Operating and installation instructions
Oven
H 5681 BP, H 5688 BP
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 652 780
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Oven controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
System lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Vented oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Door lock for pyrolytic operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Energy saving features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
User instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Moisture plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
"Moisture plus" recipe booklet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PerfectClean treated surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pyrolytic cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Energy efficiency rating according to EN 50304. . . . . . . . . . . . . . . . . . . . . . . . . . 17
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Baking tray, universal tray and rack with non-tip notches . . . . . . . . . . . . . . . . 17
FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Fitting the FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Changing the position of the FlexiClip telescopic runners . . . . . . . . . . . . . . . 19
Food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Opener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Descaling tablets, plastic tube with clip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Anti-splash insert (depending on model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Handle (depending on model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Miele{home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Information is displayed via:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
The home of the future . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To enter basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning and heating up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Automatic programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Manual operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
More about manual operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To select a function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To change the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Entering the Duration, a Start time or Finish time . . . . . . . . . . . . . . . . . . . . . . . . . 33
To use Automatic switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Delaying the start with Automatic switch-off. . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Sequence of the cooking programme when using Automatic switch-off. . . . . 34
Changing or deleting an entered cooking time . . . . . . . . . . . . . . . . . . . . . . . . 35
Changing the heating-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Pre-heating the oven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Activating moisture reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Change function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
User programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The User programmes menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To create a User programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
To call up an existing User programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Moisture plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Automatic programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Night baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Moisture plus d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Number of bursts of steam and when they are injected. . . . . . . . . . . . . . . . . . 42
Using Moisture plus d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
To evaporate residual moisture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
The residual moisture evaporation process . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
To start the residual moisture evaporation process . . . . . . . . . . . . . . . . . . . . . 44
To cancel the residual moisture evaporation process . . . . . . . . . . . . . . . . . . . 45
Descaling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Minute minder (egg timer) N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Clock format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
To set the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Catalyser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Cooling fan run-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Pyrolytic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Heating-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Recommended temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Buzzer tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
System lock 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
In operation lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Appliance front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Baking tray, universal tray, anti-splash insert (if applicable) . . . . . . . . . . . . . . 56
Rack, runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Lubricating the FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . . . . . . 57
PerfectClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Oven interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
To remove the oven door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
To dismantle the oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
To refit the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
To remove the FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
To remove the side runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
To lower the top heat/grill element. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Descaling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
When to run the descaling programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Descaling process (overview) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Start the descaling process.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Building-in diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Appliance and niche dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Front dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Installing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This appliance is not intended for
~
This appliance conforms to current
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
experience and knowledge, unless they
are supervised whilst using it, or have
been shown how to use it correctly by a
person responsible for their safety.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important notes on
installation, safety, use and
maintenance.
Safety with children
This appliance is not a toy! To
~
prevent the risk of injury or damage do
not let children play with the appliance
or its controls.
Keep these instructions in a safe
place and ensure that new users are
familiar with the contents. Pass them
on to any future owner.
Older children may only use the
~
oven when its operation has been
clearly explained to them and they are
able to use it safely, recognising the
dangers of misuse.
Correct application
Great care should be taken to
This oven is not designed for
~
~
ensure that children do not touch the
appliance when it is being used.
Children's skin is far more sensitive to
high temperatures than that of adults.
External parts of the oven such as the
door glass, control panel and the vent
become quite hot.
commercial use. It is intended for use in
domestic households and for use in
similar working and residential
environments such as:
– Shops
– Offices and showrooms
The oven door gets much hotter
~
during pyrolytic operation than during
normal use.
and by residents in establishments
such as:
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
– Hostels and guest houses
It is intended for domestic use only
~
to cook food, and in particular to bake,
roast, grill, defrost and dry food.
Any other use is not supported by the
manufacturer and could be dangerous.
Miele cannot be held liable for damage
resulting from incorrect or improper use
or operation of the appliance.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Before connecting the appliance,
~
make sure that the connection data on
Installation, maintenance and
~
the data plate (voltage and connected
load) match the mains electricity
supply.
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a competent person
if in doubt.
Do not connect the appliance to the
~
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
Before installation, check the
~
appliance for visible signs of damage.
Do not install and use a damaged
appliance. A damaged appliance could
be dangerous.
For safety reasons, this appliance
~
may only be used when it has been
The electrical safety of this
~
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system. It is
most important that this basic safety
requirement is present and tested
built in.
Never open the housing of the
~
appliance.
Tampering with electrical connections
regularly, and where there is any doubt or components and mechanical parts is
the household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
highly dangerous to the user and can
cause operational faults.
While the appliance is under
~
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
During installation, maintenance and Correct use
~
repair work, the appliance must be
disconnected from the mains electricity
supply. It is only completely isolated
from the electricity supply when:
Caution. Danger of burning.
High temperatures are produced by
the oven.
– the mains fuse is disconnected,
Use oven gloves when placing food
~
in the oven, turning or removing it and
when adjusting oven shelves etc. in a
hot oven. Be very careful that you do
not burn yourself on the top heating /
grill element.
– the screw-out fuse is removed (in
countries where this is applicable),
– it is switched off at the isolator.
Ensure that current is not supplied to
the appliance until after maintenance
or repair work has been carried out.
Never leave the appliance
~
unattended when cooking with oil or
fats, as these are a fire hazard if
allowed to overheat.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
Do not exceed the recommended
~
grilling times when using the "Full grill",
"Economy grill" and "Fan grill" functions.
Excessively long grilling times can lead
to food drying out and burning, or could
even cause it to catch fire.
If the supply cord is damaged, it
~
must be replaced by a Miele approved
service technician to avoid a hazard.
Do not use the "Full grill", "Economy
~
grill" or "Fan grill" to finish baking
par-cooked rolls or bread or to dry
flowers or herbs. Fire hazard.
Use "Fan plus" or "Conventional heat"
instead.
This appliance may only be used in
~
mobile installations such as ships,
caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
If using alcohol in your recipes, high If using a tray made by a different
~
temperatures can cause the alcohol to
vaporise and even to ignite on the hot
heating elements.
manufacturer, make sure that there is a
gap of at least 6 cm between the
bottom of the tray and the floor of the
oven.
Alcohol should be burnt off before the
dish is placed in the oven to avoid this
danger.
Never add cold water to food on a
~
hot universal tray, baking tray or
Cover any food which is left in the
directly onto food in a hot oven. The
~
oven to be kept hot. Any moisture in the steam created could cause serious
food could lead to corrosion damage in burns or scalding and the sudden
the oven. This also prevents the food
from drying out.
change in temperature can damage the
enamel.
If you wish to complete a cooking
Always ensure that food is suitably
~
cooked or reheated.
~
process using the residual heat in the
oven, leave the oven at the function
selected and select the lowest
Some foods may contain
micro-organisms which are only
destroyed by thorough cooking at
temperatures over 70 °C for a minimum
temperature for that function. Do not
switch the appliance off until the food
has been removed. Increased moisture of 10 minutes. Therefore when cooking
in the oven could cause condensation
to form which could lead to
or reheating foods, e.g. poultry, it is
particularly important that food is fully
cooked through. If in doubt select a
longer cooking or reheating time.
It is important that the heat is allowed to
spread evenly throughout the food
being cooked. This can be achieved
by stirring and/or turning the food
during cooking.
– corrosion in the oven compartment.
– damage to the control panel, worktop
and surrounding kitchen furniture.
Do not line the floor of the oven with
~
aluminium foil when using
"Conventional"/ "Bottom heat" /
"Intensive bake".
If using plastic containers for
~
This would cause a build-up of heat
which could cause damage to the floor
of the oven.
cooking, they must be declared by the
manufacturer as being suitable for use
in an oven. Other types of plastic
containers melt at high temperatures,
and could damage the oven.
For this reason do not place a dish, tin
or baking tray directly on the oven floor.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not heat up unopened tins or jars
~
of food in the oven. Pressure can build
Remove all accessories as well as
~
the runners and any extra accessories
such as Flexi-Clip runners from the
oven interior before starting the
pyrolytic cleaning process. The high
temperatures needed for pyrolysis will
damage the accessories.
up and they may explode, resulting in
injury or damage.
Do not push pots and pans around
~
on the oven floor, as this could damage
the surface.
Only use the Miele food probe
~
supplied with this oven.
Do not lean or sit on an open oven
~
door, or place heavy items on it. Make
sure that nothing gets trapped between
the door and the oven compartment.
This could damage the oven.
If a replacement is necessary it can be
obtained from the Miele Spare Parts
Department or your Miele dealer.
The oven door can support a maximum
load of 15 kg.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and safety instructions.
Do not use the appliance to heat up
~
the room. Due to the high temperatures
radiated, objects near the appliance
could catch fire.
Accessories
Only use genuine Miele spare parts
~
and accessories with this appliance. If
spare parts or accessories from other
manufacturers are used, this will
invalidate the guarantee, and Miele
cannot accept liability.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposing of your old
appliance
The transport and protective packing
Electrical and electronic appliances
has been selected from materials which often contain materials which, if
are envoronmentally friendly for
disposal, and should be recycled.
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not dispose of it with your
household waste.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
H 5681 BP, H 5688 BP
aControl panel
bDoor lock for pyrolytic operation
cTop heat / grill element with receiver for the wireless food probe
dSteam inlets for Moisture plus
eBack panel with air inlet for the fan
fSide runners with five shelf levels
gWater intake tube for the steam injection system
hWireless food probe holder
iDoor
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Oven controls
Cooling system
In addition to operating the various
cooking programmes to bake, roast
and grill, the controls also offer the
following:
A cooling fan will come on
automatically when a cooking
programme is started. The cooling fan
mixes hot air from the oven cavity with
cool room air before venting it out into
the kitchen through vents located
between the appliance door and the
control panel.
– a time of day display,
– a minute minder,
– a timer for programming cooking
durations,
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
– user programmes,
– automatic programmes,
– settings that can be customised.
