Operating Instructions
Dishwasher
G 5220
G 5225
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 510 211
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Interrupting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Turbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Delay start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Optimize Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Faults in the water intake or water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Noise measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
General requirements for measuring noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Installation requirements for measuring noise. . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
Electrical Safety
Before installation, make sure that
~
the voltage and frequency listed on the
data plate correspond with the
When using your dishwasher, follow
basic precautions, including the
following:
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Read the operating instructions and
installation diagram carefully before
installation or use of the dishwasher
to prevent injury and machine
damage.
Before installation or service,
~
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
Use the dishwasher only for its
intended purpose. This appliance is
intended for residential use only.
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Keep these operating instructions in
a safe place and pass them on to
any future user.
Be certain your appliance is
~
Correct usage
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
The dishwasher is not designed for
~
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as, shops, offices and showrooms
or guest houses.
The dishwasher is not intended for
~
outdoor use.
It must only be used as a domestic
~
appliance as specified in these
If the supplied power cord is
~
damaged it must only be replaced by a
Miele Service technician with a genuine
Miele power cord.
operating instructions, for cleaning
domestic cookware and cutlery. Any
other usage is not supported by the
manufacturer and could be dangerous.
The outlet must be accessible at all
~
times after installation to disconnect the
Persons who lack physical, sensory
~
dishwasher.
or mental abilities, or experience with
the appliance should not use the
dishwasher without supervision or
instruction by a responsible person.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
This dishwasher should only be
~
installed under a continuous counter
The dishwasher must be installed
~
and connected in accordance with the
installation instructions.
top secured to adjacent cabinetry.
Do not install this dishwasher
~
beneath a cooking surface, oven or any
Installation and repair work should
~
appliance that radiates heat.
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
High temperatures from these units
may damage the dishwasher.
A toe-kick must be used with the
~
dishwasher. If the supplied toe-kick is
not used, a cabinet matching toe-kick
must be installed.
Do not install or use a damaged
~
dishwasher. A damaged appliance is
dangerous. Unplug the machine and
contact Miele Technical Service
Department.
Do not install the dishwasher in an
~
area where it will be exposed to
temperatures below freezing.
Ensure that any plastic wrappings,
~
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Do not cut the intake hose or
~
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
This appliance must not be used in
~
a non-stationary location (e.g. on a
boat).
Only power up the dishwasher when
~
all installation and plumbing work is
complete.
, WARNING - Fire hazard!
~
Do not cover or crush the plug of the
appliance. Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug and cord.
Installing the dishwasher in a tight
Do not place hose or power cord
~
next to a heat source e.g. hot water
pipes.
Do not expose hose or power cord to
space may crimp the power cord or put corrosive substances.
pressure on the plug which could Damage of hose or power cord could
cause overheating. cause electrical shock or water
damage!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
Do not inhale or swallow detergents.
~
Dishwasher detergents contain irritant
To reduce the risk of injury, do not
~
allow children to play in, on or near the
and corrosive ingredients. They can
cause burning in the mouth and throat if
swallowed, or inhibit breathing. Consult
a doctor immediately if detergent has
dishwasher. It is possible for small
fingers may be pinched in the door.
Only use the dishwasher if all panels been swallowed or inhaled.
~
are properly in place.
Do not drink water from the
~
dishwasher! Harmful residues could be
Do not tamper with the controls.
~
present.
Do not sit or stand on the door or
~
baskets of the dishwasher. Close the
Do not fill the rinse aid reservoir or
~
door when not in use.
salt container with detergent. It will
destroy the rinse aid compartment and
water softener.
Under certain conditions, hydrogen
~
gas may be produced in a hot water
system that has not been used for two
weeks or more. HYDROGEN GAS IS
Dishes can be very hot at the end of
~
a program. Allow the dishes to cool
EXPLOSIVE. If the hot water system has until they are cool enough to handle
not been used for such a period, turn
on all hot water faucets and let water
flow from each for several minutes
before using the dishwasher. This will
release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
before unloading them.
The water supply must be turned off
~
when the appliance is not used for a
longer period of time (e.g. during
vacations).
Disposal of an appliance
Be sure that all items placed in the
~
dishwasher are "dishwasher safe". For
items not labeled, check the
If the appliance is removed from its
~
installation site and will not be used,
remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
manufacturer’s recommendations.
When loading tableware, place
~
sharp items away from the door to
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
SAVE THESE
INSTRUCTIONS
Only use detergents and rinse aids
~
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
a Upper spray arm (not visible)
b Cutlery tray
gTriple filter system
hData plate
c Upper basket
iChild Safety Lock in the door handle
(not visible)
d Middle spray arm
jRinse aid reservoir
e Air inlet for drying
(depending on model)
kDual compartment detergent
dispenser
f Lower spray arm
lSalt container
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
aProgram selection
fDelay start button with indicator light
gTurbo button with indicator light
hProgram button
bTime display
cProgram sequence indicator
dCheck / Refill indicators
eStart/Stop button with indicator light
iK button (On/Off)
This operating instruction manual describes several dishwasher models with
different indicated settings.
