Miele Dishwasher G4281 User Manual

Operating Instructions  
Dishwasher  
G 4281  
G 4286  
en - US, CA  
To prevent accidents  
and appliance damage  
read these instructions  
before  
installation or use.  
M.-Nr. 09 510 201  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Turbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Optimize Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Faults in the water intake or water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Noise measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
General requirements for measuring noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Installation requirements for measuring noise. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING –  
Electrical Safety  
Before installation, make sure that  
~
the voltage and frequency listed on the  
data plate correspond with the  
When using your dishwasher, follow  
basic precautions, including the  
following:  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Read the operating instructions and  
installation diagram carefully before  
installation or use of the dishwasher  
to prevent injury and machine  
damage.  
Before installation or service,  
~
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
Use the dishwasher only for its  
intended purpose. This appliance is  
intended for residential use only.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Be certain your appliance is  
~
Correct usage  
properly installed and grounded by a  
qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician.  
The dishwasher is not designed for  
~
commercial use. It is intended for use in  
domestic households and in similar  
working and residential environments  
such as, shops, offices and showrooms  
or guest houses.  
The dishwasher is not intended for  
~
outdoor use.  
It must only be used as a domestic  
~
appliance as specified in these  
If the supplied power cord is  
~
damaged it must only be replaced by a  
Miele Service technician with a genuine  
Miele power cord.  
operating instructions, for cleaning  
domestic cookware and cutlery. Any  
other usage is not supported by the  
manufacturer and could be dangerous.  
The outlet must be accessible at all  
~
times after installation to disconnect the  
Persons who lack physical, sensory  
~
dishwasher.  
or mental abilities, or experience with  
the appliance should not use the  
dishwasher without supervision or  
instruction by a responsible person.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
This dishwasher should only be  
~
installed under a continuous counter  
The dishwasher must be installed  
~
and connected in accordance with the  
installation instructions.  
top secured to adjacent cabinetry.  
Do not install this dishwasher  
~
beneath a cooking surface, oven or any  
Installation and repair work should  
~
appliance that radiates heat.  
be performed by a Miele authorized  
service technician. Work by unqualified  
persons could be dangerous and may  
void the warranty.  
High temperatures from these units  
may damage the dishwasher.  
A toe-kick must be used with the  
~
dishwasher. If the supplied toe-kick is  
not used, a cabinet matching toe-kick  
must be installed.  
Do not install or use a damaged  
~
dishwasher. A damaged appliance is  
dangerous. Unplug the machine and  
contact Miele Technical Service  
Department.  
Do not install the dishwasher in an  
~
area where it will be exposed to  
temperatures below freezing.  
Ensure that any plastic wrappings,  
~
bags, etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
Do not cut the intake hose or  
~
submerge it in liquid. This hose  
contains electrical components that  
could cause injury or property damage  
if cut or submerged.  
This appliance must not be used in  
~
a non-stationary location (e.g. on a  
boat).  
Only power up the dishwasher when  
~
all installation and plumbing work is  
complete.  
, WARNING - Fire hazard!  
~
Do not cover or crush the plug of the  
appliance. Ensure that the cabinet  
opening for the dishwasher provides  
ample space for the plug and cord.  
Installing the dishwasher in a tight  
Do not place hose or power cord  
~
next to a heat source e.g. hot water  
pipes.  
Do not expose hose or power cord to  
space may crimp the power cord or put corrosive substances.  
pressure on the plug which could Damage of hose or power cord could  
cause overheating. cause electrical shock or water  
damage!  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Use  
Do not inhale or swallow detergents.  
~
Dishwasher detergents contain irritant  
To reduce the risk of injury, do not  
~
allow children to play in, on or near the  
and corrosive ingredients. They can  
cause burning in the mouth and throat if  
swallowed, or inhibit breathing. Consult  
a doctor immediately if detergent has  
dishwasher. It is possible for small  
fingers may be pinched in the door.  
Only use the dishwasher if all panels been swallowed or inhaled.  
~
are properly in place.  
Do not drink water from the  
~
dishwasher! Harmful residues could be  
Do not tamper with the controls.  
~
present.  
Do not sit or stand on the door or  
~
baskets of the dishwasher. Close the  
Do not fill the rinse aid reservoir or  
~
door when not in use.  
salt container with detergent. It will  
destroy the rinse aid compartment and  
water softener.  
Under certain conditions, hydrogen  
~
gas may be produced in a hot water  
system that has not been used for two  
weeks or more. HYDROGEN GAS IS  
Dishes can be very hot at the end of  
~
a program. Allow the dishes to cool  
EXPLOSIVE. If the hot water system has until they are cool enough to handle  
not been used for such a period, turn  
on all hot water faucets and let water  
flow from each for several minutes  
before using the dishwasher. This will  
release any accumulated hydrogen  
gas. Do not smoke or use an open  
flame during this time.  
before unloading them.  
The water supply must be turned off  
~
when the appliance is not used for a  
longer period of time (e.g. during  
vacations).  
Disposal of an appliance  
Be sure that all items placed in the  
~
dishwasher are "dishwasher safe". For  
items not labeled, check the  
If the appliance is removed from its  
~
installation site and will not be used,  
remove the doorlock to the wash  
cabinet to prevent children from locking  
themselves in the machine.  
manufacturer’s recommendations.  
When loading tableware, place  
~
sharp items away from the door to  
prevent damage to the seal. Load  
sharp items pointing downwards to  
prevent injuries.  
SAVE THESE  
INSTRUCTIONS  
Only use detergents and rinse aids  
~
recommended for residential  
dishwashers. Keep all detergents and  
rinse aids out of the reach of children.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dishwasher  
a Upper spray arm (not visible)  
b Cutlery tray  
g Triple filter system  
h Data plate  
c Upper basket  
i Rinse aid reservoir  
d Middle spray arm  
j Dual compartment detergent  
dispenser  
e Air inlet for drying  
(depending on model)  
f Lower spray arm  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dishwasher  
Control panel  
aCheck / Refill indicators  
eProgram selection  
bTime display  
fProgram button  
c, button with indicator light  
(Delay start)  
gK button (On/Off) with indicator light  
dTurbo button with indicator light  
This operating instruction manual describes several dishwasher models with  
different indicated settings.  
The different dishwasher models are named :  
Standard = Dishwasher with 31 11/16" (80.5 cm) height (built-in)  
or 33 1/4" (84.5 cm) height (stand-alone)  
XXL  
= Dishwasher with 33 1/4" (84.5 cm) height.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Energy saving washing  
Disposal of the packing  
material  
This dishwasher is economical in the  
use of water and electricity. For best  
results follow these tips:  
The cardboard box and packaging  
protect the appliance during shipping.  
