Operating and installation instructions
Refrigerator
with PerfectFresh zone
and Dynamic cooling
K 14827 SD
K 14827 SD ed/cs
en - GB
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 937 090
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Moving the shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Split shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adjusting the condiment tray/bottle shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Universal container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Moving the bottle divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Automatic defrost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Refrigerator section and PerfectFresh zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cleaning the interior and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Appliance door, side panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Ventilation gaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Metal grille at the back of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Active charcoal filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
To change the active charcoal filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Information for dealers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Side-by-side installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Levelling the appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Appliance dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Stainless steel appliances (height adjustable door). . . . . . . . . . . . . . . . . . . . . 56
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aOn/Off sensor
eTemperature display
bSuper cool sensor
f"Cooling" symbol
cSensor for setting a lower
temperature (X)
gSensor for setting a higher
temperature (Y)
dSafety lock indicator light
(only visible when the Safety lock is
activated)
hAlarm off sensor
(only visible when the door alarm
sounds)
iChange active charcoal filter
indicator
(only visible when the active
charcoal filters need to be changed)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aDynamic cooling fan
bInterior lighting
cButter and cheese compartment
dUniversal container
eEgg tray/Condiment tray
fBottle rack
gActive charcoal filter holder
hAdjustable shelves
iBottle shelf
jBottle divider
kCondensate channel and
drain hole
lPerfectFresh zone, dry compartment
mControl for setting the moisture level
in the humidity controlled
compartments
nPerfectFresh zone, humidity
controlled compartments
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Any other usage is not supported by
the manufacturer and could be
This appliance complies with all
relevant safety requirements.
dangerous. Miele cannot be held liable
Improper use can, however, present
a risk of both personal injury and
material damage.
for damage resulting from incorrect or
improper use or operation of the
appliance.
The appliance can only be used by
~
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on installation,
safety, operation and maintenance.
people with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, if they are
supervised whilst using it, or have been
shown how to use it in a safe way and
understand the hazards involved.
Safety with children
Keep these instructions in a safe
place and pass them on to any
future user.
Children 8 years and older may use
~
the appliance only if they have been
shown how to use it in a safe way and
understand the hazards involved.
Correct application
Children under 8 years of age must
This appliance is not designed for
~
~
be kept away from the appliance unless
they are constantly supervised.
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
This appliance is not a toy! Do not
~
allow children to play with it or near it,
or to play with the controls, or to swing
on the door.
– Shops
– Offices and showrooms
and by residents in establishments
such as:
– Hostels and guest houses.
The appliance is not intended for
outdoor use.
It must only be used as a domestic
appliance to cool and store foodstuffs.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
The more coolant there is in an
~
appliance, the larger the room it should
Before setting up the appliance,
~
be installed in. In the event of a
check it for any externally visible
damage. Do not install and use a
damaged appliance. It could be
dangerous.
leakage, if the appliance is in a small
room, there is the danger of
combustible gases building up.
For every 8 g of coolant at least 1 m3 of
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
If the connection cable is faulty it
~
must only be replaced by a service
technician authorised by the
manufacturer to protect the user from
danger.
Safe operation of the appliance is
~
only assured if it has been installed and
connected in accordance with these
This appliance contains the coolant
~
Isobutane (R600a), a natural gas which operating and installation instructions.
is environmentally friendly. Although it
Before connecting the appliance,
~
is flammable, it does not damage the
check that the connection data on the
ozone layer and does not increase the
data plate (voltage and frequency)
greenhouse effect. The use of this
match the mains electricity supply.
coolant has, however, led to a slight
This data must correspond in order to
increase in the noise level of the
avoid the risk of damage to the
appliance. In addition to the noise of
appliance. Consult a qualified
the compressor, you might be able to
electrician if in any doubt.
hear the coolant flowing around the
system. This is unavoidable, but does
not have any adverse effect on the
performance of the appliance. Care
must be taken during transportation
and setting up of the appliance that no
parts of the cooling system are
damaged. Leaking coolant can
damage the eyes.
Do not connect the appliance to the
~
mains electricity supply by a
multi-socket adapter or an extension
lead. These do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
In the event of any damage:
- avoid open flames and anything which
creates a spark,
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department for
advice.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The electrical safety of this
In areas which may be subject to
~
~
appliance can only be guaranteed if
correctly earthed. It is most important
that this basic safety requirement is
observed and regularly tested and
where there is any doubt, the
infestation by cockroaches or other
vermin, pay particular attention to
keeping the appliance and its
surroundings in a clean condition at all
times. Any damage which may be
caused by cockroaches or other vermin
will not be covered by the guarantee.
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).
Installation, maintenance and
~
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
While the appliance is under
~
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
The appliance must be isolated from
~
the electricity supply during installation,
maintenance and repair work.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
This appliance must not be used in
~
a non-stationary location (e.g. on a
ship).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
Do not use defrosting sprays or
~
de-icers, as they might contain
Do not store explosive materials in
~
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
Do not use a steam-cleaning
~
appliance to clean this appliance.
Steam could reach electrical
Do not operate any electrical
~
components and cause a short circuit.
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparking and explosion.
Do not use any oils or grease on the
~
door seal, as these will cause the seal
to deteriorate and become porous with
time.
If storing alcohol with a high
~
percentage proof in the refrigerator,
make sure the bottle is tightly closed
and stored upright.
If storing food which contains a lot of
~
fat or oil, make sure that it does not
come into contact with plastic
components as this could cause stress
cracks.
Danger of explosion.
Observe the "use by" dates given on
~
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
Do not block the ventilation gaps in
~
the appliance as this would impair the
efficiency of the appliance, increase the
temperature at which it is stored. Follow electricity consumption and could
the instructions given on food
manufacturer's packaging on storage
conditions required, as well as the "use
by" date.
cause damage to the appliance.