The different dishwasher models are named :
Standard = Dishwasher with 31 11/16" (80.5 cm) height (built-in)
or 33 1/4" (84.5 cm) height (stand-alone)
XXL
= Dishwasher with 33 1/4" (84.5 cm) height.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
Disposal of the packing
material
This dishwasher is economical in the
use of water and electricity. For best
results follow these tips:
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
^ For lowest energy consumption you
may connect the dishwasher to a
cold water source.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
^ For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source.
Disposal of an old machine
^ Make full use of the baskets without
overloading for the most economical
washing.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
^ Use the correct amount of detergent
and rinse aid. Detergent dosage is
dependent upon the amount of
soiling and type of dishware being
washed. See the "Program Guide" for
more information.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
^ When using powder or liquid
detergent, reduce the amount to 2/3
of the normal amount when washing
a small load.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
Child safety lock
^ Reach under the handle and pull the
Te child Safety Lock is designed to
prevent children from opening the
dishwasher.
door open.
If the door is opened during operation
the dishwasher will stop running. Once
the door is closed the program will
restart.
^ To lock the door, push the slider
below the door grip to the right.
^ To unlock the door, push the slider to
the left.
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
In areas where the water hardness
fluctuates (e.g. 37-50 °d [39-52 gr/gal])
always program the machine to the
higher value (in this example 50 °d
[52 gr/gal]).
To achieve good cleaning results, the
dishwasher needs soft water (water that
is low in minerals). Hard water results in
calcium deposits on dishware and in
the dishwasher.
If there is a fault, it will help the service
If your tap water hardness is above 4 °d technician to know the hardness of your
(4 gr/gal) the water should be softened. local water supply.
The built-in water softener is designed
Please note your water hardness
below:
for this purpose. The water softener is
suitable for a water hardness up to
70 °d (73 gr/gal).
°d (gr/gal)
– If using "Tab" detergent products you
do not need to add salt, depending
on the water hardness ß 22 gr/gal
(21 °d) (see "Detergents").
The water hardness was programmed
at 1 °d (1 gr/gal) by factory default.
– The dishwasher must be correctly
programmed to match the hardness
of your water.
– Your local water authority will be able
to advise you of the exact water
hardness level in your area.
If the hardness of your local supply
is constantly lower than 4 °d (4
gr/gal), you do not need to add
water softener salt. However the
water hardness level must still be
programmed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Programming the water
softener
Value
°d
gr/gal
displayed
1
2
1
2
1
To exit the programming mode at
any time turn the dishwasher off with
the K button.
2
3
3
3
4
4
4
5
5
5
6
6
6
^ Press the K button to turn the
dishwasher off.
7
7
7
8
8
8
9
9
9
^ Press and hold the "Start / Stop"
button and turn the dishwasher on
simultaneously using the K button.
Keep the "Start / Stop" button
pressed for at least four seconds until
the "Start / Stop" indicator light comes
on.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-50
51-60
61-70
10
11
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
39-52
53-63
64-73
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
50
60
70
If it does not come on, start over.
^ Now press the "Delay Start" button
twice.
The characters "P 1 5" will flash one
after the other in the display. This
means that the water hardness level
has been set at 15 °d [16 gr/gal (factory
setting)].
The value which has been set for the
water hardness is shown as a figure
after the "P" in the display (see chart).
^ Use the "Start / Stop" button to select
the flashing rhythm that corresponds
to your water hardness level.
With each press of the button the
value will raise one level. Once the
highest value is reached the setting
will start again from the beginning.
^ Press the K button to turn the
dishwasher off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Checking the programmed water
hardness
^ Press the K button to turn the
dishwasher off.
^ Press and hold the "Start/Stop" button
and turn the dishwasher on
simultaneously using the K button.
Keep the "Start/Stop" button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
^ Press the "Delay Start"" button twice.
The Delay Start indicator will flash twice
briefly in intervals.
Character will flash in sequence in the
display.
The number at the "P" is the value for
the water hardness level which has
been set (see chart).
^ Press the K button to turn the
dishwasher off.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
Important: The salt container must
be filled with 2 quarts (2 l) of water
before adding salt for the first time
so the salt can dissolve
properly. Water does not have to be
added with subsequent refills.
Filling the salt container
,Inadvertently filling the salt
container with dishwashing
detergent (including liquid
detergent) will damage the water
softener.
,Only use water softener salt
specially formulated for
dishwashers. Other salts may
contain insoluble additives which
can impair the water softener.
^ Place the provided funnel over the
salt container and carefully fill it with
salt. The salt container holds approx.
4.4 lbs (2 kg) of salt, depending on
the type of salt.
If using "Tab" products which
include salt, still add salt to the
machine to achieve optimal cleaning
results and ensure long-term
^ Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
functioning of the water softener.
^ Remove the lower basket from the
wash cabinet and unscrew the salt
container lid.
^ Immediately after each refill, run the "
Express" program without a load (no
"Turbo" function if available). This will
remove any traces of salt from inside
the wash cabinet.
When opening the salt container,
water will run out. Open the
container only to refill salt.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Refill salt message
^ When the "Salt" indicator light comes
on, refill the salt after the program
has finished.
After the container has been filled, the
"Salt" indicator light can remain on for a
short time. It will go out once the
reactivation process is complete.
The "Salt" indicator light is turned off if
you have programmed the dishwasher
to a water hardness below 4 °d
(4 gr/gal).