Vented oven door
Auto sensor
The oven door is an open system and
some of the door panes have a
heat-reflecting coating. During
operation, cool air is passed through
the oven door to keep the outer pane
cool.
This sensor controls
– the cooking duration of the automatic
programmes. This will be indicated in
the display.
– the cooling fan run-on time.
If necessary, the oven door can be
dismantled for cleaning.
– the duration of the pyrolytic cleaning
process.
Door lock for pyrolytic operation
Safety features
For safety reasons the door locks as
soon as the pyrolytic cleaning
System lock
programme starts. After the pyrolytic
programme has finished, the door will
remain locked until the temperature in
the oven has dropped below 280°C.
The system lock 0 prevents the oven
from being used unintentionally by
children, for example. See "Settings -
Safety".
Safety switch-off
Safety switch-off is triggered
automatically if the oven is operated for
an unusually long period of time. The
period of time will depend on the oven
function selected.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Energy saving features
Energy save mode
The oven switches off automatically to
save energy if, at the end of an Auto-
matic programme or a cooking
Lighting
The oven lighting is set to switch off
15 seconds after the start of a cooking
programme (default setting). See
"Settings - Lighting".
programme with Automatic switch-off,
no other cooking function is selected
within a certain time period.
This time period depends on the
settings selected (cooking function,
temperature, cooking duration).
Door contact switch
If the oven door is opened during
operation, the door contact switch
automatically switches off the heating
elements and the fan, if a "Fan" setting
is being used. This helps reduce the
amount of heat lost from the oven
interior, e.g. when basting roast meat.
At the same time, the oven lighting is
switched on.
Either the time of day is displayed or
the display is dark: see "Settings - Time
- Display".
Using residual heat
The oven heating switches off
automatically shortly before the end of
a cooking programme where the
cooking duration has been
programmed or the food probe is being
used.
The residual heat in the oven is
sufficient to complete the cooking
process.
"Energy save" will appear in the display.
The cooling fan continues to run, as
does the hot air fan if a "Fan" setting
has been chosen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
User instructions
PerfectClean treated surfaces
The User instructions supplied with
your appliance in addition to these
Operating and installation instructions
contains detailed information about the
following:
The following surfaces are all treated
with a special PerfectClean finish:
– Side runners,
– Baking tray,
– Universal tray,
– Rack
– Automatic programmes
– Food probe
PerfectClean surfaces have very good
anti-stick properties and are much
easier to keep clean than conventional
enamel, if cleaned regularly.
– Baking
– Roasting
– Slow cooking
– Grilling
The FlexiClip telescopic runners also
have a PerfectClean finish.
– Defrosting
– Cooking ready meals
– Automatic programme recipes
PerfectClean surfaces have an
iridescent appearance.
Moisture plus
See "Cleaning and care" for more
information.
This function injects moisture during the
cooking process, giving excellent
results when cooking various types of
food, such as bread or meat.
Pyrolytic cleaning
The oven interior can be kept clean by
using the Pyrolytic function.
Moisture plus is activated during some
Automatic programmes, and can also
be used as a separate function for
manually injecting bursts of steam.
During the pyrolytic process the oven is
heated to over 400 °C. Any residual
soiling is broken down and reduced to
ash by the high temperatures.
"Moisture plus" recipe booklet
See "Cleaning and care" for more
information.
This separate booklet supplied with
your oven in addition to these
Operating and installation instructions
contains recipes and information on
using Automatic programmes with
Moisture plus and the Moisture plus
function.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Energy efficiency rating
according to EN 50304
Baking tray, universal tray and rack
with non-tip notches
This appliance is rated energy
efficiency class A in accordance with
EN 50304.
Tests were carried out using "Fan
plus U" with the FlexiClip telescopic
runners removed. The catalyser should
be switched off during testing, see
"Settings - Catalyser - Off next
programme only".
The baking tray, universal tray and rack
are inserted into the oven between the
two rails of a shelf runner.
Accessories
The following accessories are supplied
with this oven.
The trays and rack have non-tip safety
notches in the middle which prevent
them being pulled right out when they
only need to be partially pulled out.
The trays and rack can then only be
taken out of the oven by raising them
upwards and then pulling them out.
These and other accessories are also
available to order from the Miele Spare
Parts Department, your Dealer or via
If you are using a tray with the rack on
top, insert the tray between the rails of
a shelf runner and the rack will sit on
top of it.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
FlexiClip telescopic runners
Fitting the FlexiClip telescopic runners
Make sure that the oven has cooled
down before moving the FlexiClip
runners.
Take care not to burn yourself on
them.
The FlexiClip runners are fitted in between
the two rails that make up a shelf level.
The telescopic runner with the Miele
logo is fitted on the right.
The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners and pulled out of the oven to
their fullest extent.
When fitting the FlexiClip runners do
Push the telescopic runners right in
before placing a tray or rack on
them.
not extend them.
To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.
^ Fit the FlexiClip runner in between the
two rails at the front (1) and then push
it into the oven compartment (2).
^ Then secure the FlexiClip runner to
the bottom of the two rails as
illustrated (3).
The Flexi-clip runners can can support
a maximum load of 15 kg.
If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Changing the position of the
FlexiClip telescopic runners
Food probe
Make sure that the oven has cooled
down before moving the FlexiClip
runners.
This appliance is supplied with a
wireless food probe.
Take care not to burn yourself on
them.
The food probe is stored in a holder in
the door when not in use.
To change the position of the FlexiClip
runners:
Replace the probe in its holder after
each use. Make sure that it is
inserted into the holder correctly as
otherwise it could be damaged
when the door is closed.
Please refer to the separate "User
instructions" booklet supplied with the
oven for information on how to use the
food probe.
^ Remove the FlexiClip runners from
their original position by raising them
at the front, then pulling them
forwards and out.
Opener
^ Refit them on the required shelf level;
see "Fitting the FlexiClip telescopic
runners".
This opener is used to remove the lamp
covers in the sides of the oven.
Descaling tablets, plastic tube with
clip
These are required for descaling the
appliance.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Anti-splash insert (depending on
model)
The anti-splash insert should be placed
in the universal tray when grilling or
roasting.
The juices from the food being cooked
collect under the anti-splash insert. This
prevents them from spitting and making
the oven dirty. The juices can then be
used for making gravy and sauces.
Handle (depending on model)
The handle makes it easier to take the
universal tray, baking tray and rack out
of the oven, or to put them into it. The
two prongs at the top go inside the tray
or above the rack, and the U-shaped
supports underneath.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Miele{home
Miele|home communication enabled appliances use the household electrical
network c to communicate information about their operational status and the
progress of the programme to a master appliance d / e.
These instructions are for a
Optional accessories
communication enabled oven b that
can be linked into the Miele|home
system via a commucation module a
(optional accessory).
– Required: Communication module
XKM 2000 SV a
– Optional: Mobile InfoControl XIC
2100 e unit
Information is displayed via:
Both of these are supplied with their
own installation and operating
instructions.
– SuperVision appliance d
The status of other communication
enabled appliances in the system
can be shown in the display of the
SuperVision appliance.
The home of the future
The Miele{home system is capable of
expansion. In the future,
– InfoControl XIC 2100 e
Information transmitted from
communication enabled appliances b
will be able to be operated via a PC or
a mobile phone.
communication enabled appliances
can be received accoustically and
optically by a mobile InfoControl unit
in the vicinity of the house.
Further information
You can use both the SuperVision
appliance and the InfoControl unit at
the same time.
For further information about
Miele|home, SuperVision and other
options planned for the future please
contact your Miele dealer.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
The appliance is operated via the display a and the electronic sensors next to
and below the display. These react to finger contact. A keypad tone will sound
each time a sensor is touched. The volume of the keypad tone can be adjusted or
switched off altogether (see "Settings - Volume - Keypad tone").
Sensors
Meaning
b
c
C
Sensors
When the appliance is switched on, the allocations for these sensors
appear in the display.
Sensors which can be used in a programme are lit up.
0–9 Numerical keypad
This lights up if there is the option to enter a temperature or cooking
duration.
d
e
f
K
U
N
ON/OFF sensor
For switching the appliance on and off.
Clear sensor
To delete the latest entry.
Minute minder (egg timer) sensor
For entering a time for the minute minder, e.g. for boiling eggs.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Display
Main menu
All information about functions,
temperature, cooking durations, Auto-
matic programmes and settings is
shown in the display.
ß Fan plus
ß Conventional heat
ß Full grill
After the appliance has been switched
on by touching the K sensor, the Main
menu appears in the display with a list
of options available:
ß Pyrolytic
ß Defrost
ß Lighting
ß Economy grill
ß Fan heat
An option ! is selected by touching the
illuminated sensor C next to the
option required.
ß Moisture plus
ß Intensive bake
ß Top heat
ß Auto roast
ß Fan grill
ß Bottom heat
ß Descaling
ß Automatic
ß Slow cooking
ß User programmes
ß Settings J
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Symbols
The following symbols will appear in the display in addition to the text:
Symbol Meaning
!
Appears beside an option and is allocated to a sensor C. You select
the option you want by touching the sensor beside the dot.
A maximum of 3 options can be shown in the display.
These arrows indicate if more than three options are available.
You can scroll up % or down ( the list by touching the appropriate
sensor.
p
ZZZZZZZ The end of a list is indicated by a dotted line. By scrolling down further,
you reach the beginning of the list again.
+ / - For increasing or decreasing the time or temperature shown in the
display.
These can also be entered using the numerical keypad.
Back Selecting this option and confirming with OK returns you to the previous
#
(
list of options.
A tick will appear beside the option which is currently selected. A "!" will
not appear in front of this symbol.
:
This indicates additional information that is available.
This information window can be cleared by selecting OK.
The system lock is "Permitted". See "Settings - Safety".
On = Operation not possible.
0
1
Off = Operation possible.
