MX4501
User’s Guide
Home Audio System with
5-CD Player and AM/FM
Stereo Radio
Before operating this product,
Download from Www.Somanuals.com. All Manuals Search And Download.
please read these instructions completely.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion-and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing
damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
50
60
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SERVICE SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
15. OVERLOADING
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes and requirements for grounding electrodes.
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
ANTENNA
LEAD IN
WIRE
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
GROUND
CLAMP
Do not use this product near water–for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in a wet basement; or near a
swimming pool.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket or table
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
recommended by the manufacturer or sold with the
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
PORTABLE CART WARNING
(symbol provided by RETAC)
NEC - NATIONAL ELECTRICAL CODE
product. Any mounting of the product should follow the
S2898A
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force and uneven
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation, to ensure reliable operation of the product and
to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should never
be placed near or over a radiator or heat source. This product should
not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment of other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance–this
indicates a need for service.
13. LIGHTNING
23. HEAT
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
SPEAKER CONNECTION
1. Place the speakers in convenient locations on either side of the unit. Usually a
distance of five to eight feet between speakers provides the best stereo effect,
but this may vary depending on the size and acoustics of the room.
2. Locate the Speaker Jacks on the rear of the unit and connect the red wires to
the red (+) terminals and connect the black wires to the black (-) terminals.
3. To connect the speakers, press and hold the terminal down, insert the speaker
wire and release.
4. Pull lightly on the connection to make sure it is secure.
CAUTION: Only connect the speakers which are supplied with the unit. The use of any other or additional
speakers may cause damage to the unit. Never operate the unit without the speakers connected.
BATTERY OPERATION FOR THE REMOTE CONTROL
The battery compartment is located on the rear of the remote control.
+
• Remove the battery compartment door by pressing down on the tab and lifting the battery
compartment off.
• Insert two (2) AAA size batteries into the battery compartment as shown to the right. Be
+
sure to observe the polarity markings which are engraved inside the battery
compartment. If the batteries are inserted incorrectly, the remote control will not operate.
• Replace the battery compartment door.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified (alkaline are recommended).
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or rechargeable) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
AC CONNECTION
Unwind the AC cord and extend it to its full length. Insert the end of the AC
cord into any convenient 120V 60Hz household outlet.
AC Outlet
Please note that this unit is equipped with a polarized AC plug which has one
blade wider than the other. This is a safety feature to reduce the likelihood of
electric shock. This polarized AC plug will only fit in a polarized AC outlet. If
AC Plug
you find that you cannot insert this plug into your outlet, you may have an
obsolete non-polarized outlet. Please do not try to defeat this safety feature by using a non-polarized
adapter or by filing the wider blade to make it fit into your outlet. If this plug does not fit into your outlet, you
should contact a qualified licensed electrician to replace your obsolete outlet.
IMPORTANT NOTES:
•
•
Before moving or lifting the unit, make sure the power plug is disconnected from the power source.
Do not move or lift the unit during playing/loading of a CD as this may cause malfunction to the CD
mechanism.
•
If there is a power failure or the AC cord is disconnected, when the AC cord is connected again, the clock
will be reset ("12:00" will appear in the display) and you will need to set the clock again.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE (CONTINUED)
CONNECTING AN EXTERNAL UNIT
R
L
To
Aux In
EXTERNAL AUDIO SOURCE
From
Aux
Out
NOTES:
• Connecting the unit to an external audio source will allow you to broadcast the external unit’s sound through
this unit’s speakers.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is off and both units are unplugged before making any
connections.
To hear the unit connected to the Aux In jacks, turn both units on, then press the
FUNCTION button until the AUX indicator appears in the display.
REMOTE SENSOR
To operate the unit with the remote control, point the remote at the remote sensor on the front of the main
unit and press the appropriate button. The remote control has an effective operating range of approximately
15 feet and an angle of no more than 30°.
