Operating instructions
for Washing machine
W 2888 WPS
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed and used for the
first time.
G
M.-Nr. 06 559 470
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of your old appliance or machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Reminder to remove transport struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Running your first programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Calibrating the load sensor to zero. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Washing environmentally and economically. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Choosing the correct Extra options (Soak, Pre-wash, Intensive) . . . . . . . . . . . 14
When drying with a tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Favourite programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting/changing a favourite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Saving a favourite programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Intensive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Rinse hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Soak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adding detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Rinse and interim spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To omit the final spin (Rinse hold). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To omit rinse and interim spin and the final spin . . . . . . . . . . . . . . . . . . . . . . . 26
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To cancel a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To interrupt a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To change a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 35
Electronic programme locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Automatic dispensing of fabric conditioner or liquid starch to laundry
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Colour run and dye removers / dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
What to do, if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Problems with the load size indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
The drum door cannot be opened by pressing the a button . . . . . . . . . . . . . . . 46
Opening the drum door in the event of a blocked drain outlet and/
or power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Opening the drum door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Changing the lamp for the drum lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Note for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
To open the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Keypad tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Display contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Stand-by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Miele{home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
To close the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
The electrical safety of this
To avoid the risk of accidents and
machine can only be guaranteed
when continuity is complete between
the machine and an effective earthing
system which complies with local and
national regulations. It is most important
that this basic safety requirement is
present and regularly tested and where
there is any doubt the household wiring
system should be inspected by a
qualified electrician.
damage to the machine please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, use and maintenance.
Keep these operating instructions in
a safe place and ensure that new
users are familiar with the content.
Pass them on to any future owner of
the machine.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
Correct usage
Do not connect the machine to the
mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
machine (e.g. danger of overheating).
Only use the washing machine to
wash items which are specified by
the manufacturer to be machine-wash-
able on the wash-care label, and tex-
tiles composed of hand-washable wool
or wool blend fabrics as well as satin,
lace, silk and other hand-washable
garments.
Any other applications may be danger-
ous. The manufacturer is not liable for
damage resulting from improper use or
operation.
The machine is built in accordance
with current safety requirements.
Unauthorised repairs could result in
unforeseen dangers for the user, for
which the manufacturer cannot accept
liability. Repairs should only be
undertaken by a Miele approved
technician.
Technical safety
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
Before setting up the machine,
check it for any externally visible
damage. Do not install and use a
damaged machine.
The machine is only completely
isolated from the electricity supply
when:
Before connecting the machine,
ensure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is withdrawn.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
The Miele "Water protection
system" protects from water
damage provided the following
conditions have been met:
Do not install your washing
machine in rooms where
temperatures below freezing may
occur. Frozen hoses may burst under
pressure. The reliability of the electronic
control unit may be impaired at
temperatures below freezing point.
– the machine is correctly plumbed in
and connected to the electricity
supply.
Before using the machine for the
first time, check that the transit
fitting at the rear of the machine has
been removed (see section on
"Installation"). During spinning, a transit
fitting which is still in place may result in
damage to both the machine and
adjacent furniture or appliances.
– if a fault has been identified, the
machine must be examined by a
competent person before further use,
and repaired if necessary.
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
Turn off the stopcock if the
machine is to be left for any length
of time (e.g. holiday), especially if there
is no floor drain (gully) in the immediate
vicinity.
If the connection cable is faulty it
must only be replaced by a Miele
approved service technician to protect
the user from danger.
Flooding danger
In countries where there are areas
If hooking the drain hose into a
which may be subject to infestation wash basin, check that the water can
by cockroaches or other vermin, pay
particular attention to keeping the
machine and its surroundings in a
clean condition at all times. Any
damage which may be caused by
drain off quickly enough to prevent the
sink from overflowing.
Make sure the drain hose is secure, so
that the force of the water flowing out of
the hose does not dislodge it.
cockroaches or other vermin will not be Otherwise this will result in flooding.
covered by the machine guarantee.
Take care to ensure that foreign
objects (e.g. nails, pins, coins,
paper clips) do not find their way into
Use
the machine with the laundry. These
may damage components of the
machine (e.g. suds container, drum),
which in turn can result in damage to
the laundry.
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and safety instructions
If the correct amount of detergent
is dispensed, the machine should
not need to be descaled. If, however,
you do wish to descale the machine
only use proprietary non-corrosive
descaling agents and strictly observe
the instructions on the packaging. If in
doubt, contact the Miele Customer Ser-
vice Dept. or your Miele Dealer.
Safety with children
This machine is not a toy! To avoid
the risk of injury do not allow
children to play on or near it or to play
with the controls. Supervise its use by
the elderly or infirm, and supervise
children whilst you are operating the
machine.
For machines with a ‘porthole’
door, remember that the porthole
glass will be hot when washing at very
high temperatures. Do not let children
touch it.
Textiles which have been
pre-treated in solvent based
cleaning agents must be thoroughly
rinsed in clean water before being
washed in the machine.
Never use solvent based cleaning
agents in this machine, as this may
result in damage to component parts
and create toxic fumes. Such
detergents also pose a fire and
explosion hazard.
Accessories
Accessory parts may only be fitted
when expressly approved by Miele.
If other parts are used, guarantee,
performance and product liability
claims will be invalidated.
Only use dyes specified by the
manufacturer as being suitable for
use in a domestic washing machine.
Always observe the manufacturer's
instructions carefully.
Disposal of your old machine
Before discarding an old machine,
switch it off at the wall socket and
unplug it. Render the plug useless. Cut
off the cable directly behind the
appliance to prevent misuse. This
should be done by a competent
person.
Colour run and dye removers
contain sulphur compounds which
can cause damage such as corrosion.
Do not use these products in this
machine.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
Always make sure the drum is
stationary before reaching in to
remove washing. Reaching into a
moving drum is extremely dangerous.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Control panel
aDisplay
dPC / Optical interface
See the following pages for more
information.
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
bShort cut buttons
For selecting an individual washing
programme quickly. These buttons
can be programmed to select your
own favourite wash programmes.
future.
eMulti-function selector
This is used to select menu options
(by turning it) and to confirm your
selection (by pressing it).
cStart button
fs button
For switching the washing machine
on and off.
ga button
Opens the machine door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Displays
Entry menu
1
COTTONS UNI.
MINIMUM IRON
DELICATES
60°C PROG. SELECTION ...
40°C SETTINGS F ...
40°C
2
3
4
WOOLLENS H
40°C 15:00
When the machine is switched on, the entry menu (with
factory default settings) appears and Prog. Selection is
highlighted.
Multi-function selector
Turning the multi-function selector moves the highlighting to
the next menu option.
Pressing the multi-function selector selects the highlighted
menu option.
Short cut buttons
Pressing a short cut button selects one of the four favourite
programmes, which appear on the left of the display. You can
customise the favourite programmes to suit your own
requirements.
The short cut buttons have different functions in the other
menus. Where this is the case, an arrow H will appear in the
display above the short cut button, together with a
description of its function .
Programme selection
There are two ways of selecting a programme:
– Option 1: Select the Prog. Selection menu in the display
and confirm your selection by pressing the multi-function
selector.
– Option 2: Press short cut button 1, 2, 3 or 4. This will
automatically take you into the main menu of that
programme.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Programme Selection menu
PROGRAMME
SELECTION
Back A
COTTONS HYG.
COTTONS UNI.