N
A minute minder time has been set.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
When a function is selected, the following symbols may appear in the display,
depending on setting:
Symbol Meaning
T
S
Duration
Finish
R
O
Start time
Programme finished
R
3
Q
U
O
d
[
V
W
X
P
Y
Z
\
c
T
^
Rapid heat-up phase, Rapid searing phase
Heating-up phase, Searing phase
Core temperature when using the food probe
Fan plus, Fan heat
Intensive bake
Moisture plus
Auto roast
Conventional heat
Top heat
Bottom heat
Defrost
Full grill
Economy grill
Fan grill
Automatic programme, Slow cooking
Lighting
Pyrolytic
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Your oven has a range of oven functions for preparing a wide variety of recipes.
These include:
aTop heat/grill element (under the roof of the oven)
bBottom heating element (under the floor of the oven)
cRing heating element (behind the intake vent for the fan)
dFan (behind the intake vent for the fan)
eSteam injection system
These components are combined in various ways, depending on the oven
function selected. See the letters given in brackets for each function.
Function
Fan plus
[c + d]
Notes
– For baking and roasting.
– You can bake and roast on different levels at the same
time.
– Lower temperatures can be used than with "Conventional
heat" as the Fan plus system distributes the heated air
around the food.
Fan heat
– For baking and roasting on one level.
[a + b + d]
Intensive bake
[b + c + d]
– For cooking dishes which require a moist topping and a
crisp base such as pizza and quiche lorraine.
– Intensive bake is not suitable for baking thin biscuits etc. or
for roasting as the juices will become too dark.
Moisture plus
[c + d + e]
Auto roast
[c + d]
– For baking and roasting with moisture injection.
– For roasting.
During the searing phase, the oven is heated up to a high
temperature (230 °C) to sear the meat.
Once this temperature is reached, the temperature of the
oven is automatically lowered to the set cooking
temperature (continued roasting temperature).
Defrost
– For the gentle defrosting of frozen food.
[c + d]
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Function
Notes
Conventional heat – For baking traditional recipes, e.g. fruit cake, casseroles.
[a + b]
– Also ideal for soufflés.
– If using an older recipe or cookbook, set the oven
temperature for Conventional heat 10°C lower than that
recommended.
The cooking duration does not need to be changed.
Top heat
[a]
– Use this setting towards the end of baking, to brown the
top of a cake, quiche or pizza.
Bottom heat
[b]
– Use this setting towards the end of baking, to brown the
base of a cake, quiche or pizza.
Full grill
[a]
– The whole grill element is switched on and glows red in
order to create the heat required.
– For grilling larger quantities of thin cuts (e.g. steaks).
– For browning food in larger dishes.
Economy grill
– The inner part of the grill element is switched on and
glows red in order to create the heat required.
[a]
– For grilling smaller quantities of thin cuts (e.g. steaks).
– For browning food in smaller dishes.
Fan grill
– For grilling larger items, e.g. rolled meat, poultry.
[a + d]
– The hot air from the grill is distributed around the food by
the fan. This enables a lower temperature to be selected
than when using "Full grill"/"Economy grill".
Automatic
– The list of Automatic programmes available will appear in
the display.
[depending on
programme]
Slow cooking
– For cooking meat or poultry over a long period of time.
[a + b]
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To enter basic settings
A tick L will appear beside the clock
format you have selected.
The oven will switch on automatically
when it is connected to the electricity
supply.
^ Confirm with "OK".
Setting the time of day
Welcome screen
You will then be asked to enter the time
of day. The hour is highlighted.
A welcome screen will appear in the
display, and you will then be requested
to select some basic settings which are
needed before the appliance can be
used.
^ Using the numerical keypad, enter
the hour, confirm with "OK" and then
enter the minutes in the same way.
Follow the instructions in the display.
Time of day display
Finally you will be asked when you want
the time of day to show in the display
when the appliance is switched off; see
"Settings - Time - Display".
Setting the language
First select the language you want:
^ Scroll through the list using one of the
sensors to the right of the arrows % /
( until the language you require
appears in the display.
ß On
The time is always visible in the
display.
ß On for 60 seconds
The time is only ever visible for
60 seconds.
^ Touch the sensor to the left of the
language you want.
A tick L will appear beside the
language you have selected.
ß Do not display:
The display remains dark.
^ Confirm your choice by touching the
^ Touch the sensor to the left of the
sensor next to "OK".
setting you want.
If you have selected the wrong
language by mistake, proceed as
After you have confirmed your selection
with "OK", the display will show a
message to tell you that:
described in "Settings - Language J"
to get back to the correct language.
– your appliance is equipped for the
Miele|home system.
Clock format
– your appliance has been successfully
set up to use it for the first time.
The request to select the Clock format
will appear. The default setting for the
clock is 24 h.
As soon as you confirm this last
message with "OK", your appliance is
ready for use.
^ Touch the sensor to the left of the
clock format required.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Cleaning and heating up for
the first time
^ Heat the empty oven for at least an
hour.
Please ensure the kitchen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
Before use, please remove
–
any stickers from the oven and
from any accessories.
any protective foil from the
oven front.
–
This procedure can be set to switch
itself off automatically. See "To use
Automatic switch-off".
See "Cleaning and care" for more
information.
Before using the oven for the first time
^ Leave the appliance to cool down to
– take all accessories out of the oven
room temperature.
and wash them.
^ Then wipe the oven interior out with a
solution of hot water and a mild
detergent, and dry it thoroughly with
a soft clean cloth.
– then heat the oven up once with
nothing in it. New ovens have a
slight smell on first use and this will
dissipate the smells before you use it
to cook food.
Leave the oven door open until the
oven interior is completely dry.
^ Before heating the oven up it is a
good idea to wipe the interior out with
a damp cloth. This way any dust or
bits of packaging that may have
accumulated in the oven cavity
during storage and unpacking will be
removed.
^ Touch the K sensor.
The appliance will switch on and the
main menu will appear in the display.
^ Touch the sensor next to "Fan plus".
The recommended temperature of
160 °C will appear highlighted.
^ Increase the temperature to 250 °C
(the highest temperature). To do this,
you can either use the sensor next to
+ or the numerical keypad.
^ Touch the sensor next to "OK".
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Automatic programmes
^ Select the option you require.
Each Automatic programme has a
sub-menu with further options which will
now show in the display.
Your appliance has a wide range of
Automatic programmes to enable you
to achieve excellent results with
ease.
Each step you need to take before
starting the Automatic programme will
appear in the display.
Simply select the programme for your
food, and follow the instructions in
the display.
Depending on the programme you
have selected, further information or
prompts will appear regarding
You can call up the Automatic
programmes by selecting the "Automat-
ic" option from the main menu.
– the roasting or baking dish,
– the shelf level,
^ Switch the oven on with the K
sensor.
– the use of the food probe,
^ Select "Automatic".
– the amount of water required for
programmes with Moisture plus,
A list will appear in the display.
ß Cakes
ß Baked goods
ß Bread
– the cooking duration.
ß Bread mixes
ß Bread rolls
ß Pizza
ß Meat
ß Game
For further information about the
Automatic programmes, including a
selection of recipes, please refer to
the "User instructions" and the
"Moisture plus" recipe book.
ß Poultry
ß Fish
ß Bakes/gratins
ß Frozen food
ß Reheat
(Reheating plated meals)
ß Dessert
ß Slow cooking
ß Sabbath programme
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual operation
Selecting "Change" brings up all the
options which can be changed during
the current programme, e.g. the
selected temperature.
To operate the oven manually, switch
the appliance on, select the oven
function and temperature, then
switch it off again once you have
finished cooking.
^ At the end of the cooking
programme, switch the appliance off
using the K sensor, and take the
food out of the oven.
^ Place the food in the oven.
^ Switch the oven on with the K
sensor.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
The Main menu will appear in the
display.
^ Select the required function.
The fan is sensor-controlled and will
switch off automatically.
The sub-menu for the oven funtion you
require will show in the display, and the
recommended temperature will light up.
You can change the default setting for
this (see "Settings - Cooling fan").
^ Change the temperature in the
display if necessary.
The oven heating and the cooling fan
will switch on.
You can follow the progress of the
programme in the display.
In addition to the cooking function and
temperature, the words "Heating-up
phase" or "Rapid heat-up phase" will
show in the display until the oven has
reached the set temperature.
Once the set temperature is reached, a
signal will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
Then "Programme in progress" will
appear.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
More about manual operation
To change the temperature
Automatic switch-off can be selected
when operating the oven manually.
You can also adjust the heat-up
phase and the humidity level inside
the oven.
As soon as you have selected a
function, the recommended
temperature with the temperature range
which can be set in brackets beside it
will appear in the display.
The following recommended
To select a function
^ Switch the oven on.
temperatures are set at the factory:
Fan plus . . . . . . . . . . . . . . . . . . . 160 °C
Fan heat . . . . . . . . . . . . . . . . . . . 160 °C
Auto roast* . . . . . . . . . . . . . . . . . 160 °C
Moisture plus . . . . . . . . . . . . . . . 160 °C
Intensive bake . . . . . . . . . . . . . . 170 °C
Conventional heat. . . . . . . . . . . . 180 °C
Top heat . . . . . . . . . . . . . . . . . . . 190 °C
Bottom heat . . . . . . . . . . . . . . . . 190 °C
Fan grill. . . . . . . . . . . . . . . . . . . . 200 °C
Economy grill . . . . . . . . . . . . . . . 240 °C
Full grill . . . . . . . . . . . . . . . . . . . . 240 °C
Defrost . . . . . . . . . . . . . . . . . . . . . 25 °C
^ Select the required function.
After selecting an oven function,
options which can be entered or
changed for the cooking programme
will appear in the display, e.g.:
ß Temperature
ß Core temp. - - °C
(This only appears when the food
probe is being used; see "Food
probe" in the User instructions).
* Initial searing phase temperature
approx. 230 °C, then drops to 160 °C
for continued roasting
ß Duration
ß Start time
ß Finish
If the recommended temperature is
suitable for your recipe, confirm it with
"OK".
ß Heating-up phase
(Only with Fan plus, Auto roast and
Conventional heat).
If it is not suitable, you can change it for
this particular cooking programme.