The appliance is designed for use
~
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Do not use sharp edged objects to
~
– remove frost and ice,
– separate food which has become
frozen.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
will lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
They will damage the evaporator,
causing irreversible damage to the
appliance.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Stainless steel appliances
Do not use sticky notes, transparent
The manufacturer cannot be held
~
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
adhesive tape, masking tape or other
types of adhesive on the surface of the
door. These damage the surface,
causing it to lose its dirt repellent
protective coating.
The high-quality surface of the door
~
is supsceptible to scratching.
Even fridge magnets can cause
scratching.
Disposal of your old appliance
Before disposing of an old
~
appliance, first make the door latch or
lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Be careful not to damage any part of
~
the pipework whilst awaiting disposal,
e.g. by
– puncturing the refrigerant channels
in the evaporator.
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to save energy
Normal energy
Increased energy
consumption
consumption
Installation site
In a ventilated room.
In an enclosed, unventilated room.
In direct sunlight.
Protected from direct sunlight.
Not near to a heat source (radiator, Near to a heat source (radiator,
oven).
oven).
Where the ideal ambient room
temperature is approx. 20°C.
Where there is a high ambient room
temperature.
Do not cover the ventilation gaps
and dust them regularly.
Temperature setting
with a thermostat
which is approximate
(set in stages).
With a medium setting of 2 to 3.
With a high setting: the lower the
temperature in the compartment, the
higher the energy consumption.
Temperature setting
with a thermostat which
is exact to the degree
(digital display).
Larder section 8 to 12 °C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer than
16 °C .
Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18 °C
Wine storage section 10 to 12 °C
Use
Drawers, shelves and racks
arranged as they were when the
appliance was delivered.
Only open the door when necessary Frequent opening of the door for
and for as short a time as possible. long periods will cause a loss of
coldness.
Store food in an organised way.
Searching for an item will mean the
door is open for longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Hot food will cause the compressor
to run for a long time, as the
appliance will have to work harder
to reduce the temperature.
Store food covered or packaged.
The evaporation or condensation of
liquids will cause a loss of coldness
in the refrigerator.
Place frozen food in the refrigerator
to defrost.
Do not over-fill the appliance to
allow air to circulate.
Defrosting
Defrost the freezer section when a A layer of ice hinders the cold from
layer of ice 0.5 cm thick has built reaching the frozen food, and
up. increases energy consumption.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Before using for the first time
Active charcoal filters
(Active AirClean filters)
Protective foil
^ Place the active charcoal filters
supplied in the holder, and place the
holder on one of the shelves inside
the refrigerator (see "Active charcoal
filters").
The stainless steel trim on the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
^ Do not remove the foil until the
appliance has been positioned in its
final location.
Switching on
Cleaning and care
^ Treat the stainless steel trim to the
interior shelves and the door shelves
with the Miele stainless steel
conditioner supplied as soon as you
have removed the foil.
^ Touch the On/Off sensor until the
temperature display comes on.
^ On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
removed the protective foil.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
The appliance doors have a special
finish which is resistant to soiling. Do
not use Miele stainless steel
conditioner on the appliance door.
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Switching off
Settings mode
Certain settings on the appliance can
only be selected in settings mode.
How to select settings mode and how
to change settings is described in the
relevant section of these instructions.
^ Touch the On/Off sensor until all of
the indicators go out (If this does not
happen, the safety lock is still
activated).
Overview of functions that can be
selected in settings mode:
The interior light will not come on when
you open the door and the cooling
process will be switched off.
To enter or leave settings mode
c
To switch the sensor tones
on/off
b
(see "Switching on and off")
To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")
^
To switch the safety lock on/off
(see "Switching on and off")
u
To change the brightness of the d
temperature display
(see "The correct temperature")
To adjust the temperature in the §
PerfectFresh zone
(see "The correct temperature")
The door alarm is automatically
disabled when the appliance is in
settings mode. As soon as the door
is closed, the door alarm is activated
again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Switching the sensor tones on/off
Activating or de-activating the safety
lock
The sensor tone which sounds each
time a sensor is touched can be
deactivated.
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
^ Touch and leave your finger on the X
sensor.
^ Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until b
appears in the display.
^ Touch the X sensor repeatedly until u
appears in the display.
^ Touch the On/Off sensor again.
^ By touching the X sensor, you can
now select whether the sensor tones
are switched on or off:
^ Touch the On/Off sensor again.
^ By touching the X sensor, you can
now select whether the safety lock is
switched on or off:
b 0: Sensor tones are switched off
b 1: Sensor tones are switched on
b –: Return to menu.
u 0: The safety lock is deactivated
u 1: The safety lock is activated
u –: Return to menu.
The old setting lights up, and your
newly selected setting flashes.
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm a
new setting.
^ Touch the On/Off sensor to confirm a
new setting.
^ Touch the X sensor repeatedly until c
appears in the display.
^ Touch the X sensor repeatedly until c
appears in the display.
^ Touch the On/Off sensor.
You have now left settings mode.
^ Touch the On/Off sensor.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
You have now left settings mode.
The safety lock indicator X will light up
in the temperature display when the
safety lock has been activated.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ disconnect it from the mains.
^ clean the appliance out and
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
Dynamic cooling
The dynamic cooling fan automatically
switches on when the cooling system
for the refrigerator switches on. It
distributes the temperature in the
appliance to all areas evenly so that all
the food will be chilled to about the
same degree.
The temperature in the appliance will
rise:
Setting the temperature
The temperature inside the appliance
can be selected by touching the arrow
sensors on either side of the
– the more often the door is opened
and the longer it is kept open,
temperature display.
– the more food that is stored in it,
By touching the
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
X sensor: the temperature will get
colder
Y sensor: the temperature will get
warmer.
The temperature being set will flash in
the display.
. . . in the refrigerator and the
PerfectFresh zone
When touching the sensors, the
following information shows in the
display:
We recommend a temperature of 4 °C
in the middle of the refrigerator.
The temperature in the PerfectFresh
zone is controlled automatically, and is
maintained at 0 to 3 °C.
– When first touched, the last
temperature selected flashes.
