Memorex Portable CD Player MX4118 User Manual

MX4118  
User’s Guide  
Home Audio System with  
CD Player and AM/FM  
Stereo Radio  
Before operating this product,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
please read these instructions completely.  
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your  
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your  
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer  
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One  
that lets the sound come through loud and clear without annoying blaring or distortion-and, most  
importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against  
this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,  
we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing  
damage from loud noise is often undetectable until it is too late, this manufacturer and the  
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged  
exposure to excessive noise. This list of sound levels is included for your protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
50  
60  
70  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
Rocket launching pad  
Information courtesy of the Deafness Research Foundation.  
EIA  
EST. 1924  
We  
WantYou  
LISTENING  
ForALifetime  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SERVICE SAFETY INSTRUCTIONS  
Before using the unit, be sure to read all operating instructions  
15. OVERLOADING  
carefully. Please note that these are general precautions and may not  
pertain to your unit. For example, this unit may not have the capability  
to be connected to an outdoor antenna.  
Do not overload wall outlets and extension cords as this can result in a  
risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
1. READ INSTRUCTIONS  
Never push objects of any kind into this product through openings as they  
may touch dangerous voltage points or short out parts that could result in  
fire or electric shock. Never spill or spray any type of liquid on the product.  
17. OUTDOOR ANTENNA GROUNDING  
All the safety and operating instructions should be read before the  
product is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
If an outside antenna is connected to the product, be sure the antenna  
system is grounded so as to provide some protection against voltage  
surges and built-up static charges. Section 810 of the National Electric  
Code, ANSI/NFPA 70, provides information with respect to proper  
grounding of the mast and supporting structure, grounding of the lead-  
in wire to an antenna discharge product, size of grounding conductors,  
location of antenna discharge product, connection to grounding  
electrodes and requirements for grounding electrodes.  
All warnings on the product and in the operating instructions should be  
adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this product from the wall outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.  
6. ATTACHMENTS  
ANTENNA  
LEAD IN  
WIRE  
Do not use attachments not recommended by the product's  
manufacturer as they may cause hazards.  
7. WATER AND MOISTURE  
GROUND  
CLAMP  
Do not use this product near water–for example: near a bathtub,  
washbowl, kitchen sink or laundry tub; in a wet basement; or near a  
swimming pool.  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
8. ACCESSORIES  
Do not place this product on an unstable cart, stand, tripod, bracket or  
table. The product may fall, causing serious injury and serious damage to  
the product. Use only with a cart, stand, tripod, bracket or table  
recommended by the manufacturer or sold with the  
product. Any mounting of the product should follow the  
manufacturer’s instructions, and should use a mounting  
accessory recommended by the manufacturer.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC - NATIONAL ELECTRICAL CODE  
S2898A  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
8A. An appliance and cart combination should be moved  
with care. Quick stops, excessive force and uneven  
surfaces may cause the appliance and cart  
combination to overturn.  
9. VENTILATION  
18. SERVICING  
Do not attempt to service this product yourself as opening or removing  
covers may expose you to dangerous voltage or other hazards. Refer  
all servicing to qualified service personnel.  
Slots and openings in the cabinet and in the back or bottom are  
provided for ventilation, to ensure reliable operation of the product and  
to protect it from overheating. These openings must not be blocked or  
covered. The openings should never be blocked by placing the product  
on a bed, sofa, rug or other similar surface. This product should never  
be placed near or over a radiator or heat source. This product should  
not be placed in a built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the manufacturer's instructions  
have been adhered to.  
19. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician  
uses replacement parts specified by the manufacturer or those that  
have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other hazards.  
20. SAFETY CHECK  
Upon completion of any service or repairs to this product, ask the  
service technician to perform safety checks to determine that the  
product is in proper operating condition.  
10. POWER SOURCES  
This product should be operated only from the type of power source  
indicated on the marking label. If you are not sure of the type of power  
supply to your home, consult your appliance dealer or local power  
company. For products intended to operate from battery power, or  
other sources, refer to the operating instructions.  