ß Moisture reduction
You can also change the
ß Change function
recommended temperature
permanently to suit your personal
cooking practices. See "Settings -
Recommended temperatures".
32
Download from Www.Somanuals.com. All Manuals Search And Download.
More about manual operation
Entering the Duration, a Start
time or Finish time
To use Automatic switch-off
To switch a programme off
automatically select Duration or Finish
and enter the time required.
By entering the Duration, Start time or
Finish time, the cooking process can be
programmed to switch off, or on and
off, automatically.
Example:
The time is 11:45. Your dish will take
30 minutes to cook, and needs to be
ready at 12:15.
ß Duration
When entering the Duration, you are
entering the time that the food takes
to cook.
Select Duration, and enter 0:30 h, or
select Finish and enter 12:15.
Once this time has elapsed, the oven
heating switches off automatically.
The maximum duration that can be
entered is 12 hours.
The oven will switch off automatically at
the time set.
The Duration cannot be entered if the
food probe is being used as in this
case the length of the cooking
programme depends on the core
temperature being reached.
ß Start time
By entering the Start time, you
specify the time you want cooking to
start. The oven will switch on
automatically at the time you have
set.
The Start time can only be used in
conjunction with Duration or Finish,
except when using the food probe.
ß Finish
By entering the Finish time, you
specify the time you want cooking to
finish. The oven will switch off
automatically at the time you have
set.
A Finish time cannot be entered if the
food probe is being used as in this
case the end of the cooking
programme depends on the core
temperature being reached.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
More about manual operation
Delaying the start with Automatic
switch-off
Sequence of the cooking programme
when using Automatic switch-off
The following will appear in the display:
We recommend using automatic
switching on and off when roasting.
However, do not delay the start for
too long when baking as the cake
mixture or dough will dry out, and
the raising agents will lose their
effectiveness.
Before the programme starts
– The cooking function and selected
temperature
– "Start at" and the start time
After the programme has started
– The heating-up phase until the set
temperature is reached
To switch a programme on and off
automatically you have various
options:
– Once this temperature is reached, a
tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
– Enter the Duration and Finish time.
– Enter the Start time and the Duration.
– Enter the Start time and the Finish.
After the heating-up phase
– The "Time left" counting down
Example:
The time is 11:30. Your dish will take
30 minutes to cook, and needs to be
ready at 12:30.
Shortly before the end of the
programme
– The oven heating switches off.
– The cooking programme continues
using residual heat. The residual
heat in the oven is sufficient to
complete the cooking process.
– Energy save phase will appear in the
display.
Select Duration and enter 0:30 h.
Then select Finish and enter 12:30 h.
The Start time will be calculated
automatically. "Start at 12:00" will
appear in the display.
– The cooling fan continues to run, as
does the hot air fan if a "Fan" setting
has been chosen.
The cooking programme will start at this
time.
At the end of the cooking programme
– The hot air fan switches off,
depending on the cooking function
being used.
– The message "Programme finished"
and the O symbol appear in the
display.
– A tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
34
Download from Www.Somanuals.com. All Manuals Search And Download.
More about manual operation
After the cooking programme has
finished
Changing the heating-up
phase
– The cooling fan will continue to run
for a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the
control panel or in the oven housing
unit.
With the Fan plus, Auto roast and
Conventional heat functions, the
Heating-up phase will appear with the
following options:
ß Rapid
The fan is sensor-controlled and will
switch off automatically. You can
change the default setting for this
(see "Settings - Cooling fan run-on").
– To save energy, the oven will switch
off automatically if it is not used
again within a certain time.
(Factory default)
The top heating/grill elements, the
ring element and the fan are
switched on at the same time so that
the oven reaches the desired
temperature as quickly as possible.
R shows in the display.
The timing depends on the settings
selected (cooking function,
ß Normal
Only the heating elements required
for the cooking function selected are
switched on; see "Functions".
3 shows in the display.
temperature, duration).
Changing or deleting an entered
cooking time
Selecting "Change" brings up all the
options which can be changed.
The Rapid heat-up phase should not
be used for some items such as
pizza, biscuits and small cakes
because they will brown too quickly
from the top.
^ Select the option you want and
change it.
Use the U sensor to delete the entered
times.
To switch off Rapid heat-up
If there is a power cut, all data entered
will be deleted.
– For one cooking programme:
Select "Heating-up phase", then
"Normal".
Rapid heat-up is also switched off if
a temperature of less than 100 °C is
set.
– In general:
See "Settings - Heating-up phase".
35
Download from Www.Somanuals.com. All Manuals Search And Download.
More about manual operation
Pre-heating the oven
To pre-heat the oven:
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating
phase.
^ Select the required function and set
the temperature.
^ Wait for the oven to reach the set
temperature.
It is only necessary to pre-heat the oven
in a few instances:
Once the set temperature is reached,
a signal will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
With Fan plus
– pre-heating may be necessary for
foods which cook in less than 20
minutes and for foods such as puff
pastry and yeast mixtures where
instant heat is required to make them
rise quickly.
^ Then place the food in the oven.
– roasting beef/fillet.
With Conventional heat
– It is usually necessary to pre-heat the
oven.
– baking pastry and cheesecake/flan
bases,
– pre-heating may be necessary for
foods which cook in less than
30 minutes and for foods such as
puff pastry and yeast mixtures where
instant heat is required to make them
rise quickly.
– roasting beef/fillet.
The Rapid heat-up phase should be
switched off when baking pizza,
biscuits and small cakes. Otherwise
they will brown too quickly from the
top.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
More about manual operation
Activating moisture reduction
Change function
It is a good idea to use this function
You can change the function selected
when cooking items which are moist on via this option.
the inside but which should be crispy
The times already entered will be kept.
on the outside, e.g. frozen chips,
croquettes or pork with crackling.
It is also suitable for deep filled fresh
fruit cakes, such as plum or apple
cake.
You can activate Moisture reduction
with any function.
For best results, activate it at the
beginning of the cooking
programme.
^ Place the food in the oven.
^ Switch the oven on with the K
sensor.
^ Select the required function and set
the temperature.
^ Touch the OK sensor.
The list of options will show in the
display.
^ Select Moisture reduction and touch
the On sensor to confirm.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
User programmes
Up to 25 frequently used recipes can be The User programmes menu
saved under a user-defined name, and
If user programmes have already been
then called up again as required.
created and saved, the following will
Either
appear:
– Select the Save as option at the end
of running an Automatic programme
and give the programme a name of
your choice, or
ß Select
For calling up and starting an
existing User programme.
You choose whether the programme
should "Start now" or "Start later".
– select the User programmes menu.
You can combine up to four cooking
steps and save them under a name
of your choice.
ß Create
This is used to create a new User
programme.
ß Change
For altering an existing programme.
ß Delete
Existing programmes can be deleted
individually.
You can also delete all User
programmes at the same time - see
"Settings - Factory default - User
programmes".
ß Use in main menu
You can place up to three user
programmes in the Main menu.
Changes to the Main menu can be
reset via "Settings - Default settings -
Main menu".
38
Download from Www.Somanuals.com. All Manuals Search And Download.
User programmes
To create a User programme
After confirming with "Continue", select
the name given in the display, or enter
your own name. To do this:
If programmes already exist under
User programmes, the "Create"
option has to be selected in order to
save additional programme stages to
memory.
^ Use the sensors next to arrows ) *
to select a character.
^ When the letter or number you want
is highlighted, confirm it with "Select
character". The letter or number you
have selected will appear in the top
line of the display after "Name".
Then continue following the
instructions below.
^ Select the "User programme" menu.
^ Select and confirm the cooking
^ Select the rest of the letters or
function you want.
numbers for your programme name.
^ Alter and confirm the pre-set
recommended temperature if
required.
You can use the "Delete character"
option to correct any wrong entries.
Select "Space" where a space is
required.
^ Select a duration, or a core
temperature if using the food probe,
and confirm your selection.
^ Confirm the programme name with
"OK".
^ Do a final check of all of the settings
and confirm them with "Continue".
To call up an existing User
programme
^ You can add more cooking stages,
for example, if you want to add
another cooking function to follow on
from the first.
^ Select "User Programmes" from the
main menu, and then the "Select"
option. Programmes saved under
User programmes will then appear in
the display.
Proceed as described above.
^ Finally set the shelf level to be used.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
The "Moisture plus" function uses a
steam injection system.
Please refer to the "Moisture plus"
booklet supplied with your oven for
further information and a selection of
recipes.
Water is taken into the steam injection
system via the tube underneath the
control panel on the left. The water is
then injected as bursts of steam into the
oven compartment during the cooking
process.
Moisture plus is not suitable for
mixtures which already contain a lot of
moisture, such as choux pastry and
meringues, as the addition of steam
does not allow them to dry out
sufficiently.
The steam inlets are located at the rear
left corner of the roof of the oven.
,Only use water with this function.
Moisture plus is activated with Automat-
ic programmes or you can select the
special "Moisture plus" function.
Other liquids will damage the
appliance.
Baking, roasting or cooking with
Moisture plus uses just the right amount
of steam and optimum air flow for very
even cooking and baking results:
delicious fresh bread with a glossy
crust; rolls and croissants as good as
the baker makes; tender, succulent
meat with a well browned finish;
perfectly finished oven bakes; delicious
soufflés and much more.
,The steam injection system
should be rinsed through before you
use an Automatic programme with
Moisture plus or the Moisture plus
function for the first time.
To do this, run the oven using
"Moisture plus - 160 °C - Automatic
burst of steam" for about 30 minutes.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Automatic programmes
Night baking
Automatic programmes with Moisture
plus set the optimium temperature, the
degree of moisture and also the
duration automatically.
Some of the Automatic programmes for
bread and rolls have the option of
baking during the night, so that you can
enjoy freshly baked bread for breakfast
the next morning.
At the beginning of the programme you
will be prompted to allow a specified
amount of water to be drawn into the
oven.
The "Finish" option will appear when
you have selected the programme.