,Immediately after each refill, run
the "Express" program without a load
(no "Turbo" function if available).
This will remove any traces of salt
from inside the wash cabinet.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Deactivate indicators
The characters flashing in the display
will show whether the refill indicators
are turned on or off.
If you only ever use "Tab" detergent
products in your dishwasher, you can
switch both messages off if you wish.
– "P 1": the refill indicators are turned
on.
^ Turn the dishwasher off with the K
button.
– "P 0": the refill indicators are turned
off.
^ Press and hold the "Start/Stop" button
and turn the dishwasher on
^ Press the "Start/Stop" button if you
simultaneously using the K button.
Keep the "Start/Stop" button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
wish to change the setting.
The setting is saved immediately.
^ Press the K button to turn the
dishwasher off.
If it does not come on, start over.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
^ Press the "Delay start" button nine
times.
The "Delay start" indicator will flash
briefly 9 times in intervals.
replenish the salt and rinse aid and
to switch the indicators back on.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid is needed to prevent spotting
on dishes and glassware.
The rinse aid is filled in the reservoir
and the set amount will be
automatically dosed.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
When using "Tab" detergents rinse
aid is not needed.
The rinse aid reservoir holds approx.
3.7 oz (110 ml).
Adding rinse aid
^ Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
^ Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
^ Press the button in the direction of
the arrow until the flap springs open.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid indicator
When the Rinse aid indicator first
comes on, there will be enough rinse
aid left for 2 - 3 washes.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
If you only ever use "Tab" detergent
products in your dishwasher, you can
switch the reminders for salt and
rinse aid off if you wish (see "Before
using for the first time - Refill salt
message").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the indicators back on.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Adjusting the dosage
P 3 will flash in the display. This means
that the rinse aid dosage has been set
to 3 ml at the factory.
In order to obtain an optimal cleaning
result you can adjust the dosing
quantity of the rinse aid.
The dosage set will show in the display
after the P.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 0 to 6.
^ Select the desired setting with the
"Start / Stop" button. Every touch of
the button increases the level.
– Use a higher setting if spots appear
on dry glassware.
The programmed dosage is saved.
^ Turn the dishwasher off "s".
^ Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "s".
^ Press the "Start / Stop" button and at
the same time turn the dishwasher on
s. Hold the "Start / Stop" button until
the "Start / Stop" indicator comes on.
If it does not come on, start over.
^ Press the "Delay Start" button three
times.
The "Delay Start" indicator will flash
briefly three times in intervals.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
Wax, grease and paint will cause
permanent discoloration and
damage to the dishwasher.
^ Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
^ Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
^ Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
^ All items can be placed anywhere in
the baskets.
^ Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
^ Make sure that all items are securely
positioned.
^ Hollow items such as cups and
glasses should be placed upside
down in the baskets.
^ To ensure good water coverage, tall,
narrow and hollow items, i.e. vases
or champagne glasses, should be
placed in the center of the basket
rather than in the corners.
^ Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
– Cutlery with wooden handles
– Wooden cutting boards
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
– Glued items such as old knives with
handles glued together around the
shank of the blade
– Handmade craft items, antique,
metal trimmed or decorative
glassware
– If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
– Plastic items that are not heat
resistant
– Copper, brass, tin or aluminum
Silver and aluminum:
– Dishes with color painted over the
glaze. These dishes may fade over
time
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
– Cast iron pots and pans
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
* depending on model
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
If unsure whether your china and
crystal are dishwasher safe, please
check with the manufacturer. The
China & Crystal program*, although
extremely gentle and thorough can
cause the china and crystal to "wear"
if they are not dishwasher safe.
– Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 10 place settings with cutlery tray
Upper basket
Lower basket
Cutlery tray
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 16 place settings with cutlery tray
Upper basket
Lower basket
Cutlery tray
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 10 place settings with cutlery basket
Upper basket
Lower basket
Cutlery basket
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Typical load for 13 place settings with cutlery basket
Upper basket
Lower basket
Cutlery basket
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Adjustable cup rack
(depending on model)
,Always use the dishwasher with
the upper and lower basket in place.
^ Raise the rack to make room for tall
glasses.
Glasses can also be leaned against the
cup rack so they are more stable.
^ Lower it to double stack smaller
pieces.
^ Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
Long items such as soup ladles, mixing
spoons and long knives should be
placed lying down across the front of
the upper basket.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjusting the upper basket
To adjust the upper basket downwards:
In order to gain more space for taller
items the upper basket can be adjusted
on three levels with 2 cm between each
level.
^ Pull up on the levers at the sides of
the upper basket.
^ Adjust the basket to the desired
height and then release the levers to
lock the basket in place.
The upper basket can also be set at an
angle with one side high and the other
side low. Make sure, however, that the
basket can slide smoothly in and out of
the cabinet.
Depending on the setting of the upper
basket, the following plate dimensions
can be accommodated.
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
^ Slide out the upper basket.
To adjust the upper basket upwards:
^ Lift the basket up until it clicks into
place.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
Heavily soiled items
^ Place larger and heavier items such
as plates, serving platters,
saucepans, bowls, etc. in the lower
basket.
It can also be used for glasses, cups,
small plates and saucers.
Dishwasher with cutlery tray
^ Place very large plates in the center
of the lower basket.