11. GROUNDING OR POLARIZATION  
21. WALL OR CEILING MOUNTING  
The product should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
22. DAMAGE REQUIRING SERVICE  
Unplug the product from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
This product is equipped with a polarized alternating-current line plug  
(a plug having one blade wider than the other). This plug will fit into the  
power outlet only one way. This is a safety feature. If you are unable to  
insert the plug fully into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the polarized plug.  
12. POWER-CORD PROTECTION  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the  
operating instructions, as an adjustment of other controls may result  
in damage and will often require extensive work by a qualified  
technician to restore the product to its normal operation.  
e. If the product has been dropped or the cabinet has been damaged.  
Power-supply cords should be routed so that they are not likely to be  
walked on or pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience receptacles, and the  
point where they exit from the appliance.  
f.  
When the product exhibits a distinct change in performance–this  
indicates a need for service.  
13. LIGHTNING  
23. HEAT  
The product should be situated away from heat sources such as  
To protect your product from a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line surges.  
14. POWER LINES  
radiators, heat registers, stoves or other products (including amplifiers)  
that produce heat.  
24. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer's attention  
to Article 820-40 of the NEC that provides guidelines for proper  
grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building, as close to the point  
of cable entry as practical.  
An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be fatal.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION FOR USE  
SPEAKER CONNECTION  
Locate the Speaker Jacks on the rear of the unit and connect the right speaker to the Right (R) Speaker jack  
and the left speaker to the Left (L) Speaker jack.  
CAUTION: Only connect the speakers which are supplied with the unit. The use of any other or additional  
speakers may cause damage to the unit. Never operate the unit without the speakers connected.  
HEADPHONE JACK  
To listen to the unit through headphones, simply insert headphones (not included) into the Headphone jack.  
The speakers will be disconnected when the headphones are plugged in.  
BATTERY OPERATION FOR THE REMOTE CONTROL  
The battery compartment is located on the rear of the remote control.  
• Remove the battery compartment door by pressing in on the tab and  
lifting the battery compartment door off.  
• Insert two (2) AAA size batteries into the battery compartment as shown  
to the right. Be sure to observe the polarity markings which are  
engraved inside the battery compartment. If the batteries are inserted  
incorrectly, the remote control will not operate.  
• Replace the battery compartment door.  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specified (alkaline are recommended).  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed  
batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or rechargeable) or old batteries with fresh  
ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible  
battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
(Follow battery manufacturer’s directions.)  
AC CONNECTION  
Unwind the AC cord and extend it to its full length. Insert the AC plug into any  
convenient 120V 60Hz household outlet.  
AC Outlet  
Please note that this unit is equipped with a polarized AC plug which has one  
blade wider than the other. This is a safety feature to reduce the likelihood of  
electric shock. This polarized AC plug will only fit in a polarized AC outlet. If  
AC Plug  
you find that you cannot insert this plug into your outlet, you may have an  
obsolete non-polarized outlet. Please do not try to defeat this safety feature by using a non-polarized  
adapter or by filing the wider blade to make it fit into your outlet. If this plug does not fit into your outlet, you  
should contact a qualified licensed electrician to replace your obsolete outlet.  
IMPORTANT NOTES:  
Before moving or lifting the unit, make sure the power plug is disconnected from the power source.  
If there is a power failure or the AC cord is disconnected, when the power is resumed or the AC cord is  
connected again. The clock will be reset ("12:00" will appear on the display) and you will need to set it  
again. However, the Radio Preset stations will be kept although there is a power failure or you  
disconnected the AC cord.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION FOR USE (CONTINUED)  
CONNECTING AN EXTERNAL UNIT  
You can connect an external unit to this unit, such as a cassette player, etc. Simply connect the supplied  
audio cable from the AUX IN jack on this unit to the external unit's AUX OUT jack. This will allow you to  
broadcast the external unit's sound through this unit. When the unit is on, if an external unit is connected via  
the AUX IN jack, the unit will change to AUX IN mode automatically; ''AUX'' will appear in the display.  
