Miele Plumbing Product G 7883 User Manual

Operating and Installation

Instructions

Laboratory Glassware

Washer

G 7883

en - US, CA

To prevent accidents

and machine damage

read these instructions

before

installation or use.

M.-Nr. 07 158 260

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Programming functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

The following instructions apply to all programming functions:. . . . . . . . . . . . . . . 34

To access the programming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Saving to memory and exiting the programming mode . . . . . . . . . . . . . . . . . . 34

Exiting the programming mode without saving . . . . . . . . . . . . . . . . . . . . . . . . 34

DOS 1 (liquid detergent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setting the detergent dosage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

DOS 3 (neutralizer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Setting the neutralizer dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Changing program parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

How to change the temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Changing the holding time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Restoring the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Setting the time and date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Data transfer (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Routine checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Thermo switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Please pay attention to the following

notes to maintain safe procedures.

This machine conforms to current

safety requirements. However,

inappropriate use can lead to

personal injury and property

damage. Read the operating

instructions carefully before using

this machine.

The machine should be installed,

commissioned and maintained only by

a Miele Service Technician. Repairs by

unqualified persons could be

dangerous.

Do not install the machine in an area

where a danger of explosion or freezing

may be present.

The manufacturer cannot be held

responsible for damage caused by

non-observance of these Important

Safety Instructions.

Be certain this appliance is properly

installed and grounded by an

authorized technician. To guarantee the

electrical safety of this appliance,

continuity must exist between the

appliance and an effective grounding

system. It is imperative that this basic

safety requirement be met. If there is

any doubt, have the electrical system

checked by a qualified technician. The

manufacturer cannot be held

WARNING - To reduce the risk of fire,

electric shock or injury:

Use

This machine is not intended for any

purpose that is not indicated in the

operating instructions. Conversions,

modifications, and other unintended

uses are considered to be dangerous.

The cleaning processes described here

apply only to those medical products

that are specifically designed by the

manufacturer to be re-used. Follow the

product manufacturer's instructions.

Miele will not be held liable for damage

caused by incorrect use of any kind.

responsible for damage or injury

caused by the lack, or inadequacy, of

an effective grounding system

(e.g. electric shock).

A damaged machine is dangerous.

Turn off the machine immediately at the

main switch and call the Miele Service

Department.

The installation of this unit in non

Personnel operating the machine

stationary locations (e.g. ships) must be

performed by a qualified installer or

service agency in strict accordance

with national and local safety

should be trained regularly. Children

and untrained personnel must not be

allowed access to the machine or its

controls.

regulations and standards.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Take care when handling

processing chemicals (detergents,

If you are exposed to toxic vapors or

processing chemicals, consult the

softeners, neutralizers, etc.). These may manufacturer's material safety data

contain irritant or corrosive ingredients.

Do not use organic solvents as these

could cause an explosion. Wear

protective gloves and goggles. With all

chemical agents the manufacturer’s

safety conditions must be observed.

sheets for emergency procedures.

Always allow mobile units, modules,

inserts, and loads to cool before

removing. Be sure to empty any water

from concave items into the wash

cabinet before removing.

Do not stand, sit or lean on the

After drying open the door to allow

the items and inserts to cool.

opened machine door. This could

cause the machine to tip over, resulting

in injuries and damage.

Never clean the machine or near its

vicinity with a water or high pressure

hose.

Do not touch the heating elements

during or directly after the end of a

program, burns could result. The

elements remain hot for some time after They can cause burning in the mouth

Avoid inhaling powder products.

the end of the program.

and throat if swallowed, and can inhibit

breathing.

The water in the machine must not

be used as drinking water.

Before servicing, disconnect the

power supply by either removing the

fuse, unplugging the unit or manually

"tripping" the circuit breaker.

Be careful when sorting items with

sharp, pointed ends. Carefully position

these items in the machine, so that you

will not hurt yourself or create a danger

for other operators.

Whenever work is conducted on the

tap water network, the water supply line

to the washer must be cleared of air.

Failure to do so can result in damage to

the water softener.

When using this machine regard the

high temperatures and be especially

careful not to scald or burn yourself.

When opening the door bypassing the

electrical lock, a danger of burning,

scalding or corrosion exists or when

using disinfection agents, the inhalation

of toxic fumes. Let baskets and inserts

cool. Empty any water from parts into

the wash cabinet.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

The following points should be

observed to assist in maintaining

quality standards for critical labware

and to avoid damage to the loads

being cleaned.

The machine must only be operated

with water and the recommended

cleaning agents. Organic solvents must

not be used in the machine as there is

the danger, under certain

circumstances, of explosion and

damage to rubber and synthetic

materials. Follow the dosage

recommendations of the cleaning

agent’s manufacturer.

For this type of cleaning, the program

must not be interrupted until completion. In

other words, the On/Off Button must not be

used. Interruptions should also be avoided

for all other programs, such as during

performance testing, because this can

negatively affect the cleaning and rinsing

results. After any interruption, the program

should be restarted from the beginning.

In critical applications where very

stringent requirements have to be met,

it is strongly recommended that all the

relevant factors for the process, such

as detergent, quality of water, etc. are

discussed with a Miele Application

Technology specialist.

Only use cleaning agents

formulated for special processes and

approved by Miele for use with this

machine. Use of unsuitable cleaning

agents could adversely affect the

components of the machine.

It is the responsibility of the operator

to routinely check that the required

cleaning standards are being met.

Therefore, results need to be regularly

tested and documented, both thermo

electrically and through inspection. For

thermo chemical processes, additional

testing is required using chemical or

biological indicators.

Use only Miele approved cleaning

agents with this machine. Use of unsuitable

cleaning agents could adversely affect the

components of the machine. Damages

resulting from using unsuitable cleaning

agents are not covered by the warranty.

The performance of the cycles was

tested using Neodisher products. The

use of other products is not

Pre-treatments with cleaning agents

can create suds, as can certain rinsing

agents. For pre-treatment and / or

cleaning, only use low-sudsing

detergents which have been approved

by Miele. Suds can have an adverse

effect on the cleaning process.

discouraged but may not yield identical

results. Please be aware that changes

in formulation, storage conditions, etc.

which may not be publicized by the

chemical manufacturer can have a

negative effect on cleaning results. and

are not the responsibility of the machine

manufacturer.

If toxic chemicals may be present in

the wash cabinet, beware of this risk

when interrupting a program and

opening the washer. The door seal and

steam condensor must always be

checked for soundness.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

When using cleaning agents and

specialized products, it is essential that

the manufacturer’s instructions are

followed. Only use the product for the

application described by the

manufacturer to avoid any material

damage or the occurrence of strong

chemical reactions.

Accessories

Only genuine, Miele parts and

accessories should be used with this

machine, including Miele mobile units,

baskets and inserts.

Adequate cleaning results cannot

be guaranteed when non-Miele

accessories are used, or when Miele

accessories are altered. Damages

resulting from the use of unsuitable

accessories are not covered by the

warranty.