When "Finish" is selected, a finish time
will appear which is the cooking
duration for the programme plus five or
six hours, depending on programme.
You can change this to the time you
want the bread to be ready at the next
morning.
The amount of water specified will be
more than the amount which is actually
needed which means that some of the
water will remain in the container as not
all of it will be drawn up into the oven.
The programme will control how many
bursts of steam are required and at
what point they are injected.
Follow the instructions which then
appear in the display.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Moisture plus d
After selecting Moisture plus you need
to set the number of bursts of steam.
The options are:
When using the Moisture plus function
you will need to enter
– the temperature (at least 130 °C),
and
ß Automatic
This requires enough water for one
burst of steam. The burst of steam
will be injected into the oven
automatically after the heating-up
phase.
– the number of bursts of steam.
You can also enter the cooking duration
or you can use the food probe.
Steam is injected for about
5 minutes.
Number of bursts of steam and when
they are injected
ß 1 burst of steam
ß 2 bursts of steam
ß 3 bursts of steam
The number of bursts of steam and
when they are injected will depend on
the type of food being cooked:
The quantity of water required will
depend on the number of bursts of
steam.
– Dough mixtures will rise better if
steam is injected at the beginning of
the programme.
The earliest point at which steam can
be injected is after the heating-up
phase has been completed.
One burst of steam takes approx.
5 minutes to be injected into the
oven.
– Bread and rolls also rise better if
exposed to steam at the start.
Injecting a burst of steam at the end
of the programme will give the bread
and rolls a glistening crust.
It is a good idea to set the minute
minder to remind you when to inject
the bursts of steam required.
– When roasting meat with a high fat
content injecting steam at the
beginning of roasting will draw out
the fat.
It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
Please refer to the sample recipes in
the "Moisture plus" booklet.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Using Moisture plus d
^ Place the food in the oven.
^ Select Moisture plus d.
^ Select a temperature.
The amount of water required will be
drawn up into the oven. As the water is
taken in, bars will appear in the display.
The amount of water specified will be
more than the amount which is actually
needed which means that some of the
water will remain in the container as not
all of it will be drawn up into the oven.
^ Select Automatic burst of steam or
select the number of bursts of steam.
^ Fill a suitable container with the
quantity of water specified.
Automatic/
When you close the oven door you will
hear the noise of the pump briefly.
– Automatic burst of steam
1 burst of steam: approx. 100 ml
2 bursts of steam:approx. 150 ml
3 bursts of steam:approx. 250 ml
^ Once the heating-up phase has been
completed, the automatic burst of
steam is injected and the water will
vaporise in the oven compartment.
^ Pull the fill tube forwards (located
below the control panel on the left).
Once the steam has been injected
successfully, the programme will
continue to the end.
– Injecting bursts of steam manually
Once the heating-up phase has
finished, the bursts of steam can be
injected at the intervals given in the
recipe.
Set the minute minder N as a reminder.
When it is time to inject steam:
^ Select "Release steam".
The water will vaporise in the oven
compartment.
^ Hold a container with the quantity of
water specified under the tube as
shown. Start the water intake process
with "OK".
If more bursts of steam are required,
proceed as described above.
Once the steam has been injected
successfully, the programme will
continue to the end.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
To evaporate residual moisture The residual moisture evaporation
process
If there is still water in the steam
injection system at the end of a
programme or if the programme is
cancelled, you will be prompted to
evaporate the residual moisture.
The oven will heat up to approx.
150 °C, and the residual water in the
oven cavity will evaporate.
How long this takes will depend on the
amount of water in the system.
This prompt will appear
– when the appliance is switched on,
– when selecting "Moisture plus", or
– when selecting an automatic
programme that uses Moisture plus.
Steam will condense on the door
and the oven cavity, and the
moisture will then need to be wiped
off after the oven has cooled down.
Select "Cancel" to cancel the process
or "OK" to start it.
It is best to start the evaporation
process straight away so that only
fresh water can be used during the
next cooking programme.
To start the residual moisture
evaporation process
Confirm the prompt "Evaporate residual
moisture" with OK.
The evaporation process will start
immediately. The display will show
the approximate time remaining.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
To cancel the residual moisture
evaporation process
Descaling
The oven will need to be descaled
depending on the number of cooking
programmes using Moisture plus which
have been run and the amount of water
taken into the oven for these. This will
be indicated in the display.
After the appliance has been
switched on, the prompt to evaporate
residual moisture will appear in the
display. Touch the sensor next to
"Cancel". You will only be able to run
functions and Automatic programmes
without Moisture plus.
The steam injection system should be
descaled regularly. How often this
needs to be done will depend on the
water hardness level in your area.
If you select "Moisture plus" or one
of the Automatic programmes with
Moisture plus, the prompt to evaporate
residual moisture will appear immedi-
ately.
You can start the descaling process at
any time by selecting "Descale" in the
main menu.
If you do not want to start the residual
moisture evaporation process, you will
need to press the Cancel sensor for at
least 3 seconds.
If you do not carry out the descaling
process when the prompt to descale
the oven appears, you will only be able
to run functions and Automatic
You can now start the cooking
programme.
programmes without Moisture plus.
See "Cleaning and care" for more
information about descaling.
,Do not cancel the prompt for
residual moisture evaporation too
often, as this might cause the steam
injection system to overflow when
taking in more water.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Minute minder (egg timer) N
The minute minder can be used to time At the end of the time set for the minute
any activity in the kitchen, e.g. boiling
eggs.
minder
– the N symbol will flash.
You can enter a time of up to a
maximum of 9 hours, 59 minutes and
59 seconds.
– A tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
You can set the minute minder at the
same time as another timed
– the display will show the time
counting upwards.
programme, e.g. as a reminder to stir a
dish or add seasoning etc.
^ Touch the N sensor.
With "Moisture plus d":
It is a good idea to use the minute
minder to remind you when to
release the bursts of steam
manually.
To alter the time set for the
minute minder:
^ Touch the N sensor.
^ Use the U sensor to set the time to
"0 : 00 : 00" and then enter a new
minute minder time.
To set the minute minder
^ Touch the N sensor.
^ Confirm your entry with the OK
sensor.
"0 : 00 : 00" will appear in the display.
^ Enter the minute minder time using
the numerical keypad:
To cancel the time set for the
minute minder
first enter the hours, then the minutes
followed by the seconds.
(For example: for 6 minutes
20 seconds
^ Touch the N sensor twice.
enter: 0 06 20).
^ Confirm your entry with the OK
sensor.
If you use the + or - to enter the time
you must confrim each part of the entry
with the OK sensor.
The time counts down in the display.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Your appliance is supplied with a
number of standard default settings.
Currently selected settings are
indicated by a "L" and without a "!"
next to them.
To change a setting:
Settings cannot be altered while a
cooking programme is in progress.
^ Select the "Settings J" option.
The list of options will show in the
display.
ß Language J
ß Time
Language J
You can set the language you want the
display to appear in.
ß Lighting
ß Main menu
ß Catalyser
After selecting and confirming
"Language", the language you have
selected will appear in the display.
ß Cooling fan run-on
ß Pyrolytic
If you have selected the wrong
language by mistake, you can follow
the flag symbol J to get back to the
Language J menu.
ß Heating-up phase
ß Start
ß Recommended temperatures
ß Display
ß Volume
ß Safety
ß Units
ß Showroom programme
ß Factory default
^ Select and confirm the one you want
to change.
If a setting is not confirmed within a
certain time, the display will revert to
the "Settings" list.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Time
To set the time of day
The options are:
ß Display
ß Clock format
ß Set
The time of day is set using either the
numerical keypad or the + and -
sensors:
First enter the hours and confirm with
"OK". Then enter the minutes and
confirm with "OK".
If there is a power cut, the current
time of day will reappear once
power has been restored. The
appliance will store this data for
approx. 200 hours. After 200 hours it
will show "12:00" and will need to be
re-set.
Lighting
ß On
The oven interior lighting remains on
during the entire cooking
programme.
Display
Select how you want the time to appear
in the display when the oven is
switched off:
ß On for 15 seconds
(Factory default)
The oven interior lighting will switch
off 15 seconds after the start of a
cooking programme.
ß On
The time of day will always show in
Pressing one of the illuminated
sensors next to the display will
switch the lighting on for another
15 seconds.
the display.
ß On for 60 seconds
The time is only ever visible for 60
seconds when the oven is switched
on and when it is switched off.
With Automatic programmes you will
need to touch the N sensor twice
because the sensors next to the
display are not illuminated.
ß Do not display
The time will only show in the display
when the oven is being operated.
Clock format
The time of day can be altered from a
24-hour display to a 12-hour display:
ß 12 h: 12 hour clock display
ß 24 h: 24 hour clock display
(Factory default)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Main menu
Catalyser
You can change the order in which
options appear in the main menu. Up to
three options can be placed at the
beginning of the main menu (excluding
Settings).
ß On
(Factory default)
The catalyser is always switched on.
ß Off next prog. only
The catalyser will be switched off for
When you select this option you will be
prompted to set positions 1, 2 and 3.
the next programme only.
You will be given the choice of
selecting a standard oven function or
an Automatic or a User defined
programme for each position. After
selecting and confirming one position
you will be prompted to set the next
one.
Once you have set all three the list will
appear in the display.
If you have already set a programme of
your choice at the beginning of the
main menu (see "User programmes -
Use in main menu"), the next one will be
added to the list.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Cooling fan run-on
Pyrolytic
The cooling fan will continue to run for a ß With reminder
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
ß A reminder to carry out the pyrolytic
cleaning process will appear in the
display.
ß Without reminder
(Factory default)
ß Sensor controlled
(Factory default)
You will not be reminded to carry out
the pyrolytic cleaning process.
The auto sensor will switch off the
cooling fan.
Heating-up phase
ß Temperature controlled
The cooling fan will switch off when
the temperature in the oven
compartment drops below approx.
70 °C.
The heating-up phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
ß Rapid
ß Time controlled
The cooling fan will switch off after
(Factory default)
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
R and "Rapid heat-up phase" or
"Rapid searing phase" will appear in
the display.
approx. 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
ß Normal
Only the heating elements for the
cooking function selected are
switched on.
