All Hazards Weather
Alert Radio
WR300
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Table of Contents
Quick Start Instructions:...................................................................................................................2
Product Information:.........................................................................................................................4
WR300 Controls:..............................................................................................................................5
Icons on the Display:........................................................................................................................5
LCD Backlighting:.............................................................................................................................5
Accessory Jacks: .............................................................................................................................5
Set the Time:....................................................................................................................................6
Set the Date:....................................................................................................................................6
Set the Alarm Time: .........................................................................................................................6
Choosing Alarm Type:......................................................................................................................6
Set the Channel: ..............................................................................................................................7
Programming Notes: ........................................................................................................................7
Getting your S.A.M.E. County Codes:..............................................................................................7
Programming County Codes:...........................................................................................................8
“ALL” County Codes:........................................................................................................................8
“Single” County Codes:....................................................................................................................8
“Multiple” County Codes:..................................................................................................................8
Reviewing Stored S.A.M.E. Codes: .................................................................................................9
Choosing an Alert Type (Voice or Siren):.........................................................................................9
To Turn the Alert ON and OFF:........................................................................................................9
Setting the Alert Volume: .................................................................................................................9
Selectable Alert Option: ...................................................................................................................9
Selectable Alert Reference Chart:..................................................................................................10
Testing the Alert:............................................................................................................................13
Reviewing Alerts: ...........................................................................................................................13
Test Signals Broadcast by NWS:...................................................................................................13
No Reception Warning:..................................................................................................................13
AM/FM Radio: ................................................................................................................................14
Turning the AM/FM Radio On:.......................................................................................................14
Changing AM/FM Stations:............................................................................................................14
AM/FM Memory Channels: ............................................................................................................14
Troubleshooting: ............................................................................................................................15
Reception:......................................................................................................................................16
About NOAA, NWS, & S.A.M.E. County Codes:............................................................................17
S.A.M.E. County Code Record: .....................................................................................................18
Specifications:................................................................................................................................19
FCC Compliance Information:........................................................................................................19
Limited Warranty:...........................................................................................................................20
Service: ..........................................................................................................................................21
Accessories:...................................................................................................................................22
Accessories Order Form: ...............................................................................................................23
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Product Information:
Thank you for choosing Midland! Your new WR300 weather radio is the latest in weather and
hazard alert monitoring technology, providing you with the information needed to keep you safe.
Your WR300 weather radio has a special receiver that tunes to the 24/7 broadcast issued by the
National Weather Service. The combined All Hazards/Weather Alert broadcast network is the
single, most immediate source for comprehensive weather and emergency information available
to the public.
This WR300 weather radio has an innovative automatic alert system. In the event of a special
warning broadcast, the radio is automatically activated along with a loud tone, a flashing LED
indicator and an “alert” message on the LCD. Emergency weather bulletins include alerts about:
tornadoes, hurricanes, floods, ice/snow storms and other severe weather. Other emergencies
might include: Amber alert, hazardous explosions, fires, chemical spills and other civil emergen-
cies.
In addition, this WR300 weather radio has the “S.A.M.E. Digital Weather/Hazard Alert” feature,
providing you with constant monitoring of your localized NWS broadcast. The S.A.M.E. decod-
ing receiver allows you to hear only messages for the area(s) concerning you. You now have a
choice as to what information will be brought to you.
We encourage you to read this owner’s manual thoroughly before operating this
radio. This manual is a valuable part of your new weather radio. See the “Quick Start
Instructions” section of this manual for the initial weather radio setup and programming.
After your new weather radio is programmed and operating properly, store the manual in a
safe place for future reference.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
WR300 Controls:
Alert
On/OFF
Weather/ Hazard
On/OFF Button
AM/FM
Button
Snooze
Button
Radio Button
Programming
Warning
Light-Red
(Arrow)
Buttons
Watch
Light-Orange
Alarm Clock
On/Off Switch
Power On/Off
and Volume
Wheel
Advisory
Light-Yellow
Menu Button
Select Button
Icons on the Display:
Alphanumeric
Message
Time Indicator
Clock Alarm
Weather
Channel
Indicator
County Code
Indicator
Alert Type
Indicator
Low Battery
indicator
LCD Backlighting:
Press and release any button to turn the backlight on for 5 seconds. For continuous backlight,
press the “MENU” button, then the press the “DOWN” arrow until “LIGHT” displays on the screen.