The mobile units, baskets and

special inserts should only be used for

their specific applications. Instruments

with hollow parts must be flushed

through with wash water.

Empty all containers and utensils

before arranging them in the machine.

Disposal of an old appliance

Obsolete appliances should be

made unusable. To do this, first

Do not allow any remains of acids,

solvents or corroding ferrous material,

and in particular hydrochloric acid or

chloride solutions to get into the wash

disconnect the appliance from the

power supply, then cut off the power

cord. It is important to note that the old

cabinet. The presence in compounds of appliance may be contaminated from

any solvents should be minimal,

(especially those in hazard class A1).

exposure to pathogens, genetically

modified material, blood, etc., and

therefore must be decontaminated

before disposal.

For safety and environmental

protection, be sure to remove all

chemical residue, in compliance with

safety regulations (wear protective

eyewear and gloves!).

To avoid any corrosion damage

ensure that solutions or steam

containing hydrochloric acid do not

come in contact with the stainless steel

casing of the machine.

Please follow the installation advice

in these instructions and the separate

Installation Instructions.

Remove or destroy the door latch, to

prevent children from locking

themselves inside. The appliance can

Please note the following symbols on now be sent for disposal through the

the machine:

proper resource recovery facilities.

Caution : See Operating

Instructions!

SAVE THESE

INSTRUCTIONS

Caution : Danger of electric

shock!

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the lab washer

a "On/Off" button

b "Door" button

j "8 Dosing pump" indicator *

k "Rinse aid" indicator

c Display

l "Neutralizer indicator

d "Display" indicator

e "Drying" indicator

f "Start" indicator

g "Start" 6 button

h "Drying" 0 button

m "Recharge Softener" indicator

n "Fill/Drain" indicator

o Program sequence display

p Program selector

* (only with optional DOS-Module G 60)

i "Display" ß button

(toggles between the elapsed time,

active wash blocks and actual

temperature displays)

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the lab washer

a Connection for optional

DOS-Module G 60

e Powdered detergent dispenser

f Rinse aid reservoir

(with dosage selector)

b Service compartment

c Filter combination

g Rinse aid level indicators

d Salt reservoir

(water softener)

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of the machine

Miele laboratory washers are designed

to clean and rinse laboratory

equipment.

Intended application: Laboratory

equipment

Labware includes a wide range of

items:

In this operating manual, the general

term "labware" is used to cover a range

of laboratory equipment.

– Glassware, such as beakers,

round-bottomed flasks, Erlenmeyer

flasks, bottles, test tubes, separatory

funnels,

Always follow the labware

manufacturer's instructions. Individual

items need to be checked to ensure

that they are designed to withstand the

temperatures and acid / alkaline

environment in the machine.

– measuring vessels, such as

graduated flasks, graduated

cylinders, pipettes

– dishes, such as Petri dishes, watch

glasses, mortars, and

Standard model

The machine is equipped with a water

softener and steam condenser.

– hardware, such as stoppers,

spatulas and stirrers.

Optional additions include:

– serial interface

Labware can be made of glass,

heat-resistant plastic, ceramic,

stainless steel, or coated metal

(e.g., stirrers).

– DOS G 60 liquid pump

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening and closing the door

Electric door lock

Emergency release

The machine is equipped with an

electric door lock.

The emergency release feature

should only be used when it is not

possible to open the door normally,

for example after a power outage.

The door can only be opened when

^ the electrical supply to the machine

is turned on, and the

^ Turn the program selector to f.

^ On/Off switch is pressed.

^ Press the On/Off button to switch off

the machine.

To open the door

^ Press the "Door" button, hold the door

grip and open the door.

,^{Do not touch the heating}

elements when you open the door at

the end of a program. They remain

hot for some time and can cause

burns.

Once a program has started, the door

stays locked until completion and

cannot be opened. However, the two

programs "Rinse" and "Drain" are

exempt from the electric door lock.

The door can be programmed to open

during the "Drying" cycle, if desired.

^ Locate the ring for the emergency

release cable (at the bottom of the

machine, behind the service panel),

and pull the ring downward to open

the door.

To close the door

^ Lift the door upwards and push it

until it clicks shut. Do not press the

release catch while shutting the door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water softener

Before using the machine for the first

time, the water softener should be

programmed. The water needs to be

softened to avoid calcium deposits on

the items being cleaned and in the

machine itself.

If the water supply is harder or softer

than the factory setting (including

below 4 gr/gal or 70 ppm), the setting

will need to be changed. See "Setting

the water softener".

Setting the water softener

^ Use the On/Off button to switch off

the machine.

^ Turn the program selector to f.

^ Simultaneously press and hold the

"Display" ß and "Start" 6 buttons,

while turning the machine on with the

On/Off button.

The current program status P....

will appear in the display, and the

"Fill/Drain" indicator will come on.

– In order to function properly, the

water softener requires a supply of

reactivation salt.

^ Press the "Drying" 0 button once.

E01 will appear in the display.

– The cleaner must be correctly

programmed to match the hardness

of the tap water supply.

^ Turn the program selector one switch

position clockwise (to 1 o'clock).

– Your local water authority can

provide information about the

hardness of the tap water in your

area.

The number 19 will appear in the

display (this indicates the factory

setting in gr/gal).

^ Press and hold the "Display" ß

button until the required value

appears in the display.

If the water hardness is known to

fluctuate, always program for the

highest value.

Please refer to the "Settings" table for

detailed water hardness tables (water

hardness in gr/gal and ppm).

The built-in water softener can be

programmed at settings from

1 - 60 gr/gal or 20 - 1080 ppm.

Once the 60 setting has been reached,

the counter begins again from 0.

It is useful to make a note of your water

hardness so that you can provide the

service technician with this information

in the event of any service calls.

^ Press "Start" 6.

SP will appear in the display.

^ Press "Start" 6 again.

Please note the water hardness in the

space provided here:

The setting you selected will now be

stored in memory. The display light(s)

will turn off.

gr/gal or ppm

The machine is now ready for use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water softener

Settings

1 - 30

gr/gal

1 - 30

ppm

CaCO

Settings

31 -60

gr/gal

31 -60

ppm

CaCO

19 *)

560

580

590

610

630

650

670

680

700

720

740

760

770

790

810

830

850

860

880

900

920

940

950

970

990

1010

1030

1040

1060

1080

110

130

140

160

180

200

220

230

250

270

290

310

320

340

360

380

400

410

430

450

470

490

500

520

540

*) factory setting

Download from Www.Somanuals.com. All Manuals Search And Download.

Water softener

Filling the salt reservoir

Only special, coarse-grained

reactivation salt* should be used in

this machine.

*Available from Miele. Please see

back page for more information.

Do not use other types of salt, e.g. table

salt, agricultural or gritting salt. These

could contain components which are

insoluble in water and could damage

the water softener. If in doubt, consult

Miele Technical Service.

