Instruction Manual
ETX-80AT-BB Backpack Observatory
MEADE.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Quick-Start Guide .......................................................... 4
Telescope Features ...................................................... 6
AutoStar® Features ........................................................10
Getting Started ..............................................................13
Parts Listing ..............................................................13
Telescope/Tripod Assembly ......................................13
Stowing Your Gear in the Backpack..........................14
Safety Precautions....................................................14
Choosing an Eyepiece..............................................15
Manual Operation of the Telescope w/out AutoStar..15
Manual Operation of the Telescope with AutoStar....16
Slew Speeds ............................................................16
Observe the Moon ....................................................17
To Track an Object Automatically ..............................17
Moving Through AutoStar’s Menus ..........................17
Initializing AutoStar ..................................................17
Easy Alignment ........................................................19
Go To Saturn ............................................................19
Using the Guided Tour ..............................................20
AutoStar Menus ............................................................21
Menu Tree ................................................................21
AutoStar Operation ........................................................22
AutoStar Navigation Exercise ..................................22
Entering Data, Moving Through AutoStar’s Menus ..23
Objects Menu............................................................24
Event Menu, Glossary Menu ....................................25
Utilities Menu ............................................................25
Setup Menu ..............................................................26
Advanced AutoStar Operation........................................29
Terrestrial Observing, Astronomical Observing ......29
Sidereal Rate ............................................................29
Advanced Alt/Az Alignment Methods........................29
Observing Satellites..................................................30
Digital Photography with the ETX® ............................31
Optional Accessories......................................................33
Maintenance ..................................................................34
Troubleshooting ........................................................35
Specifications ................................................................36
Appendix A: Using AutoStar to Enter Coordinates ........38
Appendix B: Latitude Chart ............................................39
Appendix C: Training the Drive ......................................40
Appendix D: Basic Astronomy........................................41
WARNING!
®
Never use a Meade Telescope to look at
the Sun! Looking at or near the Sun will
cause instant and irreversible damage to
your eye. Eye damage is often painless, so
there is no warning to the observer that
damage has occurred until it is too late. Do
not point the telescope or its viewfinder at or
near the Sun. Do not look through the
telescope or its viewfinder as it is moving.
Children should always have adult
supervision while observing.
CAUTION: Use care to install batteries in
the orientation indicated by illustration in the
battery slots of the battery holder. Follow
battery manufacturer's precautions. Do not
install batteries backwards or mix new and
used batteries. Do not mix battery types. If
these precautions are not followed, batteries
may explode, catch fire, or leak. Improperly
installed batteries void your Meade warranty.
If you are anxious to use your telescope
for the first time, read the QUICK-START
GUIDE on page 4.
® The name “Meade,” the Meade logo, and “ETX” are trade-
marks registered with the U.S. Trademark and Patent Office
and in principal countries throughout the world. All rights
reserved.
Patents: US 6,392,799 and other patents pending.
© 2005 Meade Instruments Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK-START GUIDE
Setting up the Tripod
Step 1: Remove the telescope and tripod from the giftbox.
Step 2: Hold the tripod by its handle and turn the locking
ring to loosen the tripod mechanism. Push down on the lock-
ing ring as far as it will go to spread out the tripod legs. Turn
the locking ring to tighten the tripod in place.
Step 3: You can adjust the height of the tripod, by lifting a
leg lock lever and sliding the inner leg in or out to the
desired length. Then re-tighten the lock. Repeat for the other
two legs.
Step 2a: Loosen the locking ring....
Step 4: Use the tripod on level and even ground. Pointing
accuracy depends on the base of the tripod being level with
the horizon. The bubble level on top of the tripod can help
determine if the base is level: Move the base until the bubble
is in the center of the circle.
Attach the Telescope to the Base
Step 5: Thread the supplied bolts about two or three turns
through the underside of the telescope base.
Step 6: Line up the bolts over the key-like holes on the base
of the tripod and slide the bolts into the holes. Rotate the
telescope clockwise until the bolts fit into the hole bays.
Then, reach under the tripod base and tighten the bolts to a
firm feel.
Step 2b: ...and push down as far
as it will go to open tripod.
Step 7: Loosen the vertical lock and move the optical tube
downward. Then, re-tighten the vertical lock.
Step 8: Remove the inverted dewshield from the end of the
telescope. Unthread the dust cover to remove from the
scope. Thread the dewshield over the end of the telescope.
Step 9: Remove the eyepiece caps from the 90 degree eye-
piece holder and the rear cell port. Screw on the 45 degree
prism to the rear cell port. You can put two eyepieces into
this telescope at the same time.
Step 6: Attach bolts and thread
into key-like holes.
Step 10 : Slip a lower power eyepiece, such as a 25mm or
26 mm eyepiece into the 45 degree prism and another eye-
piece into the 90 degree holder.
You can switch between the two eyepieces by turning the flip
mirror control to the up or down position.
Step 7: Loosen vertical lock to
move optical tube.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 11 :Secure the eyepieces in place with their
respective thumbsrews. Always start observing using a low
power eyepiece to get a nice widefield of view. Later on you
can change to high power, if so desired. But high powered
eyepieces have a much narrower field of view and it’s more
difficult to locate objects using high powered eyepieces.
Step 12 :You can focus the eyepieces by turning the focus
knob. The focus knob has a very fine focus, so you may
have to turn the knob 20 complete turns or more to focus
on an object.
Step 13: Focus insert batteries.
Connect the AutoStar Handbox
Step 13: Lift the battery cover. Gently remove the battery
holder from the compartment so you don’t accidentally pull
out the wires attached to the holder. Insert 6 user supplied
“AA” batteries in the holder. Refer to the diagram on the
holder to orient the batteries properly. Replace the holder
back into the battery compartment and replace the lid.
Step 14: Make sure that the computer control panel power
switch is in the OFF position. Remove AutoStar from the
packing materials and plug it into the HBX port.
Step 14: Plug in handbox and turn
on computer control panel.
Flip the Power Switch on the computer control panel to the
ON position. The copyright message lights on AutoStar’s
LCD display.
Step 15: Press the key prompted by AutoStar to accept the
Sun warning.
Observe
Step 16: You can now use the AutoStar Arrow keys to move
the telescope up, down, right, or left. To change the tele-
scope’s slew speed, briefly press the Speed/? key. Each
press decreases the slew speed down one level, and then
Step 17: Sight along the top of the will cycle back to the fastest speed.
optical tube.
Step 17: Sight along the side of the telescope’s main tube
to locate an object. At first, practice during the daytime
using the AutoStar’s Arrow keys to center on objects in the
telescope’s field of view. Observe trees, mountains, signs
and so forth. Then when you’re comfortable locating objects
in this manner, try at night on the Moon, planets and stars.
Flip Barlow in
down position.
Note about the Flip Barlow: To use the built-in 2x Barlow,
rotate the the Flip Barlow control so that it is in the down
position (see diagram, left). The Flip Barlow doubles the
magnification of your eyepiece.
If you use the Flip Barlow, you will need to turn the focus
knob in a counterclockwise direction. You may have to turn
the focus knob 20 or more turns to focus with the Barlow
engaged.
Note: Flip Barlow control in the
“down” position.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TELESCOPE FEATURES
1!
1@
3)
1)
j
i
2)
g
h
1#
f
e
1%
1. Eyepiece
2. Eyepiece holder thumbscrew
3. 45° Erecting Prism
4. Rear Cell Port
5. 90° Eyepiece holder
6. Eyepiece
b c
7. Eyepiece holder thumbscrew
8. Fork arms
9. Optical tube
10. Objective lens cell
11. Dew shield
d
1(
12. Dust cap
13. Vertical lock
14. Horizontal lock
15. Focus knob
16. Computer control panel
A. HBX port
1$
1^
B. LED
C. On/Off
D. AUX port
17. Base housing
18. Base/Holes for tripod bolts
19. Battery compartment
20. Flip mirror control (inset)
1*
1&
Fig. 1: The ETX-80AT-BB Telescope.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Ꭽ Ꭾ ൳
Ꭿ
1^
Fig. 1b : The computer control panel:
A - HBX port; B - LED; C - On/Off;
D - AUX port.
2!
Fig. 2: The AutoStar
Handbox (see page 10).
1(
2(
Fig. 1c: The battery compartment.
2@
2#
2$
2%
2^
21. AutoStar
22. Tripod bubble level
23. Base
24. Handle
25. Adjustable legs
26. Locking ring
27. Leg braces/accessory holders
28. Leg locks
29. Bubble level/compass
30. Flip Barlow
2& 2*
Fig. 3: The tripod.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ETX:Your Personal Window to the Universe
The Meade ETX-80AT-BB is an extremely versatile, high-resolution telescope with features sim-
ilar to those once available only with larger and more specialized imaging systems. With push-
button controls, automatic tracking of celestial objects, and software downloading capability, an
ETX telescope may be all the telescope ever required by many terrestrial and astronomical
observers.
Your ETX telescope reveals nature in an ever-expanding level of detail. Observe the feather
structure of an eagle from 50 yards or study the rings of the planet Saturn from a distance of
800 million miles. Focus beyond the Solar System and observe majestic nebulae, ancient star
clusters, remote galaxies, and even stars recently discovered to have planets orbiting about
them. Meade ETX telescopes are instruments fully capable of growing with your interest and
are ideal for both the casual observer and serious astronomer alike.
Caution:
Using products other
than standard Meade
accessories may cause
damage to the
telescope’s internal
electronics and may
void the Meade
b Eyepiece: Place the MA 25mm or other eyepiece into the 45° Eyepiece Holder (3, Fig. 1) and
tighten in place with thumbscrew (2, Fig.1).
warranty.
c Eyepiece Holder Thumbscrew: Secures the eyepiece. Tighten to a "firm feel" only.
d 45° Erecting Prism: Holds the eyepiece at angle for convenient viewing and correctly
orients images in the eyepiece.
E Rear Cell Port: Attach any 35mm camera with a removable lens to this port using an
optional #64ST T-Adapter or attach the 45° prism (3, Fig. 1) for correctly oriented images
through the eyepiece.
F 90° Eyepiece Holder: Holds the eyepiece upright for easy viewing.
G Eyepiece: Place the MA 25mm or other eyepiece into the 90° Eyepiece Holder (5, Fig. 1) and
tighten in place with thumbscrew (7, Fig.1).
H Eyepiece Holder Thumbscrew: Secures the eyepiece. Tighten to a "firm feel" only.
I Fork Arms: Hold the optical tube in place.
J Optical Tube: The main optical component that gathers the light from distant objects and
brings this light to a focus at the eyepiece.
1) Movable Objective Lens Cell:This component contains the telescope’s lenses.The focus
knob (15, Fig. 1) moves the cell for precise image focus.
1! Dew Shield: Slows down the advance of dew, which distorts observing conditions.
1@ Dust Cap: Unthread the dust cap counterclockwise from the front lens of the telescope
before observing.
Note: The dust cap should be replaced after each observing session and the
power turned off to the telescope.Verify that any dew that might have collected dur-
ing the observing session has evaporated before you replace the dust cap.
1# Vertical Lock: Turning the vertical lock counterclockwise unlocks the telescope, enabling
it to be freely moved up and down. Turning the vertical lock clockwise (tighten to a "firm
feel" only) prevents the telescope from being moved manually, but allows the vertical motor
drive to operate for AutoStar operation.
Caution: When loosening the vertical lock, be sure to hold onto the optical tube
(9, Fig. 1). The weight of the objective lens could cause the tube to swing
suddenly downward and damage the telescope.
1$ Horizontal Lock: Controls the manual horizontal rotation of the telescope. Turning the
horizontal lock counterclockwise unlocks the telescope, allowing it to be freely rotated by
hand side-to-side about the horizontal axis. Turning the horizontal lock clockwise prevents
the telescope from being rotated manually, but allows the horizontal motor drive to operate
for AutoStar operation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1% Focus Knob: Moves the telescope’s objective lens (10, Fig. 1) in a finely-controlled motion
to focus an image. The ETX-80AT-BB telescope can be focused on objects from a distance
of about 17 ft. to infinity. Rotate the focus knob clockwise to focus on distant objects, and
counterclockwise to focus on nearby objects.
Note: The first time you focus the telescope, you may have to rotate the focus knob
20 to 40 complete turns as this is a fine focus mechanism which allows you to focus
an image very precisely.
1^ Computer Control Panel:
A. Handbox (HBX) Port: Plug the AutoStar coil cord (8, Fig. 5) into this port.
B. LED: The red power indicator light illuminates when power is supplied to
the AutoStar handbox and to the telescope’s motor drive.
C. ON/OFF Switch: Turns the Computer Control Panel and AutoStar ON or OFF.
D. Auxiliary (AUX) Port: Provides connection for current and future Meade acces-
sories, such as the Meade “AstroFinder Software with Cable Connector Kit,” which
allows you to control your ETX from a PC. See OPTIONAL ACCESSORIES, page 33.
1& Base Housing: Contains mechanical and electrical assemblies that operate the telescope.
1* Base/Bolt Hole for Tripod Bolts: Thread the tripod bolts up through the tripod
and into the two holes in the base.
1( Battery Compartment: Install batteries in this compartment. See Step #12, page 14 for
more information.
Fig. 4a: Flip mirror
control in the “up”
position.
2) Flip Mirror Control: ETX telescopes include an internal mirror. With the flip mirror control
in the “Up” position, light is diverted to the eyepiece in the 90° eyepiece holder
(5, Fig. 1). With the flip mirror control in the down position, light is diverted through the rear
cell port (4, Fig. 1) for use with the the 45° prism and eyepiece or to a camera for
photography. See Figs. 4a and 4b.
