Operating and installation instructions
Oven
H 5360 BP, H 5460 BP
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 247 440
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Recommended temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Heating phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Pre-heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Activating moisture reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Entering the duration, start time or finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering a cooking duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering the duration and delaying the start or the finish time. . . . . . . . . . . . . 29
Changing or deleting an entered cooking time . . . . . . . . . . . . . . . . . . . . . . . . 29
Making use of residual heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Minute minder (egg timer). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Clock format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Catalyser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cooling fan run-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Pyrolytic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Heating phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Recommended temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Buzzer tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Temperature format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Appliance front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Baking tray, universal tray, anti-splash insert (if applicable) . . . . . . . . . . . . . . 36
Rack, runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
PerfectClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Oven interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Manual cleaning of the oven interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Pyrolytic cleaning of the oven interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
To remove the oven door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
To dismantle the oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
To refit the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
To remove the runners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
To lower the top heat/grill element. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Building-in diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Appliance dimensions and unit cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Front dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Installing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This appliance is not intended for
~
This appliance conforms to current
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
experience and knowledge, unless they
are supervised whilst using it, or have
been shown how to use it correctly by a
person responsible for their safety.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important notes on
installation, safety, use and
maintenance.
Safety with children
This appliance is not a toy! To
~
prevent the risk of injury or damage do
not let children play with the appliance
or its controls.
Keep these instructions in a safe
place and ensure that new users are
familiar with the contents. Pass them
on to any future owner.
Older children may only use the
~
oven when its operation has been
clearly explained to them and they are
able to use it safely, recognising the
dangers of misuse.
Great care should be taken to
~
Correct application
ensure that children do not touch the
appliance when it is being used.
Children's skin is far more sensitive to
high temperatures than that of adults.
External parts of the oven such as the
door glass, control panel and the vent
become quite hot.
The appliance is intended for
~
domestic use to cook food, and in
particular to bake, roast, grill, cook,
defrost and dry fruit. Any other usage is
at the owner's risk and could be
dangerous. The manufacturer cannot
be held liable for damage resulting
from incorrect or improper use or
operation.
The oven door gets much hotter
~
during pyrolytic operation than during
normal use.
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Before connecting the appliance,
~
make sure that the connection data on
Installation, maintenance and
~
the data plate (voltage and connected
load) match the mains electricity
supply.
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a competent person
if in doubt.
Do not connect the appliance to the
~
mains electricity supply by a multi-
socket unit or an extension lead. These
do not guarantee the required safety of
the appliance (e.g. danger of
overheating).
Before installation, check the
~
appliance for visible signs of damage.
Do not install and use a damaged
appliance. A damaged appliance could
be dangerous.
For safety reasons, this appliance
~
The electrical safety of this
~
may only be used when it has been
built in.
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system. It is
most important that this basic safety
requirement is present and tested
Never open the housing of the
~
appliance.
Tampering with electrical connections
regularly, and where there is any doubt or components and mechanical parts is
the household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
highly dangerous to the user and can
cause operational faults.
While the appliance is under
~
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
During installation, maintenance and Correct use
~
repair work, the appliance must be
disconnected from the mains electricity
supply. It is only completely isolated
from the electricity supply when:
Caution. Danger of burning.
High temperatures are produced by
the oven.
– the mains fuse is disconnected,
Use oven gloves when placing food
~
in the oven, turning or removing it and
when adjusting oven shelves etc. in a
hot oven. Be very careful that you do
not burn yourself on the top heating/grill
element.
– the screw-out fuse is removed (in
countries where this is applicable),
– it is switched off at the isolator.
Ensure that current is not supplied to
the appliance until after maintenance
or repair work has been carried out.
Never leave the appliance
~
unattended when cooking with oil or
fats, as these are a fire hazard if
allowed to overheat.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
Do not exceed the recommended
~
grilling times when using the Full
grill Y, Economy grill Z and Fan
grill \ functions. Excessively long
grilling times can lead to food drying
out and burning, or could even cause it
to catch fire.
If the supply cord is damaged, it
~
must be replaced by a Miele approved
service technician to avoid a hazard.
Do not use the Full grill Y,
~
This appliance may only be used in
~
Economy grill Z or Fan grill \ to
finish baking par-cooked rolls or bread
or to dry flowers or herbs. Fire hazard.
Use Fan plus U or Conventional
heat V instead.
mobile installations such as ships,
caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
If using alcohol in your recipes, high If using a tray made by a different
~
temperatures can cause the alcohol to
vaporise and even to ignite on the hot
heating elements.
manufacturer, make sure that there is a
gap of at least 6 cm between the
bottom of the tray and the floor of the
oven.
Alcohol should be burnt off before the
dish is placed in the oven to avoid this
danger.
Never add cold water to food on a
~
hot universal tray, baking tray or
Cover any food which is left in the
directly onto food in a hot oven. The
~
oven to be kept hot. Any moisture in the steam created could cause serious
food could lead to corrosion damage in burns or scalding and the sudden
the oven. This also prevents the food
from drying out.
change in temperature can damage the
enamel.
If you wish to complete a cooking
Always ensure that food is suitably
~
~
process using the residual heat in the
oven, leave the oven at the function
selected and select the lowest
cooked or reheated.
Some foods may contain micro-
organisms which are only destroyed by
thorough cooking at temperatures over
70°C for a minimum of 10 minutes.
temperature for that function. Do not
switch the appliance off until the food
has been removed. Increased moisture Therefore when cooking or reheating
in the oven could cause condensation
to form which could lead to
foods, e.g. poultry, it is particularly
important that food is fully cooked
through. If in doubt select a longer
cooking or reheating time.
– corrosion inside the oven.
– damage to the control panel, worktop
and surrounding kitchen furniture.
It is important that the heat is allowed to
spread evenly throughout the food
being cooked. This can be achieved
Do not line the floor of the oven with
~
aluminium foil when using Conventional by stirring and/or turning the food
heat V/Bottom heat X/Intensive
bake O.
This would cause a build-up of heat
which could cause damage to the floor
of the oven.
during cooking.
If using plastic containers for
~
cooking, they must be declared by the
manufacturer as being suitable for use
in an oven. Other types of plastic
containers melt at high temperatures,
and could damage the oven.
