Operating and installation instructions
Refrigerator
with Dynamic cooling
K 9552 iD (-1)
K 9752 iD (-1)
en - GB, HK
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 470 031
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Does your old appliance have a different hinging mechanism? . . . . . . . . . . . . . . 34
Stainless steel front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Weight of the furniture door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Building into a peninsular run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Fitting a furniture door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aSafety lock indicator light
bOn/Off button
dTemperature selector buttons
(+ for warmer; – for colder)
eSuper cool button and
indicator light
cRefrigerator temperature display
fDynamic cooling button and
indicator light
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aDynamic cooling fan
bBottle rack*
fButter and cheese compartment
gEgg tray/Condiment tray
hInterior lighting
cAdjustable shelves
dCondensate channel and
drain hole
iUniversal container*
jBottle shelf
eFruit and vegetable containers *
kBottle divider*
* Depending on model
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and can normally be
recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Rather than just throwing these
materials away, please ensure that they
are recycled.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct application
This appliance complies with all
This appliance is not designed for
~
relevant legal safety requirements.
Improper use of the appliance can,
however, present a risk of both
personal injury and material
damage.
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
– Shops
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on the installation,
safety, operation and care of the
appliance.
– Offices and showrooms
– Hostels and guest houses.
It must only be used as a domestic
appliance to cool and store foodstuffs.
Any other usage is not supported by
the manufacturer and could be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation of the
appliance.
Keep these instructions in a safe
place and pass them on to any
future user.
Safety with children
This appliance is not a toy! To avoid
~
the risk of injury, do not allow children
to play on or near it or to play with the
controls. Older children may only use
the appliance if its operation has been
clearly explained to them and they are
able to use it safely, recognising the
dangers of misuse.
Keep children away from the
~
appliance at all times and supervise
them whilst you are using it.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
The more coolant there is in an
~
appliance, the larger the room it should
Before setting up the appliance,
~
be installed in. In the event of a
check it for any externally visible
damage.
leakage, if the appliance is in a small
room, there is the danger of
Do not install and use a damaged
appliance.
combustible gases building up.
For every 8 g of coolant at least 1 m3 of
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
Before connecting the appliance to
~
the mains supply, make sure that the
rating on the data plate corresponds to
the voltage and frequency of the
household supply.
This appliance contains the coolant
~
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
Isobutane (R600a), a natural gas which
is environmentally friendly. Although it
is flammable, it does not damage the
ozone layer and does not increase the
greenhouse effect. The use of this
coolant has, however, led to a slight
increase in the noise level of the
appliance. In addition to the noise of
the compressor, you might be able to
hear the coolant flowing around the
system. This is unavoidable, but does
not have any adverse effect on the
performance of the appliance.
Care must be taken during the
transportation and setting up of the
appliance that no parts of the cooling
system are damaged. Leaking coolant
can be harmful to the eyes.
The electrical safety of this
~
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly, and
where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).
In the event of any damage:
- avoid open fires and anything which
creates a spark,
If the connection cable is faulty it
~
must only be replaced by a Miele
approved service technician to protect
the user from danger.
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department for
advice.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Safe operation of the appliance is
In countries where there are areas
~
~
only assured if it has been installed and which may be subject to infestation by
connected in accordance with these
operating and installation instructions.
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
This equipment may only be used in
~
mobile installations such as ships,
caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
Correct use
Installation work, maintenance and
~
Never store explosive materials in
~
repairs may only be carried out by
suitably qualified and competent
persons in accordance with national
and local safety regulations.
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held liable.
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
Do not operate any electrical
~
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparking and explosion.
The appliance is only completely
~
isolated from the electricity supply
when:
If storing alcohol with a high
~
percentage proof, make sure it is tightly
closed and stored upright.
Danger of explosion.
– it has been switched off at the wall
socket and the plug has been
withdrawn,
Observe the "use by" dates given on
~
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on the food
manufacturer’s packaging on storage
conditions required.
– the mains fuse is withdrawn, or
– the screw-out fuse is removed in
countries where this is applicable.
Do not connect the appliance to the
~
mains electricity supply by an extension
lead.
