Miele Washer 05 536 980 User Manual

Operating instructions

for Washing machine

PREMIER NOVO

It is essential to read these

operating instructions before

installing or using the machine, to

avoid the risk of accidents, or damage

to the machine.

M.-Nr. 05 536 980

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Before using for the first tim e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Flushing out the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Water hardness reminder dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

How to wash correctl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Brief guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Before washin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3

To s tart a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

At the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adding or removing washing after programme start. . . . . . . . . . . . . . . . . . . . . . . 17

Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . interruption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . alteration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . Skipping a programme stag e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8

Adding detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

It is important to dispense the correct amount, because . . . . . . . . . . . . . . . . . . . 19

Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Fabric conditioners, texturisers, liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Automatic fabric conditioners, texturisers, or liquid starch . . . . . . . . . . . . . . . 21

Separate fabric conditioner or texturiser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Starching separatel y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Programme selectio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2

Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Care symbols - washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Soa k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8

Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Electronic programme locking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Programmable functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Maximum water level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Activating the i compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Soak time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

T o p-up rinse for Cottons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Memory function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Cleaning the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Extra cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Cleaning the detergent dispenser drawe r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0

Cleaning the fluff (drain) filter and pum p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1

To c lean the water inlet filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

To c lean the filter in the union in the open end of the inlet hose: . . . . . . . . . . . 43

To c lean the filter in the water inlet valve: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

The programme does not start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

The wash programme stops and a fault indicator light comes on. . . . . . . . . . . . . 45

A fault indicator light comes on but the wash programme continues as normal. . 46

General problems or an unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . 47

Opening the drum door in the event of a power failur e . . . . . . . . . . . . . . . . . . . . . 5 0

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Customer contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Future updates (PC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Removing the transit fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Screwing out and adjusting the fee t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4

Building under a worktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Connection to water suppl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6

Connection to the drainage syste m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7

Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the machine

Front view

aElectric supply cable

eFacia panel with controls

bInlet hose (able to withstand pres-

fDoor

sures of at least 70 bar)

gAccess panel for drain pump, drain

cFlexible drain hose (with detachable

filter and emergency door release

swivel elbow)

hFour height adjustable feet

dDetergent dispenser drawer

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the machine

Control panel

aI-ON/0-OFF button

e"Spin" button

To switch the machine ON or OFF or

For spin speed, Rinse hold and With-

to interrupt a programme.

out final spin

bDoor button

fIndicator lights

Opens the machine door.

Showing the selected spin speed.

cSTART button

gProgramme selector

Starts the wash programme

Can be turned clockwise and

anti-clockwise.

dButtons for additional functions

The upper button is used to select ei-

ther the Soak, pre-wash or Short

wash additional option.

hProgramme sequence indicator

lights

The lower button is used to select the iCheck lights

additional option Water plus.

Indicator light on = selected

Indicator light off = not selected

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

supply. If in any doubt, consult a quali-

fied electrician.

Read the operating instructions be-

fore using this machine for the first

time. They contain important infor-

mation about the safety, use and

maintenance of the machine. This

way you will avoid the risk of acci-

dents and damage to the machine.

Keep these operating instructions in

a safe place and ensure that new

users are familiar with the content.

Pass them on to any future owner of

the machine.

The electrical safety of this appli-

ance can only be guaranteed when

continuity is complete between the ma-

chine and an effective earthing system

which complies with local and national

regulations. It is most important that this

basic safety requirement is regularly

tested by a qualified electrician.

The manufacturer cannot be held re-

sponsible for the consequences of an

inadequate earthing system (e.g. elec-

tric shock).

Correct usage

Do not connect the appliance to

the mains electricity supply by an

extension lead. Extension leads do not

guarantee the required safety of the

appliance (e.g. danger of overheating).

Only use the washing machine to

wash items which are specified by

the manufacturer to be machine-wash-

able on the wash-care label, and tex-

tiles composed of hand-washable wool

or wool blend fabrics as well as satin,

lace, silk and other hand-washable gar-

ments.

Any other applications may be danger-

ous. The manufacturer is not liable for

damage resulting from improper use or

operation.

The machine is built in accordance

with current safety requirements.

Unauthorised repairs could result in un-

foreseen dangers for the user, for which

the manufacturer cannot accept re-

sponsibility. Repairs should only be un-

dertaken by a Miele approved

engineer.

This appliance should not be oper-

ated by children. Supervise its use

by the elderly or infirm.

Ensure current is not supplied to the

appliance while maintenance or repair

work is being carried out.

The machine is only completely

isolated from the electricity supply

when:

Technical safety

Before setting up the machine,

check it for any externally visible

damage. Do not install and use a dam-

aged machine.

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the mains, or

– the mains fuse is withdrawn.

Before connecting the machine,

ensure that the connection data on

the data plate (fusing, voltage and fre-

quency) match the mains electricity

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

This machine must only be con-

Before using the machine for the

nected to the on-site water supply

using a new hose kit. Old hoses must

not be re-used. Check the hose regu-

first time, check that the transit fit-

ting at the rear of the machine has been

removed (see section on "Installation").

larly for signs of wear and tear. Change During spinning, a transit fitting which is

in good time to avoid the risk of leaks

and subsequent damage.

still in place may result in damage to

both the machine and adjacent furni-

ture or appliances.

Faulty components must only be

exchanged for Miele original spare

parts. Only when these parts are fitted

can the safety standards of the ma-

chine be guaranteed.

Turn off the stopcock if the ma-

chine is to be left for any length of

time (e.g. holiday), especially if there is

no floor drain (gully) in the immediate

vicinity.

In countries where there are areas

which may be subject to infestation

by cockroaches or other vermin, pay

Flooding danger.

If hooking the drain hose into a

particular attention to keeping the appli- wash basin, check that the water can

ance and its surroundings in a clean

condition at all times. Any damage

which may be caused by cockroaches

or other vermin will not be covered by

the appliance guarantee.

drain off quickly enough to prevent the

sink from overflowing.

Make sure the drain hose is secure, so

that the force of the water flowing out of

the hose does not dislodge it. Other-

wise this will result in flooding.

Use

Take care to ensure that foreign ob-

jects (e.g. nails, needles, coins,

paper clips, etc.) do not find their way

into the machine with the washing (e.g.

in pockets). Foreign objects can dam-

age components of the machine, which

in turn can result in damage to the

washing.

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However it may be suitable for

such usage subject to a risk assess-

ment of the installation being carried

out by a suitably qualified engineer.

Do not install your washing ma-

chine in rooms where temperatures

below freezing may occur. Frozen

hoses may burst under pressure. The

reliability of the electronic control sys-

tem may be impaired at temperatures

below freezing point.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

If the correct amount of detergent

is dispensed, the machine should

Always make sure the drum is sta-

tionary before reaching in to re-

move washing. Reaching into a moving

drum is extremely dangerous.

not need to be descaled. If, however,

you do wish to descale the machine

only use proprietary non-corrosive

descaling agents and strictly observe

the instructions on the packaging. If in

doubt, contact the Miele Customer Ser-

vice Dept. or your Miele Dealer.

Accessories

Accessory parts may only be fitted

when expressly approved by Miele.

If other parts are used, guarantee, per-

formance and product liability claims

will be invalidated.

Textiles which have been

pre-treated in solvent based clean-

ing agents must be thoroughly rinsed in

clean water before being washed in the

machine.

Disposal of your old machine

Before discarding an old machine

unplug it. Render the plug useless.

Cut off the cable directly behind the ap-

pliance to prevent misuse. This should

be done by a competent person.

Never use solvent based cleaning

agents in this machine, as this may

result in damage to component parts

and create toxic fumes. Such deter-

gents also pose a fire and explosion

hazard.

Only use dyes specified by the

manufacturer as being suitable for

use in a domestic washing machine. Al-

ways observe the manufacturer's in-

structions carefully.

Colour run and dye removers con-

tain sulphur compounds which can

cause damage such as corrosion. Do

not use these products in this machine.