To power on the unit, press the Play/Pause/Power On button or RADIO AM/FM/POWER ON button on the  
remote control or on the main unit . To power off the unit, press the Power Off/Stop/Clock set button on the  
remote control or on the unit.  
NOTES:  
• Connecting the unit to an external audio source will allow you to broadcast the external unit’s sound  
through this unit’s speakers.  
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.  
• When connecting the external unit, make sure the power is off and both units are unplugged before  
making any connections.  
• If using the CD or Radio function, make sure the audio cable is disconnected from the AUX IN jack.  
REMOTE SENSOR  
To operate the unit with the remote control, point the remote at the remote sensor on the front of the main  
unit and press the appropriate button. The remote control has an effective operating range of approximately  
15 feet and an angle of no more than 30°.  
NOTE: Bright sunlight may interfere with the operation of the remote control.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
FRONT  
1. SLEEP Button  
10. PROGRAM/MEMORY Button  
2. RADIO AM/FM/POWER ON Button 11. VOLUME + Button  
3. EQ/TIMER Button  
4. ALARM/MODE/MEM+ Button  
5. Display  
12. VOLUME – Button  
13. REPEAT/CLOCK Button  
14. Remote Sensor  
6. TIME - /TUNING/SKIP/SEARCH o 15. STOP (I)/TIME SET/POWER OFF  
Button  
Button  
7. TIME + /TUNING/SKIP/SEARCH  
N Button  
16. PLAY/PAUSE (®p)/POWER ON  
Button  
8. AUX IN Jack  
17. Headphone Jack  
9. CD DOOR OPEN Button  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS (CONTINUED)  
REAR  
1. Speaker Jacks  
2. AC Cord  
3. FM Wire Antenna  
1. VOLUME + Button  
2. RADIO AM/FM/POWER  
ON Button  
3. PLAY/PAUSE (®p)/  
POWER ON Button  
4. TIME - /TUNING/  
SKIP/SEARCH o Button  
5. VOLUME – Button  
6. PROGRAM/MEMORY  
Button  
REMOTE  
7. STOP (I)/TIME SET/  
POWER OFF Button  
8. EQ/TIMER Button  
9. SLEEP Button  
10.TIME +/TUNING/  
SKIP/SEARCH n Button  
11. ALARM/MODE/MEM+  
Button  
12. REPEAT/CLOCK Button  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
SETTING THE CLOCK  
1
2
3
1
2
While the unit is off (the clock To set the hour, press the TIME-/ When the hour is set, press the  
appears in the display), press the  
STOP (I)/TIME SET/ POWER  
OFF button; the hour digit(s) will  
blink in the display.  
STOP (I)/TIME SET/POWER  
OFF button again; the minute  
digits will blink in the display.  
TUNING/SKIP/SEARCH o button  
1 to decrease and/or the TIME  
+/ TUNING/SKIP/SEARCH n  
button 2 to increase the hour.  
Press and hold either button for  
rapid searching.  
4
5
1
2
When the minute is set, press the  
STOP (I)/TIME SET/POWER  
OFF button again; the clock will  
be set and the colon will blink.  
To set the minute, press the  
TIME -/TUNING/SKIP/SEARCH  
o button 1 to decrease and/or  
the  
TIME +/TUNING/SKIP/  
SEARCH n button 2 to increase  
the minute. Press and hold either  
button for rapid searching.  
SELECTING BETWEEN CD  
AND RADIO MODE  
PRESET EQ  
TURNING THE UNIT ON/OFF  
1
1
2
1
1
1
2
3
With the power on, press the  
EQ/TIMER button to cycle  
through the preset EQ settings or  
to turn the EQ off. Each press of  
the PRESET EQ button will cycle  
as follows: JAZZ, ROCK, POP,  
CLASSIC, Off.  