– Each subsequent touch of a sensor,
adjusts the temperature shown in
1 °C steps.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
– Leaving a finger on the sensor,
adjusts the temperature
continuously.
When the highest or lowest
temperature in the range is reached,
the X or Y sensor disappears.
^ Touch and leave your finger on the X
sensor.
Approx. 5 seconds after taking your
finger off the sensor, the average,
current temperature inside the
appliance is automatically shown.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until §
appears in the display.
^ Touch the On/Off sensor.
^ You can now adjust the temperature
in the PerfectFresh zone by touching
the X sensor. You can choose from
settings 1 to 9:
Temperature range
The temperature can be adjusted from
3 °C to 9 °C.
§ 1: Lowest temperature,
§ 9: Highest temperature.
§ –: Return to menu.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm a
new setting.
^ Touch the X sensor repeatedly until c
appears in the display.
Setting the temperature in the
PerfectFresh zone
^ Touch the On/Off sensor.
The temperature in the PerfectFresh
zone is automatically held at 0 to 3 °C.
It can be raised or lowered, e.g. if you
want to use it for storing items like fish.
You have now left settings mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
§ 5 is the default setting for the
PerfectFresh zone. If a setting of § 1
to § 4 is selected, the temperature
can fall below 0°C. Food could
freeze!
^ Touch the X sensor repeatedly until d
appears in the display.
^ Touch the On/Off sensor again.
Temperature display
^ The temperature display brightness
can now be changed by touching the
X sensor:
During normal operation, the
temperature display on the control
panel shows the average temperature
in the refrigerator.
d 0: Maximum brightness
d 1: Reduced brightness
d –: Return to menu.
The temperature display will flash if
The old setting lights up, and your
newly selected setting flashes.
– the temperature is not within the
possible temperature range (0 °C to
19 °C),
^ Touch the On/Off sensor to confirm a
new setting.
– a different temperature is being set.
^ Touch the X sensor repeatedly until c
appears in the display.
Changing the temperature display
brightness
^ Touch the On/Off sensor.
The temperature display brightness can
be adjusted to suit the lighting
conditions of the room.
You have now left settings mode.
^ Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm
Your appliance has been fitted with an
alarm to avoid energy being wasted if
the door is left open and to prevent
stored food becoming too warm.
To switch off the door alarm
whilst the door is still open
If you want to keep the door open
intentionally for more than approx.
2 minutes, you can switch the alarm off.
The alarm will sound if the door is left
open for more than approx. 2 minutes.
The Alarm off sensor will light up red
and the "Cooling" symbol will flash.
The alarm will stop and the indicators
will go out as soon as the door is
closed.
^ Touch the Alarm off sensor.
The alarm will stop.
The Alarm off sensor will light up
constantly and the "Cooling" symbol
will continue to flash until the door
has been closed.
To switch on the door alarm
The alarm system switches back on
automatically as soon as the door is
closed. It does not have to be switched
on manually.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool
The Super cool function
The Super cool function can be used to
rapidly reduce the temperature in the
refrigerator to its lowest setting
(depending on the room temperature).
Switching on Super cool
Super cool is particularly
recommended for the faster chilling of
large amounts of fresh food or drink.
^ Touch the Super cool sensor. It will
light up yellow.
The appliance will then work at full
power to lower the temperature.
Switching off Super cool
The Super cool function will switch itself
off automatically after approx. 6 hours.
The appliance will then continue to
work at normal power.
To save energy, the Super cool function
can be switched off once food and
drinks are sufficiently chilled.
^ Touch the Super cool sensor so that
the yellow indicator is dimmed.
The appliance will continue running at
normal power.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing food in the refrigerator
Different storage zones
– pre-packed vegetables and other
fresh food with a label stating it
should be kept at a temperature of
approx. 4 °C.
Due to the natural circulation of the air
in the appliance, there are different
temperature zones in the refrigerator.
Cold, heavy air sinks to the lowest
section of the appliance. Make use of
the different zones when placing food
in the appliance.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Danger of explosion.
This appliance has automatic
dynamic cooling, which helps to
keep an even temperature when the
fan is running, making the difference
between the various zones less
pronounced.
If storing alcohol with a high
percentage proof, make sure it is
tightly closed, and store upright.
If storing food which contains a lot of
fat or oil, make sure that it does not
come into contact with plastic
components as this could cause
stress cracks.
Warmest area
The warmest area is in the top section
of the door. Use this for storing butter
and cheese.
Food must not touch the back wall of
the refrigerator, as it may freeze to
the back wall.
Coldest area
The coldest area in the refrigerator is
directly above the PefectFresh zone.
However, the PerfectFresh zone is even
colder.
To allow air to circulate efficiently,
do not pack food too closely
together in the refrigerator. Do not
cover the fan in the rear wall of the
refrigerator, as this is essential for
keeping the appliance cool.
Use these areas in the refrigerator and
in the PerfectFresh zone for all delicate
and highly perishable food, e.g.
– fish, meat, poultry,
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream,
– fresh dough, cake mixtures, pizza or
quiche dough,
– soft cheese and other dairy
products,
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing food in the refrigerator
Food which is not suitable for
storing in the refrigerator
Storing food correctly
Food should generally be stored
covered or packaged in the refrigerator
(there are some exceptions to this rule
Not all food is suitable for storing in a
refrigerator at temperatures below 5 °C,
as some food is sensitive to cold.
Cucumbers, for example, become
glassy, aubergines bitter and potatoes
sweet. Tomatoes and oranges loose
their aroma, and the peel on citrus fruits
hardens.
in the PerfectFresh zone - see below).
This will prevent food smells from
affecting other food, food from drying
out, and also any cross-contamination
of bacteria. The growth of bacteria,
such as salmonella, can be avoided by
setting the correct temperature and
maintaining good standards of hygiene.