For this reason do not place a dish, tin
or baking tray directly on the oven floor.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not heat up unopened tins or jars
Only use the Miele food probe
~
~
of food in the oven. Pressure can build
supplied with this oven. If a
up and they may explode, resulting in
injury or damage.
replacement is necessary it can be
obtained from the Miele Spare Parts
Department or your Miele Dealer.
Do not push pots and pans around
~
on the oven floor, as this could damage
the surface.
When not in use do not leave the
~
food probe in the oven, especially when
grilling.
Do not lean or sit on an open oven
~
The high temperatures used for grilling
could cause plastic components on the
food probe to melt.
door, or place heavy items on it. Make
sure that nothing gets trapped between
the door and the oven compartment.
This could damage the oven.
The oven door can support a maximum
load of 15 kg.
The manufacturer cannot be held
liable for damage caused by non-
compliance with these Warning and
safety instructions.
Do not use the appliance to heat up
~
the room. Due to the high temperatures
radiated, objects near the appliance
could catch fire.
Accessories
Only use genuine Miele spare parts
~
and accessories with this appliance. If
spare parts or accessories from other
manufacturers are used, this will
invalidate the guarantee, and Miele
cannot accept liability.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposing of your old
appliance
The transport and protective packing
Electrical and electronic appliances
has been selected from materials which often contain materials which, if
are environmentally friendly for
disposal, and can normally be
recycled.
handled or disposed of incorrectly
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
It should be unplugged or disconnected
from the mains electricity supply be a
competent person.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
H 5360 BP, H 5460 BP
aFunction selector, retractable when it is at "0"
bDisplay
cSensors ?, OK, ;, N
dTemperature selector, retractable
eDoor lock for pyrolytic operation
fTop heat/grill element
gBack panel with air inlet for the fan
hSide runners with five shelf levels
iConnection socket for the food probe
jDoor
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Oven controls
Cooling fan
In addition to operating the various
cooking programmes to bake, roast
and grill the controls also offer the
following:
A cooling fan will come on
automatically when a cooking
programme is started. The cooling fan
mixes hot air from the oven cavity with
cool room air before venting it out into
the kitchen through vents located
between the appliance door and the
control panel.
– a time of day display,
– a minute minder,
– a timer to automatically switch
cooking programmes on and off,
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
– Automatic programmes
– settings that can be customised.
Safety features
Door lock for pyrolytic operation
System lock
For safety reasons the door is locked as
soon as the pyrolytic cleaning
programme is started. After the
pyrolytic programme has finished, the
door will remain locked until the
temperature in the oven has fallen
below 280°C.
The system lock 0 prevents the oven
from being used unintentionally by
children, for example. See "System
lock".
Safety switch-off
Safety switch-off is triggered
Pyrolytic cleaning
automatically if the oven is operated for
an unusually long period of time.
The oven interior can be kept clean by
using the Pyrolytic function.
The period of time will depend on the
particular oven function being used.
The oven will switch off automatically
and "Fault 55" will appear in the display.
The oven can be used again immedi-
ately after switching it off and back on.
The oven interior is heated up to
approx. 460 °C. Any residual soiling is
broken down and reduced to ash by
the high temperatures.
See "Cleaning and care" for more
information.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
PerfectClean treated surfaces
Information about the
Automatic programmes,
The following surfaces are all treated
with a special PerfectClean finish:
– Runners,
baking, roasting, grilling ...
The "User instructions" booklet,
supplied with your appliance in addition
to these Operating and installation
instructions, contains detailed
information about the following:
– Automatic programmes
– Food probe
– Baking tray,
– Universal tray, anti-splash insert and
– Rack
PerfectClean surfaces have very good
anti-stick properties and are much
easier to keep clean than conventional
enamel, if cleaned regularly.
– Baking
See "Cleaning and care" for more
information.
– Roasting
– Slow cooking
– Grilling
– Defrosting
Door contact switch
– Cooking ready meals
– Automatic programme recipes
If the door is opened during operation,
the door contact switch automatically
switches off the heating elements, and
the fan if a "Fan" setting is being used.
Energy efficiency rating
according to EN 50304
This helps reduce the amount of heat
lost from the oven interior, e.g. when
checking food.
This appliance is rated energy
efficiency class A in accordance with
EN 50304. Tests were carried out using
“Fan plus U”. The catalyser should be
switched off during testing, see
Vented oven door
The oven door is an open system and
the door panes have a heat-reflecting
coating. During operation, cool air is
passed through the oven door to keep
the outer pane cool.
“Settings – Catalyser – Off once”.
If necessary, the oven door can be
dismantled for cleaning.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Accessories
Anti-splash insert
The following accessories are supplied
with this oven.
(depending on model)
These and other accessories are also
available to order from the Miele Spare
Parts Department, your Dealer or via
Baking tray, universal tray and rack
The anti-splash insert should be placed
in the universal tray when grilling or
roasting.
The juices from the food being cooked
collect under the anti-splash tray. This
prevents them from spitting and making
the oven dirty. The juices can then be
used for making gravy and sauces.
The baking tray, universal tray and rack
are inserted into the oven between the
two rails of a shelf runner.
Handle
(depending on model)
The trays and rack have non-tip safety
notches in the middle which prevent
them being pulled right out when they
only need to be partially pulled out.
The trays and rack can then only be
taken out of the oven by raising them
upwards and then pulling them out.
The handle makes it easier to take the
universal tray, baking tray and rack out
of the oven, or to put them into it. The
two prongs at the top go inside the tray
or above the rack and the U-shaped
supports underneath.
If you are using a tray with the rack on
top, insert the tray between the rails of
a shelf runner and the rack will sit on
top of it.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Food probe
Using the food probe enables the
roasting process to be monitored
simply and reliably.
Please refer to the separate "User
instructions" booklet supplied with the
oven for information on how to use the
food probe.
Opener
This opener is used to remove the
cover of the lighting in the sides of the
oven.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Function selector
The left-hand control is used to select the function.
It can be turned clockwise or anti-clockwise.
The function selector can only be retracted when it is at "0".
U Fan plus
c Automatic
\ Fan grill
O Intensive bake
[ Auto roast
P Defrost
V Conventional heat
X Bottom heat
Y Full grill
Z Economy grill
^ Pyrolytic: cleaning function
T Lighting:
For switching on the oven light independently. This is useful when cleaning the
oven. It also works with the door removed.
%
Settings:
From this position you can also alter the settings of the appliance.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Temperature selector
The right-hand dial V 6 W is used to select the temperature.