These materials are biodegradable and  
recyclable. Please recycle.  
^ For lowest energy consumption you  
may connect the dishwasher to a  
cold water source.  
Ensure that any plastic wrappings,  
bags etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
^ Make full use of the baskets' capacity  
without overloading the dishwasher.  
This ensures the most economical  
washing.  
Disposal of an old machine  
^ Choose a program that best suits the  
degree of soiling and the type of  
dishes being washed.  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling authority about the  
possibility of recycling these materials.  
^ Use the Economy program for energy  
saving dishwashing.  
Ensure that the appliance presents no  
danger to children while being stored  
for disposal. Before discarding an old  
appliance, unplug it from the outlet, cut  
off its power cord and remove any  
doors to prevent hazards.  
From the aspect of combined energy  
and water consumption, this program  
is the most efficient for washing  
normally soiled dishes.  
^ Observe the detergent  
manufacturer's recommendations for  
detergent dosage.  
^ When using powder or liquid  
detergent, reduce the amount to 2/3  
of the normal amount when washing  
a small load.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
To open the door  
To close the door  
^ Push the baskets in.  
^ Lift the door and push until it clicks  
into position.  
^ Pull the handle to open the door.  
If the door is opened during operation,  
the dishwasher will stop running. Once  
the door is closed the program will  
continue.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Rinse aid  
Rinse aid is needed to prevent spotting  
on dishes and glassware.  
The rinse aid is filled in the reservoir  
and the set amount will be  
automatically dosed.  
,Filling the rinse aid reservoir with  
detergent will damage the reservoir.  
Only pour rinse aid formulated for  
residential dishwashers into the  
reservoir.  
^ Pour liquid rinse aid into the reservoir  
until it its visible on the surface of the  
screen.  
When using "Tab" detergents rinse  
aid is not needed.  
Adding rinse aid  
The rinse aid reservoir holds approx.  
3.7 oz (110 ml).  
^ Press on the flap until you hear it  
click shut. Failure to close it all the  
way allows water to enter the  
reservoir during the wash program.  
^ Clean any spilled rinse aid. The flap  
will remain closed during normal  
operation.  
Rinse aid indicator  
When the Rinse aid indicator comes on,  
the reservoir only contains enough rinse  
aid for 2 - 3 wash programs.  
^ Press the button on top of the rinse  
aid reservoir in the direction of the  
arrow. The flap will pop open.  
^ Add rinse aid soon.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Deactivating refill indicators  
The flashing in the time display  
indicates whether the refill indicators  
are activated or not.  
If you consistently use Tab detergents,  
you can deactivate the refill indicator if  
you wish.  
– "p 1": refill indicators are activated  
^ Press the K button to turn the  
dishwasher off.  
– "p 0": refill indicators are deactivated  
^ Press the Program button if you wish  
^ Hold down the Program button and  
simultaneously turn the dishwasher  
on using the K button.  
to change the setting.  
The setting is immediately saved.  
Keep the Program button pressed for ^ Press the K button to turn the  
at least four seconds until the lower  
dishwasher off.  
right program indicator lights up.  
If you switch to a single-function  
detergent, it is important to  
remember to add rinse aid and to  
activate the indicator.  
If it does not come on, start over.  
^ Press the Turbo button nine times.  
The Turbo indicator light flashes 9 times  
at short intervals.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Setting the rinse aid dosage  
^ Press the K button to turn the  
dishwasher off.  
You can adjust the rinse aid dosage to  
optimize the results.  
^ Hold down the Program button and  
simultaneously turn the dishwasher  
on using the K button.  
Keep the Program button pressed for  
at least four seconds until the lower  
right program indicator lights up.  
The rinse aid dosage can be set at  
levels between 0 and 6 ml. The factory  
setting is 3 ml of rinse aid. This is just a  
recommendation.  
If the dishes are spotty:  
^ Use a higher setting.  
If it does not come on, start over.  
^ Press the Turbo button three times.  
If the dishes are cloudy or streaky:  
^ Use a lower setting.  
The Turbo indicator light flashes 3 times  
at short intervals.  
The time display shows the flashing  
sequence p 3.  
The set value is shown in the time  
display after the P.  
^ Select the desired dosage with the  
Program button.  
Every touch of the button increases  
the level.  
The setting is saved immediately.  
^ Press the K button to turn the  
dishwasher off.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
^ The spray arms must not be blocked  
by items that are too tall or hang  
through the baskets. Check  
clearance by manually rotating the  
spray arms.  
,Do not wash items soiled with  
ash, sand, wax, grease or paint in  
the dishwasher.  
Ash and sand do not dissolve and  
will be distributed throughout the  
inside of the dishwasher.  
^ Place very small items in the cutlery  
tray or basket so they do not fall to  
the bottom of the wash cabinet.  
Wax, grease and paint will cause  
permanent discoloration and  
damage to the dishwasher.  
^ Food residue and spilled liquids  
should be cleaned from the sides of  
the dishwasher door. These are  
outside of the wash cabinet and are  
not cleaned by water from the spray  
arms.  
^ Scrape food from dishes before  
placing them in the dishwasher,  
rinsing is not necessary.  
^ Some foods contain natural dyes,  
e.g. carrots or tomatoes. Plastic items  
may discolor permanently if they  
come in contact with food dyes.  
^ All items can be placed anywhere in  
the baskets.  
^ Load dishes so that water can reach  
all surfaces. Do not place dishes or  
cutlery inside other pieces.  
^ Make sure that all items are securely  
positioned.  
^ Hollow items such as cups and  
glasses should be placed upside  
down in the baskets.  
^ To ensure good water coverage, tall,  
narrow and hollow items, i.e. vases  
or champagne glasses, should be  
placed in the center of the basket  
rather than in the corners.  
^ Concave based items such as mugs  
or bowls, should be placed at an  
angle so that water does not pool.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Items not recommended for  
dishwashing  
Glassware:  
– There are no standard guidelines for  
washing glassware, when in doubt  
wash by hand.  
– Cutlery with wooden handles  
– Wooden cutting boards  
– When purchasing new dishes,  
glasses and cutlery, make sure they  
are dishwasher safe. Only wash  
items marked "dishwasher safe" in  
the dishwasher.  
– Glued items such as old knives with  
handles glued together around the  
shank of the blade  
– Handmade craft items, antique,  
metal trimmed or decorative  
glassware  
– If fine glassware is washed in the  
dishwasher select the "China &  
Crystal" program*. This will reduce  
the risk of clouding.  