Extension leads do not guarantee the
required safety of the machine (e.g.
danger of overheating).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not use sharp edged objects to
~
– remove frost and ice,
Never use a steam-cleaning
~
appliance to clean this appliance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
– separate food which has become
frozen.
They will damage the evaporator,
causing irreversible damage to the
appliance.
Disposal of your old appliance
Before disposing of an old
~
appliance first make the door latch or
lock unusable.
Do not use defrosting sprays or
~
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Be careful not to damage any part of
~
the pipework whilst awaiting disposal,
e.g. by
Do not use any oils or grease on the
~
door seal as these will cause the seal to
become porous with time.
– puncturing the refrigerant channels
in the evaporator.
Do not store cooking oil in the
~
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
Do not block the ventilation gap in
~
the plinth or the top of the appliance
housing unit as this would impair the
efficiency of the appliance, increase
the electricity consumption and could
cause damage to the appliance.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
The appliance is designed for use
~
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
can lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to save energy
Normal energy
consumption
Increased energy
consumption
Installation site
In a ventilated room.
In an enclosed, unventilated room.
In direct sunlight.
Protected from direct sunlight.
Not situated near to a heat source Situated near to a heat source
(radiator, oven).
(radiator, oven).
Where the ideal ambient room
temperature is approx. 20°C.
Where there is a high ambient
room temperature.
Temperature setting with
a thermostat which is
approximate
With a medium setting of 2 to 3.
With a high setting: the lower the
temperature in the compartment,
the higher the energy
(set in stages).
consumption.
Temperature setting with
a thermostat which is
exact to the degree
(digital display).
Cellar section 8 to 12°C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer
than 16 °C.
Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18°C
Wine storage section 10 to 12 °C
Only open the doors when
Use
Frequent opening of the doors for
necessary and for as short a time long periods will cause a loss of
as possible.
coldness.
Store food in an organised way.
If food is not stored in an
organised way, searching for an
item will mean the door is open for
longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Placing hot food in the appliance
will cause the compressor to run
for a long time, as the appliance
will have to work harder to lower
the temperature.
Store food covered or packaged. The evaporation or condensation
of liquids will cause a loss of
coldness in the refrigerator.
Place frozen food in the
refrigerator to defrost.
Do not over-fill the appliance to
allow air to circulate.
Defrosting
Defrost the freezer compartment
when a layer of ice 0.5 cm thick
has built up.
A layer of ice hinders the cold
from reaching the frozen food, and
causes an increase in energy
consumption.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Before using for the first time
Switching on
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
scratching during transportation.
^ Press the On/Off button.
^ Do not remove this foil until the
appliance has been built in.
The temperature display lights up, the
appliance starts cooling and the interior
light will come on when the door is
opened.
^ Treat the stainless steel surfaces with
a proprietary stainless steel
conditioner immediately after
removing the foil (available from the
Miele Spare Parts Department or via
the internet on www.miele.co.uk).
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Important! A stainless steel
conditioner gives long lasting
protection, and helps to prevent
resoiling.
Switching off
^ Press the On/Off button until the
temperature display goes out.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).
Safety lock
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Activating or de-activating the safety Switching off for longer
lock
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ Press and hold the Super cool button
pressed in for approx. 5 seconds.
^ switch off at the wall socket and
withdraw the plug,
The Super cool indicator light flashes,
and a ; flashes in the temperature
display.
^ clean the appliance out and
^ leave the door ajar to air the
appliance.
^ Press the Super cool button again.
; will light up in the display.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
^ You can now choose between ; 0
and ; 1 by pressing the temperature
selector buttons:
0: the safety lock is de-activated,
1: the safety lock is activated.
^ Press the Super cool button to save
the setting.
The safety lock indicator light X will
light up when the safety lock has been
activated.
^ Press the On/Off button to come out
of the setting mode.
If you do not do this, the electronics will
switch over to normal operation
automatically after a couple of minutes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
Setting the temperature in the
refrigerator
Use the two buttons underneath the
temperature display to set the
temperature for the refrigerator.
Press the
The temperature in the appliance will
rise:
+ button : to raise the temperature
(it gets warmer)
– the more often the door is opened
and the longer it is kept open,
– button:
to reduce the temperature
(it gets cooler).