Then press the “SELECT” button. Then press the “UP” arrow to change the backlight setting from
“NORMAL” to “CONTINUOUS.” Press the “SELECT” button to save your settings.
Accessory Jacks:
External
Antenna
DC Jack
Connector
Programming
Cable Port
External
Alert Jack
Earphone
Jack
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Setting the AM/FM Clock Radio Functions:
Set the Time:
a. Turn on the weather radio with power/volume wheel on side of the radio.
b. Press the “MENU” button.
c. Press the “DOWN” arrow button until “SET UP TIME” is displayed.
d. Press the “SELECT” button, hour setting will begin to flash.
e. Press the “UP” button to adjust the hour setting. (Note: the AM/PM setting cannot be
manually changed; it changes automatically as you scroll through the hours).
f. Press the “RIGHT” arrow to adjust minutes and save your hour setting
g. Press the “UP” button to adjust the minute setting.
h. Press the “SELECT” button to store the time setting.
i. Press the “MENU” button to return to the main menu.
Set the Date:
a. Turn on the weather radio with power/volume wheel on side of the radio.
b. Press the “MENU” button.
c. Press the “DOWN” arrow until “SET UP DATE” is displayed.
d. Press the “SELECT” button.
e. Press the “UP” arrow to adjust the day.
f. Press the “RIGHT” arrow to select the month.
g. Press the “UP” arrow to adjust the month.
h. Press the “RIGHT” arrow to select the year.
i. Press the “UP” arrow to adjust the Year.
j. Press the “SELECT” button to store DAY/MONTH/YEAR.
k. Press the “MENU” button to return to the main menu.
Set the Alarm Time:
a. Turn on the weather radio with power/volume wheel on side of the radio.
b. Press the “MENU” button.
c. Press the “DOWN” arrow until “SET UP ALARM” is displayed.
d. Press the “SELECT” button. The alarm hour setting will begin to flash.
e. Press the “UP” arrow to adjust the alarm hour setting. (Note: the AM/ PM setting cannot be
manually changed; it changes automatically as you scroll through the hours).
f. Press the “RIGHT” arrow to choose setting alarm minutes.
g. Press the “UP” arrow to adjust the alarm minute setting.
h. Press the “SELECT” button to store the alarm settings.
Choosing Alarm Type:
a. Press the “MENU” button.
b. Use the “UP” arrow to choose radio or sound for clock alarm. (The icons are located below
the clock display).
c. Press the “SELECT” button to store the type of alarm setting.
d. To activate the alarm, set the “ALARM OFF/ON” switch to the “ON” position. The clock face
icon will appear.
e. The “SNOOZE” button on the top of the WR300 is for advancing the alarm time by 9 minutes
each time the alarm sounds. The “SNZ” icon will be displayed.
f. Turn the alarm off with the ”ALARM OFF/ON” switch on side of the radio.
g. Press the “UP” arrow to adjust the alarm minute setting.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Set the Channel:
a. Press the “MENU” button.
b. Press the “UP” (or “DOWN”) arrow until “WEATHER CHANNEL” is displayed on the LCD.
c. Press the “SELECT” button.
d. Press the “UP” arrow to manually scroll to the desired channel (Find the channel for your
frequency and channel for your area using the chart on page 2 of this Owner’s Manual).
e. Press the “SELECT” button to save this channel.
f. Press the “MENU” button to exit programming mode.
Programming Notes:
*Your WR300 can be programmed with up to 23 different S.A.M.E. codes for your county and the
surrounding counties of your choice. This ensures you receive alerts for only those counties con-
cerning you.