For machines with a ‘porthole’

door, remember that the porthole

glass will be hot when washing at very

high temperatures. Do not let children

touch it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing environmentally and economically

– Water consumption and energy us-

– Use the Short wash option for nor-

mally or very lightly soiled laundry.

age are determined by the size of the

load. Load to the maximum recom-

mended for the programme selected.

– Do not exceed the amounts of deter-

gent which may be recommended by

the manufacturer on the packaging.

– The washing times can vary consid-

erably due to the automatic load ad-

justment feature. Depending on the

amount of the load, the main wash

may be shortened and one rinse

omitted.

– Reduce the amounts of detergent

with smaller loads, (e.g. with a half

load, approx. one third less deter-

gent).

– Select the highest suitable spin

speed in the wash programme when

tumble drying afterwards.

– Use the Mixed Wash poly/cottons

programme or the Quick Wash

programme for smaller amounts of

laundry.

– To save energy wash normally and

lightly soiled laundry at lower tem-

peratures. The 95°C Cottons

programme is probably only needed

in exceptional circumstances, e.g.

for oil based stains or where a very

hot wash is required.

– A main wash (programme without

pre-wash) is sufficient to clean nor-

mally soiled laundry.

– By using the additional option Soak

for heavily soiled laundry you can se-

lect a lower temperature in the main

wash.

– Use the additional option Soak in-

stead of Pre-wash with heavily soiled

laundry.

If Soak is followed immediately by a

main wash the same suds are used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Water hardness reminder dial

Several factors including the water

hardness level in your area will affect

how much detergent you should use.

The small dial in the detergent dis-

penser drawer can be set purely as a

reminder of the hardness level.

Before using the machine for the first

time ensure that it is correctly in-

stalled and connected. See the rele-

vant section under "Installation".

Also check that the fluff filter is se-

curely tightened. Otherwise there is

a risk of water leakage during use.

Flushing out the machine

Any residual lubricants and water from

testing still in the machine should be

flushed out as follows:

^ Turn on the stopcock.

^ Do not load any laundry.

^ Add detergent to compartment j,

however only add max.¹/₄of the

amount recommended on the pack-

aging for a full load.

^ Remove the yellow spatula from in-

side the dispenser drawer.

^ Press the I-ON/0-OFF button in.

^ Turn the programme selector to COT-

TONS 60°C.

Important!

This programme must be selected in or-

der to prepare the machine for spinning

and to activate the ball valve.

^ Press the Water plus button in. The

indicator light next to it will come on.

^ Press the "Spin" button repeatedly un-

til the Without final spin indicator light

comes on.

^ Press the START button.

^ Adjust the dial to the appropriate set-

ting (1 = soft, 4 = very hard).

^ When this programme has finished

your washing machine is ready for

using for the first time.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Brief guide

Dark textiles often contain excess dye

and should be washed separately sev-

eral times before being included in a

mixed load. Always wash whites and

coloureds separately.

The headings numbered (A,B,C,...)

show the operating sequence and can

be used as a brief guide.

Before washing

Delicate textiles should be washed sep-

arately in a delicates programme (use a

washing bag where appropriate).

ASort the laundry.

Do not wash any items in this machine

which are specified by the manufac-

turer as non-machine washable on the

care label. (h symbol)

Pre-treat the laundry

Badly soiled areas, e.g. collars and

cuffs, and water soluble stains can be

pre-treated with bar soap, liquid deter-

gent or detergent mixed into a solution

or paste.

With particularly stubborn stains ask

your dry cleaner for advice. Do not

used solvent-based cleaning agents in

this machine.

^ Empty all pockets.

Foreign objects (e.g. nails, coins,

paper clips, etc.) can cause dam-

age to textiles and components in

the machine.

– Curtains:

Remove lead weights and strips or

place in a laundry bag.

– Underwiring and collar stiffeners:

Any loose wiring in bras, shirt collar

stiffeners, etc. should be removed or

sewn in.

Most garments have a textile care label

in the collar or side seam. Sort the

washing by care label symbols. (See

"Programmes - Care symbols" for their

explanation).

– Knitted garments, trousers and

jeans, T-shirts and sweat shirts:

Turn inside out, if recommended by

the manufacturer.

– Close any zips, fasten hooks and

eyes etc. before washing.

– Fasten duvet covers to prevent

smaller items rolling up inside them.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

BPress the Door button.

To start a programme

CLoad the drum.

GPress in the I-ON/0-OFF button.

Unfold washing and load loosely in the

drum. To achieve best results it is ad-

visable to make up mixed loads con-

sisting of both large and small items.

This improves the washing effect and

helps distribute the load evenly to keep

the machine stable and reduce the

noise level during spinning.

– The programme selector should be

pointing to Finish, the indicator light

Anti crease/Finish is lit up in the

sequence display.

Overloading reduces the wash result

and causes more creasing.

Maximum load weights are noted be-

low:

COTTONS . . . . . . . . . . . . . . . . . . 5.0 kg

MINIMUM IRON. . . . . . . . . . . . . . 2.5 kg

DELICATES/SYNTHETICS . . . . . . 1.0 kg

WOOLLENS / . . . . . . . . . . . . . . 2.0 kg

QUICK WASH . . . . . . . . . . . . . . . 2.5 kg

MIXED WASH (Poly/Cottons). . . . 3.0 kg

HTurn the programme selector to

the programme required

See section "Programmes, Programme

survey".

DShut the door with a light swing

but do not slam it. Do not push on

the door to shut it.

Make sure that there is no obstruction

between the drum door and seal.

EOpen the stopcock.

FAdd detergent.

See section on "detergent" for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

ISelect any additional option re-

JSelect a spin speed.

quired.

A maximum of two additional options

can be chosen, provided they are com-

patible with the programme selected,

(see the Programme survey in the Sec-

tion on programmes). Only one option

out of Soak, Pre-wash and Short wash

can be selected.

^ Press the "Spin" button enough times

until the indicator light for the re-

quired final spin speed lights up.

In some programmes the maximum

spin speed is limited. The machine will

not allow a higher spin speed to be se-

lected (see section on "programmes").

^ Press the button for the Soak,

Pre-wash or Short wash additional

options, until the indicator for the

chosen option lights up.

Memory-Function

If the last time a programme was run

an additional option or different spin

speed was selected,the machine will

have stored this information in its

memory.

^ Press the button for the Water plus

option, if required.

An additional option that has been se-

lected can be de-selected by pressing

the button.

The next time that programme is se-

lected the machine offers the additional

option and / or spin already stored in

memory (see "Programmable func-

tions").

KPress the START button.

The programme now starts.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

At the end of a programme

PClose the stopcock.

When the Finish indicator light comes

on the laundry can be removed from

the drum:

QClose the drum door.

Otherwise there is a danger of objects

being placed inadvertently in the drum.

If these remained unnoticed and were

washed in the next load, they could

damage the washing.

LPress the Door button.

MPress and release the I-ON/0-OFF

button and turn the programme se-

lector to the Finish position.

NRemove the washing.

,^{Only remove washing from the}

machine once the drum has

stopped turning, otherwise you may

seriously injure yourself.

OCheck the folds in the door seal for

any small articles e.g. buttons

which might be lodged there.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Adding or removing washing

after programme start

General exceptions:

The door cannot be opened when:

Washing can be added or removed af-

ter the programme has already started,

when using the following programmes.

– the suds temperature is above 55°C.

– the additional option Water plus has

been selected,

– COTTONS

– programme locking is switched on,

– MINIMUM IRON

– WOOLLENS /

– QUICK WASH

– Starch

– the programme has reached the Fi-

nal spin stage.

– MIXED WASH

^ Press the Door button and hold it until

the door springs open.

^ Add or remove items

^ Shut the door.

The programme will automatically con-

tinue.

– Apart from some exceptional cases

the door can be opened during all

sections of COTTONS, WOOLLENS,

QUICK WASH, Starch and MIXED

WASH - Poly/Cottons (high cotton

percentage) programmes.

