Operating instructions
for Washing machine
W 5740
en - GB
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 483 960
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Extra quiet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 27
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Automatic dispensing of fabric conditioner or liquid starch to laundry
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Colour run and dye removers / dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
External casing and fascia panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cleaning the detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cleaning the water inlet filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The drum door does not open when you press the Door button. . . . . . . . . . . . . . 39
Opening the drum door in the event of a blocked drain outlet
and/or power failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Optional spare parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Transporting the washing machine to its installation site . . . . . . . . . . . . . . . . . 45
Removing the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 49
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
The Miele water protection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Notes for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
To access programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
To select a programmable function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
To alter a programmable function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
To come out of programmable functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Language ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CareCollection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This washing machine is not
~
intended for use by persons (including
This washing machine conforms to
current safety requirements.
Inappropriate use can, however,
lead to personal injury and damage
to property.
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they are supervised whilst using it or
have been shown how to use it by a
person responsible for their safety.
To avoid the risk of accidents and
damage to the washing machine,
please read these instructions
carefully before using it for the first
time. They contain important
Safety with children
Keep children away from the
~
washing machine at all times. It is not a
toy! To avoid the risk of injury do not
allow children to play on or near it or to
play with its controls. Supervise
information on its installation, safety,
use and maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
children whilst you are using it.
Older children may only use the
~
washing machine if its operation has
been clearly explained to them and
they are able to use it safely,
Correct application
recognising the dangers of misuse.
This washing machine is for
~
For machines with a 'porthole' door,
domestic use only and can only be
used to wash items which are specified
by the manufacturer to be
~
remember that the porthole glass will
be hot when washing at very high
temperatures.
machine-washable on the wash care
label, and textiles composed of
hand-washable wool or wool blend
fabrics as well as satin, lace, silk and
other hand-washable garments.
Any other applications may be
Do not let children touch it.
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Unauthorised repairs could result in
~
unforeseen dangers for the user, for
which Miele cannot accept liability.
Repairs should only be undertaken by a
Miele approved service technician.
Ensure current is not supplied to the
machine until after maintenance or
repair work has been carried out.
Before setting up the washing
~
machine, check it for any externally
visible damage.
Do not install or use a damaged
washing machine.
Before connecting the washing
~
machine, ensure that the connection
data on the data plate (voltage and
connected load) match the mains
electricity supply. If in any doubt,
consult a qualified electrician.
If the connection cable is faulty it
~
must only be replaced by a Miele
approved service technician to protect
the user from danger.
In the event of a fault or for cleaning
~
The electrical safety of this washing
~
purposes, the washing machine is only
completely isolated from the electricity
supply when:
machine can only be guaranteed when
continuity is complete between it and
an effective earthing system which
complies with current local and national – it is switched off at the wall socket
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and
and the plug is withdrawn, or
– it is switched off at the mains, or
where there is any doubt the household – the mains fuse is withdrawn, or the
wiring system should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
screw-out fuse is removed (in
countries where this is applicable).
This washing machine must only be
~
consequences of an inadequate
earthing system (e.g. electric shock).
connected to the on-site water supply
using a new hose kit. Old hoses must
not be re-used.
Do not connect the washing
~
machine to the mains electricity supply
by an extension lead. Extension leads
do not guarantee the required safety of
the appliance (e.g. danger of
overheating).
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
machine and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This washing machine may only be
Turn off the stopcock if the machine
~
is to be left for any length of time (e.g.
~
used in mobile installations such as
ships if a risk assessment of the
installation has been carried out by a
suitably qualified engineer.
holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
Flooding danger.
~
Do not make any alterations to the
~
washing machine, unless authorised to
If hooking the drain hose into a wash
basin, check that the water can drain
off quickly enough to prevent the sink
from overflowing. Make sure the drain
hose is secure, so that the force of the
water flowing out of the hose does not
dislodge it.
do so by Miele.
Correct use
Do not install your washing machine
~
in rooms where temperatures below
freezing may occur. Frozen hoses may
burst or split. The reliability of the
Take care to ensure that foreign
~
objects (e.g. nails, pins, coins, paper
clips) do not find their way into the
machine with the laundry. These may
damage components of the machine
(e.g. suds container, drum), which in
turn can result in damage to the
laundry.
electronic control unit may be impaired
at temperatures below freezing point.
Before using the washing machine
~
for the first time, check that the transit
bars at the rear of the machine have
been removed (see section on
"Installation and connection"). During
spinning, a transit bar which is still in
place may result in damage to both the
machine and adjacent furniture or
appliances.
If the correct amount of detergent is
~
dispensed, the machine should not
need to be descaled. If, however, you
do wish to descale the machine only
use proprietary non-corrosive descaling
agents and strictly observe the
instructions on the packaging. A
special descaling agent is available to
order from the Miele Spare Parts
Department or via the internet on
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Textiles which have been
Only remove laundry from the
~
~
pre-treated in solvent based cleaning
agents must be thoroughly rinsed in
clean water before being washed in the moving drum is extremely dangerous
washing machine once the drum has
stopped turning. Reaching into a
machine.
and could result in injury.
Never use solvent based cleaning
~
agents, e.g. those containing benzene,
Accessories
in this machine, as this may result in
damage to component parts and create
toxic fumes. Such agents also pose a
fire and explosion hazard.
Accessory parts may only be fitted
~
when expressly approved by Miele. If
other parts are used, guarantee,
performance and product liability
claims will be invalidated.
Never use solvent based cleaning
~
agents, e.g. those containing benzene,
to clean the outside surfaces of this
machine. They can cause damage to
plastic surfaces.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and Safety
instructions.
Only use dyes specified by the
~
manufacturer as being suitable for use
in a domestic washing machine. Always
observe the manufacturer's instructions
carefully.
