MicroBoards Technology DVD Recorder LightScribe Series User Manual

DVD Premium Pro  
LightScribe Series  
Stand-Alone, NET, and Rackmount  
Users Manual  
Version 1.07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
TABLE OF CONTENTS  
Microboards Statement Regarding Improper Duplication ............................................................... 4  
System Overview............................................................................................................................. 5  
Unpacking your system ................................................................................................................... 5  
Installation Requirements................................................................................................................ 6  
Connecting Master and Slave Towers............................................................................................. 7  
Microboards NET Configuration ...................................................................................................... 8  
Configuration Options............................................................................................................ 8  
Basic Configuration................................................................................................................ 8  
Advanced Configuration ........................................................................................................ 9  
Stand-Alone Operation .......................................................................................................... 9  
Loading media ................................................................................................................................. 9  
Main Menu..................................................................................................................................... 10  
Copy Disc to Disc .......................................................................................................................... 11  
Printing Disc to Disc ...................................................................................................................... 11  
Registering Data to the Hard Drive (HDD) .................................................................................... 11  
Copy Hard Drive (HDD) to Disc..................................................................................................... 12  
Registering Print Images to the Hard Drive (HDD)........................................................................ 12  
Printing Hard Drive (HDD) to Disc................................................................................................. 13  
Clearing the Hard Drive (HDD)...................................................................................................... 13  
Simulation Disc to Disc.................................................................................................................. 14  
Erasing RW media......................................................................................................................... 14  
Track Extraction............................................................................................................................. 15  
Error status in Track Extraction: .......................................................................................... 15  
Setup Menu ................................................................................................................................... 16  
Mode Select......................................................................................................................... 17  
DVD WR Speed................................................................................................................... 17  
CD WR Speed ..................................................................................................................... 17  
ISRC Check ......................................................................................................................... 17  
Auto Run.............................................................................................................................. 17  
Copy Quantity ...................................................................................................................... 17  
Session Mode ...................................................................................................................... 17  
Reader Select ...................................................................................................................... 17  
HDD Setup........................................................................................................................... 17  
Auto Generate............................................................................................................... 17  
Edit Name...................................................................................................................... 17  
Master Clear.................................................................................................................. 17  
HDD Format .................................................................................................................. 17  
Drive Inquiry......................................................................................................................... 17  
F/W Version ......................................................................................................................... 17  
F/W Update.......................................................................................................................... 17  
Copy and Print Logs ............................................................................................................ 17  
LightScribe Template Labeler........................................................................................................ 18  
Error Codes ................................................................................................................................... 19  
Specifications................................................................................................................................. 25  
Supported Formats........................................................................................................................ 25  
Firmware Updates ......................................................................................................................... 25  
Technical Support.......................................................................................................................... 25  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Microboards Statement Regarding Improper Duplication  
Microboards Technology fully supports the right of any business, organization, group, or  
individual to protect their property from unlicensed, unauthorized, or illegal duplication.  
As a user of our equipment, we expect you to support that right as well.  
Microboards Technology is neither responsible nor liable for the infringement of any laws  
regarding the illegal duplication of property. Microboards Technology products are in no way  
intended to encourage or condone such duplication.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
System Overview  
DVD Premium Pro LightScribe Stand-Alone and Rackmount Series  
The DVD Premium Pro LightScribe Series includes the Tower and the Rackmount styles. The  
Tower employs up to 10 General Purpose DVD-+R/DL LightScribe recorders, while the  
Rackmount employs up to 4 recorders. The hard drive comes standard with the Pro system and  
allows for DVD/CD image archival and CD track extraction for CD audio compilations.  
DVD Premium Pro LightScribe NET Series  
The DVD Premium Pro NET Series employs 10 General Purpose DVD-+R/DL LightScribe  
recorders in each tower, with the ability to have all connected drives duplicating from a single  
master. The hard drive comes standard with each tower and allows for DVD/CD image archival  
and CD track extraction for CD audio compilations.  
The LightScribe feature allows you, with the correct LightScribe CD and DVD media, to burn a  
print image to the printable side of the media. Software to create the necessary print image  
format is included.  
An intuitive, menu driven display  
and 5-button control interface  
provide one-touch operation for  
the novice user while providing  
COPY START  
(DISC to DISC)  
advanced  
features  
for  
the  
professional.  
Advanced Features:  
20-drive simultaneous burn from one master in NET mode (NET Series Only)  
Stand-Alone DVD-+R/RW/DL / CD-R duplicator  
One Touch duplication  
LightScribe Disc Printing capability  
Auto Run option  
Speed selectable (1x to 16x for DVD-+R and 4x to 48x for CD-R)  
Supports writing to DVD-+R/RW/DL, CD-R/RW  
Copy and Verify  
Hard drive comes standard for standalone DVD/CD image archival and CD track  
extraction for audio compilation CDs  
Store multiple hard drive images  
Counter feature allows the user to input how many discs need to be copied and  
the keeps track of the total discs completed.  
Automatically detects DVD or CD masters  
Simulation mode to ensure recording stability  
Easy-to-read, two-line display for status and error reporting  
Updates easily installed through DVD/CD reader  
Unpacking your system  
When unpacking your duplicator, confirm the following items are included:  
NET connection cabling with each Slave tower (NET Series Only)  
DVD Premium Pro Series duplicator  
Power cable  
LightScribe Software Installation Disc  
Starter Kit (includes Manual and Warranty information)  
If any of these items are missing, please contact or Microboards Technology Technical Support at  
952-556-1639.  
IMPORTANT: Please keep all the packing for your DVD Premium Pro LightScribe Series  
duplicator. If your unit ever needs to be sent in for service, it must be returned in the original  
packing or the warranty will be voided.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Installation Requirements  
System Setup  
Connect the power cable to the DVD Premium Pro Series tower and plug in to a  
protected power outlet strip or UPS power supply.  
NET Series Only: Connect the 2 towers using the NET cable provided (see page 7 for  
more information).  
o
The left port on the back is the IN port, and the right is the OUT port; the Master  
tower should have the NET cable plugged into the OUT port, and the Slave  
should have the cable plugged into the IN port.  
o
If more than 2 towers are being connected, connect the OUT port in the first  
Slave to the IN port of the next. In the final chain of towers, the Master wil have  
only the OUT port used, while the final tower will have only the IN port used.  
Turn on power to the tower. The system is now ready to use. If you have a NET Series  
system, you will need to configure the system before proceeding (see page 8).  
Install your DVD Premium Pro Series duplicator in the following environment:  
On a level and stable surface  
In a well ventilated location  
Temperature and humidity  
Temperature: 5-40°  
Humidity: 20-80%RH (no dew formation)  
Do not install it in the following places:  
ƒ
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked  
by a curtain or blind.)  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
A dusty location  
A place where there is a lot of vibration  
Near open flame  
A place where the temperature and humidity change drastically  
Near a heating device such as a heater or furnace  
A location where air from an air conditioner blows directly onto the unit  
Near a container filled with water  
In winter during times of low humidity or in a location where static electricity is  
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.  
Power supply  
ƒ
ƒ
Use house current as the power source for the unit.  
Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying  
machine).  
ƒ
ƒ
Use an outlet with stable power supply voltages.  
Do not overload an outlet. Do not use a service outlet from a PCs or other office  
machine.  
ƒ
ƒ
ƒ
Wire the power cord properly.  
Do not touch the power cord with a wet hand.  
Be careful not to damage the power cord.  
Inspect the power cord periodically.  
In the event that the power cord is damaged, replace the power cord.  
Be sure to use a tool such as a screwdriver to change the 115/230V Switch.  