2! AutoStar with attached cord: See pages 10 to 12 for a description of AutoStar’s
features.
The Tripod
2@ Bubble Level: Use when aligning your telescope. When the bubble is in the center
circle, the base is level.
Fig. 4b: Flip mirror
control in the “down”
position.
2# Base: Attach the telescope to the base.
2$ Handle: Conveniently placed for lifting and moving the tripod.
2% Adjustable Tripod legs: Support the telescope. The height of the legs can be adjusted.
See 2* below.
2^ Locking Ring: To open the tripod, loosen the ring and push it down as far as it will go.
Tighten the ring to lock the tripod in an open position. To close tripod, loosen the ring and
begin to pull upward. Close the legs against the center post (be careful not to close on your
fingers). Tighten ring to fasten legs in the closed position.
2& Leg Braces/Accessory holders: Strengthens the legs when the tripod is in the open posi-
tion. Also, you can place eyepieces and other accessories in the holes on the tray.
2* Leg Locks: Lift the lever to move the inner tripod leg segment in or out when adjusting the
height of the tripod.
2( Bubble Level: Helps you level the tripod and to find North during the alignment procedure.
3) Flip Barlow: Flip the switch to engage the Barlow. The Barlow doubles the magnification
of your eyepiece.You may have to turn the focus knob several times to refocus. See page
15 for more information.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOSTAR FEATURES
b
c
d
e
f
g
i
h
Fig. 5: #494 AutoStar Handbox.
Tour the Cosmos with Just the Push of a Button
Control of the ETX-80AT-BB is through the operation of the standard-equipment #494 AutoStar.
Nearly all functions of the telescope are accomplished with just a few pushes of AutoStar’s but-
tons. Some of the major features of AutoStar are:
•
Automatically move the telescope to any of the 1400 objects stored in the database or
manually enter the astronomical coordinates of any celestial object.
•
•
Take a guided tour of the best celestial objects to view on any given night of the year.
Download the latest satellite data and software revisions directly from the Meade website
al #506 AstroFinder™ Software and Cable Connector Kit. See OPTIONAL ACCESSORIES
page 33.)
•
•
•
Access a glossary of astronomical terms.
Calculate which eyepiece to use for optimum viewing of a celestial object.
Mount the telescope in the “Alt/Az” mode (Altitude - Azimuth, or vertical - horizontal) for
fully automatic tracking of celestial objects.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The AutoStar Computer Controller provides control of virtually every telescope function within
a compact handbox. AutoStar has soft-touch keys designed to have a positive feel. The LCD
(Liquid Crystal Display) is backlit with a red LED (Light Emitting Diode) for easy viewing in the
dark. The backlit display, key arrangement, and sequential database make AutoStar extremely
user friendly.
Note: AutoStar does not require batteries; the telescope’s batteries supply power
to AutoStar.
b 2-Line LCD Display: Provides a visual interface between AutoStar and the telescope.
•
•
Top line: Displays a menu item, or a menu option.
Bottom line: Displays a menu option or information about a subject.
c ENTER Key: Accesses the AutoStar menus. See MOVING THROUGH AUTOSTAR'S MENUS,
page 17 and AUTOSTAR’S MENUS, page 21. The ENTER key is similar to the Return key
on a computer.
Note: If ENTER is pressed for two seconds or more and then released, AutoStar
emits a beep and “ENTER to Sync” is displayed. "ENTER to Sync" is relevant only
after the telescope has been aligned and is pointing at an object. If the "ENTER to
Sync" feature is accessed by mistake, press MODE to return to the previous
screen. See HIGH PRECISION, page 28, for more details about this feature.
d MODE Key: Returns to the previous menu. If you keep pressing Mode, it will continue to
access previous menus until the top level, “Select Item," is reached. The MODE key is
similar to the ESCAPE key on a computer.
NOTE: If MODE is pressed and held for two seconds or more, the following infor-
mation is then available using the Scroll keys (6 , Fig. 5):
• Right Ascension and Declination (astronomical) coordinates (see APPENDIX A)
• Altitude (vertical) and Azimuth (horizontal) coordinates
• Local Time and Local Sidereal Time (LST)
• Timer and Alarm Status
Press MODE again to return to the previous menu.
NOTE:
Throughout this man-
ual, you will notice
the term "Alt/Az."
Alt/Az stands for alti-
tude-azimuth, which
is just a fancy way of
saying the telescope
moves up and down,
and from side to side.
Not all telescopes
move like this. Alt/Az
alignment is just one
of many methods
used by amateur
astronomers to help
locate stars in the
night sky.
e GOTO Key: Moves the telescope to the coordinates of the currently selected object.While
the telescope is moving (or “slewing”), the operation may be stopped at any time by press-
ing any key except GO TO. Pressing GO TO again resumes the slew to the object.
f Arrow Keys: Move the telescope up, down, left and right, at one of nine different speeds.
Speed selection is explained in SLEW SPEEDS, page 16. The following functions are avail-
able with the Arrow keys:
•
Alt/Az Alignment - Use the Up and Down Arrow keys to move the telescope ver-
tically up and down.The Left Arrow key rotates the telescope (horizontally) coun-
terclockwise, while the Right Arrow key rotates it clockwise.
•
Data Entry - Use the Up and Down Arrow keys to scroll through the letters of the
alphabet and numerical digits. The Down Arrow key starts with the letter "A" and
the Up Arrow key starts with the digit "9." The Left and Right Arrow keys are used
to move the blinking cursor left and right across the LCD display.
g Scroll Keys: Accesses menu options within a selected menu. The menu is displayed on
the first line of the screen. Options within the menu are displayed, one at a time, on the
second line. Press the Scroll keys to move through a list of options. Press and hold a Scroll
key to move quickly through the options.
The Scroll keys, like the Arrow keys, also scroll through the letters of the alphabet and
numerical digits.
NOTE: The Scroll Down key and the Down Arrow key move forward through the
alphabet & digits (A to Z, 0 to 9). The Scroll Up key and the Up Arrow key move
backward (Z to A, 9 to 0). Common symbols are also available in the list.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
H Speed/? Key: Pressing the Speed/? key cycles through the nine slew speeds that move
the telescope. Each time the Speed/? key is pressed briefly, the current slew speed is
shown for about two seconds on the display. See SLEW SPEEDS, page 16.
The Speed/? key also accesses the "Help" file. "Help" provides on-screen information on
how to accomplish whatever task is currently active.
NOTE: Pressing the Speed/? key very briefly changes the slew speed. Holding
down the Speed/? key longer (one to two seconds) accesses the Help function.
Hold down the Speed/? key and then follow the prompts on the display to access details
of AutoStar functions in the Help feature. The Help system is essentially an on-screen
instruction manual.
If you have a question about an AutoStar operation, e.g., INITIALIZATION, ALIGNMENT,
etc., hold down the Speed/? key and follow the directions that scroll on the second line of
the LCD screen. When a word appears in [brackets], press ENTER to access the AutoStar
Glossary. A definition or more detailed information is displayed. Press MODE to return to
the scrolling AutoStar Help display.
When satisfied with the Help provided, press MODE to return to the original screen and
continue with the chosen procedure.
I Coil Cord (not visible in diagram): Plug the AutoStar coil cord into the HBX port
(A, Fig. 1) of the computer control panel of the telescope.
FOR BEGINNERS
TIPS
Join an Astronomy Club
Attend a Star Party
One of the fun ways to learn about astronomy is to
join an astronomy club. Check your local newspa-
per, school, library, or telescope dealer/store to find
out if there’s a club in your area.
At club meetings, you will meet other astronomy
enthusiasts with whom you will be able to share
your discoveries. Clubs are an excellent way to
learn more about observing the sky, to find out
where the best observing sites are, and to compare
notes about telescopes, eyepieces, filters, tripods,
and so forth.
Often, club members are excellent astrophotogra-
phers. Not only will you be able to see examples of
their art, but you may even be able to pick up some
“tricks of the trade” to try out on your ETX tele-
scope. See page 31 for more information about
photography with the ETX.
Many groups also hold regularly scheduled Star
Parties at which you can check out and observe
with many different telescopes and other pieces of
astronomical equipment. Magazines such as Sky &
Telescope and Astronomy print schedules for many
popular Star Parties around the United States and
Canada.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Parts Listing
Getting the telescope ready for first observations requires only a few minutes. When first open-
ing the packing box, note carefully the following parts:
•
•
•
•
•
The ETX Astro Telescope with fork mount system, photographic type tripod.
Water-resistant backpack.
#494 AutoStar handbox with attached coil cord.
Meade premium eyepieces; 45° erecting prism.
Fig. 6a: Loosen the tripod’s
locking ring...
Hex-wrench, packed with the instruction manual. See GENERAL MAINTENANCE
page 34.
Telescope Assembly
Setup The Tripod
Your backpack observatory does not ship with the parts stowed in the backpack. Before stow-
ing the gear in the backpack and taking it out into the field, assemble the telescope in a famil-
iar environment to practice the setup.
1. Hold the tripod by its handle and turn the locking ring to loosen the tripod mechanism
(Fig. 6a). Push down on the locking ring as far as it will go to spread out the tripod legs
(Fig. 6b). Turn the locking ring to tighten the tripod in place.
Fig. 6b: ...push down as far
as it will go.
2. Adjust the height of the tripod, by lifting one of the tripod leg lock levers and sliding the
inner leg in or out to the desired length. Then press down on the lever to re-lock. Repeat
for the other two legs.
3. Use the tripod on a level and even ground. Pointing accuracy depends on the base of the
tripod being level with the horizon. The bubble level on top of the tripod can help deter-
mine if the base is level: Move the base until the bubble is in the center of the circle.
Attach the Telescope to the Base
4. Thread the supplied bolts about two or three turns through the underside of the tele-
scope base (Fig. 7).
Fig. 7: Thread bolts into
telescope base.
5. Line up the bolts over the key-like holes on the base of the tripod and slide the bolts into
the holes (Fig. 8). Rotate the telescope clockwise until the bolts fit into the hole bays.
Then, reach under the tripod base and tighten the bolts to a firm feel.
6. The optical tube is shipped with the tube upright between the forks. Loosen the vertical
lock (Fig. 9) and move the optical tube down between the fork arms. Then, re-tighten the
vertical lock.
7. Remove the inverted dewshield from the end of the telescope. Remove the dust cap from
the end of the telescope by rotating it counterclockwise. Then thread the dewshield over
the end of the telescope.
8: Remove the eyepiece cap from the 90 degree eyepiece holder and also the cap from the
rear cell port. Screw on the 45 degree prism to the rear cell port.
Fig. 8: Line up bolts over
keylike holes.
9. You can put two eyepieces into this telescope at the same time: Slip a lower power eye-
piece, such as a 25mm or 26 mm eyepiece into the 45 degree prism and another eye-
piece into the 90 degree holder. You can switch between the two eyepieces by turning
the flip mirror control to the up or down position.
Note: It is strongly recommended that you remove the 45 degree prism from the
telescope during the alignment procedure. The prism can correct the orientation of
land objects during the daytime, but is not necessarily needed for astronomical
viewing. You may use it, but during alignment the prism might strike the telescope
base and obstruct the align process.
Fig. 9: Loosen vertical lock
to move optical tube.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Secure the eyepieces in place with their respective thumbsrews.
Tip: Always start observing using a low power eyepiece to get a nice wide field of view.
Later on you can change to high power, if so desired. But high powered eyepieces have
a much narrower field of view and it’s more difficult to locate objects using high powered
eyepieces.
11. You can focus the eyepieces by turning the focus knob.
Tip: The focus knob has a very fine focus, so you may have to turn the knob 20 com-
plete turns or more to focus on an object.
Fig 10. Focus knob.
Connect the AutoStar Handbox
12. Lift the battery cover. Now gently remove the battery holder from the compartment so
you don’t accidentally pull out the wires attached to the holder. Insert 6 user supplied
“AA” batteries in the holder. Refer to the diagram on the holder to orient the batteries
properly. Replace the holder back into the battery compartment and replace the lid.
13. Make sure that the computer control panel power switch is in the OFF position. Remove
AutoStar from the packing materials and plug it into the HBX port.
Fig 11. Insert batteries.
14. Flip the Power Switch on the computer control panel to the ON position. The copyright
message lights on AutoStar’s LCD display.
15. Press the key prompted by AutoStar to accept the Sun warning.
Stowing your Gear in the Backpack
First disassemble the telescope assembly.
1. Loosen the vertical lock. Now move the tube to an upright position so that it is pointing
straight up through the fork arms and re-tighten the vertical lock.
2. Loosen the bolts on the underside of the tripod base, rotate the telescope counterclock-
wise, and lift the telescope off of the tripod. Now remove the bolts from the base.
3. Unscrew the dew shield. Thread the dust cover over the end of the telescope. Then flip
the dewshield over and place it over the end of the tube.
Fig 12. Plug AutoStar into the
HBX port of the computer
control panel.
4. Next, close and lock the tripod: Hold the tripod by its handle and turn the locking ring to
loosen the tripod mechanism.
5. Lift the locking ring as far as it will go. Turn the locking ring to tighten the tripod in place.
Caution: Be careful not to close the tripod legs on your fingers.
Fig 13. Thread the dust cover
onto the tube.
Now, place the accessories and telescope into the backpack.
6. Put the eyepiece container into the provided pouches in the accessory compartment with
the “lip” at the top.
7. Place the bolts, prism into their respective pouches. Zip up the accessory compartment.
8
Stow the ETX telescope in your backpack. Use the velcro tape inside of the backpack to
further secure it in place. Place the AutoStar handbox into the lower section of the pack.