If the unit is in CD mode, press  
Press the PLAY/PAUSE (®p)/  
POWER ON button 1 or RADIO the RADIO AM/FM/POWER ON  
AM/FM/POWER ON button 2 to  
turn the unit on; the display will light  
brightly. Press the STOP (I)/TIME  
SET/POWER OFF button 3 while  
in the CD stop mode or Radio  
mode to turn the unit off.  
button 1 to change to Radio  
mode OR If the unit is in RADIO  
mode, press the PLAY/PAUSE  
(®p|)/POWER ON button 2 to  
change to CD mode.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
LISTENING TO THE RADIO  
1
2
3
1
2
Press the RADIO AM/FM/ Press the RADIO AM/FM/ MANUAL TUNING: Repeatedly  
POWER ON button to turn the POWER ON button to select AM press the TIME/TUNING/  
unit on; "AM" or "FM" and the or FM.  
frequency will appear in the  
display.  
SKIP/SEARCH o 1 or n 2  
button to manually advance the  
frequency in the display up or  
down until the desired frequency  
appears.  
4
5
2
1
2
3
1
AUTOMATIC TUNING: Press  
and hold the TIME/TUNING/  
SKIP/SEARCH o 1 or n 2  
button until the frequency in the  
display starts to scan, and then  
release the button; the tuner will  
search and then stop on the next  
strong station it finds. Repeat this  
step until the desired frequency  
appears in the display.  
Press the EQ button 1 and adjust  
the volume using the VOLUME +  
2 or – 3 button as desired.  
To turn the unit off, press the  
STOP (I)/TIME SET/POWER  
OFF button 3.  
Hints for Better Reception  
AM–The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so that  
the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the  
position that provides the strongest reception for each of your favorite AM stations.  
FM–Make sure that the FM Wire Antenna is extended to its full length. You may have to vary the direction of  
the antenna to find the strongest signal for each FM station.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
SETTING RADIO PRESETS  
This unit can preset 10 AM and 10 FM radio stations for convenient recall.  
1
2
3
1
2
Press the RADIO AM/FM/ Press the RADIO AM/FM/ Press the TIME/TUNING/  
POWER ON button to turn the POWER ON button to select AM  
unit on; "AM" or "FM" and the or FM.  
frequency will appear in the  
SKIP/SEARCH o 1 or n 2  
button to select a station.  
display.  
4
5
6
2
1
Press the PROGRAM/MEMORY Press the PROGRAM/MEMORY Repeat steps 3 through 5 to  
button again to set the station in program up to 10 stations in each  
button 1; the preset number will  
blink in the display. Press the  
ALARM/MODE/MEM+ button 2  
until the desired memory number  
appears on the display.  
the selected memory.  
band, if desired.  
RECALLING RADIO PRESETS (10 EACH BAND)  
1
2
3
2
3
1
Follow steps 1 and 2 above.  
Press the ALARM/MODE/MEM+  
button to select a preset; the  
station will automatically be tuned  
in.  
Press the EQ button 1 and adjust  
the volume using the VOLUME +  
2 or – 3 button as desired.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
PLAYING COMPACT DISCS  
This unit can play standard, CD-R or CD-RW CDs.  
1
2
3
If there is no disc inside the CD  
compartment, press the DOOR  
OPEN button on the main unit to  
open the CD door and gently  
press CD with label side facing  
front onto the spindle until it locks  
in place. Close the CD door; the  
CD will automatically start playing.  
If the unit is in the Radio mode,  
Press the PLAY/PAUSE (®p)/  
POWER ON button to turn the  
press the PLAY/PAUSE (®p|)/  
unit on; the display will light POWER ON button to select CD;  
brightly.  
the CD indicator will appear will  
NOTE: If a CD disc is inserted, appear in the display. If a CD disc  
the CD will start playing is inserted, the CD will start  
automatically.  
playing automatically.  
4
5
2
3
1
To stop playback before the disc  
ends, press the STOP (I)/TIME  
SET/ POWER OFF button. Press  
the STOP (I)/TIME SET/POWER  
OFF button again to turn the unit  
off.  
Press the EQ button 1 and adjust  
the volume using the VOLUME +  
2 or – 3 button as desired.  