– Plastic items that are not heat  
resistant  
– Copper, brass, tin or aluminum  
Silver and aluminum:  
– Dishes with color painted over the  
glaze. These dishes may fade over  
time  
– Silver or aluminum items may tarnish.  
– Silverware previously cleaned with a  
silver polish may be damp or spotted  
at the end of a program where water  
has adhered to the polish. This can  
be rubbed off with a soft, dry cloth.  
Silver that has been cleaned in an  
immersion dip is usually dry at the  
end of a program, but may tarnish.  
– Fine glassware and crystal items  
should only be washed using the  
"China & Crystal" program*.  
Otherwise clouding or etching may  
occur after frequent washing.  
– Cast iron pots and pans  
– If left to dry, foods containing sulfur  
can discolor silver. These include  
egg yolk, onions, mayonnaise,  
mustard, fish and marinades.  
* depending on model  
– Silverware may tarnish or pit if  
washed next to stainless steel.  
Leave space between these metals.  
If unsure whether your china and  
crystal are dishwasher safe, please  
check with the manufacturer. The  
China & Crystal program*, although  
extremely gentle and thorough can  
cause the china and crystal to "wear"  
if they are not dishwasher safe.  
– Clean aluminum items, e.g. grease  
filters, with domestic dishwasher  
detergent only.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Typical load for 10 place settings with cutlery tray  
Upper basket  
Lower basket  
Cutlery tray  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Typical load for 16 place settings with cutlery tray  
Upper basket  
Lower basket  
Cutlery tray  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Upper basket  
Adjustable cup rack  
(depending on model)  
,Always use the dishwasher with  
the upper and lower basket in place.  
^ Raise the rack to make room for tall  
glasses.  
Glasses can also be leaned against the  
cup rack so they are more stable.  
^ Lower it to double stack smaller  
pieces.  
^ Load the upper basket with small,  
lightweight, or delicate items such as  
cups, saucers, glasses, dessert  
bowls and flat pans.  
Long items such as soup ladles, mixing  
spoons and long knives should be  
placed lying down across the front of  
the upper basket.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Adjusting the upper basket  
To adjust the upper basket downwards:  
In order to gain more space for taller  
items the upper basket can be adjusted  
on three levels with 2 cm between each  
level.  
^ Pull up on the levers at the sides of  
the upper basket.  
^ Adjust the basket to the desired  
height and then release the levers to  
lock the basket in place.  
The upper basket can also be set at an  
angle with one side high and the other  
side low. Make sure, however, that the  
basket can slide smoothly in and out of  
the cabinet.  
Depending on the setting of the upper  
basket, the following plate dimensions  
can be accommodated.  
Depending on the setting of the upper  
basket, a variety of plate dimensions  
can be accommodated.  
^ Slide out the upper basket.  
To adjust the upper basket upwards:  
^ Lift the basket up until it clicks into  
place.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Lower basket  
Heavily soiled items  
^ Place larger and heavier items such  
as plates, serving platters,  
saucepans, bowls, etc. in the lower  
basket.  
It can also be used for glasses, cups,  
small plates and saucers.  
Dishwasher with cutlery tray  
^ Place very large plates in the centre  
of the lower basket.  
Dishwasher with cutlery basket  
When tilted, plates up to 35 cm in  
diameter can be accommodated.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Cutlery tray  
(depending on model)  
Spoons with thick handles may have to  
be placed as knives and forks with their  
heads in the holders.  
^ Arrange the cutlery as shown in the  
cutlery tray.  
For easier unloading cutlery should be  
grouped in zones, one for knives, one  
for forks, one for spoons, etc.  
Place knives with the cutting edge  
down and forks with the prongs  
between the holders. Spoons should be  
placed in the opposite direction with  
the handles between the holders so  
that water can run off more easily.  
The upper spray arm must not be  
blocked by tall cutlery items.  
The cutlery tray insert is removable.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Cutlery basket  
(depending on model)  
Cutlery insert for the cutlery basket  
The cutlery basket can be placed  
anywhere on the front rows of spikes in  
the lower basket.  
^ To avoid risk of injury, knives and  
forks should be placed with the  
handles upwards in the basket.  
However, cutlery placed handle  
down in the basket will come out  
cleaner and drier.  
^ Place small items of cutlery in the  
individual slots on three sides of the  
cutlery basket.  
Use the insert supplied for heavily  
soiled items of cutlery.  
The insert separates the items so that  
they can be reached better by the  
spray jets.  
^ Fit it onto the cutlery basket if  
required.  
^ Insert cutlery with the handles facing  
downwards, and distribute them  
evenly along the insert.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
Optional dishwasher accessories are available from your Miele dealer, Miele or  
Mieleusa.com (depending on your model some may already be supplied with your  
machine as standard).  
If you would like to...  
the following accessory will need  
to be ordered...  
...wash a Miele Cappuccinatore  
...wash additional items of cutlery  
...wash long-stemmed glassware  
... a Cappuccinatore insert for the  
upper basket.  
... a cutlery basket for the lower  
basket.  
... a glassware rack for the lower  
basket.  
MieleCare Collection  
Miele branded cleaning and care products, including dishwasher salt, detergent  
and rinse aid, are available to order from your Miele dealer, Miele or the on-line  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Detergent  
You can use powder, gel or tab  
detergents. Follow the dosage  
information on the detergent  
packaging.  
,Dishwasher detergents contain  
irritant and corrosive ingredients.  
Avoid inhaling or swallowing  
dishwasher detergent.  
Detergent tabs are not recommended  
for use with the program "Express". The  
tabs may not dissolve completely.  
Keep children away from detergent.  
Keep detergent out of the reach of  
children. Keep children away from  
the dishwasher when the door is  
open. There could still be detergent  
residues in the dishwasher. Only  
add detergent just before starting  
the program and lock the door with  
the child safety lock (depending on  
model).  
Dishwasher cleaning products are  
available from MIele.  
,Only use detergents formulated  
for domestic dishwashers.  
Use only the recommended amount  
of detergent. Continued use of too  
much detergent may cause machine  
damage.  
When using the "China & Crystal"  
program (depending on model)  
reduce the amount of detergent  
used to at least ½ of the normal  
dosage. Also make certain your  
china and crystal are dishwasher  
safe.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Adding detergent  
^ Add detergent to the compartments  
and close the container flap.  
^ Press the latch on the detergent  
^ Use one tab or add powder or gel  
detergent to compartment II and  
close the flap.  
dispenser. The flap will spring open.  