– With MINIMUM IRON and

MIXED WASH - Poly/Cottons (high

polyester percentage) the door can

be opened during the main wash

with some exceptions.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Programme . . .

To select a different programme pro-

ceed as follows:

. . . interruption

^ With the I-ON/0-OFF button switch off

^ Press the I-ON/0-OFF button.

the appliance.

^ To continue with the same

programme press the I-ON/0-OFF

button again.

^ Turn the programme selector to Fin-

ish.

^ Switch the machine on with the

I-ON/0-OFF button.

. . . alteration

^ Select a new programme.

The machine will accept the following

changes after the START button has

been pressed,

^ Press the START button.

. . . Skipping a programme stage

– selection of a different temperature,

extra selection or de-selection of the

Water plus option can be carried out

up to 6 minutes after start.

^ Turn the programme selector to Fin-

ish.

As soon as the programme sequence

light for the stage at which the

programme should continue starts

flashing:

– the spin speed for final spin can be

changed if the programme permits.

After start it is no longer possible to se-

lect a different programme.

^ Turn the programme selector switch

to the appropriate programme within

4 seconds.

If a different programme or 6 minutes

after start another temperature is se-

lected the indicator light

Anti-crease/Finish flashes. This does

not affect the programme sequence.

The indicator light goes out when the

programme selector is set back to the

programme or temperature previously

chosen.

When programme locking has been

activated the programme cannot be

changed nor can a programme

stage be repeated or left out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding detergent

All modern detergents produced for

automatic washing machines are suit-

able, including liquid, compact (con-

centrated), tablets, liquid tablets and

special application detergents. Use dis-

pensing aids, e.g. balls, if these are

supplied with the detergent. Tablets are

suitable for full loads, but note that it

may be impractical to reduce tablets by

proportion to suit smaller loads.

Water Hardness

Hardness

range

Type of

water

Hardness

level in

°dH

German

(hardness) mmol / l

soft

medium

hard

0 - 1.3

1.3 - 2.5

2.5 - 3.8

over 3.8

0 - 7

7 - 14

14 - 21

over 21

III

very hard

It is important to dispense the

correct amount, because . . .

Woollens and knitwear containing wool

mixtures and hand-washable garments

should be washed using a detergent

specifically designed for washing

woollens.

. . . too little has the following results:

– Laundry will not be properly clean

and will in time become grey and

hard to the touch.

Silk should be washed using a liquid

detergent specifically designed for

washing woollens. Do not use biologi-

cal detergents on silk as the enzymes

may damage the silk!

– Greasy particles cling to the laundry.

– Limescale deposits on the heater el-

ements.

Add detergent according to the amount

recommended on the packaging. The

right amount to dispense will depend

on the following:

. . . too much results in the following:

– Excessive foam.

– Low level of agitation.

– The quantity of laundry.

– Poor washing, rinsing and spinning

results.

– The soiling level of the laundry.

Lightly soiled

No visible dirt or stains. Possibly

slight body odour.

– High water consumption (an addi-

tional rinse cycle will automatically

switch in).

Normally soiled

Visibly dirty and/or just a few slight

stains.

– Burdening the environment.

Heavily soiled

Stains and soiling clearly visible.

– The water hardness level

Check with your local water supplier

if you do not know the water hard-

ness level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding detergent

Water softeners

A water softener can be used to cut

down on the use of detergents in ex-

tremely hard water areas. Dispense ac-

cording to the amount specified on the

packaging. First add detergent and

then the water softener.

Use a quantity of detergent as for soft

water.

Miele do not recommend connecting

the machine to a household water soft-

ener.

If you wash using several components

(e.g. special application detergents),

we recommend always dispensing the

agents into compartment j in the fol-

lowing order:

i = Compartment soak/pre-wash.

This compartment is also used

for starch formulations when

starching separately.

1. Detergent

j = Compartment main wash

2. Water softener

3. Stain remover

p = Compartment fabric conditioner

Water is taken in through compartment

i in the pre-wash.

This way the agents are distributed

more efficiently.

Water is taken in through compartment

j in the main wash. If the capacity of

compartment j is insufficient for the

amount of detergent needed for a

COTTONS programme (e.g. in very

hard water areas), the machine can be

programmed so that water and deter-

gent can also be taken into the main

wash through compartment i , see

"Programmable functions", "Activating

compartment i".

Fabric conditioners,

texturisers, liquid starch

Fabric conditioners make garments soft

and fluffy to handle and help prevent

static cling when tumble drying.

Texturisers are synthetic starch formula-

tions and give body to items e.g. shirts,

tablecloths and bed linen.

Starch gives body to items of washing.

^ Dispense according to the amount

specified on the packaging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding detergent

Automatic fabric conditioners,

texturisers, or liquid starch

Separate fabric conditioner or

texturiser

^ Open the lid of compartment p.

^ Add fabric conditioner or texturiser to

the compartment p.

^ Turn the programme selector to

Starch.

^ Select a spin speed.

^ Press the START button.

Starching separately

^ Measure and prepare starch in ac-

cordance with the manufacturer’s in-

structions.

^ Add the starch to compartment i.

^ Turn the programme selector to

Starch.

^ Add the fabric conditioner, texturiser

or liquid starch. Do not exceed the

maximum level mark.

^ Select a spin speed.

^ Press the START button.

^ Close the compartment lid.

^ Push the drawer back in.

The conditioner, texturiser or liquid

starch is automatically dispensed in the

last rinse. At the end of the programme

a small amount of water remains in the

fabric conditioner compartment p.

If starching frequently, clean the dis-

penser compartment and especially

the siphon tube and conditioner

channel. (See section on the deter-

gent dispenser drawer in "Cleaning

and Care") .

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Programme selection

Programme

Fabric

Temperature

max.

spin speed

COTTONS

Cottons and linen fabrics, e.g. bed linen, table

linen, towelling, jeans, underwear, T-shirts, nap-

pies.

95°C to 30°C

1200

COTTONS

Wash load as for standard tests

60°C

1200

900

MINIMUM IRON

(60°C) white nylon, white polyester fabrics (50°C),

coloured nylon, polyester, cotton and viscose fab-

rics with special finishes, acrylic, cotton fabrics,

coloured polyester / cotton fabrics, (40°/30°C) min-

imum iron fabrics not washable at higher tempera-

tures

60°C to 30°C

DELICATES

Acrylics, acetate and triacetate, socks and stock-

ings in man-made fibres, (not wool or wool blends)

40°C to cold

30°C to cold

40°C to cold

600

Curtains, specified machine-washable by the

manufacturer (pre-wash probably advisable).

WOOLLENS

Programme for machine-washable or hand-wash-

able wool or wool blend fabrics.

1200

Also suitable for satin, lace, silk and other

hand-washable garments*.

QUICK WASH

Very lightly soiled fabrics, which can be washed in

the Cottons programme.

40°C

cold

1200

Starch

Spin

Table cloths, napkins, overalls, uniforms.

Articles which can be spun, e.g. handwashed

items, max weight according to fabric.

Drain

Separate rinse

Articles which should be washed by hand and

only rinsed and spun in the machine.

cold

1200

900

MIXED WASH

Poly/Cottons

Suitable for small loads of garments made from

man-made fibres and cotton garments which can

be washed together. Sort according to colour.

40°C

cold:

If Cold is selected for the temperature, the water is warmed to 24°C. This uniform temperature helps

the effect of the detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

max. load

Additional options

Notes

5 kg

– Soak

With heavily soiled items select Soak or Pre-wash. Wash

dark colours in liquid detergent.

For normally soiled items select Short.

– Pre-wash

– Short

– Water plus

(Option 1,2,3,4)

5 kg

For test institutes:

Programme setting for tests according to EN 60456 Stan-

dard Programme

2.5 kg

– Soak

With heavily soiled items select Soak or Pre-wash

For normally soiled items select Short

– Pre-wash

– Short

If fabrics have a high proportion of man-made fibres

it is advisable to programme the machine for Gentle

Action. see "Programmable functions"

– Water plus

(Option 1,2,4)

1 kg

– Soak

Use the Wool programme for textiles with wool content

Dust in curtains usually makes pre-wash advisable.