– if too much food is stored in it at
once,
The temperature being set will flash in
the display.
– the warmer the food is which is being
put into it,
When pressing the buttons, the
following information shows in the
display:
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
– When first pressed, the last
temperature selected flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
We recommend a temperature of 4 °C
in the refrigerator.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button, the current average
temperature of the refrigerator is
automatically shown.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full, before checking the temperature
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
The level of brightness can be
adjusted:
Temperature range
The temperature can be adjusted from:
2 °C to 9 °C.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
^ Press and hold the Super cool button
pressed in for approx. 5 seconds.
The Super cool indicator light flashes,
and a ; flashes in the temperature
display.
Temperature display
During normal operation, the
temperature display on the control
panel shows the average temperature
in the refrigerator.
^ Press one of the temperature selector
buttons repeatedly until ^ appears in
the display.
^ Press the Super cool button again.
If the temperature is not within the
range that the appliance is able to
display, bars will flash in the
temperature display.
^ lights up in the display.
^ You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings 1 to 5:
1: dimmest setting,
5: brightest setting.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
^ Press the Super cool button to save
the setting.
^ Press the On/Off button to come out
of setting mode.
If you do not do this, the electronics will
switch over to normal operation
automatically after a couple of minutes.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool and Dynamic cooling
Super cool
Dynamic cooling m
The Super cool function can be used to When the Dynamic cooling function is
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
Switching on Super cool
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
Super cool is particularly
recommended for faster chilling of
large amounts of fresh food or drink.
^ Press the Super cool button. The
Super cool indicator light will come
on.
The temperature is set as normal with
the temperature control.
The appliance will then work at full
power to lower the temperature.
Dynamic cooling should also be
selected when:
Switching off Super cool
– the ambient temperature in the room
is high (above approx. 30 °C), and
The Super cool function will switch itself
off automatically after approx. 6 hours.
The indicator light will go out and the
appliance will run at normal power
again.
– the room humidity level is high.
Switching on Dynamic cooling
To save energy, the Super cool function
can be switched off once food and
drinks are sufficiently chilled.
^ Press the Super cool button. The
Super cool indicator light will go out,
and the appliance will continue to
operate at normal power.
^ Press the Dynamic cooling button
m. The Dynamic cooling indicator
light will come on.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool and Dynamic cooling
Switching off Dynamic cooling
^ Press the Dynamic cooling button
m. The Dynamic cooling indicator
light will go out.
The fan automatically switches off
when the door is open.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Different storage zones
– pre-packed vegetables and other
fresh food with a label stating it
Due to the natural circulation of the air
in the appliance, there are different
temperature zones in the refrigerator.
Cold, heavy air sinks to the lowest
section of the appliance. Make use of
the different zones when placing food
in the appliance.
should be kept at a temperature of
approx. 4 °C.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Danger of explosion.
This appliance has Dynamic
cooling, which helps to keep an
even temperature when the fan is
running. When Dynamic cooling is
switched on, the difference between
the various zones is less
If storing alcohol with a high
percentage proof, make sure it is
tightly closed, and store upright.
pronounced.
Do not store cooking oil in the
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
Warmest area
The warmest area is in the top section
of the door. Use this for storing butter
and cheese.
Food must not touch the back wall of
the refrigerator, as it may freeze to
the back wall.
Coldest area
The coldest area in a refrigerator is
directly above the vegetable
containers.
To allow air to circulate efficiently,
do not pack food too closely
together in the refrigerator. Do not
cover the fan in the rear wall of the
refrigerator, as this is essential for
keeping the appliance cool.
Use this for all delicate and highly
perishable food, e.g.
– fish, meat, poultry,
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream,
– fresh dough, cake mixtures, pizza or
quiche dough,
– soft cheese and other dairy
products,
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Food which should not be
stored in a refrigerator
Storing food correctly
Food should generally be stored
covered or packaged. This will prevent
food smells from affecting other foods,
food from drying out, and also any
cross-contamination of bacteria. The
growth of bacteria, such as salmonella,
can be avoided by setting the correct
temperature and maintaining good
standards of hygiene.
Not all food is suitable for refrigeration,
as some food is sensitive to cold.