9. Zip up the pack.
10. Slide the tripod under the loops on the pack so that the feet will face downward when
you carry the pack. Secure the tripod using the loop lock: Hold the knot with one hand
Fig 14. The dewshield.
and move the lock down toward the tripod with your other hand.
Safety Precautions
•
•
Take care not to allow the telescope to be jolted severely while hiking.
Try not to run for any significant distance. Don’t toss the telescope in the pack on the
ground. Excessive vibrations may damage the telescope.
•
The backpack is made of water-resistant material, but isn’t waterproof. Some areas, such
as the zipper seam might allow rain to penetrate and cause damage to the
telescope.
Fig 15. Secure the telescope
in the backpack using the
velcro strap.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing an Eyepiece
A telescope’s eyepiece magnifies the image formed by the telescope’s main optics. Each eye-
piece has a focal length, expressed in millimeters, or “mm.” The smaller the focal length, the
higher the magnification. For example, an eyepiece with a focal length of 9mm has a higher
magnification than an eyepiece with a focal length of 25mm.
Your telescope comes supplied with two standard eyepieces.
Low power eyepieces offer a wide field of view, bright, high-contrast images, and excellent eye
relief during long observing sessions. To find an object with a telescope, always start with a low
power eyepiece. When the object is located and centered in the eyepiece, you may wish to
switch to a higher power eyepiece to enlarge the image as much as practical for prevailing see-
ing conditions.
Note: Seeing conditions vary widely from night-to-night and site-to-site. Turbulence
in the air, even on an apparently clear night, can distort images. If an image
appears fuzzy and ill-defined, back off to a lower power eyepiece for a more well-
resolved image (Fig. 18a and 18b, page 18).
The power, or magnification of a telescope is determined by the focal length of the telescope
and the focal length of the eyepiece being used. To calculate eyepiece power, divide the tele-
scope's focal length by the eyepiece's focal length. E.g., Assume you are using a 25mm eye-
piece. The focal length of the ETX-80AT-BB is 400mm (see SPECIFICATIONS, page 36).
Telescope Focal Length ÷ Eyepiece Focal Length = Magnification
400mm ÷ 25mm = 16
The eyepiece power, or magnification is therefore 14x. However, your telescope also contains
a built-in 2 times Barlow. This means you also have to multiply magnification figure by two.
16 x 2 = 32
So your telescope has a 32 times magnification.
Manual Operation of the Telescope without AutoStar
If you wish to observe a distant land object, such as a mountain top or a bird, you can observe
by merely pointing the telescope and looking through the eyepiece. Assemble the telescope,
loosen the horizontal and vertical locks (13 and 14, Fig. 1), and turn the telescope towards the
object you wish to observe. Sight along the top of the tube until you find the object. When the
object appears in the eyepiece, focus the image using the by turning the focus knob (15, Fig.
1). Rotate the knob clockwise to focus on distant objects and counterclockwise to focus on
nearby objects.
You can also observe stars and objects in the night sky using this method, but note that objects
begin to slowly drift across the eyepiece field.This motion is caused by the rotation of the Earth.
As you become familiar with AutoStar operation, you can counteract the drift using the auto-
matic tracking feature in the Setup menu (see TO TRACK AN OBJECT AUTOMATICALLY, page
17), or by using AutoStar's GO TO capabilities (see GO TO SATURN, page 19).
Fig. 16: Sight along the top of the optical
tube.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Operation of the Telescope Using AutoStar's Arrow Keys
You may also observe land and astronomical objects using AutoStar's Arrow keys.
If you have not already done so, prepare your telescope following the steps described in
TELESCOPE ASSEMBLY, page 13. Next, flip the On/Off Switch (16C, Fig. 1b) on the computer
control panel to the ON position. The copyright message lights on AutoStar’s display. Press the
Speed/? key (7, Fig. 5) to accept the Sun warning. The "Getting Started" message displays.
Keep pressing the ENTER key until "Country/State" appears on the display. (Ignore the prompts
requesting "Date" and "Time" for now – these functions will be explained later in the manual).
Use the Scroll keys to cycle through the database of countries/states. Press ENTER when your
location displays. Next, use the Scroll keys to scroll to the nearest city to your observing site
and press ENTER. Next, use the Scroll keys to scroll to your telescope model and press
ENTER. The display then reads "Setup: Align."
You can now use the Arrow keys (5, Fig. 5) to slew (move) the telescope up, down, right, or left.
To change the telescope’s slew speed, briefly press the Speed/? key (7, Fig. 5). Each press
decreases the slew speed down one level, and then cycles back to the fastest speed. See page
16 for more information.
Fig. 17: AutoStar's Arrow
keys.
Tighten (to a "firm feel" only, do not overtighten) the vertical and horizontal locks (13 and 14,
Fig. 1). Sight along the side of the telescope’s main tube to locate an object and practice using
the AutoStar’s Arrow keys to center the object in the telescope’s field of view. Use the tele-
scope’s focus knob (15, Fig. 1) to bring the object into focus.
This procedure demonstrates just a very small part of AutoStar's capabilities. In the next section
of this manual, you will begin to learn how to make use of AutoStar's extensive and powerful fea-
tures.
Slew Speeds
AutoStar has nine slew speeds that are directly proportional to the sidereal rate (this is the
speed at which stars move) and have been calculated to accomplish specific functions.
Pressing the SPEED/? key changes the slew speed, which is then shown for about two
seconds on AutoStar’s display.
The nine available speeds are:
{
{
{
{
{
{
{
{
{
Speed 1
Speed 2
Speed 3
Speed 4
Speed 5
Speed 6
Speed 7
Speed 8
Speed 9
=
=
=
=
=
=
=
=
=
2x =
8x =
2 x sidereal (0.5 arc-min/sec or 0.008°/sec)
8 x sidereal (2 arc-min/sec or 0.033°/sec)
16 x sidereal (4 arc-min/sec or 0.067°/sec)
32 x sidereal (8 arc-min/sec or 0.13°/sec)
64 x sidereal (16 arc-min/sec or 0.27°/sec)
16x =
32x =
64x =
0.5° = 120 x sidereal (30 arc-min/sec or 0.5°/sec)
1°/s = 240 x sidereal (60 arc-min/sec or 1°/sec)
2°/s = 480 x sidereal (120 arc-min/sec or 2°/sec)
Max = (Maximum speed possible, dependent on battery power)
Speeds 1, 2, or 3: Best used for fine centering of an object in the field of view of a higher power
eyepiece, such as a 12mm or a 9mm eyepiece.
Speeds 4, 5, or 6: Enables centering an object in the field of a low-to-moderate power eye-
piece, such as a standard 25mm eyepiece.
Speeds 7 or 8: Best used for rough centering of an object in the eyepiece.
Speed 9: Moves the telescope quickly from one point in the sky to another.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Observe the Moon
Point your telescope at the Moon (note that the Moon is not visible every night) and practice
using the Arrow keys and the slew speeds to view different features. The Moon contains many
interesting features, including craters, mountain ranges, and fault lines. The best time to view
the Moon is during its crescent or half phase. Sunlight strikes the Moon at an angle during these
periods and adds a depth to the view. No shadows are seen during a full Moon, causing the
overly bright surface to appear flat and rather uninteresting.
Consider the use of a neutral density Moon filter when observing the Moon. Not only does it cut
down the Moon's bright glare, but it also enhances contrast, providing a more dramatic image.
To Track an Object Automatically
As the Earth rotates beneath the night sky, the stars appear to move from East to West. The
speed at which the stars move is called the sidereal rate.You can setup your telescope to move
at the sidereal rate so that it automatically "tracks" the stars and other objects in the night sky.
In other words, if the telescope is not tracking an astronomical object, the object will drift out of
the eyepiece field of view. The tracking function automatically keeps an object more or less cen-
tered in the telescope’s eyepiece.
To track objects, you must first initialize AutoStar and then select "Targets: Astronomical" from
the AutoStar Setup menu. You must also learn how the AutoStar keypad operates in order to
move through the AutoStar menus.
Moving Through AutoStar’s Menus
The AutoStar database is organized in levels for quick and easy navigation.
•
•
•
Press ENTER to go deeper into AutoStar's menu levels.
Press MODE to move back toward the top menu level.
Use the Scroll keys to move up and down through the options available for each
level.
•
Use the Scroll keys to enter characters and digits.
The Arrow keys are used to move the telescope, and can also enter numbers and letters.
Initializing AutoStar
This section describes how to initialize AutoStar. Perform this procedure the first time you use
AutoStar or after performing a RESET.
1. Secure the locks: Make sure that the vertical and horizontal locks (13 and 14, Fig. 1) are
secured.
2. Plug in AutoStar: Connect AutoStar to the HBX port of the computer control panel (16a,
Fig. 1B).
3. Turn on the control panel: Flip the telescope power switch of the computer control panel
to the ON position.
The AutoStar screen is activated and a copyright message displays briefly, followed by a
short beep. Then AutoStar takes a few moments to start up the system.
NOTE:
AutoStar requests the
Country/State, City,
and Telescope Model
information only the
first time AutoStar is
activated. If you wish
to change this informa-
tion, use the "Site" and
"Telescope Model"
options in the Setup
menu.
4. Sun Warning: A message displays that warns not to look at the Sun. At the end of this
message, press the Speed/? key to signify that the message has been read and |
understood.
5. Getting Started: The Getting Started menu displays a scrolling message. Press ENTER
(2, Fig. 5) to bypass the Help tutorial and continue with initialization.
6. Daylight Savings Time: The next screen requests the status of Daylight Savings Time.
Press one of the Scroll keys to toggle between the YES/NO settings. When the desired set-
ting displays, press ENTER.
Note: When multiple choices are available within a menu option, the option that is
currently enabled is usually displayed first and highlighted by a right pointing Arrow
(>).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
7. SetYour Location or Zip Code: The Location screen displays.This screen asks you if you
wish to choose either the zip code of your observing location or the location (i.e., entering
the city and state or country of your observing location). Press Up to select the zip code
option or down to enter the city and state.
Initialization is a pro-
cedure that ensures
that AutoStar oper-
ates correctly. When
you first use AutoStar,
it doesn't yet know
where the observa-
tion location site is,
what your model
number is (AutoStar
operates with several
different models of
Meade telescopes) or
if you are in a day-
light savings time
period.
Note: The location settings (country/state/province and city, or zip code) are only
asked for the first time you turn on the control panel. If you wish to change this set-
ting later on, use the Site menu. See SITE, page 28, for more information.
a. If you chose the zip code option, the leftmost “0” is highlighted. Use the Scroll keys to scroll
through the digits. When you reach the desired number, use the Right Arrow key to move
to the next digit position. Repeat this process until all 5 digits of your zip code are entered.
Press ENTER.
b. If you chose the location option, the next screen asks for the country or state/province (list-
ed alphabetically) of the observing site.
Use the Scroll keys to scroll through the list of countries, states, and provinces. Press
ENTER when the correct location displays.
The next screen asks for the city (listed alphabetically) closest to the observing site. Use
the Scroll keys to scroll through the list of cities. Press ENTER when the correct city
appears on screen.
During the procedure,
you are requested to
enter this information.
AutoStar uses this
information , plus
8. Select model number. As AutoStar operates with several different models of telescopes,
it next requests your telescope model number. Use the Scroll keys to cycle through the
models. Press ENTER when your model number displays.
9. System initialization is complete. The Easy Alignment feature begins automatically after
time and date infor-
mation it receives for
a high-precision inter-
nal clock to precisely
calculate the location
of celestial objects,
such as stars and
planets, and how to
move your telescope
correctly for various
operations.
the control panel is initialized.
FOR BEGINNERS
TIPS
Too Much Power?
Can you ever have too much power? If the type of
power you’re referring to is eyepiece magnification,
yes, you can! The most common mistake of the
beginning observer is to “overpower” his or her tele-
scope by using high magnifications which the tele-
scope’s aperture and atmospheric conditions can
not reasonably support. Keep in mind that a small-
er, but bright and well-resolved image is far superi-
or to one that is larger, but dim and poorly resolved
(see below). Powers above 110X should be
employed only under the steadiest atmospheric
conditions.
You will only be
asked for the location
and model number
information the first
time you initialize
AutoStar or after a
reset. You can
change this
information (for
AutoStar can calculate the best eyepiece for you to
use. Try out the “Eyepiece Calc” feature in the
Utilities menu.
example, you may
move more than 50
miles away) by going
to the Site and
Telescope model
options in the Setup
menu.
Most observers should have three or four additional
eyepieces to achieve the full range of reasonable
magnifications possible with the ETX telescopes.
See OPTIONAL ACCESSORIES, page 33.
Fig. 18a & b: Jupiter; example of too much magnification.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Alignment
Note:
After you initialize the system, AutoStar displays “Easy Align.” The fastest and easiest way to
start observing with AutoStar is with Easy Alignment.
The "Telescope: Mount"
option of the Setup
menu is set to "Alt/Az"
as the default alignment
by the factory.The
example presented in
this section assumes
that you are performing
an alignment procedure
for the first time with
your telescope and
therefore, the
During Easy Alignment, AutoStar automatically picks two alignment stars from its database of
celestial objects. It will then slew the telescope to a first alignment star. The user is asked to
verify that the telescope is pointed at the chosen star and then to center the star in the eye-
piece. The process is repeated with a second star to complete the alignment.
1. Select Alignment: “Align Easy” displays. Press ENTER.
2. Set Home Position: AutoStar then prompts you to set the telescope in the Alt/Az
Alignment home position (see margin note and Figs. 19 and 20). To set your telescope in
the "Alt/Az" home position:
•
•
Loosen the telescope’s vertical lock (13, Fig. 1).
Level the optical tube with the horizon. Move the optical tube until the pointer points at
“0” on the setting circle (Fig. 19).