Do not use your finger.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Connecting Master and Slave Towers  
The Microboards DVD Premium Pro NET tower line requires a physical connection between the  
towers. A tower will be designated as a Master or as a Slave tower initially based solely on the  
configuration of the connection.  
The directions below give 2 connection scenarios: a 2-tower configuration, and a Multi-Tower  
configuration. Please use the appropriate instructions based on the number of towers you have.  
The diagrams below show the backs of the towers.  
For the 2-Tower configuration, connect the OUT port of one  
tower to the IN port of the other using the provided cabling.  
Whichever tower is connected by the OUT port will become  
the Master tower. The tower that is connected by the IN  
port other will become the Slave tower.  
Once the towers are turned on and initialized, press YES  
on the Master tower to enter NET mode.  
For Stand-alone operation, press NO on both the Master  
and Slave when the configuration display is showing. Each  
tower will then operate as an independent tower.  
Master  
Tower  
Slave  
Tower  
To return to NET mode, you will need to restart both  
towers.  
.
2-Tower Configuration  
For Multi-Tower configuration (3 towers  
are shown here), select one tower as  
the Master and connect one end of one  
of the provided cables to the OUT port  
on the Master tower and the other end  
to the IN port on Slave Tower One.  
Plug the next cable to the OUT port of  
Slave Tower One and to the IN port of  
Slave Tower Two.  
If you have more than 3 towers,  
continue to connect the remaining  
towers in the same fashion. The last  
tower will only have a cable connected  
to the IN port.  
Master  
Tower  
Slave  
Tower  
One  
Slave  
Tower  
Two  
Once the Master and Slave towers  
have initialized, the displays will give  
you the configuration options.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Microboards NET Configuration  
The Microboards NET configuration allows you to connect multiple 10-drive tower duplicators.  
They can function together as a single duplicator with 10 drives per tower for ultra high-quantity  
production, or can operate independently as stand-alone duplicators, each copying from a  
different master.  
It does not matter which tower is set as the Master; the only restriction is that one tower of the  
chain must have the NET cable connected to the Out port only. The last tower in the chain will  
only use the In port.  
Configuration Options  
To set the Multi-Tower configuration, turn on power  
NET MASTER  
YES: SET MASTER  
NET MASTER  
NO: STANDALONE  
to all of the connected towers and wait for the  
configuration options to be displayed, as shown to  
the right.  
Master Display alternates  
between these messages  
The exact display message and configuration  
options on each tower will depend on the location of  
that tower in the chain.  
NET SLAVE 1  
YES: SET MASTER  
NET SLAVE 1  
NO: STANDALONE  
Once the configuration has been selected, you must  
either power cycle all towers or run the Net Reboot  
on all Master towers to change the configuration.  
First Slave Display, additional Slave  
towers show Slave number sequentially  
NET SLAVE X  
NO: STANDALONE  
The display of any Master or Stand-Alone tower will initially read COPY  
START when it is ready for duplication. The control panel on Slave towers  
Final tower in chain  
is disabled.  
Basic Configuration  
The most basic configuration would be to set the first tower as the Master with the remaining  
towers as Slaves. For this configuration, you would only need to press the YES button on the  
Master tower when the configuration options are showing.  
NET  
NET  
NET  
NET  
NET  
NET  
Master  
Slave 1  
Slave 2  
Slave 3  
Slave 4  
Slave 5  
The result with a six-tower configuration is shown above. Only the reader and hard drive on the  
NET Master will be available as source drives.  
Net Reboot and Basic Configuration  
To run the Net Reboot, press either the or button until the display reads SETUP. Press the  
YES button, then press either the or button until the display reads NET REBOOT. Press  
YES and all towers will reboot.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Advanced Configuration  
If, however, you wish to operate them as two 3-tower Master/Slave groups, simply press the YES  
button on the tower on which the Configuration Options display reads NET SLAVE 3. This will  
cause all towers following this tower to be slaved to that tower. The YES button on the first tower  
must also be pressed to slave towers 2 and 3 to the first tower. The reader and hard drive in the  
NET Master towers of both groups can be used for duplication to the connected Slave towers.  
The resulting Master/Slave configuration is shown below.  
NET  
NET  
NET  
NET  
NET  
NET  
Master  
Slave 1  
Slave 2  
Master  
Slave 1  
Slave 2  
Group A  
Group B  
This can be done in any combination of towers. However, you must set the Master/Slave  
configurations starting with the last master you want to set, following the tower chain from the end  
to the beginning.  
You do not need to disconnect any towers to change the Master/Slave configuration.  
Net Reboot and Advanced Configuration  
To run the Net Reboot, press either the or button until the display reads SETUP. Press the  
YES button, then press either the or button until the display reads NET REBOOT. Press  
YES and all towers slaved to that Master will reboot. In the example above, the Net Reboot  
would need to be run on both the Group A Master tower and the Group B Master tower for all 8  
towers to reboot.  
Stand-Alone Operation  
For all towers in the chain to operate in Stand-Alone mode, the NO button must be pressed on  
each tower to select Stand-Alone mode. The order in which this is done does not matter.  
You can combine Stand-Alone and Advanced Configurations. After start-up in the example  
above, pressing YES on NET SLAVE 4, NO on NET SLAVE 3, and YES on the NET MASTER  
tower would create 3 groups: Group A with 3 towers, Group B as a single Stand-Alone tower, and  
Group C with 2 towers.  
Net Reboot and Stand-Alone Operation  
When in Stand-Alone Operation, the Net Reboot option does not appear in the Setup menu.  
Each tower will need to be power cycled manually.  
Loading media  
To automatically eject all empty recorder drives in all connected towers, simply load your master  
disc and press the YES button when the display reads COPY START. This will eject all drives  
that have not had media loaded. When all drives are loaded and the drive LEDs turn off,  
duplication will automatically begin.  
If you do not need to burn a copy in each recorder drive, load the number of drives necessary,  
close those drives, and wait for the drive LEDs to turn off. Press the YES button, and any open  
trays will automatically close but be considered empty.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Main Menu  
The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting  
the current menu item. The NO button will move you to the next menu item. YES will select the  
current menu item.  
YES  
COPY  
15:26  
20%  
INSERT  
MASTER DISC  
INSERT  
TARGET DISC  
ANALYZING MASTER  
COPY START?  
(DISCtoDISC)  
CD-DA  
NO,  
YES  
YES  
LABEL FILE?  
INSERT  
TARGET DISC  
PRINT  
COMPLETE!  
PRINT START?  
(DISCtoDISC)  
YOURLABELNAME  
LS  
20%  
NO,▼  
MASTER SELECT?  
(DISCtoDISC)  
>READER?  
(DISCtoDISC)  
NO,▼  
>HDD1? CD-DA  
(HDDtoDISC)  
>HDD1? 15:26  
(HDDtoDISC)  
INSERT  
COPY START?  
COPY  
15:26  
20%  
TARGET DISC  
(HDD1toDISC)  
CD-DA  
NO,▼  
YES  
>HDD2?  
NO,▼  
REGIST  
CD-DA  
15:26  
20%  
INSERT  
COPY START?  
(HDD2toDISC)  
COPY  
15:26  
20%  
(DISCtoHDD/DISC)  
TARGET DISC  
CD-DA  
NO,▼  
>HDDX? CD-DA  
(HDDtoDISC)  
>HHDX? 15:26  
(HDDtoDISC)  
INSERT  
COPY START?  
(HDDXtoDISC)  
COPY  
15:26  
20%  
TARGET DISC  
CD-DA  
NO,▼  
YES  
YES  
YES  
>>HDD1 CLEAR?  