Cucumbers, for example, become
glassy, aubergines bitter and potatoes
sweet. Tomatoes and oranges lose their
aroma, and the peel on citrus fruit
hardens.
Food which should not be stored in a
refrigerator includes:
Fruit and vegetables
– pineapple, pomegranate, bananas,
avocado, mangos, papaya, passion
fruit, citrus fruit
Fruit and vegetables may be stored
loose in the vegetable containers.
Please be aware that not all types of
fruit and vegetables are suitable for
storing in the same container. Aromas
and flavours can transfer from one type
of food to another (e.g. carrots absorb
the smell and flavour of onions very
easily). Some food also gives off a
natural gas (ethylene) which speeds up
the rate at which other food perishes.
– fruit which is not yet ripe
– aubergines/egg plant, cucumbers,
potatoes, peppers/capsicum,
tomatoes, courgettes,
– some hard cheeses, e.g. Parmesan
When shopping for food
– Examples of fruit and vegetables
which produce a large amount of
this natural gas are:
The freshness of food when first placed
in the appliance is an important factor
in determining how long it stays fresh,
and how long it can be kept in the
refrigerator. Time out of the refrigerator,
e.g. during transportation, should be
kept to a minimum. For example, do not
allow food to stay in a hot car for too
long. Once food has started to
Apples, apricots, pears, nectarines,
peaches, plums, avocado, figs,
blueberries, melons and beans.
deteriorate, this process cannot be
reversed. As little as two hours outside
the refrigerator can cause food to start
deteriorating.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
– Examples of fruit and vegetables
Meat
which react strongly to the natural
gases given off by other types of
fruit and vegetables are:
Meat should be stored unwrapped.
(Undo wrappings slightly to leave meat
loosely covered, and leave containers
open). This permits air to circulate
Kiwis, broccoli, cauliflower, brussels
sprouts, mangos, honeydew melons, around the meat, allowing the surface
apples, apricots, cucumbers,
tomatoes, pears, nectarines and
peaches.
to dry slightly, which helps prevent the
growth of bacteria. To prevent the risk
of bacterial cross-contamination and
meat deteriorating, do not let one type
of meat come into direct contact with
another type.
Example: Broccoli should not be
stored with apples, as apples
produce a large amount of natural
gas to which broccoli is very
sensitive. The result is a shorter than
expected storage time for the
broccoli.
Unpacked meat and vegetables
Unpackaged meat and vegetables
should be stored separately. To avoid
any microbiological cross-
contamination, these foods may only be
stored together if they are wrapped.
Protein rich foods
Please note that foods rich in protein
deteriorate faster than others.
Shellfish, for example, deteriorates
faster than fish, and fish deteriorates
faster than meat.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Moving the shelves
To move the split shelf:
The shelves can be adjusted according ^ Take both halves of the split glass
to the height of the food.
shelf out,
^ Raise the shelf, pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
^ fit the two brackets onto the supports
on either side at the required height,
Stoppers prevent the shelves from
being dislodged by mistake.
^ and push the glass shelves in one
after the other. The shelf with the
raised edge must be at the back.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
Fruit and vegetable containers
on roller insert
(depending on model)
^ Push the rear half of the glass shelf
up slightly from below.
The fruit and vegetable containers are
pushed in and out on rollers, and can
be completely removed if necessary.
The roller inserts can also be removed
for cleaning.
^ At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Fruit and vegetable containers Adjusting the condiment
on telescopic runners
tray/bottle shelf
(depending on model)
^ Lift the tray/shelf up and out of the
stainless steel frame to remove.
The fruit and vegetable containers are
pushed in and out on telescopic
runners, and can be completely
removed if necessary.
^ Push up the stainless steel frame,
and remove.
^ Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^ Pull the container right out and then
lift it up and off.
^ Replace the tray/shelf in the frame.
Push the runners back in again to
avoid injury or damage.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
To replace a container,
^ place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the container b.
^ Then push the container back in c.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Universal container
Moving the bottle divider
(depending on model)
(depending on model)
The universal container can be used
both to store and serve food.
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
The bottle divider can be removed
completely (e.g. for cleaning).
^ To do this, push up the front edge of
the bottle divider, and disengage it.