It can be turned clockwise or anti-clockwise.
It can be retracted in any position.
Sensors
The sensors underneath the display react to touch.
A keypad tone sounds each time a sensor is touched.
Use
OK – For calling up the list of options.
– For confirming an entry.
?
;
N
– For scrolling down the list of options.
– For decreasing time entries, brightness, contrast, ...
– For scrolling up the list of options.
– For increasing time entries, brightness, contrast, ...
For entering a minute minder time, e.g. for boiling eggs.
Keypad tone
The volume of the keypad tone is set to medium. You can change the volume of
the keypad tone in the Settings menu, see "Settings - Volume - Keypad tone".
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Display
All information about functions, temperature, cooking durations, Automatic
programmes and settings is shown in the display.
The following Information windows or list of options appear in the display
depending on the position of the function selector and/or confirmation with the OK
sensor:
Position of
the function
selector
When the OK sensor is touched, the following appears
0
: Information window
Cooking programme list:
– Duration
Function
(does not
apply to %
or c)
– Finish
– Start time
– Moist. reduction
Settings list:
%
– Language!
– Time of day
– Lighting
– Catalyser
– Cooling fan run-on
– Pyrolytic
– Heating phase
– Recommended temperature
– Display
– Volume
– Safety
– Temperature format
– Showroom programme
– Factory default
c
List of the Automatic programmes available.
Please refer to the separate "User instructions" booklet supplied
with your oven in addition to these Operating instructions for
more information.
^ Use the ; or ? sensors to scroll through the list until the option you want is
highlighted.
^ Then select the option with the OK sensor.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
The following Symbols can appear in addition to the text:
Symbol
T
Meaning
Duration
R
Start time
S
Finish
N
Minute minder (egg timer)
Core temperature when using the food probe
Q
Arrows will appear if there are more than two options available.
;
,
Use the ; or ? sensors to scroll through the list.
Z Z Z Z Z Z Z
The end of a list is indicated by a dotted line.
Back # Confirming with OK returns you to the original list of options.
(
:
A tick will appear beside the option which is currently selected.
This indicates additional information that is available.
This information window can be deleted by selecting OK.
0
System lock
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Your oven has a range of oven functions for preparing a wide variety of recipes.
Functions
Notes
V Conventional – For baking traditional recipes, e.g. fruit cake, casseroles.
heat
– Also ideal for soufflés.
– If using an older recipe or cookbook, set the oven
temperature for Conventional heat 10°C lower than that
recommended.
The cooking duration does not need to be changed.
X Bottom heat – Use this setting towards the end of baking, to brown the
base of a cake, quiche or pizza.
Y Full grill
– For grilling larger quantities of thin cuts (e.g. steaks).
– For browning food in larger dishes.
Z Economy
grill
– For grilling smaller quantities of thin cuts (e.g. steaks).
– For browning food in smaller dishes.
P Defrost
– For the gentle defrosting of frozen food.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Function
Notes
U Fan plus
– For baking and roasting.
– You can bake and roast on different levels at the same
time.
– Lower temperatures can be used than with "Conventional
heat V" as the Fan plus system distributes the heated air
around the food.
c Automatic
– The list of Automatic programmes available will appear in
the display.
[ Auto roast
You will find this function in the list of Automatic
programmes.
– For roasting.
During the searing phase, the oven is heated up to a high
temperature (230 °C) to sear the meat.
Once this temperature has been reached, the temperature
of the oven is automatically lowered to the set cooking
temperature (continued roasting temperature).
\ Fan grill
– For grilling larger items, e.g. rolled meat, poultry.
– The hot air from the grill is distributed over the food by the
fan. This enables a lower temperature to be selected than
when using "Full grill Y"/"Economy grill Z".
O Intensive
bake
– For cooking dishes which require a moist topping and a
crisp base such as pizza and quiche lorraine.
– Intensive bake is not suitable for baking thin biscuits etc. or
for roasting as the juices will become too dark.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To enter the basic settings
Setting the time
The oven will switch on automatically
when it is connected to the electricity
supply.
You will then be asked to enter the time
of day. The hour is highlighted.
^ Set the hour with the ; or ? sensor
and confirm your setting with the OK
sensor.
Welcome screen
A welcome screen will appear in the
display, and you will then be requested
to select some basic settings which are
needed before the appliance can be
used.
The minutes are then highlighted.
^ Set the minutes with the ; or ?
sensor and confirm your setting with
the OK sensor.
Follow the instructions in the display.
Time of day display
You will then be asked when you want
the time of day to show in the display:
Setting the language
The welcome screen will be replaced
by the request to set a language:
– On
The time is always visible in the
display.
^ Use the ; or ? sensor to scroll
through the list until the language you
want appears highlighted in the
display.
– On for 60 seconds
When a sensor is touched the time
will only appear for 60 seconds.
^ Confirm your selection with the OK
sensor.
^ Use the ; or ? sensor to select the
setting you want and confirm with the
OK sensor.
A tick L will appear beside the
language you have selected.
The oven is now ready for use.
Clock format
If you have selected the wrong
language by mistake proceed as
described in "Settings - Language"
to get back to the correct language.
The request to select a Clock format will
appear. The default setting for the clock
is 24 h.
^ Touch the ; or ? sensor until the
clock format you want appears
highlighted in the display.
^ Confirm with OK sensor.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Cleaning and heating up for
the first time
The oven will start heating up as soon
as this entry has been accepted.
^ Heat the empty oven for at least an
hour.
Before use, please remove
–
–
any stickers from the floor of the
oven, baking tray, universal tray
etc.
Please ensure the ktichen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
any protective foil from the
oven front.
See "Cleaning and care" for more
information.
This procedure can be set up to switch
itself off automatically. See "Operation -
Entering duration, start time or finish".
Before using the oven for the first time
– take all accessories out of the oven
^ Leave the appliance to cool down to
room temperature.
and wash them.
– then heat the oven up once with
nothing in it. New ovens can give off
a slight smell on first use. Doing this
will dissipate the smells before you
use it to cook food.
^ Then wipe the oven interior out with a
solution of hot water and a mild
detergent and then dry it thoroughly
with a soft clean cloth.
^ Before heating the oven up it is a
good idea to wipe the interior out with
a damp cloth. This way any dust or
bits of packaging that may have
accumulated in the oven cavity
during storage and unpacking will be
removed.