>HDD1?  
(HDDtoDISC)  
>MASTER CLEAR?  
NO,▼  
>HDDX?  
>>HDDX CLEAR?  
NO,▼  
(HDDtoDISC)  
NO,▼  
>>EXIT?  
>EXIT?  
NO,▼  
YES  
YES  
SIMULATION?  
(DISCtoDISC)  
INSERT  
INSERT  
ANALYZING MASTER  
SIMULATION 15:26  
CD-DA 20%  
MASTER DISC  
TARGET DISC  
ESC  
ESC  
NO,▼  
YES  
YES  
DISC ERASE?  
(REWRITABLE)  
SURE ?  
SURE ?  
DISC ERASE  
Please wait...  
YES  
YES  
>QUICK ERASE?  
NO,▼  
NO,▼  
>QUICK ERASE?  
DISC ERASE  
Please wait...  
NO,▼  
>EXIT?  
NO,▼  
YES  
Trk EXTRACTION?  
(DISCtoHDD1)  
EXTRACTION OK?  
YES  
ESC  
ESC  
NO,▼  
YES  
NO,▼  
SETUP?  
SETUP MENU  
(see pg 12)  
(MODE CHANGE)  
NO/ESC  
INSERT  
ANALYZING MASTER  
EXTRACT THE Trk?  
TRK 01/12  
MASTER DISC  
YES = execute the selected track  
YES,NO,,▲  
NO,,= skip track  
EXTRACT THE Trk?  
TRK 12/12  
YES,NO,,▲  
END EXTRACTION?  
NO,▼  
YES  
YES  
REGIST  
CD-DA  
15:26  
20%  
COPY TO HDD OK?  
YES  
NEXT MASTER  
NO  
NO  
COPY START  
(HDD1toDISC)  
COPY MENU  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Copy Disc to Disc  
1. Place the Master Disc into the Reader drive.  
Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on  
the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same  
media type as the master; you cannot copy a CD master to DVD’s, for instance.  
2. The display reads COPY START? (DISC to DISC).  
3. Press YES. If you have the Auto Run feature set to ON,  
the duplication will begin when the master is loaded and  
all drives are loaded with blank media.  
Copy Start?  
(DISC to DISC)  
4. The drive trays will open on any recorder without blank discs installed. If you do not want  
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and  
then press the YES button to start the copy job.  
5. The display will now show the progress of the Copy  
COPY  
DVD  
4.0GB  
25%  
Job.  
6. The Recorder(s) will eject the recordable discs when  
the job is complete.  
Printing Disc to Disc  
1. Place a disc containing your print image into the Reader drive.  
2. Place the unprinted disc(s) into the Recorder drive(s) with the print surface down and wait  
10 seconds for the light(s) on the front of the Recorder(s) to stop blinking.  
3. Press until the display reads PRINT START? (DISC  
PRINT Start?  
(DISC to DISC)  
to DISC).  
4. Press YES. If you have the Auto Run feature set to ON,  
the duplication will begin when the master is loaded and  
all drives are loaded with blank media.  
5. If you have more than one print image on the disc in the reader drive, use the button to  
scroll through the list. Press the YES button when the image you want is displayed.  
6. The drive trays will open on any recorder without discs loaded. If you do not want to print  
to those drives, close the tray(s), wait for the drive light to go out, and then press the YES  
button to start the print job.  
PRINT  
LS  
7. The display will now show the progress of the Print Job.  
8. The Recorder(s) will eject the printed discs when the job  
is complete.  
25%  
Registering Data to the Hard Drive (HDD)  
1. At the COPY START? (DISC to DISC) menu, press  
the NO or button until the display shows MASTER  
SELECT? (DISC TO DISC)  
MASTER SELECT?  
(DISC to DISC)  
2. Place the Master disc into the Reader drive.  
3. Press the YES button.  
4. The display will show:  
READER?  
(DISC to DISC)  
5. Press the NO or button  
6. The display will now show:  
DISC to HDD?  
The number in the lower right corner of the display  
indicates the amount of free space remaining on the  
hard drive.  
150GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
7. You will see this screen after the contents of the master  
have been analyzed:  
LIGHTSCRIBE?  
DATA?  
YES  
NO  
Press the NO button to register your master as a disc  
image.  
8. Next, name the disc image:  
If you do not have the Auto Generate in the Setup menu  
feature turned on, use the or buttons to change the  
character in the position shown by the cursor. Press the  
NAME?  
(_  
4.2GB  
)
YES button to move the cursor to the right or NO to move back to the left. Once the  
cursor is on the 14th character, press YES to begin registering the master.  
9. The display will now show the progress of the data being  
transferred to the hard drive:  
REGISTER  
DVD  
4.2GB  
25%  
10. Once the Master disc has been copied to the HDD, the  
Reader drive will eject the disc. When you go back into the MASTER SELECT? Menu,  
and select a partition with data stored on it, the display will show the type of data (ROM  
or Video) and the capacity of that data. Proceed to COPY HDD TO DVD section.  
Copy Hard Drive (HDD) to Disc  
1. Follow the instructions on page 11 to register the Master  
to the HDD.  
MASTER SELECT?  
(DISC)  
2. Press to NO or button until the screen displays:  
3. Press the YES button.  
4. The display will show READER.  
5. Press the NO or button and the display will show HDD1. If this is the hard drive  
partition you wish to copy, press the YES button.  
6. The screen will display COPY START? (HDD1 to DISC)  
COPY START?  
7. If you wish to select a different hard drive partition, press  
(HDD1 to DISC)  
the NO or button in step 5, unit the display shows the  
partition you wish to copy.  
8. Place the blank disc(s) into the Recorder(s) and wait 10 seconds for the light(s) on the  
front of the Recorder(s) to stop blinking.  
9. The drive trays will open on any recorder without blank discs installed. If you do not want  
to make a copy in those drives, press the YES button to start the copy job.  
10. The display will now show the progress of the copy job  
COPY  
DVD  
4.0GB  
25%  
from the HDD to the Recorder(s):  
11. After the Copy job is complete, the disc(s) will be ejected  
from the Recorder(s).  
Registering Print Images to the Hard Drive (HDD)  
NOTE: Each print image will occupy 1GB of hard drive space regardless of actual image size.  
For assistance with creating print images, please refer the LightScribe Template  
Labeler section of this manual or to the Help menu within application.  
1. At the COPY START? (DISC to DISC) menu, press the  
MASTER SELECT?  
(DISC to DISC)  
NO or button until the display shows MASTER  
SELECT? (DISC TO DISC).  
2. Place the Master disc into the Reader drive.  
3. Press the YES button.  
4. The display will show READER? (DISC to DISC).  
5. Press the NO or button.  
READER?  
(DISC to DISC)  
6. The display will now show:  
The number in the lower right corner of the display  
indicates the amount of free space remaining on the  
hard drive.  
DISC to HDD?  
150GB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
7. You will see this screen after the contents of the master  
have been analyzed:  
LIGHTSCRIBE?  
DATA?  
YES  
NO  
Press the YES button to add a LightScribe print image.  
8. You can have up to 20 print images on your disc. Use the or buttons to select the  
image you want and press YES. You can only select 1 image at a time.  
9. The display will now show the progress of the print  
REGISTER  
LS  
image being transferred to the hard drive:  
10. Once the Master image has been copied to the HDD,  
the Reader drive will eject the disc. When you go back  
25%  
into the MASTER SELECT? Menu, and select a partition with a print image stored on it,  
the display will read LS in the upper right corner and show the name of that image.  
Proceed to PRINTING HDD TO DVD section.  