The flap is always open at the end of a  
program.  
^ If a Pre-rinse is desired, and  
available for your chosen program,  
add 1 teaspoon (5 ml) of detergent to  
compartment I.  
Compartment I holds a maximum of 2  
teaspoons (10 ml),  
compartment II holds a maximum of 3.5  
tablespoons (50 ml) of detergent.  
The horizontal marks in compartment II  
indicate the levels of approximately 1 ¼  
and 2 tablespoons (20 and 30 ml)  
respectively. The marks indicate the  
approximate fill level in ml when the  
door is open in a horizontal position.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Turning the dishwasher on  
^ Open the water supply if it is closed.  
^ Open the door.  
Starting a program  
^ Close the door to start the program.  
Cancel a program only in the first  
few minutes.  
^ Make sure the spray arms can rotate  
freely.  
Otherwise important program steps  
(e.g. water softening) may be  
canceled.  
^ Press the K button to turn the  
dishwasher on.  
The K indicator light and the program  
indicator light come on.  
Selecting a program  
Choose the program according to the  
type of dishware and soiling.  
See "Program guide" for a description  
of the programs and their applications.  
^ Use the Program button to select the  
desired program.  
The indicator light for the selected  
program comes on.  
The time display shows the runtime of  
the selected program in hours and  
minutes.  
You can now select additional  
options (see "Additional options").  
If additional options are selected, the  
corresponding indicator lights will also  
come on.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Program  
guide  
When to use  
Program sequence  
Pre-rinse  
Main Interim rinse Final Drying  
wash  
rinse  
1
X
2
1
X
2
Pots & Pans  
For normally soiled  
pots & pans with  
dried on food, and  
heavily soiled  
X
X
X
dishware, use 120%  
detergent  
recommended.  
Normal  
Program for  
as required  
X
X
X
X
completely washing a  
full load of normally  
soiled dishware with  
the ability to adjust  
energy and water  
consumption based on  
the soil load of the  
dishware.  
Economy  
For normally soiled  
dishware, energy  
X
X
X
X
saving program with a  
long soaking time and  
a low temperature  
SaniWash  
To sanitize dishware,  
e.g. baby bottles,  
X
X
X
X
cutting boards and  
preparation dishware.  
Rinse & Hold  
To rinse dishes when a  
complete program is  
not needed.  
X
Usage:  
Electrical - 0.01 - 1.23 kWh  
Water - 1.3 - 6.3 gal (5 - 24 l)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Time display  
Standby  
Before the program starts, the time  
display shows the time of the selected  
program in hours and minutes. The  
remaining time is displayed during the  
program.  
A few minutes after the last button is  
pressed or a few minutes after the end  
of the program the dishwasher will  
switch to Standby mode to save  
energy. The time display and the  
indicator lights are turned off and only  
the K indicator light flashes slowly.  
The time that is displayed may vary for  
the same program. It depends on the  
temperature of the incoming water, the  
reactivation cycle, the type of detergent  
and the quantity and soiling of the  
dishes.  
^ Press the K button if you want to turn  
the indicator lights back on.  
If the dishwasher is not turned off after  
the program ends, after a few minutes  
When a program is selected for the first in standby mode it will turn off  
time, the display shows an average  
program time for cold water.  
completely (see Additional options -  
Optimizing Standby).  
With every program, the electronics  
correct the time according to the  
temperature of the incoming water and  
the size of the load.  
If refill rinse aid or a fault is  
displayed while a program is  
running, the dishwasher will not  
switch to Standby mode.  
If you use a Tab detergent, you can  
deactivate the refill messages and  
let the dishwasher go into Standby  
mode (see Before using for the first  
time).  
However, fault messages cannot be  
turned off.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
At the end of a program  
Preparing your appliance for  
an extended vacation  
^ Open the door slightly to check  
whether the program has finished.  
If you elect to turn off the water to your  
home for an extended period of time,  
please note that this may not be  
The program has ended if the time  
display shows a 0.  
enough to reduce the risk of a leak.  
The program has not yet finished as  
long as the program indicator light is  
still flashing. Close the door again so  
that the program runs to the end.  
To be completely safe, you must  
turn off the water supply to each  
individual appliance. This means  
under the sink for a dishwasher, at  
the laundry bib for your washer, etc.  
Dishes tends to chip if removed still hot  
from the dishwasher.  
Let the dishware cool.  
After turning off the dishwasher open  
the door slightly. The dishes will cool  
much faster.  
^ Unload the dishwasher.  
Unloading the lower basket first will  
prevent water drops from the upper  
basket and cutlery tray (depending on  
model) from dropping onto dishes in  
the lower basket.  
^ Turn the dishwasher off s.  
The dishwasher continues to use  
electricity until turned off with the  
s button.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Interrupting a program  
Changing a program  
A program will be interrupted as soon  
as the door is opened.  
Do not change the program if the  
detergent dispenser flap is already  
open.  
When the door is closed again, the  
program will continue from where it was  
interrupted.  
If a program has already started and  
you wish to change it:  
,Open the door with care. The  
water in the dishwasher is hot.  
Danger of scalding. Before closing  
the door again, leave it ajar for  
approx. 20 secs. This will enable the  
temperature in the wash cabinet to  
settle. Close the door firmly until it  
clicks into place.  
^ Open the door.  
^ Press the K button to turn the  
dishwasher off.  
^ Press the K button to turn the  
dishwasher back on.  
^ Use the Program button to select the  
desired program.  
^ Close the door to start the program.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Turbo  
Delay start  
The Turbo function reduces the  
program runtimes in programs where  
the option is available.  
The start time of a program can be  
delayed. The start time can be delayed  
from 30 minutes to 24 hours. The delay  
is set in 30 minute increments.  
Energy consumption will increase to  
achieve optimum results.  
For a delay start time between 30  
minutes and 9 hours 30 minutes, the  
delay is set in 30 minute increments.  
For a delay start time of 10 hours or  
more, the delay is set in increments of  
one hour.  
^ Open the door.  
^ Press the K button to turn the  
dishwasher on.  
The K indicator light comes on.  
^ Select the desired program.  
^ Press the Turbo button.  
When using the Delay start function,  
make sure that the detergent  
compartment is dry before adding  
detergent. Wipe dry if necessary.  
Otherwise the detergent could  
clump and not be rinsed out  
completely.  
The Turbo indicator light comes on.  
^ Now you can start a program.  
Once selected, the function will remain  
active for all programs until the setting  
is changed.  
Do not use liquid detergent. Liquid  
detergent could leak out of the  
compartment.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
^ Open the door.  
