Optional Wall/Tabletop Stand (PN 46-00885)
MS9590 STAND INSTALLATION GUIDE
To fix mount the stand to the wall:
1. Drill two #39 pilot holes in the wall spaced 39 mm (1.54") apart on a
horizontal centerline.
Flex Stand Components (PN 46-00709)
2. Install one #8 wood screw in each of the pilot holes, leaving a space
between the head of the screw and the wall surface.
3. Locate the two slots marked as "A" on the stand base in Figure 5.
4. Match the "A" slots on the stand to the heads of the installed wood
screws.
5. Slide the stand over the screw heads and down to lock the stand in place.
Item
Item Description
Qty.
A
B
C
D
E
F
G
H
J
Cradle Coupler
Cradle
1
1
1
2
1
2
2
1
1
1
1
Flexible Shaft
Screw Cap
Stand Base
¼" - 20 x ⅜" Flat Head Phillips Screw, 100° Undercut
#8 Round Head Wood Screw (for fixed mount applications)
M3 -.5 x 20 mm, Pan Head Phillips Screw
M3 Flat Washer
Figure 5.
Figure 6.
Cradle Angle Warning
K
L
M3 Split Lock Washer
Flexible Shaft Cover
Figure 1. Stand Components
November 2007
Printed in the USA
Copyright 2007, Metrologic Instruments, Inc.
0 0 - 0 5 2 4 9 B
- 4 -
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|