Leave the oven door open until the
oven interior is completely dry.
^ Press and release the function
selector and the temperature
selector.
^ Use the function selector to select
"Fan plus U".
The recommended temperature of
160 °C will appear.
^ Use the temperature selector to set
the highest temperature (250 °C).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
To use an Automatic
programme
Depending on the programme you
have selected, further information or
prompts will appear regarding
Your oven has a wide range of Auto-
matic programmes to enable you to
achieve excellent results with ease.
– the roasting or baking dish,
– the shelf level,
The Automatic programmes available
will appear when you select the "Auto-
matic c" function.
– the use of the food probe,
– the cooking duration.
Please refer to the "User instructions"
booklet supplied with your oven for
more information on the Automatic
programmes and a selection of recipes.
The main list will appear in the display:
– Slow cooking
– Cakes
– Baked goods
– Bread
– Bread mixtures
– Bread rolls
– Pizza
– Meat
– Poultry
– Fish
– Bakes/gratin
– Frozen food
Each of the above Automatic
programmes has a sub-menu of further
options.
Each step you need to take before
starting the Automatic programme will
appear in the display.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Manual operation
Cooling fan
If you do not want to use an Automatic
programme you can enter the settings
for a cooking programme manually.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
^ Place the food in the oven.
^ Select the function you want (e.g. Fan
plus U).
When the temperature in the oven has
fallen sufficiently, the cooling fan will
The following will appear in the display: switch off automatically.
– Fan plus
The cooling fan can be set to switch off
after a specific time, see "Settings -
Cooling fan".
– "160" - the recommended
temperature,
– the words "Heating phase".
At the same time the oven compartment
heating, lighting and cooling fan will
switch on.
The lighting switches off automatically
after approx. 15 seconds. If you wish,
you can set the lighting to be on all the
time, see "Settings - Lighting".
You can follow the temperature rising in
the display. When the set temperature
has been reached, "Heating phase" will
disappear from the display.
^ At the end of the programme, turn the
function selector to "0" and remove
the food from the oven.
^ If you touch the OK sensor during a
cooking programme, the duration,
start time, finish and moisture
reduction options will appear. See
"Operation - Entering duration, start
time or finish" for more information.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Recommended temperature
Changing the temperature
As soon as a cooking function is
selected, the recommended
If the recommended temperature is not
suitable, you can use the temperature
selector to change it.
temperature will appear in the display.
As soon as you turn the temperature
selector, the temperature range for that
function will appear in the display. The
temperature can be changed in
increments of 5°.
Function
Recommend
ed
temperature
U
O
V
Fan plus
160 °C
170 °C
180 °C
Intensive bake
You can also change the
recommended temperature for a
function permanently if you wish, see
"Settings - Recommended
temperature".
Conventional
heat
X
\
Y
Z
P
[
Bottom heat
Fan grill
190 °C
200 °C
240 °C
240 °C
25 °C
Full grill
Heating phase
Economy grill
Defrost
"Heating phase" will appear in the
display until the set temperature has
been reached for the first time.
Auto roast*
160 °C
* The initial searing phase temperature
is approx. 230°C. This then drops to
160 °C for continued roasting
All the heating elements come on
together with the fan to enable the
required temperature to be reached as
quickly as possible (factory default
setting).
You can alter this default setting, if
wished. See "Settings - Heating phase".
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Pre-heating
Activating moisture reduction
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating
phase.
It is a good idea to use this function
when cooking items which are moist on
the inside but which should be crispy
on the outside, e.g. frozen chips,
It is only necessary to pre-heat the oven croquettes or pork with crackling.
in a few instances:
It is also suitable for deep filled fresh
With Fan plus
fruit cakes, such as plum or apple
cake.
– pre-heating may be necessary for
foods which cook in less than 20
minutes and for foods such as puff
pastry and yeast mixtures where
instant heat is required to make them
rise quickly.
You can activate Moisture reduction
with any function.
For best results, activate it at the
beginning of the cooking
programme.
– roasting beef/fillet.
^ Place the food in the oven.
With Conventional heat
^ Select the required function and set
the temperature.
– it is usually necessary to pre-heat the
oven.
^ Touch the OK sensor.
Change the setting for the heating
phase from "Rapid" to "Normal" when
baking pizza or biscuits and small
cakes. As otherwise they will brown
too quickly from the top. See
The list of options will show in the
display.
^ Use the ; or ? sensor to highlight
"Moist. reduction" and select it with
the OK sensor.
"Changing settings - Heating phase".
^ Use the ; or ? sensors to select
"On" and confirm your selection with
the OK sensor.
To pre-heat the oven:
^ Select the required function and set
the temperature.
The Moisture reduction function
needs to be activated individually for
each cooking programme.
^ Place the food in the oven once
"Heating phase" has disappeared
from the display for the first time as
the set temperature has now been
reached.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Entering the duration, start
time or finish
Entering a cooking duration
^ Select the function you want and set
a temperature.
You can programme the oven to switch
off automatically or on and off
automatically by entering the duration,
start time or finish time.
The oven heating, lighting and cooling
fan will switch on.
^ Touch the OK sensor.
The maximum duration which can be
set is 9 hours and 59 minutes.
A list of options will appear:
– Duration
We recommend using automatic
– Start time
switching on and off when roasting.
However, do not delay the start for too
long when baking as the cake mixture
or dough will dry out, and the raising
agents will lose their effectiveness.
– Finish
– Moist. reduction
^ Use the ; or ? sensor to scroll
through the list until "Duration" is
highlighted.
^ Touch the OK sensor.
"-:- -" will appear in the display.
^ Use the ; or ? sensor to enter the
duration.
You can follow the duration counting
down in the display.
The oven will switch itself off
automatically at the end of the cooking
duration.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Entering the duration and delaying
the start or the finish time
Changing or deleting an entered
cooking time
You can set the Start time and Finish to
specify when you want cooking to start
or finish.
^ Touch the OK sensor.
^ Use the ; or ? sensor to highlight
the duration, start time or finish time
and select it with the OK sensor.
To switch a programme on and off
automatically you can either:
^ Use the ; or ? sensor to set the time
to "-:- -".
– Enter the Duration and Finish time, or
– Enter the Start time and the Duration.
The time which has not been entered is If there is a power cut, all data entered
calculated automatically.
will be deleted.
The Start time will be shown in the
display up until the heating elements
are switched on.