^ Place the funnel provided in place.

The salt reservoir holds approximately

2.5 kg salt.

^ Carefully fill the reservoir with the

reactivation salt.

Some displaced water will run out - this

is normal.

,^{Inadvertently filling the salt}

reservoir with detergent will damage

the water softener.

Before filling the reservoir, make

sure that you are using reactivation

salt.

^ Wipe any residual salt off the screw

threads of the reservoir.

^ Screw the cap on securely.

^ Immediately after this step, start the

"Rinse" program, to remove any

traces of salt from the inside of the

machine.

^ Remove the bottom basket from the

machine.

^ Unscrew the salt reservoir cap.

Note: There may be a delay of a few

minutes before the "Rinse" program

starts due to the reactivation of the

water softener.

Before filling the salt reservoir for the

first time fill the reservoir with

approximately 2.5 liters of water, so

that the salt can dissolve properly.

Once the washer has been

operated, there will always be

enough water in the reservoir.

Download from Www.Somanuals.com. All Manuals Search And Download.

Water softener

Salt indicator

When the salt reservoir is empty, the

"Recharge Softener" indicator b lights

to remind you to fill the reservoir.

Reactivation takes place automatically

as needed during a program. The

"Recharging" indicator a lights while

this is occurring.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rinse Aid

Adding rinse aid

^ Open the washer door.

Rinse aid is not used in laboratory

glassware cleaning applications.

If rinse aid is required, the rinse aid

dosage must be activated with

assistance from Miele Technical

Service.

Rinse aid (e.g., MieleClear) is filled in

the storage container, and the selected

dose is then dispensed automatically.

The rinse aid reservoir holds

approximately 180 ml.

,^{Inadvertently filling the rinse aid}

reservoir with detergent will damage

the machine. Be sure only to use

rinse aid in the rinse aid reservoir.

^ Unscrew the reservoir cap.

^ Pour enough rinse aid into the

reservoir so that the level indicator

(see arrow) is dark. Use a funnel if

necessary.

^ Replace and tighten the reservoir

cap.

^ Wipe up any spilled rinse aid, to

prevent over sudsing during the next

wash cycle.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rinse Aid

Rinse aid indicator light

Setting the rinse aid dosage

The dosage selector has settings from

1 to 6 (1 - 6 ml). The factory setting is at

3 (3 ml).

^ Rinse aid does not need to be refilled

until the "Rinse aid" indicator light

comes on in the display.

If the glassware shows spots after

washing,

^ adjust to a higher setting.

If the glassware shows smearing or

cloudy streaks after washing,

^ adjust to a lower setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Neutralizing agent

Adding neutralizer

^ Open the door of the storage cabinet

that houses the neutralizer and

detergent dispensers.

Neutralizer has an acidic pH, and

works by neutralizing any traces of

(alkaline) cleaner from the surface of

the glassware.

When a mild alkaline detergent is

used for washing, select a

neutralizer that contains phosphoric

acid.

The neutralizer is automatically

dispensed during the second rinse

after the main wash cycle. To function

properly, the neutralizer container must

be filled and cleared of air (primed).

For specific instructions see

"Programming functions".

^ Take out the (red) neutralizer

container and refill it or replace it with

a filled container.

Note: the program "Inorganica"

dispenses neutralizer after the

pre-wash.

^ Insert the siphon tube into the

container opening and screw it into

place. Make sure to observe the

color coding.

Download from Www.Somanuals.com. All Manuals Search And Download.

Neutralizing agent

Neutralizer indicator light

^ When the "Neutralizer" indicator

comes on, it is important to promptly

refill or exchange the neutralizer

container.

Make sure to refill / exchange the

container before it becomes

completely empty.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

Adding detergent

Using powdered detergent

,^{Use only cleaning agents}

formulated for this machine. Do not

use detergents formulated for

household dishwashers.

When the following upper baskets

are used, powdered detergent can

be loaded inside the door, but only

for programs without a pre-wash

cycle. In all other cases, use liquid

detergent (DOS 1):

Liquid detergent

–

O 175/1

O 176/1

O 184

O 187

O 190/1.

It is recommended that mildly alkaline

liquid detergents be dispensed via the

optional DOS module.

Note

Before starting the program, load the

powdered detergent into the

compartment (except for the programs

"Rinse" and "Drain").

As a separate option, this machine can

also be fitted with a dispenser pump for

automatic liquid detergent dispensing

(DOS-Module G 60). This is connected

externally. Contact Miele for details.

The optional DOS Module G 60 is

supplied with its own installation and

connection instructions.

See "Programming functions" for

information on priming the dispensing

system and setting the dosage.

Note also that the program

"Organica" can only be used with

liquid detergents.

^ Press the button on the dispenser

cover. The cover will pop open.

The flap is always open at the end of a

program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

^ Load the detergent into the

compartment.

Dosage: To achieve a detergent

concentration of approximately 3 g/l,

use 30 g of detergent.

Always follow the detergent

manufacturer's recommendations for

dosage concentration.

^ Snap the cover closed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading the machine

Depending on the type of labware you

wish to clean, the washer can be used

with an upper basket, lower basket, or

injector wagon, as well as an

assortment of inserts and special

baskets to suit your needs.

After every program completion,

conduct the following visual

inspection:

– Inspect the labware for cleanliness.

– Has any hollowware been dislodged

from its proper position on the

nozzles?

Baskets and inserts should be

properly selected to match the

application desired.

,^{Any items that were dislodged}

from the adapters during a program

cycle must be washed again.

Before every program start, conduct

the following visual inspection:

– Are the cavities and channels in any

hollow vessels cleaned through?

– Is the labware properly loaded and

secured in the machine?

– Are the nozzles and connections

firmly attached to the

baskets/inserts?

– Are the hollow vessels properly

loaded so that all cavities and

channels will be flushed clean?

– Are the spray arms clean, and can

they rotate freely?

– Is the filter combination free of

coarse debris (remove any coarse

material and clean the coarse, fine,

flat, and micro-fine filters as

needed)?

– Is the basket adapter properly

connected to the water supply for the

spray arms and nozzles?

– Are the chemical dispensers filled?

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading the machine

Prepare items before loading

– Always load items in a way that all

surfaces are exposed. This ensures

that the items will be properly

cleaned.

^ Empty all glassware before loading

into the machine. Comply with all

applicable infection-control

regulations.

– Do not nest any items inside other

items. Keep each item separate.

^ Remove all agar residue from petri

dishes.

– Hollow vessels must be arranged for ^ Remove any blood clots and blood

complete inside exposure to the

cleaning water.

residue.

^ Remove all stoppers, corks, labels,

sealing wax residue, etc.

– Hollow vessels should be inverted

and placed in suitable baskets and

inserts so that water will have

,^{Ensure that no acid or solvent}

residues, especially hydrochloric

acid or chlorides, get inside the

machine.

unrestricted access and exit.