MINIMUM IRON
H
You can use the multi-function selector to select any
programme. The highlighting will move up or down
depending on the direction the multi-function selector is
turned in. The HV arrows on the right of the display, indicate
further options. Pressing the multi-function selector takes you
to the main menu of the wash programme selected.
Wash programme main menu
COTTONS UNI.
60°C
1800 rpm
Duration: 1:06 h
Extras
Timer Y
Detergent
Back A
H
H
H
H
Turn the multi-function selector to select and highlight the
programme, temperature and spin speed. Pressing the
multi-function selector selects the highlighted option and
opens the relevant sub-menu.
The sub-menus Extras, Timer and Detergent can be opened
by pressing the short cut button directly below them.
You return to the entry menu by pressing short cut button 4
below Back.
Settings menu
The Settings menu is used to alter the washing machine's
electronics to suit different requirements. See "Settings menu"
for more details.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Before using the machine for the first time ensure that it is
correctly installed and connected. See "Installation and
connection". Also check that the drain filter is securely
tightened to prevent the risk of water leaks during use.
The washing machine has a sensor which measures the
amount of laundry in the drum. This determines the amount
of detergent required. To allow the load size indicator to
function correctly, you must first run a wash programme
without any laundry and without detergent.
^ Open the stopcock.
^ Press the s button in.
If the washing machine is being switched on for the first time,
the welcome screen will appear.
The welcome screen will not appear again once a
programme lasting longer than 1 hour has been
completed.
Reminder to remove transport struts
To avoid the risk of damage, the transport struts must be
removed before the washing machine is used for the first
time. See "Installation and connection" for instructions on
how to do this.
^ Remove the transport struts (if this has not already been
done by your fitter). Then confirm that you want to continue
by pressing short cut button 4.
Setting the time of day
12:00
Set time of day.
^ Set the hour with the multi-function selector and confirm
this setting. Now set the minutes. Once this has been
confirmed, the time of day is saved in memory and the
display goes back to the entry menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Running your first programme
1
COTTONS UNI.
60°C PROG. SELECTION ...
40°C SETTINGS F...
40°C
2
3
4
MINIMUM IRON
DELICATES
WOOLLENS H
40°C 15:00
^ Press short cut button 1.
The main menu for Cottons Universal appears
COTTONS UNI.
60°C
1800 rpm
Duration: 1:06 h
Extras
Timer Y
Detergent
Back A
H
H
H
H
^ Press the flashing Start button.
^ Switch the washing machine off at the end of the
programme.
The load sensor must then be calibrated to zero as you
would with bathroom scales.
Calibrating the load sensor to zero
^ Switch the washing machine on.
^ Open the drum door.
^ Press short cut button 3 in until the display shows: Zero
setting OK
^ Switch the washing machine off.
The drum settles a little during the first few washes and will
take 3 or 4 wash cycles to reach its true position. For this
reason, please re-calibrate the sensor to zero after each of
the first few wash cycles.
The machine is now ready for use.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy
usage are determined by the size of
the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
To make the most out of your
machine load the maximum dry load
for the programme you are using.
– Reduce the amount of detergent for
smaller loads (use the Detergent
sub-menu).
– Use the Automatic and Quick wash
programmes for small loads.
Choosing the correct Extra options
(Soak, Pre-wash, Intensive)
– If smaller loads are washed using the
Cottons Hygiene and the Cottons
Universal programmes, the automat-
ic load recognition system will
reduce the amount of water, time and
energy used. This may mean that the
time left shown in the display is
adjusted during the course of the
wash programme.
Select:
a wash programme without any Extra
options for light to normal soiling
where there are no obvious marks.
a wash programme with the Extra
option Intensive for normal to heavily
soiled laundry with visible staining.
– Instead of using Cottons Hygiene
95°, use Cottons Universal 60° and
select the Extra option Intensive. This
will give an energy saving of
between 35% and 45%. The
programme duration will be longer.
This combination is sufficient for
most levels of soiling. For stubborn
or old stains, use the Extra option
Soak.
– Use the Extra option Soak instead of
Pre-wash. If Soak is followed immedi-
ately by a main wash the same suds
are used.
When drying with a tumble dryer
– Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
Brief instructions
^ Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
The headings numbered A, B, C, . . .
show the operating sequence and can
be used as brief instructions.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
ASort the laundry
– Curtains: Remove lead weights first
or place in a laundry bag.
– Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
^ Empty all pockets.
– Close any zips, fasten hooks and
eyes etc before washing.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
– Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
components in the machine.
^ Badly soiled areas, stains etc. should
be removed as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
Do not wash any items in this machine
which are specified by the
manufacturer as not washable on the
care label. (h symbol)
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturer's
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
,Do not use solvent-based
cleaning agents in this machine.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
BSwitch on the washing machine
The interior drum lighting will come on.
CSelect a programme
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this causes creases and reduces
cleaning efficiency.
You can select a programme either by:
Make sure that no garments are
caught between the drum door and
seal.
– using the appropriate short cut
button to select one of the four
frequently used programmes, or
– by going into the Prog. Selection
menu.
If required, you can then select any
Extra and/or Delay start from the
relevant sub-menu.
DLoad the drum
^ Press the a button to open the
drum door.
^ Unfold the laundry and load loosely
in the drum. Mixing both large and
small items gives better wash results
and also helps distribute the load
evenly during spinning.
^ Shut the door with a firm swing.
The load size and the detergent
indicators will appear.
The display shows the amount of
laundry loaded in the drum as a % (in
25% steps) of the maximum load
permissible for the programme
selected. Please refer to "Adding
detergent" for more information.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
EAdd detergent
The percentage amounts in the display
will help you to add the correct
percentage amount of detergent
recommended by the manufacturer.
40%
Add slightly less than half the
amount recommended . . .
50%
Add half the amount
recommended . . .
60%
Add slightly more than half the
amount recommended . . .
75%
Add three quarters of the
amount recommended . . .
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
100%
Add the full amount
i
You also need to take the level of
soiling and water hardness into
account.
Detergent for the pre-wash
(add 1/4 of the total amount
recommended). This compartment is
also used for starch formulations
when starching separately.
too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
j
Detergent for the main wash
including Soak
– Greasy particles clinging to the
laundry.
§
– Limescale deposits on the heater
elements.
Fabric conditioner or liquid starch.
^ Close the detergent drawer.
too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
See "Detergent" for further information
on detergent and the amount to
dispense.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
FStart the programme
^ Press the a button to open the
drum door.
^ Press the flashing Start button.
^ Remove the laundry.
The estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the washing machine
measures how much water is being
absorbed by the laundry. The program-
me duration may be longer or shorter
depending on this absorbency rate.
Only remove laundry from the
machine once the drum has
stopped turning. Reaching into a
moving drum is extremely
dangerous and could result in injury.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
discoloured themselves.
The drum lighting switches off once the
programme has started.
Once washing is in progress, you can
press one of the short cut buttons to
select or de-select additional options,
or call up other information as follows:
– Button 1 Extras: you can select or
de-select the Intensive and/or Rinse
hold Extra options up to 5 minutes
after the programme has started.
– Button 2 Timer m: you can call up
the current time of day and the
estimated end time of the
programme.
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
– Button 3 Save: to save the current
programme as a favourite.
^ Switch the washing machine off with
the s button.