Colour run and dye removers
~
contain sulphur compounds which can
cause damage such as corrosion. Do
not use these products in this machine.
If liquid detergent comes into
~
contact with the eyes, rinse them
thoroughly with lukewarm water imme-
diately. If swallowed, seek medical
assistance immediately and retain the
packaging or label for reference. Those
with skin problems or sensitive skin
should avoid their skin coming into
contact with liquid detergent.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Control panel
aExtra option buttons
Various extra options can be added
to the washing programmes.
fStart/Stop button
For starting the programme selected
and cancelling a programme once it
has started.
bDisplay
See the following page for more
information.
gProgramme selector
For selecting a programme. The
indicator light next to the selected
programme will come on. The
programme selector can be turned
clockwise or anti-clockwise.
cTemperature button
For selecting a temperature.
dSpin speed button
For selecting the final spin speed or
Rinse hold (e) or deselecting the
spin (No u).
hjk button
For switching the machine on or off.
iDoor button
Opens the machine door.
ePC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Programme duration
After the start of a programme, the
estimated programme duration will
appear in the display in hours and
minutes.
During the first 8 minutes the washing
machine measures how much water is
being absorbed by the laundry and
uses this to calculate the load. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The following are selected via the
display:
Programmable functions
– wash temperature
The programmable functions can be
used to tailor washing programmes to
suit your individual requirements. In
programming mode, the display will
show the function selected.
– spin speed
– programmable functions
– cancellation of a programme
– safety lock
The display also shows:
– the programme duration
– the programme sequence
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Setting the language
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the programmable
functions.
!
deutsch
^ If the language shown is not the one
you want, select the language you do
want by turning the programme
selector. Confirm your selection by
pressing the Start/Stop button.
This washing machine has
undergone a thorough functional test
in the factory and there will be some
residual water in the drum from this
process.
Reminder to remove transit bars
For safety reasons, spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without laundry
and without detergent.
To avoid the risk of damage, the
transit bars must be removed before
the machine is used for the first time.
See "Installation and connection" for
instructions on how to do this.
Using detergent could result in an
excessive build-up of foam.
^ After removing the transit bars (if this
has not already been done by your
fitter), press the Start/Stop button.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
Running your first programme
Run a Cottons 60°C programme without
any laundry and without detergent.
^ Press the jk button in.
^ Open the stopcock.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
^ Press the Start/Stop button.
^ At the end of the programme switch
the machine off.
The welcome screen will appear in
the display every time the machine is
switched on until a programme
lasting longer than 1 hour has been
completed.
The machine is now ready for use.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy
usage are determined by the size of
the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent with
smaller loads (approx. 1/3 less than
the amount recommended can be
used when washing a half load).
– Use the Automatic plus and
Express 20 programmes for small
loads.
– When smaller amounts of laundry are
washed using the Cottons
Choosing the correct extra option
(Short, Pre-wash and Pre-wash +
soak)
programme, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.
Select:
– A wash programme together with the
Short extra option for light to normal
soiling where there are no obvious
marks.
– Using the Cottons 60°C programme
instead of the Cottons 95°C
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
programme will give energy savings
of between 35% and 45%. This is
sufficient for most levels of soiling.
– A wash programme together with the
Pre-wash + Soak extra option for
heavily soiled laundry.
– The Pre-wash extra option for laundry
with large amounts of dirt (e.g. dust,
sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
Brief instructions
,If you use a solvent-based clean-
ing agent (e.g. one containing ben-
zene) to pre-treat a stain, make sure
that any plastic parts (e.g. buttons)
are protected, and that the cleaning
agent is rinsed off before washing the
garment in the machine.
The headings numbered A, B, C, . . .
show the operating sequence and can
be used as brief instructions.
ASort the laundry
,Do not use solvent-based
cleaning agents in this machine.
^ Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
^ Empty all pockets.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
– Curtains: Remove lead weights first
or place in a laundry bag.
components in the machine.
– Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
^ Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
– Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturer's
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
– Close any zips, fasten hooks and
eyes etc before washing.
– Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
Do not wash any items in this machine
which are specified by the
manufacturer as not washable on the
care label. (h symbol)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
BSwitch on the washing machine
DSelect a programme
CLoad the drum
^ Press the Door button to open the
drum door.
^ Unfold the laundry and load loosely
into the drum. Mixing both large and
small items gives better wash results
and also helps distribute the load
evenly during spinning.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this causes creases and reduces
cleaning efficiency.
^ Turn the programme selector
clockwise or anti-clockwise to the
required programme. The
Make sure that no items are caught
between the drum door and seal.
programme indicator light for the
programme selected will come on.
ESelect a temperature / spin speed
The suggested temperature and/or spin
speed can be changed.
1:49
60°
1400
^ Press the Temperature button to alter
the temperature and press the Spin
speed button to alter the spin speed.
^ Shut the door with a gentle swing.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
FSelect an extra option(s)
Pre-wash+
The Pre-wash+ button is used for
activating the Pre-wash option on its
own as well as a Pre-wash with an
additonal soak time of one or two hours.
Press the button:
x 1 = Pre-wash
x 2 = Pre-wash + 1 h soak
x 3 = Pre-wash +2 h soak
x 4 = No options selected
Extra quiet
^ Select an extra option by pressing
the appropriate button. The relevant
indicator light will come on to show
which extra option has been
selected.
If using your washing machine during
quiet periods, you can reduce the noise
levels even more.
The machine will activate the Rinse
hold (e) option and not spin if the
Extra quiet option is selected. The
programme duration is longer.
Not all the extra options are suitable for
use with every programme.
You can only select extra options which
are compatible with the programme
being used.
To deactivate Rinse hold
^ Use the Spin speed button to select
the spin speed you want.
Short
For light to nomal soiling with no visible
staining.
The duration of the main wash is
reduced.
Water plus
The water level in the main wash and
the rinses will be increased if the Water
plus option is selected.