– Deep-based items should be

arranged at an angle, so that water

can run off easily.

Special preparations before

operating the machine

– Tall, narrow pieces should be placed

in the center of the basket for best

water coverage.

Items effected by heavy contamination

that resists removal, such as vacuum

grease, paper labels, etc., can affect

the cleaning and rinsing of the whole

load. Pre-treat these items before

– Baskets and inserts with an adapter

must be properly connected.

– The spray arms must not be blocked

by items that are too tall or hang

through the baskets.

Lab equipment that is contaminated by

microbiological material, pathogens,

propathogens, genetically altered

material, etc., may need to be sterilized

before being washed in the machine.

The user is responsible for this

decision.

– To avoid corrosion, only load

stainless steel instruments in good

condition.

– Do not use this machine to wash

nickel-plated items or discolored

(oxidized) aluminum items.

– Do not load plastics unless they are

heat-resistant.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading the machine

Spring adapter for the water

connection

Adjusting the upper basket

The upper basket can be adjusted

above and below the middle position,

by 2 cm.

The spring adapter for the water

connection must be properly engaged

when a basket or the injector wagon is

inserted into the machine. It must be

4 - 5 mm higher than the water inlet in

the machine.

Depending on the height selected and

which inserts are used, labware of

various heights can be arranged in the

baskets.

If this is not the case, the adapter

needs to be adjusted as follows:

To adjust the upper basket:

^ Pull the upper basket out as far as it

will go, lift it up off the runners and

remove.

^ Use a wrench to unscrew the roller

bearings on either side of the basket,

then reposition as required.

^ Loosen the locking ring a.

^ Move the adapter up to the proper

height b.

^ Tighten the locking ring c.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading the machine

Laboratory equipment

This section only covers basic

information on how to prepare and load

labware.

Wide-necked labware, e.g., beakers,

wide-necked Erlenmeyer flasks and

Petri dishes, or cylindrical items,

e.g., test tubes, can be cleaned inside

and out by the rotating spray arms.

For proper cleaning, load these items in

whole, half or quarter inserts, and place

them in an empty lower basket or upper

basket with spray arm.

– Petri dishes and similar items should

be loaded in a suitable insert with the

soiled side facing center.

– Pipettes should be placed with the

narrow end facing down.

– Protective netting can be used to

avoid glass breakage.

Narrow-necked items, e.g., narrow

necked Erlenmeyer flasks, round flasks, – Quarter baskets should be loaded at

volumetric flasks and pipettes, require

the use of injector wagons or injector

baskets.

least 3 cm away from the edge of the

wagon.

Separate instructions are included

for the use of injector baskets and

inserts for narrow-necked labware.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading the machine

Upper basket O 188

E 106

For various inserts.

Stainless steel half insert with 26 spring

hooks in 2 different heights for various

glassware, e.g. narrow necked flasks,

graduated cylinders, medicine bottles,

etc.

Lower basket U 874

For various inserts.

E 109

Stainless steel half insert to

accommodate 21 beakers up to 250 ml,

Erlenmeyer flasks, round flasks, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading the machine

E 350

Injector wagon

O 187

Injector wagon

For narrow necked glassware,

15 injectors, 160 mm high;

18 injectors, 220 mm high.

(Upper basket) For direct injection of

narrow necked glassware,

34 injectors,160 mm high.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Turning on

Selecting the (optional) drying

function

^ Close the door.

The additional function "Drying" can be

selected immediately after a program

has been selected (except for "Rinse"

and "Drain").

^ Press the "On/Off" button.

If the program selector is in the f

position, an indicator light will appear in

the display.

^ Press the "Drying" 0 button.

Starting a program

The drying program is timed to run for

10 min. The total program time is

extended accordingly.

^ Turn the program selector clockwise

or counterclockwise to the desired

program. Refer to the "Program

Guide" for more details.

^ Press the "Start" 6 button.

The display shows the "Main Wash 1"

temperature of the selected program

(except for "Rinse" and "Drain"). The

"Start" indicator flashes.

The display shows the current

temperature.

The "Start" indicator comes on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Once a program cycle has started, all

other programs are locked until

Program sequence display

Whenever a program is running, the

indicator light for that program remains

on.

completion. If the program selector is

turned to a different program, the

display goes out. The display will

re-appear if the program selector is

turned back to the running program.

Recharging

Pre-Wash 1 + 2

Wash 1 + 2 *

During a program, the "Display" ß

button can be used to toggle between

the:

Rinse 1 - 4 / Final rinse 1 + 2

Dry

– actual temperature

Complete

(Program parameter achieved)

– elapsed program time, and

– active wash block

(depending on model):

1 = Pre-rinse 1

2 = Pre-rinse 2

3 = Main wash 1

4 = Main wash 2

5 = Chemical Disinfection

6 = Interim rinse 1

7 = Interim rinse 2

8 = Interim rinse 3

9 = Interim rinse 4

10 = Final rinse 1

11 = Final rinse 2

12 = Drying

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

End of a program

Turning off

Once the "Start" indicator goes out, and ^ Press and release the "On/Off"

the "Complete" indicator comes on, the

program has ended. You will see a 0 in

the middle of the display, and all other

indicators will show a running light.

button.

Because of the electric door lock, the

door can only be opened if the "On/Off"

button is pressed (see "Opening and

closing the door").

A buzzer sounds for a maximum of

30 seconds by default.

To change the buzzer function, see

"Programming functions".

^ Use the "Display" button to view the

total running time or temperature of

the program.

Immediately after a program has

finished, partially open the door of the

machine for 10 to 15 mins. A good

drying result is achieved by the residual

heat.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use

Canceling a program

^ Turn the program selector to f.

Avoid canceling a running program

unless absolutely necessary, for

example if the labware is moving

around excessively or the wrong

program has been selected.

The program is canceled after

2 seconds.

^ Open the door.

,^{Caution! Water and items in the}

machine may be hot. There is a

danger of burning or scalding.

,^{In cases of officially recognized}

epidemics, contaminated water

must NEVER be drained from the

machine.

^ Rearrange the items securely. Wear

protective gloves as needed, and

comply with all applicable health and

safety regulations for infectious

disease control.

^ Replenish powder detergent if

necessary.

^ Close the door.

^ Start the "Drain" program.

The water will be drained away.

^ Select and start the program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Program guide

Program

Description

Open program available for programming by end user.

Custom

For removing inorganic residue;

generally for analytical applications, for light to moderate soiling, with moderate

to high rinse requirements.

INORGANICA

ORGANICA

STANDARD

UNIVERSAL

INTENSIVE

PLASTIC

For removing organic residue, such as oils, fats, wax, agar, preparation

applications and for some analytical applications with moderate to heavy soiling,

and moderate rinse requirements. Liquid detergent required, cold, warm, and a

DI water supply is recommended.

For a wide range of soiling types that do not denature or precipitate in alkaline

environments, for some preparation and analytical applications, for light soiling,

and low rinse requirements.