NOTE: Bright sunlight may interfere with the operation of the remote control.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT
1
2 3 4 5
6 7
8
9
10
11 12
13
14
15 1617 18 19
20
1. DISC SELECT 1-5 Buttons/Disc
Indicators
10. Headphone Jack
11. MEM-UP Button
2. POWER Button
3. PROGRAM//MEMORY/ CLOCK SET
Button
4. FUNCTION Button
5. CD MODE Button
6. REPEAT ALL DISC Indicator
7. Display
12. PLAY/PAUSE (®p) Button
13. STOP (I) Button
14. SKIP/TUNING o Button
15. SKIP/TUNING n Button
16. CD Tray
17. BASS BOOST Indicator
18. BASS BOOST Button
19. Open/Close Button
20. Remote Sensor
8. BAND Button
9. VOLUME Control
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS (CONTINUED)
REAR
1
2
3
4
1. AUX In Jacks
2. FM Wire Antenna
3. Speaker Jacks
4. AC Cord
R
L
REMOTE
1. FUNCTION Button
2. OPEN/CLOSE Button
3. PLAY/PAUSE (®p) Button
4. SKIP/TUNING o Button
5. STOP (I) Button
6. VOLUME Down Button
7. PROGRAM/MEMORY/CLOCK
SET Button
11
12
1
2
3
4
5
13
8. CD MODE Button
9. DISC 1-5 Buttons
10. MEM-DOWN Button
11. POWER Button
14
15
6
7
8
12. BASS BOOST Button
13. SKIP/TUNING n Button
14. Volume Up Button
15. BAND Button
9
16
17
10
16. REPEAT ALL DISC Button
17. MEM-UP Button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
SETTING THE CLOCK
1
2
3
1
2
While the unit is at the standby
mode (the clock appears in the
display and the backlight is dimly
lit), press and hold the
PROGRAM/MEMORY/CLOCK
SET button; "24" or "12" will blink
in the display.
Press the PROGRAM/MEMORY/
CLOCK SET button and the hours
will blink.
Press the SKIP/TUNING o 1 or
n 2 button to set the unit to the
24 hour (24H) mode (also known
as military time), or 12 hour (12H)
mode.
4
5
3
3
1
2
Press the SKIP/TUNING o 1 or
n 2 button to set the current hour
(making sure to also set the
correct AM/PM setting if in 12H
Press the SKIP/TUNING o 1 or
n 2 button to set the current
minute. Press the PROGRAM/
MEMORY/CLOCK SET button 3
and the time will be set.
mode),
then
press
the
PROGRAM/MEMORY/CLOCK
SET button 3 again; the minute
digits will blink.
BASS BOOST
HEADPHONE JACK
BACKLIGHT
1
1
While the unit is on Standby
mode, the backlight will light
dimly. While the unit is on, the
backlight will light brightly.
To enhance the overall bass
sound, press the BASS BOOST
button; the BASS BOOST
indicator will light. Press again for
normal bass sound; the BASS
BOOST indicator will go out.
To listen to the unit through
headphones, simply insert the
headphones (not included) into
the Headphone jack. The
speakers will be disconnected
when the headphones are
plugged in.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
LISTENING TO THE RADIO
1
2
3
Press the POWER button to turn Press the FUNCTION button Press the BAND button on the
the unit on; the display will light repeatedly until the tuner is main unit or at the remote to
brightly.
selected; "AM" or "FM" and the select AM or FM.
frequency will appear in the
display.
4
5
6
2
1
1
1
2
2
MANUAL TUNING: Repeatedly
AUTOMATIC TUNING: Press
Adjust the BASS BOOST button
1 and VOLUME control 2 as
desired.
press the SKIP/TUNING o 1 or n and hold the SKIP/TUNING o 1
2 button to manually advance the or n 2 button until the frequency
frequency in the display up or
down until the desired frequency
appears.
in the display starts to scan, and
then release the button; the tuner
will search and then stop on the
next strong station it finds. Repeat
this step until the desired
For FM , "ST" (Stereo indicator)
will appear if the station is
broadcasting in stereo.
frequency appears in the display.
Hints for Better Reception
AM–The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so that
the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the
position that provides the strongest reception for each of your favorite AM stations.
FM–Make sure that the FM Wire Antenna is extended to its full length. You may have to vary the direction of
the antenna to find the strongest signal for each FM station.
NOTE:
When you turn the unit off and then back on again, the volume setting will return to the default setting level.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
1
2
3
1
2
1
2
Press the POWER button to turn
the unit on; the display will light
brightly.
Press the FUNCTION button 1 Press the SKIP/TUNING o 1 or
repeatedly until the tuner is
selected; "AM or "FM" indicator
will appear in the display.
n 2 button to select a station.
Press the BAND button 2 on the
main unit to select AM or FM.
4
5
6
1
2
3
5
Press the PROGRAM/MEMORY/ Press the PROGRAM/MEMORY/ Repeat steps 3 through 5 to
CLOCK SET button again to set program up to 10 stations in each
the station in the selected band, if desired.
memory.
CLOCK SET button 1; the preset
number will appear and MEM will
blink in the display. Press the
MEM-UP button 2 (or MEM-
DOWN on the remote) until the
desired memory number appears
on the display.