Printing Hard Drive (HDD) to Disc  
1. Follow the instructions on page 12 to register the Print  
Image to the HDD.  
2. Press to NO or button until the screen displays:  
3. Press the YES button.  
MASTER SELECT?  
(DISC)  
4. The display will show READER.  
5. Press the NO or button and the display will show HDD1. If this is the image you wish  
to print, press the YES button. ALL LIGHTSCRIBE PRINT IMAGES SAVED TO THE  
HARD DRIVE WILL SHOW LS IN THE UPPER RIGHT CORNER OF THE DISPLAY.  
6. The screen will display:  
7. If you wish to select a different image, press the NO or  
PRINT START?  
YOURLABELNAME  
button in step 5, unit the display shows the print  
image you wish to print.  
8. Place the unprinted disc(s) into the Recorder(s) and wait 10 seconds for the light(s) on  
the front of the Recorder(s) to stop blinking.  
9. Press the YES button. If you have the Auto Run feature set to ON, the printing will begin  
when all drives are loaded with unprinted media.  
10. The drive trays will open on any recorder without discs installed. If you do not want to  
print using those drives, close the tray(s), wait for the drive light to go out, and then press  
the YES button to start the copy job.  
11. The display will now show the progress of the print  
PRINT  
LS  
job from the HDD to the Recorder(s):  
12. After the Print job is complete, the disc(s) will be  
ejected from the Recorder(s).  
25%  
Clearing the Hard Drive (HDD)  
The Master Clear option will not appear if there is no information stored on any of the hard drive  
partitions.  
1. At the COPY START? (HDD1 to DISC) menu, press the NO or button until the display  
shows MASTER SELECT? (HDD1 to DISC).  
2. Press the YES button.  
3. The display will show READER? (DISC to DISC).  
4. Press the NO or button until you the screen  
displays MASTER CLEAR? (HDD):  
MASTER CLEAR?  
(HDD)  
5. Press the YES button.  
6. You can now select which hard drive partition to erase. Pressing the NO or button will  
scroll you though the partition selections.  
7. Press the YES button if you are sure you want to clear the HDD.  
8. The hard drive will now be cleared and you will be  
>HDD1?  
asked if you want to register another master to the  
HDD.  
(DISC to HDD)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
9. Press YES and the Reader drive will eject and you can insert another master to register  
to the HDD.  
10. Press NO and to exit this menu without registering data to the hard drive partition.  
Simulation Disc to Disc  
Important: Simulation is not allowed when using DVD+R/RW media.  
1. At the COPY START? (DISC to DISC) menu, press  
the NO or button until the display shows  
SIMULATION? (DISC to DISC).  
SIMULATION??  
(DISC to DISC)  
2. Place the Master Disc into the Reader drive.  
3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on  
the front of the Recorder(s) to stop blinking.  
4. Press YES.  
5. The drive trays will open on any recorder without blank discs installed. If you do not want  
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and  
then press the YES button to start the copy job.  
6. The display will now show the progress of the  
SIMULATION  
DVD  
4.0GB  
25%  
Simulation Copy Job.  
7. The Recorder(s) will eject the DVD-R discs when the  
job is complete.  
Note: DVD-R media will NOT be recorded to in Simulation Mode.  
Erasing RW media  
DISC ERASE?  
(REWRITABLE)  
1. At the COPY START? (DISC to DISC) menu, press  
the NO or button until the display shows DISC  
ERASE? (REWRITABLE):  
2. Load the Recorder(s) with the CD-RW or DVD-+RW media you wish to erase. You can  
erase one disc at a time or fill all the Recorders to erase multiple discs at once. All discs  
loaded must be of the same type.  
3. Press the YES button  
4. The next screen asks if you want to perform a Quick Erase.  
QUICK ERASE?  
If you wish to perform a Full Erase, press the NO button.  
FULL ERASE?  
Pressing the YES button at either of these selections will show the following screen:  
SURE?  
5. Press the YES button if you are sure you want to erase the DVD-+RW disc. If you do not  
wish to erase the disc, press the NO button and you will go back to the DISC ERASE  
screen (step 1).  
6. The screen will now show:  
7. Once the erasing is complete, the Recorder(s) will  
eject the disc(s).  
DISC ERASE  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Track Extraction  
When extracting tracks to the internal hard drive, the DVD Premium Pro Series will use the next  
available partition space on the hard drive. Like any time a master is registered to the hard drive,  
you have the ability to name the partition.  
Trk EXTRACTION?  
1. At the COPY START? Menu, press the NO or button  
(CDtoHDD)  
until the display reads:  
Press the YES button.  
EXTRACTION OK?  
2. Press YES again in the following screen.  
3. Once the analysis of the master completes, you will  
need to name the disc image.  
NAME?  
(_  
79:28  
If you do not have the Auto Generate in the Setup menu  
feature turned on, use the or buttons to change the  
character in the position shown by the cursor. Press the  
)
YES button to move the cursor to the right or NO to move back to the left. Once the  
cursor is on the 14th character, press YES to begin registering the master. Insert a  
master audio disc into the reader drive. The duplicator will analyze the master disc.  
4. Next, it displays Selected Track Number / Total Track Number.  
This master data has total 12 tracks.  
Press NO or to skip forward a track.  
Press YES to select the track you want to  
extract.  
EXTRACT THE Trk?  
TRK 01/12  
5. If you skip forward all tracks, it asks if you want to end extraction for the master data.  
Press YES to finish extraction and register selected  
END EXTRACTION?  
tracks in HDD.  
Press NO or to add more tracks from this master  
data.  
6. If you press YES in step 5, the display asks you to register  
the extracted tracks in HDD.  
COPY TO HDD OK?  
NEXT MASTER?  
Press YES to start registration.  
7. After registration completes, decide if you want to extract  
more tracks from other master audio discs.  
Press YES to extract more tracks from other master audio  
discs.  
Press NO to complete extraction.  
8. If you press NO, the changes back to the COPY menu so that you can copy the extracted  
tracks in HDD to blank CD-R media.  
Error status in Track Extraction:  
In the following situation in TRACK EXTRACTION, the display shows an error status on the LCD.  
1. If you try to extract a track which is not CD-DA, the  
EXTRACT THE Trk?  
track number does not display properly, showing “—“.  
--/12  
Pressing the YES button will not add the track.  
2. If the total time of extracted audio tracks is over 80  
EXTRACT THE Trk?  
06/12  
minutes or 99 tracks have already been selected, the  
display will read OVER. Pressing the YES button will  
not add the track.  
OVER  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Setup Menu  
Yes  
Yes  
Yes  
Yes  
SETUP  
MODE SELECT?  
(COPY MODE)  
COPY?  
(DISC to DISC)  
VERIFY?  
(DISC to DISC)  
COPY + V?  
(DISC to DISC)  
EXIT?  
COPY?  
DVD WR  
SPEED?  
(MAX)  
MAX?  
MAX?  
12X?  
40X?  
1X?  
4X?  
EXIT?  
MAX?  
CD WR SPEED?  
(MAX)  
EXIT?  
MAX?  
ISRC CHECK?  
(OFF)  
ISRC ON?  
ON?  
ISRC OFF?  
OFF?  
EXIT?  
ISRC ON?  
Yes  
Yes  
Auto Run?  
(OFF)  
Yes  
Yes  
COPY QUANTITY?  
(xxxx/xxxx)  
COPY QUANTITY?  
0---  
SESSION MODE?  
(AUTO)  
AUTO?  
CLOSE?  
OPEN?  
EXIT?  
AUTO?  
Yes  
READER SELECT?  