For removing organic residue (such as proteins, oils and some fats) and some

inorganic residues (pH 7, water-soluble metallic salts), for preparation

applications and for some analytical applications, moderate to heavy soiling and

moderate rinse requirements.

For removing organic residue (such as proteins, cell and tissue cultures, oils and

some fats) and some inorganic residues (pH 7, water-soluble metallic salts), for

preparation applications and analytical applications, moderate to heavy soiling,

and with moderate to high rinse requirements.

For temperature-sensitive labware, such as plastic bottles (minimum required

temperature resistance 55 °C), for preparation applications and for some

analytical applications, for light to moderate soiling, for moderate rinse

requirements.

To pump away water, for example when a program is canceled.

DRAIN

RINSE

varioTD

To rinse heavily soiled labware, e.g., to pre-treat heavy soiling, remove residue or

to avoid drying and encrusting before a full program is run.

For cleaning and thermal disinfection at 93 °C with 5 min holding time (as per

EN ISO 15883-1).

For cleaning and thermal disinfection at 93 °C with 10 min holding time (as per

¶18 of Germany's infectious disease control act, section A/B, fungicidal,

bactericidal, and virus-inactivating).

SPECIAL

93°C - 10'

CW = cold water, HW = hot water, DW = distilled water, °C = Temperature, min = holding time

* The DOS 2 rinse aid dosage must be activated through Miele Technical Service

Download from Www.Somanuals.com. All Manuals Search And Download.

Program guide

Program sequence

Rinse

Pre-Wash

Main Wash

Rinse

Final Rinse *

Drying

(X)

DOS 3

DOS 1

80°C

3 min

75°C

1 min

DOS 3

(X)

DOS 3

50°C

1 min

DOS 1

75°C

1 min

70°C

1 min

DOS 3

DOS 1

85°C 3

3 min

65°C

min

80°C

1 min

DOS 3

DOS 1

75°C

3 min

75°C

1 min

DOS 3

DOS 1

80°C

3 min

75°C

1 min

DOS 3

DOS 1

85°C

3 min

75°C

1 min

DOS 3

DOS 1

55°C

5 min

55°C

1 min

HW HW

DOS 3

(X)

DOS 1

55°C

5 min

93°C

5 min

HW HW

DOS 3

DOS 1

93°C

10 min

75°C

3 min

x = Additional function

DOS 1 = Detergent dosage from 40 °C

DOS 3 = Neutralizer dosage after water inflow

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

For future servicing, be sure to document any changes made to the factory

settings in the fields provided.

General information:

– Program selector positions that have no assigned function are represented by a

bar ( - ) in the middle of the display.

– To call up the programming level, use the f position.

The status E.. will appear in the display.

The following instructions apply to all programming functions:

To access the programming mode

^ Turn the program selector to f.

^ Turn off the machine.

^ Simultaneously press and hold the

"Display" ß and "Start" 6 buttons,

while turning on the machine by

pressing the On/Off button.

The current program status P..

appears in the display. The Fill/Drain

indicator lights.

Saving to memory and exiting the programming mode

^ Press the "Start" 6 button.

SP appears in the display.

^ Press the "Start" 6 button again.

The change will now be stored in the

memory.

Exiting the programming mode without saving

^ Press the On/Off button to turn off

the machine.

The change is canceled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

DOS 1 (liquid detergent)

Setting the detergent dosage

The dosage concentration only needs to be set for liquid detergents. Set the

concentration according to the detergent manufacturer's recommendations.

Do not change the setting if you are using powdered detergent in the door

dispenser.

Step

Display / Result

^ Press the "Drying" 0 button until E02

appears in the display.

E02

^ Turn the program selector to

"Inorganica".

Using door dispenser

Using DOS module

10 = 10 sec dosage length

1.00 = 1.0 % dosage concentration

^ Press or hold down the "Display" ß

button until the required value appears

in the display, e.g., 0.5.

0.50 The dosage time / dosage

concentration is now set.

Dosage concentration setting:

Priming the dosage system

The dosage system does not need to be primed (cleared of air) unless:

– the dosage concentration is being set for the first time,

– the liquid detergent container was inadvertently completely emptied .

Step

Display / Result

^ Press the "Drying" 0 button until E02 E02

appears in the display.

^ Turn the program selector to "Custom". d§1

^ Press the "Display" ß button.

The dosage system will be primed

automatically. Priming is complete

when 0 appears in the display.

^ Exit the programming mode.

Start "Rinse" program.

This will rinse away any agents that

entered the wash cabinet during

priming.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

DOS 3 (neutralizer)

Setting the neutralizer dosage

Set dosage concentration according to the neutralizer manufacturer's

recommendations.

Step

Display / Result

^ Press the "Drying" 0 button until E02

appears in the display.

E02

^ Turn the program selector to "Intensive". The programmed dosage

concentration appears in the

display, e.g., 0.10 = 0.10 %

^ Press and hold the "Display" ß button

until the required value appears in the

display, e.g., 0.2.

0.20 The dosage concentration is

now set.

Dosage concentration setting:

Priming the dosage system

The dosage system does not need to be primed (cleared of air) unless:

– the dosage concentration is being set for the first time,

– the neutralizer container was inadvertently completely emptied .

Step

Display / Result

^ Press the "Drying" 0 button until E02

appears in the display.

E02

^ Turn the program selector to "Universal". d§3

^ Press the "Display" ß button.

The dosage system will be primed

automatically. Priming is complete

when 0 appears in the display.

^ Exit the programming mode.

Start "Rinse" program.

This will rinse away any agents that

entered the wash cabinet during

priming.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Buzzer

The buzzer can be programmed for the following functions:

– a continuous tone at the end of a program,

– an error signal that beeps in 1-second intervals, and

– a sample-collection signal (allows a sample of the final rinse water to be

collected) that beeps in sets of 3 followed by a 2-sec pause. Contact Miele

Technical Service to program the sample-collection

signal.

The numbers shown in the display correspond to the following settings:

20 Buzzer off

21 End of program (factory setting)

22 Error

23 End of program + Error

24 Sample-collection signal

25 End of program + Sample-collection signal

26 Error + Sample-collection signal

27 All functions (End of program + Error + Sample-collection signal)

Step

Display / Result

^ Press the "Drying" 0 button until E04 appears in the E04

display.

^ Turn the program selector to "Inorganica".

^ Press and hold the "Display" ß button until the

required value appears in the display, e.g., 26.

Value selected:

The buzzer will sound for 30 sec during the selected setting.

To switch it off earlier:

– Turn the program selector to f.

– Press the "Display" ß button.

– Interrupt the power supply, e.g., open the door.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Changing program parameters

The wash programs can be adjusted to meet various technical requirements. For

example, the temperatures and cycle times for the program blocks Main Wash 1

and Main Wash 2, and Rinse 1 and Rinse 2, can be changed.