It consists of a deep tray a and a
shallow tray b. Both trays fit the
stainless steel frame.
If you wish to use the universal
container to serve food,
^ place the shallow tray b in the
stainless steel frame, and use the
deep tray as a lid a.
You can lift the universal container,
including contents, out of the frame and
take it to the table.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic defrost
The refrigerator defrosts automatically.
Condensate and frost can build up on
the back wall of the refrigerator whilst it
is in use. You do not need to remove
this, as it will defrost and evaporate
automatically with the warmth
generated by the appliance.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
condensate can flow away without
hindrance.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
E-Cloth
Never use cleaning agents
^ A microfibre “E-Cloth” is available
from the Miele Spare Parts
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents. "Non-abrasive"
cleaning agents are also unsuitable
as they can cause matt areas to
appear.
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals. It can
be washed 300 times.
To help prevent re-soiling, treat
stainless steel surfaces with a
Before cleaning
proprietary conditioning agent for
stainless steel (available from the
Miele Spare Parts Department or via
the internet on www.miele.co.uk).
^ Switch the appliance off, switch off at
the socket and remove the plug.
^ Take any food out of the appliance
and store it in a cool place.
Do not let water get into the
electronic unit or the light.
^ Take out any removable parts, e.g.
shelves, for cleaning.
^ The serving trays and containers in
the door can be removed from their
stainless steel frames for cleaning.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Cleaning the interior and
accessories
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
Use warm water with a little washing up
liquid. Accessories and shelves should
all be hand-washed only. The butter
dish is, however, dishwasher safe.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
^ Clean the appliance at least once a
month.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Clean stainless steel surfaces with a
suitable non-abrasive stainless steel
cleaning agent following the
manufacturer’s instructions on the
packaging.
After cleaning
^ Replace all shelves and accessories
in the appliance.
^ Insert the plug in the socket, and
switch the appliance back on.
^ To help prevent re-soiling, a
conditioning agent for stainless steel
should always be used after
^ Switch on the Super cool function for
a while so that the appliance can
cool down quickly.
cleaning. Follow the manufacturer’s
instructions on the label.
^ Place food back in the appliance and
close the door.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the appliance is switching in too
frequently and for too long.
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
^ Check whether ventilation gaps in the
plinth and in the housing unit at the
top have been covered over or
become too dusty.
^ The door has been opened too
frequently, or a large amount of food
has just been put in at once.
unauthorised work.
^ Check that the door has been closed
properly.
Ensure that current is not supplied to
the appliance until after
maintenance or repair work has
been carried out.
. . . bars flash in the temperature
display.
Check the temperature display about 6
hours after switching on the appliance.
The display will not show a temperature
until the temperature in the appliance
has reached a certain level.
What to do if . . .
. . . the appliance does not get cool.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
. . . the following messages show in
the temperature display "F0" to "F5".
^ Check that the plug is correctly
inserted in the socket and switched
on.
There is a fault. Call the Service
Department.
^ Check that the fuse is not defective
and that the mains fuse has not
tripped. If it has, contact the Miele
Service Department.
. . . you cannot switch the appliance
off.
The safety lock has been activated.
. . . the temperature in the refrigerator
is too low.
^ Select a warmer temperature.
^ The Super cool function is still
switched on. Super cool only
switches itself off after 6 hours.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the interior lighting is not
working.
Has the refrigerator door been left open
for too long? The lighting switches itself
off automatically after approx. 15
minutes.
If it also does not come on when the
door is opened briefly, but the
temperature display is working, then
the light is defective.
^ Call the Service Department.
The LED lighting may only be repaired
or changed by a service technician.
Danger of injury and damage.
Should the cover be damaged or
need to be removed due to damage,
exercise caution. Never look at the
lighting with optical instruments
(magnifying glass or similar).
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^ Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Noises
Normal noises
What causes them
Brrrrr...
Humming noise made by the motor (compressor). This noise can
get louder for brief periods when the motor is switching on.
Blubb, blubb....
Click....
A gurgling noise can be heard when coolant is circulating
through the pipes.
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr....
On multi-zone and frost-free appliances you can sometimes just
hear the movement of air circulating inside the appliance.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that you can
easily rectify
What causes them, and what can you do about
them?
