Mellerware Iron 23300A User Manual

adria ver II  
steam iron  
M o d e l :  
2 3 3 0 0 A  
1400W  
PLEASE READ ALL INSTRUCTIONS BEFORE USE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23300A_IM.indd  
1
2011/11/30 08:43:17  
KEY and CHARACTERISTICS  
A
B
C
G
E
H
D
F
Description  
A
B
C
Spray button  
Steam blast button  
Steam regulator knob /  
Self-cleaning function  
Spray nozzle  
D
E
F
Filling hole  
Sole plate  
G
H
Temperature control dial  
Pilot light  
CHARACTERISTIC  
Temperature Dial Knob  
Power Indicator Light  
FUNCTION  
Adjust temperature according to fabric to be ironed.(see table below)  
Indicator light will go off when desired temperature is reached. The light will go on  
and off as the temperature is regulated by the adjustable thermostat.  
Super smooth non stick ironing surface. If ironing surface is sticky ensure  
temperature setting is correct as per table below and item being ironed is clean.  
Using the measuring cup only, fill the tank with clean water here. Use demineralized  
water in hard water areas or water with lime scale.  
Soleplate  
Water Filling Aperture  
Transparent Water Tank  
Dry/Steam Iron Selector  
Spray Button  
Do not overfill. Water level in tank is easily visible during ironing.  
Choose desired level of steam or dry ironing by rotating the knob  
Depress for spraying water onto fabric for dry ironing or when required.  
Depress the strong steam button for extra surge of steam for ironing out difficult  
creases or if steam is required when iron is in the vertical position.  
Strong Steam  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23300A_IM.indd  
3
2011/11/30 08:43:18  
- Set the temperature control dial to the correct  
temperature as indicated in the ironing  
IRONING INSTRUCTIONS  
instructions on the label or as per table above.  
- The correct temperature will be reached when  
the indication light has switched off. The indication  
light will go on and off from time to time indicating  
that the selected temperature is being maintained.  
Note: The iron may smoke slightly when  
switched on for the first time. This is normal and  
will soon cease.  
Please read these instructions carefully before use.  
Important!: have you read the section “Important Safe-  
guards”?  
CHOICE OF WATER  
- This iron can be used with normal tap water.  
- If the water in your area is particularly hard. It is  
advisable to use distilled or demineralized water to  
prevent the scale forming on the critical point of the  
iron.  
- Do not use chemically de-scaled water.  
Note: Water may leak from the soleplate if the  
temperature selected is too low.  
This will then cause stains. If it happens, set  
the temperature control to the advised position  
for steam ironing. Steaming will re-commence  
as soon as the appropriate temperature has  
been reached.  
SPRAYING  
- At any temperature by pressing on the spray  
button a couple of times, the laundry can be  
damped down.  
- Ensure that there is enough water in the water  
tank.  
FILLING WITH WATER  
- Ensure that the iron is disconnected from the pow-  
er supply before filling.  
- Turn the dry/steam selector dial to “0” or dry  
position.  
- Fill water through the aperture using the measur-  
ing cup only. (If you fill the iron at the tap, water can  
spill into the electrics and trip your earth leakage or  
blow the iron.)  
Note* Do not fill higher than indication “MAX”  
of the water tank, In order to avoid spilling out  
of water.  
- Do not fill with any thing but clean water. If you  
have to refill while ironing, remove the mains  
plug from the wall socket before filling.  
- Pour out any remaining water after use.  
SETTING THE TEMPERATURE  
- Insert the plug in the wall socket and stand the  
iron upright.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23300A_IM.indd  
4
2011/11/30 08:43:20  
• Always store the iron in an upright position.  
DRY IRONING  
• Insert the plug into the wall socket.  
• Ensure that the dry/steam selector button (C) is  
in position“0”.  
• Select the setting on the temperature control  
dial best suited for the fabric to be ironed.  
• When the indication light has switched off, iron-  
ing may commence.  
STEAM-IRONING  
• As indicated on the temperature control dial  
and the temperature table, steam ironing is only  
possible at higher ironing temperature.  
• Ensure that there is enough water in the water  
tank.  
• Stand the iron upright.  
SAVE THESE INSTRUCTIONS FOR FUTURE  
REFERENCE  
Note: When using the iron for the first time,  
test on an old piece of fabric to ensure that  
the sole plate and water tank is completely  
clean.  
• Insert the plug into the wall socket.  
• Set the temperature control dial to the steam  
position.  
• Wait a little while for the power indication light to  
switch off and to come on again.  
• Set the dry/steam selector knob to the steam  
position. The steam will emerge from the vents in  
the sole plate when the iron is held in the horizon-  
tal position.  
SAFETY PROTECTIVE CUT – OUT  
In the unlikely event of the thermostat failing, the  
protection cut – out will operate to prevent the iron  
overheating. The iron should then be taken to an  
authorized dealer/service agent for repair.  
CARE AND CLEANING  
• Before cleaning the iron, ensure it is discon-  
nected from the power supply and has completely  
cooled down.  
IMPORTANT SAFEGUARDS  
•Please read all instructions before use.  
• Ensure the voltage rating on the rating label  
corresponds to the main voltage in your home.  
• Use the iron only for its intended use.  
• The iron should always be switched off before  
connecting or disconnecting from the power  
supply. Never yank/pull the cord to disconnect  
the plug from the wall socket.  
• Deposits and other residues on the soleplate  
can be removed with a rough cloth soaked in a  
vinegar/water solution.  
• The housing/body may be wiped with a damp  
cloth and then polished with a dry one.  