3 and "Heating-up phase" or
"Searing phase" will appear in the
display.
Condensate can
–
damage the housing
unit/worktop.
–
lead to corrosion in the oven.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Start
Display
ß Automatic
Contrast
(Factory default setting)
A programme will start automatically
approx. 20 seconds after making
your last entry without having to
select Start.
The contrast is represented by a bar
with seven segments.
P P P P G G GM
Factory default: Four blocked
ß Manual
segments.
If "Manual" has been selected, "Start"
will appear at the beginning of each
programme and must be confirmed
before the programme will start.
To change the contrast touch the
"lower" or "higher" sensor.
Brightness
Recommended temperatures
The brightness is represented by a bar
with seven segments.
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
P P P P G G GM
Factory default:
The recommended temperature can be
changed for the following functions:
Six blocked segments.
To change the brightness touch the
"darker" or "lighter" sensor.
ß Defrosting
ß Auto roast
ß Full grill
ß Economy grill
ß Fan heat
ß Fan plus
ß Intensive bake
ß Moisture plus
ß Conventional heat
ß Top heat
ß Fan grill
ß Bottom heat
The currently selected recommended
temperatures will be displayed.
When you select a function the
recommended temperature is
highlighted.
The setting range available will also
appear.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Volume
Keypad tone
The volume of the keypad tone, which
bleeps when touched, can be changed
or the sound switched off completely.
Buzzer tones
The volume is represented by a bar
with seven segments.
P P P P G G GM
Factory default: Three blocked
P P P P G G GM
Factory default: Three blocked
segments.
segments.
To change the volume touch the
"quieter" or "louder" sensor.
To change the volume touch the
"quieter" or "louder" sensor.
If all segments are blocked out the
volume is on maximum.
If all segments are blocked out the
volume is on maximum.
If none of the segments are blocked out
If none of the segments are blocked out the volume has been turned off.
the volume has been turned off.
Frequency
The frequency of the buzzer can be
changed. Changing the frequency may
be necessary to optimise the volume in
different installation environments.
The frequency range is represented by
a bar with 15 segments. Each segment
represents a different frequency.
P G G G G G G G G G G G G G GM
To change the frequency touch the
sensor next to the "-" or "+" symbols.
If the segment on the far left is the only
one blocked out (factory default) a brief
signal will sound after a short while four
times at 15 second intervals.
If more than one segment is blocked
out a continual signal will sound after a
short while for approx. 8 minutes on the
frequency set.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Safety
In operation lock
(depending on model)
System lock 0
The In operation lock prevents the
appliance from being switched off
inadvertently and cooking programmes
from being altered.
The system lock prevents the appliance
being switched on unintentionally, by
children for example.
The system lock has to be set to
When the In operation lock has been
"Permitted" (activated) in order to use it. activated, the appliance will be locked
a few seconds after a cooking
ß Permitted
programme has started.
The system lock is active.
The1 symbol appears in the
display, as soon as the appliance is
switched off. The system lock can
now be used.
^ To activate the In operation lock,
select "On".
ß On
During a cooking programme, you
must touch a sensor for at least 5
seconds before it will react.
ß Not permitted
(Factory default)
The system lock is deactivated.
ß Off
(Factory default)
To switch the system lock on or off
The sensors will react immediately
they are touched.
^ Touch the sensor next to the 1
symbol.
You can choose between:
ß On
The appliance is locked and cannot
be operated.
0 appears in the display.
ß Off
The appliance is unlocked and can
be operated.
1 appears in the display.
The minute minder can still be used.
The system lock remains active even
after a power cut.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Units
Factory default
ß All settings
Temperature
Any settings that you have altered
will be reset to the factory default
setting.
ß °C
(Factory default)
ß °F
ß User programmes
All saved user programmes will be
deleted.
Showroom programme
ß Main menu
The main menu will be reset to the
ß Off
(Factory default)
factory default setting.
ß Demo programme
ß Continuous loop
ß Demo mode
This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.
ß Recommended temperatures
Only those recommended
temperatures which have been
changed will be reset to the factory
default settings.
Do not activate this setting for domestic
use!
If you select and activate this option by
mistake, you can deactivate it as
follows:
– Demo programme
Select the "Off" option and follow the
instructions in the display.
– Continuous loop
– Demo mode
Touch one of the sensors next to the
display and follow the instructions.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts Department
or via the internet on
All external surfaces are susceptible
to scratching. Scratches on glass
surfaces could even cause a
breakage in certain circumstances.
Contact with unsuitable cleaning
agents can alter or discolour the
external surfaces.
,Do not use a steam cleaner to
clean the appliance. The steam
could reach electrical components
and cause a short circuit.
To prevent damage to your appliance
when cleaning do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
Appliance front
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Remove any soiling immediately.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
Clean the front using a damp Miele
microfibre E-cloth or with a clean
sponge and a solution of hot water and
washing-up liquid. Wipe dry using a
soft cloth.
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– eraser blocks,
– sharp metal scrapers.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Accessories
FlexiClip telescopic runners
Remove all accessories as well as
the runners and any extra
accessories such as FlexiClip
runners from the oven interior before
starting the pyrolytic cleaning
process. This also applies to shelf
runners and any optional
accessories.
Do not clean FlexiClip telescopic
runners in a dishwasher. This would
remove the special lubricant.
When cleaning do not use:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
The high temperatures needed for
pyrolysis will damage the
accessories.
– stainless steel cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers.
Baking tray, universal tray,
anti-splash insert (if applicable)
When cleaning the runners be very
careful not to wash out the special
lubricant in them.
The surface has been treated with
PerfectClean enamel.
Avoid frequent:
Please refer to the section on
"PerfectClean" for information on
cleaning and care.
– soaking in hot soapy water,
– use of oven spray,
– cleaning of the bearings.
Rack, runners
FlexiClip telescopic runners are best
cleaned after each use.
The surface has been treated with
PerfectClean enamel.
This prevents soiling drying on or being
burnt on when the oven is used again.
Treat in the same way as other surfaces
coated with PerfectClean. See
"PerfectClean".
If the runners are used frequently
without being cleaned, it may become
very difficult or even impossible to
clean them.
Food probe
The food probe is dishwasher-safe.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Normal soiling
Please note:
Clean the surfaces using a damp Miele When baking cakes with moist toppings
microfibre E-cloth or with a clean
sponge and a solution of hot water and
washing-up liquid. Wipe dry using a
soft cloth.
or fillings e.g. fruit crumble, be careful
not to let them spill over. Should this
happen there is a danger of sticky fruit
juices adhering to the runners and
hindering or even preventing their
movement in and out of the oven.
Clean the runners as described above
and very carefully use a soft nylon
brush to clean the bearings inside the
runners.
Remove any cleaning agent residues
as these could reduce the anti-stick
effect.
Heavy soiling
If necessary, the scouring pad on the
reverse of a non-stick washing-up
sponge can be used to clean the
runners. Cleaning is easier if a little
washing-up liquid is applied to the
soiling and left to soak in for a few
minutes before cleaning.
Lubricating the FlexiClip telescopic
runners
If the lubrication on the telescopic
runners dries out, they can be
relubricated as necessary to ensure
they continue to run smoothly.
For very heavy soiling the telescopic
runners can be soaked in a solution of
hot water and washing-up liquid for a
maximum of 10 minutes.
A special lubricant is available from
Miele.
Only use this special lubricant, as it
is designed to withstand high
temperatures in the oven.
After cleaning there may be some
discolouration or lightening to the
telescopic runners. This will not
affect the functioning of the runners
in any way.
Other lubricants can harden and
stick to the telescopic runners when
they are heated.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
PerfectClean
,Allow the oven and any
accessories to cool down before
cleaning by hand. Danger of
burning.
The following have been treated with a
special finish called PerfectClean:
– baking tray
– universal tray
For the optimum performance of
PerfectClean, it is important to clean the
oven and accessories after each use.
– anti-splash insert (if applicable)
PerfectClean surfaces have very good
anti-stick properties and are much
easier to keep clean than conventional
oven enamel, if cleaned regularly.
The surfaces will become harder to
clean and the anti-stick properties will
deteriorate if soiling is not removed
after each use and allowed to build up.
In extreme cases cleaning may
become impossible.
Food can be lifted off more easily, and
soiling from baking and roasting is
easier to remove.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
To avoid damaging the surface
structure, the following must not be
used on PerfectClean surfaces:
PerfectClean last for many years.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
PerfectClean surfaces can be treated
as you would treat glass.
Food can be sliced or cut up on the
PerfectClean surface in the same way
as on a baking tray with conventional
enamel.
– cleaning agents for ceramic hobs,
– wire wool or metal scourers,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
Do not use ceramic knives on
PerfectClean treated surfaces, as
these can cause scratches.
– oven spray must not be used on
PerfectClean surfaces which are hot
or left on for too long,
– PerfectClean enamelled items must
not be washed in a dishwasher,
– spot cleaning.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
For extremely stubborn soiling a
glass scraper or a non-abrasive
stainless steel pad can be used.
After cleaning, rinse thoroughly with
clean water to remove any residual
cleaning agents as these can
The steps described above should
enable you to clean the surfaces
thoroughly.
diminish the anti-stick properties.
Normal soiling should be cleaned as
soon as possible after each use with a
soft sponge and a solution of hot water
and a little washing up liquid. The
longer soiling is left, the harder it may
become to remove.
Should the PerfectClean surface be
damaged by any of the above
measures not being heeded, it will still
retain the anti-stick qualities of standard
enamel and be as easy to keep clean
as standard enamel.
If necessary, the souring pad on the
back of a non-scratch washing-up
sponge or a soft nylon brush can be
used.
Please note:
You may find it easier to clean the oven
trays if you soak any deposits in a
solution of hot water with a little
washing-up liquid for a few minutes.
– Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Exercise
caution and make sure the oven is
not too hot - danger of burning.