Delay start time shown in the time  
display:  
^ Press the K button to turn the  
dishwasher on.  
up to 59 minutes:  
e.g. 30 minutes = 30  
The K indicator light comes on.  
1 hour to 9 hours 30 minutes:  
^ Use the Program button to select the  
e.g. 5 hours = 5.00  
desired program.  
more than 10 hours:  
^ Press the , button.  
e.g. 15 hours = 15^  
The last Delay start time will appear in  
the time display. The , indicator light  
comes on.  
Starting a program before Delay start  
has elapsed:  
^ Set the desired Delay start time using  
A program can be started before the  
Delay start time has elapsed. Do the  
following:  
the , button.  
If you keep the , button pressed, the  
time will increase automatically to 24^.  
To start at 30 minutes again, press the  
, button twice.  
^ Open the door.  
^ Press the K button to turn the  
dishwasher off.  
^ Close the door.  
^ Press the K button to turn the  
dishwasher back on.  
The time counts down to the program  
start: more than 10 hours, in steps of 1  
hour, less than 10 hours in  
minute-steps.  
^ Use the Program button to select the  
desired program.  
^ Close the door to start the program.  
When the set time is reached, the  
selected program will start  
automatically. The remaining runtime is  
displayed, the , indicator goes out  
and the indicator light of the selected  
program comes on.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Buzzer  
^ Press the Turbo button four times.  
A buzzer sounds at the end of a  
program and when a fault occurs.  
The Turbo indicator light shows 4 short  
flashes in intervals.  
The buzzer at the end of a program  
sounds four times in intervals with a  
short pause.  
The flashing in the time display shows  
whether the program end buzzer is  
turned on or off:  
The fault buzzer sounds four times in an – "p 1": buzzer is on  
interval without pausing.  
– "p 0": buzzer is off.  
The buzzer is activated by default.  
^ Press the Program button if you wish  
It can be turned off so that it does not  
sound at the end of a program. The  
buzzer for a fault cannot be turned off.  
to change the setting.  
The setting is immediately saved.  
^ Open the door.  
^ Press the K button to turn the  
dishwasher off.  
^ Press the K button to turn the  
dishwasher off.  
^ Press and hold the Program button  
and simultaneously turn the  
dishwasher on using the K button.  
Keep the Program button pressed for  
at least four seconds until the lower  
right program indicator lights up.  
If it does not come on, start over.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Memory  
The flashing in the time display shows  
whether Memory is turned on.  
The memory function allows you to save  
the last selected program.  
– "p 1": Memory is on.  
If you turn the dishwasher off and on  
again after a program has finished, the  
last selected program is displayed  
instead of the Economy program.  
– "p 0": Memory is off.  
^ Press the Program button if you wish  
to change the setting.  
^ Open the door.  
The setting is immediately saved.  
^ Press the K button to turn the  
dishwasher off.  
^ Press the K button to turn the  
dishwasher off.  
^ Press and hold the Program button  
and simultaneously turn the  
dishwasher on using the K button.  
Keep the Program button pressed for  
at least four seconds until the lower  
right program indicator lights up.  
If it does not come on, start over.  
^ Press the Turbo button six times.  
The Turbo indicator light shows 6 short  
flashes in intervals.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Optimize Standby  
^ Open the door.  
A few minutes after the last button is  
pressed or a few minutes after the end  
of the program the dishwasher will  
switch to Standby mode to save  
^ Press the K button to turn the  
dishwasher off.  
^ Press and hold the Program button  
and simultaneously turn the  
energy. The time display and the  
indicator lights are turned off and only  
the K indicator light flashes slowly.  
dishwasher on using the K button.  
Keep the Program button pressed for  
at least four seconds until the lower  
right program indicator lights up.  
If the dishwasher is not turned off after  
the program ends, after a few minutes  
in Standby mode it will turn off  
completely.  
If it does not come on, start over.  
^ Press the Turbo button eight times.  
You can also deactivate the Optimize  
Standby function. The time display and  
the indicator lights do not go out, and  
the dishwasher turns off 6 hours after  
the end of the program.  
The Turbo indicator light shows 8 short  
flashes in intervals.  
The flashing in the time display shows  
whether Optimize Standby is turned on.  
– "p 1": Optimize Standby is on.  
This results in higher energy  
consumption.  
– "p 0": Optimize Standby is off.  
If refill rinse aid or a fault is  
displayed while a program is  
running, the dishwasher will not  
switch to Standby mode.  
^ Press the Program button if you wish  
to change the setting.  
The setting is immediately saved.  
^ Press the K button to turn the  
dishwasher off.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Factory defaults  
The flashing in the time display shows  
whether a setting is different from the  
default setting.  
If you have changed any settings, you  
can reset them to the factory defaults.  
– "p 1": all values are set to the default  
^ Open the door.  
settings.  
^ Press the K button to turn the  
dishwasher off.  
– "p 0": at least one setting has been  
changed.  
^ Press and hold the Program button  
and simultaneously turn the  
^ Press the Program button to reset the  
dishwasher to the factory defaults.  
dishwasher on using the K button.  
Keep the Program button pressed for The setting is immediately saved.  
at least four seconds until the lower  
^ Press the K button to turn the  
right program indicator lights up.  
dishwasher off.  
If it does not come on, start over.  
^ Press the Turbo button 12 times.  
The Turbo indicator shows 1 long flash  
and 2 short flashes in intervals.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
,Repairs should only be carried out by a qualified and trained person in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause personal injury or machine damage.  
Technical faults  
Problem  
Possible fault  
Solution  
The dishwasher will The door is not properly Push the door firmly closed.  
not start.  
closed.  
The dishwasher is not  
plugged in.  
Insert the plug.  
The circuit breaker has – Reset the circuit breaker  
tripped.  
(see data plate for the  
correct fuse rating).  
– If the circuit breaker trips  
again, contact Miele.  
The dishwasher is not  
turned on.  
Press the K button and select  
a program.  
The dishwasher  
stops during a  
program.  
The circuit breaker has – Reset the circuit breaker  
tripped.  
(see data plate for the  
correct fuse rating).  
– If the circuit breaker trips  
again, contact Miele.  
The buzzer sounds. There may be a  
Press the K button to turn the  
dishwasher off.  
All the indicator  
lights of the  
technical fault.  
After a few seconds:  
program selection  
flash when the door  
is open.  
– Turn the dishwasher on.  
– Use the Program button to  
select the desired program.  
The time display  
shows fault FXX.  
– Close the door.  