Making use of residual heat
The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
During the course of the programme
you can follow the Time left counting
down in the display.
At the end of the programme the
Using the residual heat in the oven
saves energy.
message "Prog. finished" will appear in
the display and the buzzer will sound.
"Use residual heat" will appear in the
display to show that the oven is in
energy save mode. The current core
temperature of the food will no longer
be shown.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting has
been chosen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Minute minder (egg timer)
The minute minder can be used to time To cancel the time set for the
any activity in the kitchen, e.g. boiling
minute minder
eggs.
^ Touch the N sensor.
You can enter a time of up to a
The minute minder time will be deleted.
maximum of 9 hours and 59 minutes.
You can set the minute minder at the
same time as another timed
programme, e.g. as a reminder to stir a
dish or add seasoning etc.
To set the minute minder
^ Touch the N sensor.
^ "-:- -" will appear in the display.
^ Use the ; or ? sensor to enter the
duration.
You will then see the minute minder
time counting down in the display.
At the end of the time set for the minute
minder
– the N symbol will flash.
– a buzzer will sound, if it is switched
on (see "Settings - Volume").
– at the end of the minute minder time,
the display will show the time
counting upwards.
^ Touch the N sensor.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Your appliance is supplied with a
number of standard default settings.
Language J
You can set the language you want the
display to appear in. After selecting
and confirming "Language", the
To change these, proceed as follows:
^ Select "Settings %".
language you have selected will appear
A list of settings which can be changed in the display.
will appear in the display.
If you have selected the wrong
^ Use the ; or ? sensor to scroll
through the list until the setting you
want appears highlighted in the
display.
language by mistake, you can follow
the flag symbol J to get back to the
Language menu.
^ Select the setting with the OK sensor.
^ Use the ; or ? sensor to select the
setting you want and confirm with the
OK sensor.
Time of day
Display
Settings which are currently selected
Select how you want the time of day to
show in the display:
are marked with a L.
If you do not make another selection
within approx. 15 seconds after
selecting a setting, the display will
return to the Settings list.
– On
The time is always visible in the
display.
– On for 60 seconds
When a sensor is touched the time
will only appear for 60 seconds.
– Do not display
The time of day will not be displayed
when the oven is switched off. It will
only show in the display when the
oven is being operated.
Clock format
The time of day can be altered from a
24-hour display to a 12-hour display.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Setting the time of day
Cooling fan run-on
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
You cannot set the time of day while
a cooking programme is in progress.
^ Set the hour with the ; or ? sensor
and confirm your setting with the OK
sensor.
You can set the cooling fan to switch off
either when the temperature in the oven
is below approx. 70°C, or after a period
of approx. 25 minutes.
^ Then set the minutes with the ; or ?
sensor and confirm your setting with
the OK sensor.
If there is a power cut, the current time
of day will reappear once power has
been restored. The appliance will store
this data for approx. 200 hours. After
200 hours it will show "0:00" and will
need to be re-set.
Do not leave food in the oven to
keep it warm if you have set the
cooling fan to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Lighting
The oven interior lighting can be set so
that it that it stays on throughout
Condensate can
cooking or goes out 15 seconds after a
cooking programme has started.
–
damage the housing unit/
worktop.
lead to corrosion in the oven.
–
If the you have set the lighting to go out
15 seconds after a cooking programme
has started, it will switch on again for 15
seconds when one of the sensors is
touched.
Catalyser
The oven is delivered with the catalyser
engaged for all functions.
If the catalyser is set to:
– "On"
it will work with all functions.
– "Off once"
it will not come on during the next
programme.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Pyrolytic
Display
A message will appear in the display
after a certain length of time to remind
you to run a pyrolytic cleaning
programme. You can disable this
message if you do not wish to be
reminded. Confirm the option "Without
reminder".
You can change the contrast or
brightness of the display with the ; or
? sensors.
The setting is represented by a bar with
seven segments. The middle setting is
displayed by a filled-out segment in the
middle of the bar.
NH H H TTTTT H H HN
Heating phase
To change the setting, move the filled-
out segment to the left or right.
The heating phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
Volume
– "Rapid"
All the heating elements are switched
on together in order to heat the oven
up as quickly as possible to the
required temperature.
Buzzer tones
You can change the volume of the
buzzer by using the ; or ? sensor to
move the filled-out segment to the left
or right. If none of the segments is
filled-out, all buzzers are switched off.
– "Normal"
Only the heating elements for the
cooking function selected are
switched on.
Keypad tone
You can change the volume of the
keypad tone which sounds each time a
sensor is touched, by using the ; or ?
sensor to move the filled-out segment
to the left or right. If none of the
segments is filled-out, the keypad tone
is switched off.
Recommended temperature
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
^ Select the function you want and
change the temperature within the
range allowed.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Safety
Showroom programme
This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.
Do not activate this setting for domestic
use!
The oven is delivered with the system
lock deactivated (factory default
setting).
The system lock prevents the oven
being switched on unintentionally, by
children for example.
A message will appear briefly in the
display when you call up this option.
Demo mode can then be activated or
deactivated.
Selecting "On" activates the system
lock. When the oven is switched off, the
0 symbol will show in the display.
If you turn the function selector to a
function, a message will appear to tell
you that the system lock is activated.
The minute minder can still be used
whilst the lock is on.
Factory default
If you select
– "All settings"
any settings that you have altered will
be reset to the factory default setting.
To deactivate the lock, select and
confirm "Off".
– "Recommended temperature"
recommended temperatures which
have been changed will be reset to
the factory default settings.
Temperature format
You can choose for the temperature to
be shown in °C or °F.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts Department
shop.com.
The external surfaces are
susceptible to scratching. Scratches
on glass surfaces could even cause
a breakage in certain
circumstances.
,Do not use a steam cleaner to
clean the appliance. The steam
could reach electrical components
and cause a short circuit.
Contact with unsuitable cleaning
agents can alter or discolour the
external surfaces.
To prevent damage to your appliance
when cleaning, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
Appliance front
– cleaning agents containing
descaling agents,
Remove any soiling immediately.
If not, it might become impossible to
remove and could cause the surface
to alter or discolour.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Clean the front using a damp Miele
microfibre E-cloth or with a clean
sponge and a solution of hot water and
washing-up liquid. Wipe dry using a
soft cloth.