However, you can select other settings
for Water plus. These are described in
"Programmable functions".
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
GAdd detergent
It is important to dispense the correct
amount, because . . .
. . . too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to the
laundry.
– Limescale deposits on the heater
elements.
^ Pull out the detergent drawer and
place detergent in the compartments
as follows:
. . . too much results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
i
Detergent for the pre-wash (divide
the total recommended amount as
follows: add 1/3 to compartment i
and 2/3 to compartment j).
– Higher water consumption (an
additional rinse cycle will
automatically switch in).
j
– A burden to the environment.
Detergent for the main wash,
including Soak if selected
§
Fabric conditioners or liquid starch
^ Close the detergent drawer.
See "Detergent" for further information.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
HStart the programme
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
^ Press the flashing Start/Stop button.
The estimated programme duration will
appear in the display once the
programme has started. During the first
8 minutes the machine measures how
much water is being absorbed by the
laundry. The programme duration may
be longer or shorter depending on this
absorbency rate.
discoloured themselves.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
IRemove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
0:00 Anti-crease
^ Switch the machine off with the
and
jk button.
0:00 Finish
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
^ Press the Door button to open the
drum door.
^ Remove the laundry.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
To omit the final spin (Rinse hold)
^ Select the Rinse hold (e) setting
using the Spin speed button. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
Programme
Cottons
rpm
1400
1200
600
Minimum iron
Delicates
Woollens /
Proofing
1200
1000
1400
1200
1200
600
Express 20
Automatic plus
Dark garments / Denim
Shirts
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
Intensive plus
Spin
1400
1400
1400
Separate rinse/Starch
– To end the programme:
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
Rinse and interim spin
To omit rinse and interim spin and
the final spin (No u)
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
^ Select the No u setting using the
Spin speed button.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons 9ö8E76*
cold to 95°C
Max. load 7.0 kg
Fabric
Cotton, linen or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Note for test institutes:
Short programme: 3.5 kg load and Short extra option
Minimum iron
cold to 60°C
Max. load 3.5 kg
43218E76*
Fabric
Synthetic and mixed fibre garments as well as easy care cottons.
If fabrics have a high proportion of man-made fibres it is advisable
to programme the machine for "Gentle action". See
"Programmable functions".
Note
Reduce the spin speed for fabrics which crease easily.
Delicates 4321ac*
cold to 60°C
Max. load 2.5 kg
Fabric
For delicate garments made of synthetic fibres, mixed fibres,
rayon and easy care cottons.
Note
Select No u (No spin) for items which crease easily.
Woollens /ac*
cold to 40°C
Max. load 2.0 kg
Fabric
Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.
Note
Reduce the spin speed for items which crease easily.
Proofing
Item
40°C
Max. load 2.5 kg
For treating microfibre fabrics, skiwear, and table linen made from
mainly synthetic fibres to provide a water and stain resistant finish.
Notes
– The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Express 20 76*
cold to 40°C
Max. load 3.5 kg
Fabric
Cotton and minimum iron garments that have hardly been worn or
are only very lightly soiled.
Note
The Short extra option will be activated automatically.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Automatic plus 7621*
cold to 40°C
Max. load 5.0 kg
Fabric
Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
Note
The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.
Dark garments / Denim
cold to 60°C
Max. load 3.0 kg
Fabric
Notes
Black and dark garments made from cotton, mixed fibre or denim.
– Wash inside out.
– Denim often contains excess dye and may run during the first
few washes. Wash light and dark coloured items separately.
Shirts
cold to 60°C
Max. load 2.0 kg
Notes
– Pre-treat collars and cuffs if necessary.
– Wash silk shirts and blouses in the Delicates programme.
Intensive plus
cold to 95°C
Max. load 7.0 kg
Fabric
Mixed loads of heavily soiled garments suitable for the Cottons
and Minimum iron programmes. Sort according to colour.
Notes
– The pre-wash additional function will be activated automatically.
– The duration of the main wash will be longer.
Spin
Notes
– To drain only: Select No u (No spin).
– Make sure you select the appropriate spin speed.
Separate rinse/Starch
Max. load 7.0 kg
Fabric
– For rinsing handwashed items.
– For starching table cloths, serviettes and workwear.
Notes
– Use a low spin speed for items which crease easily.
– Items for starching should be freshly laundered but not treated
with fabric conditioner.
* Please note that the "buckets" represent garment care label symbols. See
"Garment care label symbols".
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Extras
The following extra options can be selected in addition to the programme:
Cottons
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Minimum iron
Delicates
Woollens /
Proofing
X
X
X
X
X
X
Express 20
Automatic plus
Dark garments / Denim
Shirts
X1)
X
X
X
X
X
X
X
X
X
Intensive plus
Spin
X2)
Separate rinse/Starch
X
X1) = The extra option is activated automatically as part of the programme
X2) = The extra option is activated automatically as part of the programme and
cannot be deselected
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
Washing
Ironing
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
The number of dots indicates the
ironing temperature
I
H
G
Hot iron (max sole plate temp.
approx. 200°C)
Medium hot iron (max sole
plate temp. approx. 150°C)
9
4
c
/
No bar under the symbol: =
normal agitation
Cool iron (max sole plate
temp. approx. 110°C). Do not
steam iron garments carrying
this symbol.