Consult the "Program guide" for a list of cycle temperatures and running times.

Be sure to document any changes made to a program, e.g., by making a note in

the corresponding column in the program guide.

Adjustable temperature range:

– 30 °C - 93 °C in all programs except "Rinse", "Drain" and "Special".

Adjustable holding time range:

– 1 - 15 min.

How to change the temperature

Step

Display / Result

^ Press and hold the 0 button until the level with the E09 for Main Wash 1

desired program block appears in the display.

E12 for Main Wash 2

E22 for Rinse 1

E25 for Rinse 2

^ Turn the program selector to the program you wish

to change, e. g., Custom.

°C ~65

^ Press and hold the ß button until the required value °C ~70

appears in the display, e.g., 70 °C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Changing the holding time

Step

Display / Result

E10 for Main Wash 1

E13 for Main Wash 2

E23 for Rinse 1

^ Press and hold the 0 button until the level

with the desired program block appears in the

display.

E26 for Rinse 2

^ Set the program selector to the program you min _ 1

wish to change, e. g., Custom.

^ Press and hold the ß button until the

required value appears in the display,

e.g., 10.

min _ 10

Restoring the factory settings

Step

Display / Result

^ Press and hold the 0 button until E33

appears in the display.

E33

^ Turn the program selector to a program.

Default factory setting(s):

Re-programmed setting(s):

^ When PP appears in the display, press the ß 00, the factory settings have

button.

been restored.

The water softener has been restored to the factory settings. Reprogramming is

required (see "Programming the water softener").

Program changes to the open programs "Custom", "Inorganica" and "Organica"

remain unchanged.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming functions

Setting the time and date

The date and time are set in the serial interface (optional accessory). This

information appears in the print log.

The date and time can be changed, e.g., from daylight saving to standard time.

Use the program selector to activate the desired time and date:

1 o'clock position: Calendar day 01 - 31

2 o'clock position: Month

3 o'clock position: Year

4 o'clock position: Hours

5 o'clock position: Minutes

01 - 12

00 - 99 = 2000 - 2099

00 - 23

00 - 59

When level E34 is selected without an activated serial interface, a "-" appears in

the display for all program selector positions.

Step

Display / Result

^ Press and hold the "Drying" 0 button until E34

appears in the display.

E34

Wait approximately 30 sec before the next step.

The control unit retrieves the

currently stored values.

^ Switch the program selector to the position for the 10

value you wish to change, e.g., to the 4 o'clock

position to set the hour.

^ Press and hold the "Display" ß button until the

required value appears in the display, e.g., 1 x.

11, the hour is changed.

Wait approximately 30 sec before turning off the

machine.

The updated values are

transmitted to the serial

interface.

Once the values are saved and you have exited the programming mode, the

updated values are transmitted to the interface. Therefore wait about 30

seconds before switching off the machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Data transfer (optional)

The machine is equipped with an

interface socket so that data can be

transferred from Novotronic to a log

printer.

During program operation a protocol is

prepared. It can be printed using an

external printer.

The protocol contains the following

Please contact Miele Technical Service information:

to order printer cables.

– date and device number

The serial interface is RS 232

compatible.

– program start time and name

– rinse blocks used

Various printer types with

Epson-compatible fonts can be used

for printing.

Miele Technical Service maintains a list

of recommended printers.

– dosage system with dosage

temperature and target dosage

amount

– target values for temperature and

holding times

Pin assignment 9-pin sub-D connector:

GND (ground)

TXD (send)

– minimal temperature during the

holding time

1-4-6 (bridge)

7-8 (CTS)

– all errors (e.g., water supply defect)

– program end time

,^{Printer initialization must only be}

performed by Miele. Consult

Technical Service using the contact

information on that back of this

manual.

– warnings, e.g., salt required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Periodic maintenance for the machine

is recommended annually.

Routine checks

The routine checks must be done daily

by the user before using the machine.

For the routine checks a checklist is

supplied with the washer.

Check the following points:

– the filters in the base of the wash

cabinet must be empty,

– the spray arms in the machine and at

the baskets should be clear,

– the wash cabinet and the door

gasket should be clear,

– the dispensing systems, and

– the baskets and inserts.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Cleaning the coarse filter

,^{Wear protective gloves and}

goggles when cleaning this

machine.

Cleaning the filters in the wash

cabinet

,^{The machine must not be used}

without all filters in place. The filters

protect the circulation pump from

damage caused by foreign objects.

The filter combination in the base of

the wash cabinet should be

inspected regularly and cleaned if

necessary.

^ Press the two tabs together, remove

and clean the coarse filter.

^ Put the clean filter back in position

and press until it clicks into place.

Watch out for sharp objects which

could cause injury e.g. glass

splinters.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Cleaning the fine, flat and micro-fine

filters

^ Remove the coarse filter.

^ Remove the fine filter from between

the flat and micro-fine filters.

^ Then remove together with the flat

filter.

^ Clean the filters.

^ Replace the filter combination in

reverse order. The flat filter must lie

flat in the base of the wash cabinet.

^ To unscrew the micro-fine filter,

grasp the two tabs and turn twice

counterclockwise.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Cleaning the spray arms

^ Unscrew the upper spray arm.

The spray arms can get clogged.

Check daily and clean if necessary.

^ Loosen the knurled nut of the lower

spray arm and remove.

^ Use a sharp pointed object to push

particles into the spray arm jets and

rinse thoroughly under running water.

Removing the spray arms

^ Remove the baskets.

Spray arm at the upper basket or

mobile unit (if available):

^ Refit the spray arms in reverse order

after cleaning.

^ Loosen the knurled nut and remove

the spray arm.

After replacing the spray arms

check that they can rotate freely.

Metal knurled nuts have a left-hand

thread. Ceramic knurled nuts have a

right-hand thread.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Cleaning the drain pump and

non-return valve

The drain pump is beneath the

non-return valve (see arrow).

If water has not been pumped away at

the end of a program the drain pump or

the non-return valve may be blocked.

^ Turn off the machine.

^ Remove the filter combination out of

the wash cabinet.

^ Before refitting the non-return valve,

check that the drain pump is not

blocked. Spin the propeller several

times in both directions to check for

obstructions.

^ Carefully refit the non-return valve

and secure it with the locking clamp.

Refit and lock the filter in place.

^ Tilt the locking clamp to the side.

^ Pull out the non-return valve and

rinse well under running water.

For safety the load should be

washed again.

,^{Use proper eye protection when}

removing the non-return valve.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Cleaning the water inlet filters

Cleaning the filters

To protect the water inlet faucet, filters

are incorporated in the intake hose

attached to the water supply. If the

filters are soiled they must be cleaned

to ensure sufficient water intake to the

wash cabinet.

^ Disconnect the machine from

electricity (unplug it or "trip" the

circuit breaker).

,^{The plastic housing of the water}

connection contains electrical

components and should not be

submerged or run through water.