– Button 4 Cancel: to cancel the
current programme. The suds are
pumped away immediately.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
GRemove the laundry
Anti-crease and Finish will flash
alternately in the display to indicate that
the programme has finished.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Favourite programmes
You can programme the short cut buttons to call up the four
wash programmes you use most frequently.
You can do this at the same time as starting a wash
programme.
Selecting/changing a favourite
^ Switch the machine on.
Entry menu
1
COTTONS UNI.
MINIMUM IRON
DELICATES
60°C PROG. SELECTION ...
40°C SETTINGS F ...
40°C
2
3
4
WOOLLENS H
40°C 15:00
^ Press short cut button 1.
Main menu
COTTONS UNI.
Duration: 1:06 h
60°C
1800 rpm
Extras
Timer Y
Detergent
Back A
H
H
H
H
^ Turn the multi-function selector to highlight the part you
want to change: Programme, Temperature or Spin speed
and confirm your selection by pressing the multi-function
selector.
Depending on the option highlighted selected, the following will be
displayed:
– Programme selection
PROGRAMME
SELECTION
Back A
COTTONS HYG.
COTTONS UNI.
MINIMUM IRON
H
Use the multi-function selector to select the programme you
want and confirm your selection. The main menu will
reappear.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Favourite programmes
Important:
If you do not make a selection in the sub-menu within approx.
20 seconds, the display will revert to the main menu.
– Temperature selection
COTTONS UNI.
60°C
1800 rpm
Temperature from
Cold - 60°C
a
^ Use the multi-function selector to select the temperature
you want and confirm your selection. The main menu will
reappear.
– Spin speed selection
COTTONS UNI.
60°C
1800 rpm
Spin speed from
0 - 1800 rpm
b
^ Use the multi-function selector to select the spin speed you
want and confirm your selection. The main menu will
reappear.
Selecting Extras
^ Press short cut button 1. This opens the Extras sub-menu.
COTTONS UNI.
60°C
1800 rpm
Extras
Intensive
Water plus
Pre-wash
Rinse hold
Soak
Back A
^ Use the multi-function selector to select the Extra you want
and confirm your selection. The main menu will reappear.
Repeat the process if you want to select another extra. See
"Extras" for more information.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Favourite programmes
Saving a favourite programme
All the settings you have selected are now shown in the main
menu.
COTTONS UNI.
Water plus
40°C
1800 rpm
Duration: 1:06 h
Extras
Timer Y
Detergent
Back A
H
H
H
H
^ Start the programme by pressing the Start button.
In a few seconds the option Save will appear in the display
above short cut button 3.
COTTONS UNI.
Water plus
40°C
1800 rpm
WASHING
1:06 h
Extras
Timer Y
Save
H
Cancel
H
H
H
^ Press short cut button 3.
Select a short cut button
COTTONS UNI.
Water plus
40°C
1800 rpm
Previous
Save to
:
:
COTTONS UNI.
60°C
1800 rpm
1
2
3
4
Back A
^ Use the multi-function selector to select the number you
want and confirm your selection. Your settings have now
been saved as favourite programmes and will appear in the
Entry menu.
If you do not want to run this programme immediately:
^ Press short cut button 4 = Cancel
Repeat the procedure if you want to customise additional
favourite programmes, and save them to short cut buttons
which have not yet been used.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Extras
You can use the Extras to augment the basic wash
programmes.
To open the Extras sub-menu
COTTONS UNI.
60°C
1800 rpm
Duration: 1:06 h
Extras
Timer Y
Detergent
Back A
H
H
H
H
^ Press short cut button 1.
Selecting Extras
COTTONS UNI.
60°C
1800 rpm
Extras
Intensive
Water plus
Pre-wash
Rinse hold
Soak
Back A
^ Use the multi-function selector to select the Extra you want
and confirm your selection.
– Repeat the process if you want to select another Extra.
– A tick will appear to show that an Extra has been selected.
Water plus
Intensive
The machine is set at the factory so that the water level in the
main wash and rinses will be increased if the Water plus Extra
is selected.
However, you can select other settings for Water plus. These
are described in "Settings".
For normal to heavy soiling or where staining is visible.
The duration of the main wash is increased.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Extras
Rinse hold
Soak
The laundry is not spun after the last rinse and remains
suspended in the final rinse water. This reduces creasing if
the laundry is not going to be removed from the drum imme-
diately after the end of the programme.
For heavily soiled and stained items with protein stains
(e.g. blood, fats and oils, cocoa).
A length of time of between 30 minutes and 6 hours can be
chosen, in 30 minute periods for the “Soak” process.
To select the soak time
COTTONS UNII.
60°C
1800 rpm
16:33
Finish:
15:00
Soak time:
0:30
h
^ Use the multi-function selector to select the soak time you
want and confirm your selection.
^ The soak time selected will be added to the running time of
the wash programme.
To delete the soak time
^ Set the soak time to 0:00 h and confirm your selection.
Pre-wash
For laundry with large amounts of dirt (e.g. dust, sand).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding detergent
The washing machine has a sensor which measures the
amount of laundry placed in the drum. The Detergent
sub-menu shows the percentage of the maximum load which
has been placed in the drum. The maximum load will depend
on the programme chosen.
In addition to the load size percentage, the amount of
detergent required is also displayed as a % figure.
To open the Detergent sub-menu
COTTONS UNI.
60°C
1800 rpm
Duration: 1:06 h
Extras
Timer Y
Detergent
Back A
H
H
H
H
^ Press short cut button 3.
COTTONS UNI.
60°C
1800 rpm
Load
75%
Detergent
75%
A
The load is shown in the display in 25% steps. Loads of less
than 25% or an empty drum are shown as <25%. If the
amount of laundry exceeds the maximum load, $100% will
flash in the display. Note: $100% will not appear in the display
if you have overloaded a Cottons Hygiene or Cottons
Universal programme.
To exit from the Detergent sub-menu
Press the multi-function selector to return to the main menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
You can use the timer to set the end time of a programme.
You can also delay the start of a programme from 30 minutes
up to a maximum of 24 hours, allowing you to make use of
night-time economy electricity rates, for example.
To open the Timer sub-menu
COTTONS UNI.
60°C
1800 rpm
Duration: 1:06 h
Extras
Timer Y
Detergent
Back A
H
H
H
H
^ Press short cut button 2.
To select a delay start time
You can enter the end time for a programme in 30 minute
stages.
COTTONS UNI.
60°C
1800 rpm
Start:
Finish:
15:03
15:30
15:03
^ Use the multi-function selector to select the programme
end time (when the first 30 minute stage is entered, the
programme end time will be adjusted to the next full or half
hour). Confirm your selection. The start of the programme
will now be delayed in parallel with the programme end
time you have selected.
To start the timer
^ Press the Start button.
The delay start time will be shown counting down in minutes.
To cancel the timer
^ Press short cut button 4.
The actual load size can only be determined accurately by
the machine once the programme has started. The
programme end time may, therefore, be a bit later or
earlier than first indicated.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
To omit the final spin (Rinse hold)
^ Select Rinse hold from the Extras
sub-menu. The laundry will not be
spun and will remain suspended in
the final rinse water. This reduces
creasing if the laundry is not going to
be removed from the drum immedi-
ately after the end of the programme.
Programm
Cottons Hygiene
Cottons Universal
Minimum Iron
Delicates
U/min
1800
1800
900
600
Automatic
Quick wash
Woollens
900
1600
1200
400
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start button.