RECALLING RADIO PRESETS (10 EACH BAND)
1
2
3
2
1
2
1
Follow steps 1 and 2 above.
Press the MEM-UP button (or Adjust the BASS BOOST button
MEM-DOWN button on remote) to
select a preset; the station will
automatically be tuned in.
1 and VOLUME control 2 as
desired.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
PLAYING COMPACT DISCS
This unit can play standard, single or CD-R CDs.
1
2
3
Press the POWER button to turn Press the FUNCTION button
the unit on; the display will light repeatedly until CD is selected;
Press the STOP button to stop the
playback, then press the Open/Close
button and insert a CD onto the top
spindle.
brightly.
one of the disc indicator will blink
and the other disc indicators will
light. Then the unit will start
playback the discs automatically
(If there are discs in the trays).
NOTE: If a CD is already playing, that
CD spindle will not eject, it will remain
in the unit. To eject all the CD spindles,
press the STOP (I) button before
pressing the Open/Close button.
4
5
6
Push Back &
Pull Out Areas
Press a Disc button (1 through 5)
to select a disc and it will
automatically start playing.
To insert more CDs, insert a disc Press the Open/Close button to
in the top spindle, then slightly close the CD tray. The first disc
push the Push Back & Pull Out will automatically start playing.
area to push back the top spindle
NOTE: The respective disc
indicator will light when a disc is
inserted, blink when the disc is
playing. If there is no disc on the
selected spindle, that Disc
indicator will turn off and the unit
will skip to playback the next disc.
to the unit. Then, insert another
CD. Repeat this step for up to five
CDs.
7
8
2
1
Adjust the BASS BOOST button
‚ and VOLUME control 2 as
desired. Playback will continue
until all the tracks on all the discs
have played.
To stop playback before the discs
end, press the STOP (I) button.
The disc will stop and the display
will show the total number of
tracks on the selected disc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
CD PAUSE CONTROL
1
2
During CD playback, if you wish
to pause the disc momentarily,
press the PLAY/PAUSE (®p)
button. Playback stops but the
disc continues to spin and the
Play indicator will blink.
Press the PLAY/PAUSE (®p)
button again to release pause and
resume normal CD playback.
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (
/
)
1
2
3
During playback, depress and
hold either the SKIP/TUNING n
or o button to move the player
forward or backward within a
track to locate a specific musical
passage. The player will move
forward or backward at high
speed as long as the button is
depressed. When you release the
SKIP/TUNING n or o button,
normal playback will resume.
During playback, press the During playback, press the
SKIP/TUNING n button once to SKIP/TUNING o button once to
advance the player to the move the player back to the
beginning of the next track. Press beginning of the current track.
the SKIP/TUNING n button Press the SKIP/TUNING o button
repeatedly to advance the player repeatedly to move the player
to higher-numbered tracks.
back to lower-numbered tracks.
NOTE: You can only using the SKIP/TUNING n or o button to skip through the tracks on the selected CD
playing back. If you want to skip to playback the tracks on the other discs, use the Disc select button (1
through 5) to select the desired disc first, then using the SKIP/TUNING n or o button to select the desired
track.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
REPEAT PLAYBACK ONE TRACK OR ALL TRACKS ON A SELECTED DISC
1
2
3
1
2
2
2
4
3
To repeat a single track, select a To repeat all of the tracks on a To cancel Repeat Playback,
Disc by pressing one of the Disc disc continuously, select a Disc by
press the CD MODE button 1
until “RPT” and “RND” disappear
from the display or press the
STOP (I) button 2 to stop the
repeat playback."
(1 through 5) buttons ‚; playback pressing one of the Disc (1
through 5) buttons ‚; playback
will start automatically. Press the
will start automatically. Press the
CD MODE button 2 once; “RPT”
CD MODE button 2 twice; “RPT”
will blink in the display. Press the
will light solid in the display. All
tracks on the selected CD will
repeat playback continuously.
SKIP/TUNING n 3 or o 4 button
to select the specific track that you
wish to repeat. The specific track
you selected will be repeated
continuously.
REPEAT ALL DISC PLAYBACK
1
2
3
2
1
To repeat ALL discs, press the All of the discs will repeat until the To cancel Repeat Playback,
STOP (I) button is pressed.
press the REPEAT ALL DISC
button again; the REPEAT ALL
DISC indicator will turn off.
REPEAT ALL DISC button 1 on
the remote control; the REPEAT
ALL DISC indicator will light.