One bar under the symbol: =
reduced agitation
Two bars under the symbol: =
much reduced agitation
J
Do not iron
Hand wash (if no temperature
is specified use the lowest
temperature or cold)
Professional cleaning
f
p
Dry clean only. The letters
indicate the type of cleaning
agent required.
h
Do not wash
w
Professional Wet Clean only
Do not dry clean
Drying
D
The number of dots indicates the
drying temperature
Bleaching
q
r
s
Normal temperature
Low temperature
Do not tumble dry
x
{
Any oxidising bleaching
agent can be used
Only use an oxygen based
bleach or a non-chlorine
bleach
z
Do not bleach
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
level
Wash
Water Rinses Interim
Final
spin
rhythm
level
(
e
e
e
–
spin
L
L
–
Cottons
d
(
e
e
(
d
(
(
a
c
2-41)2)
2-33)
3
L
L
L
L
L
L
L
L
Minimum iron
Delicates
d
Woollens /
Proofing
f
2
L
–
d
–
Express 20
Automatic plus
b
d
e
d
2-33)
2-33)
3
L
L
–
abc
b
Dark garments /
Denim
Shirts
e
(
–
c
a
–
e
(
–
2
–
L
–
L
L
L
L
Intensive plus
Spin
2-41)2)
–
–
Separate rinse/Starch
(
c
–
–
Please see next page for description of the symbols
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
d = Low water level
( = Medium water level
e = High water level
a= Intensive rhythm
b= Normal rhythm
Special features in the programme
sequences:
Anti-crease:
At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened and laundry
removed at any time during the
anti-crease phase.
c= Gentle rhythm
d= Sensitive rhythm
e= Ultra sensitive rhythm
f= Handwash rhythm
1)
A second rinse is carried out when a
This machine has fully electronic
controls with automatic load
temperature of 60°C to 95°C has
been selected. A third rinse is
carried out when a temperature
below 60°C is selected.
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
2) An third or fourth rinse is carried out
if:
– there is too much foam in the drum
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
– a spin speed lower than 700 rpm has
been selected
– No u has been selected.
3)
A third rinse is carried out if:
The display shows the stage the
programme has reached.
No u has been selected.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Cancelling a programme
Changing a programme
You can cancel a programme at any
time after it has started.
After the start of a programme it is no
longer possible to select a different
programme.
^ Press the Start/Stop button.
Temperature
Cancel programme
It is possible to select a different
temperature up to 5 minutes after the
programme has started.
^ Press the flashing Start/Stop button
again.
The suds will be pumped away.
If you want to remove the laundry:
^ Press the Door button.
^ Press the Temperature button.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
If you want to select a different
programme:
^ Press the Spin speed button.
^ Switch the machine off with the
jk button.
Extra options
^ Switch the washing machine back on
It is possible to select or deselect the
Short and Water plus extra options up
to five minutes after the programme has
started.
again.
^ Check that there is still detergent in
the detergent drawer. Add detergent,
if necessary.
A programme cannot be cancelled
or changed if the safety lock has
been activated.
^ Select and start a new programme.
Interrupting a programme
^ Switch the machine off with the
jk button.
To continue with the same programme:
^ Switch the machine back on with the
jk button.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry
Safety lock
after a programme has started
The safety lock prevents the machine
from being opened and programmes
from being cancelled during a wash
programme.
^ Press the Door button to open the
drum door.
^ Add or remove items.
^ Close the drum door.
To activate the safety lock
The programme will continue
automatically.
^ Press and hold in the Start/Stop
button after the programme has
started.
Please note:
Stop or in 3 secs 0
Once a programme has started the
machine cannot recognise any
adjustment to the load.
^ Keep the Start/Stop button pressed in
until the time has elapsed and the
following appears in the display:
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
Locked 0
The safety lock is now activated. It is
deactivated automatically at the end of
the programme.
To deactivate the safety lock
The door cannot be opened, if:
^ Press and hold in the Start/Stop
button after the programme has
started.
– the suds temperature is above 55°C.
– the water is above a certain level.
Unlock in 3 secs 0
– the programme has reached the
Final spin stage.
^ Keep the Start/Stop button pressed in
until the time has elapsed and the
following appears in the display:
If you press the Door button when the
above conditions are present, the
following will appear in the display:
Unlocked 1
:
Door locked
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The correct detergent
All modern detergents produced for automatic washing machines are suitable.
Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets
are suitable for full loads, but note that it may be impractical to reduce tablets for
smaller loads. Some tablets do not dissolve as rapidly as others, and may not be
suitable for programmes with short durations.
Do not use biological detergents on silk as the enzymes may damage the silk!
Instructions for use and recommended dosage amounts are given on the
detergent packaging.
Liquid detergent should be dispensed using a ball provided by the manufacturer
for programmes without a pre-wash.
For programmes with a pre-wash you will need to purchase a special container
from the Miele Spare Parts department which sits in the main wash compartment
j of the detergent dispenser drawer . Add liquid detergent to this container for
the main wash and to compartment i for the pre-wash.
See "Optional accessories" at the end of this booklet for details of Miele
branded care products including detergents and fabric conditioner.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Universal Detergent Detergent Specialist Proofing
Fabric
detergent
for
for
detergent agent conditioner
coloureds delicates
Cottons
X
X
X
–
X
X
X
–
–
–
X
–
–
–
–
X
–
–
–
X
–
–
–
–
–
–
–
–
X
–
–
–
X
X
X
X
–
Minimum iron
Delicates
Woollens /
Proofing2)
–
–
Express 201)
Automatic plus
X
X
X
X
X
X
X
X
X
Dark garments /
Denim1)
Shirts
X
X
–
X
X
–
–
–
–
–
–
–
–
–
X
X
X
Intensive plus
Separate rinse/
X
Starch
1)
Use liquid detergent
2)
Only use proofing agents which are stated by the manufacturer as being
"suitable for use on membrane textiles" as these consist of fluorochemical
compounds. Do not use proofing agents which contain paraffin. Add proofing
agents to compartment §.
3)
Use powder detergent
Specialist detergent:
Detergent designed specifically for the wash programme or type of fabric.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The right amount to dispense will
depend on the following:
Water softener
A water softener can be used to cut
down on the use of detergents in hard
water areas. Dispense according to the
amount specified on the packaging.
First add detergent and then the water
softener.