Use liquid wool detergent.

– Pre-wash

– Short

– Soak

Fill the drum

loosely / to / – Pre-wash

full

– Short

2 kg

Do not overload

Hand washable garments will not shrink, stretch, matt or felt

beyond the accepted tolerance.

*For satin, lace, silk and other hand washable garments

manually reduce the spin speed or select without final spin.

2.5 kg

5 kg

– Water plus

(Option 1,2,4)

Add less detergent (half load)

The washing should be washed, but not treated with fabric

conditioner.

5 kg

3 kg

– Soak

The water level, number of rinses and programme time are

set automatically in relation to composition of the washing

(see "Programmes" Sequence).

– Pre-wash

– Short

– Water plus

(Option 1,2,3*,4*) *Option is only carried out with a high proportion of cotton.

See Section on Additional options for more details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Sequence

COTTONS¹⁾

MINIMUM

IRON¹⁾

DELICATES

WOOLLENS

Soak

optional

–

Pre-wash

optional

Main wash

–

Top-up rinse from 75°C

Graduated rinsing

No. of rinses

– normal

– part load

programmable

–

from 50°C

3 or 4

–

– short

Rinse and interim spin (rpm)

Final spin (rpm)

Anti-crease, loosen

Rinse hold

max. 1000

max. 1200

max. 30 mins

optional

normal

low

max. 500

max. 900

max. 30 mins

optional

normal

low

–

max. 600

max. 1200

–

max. 600

max. 30 mins

optional

gentle action

high

optional

Wool

Without final spin

Wash rhythm

Water level – Wash

medium

–

Rinse

low

medium

high

Explanations:

ß Programme section included

–

Programme section not included

Load recognition:

The programme sequence is modified in these programmes according to the absorbency of the load.

A 4th rinse automatically switches in if there is too much foam in the drum, or if a spin speed lower

than 700 rpm has been selected.

Wool:

Wool is susceptible to damage from movement when it is wet. The wash action during the course of

the programme is low.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Quick Wash

Starch

Spin

Separate rinse

MIXED WASH

high cotton

content

high polyester

content

–

optional

–

3 or 4

max. 500

max. 1200

max. 30 mins

optional

normal

low

–

max. 1200

–

max. 900

max. 30 mins

optional

normal

low

max. 500

max. 900

max. 30 mins

optional

normal

low

max. 1200

max. 30 mins

optional

normal

low

max. 1200

max. 30 mins

–

optional

gentle action

–

medium

–

high

low

medium

Top-up rinse (programmable):

At the end of the main wash additional water flows into the drum, and the suds are cooled slightly. Hot

water might damage plastic drain pipes.

Graduated rinsing:

The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at inter-

vals thereby minimising crease formation.

Rinse and interim spin:

There is a spin between the rinses.

Final spin:

The maximum spin speed according to the programme can be selected with the Spin button. In the

programmes MINIMUM IRON, DELICATES, and MIXED WASH, the spin speed is automatically limited

to the above stated maximum spin speed.

Anti-crease, loosen:

The anti-crease action guards against the tendency for creases to set in if laundry is not removed from

the drum as soon as a programme has finished. There is drum movement twice a minute. The door

can be opened and laundry removed at any time during the anticrease phase.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Care symbols - washing

Care

Fabric

Description of Programme:

symbols types

process

(select the appropriate temperature ac-

cording to the temperature on the care

label symbol)

no bar

Cottons

Normal (maxi-

mum) machine

action and nor-

mal spinning

Cottons, Minimum iron, Quick wash

single bar

Synthetics Reduced (me- Delicates

dium) machine

action and re-

duced spinning

*If the gentle action option has been

programmed into your machine via the

programmable functions, garments

with a single bar under the care label

f can also be processed using a

Cottons, Minimum Iron, Quick wash,

Mixed Wash or Starch programme.

Woollens Much reduced Hand Wash Woollens programmes.

broken

bar

(minimum) ma-

chine action but

with normal

spinning

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmes

Important - other care symbols

Hand wash (if a temperature

is not specified, use the low-

est temperature or cold)

Do not wash

apf Dry clean

Do not dry clean

Suitable for chlorine bleach-

ing

Do not use chlorine bleach

Tumble dry

At normal temperature

At low temperature

Do not tumble dry

Ironing

Hot iron

Medium hot iron

Cool iron

Do not iron

N.B. If you have any textiles with the

older wash care labels, select a

programme according to the label be-

low:

[:\]

?;\

Cottons

Minimum iron

Delicates

Woollens

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional options

To select an additional option to the ba- Adding detergent for the Soak op-

sic programme press the button for that tion:

option. The indicator light for the option

Add the total amount into compart-

comes on.

ment j or directly on to the laundry

in the drum.

If an additional option is chosen which

is incompatible with the basic

programme, (see Programme selection

chart), the indicator light goes out when

the button is released.

Pre-wash

For heavily soiled and stained items

If a spin speed is chosen which is un-

suitable for the programme (see

Programme selection chart), pressing

the button has no effect.

Short

This shortens the programme running

time. For normally soiled items.

Soak

In the COTTONS, MINIMUM IRON and

MIXED WASH Poly/Cottons

programmes only two rinse cycles are

carried out with a higher water level.

For heavily soiled and stained items

with protein stains (e.g. blood, fats

and oils, cocoa).

– A length of time of between 30 min-

utes and 2 hours can be chosen, in

30 minute periods, for the Soak pro-

cess.

– The machine is set as standard to

two hours soak time.

See the section "Programmable func-

tions" for reprogramming to a differ-

ent time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional options

Water plus

Spin

The water level increases in soak,

pre-wash, main wash and / or rinses,

and / or an extra rinse can be carried

out.

A final spin is carried out at the end

of each of the basic programmes, if a

spin speed had been selected.

Without final spin

You can choose between four options

for the Water plus button.

Interim rinse and spin is carried out in

the relevant programmes.

The options can be called up through

one of the programmable functions,

(see Water plus system in the Section

on programmable functions).

Washing is not spun after the final rinse,

but the water is drained away, and the

machine goes straight into the

anti-crease stage.

Switching off the additional options

Rinse hold

If an additional option is switched on

(and the indicator light in the button is

lit up), the option can be switched off

by pressing the button. The indicator

light goes out.

Interim rinse and spin is carried out

during the programme cycle.

The washing remains suspended in wa-

ter after the final rinse.

This helps to reduce the possibility of

creasing if the washing is left for some

time before being taken out of the ma-

chine.

To continue the programme:

Select the required spin speed with the

Spin button.

The maximum spin speed is automati-

cally limited according to the basic

wash programme chosen, (See

Programme Survey section).

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional options

Electronic programme locking

Switching off programme locking

early

Programme locking prevents the ma-

chine from being opened or the

programme cancelled during a wash

programme.

^ Press the START button for at least 5

seconds.

Exception:

The indicator light Anti-crease/Finish in

the Sequence display flashes.

Switching on programme locking

^ Select a programme, (see Brief guide

to washing correctly).

^ Turn the programme selector to the

programme previously chosen. The

Anti-crease/Finish light goes out.

^ Press the START button for at least 5

seconds.

^ Press the START button for at least 5

seconds.

Programme locking is now activated.

The machine will now not accept any

changes, and the wash programme

proceeds through to the end.

To check if programme locking is

switched on

^ - Press the ‘Spin’ button.

At the end of the wash programme, the

programme locking is discontinued, so

that a new wash programme can be

chosen.

– If the spin speed indicator light does

not change:

Programme locking is activated.

– If the spin speed indicator light

changes:

Programme locking is not activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Selecting the programmable function

Programmable functions enable the

user to introduce further features as

required. They remain stored in

memory until they are cancelled by

the user.