Dishwasher with cutlery basket
When tilted, plates up to 13 3/4"
(35 cm) in diameter can be
accommodated.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
MultiComfort zone
Foldable spikes (depending on the
model)
The rear section of the lower basket is
used for cups, glasses, plates, pots
and pans.
The spikes at the front are used for
plates, soup bowls, platters, desert
bowls, and saucers.
^ The glass rack can be folded up to
make more room for tall items.
The rows of spikes can be folded down
to create more room for larger
^ Stemware, e.g. wine, champagne
and beer glasses, can be leaned
against the glass rack or suspended
from it.
cookware, e.g. pots, pans and bowls.
The height of the glass rack is
adjustable.
^ Press the yellow lever down a and
fold the spikes down b.
^ Slide the glass rack to the desired
height until the catches click into
place at the top and rest on the
bottom.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery tray
(depending on model)
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
^ Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge
down and forks with the prongs
between the holders. Spoons should be
placed in the opposite direction with
the handles between the holders so
that water can run off more easily.
The upper spray arm must not be
blocked by tall cutlery items.
The cutlery tray insert is removable.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery basket
Cutlery insert for the cutlery basket
(depending on model)
Use the insert supplied for heavily
soiled items of cutlery.
The insert separates the items so that
they can be reached better by the
spray jets.
The cutlery basket can be placed
anywhere on the front rows of spikes in
the lower basket.
^ To avoid risk of injury, knives and
forks should be placed with the
handles upwards in the basket.
However, cutlery placed handle
down in the basket will come out
cleaner and drier.
^ Fit it onto the cutlery basket if
required.
^ Place small items of cutlery in the
individual slots on three sides of the
cutlery basket.
^ Insert cutlery with the handles facing
downwards, and distribute them
evenly along the insert.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Optional dishwasher accessories are available from your Miele dealer, Miele or
Mieleusa.com (depending on your model some may already be supplied with your
machine as standard).
If you would like to...
the following accessory will need
to be ordered...
...wash a Miele Cappuccinatore
...wash additional items of cutlery
...wash long-stemmed glassware
... a Cappuccinatore insert for the
upper basket.
... a cutlery basket for the lower
basket.
... a glassware rack for the lower
basket.
MieleCare Collection
Miele branded cleaning and care products, including dishwasher salt, detergent
and rinse aid, are available to order from your Miele dealer, Miele or the on-line
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Detergent
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging.
,Dishwasher detergents contain
irritant and corrosive ingredients.
Avoid inhaling or swallowing
dishwasher detergent.
Detergent tabs are not recommended
for use with the program "Express". The
tabs may not dissolve completely.
Keep children away from detergent.
Keep detergent out of the reach of
children. Keep children away from
the dishwasher when the door is
open. There could still be detergent
residues in the dishwasher. Only
add detergent just before starting
the program and lock the door with
the child safety lock (depending on
model).
Dishwasher cleaning products are
available from MIele.
,Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
When using the "China & Crystal"
program (depending on model)
reduce the amount of detergent
used to at least ½ of the normal
dosage. Also make certain your
china and crystal are dishwasher
safe.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Adding detergent
^ Add detergent to the compartments
and close the container flap.
^ Press the latch on the detergent
^ Use one tab or add powder or gel
detergent to compartment II and
close the flap.
dispenser. The flap will spring open.
The flap is always open at the end of a
program.
^ If a Pre-rinse is desired, and
available for your chosen program,
add 1 teaspoon (5 ml) of detergent to
compartment I.
Compartment I holds a maximum of 2
teaspoons (10 ml),
compartment II holds a maximum of 3.5
tablespoons (50 ml) of detergent.
The horizontal marks in compartment II
indicate the levels of approximately 1 ¼
and 2 tablespoons (20 and 30 ml)
respectively. The marks indicate the
approximate fill level in ml when the
door is open in a horizontal position.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Turning the dishwasher on
Starting a program
^ Make sure the spray arms can rotate
^ Press the Start/Stop button.
freely.
The program starts. The Start/Stop and
Rinse indicators and the indicator for
the selected program come on.
If additional options are selected, the
corresponding indicator lights will also
come on.
^ Close the door.
^ Open the water supply if it is closed.
^ Press the K button to turn the
dishwasher on.
The Start/Stop indicator flashes, and
the indicator for the last selected
program comes on.
Cancel a program only in the first
few minutes.
Otherwise important program steps
(e.g. water softening) may be
cancelled.
Selecting a program
Choose the program according to the
type of dishware and soiling.
See Program guide for a description of
the programs and their applications.
^ Use the Program button to select the
desired program.
The indicator light for the selected
program comes on.
The time display shows the runtime of
the selected program in hours and
minutes.
You can now select additional
options (see Additional options).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Program guide
When to use
Program sequence
Pre-rinse Main
wash
Interim
rinse
Final Drying
rinse
1
2
1
2
Pots & Pans
For normally soiled pots &
pans with dried on food, and
heavily soiled dishware, use
120% detergent
X
X
X
X
X
recommended.
Normal
Program for completely
as
X
X
X
X
washing a full load of
required
normally soiled dishware with
the ability to adjust energy and
water consumption based on
the soil load of the dishware.