– The quantity of laundry
– The soiling level of the laundry
Lightly soiled
No visible dirt or stains. Possibly
slight body odour.
Miele branded water softening tablets
are available from the Miele Spare Parts
Department or via the internet on
Normally soiled
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Use a quantity of detergent as for soft
Visible dirt and stains and/or dried on water.
soiling.
Miele do not recommend connecting
– The water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
the machine to a household water
softener.
Washing with several
components
If you wash using several components
(e.g. special application detergents),
we recommend always dispensing the
agents into compartment j in the
following order:
1. Detergent
2. Water softeners
3. Stain remover
This way the agents are distributed
more evenly.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Fabric conditioners and liquid
starch
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube and the
fabric conditioner channel, regularly.
See "Cleaning the detergent
Fabric conditioners
make garments soft to handle and help
prevent static cling when tumble
drying.
dispenser drawer". Do not use
powder starch formulations or
viscous liquid starch in the §
compartment as it will clog up.
Starch
stiffens and gives body to items of
laundry, e.g. shirts, tablecloths and bed
linen.
Colour run and dye removers /
dyes
Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme
^ Do not use colour run or dye
removers in this machine.
^ Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Always observe the
manufacturer's instructions carefully.
^ Add the fabric conditioner or liquid
starch to compartment §. Do not
exceed the maximum level mark.
It will be automatically dispensed in the
last rinse. At the end of the programme
a small amount of water remains in the
fabric conditioner compartment §.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Extra cleaning
,Disconnect the machine from the
mains electricity supply and
Carry out a hot wash (70°C or above)
with powder detergent approx. every 6
weeks to help prevent deposits building
up in the machine. These can occur
when washing is mainly done at low
temperatures, and can lead to
withdraw the plug from the socket
before cleaning the machine.
,The washing machine must not
be hosed down.
unpleasant smells. If you have no
reason to wash occasionally at this high
temperature, then run a Cottons 95°C
programme with detergent but no
laundry at regular intervals.
A range of Miele branded cleaning and
conditioning agents is available to
order from the Miele Spare Parts
Department, or via the internet on
Cleaning the detergent
dispenser drawer
External casing and fascia
panel
Remove detergent residues regularly.
Clean the casing using a Miele E-Cloth,
or with a mild, non-abrasive cleaning
agent or soap and water using a well
wrung-out cloth. Wipe dry with a soft
cloth.
^ The drum and any stainless steel
outer panels can be cleaned using a
suitable stainless-steel cleaning
agent following the instructions on
the packaging.
,Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaning agents.
These might damage plastic
surfaces and other components
because of the chemicals they
contain.
^ Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release catch and at the
same time pull the drawer right out of
the machine.
^ Clean the detergent drawer with
warm water.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Clean the siphon.
Cleaning the detergent dispenser
drawer housing
1. Remove the siphon from
compartment § and rinse under
warm running water. Clean the
siphon tube in the same way.
^ Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer housing.
2. Replace the siphon.
If starching frequently, thoroughly
clean the siphon and siphon tube
regularly. A build-up of starch will
cause them to get clogged.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the water inlet filters
To clean the filter in the water inlet
valve:
The washing machine has two filters to
protect the inlet valves.
^ Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew.
These filters should be checked every
six months or so, or more often if there
are frequent interruptions to the water
supply.
To clean the filter in the union in the
open end of the inlet hose:
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
^ Use pointed nose pliers to withdraw
the plastic filter by the bar (see
illustration). Clean, put back and
secure.
The two filters must be put back in
place after cleaning.
^ Remove rubber seal 1 from the
recess.
^ Using pointed pliers, take hold of
plastic filter bar 2, remove the filter
and clean it.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
^ Turn on the stopcock and check the
connection is watertight. If it leaks,
tighten the connection.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
Check whether
The display remains
dark, and the Start/
Stop button indicator
light does not come
on.
There is no power to
the machine.
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
You are asked to enter Access via a code has Enter the code and confirm
a code.
been activated.
the entry. Deactivate the code
if you do not wish this
message to appear in the
display the next time the
machine is switched on.
The display is dark.
The display has
switched off
Press a button. Standby
comes to an end.
automatically to save
energy (Standby
mode).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Fault messages in the display
Problem
Possible cause
Remedy A
; lights up in the
display and
– The water outlet is
blocked or
– Clean the drain filter and
the drain pump.
Drain fault
restricted.
– The maximum delivery
head is 1 m.
flashes.
– The drain hose has
been fixed too high.
; lights up in the
display and
– The water inlet is
blocked or
Check whether
– the stopcock is opened
properly.
Water inlet
fault
restricted.
– the inlet hose is kinked.
flashes.
–
the water pressure is too
low.
; lights up in the
display and
The water protection
system has reacted.
Call the Service Department.
Waterproof
fault
flashes.
; lights up in the
display and
There is a fault.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
Technical
fault
flashes.
Anti-crease
Excessive foam has
built up during
washing.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given
on the packaging.
Chk detergent
flashes in the display.
ATo switch off the fault message: Switch the machine off with jk button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems
Problem
Possible cause
Remedy
The machine shakes
during the spin cycle.
The machine feet are not Level the machine (see
level.
"Installation and
connection").
The laundry has not been The machine detected an Include both large and
spun properly and is still imbalance during the final small items in the load as
wet. spin and reduced the this will give better
spin speed automatically. distribution.
The laundry has not spun The spin speed selected Select a higher spin
satisfactorily. was too low. speed next time.
The pump makes strange This is not a fault! These noises occur at the end of a
noises.
pump sequence as a normal part of the operation.
There is a lot of
The water pressure is too – Clean the water inlet
detergent residue in the low.
detergent drawer.
filter.
– Select Water plus.
Powder detergent used
Add washing powder
with water softeners can and then add the water
be sticky.
softener.