* Please note: Embedded in an alert message is the amount of time for which the alert is active.
The WR300 will continue to display the alert until the expiration time. Ex: END 12-55P indicates
the event ends at 12:55 PM.
Getting your S.A.M.E. County Codes:
First, determine the counties you are interested in. Then, do one of the following three steps to
get the codes:
a. The National Weather Service Toll-Free Number provides S.A.M.E. County
Codes at:1-888-NWS-S.A.M.E. (1-888-697-7263)
This is what to expect when you call the NWS number. When you call the NWS
toll-free number, automated instructions will guide you to the S.A.M.E. County
Code(s) you need. The number will be six digits long.
• You will hear “Welcome to the National Weather Service. You have reached the Specific
Area Message Encoding Program Service.”
• If you select “touch tone” to make your entries, you will be prompted to enter the name of
your state using the telephone keypad.
• Next you will be prompted to enter your county name.
• Then you will hear, “Your geographic code is XXXXXX.” (This is your S.A.M.E. County
Code.
When you pull up this URL, you will see a list of states.
• Click on your state.
• Find your county, and record the S.A.M.E. number listed next to your county.
• Click on the weather radio link at the top of the page.
• At the top of the weather radio page will be a link to the NWS list of states and
corresponding county codes. Click on this link.
• Click on your state and a list of counties and codes will be listed. Find your county and then
find your code.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Programming County Codes:
Helpful Tip: The S.A.M.E. code is created using the following method:
• The first digit is the subcounty code-currently 0 in most areas.
• The second two digits represent the state code.
• The last three digits represent the county code.
“ALL” County Codes:
Your WR300 weather radio is preprogrammed to receive NWS weather and hazard alert
transmissions for all S.A.M.E. county codes within range. If this is what you want, leave the radio
set to “ALL.” This is the default setting.
“Single” County Codes:
a. Press the “MENU” button to open menu options.
b. Press the “UP” arrow to scroll through menu options until “County Code” is displayed.
c. Press the “SELECT” button and then the “UP” arrow to scroll through ”SINGLE”, “MULTIPLE”
or “ALL.”
d. Display “SINGLE”, then press the “SELECT” button.
e. “Code 01” will be displayed. Press the “SELECT” button to program this code. The first digit
space will start blinking.
f. Use the “UP” arrow to scroll through the digits 0-9. Input the first digit then press the “RIGHT”
arrow to save that selection and move to the next digit.
g. Continue programming all 6 digits in this way. When finished, press the “SELECT” button and
your entered code will be saved.
“Multiple” County Codes:
a. Press the “MENU” button to open menu options.
b. Press the “UP” arrow to scroll through menu options until “County Code” is displayed.
c. Press the “SELECT” button and then the “UP” arrow to scroll through “SINGLE”, “MULTIPLE”
or “ALL.”
d. Display “MULTIPLE”, then press “SELECT.”
e. Use the “UP” arrow to scroll through code locations 1-23. You are able to program up to 23
different county codes into your WR300 weather radio.
f. Display the location you want then press the “SELECT” button. The first digit space will start
blinking.
g. Use the “UP” arrow to scroll through the digits 0-9. Input the first digit then press the “RIGHT”
arrow to save that selection and move to the next digit.
h. Continue programming all 6 digits in this way. When finished, press the “SELECT” button and
your entered code will be saved.
i. To program your next code, press the “UP” arrow to go to the next code location.
j. When you have entered all your desired codes, press the “MENU” button to store your
settings.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Reviewing Stored S.A.M.E. Codes:
To review your saved S.A.M.E. codes, do the following:
a. Press the “MENU” button.
b. Press the “UP” arrow until “COUNTY CODE” is displayed on the screen.
c. Press “SELECT”
d. Use the “UP” arrow to scroll through the S.A.M.E. memory code locations.
e. All empty memory locations will appear as “------”.
f. Press the “MENU” button when finished reviewing the S.A.M.E. codes.