"Telescope: Mount"
option does not need to
be selected.
•
•
Tighten the vertical lock to a "firm feel" only.
Unlock the horizontal lock (14, Fig. 1) and turn the telescope horizontally until it points
North. Re-lock the horizontal lock.
•
•
Remove the 45° prism and eyepiece from the rear cell port. It may interfere with the
alignment procedure. After alignment, you may replace the prism and eyepiece.
Press ENTER.
3. Center Alignment Stars: The AutoStar then slews to the first star for alignment. It may
not appear in the field of view in the eyepiece. The alignment star should be easily recog-
nized and be the brightest star in the area of the sky where the telescope is pointing. Use
the Arrow keys to move the telescope until the star is visible and centered in the eyepiece.
Press ENTER. Repeat procedure for the second alignment star.
North
Declination
at 0˚
Pointer
NOTE: AutoStar locates alignment stars based on the date, time, and location
entered. The alignment stars may change from night to night. All that is required is
for the observer to center the selected stars in the eyepiece when prompted.
Fig. 19: Alt/Az Alignment
Home Position.
Note: The GO TO key also allows you to perform a "spiral search." A spiral search is useful
when the telescope slews to an object, but that object is not visible in the eyepiece after the tele-
scope finishes it search. (This sometimes occurs during an alignment procedure.) Press GO TO
when the slew is finished and the telescope starts slewing in a spiral pattern at a very slow speed
around the search area. Look through the eyepiece and when the object does become visible,
press MODE to stop the spiral search.Then use the Arrow keys to center the object.
Go To Saturn
After performing the Easy Alignment procedure, the motor drive begins operating and the tele-
scope is aligned for a night of viewing. Objects in the eyepiece should maintain their position
even though the Earth is rotating beneath the stars.
Fig. 20: The ETX-80 is
supplied with a bubble
level. When setting the
home position, use the
bubble level to help level
the telescope and to find
North.
IMPORTANT NOTE: Once aligned, only use the GO TO or Arrow keys to move the
telescope. Do not loosen the telescope locks (13 and 14, Fig. 1), or move the base
manually, or alignment will be lost.
This exercise demonstrates how to select an object for viewing from AutoStar’s database. This
example demonstrates how to select Saturn.
Remove the eyepiece from
the 90° holder and drop in
the bubble level. Adjust the
telescope tube the bubble
enters the center circle of
the bubble level.
NOTE: Saturn is not visible the entire year and you may need to choose another
object from AutoStar's database; however, the procedure, as described below,
remains the same.
Line up the North - South
line of the compass with
you telescope tube. Move
the tube until the tube
points North.
1
After the telescope is aligned, “Select Item: Object” displays. Press ENTER.
2. “Object: Solar System” displays. Press ENTER.
3. “Solar System: Mercury” displays. Keep pressing the Scroll Down key until “Solar System:
Saturn” displays.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press ENTER. “Calculating” displays. Then “Saturn” and a set of coordinates displays.
Saturn’s (and other planets’) coordinates change throughout the year.
5. Press GO TO. “Saturn: Slewing...” displays and the telescope slews until it finds Saturn.You
may need to use the Arrow keys to center Saturn precisely in the eyepiece. AutoStar then
automatically slews (moves) the telescope so that it "tracks" Saturn (or whatever other
object you may have chosen); i.e., Saturn remains centered in the eyepiece. If an object is
observed in the telescope without using AutoStar's GO TO or automatic tracking capabili-
ties, objects in the eyepiece gradually drift out of the field of view due to the Earth's rota-
tion.
NOTE:
Keep in mind that
when viewing
through an eyepiece
in the 90°eyepiece
holder, images of
terrestrial objects
are right-side-up,
but reversed left-for-
right. Normally, such
an image orienta-
tion is not bother-
some, unless trying
to read a distant
sign, for example.
Using the Guided Tour
You’ve been hiking all day and night falls after you’ve set up camp. The only light is from the
stars, which seem so close that you feel you can reach out and touch them. You’ve gotten
your friends all excited about looking through your scope during the hike.
You initialize Autostar, set the home position and get aligned. You find Jupiter in the Solar
System menu and you show off Jupiter’s four moons and you talk about the detail you can
see in the bands circling the giant planet.
Next, you choose Saturn from the Solar system menu and — Autostar displays “Below hori-
zon.” So you quickly pick out Mars from the menu. It’s also below the horizon. Your friends are
losing interest.
If you wish to use
the telescope for
terrestrial observa-
tion, use the eye-
piece in the 45°
prism. The image in
this eyepiece will be
correctly
This is the perfect time to use Autostar’s “Guided Tour.”
Guided Tour is one of Autostar’s more fun features. For example, check out the tour called
“Tonight’s Best.” “Tonight’s Best” will take you on a tour of the best objects in the sky. Objects
that are in the sky right now—the tour changes all the time depending on the time, date and
place.
oriented.
1. To find the Guided Tour menu, keep pressing MODE until “Select Item: Object” displays.
2. Press one of the Scroll keys to page through the menus. Keep pressing until “Select
Item: Guided Tour” displays.
3. Press ENTER. “Guided Tour: Tonight’s Best” displays. Press ENTER.
4. “Tonight’s Best: Searching...” displays. After calculating, “Tonight’s Best: Jupiter” might
displays—different objects may be displayed on a tour list on any given night.
5. Press ENTER to display information about an object. Even though you may have just
looked at Jupiter, read the information screens (use the scroll keys to page through these
screens). You may discover some
cool information you didn’t know
about Jupiter.
FOR BEGINNERS
TIPS
6. Press MODE to return to the Tour
Which One’s the Alignment
list of objects. Press one of the
Star?
Scroll keys to scroll through the list.
Press ENTER when you find the
next object you wish to observe;
press ENTER to select the object.
Then press GO TO to move the tel-
escope to that object. Repeat this
procedure to find other objects.
If AutoStar has chosen an alignment star with which
you are unfamiliar, how can you be sure if the star
in your eyepiece is really the alignment star?
The rule of thumb is that an alignment star is usual-
ly the brightest star in that area of the sky.When you
view an alignment star in an eyepiece, it stands out
dramatically from the rest of the stars in that portion
of the sky.
7. Press and hold down MODE for two
seconds to leave the Guided Tour
menu.
If you have an obstruction, such as a tree or a build-
ing blocking your view of the alignment star, or if you
have any doubts at all about the star that has been
chosen, no problem. Just press the Scroll Down key
and AutoStar will find another star to align upon.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOSTAR MENUS
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOSTAR OPERATION
OBJECT
Select from over 1400 database objects and
press GO TO to move the telescope automatically to the
object and place it in the telescopic field of view.
SETUP
Select Item:
Object
Quick, easy alignment
permits all telescope
operations with only
a 2-minute setup.
Select Item:
Setup
Select Item:
Event
EVENT
UTILITIES
Access the time of
Calculate eyepiece
an astronomical
event, such as the
rising or setting
magnifications; set the
timer for an observing
session; or survey user
landmarks in 30-second
The Universe of
Autostar
times of the Moon.
intervals.
Select Item:
Select Item:
Utilities
Guided Tour
GUIDED TOUR
Journey through the
universe as Autostar
escorts you to the
best celestial objects
at your location.
GLOSSARY
Discover the world of astronomy
by alphabetically accessing
astronomical terms.
Select Item:
Glossary
Fig. 22: The AutoStar Universe: The six primary categories listed in the Select Item menu of AutoStar.
It is important to understand that menu selections are set in a loop (Fig. 23). This means that
pressing the Scroll Down key (6, Fig. 5) cycles down through all the available options within a
given category, then returns to the first option. The Scroll Up key (6, Fig. 5) cycles up through the
options in the opposite order. Note that this capability is a quick way to get to an option that is
near the bottom of the list. The following example demonstrates this capability.
Object
Event
Guided Tours
Glossary
Utilities
Setup
Example:
To navigate to the “Select Item: Setup” menu option when the “Select Item: Object” menu is displayed:
Fig. 23: Menus set in a
loop.
1. Press the Scroll Down key four times or the Scroll Up key once.
The screen in Fig. 24 displays two lines of information. The top line shows the current menu
level. The second line displays an option which may be selected within that menu level. Some
options are choices that select the next menu level down. The Scroll keys move up and down
within the list of available options, showing one option at a time.
Select Item
Object
c
Solar System
When the desired option is displayed on the second line, press the ENTER key to choose that
option and move down one menu level.
Fig. 24: AutoStar menu
levels.
Press the MODE key to leave a level; e.g., the wrong menu option is chosen.
IMPORTANT NOTE: No matter how many levels into AutoStar are traveled, each
press of the MODE key moves up a level, until the top level, "Select Item," is
reached. Once in the Select Item level, press MODE to return to the topmost level,
"Select Item: Object."
AutoStar Navigation Exercise
To demonstrate how the AutoStar menu structure works, the following exercise calculates
Sunset time so an evening observing session can be planned.
NOTE: To perform an accurate calculation, AutoStar must be properly initialized
with the current date, time, and location of the observing site. To enter the current
date, time, and location information of your observing site, see INITIALIZING
AUTOSTAR, page 17, before proceeding with this exercise.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
To Calculate Sunset time:
1. Press the MODE key several times, until “Select Item: Object” is displayed.
2. Press the Scroll Down key once to display the “Event” option in the “Select Item” menu.
3. Press the ENTER key to choose the "Event" option and move down a level. "Event:
Sunrise" is displayed.
4. Press the Scroll Down key once to display the "Sunset" option in the Event menu.
5. Press the ENTER key to choose the "Sunset" option and move down another level.
6. Autostar calculates the Sunset time based on the current date, time, and location. Autostar
then displays the results of the calculation.
7. Press MODE once to start moving back up through the Autostar levels. The first level up is
the Event menu.
8. Press MODE again to move up another level. This is the top level, "Select Item."
9. Press MODE again to return to the starting point of "Select Item: Object."
Entering Numbers and Text into Autostar
To enter numbers and text:
TIP: When multiple
choices are avail-
able within a menu
option, the option
that is currently
selected is usually
displayed first and
highlighted by a
right pointing arrow
(>).
{
Use the Up and Down Arrow keys to scroll through numbers 0 - 9 and the alphabet. The
Down Arrow key begins with the letter "A;" the Up Arrow key begins with digit "9."
To move the cursor across the display:
{
Use the Right or Left Arrow key (5, Fig. 5) to move the cursor from one number to the next
in the display
{
Press ENTER when the desired information has been entered.
Navigating Autostar
Autostar's menus are organized for quick and easy navigation:
{
{
{
{
Press ENTER to go deeper into Autostar's menu levels.
Press MODE (3, Fig. 5) to move back toward the top menu level.
Press the Scroll keys to move up and down through the options or lists
Press the Arrow keys to move the cursor across the display.
{
Press the Help (?) key to access on-line help.
Adjusting the Speed of a Scrolling Message
{
Press and hold the Scroll Up key to increase the scrolling speed when a message is scroll-
ing across the display.
{
Press and hold the Scroll Down key to decrease the scrolling speed when a message is
scrolling across the display.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Object Menu
Almost all observing with Autostar is performed using the Object menu category. (NOTE:
Exceptions include Guided Tour and Landmark Survey. See GO TO SATURN, page 19, for an
)
example of observing using the Object menu. Also see TAKE A GUIDED TOUR, page 20.
Many Autostar menu categories contain databases. An Autostar database is a list of viewable
objects, such as stars, planets, comets, nebulae, and so forth. When one of these objects is
selected from a database, Autostar moves your telescope (if properly aligned) and points it at
the selected object.
The Object Menu options include:
Solar System is a database of the eight planets (Earth is not included) in order out from the
Sun, followed by the Moon, asteroids, and comets.
Constellation is a database of all 88 Northern and Southern Hemisphere constellations. When
this menu option is chosen and a constellation name appears on the first line of the screen,
press GO TO once to change the second line to the name of the brightest star in the constel-
lation. Press GO TO a second time to slew the telescope to that star. Use the Scroll keys to
cycle through the list of stars in the constellation, from brightest to dimmest.
Deep Sky is a database of objects outside our Solar System such as nebulae, star clusters,
galaxies, and quasars.
Star is a database of stars listed in different categories such as named, double, variable, or
nearby.
Satellite is a database of Earth-orbiting objects such as the International Space Station, the
Hubble Space Telescope, Global Positioning System (GPS) satellites, and geosynchronous
orbit satellites.
User Objects allows the user to define and store in memory deep-sky objects of specific inter-
est that are not currently in the Autostar database. See "Appendix B" for more information.
Landmarks stores the location of terrestrial points of interest in the permanent Autostar data-
base.
IMPORTANT NOTE: To use the Landmark function, the telescope must be located
and aligned exactly as when the landmark was added to the database.
{
Select: To select a Landmark already in the database (see ADD below), choose the
"Select" option and scroll through the list. Press ENTER to select a Landmark, then press
GO TO and the telescope slews to the object.
{
Add:To add a Landmark, choose the "Add" option. Enter a name for the Landmark. Locate
and center the Landmark in the eyepiece, then press ENTER.
Identify is an exciting feature for an observer who wants to scan the night sky and start explor-
ing. After the telescope has been properly aligned, use the Autostar Arrow keys to move about
in the sky. Then follow this procedure:
IMPORTANT NOTE: Only use the Arrow keys to move the telescope during the
Identify procedure. Do not loosen the telescope locks or move the base or align-
ment is lost.
1. When a desired object is visible in the eyepiece, keep pressing MODE until the “Select
Item: Object” menu is displayed. Press ENTER to select this menu.
