or comments about your Mountain Buggy carrycot
or how to use it, please do not hesitate to contact us. We’d love to hear from you.
Fitting a carrycot to your buggy is simple. However, it is important to follow the correct
instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
For the sake of your precious passenger, please
read these warnings before using your Mountain
Buggy Carrycot.
2
Important:
Please read instructions carefully, follow them strictly and keep these instructions for
future reference. Your child’s safety is your responsibility and may be compromised if you
do not follow these instructions.
Warning
•
Carrycot is suitable for newborns through to 6 months old, or until baby can sit up
unaided.
•
•
Baby must not be in Carrycot when it is being fastened or removed from the stroller
frame.
Depth from top of mattress to top of side of Carrycot at any position within 300mm/11.8in
from harness attachment points, should not be reduced to less than 150mm/5.5in when
mattress is in position. Mattresses purchased separately should conform to BS 1877 part
10.
•
•
•
Do not add a mattress thicker than 25mm.
Check snap locks are closed and firmly attached to frame so Carrycot will not tip or fall.
Check Carrycot is horizontal and located correctly onto stroller frame. Refer back to
diagrams for your model to ensure positioning of snap locks is correct.
•
Do not use Carrycot if you are unable to secure it to stroller frame. In this case contact
store where stroller was purchased for more help.
•
•
Check that Carrycot attachment devices are correctly engaged before use.
Always remove Carrycot before folding stroller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing your Stroller to fit the Carrycot
Before you can attach the Carrycot to your stroller you will need to remove the fabric
sunhood and seat on your stroller.
Removing the Sunhood
1.
Standing beside your stroller and using a
reasonable degree of force, pull the sunhood
support wire towards you (by about 50mm/2in).
2.
3.
Remove support wire W from sunhood bush J on
the side nearest to you.
Unfasten sunhood domes that
attach the sunhood to stroller
frame and to stroller seat back.
W
J
Removing the Seat
1.
2.
Unfasten domes on seat that attach to frame.
Urban (Jungle) Only: unfasten strap
underneath seat at point A.
3.
Terrain Only: remove seat support wire from
stroller frame at C and D. Push seat forward,
then slide fabric off seat
support wire.
A
C D
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Preparing your Stroller (continued)
IMPORTANT INFORMATION FOR DOUBLE AND
TRIPLE STROLLERS
›››
If you have a double or triple stroller you will need to remove the centre metal bars of the
frame to release the domed fabric. You may then need to reattach the metal bars without
the fabric, depending on whether you are attaching a Double or a Twin Carrycot. See chart
below.
How to remove the centre bar(s)
Centre bar
1.
Terrain only: undo seat base nut with a spanner at
point F and remove hinge pin from seat base.
H
F
2.
Urban and Terrain models: unfasten wing nut at
point G and remove centre bar at both ends (points
G and H).
Seat base
Heel
rest
G
Double Stroller Frame
Triple Stroller Frame
Twin
Carrycot
No centre bar
No centre bar on side attaching Twin
Carrycot. Centre bar remains on side not
accommodating Twin Carrycot.
Double
Carrycot
Centre bar required.
Centre bar required.
Remove hammock fabric
from seat you wish to
replace with Carrycot.
Remove hammock fabric from seat you
wish to replace with Carrycot. Double
Carrycot can only be fitted to outside
seat positions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitting your Carrycot to your Stroller
Mountain Buggy offer a range of carrycot and stroller combinations, so please choose the
instructions you need to follow from the list below based on which carrycot model you are
wanting to attach to which stroller.
Single Stroller
Double Stroller
Triple Stroller
Single Carrycot
Double Carrycot
Twin Carrycot
Configuration 1
Configuration 2
Configuration 1
Configuration 2
Configuration 2
Instructions for Configuration 1 are located on pages 6-7
Instructions for Configuration 2 are located on pages 8-10
Examples of Carrycot combinations
Double Stroller with
2 Double Carrycots
Double Stroller with
Twin Carrycot
Triple Stroller with
1 Double and 1 Twin
Carrycot
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Configuration 1 Instructions
PLEASE FOLLOW THESE INSTRUCTIONS IF YOU
›››
ARE FITTING:
a: a Single Carrycot to a Single Stroller
b: a Twin Carrycot to a Double Stroller
Fitting the Snap Locks to the Carrycot
PARTS LIST
Preparation
You will need to have all components on the parts list
shown to fit Carrycot to your stroller.