Food which is sensitive to cold includes:
– Pineapples, avocados, bananas,
pomegranates, mangos, melons,
papayas, passion fruit,
Unpacked meat and vegetables
Unpackaged meat and vegetables
should be stored separately. To avoid
any microbiological
citrus fruit (such as lemons, oranges,
mandarins, grapefruit),
cross-contamination, these foods may
only be stored together if they are
wrapped.
– Fruit which is not yet ripe
– Aubergines/egg plant, cucumbers,
potatoes, peppers/capiscum,
tomatoes,
courgettes/zucchini,
– Some hard cheeses, e.g. Parmesan
When shopping for food
The freshness of food when first placed
in the appliance is an important factor in
determining how long it stays fresh, and
how long it can be kept in the
refrigerator. Time out of the refrigerator,
e.g. during transportation, should be
kept to a minimum. For example, do not
allow food to stay in a hot car for too
long. Once food has started to
deteriorate, this process cannot be
reversed. As little as two hours outside
the refrigerator can cause food to start
deteriorating.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing food in the PerfectFresh zone
Food is stored at a lower temperature in longer period, as the water content of
the PerfectFresh zone than in the
refrigerator section. The humidity in the
PerfectFresh zone compartment can
also be regulated to suit the food being
stored, providing ideal storage
the food is largely retained.
Storing food in the
PerfectFresh zone
compartments
conditions and ensuring that food stays
fresh considerably longer while
The PerfectFresh zone is divided into
two areas, the dry compartment and
the humidity-controlled compartment
(the number of compartments will vary
depending on model).
retaining both flavour and vitamins.
Storage temperature
The optimum storage temperature for
fresh food which can tolerate cold
temperatures is 0 - 3 °C. This is the
temperature range which is
Dry compartment
The dry compartment has a relatively
low humidity level that is approx. the
same as that in the refrigerator. So the
main advantage of the dry
automatically maintained in the
PerfectFresh zone. Food can be stored
there at this temperature without loss of
freshness for considerably longer than
in a standard refrigerator, as the
deterioration process is decelerated at
this temperature.
compartment is the low temperature
(rather than the humidity).
– The dry compartment is ideal for
storing particularly sensitive foods,
such as fresh fish, shellfish, meat,
poultry, sausages, dairy products
and salad.
Remember that the fresher the food
when placed in the appliance, the
longer it will stay fresh.
Please note that foods rich in protein
deteriorate faster than others.
Shellfish, for example, deteriorates
faster than fish, and fish deteriorates
faster than meat.
Humidity level
The humidity level in the PerfectFresh
compartment will depend on
– the moisture content of the food
being stored and
– the quantity of food being stored.
Use the regulator to adjust the humidity
level in the PerfectFresh compartment.
The closer the storage humidity is to the
humidity content of the food, the crisper
and fresher the food remains over a
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing food in the PerfectFresh zone
Always keep these foods covered or
, = low humidity.
The regulator opens the vents to the
compartment and the humidity can
escape.
wrapped.
Exception: Meat. The surface of the
meat dries out slightly, helping to
prevent the growth of bacteria, which
results in the meat lasting longer. To
prevent the risk of bacterial
cross-contamination and meat
deteriorating, do not let one type of
meat come into direct contact with
another type.
If the regulator is set at low humidity ,
the humidity will be approx. the same
as the humidity in the refrigerator
section. At this setting, the low
temperature is the main advantage of
the compartment rather than the
humidity.
– At the low humidity setting ,, the
atmosphere inside the
Humidity-controlled compartment
The humidity-controlled compartment
has a regulator which is used to adjust
the relative humidity.
humidity-controlled compartment is
the same as in the dry compartment.
Take food out of the PerfectFresh
zone approx. 30 - 60 minutes before
using it. The aroma and taste do not
fully develop until the food has
reached room temperature.
Slide the regulator to the relative
humidity level required.
. = high humidity. The regulator
closes the vents to the compartment
and retains the humidity already
present. The humidity level greatly
depends on the type and quantity of
food being stored.
Can all types of food be stored
together?
Do not place all types of food together
in one compartment. Some types of
food do not store well together. Aromas
and flavours can transfer from one type
of food to another (e.g. carrots absorb
the smell and flavour of onions very
easily). Some food also gives off a
natural gas (ethylene) which speeds up
the rate at which other food perishes.
Please take into account that high
humidity is only achieved and effective
if the food is stored unwrapped or
loosely wrapped.
– The high humidity setting . is ideal
for storing freshly harvested produce
such as vegetables, salad, herbs,
cabbage and home-grown seasonal
fruit.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing food in the PerfectFresh zone
Examples of fruit and vegetables
which produce a large amount of this
natural gas are:
Apples, apricots, pears, nectarines,
peaches, plums, avocados, figs,
blueberries, melons and beans.
Examples of fruit and vegetables
which react strongly to the natural
gases given off by other types of fruit
and vegetables are:
Kiwis, broccoli, cauliflower, Brussels
sprouts, mangos, honeydew melons,
apples, apricots, cucumbers, tomatoes,
pears, nectarines and peaches.
Example: Broccoli should not be stored
with apples, as apples produce a large
amount of natural gas to which broccoli
is very sensitive. The result is a shorter
than expected storage time for the
broccoli.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing food in the PerfectFresh zone
The following tips may help if you find that food you have stored does not
keep well (e.g. food becomes limp or wilts after only being stored for a short
time):
^ Only use the appliance for storing fresh food. The condition of the food when it
is first placed in the appliance is an important factor in determining how long it
stays fresh.
^ Clean food before placing it in the PerfectFresh zone.
^ Allow very moist food to drain before placing it in the appliance.
^ Do not store food which is sensitive to cold in the PerfectFresh zone
(see "Food which is not suitable for storing in the refrigerator")
^ Bear in mind that not all types of food can be stored together (see "Can all types
of food be stored together?").
^ Select the correct PerfectFresh compartment (high or low humidity).
^ Store food unwrapped in the high humidity PerfectFresh compartment.