To select the "Maximum water level"

programmable function: turn the

programme selector to -

MIXED WASH Poly/Cottons***.

Activating

Maximum water level

To activate "Maximum water level"

press the START button once.

The Rinses light comes on in the se-

quence display.

The water level for rinsing is automat-

ically raised to the maximum level

where rinse results are particularly

important.

Storing in memory

It is effective for the rinses in the follow-

ing programmes:

To store the "Maximum water level" pro-

grammable function in the memory

SWITCH the machine OFF with the

I-ON/0-OFF button.

- COTTONS

- MINIMUM IRON

- QUICK WASH

The "Maximum water level" programma-

ble function is now stored in the ma-

chine’s memory and is effective in the

programmes described above until

such time as you may wish to deacti-

vate it.

- MIXED WASH - Poly/Cottons

Before the "Maximum water level" pro-

grammable function can be selected

you must first select programming

mode.

Deactivating

Selecting programming mode

To deactivate the use of a maximum

water level in the rinses repeat the pro-

cedure given above from point A as far

as the *** shown above. Press the

START button and the Rinses indicator

light will go out. The function is now de-

activated. Store in memory by pressing

the I-ON/0-OFF button.

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

C. . . switch the machine on with the

I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in

the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Water plus system

programme, e.g. when rinse results are

particularly important.

The Water plus button offers four op-

tions, increasing water level and / or

bringing in an extra rinse cycle. To

activate the option press the Water

plus button when selecting your wash

programme before pressing the

START button.

Before the "Water plus system" pro-

grammable function can be selected

you must first select programming

mode.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

Option 1

Increase in the rinse water level in the

COTTONS, MINIMUM IRON, QUICK

WASH and MIXED WASH -

Poly/Cottonsprogrammes, where for ex-

ample rinse results are particularly im-

portant.

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

C. . . switch the machine on with the

I-ON/0-OFF-button.

Option 2

DLet go of all these buttons.

Increase in the water level in all stages

of the COTTONS, MINIMUM IRON,

QUICK WASH and MIXED WASH -

Poly/Cottons programmes. It is particu-

larly suitable for fabrics that need spe-

cial care, or where extra attention must

be given to dissolving detergent. This

option is already set when the machine

is delivered from the factory.

The indicator light Main wash flashes in

the sequence display.

Selecting the programmable function

To select the "Water plus system" pro-

grammable function turn the

programme selector to - Separate

rinse. The indicator lights in the se-

quence display correspond to the four

options available. As Option 2 has been

set at the factory, when the programme

selector is turned Separate rinse, the in-

dicator light for Option 2 Rinse hold will

come on.

Option 3

An extra rinse cycle is introduced to the

Cottons programme, e.g. when rinse re-

sults are particularly important.

Option 4

Increase in the water level in all stages

of the COTTONS, MINIMUM IRON,

QUICK WASH and MIXED WASH -

Poly/Cottons programmes and adds an

extra rinse cycle to the COTTONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Selecting the Options

Storing in memory

By pressing the START button you can

select the other options. To confirm a

When you have selected the Option you

require, SWITCH the machine OFF with

new selection another indicator light co- the I-ON/0-OFF button. The Option is

mes on and the previous one goes out.

stored in the machine’s memory.

Each time START is pressed a different

indicator light comes on. The indicator

lights correspond the the four options

as follows:

Option 1 = Rinse

Option 2 = Rinse hold

Option 3 = Drain / Spin

Option 4 = Anti crease / Finish

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Activating the i

Selecting the programmable function

compartment

To select the "Activating the i com-

partment" programmable function turn

the programme selector to - Spin ***.

This function should be activated if

traditional "big box" detergents are

used. For the first 10 seconds of the

Cottons main wash cycle water flows

in through compartment i.

Activating

To activate "Activating the i compart-

ment" press the START button once.

The Rinses light comes on in the se-

quence display.

Compartment j may sometimes not

be able to hold the total amount of de-

tergent required when:

Storing in memory

- the water is very hard (over 3.8

mmol/l, water hardness level IV) and

To store the "Activating the i compart-

ment" programmable function in the

memory SWITCH the machine OFF with

the I-ON/0-OFF button.

- the washing is heavily soiled.

In this case compartment i can be

used to flush in the extra detergent for

the main wash.

The "Activating the i compartment"

programmable function is now stored in

the machine’s memory.

Before the "Activating the i compart-

ment" programmable function can be

selected you must first select program-

ming mode.

Deactivating

To deactivate the use of Compartment

i repeat the procedure given above

from point A as far as the *** shown

above. Press the START button and the

Rinses indicator light will go out. The

function is deactivated. Store in mem-

ory by pressing the I-ON/0-OFF button.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

C. . . switch the machine on with the

I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in

the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Soak time

Selecting the programmable function

To select the "Soak time" programmable

function turn the programme selector to

- WOOLLENS Cold.

The Rinse indicator light comes on in

the sequence display. This shows that

a "Soak time" of 2 hours is currently se-

lected (factory setting).

This is accessed for a programme by

pressing the SOAK button on the fa-

cia.

You can programme a soak time of:

- 2 hours (factory setting) or

- 1 hour 30 mins or

- 1 hour or

Selecting a different "Soak time"

By pressing the START button a various

number of times you can select differ-

ent soak times. To confirm that a differ-

ent soak time has been selected, the

previous indicator light goes out and a

new indicator light comes on.

- 30 mins.

A "Soak time" of 2 hours is set at the

factory. If you wish to change this stan-

dard setting to one of the times listed

above, you must first select program-

ming mode.

Each time START is pressed a different

indicator light will come on. The indica-

tor lights correspond to the 4 soak

times available as follows:

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

2 hours =

Rinse

1 hour 30 mins = Rinse hold

1 hour =

Drain\Spin

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

30 mins =

Anti crease\Finish

Storing in memory

C. . . switch the machine on with the

I-ON/0-OFF-button.

When you have selected the soak time

you require, SWITCH the machine OFF

with the I-ON/0-OFF button.

DLet go of all these buttons.

The indicator light Main wash flashes in

the sequence display.

The "Soak time" you have selected is

now stored in the machine’s memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Gentle action

Selecting the programmable function

To select the "Gentle action" program-

mable function turn the programme se-

lector to -

For gentle washing of slightly soiled

items. Drum action is reduced.

WOOLLENS 40 °C ***.

Gentle action can be used with the

COTTONS, MINIMUM IRON, QUICK

WASCH, MIXED WASH - Poly/Cottons

and Starch programmes.

Activating

To activate "Gentle action" press the

START button once.

The Rinses light comes on in the se-

quence display.

If "Gentle action" has been pro-

grammed, every wash cycle in these

programmes is carried out with gentle

action rhythm.

Storing the programmable function

in memory

Before the "Gentle action" programma-

ble function can be selected you must

first select programming mode.

To store the "Gentle action" programma-

ble function in the memory SWITCH the

machine OFF with the I-ON/0-OFF but-

ton.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

The "Gentle action" programmable

function is now stored in the machine’s

memory.

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

Deactivating

If the "Gentle action" programmable

function is no longer required it can be

deactivated. To do so repeat the proce-

dure given above from point A as far

as the *** shown above. Press the

START button and the Rinses indicator

light will go out. The function is now de-

activated. Store in memory by pressing

the I-ON/0-OFF button.

C. . . switch the machine on with the

I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in

the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Top-up rinse for Cottons

Selecting the programmable function

To select the "Top-up rinse for Cottons"

programmable function turn the

programme selector to -

At the end of the main wash addi-

tional water flows into the drum to

cool the suds down.

DELICATES cold ***.

Hot suds can damage plastic drainage

pipes.

Activating

To activate "Top-up rinse for Cottons"

press the START button once.

The Rinses light comes on in the se-

quence display.

Top-up rinse takes place when temper-

atures of 95°C and 75°C are selected.

Top-up rinse should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

Storing in memory

To store the "Top-up rinse for Cottons"

programmable function in the memory

SWITCH the machine OFF with the

I-ON/0-OFF button.