Playback will continue until all the  
tracks on the disc have been  
played  
CD PAUSE CONTROL  
1
2
During CD playback, if you wish to  
pause the disc momentarily, press  
the PLAY/PAUSE (®p)/POWER release pause and resume  
ON button. Playback stops but the  
disc continues to spin and the  
time display will blink.  
Press the PLAY/PAUSE (®p)/  
POWER ON button again to  
normal CD playback.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (  
/
)
1
2
3
During playback, depress and  
hold either the TIME/TUNING/  
SKIP/SEARCH n or o button to  
move the player forward or  
backward within a track to locate  
a specific musical passage. The  
player will move forward or  
backward at high speed as long  
as the button is depressed. When  
you release the TIME/TUNING/  
SKIP/SEARCH n or o button,  
normal playback will resume.  
During playback, press the TIME -/  
During playback, press the TIME +/  
TUNING/SKIP/SEARCH n button TUNING/SKIP/SEARCH o button  
once to advance the player to the  
beginning of the next track. Press  
once to move the player back to the  
beginning of the current track. Press  
the  
SEARCH o button repeatedly to  
move the player back to lower-  
numbered tracks.  
the  
TIME +/TUNING/SKIP/  
TIME -/TUNING/SKIP/  
SEARCH n button repeatedly to  
advance the player to higher-  
numbered tracks.  
RANDOM PLAYBACK  
1
2
3
To play the tracks on the CD in a  
random order, press the ALARM/  
MODE/MEM+ button while in the  
Stop mode; “RANDOM” will  
appear in the display  
To stop and cancel Random  
Press the PLAY/PAUSE (®p)/  
POWER ON button and the playback, press the STOP (I)/  
tracks will play in a random order.  
TIME SET/POWER OFF button  
once, the unit will stop the  
random playback and "RANDOM"  
will disappear from the display.  
INTRO PLAYBACK  
3
1
2
To stop and cancel INTRO  
To hear the first 10 seconds of  
each track, press the ALARM/  
MODE/MEM+ button twice while  
in the Stop mode; “INTRO” will  
appear in the display.  
Press the PLAY/PAUSE (®p)/  
playback, press the STOP (I)/  
POWER ON button and the first  
10 seconds of each track will TIME SET/POWER OFF button  
play.  
once, the unit will stop the intro  
playback and "INTRO" will  
disappear from the display.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
REPEAT PLAYBACK ONE TRACK OR ALL TRACKS  
1
2
3
3
2
1
To repeat a single track, press the To repeat all of the tracks on a To cancel Repeat Playback,  
REPEAT/CLOCK button once disc continuously, press the press the REPEAT/CLOCK  
REPEAT/CLOCK button twice button until “REPEAT 1” and  
while in the Play mode; “REPEAT “REPEAT ALL” indicators  
ALL” will light in the display. All disappear from the display.  
tracks on the disc will be repeated  
while in the Play mode; “REPEAT  
1” will appear in the display.  
Press the TIME/ TUNING/SKIP/  
SEARCH n 2 or o 3 button to  
select the specific track that you  
wish to repeat. The specific track  
you selected will be repeated  
continuously.  
continuously.  
PROGRAMMED PLAYBACK  
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks  
on any disc for playback in any desired order. You may program 20 different tracks or you may also program  
certain tracks to play more than once.  
To perform Programmed playback, proceed as follows:  
1
2
3
1
3
2
2
1
With the unit on and a CD Press the STOP (I)/TIME SET/  
Press the TIME/ TUNING/SKIP/  
SEARCH o 1 or n 2 button to  
select the first track that you wish to  
inserted, press the PLAY/PAUSE  
POWER OFF button 1 to stop  
automatic playback. Press the  
(®p)/POWER  
ON  
button  
repeatedly to select CD (if in a  
mode other than CD); the CD  
indicator will appear in the display  
and will automatically start  
playing.  
PROGRAM/MEMORY button 2; program. When the desired track  
“P01”  
(program  
number),  
number appears in the display,  
press the PROGRAM/MEMORY  
button 3 again.  