China & Crystal
For temperature sensitive
glassware and lightly soiled
dishware, use 50% detergent
recommended.
as
requi
red
X
as required
X
X
SaniWash
Express
To sanitize dishware, e.g.
baby bottles, cutting boards
and preparation dishware.
X
X
X
X
X
X
X
"Quick program" for lightly
soiled dishware, e.g. party
dishware, not suitable for
detergent tabs.
X
Rinse & Hold
To rinse dishes when a
complete program is not
needed.
X
Usage:
Electrical: 0.01 - 1.23 kWh
Water: 1.1 - 5 gal (4 - 19 l)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Time display
Standby
Before the program starts, the time
display shows the time of the selected
program in hours and minutes. The
remaining time is displayed during the
program.
A few minutes after the last button is
pressed or a few minutes after the end
of the program the dishwasher will
switch to Standby mode to save
energy. The time display and the
indicator lights are turned off and only
the Start/Stop indicator light flashes
slowly.
The time that is displayed may vary for
the same program. It depends on the
temperature of the incoming water, the
reactivation cycle, the type of detergent ^ Press the K button if you want to turn
and the quantity and soiling of the
dishes.
the indicator lights back on.
If the dishwasher is not turned off or
When a program is selected for the first opened after the program ends, after a
time, the display shows an average
program runtime for cold water.
few minutes in standby mode it will turn
off completely (see Additional options -
Optimize Standby).
With every program, the electronics
correct the runtime according to the
temperature of the incoming water and
the size of the load.
If Salt and/or Rinse aid or a fault is
displayed, the dishwasher will not
switch to Standby mode.
If you use a Tab detergent, you can
deactivate the refill indicators to let
the dishwasher go into Standby
mode.
However, fault messages cannot be
turned off.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Program sequence indicator
The dishes will cool much faster if you
open the door when the program has
ended.
After a program has started, the
program sequence indicator displays
the respective program step.
Unload the lower basket first, then the
upper basket and then the cutlery tray
(depending on the model).
At the end of a program
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.
The program has ended when a 0
appears in the time display and "End"
lights up in the program sequence
display.
Preparing your appliance for
an extended vacation
If the Express program was
selected, the drying fan will run for a
few minutes after the program has
ended.
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
^ Open the door.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
^ Press the K button to turn the
dishwasher off.
The dishwasher will continue to use
electricity until it is turned off with the K
button.
,If you would like to open the
door at the end of the program, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the counter top because the fan is
no longer running.
^ Unload the dishwasher.
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Use
Interrupting a program
Changing a program
A program will be interrupted as soon
as the door is opened.
Do not change the program if the
detergent dispenser flap is already
open.
When the door is closed again, the
program will continue from where it was
interrupted.
If a program has already started and
you wish to change it:
,Water in the dishwasher is hot.
Risk of scalding!
^ Press the Start/Stop button for at
least one second.
Only open the door if absolutely
necessary and be very careful.
Before closing the door again, leave
it slightly ajar for approx.
The program will be canceled.
^ Select and start the desired program.
20 seconds. This will allow the
temperature in the wash cabinet to
settle. Then push the door firmly
shut until it clicks into place.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Turbo
The "Turbo" function can be used to
reduce the program run-times, in
programs in which the option is
available.
Energy consumption will increase to
achieve optimum results.
^ Press the K button to turn the
dishwasher on.
The Start/Stop indicator light flashes.
^ Select the desired program.
^ Press the Turbo button.
The Turbo indicator light comes on.
^ Now you can start a program.
Once selected, the function will remain
active for all programs until the setting
is changed.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Delay start
^ Press the K button to turn the
dishwasher on.
The start time of a program can be
delayed. The start time can be delayed The Start/Stop indicator light flashes.
from 30 minutes to 24 hours. The delay
^ Use the Program button to select the
is set in 30 minute increments.
desired program.
For a delay start time between 30
^ Press the Delay start button.
minutes and 9 hours 30 minutes, the
delay is set in 30 minute increments.
For a delay start time of 10 hours or
more, the delay is set in increments of
one hour.
The last Delay start time will appear in
the time display. The Delay start
indicator light comes on.
^ Set the desired Delay start time using
the Delay start button.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry if necessary.
Otherwise the detergent could
clump and not be rinsed out
completely.
If you keep the button pressed, the time
will increase automatically to 24^. To
start at 30 minutes again, press the
Delay start button twice.
^ Press the Start/Stop button.
The Start/Stop indicator light comes on.
Do not use liquid detergent. Liquid
detergent could leak out of the
compartment.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
The time will count down to the
Starting a program before Delay start
program start: for more than 10 hours in has elapsed:
1 hour increments, for less than 10
A program can be started before the
hours in 1 minute increments.
Delay start time has elapsed. Do the
following:
When the set time is reached, the
selected program will start
^ Press the Start/Stop button for at
automatically. The remaining time is
shown in the time display, the Delay
start indicator light goes out and the
Start/Stop indicator light comes on.
least one second.
The Delay start indicator light goes out
and the Start/Stop indicator light
flashes.
Delay start time shown in the time
display:
^ Press the Start/Stop button again.