Rattling, vibrating
The appliance is uneven: Realign the appliance using a spirit
level, by raising or lowering the screw feet underneath the
appliance.
The appliance is touching another appliance or piece of
furniture: Move it away.
Drawers, baskets or shelves are unstable or sticking: Check
all removable items and refit them correctly.
Are any bottles or containers unstable or knocking against
each other? Separate them.
The transport cable clips are hanging loose at the back of
the appliance: Remove the clips.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– Miele
(see back cover for contact details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance. This
information is given on the data plate
inside your appliance.
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as described
in these instructions.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
delivery. However, you must activate
your cover by calling 0845 365 6640 or
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs (BS 1363)
All electrical work should be carried out The fuse cover must be re-fitted when
by a suitably qualified and competent changing the fuse, and if the fuse cover
person in strict accordance with current is lost, the plug must not be used until a
local and national safety regulations
(BS 7671 in the UK).
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220-240 V 50 Hz supply.
Please ensure that the connection data
quoted on the data plate match the
household mains supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
Connection should be made via a
suitable switched socket which is easily your local electrical supplier.
accessible. For extra safety it is
advisable to protect the appliance with
a suitable residual current device
WARNING
(RCD).
THIS APPLIANCE MUST BE
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
EARTHED
This appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in power could trigger the safety
cut-out mechanism. This could damage
the electronic unit.
The appliance must not be used with
so-called energy saving devices. These
reduce the energy supply to the
appliance which could then become
too warm. Using such devices could
alter the specification of the product.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Climate range
This appliance must be built in,
otherwise it could tip up.
This appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
Location
This appliance should be installed in a
dry, well-ventilated room. It should not be
installed where it is exposed to direct
sunlight or directly adjacent to a
Climate range
Ambient room
temperature
heat-producing appliance such as an
oven or a radiator. The room temperature
should not go above or below the climate
range for which the appliance is
SN
N
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
ST
T
designed. The higher the ambient
Operating in a room which is too cold will
cause the cooling system to switch off for
too long, causing the internal temperature
in the appliance to rise with the risk of
food deteriorating and going off.
temperature of the room, the more
energy the appliance requires to operate.
Important: tropical / humid
environments
During periods of high humidity,
some condensation may appear on
outside surfaces of cooling
Ventilation
Air at the back of the appliance gets
warm. The appliance housing unit must
be constructed to allow sufficient space
for ventilation.
appliances. This condensation will
disappear when humidity levels
drop. For prevention, it is advisable
to install the appliance with sufficient
ventilation in a dry and/or an
A ventilation gap of at least 38 mm
depth must be allowed for behind the
appliance for air to circulate.
air-conditioned room. Please ensure
that doors are closing and sealing
properly. Please ensure that the
appliance is installed in accordance
with these installation instructions
and that the handle is fitted
The air inlet to the appliance is via the
plinth in the housing unit.
The cross-section of the air inlet and
outlet must be at least 200 cm2 to
ensure that air can circulate without
hindrance. Otherwise the appliance has
to work harder, resulting in an increase
in electricity consumption.
correctly. Should you require further
assistance please contact your
Miele customer service centre.
The air vents must not be covered or
blocked in any way. They should be
dusted on a regular basis.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Before installation
^ Before installation remove the cover
strip, sealing strip and other
accessories from inside the
appliance and from the external rear
wall of the appliance.
^ Remove the red transport fixing a,
and use the stopper supplied b to
plug the empty hole.
^ Do not remove the following from the
back of the appliance:
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
– The spacers.
These ensure the gap required
between the back of the appliance
and the wall is maintained.
Does your old appliance have
a different hinging
– Depending on model, the bags
located between the back of the
appliance and the metal grille (heat
exchanger). They are important for
the correct functioning of the
appliance. The contents are
harmless and do not contain toxic
gases.
mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from the Miele Spare
Parts Department.
^ Remove any cable clips from the
back of the appliance.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Stainless steel front
(depending on model)
If the old appliance had a different type
of hinging, or if you cannot or do not
wish to reuse the old furniture door a
stainless steel front can be fitted
instead.