2. Scroll through the Object menu options until the “Object: Identify” screen appears.
3. Press ENTER. Autostar searches the database for the identity of the object being
observed.
4. If the telescope is not directly on an Autostar database object, the nearest database object
is located and displayed on the screen. Press GO TO and the telescope slews to that
object.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Event Menu
The Event menu provides access to dates and times of astronomical events. The Event data-
base includes:
Sunrise and Sunset calculates the time that the Sun rises or sets on the current date. Find
rise and set times for other dates by entering a new date into the “Setup: Date” menu. See
DATE, page 27.
Moonrise and Moonset calculates the time that the Moon rises or sets on the current date.
Find rise and set times for other dates by entering a new date into the “Setup: Date” menu. See
DATE, page 27.
Moon Phases displays the date and time of the next Full, New, 1st Quarter, and 3rd Quarter
Moon.
Meteor Showers provides information on upcoming meteor showers, such as the Perseids, the
Leonids, etc. Also lists the dates of the showers and when they reach maximum.
NOTE: Meteor showers cover large areas of the sky and are usually best observed
with the naked eye.
Solar Eclipse lists upcoming Solar Eclipses, including the date and type (total, annular, or par-
tial) of eclipse, and the location and time of the first and last contacts of the Moon's shadow.
Use the Scroll Up and Down keys to display the available data. Remember, never use a tele-
scope to look at the Sun! See “WARNING!” to the left.
Lunar Eclipse lists upcoming Lunar Eclipses, including the date and type (total, partial,
penumbral) of eclipse. Use the Scroll Up and Down keys to display the available data.
Autumn and Vernal Equinox calculates the time and date of the fall or spring equinox of the
current year.
Winter and Summer Solstice calcu-
lates the time and date of the winter or
summer solstice of the current year.
FOR BEGINNERS
TIPS
•
•
•
Try to pick an observing site away from street
and house lights and car headlights. While this
is not always possible, the darker the site, the
better.
Glossary Menu
The Glossary menu provides an alpha-
betical listing of definitions and descrip-
tions for common astronomical terms
and Autostar functions. Access directly
through the Glossary menu or through
hypertext words embedded in Autostar.
A hypertext word is any word in [brack-
ets], usually found when using the
Autostar Help function or when reading a
scrolling message such as a description
of a planet or star. Press ENTER when-
ever a hypertext word is on screen and
Autostar goes to the glossary entry for
that word.
Give your eyes about ten minutes to adjust to
the darkness before observing. Give your eyes
a rest from observing every ten or fifteen min-
utes to relieve eyestrain.
Try not to use a standard flashlight. A lot of
observers use red LED flashlights or tape red
cellophane over their flashlights to use for
setup and map reading so they don’t have to
continually readjust their eyes to the darkness.
Be careful not to shine bright lights if there are
other observers in the area. Do not shine a
flashlight into the telescope while someone is
observing!
•
•
Dress warmly. It gets chilly when you’re sitting
for prolonged periods.
To access directly from the Glossary
menu, use the Scroll keys to scroll
through the alphabet. Press ENTER on
the desired letter. Scroll to the desired
entry and then press ENTER to read the
description.
Practice setting up your equipment during the
day or in a lighted area to become familiar with
it before going to a dark site.
•
Use your 25mm eyepiece to view terrestrial
objects and wider areas of space, such as
open star clusters. Use your 9mm eyepiece
when you wish to view something up close,
such as craters on the Moon or the rings of
Saturn.
Utilities Menu
The Utilities menu provides access to
several extra features within Autostar,
including a countdown timer and an
alarm. The Utilities functions include:
•
Know your observing site. If you’re going to try
out an unfamiliar site, check it out in the daylight
for possible obstructions and pitfalls.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer selects a countdown timer. This feature is useful for functions such as astrophotography
and tracking satellites. See OBSERVING SATELLITES, page 30. To use the Timer, press ENTER,
then choose “Set” or “Start/Stop."
{
{
Set: Enter the time to be counted down, in hours, minutes, and seconds, then press ENTER.
Start/Stop: Activates the timer set previously. Use the Scroll keys to toggle between ON and
OFF.When ON is displayed, press ENTER to activate the timer.When the timer runs out, four
beeps sound and the timer is deactivated.
Alarm selects a time for an alarm signal as a reminder. To use the Alarm, press ENTER, then
choose "Set" or "Start/Stop."
{
{
Set: Enter the time of day for the alarm to sound, in hours, minutes, and seconds, then press
ENTER.
Start/Stop: Activates the alarm set previously. Use the Scroll keys to toggle between ON
and OFF. When ON is displayed, press ENTER to activate the alarm. When the alarm time
arrives, Autostar beeps. Press ENTER to deactivate the alarm.
Eyepiece Calc calculates information about an eyepiece for the specific telescope to which
Autostar is connected.
{
{
{
Field of View: Scroll through a list of available eyepieces. When an eyepiece is selected,
the field of view is calculated.
Magnification: Scroll through a list of available eyepieces. When an eyepiece is selected, the
magnification is calculated.
Suggest: Autostar calculates and suggests the best eyepiece for viewing, based on the tel-
escope and the object being viewed.
Display Options enables or disables Autostar’s two initial displays. If both displays are dis-
abled, Autostar begins with the Date display.
{
Sun Warning: Turns the “Sun Warning” message on or off.
{
Getting Started: Turns the “Getting Started” message on or off.
Brightness Adj: Adjusts the brightness of the display using the Scroll keys. When complete, press
ENTER.
Contrast Adj: Adjusts the contrast of the display using the Scroll keys. When complete, press
ENTER.
NOTE: This feature is usually only required in very cold weather.
Beep: Turns the beep on or off.
Sleep Scope is a power saving option that shuts down Autostar and the telescope without for-
getting its alignment. With "Sleep Scope" selected, press ENTER to activate the Sleep function.
Autostar goes dark, but the internal clock keeps running. Press any key, except ENTER, to re-
activate Autostar and the telescope.
Park Scope is designed for a telescope that is not moved between observing sessions. Align
the telescope one time, then use this function to park the telescope. Next time it is powered up,
enter the correct date and time – no alignment is required. Pressing ENTER causes the tele-
scope to move to its pre-determined Park position. Once parked, the screen prompts to turn off
power.
IMPORTANT NOTE: When the "Park Scope" option is chosen and the display
prompts you to turn off the telescope's power, Autostar is unable to be returned to
operation without turning the power off and then back on.
Cord Wrap, when set to "On," moves the telescope in such a way as to prevent the cords and
cables attached to your telescope assembly from getting wound around the assembly and tan-
gled as the telescope slews to objects. "Off" is the default setting.
Setup Menu
The Setup menu’s primary function is to align the telescope (see EASY ALIGN, page 19).
However, there are numerous other features available within the Setup menu, including:
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Date changes the date used by Autostar. This function is useful to check events in the past or
future. For example, set the Date menu for a day three months in the future. Then check the
"Select Item: Event" menu for the Sunset time on that date. See EVENT MENU, page 25.
Time changes the time entered into Autostar. Setting the correct time is critical for Autostar to
properly calculate locations and events. Time may be set to 24-hour mode (military time) by
selecting the "blank" option which follows the "AM" and "PM" options.
Daylight Saving is used to enable or disable Daylight Savings time.
NOTE: Daylight Savings Time may be referred to by different names in various areas
of the world. Check local time to verify.
Telescope accesses the several options, including:
{
{
{
Model: Allows you to select the telescope model connected to Autostar.
Focal Length: Displays the focal length of the selected telescope.
Az Ratio and Alt Ratio: The Az (Azimuth) ratio and Alt (Altitude) ratio refers to the gears
of the telescope's motors. Do not alter these numbers.
{
Az Percent:The Az (Azimuth) Percent allows you to change the azimuth backlash, i.e., the
way the Arrow keys move the telescope along the azimuth (horizontal) axis. If you enter a
value near 100, the telescope tube responds more quickly (it responds immediately at
100%) as you hold down an Arrow key and also slews (moves) the tube more quickly. If
you enter a value near 0, it takes longer for the tube to respond as you hold down an Arrow
key and also slews the tube more slowly. Experiment with this option.Try changing the per-
cent value until you get a "feel" for the Arrow keys that is comfortable for you.
Alt Percent: The Alt (Altitude) Percent operates identical to the AZ Percent option (see
above), but allows you to change the altitude backlash, i.e., the way the Arrow keys move
the telescope when moving along the altitude (vertical) axis.
{
Train Drive: Trains the Altitude and
Azimuth motors to locate objects
FOR BEGINNERS
TIPS
with more precision.
Surf the Web
If you are experiencing any problems
with pointing accuracy, follow the
procedure described in APPENDIX C:
TRAINING THE DRIVE, page 40, to
insure accurate pointing and track-
ing.
One of the most exciting resources for astronomy is
the internet.The internet is full of websites with new
images, discoveries, and the latest astronomical
information. For example, when comet Hale-Bopp
made its approach to our Sun in 1998, astronomers
around the world posted new photos daily.
You can find websites for almost any topic relating
to astronomy on the internet. Try the following key
word searches: NASA, Hubble, HST, astronomy,
Messier, satellite, nebula, black hole, variable stars,
etc.
{
Tracking Rate: Changes the speed
at which the telescope tracks targets
in the sky.
a. Sidereal: The default setting for
Autostar; sidereal rate is the
standard rate at which stars
move from East to West across
the sky due to the rotation of the
Earth.
b. Lunar: Choose this option to
properly track the Moon over
long observing sessions.
Check out Meade’s website for the latest product
and technical information. You can download the
latest software revisions, links to other astronomical
sites, coordinates of celestial objects and the latest
satellite tracking information for your #494 AutoStar
handbox. See page 30 for more information. You’ll
find our website at:
c. Custom: Allows entry of user-
Here are some other sites you might find interesting:
defined tracking rates.
• Sky & Telescope:
{
{
Reverse L/R: Reverses the func-
tions of the Left and Right Arrow
keys (i.e., the Right key moves the
telescope to the left).
• Astronomy:
• The Starfield:
• Astronomy Picture of the Day:
• Heaven’s Above (satellite observing information):
Reverse UP/DOWN: Reverses the
functions of the Up and Down Arrow
keys (i.e., the Up key moves the tele-
scope down).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
{
{
Quiet Slew: Sets the maximum slew rate to 1.5° for quieter operation.
Max Elevation: Allows you to enter a value in degrees that sets a limit as to how far the
optical tube can swing upward during a programmed slew. (Note that it does not prevent
you from performing a manual slew past this limit.) This is useful when you have a camera
or other peripheral attached to the telescope—you can prevent it from striking the tele-
scope base.
{
Min AOS (Acquisition of Signal): Allows you enter a value in degrees. This value repre-
sents the altitude at which your telescope begins to slew when acquiring a satellite track.
This is useful when you are observing satellites, but a tall tree or building is obstructing the
telescope. For example, you might begin to track the satellite at 15° altitude, instead of 5°.
See OBSERVING SATELLITES, page 30, for more information about satellites.
{
{
Calibrate Motor: If the telescope motors appear to have a problem, use this option to
retest the motors before performing a Reset. This option is also used if an Autostar unit is
moved between telescopes, to match Autostar to the new telescope. To calibrate the
motors, select this option and press ENTER.
High Precision: If High Precision is turned on, when looking for a faint celestial object (i.e.,
a nebula or galaxy), Autostar first slews to a nearby bright star and displays "ENTER to
Sync." Center the star in the eyepiece, then press ENTER. At that point the telescope has
a high precision alignment to that part of the sky and it then slews to the object that was
originally requested.
IMPORTANT NOTE:
While performing the
automatic tracking
procedure, only use
the Arrow keys to
move the telescope.
Once the telescope
has been set in the
Alt/Az home position,
do not loosen the
telescope locks (13
and 14, Fig. 1), or
move the base
Targets switches between Astronomical targets and Terrestrial targets. If "Astronomical" is
selected, the telescope tracking motor is activated and any object you observe will remain cen-
tered in the eyepiece. If "Terrestrial" is selected, the tracking motor is turned off. To learn how
to track an object automatically, see page 17.
Site provides access to several options including:
{
Select: Displays the currently selected observing site. Use the Scroll keys to cycle through
all available sites (see ADD below). Press ENTER when the site you wish to select displays.
Use this option when you move to a different geographic location.
{
Add: Allows you to add new observing sites to the database (up to six sites may be stored).
Scroll through the list of Countries/States. Press ENTER when the site you wish to add dis-
plays. Then choose the desired city in the same manner.
manually, or alignment
will be lost.
{
{
Delete: Deletes a stored site from the database.
Time Zone
Atlantic
Eastern
Central
Mountain
Pacific
Shift
Edit: Edits a selected site, including: the name, latitude, longitude, and time zone. Time
Zone refers to the Greenwich Mean Time (GMT) time zone shift. Users West of Greenwich,
England use “-” hours, East of Greenwich use “+” hours. For the United States, look up the
time zone shift in Table 1.
-4 Hours
-5 Hours
-6 Hours
-7 Hours
-8 Hours
-10 Hours
NOTE: Autostar compensates for daylight savings time, if selected. See SETUP
MENU: DAYLIGHT SAVING, page 27.
Hawaii
{
Address: Use the Up and Down Arrow keys to enter your street address, city, state, and
zip code. Press ENTER when the entry is complete.
Table 1: Time Zone Shift.
Download transfers information from a personal computer or another Autostar. During the
operation, the warning “Downloading Do Not Turn Off” appears.
NOTE:
NOTE: The Download function requires the optional #506 Astrofinder Software and
Cable Connector Kit. See the instruction sheet included with the kit for more infor-
mation on how to download. Also see OPTIONAL ACCESSORIES, page 33.