If the indicator lights flash  
again, there is a technical fault.  
– Contact Miele,  
In addition, the drain Fault F70:  
pump may run even The waterproof system  
when the door is reports a fault.  
open.  
– Close the water supply.  
– Contact Miele.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Faults in the water intake or water drain  
Problem  
Possible fault  
Solution  
The dishwasher  
The water supply – Open the water supply all the way.  
stops shortly after is closed.  
the program starts.  
The buzzer sounds.  
The Intake/Drain  
indicator light  
alternates between  
flashing and  
remaining steady  
when the door is  
open.  
The dishwasher  
has stopped.  
Before fixing the fault:  
– Press the K button to turn the  
dishwasher off.  
The buzzer sounds.  
The Intake/Drain  
Fault F12/F13:  
– Open the water supply all the way.  
indicator light  
Water intake fault.  
– Clean the screen in the water  
supply valve (see User  
flashes when the  
door is open.  
"Maintenance instructions).  
The time display  
shows fault FXX.  
– The water pressure at the water  
connection is less than 4.35 psi.  
Consult a plumber.  
Fault F11:  
– Clean the triple filter (see "Cleaning  
and care").  
Water drainage  
fault.  
– Clean the drain pump (see "User  
maintenance instructions").  
There might be  
water in the wash  
cabinet.  
– Clean the non-return valve (see  
"User maintenance instructions").  
– Remove any kinks or high loops in  
the drain hose.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
General problems with the dishwasher  
Problem  
Possible fault  
Solution  
The indicator lights  
The indicator lights and  
Press the K button to come  
out of Standby mode.  
and the time display the time display turn off  
are dark. Only the  
indicator light K  
flashes slowly.  
automatically to save  
energy (Standby).  
There are detergent  
residues in the  
The dispenser was wet  
when detergent was  
Make sure the dispenser is  
dry before adding  
detergent.  
dispenser at the end added.  
of a program.  
The detergent  
Detergent residue is  
Remove the detergent  
residue.  
dispenser flap cannot blocking the latch.  
be closed properly.  
The inside of the door This is normal.  
and/or the interior  
None.  
The moisture evaporates  
after a short time.  
walls are wet after a  
program has finished.  
There is water in the  
wash cabinet at the  
end of a program.  
Before fixing the fault:  
– Press the K button to  
turn the dishwasher off.  
The triple filter in the wash Clean the triple filter (see  
cabinet is clogged.  
"Cleaning and care").  
The drain pump or  
non-return valve is  
blocked.  
Clean the drain pump or the  
non-return valve (see "User  
maintenance instructions").  
There is a kink in the drain Remove the kink.  
hose.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Noises  
Problem  
Possible fault  
Solution  
There is a knocking  
noise in the wash  
cabinet.  
A spray arm is hitting the Interrupt the program and  
dishware.  
rearrange items blocking  
the spray arms.  
There is a rattling  
noise in the wash  
cabinet.  
Dishware is moving  
around in the wash  
cabinet.  
Interrupt the program and  
rearrange loose pieces.  
A foreign object has  
become lodged in the  
drain pump.  
Remove the foreign object  
from the drain pump (see:  
Cleaning the drain pump  
and non-return valve)  
There is a knocking  
noise from the water  
pipe  
This may be caused by  
the installation or the  
This has no effect on the  
dishwasher. If in doubt,  
diameter of the water pipe. contact a plumber.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Poor cleaning results  
Problem  
The dishes are The dishes were not loaded  
not clean. correctly.  
The program was not intensive Select a more intensive  
Possible fault  
Solution  
See "Loading the dishwasher".  
enough.  
program (see "Program  
guide").  
Not enough detergent was  
dispensed.  
Use more detergent, or switch  
to another detergent.  
The spray arms are blocked  
by dishware.  
Check by turning the spray  
arms and rearrange the dishes  
if necessary.  
The triple filter in the wash  
cabinet is clogged or not  
correctly inserted.  
Clean the triple filter or insert it  
correctly.  
Clean the spray arm jets, if  
necessary (see "Cleaning and  
care").  
The spray arm jets might be  
clogged as a result.  
The non-return valve is stuck Clean the drain pump and the  
in the open position. Dirty non-return valve (see "User  
wash water will run back into maintenance instructions").  
the wash cabinet.  
There are streaks The rinse aid dosage is set too Reduce the dosage (see  
on the glasses  
and cutlery.  
high.  
"Rinse aid").  
There is a bluish  
sheen on the  
glasses; the  
deposit can be  
wiped off.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Problem  
Possible fault  
Solution  
Dishes are not dry, The rinse aid dosage is set Refill the reservoir, increase  
orglasses and  
too low or the rinse aid  
the dosage, or switch the  
rinse aid product when  
refilling (see "Rinse aid").  
cutlery are spotty. reservoir is empty.  
Dishes were taken out too  
Leave the dishes in longer  
(see "Use").  
soon.  
You used a multi-function  
detergent with too little  
drying power.  
Switch to another detergent  
or add rinse aid (see "Rinse  
aid").  
White residue is  
visible on the  
dishware.  
The rinse aid dosage is too Increase the dosage (see  
low.  
"Setting the rinse aid  
dosage").  
Clouding occurs  
on glassware and  
cutlery; the  
You used an unsuitable  
multi-function detergent.  
Switch to another detergent.  
Use a normal Tab product or  
a normal powder detergent.  
deposit can be  
wiped off.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Problem  
Possible fault  
Detergent deposits.  
Solution  
Glasses have a  
brownish-blue  
discoloration; the  
deposit cannot be  
wiped off.  
Switch to another detergent  
right away.  
Glasses are dull and The glasses are not  
There is no remedy.  
Use only dishwasher safe  
glasses.  
discolored; the  
deposit cannot be  
wiped off.  
dishwasher-safe. Surface  
changes occur.  
Tea or lipstick stains The wash temperature of  
have not been  
completely removed. too low.  
The bleaching effect of the Switch to another detergent.  
Select a program with a  
the selected program was higher wash temperature.  
detergent is too low.  
Plastic parts are  
discolored.  
Natural dyes, e.g. from  
carrots, tomatoes or  
Use more detergent (see  
"Detergent").  
ketchup, may be the cause. This discoloration is  
Not enough detergent was permanent.  
used or the bleaching effect  
of the detergent is too low.  
There are rust stains The affected items are not There is no remedy.  
on the cutlery. corrosion resistant. Use only dishwasher-safe  
cutlery.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
Repairs  
MieleCare  
In the event of a fault which you cannot  
correct yourself please contact the  
Miele Service Department at the phone  
number on the back of this booklet.  