Stubborn soiling can be more difficult
to clean and may require an oven
cleaning spray.
– Soiling such as spilt juices and
roasting deposits may cause lasting
discolouration or matt areas to
appear. Discolouration or matt areas
will not affect the efficiency of the
surface. Follow the cleaning
Allow the PerfectClean surfaces to cool
down to room temperature before
applying the spray. Apply a proprietary
oven cleaning spray and leave to take
effect for up to ten minutes only.
Miele oven cleaning spray can be left
on for longer. Always follow the
instructions on the packaging.
instructions given above and do not
use force to remove them.
If necessary, the pad on the back of a
non-scratch washing-up sponge can
also be used.
Repeat the process, if necessary.
After using oven spray, rinse thoroughly
with clean water and then dry
thoroughly.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Oven interior
Most cooking residues can be removed
with a damp cloth and a mild solution of
hot water and washing-up liquid.
The oven interior is coated with dark
pyrolytic enamel which facilitates
cleaning.
Never use hard brushes, hard
sponges, wire wool pads*, knives or
any other abrasive materials or
cleaning agents. They can damage
the enamel.
This is a particularly hard enamel with
an extremely smooth surface and very
good anti-stick properties.
Manual cleaning of the oven interior
If using an oven spray, the
manufacturer's instructions must be
followed.
Allow the oven to cool down before
cleaning by hand.
Danger of burning!
* Non-abrasive stainless steel spiral
pads can, however, be used.
The oven interior and the inside of
the door should be cleaned after
each use. If this is not done
To make cleaning easier
subsequent soiling from baking and
roasting will become worse and
make cleaning harder. In extreme
cases, heavy soiling could even
damage the surface.
– remove the oven door,
– dismantle the door,
– remove the FlexiClip telescopic
runners,
– take out the shelf runners,
– lower the top heating/grill element.
There is a fibre-glass door seal
around the oven cavity.
Instructions for doing so are given
further on in this section.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing it
can damage it.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Pyrolytic cleaning of the oven interior At the end of the programme it will not
be unlocked until the temperature
Before starting a pyrolytic cleaning
inside the oven has dropped to below
process please note the following:
280 °C.
Remove any coarse soiling from the
oven before you start.
If the pyrolitic cleaning programme has
been started by mistake or if the
process is interrupted, the door lock will
be released:
Clean the inside of the door (glass).
– immediately if the temperature is
below 280 °C.
There is a fibre-glass door seal
around the oven cavity.
– not until the oven interior temperature
is below 280 °C if the temperature
inside the oven is higher than
280 °C.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing can
damage it.
Starting a pyrolytic process
^ Take all accessories out of the oven.
^ Select the "Pyrolitic" function.
^ Start the pyrolytic cleaning process.
The door will lock.
Remove all accessories from the
oven interior before starting the
pyrolytic cleaning process. This also
applies to the FlexiClip runners,
shelf runners and any optional
accessories. The high temperatures
needed for pyrolysis will damage the
accessories.
You can delay the start of the
pyrolytic process for example, to take
advantage of cheaper night electricity
tarifs. To do this:
The oven door gets much hotter
during pyrolytic operation than
during normal use.
^ Select "Start time" and select a time
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
to start the programme at.
You can change the start time if you
wish at any time up until the delay
period has elapsed.
During the pyrolytic process the oven is
heated to over 400 °C. Any residual
soiling is broken down and reduced to
ash by the high temperatures.
At the end of the programme a buzzer
will sound and the message
"Programme finished" will appear in the
display.
The pyrolytic programme duration will
vary depending on the level of soiling.
^ Switch off the oven.
For safety reasons the oven door is
automatically locked at the beginning
of the pyrolytic programme.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
After the pyrolytic process, any
debris (e.g. ash) can easily be wiped
away.
The pyrolytic process will be
cancelled,
– if the oven is switched off.
Remember to wait until the oven has
cooled down before doing so!
Danger of burning.
– if another function is selected during
the pyrolytic process.
– in the event of a power cut.
In the last two instances above, switch
the oven off.
Try not to wipe over the fibre-glass
seal when cleaning the oven cavity.
It is particularly sensitive and should
not be cleaned unless absolutely
necessary. Rubbing it can damage
it.
If the oven interior temperature is below
280 °C, the door lock will be released
after a short while. It can then be
opened.
Start the pyrolytic cleaning process
again if necessary.
Most residues are easily wiped away
with a damp cloth.
Depending on soiling levels in the oven
there may be visible deposits on the
door and below the trim under the oven
cavity. This is best removed using a
non-abrasive sponge or non-abrasive
stainless steel spiral pad and a mild
solution of warm water and washing-up
liquid.
Spilt fruit juices may cause lasting
discolouration to the surfaces This
discolouration is permanent but will
not affect the efficiency of the
enamel. Do not attempt to remove
these marks.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the oven door
^ Then lift the door upwards as far as it
will go.
The oven door is connected to the oven
by hinges.
Do not attempt to take the door off
the hinge guides when it is in a
horizontal position. The hinge guides
will close, and damage the
appliance. Danger of injury.
Before removing the door, the locking
clamps on both hinges have to be
released.
^ Open the door fully.
^ Hold the door securely at both sides
and lift upwards off the hinge guides.
Do not lift the door off by the handle.
The handle could break and
damage the door.
^ To release the locking clamps on the
hinges turn them upwards as far as
they will go until they are at an angle.
See illustration.
Make sure that you lift the door off
equally on both sides.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To dismantle the oven door
Always remove the oven door before
dismantling it.
The oven door is made up of four
panes of glass and has vents at the top
and bottom.
^ Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
When the oven is operating, air is
circulated through the door to keep the
outer pane cool.
If condensate has worked its way in
between the glass panes, the door can
be dismantled in order to clean in
between the panes.
When cleaning the glass panes
please follow the same instructions
given for cleaning the appliance
front.
Do not use abrasive cleaning
agents, sponges or brushes, as
these can scratch the surface.
These could damage the surface.
Scratches can also cause the glass
to break.
^ Flip the glass pane retainers
outwards to open them.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
Ensure that the glass panes are
inserted the correct way round after
cleaning, as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a towel).
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
You can now remove the inner and the
two middle panes.
^ Now gently lift up the upper of the
two middle panes and remove it.
^ Gently lift the inner pane up and pull
out of the cover strip.
^ Gently lift up the lower of the two
middle panes and remove it.
^ Remove the seal.
^ Clean the glass panes and other
parts with a damp Miele E-cloth or a
clean sponge and a solution of hot
water with a little washing-up liquid.
Wipe dry using a soft cloth.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ To reassemble the door:
When refitting the upper pane, the
more angled corner must be
inserted at the top left.
The two middle panes are identical.
To ensure they are refitted correctly,
one of the corners is more angled
than the others.
When refitting the lower pane, the
more angled corner must be
inserted in the left hand retainer at
the bottom.
^ Replace the second of the middle
panes with the more angled corner at
the top left.
^ Replace the first of the middle panes.
The more angled corner must be at
the bottom left.
^ Replace the seal.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To refit the door
^ Push the inner pane into the plastic
strip and insert it in the retainers.
^ Hold the door securely at both sides
and carefully fit it back onto the hinge
guides.
Make sure that the door goes back
on straight.
^ Flip the glass pane retainers inwards
to close them.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Open the door fully.
To remove the FlexiClip
telescopic runners
Make sure the oven heating
elements are switched off and cool.
Take care not to burn yourself on
them.
^ Flip both locking clamps back up as
far as they will go into a horizontal
position. Turn them as far as they will
go into a horizontal position.
^ Lift the FlexiClip runner up at the front
and pull it out along the rail.
It is essential that the clamps are
locked after refitting the door.
Otherwise the hinges could work
loose, resulting in damage to the
door.
Refit the runners carefully as
described in "Features".
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the side runners
To lower the top heat/grill
element
Make sure the oven heating
elements are switched off and cool.
Take care not to burn yourself on
them.
Make sure the oven heating
elements are switched off and cool.
Take care not to burn yourself on
them.
^ Remove the shelf runners from the
oven.
^ Pull the runners forwards out of the
holder and remove.
^ Unscrew the wing nut and lower the
top heating element.
Reassemble them in the reverse
order, making sure all parts are
correctly fitted.
Do not use force to pull it down as
this can cause the element to break.
Take care when cleaning the ceiling
of the oven that you do not damage
the receiver for the food probe
located in the middle of the heating
element.
Reassemble them in the reverse
order, making sure all parts are
correctly fitted.
Make sure that the wing nut is
screwed back on properly.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Descaling
When to run the descaling
programme
Only use the descaling tablets
supplied with the appliance. These
have been specially formulated and
are available from the Miele Spare
Parts Department or via the internet
The descaling programme can be run
at any time.
However, to ensure the oven functions
correctly you will be automatically
prompted to run the descaling
programme after a certain number of
oven uses.
Other types of descaling agents will
damage the oven.
Descaling process (overview)
Follow the instructions on the
package carefully to avoid
damaging the oven.
The descaling process takes approx.
90 minutes and includes a number of
stages:
Clean the oven interior after
descaling to ensure that all traces of
descaling agent have been
removed.
aPreparing the descaling solution
bDrawing in the descaling solution
cActivation phase
dRinse 1
eRinse 2
fRinse 3
gEvaporating the residual moisture
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Preparation
Start the descaling process.
^ Dissolve one descaling tablet in
^ Select the "Descale" option.
approx. 600 ml of cold tap water.
^ Press the OK sensor to start the
^ Place the universal tray on the top
shelf level to collect the descaling
solution after it has been used.
suction process.
The segment display shows how the
descaling process is progressing. You
can hear the pump during the
descaling process.
A plastic tube (with clip) is supplied
with your oven so that you do not
have to hold the container with the
descaling agent underneath the
water intake tube.
The amount of solution specified can
be more than the amount which is
actually taken in which means that
some of the solution will be left in the
container at the end of descaling. Top
the container up with approx. 300 ml of
water to the container, as the system
will need to draw in some more liquid
during the activation phase.