Silks
Starch
1500
1200
1800
900
Separate rinse
Spin
Denim
– To end the programme:
Shirts
600
Press the a button. The water will
drain away. Press the door button a
again, to open the door.
Outer wear
800
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.
To omit rinse and interim spin and
the final spin
^ Select Without spin from the Extras
sub-menu. The laundry is not spun
after the final rinse. The water will
drain away and the machine will go
straight into the anti-crease stage. An
additional rinse is introduced if this
setting is selected with the Cottons
Hygiene, Cottons Universal, Minimum
Iron, Automatic and Quick wash
programmes.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons Hygiene and the Cottons
Universal programmes, an additional
rinse is introduced.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons Hygiene 70°C to 95°C
öF9
Fabric
Cottons and linen fabrics, e.g. bed linen, table linen, nappies,
underwear.
Notes
– Suitable for heavily soiled laundry.
– For heavy soiling or where staining is visible, select Intensive.
– For laundry with stubborn soiling and/or soiling which has been
left unwashed for some time, select Soak .
– For laundry with large amounts of dirt (e.g. dust, sand), select
Pre-wash.
Extras
Water plus, Intensive, Rinse hold, Soak or Pre-wash
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent.
Max. load
5.0 kg
Cottons Universal cold to 60°C
67E8
Fabric
Notes
Cottons or cotton mix fabrics, e.g. T-shirts, trousers.
– For heavy soiling or where staining is visible, select Intensive.
– For laundry with stubborn soiling and/or soiling which has been
left unwashed for some time, select Soak .
– For laundry with large amounts of dirt (e.g. dust, sand), select
Pre-wash.
– For dark coloured fabrics use a detergent for coloured fabrics,
or liquid detergent.
Extras
Water plus, Intensive, Rinse hold, Soak or Pre-wash
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent
Max. load
5.0 kg
Note for test institutes:
For testing in accordance with EN 60456 you must select the Intensive Extra
option.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Minimum iron cold to 60°C
67E81234
Fabric
For garments made of synthetic fibres, mixed fibres and for easy
care cotton shirts and blouses.
Notes
– For heavy soiling or where staining is visible, select Intensive.
Extras
Water plus, Intensive, Rinse hold, Soak or Pre-wash
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, detergent for delicates, tablet detergent and liquid tab
detergent.
Max. load
2.5 kg
Note for test institutes:
For testing in accordance with EN 60456 you must select the Intensive Extra
option.
Delicates cold to 60°C
1234
Fabric
For delicate garments made of synthetic fibres, mixed fibres and
easy care cotton shirts and blouses.
Curtains, including net curtains, specified machine-washable by
the manufacturer.
Notes
– For heavy soiling or where where staining is visible, select
Intensive.
– For curtains which crease easily, reduce the spin speed or
select Without spin.
Extras
Intensive, Rinse hold, Soak or Pre-wash
Liquid detergent for delicates.
1.0 kg
Detergent
Max. load
Automatic cold to 40°C
6712
Fabric
Mixed loads of garments suitable for the Cottons Universal and
Minimum iron programmes. Sort according to colour.
Notes
– For heavy soiling where staining is visible, select Intensive.
Water plus, Intensive, Rinse hold, Soak or Pre-wash
Powder detergent, detergent for coloured fabrics, liquid detergent
3.0 kg
Extras
Detergent
Max. load
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Quick wash cold to 40°C
67
Fabric
Small loads of lightly soiled laundry which can be washed in a
Cottons Universal programme.
Extras
Water plus, Rinse hold
Detergent
Max. load
Powder detergent, detergent for coloured fabrics, liquid detergent
2.5 kg
Woollens / cold to 40°C
ca
Fabric
Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature wash using the
cold setting.
Extras
Rinse hold
Detergent
Max. load
Liquid detergent for machine-washable woollens.
2.0 kg
Silks / cold to 30°C
c
Fabric
Hand-washable fabrics with no wool content, e.g. satin, lace and
silk.
Notes
– Place socks, tights, bras etc. in a washing bag.
Water plus, Rinse hold
Extras
Detergent
Max. load
Starch
Fabric
Liquid detergent for delicates.
2.0 kg
Table cloths, napkins, overalls, aprons.
Notes
– The laundry should be washed but not treated with fabric
conditioner.
Extras
Rinse hold
5.0 kg
Max. load
Separate rinse
Fabric
Articles which have been washed by hand and only need to be
rinsed and spun in the machine.
Extras
Rinse hold
5.0 kg
Max. load
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Spin
For spinning fabrics. Please make sure you select the appropriate spin speed.
Do not use for woollens.
Denim cold to 40°C
Fabric
Notes
Denim fabrics, e.g. jeans, skirts, shirts.
– Wash dark garments inside out.
– Denim often contains excess dye and will run during the first
few washes. Wash light and dark coloured items separately.
Extras
Rinse hold
Detergent
Detergent for coloured fabrics, liquid detergent, detergent for
delicates
Max. load
2.0 kg
Shirts cold to 60°C
Fabric
Notes
Shirts and blouses
– Pre-treat colours and cuffs if necessary.
– Wash silk blouses in the Silks programme.
Extras
Rinse hold
Detergent
Powder detergent, detergent for coloured fabrics, liquid
detergent, tablet detergent and liquid tab detergent
Max. load
1.5 kg
Outer wear cold to 40°C
Fabric
Outer wear made from micro-fibres such as Gore-Tex®,
SYMPATEX®, WINDSTOPPER® etc.
Notes
– Zip up jackets before washing.
– Do not use fabric conditioner.
Extras
Rinse hold
Detergent
Follow manufacturer's instructions regarding detergent on the
garment care label.
Max. load
2.0 kg
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Important - other care symbols
/
Hand wash (If no temperature
is specified use the lowest
temperature or cold)
h
Do not wash
apf Dry clean
D
y
Do not dry clean
Suitable for chlorine
bleaching
z
Do not use chlorine bleach
Tumble dry
q
r
s
At normal temperature
At low temperature
Do not tumble dry
Ironing
I
H
G
J
Hot iron
Medium hot iron
Cool iron
Do not iron
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
level
Wash
rhythm
Water
level
No of Rinse and Final spin
rinses
interim
spin
Cottons Hygiene
d
d
a
a
(
(
2-31)
2-31)
L2)
L2)
L
Cottons
Universal
Minimum iron
Delicates
Automatic
Quick wash
Woollens
Silks
d
e
d
d
(
(
–
a
b
a
a
c
d
–
e
e
e
(
(
(
d
e
(
(
e
2-33)
3
L2)
–
L2)
L2)
L2)
–
L
L
L
L
L
L
L
L
L
L
L
2
2
2
2
Starch
1
–
Separate rinse
Denim
–
–
2
–
(
(
(
a
a
b
3
–
Shirts
2
–
L4)
Outer wear
3
d = Low water level
( = Medium water level
e = High water level
a= Normal wash rhythm
b= Gentle action
c= Woollens
d= Silks
Please continue reading for further details about the programme sequences.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
This washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of Woollens, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
The door can be opened and laundry
removed at any time during the
anti-crease phase.
The programme sequences outlined
below are based on the basic
programme with a full load. Extras
which can be selected have not been
taken into account.
1)
A third rinse is carried out if:
– there is too much foam in the drum
The programme sequence display
shows the stage the programme has
reached.
– a spin speed lower than 700 rpm has
been selected.