(DRIVExx)  
DRIVE01  
READER  
THE DISPLAY WILL CYCLE  
THROUGH THE MAKE, MODEL,  
AND FIRMWARE OF THE  
SELECTED DRIVE UNTIL YOU  
PRESS A BUTTON.  
DRIVE02  
RECORDER  
DRIVExx  
RECORDER  
DRIVE01  
READER  
EXIT?  
Yes  
DRIVE INQUIRY?  
HDD  
HDD  
THE DISPLAY WILL CYCLE  
THROUGH THE MAKE, MODEL,  
AND FIRMWARE OF THE  
SELECTED DRIVE UNTIL YOU  
PRESS A BUTTON.  
DRIVE01  
READER  
DRIVExx  
RECORDER  
EXIT?  
HDD  
HDD  
F/W VERSION  
F/W UPDATE  
Premium Pro 1020  
VER A.BC  
H/W INFO  
12ΦπρΨ  
EXIT?  
Premium Pro 1020  
VER A.BC  
Yes  
Yes  
INSERT  
Checking  
UPDATE?  
Updating  
Complete  
PROGRAM DISC  
VER a.bc -> b.cd  
Yes  
NET REBOOT?  
REBOOTS MASTER  
(with NET option only)  
AND SLAVE TOWERS  
KEY  
Yes  
Caption indicates button to press  
No caption indicates display sequence  
(Back), NO, or (Forward)  
COPY LOG?  
PRINT LOG?  
EXIT?  
Yes  
Yes  
OK xxxxxxx  
NG xxxxxxx  
OK xxxxxxx  
NG xxxxxxx  
YES (Accept) or ESC (Return to Menu)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Setup Menu  
1. At the COPY START? (DISC to DISC) menu, press the NO or button until the display  
shows SETUP? (MODE CHANGE). Press the YES button.  
2. Pressing the NO or button will allow you to move from menu to menu.  
3. Pressing the YES button will allow you to view or change the configuration of the system.  
4. Please follow the flow chart on page 16 to navigate through the different menus.  
Here is a description of each setup menu item:  
Mode Select  
COPY - Duplication from master disc to blank disc, or HDD to blank disc if master data is saved.  
VERIFY - It compares a copied disc with the master disc.  
COPY+V - Copying in the COPY+VERIFY mode  
DVD WR Speed  
Available speeds range from 16x down to 1x.  
CD WR Speed  
Available speeds range from 48x down to 4x.  
ISRC Check  
Default setting is ON. This feature will copy the ISRC codes from the Master audio disc to the  
blank discs.  
Auto Run  
Default setting is OFF. When set to ON, this allows the duplicator to start the duplication process  
when all recorders are loaded with blank media. If you are copying Disc-to-Disc, the master must  
be loaded before duplication will begin.  
>>COPY QUANTITY  
Copy Quantity  
Set up the number of disc you want to copy.  
0750  
Use the ▼▲buttons to change the number in the current column up or down. YES will move you  
one column to the right, NO will move you 1 column to the left. Press YES when in the right  
column to save the number of copies entered. The example above shows that 750 copies have  
been entered with the cursor currently in the right column (underlined).  
Session Mode (CD only. Invalid for DVD)  
Select either from AUTO, CLOSE, or OPEN.  
AUTO: Make the session of copied disc as same as the master.  
CLOSE: Close the session of copied disc.  
OPEN: Leave the session of copied disc open.  
Reader Select  
Changes which drive is selected as the reader. This setting should not be changed.  
HDD Setup  
Access to the Hard Drive maintenance functions.  
Auto Generate  
This option will create Hard Drive partition names for you automatically if ON is selected.  
When OFF is selected, the user will need to name each partition added.  
Edit Name  
This option will allow you to modify partition image names (See pages 11-12).  
Master Clear  
This option will allow you to remove specific hard drive partition images.  
HDD Format  
This option will completely erase all hard drive partition images.  
Drive Inquiry  
Displays an inquiry of each drive connected, showing drive model and firmware.  
F/W Version  
Shows DVD Premium Pro LightScribe Series firmware version and H/W information.  
F/W Update  
Used when updating the firmware of the DVD Premium Pro LightScribe Series duplicator.  
Copy and Print Logs  
Displays the number of successful and unsuccessful burned and printed discs over the entire life  
of the duplicator.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
LightScribe Template Labeler  
The LightScribe Template Labeler and LightScribe System Software included with the DSR  
Premium Pro LightScribe Series duplicator are required for creating the necessary print image  
files for the LightScribe Print feature to work.  
Do not update or attempt to use any version of the LightScribe Template Labeler or the  
LightScribe System other than those provided by Microboards Technology.  
To successfully create print image files that can be used with the DSR Premium Pro  
LightScribe Series duplicator, launch the LightScribe Template Labeler application  
using the LightScribe shortcut on your desktop.  
The first step is to select the template you wish to  
use for the print image. The number of images you  
would like to add to the print image, the amount of  
text you need to include, and the background image  
will all determine which template to select.  
Click Next when you have chosen your template.  
Additional template packages are available for  
After choosing your template, add images or text to  
the design. For more information on this process,  
please review the Help menu in the application.  
When you are done with this step, click the Preview  
and Print button.  
In the Preview window, select Microboards  
LightScribe Disc Publisher as the Drive.  
Select the Contrast Level. Options are Best,  
Normal, and Draft. By default, Best is selected.  
Select the Disc Color. This will only change the  
color of the displayed preview, and will have no  
impact on the printed disc. The base color of the  
disc will not be changed during printing.  
Finally, click the Print button and provide the name  
of the print image file and location to which you  
would like to save the file.  