High humidity in the PerfectFresh compartment can only be achieved by storing
food which contains moisture in it.
If the humidity is not high enough, because, for example, too little food has been
stored in the compartment, you can use a wet sponge to increase the humidity.
^ If you think that the temperature in the PerfectFresh zone is too high or too low,
try regulating it via the refrigerator section by altering the temperature of the
refrigerator section slightly by 1 to 2 °C.
The temperature must be increased if ice crystals start to form on the floor of the
PerfectFresh zone as otherwise the cold temperature will damage the food.
^ If a lot of water has gathered on the base of the PerfectFresh zone, dry the base
with a towel. Drain food before storage or place a rack on the floor of the
PerfectFresh zone and place the food on the rack so that the moisture can drip
down.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Moving the shelves
To move the split shelf:
The shelves can be adjusted according ^ Take both halves of the split glass
to the height of the food.
shelf out,
^ Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
^ fit the two brackets onto the supports
on either side at the required height,
Stoppers prevent the shelves from
being dislodged by mistake.
^ and push the glass shelves in one
after the other. The shelf with the
raised edge must be at the back.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^ Push the rear half of the glass shelf
up slightly from below.
^ At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
PerfectFresh zone
compartments
Adjusting the condiment
tray/bottle shelf
The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.
^ Lift the tray/shelf up and out of the
stainless steel frame to remove.
^ Push up the stainless steel frame,
and remove.
^ Pull out the compartment as far as it
will go, and then lift it up and out.
^ Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
Push the runners back in again to
avoid injury or damage.
^ Carefully pull out the lid between the
compartments slightly, and lift it
down and out.
^ To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
To replace the compartment,
^ Some stainless steel frames are
easier to remove and replace if you
put your hand behind the back bar of
the frame and lift it upwards.
^ Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
^ place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the compartment b.
^ Then push the compartment back in
c.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Universal container
Moving the bottle divider
(depending on model)
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
The universal container can be used
both to store and serve food.
The bottle divider can be removed
completely (e.g. for cleaning).
^ To do this, push up the front edge of
the bottle divider, and disengage it.
It consists of a deep tray a and a
shallow tray b. Both trays fit the
stainless steel frame.
If you wish to use the universal
container to serve food,
^ place the shallow tray b in the
stainless steel frame, and use the
deep tray as a lid a.
You can lift the universal container,
including contents, out of the frame and
take it to the table.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic defrost
Refrigerator section and
PerfectFresh zone
The refrigerator section and the
PerfectFresh zone defrost
automatically.
Condensate and frost can build up on
the back wall of the refrigerator section
and the PerfectFresh zone whilst in use.
You do not need to remove this, as it
will defrost and evaporate automatically
with the warmth generated by the
appliance.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
condensate can flow away without
hindrance.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
A range of Miele branded cleaning and
conditioning products is available to
order from Miele or from
Unlike stainless steel cleaning
agents, the conditioning agent does
not contain any abrasive substances
and will gently remove soiling. Each
time it is used, it forms a water and
dirt repellent protective coating.
Make sure that no water can
penetrate into the electronic unit or
into the light.
To avoid damaging the surface of
your appliance, do not use:
Do not let water get into the
condensate channel and drain hole
when cleaning.
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach electrical
components and cause a short
circuit.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
– oven sprays,
– glass cleaning agents,
The stainless steel door has a
special finish which is resistant to
soiling.
– hard, abrasive sponges and
brushes, e.g. pot scourers,
Do not treat the door with stainless
steel conditioning agent as this will
cause noticeable smearing.
– melamine eraser blocks,
– sharp metal scrapers.
However, do use Miele stainless
steel conditioning agent to treat the
other stainless steel surfaces of the
appliance (available from Miele or
www.miele-shop.com).
Before cleaning
^ Switch the appliance off.
^ Disconnect the appliance from the
mains.
^ Take any food out of the appliance
and store it in a cool place.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ The bottle shelf and condiment tray in
the door can be removed from their
stainless steel frames for cleaning.
To remove the stainless steel trim from
the lid of the butter and cheese
compartment (in the top of the door),
proceed as follows:
^ Take the butter and cheese
compartment out of the refrigerator
section.
^ Pull the dividing plate out with both
hands.
^ Take out any removable parts, e.g.
shelves, for cleaning.
^ Open the lid of the compartment.
The stainless steel trim is a tight fit
across the plastic lid and will require
sufficient force to detach it.
Cleaning the interior and
accessories
^ Clean the appliance at least once a
month.
Remove soiling immediately to
prevent it from drying on.
Use lukewarm water with a little
washing-up liquid.
The following are dishwasher safe:
^ Detach the stainless steel trim from
the edge of the lid (1.) at one side
and remove.
– the butter dish, egg trays
(supplied as standard, depending on
model)
^ Press the white plastic stoppers out
of notches (2.).
– the bottle shelf and condiment tray in
the door (removed from their stainless
steel frames)
^ Remove the compartments and the
lid from the PerfectFresh zone (see
"Adjusting the interior fittings -
– the butter and cheese compartment
(with the stainless steel trim removed)
PerfectFresh zone compartments")
The stainless steel frames and the
stainless steel trim on the butter and
cheese compartment in the door are
not suitable for cleaning in a
dishwasher.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Appliance door, side panels
The temperature of the dishwasher
programme must not exceed 55 °C.
Contact with some foodstuffs, such
as carrots, tomatoes or ketchup can
cause plastic items to discolour.
However, this discolouration will not
affect the stability of plastic items.
Remove any soiling from the
appliance door and side panels
immediately.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
^ Clean the interior shelves, drawers,
lid and dividing plate by hand. These
are not suitable for cleaning in a
dishwasher.
All surfaces are susceptible to
scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
surfaces.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain hole if necessary.
^ The surfaces should be cleaned
using a solution of hot water and a
little washing-up liquid applied with a
soft sponge. They can also be
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth.
cleaned with a damp microfibre cloth
(without using any cleaning agent).
Leave the door open to air the
appliance for a short while.