The program starts. The Start/Stop
indicator light comes on.
up to 59 minutes:
e.g. 30 minutes = 30
1 hour to 9 hours 30 minutes:
e.g. 5 hours = 5.00
more than 10 hours:
e.g. 15 hours = 15^
,To prevent children coming into
contact with detergent:
Fill the detergent dispenser just
before starting the program, i.e.
just before pressing the Start/Stop
button, and lock the door with the
child safety lock.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Optimize Standby
^ Press the K button to turn the
dishwasher off.
A few minutes after the last button is
pressed or a few minutes after the end
of the program the dishwasher will
switch to Standby mode to save
energy. The time display and the
indicator lights are turned off and only
the Start/Stop indicator light flashes
slowly.
^ Press and hold the Start/Stop button
and simultaneously turn the
dishwasher on using the K button.
Keep the Start/Stop button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
If it does not come on, start over.
If the dishwasher is not turned off or
opened after the program ends, after a
few minutes in Standby mode it will turn
off completely.
^ Press the Delay start button eight
times.
The Delay start indicator light shows 8
short flashes in intervals.
You can also deactivate the Optimize
Standby function. The display and the
indicator lights do not go out, and the
dishwasher turns off 6 hours after the
end of the program.
The flashing in the time display shows
whether Optimizing Standby is turned
on.
– "p 1": Optimize Standby is on.
This results in higher energy
consumption.
– "p 0": Optimize Standby is off.
^ Press the Start/Stop button if you
If Salt and/or Rinse aid or a fault is
displayed, the dishwasher will not
switch to Standby mode.
wish to change the setting.
The setting is immediately saved.
^ Press the K button to turn the
dishwasher off.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional options
Factory defaults
The flashing in the time display shows
whether a setting is different from the
default setting.
If you have changed any settings, you
can reset them to the factory defaults.
– "p 1": all values are set to the default
^ Press the K button to turn the
dishwasher off.
settings
– "p 0": at least one setting has been
^ Press and hold the Start/Stop button
and simultaneously turn the
changed.
dishwasher on using the K button.
Keep the Start/Stop button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
^ Press the Start/Stop button to reset
the dishwasher to the default
settings.
The setting is immediately saved.
If it does not come on, start over.
^ Press the K button to turn the
dishwasher off.
^ Press the Delay start button 12 times.
The Delay start indicator light shows 1
long flash and 2 short flashes in
intervals.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
Possible fault
Solution
After turning on the
The dishwasher is not
Insert the plug.
dishwasher with the K plugged in.
button, the Start/Stop
The circuit breaker has
Reset the circuit breaker.
(See data plate for the
correct fuse rating).
indicator light does not
flash.
tripped.
The dishwasher stops
during a program.
The circuit breaker has
tripped.
– Reset the circuit
breaker (see data plate
for the correct fuse
rating).
– If the circuit breaker
trips again, contact
Miele.
The program sequence There may be a technical – Press the K button to
indicators Main wash,
Drying and End all flash
simultaneously.
fault.
turn the dishwasher off.
After a few seconds:
– Turn the dishwasher
on.
The time display shows
fault FXX.
– Use the Program
button to select the
desired program.
– Press the Start/Stop
button.
If the program sequence
indicators flash again,
there is a technical fault.?
– Contact Miele.
In addition, the drain
pump may run even
Fault F70:
– Close the water tap.
– Contact Miele.
The waterproof system
when the door is open. reports a fault.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Faults in the water intake or water drain
Problem
Possible fault
Solution
The Intake/Drain
indicator light
The water supply is
closed.
Open the water supply all the
way.
alternates between
flashing and
remaining steady.
The dishwasher
stops running.
The Intake/Drain
indicator light
flashes.
Before fixing the fault:
– Press the K button to turn the
dishwasher off.
Fault F12/F13:
– Open the water supply all the
way.
Water intake fault.
The time display
shows fault FXX.
– Clean the screen in the water
supply valve (see User
maintenance instructions).
– The water pressure at the
water connection is less than
4.35 psi.
Consult a plumber.
Fault F11:
– Clean the filter combination
(see Cleaning and care).
Water drainage fault.
There might be water in
the wash cabinet.
– Clean the drain pump (see
User maintenance
instructions).
– Clean the non-return valve
(see User maintenance
instructions).
– Remove any kinks or high
loops in the drain hose.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems with the dishwasher
Problem
Possible fault
Solution
The time display is
dark.
The dishwasher has gone Press any button to come
into Standby mode to save out of Standby.
energy.
Only the Start/Stop
indicator light flashes
slowly.
There are detergent
residues in the
The dispenser was wet
when detergent was
Make sure the dispenser is
dry before adding
detergent.
dispenser at the end of added.
a program.
The detergent
Detergent residue is
Remove the detergent
residue.
dispenser flap cannot blocking the latch.
be closed properly.
The inside of the door This is normal!
and/or the interior
None.
The moisture evaporates
after some time.
walls are wet after a
program has finished.
There is water in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Press the K button to
turn the dishwasher off.
The triple filter in the wash Clean the triple filter (see
cabinet is clogged.
Cleaning and care).
The drain pump or
non-return valve is
blocked.
Clean the drain pump or
the non-return valve (see
User maintenance
instructions).