Fabric conditioner is not The siphon tube is not
Clean the siphon, (see
completely dispensed or correctly positioned or is "Cleaning and care -
too much water remains clogged up.
Cleaning the detergent
dispenser drawer").
in the § compartment.
The display is in a
different language.
A different language has Set the language you
been selected in the want. The flag symbol
Programmable functions will guide you.
- Language J .
When laundry is dry, it
feels hard to the touch.
Too vigorous wash action. Programme in gentle
action and more water.
Not enough detergent
used.
Increase detergent dose
to prevent limescale
build-up in laundry.
No fabric conditioner
used
Use fabric conditioner in
last rinse.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Possible cause
Remedy
Liquid detergent
does not give the
required result.
Liquid detergents usually – Use a general purpose
contain no bleaching
agents. They do not
remove fruit, coffee and
tea stains.
detergent containing a
bleaching agent.
– Add stain removers into
compartment j of the
detergent dispenser drawer
and liquid detergent into a
dispenser ball.
– Never put stain removers
and liquid detergent together
in the dispenser drawer.
Grey, greasy
Insufficient amounts of
detergent were used to
break down the particles
of grease in heavily
soiled laundry.
– Use more detergent.
particles cling to
washed laundry.
– Before washing the next load
run a Cottons 95°C
programme with powder
detergent but without a load.
White residues
which look like
powder detergent
are seen on dark
textiles after
The detergent contained – Try and brush off the
compounds (zeolites) to
aid water softening
residues with a soft brush
once the laundry is dry.
which are not soluble in
water. They have ended
up on the laundry.
– Wash dark textiles using a
detergent which contains no
zeolites. Liquid detergents
usually contain no zeolites.
washing.
– Use the Dark garments /
Denim programme for dark
coloured laundry.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The drum door does not open when you press the Door button
Possible cause
Remedy
The machine is not
connected to the
Insert the plug in the socket and switch on and/or
switch the machine on with the jk button.
electricity supply and/or is
not switched on.
The safety lock has been
activated.
Deactivate the safety lock as described in
"Changing the programme sequence - Safety
lock".
Access via a code has
been activated.
Deactivate the code as described in
"Programmable functions - Code".
Power cut.
Open the drum door as described in the next
section.
The door was not correctly Press hard against the lock side of the drum door
engaged.
and then press the Door button.
There is still water in the
drum and the machine is
unable to drain.
Clean the drain filter and drain pump as described
in the next section.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the drum door in the
event of a blocked drain outlet
and/or power failure
Blocked drain outlet
If the drain outlet is blocked, up to
25 litres of water will be retained in the
machine.
^ Switch the washing machine off.
There is a lever behind the detergent
drawer fascia panel.
,Caution: if laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
Procedure for draining the machine
^ Place a suitable container under the
access flap.
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
^ Remove the lever.
^ Unscrew the drain filter lid until water
runs out.
To interrupt the flow of water:
^ Use it to open the access flap.
^ Tighten the drain filter back up again.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Once the flow of water ceases:
,Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
Opening the drum door
,Always make sure that the drum
is stationary before reaching into the
machine to remove laundry.
Reaching into a moving drum is
extremely dangerous.
^ Remove the drain filter completely.
^ Clean it thoroughly.
^ Pull the emergency release
downwards (see illustration). The
drum door will open.
^ Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Any foreign object causing an
obstruction should be removed.
^ Put the drain filter back in place and
secure.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, please
contact:
Future updates (PC)
The indicator light marked PC is the
interface used by Miele service
technicians during servicing work for
testing purposes and for updating the
machine's programme data.
– your Miele Dealer or
– Miele (see back cover for contact
details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your machine, both of which
are shown on the data plate visible
above the porthole glass when the door
is open.
Appliance guarantee
Please see the guarantee card
supplied with your machine.
Optional spare parts and accessories
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as
described in these instructions.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
aInlet hose (tested to withstand
pressure of at least 7,000 kPa)
hDetergent dispenser drawer
iDrum door
bElectricity supply cable
jAccess to drain filter, drain pump
and emergency release
c - f Flexible drain hose (with
detachable swivel elbow)
kHandle recesses for moving the
machine
gControl panel
lFour height adjustable feet
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
aProtruding lid for holding when
moving the machine
eTransport clip for inlet and drain
hoses
bElectricity supply cable
fSafety cap for transit bars
cInlet hose (tested to withstand
pressure of at least 7,000 kPa)
gTransport clip for inlet and drain
hoses and for storing transit bars
when not in use.
dDrain hose
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Transporting the washing machine to
its installation site
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
To manoeuvre the machine out of its
packing case to its installlation site,
hold it by the edge of the lid where it
protrudes to the rear of the machine as
well as by the handle recesses at the
front.
Please note:
,Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
^ The machine must be level and
securely positioned.
^ To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
Removing the transit bars
If installing on a wooden joist floor:
^ We recommend a plywood base (at
least 59x52x3 cm). The base should
span several joists and be bolted to
the joists and not only to the
floorboards. Check for the presence
of pipes and cables first.
If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
,If the machine is installed on a
raised plinth, it has to be secured
against slippage during spin using
retaining clips (available from the
Miele Spare Parts Dept). Otherwise
there is the danger of the machine
moving about.
^ To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catch at the top.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
^ Using the spanner supplied, turn the
^ Turn the right-hand transit bar 90°,
left-hand transit bar 90°, then
then
^ withdraw the transit bar.
^ withdraw the transit bar.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
,To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.
,The machine must not be moved
without the transit bars in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).
^ Plug the holes with the plastic caps
as illustrated.
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^ Use a spirit level to check the
machine is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counternut 2 again
using the spanner supplied until it
sits firmly up against the housing.
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
^ Using the spanner supplied turn
counternut 2 in a clockwise direction.
Then turn counternut 2 together with
foot 1 to unscrew.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Washer and Dryer stack
The fitting of building-under kits and
stacking kits must only be
undertaken by qualified and
competent persons, in accordance
with the instructions supplied with
the kit.