The Download function
requires the optional
#506 Astrofinder
Software and Cable
Connector Kit. See the
instruction sheet
included with the kit for
more information on
how to download.
Also see OPTIONAL
ACCESSORIES, page
33.
Statistics provides basic statistical data about Autostar, including:
{
{
Characters Free: Shows how much room is available in user-defined object memory.
Version: Shows the current version of the Autostar software.
Reset completely resets Autostar. Most values entered into the menus revert to factory
defaults. Autostar requires initialization again after a Reset before proceeding with observa-
tions. See INITIALIZING AUTOSTAR, page 17.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FEATURES
Terrestrial Observing
The ETX-80AT-BB makes an excellent high-resolution, terrestrial (land) telescope. Viewing ter-
restrial objects requires looking along the Earth's surface through heat waves. These heat
waves often cause degradation of image quality. Low power eyepieces, like the MA 25mm eye-
piece, magnify these heat waves less than higher power eyepieces. Therefore, low power eye-
pieces provide a steadier, higher quality image. If the image is fuzzy or ill-defined, reduce to a
lower power eyepiece, where the heat waves do not have such an effect on image quality.
Observing in early morning hours, before the ground has built up internal heat, produces bet-
ter viewing conditions than during late afternoon hours.
Astronomical Observing
Used as an astronomical instrument, your telescope has many optical and electromechanical
capabilities. It is in astronomical applications where the high level of optical performance is
readily visible. The range of observable astronomical objects is, with minor qualification, limit-
ed only by the observer’s motivation.
Sidereal Rate
As the Earth rotates beneath the night sky, the stars appear to move from East to West. The
speed at which the stars move is called the sidereal rate.
If the telescope is aligned, the motor drive is designed to rotate the telescope at the sidereal
rate so that it automatically tracks the stars. This tracking makes it easy to locate objects and
keep them centered in the telescope’s eyepiece.
Alignment (Mount)
The telescope's mount permits the movement of the telescope in both Altitude (vertically) and
Azimuth (horizontally). In order to automatically track a celestial object, the mount must be
properly aligned. Easy Alignment is described on page 19.
Alt/Az Alignment
One-Star Alt/AZ Alignment or Two-Star Alt/AZ Alignment allows you to choose the alignment
stars during the alignment procedure. The stars are chosen from AutoStar’s database of align-
ment stars. The database displays after One-Star Alt/Az or Two-Star Alt/Az Alignment is select-
ed. .
The term "Alt/Az." is frequently used to refer to the Altitude or horizontal and Azimuth or verti-
cal movements of the ETX-80AT-BB telescope. Other terms to describe a telescope's move-
ment may be used with telescopes that have mounts different from the ETX-80AT-BB.
Alt/Az Home Position
To set your telescope in the "Alt/Az" home position (also see Fig. 20, page 19).:
•
•
Loosen the telescope’s vertical lock (13, Fig. 1).
North
Level the optical tube with the horizon. Move the optical tube until the pointer points
at “0” on the setting circle.
•
•
Tighten the vertical lock to a "firm feel" only.
Unlock the horizontal lock (14, Fig. 1) and turn the telescope horizontally until it points
North. Re-lock the horizontal lock.
Declination
at 0˚
Pointer
•
•
Remove the 45° prism and eyepiece from the rear cell port. It may interfere with the
alignment procedure. After alignment, you may replace the prism and eyepiece.
Press ENTER.
Fig. 25: Alt/Az Home Position.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Two-Star Alt/Az Alignment
Two-Star Alignment requires some knowledge of the night sky. AutoStar provides a database of
bright stars and two stars from this database are chosen by the observer for alignment.
1. Perform steps 1 through 8 as described in the EASY ALIGNMENT PROCEDURE, page 19.
2 . Align to the first star. AutoStar then displays a database of stars for the observer to
choose from. Use the Scroll keys to scroll to a star that you wish to align upon. Select a
star that you can easily locate in the night sky.
3. Press ENTER. The telescope slews to the star for alignment. Use the Arrow keys to move
the telescope until the star is visible and centered in the eyepiece.
4. Press ENTER. Repeat procedure for the second alignment star. The telescope is aligned
and you are now ready to use AutoStar's GO TO capabilities for a night of observing.
One-Star Alt/Az Alignment
One-Star Alignment requires some knowledge of the night sky. AutoStar provides a database
of bright stars. One-Star Alignment is identical to Two-Star Alt/Az: Alignment (see TWO-STAR
ALT/AZ ALIGNMENT, above), except only one star from this database is chosen by the observ-
er for alignment.
IMPORTANT NOTE: The accuracy of One-Star Alt/Az Alignment, unlike the Two-
Star Alt/Az Alignment procedure, depends on how well the observer levels the tel-
escope and how close to North the telescope is pointed when setting the Home
Position (Fig. 24). Because Two-Star Alignment uses two stars to align upon, it is
more precise than One-Star Alignment.
Observing a Satellite
NOTE: Satellite observing is an exciting challenge. Most satellites are in low orbit,
traveling at approximately 17,500 mph. They move quickly across the sky and are
visible only for a few minutes, requiring AutoStar to slew the telescope rapidly. Best
viewing is near Sunrise or Sunset when the sky is still dark. Viewing in the middle
of the night can be problematic because the satellite may pass overhead, but not
be visible as it is in the Earth's shadow.
1. Choose a satellite from the Select menu, then press ENTER. AutoStar scans its database
to find if that satellite is expected to pass overhead within the next 6 hours.
2. If a satellite is expected, use the Scroll keys to access a list of information about the pass,
including acquisition time, location, etc.
3. At the end of the list is “Alarm.” Press ENTER and AutoStar automatically sets the alarm
to sound several minutes before the scheduled appearance. You may return to regular
observations until the alarm goes off.
4. When the alarm goes off, return to the Satellite menu and press a Scroll key until the
desired satellite is on the top line of the display.
5. Press GO TO. AutoStar slews the telescope to where the satellite should appear.The motor
drive stops and a countdown starts.
NOTE: If the scheduled appearance position of the satellite is obstructed (i.e., by a
building, tree, or hill), press ENTER and AutoStar starts to move the telescope
along the expected satellite track. When the track clears the obstruction, press
ENTER again to pause the telescope, then continue with this procedure.
6. With about 20 seconds left on the countdown timer, start watching through the eyepiece
for the satellite to enter the field of view.
7. When the satellite enters the field of view, press ENTER. The telescope starts to track with
the satellite.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Use the Arrow keys to center the object in the eyepiece to view the object. Satellite orbits
change and new satellites (including the Space Shuttle) are launched. Visit the Meade
instructions on how to download this data to AutoStar. If orbital parameters are more than
one month old, the satellite pass may not happen at the time predicted by AutoStar. To
download new satellite data into AutoStar memory requires the optional Astrofinder
Software and Cable Connector Kit. See OPTIONAL ACCESSORIES, page 33.
Digital Photography with the ETX
Although digital cameras still cannot match the quality of images provided by
traditional 35mm cameras, they provide some significant advantages to the casual astropho-
tographer: You do not have to develop the images (instant images), lower costs, computer and
internet readiness. And because unwanted photos are easily discarded, they provide the
freedom to experiment.
Digital cameras present some problems for the astrophotographer: Many models have lenses
that cannot be removed, present difficulties in attaching to a telescope, often lack manual focus-
ing and allow limited exposure times. Long exposures with digital cameras introduce undesir-
able noise and artifacts into a digital image. This limits the range of astro images to the Moon,
planets and bright stars.
SLR digital cameras usually work the best for astrophotography, although they are still a bit
pricey.
Some tips for better photos:
•
•
If you cannot remove the lens to your camera, look for a commercially available digital
t-adapter. New solutions for attaching a digital camera to a telescope are becoming
available as time goes by.
If the camera is not directly coupled to the eyepiece, keep it as close to the
eyepiece as possible and center the image to be photographed to minimize vignetting
(darkening of the edges of the photo).
•
•
Try to block ambient light (from street lights, house, etc.) from the eyepiece and the cam-
era with a piece of cardboard, a screen, etc.
Keep extra (charged) batteries on hand for your camera as digital cameras often drain bat-
teries in a short period of time. Rechargeable Lithium batteries provide power for a longer
period than non-rechargeable batteries. If practical, use an AC adapter.
•
•
If using manual focus, set to infinity. Otherwise, using the camera's autofocus is OK.
Experiment with your camera's exposure, brightness and /or contrast settings. Keep notes
for future reference.
•
•
Many digital cameras have a manual ISO setting. Short exposures times work the best.
Use your camera's highest image quality and lowest compression settings. Although this
fills up your camera's memory more quickly, it produces the best quality photos.
•
Use the camera's timer or remote shutter release (if available for your camera) to minimize
vibration.Wireless shutter releases may be available for some model digital cameras. If you
do not have a shutter release, use the camera’s timer (sometimes called “self-timer”), which
is available with most digital cameras. The timer also minimizes vibration.
Photography with Meade’s AutoStar Suite™
The AutoStar Suite with Meade LPI™ (Lunar Planetary Imager) or Meade Deep Sky Imager™
turns your Meade ETX telescope, AutoStar and PC into even more powerful and easy-to-use
astronomical 5. Press GO TO. AutoStar slews the telescope to where the satellite should
appear. The motor drive stops and a countdown starts.
NOTE: If the scheduled appearance position of the satellite is obstructed (i.e., by a
building, tree, or hill), press ENTER and AutoStar starts to move the telescope
along the expected satellite track. When the track clears the obstruction, press
ENTER again to pause the telescope, then continue with this procedure.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
6. With about 20 seconds left on the countdown timer, start watching through the eyepiece for the
satellite to enter the field of view.
7. When the satellite enters the field of view, press ENTER.The telescope starts to track with the satel-
lite. instrument.
LPI (Fig. 26) and Deep Sky Imager (Fig. 27) combine the power of an electronic
astronomical imager with the simplicity of a web cam. Check out the following imager features:
• LPI: Achieve great results the first time out on the Moon, planets, brighter deep-sky objects and ter-
restrial targets.
• Deep Sky Imager: Capture dim and faint objects that are often invisible to the eye, that once could only
be captured by large observatories or expensive CCD equipment. For example, the Horsehead and
Reflection nebulas in Orion.
• Easy to use with real-time display of object on your PC screen. Just center, focus and shoot.
• Magic Eye software-assisted focusing.
• Automatic and manual exposure control from .001 to 15 seconds (up to 450x longer than web cams).
• Automatically takes multiple exposures.
The AutoStar Suite Software includes powerful tools to help you get the most from your Meade ETX
telescope:
• Sophisticated planetarium program with over 19 million objects.
• Select objects from the planetarium display and the telescope slews to those objects.
• Create time-lapse movies of objects, such as Jupiter
• Create your own Guided Tours.
• Advanced Image Processing Software including Unsharp Masking, Convolution Filtering and many
other features.
• Control all AutoStar functions from your PC.
• Talking Telescope software translates AutoStar text to synthesized speech through PC speaker.
• Includes a cable to connect your ETX model to your PC.
Fig. 27: The Deep Sky Imager.
Fig. 26: The Lunar Planetary Imager.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL ACCESSORIES
A wide assortment of professional Meade accessories are available for the ETX-80AT-BB.
Meade accessories greatly extend many important applications to the telescope, from low-
power, wide-field terrestrial viewing to high-power lunar and planetary observing. The premium
quality of these accessories is well-suited to the quality of the instrument itself.
Meade telescopes and accessories, including optional accessories for ETX telescopes, are
available at more than 3,000 dealer locations in the U.S. and Canada and through Meade inter-
national distributors worldwide. Once you have identified the accessories you wish to order,
contact your local Meade authorized dealer. To find a dealer near you call (800) 626-3233 or
#506 AstroFinder™ Software and Cable Connector Kit: Displays more than 10,000 celes-
tial wonders – galaxies, nebulae, star clusters, stars, and planets – on your PC, enabling even
the beginner to locate and identify objects to observe with the telescope or to print out star
charts for use in observing sessions. Operates with any Windows™-based personal computer.
The Cable Connector Kit permits connection of the ETX-80AT-BB, AutoStar, and PC, for down-
loading of new software to AutoStar or for updating of Earth satellite or other celestial object
positions. This kit is included with each AstroFinder Software package.
Eyepieces (1.25" barrel diameter): For higher or lower magnifications, Meade 4-element
Series 4000 eyepieces yield wider fields of view with excellent edge-of-field corrections and
are available in a large range of focal lengths.
Fig. 28: Meade Series 4000 Super Plossl Eyepieces.
#126 2x Barlow Lens (1.25"): For telescopes that accommodate 1.25" eyepieces, the
Barlow lens doubles each eyepiece power while maintaining excellent image corrections.
#3200 Lunar & Planetary Color Filter Set: Meade optical glass color filters increase image
contrast and resolution of the Moon and planets. The #3200 Set includes light yellow, very light
red, very light blue, and neutral density filters. Each filter threads into the barrels of all Meade
MA, PL, and WA eyepieces and is packed in a separate plastic case for secure storage.
#827 8 x 25mm Right-Angle Viewfinder and Bracket: For easy sighting of terrestrial or astro-
nomical objects prior to their observation in the main telescope, the #827 8 x 25mm Right-Angle
Viewfinder (Fig. 30) displays a wide 7.5° field of view. Includes a crosshair eyepiece and precise
helicoid focusing; the included viewfinder bracket attaches to the main telescope in seconds.
64T-Adapter: The T-adapter allows you connect a 35mm camera to your ETX telescope. Obtain
the T-mount that is correct for your individual brand of camera separately.