– where the drainage pipes do not

comply with DIN 1986.

The washing machine is delivered with

the "Top-up rinse for Cottons" deacti-

vated.

The "Top-up rinse for Cottons" program-

mable function is now stored in the ma-

chine’s memory.

Before the "Top-up rinse for Cottons"

programmable function can be se-

lected you must first select program-

ming mode.

Deactivating

If the "Top-up rinse for Cottons" pro-

grammable function is no longer re-

quired it can be deactivated. To do so

repeat the procedure given above from

point A as far as the *** shown above.

Press the START button and the Rinses

indicator light will go out. The function

is now deactivated. Store in memory by

pressing the I-ON/0-OFF button.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

C. . . switch the machine on with the

I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in

the sequence display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Memory function

As this programmable function is active

when the machine is first delivered, the

Rinses indicator light will come on in

the sequence display as soon as the

programme selector is turned to

DELICATES 30°C.

If an additional option is selected for

a programme, and / or the spin op-

tion is altered, the machine stores

these changes in memory at the start

of a programme.

To deactivate the "Memory" function

press the START button and the light

will go out. The memory function is now

deactivated.

The memory function is active when the

machine is first delivered but can be

programmed to be switched off.

Storing in memory

Deactivating

To store this setting in memory SWITCH

the machine OFF with the I-ON/0-OFF

button.

First select programming mode.

Selecting programming mode

AThe machine must be switched off

and the drum door closed. The

programme selector must point to

Finish.

Reactivating

To reactivate the memory function re-

peat the procedure given above from

point A as far as the *** shown above.

Pressing the START button again will re-

activate the "Memory" function and the

Rinses indicator light will come on

again. The function is now reactivated.

Store in memory by pressing the

I-ON/0-OFF button.

BPress the additional option buttons

Short and Water plus at the same

time and hold pressed in and:

C. . . switch the machine on with the

I-ON/0-OFF-button.

DLet go of all these buttons.

The indicator light Main wash flashes in

the sequence display.

Deactivating the programmable func-

tion

To de-select the "Memory" programma-

ble function turn the programme selec-

tor to

DELICATES 30°C ***.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the washing machine Extra cleaning

^ Clean the casing with a mild

non-abrasive detergent or soap and

water. Wipe dry with a soft cloth.

Carrying out a hot wash (70°C or

above) with powder detergent approx.

once every six weeks will help to en-

sure that no deposits build up in the

machine. These can occur when wash-

ing is mainly done at low temperatures,

and also lead to unpleasant smells. If

you have no reason to wash laundry oc-

casionally at this high temperature, then

carry out a 95°C COTTONS programme

as a cleaning cycle with powder deter-

gent and no washing, at regular inter-

vals.

^ Clean the facia panel and lid with a

damp cloth and dry with a soft cloth.

^ The drum can be cleaned using a

suitable proprietary stainless steel

cleaner.

Do not use abrasive cleaners, glass

cleaners or all-purpose cleaners.

These might cause damage to the

plastic surfaces because of the

chemicals they contain.

E-cloth

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

Part Number 98013530, which is suit-

able for cleaning surfaces such as

stainless steel, glass, plastic and

chrome without the use of chemicals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the detergent

dispenser drawer

^ Pull out the detergent dispenser

drawer until a resistance is felt.

^ Clean the dispenser compartments

and conditioner channel.

Regularly remove any detergent resi-

dues.

^ Press down the red release catch

and at the same time pull the drawer

right out of the machine.

^ Remove the siphon tube from com-

partment p.

Wash under running warm water and

put back.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the fluff (drain) filter

and pump

Check the fluff (drain) filter initially after

3-4 washes to ascertain how often it is

likely to require cleaning.

With normal cleaning approx. 2 litres of

water run out.

If the drain outlet is clogged, more wa-

ter will be retained in the machine (up

to 25 litres).

Caution: If laundry has been washed

at a high temperature, water drain-

ing out of the machine will still be

hot.

^ Open the flap.

^ Place a dish under the drain fixture.

^ Turn the fluff filter lid round 2-3 times.

Do not take it right out.

Take the (yellow) filter flap opener from

behind the detergent drawer facia

panel, (see illustration above).

With large volumes of water, when the

dish is full screw the fluff filter back into

position, and empty the dish before re-

peating the procedure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

^ Once the flow of water ceases, re-

move the fluff filter completely.

^ Clean the inside of the fluff filter hous-

ing.

^ Clean the fluff filter thoroughly.

Remove any deposits of limescale and

detergent or foreign objects from the

thread of the filter housing and filter unit

(as these objects can cause a leakage

of water). Deposits of limescale are of-

^ Remove any foreign objects (e.g.

buttons, coins, etc.) and fluff.

^ Turn the impeller by hand to check

that it is free to rotate. Any foreign ob- ten a sign of underdosage of powder.

jects causing an obstruction should

^ Put the fluff filter back in place and

be removed.

secure it.

Make sure the fluff filter is securely

tightened. Otherwise there is a risk

of water leakage during use.

After cleaning

^ Pour approx. 2 litres of water into the

detergent dispenser compartment

j to reactivate the ball valve which

keeps detergent in circulation in the

suds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

To clean the water inlet filters

Inspect the inlet hose which is sub-

jected to high pressure while the ma-

chine is in operation. The hose should

be replaced if there are small cracks in

the surface, or if it has been otherwise

damaged.

If replacing the inlet hose only use a

hose able to withstand pressure of at

least 70 bar. Miele’s own hoses meet

this requirement.

The washing machine has two filters to

protect the inlet valves.These filters

should be checked every 6 months or

so, or more often if there are frequent

interruptions to the water supply.

To clean the filter in the union in the

open end of the inlet hose:

^ First turn off the stopcock.

To clean the filter in the water inlet

valve:

^ Unscrew the threaded union connect-

ing the free end of the inlet hose to

the stopcock.

^ Using pliers, carefully loosen the

ribbed plastic nut on the inlet valve,

and unscrew.

^ Remove the rubber seal from the re-

cess.

^ Use water pump pliers to withdraw

the plastic filter by the bar (see illus-

tration). Clean, put back and secure.

^ Using pointed pliers, take hold

of the plastic filter bar, remove the fil-

ter and clean.

^ Put the filter and seal back in the re-

verse order and reconnect the hose.

The two filters must be put back in

place after cleaning.

Turn on the stopcock and check the

connection is watertight.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

With the help of the following notes minor faults in the performance of the appli-

ance, some of which may result from incorrect operation, can be put right without

contacting the Service Department.

,^{Repair work to electrical appliances should only be carried out by a suit-}

ably qualified person in accordance with local and national safety regulations.

Unauthorised repairs could be dangerous.

The chart is divided into the following sections to help you:

– The programme does not start.

– The wash programme stops and a fault indicator light comes on.

– A fault indicator light comes on but the wash programme continues as normal.

– General problems or an unsatisfactory wash result.

The programme does not start.

What to do if ...

Possible cause

Remedy

The Anti-crease/Fin-

ish indicator light is

not on, or the START

indicator light is not

flashing.

There is no power. Check that

– the door is properly closed.

– the mains plug is plugged in.

– the fuse or circuit breaker has

not tripped.

The programme does The washing ma-

Prepare the machine as de-

not start when Spin

has been selected.

chine has not been scribed in "Before using for the

prepared for using first time".

for the first time.

At the end of one

The programme se- Turn the programme selector to

programme you can- lector has not been the Finish postion and then to the

not start the next

programme.

turned past the

Finish postion.

programme you want to run.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

The wash programme stops and a fault indicator light comes

on.

What to do if ...

Possible cause

Remedy

The Check drain indica-

tor light is flashing.

The water outlet is

blocked.

Clean the fluff (drain) filter

and drain pump.

The drain hose has

been fixed too high.

The maximum drain height

is 1 m.

The Check inlet indicator The water inlet is

light is flashing. blocked

– Open the stopcock.