Once the descaling solution has been
drawn into the appliance
– "Activation phase" will appear in the
display.
The activation phase takes
approx. 60 minutes.
^ Attach the plastic tube to the end of
the water intake tube. Place the other
end in the bottom of the descaling
solution container and secure it to the
container with the clip.
– the time left for the activation phase
will be shown counting down in the
display.
The system will take in more liquid at
approximately five minute intervals. You
will hear the noise of the pump for a
moment or so.
^ Close the door.
The oven lighting and the cooling fan
will remain on during descaling.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
The steam injection system will need to
After the third rinse, residual water will
need to be evaporated from the steam
be cleaned at the end of the
descaling process to remove all traces injection system.
of descaling solution.
Before proceeding, remove the
Prompts to do this will appear in the
display.
plastic tube and the container from
the oven.
Cleaning is carried out by flushing
approx. 1 litre of mains tap water
through the system. The water is
collected in the universal tray. This
process is repeated three times.
The oven will heat up to "Evaporate
residual moisture". The time counts
down in the display.
Allow the oven to cool down before
cleaning by hand. Danger of
burning.
^ Take the universal tray out of the
oven and empty it. Place the tray
back in the oven again at the top
shelf level.
^ Remove the universal tray and empty
it. Clean the oven interior to remove
any condensation and descaling
agent residue.
^ Unclip the plastic tube from the
container. Rinse the container and fill
with approx. one litre of tap water.
Place the container in the oven, insert
the plastic tube and secure it to the
container with the clip.
Leave the oven door open until the
oven interior is completely dry.
^ Start the first rinse.
^ Repeat twice.
Empty the universal tray before the
second and third rinse.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
If you cannot resolve a problem following these instructions please contact Miele
Service.
,Do not attempt to open the appliance casing yourself!
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Problem
Possible cause and remedy
The display is dark. – Check whether the time display is set so that it does not
show in the display (see "Settings - Time (of day)
display").
– Check whether the mains fuse has tripped. If it has not
tripped, contact a qualified electrician or the Miele Ser-
vice Department.
The oven does not – Check if the system lock 0 has been activated.
heat up.
– Check whether the demo programme mode has been
activated (see "Settings - Showroom programme").
– Check whether the mains fuse has tripped. If it has not
tripped, contact a qualified electrician or the Miele Ser-
vice Department.
A noise can be
heard after a
cooking
The cooling fans remain switched on after the end of a
cooking programme (see "Settings - Cooling fan run-on").
programme.
The door cannot be Switch the appliance off. If the door lock will still not open
opened at the end please contact the Miele Service Department.
of a pyrolytic
cleaning
programme.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
The top lighting is
not working.
^ Disconnect the appliance from the electricity supply:
Switch off and unplug at the socket, or disconnect the
fuse, or switch off at the isolator as appropriate.
^ Turn the lamp cover a quarter turn anti-clockwise to release
it and then pull it downwards to take it out.
^ Replace it with a new halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
^ Refit the lamp cover and turn it clockwise to secure it.
^ Reconnect the appliance to the mains electricity supply.
The side lighting is ^ Disconnect the appliance from the electricity supply:
Switch off and unplug at the socket, or disconnect the
fuse, or switch off at the isolator as appropriate.
not working.
^ Remove the shelf runners.
^ Use the lever supplied to release the lamp cover from its
frame.
^ Replace it with a new halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
^ Push the lamp cover back into its retainers, and replace
the shelf runners.
^ Reconnect the appliance to the mains electricity supply.
Cakes and biscuits – Check that the correct temperature has been set.
are not cooked
– Check whether there has been a change to the recipe.
properly after
The addition of more liquid or more eggs makes a
following the times
moister mix which would need longer to cook.
given in the chart.
Cakes and biscuits There will always be a slight unevenness. If browning is
are browning
unevenly.
very uneven check that the correct temperature was set
and that the correct shelf level was used.
With conventional heat V the material and colour of the tin
used plays an important role. Light coloured, shiny tins are
less suitable.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
"Maximum operating Safety switch-off has been activated.
duration reached"
appears in the
display.
The appliance will be ready for use again after it has been
switched off and then back on again.
The oven has
automatically
switched itself off
after a cooking
programme.
The oven switches off automatically to save energy if, at the
end of an Automatic programme or a cooking programme
with Automatic switch-off, no other cooking function is
selected within a certain time period.
The oven is ready for use again when you switch it on.
You can rectify the faults with the following codes yourself:
A fault code
appears in the
display: F + a
number
– Fault 23: The temperature required for pyrolytic cleaning
was not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault message appears again please contact the
Miele Service Department.
– Fault 32: The door has not locked for the pyrolytic
cleaning process.
Switch the oven off and start the pyrolytic cleaning
process again.
If the fault code appears again call the Miele Service
Department.
– Fault 33: The door lock for the pyrolytic cleaning process
will not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the door will still not open please contact
the Miele Service Department.
For all other fault codes please contact the Miele Service
Department.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
After sales service
Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
– your Miele Dealer
or
In the UK, your appliance is guaranteed
for 2 years from the date of purchase.
However, you must activate your cover
by calling 0845 365 6640 or registering
– Miele (see back cover for contact
details).
A call-out charge will be applied for
service visits where the problem
could have been resolved as
described in these instructions.
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance.
This information is given on the data
plate, visible on the front frame of the
oven, with the door fully open.
Please note that telephone calls may
be monitored and recorded for
training purposes.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
A range of additional accessories as well as cleaning and care products are
available for your Miele oven. Depending on product they are available to order
from your Miele Dealer, the Miele Spare Parts Department or via the internet on
FlexiClip telescopic runners
Pizza stone
The pizza stone is ideal for items which
need a well baked base such as pizza,
quiche, bread, bread rolls and savoury
snacks.
Up to 5 pairs of FlexiClip telescopic
runners can be fitted in the oven.
The pizza stone is made from heat
retaining fire brick and is glazed.
Place it directly on the rack.
FlexiClip telescopic runners enable a
shelf to be drawn out to give a good
view of cooking in progress.
A paddle made of untreated wood is
supplied with it for placing food on the
pizza stone and taking it off.
Baking tray, universal tray and rack
These items, supplied with your oven,
are also available to order.
Flan/Pizza dish
When ordering, please quote the model
number of your appliance.
This circular pan is suitable for cooking
pizzas, flat cakes made with yeast or
whisked mixtures, sweet and savoury
tarts, baked desserts, and can also be
used for frozen cakes and pizzas.
The surface has been treated with
PerfectClean enamel.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Gourmet oven dish
Catalytic liners
The gourmet oven dish can be placed
in the oven directly on the runners. It
has non-tip safety notches like the
universal tray to prevent it being pulled
out too far.
Replacement side and roof liners are
available to order if required. Please
quote the model number of your oven
when placing your order.
It has an anti-stick coating.
It is available in two sizes:
Miele E-cloth
– HUB 5000-M (internal dimensions:
approx. 38 x 22 x 8 cm)
Removes grease and stains and leaves
no smearing. Suitable for cleaning
surfaces such as stainless steel, glass,
plastic and chrome without the use of
chemicals.
Miele oven cleaner
– HUB 5000-XL (internal dimensions:
approx. 38 x 35 x 8 cm)
Suitable for removing stubborn soiling.
It is not necessary to pre-heat the oven
beforehand.
Gourmet oven dish lid
When ordering a lid, please specify the
gourmet oven dish it is to be used with
(HUB 5000 M or XL).
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
isolator switch (including switch, fuses
and relays acc. to EN 60 335).
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations (BS
7671 in the UK).
Important U.K.
The appliance is supplied for
connection to a 230-240 V, 50 Hz
supply with a 3-core cable.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
The wires in the mains lead are
coloured in accordance with the
following code:
unauthorised work.
Green/yellow = earth
Blue = neutral
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Brown = live
The voltage and connected load are
given on the data plate, visible below
the oven interior, with the door open.
Ensure that these match the household
mains supply. Please quote these data,
and the model and serial number when
contacting Miele.
WARNING
THIS APPLIANCE MUST BE
EARTHED
Connection of this appliance should be
made via a fused connection unit or a
suitable isolator, which complies with
national and local safety regulations,
and the on/off switch should be easily
accessible after the appliance has
been built in.
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H 05 VV-F or H 05 RR-F with a
suitable cross-sectional area (CSA)
may be used (available from the
Miele Customer Contact Centre).
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to protect
the appliance with a residual current
device (RCD). Please contact a
qualified electrician for advice.
When switched off there must be an
all-pole contact gap of 3 mm in the
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Dimensions are given in "mm".
Appliance and niche dimensions
Installation in a base unit
Installation in a tall unit
* Appliances with glass front
** Appliances with metal front
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Front dimensions
A H 5681: 47.5
H 5688: 45.0
B Appliances with glass front: 2.2
Appliances with metal front: 1.2
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the oven
,The appliance must not be
operated until it has been correctly
installed in its housing unit.
Otherwise it poses an electric shock
hazard.
,Turn off the mains electricity
supply to the isolator.
^ Connect the mains cable from the
oven to the isolator.
It is a good idea to remove the door
before installing the appliance. The
oven will then be lighter to lift when you
are positioning it the housing unit and
also it will not be possible to use the
handle to lift it by mistake.
To ensure adequate ventilation to
the oven once installed:
–
do not fit a rear panel into the
housing unit.
–
make sure that the shelf on
which the appliance is placed
does not touch the wall.
do not fit insulation material
inside the housing unit.
^ Push the appliance back into the
housing unit and align it.
–
^ Open the door (if you have not
removed it previously).
When installing the appliance do not
lift it up by the door handle as this
can damage the door.
^ Use the screws supplied to secure
the appliance to the side walls of the
housing unit through the holes in the
oven trim.
^ Replace the door (if you removed it
before installing the appliance). See
"Cleaning and care - To refit the
door").
82
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 22 / 2611
(H 5681 BP, H 5688 BP)
M.-Nr. 07 652 780 / 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|