“PROGRAM” and “00” (track  
number) will appear in the  
display.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
5
4
1
3
1
2
2
3
Press either the TIME/ TUNING/ Repeat step 5 until you have  
programmed up to 20 track  
numbers into the CD Program  
Memory. When the memory is  
full, it will stay on program 20.  
SKIP/SEARCH o 1 or n 2 button  
to select the next track you wish to  
program. When the desired track  
number appears in the display,  
press the PROGRAM/MEMORY  
button 3 again.  
After programming up to 20 tracks in the CD Program Memory, press  
the PLAY/PAUSE (®p)/POWER ON button 1 to begin Programmed  
playback. “PROGRAM” will appear in the display and playback will  
begin on the first track that you programmed. The player will continue  
to play all of the tracks that you programmed in the order in which you  
programmed them. When the last programmed track has been played,  
the player will stop. To play back the program again, press the  
PLAY/PAUSE (®p)/ POWER ON button 1.  
6
1
2
To clear the CD Program Memory, while in the Stop mode, press the  
STOP (I)/TIME SET/POWER OFF button 2 to clear the programmed  
memory. Press the STOP (I)/TIME SET/POWER OFF button 2 a  
third time to turn the unit off.  
PROGRAMMED REPEAT  
1
2
3
1
2
It is also possible to use the  
Program and Repeat functions  
together to repeat a specific  
program indefinitely. First, program  
the tracks in the order you wish to  
hear them as described above.  
The "PROGRAM" indicator will  
appear in the display.  
Programmed Repeat playback  
will continue indefinitely until you  
press the STOP (I)/TIME SET/  
Press the PLAY/PAUSE (®p)/  
POWER ON button 1 to begin  
the Programmed playback; then  
press the REPEAT/CLOCK POWER OFF button.  
button 2 twice to enter the repeat  
All mode; "REPEAT ALL" will  
appear in the display. The player  
will play the tracks you selected in  
the order in which you  
programmed them. When the last  
track in the program has been  
played, the entire program will  
begin again.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
SETTING THE TIMER  
Set the timer to turn the unit on and off to the Tuner or CD mode at a preset time as follows:  
1
2
3
1
4
2
2
3
1
With the power off, press the Press the ALARM/MODE/MEM+  
Press  
the  
TUNING/SKIP/  
button to select the desired wake  
up function (CD or RADIO). Make  
sure to insert a CD or tune a  
station as desired before turning  
the unit off.  
REPEAT/CLOCK button 1 and  
SEARCH/TIME o 1 or n 2 button  
to set the timer On hour and then  
press the STOP (I)/TIME SET/  
POWER OFF button 3 again; the  
minutes will blink.  
then press the STOP (I)/TIME  
SET/ POWER OFF button 2  
within 5 seconds to enter the  
Timer ON setting mode; “TIMER”  
will appear and the hour will blink  
on the display.  
Press the TIME/TUNING/SKIP/SEARCH o 1 or n 2 button to set the  
timer On minute and then press the STOP (I)/TIME SET/POWER  
4
OFF button 3 again; the timer will then be set. When the actual time  
matches the Timer’s On time, the unit will turn on to the function  
selected in Step 2. To turn off the timer, press the EQ/TIMER button 4;  
the unit will turn off.  
1
4
2
3
TO ACTIVATE THE TIMER ON MODE, with the unit off, press the EQ/TIMER button; “TIMER” will appear in  
the display next to the current time. To cancel, press the EQ/TIMER button again; “TIMER” will disappear in  
the display.  
NOTES:  
Before activating the timer, make sure the unit is in the Standby mode. Otherwise, there will not be sound  
when the Timer’s On time is reached.  
Before activating the timer, make sure there is a disc inside the CD compartment when waking to a CD,  
or make sure a AM/FM station is tuned before turning off the unit. Otherwise, there will not be sound  
when the Timer’s On time is reached.  