– Start the programme

again.

One of the following indi- There is a fault.

– Press I-ON/0-OFF button

cator lights is flashing:

to release it.

– Soak/Pre-wash

– Main wash

– Rinses

– Turn the programme se-

lector to Finish.

– Press I-ON/0-OFF button

in.

– Rinse hold

– Re-start the programme.

– If the fault indicators oc-

cur again, contact the

Service Department.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

A fault indicator light comes on but the wash programme

continues as normal.

What to do if ...

Possible cause

Remedy

The Check drain light

flashes.

The drain outlet is

restricted.

Clean the fluff (drain) filter

and drain pump.

The Check inlet light

The water inlet is re- – make sure the stopcock is

flashes.

stricted or the water

pressure is too low.

opened wide enough.

– make sure the inlet hose is

not kinked.

The filter in the inlet Clean the filter.

hose is dirty.

The Drain/Final spin indi- The final spin has

cator light flashes in the not taken place. The

programme sequence dis- machine detected

play. an imbalance.

– Loosen and re-distribute

the washing.

– Select the programme

Spin or Drain.

– Take into account the spin

speed of the relevant

programme.

The Anti-crease/Finish in- The position of the programme selector was al-

dicator light flashes in the tered after the start of the programme. Turn the

programme sequence dis- programme selector back to the programme previ-

play.

ously chosen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

General problems or an unsatisfactory wash result

What to do if . . .

Possible cause

Remedy

The machine shakes

The four feet are not

Level the machine. See advice

during the spin cycle. resting evenly on the on installation.

floor.

The laundry has not

been spun satisfacto- lected was too low.

The spin speed se-

Select a higher spin speed

next time.

rily.

The drum door cannot The machine is not

Put the plug in the socket and

be opened by press-

connected to the elec- switch on.

ing the Door button.

tricity supply.

Power cut.

Open the drum door as de-

scribed in the section "Open-

ing the door in the event of a

power failure".

The door was not cor- Press hard against the lock

rectly engaged.

side of the drum door and then

press the Door button.

There is still water in

Clean the fluff (drain) filter and

the drum and the ma- the drain pump.

chine is unable to

drain.

For safety reasons the drum door cannot be opened

when the suds temperature is higher than 55°C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do if ...

Possible cause

Remedy

The pump makes

strange noises.

These do not indicate a fault. They occur at the end of a

pump sequence as a normal part of the operation.

Large residues of de- The water supply pres- – Clean the filter in the water

tergent remain in the sure is too low.

inlet system.

dispenser drawer.

– It may be useful to press the

Water plus button.

Washing powder used Pour washing powder into the

with water softener

tends to become

sticky.

dispenser before adding any

water softener.

Fabric conditioner is The siphon is either in- Clean the siphon, see

not completely dis-

pensed or too much

water remains in the

p compartment.

correctly positioned or "Cleaning and care - Cleaning

clogged. the detergent drawer".

The fabric conditioner Clean the fabric conditioner

channel is clogged.

channel.

Liquid detergent does Liquid detergents do

not give the required not contain bleaching

– Use a general purpose

washing machine powder

containing a bleaching

agent.

– Pour stain removers into

compartment j of the dis-

penser drawer and liquid

detergent into a dispenser

ball.

result.

agents. They do not

remove fruit, coffee

and tea stains.

– Never put stain removers

and liquid detergent to-

gether in the dispenser

drawer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do if . . .

Possible cause

Remedy

Grey, greasy parti- Insufficient amounts of

– Add more detergent.

cles cling to

washed laundry.

detergent were used to

break down the particles

of grease in heavily

soiled laundry.

– Before washing the next load

run a COTTONS 95°C

programme with powder de-

tergent but without a load.

(See also "Extra cleaning" in

Cleaning and Care).

There are white res- The detergent contained – Try and brush off the resi-

idues which look

like powder deter-

gent on dark col-

oured laundry.

compounds (zeolites) to

aid water softening

which are not soluble in

water. These have

dues with a soft brush once

the laundry is dry.

– Use a liquid detergent to

wash dark coloured textiles.

Liquid detergents usually

contain no zeolites.

ended up on the laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Opening the drum door in the

event of a power failure

To check water pressure

^ Place a bucket under the stopcock.

^ Turn on the stopcock.

^ Switch off the washing machine.

^ Open the fluff (drain) filter flap and

drain the water as described in

"Cleaning and care", (fluff (drain) filter

and pump).

If 5 litres of water flow into the bucket in

15 seconds the water pressure is cor-

rect.

Caution: if laundry has been washed

at a high temperature, water drain-

ing out of the machine will still be

hot.

Always make sure the drum is sta-

tionary before reaching in to the ma-

chine to remove washing. Reaching

into a moving drum is extremely

dangerous.

^ Pull the emergency door latch down-

wards (see illustration). The machine

door will then open.

Download from Www.Somanuals.com. All Manuals Search And Download.

After sales service

Customer contact

Appliance guarantee

In the event of any faults which you

cannot remedy yourself please contact

The appliance is guaranteed for a pe-

riod of 1 year.

– Your Miele Dealer or

See the guarantee card supplied with

the machine for further details.

– Your nearest Miele Service depart-

ment (see back cover for the ad-

dress).

Future updates (PC)

The indicator light or check light

marked PC is reserved for the service

engineer, for updates to your machine

in future years.

When contacting the Service Depart-

ment, please quote the Model and Se-

rial nos. of your appliance, both of

which are shown on the data plate visi-

ble above the porthole glass when the

door is opened.

When for example technological devel-

opments offer advanced modifications

to your existing programme cycles, a

service engineer will be able to input

these into your machine controls.

Please note that telephone calls may

be monitored and recorded to im-

prove our service.

Miele will provide information when

such possibilities become available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation surface

Installation

A concrete floor is the most suitable in-

stallation surface for a washing ma-

chine, being far less prone to vibration

during the spin cycle than wooden

floorboards or a surface with "soft"

properties.

Lift the machine from its packaging

base and move it to its site. Please

note:

^ Do not lift the machine by the

drum door.

^ Ensure that the machine feet and the

floor are dry to prevent the machine

from slipping during the spin cycle.

Please note the following points:

^ The machine must be level and se-

curely positioned.

Removing the transit fitting

^ To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

^ If installing on a wooden joist floor, we

recommend a plywood base at least

30 mm thick, 590 x 520 mm wide.

The base should span several joists

and be bolted to the joists, not only to

the floorboards. Check for the pres-

ence of pipes and cables first.

The most stable part of the floor is

usually in the corner.

,^{If the machine is installed on a}

raised plinth, it has to be secured

against slippage during spin using

retaining clips (available from the

Miele Spare Parts Dept).

ATurn the left-hand transit bar 90°.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

BTurn the right-hand transit bar 90°.

DPlug the two holes with the plastic

caps supplied.

,^{The washing machine must not}

be moved without the transit bars in

place.

Store the transit bars in a safe place

for future use. They must be re-fitted

if the machine is to be moved again

(e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the

procedure.

CWithdraw the two bars together with

the support plate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Levelling the machine

The machine must stand perfectly level

on all four feet to ensure safe and

proper operation.

^ With a screwdriver loosen and turn

the foot 1 together with the

counternut 2 to the left, (see illustra-

tion below) and screw out.

^ Put the machine back on all four feet.

^ Use a spirit level to check the ma-

chine is standing level.

Incorrect installation may increase elec-

tricity and water consumption and may

cause the machine to move about.

^ Hold the foot 1 firm using a pipe

wrench and turn the counternut 2 to

the right firmly up against the housing

with a screwdriver.

The four adjustable screw feet are used

to level the machine. All four feet are

screwed in when the machine is deliv-

ered.

All four counternuts must be firmly

up against the housing. Please also

check this for the feet which did not

need adjustment. Otherwise there is

the danger of the machine moving

about.

Screwing out and adjusting the feet

^ Gently tip the machine and prop it up

using a solid wooden wedge for ex-

ample, to ensure stability.

