INSTALLATION INSTRUCTIONS FOR PART 99-7604
APPLICATIONS
IN2F0I0N3I-T2I00G435
99-7604/99-7604B/
99-7604T
KIT FEATURES
• DIN Radio Provision
• ISO Mount Radio Provision
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• Painted To Match Factory Dash
99-7604= SILVER
99-7604B= BLACK
99-7604T=TAN
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Pocket • E) Double DIN Brackets
• F) Double DIN Trim Plate • G) Top Radio Housing Bracket • H) (2) #8 X 3/8” Phillip Screws
• I) Climate Control Cable
C
F
B
A
H
E
I
G
D
TOOLS REQUIRED:
Hook Tool • Panel Removal Tool • (2) Small Flat Blade Screwdrivers
• Phillips Screwdriver • Socket set
1-800-221-0932
© COPYRIGHT 2008 METRA ELECTRONICS CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 DASH DISASSEMBLY
INFINITI G35 2003-2004
1
2
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
A
1
2
Unclip the collar below the shift knob
and slide down. Using a small screw-
driver or hook tool remove the spring
clip to release and remove the shift
knob. (Figure A)
3
Unclip the cup holder/shifter trim
panel. Unplug and remove panel.
(Figure B)
B
C
D
4
5
Remove (2) Phillips screws from the
bottom of the radio/climate control
panel. (Figure C)
Remove (2) Phillips screws from the
panel below the steering column then
unclip and let the panel hang.
6
7
Remove (2) Phillips screws from the
accessory plug panel then unclip and
remove the panel. (Figure D)
Unclip and remove the passenger side
kick panel then remove (1) Phillips
screw exposed behind the panel on
bottom right side of glove box.
(Figure E)
Continue on page 2 .
E
1
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 DASH DISASSEMBLY
INFINITI G35 2003-2004
8
9
Open glove box and remove (4)
Phillips screws from the top edge of
box opening. (Figure F)
F
Unclip and remove the black cover
panel below glove box and remove (1)
Phillips screw from bottom of glove
box exposed on left side next to
accessory plug panel.
10 Remove (2) Phillips screws from the
accessory plug panel then unclip and
remove the panel. (Figure G)
G
11 Unclip and remove the trim panel sur-
rounding the clock and display on top
of the dash. (Figure H)
12 Remove (2) Phillips screws securing
the clock and clock bracket. Unplug
and remove clock and bracket.
(Figure I)
H
13 Remove (1) Phillips screw at the top
of the radio/climate control panel.
(Figure J)
Continue on page 3.
J
I
2
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 DASH DISASSEMBLY
INFINITI G35 2003-2004
K
14 Unsnap radio/climate control panel
including climate control vents at the
top left and right and pocket assem-
bly. Unplug and remove panel.
(Figure K)
Remove (2) Phillips screws securing
the pocket to the radio/climate con-
trol panel and remove pocket. (Retain
pocket for use during kit assembly.)
16
17 Use (2) small flat blade screwdrivers
to gently pry the vents from radio/cli-
mate control panel to remove. (Retain
vents for use during kit assembly.)
15 Remove (6) Phillips screws securing
the radio chassis to the factory panel
and remove radio chassis to access
the factory pocket.
18 Unclip and remove the thin plastic
trim at the top edge of the radio/cli-
mate control panel.
Continue to kit preparation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 KIT PREPARATION
KIT PREPARATION
*Note: Refer also to the instructions included with the aftermarket radio.
A
Attach the vents into the radio housing
in the same location as the factory
panel. (Figure A)
1
2
Secure the factory pocket removed in
step 16 of the dash disassembly into
the radio housing using the factory
hardware. (Figure B)
3
Attach the top radio housing bracket to
the radio housing using the (2) #8 X
3/8” Phillips screws provided with this
kit. (Figure C)
B
4
5
Clip the thin plastic trim removed in
step18 (of page 3) to the top edge of
the radio housing.
Connect the black end of the climate
control cable to the climate controls in
the radio housing and connect the
other end of the cable to the factory
climate control harness during final
assembly.
Continue to kit assembly.
C
4
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 KIT ASSEMBLY
DIN RADIO PROVISION WITH POCKET
*Note: Refer also to the instructions included with the aftermarket radio.
A
Slide the DIN cage into the Radio
1
Housing and secure by bending the
metal locking tabs outward. (Figure A)
2
3
Slide the aftermarket radio into the
cage until it snaps into place. (Figure B)
Snap the pocket into the radio housing.
(Figure C)
Continue to final assembly.
B
C
5
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 KIT ASSEMBLY
ISO MOUNT RADIO PROVISION WITH POCKET
*Note: Refer also to the instructions included with the aftermarket radio.
A
Mount the ISO Brackets to the radio
with the screws supplied with the
radio. (Figure A)
1
2
3
4
Slide the radio into the radio housing
until it snaps into place. (Figure B)
Snap the ISO trim plate onto the front
of the Radio Housing. (Figure B)
Snap the pocket into the radio housing.
(Figure C)
B
Continue to final assembly.
C
6
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 KIT ASSEMBLY
DOUBLE DIN RADIO PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
A
1
2
Cut and remove the center bar from
the radio housing. (Figure A)
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3
4
Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly using
the screws supplied with the radio.
(Figure C)
B
Snap the Double DIN trim plate into the
radio housing. (Figure C)
Continue to final assembly.
C
7
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 KIT ASSEMBLY
STACKED ISO UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
A
1
2
Cut and remove the center bar from
the radio housing. (Figure A)
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3
4
Slide the stacked ISO units into the
bracket/radio housing assembly and
secure the units to the kit using the
screws supplied with the units.
(Figure C)
B
Snap the Double DIN trim plate into the
radio housing. (Figure C)
Continue to final assembly.
C
8
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 FINAL ASSEMBLY
FINAL ASSEMBLY
A
B
(A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
C
D
Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter and making connections as shown. (Isolate and individ-
ually tape off the ends of any unused wires to prevent electrical short circuit.)
1
2
3
Re-connect the negative battery terminal and test the unit for proper operation.
Reassemble radio and dash assemblies in reverse order of disassembly.
FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the instructions included with the
head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and
individually tape off ends of any unused wires to prevent electrical short circuit.
METRA / EIA WIRING CODE
12V Ignition / Acc. . . . . . . . . . Red
Right Front (+) . . . . . . . . . . . . Gray
12V Batt / Memory. . . . . . . . . Yellow
Ground. . . . . . . . . . . . . . . . . . Black*
Power Antenna. . . . . . . . . . . . Blue
Right Front (-). . . . . . . . . . . . . Gray/ Black
Left Front (+) . . . . . . . . . . . . . White
Left Front (-). . . . . . . . . . . . . . White / Black
Right Rear (+) . . . . . . . . . . . . Violet
Amp Turn-On . . . . . . . . . . . . . Blue / White
Amp Ground. . . . . . . . . . . . . . Black / White
Illumination . . . . . . . . . . . . . . Orange
Dimmer . . . . . . . . . . . . . . . . . Orange / White
Right Rear (-) . . . . . . . . . . . . . Violet / Black
Left Rear (+) . . . . . . . . . . . . . Green
Left Rear (-) . . . . . . . . . . . . . . Green / Black
*NOTE: When a Black wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’s specifications.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7604 INSTRUCTIONS
1-800-221-0932
REV. 08/04/08 © COPYRIGHT 2008 METRA ELECTRONICS CORPORATION INST99-7604
Download from Www.Somanuals.com. All Manuals Search And Download.
|