– Without spin has been selected
2)
There is a spin after the main wash
and between the rinses.
3) A third rinse is carried out if:
Without spin has been selected
4)
In the Outdoor programme laundry is
only spun after the main wash.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
To cancel a programme
COTTONS UNI.
60°C
1800 rpm
WASHING
1:06 h
Extras
Timer Y
Save
H
Cancel
H
H
H
You can cancel a programme at any time after it has started
by pressing short cut button 4 Cancel.
The suds will be pumped away.
^ Open the drum door before starting a new programme.
To interrupt a programme
^ Switch the washing machine off with the s button.
To continue with the same programme:
^ Switch the washing machine back on again with the s
button.
To change a programme
COTTONS UNI.
60°C
1800 rpm
WASHING
1:06 h
Extras
Timer Y
Save
H
Cancel
H
H
H
– Once a programme has started, you can change the spin
speed up until the final spin begins.
– Up to 5 minutes after a programme has started:
you can change the temperature and also you can select
or deselect Intensive and/or Rinse hold by using short cut
button 1 to bring up the Extras sub-menu.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry after a programme has started
Laundry can be added or removed after the programme has
started when using the following programmes:
– Cottons Hygiene
– Cottons Universal
– Minimum iron
– Quick wash
– Automatic
– Starch
^ Press the door button a to open the door.
^ Add or remove items.
^ Close the drum door.
The programme will continue automatically.
Please note:
Once a programme has started the machine cannot recog-
nise any adjustment to the load.
For this reason, if laundry is added or removed after the start
of a programme, the machine will always complete the
programme cycle for a full load.
This can alter the programme running time shown in the
display.
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the Spin stage.
– the electronic programme lock has been activated.
If you press the a button when the above conditions are
present, $ System locked! will light up in the display.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic programme locking
Programme locking prevents the machine from being
opened and/or the programme being cancelled during a
wash programme.
To activate programme locking
^ Once the programme has started, press the Start button for
at least 6 seconds until the following appears in the
display:
X
System locked!
The machine will now not accept any changes and the
programme will proceed through to the end.
Programme locking is deactivated automatically at the end of
the programme.
To deactivate programme locking
^ Press the Start button for at least 6 seconds until the
following appears in the display:
W
Ready!
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
All modern detergents produced for
automatic washing machines are
suitable, including liquid, compact
(concentrated), tablets, liquid tablets
and special application detergents.
Use dispensing aids, e.g. balls, if these
are supplied with the detergent. Tablets
are suitable for full loads but note that it
may be impractical to reduce tablets for
smaller loads. Some tablets do not
dissolve as rapidly as others and may
not be suitable for Quick wash
The right amount to dispense will
depend on the following:
– The quantity of laundry (follow the
machine’s dispensing
recommendation and reduce the
amount of detergent with smaller
loads as indicated on the display)
– The soiling level of the laundry.
Lightly soiled No visible dirt or stains.
Possibly slight body odour.
Normally soiled Visibly dirty and/or
just a few slight stains.
programmes.
Heavily soiled Stains and soiling
clearly visible.
Silks, woollens and knitwear containing
wool mixtures and hand-washable
garments should be washed using a
liquid detergent specifically designed
for washing woollens. Do not use
biological detergents on silk as the
enzymes may damage the silk!
– The water hardness level. Check with
your local water supplier if you do not
know the water hardness level in
your area.
Water softeners
A water softener can be used to cut
down on the use of detergents in
extremely hard water areas. Dispense
according to the amount specified on
the packaging. First add detergent and
then the water softener. Use a quantity
of detergent as for soft water. Miele do
not recommend connecting the
Instructions for use and recommended
amounts for a full load are given on the
detergent packaging.
Liquid detergent should be dispensed
using a ball provided by the
manufacturer for programmes without a
pre-wash.
For programmes with a pre-wash you
will need to purchase a special
machine to a household water softener.
container from the Miele Spare Parts
department which sits in the main wash
compartment j of the detergent
dispenser drawer. Add liquid detergent
to this container for the main wash and
to compartment i for the pre-wash.
Washing with several
components
If you wash using several components
(e.g. special application detergents),
dispense them into compartment j in
the following order:
1. Detergent
2. Water softener
3. Stain remover
This way the agents are distributed
more efficiently.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Fabric conditioners and liquid
starch
If starching frequently, clean the dis-
penser compartment and especially
the siphon tube and conditioner
channel regularly. See "Cleaning the
detergent dispenser drawer". Do not
add starch formulations or viscous
liquid starch to the § compartment
as it will clog it up. See "Adding
starch separately".
Fabric conditioners make garments soft
and fluffy to handle and help prevent
static cling when tumble drying.
Starch stiffens and gives body to items
of laundry, e.g. shirts, tablecloths and
bed linen.
^ Dispense according to the amount
specified on the packaging.
Adding fabric conditioner separately
^ Add fabric conditioner to
compartment §.
Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme
^ Select the Starch programme.
^ Press the Start button.
Adding starch separately
^ Prepare the starch solution in
accordance with manufacturer's
instructions on the packaging.
^ Add the starch formulation to
compartment i.
^ Select the Starch programme.
^ Press the Start button.
Colour run and dye removers /
dyes
^ Add the fabric conditioner or liquid
starch to compartment §. Do not
exceed the maximum level mark.
^ Do not use colour run or dye
removers in this washing machine.
The conditioner or liquid starch is
automatically dispensed in the last
rinse. At the end of the programme a
small amount of water remains in the
fabric conditioner compartment §.
^ Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Always observe the
manufacturer's instructions carefully.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Extra cleaning
,Disconnect the machine from the
mains electricity supply and
withdraw the plug from the socket
prior to cleaning the machine.
Carry out a hot wash (70°C or above)
with powder detergent approx. every 6
weeks to help prevent deposits building
up in the machine. These can occur
when washing is mainly done at low
temperatures, and also lead to
unpleasant smells. If you have no
reason to wash occasionally at this high
temperature, then run a Cottons 95°C
programme with detergent but no
laundry at regular intervals.
^ Clean the casing with a mild
non-abrasive detergent or soap and
water. Wipe dry with a soft cloth.
^ Clean the fascia panel with a damp
cloth and wipe dry with a soft cloth.
^ The drum can be cleaned using a
suitable proprietary stainless-steel
cleaning agent following the
manufacturer's instructions on the
packaging.
,Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaning agents. These
might damage plastic surfaces and
other components because of the
chemicals they contain.
The washing machine must not be
hosed down.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals. It can be washed 300 times.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the detergent dispenser
drawer
Remove detergent residues regularly.
^ Clean the siphon.
1. Remove the siphon from
compartment §. Wash under
running warm water. Clean the
siphon tube in the same way.
^ Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release catch and at the
same time pull the drawer right out of
the machine.
2. Replace the siphon.
Over time, detergent residue can build
up in the water jets in the top of the
detergent drawer housing.
^ Clean the detergent drawer with
warm water.
^ Before replacing the detergent
drawer, use a bottle brush or similar
to clean them out.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the filter in the water
inlet
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
The washing machine has a filter to
protect the water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ Remove the rubber seal 1 from the
recess.
^ Using pointed pliers, take hold of the
plastic filter bar 2 and remove.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
What to do, if . . .
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
The display remains There is no power to the
dark. machine.
Possible cause
Remedy
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
The display shows: The electronic system lock Enter the code for the
Machine locked
Enter lock code.
has been activated.
system lock and confirm the
entry. Deactivate the system
lock if you do not wish this
message to appear the
display the next time the
machine is switched on.