This is available from your dealer or the
Miele Spare Parts Department.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in dimensions
Niche height (mm)
A
K 9552 iD (-1)
K 9752 iD (-1)
1397 - 1413
1772 - 1788
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the door hinges
The door hinges are set ex-works to
enable the door to be opened wide.
– If you would like the appliance door
to be cushioned so that it opens
more softly, the spring tension on the
appliance door can be adjusted.
However, if the opening angle of the
door needs to be limited for any reason,
the hinge can be adjusted to
accommodate this.
To do this, use the allen key supplied to
adjust the door hinges.
– For example, if the appliance door
hits an adjacent wall when opened,
the opening angle can be limited to
90°.
^ Place the locking pins supplied for
limiting the door opening into the
hinges from above.
The door opening angle is now limited
to 90°.
aTo reduce the opening angle:
^ Turn the allen key clockwise.
This tightens the hinges and makes it
harder to open the door wide.
bTo open the door fully:
^ Turn the allen key anticlockwise.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required, follow the
instructions below.
^ Slide the door outwards and lift it off
e.
^ Unscrew the fixing screws d
completely, and loosely screw them
in at the top and bottom on the
opposite side of the appliance f.
To change the door hinging you will
need the following tools:
If you have put locking pins into the
– a cross-slotted screwdriver,
– a screwdriver,
hinges to stop the door opening too far:
– a selection of Torx screwdrivers,
– a spanner.
Appliance door
^ Remove the locking pins from the top
of the hinges.
To remove the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^ Using a screwdriver, carefully push
tension spring a outwards.
^ Open the appliance door.
^ Remove covers a, b and c with a
screwdriver.
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.
^ Loosen fixing screws d at the top
and the bottom slightly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Unscrew mounting b and pull
soft-close mechanism c downwards
to remove it.
^ Replace the hinges in their diagonally
opposite corners b.
^ Use a powered screwdriver to secure
the hinges; screws a are
self-tapping.
^ Undo ball joint d using a spanner
and remove it.
To secure the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^ Stand the appliance door up, and
loosen the hinges at the front (the
hinges remain open).
^ Screw ball joint d of soft-close
mechanism c into the new fixing
holes.
^ Remove screws a, and use the
stoppers supplied c to plug the
empty holes.
^ Push tension spring a inwards
again.
^ Screw mounting b onto the hinge
and tighten securely.
Do not close up the hinges. Danger
of inury.
^ Open out soft-close mechanism c
and hook it onto ball joint d.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Push the appliance door onto the
pre-fitted screws, and then tighten
the screws.
^ Replace covers a, b and c.
^ Replace the locking pins into the top
of the hinges to prevent the doors
opening too far.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Building into a peninsular run
All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
To install the appliance you will need
the following:
– a cross-slotted screwdriver,
– a selection of Torx screwdrivers,
– a hexagon spanner.
Weight of the furniture door
Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted:
Maximum weight of
Appliance
furniture door in kg
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
K 9552 iD (-1)
K 9752 iD (-1)
15
18
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Preparing the appliance
^ Open the appliance door.
^ Slide cover strip a into the holder in
the middle of the appliance as
illustrated with the bumps facing
downwards. The bumps will fit into
the keyhole slots.
^ Using a screwdriver, remove cover
c from the top corner of the
appliance.
^ Position the mains electricity cable so
that the appliance can be connected
easily once installed.
^ Fit cover d onto fixing bracket e.
^ Push the appliance two-thirds of the
way into its niche.
^ Secure fixing bracket e to the top of
the appliance with screws f
(M5 x 15).
When doing this, make sure that the
mains cable does not get trapped.
^ With 16 mm thick furniture walls:
clip spacers b over the hinges.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Building in the appliance
^ Fit cover g onto fixing bracket h.
^ Secure fixing bracket h to the
bottom of the appliance with screws
i (M5 x 15).
^ Carefully remove the protective foil
from sealing strip j.
– With 16 mm thick walls:
The spacers should touch the front
edge at the top and bottom of the
side walls of the housing unit, detail
a.
^ Apply the sealing strip to the side of
the appliance on which the door is
opened so that it is flush with the
front edge of the appliance.