(USA only)  
MieleCare, our Extended Service  
Contract program, gives you the  
assurance of knowing that your  
^ Please quote the model type and  
appliance investment is covered by  
5 years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory trained professionals can  
guarantee the safety, reliability, and  
longevity of your Miele appliance.  
number of your appliance.  
These can be found on the data plate  
along the right edge of the door.  
PC Update  
The Program Correction (PC) allows a  
technician to update the dishwasher to  
make use of new technology.  
Please note that unless expressly  
approved in writing by Miele’s Service  
department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
When, for example, technological  
developments offer advanced  
modifications to your existing program  
cycles a service technician will be able  
to input these into your machine  
controls via the indicator light marked  
PC. Miele will provide information when  
such possibilities become available.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Maintenance Instructions  
To prevent accidents  
and machine damage,  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Exterior  
Check and clean your dishwasher  
regularly. This will help avoid faults  
and problems.  
^ Only use a conditioner suitable for  
your kitchen cabinetry.  
^ Clean wood with a damp cloth and  
wipe dry.  
,Abrasive cleaning agents,  
all-purpose cleaners, thinner or  
ammonium cleaners should not be  
used on the dishwasher.  
Clean the exterior with a solution of  
warm water and liquid soap applied  
with a soft sponge. Dry with a soft  
cloth.  
They will damage the surface.  
Wash cabinet  
Glass cleaners may be used to  
clean the exterior. However do not  
allow them to sir or puddle, this can  
cause damage to the surface.  
Remove the cleaner promptly.  
Generally, the wash cabinet is self  
cleaning if the correct amount of  
detergent is used.  
The wash cabinet can be cleaned with  
a dishwasher cleaner such as "Dis  
Cleaner" available from your Miele  
To prevent damage to your appliance  
avoid the following:  
– cleaners containing soda, ammonia,  
thinners, or chlorides  
Door and the door seal  
^ Wipe the door seals regularly with a  
– cleaners containing descaling  
agents or lime removers,  
damp cloth to remove food deposits.  
^ Food residue and spilled liquids  
should be wiped from the sides of the  
dishwasher door. These are outside of  
the wash cabinet and are not cleaned  
by water from the spray arms.  
– abrasive cleaners,  
– stainless steel cleaners,  
– dishwasher soap (powder),  
– caustic (oven) cleaners,  
– scouring pads, steel wool, hard  
brushes,  
Control panel  
^ The plastic control panels should  
only be wiped with a damp cloth or  
suitable cleaning agent designed for  
use on plastic.  
– metal scrapers,  
– steam cleaning products.  
,The appliance and front controls  
are not scratch proof.  
Remove spills immediately.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Triple filter system  
The triple filter system in the base of the  
wash cabinet prevents food from being  
redeposited on dishes. It also protects  
the circulation pump from damage  
caused by foreign objects (e.g. broken  
glass, bones). During normal use, the  
filter system is self-cleaning.  
,The machine must not be used  
without all the filters in place!  
^ Check and clean the filter system  
periodically for any trapped or  
foreign objects.  
^ Turn the handle counterclockwise to  
release the triple filter system a.  
The level of soiling and time it takes  
before the filters need cleaning will vary  
depending on your household usage.  
^ Lift the filter combination out of the  
machine b. Remove any solid  
particles and rinse under running  
water. Scrub with a nylon brush if  
necessary.  
^ Turn off the dishwasher before  
cleaning.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
To clean the inside of the filter, the flap  
must be opened.  
^ Return the filter so it lies flat in the  
base of the wash cabinet.  
^ Push the clips together a and open  
the flap b.  
^ Lock the filter by turning the handle  
clockwise.  
^ Rinse under running water.  
,The triple filter system must be  
inserted and locked into place.  
Large particles could get in the  
circulation system and cause a  
blockage.  
^ Close the flap so that the clip  
engages.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the spray arms  
Sometimes particles of food get stuck  
in the spray arm jets. The spray arms  
should be inspected and cleaned every  
4 - 6 months.  
^ Turn off the dishwasher before  
cleaning.  
Removing the spray arms  
^ Remove the cutlery tray (if present).  
^ Push the upper spray arm up to  
engage the inner ratchet and  
unscrew the spray arm.  
^ Pull the lower spray arm firmly  
upwards to remove.  
^ Lift up the middle spray arm, a, to  
engage the ratchet and unscrew the  
spray arm, b.  
^ Use a pointed object such as a  
toothpick to push food particles into  
the spray arm jets.  
^ Remove the lower basket.  
^ Rinse thoroughly under running  
water.  
^ Return the spray arms and check that  
they rotate freely.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the drain pump and  
non-return valve  
If the dishwasher is not completely  
drained at the end of a program, the  
drain pump or non-return valve may be  
blocked.  
^ Turn off the dishwasher and pull the  
plug.  
^ Remove the triple filter (see "Triple  
filter system").  
^ Use a cup or bowl to scoop water out  
of the wash cabinet.  
The drain pump is beneath the  
non-return valve (see arrow).  
^ Remove all foreign objects from the  
drain pump (glass or bone splinters).  
^ Before returning the non-return valve,  
check that the drain pump is not  
blocked. Spin the propeller several  
times in both directions to check for  
obstructions.  
^ Carefully reinsert the non-return valve  
and secure it with the locking clamp.  
,Make sure the locking clamp  
clicks into place!  
^ Tilt the locking clamp to the side a.  
^ Pull out the non-return valve b and  
rinse it under running water.  
^ Remove all foreign objects from the  
non-return valve.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Please refer to the Installation Diagram supplied with these instructions.  
Information is subject to change. Please refer to our website to obtain the most  
current product specification, technical & warranty information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
,Installation, repairs and other  
work by unqualified persons could  
be dangerous.  
,Improper connection of the  
equipment grounding conductor  
can result in electric shock. Do  
not modify the plug provided with  
the appliance; if it will not fit the  
outlet, have a proper outlet  
Check that the voltage, frequency  
and fuse rating shown on the data  
plate match the household mains  
supply.  
installed by a qualified electrician.  
If there is any question  
concerning the proper electrical  
connection or grounding of this  
appliance to the power supply,  
please consult a licensed  
The power outlet must be accessible  
after installation. Do not use an  
extension cord to connect the  
dishwasher to the mains. Danger of  
overheating! See data plate on the  
right side of the door.  
electrician or call Miele’s  
Technical Service Department:  
U 1-800-999-1360  
A damaged power cord must only  
be replaced with a genuine Miele  
cord by a Miele service technician.  