Choosing an Alert Type (Voice or Siren):
a. Press the “MENU” button to open menu options.
b. Press the “UP” arrow until Alert Mode is displayed on the screen. Press the “SELECT” button
and “VOICE” will start blinking.
c. If you want the voice alert, press the “SELECT” button.
d. If “VOICE” is chosen, the alert would sound for 8 seconds followed by 5 minutes of weather
broadcast.
e. If you want the siren alert, press the “UP” arrow until “SIREN” is displayed, then press the
“SELECT” button to save your setting.
f. If “SIREN” is chosen, alert tones will sound for 5 minutes or until the “ALERT ON/OFF” button
is pressed.
To Turn the Alert ON and OFF:
To turn the alert on and off, press and hold the “ALERT ON/OFF” button for 5 seconds until you
see “ALERT ON” blinking. While still holding down the button, press the “UP” arrow to switch
between “ALERT ON” and “ALERT OFF.” Press the “SELECT” button to save your selection.
Setting the Alert Volume:
a. To set the alert volume, press the “MENU” button.
b. Press the “UP” arrow until “SIREN LEVEL” is displayed.
c. Press the “SELECT” button and “LEVEL HIGH” or “LEVEL LO” will start blinking.
d. Then press the “UP” arrow to choose “LEVEL HI” or “LEVEL LO” volume.
e. Press the “SELECT” button to save your setting.
Selectable Alert Option:
You can program the WR300 weather radio to only sound the voice or siren alert for certain
weather emergency messages. Those messages unimportant to you can be programmed to only
display a message, minimizing annoyance.
To program the emergency messages you want to silence, do the following:
a. To set the selectable alerts press the “MENU” button.
a. Press the “UP” button until “DEFEAT SIREN” is displayed. Press the “SELECT”button.
b. Using the “UP” arrow, scroll through the different alerts you may want to silence.
c. When you have selected one, press the “RIGHT” arrow to change the status of the event from
“ALERT ENABLE” to “ALERT DISABLE.”
d. Press the “MENU” button to save your selection and exit the programming option.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Selectable Alert Reference Chart:
Event Code
Administrative message
Level
Advisory
Default
Off
Avalanche Watch
Watch
On
Avalanche Warning
Biological Hazard Warning
Boil Water Warning
Blizzard Warning
Warning
Warning
Warning
Warning
Advisory
Warning
Warning
Watch
On
On*
On
On
Child Abduction Emergency
Civil Danger Warning
Civil Emergency Message
Coastal Flood Watch
Coastal Flood Warning
Chemical Hazard Warning
Contaminated Water Warning
Dam Watch
On
On*
On*
On
Warning
Warning
Warning
Watch
On
On*
On*
On
Dam Break Warning
Contagious Disease Warning
Practice/Demo
Warning
Warning
Advisory
Warning
Warning
Advisory
Warning
Warning
Watch
On
On
Off
Dust Storm Warning
Emergency Action Notification
Emergency Action Termination
Earthquake Warning
Immediate Evacuation
Evacuation Watch
On
On*
On*
On*
On*
On
Food Contamination Warning
Flash Flood Watch
Warning
Watch
On*
On
Flash Flood Statement
Flash Flood Warning
Flood Watch
Advisory
Warning
Watch
On
On
On
Flood Statement
Advisory
Warning
Warning
On
Flood Warning
On
Fire Warning
On
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Event Code
Flash Freeze Warning
Level
Default
On
Warning
Warning
Advisory
Warning
Watch
Freeze Warning
On
Hurricane Statement
On
Hazardous Materials Warning
Hurricane Watch
On*
On
Hurricane Warning
Warning
Watch
On*
On
High Wind Watch
High Wind Warning
Warning
Warning
Warning
Advisory
Warning
Warning
Advisory
Advisory
Advisory
Advisory
Advisory
Warning
Advisory
Warning
Advisory
Advisory
Warning
Advisory
Warning
Watch
On
Iceberg Warning
On
Industrial Fire Warning
Local Area Emergency
Law Enforcement Warning
Land Slide Warning
On*
On*
On*
On*
Off
National Audible Test
National Information Center
Network Notification Message