^ After cleaning, wipe with clean water
and dry with a soft cloth.
^ Miele stainless steel conditioning
agent can be used to remove any
soiling from the stainless steel frames
and trim.
^ It is important to treat the stainless
steel frames and trim with Miele
stainless steel conditioning agent
each time they are cleaned. This will
protect the surface and help prevent
resoiling.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Stainless steel appliances
– Appliance door
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The appliance door has a high quality,
special finish which is resistant to
soiling and is very easy to clean.
Do not use the following to
clean/condition the door
^ The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
– stainless steel cleaning agent:
this will damage the surface.
– Miele stainless steel conditioning
agent:
Metal grille at the back of the
appliance
this will cause noticeable smearing.
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
– Side panels
^ Use Miele stainless steel conditioning
agent to remove any soiling.
consumption of the appliance.
^ Make sure you treat the side panels
with Miele stainless steel conditioning
agent each time you clean them.
Unlike stainless steel cleaning
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
agents, the conditioning agent does
not contain any abrasive substances.
It will give them a water and dirt
repellent protective coating and help
prevent re-soiling.
After cleaning
^ Push the dividing plate in until it
clicks into place.
^ Replace all shelves and accessories
in the appliance.
Ventilation gaps
^ The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
^ Reconnect to the mains and switch
the appliance back on.
^ Switch on the Super cool function for
a while so that the appliance can
cool down quickly.
^ Place food back in the appliance and
close the door.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Active charcoal filters
The active charcoal filters should be
changed approx. every 6 months.
To confirm the filters have been
changed
When the Change active charcoal filter
indicator lights up red, the active
charcoal filters need to be changed.
^ Touch the Change active charcoal
filter indicator for approx. 2 seconds.
The indicator light will go out, and the
counter will be reset.
To change the active charcoal
filters
To delay changing the active
charcoal filters
If you do not have new active charcoal
filters, you can order them from your
Miele dealer or from Miele.
You can switch off the Change active
charcoal filter indicator early, if you
would prefer not to have the red
indicator showing.
^ Pull the active charcoal filter holder
upwards to remove it from the shelf.
^ Touch the Change active charcoal
filter indicator for approx. 2 seconds.
The Change active charcoal filter
indicator will go out.
^ Take out the two filters and fit the new
filters into the holder with the
protruding edge facing downwards.
^ Place the holder in the middle of the
raised edge at the back of the shelf,
so that it clicks into position.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Active charcoal filters
If you have delayed changing the
active charcoal filters and the indicator
is not lit up, you will need to reset the
counter when you replace the active
charcoal filters via the settings mode.
Useful tip:
When you are storing foods with a
strong smell (such as ripe cheeses),
– place the holder containing the
active charcoal filters on the shelf
where the food is going to be stored,
– change the active charcoal filters
early if required (remembering to
reset the counter),
^ Touch and leave your finger on the X
sensor.
– and place more active charcoal
filters (in holders) in the appliance.
Active charcoal filters and holders
can be obtained from your Miele
dealer or from Miele.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until
^ appears in the display.
^ Touch the On/Off sensor.
^ Touch the X sensor repeatedly until
^ 2 appears in the display.
^ Touch the On/Off sensor for approx.
2 seconds to confirm.
The counter is now reset.
^ Touch the X sensor repeatedly until
c appears in the display.
^ Touch the On/Off sensor.
You have now left the settings mode.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the temperature in the refrigerator
section is too low.
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
^ Select a warmer temperature.
^ The Super cool function is still
switched on. Super cool only
switches itself off after 6 hours.
. . the alarm sounds.
Has the appliance door been open for
longer than 2 minutes?
unauthorised work.
^ Close the door.
What to do if . . .
. . . the compressor is switching in
too frequently and for too long.
. . . the appliance does not get cold.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
^ Check whether the ventilation gaps
have been covered over or become
dusty.
^ Check that the plug is correctly
inserted into the socket and switched
on.
^ Check whether the metal grille (heat
exchanger) at the back of the
appliance has become too dusty.
^ Check that the fuse is not defective
and the mains fuse has not tripped. If
it has, contact a qualified electrician
or the Miele Service department.
^ The door has been opened too
frequently, or a large amount of food
has been put in at once.
^ Check that the door has been closed
properly.
. . . the appliance does not get cool
although the display is lit up.
. . . the compressor runs
continuously.
Demo mode has been activated. This
allows the appliance to be displayed in
the showroom without the cooling
system being switched on. Do not
activate this setting for domestic use!
To save energy, the compressor runs at
a lower speed, but for longer, when
less cooling is required.
^ Deactivate the demo mode (see
"Information for dealers - demo
mode").
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the interior lighting is not
working.
. . . you cannot switch the appliance
off.
^ Was the door left open for too long?
The lighting switches itself off
automatically after approx. 15
minutes if the door is left open.
The safety lock has been activated.
. . . the floor of the refrigerator is wet.
The condensate drain hole is blocked.
If this is not the case, then the interior
lighting is defective.
^ Clean the condensate channel and
drain hole.
^ Call Miele Service.
The LED lighting may only be repaired
or replaced by a service technician.
There are live electrical components
under the cover. Danger of injury and
damage.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
Do not remove the cover. If the
cover is damaged or needs to be
removed due to damage, exercise
caution. There are lasers in the
lighting (laser beam class 1M) which
you should avoid looking at directly.
Do not use optical instruments
(magnifying glass or similar) to look
at the lighting either.
To prevent unnecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
. . . the Change active charcoal filter
indicator is red.
^ Replace the active charcoal filters.
You can order replacement filters via
your Miele dealer or Miele.
. . . "_F" appears in the temperature
display.
There is a fault. Call Miele Service.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Noises
Normal noises
What causes them
Brrrrr...
Humming noise made by the motor (compressor). This noise can
get louder for brief periods when the motor is switching on.
Blubb, blubb....
Click....
A gurgling noise can be heard when coolant is circulating
through the pipes.