Press the PLAY/PAUSE (®p)
button 2 to begin the repeat all
function.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
RANDOM PLAYBACK
1
2
3
3
2
To play the tracks on the desired Press the PLAY/PAUSE button to To cancel random playback,
CD in a random order. Press a start random playback of the press the CD MODE button until
selected disc. The CD player will "RPT" and "RND" disappear from
play back all the tracks of the the display.
selected disc randomly, then it will
skip to playback the tracks on
next disc in Normal sequence
order. Playback will continue until
all the tracks on all the discs have
played.
Disc Select button (1 through 5)
1 to select the desired disc, then
press the STOP (I) button 2 to
stop the playback. Press the CD
MODE button 3 three times;
“RND” will appear in the display.
NOTE: The Random feature will randomly play the selected disc, not all of the inserted discs.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
IMPORTANT: You can only program tracks on the selected disc, not all of the inserted discs.
To perform programmed playback, proceed as follows:
1
2
2
1
With the unit on, press the
FUNCTION button repeatedly
until CD is selected; one of the
Disc indicator will blink and the
other disc indicators will light.
Press the STOP (I) button 1 to
stop automatic playback. Press
the
PROGRAM/MEMORY/
CLOCK SET button 2; “P-01”
(program number) will appear
briefly, then “MEM” and “01”
(track number) will blink in the
display.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS (CONTINUED)
4
5
6
3
3
3
1
1
1
2
2
2
Press the SKIP/TUNING o 1 or n Press either the SKIP/TUNING o
Repeat step 5 until you have
programmed up to 20 track
numbers into the CD Program
Memory. When the memory is
full, “- -” will blink in the display.
1 or n 2 button to select the next
track you wish to program. When
the desired track number appears
in the display, press the
PROGRAM/MEMORY/CLOCK
SET button 3 again.
2 button to select the first track that
you wish to program. When the
desired track number appears in the
display, press the PROGRAM/
MEMORY/CLOCK SET button 3
again.
After programming up to 20 tracks in the CD Program Memory, press
the PLAY/PAUSE (®p) button to begin programmed playback. “MEM”
will appear in the display and playback will begin on the first track that
you programmed. The player will continue to play all of the tracks that
you programmed in the order in which you programmed them. When
the last programmed track has been played, the player will start
playback the first track on the next disc. Playback will continue until all
the tracks on all the discs have played.
7
NOTE: When the programmed tracks are played, the player will start
playback the tracks on next disc and the programmed memory will be
cleared. To repeat playback the program, see below.
PROGRAMMED REPEAT
1
2
3
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, press the
CD MODE button twice to enter the
Repeat All mode and then program
the tracks you wish to hear in the
order you wish to hear them, as
described above. The "MEM"
indicator will flash and the "RPT"
indicator will appear in the display.
Programmed Repeat operation
will continue indefinitely until you
press the STOP (I) button.
Press the PLAY/PAUSE (®p)
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in
contact with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free,
dry cloth. Never use detergents or abrasive cleaners to
clean the compact disc. If necessary, use a CD cleaning kit.
• If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged
(scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other compact discs may not conform to the CD standard and may not play properly.
• Compact discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged
exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink,
may damage the surface.
Cleaning the unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
AM: Unit is not positioned correctly.
FM: Wire antenna is not extended.
Retune the AM or FM broadcast
station.
Rotate unit for best reception.
Extend wire antenna.
FM ST indicator
does not light.
Poor FM signal being received.
Retune station or try another station
that broadcasts in stereo.
Station is not broadcasting in stereo.
Tuner is not selected.
Change stations.
AM or FM, no sound.
Press the FUNCTION button to
select Tuner; AM or FM will appear.
Volume at minimum.
CD is not selected.
Increase volume.
Compact Disc Player
CD Player will not play.
Press the FUNCTION button to select
CD; one of the disc indicators will
blink and the others will light.
CD is not installed or is installed
incorrectly.
Insert CD with label facing up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No power.
Remote not working.
AC power cord is not connected.
Batteries not inserted, or inserted
incorrectly.
Connect AC power cord.
Insert batteries correctly.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL
Power Source (Main Unit)..........................................................................AC 120V, 60 Hz
Power Source (Remote Control) ..........................................DC 3V, 2 x “AAA” size battery
Speaker.............................................................................................................8 Ohms x 2
Output Power.......................................................................................................12.5W x 2
RADIO SECTION
Frequency Range (FM)...............................................................................87.5 - 108 MHz
Frequency Range (AM). .............................................................................530 - 1710 KHz
CD SECTION
Disc Diameter...............................................................................................4.72" (120mm)
......................................................................................................3.15" (80mm) Single CD
Optical Source ...................................................................................Semiconductor Laser
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|