V 1-800-565-6435  
Specifications  
The dishwasher comes equipped with a  
4 ft (1.2 m) power cord with a molded  
plug for connection to 120 V, 60 Hz,  
15 A grounded receptacle.  
GROUNDING INSTRUCTIONS  
THIS APPLIANCE MUST BE  
GROUNDED.  
In the event of a malfunction or  
breakdown, grounding will reduce the  
risk of electric shock by providing a  
path of least resistance for the electrical  
current. This appliance is equipped  
with a cord having an equipment  
grounding conductor and a grounding  
plug. The plug must be plugged into an  
appropriate outlet that is installed and  
grounded in accordance with all local  
codes and ordinances.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
Hardwired electrical connection  
,Prior to making a hardwire  
connection to the terminal, remove  
the power cord. Otherwise there will  
be a risk of electric shock from the  
attached plug.  
It is possible to hardwire this appliance  
to an existing power cable.  
,CAUTION: Before servicing,  
disconnect the power supply by  
either removing the fuse, shutting off  
the power main or manually  
An existing flexible supply cord or  
cable shall have a minimum thickness  
of AWG 14.  
"tripping" the circuit breaker.  
120 V, 60 Hz, 15 A fuse rating  
Installation work and repairs should  
only be performed by a qualified  
technician in accordance with all  
applicable codes and standards.  
Repairs and service by unqualified  
persons could be dangerous and  
the manufacturer cannot be held  
responsible.  
Black wire (live):  
connect to L  
White wire (neutral): connect to N  
Green wire (ground): connect to -  
,After attaching the permanent  
power supply cord, check that all  
screws on the terminal block and the  
strain relief are tightened.  
Before connecting the appliance to  
the power supply, make sure that  
the voltage and frequency listed on  
the data plate correspond with the  
household electrical supply. This  
data must correspond to prevent  
machine damage. Consult an  
electrician if in doubt.  
GROUNDING INSTRUCTIONS  
THIS APPLIANCE MUST BE  
GROUNDED.  
This appliance must be connected to a  
grounded metal, permanent wiring  
system, or an equipment-grounding  
conductor must be run with the circuit  
conductors and connected to the  
equipment-grounding terminal or lead  
on the appliance.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Connection to the water  
supply  
– Water pressure: Must be between  
4.5 - 145 psi (0.3 - 10 bar).  
– If the water pressure if lower, a  
"Water Intake" notification will be  
shown. See "Frequently Asked  
Questions" for more information.  
,Installation, repairs and other  
work by unqualified persons could  
be dangerous.  
– If the water pressure is higher than  
shown, a pressure reducing valve  
must be used.  
,Do not drink water from the  
dishwasher!  
Ensure that the water connection is  
secure after the first use.  
– The dishwasher can heat its own  
water to the temperature required by  
the wash program. This allows for  
connection of the machine to either a  
hot (max. 140°F / 60°C) or cold water  
source.  
,To prevent damage to the  
dishwasher, it must only be  
connected to a fully vented drainage  
system.  
For lowest energy consumption you  
may connect the dishwasher to a  
cold water source.  
For fastest possible wash times, with  
slightly higher energy consumption,  
connect the dishwasher to a hot  
water source.  
,Do not cut the intake hose. If the  
hose is cut, the dishwasher will not  
work. There will be a water leak. If  
the hose is too long, coil it neatly  
and place it behind or under the  
machine.  
– The inlet hose is approximately 5 ft.  
(1.5 m) long.  
– The water inlet hose comes  
equipped with an inlet hose ending  
with a 3/8" female compression  
fitting. This can be directly  
connected to a water supply valve or  
to an appropriate coupling.  
If not connected directly to a water  
supply valve, an appropriate  
adapter (not included) is required.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Drainage  
– The drain hose must not be  
shortened.  
– The machine comes equipped with a  
built-in non-return valve on the  
discharge side to prevent waste  
water from flowing back into the  
dishwasher.  
,Make sure the hose is not kinked  
or cut when pushing the machine  
under the countertop.  
– The dishwasher is equipped with a  
5 ft (1.5 m) flexible drain hose with an  
internal diameter of 7/8" (22 mm).  
Venting the drainage system  
If the dishwasher drain hose is  
connected to a floor drain or to a drain  
pipe that is less than 8" (20 cm) above  
the floor, the drain must be vented.  
Otherwise the water inside the  
dishwasher may siphon out during the  
wash program.  
– Drain hose extensions and adapters  
can be ordered from Miele.  
The maximum drain hose length is  
13 ft. (4 m), max. drain height: 39"  
(1 m).  
– Use the clamp provided to attach the ^ Open the dishwasher door and  
hose to the dishwashers P trap or  
disposal connection (see the  
"Installation Diagram").  
remove the lower basket.  
^ Pull the lower spray arm firmly  
upwards to remove.  
The hose must always be attached  
on the sink side of the P trap.  
When attaching the hose to a  
garbage disposal fitting, make sure  
the plug which is normally blocking  
the fitting is knocked out or  
removed.  
– The hose can be angled to the left or  
right side at the rear of the machine.  
– The existing nipple that the drain  
hose is connected to may be  
^ Cut off the vent cap located at the  
right rear of the triple filter system, as  
illustrated.  
designed for various hose diameters.  
If the nipple diameter is to large or to  
small it should be replaced or an  
adapter may be used. If the nipple  
extends more than 2" (50 mm) into  
the drain hose it should be  
shortened, or the hose could clog.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Noise measurement  
General requirements for measuring noise  
The dishwasher must be loaded with 16 place settings and the Normal program  
must be used.  
Installation requirements for measuring noise  
The dishwasher must be installed as follows:.  
^ Install the dishwasher into an appropriate housing unit.  
^ Secure the front panel.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Noise measurement  
^ Push the insulation mat supplied (depending on model) under the plinth until it  
is up against the appliance feet a.  
^ Attach the toe-kick so that it is flush with the door front b.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 0313  
G4281/G4286 /  
M.-Nr. 09 510 201 / 01  
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST  
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer W 1945 User Manual
Miller Electric Welding System 140 Auto Set User Manual
MTD Chipper 245 650 000 User Manual
MTX Audio Car Amplifier TA8502 User Manual
Napoleon Fireplaces Fire Pit GD82NT PA User Manual
NetComm Network Router NP5400 User Manual
Omega Juicer 8004 8006 User Manual
Onkyo Car Amplifier PA MC5501 User Manual
Panasonic Home Safety Product EY3794 U1 User Manual
Panasonic Telephone KX T4026NZ User Manual