There is a kink in the drain Remove the kink.
hose.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Sounds
Problem
Possible fault
The spray arm is hitting an Interrupt the program,
item in the basket. rearrange items blocking
the spray arms.
Items are not secure in the Interrupt the program, and
Solution
There is a knocking
noise in the wash
cabinet
There is a rattling
noise in the wash
cabinet
wash cabinet.
rearrange loose pieces.
A foreign object has
become lodged in the
drain pump.
Remove the foreign object
from the drain pump (see
"Cleaning the drain pump
and non-return valve")
There is a knocking
This may be caused by
This has no effect on the
dishwasher. If in doubt,
contact a plumber.
noise in the water line the installation or the
diameter of the pipe.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Poor cleaning results
Problem
Possible fault
Solution
The dishes are not The dishes were not loaded See "Loading the
clean.
correctly.
dishwasher".
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Not enough detergent was
dispensed.
Use more detergent, or
change the detergent.
The spray arms are blocked. Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash
cabinet is clogged or not
correctly inserted.
Clean the filter and insert it
correctly.
Clean the spray arm jets, if
The spray arm jets might be required (see "Cleaning and
clogged as a result. care").
The non-return valve is stuck Clean the drain pump and
open and blocked. Wash
water will run back into the
wash cabinet.
the non-return valve (see
"Cleaning and care").
Glasses and
The rinse aid dosage is set Reduce the dosage (see
too high. "Rinse aid").
cutlery show
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Solution
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and
cutlery are
spotted.
too low, or the rinse aid
reservoir is empty.
the reservoir or switch the
rinse aid product when
refilling (see "Rinse aid").
Dishes were taken out too
soon.
Leave dishes in longer (see
"Use").
A "Tab" product was used.
Change the detergent, or
These products have a low refill the rinse aid (see "Rinse
drying effect.
aid").
White residue is
Not enough rinse aid was
Increase the dosage (see
"Setting the rinse aid
dosage").
visible on cutlery used.
and dishes.
Clouding occurs
The salt container is empty. Refill the salt container (see
"Filling the salt container").
on glassware and
cutlery; film can be
wiped off.
The salt container lid was not Reseat it making sure it
correctly screwed on.
screws back on correctly.
Unsuitable "Tab" products
were used.
Use a different detergent.
Use normal (powder or gel)
detergent.
The water softener is
programmed on too low a
setting.
Program a higher water
softener setting (see "Water
softener").
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problem
Possible fault
Detergent deposits.
Solution
Glasses have a
Change detergent right
away.
brown or blue
discoloration; film
cannot be wiped off.
Glasses are dull and Glasses are not dishwasher There is no remedy.
discolored; film
safe. The surface is
Only use dishwasher safe
glasses.
cannot be wiped off. affected.
Tea or lipstick stains The wash temperature of
Select a program with a
have not been
completely removed. too low.
The detergent has a low
the selected program was higher wash temperature.
Use a different detergent.
bleaching effect.
Plastics are
discolored.
Natural dyes e.g. from
carrots, tomatoes or
Use more detergent (see
"Detergent").
ketchup may be the cause. Discoloration is permanent.
Not enough detergent was
used to break down natural
dyes.
There are rust stains The affected items are not There is no remedy!
on cutlery.
corrosion resistant.
Use only dishwasher safe
cutlery.
No program was run after
refilling salt. Salt residuals
got in the wash cycle.
Start the "Express" program
without a load after refilling
salt.
The salt container lid was
not screwed on properly.
Reseat it making sure it
screws back on correctly.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
(USA only)
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
^ Please quote the model type and
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
52
Download from Www.Somanuals.com. All Manuals Search And Download.
User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
before
installation or use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Exterior
Check and clean your dishwasher
regularly. This will help avoid
problems and faults.
^ Only use a conditioner suitable for
your kitchen cabinetry.
^ Clean wood only with a damp cloth
and wipe dry.
,Abrasive cleaning agents,
all-purpose cleaners, thinner or
ammonia based cleaners should not
be used on the dishwasher.
Clean the exterior with a solution of
warm water and liquid soap applied
with a soft sponge. Dry with a soft
cloth.
They will damage the surface.
Wash cabinet
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Cleaner" available from your Miele
To better maintain your appliance
avoid the following:
– cleaners containing soda, ammonia,
thinners, or chlorides
Door and the door seal
^ Wipe the door seals regularly with a
– cleaners containing descaling
agents or lime removers,
damp cloth to remove food deposits.
^ Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside of
the wash cabinet and are not cleaned
by water from the spray arms.
– abrasive cleaners,
– stainless steel cleaners,
– dishwasher soap (powder),
– caustic (oven) cleaners,
– scouring pads, steel wool, hard
brushes,
Control panel
^ The plastic control panel should only
be wiped with a damp cloth or
suitable cleaning agent designed for
use on plastic.
– metal scrapers,
– steam cleaning products.
, The appliance front and controls
are not scratch proof.
Remove spills immediately.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones). During normal use, the
filter system is self-cleaning.
,The machine must not be used
without all the filters in place!
^ Check and clean the filter system
periodically for any trapped or
foreign objects.
^ Turn the handle counterclockwise to
release the triple filter system a.
The level of soiling and time it takes
before the filters need cleaning will vary
depending on your household usage.