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– sharp metal scrapers.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Accessories
Remove all accessories as well as
the runners and any extra
accessories such as FlexiClip
runners from the oven interior before
starting the pyrolytic cleaning
process.
The high temperatures needed for
pyrolysis will damage the
accessories.
Baking tray, universal tray, anti-
splash insert (if applicable)
The surface has been treated with
PerfectClean enamel.
Please refer to the section on
"PerfectClean" for information on
cleaning and care.
Rack, runners
The surface has been treated with
PerfectClean enamel.
Treat in the same way as other surfaces
coated with PerfectClean. See
"PerfectClean".
Food probe
Clean the food probe with a damp cloth
only.
Do not put the food probe into water
or clean it in the dishwasher.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
PerfectClean
Normal soiling
Clean as soon as possible after each
use with a dishcloth, soft sponge or a
soft nylon brush, and a solution of hot
water and a little washing-up liquid. The
longer soiling is left, the harder it may
become to remove.
Before using for the first time remove
any stickers from PerfectClean
surfaces.
The enamelled surfaces of the baking
tray, universal tray and anti-splash
insert (if applicable) have been treated
with a special type of enamelling called
"PerfectClean".
Stubborn soiling
Stubborn soiling, e.g. from roasting,
may need to be soaked first with a
damp sponge to loosen it and if
necessary a non-abrasive stainless
steel spiral pad or a scraper suitable for
glass can be used to remove it.
This surface has very good anti-stick
properties and is much easier to keep
clean than conventional oven enamel, if
cleaned regularly.
Food can be taken off it more easily,
and soiling from baking and roasting is
easier to remove.
After cleaning, rinse thoroughly with
clean water. The water must run off
the surface easily. Any residual
cleaning agents will hinder this
effect.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
PerfectClean last for many years.
Using oven sprays on very stubborn
soiling
PerfectClean surfaces can be treated
as you would treat glass.
Food can be sliced or cut up on the
PerfectClean surface in the same way
as on a baking tray with conventional
enamel.
Some oven cleaners contain strong
alkalines and / or abrasive materials.
Because PerfectClean enamel is
designed to be easily cleaned, the use
of these cleaners is not recommended.
However, if you still cannot get the
surface clean, an oven cleaner can be
used, but for a couple of minutes only.
Allow the oven and any accessories
to cool down before cleaning.
Danger of burning.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Do not attempt to use on a hot oven or
accessories. Allow the PerfectClean
surfaces to cool down to room
temperature before applying an oven
spray.
The following cause lasting damage
to the surface structure and reduce
the anti-stick effect and must not be
used on PerfectClean surfaces:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Apply a spray oven cleaner to the
soiled areas. Leave to take effect for a
couple of minutes only!
– cleaning agents for ceramic hobs,
– wire wool or metal scourers,
If necessary use a soft sponge, soft
nylon brush or a scraper suitable for
glass surfaces to loosen the soiling.
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
Repeat the process if necessary.
After cleaning, rinse thoroughly with
clean water and then dry thoroughly.
– oven spray must not be used in a hot
oven or left on for too long,
For optimum performance of
PerfectClean enamel it is important to
clean the oven and accessories after
each use.
– PerfectClean enamelled items must
not be washed in a dishwasher.
Note:
The surfaces will become harder to
clean and the anti-stick properties will
deteriorate if soiling is not removed
after each use and allowed to build up.
In extreme cases cleaning may
become impossible.
– Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Exercise
caution, make sure the oven is not
too hot - danger of burning.
– Spilt fruit juices may cause lasting
discolouration to the surfaces and
roasting can cause matt areas to
appear. Clean these following the
instructions given above and do not
use force to remove them. This
discolouration is permanent but will
not affect the efficiency of the
enamel.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Oven interior
Most cooking residues can be removed
with a damp cloth and a mild solution of
hot water and washing-up liquid.
The oven interior is coated with dark
pyrolytic enamel which facilitates
cleaning.
Never use hard brushes, hard
sponges, wire wool pads*, knives or
any other abrasive materials or
cleaning agents. They can damage
the enamel.
This is a particularly hard enamel with
an extremely smooth surface and very
good anti-stick properties.
Manual cleaning of the oven interior
If using an oven spray, the
manufacturer's instructions must be
followed.
Allow the oven to cool down before
cleaning by hand.
Danger of burning!
* Non-abrasive stainless steel spiral
pads can, however, be used.
The oven interior and the inside of
the door should be cleaned after
each use. If this is not done
To make cleaning easier
subsequent soiling from baking and
roasting will become worse and
make cleaning harder. In extreme
cases, heavy soiling could even
damage the surface.
– remove the oven door,
– dismantle the door,
– take out the side runners,
– lower the top heating/grill element.
Instructions for doing so are given
further on in this section.
There is a fibre-glass door seal
around the oven cavity.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing it
can damage it.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Pyrolytic cleaning of the oven
interior
During the pyrolytic process the oven is
heated to approx. 460 °C . Any residual
soiling is burnt off by the high
temperatures.
A message will appear in the display
after a certain length of time to remind
you to run a pyrolytic cleaning
Depending on soiling levels you can
choose between three cleaning
programmes:
programme. You can deactivate this, if
wished (see "Settings - Pyrolytic").
Before starting a pyrolytic cleaning
process please note the following:
– Level 1 (Duration approx.
2 hours 15 minutes)
– Level 2 (Duration approx.
2 hours 25 minutes)
Remove any coarse soiling from the
oven before you start.
– Level 3 (Duration approx.
2 hours 35 minutes)
There is a fibre-glass door seal
around the oven cavity.
For safety reasons the oven door is
automatically locked at the beginning
of the pyrolytic programme.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing can
damage it.
At the end of the programme it will not
be unlocked until the temperature
inside the oven has dropped to below
280 °C.
Remove all accessories as well as
the runners and any extra
accessories, such as the FlexiClip
runners, from the oven interior
before starting the pyrolytic cleaning
process. The high temperatures
needed for pyrolysis will damage the
accessories.
If the pyrolitic cleaning programme has
been started by mistake or if the
process is interrupted, the door lock will
be released:
– immediately if the temperature is
below 280 °C.
The oven door gets much hotter
during pyrolytic operation than
during normal use.
– not until the oven interior temperature
is below 280 °C if the temperature
inside the oven is higher than
280 °C.
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
You can delay the start of the pyrolytic
process for example, to take advantage
of cheaper night electricity tarifs.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Starting a pyrolytic process
This reminder continues for up to
30 minutes.