National Periodic Test
National Silent Test
Off
Off
Off
Off
Nuclear Power Plant Warning
Power Outage Advisory
Radiological Hazard Warning
Required Monthly Test
Required Weekly Test
Special Marine Warning
Special Weather Statement
Shelter In-Place Warning
Severe Thunderstorm Watch
Severe Thunderstorm Warning
Severe Weather Statement
Tornado Watch
On*
On
On*
Off
Off
On
On
On*
On
Warning
Advisory
Watch
On
On
On
911 Telephone Outage Emergency Advisory
Tornado Warning Warning
On
On*
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Event Code
Tropical Storm Watch
Level
Watch
Default
On
Tropical Storm Warning
Tsunami Watch
Warning
Watch
On*
On*
On*
Off
Tsunami Warning
Warning
Advisory
Advisory
Advisory
Advisory
Warning
Watch
Transmitter Backup On
Transmitter Carrier Off
Transmitter Carrier On
Transmitter Primary On
Volcano Warning
Off
Off
Off
On*
On
Wild Fire Watch
Wild Fire Warning
Warning
Watch
On*
On
Winter Storm Watch
Winter Storm Warning
Unrecognized Watch
Unrecognized Emergency
Unrecognized Statement
Unrecognized Warning
Unrecognized Message
Warning
Watch
On
On
Advisory
Advisory
Warning
Warning
On
On
On
On*
*The above event codes notated with an asterisk have a default setting to ON that cannot be
disabled. This is the intended functionality and is not an indication that the radio is not working
properly
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Testing the Alert:
To test the alert function to ensure it is working, press the “MENU” button, then press the “UP”
arrow until “SIREN TEST” is displayed. Press the “SELECT” button to sound the alert siren.
Press the “SELECT” button again to silence the alarm.
Reviewing Alerts:
The WR300 weather radio can store 10 different alerts (with overlapping effective times) in its
memory. If the radio receives a new alert while a previous alert is still in effect, it automatically
displays the new alert description. To review past alerts that are still in effect, press the “DOWN”
arrow to scroll through the last 10 alerts. If an alert is expired, it will be marked “EXP.”
Test Signals Broadcast by NWS:
All National Weather Service stations periodically transmit test signals. You can find out when
your local NWS station broadcasts test signals by calling the NOAA National Weather Service
Forecast Office (listed under “Weather” in the Federal Government section of the telephone
book).
During the weekly test signal, the local NWS station will give a list of counties covered by their
transmitter. The NWS test signal allows everyone with weather radio receivers to verify the oper-
ation of their equipment.
The following test signals may be sent by the NWS during testing: required weekly test,
required monthly test, system demo, and national periodic test.
No Reception Warning:
If no alerts are received for 10 days, the display will flash “CHECK RECEPTION” every 30 sec-
onds. If this happens, check your channel settings and county codes for setting errors. If you
receive a clear signal from the NWS, try using the “ALL” county code setting to receive all alerts
for all counties.
Note: If you have trouble finding reception, please move your radio closer to a window and away
from fluorescent lighting.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
AM/FM Radio:
There is an AM/FM radio built into the WR300 weather radio that you can listen to without inter-
rupting the weather radio functions. If an alert is received, the radio automatically switches from
the AM/FM radio to the weather radio alert.
Turning the AM/FM Radio On:
Press the “RADIO” button to turn the AM/FM radio on and off.
Changing AM/FM Stations:
Press the “RIGHT” arrow or “LEFT” arrow to scan through the radio stations. When you find a
station you like, stop pressing the arrow and the radio will stay on that station.