• Do not use abrasives on the sole plate.  
• Keep the soleplate smooth: avoid hard contact  
with metal objects.  
• Do not operate the iron with a damaged cord or  
plug. Never use the iron if it is damaged in any way.  
To avoid the risk of electric shock, do not  
disassemble the iron. Take it to a qualified service  
centre for examination and repair. Incorrect  
reassembling can cause electric shock when the  
iron is used.  
• NOTE: Ironing dirty fabric or fabric not rinsed  
fully will result in the iron sticking and dirt  
accumulating on the bottom of the soleplate, as  
will an iron set at too high a temperature for the  
relevant fabric.  
STORAGE  
• When leaving the appliance momentarily always  
switch it off, remove the plug from the wall socket  
and stand the iron on its rear panel.  
• Turn the temperature control dial to “MIN” and  
set the steam selector dial to position “0”.  
(“0”=No Steam).  
• Take care that children cannot touch the iron  
when the iron is hot and make sure they cannot pull  
the mains cord.  
• Disconnect the plug from the wall socket.  
• Pour any remaining water out of the water tank.  
Then cover the filler cap.  
•To protect against the risk of electric shock, do  
not immerse the iron, cord or plug in water or other  
liquids.  
• Stand the iron upright and let it cool down  
completely.  
• The power cord can be wraped around the iron  
when it has cooled down.  
• Burns can occur from touching hot metal parts,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23300A_IM.indd  
5
2011/11/30 08:43:20  
hot water or steam, take caution when you turn a  
steam iron upside down: there may be hot water in  
the tank.  
• Do not allow the supply cord to come into contact  
with hot surfaces. Let the iron cool down completely  
before transporting, moving or storage. Wrap the  
power supply cord around the iron when storing.  
• Always disconnect the main plug from wall  
socket before filing the iron with water or pouring the  
remaining water out.  
• To avoid an overloaded circuit, do not operate  
another high voltage appliance in the same electric  
circuit.  
• If an extension cord is absolutely necessary, a  
10-ampere (Europe) or 15 ampere (America) cord  
should be used. Cords rated for less amperage may  
overheat. Care should be taken to arrange the cord  
so that it cannot be pulled or tripped over.  
• This iron is for household use only.  
• Do not operate the iron with wet hands.  
• Do not touch the plug or power supply cord with  
wet hands.  
• The iron should not be picked up or carried by the  
power supply cord.  
•This appliance is not intended for use by persons  
(including children) with reduced physical, sensory  
or mental capabilities, or lack of experience and  
knowledge, unless they have been given supervi-  
sion or instruction concerning use of the appliance  
by a person responsible for their safety.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23300A_IM.indd  
6
2011/11/30 08:43:21  
TROUBLE SHOOTING  
Problem  
Reason  
Action  
Pre-caution  
Iron is leaking water.  
Temperature is too low  
Set the temperature to steam setting (cotton)  
Check fabric type is suitable for high steam  
temperature  
Steam switch is on self clean  
function  
Turn steam switch setting to steam or 0  
position  
Switch steam setting to 0 (off) after use or  
when filling tank.  
Tank is overfilled  
Empty water tank  
Fill to MAX mark only.  
Iron is in the horizontal position  
too long.  
When adjusting item place iron down in the  
vertical position  
If iron is left on the item in the horizontal  
position for too long it may burn the fabric.  
Check temperature setting is suitable for  
fabric type.  
Iron is not heating up  
Temperature control dial is in  
the off position  
Turn the temperature control dial to the  
desired temperature setting.  
Switch on household socket  
Check the socket with another appliance  
Household socket is off.  
Household socket is not  
working  
Ensure iron is in the upright position.  
Appliance must be of similar wattage to  
prevent overloading.  
Iron is tripping mains  
Overloaded circuit.  
Unplug all appliances attached to the same  
circuit and check iron.  
Note that there can be up to 5 household  
plug sockets on 1 circuit.  
Iron sticking to clothing  
Temperature is too hot  
Turn down temparature on control dial.  
Clean and rinse item.  
Check temperature setting is suitable for  
fabric type.  
Clothing is dirty or not rinsed  
thoroughly.  
Use spray function to dampen item and  
check temperture is correct.  
Use a old linen cloth to remove any trace  
of dirt on the soleplate. Use iron soleplate  
cleaner for bad marks.  
Creases not coming out  
Not Enough Steam  
Item is too dry or temperature  
too low.  
Use steam function.  
Check temperature setting is suitable for  
fabric type.  
The steam control is off or set  
too low.  
Set the steam button/switch to on or full.  
Ensure temperature control dial is set to the  
3 dot position for steaming.  
Check temperature setting is suitable for  
fabric type.  
The iron temperature is  
too low.  
Set temperature control dial to MAX or 3 dot  
position for steaming.  
The steam valve is blocked  
due to water scale.  
If your iron is fitted with a self clean function  
carry out cleaning as per instructions.  
Use distilled or demineralised water in your  
iron to prevent blocking.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23300A_IM.indd  
7
2011/11/30 08:43:21  

Kyocera All in One Printer 9530DN User Manual
Leica Digital Camera 18485 User Manual
Lindy Computer Hardware 70531 User Manual
Linksys Network Card WUSB200 User Manual
Logitech Webcam C310 User Manual
Makita Grinder GD0602 User Manual
Maytag Refrigerator MFI2067AEW User Manual
Melissa Toaster 643 108 User Manual
Memorex DVD VCR Combo MVD2026 User Manual
Mercedes Benz Automobile S 350 User Manual