^ Close the water supply and unscrew

the water inlet faucet.

^ Carefully remove the rubber seal.

^ Take out the filters with needle nose

pliers.

^ Rinse the large area filter 1 and fine

filter 2 under running water, and

replace if necessary.

^ Return filters and seal. Make sure

they are seated correctly.

^ Reconnect the hose to the water

faucet, checking that it is not

cross-threaded.

^ Open the water supply.

^ Check for leaks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Cleaning the control panel

,^{Never clean the machine or near}

its vicinity with a water or high

pressure hose.

^ The control panel should only be

cleaned with a damp cloth or a

suitable cleaner for use on plastic

materials.

Cleaning the wash cabinet

,^{Do not use abrasive cleaners,}

glass cleaners or all-purpose

cleaners! They will damage the

control panel.

The wash cabinet is mostly self

cleaning.

If deposits have built, contact Miele for

info.

Cleaning the exterior

Cleaning the door seal

^ Stainless steel surfaces can be

cleaned using a non-abrasive

stainless steel cleaner or

dishwashing detergent and warm

water.

Clean the door seal regularly with a

damp cloth to remove soiling.

To replace damaged or leaking door

seals please contact Miele's Technical

Service Dept.

^ To help prevent resoiling, a

conditioner for stainless steel can

also be used. Apply sparingly with

even pressure.

Dispensing systems

Check the consumption of the used

chemicals regularly to notice any

irregularities of the dispensing.

,^{Do not use cleaners containing}

thinner or ammonia. They will

damage the surface.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and Care

Baskets and inserts

If available:

To ensure the function of baskets and

inserts, they must be checked daily. A

checklist is supplied with the machine.

– do the spray arms rotate freely?

– Are the spray jets clogged? See

"Cleaning and Care - Cleaning the

spray arms"?

Check the following points:

– Are the rollers in the proper condition

and are they securely fixed in the

mobile unit/insert?

– Is the basket connection set to the

correct height and tightened?

– Are all spray jets, spray sleeves and

hose adapters tightly connected to

the basket/insert?

– Are all spray jets, spray sleeves and

hose adapters, unclogged so that

the wash water can flow through?

– Are covers and fasteners tightly

screwed on the spray sleeves?

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

The following guide can be used to help address minor problems without a

service call.

,^{Repairs should only be performed by Miele Technical Service. Work}

performed by unqualified persons can place the user at considerable risk of

harm.

To help avoid unnecessary service calls, please be sure to check first whether an

error message is due to operator error.

To do so:

^ Turn the program selector to f. The error message is erased.

^ Press the On/Off button to switch off the machine.

^ Turn the machine back on and re-start the program.

^ If the error occurs again and cannot be corrected, contact Miele Technical

Service for assistance.

^ You will need to provide the error code ( "F...") .

What if...

Possible fault

Solution

The washer will not

start.

The door is not properly

closed.

Close the door firmly.

The machine is not

plugged in.

Plug in the power cord.

The fuses are defective or Make sure the breaker has

the circuit breaker has

tripped.

not tripped.

The washer is not turned Press the On/Off button

on. and select a program.

The program does not Error message: F 04 - F Contact Miele Technical

continue.

17, F 20 - F 26, F 28 -

F - -

Service.

Fault code F 31 - 33

Dosing system faulty.

Contact Miele Technical

Service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

Before the start of a

program, the "8

Dosing Pump"

indicator flashes, and

the program can not be

started.

Before addressing the

error:

– Turn the program

selector to f. The error

message is erased.

– Press the On/Off button

to switch off the

machine.

Error message: Fdo:

Refill or replace the liquid

detergent container.

The liquid detergent

container is empty.

Then:

– Switch the washer on.

– Restart the program.

A few minutes after the

start of a program, the

"8 Dosing Pump"

indicator flashes, and

the program stops.

Before addressing the

error:

– Turn the program

selector to f. The error

message is erased.

– Press the On/Off button

to switch off the

machine.

Error message: Fdo:

Refill or replace the liquid

detergent container.

There is a problem

dispensing the liquid

detergent.

Prime the dosage system

(see "Programming

functions").

Then:

– Turn the washer on.

– Restart the program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

Before the start of a

program, the

Before addressing the

error:

"Neutralizer" indicator

flashes, and the

program can not be

started.

– Turn the program

selector to f. The error

message is erased.

– Press the On/Off button

to switch off the

machine.

Error message: Fdo:

Refill or replace the

neutralizer container.

The neutralizer container is

empty.

Then:

– Switch the washer on.

– Restart the program.

A few minutes after the

start of a program, the

"Neutralizer" indicator

flashes, and the

Before addressing the

error:

– Turn the program

selector to f. The error

message is erased.

program stops.

– Press the On/Off button

to switch off the

machine.

Error message: Fdo:

Refill or replace the

neutralizer container.

There is a problem

dispensing the neutralizer. Prime the dosage system

(see "Programming

functions").

Then:

– Turn the washer on.

– Restart the program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

The "Recharge"

indicator flashes.

The water softener has run Refill the salt reservoir.

out of salt.

A few minutes after the

start of a program, the

"Fill/Drain" indicator

flashes, and the

Before addressing the

error:

– Turn the program

selector to f. The error

message is erased.

program stops.

– Press the On/Off button

to switch off the

machine.

Error message: F..E:

– Open the water valve

completely.

There is a problem with the

water intake.

– Clean the water inlet

filters.

– The flow pressure at the

water connection is too

low. Contact a qualified

plumber for advice.

Then:

– Turn the washer on.

– Restart the program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

The rinse program is

interrupted and the

"Fill/Drain" indicator

light is flashing.

Before addressing the

error:

– Turn the program

selector to f. The error

message is erased.

– Press the On/Off button

to switch off the

machine.

Error message: F..A:

– Clean the filter

combination in the wash

cabinet.

There is a problem with the

water out take.

– Clean the drain pump.

– Clean the non-return

valve.

– Remove any kinks in the

drain hose.

Then:

– Turn the washer on.

– Drain the water.

– Restart the program.

The water in the wash Error message: F01 - F03, – Clean the filter

cabinet does not get F18, F19, F27 combination in the wash

hot; the program

sequence lasts too

long.

cabinet.

The washer is equipped with

a temperature sensor that

switches off the heater when

it begins to overheat.

Overheating can occur

when, e.g., large items

cover the heating elements,

or when the filters in the

wash cabinet are blocked.

– Rearrange the

glassware.

– Reset the Thermo

switch. See "Frequently

asked questions -

Thermo switch".

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

After a program, there is The dispenser was wet

Make sure the dispenser is

dry before loading it.

powdered detergent

residue left behind in

the door dispenser.

when it was loaded.

The powdered detergent Always arrange glassware

dispenser cover was

blocked by glassware.

so the dispenser cover can

open.

The powdered detergent Detergent residue is

dispenser cover will not blocking the latch.

close.

Wipe away any detergent

residue.