Make sure the machine does not slip

as this could cause injury.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Building under a worktop

Washer and Dryer stack

^ A special building under conversion

kit* is required which includes a

cover plate to replace the machine’s

lid.

A Miele tumble dryer can be stacked

with the washing machine. A WTV

stacking kit* is necessary and can be

purchased from the Miele Spare Parts

Department.

^ Fitting instructions are supplied with

the conversion kit.

* All parts marked with a * are available

from the Miele Spare Parts or Sales De-

partment, and must be fitted by a suit-

ably competent person according to

the instructions supplied with the kit.

N.B. Cover plate

The cover plate must be fitted in place

of the machine’s lid to ensure electrical

safety . However, if you wish to push

your machine under a worktop and

there is space to do this without re-

moving the lid, the conversion kit is not

necessary. Otherwise the conversion kit

is essential.

^ For installation under a work surface

900/910 mm from the floor, a raising

kit* is also required.

^ To ensure electrical safety the con-

version kit and raising kit must be fit-

ted by a suitably qualified installer.

^ Connections for electricity, water and

drainage should be installed in such

a way that they remain accessible

when the machine is in place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connection to water supply

Longer hoses 2.5 or 4 metres in length

are available as optional extras.

The machine should be connected to a

mains water supply in accordance with

standard regulations. In Germany the

washing machine is not required to

have a non-return valve as it has been

designed to comply with the relevant

German DIN standard.

The machine is designed to operate

with a water flow pressure of 1 bar mini-

mum up to 10 bar maximum. The static

water pressure must not exceed 10 bar.

If it is higher than 10 bar it is essential

to fit a reducer valve.

Connection to the mains water supply

should incorporate a mains stopcock

with ³/₄’’ thread. The stopcock should

be fitted by a qualified plumber.

The approx. 1.5 m long ³/₈" pressure

hose should be connected to the stop-

cock via the ³/₄" threaded union.

There is a minimum flow pressure of 1

bar pressure if 5 litres of water flow into

a suitable container in 15 seconds.

The two dirt filters - one in the open end

of the inlet hose, one at the inlet point in

the solenoid valve must not be re-

moved.

This pressure hose is not suitable for

connection to a hot water supply.

Please make sure the washer sits cor-

rectly in the union.

The connection point is subject to

mains water pressure. Turn on the stop-

cock slowly and check for leaks.

If replacing the inlet hose only use a

hose able to withstand pressure of at

least 70 bar. This also applies to all

fixtures and fittings used. Miele origi-

nal parts fulfil this condition.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Connection to the drainage

system

Drain hose connection:

1. Direct into a sink or basin:

The machine drains via a drain pump

with a delivery head of 1 metre.

Please note the following

– Hook the hose over the edge and se-

cure.

The drain hose is 1.5 m long. It must

not be kinked as this restricts drainage.

The swivel elbow at the end of the hose

can be turned in either direction, or can

be detached if required, with a sharp

twist and pull.

– Make sure that the water can drain

away freely without hindrance. Other-

wise there is a risk of water overflow-

ing or of some of the drained water

being sucked back into the machine.

2. Connected securely to a plastic drain

pipe with a rubber nipple. There is no

need to use a non-return valve.

3. Connected securely to a standpipe.

. Connected securely to a floor gully.

If required, the drain hose can be ex-

tended to a length of 5 m. The neces-

sary parts can be purchased from the

Miele Spare Parts Department, or your

Miele dealer.

For a delivery head of more than 1 m

(up to a maximum of 1.8 m) a second

Duo-drain pump is available with the

corresponding conversion kit from the

Miele Spare Parts Department or your

Miele dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Electrical connection U.K.

Where it is necessary to change plugs,

if the colours of the wires in the mains

lead of this appliance do not corre-

spond with the coloured markings iden-

tifying the terminals of your plug, pro-

ceed as follows:

All electrical work should be carried out

only by a suitably qualified and compe-

tent person, in strict accordance with

national and local safety regulations.

The appliance is supplied with a mains

cable with moulded plug for connection

to a 230-240V mains supply. The volt-

age, rated load and fuse rating are

given on the data plate. Please ensure

these match the household mains sup-

ply.

^ The wire which is coloured green and

yellow must be connected to the ter-

minal in the plug which is marked

with the letter E or by the earth sym-

bol z or coloured green, or green

and yellow.

^ The wire which is coloured blue must

be connected to the terminal in the

plug which is marked with the letter N

or coloured black.

Connection should be made via a fused

plug and suitable switched socket

which is easily accessible after installa-

tion. For extra safety it is advisable to

install a residual current device (RCD),

with a trip current of 30 mA (in accor-

dance with DIN VDE 0664, VDE 0100,

section 739). Do not connect via an ex-

tension lead.

^ The wire which is coloured brown

must be connected to the terminal in

the plug which is marked with the let-

ter L or coloured red.

WARNING: THIS APPLIANCE

Ensure power is not supplied to the ap- MUST BE EARTHED

pliance while installation work is being

carried out.

Important

The wires in the mains lead are col-

oured in accordance with the following

code:

Green/yellow = earth

Blue

= neutral

= live

Brown

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Electrical connection U.K.

Non-rewireable plugs BS 1363

If this machine is fitted with a

non-rewireable plug, the following infor-

mation applies:

If the socket outlets are not suitable for

the plug supplied with the product, it

must be cut off and an appropriate plug

fitted. The fuse carrier and fuse should

be removed from the old plug and dis-

posed of.

The plug cut from the flexible cord

should then be disposed of and on no

account be inserted into any socket

elsewhere in the house (electric shock

hazard).

The fuse cover must be refitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is em-

bossed in words on the base of the

plug (as applicable to the design of

plug fitted).

Replacement fuses should be ASTA ap-

proved to BS 1362 and have the cor-

rect rating. Replacement fuse covers

may be purchased from your local elec-

trical supplier or Service agent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Consumption data

Programme

(without any additional op-

tions or

Load

Consumption data

Energy

Water

Programme time

normal short

in kWh

litres

programmable functions)

COTTONS

95°C

5.0 kg

1.70

0.95

0.55

1 h 54 mins 1 h 26 mins

1 h 58 mins 1 h 16 mins

1 h 58 mins 1 h 06 mins

60°C*

40°C

MINIMUM IRON

40°C

2.5 kg

1.0 kg

2.0 kg

0.45

0.40

0.23

1 h 15 mins

58 mins

49 mins

–

DELICATES

30°C

WOOLLENS

30°C

35 mins

* EN 60456

Consumption data can vary from the nominal values given depending on water

pressure, water hardness, water inlet temperature, room temperature, type and

volume of load, fluctuations in the electricity supply and any additional func-

tions selected.

N.B.

Consumption data obtained from a machine designed for the German market.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Data

Height

85.0 cm

59.5 cm

60.0 cm

97.0 cm

92 kg

Width

Depth

Depth with door open

Weight

Max. floor load

Capacity

1600 Newton (ca. 160 kg)

5 kg Dry laundry

see Data plate

Voltage

Rated load

see Data plate

Fuse rating

see Data plate

Water flow pressure min.

Static water pressure max.

Drain pump head max.

Drain pump length max.

Test certificates awarded

1 bar (100 kPa)

10 bar (1000 kPa)

1.00 m

5.00 m

Radio/TV suppression, VDE

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved/3002

M.-Nr. 05 536 980 / V02

This paper consists of cellulose which has been bleached without the use of chlorine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Coffeemaker CVA2650BL User Manual
Miele Saw B 895 D User Manual
MotoSAT Stereo System Antenna User Manual
MTD Lawn Mower Series 410 through 429 User Manual
MTX Audio Speaker T8154A User Manual
Multi Tech Systems Network Card MTCBA G UF2 User Manual
OPPO Digital DVD Player DV 983H User Manual
Palsonic Flat Panel Television TFTV380 User Manual
Panasonic Switch FP ABP8 User Manual
Partner Tech Chainsaw P33XT User Manual