^ Lift the filter combination out of the
machine b. Remove any solid
particles and rinse under running
water. Scrub with a nylon brush if
necessary.
^ Turn off the dishwasher before
cleaning.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
To clean the inside of the filter, the flap
must be opened.
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Push the clips together a and open
the flap b.
^ Lock the filter by turning the handle
clockwise.
^ Rinse under running water.
,The triple filter system must be
inserted and locked into place.
Large particles could get in the
circulation system and cause a
blockage.
^ Close the flap so that the clip
engages.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before
cleaning.
Removing the spray arms
^ Remove the cutlery tray (if present).
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^ Pull the lower spray arm firmly
upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
^ Remove the lower basket.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check that
they rotate freely.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher and pull the
plug.
^ Remove the triple filter (see "Triple
filter system").
^ Use a cup or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
^ Remove all foreign objects from the
drain pump (glass or bone splinters).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully reinsert the non-return valve
and secure it with the locking clamp.
,Make sure the locking clamp
clicks into place!
^ Tilt the locking clamp to the side a.
^ Pull out the non-return valve b and
rinse it under running water.
^ Remove all foreign objects from the
non-return valve.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Please refer to the Installation Diagram supplied with these instructions.
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
,Installation, repairs and other
work by unqualified persons could
be dangerous.
,Improper connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
installed by a qualified electrician.
If there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
electrician or call Miele’s
Technical Service Department:
U 1-800-999-1360
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
V 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Hardwired electrical connection
,Prior to making a hardwire
connection to the terminal, remove
the power cord. Otherwise there will
be a risk of electric shock from the
attached plug.
It is possible to hardwire this appliance
to an existing power cable.
,CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
An existing flexible supply cord or
cable shall have a minimum thickness
of AWG 14.
"tripping" the circuit breaker.
120 V, 60 Hz, 15 A fuse rating
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer cannot be held
responsible.
Black wire (live):
connect to L
White wire (neutral): connect to N
Green wire (ground): connect to -
,After attaching the permanent
power supply cord, check that all
screws on the terminal block and the
strain relief are tightened.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
GROUNDING INSTRUCTIONS
THIS APPLIANCE MUST BE
GROUNDED.
This appliance must be connected to a
grounded metal, permanent wiring
system, or an equipment-grounding
conductor must be run with the circuit
conductors and connected to the
equipment-grounding terminal or lead
on the appliance.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connection to the water
supply
– Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
– If the water pressure if lower, a
"Water Intake" notification will be
shown. See "Frequently Asked
Questions" for more information.
,Installation, repairs and other
work by unqualified persons could
be dangerous.
– If the water pressure is higher than
shown, a pressure reducing valve
must be used.
,Do not drink water from the
dishwasher!
Ensure that the water connection is
secure after the first use.
– The dishwasher can heat its own
water to the temperature required by
the wash program. This allows for
connection of the machine to either a
hot (max. 140°F / 60°C) or cold water
source.
,To prevent damage to the
dishwasher, it must only be
connected to a fully vented drainage
system.
For lowest energy consumption you
may connect the dishwasher to a
cold water source.
For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source.
,Do not cut the intake hose. If the
hose is cut, the dishwasher will not
work. There will be a water leak. If
the hose is too long, coil it neatly
and place it behind or under the
machine.
– The inlet hose is approximately 5 ft.
(1.5 m) long.
– The water inlet hose comes
equipped with an inlet hose ending
with a 3/8" female compression
fitting. This can be directly
connected to a water supply valve or
to an appropriate coupling.
If not connected directly to a water
supply valve, an appropriate
adapter (not included) is required.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Drainage
– The drain hose must not be
shortened.
– The machine comes equipped with a
built-in non-return valve on the
discharge side to prevent waste
water from flowing back into the
dishwasher.
,Make sure the hose is not kinked
or cut when pushing the machine
under the countertop.
– The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
Venting the drainage system
If the dishwasher drain hose is
connected to a floor drain or to a drain
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
– Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
(1 m).
– Use the clamp provided to attach the ^ Open the dishwasher door and
hose to the dishwashers P trap or
disposal connection (see the
"Installation Diagram").
remove the lower basket.
^ Pull the lower spray arm firmly
upwards to remove.
The hose must always be attached
on the sink side of the P trap.
When attaching the hose to a
garbage disposal fitting, make sure
the plug which is normally blocking
the fitting is knocked out or
removed.
– The hose can be angled to the left or
right side at the rear of the machine.
– The existing nipple that the drain
hose is connected to may be
^ Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
designed for various hose diameters.
If the nipple diameter is to large or to
small it should be replaced or an
adapter may be used. If the nipple
extends more than 2" (50 mm) into
the drain hose it should be
shortened, or the hose could clog.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise measurement
General requirements for measuring noise
The dishwasher must be loaded with 16 place settings and the Normal program
must be used.
Installation requirements for measuring noise
The dishwasher must be installed as follows:.
^ Install the dishwasher into an appropriate housing unit.
^ Secure the front panel.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise measurement
^ Push the insulation mat supplied (depending on model) under the plinth until it
is up against the appliance feet a.
^ Attach the toe-kick so that it is flush with the door front b.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 0313
G5220/G5225 /
M.-Nr. 09 510 211 / 01
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|