A banging noise can be A spray arm is hitting the Interrupt the program and

heard in the wash

cabinet.

glassware.

re-arrange any glassware

that it blocking the wash

arm, (see "interrupting a

program").

A rattling noise can be Glassware is moving

heard in the wash

cabinet.

Interrupt the program and

re-arrange any glassware

that is loose, (see

"interrupting a

around in the wash

cabinet.

program").

A banging noise is This may be caused by the Consult a qualified

coming from the water installation or the diameter plumber for advice.

pipes.

of the pipes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

Items made of glass

show signs of

corrosion.

The items are not

washer-safe.

Only use washer-safe

glassware.

No neutralization took

place in the program

sequence.

Fill the neutralizer

container.

Excessively high Select an appropriate

temperatures are causing program or lower the wash

glass corrosion.

temperature.

Too alkaline detergent is

causing glass corrosion.

Choose a milder detergent

or lower the DOS1

concentration.

Items made of stainless The chloride content of the Test your water

steel show signs of

corrosion.

water is too high.

composition. If needed,

condition the water

externally and use DI

water.

The screw cap on the

Properly thread the cap

reactivation salt reservoir is and screw it tightly.

not tightened.

No neutralization took

place in the program

sequence.

Fill the neutralizer

container.

Rust articles or a rust film – Check the piping.

appears in the wash

cabinet, due to:

– Remove all rusty items

from use.

– excessive iron content in

the water, or

– rusty items in the

washer.

The grade of stainless

steel is not washer-safe.

Only use high grade

stainless steel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

There are white

deposits and/or spots

on the labware.

The water softener setting Test the tap water

is too low.

hardness and program the

water softener according.

Too much powder

detergent is being used.

Be sure you are using the

correct amount of

detergent.

The neutralizer is not

dispensing properly.

Check the neutralizer

dispenser.

There is no reactivation

salt in the reservoir.

Carefully fill the reservoir

with the reactivation salt.

The screw cap on the

Properly thread the cap

reactivation salt reservoir is and screw it tightly.

not tightened.

The rinse water quality was – Use water with a lower

insufficient.

conductivity.

– If the washer is

connected to a

demineralizing

cartridge, check the

status and change as

needed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

What if...

Possible fault

Solution

The wash result is

unacceptable.

The baskets and inserts Properly arrange the

were incorrectly loaded or glassware.

overcrowded.

Do not overload baskets

and inserts.

The program used was not Select an appropriate

suited to the type/amount program or modify the

of soiling.

program.

The detergent used was

not suited to the

type/amount of soiling.

Use a suitable detergent

for machine washing.

The labware was left soiled Do not leave soiled

for too long.

labware unwashed for

more than 6 hours.

A spray arm is blocked.

Arrange the items do not

block the spray arms.

Jets are blocked in the

spray arms or inserts.

Check the spray jets and

clean as needed.

The basket or insert is not Use the adapter to

properly connected to the properly connect the water

water supply.

supply to the basket or

insert.

Download from Www.Somanuals.com. All Manuals Search And Download.

Frequently asked questions

Thermo switch

This machine has a resettable heater

limiter which will shut off the elements in

the event of over-heating. This could be

caused for example, if large articles

cover the heating elements or if the

filters in the wash cabinet are blocked.

If the following fault shows: F01 - F03,

F18, F19, F27 (Water in the wash

cabinet is not heated, the program

cycle takes too long). Please proceed

as follows.

^ Remove the cause of the problem.

^ Remove the service plinth.

^ Press the reset button on the

temperature sensor on the right side.

If this switch trips repeatedly,

contact the Miele Technical Service

Department.

Download from Www.Somanuals.com. All Manuals Search And Download.

After Sales Service

In the event of a fault which you cannot

correct yourself please contact the

Miele Technical Service Department

1-800-991-9380

[email protected]

1-800-565-6435

[email protected]

^ Please quote the model of your

machine. This information can be

found on the machine’s front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Please refer to the installation

diagram included with the machine.

Undercounter installation

To install the machine under a

continuous countertop, the machine lid

must be removed, as follows:

,^{Furniture and fittings installed}

near the machine must be of a

commercial standard, able to

withstand the effects of steam.

^ Open the door.

The machine must be in a stable and

level horizontal position.

Use the front screw feet to compensate

for unevenness in the floor, or to adjust

the height of the machine.

Installation options:

– Free-standing

– Slide-in:

Next to other machines or furniture,

or in a suitable space. The space

must be at least 23 ⁵/₈" (60 cm) wide

and 23 ⁵/₈" (60 cm) deep.

^ Remove the set screws with a

Phillips-head screwdriver.

^ Pull the machine lid forward approx.

1/4" (5 mm) lift it upwards and

remove.

– Undercounter:

The washer can be installed under a

continuous countertop or sink

drainer.

The recess must be at least 23 ⁵/₈"

(60 cm) wide, 23 ⁵/₈" (60 cm) deep

and 32 ⁵/₁₆" (82 cm) high.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Positioning and securing the

machine

Protecting the countertop

Important for machines with steam

To ensure stability the washer must first condenser (depending on model):

be aligned and then secured to the

To prevent steam damage to the

countertop.

countertop, adhere the protective foil

^ Open the door.

9 ¹³/₁₆" x 22 ¹³/₁₆" (25 x 58 cm)

underneath the countertop near the

steam condenser.

^ Screw the washer to the countertop

through the left and right holes in the

front trim.

Depending on the requirements for

installation, the following kit can be

ordered from the Miele Technical

Service Department.

Do not use silicone sealant to seal

the gaps between the machine and

any neighboring cabinets/

appliances. This will block

ventilation to the circulation pump.

Cover plate (protects the countertop)

The underside of the countertop is

protected from steam damage by a

stainless steel plate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Electrical connection

WARNING

THIS APPLIANCE MUST BE

GROUNDED

,^{All electrical work must be}

carried out by a suitably qualified

electrician in accordance with local

and national safety regulations.

Grounding connection

– Connection should be made via a

suitable isolator, with an on-off switch

that is easily accessible for servicing

work.

^ The ground lead must be connected

to the screw connection point

(marked with the ground symbol 8) at

the back of the machine.

– The electrical connection is made

through a receptacle according to

national requirements. The

The machine must only be operated

with the voltage, frequency and

fusing shown on the data plate

located on the rear of the machine,

and on the plinth (behind the service

panel).

receptacle has to be easily

accessible after installation.

– To increase the security it is

recommended to install a protective

switch (30 mA) before the machine.

The conversion diagram and the wiring

diagram is secured to the inner side of

the service panel.

– For technical data see the data plate

or wiring diagram supplied.

The machine must only be operated

with the voltage, frequency and fusing

shown on the data plate.

The machine can be converted

according to the supplied converting

diagram and wiring diagram.

The data plate is located at the rear of

the machine and behind the plinth on

the plastic cover.

The wiring diagram is supplied with the

machine.