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr....
Creak ...
On multi-zone and frost-free appliances you can sometimes just
hear the movement of air circulating inside the appliance.
Creaking sounds can be heard when material inside the
appliance expands.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that you can
easily rectify
What causes them, and what can you do about
them
Rattling, vibrating
The appliance is uneven: Realign the appliance using a spirit
level, by raising or lowering the screw feet underneath the
appliance.
The appliance is touching another appliance or piece of
furniture: Move it away.
Drawers, baskets or shelves are unstable or sticking: Check
all removable items and refit them correctly.
Are any bottles or containers unstable or knocking against
each other? Separate them.
The transport cable clips are hanging loose at the back of
the appliance: Remove the clips.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– Miele
(see back cover for contact details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance. This
information is given on the data plate
inside your appliance.
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as described
in these instructions.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
purchase. However, you must activate
your cover by calling 0845 365 6640 or
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Information for dealers
Demo mode
The appliance can be demonstrated in
the showroom or at exhibitions in "demo
mode". In this mode the controls and
interior lighting are functioning but the
compressor remains switched off.
To activate/deactivate demo mode
^ Switch on the appliance.
^ Touch and leave your finger on the X
sensor. At the same time touch the
On/Off sensor once (without letting
go of the V sensor).
^ Touch the X sensor 4 times, on the
5th time touch the X sensor and
leave your finger on it until P appears
in the display.
^ Touch the X sensor repeatedly until n
appears in the display.
^ Touch the On/Off sensor.
^ By touching the X sensor, you can
now select whether the demo mode
is activated or deactivated:
n 0: Demo mode is deactivated
n 1: Demo mode is activated
n –: Return to menu
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm
the new setting.
^ Touch the X sensor repeatedly until P
appears in the display.
^ Touch the On/Off sensor.
You have now left settings mode.
The demo mode has been activated or
deactivated.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs (BS 1363)
All electrical work should be carried out The fuse cover must be re-fitted when
by a suitably qualified and competent changing the fuse, and if the fuse cover
person in strict accordance with current is lost, the plug must not be used until a
local and national safety regulations
(BS 7671 in the UK).
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220-240 V 50 Hz supply.
Please ensure that the connection data
quoted on the data plate match the
household mains supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
Connection should be made via a
suitable switched socket which is easily your local electrical supplier.
accessible. For extra safety it is
advisable to protect the appliance with
a suitable residual current device
WARNING
(RCD).
THIS APPLIANCE MUST BE
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
EARTHED
This appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in power could trigger the safety
cut-out mechanism. This could damage
the electronic unit.
The appliance must not be used with
so-called energy saving devices. These
reduce the energy supply to the
appliance which could then become
too warm. Using such devices could
alter the specification of the product.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Climate range
Do not place any appliance which
gives off heat, such as a toaster or
microwave oven, on top of this
appliance, as this would increase
the appliance's energy
The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
consumption.
Climate range
Ambient room
temperature
Side-by-side installation
To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not generally be
installed side by side next to other such
appliances.
SN
N
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
ST
T
Operating in a room which is too cold
will result in the cooling system
switching off for too long, causing the
internal temperature in the appliance to
rise with the risk of food deteriorating
and going off.
However, some appliances have
side-wall heating making them suitable
for side-by-side installation with this
refrigerator.
Your dealer will be able to advise
you on which models are suitable.
Ventilation
^ Follow the instructions for the other
appliance on how to install the two
appliances side by side.
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation gaps must not be
covered or blocked in any way. They
should be dusted on a regular basis.
Location
This appliance should be installed in a
dry, well-ventilated room. It should not
be installed where it is exposed to
direct sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator. The room
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
more energy the appliance requires to
operate.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
Levelling the appliance door
^ Remove the cable clip from the back
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position with the back against the
wall.
Aligning the appliance
^ Ensure that you unscrew adjusting
foot c from the hinge plate until it sits
on the floor. Then unscrew the foot by
a further 90°.
^ To align the appliance, adjust the
front feet using the spanner supplied.
Stainless steel appliances
^ If necessary, also align the two rear
adjusting devices a using a socket
wrench b.
Turn the adjusting device clockwise
to raise the appliance up at the back.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Appliance dimensions
A
B
C
K 14827 SD
K 14827 SD ed/cs
1850 mm
600 mm
630 mm
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
To change the door hinging you will
need the following tools:
– a cross-slotted screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed for
changing the door hinging.
Removing the door handle
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate.
^ Undo the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Removing the soft-close door
mechanism
^ Fit restraining clip b (supplied with
the appliance) onto soft-close
mechanism c.
The soft-close door mechanism is at the
bottom of the door.
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Open the appliance door.
^ Carefully remove cover d from the
side using a flat-bladed screwdriver.
^ With the help of another person, tip
the appliance back slightly.
^ Remove panel a from the soft-close
mechanism by inserting a flat-bladed
screwdriver into the gap from above
and easing it off bit by bit.
Take care not to damage the door
seal.
^ Push hinge pin e up and out from
underneath.
If the door seal is damaged, the
door will not close properly and
cooling will be impaired.
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel a.
^ Slide panel a towards the appliance,
and leave it hanging between the
door and the appliance.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Changing over the door
Make sure the door shelves are
empty.
^ Close the appliance door.
^ Slide soft-close mechanism bracket
f as far as it will go towards the
handle side of the door, and undo
screws g on the soft-close
mechanism.
^ Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
^ Remove cover a by sliding it
forwards from the back and then
lifting it off.
^ Place the soft-close mechanism to
one side.
^ Remove cover b by pulling it
upwards.
Caution. The appliance door is not
secure when the hinge plate has
been removed.
^ Loosen screws d in upper hinge
plate c and pull it upwards and off.
^ Carefully lift the door off and place it
to one side.
^ Gently loosen cover e by carefully
inserting a flat-bladed screwdriver
into the gap from below.