Fit the sealing strip so that it meets
up with the lower edge of top cover
d and then cut the sealing strip
2 - 3 mm above bottom fixing bracket
h.
– With 19 mm thick walls:
The front edges of the top and
bottom hinges sit flush with the front
edge of the housing unit side walls,
detail b.
^ Push the appliance into the niche
until covers d and g touch the front
edge of the side walls of the housing
unit.
^ Make sure that the covers on the top
and bottom fixing brackets sit flush
with the front edges of the housing
unit side walls, detail d.
This will create a gap all round of
42 mm to the front edges of the
housing unit side walls.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
On furniture with door fittings (e.g.
stubs, seals etc) the dimension of
these must be taken into account when
making sure there is a gap all round of
42 mm.
Securing the appliance in the
niche
^ Pull the appliance forwards by the
dimension of the door fitting to keep
the gap at 42 mm all round.
The hinges and the covers will now
protrude by the dimension of the door
fitting.
Tip: Removing the door fittings. This will
ensure that the door is flush with the
surrounding kitchen unit furniture doors.
If the all round gap of 42 mm is not
maintained between the appliance
casing and the front edge of the
housing unit side wall the door may
not shut properly.
^ Press the appliance against the
housing unit wall on the hinge side.
This could lead to a build-up of ice
and condensation and also cause
operational faults.
^ To fix the appliance to the housing
unit at the top and bottom, screw the
long 4 x 20 mm chip board screws a
into the hinges at the top and bottom.
^ Align the appliance height on both
sides by altering the adjustable feet
using the spanner supplied c.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Break off the protruding end of
bottom cover e. It is no longer
required.
^ Fit angled cover g onto bottom fixing
bracket c.
^ Close the appliance door.
Fitting a furniture door
^ Loosen screws b on the top and
bottom fixing brackets c.
^ Press fixing bracket c against the
side wall and tighten screws b.
^ A gap of 8 mm a must be set
between the appliance door and the
central fixing bracket.
^ Attach fixing bracket c to the
housing unit side wall with screws d.
Drill holes in the housing unit side
walls if necessary.
^ Push fitting aids b up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see - on
the diagram).
^ Break off the protruding end of top
cover e, turn the cover around and
fit it on top fixing bracket c.
^ Fit oblong cover f onto top fixing
bracket c.
^ Undo nuts c and take fixing bracket
d off together with the fitting aids.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang the furniture door onto
adjusting bolts h.
^ Loosely attach nuts c on the
adjusting bolts.
^ Hang fixing bracket d with the fitting
aids onto the inside of the furniture
door. Align the fixing bracket
centrally.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Attach the fixing bracket securely
using at least 6 short chipboard
screws e (4 x 14 mm). (On cassette
doors only use 4 screws on the
edges).
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning adjusting
bolts h with a screwdriver.
^ Pull the fitting aids upwards to
remove them f.
^ Tighten nuts c.
^ Turn them around and fit them into
the middle slots on fixing bracket g
for safe keeping.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Securing the appliance door to the
furniture door:
^ Close the door and align it with
neighbouring furniture doors.
^ Screw fixing bracket a into the
pre-drilled holes in the appliance
door using hexagonal screw b.
Make sure the two metal edges c
are aligned (Symbol II).
^ Whilst counterholding the adjusting
bolts i with a screwdriver, tighten
nuts h on the appliance door.
^ Cover strip j must be completely
hidden in the niche, and must not
protrude.
^ Drill fixing holes d in the furniture
door, and screw in 4 x 14 mm screws
e.
^ Tighten all screws again.
(On large or divided doors, attach a
second pair of fixing brackets a in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
– Align depth Z on the furniture door:
Loosen screws f at the top of the
appliance door, and loosen the
hexagon-headed screw g at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
doors and the front edge of the
niche.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Replace all the covers.
To make sure the appliance is
correctly fitted:
– The door must close properly.
– The door must not touch the furniture
carcase.
– The seal at the top edge of the
handle side must fit properly.
To double check place a torch in the
appliance and close the doors. Turn the
lights out in the room. If you can see
any light shining out from the sides
double check the installation.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 1310
K 9552 iD (-1), K 9752 iD (-1)
M.-Nr. 07 470 031 / 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|