A Miele tumble dryer can be stacked
with the washing machine. A "WTV"
stacking kit* is necessary.
Please note:
Building under a continuous
worktop/in a kitchen run
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, the
conversion kit is not necessary.
Otherwise the conversion kit is
essential.
– A special building-under conversion
kit* is required.
To ensure electrical safety, the
washing machine lid must be
replaced by the cover plate supplied
with the conversion kit.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required.
a Safety distance to wall:
at least 2 cm
b Height:
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
Fitting instructions are supplied with the
conversion kit.
Replacing the lid
All parts marked* are available from
your Dealer, the Miele Spare Parts
Department or via the internet at
If the lid has been removed in order to
fit a stacking kit or cover plate, ensure
that, if the lid is replaced, it fits securely
into the rear holders. Otherwise, it is not
properly secure for transport.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The Miele water protection
system
– Overflow protection
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
The Miele water protection system
protects the washing machine from
water damage.
The system consists of three main
components:
3) Drain hose
1) the inlet hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
2) the electronic unit and the washing
machine housing
3) the drain hose
1) Inlet hose
The inlet hose can withstand
pressure of more than 7,000 kPa.
2) Electronic unit and washing
machine housing
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water flowing
into the machine and water in the
suds container is pumped away.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the water
supply
In order to protect the water inlet
valve, the two dirt filters - one in the
open end of the inlet hose, one at
the inlet point in the machine - must
not be removed.
The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
Extension hose
washing machine has been designed
to comply with DIN regulations.
– Longer hoses 2.5 or 4.0 m in length
are available from your Miele dealer
or the Miele Spare Parts Department
as optional extras.
The machine is designed to operate
with a flow pressure of between
100 kPa and 1,000 kPa. If it is higher
than 1,000 kPa it is essential to fit a
pressure reducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" thread. The stopcock should
be fitted by a qualified plumber.
,The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply
and connection to a household
water softener is not recommended.
Maintenance and care
Only use a genuine Miele hose should
you ever need a replacement or
extension. These are tested to
withstand pressure of at least
7,000 kPa.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the drainage
system
Please note:
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can purchased from
the Miele Spare Parts Department or
your Miele dealer.
aAdapter
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact the Miele Spare Parts
Department or your Miele Dealer.
bNut
cHose clip
dEnd of the hose
^ Fit adapter a to the sink drain outlet
using nut b.
Drain hose connection:
1. Direct into a sink or basin:
Please note the following:
^ Attach the end of the hose d to
adapter a.
^ Use a screwdriver to tighten hose
– Hook the hose over the edge and
secure.
clip c up close to the nut.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
2. Connected securely to a plastic
drain pipe with a rubber nipple.
There is no need to use a non-return
valve.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to install
a suitable residual current device
(RCD). Contact a qualified electrician
for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Water Duration
Energy
in kWh
2.20
1.05
0.64
0.77
0.45
0.50
0.38
0.20
0.30
0.32
0.52
0.60
in litres
55
Short
Normal
Cottons
95°C
60°C
60°C
40°C
40°C
40°C
30°C
30°C
40°C
40°C
40°C
40°C
7.0 kg
7.0 kg
3.5 kg
7.0 kg
3.5 kg
3.5 kg
2.0 kg
2.0 kg
2.0 kg
3.5 kg
5.0 kg
3.0 kg
2 h 20 min
2 h 10 min
1)
55
45
1 h 12 min
1)
2)
1)
68
2 h 10 min
45
59 min
Minimum iron
Delicates
55
1 h 09 min
1 h 29 min
59 min
69
49 min
Woollens /
Proofing
39
–
39 min
12
–
40 min
Express 20
Automatic plus
30
20 min
–
30 min
62
1 h 27 min
1 h 12 min
Dark garments /
Denim
52
1 h 02 min
Shirts
60°C
60°C
2.0 kg
7.0 kg
0.95
1.65
59
72
1 h 02 min
–
1 h 12 min
2 h 47 min
Intensive plus
Notes for test institutes:
1)
EN 60456 test programme
2)
Short programme for test institutes; the Short extra option must be selected.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extra options
selected.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
850 mm
595 mm
615 mm
975 mm
820 mm
600 mm
650 mm
96 kg
Width
Depth
Depth with door open
Height for building under
Width for building under
Depth for building under
Weight
Maximum floor load
Capacity
1600 Newton (approx. 160 kg)
7 kg dry laundry
see data plate
see data plate
see data plate
see "Consumption data"
100 kPa (1 bar)
1000 kPa (10 bar)
1.60 m
Voltage
Connected load
Fuse rating
Consumption data
Minimum water flow pressure
Maximum water flow pressure
Inlet hose length
Drain hose length
Mains connection cable length
Max. delivery head
Maximum drainage length
Test certificates awarded
1.50 m
1.60 m
1.00 m
5.00 m
see data plate
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
The option which is currently set will
The programmable functions are
used to alter the machine's
electronics to suit changing
requirements.
have a tick L beside it.
FTurn the programme selector until
the option you want appears in the
display.
Programmable functions can be
altered at any time.
GPress the Start/Stop button to
activate this option.
To access programmable functions
To come out of programmable
functions
The programmable functions are
accessed via the Start/Stop button
and the programme selector.
HTurn the programme selector until
Back A appears in the display.
Before you begin, first ensure that:
IPress the Start/Stop button.
– The washing machine is switched off.
– The machine door is closed properly.
Language
!
The display can be set to appear in
one of several different languages.
APress the Start/Stop button and keep
it pressed in whilst carrying out steps
B to C.
The flag J after the word Language
acts as a guide to prevent a language
which will not be understood from
being set.
BPress the jk button in.
CAs soon as . . .
Language ! ...