^ Remove cover e together with
retaining plate f.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Then separate retaining plate f from
cover e, by pushing it slightly to the
left. Then pull the cover forwards and
off.
^ Rotate retaining plate f by 180°.
^ Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
^ Remove cover g, rotate it by 180°
and fit it to the opposite side.
^ Then fit cover e together with
retainer f on the opposite side.
^ Remove cap h from the bearing
bush in the door and refit on the
opposite side.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Changing over the hinge brackets
^ Screw hinge plate f into position on
the opposite side using the two outer
long slots only. To make it possible to
align the door later, do not replace
the centre screw at this stage.
Important! The height of the door
on stainless steel appliances can
be adjusted.
Please read the relevant
instructions.
^ Important. Screw the adjustable foot
c into hinge pin a as far as it will go.
The instructions are the same for
all appliances from "To refit the
door".
^ Refit hinge pin a together with disc
b and adjustable foot c. Important.
The notch at the bottom of the hinge
pin should face towards the back.
A. White appliances
(door not height adjustable)
B. Stainless steel appliances
(height adjustable door)
^ Pull hinge pin a together with disc b
and adjustable foot c upwards and
off.
^ Unscrew threaded pin d by one turn
using the allen key supplied.
^ Remove cover cap d.
^ Undo screws e and take hinge plate ^ Pull hinge pin a together with disc b
f off.
and adjustable foot c upwards and
off.
^ Unscrew part h from hinge plate f,
rotate it by 180° and refit into the hole ^ Remove cover cap e.
on the opposite side of the hinge
^ Undo screws f and take hinge plate
g off.
plate.
^ Refit cover cap d in the other hole.
^ Remove cover g and fit it into the
holes on the opposite side.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Unscrew part i from hinge plate g,
rotate it by 180° and refit into the hole
on the opposite side of the hinge
plate.
^ Screw hinge plate g into position on
the opposite side using the two outer
long slots only. To make it possible to
align the door later, do not replace
the centre screw at this stage.
^ Refit cover cap e in the other hole.
^ Important. Screw the adjustable foot
c into hinge pin a as far as it will go.
^ Unscrew threaded pin d fully using
the allen key supplied.
^ Fit threaded pin d into the hinge
plate on the opposite side, until it is
flush with the hinge plate.
^ The end must protrude sufficiently
through the hinge pin hole such that
the guide on the hinge pin will fit over
it later on (see following illustration).
^ Remove cover h and fit it into the
holes on the opposite side.
^ Refit the hinge pin a together with
disc b and adjustable foot c such
that the guide on the end of the pin
fits over the threaded pin. Then
tighten it.
^ Then tighten threaded pin d.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
To refit the door
Replacing the soft-close door
mechanism:
^ Place the door onto the hinge pin
from above.
^ Close the appliance door.
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^ Fit hinge plate c onto the opposite
side and secure it with screws d.
^ Fit covers a and b to their opposite
sides.
^ Align the door with the appliance
housing using the outer long slots in
the lower hinge plate. Then tighten
the screws.
^ Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^ Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
The screw holes on the left and right
must line up perfectly.
^ First fix the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
^ Replace panel b onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^ Close the appliance door.
^ Attach panel b to soft-close
mechanism bracket d.
^ Align bracket d to the hinge plate,
and insert pin e from above so that
the right angle fits into the recess.
^ Click cover f back into place.
Make sure that cover f fits properly so
that the door can be closed without
hindrance and the pin is protected.
^ Remove restraining clip g.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Refitting the handle
It is important to check that the side
section of the handle d does not
come into contact with the door seal
when opening the door, as this
would damage the door seal
permanently.
Please make sure you follow the
instructions below carefully when
you refit the handle. The door seal
will be damaged if the handle is
fitted incorrectly.
If, after you have refitted the handle,
you find that the side section does
touch the door seal when the door is
opened:
^ Realign mounting plate c with grub
screws a until the mounting plate
and the side section of the handle d
are at the correct angle and the side
section does not touch the door seal
when the door is opened.
^ Loosely attach the handle to the
opposite side of the door with the two
front screws b.
Mounting plate c must be positioned
on the side of the door so that when the
door is closed it is flush with the side of
the appliance.
If this is not the case,
^ tighten both grub screws a with an
allen key until mounting plate c lines
up correctly.
^ Then tighten all 4 screws b.
^ Slide the side section of the handle
d into the guides on the mounting
plate until it clicks into place.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Aligning the appliance
The appliance door can be aligned
Stainless steel appliances
retrospectively to the housing using the (height adjustable door)
outer long slots in the lower hinge plate.
The appliance door can be aligned
retrospectively at the side of the lower
hinge plate:
In the following illustration the door
is not shown in the closed position to
make it easier to see what you have
to do.
^ Unscrew threaded pin a by a
maximum of one turn using the allen
key supplied.
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws b again. Screw
a does not need to be used again.
^ Adjust the height of the hinge pin
using the spanner supplied.
To raise the door:
turn clockwise
To lower the door:
turn anti-clockwise.
^ Tighten the threaded pin.
The hinge pin is now fixed in position
again.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
depth 580 mm) the appliance can be
installed directly next to a kitchen
furniture housing unit. The appliance
door will protrude in front of furniture
fronts at the sides by 34 mm and by
55 mm in the middle of the door. This
enables the doors to be opened and
shut without being obstructed.
When installed next to a wall d a
distance of approx. 55 mm must be
maintained on the hinge side between
the wall d and the appliance b, so
that the doors and the handles have
sufficient space for opening.
aTop box
bAppliance
cHousing unit
dWall
The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box a.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance across the entire width of the
top box for air to circulate.
The cross section of the air outlet under
the room ceiling must be at least
300 cm2 to ensure that air can circulate
without hindrance. Otherwise the
appliance has to work harder, resulting
in an increase in electricity
consumption.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 4711
K 14827 SD, K 14827 SD ed/cs
M.-Nr. 07 937 090 / 02
Download from Www.Somanuals.com. All Manuals Search And Download.
|