There is a fault
message in the
display.
A programme cannot be
started while there is a
fault message in the
display.
– Note what is shown in the
display.
– Switch the washing
machine off and then
back on again with the s
button. The fault message
will be deleted.
The display is dark
and the Start button off automatically to save
is flashing slowly.
The display has switched Press one of the short cut
buttons. Stand-by comes to
energy (Stand-by mode). an end.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problems with the load size indicator
Problem
The display
indicates a load of
Possible cause
Remedy
There was already
laundry in the drum
^ To recalibrate the sensor to the
zero setting:
< 25% even though when the washing
– Remove the laundry from the
drum and leave the door
open.
– Switch off the washing
machine.
– Switch on the washing
the drum is full.
machine was switched
on. This has
decalibrated the
sensor from the zero
setting.
machine.
– Press short cut button 3 in
until the display shows:
Zero setting OK.
The display
The load size sensor
If the display continues to
indicates a load
has been decalibrated indicate a load greater than
greater than < 25%, from the zero position. < 25%, recalibrate the sensor to
even though the
drum is empty.
zero (see above section).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems
Problem
Possible cause
The machine feet are not Level the machine (see
level. "Installation").
Remedy
The machine shakes
during the spin cycle.
The pump makes
strange noises.
This is not a fault! These noises occur at the end of
a pump sequence as a normal part of the operation.
Large amounts of
The water pressure is too – Clean the filter in the
detergent residue remain low.
in the detergent
dispenser drawer.
water inlet.
– It may be useful to
select the Water plus
Extra.
Powder detergent used in In future, add washing
conjunction with water
softeners tends to
become sticky.
powder into the
dispenser drawer first,
and then add the water
softener.
Fabric conditioner is not The siphon tube is not
Clean the siphon, (see
completely dispensed or correctly positioned, or is “Cleaning and care" -
too much water remains clogged up.
in the § compartment.
"Cleaning the detergent
dispenser drawer”).
The display is in a
different language.
A different language has Set the language you
been selected in
want. The flag symbol
will guide you.
Settings J Language J.
The laundry has not
been spun satisfactorily. was too low.
The spin speed selected Select a higher spin
speed next time.
When laundry is dry it
feels hard to the touch.
Too vigrous wash action. Programme in gentle
action and more water.
Not enough detergent
used.
Increase detergent dose
to prevent limescale
build up in laundry.
No fabric conditioner
used.
Use fabric conditioner in
last rinse.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Possible cause
Remedy
Liquid detergent Liquid detergents
– Use a general purpose detergent
does not give the usually contain no
containing a bleaching agent.
required result.
bleaching agents.
They do not remove
fruit, coffee and tea
stains.
– Pour stain removers into
compartment j of the dispenser
drawer and liquid detergent into a
dispenser ball.
– Never put stain removers and
liquid detergent together in the
dispenser drawer.
Grey, greasy
Insufficient amounts of – Use more detergent.
particles cling to detergent were used
washed laundry. to break down the
particles of grease in
– Before washing the next load run
a Cottons 95°C programme with
powder detergent but without a
load.
heavily soiled laundry.
A stale smell is
in the drum and washing.
on laundry.
Low temperature
Before washing the next load run a
Cottons 95°C programme with
powder detergent but without a
load.
White residues
which look like
powder
detergent are
seen on dark
textiles after
washing.
The detergent
– Try and brush off the residues
with a soft brush once the laundry
is dry.
– Wash dark textiles using a
detergent which contains no
zeolites. Liquid detergents
usually contain no zeolites.
contained compounds
(zeolites) to aid water
softening which are
not soluble in water.
They have ended up
on the laundry.
Clothes are
coming out
creased.
Programme was
overloaded.
– Reduce quantity of clothes in
drum.
The wrong programme – Check care labels and the
was used.
programme chart.
– Use easy iron conditioners.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The drum door cannot be opened by pressing the a button
Possible cause
Remedy
The machine is not
connected to the
Insert the plug in the socket and switch on and / or
switch the machine on with the s button.
electricity supply and / or
is not switched on.
The electronic
Deactivate programme locking as described in
programme lock has been "Electronic programme locking".
activated.
The electronic system
lock has been activated.
Deactivate the system lock as described in the
Settings J menu.
Power cut
Open the drum door as described in the next
section.
The door was not
correctly engaged.
Press hard against the lock side of the drum door
and then press the a button.
There is still water in the Clean the drain filter and drain pump as described
drum and the machine is in the next section.
unable to drain.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the drum door in the
event of a blocked drain outlet
and/or power failure
Blocked drain outlet
If the drain outlet is blocked, up to
25 litres of water will be retained in the
machine.
^ Switch the washing machine off.
There is a lever behind the detergent
drawer fascia panel.
,Caution: if laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
Procedure for draining the machine
^ Place a suitable container under the
access flap.
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
^ Remove the lever.
^ Unscrew the drain filter lid until water
runs out.
To interrupt the flow of water:
^ Tighten the drain filter back up again.
^ Use it to open the access flap.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Once the flow of water ceases:
,Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
Opening the drum door
,Always make sure that the drum
is stationary before reaching into the
machine to remove laundry.
Reaching into a moving drum is
extremely dangerous.
^ Remove the drain filter completely.
^ Clean it thoroughly.
^ Pull the emergency release
downwards (see illustration). The
drum door will open.
^ Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Any foreign object causing an
obstruction should be removed.
^ Put the drain filter back in place and
secure.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Changing the lamp for the
drum lighting
The washing machine will still
operate with no lamp in place or if the
lighting is faulty.
^ Remove the yellow lever from behind
the detergent drawer facia panel as
described previously.
^ Press the two prongs to separate the
plastic holder 1 from the protective
cover 2.
^ Switch the washing machine on and
open the drum door.
^ Now disconnect the washing
machine from the electricity supply,
see "Warning and Safety
instructions".
^ Remove the faulty lamp from the
plastic holder.
The new lamp must be of the same
type (G4) with a maximum power
output of 5 watts/12 volts.
The lamps are available from an
electrical retailer, your Miele Dealer or
from the Miele Spare Parts Department.
^ Insert the new lamp into the plastic
holder.
^ Carefully fit the plastic holder and the
protective cover together.
^ Insert the lighting unit back into the
socket and turn it clockwise to secure
it.
^ Insert the lever into the slot in the
drum lighting unit (see illustration)
and turn anti-clockwise (a quarter
turn) until you feel a resistance.
It is absolutely essential for the
correct functioning of the washing
machine that the drum lighting unit
is fitted correctly in position.
^ Pull out the loosened unit with your
fingers.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, please
contact:
Future updates (PC)
The indicator or check light marked PC
is the interface used by Miele service
technicians during servicing work for
testing purposes and for updating the
machine's programme data.
– your Miele dealer or
– the Miele Service Department (see
back cover for contact details).
When contacting your Dealer or the
Service Department, please quote the
model and serial number of your
appliance, both of which are shown on
the data plate visible above the
Appliance guarantee
Please see the guarantee card
supplied with your machine.
Optional accessories
porthole glass when the door is open.
Optional accessories for this washing
machine are available from your Miele
Dealer or from the Miele Spare Parts
Department.