Fig 29: #827 Right-Angle
Viewfinder.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND SERVICING
General Maintenance
The ETX-80AT-BB telescope is a precision optical instrument designed to yield a lifetime of
rewarding applications. Given the care and respect due any precision instrument, your tele-
scope will rarely require factory servicing or maintenance. Maintenance guidelines include:
1. Avoid cleaning the telescope’s optics. A little dust on the front surface of the telescope’s
correcting lens causes virtually no degradation of image quality and should not be con-
sidered reason to clean the lens.
2. When absolutely necessary, dust on the front lens should be removed with gentle strokes
of a camel hair brush or blown off with an ear syringe (available at any pharmacy). Do not
use a commercial photographic lens cleaner.
3. Organic materials (e.g., fingerprints) on the front lens may be removed with a solution of
3 parts distilled water to 1 part isopropyl alcohol. A single drop of biodegradable dish-
washing soap may be added per pint of solution. Use soft, white facial tissues and make
short, gentle strokes. Change tissues often.
CAUTION: Do not use scented, colored, or lotioned tissues as damage could result
to the optics.
4. If your telescope is used outdoors on a humid night, telescope surfaces may accumulate
water condensation. While such condensation does not normally cause any damage to the
telescope, it is recommended that the entire telescope be wiped down with a dry cloth
before being packed away. Do not, however, wipe any of the optical surfaces. Rather, sim-
ply allow the telescope to sit for some time in warm indoor air, so that the wet optical sur-
faces can dry unattended. In addition, the dust cap should not be placed back on to the
optical tube until the telescope is thoroughly dry.
5
If your telescope is not to be used for an extended period, perhaps for one month or more,
it is advisable to remove the six AA-size batteries from inside the drive base. Batteries left
installed for prolonged periods may leak, causing damage to the telescope’s electronic cir-
cuitry. See TELESCOPE ASSEMBLY, page 13.
6. Do not leave your telescope outdoors on a warm day or inside a sealed car for an extend-
ed period of time. Excessive ambient temperatures can damage the telescope’s internal
lubrication and electronic circuitry.
7. A (English-format) hex wrench is provided with the ETX-80AT-BB. Use the wrench to tight-
en the set-screws of any knobs which may loosen, such as the horizontal lock knob or
focus knob.
Storage and Transport
When not in use, store the telescope in a cool, dry place. Do not expose the instrument to
excessive heat or moisture. It is best to store the telescope in its original box with the vertical
and horizontal locks (13 and 14, Fig. 1) in the unlocked positions. If shipping the telescope, use
the original box and packing material to protect the telescope during shipment.
When transporting the telescope, take care not to bump or drop the instrument; this type of abuse
can damage the optical tube and/or the objective lens. It is highly recommended to use the
optional Hard Case to transport the telescope. See OPTIONAL ACCESSORIES, page 33.
Inspecting the Optics
A Note About the “Flashlight Test": If a flashlight or other high-intensity light source is point-
ed down the main telescope tube, the view (depending upon the observer’s line of sight and
the angle of the light) may reveal what appears to be scratches, dark or bright spots, or uneven
coatings, giving the appearance of poor quality optics.These effects are only seen when a high
intensity light is transmitted through the lens or reflected off the mirror, and can be seen on any
high quality optical system, including giant research telescopes.
The optical quality of a telescope cannot be judged by the “flashlight test"; the true test of opti-
cal quality can only be conducted through careful star testing.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The following suggestions may be helpful with operation of the ETX-80AT-BB.
The power indicator light on the telescope does not come on or there is no response
when pressing AutoStar Arrow keys:
•
•
•
Verify that the Computer Control Panel power switch (10c, Fig. 1) is in the ON position.
Verify that the AutoStar cord (8, Fig. 5) is firmly connected to the HBX port (10a, Fig. 1).
Verify that the batteries are installed correctly and that they have sufficient charge. See
TELESCOPE ASSEMBLY, page 13.
Note: If the batteries are getting low on charge, there will be a marked difference
in the slew speed. The speed indicator lights may also flash and the speed may
change. If any of these symptoms occur, turn the power off and replace the batter-
ies.
•
•
•
If AutoStar does not respond to commands, set the Computer Control Panel power switch
to OFF and then back to ON.
If the telescope does not slew after power is applied or if the motor quits or stalls, verify
that there are no physical obstructions that would impede telescope movement.
If all physical obstacles are removed and the telescope still does not move properly, turn
off the power and unplug AutoStar. Plug the AutoStar back in and turn the power back on.
Cannot seem to focus (No image appears in the eyepiece):
•
Keep turning the focus knob. Your ETX telescope has a fine focusing mechanism which
allows you to focus an image very precisely. However, this means that you may have to
rotate the focus knob 20 to 40 complete turns to achieve focus, particularly the first time
you use your telescope. After that, fewer turns will be needed.
Still unable to see an image through the eyepiece:
•
Confirm that the dust cap has been removed from the telescope.
•
Confirm that the flip-mirror control (20, Fig. 1) is in the “up” position (Fig. 4a) if using the
eyepiece holder (3, Fig. 1) so that light is directed to the eyepiece (1, Fig. 1). Confirm that
the flip-mirror control is in the “down” position (Fig. 4b) if using the #933 Erecting Prism.
Slew speed does not change when the Speed/? key is pressed, or the telescope moves
slowly even though the fast slew speed is chosen:
•
The battery power may be low. See TELESCOPE ASSEMBLY, page 13.
Images through the eyepiece appear unfocused or distorted:
•
•
The magnification used may be too high for the seeing conditions. Back off to a lower
power eyepiece. See TOO MUCH POWER?, page 18.
If inside a warm house or building, move outside. Interior air conditions may distort terres-
trial or celestial images, making it difficult, if not impossible, to obtain a sharp focus. For
optimal viewing, use the telescope outside in the open air instead of observing through an
open or closed window or screen.
•
•
If viewing a land object on a warm day, heat waves distort the image.
The optics within the telescope need time to adjust to the outside ambient temperature to
provide the sharpest image. To "cool down" the optics, set the telescope outside for 10 to
15 minutes before observing begins.
Telescope moves off a terrestrial object while observing:
•
Verify that the vertical and horizontal locks have been tightened to a "firm feel" (13 and 14,
Fig. 1).
Telescope pauses when changing slew direction:
This pause is normal.
A terrestrial object appears reversed left-for-right:
•
•
An eyepiece in the standard 90° observing position (5, Fig. 1) yields this image orienta-
tion. To view a correctly oriented image, the Erecting Prism (3, Fig. 1) is required.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Meade Customer Service
If you have a question concerning your ETX-80AT-BB, contact the Meade Instruments Customer
Service Department at:
Telephone: (800) 626-3233
Customer Service hours are 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday. In the
unlikely event that the ETX requires factory servicing or repairs, write or call the Meade Customer
Service Department first, before returning the telescope to the factory, giving full particulars as to
the nature of the problem, as well as your name, address, and daytime telephone number. The
great majority of servicing issues can be resolved by telephone, avoiding return of the telescope
to the factory.
ETX-80AT-BB Specifications
Optical design ................................................................Achromatic Refractor
Clear aperture ..........................................................80mm (2.76”)
Focal length....................................................................400mm
Focal ratio (photographic speed)....................................f/4.4
Near focus (approx.) ......................................................17 ft. (5.2m)
Resolving power ............................................................1.6 arc secs
Multi-coatings on objective lens ....................................Standard
Limiting visual stellar magnitude (approx.) ....................11.5
Image scale ....................................................................4.1°/inch
Maximum practical visual power ....................................240X
Optical tube dimensions
(dia. x length) ..........................................................9.3cm x 30.4-37.1cm (3.6” x 12-14.6”)
Eyepieces
2x Flip Barlow ................................................................Built in
Telescope mounting........................................................Fork type; double tine
Setting circle diameters ..........................................Dec: 3.5”; RA: 7”
Input voltage ..........................................................9-volts DC
Motor Drive System ................................................DC servo motors with encoders, both axes
Slow-Motion Controls ....................................................Electric, 9 speed, both axes
Hemispheres of operation ..............................................North and South, switchable
Bearings:
Altitude....................................................................Acetal
Azimuth ..................................................................Nylon
Materials
Tube body ..............................................................ABS
Mounting ................................................................High-impact ABS
Objective lens (crown, flint) ....................................BK7, F2
Telescope dimensions ....................................................40.4cm x 18cm x 22cm (15.9” x 7” x 9”)
Prism ..............................................................................45° roof
Tripod..............................................................................Photo style
Battery Life (approx.)
with AutoStar ..........................................................20 hrs.
Compass/Bubble Level included
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AutoStar Specifications
Processor ................................................................................68HC11, 8MHz
Flash Memory ................................................................512KB, reloadable
Keypad............................................................................10 key alphanumeric
Display ............................................................................2 line, 16 character LCD
Backlight ........................................................................Red LED
Coil Cord ........................................................................24"
AutoStar Dimensions
Length ............................................................................14.2cm (5.60")
Width (LCD end) ............................................................78.0cm (3.08")
Width (Connector end) ..................................................53.5cm (2.10")
Depth..............................................................................23.5cm (0.93")
AutoStar net weight ........................................................0.169kg (0.35 lbs.)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: USING AUTOSTAR TO ENTER R.A.
AND DEC COORDINATES
Although AutoStar's database contains more than 1400 objects (stars, nebulae, planets, etc.)
that you can observe, you may eventually want to view objects that are not part of the database.
AutoStar provides a feature that allows you to enter an object's R.A and Dec coordinates in the
"User: Objects" option of AutoStar's Object menu and then automatically slews the telescope to
the user-entered coordinates.
In order to use this menu option, you first need to look up the R.A and Dec coordinates of the
object or objects you wish to observe. Check out your local library, computer store or bookstore
for astronomy books, CD Roms, or magazines (such as Sky & Telescope or Astronomy), to find
coordinates of celestial objects.
The objects/coordinates you enter become part of your own permanent database, called "User
Objects." You may use this menu to view these object as often as you like, but the objects' coor-
dinates just need to be entered once.
To enter coordinates of an object into the "User: Objects" option of the Object menu:
1. Make sure AutoStar has been initialized (see INITIALIZING AUTOSTAR, page 17) and the
telescope has been aligned and set to the Alt/Az home alignment position (see EASY
ALIGNMENT, page 19).
2. After the telescope is aligned, "Select Item: Object" displays. (If necessary, use the Scroll
keys to scroll through the menus, as previously described, to find this option.) Press
ENTER.
3. "Object: Solar System" displays. Keep pressing the Scroll Up key until "Object: User Object"
displays and press ENTER.
4. "User Object: Select" displays. Press the Scroll Down key once. "User Object: Add" dis-
plays. Press ENTER.
5. "Name" displays on the top line and a blinking cursor on the second line. Use the Arrow
keys (as previously described) to enter the name of the object you wish to add to the data-
base. When you are finished, press ENTER.
6.
"Right Asc.: +00.00.0" displays. Use the Arrow keys to enter the digits for the Right
Ascension coordinate of your object. If necessary, use the Scroll Keys to change "+" to "-."
When you are finished, press ENTER.
7.
"Declination: +00°.00'" displays. Use the Arrow keys to enter the digits for the Declination
coordinate of your object. If necessary, use the Scroll Keys to change "+" to "-." When you
are finished, press ENTER.
8. AutoStar then prompts you to enter the Size of the object. This step is optional. Use the
Arrow keys to enter this information, if so desired, and press ENTER to go to the next dis-
play. If you do not wish to enter this information, simply press ENTER.
9. AutoStar then prompts you to enter the Magnitude of the object. This step is also optional.
Use the Arrow keys to enter this information, if so desired, and press ENTER to go to the
next display. "User Object: Add" displays again.
To GO TO a user-entered object:
1. With "User Object: Add" displayed, press the Scroll Up key once. "User Object: Select" dis-
plays. Press ENTER.
2. Use the Scroll keys (if necessary) to scroll to the desired object. Press ENTER.
3. The name of the object and the Right Ascension and Declination coordinates display.
4. Press GO TO and the telescope slews to the object.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B: HELPFUL CHARTS
Latitude Chart for Major Cities of the World
Latitudes of major cities around the world are listed below. To determine the latitude of an observing site not listed on
the chart, locate the city closest to your site. Then follow the procedure below:
Northern Hemisphere observers (N): If the site is over 70 miles (110 km) North of the listed city, add one degree for
every 70 miles. If the site is over 70 miles South of the listed city, subtract one degree per 70 miles.
Southern Hemisphere observers (S): If the site is over 70 miles North of the listed city, subtract one degree for every
70 miles. If the site is over 70 miles South of the listed city, add one degree per 70 miles.