When TIMER On time is reached, the unit will turn on for CD or Radio for 1 hour then turn off. If the CD  
disc total tracks is below 1 hour, then the unit will playback all the tracks on the CD and then stop.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS (CONTINUED)  
ACTIVATING THE SLEEP FUNCTION  
Set the sleep timer as follows:  
1
2
With the unit is on, press the Press the SLEEP button a second  
SLEEP button and “OFF” and time to set the unit to turn off after  
“SLEEP” will appear in the 60 minutes. Each additional press  
display. Press the SLEEP button with decrease the sleep time (90,  
again; “90” will appear in the 60, 45, 30, 15, OFF). Press the  
display and the unit will turn off SLEEP button repeatedly until  
after 90 minutes.  
“OFF” appears in the display to  
deactivate the Sleep feature.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
Caring for Compact Discs  
• Treat the compact disc carefully. Handle the compact disc  
only by its edges. Never allow your fingers to come in  
contact with the shiny, unprinted side of the compact disc.  
• Do not attach adhesive tape, stickers, etc. to the compact  
disc label.  
• Clean the compact disc periodically with a soft, lint-free,  
dry cloth. Never use detergents or abrasive cleaners to  
clean the compact disc. If necessary, use a CD cleaning kit.  
• If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged  
(scratched).  
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer  
edge of the compact disc. Never wipe in circular motions.  
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.  
Other compact discs may not conform to the CD standard and may not play properly.  
• Compact discs should be stored in their cases after each use to avoid damage.  
• Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged  
exposure or extreme temperatures can warp the compact disc.  
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink,  
may damage the surface.  
Cleaning the Unit  
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.  
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution  
when cleaning and wiping the plastic parts.  
• Mild soap and a damp cloth may be used on the front panel.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
Should this unit exhibit a problem, check the following before seeking service:  
Symptom  
Radio  
Possible Cause  
Solution  
Noise or sound distorted  
on radio broadcasts.  
Station not tuned properly for  
AM or FM.  
Retune the AM or FM broadcast  
station.  
AM: Unit is not positioned correctly.  
FM: Wire antenna is not extended.  
Rotate unit for best reception.  
Extend wire antenna.  
AM or FM, no sound.  
Tuner is not selected.  
Press the RADIO AM/FM button to  
select Tuner; AM or FM will appear.  
Volume at minimum.  
Increase volume.  
Compact Disc Player  
CD Player will not play.  
CD is not selected.  
Press the PLAY/PAUSE (®p)/  
POWER ON button to select CD;  
the CD indicator will appear in  
the display.  
CD is not installed or is installed  
incorrectly.  
Insert CD with label facing forward.  
CD skips while playing.  
Disc is dirty or scratched.  
Wipe disc with cloth or use  
another disc.  
General  
No power.  
AC power cord is not connected.  
Connect AC power cord.  
Insert batteries correctly.  
Remote not working.  
Batteries not inserted, or inserted  
incorrectly.  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED  
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
GENERAL  
Power Source (Main Unit)..........................................................................AC 120V, 60 Hz  
Power Source (Remote Control) ..........................................DC 3V, 2 x AAA” size battery  
Speaker.............................................................................................................4 Ohms x 2  
Output Power.......................................................................................................12.5W x 2  
RADIO SECTION  
Frequency Range (FM). ...............................................................................87.5–108 MHz  
Frequency Range (AM)................................................................................520–1710 KHz  
CD SECTION  
Disc Diameter...............................................................................................4.72" (120mm)  
Optical Source ...................................................................................Semiconductor Laser  
Specifications are subject to change without notice.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memcorp, Inc.  
Weston, FL  
Printed in Hong Kong  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kustom Stereo Amplifier KGA16 User Manual
Kyocera Cell Phone VMS200 User Manual
La Crosse Technology Clock WS 6003U User Manual
Learning Resources Binoculars LPK2446 BKR User Manual
Lincoln Electric Welder IM10096 User Manual
Lochinvar Boiler G936199 User Manual
Makita Power Hammer BHR200SH User Manual
Marantz CD Player CD110 User Manual
MAXDATA Computer Accessories 501302SD8GCL10 User Manual
Maytag Water Heater HRX40HARS User Manual