Carrycot
Have a look at sides of Carrycot. There are three holes
4 x snap locks
on each side of Carrycot to allow snap locks to be fitted.
Configuration varies depending on the Mountain Buggy
model you have.
Allen key
2 x screws
•
Two snap locks are fitted to each side of Carrycot.
The unused hole can be fitted with the spare screw
and cover button.
2 x cover buttons
A
How to fit the Snap Locks
1.
Place one snap lock over hole A. Make sure it is
aligned correctly with the hole in Carrycot.
2.
Using Allen key, rotate screw in snap lock in
clockwise direction until screw is tight. Snap lock
will still be able to rotate but is firmly attached.
3.
4.
Connect second snap lock according to model
directions below.
URBAN
A
Repeat on other side.
C
B
For Urban (Jungle) models
5.
6.
Fit second snap lock to position B.
TERRAIN
Fit small screw and cover button to hole C.
For Terrain Models
C
A
5.
6.
Fit second snap lock to position C.
B
Fit small screw and cover button to hole B.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration 1 Instructions (continued)
Fitting the Carrycot to the Frame
1.
Ensure snap locks are rotated so screw holes are
on top.
✘
2.
3.
Open snap locks.
Place Carrycot onto Buggy frame. Confirm
positioning as pictured below.
✔
TERRAIN
URBAN
X
X
Y
Y
tube joint
sunhood joint
Place snap lock X directly above
sunhood joint
Place snap lock Y directly above tube joint
4.
Push snap locks firmly down flat, making sure you hear the lock ‘click’, indicating
they are fully locked.
Fitting the Feet to the Carrycot
1.
Take one foot and place provided screw through
hole in narrow end of foot.
2.
Screw whole unit into one of the 4 holes located
on bottom of Carrycot.
3.
4.
Ensure foot is screwed tightly.
Repeat process for all 4 feet.
To remove: unscrew each foot from bottom of Carrycot.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Configuration 2 Instructions
PLEASE FOLLOW THESE INSTRUCTIONS IF YOU
›››
ARE FITTING:
a: a Double Carrycot to a Double Stroller
b: a Double Carrycot to a Triple Stroller
c: a Twin Carrycot to a Triple Stroller
Fitting the Snap Locks and Slider Plate to the Carrycot
Preparation
Make sure you have all the necessary
parts as outlined in this picture.
PARTS LIST
Carrycot
NB: The sliding plates part kit is
not supplied with a twin carrycot
and will need to be separately
purchased to attach the twin to
a triple stroller. Also note that the
snap locks used in Configuration 1
are different from those used in this
instruction.
SLIDING PLATE PARTS KIT
1 x cover buttons
2 x snap locks
1 x sliding plate
2 x screws
1 x screw
1 x Allen key
Work out which side you want to
attach the Carrycot to. If you want to position the Carrycot onto the right side of stroller,
put the snap locks onto the right side of the Carrycot and the sliding plate onto the left. To
position the Carrycot onto the left side of the stroller the snap locks go on the left side of
the stroller and the sliding plate on the right.
NB: Left and right are considered from the point of view of the user when they are
pushing the buggy.
Attaching Snap Locks
1.
Place one snap lock over hole A. Make sure it is
aligned correctly with the hole in Carrycot.
A
2.
Using Allen key, rotate screw in snap lock in
clockwise direction until screw is tight. Snap lock
will still be able to rotate but is firmly attached.
3.
Connect second snap lock according to model
directions for Urban or Terrain.
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration 2 Instructions (continued)
For Urban (Jungle) models
URBAN
5.
6.
Fit second snaplock to position B.
A
Fit small screw and cover button to hole C.
C
B
For Terrain Models
TERRAIN
5.
6.
Fit second snap lock to position C.
Fit small screw and cover button to hole B.
C
A
B
Fitting the Sliding Plate to the Carrycot
•
•
Position sliding plate on opposite side of Carrycot to snap locks.
Sliding plate screws are located at Holes A and C in side of Carrycot. Hole B is not
required.
•
There are 4 screw holes in sliding plate. Use diagram below to locate which two
holes are required for your stroller model.
1
4
2
3
Urban
•
Align Hole 1 of sliding plate with Hole A of Carrycot.
URBAN
1
Align Hole 3 of sliding plate with Hole C of Carrycot.