^ Take all accessories out of the oven.
After the pyrolytic process, any
debris (e.g, ash), can easily be wiped
away.
^ Turn the function selector to
Pyrolytic ^.
^ Use the ; or ? sensor to select
Level 1, 2 or 3.
Remember to wait until the oven has
cooled down before doing so!
Danger of burning.
^ Start the pyrolytic process required
with the OK sensor.
You can either start the pyrolytic
Try not to wipe over the fibre-glass
seal when cleaning the oven cavity.
It is particularly sensitive and should
not be cleaned unless absolutely
necessary. Rubbing it can damage
it.
cleaning process immediately or later.
If you start the process immediately, the
door will lock and the oven will start
heating up.
Select the "Start later" option to delay
the start of the pyrolytic process for
example, to take advantage of cheaper
night electricity tarifs.
Most residues are easily wiped away
with a damp cloth.
Depending on soiling levels in the oven
there may be visible deposits on the
door and below the trim under the oven
cavity. This is best removed using a
non-abrasive sponge or non-abrasive
stainless steel spiral pad and a mild
solution of warm water and washing-up
liquid.
You can change the time you want the
pyrolytic process to start at, at any
point up until the delay period has
elapsed.
At the end of pyrolytic cleaning
process
– "Prog. finished" will appear in the
display.
Deposits on the internal door panel can
be removed using a suitable glass
scraper.
– a buzzer will sound, if it is switched
on (see "Settings - Volume - Buzzer
tones").
Spilt fruit juices may cause lasting
discolouration to the surfaces. This
discolouration is permanent but will
not affect the efficiency of the
enamel. Do not attempt to remove
these marks.
^ Turn the function selector to "0".
The buzzer will stop and the symbols in
the display will go out.
If the function selector is not moved, the
buzzer (if switched on) will sound every
five minutes as a reminder that the
programme has finished.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
The pyrolytic process will be
cancelled,
– if the oven is switched off.
– if another function is selected during
the pyrolytic process.
– in the event of a power cut.
In the two instances above, switch the
oven off.
If the oven interior temperature is below
280 °C, the door lock will be released
after a short while. It can then be
opened.
Start the pyrolytic cleaning process
again if necessary.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the oven door
^ Then lift the door upwards as far as it
will go.
The oven door is connected to the oven
by hinges.
Do not attempt to take the door off
the hinge guides when it is in a
horizontal position. The guides will
close, and damage the appliance.
Danger of injury.
Before removing the door, the locking
clamps on both hinges have to be
released.
^ Open the door fully.
^ Hold the door securely at both sides
and lift upwards off the hinge guides.
Do not lift the door off by the handle.
The handle could break and
damage the door.
^ To release the locking clamps on the
hinges turn them upwards as far as
they will go until they are at an angle.
See illustration.
Make sure that you lift the door off
equally on both sides.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To dismantle the oven door
Always remove the oven door before
dismantling it.
The oven door is made up of four
panes of glass and has vents at the top
and bottom.
^ Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
When the oven is operating, air is
circulated through the door to keep the
outer pane cool.
If condensate has worked its way in
between the glass panes, the door can
be dismantled in order to clean in
between the panes.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface. Scratches can
cause the glass to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
^ Flip the glass pane retainers
outwards to open them.
Ensure that the glass panes are
inserted the correct way round after
cleaning as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a towel).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
You can now remove the inner and the
two middle panes.
^ Gently lift up the lower of the two
middle panes and remove it.
^ Clean the glass panes and other
parts with a Miele E-cloth or a clean
sponge and a solution of hot water
with a little washing-up liquid. Wipe
dry using a soft cloth.
^ Gently lift the inner pane up and out
of the cover strip.
^ To refit the door:
The two middle panes are identical.
To ensure that they are refitted
correctly, one of the corners is more
angled than the others.
^ Now gently lift up the upper of the
two middle panes and remove it.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
When refitting the lower pane, the
more angled corner must be
inserted in the left hand retainer at
the bottom.
^ Push the inner pane into the plastic
strip and insert it in the retainers.
^ Replace the first of the middle panes.
The more angled corner must be at
the bottom left.
When refitting the upper pane, the
more angled corner must be
inserted at the top left.
^ Flip the glass pane retainers inwards
to close them.
^ Replace the second of the middle
panes with the more angled corner at
the top left.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To refit the door
^ Open the door fully.
^ Flip both locking clamps back up as
far as they will go into a horizontal
position.
It is essential that the locking clamps
are flipped down when the door is
refitted after cleaning. Otherwise the
hinges could work loose, resulting in
damage to the door.
^ Hold the door securely at both sides
and carefully fit it back onto the hinge
guides.
Make sure that the door goes back
on straight.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the runners
To lower the top heat/grill
element
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
^ Remove the runners.
^ Pull the runners forwards out of the
holder and remove.
^ Unscrew the wing nut and lower the
top heating element.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
Do not use force to pull it down as
this can cause the element to break.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
,Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Ensure current is not supplied until after maintenance or repair work has been
carried out.
Problem
Possible cause and remedy
The oven does not – Check if the system lock has been activated.
heat up.
– Check whether the demo mode has been activated (see
"Settings - Showroom programme").
– Check whether the mains fuse has tripped. If it has,
contact a qualified electrician or Miele.
The halogen lamp Light in the roof:
needs replacing.
^ Disconnect the appliance from the electricity supply.
Switch off and unplug at the socket, or remove the fuse,
or switch off at the isolator as appropriate.
^ Unscrew the lamp cover and the seal.
^ Change the halogen lamp.
When purchasing a new lamp, take the old one with you
to make sure you obtain the correct replacement (Osram
66275, 230 V, 25 W, G9, heat resistant to 300 °C).
^ Screw the lamp cover and the seal back on again.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
The halogen lamp Light in the side wall:
needs replacing.
^ Disconnect the appliance from the electricity supply.
Switch off and unplug at the socket, or remove the fuse,
or switch off at the isolator as appropriate.
^ Remove the runners.
^ Use the lever to release the lamp cover from its frame.
^ Change the halogen lamp.
When purchasing a new lamp, take the old one with you
to make sure you obtain the correct replacement (Osram
66275, 230 V, 25 W, G9, heat resistant to 300 °C).
^ Push the lamp cover back into its retainers, and replace
the runners.
A noise can be
heard after a
This is not a fault.