Please note that telephone calls may
be monitored and recorded to
improve our service.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
aInlet hose with "Waterproof" system
hDetergent dispenser drawer
bElectricity supply cable
iDrum door
c - f Flexible drain hose (with
jAccess to drain filter, drain pump
detachable swivel elbow)
and emergency release
gFacia panel with controls
kHandle recesses for moving the
machine
lFour height adjustable feet
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
aProtruding edge for holding when
eTransit bar covers
fRestraining clip for:
– Inlet hose
moving the machine
bElectricity supply cable
cInlet hose with "Waterproof" system
dDrainage hose
– Drain hose
– Electricity supply cable
– Transit bars when removed
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Installing the washing machine
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
To manoeuvre the machine out of its
packing case to its installation site hold
it by the edge of the lid where it
protrudes to the rear of the washing
machine as well as by the handle
recesses at the front.
Please note the following points:
Please note:
^ The machine must be level and
securely positioned.
^ Do not lift the machine by the drum
door.
^ To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
,Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
If installing on a wooden joist floor:
^ We recommend a plywood base
(at least 59x52x3 cm). The base
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for the presence
of pipes and cables.
Removing the transit fittings
If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
,If the machine is installed on a
raised plinth, it has to be secured
against slippage during spinning
using retaining clips (available from
the Miele Spare Parts Dept).
^ To remove the left and right covers
1. Use a screwdriver to prise out the
cover as illustrated.
2. Pull the cover forwards to remove.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
^ Using the spanner supplied turn the
left-hand transit bar 90°, then
^ Turn the right-hand transit bar 90°,
then
^ withdraw the transit bar.
^ withdraw the transit bar.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
,The washing machine must not
be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
^ Using the spanner supplied turn
counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
^ Use a spirit level to check the
machine is standing level.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
False values may also show in the Load
and Detergent display.
Screwing out and adjusting the feet
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
This washing machine is not suitable
for building under a worktop.
Washer and Dryer stack
A Miele tumble dryer can be stacked
with the washing machine. A stacking
kit* is necessary and can be purchased
from the Miele Spare Parts
Department.
Please note:
a Safety distance to wall:
at least 2 cm
b Height: Stacking kit with
pull-out shelf: approx. 172 cm
stacking kit without
pull-out shelf: approx. 170 cm
c Depth of the washer-dryer stack:
approx. 63 cm
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The Miele Waterproof system
2) Electronic unit and washing
machine housing
The Miele Waterproof system protects
the washing machine from water
damage.
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water from
flowing into the machine and water in
the suds container is pumped away.
The system consists of three main
components:
1) the inlet hose
2) the electronic unit and the washing
machine housing
– Overflow protection
3) the drain hose
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
1) Inlet hose
– The inlet hose is fitted with an
additional electrical safety valve
which works like an automatic
stopcock and is housed in the inlet
hose connection box.
3) Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
– It is pressure tested to between
7,000 and 10,000 kPa.
– The inlet hose has a protective
sleeve.
Any leaking water from the inlet hose
is fed into the sump through this
protective sleeve. A float switches off
the safety valve, preventing any more
water from flowing into the machine
and water in the suds container is
pumped away.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the water supply The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
washing machine has been designed
to comply with DIN regulations.
,The plastic casing of the safety
valve contains electrical
components. The Waterproof system
must only be connected to its own
stopcock. It must not be connected
to mixer taps or similar and must not
be fitted in areas where there is the
risk of water or other liquids
reaching it.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than
1,000 kPa it is essential to fit a reducer
valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" thread. The stopcock should
be fitted by a qualified plumber.
,The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
Do not get wet.
The washing machine is not suitable
for connection to a hot water supply
and connection to a household
water softener is not recommended.
The protective sleeve of the hose
must not be damaged or kinked.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Maintenance and care
If you intend to unscrew the Miele
Waterproof system hose from the
stopcock it is essential to disconnect
the machine from the electricity supply
first.
Only use a Miele Waterproof system
hose should you need a replacement.
In order to protect the water inlet
valve, the dirt filter in the water inlet
valve connection must not be
removed.
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
This hose is tested to withstand
pressures of up to 14,000 kPa and can
be used as a flexible extension to the
water supply.
N.B. Using this hose renders the
Waterproof system safety valve on the
inlet hose ineffective.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the drainage
system
Drain hose connection:
1. Direct into a sink or basin:
Please note the following
The machine drains via a drain pump
with a delivery head of 1 metre*.
– Hook the hose over the edge and
secure.
The drain hose must not be kinked as
this restricts drainage. The swivel elbow
at the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can be purchased
from the Miele Spare Parts Department
or your Miele dealer.
2. Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
* For a delivery head of more than 1 m
(up to a maximum of 1.8 m) a second
duo-drain pump is available with the
corresponding kit from the Miele Spare
Parts Department or your Miele Dealer.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
national and local safety regulations.
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. The voltage and connected
load are given on the data plate.
Please ensure these match the
household mains supply. The fuse
rating is quoted on the plug.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100 Section
739).
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Energy
Water
Duration
in kWh
in litres
Normal
Intensive
Cottons Hygiene
95°C
5.0 kg
1.70
42
1 h 51 mins
2 h 06 mins
Cottons Universal
1)
60°C
60°C
40°C
40°C
5.0 kg
0.85
0.85
0.49
0.49
42
42
42
42
–
1 h 59 mins
1 h 59 mins
1 h 59 mins
1 h 59 mins
5.0 kg
5.0 kg
5.0 kg
1 h 30 mins
–
1)
1 h 30 mins
Minimum iron
1)
40°C
2.5 kg
2.5 kg
0.44
0.44
49
49
–
1 h 19 mins
1 h 19 mins
40°C
1 h 04 min
Delicates
30°C
1.0 kg
1.0 kg
2.0 kg
3.0 kg
2.5 kg
2.0 kg
1.5 kg
2.0 kg
0.33
0.24
65
39
49 mins
36 mins
59 mins
Silks /
30°C
–
Woollens /
30°C
0.22
35
39 mins
–
Automatic
40°C
0.30 - 0.60
0.30
30 - 50
30
59 mins
1 h 14 mins
Quick wash
40°C
30 mins
–
–
–
–
Denim
40°C
0.50
45
1 h 00 min
1 h 12 mins
1 h 03 mins
Shirts
60°C
0.90
55
Outer wear
40°C
0.43
57
1)EN 60456 test programme
Note for test institutes:
For testing in accordance with EN 60456 you must select the Intensive Extra.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any Extras selected.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
85.0 cm
Width
59.5 cm
Depth
58.0 cm
Depth with door open
Weight
97.5 cm
94 kg
Maximum floor load
Capacity
1600 Newton (approx. 160 kg)
5 kg dry laundry
see data plate
see data plate
see data plate
see "Consumption data"
100 kPa (1 bar)
1000 kPa (10 bar)
1.60 m
Voltage
Rated load
Fuse rating
Consumption data
Water flow pressure minimum
Water flow pressure maximum
Inlet hose length
Drain hose length
Connection cable length
Drain pump head max.
Drain pump length max.
Lamp for drum lighting
Test certificates awarded
1.50 m
1.60 m
1.00 m
5.00 m
Type G4 (5 Watt/12 Volt)
Radio / TV suppression, VDE
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
for changing standard settings
The Settings menu is used to alter the washing machine's electronics to suit
changing requirements.
Settings can be altered at any time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
To open the Settings menu
1
COTTONS UNI.
MINIMUM IRON
DELICATES
60°C PROG. SELECTION ...