Once the print image file is created, burn the print image to a disc for use in the DSR Premium  
Pro LightScribe Series duplicator.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Error Codes  
Read Errors  
ASC  
00  
ASCQ  
00  
Description  
NO ADDITIONAL SENSE INFORMATION  
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED  
AUDIO PLAY OPERATION IN PROGRESS  
AUDIO PLAY OPERATION PAUSE  
00  
00  
00  
06  
11  
12  
00  
00  
00  
00  
01  
13  
14  
15  
17  
AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED  
AUDIO PLAY OPERATION STOPPED DUE TO ERROR  
NO CURRENT AUDIO STATUS TO RETURN  
CLEANINF REQUESTED  
00  
NO INDEX/SECTOR SIGNAL  
02  
04  
04  
04  
04  
04  
05  
06  
08  
08  
08  
08  
09  
09  
09  
09  
0A  
0B  
0B  
0B  
10  
11  
11  
11  
11  
11  
11  
12  
13  
14  
14  
14  
15  
15  
15  
17  
17  
17  
17  
17  
00  
00  
01  
02  
03  
07  
00  
00  
00  
01  
02  
03  
00  
01  
02  
03  
00  
00  
01  
02  
00  
01  
02  
05  
06  
0F  
10  
00  
00  
01  
05  
06  
00  
01  
02  
00  
01  
02  
03  
04  
NO SEEK COMPLETE  
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE  
LOGICAL UNIT IS IN PROCESS OF BECOMING READY  
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUESTED  
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED  
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS  
LOGICAL UNIT DOES NOT RESPOND TO SELECTION  
NO REFERENCE POSITION FOUND (medium may be upside down)  
LOGICAL UNIT COMMUNICATION FAILURE  
LOGICAL UNIT COMUUNICATION TIME-OUT  
LOGICAL UNIT COMMUNICATION PARITY ERROR  
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)  
TRACK FOLLOWING ERROR  
TRACKING SERVO FAILURE  
FOCUS SERVO FAILURE  
SPINDLE SERVO FAILURE  
ERROR LOG OVERFLOW  
WARNING  
WARNING-SPECIFIED TEMPERATURE EXCEEDED  
WARNING-ENCLOSURE DEGRADED  
ID CRC OR ECC ERROR  
UNRECOVERED READ ERROR  
ERROR TOO LONG TO CORRECT  
L-EC UNCORRECTABLE ERROR  
CIRC UNRECOVERED ERROR  
ERROR READING UPC/EAN NUMBER  
ERROR – LOSS PF STREAMING  
ADDRESS MARK NOT FOUND FOR ID FIELD  
ADDRESS MARK NOT FOUND FOR DATA FIELD  
RECORD NOT FOUND  
RECORD NOT FOUND – RECOMMEND REASSIGNMENT  
RECORD NOT FOUND – DATA AUTO – REALLOCATED  
RANDOM POSITIONING ERROR  
MECHANICAL POSITIONING ERROR  
POSITIONING ERROR DETECTED BY READ OF MEDIUM  
RECOVERED DATA WITH NO EEOR CORRECTION APPLIED  
RECOVERED DATA WITH RETRIES  
RECOVERED DATA WITH POSITIVE HEAD OFFSET  
RECOVERED DATA WITH NEGATIVE HEAD OFFSET  
RECOVERED DATA WITH RETIES AND/OR CIRC APPLIED  
17  
05  
RECOVERED DATA USING PREVIOUS SECTOR ID  
RECOVERED DATA WITH ERROR CORRECTION APPLIED  
RECOVERED DATA WITH ERROR CORP. & RETRIES APPLIED  
RECOVERED DATA WITH CIRC  
RECOVERED DATA WITH L-EC  
PARAMETER LIST LENGTH ERROR  
18  
18  
18  
18  
1A  
1B  
00  
01  
03  
04  
00  
00  
SYNCHRONOUS DATA TRANSFER ERROR  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
1E  
20  
21  
24  
25  
26  
26  
26  
26  
26  
28  
29  
29  
29  
29  
29  
2A  
2A  
2A  
2A  
2B  
2C  
2C  
2F  
30  
30  
30  
30  
35  
35  
35  
35  
35  
39  
3A  
3A  
3A  
3B  
3B  
3B  
3B  
3B  
3B  
3B  
3D  
3E  
3E  
3E  
3F  
3F  
3F  
3F  
40  
43  
44  
45  
46  
47  
48  
49  
4A  
4B  
00  
00  
00  
00  
00  
00  
01  
02  
03  
04  
00  
00  
01  
02  
03  
04  
00  
01  
02  
03  
00  
00  
05  
00  
00  
01  
02  
03  
00  
01  
02  
03  
04  
00  
00  
01  
02  
0F  
11  
12  
13  
14  
15  
16  
00  
00  
01  
02  
00  
01  
02  
03  
NN  
00  
00  
00  
00  
00  
00  
00  
00  
00  
RECOVERED ID WITH ECC CORRECTION  
INVALID COMMAND OPERATION CODE  
LOGICAL BLOCK ADDRESS OUT OF RANGE  
INVALID FIELD IN CDB  
LOGICAL UNIT NOT SUPPORTED  
INVALID FIELD IN PARAMETER LIST  
PARAMETER NOT SUPPORTED  
PARAMETER VALUE INVALID  
THRESHOLD PARAMETERS NOT SUPPORTED  
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION  
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED  
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED  
POWER ON OCCURRED  
SCSI BUS RESET OCCURRED  
BUS DEVICE RESET FUNCTION OCCURRED  
DEVICE INTERNAL RESET  
PARAMETERS CHANGED  
MODE PARAMETERS CHANGED  
LOG PARAMETERS CHANGED  
RESERVATIONS PREEMPTED  
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT  
COMMAND SEQUENCE ERROR  
PERSISTENT PREVENT CONFLICT  
COMMANDS CLEARED BY ANOTHER INITIATOR  
INCOMPATIBLE MEDIUM INSTALLED  
CANNOT READ MEDIUM - UNKNOWN FORMAT  
CANNOT READ MEDIUM – INCOMPATIBLE FORMAT  
CLEASNING CARTRIDGE INSTALLED  
ENCLOSURE SERVICES FAILURE  
UNSUPPORTED ENCLOSURE FUNCTION  
ENCLOSURE SERVICES UNAVAILABLE  
ENCLOSURE SERVICES TRANSFER FAILURE  
ENCLOSURE SERVICES TRANSFER REFUSED  
SAVING PARAMETERS NOT SUPPORTED  
MEDIUM NOT PRESENT  
MEDIUM NOT PRESENT-TRAY CLOSED  
MEDIUM NOT PRESENT-TRAY OPEN  
END OF MEDIUM REACHED  
MEDIUM MAGAZINE NOT ACCESSIBLE  
MEDIUM MAGAZINE REMOVED  
MEDIUM MAGAZINE INSERTED  
MEDIUM MAGAZINE LOCKED  
MEDIUM MAGAZINE UNLOCKED  
MECHANICAL POSITIONING OR CHANGER ERROR  
INVALID BITS IN IDENTIFY MESSAGE  
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET  
LOGICAL UNIT FAILURE  
TIMEOUT ON LOGICAL UNIT  
TARGET OPERATING CONDITIONS HAVE CHANGED  
MICROCODE HAS BEEN CHANGED  
CHANGED OPERATING DEFINITION  
INQUIRY DATA HAS CHANGED  
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)  
MESSAGE ERROR  
INTERNAL TARGET FAILURE  
SELECT OR RESELECT FAILURE  
UNSUCCESSFUL SOFT RESET  
SCSI PARITY ERROR  
INITIATOR DETECTED ERROR MESSAGE RECEIVED  
INVALID MESSAGE ERROR  
COMMAND PHASE ERROR  
DATA PHASE ERROR  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
4C  
4D  
4E  
53  
53  
55  
00  
NN  
00  
00  
02  
00  
00  
00  
01  
00  
01  
02  
03  
00  
01  
FF  
00  
01  
02  
03  
04  
00  
01  
00  
00  
00  
xx  
LOGICAL UNIT FAILED SELF-CONFIGURATION  
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)  
OVAERLAPPED COMMANDS ATTEMPTED  
MEDIA LOAD OR EJECTED FAILED  
MEDIUM REMOVAL PREVENTED  
SYSTEM RESOURCE FAILURE  
UNABLE TO RECOVER TABLE-OF-CONTENTS  
OPERATOR REQUEST OR STATE CHANGE INPUT  
OPERATOR MEDIUM REMOVAL REQUEST  
LOG EXCEPTION  
THRESHOLD CONDITION MET  
LOG COUNTER AT MAXIMUM  
57  
5A  
5A  
5B  
5B  
5B  
5B  
5D  
5D  
5D  
5E  
5E  
5E  
5E  
5E  
63  
LOG LIST CODES EXHAUSTED  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Logical Unit Failure  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure  