The cooling fan continues to run for a while after the oven
has been switched off to prevent any humidity building up
in the oven, on the control panel or on the oven housing
unit. When the temperature has fallen sufficiently, the fan
switches off automatically.
cooking process.
The temperature will fall faster with the oven door open.
Cakes and biscuits – Check that the correct temperature has been set.
are not cooked
– Check whether there has been a change to the recipe.
properly after
The addition of more liquid or more eggs makes a
following the times
moister mix which would need longer to cook.
given in the chart.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
Browning is uneven. There will always be a slight unevenness. If browning is
very uneven, check
with Fan plus U:
– whether the temperature was set too high,
– whether the correct shelf level was used.
with Conventional heat V:
– the colour and material of the baking tins being used.
Light coloured, shiny, or thin walled tins are less suitable.
– whether the correct shelf level was used.
A fault code
You can rectify the following fault codes yourself:
appears in the
– F 23: The pyrolytic temperature of approx. 460 °C was
display. F + number
not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault message appears again please contact the
Miele Service Department.
– F 32: The door has not locked for the pyrolytic cleaning
process.
Switch the oven off and start the pyrolytic cleaning
process again.
If the fault code appears again call the Miele Service
Department.
– F 33: The door lock for the pyrolytic cleaning process will
not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the door lock will still not open please
contact the Miele Service Department.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
A fault code
– F 54: The food probe is faulty.
appears in the
display. F + number
The code will go out as soon as the food probe is
removed from the oven.
A replacement can be ordered from your Miele Dealer or
the Miele Spare Parts Department.
– F 55: Safety switch-off has been triggered. The oven has
switched off automatically as it has been operating for an
unusually long time. The length of time depends on the
oven function selected.
The oven will be ready for use again, after it has been
switched off and then back on again.
For all other fault codes please contact the Miele Ser-
vice Department.
If it is not possible to remedy a fault by following the instructions given above,
contact the Service Department. On no account open the appliance casing.
This appliance should only be repaired by a suitably qualified technician
trained by Miele.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, or if the
appliance is under guarantee, please
contact
When contacting Miele, please quote
the model and serial number of your
appliance.
These are shown on the data plate,
visible on the front frame of the oven
with the door fully open.
– your Miele Dealer
or
– the Miele Customer Contact Centre
(see back cover for address).
Please note that telephone calls may
be monitored and recorded to
improve our service.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
The following accessories may come as standard with some models. They are
Miele Dealer or the Miele Spare Parts Department.
FlexiClip telescopic runners
Gourmet oven dish
The gourmet oven dish can be placed
in the oven directly on the runners. It
has non-tip safety notches like the
universal tray to prevent it being pulled
out too far.
It has an anti-stick coating.
It is available in two sizes:
The FlexiClip telescopic runners can be
used on any shelf level. Each shelf level
can be drawn right out of the oven
individually to give a good overview of
cooking in progress.
– HUB 5000-M (internal dimensions
approx. 38 x 22 x 8 cm)
You can fit a FlexiClip runners to all the
shelf runners at the same time.
Baking tray, universal tray and rack
– HUB 5000-XL (internal dimensions
approx. 38 x 35 x 8 cm)
These items, supplied with your oven,
are also available to order.
When ordering, please quote the model
number of your oven.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Gourmet oven dish lid
Pizza stone
The pizza stone is ideal for items which
need a well baked base such as pizza,
quiche, bread, bread rolls and savoury
snacks.
When ordering a lid, please specify the
gourmet oven dish it is to be used with.
The baking stone is made from heat
retaining fire brick and is glazed.
Place it directly on the rack.
Flan/Pizza dish
A paddle made of untreated wood is
supplied with it for placing food on the
pizza stone and taking it off.
This circular pan is suitable for cooking
pizzas, flat cakes made with yeast or
whisked mixtures, sweet and savoury
tarts, baked desserts, and can also be
used for frozen cakes and pizzas.
Miele E-cloth
Removes grease and stains and leaves
no smearing. Suitable for cleaning
surfaces such as stainless steel, glass,
plastic and chrome without the use of
chemicals.
Oven cleaner
Suitable for removing stubborn soiling.
It is not necessary to pre-heat the oven
beforehand.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
switch (including switch, fuses and
relays acc. to EN 60 335).
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations (BS
7671 in the UK).
Important U.K.
The appliance is supplied for
connection to a 230-240 V, 50 Hz
supply with a 3-core cable.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
The wires in the mains lead are
coloured in accordance with the
following code:
unauthorised work.
Green/yellow = earth
Blue = neutral
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Brown = live
The voltage and connected load are
given on the data plate, visible below
the oven interior, with the door open.
Ensure that these match the household
mains supply. Please quote these data,
and the model and serial number when
contacting Miele.
WARNING
THIS APPLIANCE MUST BE
EARTHED
Connection of this appliance should be
made via a fused connection unit or a
suitable isolator, which complies with
national and local safety regulations,
and the on/off switch should be easily
accessible after the appliance has
been built in.
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H 05 VV-F or H 05 RR-F with a
suitable cross-sectional area (CSA)
may be used (available from the
Miele Customer Contact Centre).
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to install
a residual current device (RCD). Please
contact a qualified electrician for
advice.
When switched off there must be an all-
pole contact gap of 3 mm in the isolator
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Appliance dimensions and unit cut-out
Installation in a base unit
Installation in a tall unit
* Appliances with glass front
** Appliances with metal front
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Front dimensions
A H 5360: 53.2
H 5460: 47.5
B Appliances with glass front: 2.2
Appliances with metal front: 1.2
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the oven
,The appliance must not be
operated until it has been correctly
installed in its housing unit.
Otherwise it poses an electric shock
hazard.
Turn off the mains electricity supply
to the isolator.
^ Connect the mains cable from the
oven to the isolator.
To ensure adequate ventilation to
the oven once installed:
^ Push the appliance into the oven
housing unit and align it.
–
do not fit a rear panel into the
housing unit.
–
make sure that the shelf on
which the appliance is placed
does not touch the wall.
do not fit insulation material
inside the housing unit.
–
When installing the appliance do not
lift it up by the door handle as this
can damage the door.
^ Open the oven door and using two
screws secure it to the side walls of
the housing unit through the holes in
the oven trim.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 22 / 3008
(H 5360 BP; H 5460 BP)
M.-Nr. 07 247 440 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|