40°C SETTINGS F ...
40°C
2
3
4
WOOLLENS H
40°C 15:00
^ Select Settings J from the entry menu and confirm your
selection with the multi-function selector.
Select Settings
SETTINGS
Back A
LANGUAGE F ...
TIME OF DAY ...
WATER PLUS ...
H
^ Select the setting you want to change and confirm your
selection.
If you do not make a selection in the sub-menu within approx.
20 seconds, the menu display will revert to the Settings
menu.
Language J
The display shows several different languages.
You can select one of the languages displayed via the
Languages J sub-menu.
The flag after the word Languages acts as a guide to prevent
a language which will not be understood from being set.
A tick will appear beside the language to show that it has
been set.
SETTINGS
Back A
èeština
dansk
LANGUAGE F
deutsch
H
^ Select the language you want and confirm your selection.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Time of day
First select either a 24 hour or 12 hour clock. Then set the
current time of day.
To select a 24 hour or 12 hour clock.
SETTINGS
Back A
TIME OF DAY
24 h clock..
12 h clock...
^ Select the clock option you want and confirm your
selection.
The display will then switch to the time of day setting.
To set the time of day
12:00
Set time of day.
^ Use the multi-function selector to select the hour and
confirm your selection. Now set the minutes. Confirm the
selection again to save the time of day in memory.
The time of day can be changed at any time later on by:
1
COTTONS UNI.
MINIMUM IRON
DELICATES
60°C PROG. SELECTION ...
40°C SETTINGS F...
40°C
2
3
4
WOOLLENS H
40°C 15:00
^ Highlighting the time of day in the Settings menu and
confirming your selection.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Water plus
This setting is used to select the water intake setting for the
Water plus Extra option.
There are three different options:
Water +
The water intake is increased in the wash and rinse stages of
the programmes (the washing machine is delivered with this
setting programmed as standard).
Additional rinse
An additional rinse is introduced in the Cottons Hygiene,
Cottons Universal, Minimum iron, Automatic, Quick wash and
Silks programmes.
Water + and Additional rinse
^ The water intake is increased in the wash and rinse stages
and an additional rinse is also introduced in the Cottons
Hygiene, Cottons Universal, Minimum iron, Automatic,
Quick wash and Silks programmes.
A tick will appear beside the option to show that it has been
set.
SETTINGS
Back A
WATER PLUS
Water+ B
Additional rinse
Water+ and add. rinse
^ Select the option you want and confirm your selection.
Gentle action
Activating gentle action reduces the drum action and is
suitable for washing slightly soiled items more gently.
Gentle action can be activated for the Cottons Hygiene,
Cottons Universal and the Minimum iron programmes.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
^ The washing machine is delivered with the Gentle action
setting deactivated.
A tick will appear beside the option to show that it has been
set.
SETTINGS
Back A
Off B
On
GENTLE ACTION
^ Select the option you want and confirm your selection.
Suds cooling
When this is activated, additional water flows into the drum
at the end of the main wash to cool the suds down. Hot
suds can damage plastic drainage pipes.
Suds cooling takes place when the Cottons Hygiene
programme is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if the drain hose is
hooked over the edge of a sink or basin.
– where the drainage pipes do not comply with DIN 1986.
The washing machine is delivered with Suds cooling
deactivated.
A tick will appear beside the option to show that it has been
set.
SETTINGS
Back A
Off B
On
SUDS COOLING
Select the option you want and confirm your selection.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Lock
The system lock prevents your machine being used without
your knowledge.
When the system lock has been activated, you have to enter
a code after switching the washing machine on. Otherwise
the washing machine cannot be operated.
To activate the lock
SETTINGS
LOCK
Back A
Activate ...
^ Select activate and confirm your selection.
To enter the lock code
The display will now request that a code is entered. The code
is 125 and cannot be altered.
0
_ _
Enter lock code.
^ Turn the multi-function selector until the number 1 appears.
Confirm your selection of this number. Now set the second
number.
Repeat the process until all three numbers have been
entered.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
After the last number has been entered, you must confirm the
code with OK.
1 2 5
Confirm lock code.
OK
H
Back A
H
^ Confirm lock code by pressing short cut button 1.
X
Entry OK.
Lock active when machine is switched off.
^ Switch the washing machine off.
To unlock the washing machine
When the washing machine is switched on again, the display
will request the lock code.
^ Enter lock code 125 as described above and confirm the
entry.
To deactivate the lock
Proceed as for activating the lock.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Temperature
You can chose for the temperature to be displayed as
°C/Celsius or °F/Fahrenheit.
A tick will appear beside the option to show that it has been
set.
SETTINGS
Back A
TEMPERATURE
°C / Celsius B
°F / Fahrenheit
^ Select the option you want and confirm your selection.
Buzzer
When the buzzer function has been activated, an audible
tone sounds at the end of a programme or when Rinse hold
is reached.
There are three different options:
Off
= the buzzer is switched off but sounds at
maximum volume if there is a fault (the washing
machine is delivered with this option set as
standard).
Normal = the buzzer sounds at the end of a programme or
when Rinse hold is reached.
Loud
= the buzzer sounds louder at the end of a
programme or when Rinse hold is reached.
A tick will appear beside the option to show that it has been
set.
SETTINGS
BUZZER
Back A
Off
Normal B
loud
^ Select the option you want and confirm your selection.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Keypad tones
An audible tone sounds when the Start button, a short cut
button or the multi-function selector is pressed.
The washing machine is delivered with the keypad tone
switched off.
A tick will appear beside the option to show that it has been
set.
SETTINGS
Back A
Off B
On
KEYPAD TONES
^ Select the option you want and confirm your selection.
Display contrast
There are ten different display contrast settings.
The machine is delivered with the display contrast on
Setting 5.
The display contrast will change as soon as a different setting
is chosen.
g
Set display contrast.
^ Set the display contrast you require.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Stand-by
To save energy, the display goes out after 10 minutes and
the Start button flashes slowly.
There are two options:
On
Stand-by comes on:
– if a programme is not selected after the machine has been
switched on.
– after a programme has started.
– at the end of a programme.
Not in current Prog. (the machine is delivered with this option
selected)
Stand-by comes on:
– if a programme is not selected after the machine has been
switched on.
Operating the multi-function selector or one of the short cut
buttons switches the display back on again.
A tick will appear beside the option to show that it has been
set.
SETTINGS
STAND-BY
Back A
On
Not in current prog.
B
^ Select the option you want and confirm your selection.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Memory
If an Extra has been selected for a programme, or the
recommended temperature or spin speed has been
altered, the machine will store the changes in memory at
the start of a programme.
The next time this programme is selected these settings will
appear in the Programme selection menu.
The memory function is not active when favourite
programmes are selected using the short cut buttons.
The machine is delivered with the memory function
deactivated.
A tick will appear beside the option to show that it has been
set.
SETTINGS
MEMORY
Back A
Off B
On
^ Select the option you want and confirm your selection.
Miele{home
The Miele|home setting is not activated on this machine. It is
not possible to retro-fit it for Miele|home either.
To close the Settings menu
SETTINGS
Back A
LANGUAGE F...
TIME OF DAY ...
WATER PLUS ...
H
Select Back and confirm your selection. The display will
return to the entry menu.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/1405/W 2888
M.-Nr. 06 559 470 / 00
en - GB
Download from Www.Somanuals.com. All Manuals Search And Download.
|