UNITED STATES
City
Albuquerque
Anchorage
Atlanta
Boston
Chicago
Cleveland
Dallas
Denver
SOUTH AMERICA
City
Asuncion
State
New Mexico
Alaska
Georgia
Massachusetts
Illinois
Latitude
35° N
61° N
34° N
42° N
42° N
41° N
33° N
40° N
42° N
21° N
32° N
39° N
36° N
35° N
34° N
26° N
46° N
36° N
30° N
41° N
35° N
40° N
33° N
46° N
37° N
41° N
29° N
33° N
38° N
47° N
39° N
38° N
Country
Paraguay
Brazil
Latitude
25° S
24° S
Brasilia
Buenos Aires
Montevideo
Santiago
Argentina
Uruguay
Chile
35° S
35° S
34° S
Ohio
Texas
ASIA
City
Beijing
Seoul
Taipei
Tokyo
Victoria
Country
China
Latitude
40° N
Colorado
Michigan
Hawaii
Mississippi
Missouri
Nevada
Arkansas
California
Florida
Wisconsin
Tennessee
Louisiana
New York
Oklahoma
Pennsylvania
Arizona
Oregon
Virginia
Utah
Texas
California
California
Washington
District of Columbia
Kansas
Detroit
Honolulu
Jackson
South Korea
Taiwan
37° N
25° N
Kansas City
Las Vegas
Little Rock
Los Angeles
Miami
Milwaukee
Nashville
New Orleans
New York
Oklahoma City
Philadelphia
Phoenix
Japan
36° N
Hong Kong
23° N
AFRICA
City
Cairo
Cape Town
Rabat
Country
Egypt
Latitude
30° N
South Africa
Morocco
Tunisia
34° S
34° N
37° N
Tunis
Windhoek
Namibia
23° S
AUSTRALIA
City
Adelaide
Brisbane
Canberra
Alice Springs
Hobart
Perth
Sydney
Melbourne
State
South Australia
Queensland
New South Wales
Northern Territory
Tasmania
Western Australia
New South Wales
Victoria
Latitude
35° S
27° S
35° S
24° S
43° S
32° S
34° S
38° S
Portland
Richmond
Salt Lake City
San Antonio
San Diego
San Francisco
Seattle
Washington
Wichita
EUROPE
City
Country
Netherlands
Greece
Switzerland
Denmark
Ireland
Germany
Scotland
Finland
Portugal
England
Spain
Norway
France
Italy
Sweden
Austria
Latitude
52° N
38° N
47° N
56° N
53° N
50° N
56° N
60° N
39° N
51° N
40° N
60° N
49° N
42° N
59° N
48° N
Amsterdam
Athens
Bern
Copenhagen
Dublin
Frankfurt
Glasgow
Helsinki
Lisbon
London
Madrid
Oslo
Paris
Rome
Stockholm
Vienna
Warsaw
Poland
52° N
39
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX C:TRAINING THE DRIVE
Train the telescope motors using AutoStar. Perform this procedure after RESET or if you are experiencing any point-
ing accuracy problems. Figure 30 depicts the complete Drive Training procedure.
Note: Use a terrestrial object, such as a telephone pole or lamp post, to train the drive. Complete this exer-
cise once every 3 to 6 months to maintain the highest level of telescope pointing accuracy.
Verify that AUTOSTAR
Press > until it
1
2
FOR BEGINNERS
TIPS
12
INITIALIZATION is
complete.
is centered
Scope slews left.
Bring target back
to center using
Further Study....
Press MODE until
Select Item is displayed.
This manual gives only the briefest introduction to
astronomy. If you are interested in pursuing further
studies in astronomy, a few topics are suggested
below that are worth reading up on. Try looking up
some of these topics in AutoStar’s glossary.
the Right Arrow key.
Select Item
3
Object
Press < until it
is centered
13
Press the scroll
up key once.
Scope slews right.
Bring target back
to center using
Also included below is a small sampling of books,
magazines, and organizations that you might find
helpful.
Select Item
Setup
4
the Left Arrow key.
Topics
Access the Setup
menu.
Train Drive
Az.Train
14
1. How is a star born? How does a solar system
form?
Menu returns to
Az. training.
Setup
5
2. How is the distance to a star measured? What
is a light year?
Align
Multiple presses.
3. What is red shift and blue shift?
Train Drive
Alt.Train
Altitude
15
16
4. How are the craters on our Moon formed? How
old is the Moon and Earth? How old is the Sun?
Setup
6
(vertical)
training.
Telescope
5. What is a black hole? A quasar? A neutron star?
Access the
Telescope menu.
6. What are stars made of? Why are stars differ-
ent colors? What is a white dwarf? A red giant?
Drive Setup
For this op. . .
7. What is a nova? A supernova?
Reminder to
use terrestrial
target.
Telescope
Telescope Model
7
8. What are comets? Asteroids? Meteors? Meteor
showers? Where do they come from?
Multiple presses.
Center reference
object
9. What is a planetary nebula? A globular cluster?
17
10. What is the Big Bang? Is the universe expand-
ing or contracting, or does it always remain the
same?
Center target
using Arrow
keys.
Telescope
Train Drive
8
Choose the Train
Drive option.
Books
Press until it
is centered
18
1. The Guide to Amateur Astronomy by Jack
Newton and Philip Teece
Scope slews down.
Bring target back
to center using
Train Drive
Az.Train
Azimuth
9
2. The Sky: A User’s Guide by David Levy
the Up Arrow key.
3. Turn Left at Orion by Guy Consolmagno & Dan
Davis
(horizontal)
training.
Press until it
is centered
4. Astrophotography for the Amateur by Michael
Covington
19
Drive Setup
For this op. . .
10
Scope slews up.
Bring target back
to center using
Magazines
Reminder to
use terrestrial
target.
1. Sky & Telescope
Box 9111, Belmont, MA 02178
2. Astronomy
the Down Arrow key.
Center reference
object.
Train Drive
Az.Train
Multiple presses.
Box 1612, Waukesha, WI 53187
11
20
Organizations:
Center target
using Arrow
keys.
MODE
1. Astronomical League
Executive Secretary
5675 Real del Norte, Las Cruces, NM 88012
2. The Astronomical Society of the Pacific
390 Ashton Ave, San Francisco, CA 94112
3. The Planetary Society
Select Item
Object
21
65 North Catalina Ave, Pasadena, CA 91106
Figure 30: Training the Drive Procedure.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX D: BASIC ASTRONOMY
In the early 17th century, Italian Scientist Galileo, using a crude telescope considerably small-
er than the ETX-80AT-BB, turned it to look towards the sky instead of distant trees and moun-
tains. What he saw, and what he realized about what he saw, forever changed the way mankind
thought of the universe. Imagine what it must have been like being the first human to see moons
revolve around the planet Jupiter or to see the changing phases of Venus! Because of his
observations, Galileo correctly realized Earth's movement and position around the Sun, and in
doing so, gave birth to modern astronomy. Yet Galileo's telescope was so crude, he could not
clearly make out the rings of Saturn.
Galileo's discoveries laid the foundation for understanding the motion and nature of the plan-
ets, stars, and galaxies. Building on his foundation, Henrietta Leavitt determined how to meas-
ure the distance to stars; Edwin Hubble proposed a glimpse into the origin of the universe;
Albert Einstein unraveled the relationship of time and light. Almost daily, using sophisticated
successors to Galileo's crude telescope, such as the Hubble Space Telescope, more and more
mysteries of the universe are being solved and understood. We are living in a golden age of
astronomy.
Unlike other sciences, astronomy welcomes contributions from amateurs. Much of the knowl-
edge we have on subjects such as comets, meteor showers, variable stars, the Moon, and our
solar system comes from observations made by amateur astronomers. So as you look through
your Meade ETX telescope, keep in mind Galileo. To him, a telescope was not a mere machine
of glass and metal, but something far more - a window through which the beating heart of the
universe might be glimpsed, a fuse to set fire to mind and imagination.
AutoStar Glossary
Be sure to make use of AutoStar’s Glossary feature. The Glossary menu provides an alpha-
betical listing of definitions and descriptions of common astronomical terms. Access directly
through the Glossary menu or through hypertext words embedded in AutoStar. See GLOSSARY
MENU, page 25, for more information.
Objects in Space
Listed below are some of the many astronomical objects that can be seen with the ETX-80AT-
BB:
The Moon
The Moon is, on average, a distance of 239,000 miles (380,000km) from Earth and is best
observed during its crescent or half phase when Sunlight strikes the Moon’s surface at an
angle. It casts shadows and adds a sense of depth to the view (Fig. 31). No shadows are seen
during a full Moon, causing the overly bright Moon to appear flat and rather uninteresting
through the telescope. Be sure to use a neutral Moon filter when observing the Moon. Not only
does it protect your eyes from the bright glare of the Moon, but it also helps enhance contrast,
providing a more dramatic image.
Using the ETX-80AT-BB, brilliant detail can be observed on the Moon, including hundreds of
lunar craters and maria, described below.
Fig. 31: The Moon.
Note the deep shad-
ows in the craters.
Craters are round meteor impact sites covering most of the Moon’s surface. With no atmos-
phere on the Moon, no weather conditions exist, so the only erosive force is meteor strikes.
Under these conditions, lunar craters can last for millions of years.
Maria (plural for mare) are smooth, dark areas scattered across the lunar surface. These dark
areas are large ancient impact basins that were filled with lava from the interior of the Moon by
the depth and force of a meteor or comet impact.
Twelve Apollo astronauts left their bootprints on the Moon in the late 1960's and early 1970's.
However, no telescope on Earth is able to see these footprints or any other artifacts. In fact, the
smallest lunar features that may be seen with the largest telescope on Earth are about one-half
mile across.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Planets
Planets change positions in the sky as they orbit around the Sun. To locate the planets on a
given day or month, consult a monthly astronomy magazine, such as Sky and Telescope or
Astronomy. Listed below are the best planets for viewing through the ETX-80AT-BB.
Venus is about nine-tenths the diameter of Earth. As Venus orbits the Sun, observers can see
it go through phases (crescent, half, and full) much like those of the Moon. The disk of Venus
appears white as Sunlight is reflected off the thick cloud cover that completely obscures any
surface detail.
Mars is about half the diameter of Earth, and appears through the telescope as a tiny reddish-
orange disk. It may be possible to see a hint of white at one of the planet’s Polar ice caps.
Approximately every two years, when Mars is closest to Earth in its orbit, additional detail and
coloring on the planet's surface may be visible.
Fig. 32: Jupiter and
its four largest
moons. The moons
can be observed in
a different position
every night.
Jupiter is the largest planet in our solar system and is 11 times the diameter of Earth.The plan-
et appears as a disk with dark lines stretching across the surface. These lines are cloud bands
in the atmosphere. Four of Jupiter’s 16 moons (Io, Europa, Ganymede, and Callisto) can be
seen as “star-like” points of light when using even the lowest magnification (Fig. 32). These
moons orbit Jupiter so that the number of moons visible on any given night changes as they cir-
cle around the giant planet.
Saturn is nine times the diameter of Earth and appears as a small, round disk with rings
extending out from either side (Fig. 33). In 1610, Galileo, the first person to observe Saturn
through a telescope, did not understand that what he was seeing were rings. Instead, he
believed that Saturn had “ears.” Saturn’s rings are composed of billions of ice particles ranging
in size from a speck of dust to the size of a house. The major division in Saturn's rings, called
the Cassini Division, is occasionally visible through the ETX-80AT-BB. Titan, the largest of
Saturn’s 18 moons can also be seen as a bright, star-like object near the planet.
Fig. 33: Saturn has
the most extensive
ring structure in our
Solar System.
Deep-Sky Objects
Star charts can be used to locate constellations, individual stars and deep-sky objects.
Examples of various deep-sky objects are given below:
Stars are large gaseous objects that are self-illuminated by nuclear fusion in their core.
Because of their vast distances from our solar system, all stars appear as pinpoints of light, irre-
spective of the size of the telescope used.
Nebulae are vast interstellar clouds of gas and dust where stars are formed. Most impressive
of these is the Great Nebula in Orion (M42), a diffuse nebula that appears as a faint wispy gray
cloud. M42 is 1600 light years from Earth.
Fig. 34: The
Open Clusters are loose groupings of young stars, all recently formed from the same diffuse
nebula. The Pleiades is an open cluster 410 light years away (Fig. 34). Through the ETX-80AT-
BB, numerous stars are visible.
Pleiades is one of
the most beautiful
open clusters.
Constellations are large, imaginary patterns of stars believed by ancient civilizations to be the
celestial equivalent of objects, animals, people, or gods.These patterns are too large to be seen
through a telescope. To learn the constellations, start with an easy grouping of stars, such as
the Big Dipper in Ursa Major. Then, use a star chart to explore across the sky.
Galaxies are large assemblies of stars, nebulae, and star clusters that are bound by gravity.
The most common shape is spiral (such as our own Milky Way), but galaxies can also be ellip-
tical, or even irregular blobs. The Andromeda Galaxy (M31) is the closest spiral-type galaxy to
our own. This galaxy appears fuzzy and cigar-shaped. It is 2.2 million light years away in the
constellation Andromeda, located between the large “W” of Cassiopeia and the great square of
Pegasus.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
MEADE LIMITED WARRANTY
Every Meade telescope, spotting scope, and telescope accessory is warranted by Meade Instruments Corporation (“Meade”)
to be free of defects in materials and workmanship for a period of ONE YEAR from the date of original purchase in the U.S.A.
and Canada. Meade will repair or replace a product, or part thereof, found by Meade to be defective, provided the defective
part is returned to Meade, freight-prepaid, with proof of purchase. This warranty applies to the original purchaser only and is
non-transferable. Meade products purchased outside North America are not included in this warranty, but are covered under
separate warranties issued by Meade international distributors.
RGA Number Required: Prior to the return of any product or part, a Return Goods Authorization (RGA) number must be
obtained from Meade by writing, or calling (949) 451-1450. Each returned part or product must include a written statement
detailing the nature of the claimed defect, as well as the owner’s name, address, and phone number.
This warranty is not valid in cases where the product has been abused or mishandled, where unauthorized repairs have been
attempted or performed, or where depreciation of the product is due to normal wear-and-tear. Meade specifically disclaims
special, indirect, or consequential damages or lost profit which may result from a breach of this warranty. Any implied warranties
which cannot be disclaimed are hereby limited to a term of one year from the date of original retail purchase.
This warranty gives you specific rights. You may have other rights which vary from state to state.
Meade reserves the right to change product specifications or to discontinue products without notice.
This warranty supercedes all previous Meade product warranties.
Part no. 14-6881-00 06/00
(800) 626-3233
Download from Www.Somanuals.com. All Manuals Search And Download.
|