•
Place screws into Holes 1 and 3. Using Allen key,
tighten in a clockwise direction.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Configuration 2 Instructions (continued)
Terrain
TERRAIN
1
•
Align Hole 1 of sliding plate with Hole A of Carrycot.
Align Hole 2 of sliding plate with hole C of Carrycot.
•
Place screws into Holes 1 and 2. Using Allen key,
tighten in a clockwise direction.
2
Warning: check that Carrycot attachment devices are correctly engaged before use.
Fitting the Carrycot to the Frame
1.
2.
3.
Ensure snap locks are rotated so screw holes are on top.
Open snap locks.
Place Carrycot between side tube and centre bar of
stroller. Locate centre bar lug then move sliding plate
down centre bar until groove in sliding plate locks onto
located lug.
4.
Push snap locks firmly down flat, making sure you hear
the lock ‘click’, indicating they are fully locked.
To fit a second Double Carrycot onto a Double or Triple Stroller
repeat above instructions.
To remove Carrycot from frame: open snap locks and lift Carrycot off frame.
Fitting the Feet to the Carrycot
1.
Take one foot and place provided screw through
hole in narrow end of foot.
2.
Screw whole unit into one of the 4 holes located
on bottom of Carrycot.
3.
4.
Ensure foot is screwed tightly.
Repeat process for all 4 feet.
To remove: unscrew each foot from bottom of Carrycot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERNATIONAL DISTRIBUTORS
Mountain Buggy New Zealand & Head Office
Japan
Office U Corporation
2-22-8, Higashi Kawaguchi, Kawaguchi City,
Saitama Prefecture, Japan 333-0801
Ph: (048) 294 7211 Mob: (090) 3137 1234
Fax: (048) 297 7207
Freepost 4432 (within New Zealand)
PO Box 38-781, Wellington Mail Centre,
New Zealand
Ph: (04) 568 1590 or 0800 428 449
Fax: (04) 569 6239
Email: info@mountainbuggy.com
Singapore & Hong Kong
Mountain Buggy Asia
Australia
Mountain Buggy Australia
223A East Boundary Road
East Bentleigh, Victoria 3165, Australia
Ph: (03) 9570 2833
Fax: (03) 9570 1362
Email: info@mountainbuggy.com.au
PO Box 603, 144 Upper Bukit Timah Rd #04-16-17
Beauty World Centre, Singapore 588177
Ph/Fax: 800 641 1169 (Singapore)
Ph/Fax: 800 967 726 (Hong Kong)
Email: mtnbuggy@singnet.com.sg
USA
Sycamore Kids Inc.
U.K. & Ireland
Mountain Buggy (UK) Ltd
Mill Farm, Fairmile, Ottery St Mary
Devon EX11 1LS, England
Ph: ++44 01 404 815 555
208 Commerce Drive, Fort Collins, CO 80524 USA
Toll Free Phone/Fax: 866 524 8805
Email: support@mountainbuggyusa.com
or 07000 4 BUGGY (07000 428 449)
Fax: ++44 01 404 815 444
Email: info@mountainbuggy.co.uk
Canada
Mountain Buggy Canada Inc
4298 Capilano Road, North Vancouver, B.C., V7R 4J7,
Canada
Europe
One Tree Hill
Toll Free Phone: 1866 MTNBUGGY (1866 686 28449)
Email: info@mountainbuggy.ca
Postbus 4, 3130 AA Vlaardingen, The Netherlands
Ph: ++31(0) 182 551 895
Fax: ++31(0) 182 551 457
Email: info@onetreehill.nl
South Africa
Suffolk Trading CC
PO Box 2990, Cape Town 8004, South Africa
Ph: ++27 11 485 3458
Fax: ++27 11 485 5273
Email: lsacks@iafrica.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Miele Washer W 3228 User Manual
Mr Coffee Coffeemaker 115949 User Manual
National Instruments Network Router cFP PWM 520 User Manual
Nokia Headphones BH 205 User Manual
Oregon Scientific Radar Detector BAR206 User Manual
Panasonic Camcorder AJ HD1800E User Manual
Panasonic Cordless Drill EY7440 U1 User Manual
Panasonic Network Card BL PA300KTA User Manual
Panasonic Personal Computer CT T2 User Manual
Panasonic Vacuum Cleaner MC CL310 User Manual