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)  
LOW POWER CONDITION ON  
IDLE CONDITION ACTIVATED BY TIMER  
STANDBY CONDITION ACTIVATED BY COMMAND  
IDLE CONDITION ACTIVATED BY COMMAND  
STANDBY CONDITION ACTIVATED BY COMMAND  
END OF USER AREA ENCOUNTERED ON THIS TRACK  
PACKET DOES NOT FIT IN AVAILABLE SPACE  
ILLEGAL MODE FOR THIS TRACK  
63  
64  
65  
73  
VOLTAGE FAULT  
CD CONTROL ERROR  
VENDOR SPECIFIC  
80  
Write Errors  
ASC  
00  
00  
00  
00  
00  
00  
00  
02  
04  
04  
04  
04  
04  
04  
04  
05  
06  
08  
08  
08  
08  
09  
09  
09  
09  
0A  
0B  
0B  
0B  
0C  
ASCQ  
00  
06  
11  
12  
13  
14  
15  
00  
00  
01  
02  
03  
04  
07  
08  
00  
00  
00  
01  
02  
03  
00  
01  
02  
03  
00  
00  
01  
02  
00  
Description  
NO ADDITIONAL SENSE INFORMATION  
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED  
AUDIO PLAY OPERATION IN PROGRESS  
AUDIO PLAY OPERATION PAUSED  
AUDIO PLAY OPERATION SUCCESSFULLY  
AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR  
NO CURRENT AUDIO STATUS TO RETURN  
NO SEEK COMPLETE  
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE  
LOGICAL UNIT IS IN PROCESS OF BECOMING READY  
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED  
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED  
LOGICAL UNIT NOT READY, FORMAT IN PROGRESS  
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS  
LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS  
LOGICAL UNIT DOES NOT RESPOND TO SELECTION  
NO REFERENCE POSITION FOUND  
LOGICAL UNIT COMMUNICATION FAILURE  
LOGICAL UNIT COMUUNICATION TIME-OUT  
LOGICAL UNIT COMMUNICATION PARITY ERROR  
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)  
TRACK FOLLOWING ERROR  
TRACKING SERVO FAILURE  
FOCUS SERVO FAILURE  
SPINDLE SERVO FAILURE  
ERROR LOG OVERFLOW  
WARNING  
WARNING-SPECIFIED TEMPERATURE EXCEEDED  
WARNING-ENCLOSURE DEGRADED  
WRITE ERROR  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
0C  
0C  
0C  
0C  
0C  
0C  
11  
11  
15  
15  
15  
16  
16  
16  
16  
16  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
18  
18  
18  
18  
18  
18  
18  
18  
19  
19  
19  
19  
1A  
1B  
1C  
1C  
1C  
1D  
20  
21  
21  
24  
25  
26  
26  
26  
26  
26  
27  
27  
27  
27  
27  
27  
27  
28  
02  
03  
07  
08  
09  
0A  
00  
06  
00  
01  
02  
00  
01  
02  
03  
04  
00  
01  
02  
03  
04  
05  
06  
07  
08  
09  
00  
01  
02  
03  
04  
05  
06  
07  
00  
01  
02  
03  
00  
00  
00  
01  
02  
00  
00  
00  
02  
00  
00  
00  
01  
02  
03  
04  
00  
01  
02  
03  
04  
05  
06  
00  
WRITE ERROR-RECOVERED WITH AUTO REALLOCATION  
WRITE ERROR-RECOMMEND REASSIGNMENT  
WRITE ERROR-RECOVERY NEEDED  
WRITE ERROR-RECOVERY FAILED  
WRITE ERROR-LOSS OF STREAMING  
WRITE ERROR-PADDING BLOCKS ADDED  
UNRECOVERED READ ERROR  
CIRC UNRECOVERED ERROR  
RANDOM POSITIONING ERROR  
MECHANICAL POSITIONING ERROR  
POSITIONING ERROR DETECTED BY READ OF MEDIUM  
DATA SYNCHRONIZATION MARK ERROR  
DATA SYNC ERROR-DATA REWRITTEN  
DATA SYNC ERROR-RECOMMEND REWRITE  
DATA SYNC ERROR-DATA ATUO-REALLOCATED  
DATA SYNC ERROR-RECOMMEND REASSIGNMENT  
RECOVERED DATA WITH NO ERROR CORRECTION APPLIED  
RECOVERED DATA WITH RETRIES  
RECOVERED DATA WITH POSITIVE HEAD OFFSET  
RECOVERED DATA WITH NEGATIVE HEAD OFFSET  
RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED  
RECOVERED DATA USING PREVIOUS SECTOR ID  
RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED  
RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT  
RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE  
RECOVERED DATA WITHOUT ECC - DATA REWRITTEN  
RECOVERED DATA WITH ERROR CORRECTION APPLIED  
RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED  
RECOVERED DATA - DATA AUTO-REALLOCATED  
RECOVERED DATA WITH CIRC  
RECOVERED DATA WITH L-EC  
RECOVERED DATA - RECOMMEND REASSIGNMENT  
RECOVERED DATA - RECOMMEND REWRITE  
RECOVERED DATA WITH ECC - DATA REWRITTEN  
DEFECT LIST NOT ERROR  
DEFECT LIST NOT AVAILABLE  
DEFECT LIST ERROR IN PRIMARY LIST  
DEFECT LIST ERROR IN GROWN LIST  
PARAMETER LIST LENGTH ERROR  
SYNCHRONOUS DATA TRANSFER ERROR  
DEFECT LIST NOT FOUND  
PRIMARY DEFECT LIST NOT FOUND  
GROWN DEFECT LIST NOT FOUND  
MISCOMPARE DURING VERIFY OPERATION  
INVALID COMMAND OPERATION CODE  
LOGICAL BLOCK ADDRESS OUT OF RANGE  
INVALID ADDRESS FOR WRITE  
INVALID FIELD IN CDB  
LOGICAL UNIT NOT SUPPORTED  
INVALID FIELD IN PARAMETER LIST  
PARAMETER NOT SUPPORTED  
PARAMETER VALUE INVALID  
THRESHOLD PARAMETERS NOT SUPPORTED  
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION  
WRITE PROTECTED  
HARDWARE WRITE PROTECTED  
LOGICAL UNIT SOFTWARE WRITE PROTECTED  
ASSOCIATED WRITE PROTECT  
PERSISTENT WRITE PROTECT  
PERSISTENT WRITE PROTECT  
CONDITIONAL WRITE PROTECT  
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
29  
29  
29  
29  
29  
2A  
2A  
2A  
2A  
2B  
2C  
28  
29  
2A  
2A  
2C  
2C  
2C  
2C  
2E  
2F  
30  
30  
30  
30  
30  
30  
30  
31  
31  
32  
32  
35  
35  
35  
35  
35  
37  
39  
3A  
3A  
3A  
3D  
3E  
3E  
3E  
3F  
3F  
3F  
3F  
40  
43  
44  
45  
46  
47  
48  
49  
4A  
4B  
4C  
4D  
00  
01  
02  
03  
04  
00  
01  
02  
03  
00  
00  
00  
00  
00  
01  
00  
03  
04  
05  
00  
00  
00  
01  
02  
05  
06  
08  
09  
00  
01  
00  
01  
00  
01  
02  
03  
04  
00  
00  
00  
01  
02  
00  
00  
01  
02  
00  
01  
02  
03  
NN  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
NN  
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED  
POWER ON OCCURRED  
SCSI BUS RESET OCCURRED  
BUS DEVICE RESET FUNCTION OCCURRED  
DEVICE INTERNAL RESET  
PARAMETERS CHANGED  
MODE PARAMETERS CHANGED  
LOG PARAMETERS CHANGED  
RESERVATIONS PREEMPTED  
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT  
COMMAND SEQUENCE ERROR  
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED  
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED  
PARAMETERS CHANGED  
MODE PARAMETERS CHANGED  
COMMAND SEQUENCE ERROR  
CURRENT PROGRAM AREA IS NOT EMPTY  
CURRENT PROGRAM AREA IS EMPTY  
PERSISTENT PREVENT CONFLICT  
INSUFFICIENT TIME FOR OPERATION  
COMMANDS CLEARED BY ANOTHER INITIATOR  
INCOMPATIBLE MEDIUM INSTALLED  
CANNOT READ MEDIUM - UNKNOWN FORMAT  
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT  
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT  
CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM  
CANNOT WRITE - APPLICATION CODE MISMATCH  
CURRENT SESSION NOT FIXATED FOR APPEND  
MEDIUM FORMAT CORRUPTED  
FORMAT COMMAND FAILED  
NO DEFECT SPARE LOCATION AVAILABLE  
DEFECT LIST UPDATE FAILURE  
ENCLOSURE SERVICES FAILURE  
UNSUPPORTED ENCLOSURE FUNCTION  
ENCLOSURE SERVICES UNAVAILABLE  
ENCLOSURE SERVICES TRANSFER FAILURE  
ENCLOSURE SERVICES TRANSFER REFUSED  
ROUNDED PARAMETER  
SAVING PARAMETERS NOT SUPPORTED  
MEDIUM NOT PRESENT  
MEDIUM NOT PRESENT - TRAY CLOSED  
MEDIUM NOT PRESENT - TRAY OPEN  
INVALID BITS IN IDENTIFY MESSAGE  
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET  
LOGICAL UNIT FAILURE  
TIMEOUT ON LOGICAL UNIT  
TARGET OPERATING CONDITIONS HAVE CHANGED  
MICROCODE HAS BEEN CHANGED  
CHANGED OPERATING DEFINITION  
INQUIRY DATA HAS CHANGED  
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)  
MESSAGE ERROR  
INTERNAL TARGET FAILURE  
SELECT OR RESELECT FAILURE  
UNSUCCESSFUL SOFT RESET  
SCSI PARITY ERROR  
INITIATOR DETECTED ERROR MESSAGE RECEIVED  
INVALID MESSAGE ERROR  
COMMAND PHASE ERROR  
DATA PHASE ERROR  
LOGICAL UNIT FAILED SELF-CONFIGURATION  
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
4E  
51  
51  
53  
53  
55  
57  
5A  
5A  
5A  
5A  
5B  
5B  
5B  
5B  
5D  
5D  
5D  
5D  
5E  
5E  
5E  
5E  
5E  
63  
64  
64  
65  
72  
72  
72  
72  
72  
72  
73  
73  
73  
73  
73  
73  
73  
B6  
B9  
80  
00  
00  
01  
00  
02  
00  
00  
00  
01  
02  
03  
00  
01  
02  
03  
00  
01  
03  
FF  
00  
01  
02  
03  
04  
00  
00  
01  
00  
00  
01  
02  
03  
04  
05  
00  
01  
02  
03  
04  
05  
06  
00  
00  
FF  
OVAERLAPPED COMMANDS ATTEMPTED  
ERASE FAILURE  
ERASE FAILURE - Incomplete erase operation detected  
MEDIA LOAD OR EJECT FAILED  
MEDIUM REMOVAL PREVENTED  
SYSTEM RESOURCE FAILURE  
UNABLE TO RECOVER TABLE-OF-CONTENTS  
OPERATOR REQUEST OR STATE CHANGE INPUT  
OPERATOR MEDIUM REMOVAL REQUEST  
OPERATOR SELECTED WRITE PROTECT  
OPERATOR SELECTED WRITE PERMIT  
LOG EXCEPTION  
THRESHOLD CONDITION MET  
LOG COUNTER AT MAXIMUM  
LOG LIST CODES EXHAUSTED  
FAILURE PREDICTION THRESHOLD EXCEEDED -  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Spare Area Exhaustion  
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)  
LOW POWER CONDITION ON  
IDLE CONDITION ACTIVATED BY TIMER  
STANDBY CONDITION ACTIVATED BY COMMAND  
IDLE CONDITION ACTIVATED BY COMMAND  
STANDBY CONDITION ACTIVATED BY COMMAND  
END OF USER AREA ENCOUNTERED ON THIS TRACK  
ILLEGAL MODE FOR THIS TRACK  
INVALID PACKET SIZE  
VOLTAGE FAULT  
SESSION FIXATION ERROR  
SESSION FIXATION ERROR WRITING LEAD-IN  
SESSION FIXATION ERROR WRITING LEAD-OUT  
SESSION FIXATION ERROR - INCOMPATIBLE TRACK IN SESSION  
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK  
NO MORE RZONE RESERVATIONS ARE ALLOWED  
CD CONTROL ERROR  
POWER CALIBRATIOIN AREA ALMOST FULL  
POWER CALIBRATION AREA IS FULL  
POWER CALIBRATION AREA ERROR  
PROGRAM MEMORY AREA UPDATE FAILURE  
PROGRAM MEMORY AREA/RMA IS FULL  
PROGRAM MEMORY AREA/RMA IS (almost) FULL  
MEDIA LOAD/EJECT MECHANISM FAILED  
PLAY OPERATION ABORTED  
VENDOR SPECIFIC  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Specifications  
DVD Recorder Drive: DVD-+R/RW/DL CD-R/RW Recorder  
Power Source:  
Weight:  
115V/230V 50-60Hz switchable power supply  
58 pounds  
Dimensions:  
Power supply:  
Environment:  
7.48” (W) x 16.75” (D) x 24.5” (H)  
400W  
Temperature: 40°C (104°F) / 5°C (41°F)  
Humidity: 20% - 80%  
Supported Formats  
CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2),  
Photo CD, CD-DA (Audio CD), CD-Extra, CD-R, CD-RW  
DVD-ROM, DVD-+R/RW/DL, DVD-VIDEO  
700MB  
CD  
Recording format  
DVD  
CD  
Recording capacity (nominal)  
Applicable media  
4.7GB for General DVD  
8.3GB for Dual Layer  
DVD  
CD  
CD-R, CD-RW  
DVD  
DVD-+R, DVD-+RW, DVD-+R DL  
Firmware Updates  
Occasionally it may be necessary to load updated firmware on to the DVD Premium Pro Series  
duplicator. Only those firmware versions recommended and provided by Microboards Technical  
Support for this specific product should be installed. Installation of an incorrect firmware on any  
Microboards Technology product may result in any remaining warranty being voided.  
Technical Support  
For technical questions or support issues, contact Microboards Technology technical support:  
United States  
PH: 952-556-1639  
FAX: 952-556-1628  
Europe  
PH: +44 (0) 845 230 7800  
Japan  
PH: 03-3561-2266  
Please have the Model and Serial Number of your duplicator available when contacting Technical  
Support.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Premium Pro LightScribe Series  
MICROBOARDS TECHNOLOGY, LLC  
Tower Models (Stand-Alone and NET Series)  
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s  
authority to operate this equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and antenna  
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European  
standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive  
93/68/EEC.  
Canadian Department of Communications (DOC) Statement  
This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a  
la norme NMB-003 du Canade.  
Rackmount Models  
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s  
authority to operate this equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instruction manual, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be  
required to correct the interference at his own expense.  
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following  
European standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking  
Directive 93/68/EEC.  
Canadian Department of Communications (DOC) Statement  
This Class A digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe A est conforme a  
la norme NMB-003 du Canade.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LG Electronics Computer Monitor W2286L User Manual
LG Electronics CRT Television W1943T User Manual
LOREX Technology Home Security System QLR1660 User Manual
Makita Marine Instruments PE3450H User Manual
Makita Power Screwdriver BFL201R User Manual
Maytag Refrigerator 3013912910 User Manual
Maytag Washer 461970255072 User Manual
MB QUART Car Speaker RSC 216 User Manual
Melissa Espresso Maker 651 004 User Manual
Meridian America Speaker DSP8000 User Manual