AM/FM Memory Channels:
You can program 3 AM and 3 FM radio stations into the radio’s memory. To program a
memory channel, do the following:
a. Turn the AM/FM radio on and use the “LEFT” or “RIGHT” arrow to tune to the desired station.
b. Press the “MENU” button. The “MEMORY” number will flash on the display.
c. Use the “UP” or “DOWN” arrow to choose the desired memory channel you wish to program.
d. Press the “SELECT” button to save your frequency selection to the chosen memory channel.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Troubleshooting:
Problem
Suggestion
Make sure the AC Power Adapter is
securely plugged into both DC jack on back
of weather radio and into the wall outlet.
Make sure batteries are installed in case
AC power fails.
No power
No sound
Check VOLUME control to ensure volume
is turned up to an audible level.
Ensure that telescoping antenna is up and
fully extended.
If you are using an external antenna,
ensure that it is connected properly.
Ensure that the radio is set to the NWS
weather channel in use in your area.
No weather broadcast when you press
WEATHER/ SNOOZE button
Contact NWS to ensure they are presently
broadcasting.
If in a metal structure, make sure you are
close to a window.
If in a weak signal area, you will need an
external antenna.
Check to see that you have programmed in
the correct S.A.M.E. County Code(s).
The radio is not responding properly to
NWS weather alert broadcasts
Check with the NWS that the tower is
broadcasting.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Reception:
The National Weather Service operates a system of weather and hazard alert broadcasts cover-
ing a large area of the United States. Currently, only a few areas are not covered. Typical broad-
casts are within reception distance of 25-50 miles of the weather station. Your WR300 weather
radio can receive broadcasts from up to 50 miles from the weather station, depending on your
location and conditions of weather, terrain, etc. If you find reception is not good in your area, try
different locations in your home or office to find a spot of improved reception. Placement near a
window usually improves reception.
If a weather broadcast cannot be heard on any of the 7 channels, contact your local NWS office
and verify the closest station is on air. Also verify the channel frequencies the station is broad-
casting. If your NWS is transmitting and you are not receiving the broadcasts, you may
need an external antenna. Please visit our website at www.midlandusa.com to view our sug-
gested antenna, the 18-259W VHF Through-Glass Antenna. This antenna improves reception
when applied to a window.
Please note: Metal structures are more difficult to receive reception in, because metal interferes
with the signal. If you live in a metal structure, you may need an external antenna.
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
About NOAA, NWS, & S.A.M.E. County Codes:
In 1994, NOAA began broadcasting coded emergency signals that identify the specific geograph-
ic area (such as the county within a state) that is affected by an emergency. Until that time, such
specific emergency weather information was not available directly to the public. NOAA trans-
mits the coded emergency signals using a technique called Specific Area Message Encoding
(S.A.M.E.) The WR300 weather radio is designed to receive these S.A.M.E. county code trans-
missions.
The National Weather service divides the United States by state and county (or parish) and
assigns a six digit code number called a FIPS (Federal Information Processing System) code,
also known as a S.A.M.E. county code.
You can program the weather radio with up to 23 S.A.M.E. county codes. The weather radio
allows you to receive broadcast alerts for all counties within your area, or for up to 23 individual
selectable counties. This will eliminate any alerts that are not within your area of interest.
When you program your S.A.M.E. county code(s) into the WR300 weather radio, you eliminate
any alerts that are not within those counties. Warnings, watches and advisories of weather and
other area emergencies, about 50 different types, will activate the weather radio for only your pro-
grammed specific area.
The S.A.M.E. message the NWS sends contains information pertaining to the period for which
the alert is valid. NWS can set the active time of the alert from 15 minutes up to 6 hours. When
the designated time has passed, the weather radio display message and light will automatically
reset to their normal appearance.
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
S.A.M.E. County Code Record:
County Name
S.A.M.E. County Code
NWS Channel
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Specifications:
Specifications are nominal and subject to change.
General
Frequency Range
(162.400, 162.425, 162.450, 162.475, 162.500, 162.525, 162.55 MHz)
Number of WX Channels
Input Voltage
7
9 – 14 Volts DC
7.0 × 5.5 × 2.25
0.5 µV
Dimensions
20 dB Quieting Sensitivity
0.5 µV
FIPS County code Sensitivity at 5kHz Dev
Channel Selectivity
±25 kHz, 60 dB
8 Ω
Speaker Impedance
Speaker Output at 10% THD
200 mW max.