The language selected is saved to
memory.
. . . appears in the display, release
the Start/Stop button.
To select a programmable function
DTurn the programme selector until
the programmable function you
require appears in the display.
EPress the Start/Stop button to confirm
your selection.
To alter a programmable function
You can see the different options
available for a programmable function
by turning the programme selector.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Water plus
Gentle action
This programmable function is used
to select the water intake setting for
the Water plus extra option.
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
There are three different options:
Water +
(the machine is delivered with this
option selected)
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
The water level is increased in the wash
and rinse stages.
The washing machine is delivered with
the Gentle action setting deactivated.
Extra rinse
An extra rinse is introduced.
Suds cooling
Water+ & Extra rinse
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling deactivated.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Code
1
2
5
A code can be used to lock the
electronics on the washing machine
to prevent it being used without your
knowledge.
^ Press the Start/Stop button.
The following will appear in the display:
Code activated
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Once the machine is switched off, it
can only be used again if the code is
entered.
Code ...
To use the washing machine when
the code is activated
^ Press the Start/Stop button.
When the machine is switched on
To activate the code
again, the display will request the code.
Activate
^ Enter code 125 as described above
and confirm the entry.
^ Press the Start/Stop button.
The washing machine is now unlocked
and ready for use.
The display will now request that a
code is entered.
To deactivate the code
To enter the code
Make sure the washing machine is
switched off and the door is properly
closed. Press the Start/Stop button and
keep it pressed in whilst you press the
jk button in.
The code is 125 and cannot be altered.
O
__ __
^ Turn the programme selector until the
first number appears in the display.
As soon as . . .
^ Confirm your selection of the number
O
__ __
by pressing the Start/Stop button.
^ Repeat the process until all three
. . . appears in the display, release
numbers have been entered.
the Start/Stop button.
^ Now enter the code and press the
Start/Stop button.
^ Select Code and confirm Deactivate.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Temperature unit
Keypad tone
You can chose for the temperature to
be displayed in
An audible tone sounds each time a
button is pressed.
°C/Celsius or °F/Fahrenheit.
The machine is delivered with the
keypad tone deactivated.
The machine is delivered with
°C/Celsius as the default setting.
Brightness
Buzzer
There are ten different display
brightness settings.
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
The bar chart shows you the setting.
The machine is delivered with the
display brightness on setting 5.
There are two volumes:
The brightness will change as soon as
a different setting is chosen.
Off
(the machine is delivered with this
option selected)
Contrast
The buzzer is switched off.
There are ten different display
contrast settings.
Normal
The bar chart shows you the setting.
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
The machine is delivered with the
display contrast on setting 5.
The contrast will change as soon as a
different setting is chosen.
Loud
The buzzer sounds at maximum volume
(Loud) at the end of a programme or
when Rinse hold is reached.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Standby display
Memory
To save energy, the display goes out
and the indicator light for the Start/
Stop button will start flashing slowly.
The washing machine will store the
most recently selected settings
(programme, temperature, spin
speed and any extra options) in
memory once the programme has
started.
The display will always go out,
– if a programme is not selected within
10 minutes of the machine being
switched on.
These settings will appear in the
display the next time the machine is
switched on.
– 10 minutes after the end of a
programme.
The machine is delivered with the
memory function deactivated.
Pressing one of the buttons switches
the display back on again.
Anti-crease
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
Anti-crease helps prevent creasing if
laundry is not normally removed
immediately after the end of a
programme.
On
The drum will turn at intervals for up to
30 minutes after the programme has
finished.
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
The door can be opened and laundry
removed at any time during the
anti-crease phase.
Not in current prog.
(the machine is delivered with this
option selected)
On
(the machine is delivered with this
option selected)
The standby function is switched off.
The display will remain visible during a
programme.
Anti-crease is activated.
Off
Anti-crease is deactivated.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Miele washing machines offer perfect
care for your laundry and feature a
wide range of special programmes
designed to suit the fabric being
CareCollection
Miele specialist detergents
"Outdoor wear"
washed. Miele have also developed a
range of specialist CareCollection
detergents and conditioning products
to offer you a complete package for
cleaning and caring for your laundry.
This specialist detergent will clean your
water-repellent outerwear with care.
"Sportswear"
The Miele CareCollection detergents
and conditioning products are listed
below. You can order these and many
other useful products via the internet at:
The Miele Sportswear detergent is
designed to clean sportswear whilst
taking care of the special microfibres
used in these garments. It will help to
neutralise and remove odours whilst
protecting the colour of the fabric and
preventing static build-up.
"Down Items"
This special-purpose detergent
All the products can also be ordered
via the Miele Customer Contact Centre
(see back cover for contact details).
contains a mild tenside and has been
specially formulated to keep down-filled
items supple and to give them bounce.
Miele proofing agent
This special finishing agent reproofs
garments against wind and water and
provides a dirt-repellent finish whilst
retaining elasticity and breathability.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
"UltraWhite" detergent
Liquid detergent "For Delicates"
This multi-purpose powder detergent
has excellent stain removal properties
and is suitable for white and light
coloured laundry as well as heavily
soiled coloured items.
This liquid detergent is ideal for the
gentle treatment of delicate fabrics,
such as wool and silk. Its special
formulation cleans effectively at
temperatures as low as 20°C, while
protecting the colour of your delicate
garments.
"UltraColor" detergent for coloured
garments
Fabric conditioner
This liquid detergent is particularly
suitable for cleaning coloured and dark The Miele fabric conditioner will give
garments. The special formulation
offers effective stain removal, even at
low temperatures, while helping to
prevent colours fading.
your laundry a fresh, natural fragrance.
It makes garments soft to handle and
prevents static build-up during tumble
drying.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/1209/W 5740
M.-Nr. 07 483 960 / 00
Download from Www.Somanuals.com. All Manuals Search And Download.
|