FCC Compliance Information:
MIDLAND (NOAA) Weather Radio Model WR300, “S.A.M.E. Digital Weather/Hazard Alert Radio.”
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; (2) This device must accept any
interference received including interference that may cause undesired operation.
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Limited Warranty:
MIDLAND Radio Corporation will repair or replace, at its option without charge, your WR300
weather radio which fails due to a defect in material or workmanship within one year following the
initial consumer purchase.
This warranty does not include any antennas, which may be a part of or included with the war-
ranted product, or the cost of labor for removal or re-installation of the product in a vehicle or
other mounting.
Performance of any obligation under this warranty may be obtained by returning the war-
ranted product, freight prepaid, along with a copy of the original sales receipt to Midland Radio
Corporation at the address provided below.
This warranty gives you specific legal rights, and you may also have other rights, which vary,
from state to state.
Note: The above warranty applies only to merchandise purchased in the United States of
America or any of the territories or possessions thereof, or from a U.S. Military exchange. For
warranty coverage on merchandise purchased elsewhere, ask your dealer.
Midland Radio Corporation
Warranty Service Department
5900 Parretta Drive
Kansas City, Missouri 64120
Phone: (816) 241-8500
Fax: (816) 241-5713
E-mail: [email protected]
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Service:
If your MIDLAND Weather Radio fails to operate properly, check the “Troubleshooting” section in
this manual before returning it for service. If necessary, return as follows:
1. Pack the unit in its original box and packing. Then pack the original box in a suitable shipping
carton. Caution: Improper packing may result in damage during shipment.
2. Include the following:
a. Full description of any problems.
b. Money order for $7.50 to cover shipping and handling (this may not be required in some
states).
c. Daytime telephone number, name & address.
3. For warranty service include a photocopy of the bill of sale from an authorized dealer or other
proof of purchase showing the date of sale.
4. You do not need to return accessory items (AC/DC Adapter, batteries, Owners Guide) unless
they might be directly related to the problem.
5. A flat rate of $45.00 will apply to repairs not covered by warranty or units that are over one year
old. Send only cashier’s check, money order or Master Card or Visa card number.
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Accessories:
and mail to our address.
18-STR
External Alert Strobe Light
- Easy Connection
- High Strobe Visibility
- $19.99
18-259W
Window Mount All Hazard/
Weather Alert Radio Antenna
- Improves Range and Reception
- 17 – 7 Stainless Steel Rod
- $21.99
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
WR300 Owner’s Manual
Accessories Order Form:
Please send Money Order or fill in Visa/Master Card information and mail to the address below.
Please DO NOT send cash or checks. Make Money Order payable to: Midland Radio Corporation.
Name: ��������������������������������������������������������������������������
Address: ������������������������������������������������������������������������
City: ���������������������������������� State: ������Zip Code:����������������������
Tel:������������������������������ E-mail: ����������������������������������������
CC#: ������������������������������ Type:������������ Exp: �����������������������
QTY
ITEM
PRICE
Total
18-STR $19.99
18-259W $21.99
Sub Total
$���������������������
$���������������������
Tax (MO, FL, WA only)
Shipping & Handling
$�����������������
14.95
Applies to Domestic US only.
For Hawaii, Alaska, Puerto
Rico shipping and handling
will be $36.25 for 1 lb. and
$64.25 for 2 lbs. or more
$���������������������
$���������������������
Total
Mail To:
Midland Radio Corporation
Consumer Dept.
5900 Parretta Drive
Kansas City, MO 64120
Or Call (816) 241-8500
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
We’d love to hear from you! Let us know what you
think of your new Midland product at
or by visiting us at
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120
816.241.8500
Note: Features and Specifications are subject to change without notice. MIDLAND is not responsible
for unintentional errors or omissions on its packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
|