Integrated Amplifier
MA7000
Owner’s Manual
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You
Table of Contents
Your decision to own this McIntosh MA7000 Integrated
Amplifier ranks you at the very top among discriminating
music listeners. You now have “The Best.” The McIntosh
dedication to “Quality,” is assurance that you will receive
many years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Safety Instructions............................................................2
Thank You and Please Take a Moment.............................3
Technical Assistance and Customer Service....................3
Table of Contents ..............................................................3
General Information .........................................................3
Connector and Cable Information ....................................4
Introduction.......................................................................4
Performance Features .......................................................4
Dimensions .......................................................................5
Installation ........................................................................6
Please Take A Moment
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Connections:
Rear Panel Connections....................................................7
Connecting Components...................................................8
Connection Diagrams (Separate Sheet)..............Mc1A/1B
Connecting Loudspeakers ................................................9
Serial Number: __________________________________
Purchase Date: __________________________________
Dealer Name: ___________________________________
Remote Control:
Remote Control Push-buttons......................................... 10
How to Operate by Remote Control ............................... 11
Front Panel Features:
Front Panel Displays, Controls, Push-buttons and Jack . 12
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands that
may be part of your system. If you or your Dealer wish
additional help concerning a suspected problem, you can
receive technical assistance for all McIntosh products at:
Operation:
How to Operate the MA7000..................................... 13-14
Additional Information:
Technical Description ................................................ 15-17
Specifications.................................................................. 18
Packing Instruction.........................................................19
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-724-0549
General Information
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected to
the MA7000 Integrated Amplifier.
Customer Service
2. The Main AC Power going to the MA7000 and any
other McIntosh Component(s) should not be applied
until all the system components are connected together.
Failure to do so could result in malfunctioning of some
or all of the system’s normal operations. When the
MA7000 and other McIntosh Components are in their
Standby Power Off Mode, the Microprocessor’s Circuit-
ry inside each component is active and communication
is occurring between them.
If it is determined that your McIntosh product is in need of
repair, you can return it to your Dealer. You can also return
it to the McIntosh Laboratory Service Department. For
assistance on factory repair return procedure, contact the
McIntosh Service Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2007 © by McIntosh Laboratory, Inc.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector Information, Introduction and Performance Features
Connector and Cable Information
Performance Features
XLR Connectors
• Power Output with Patented Autoformer
Below is the Pin configuration for the XLR Balanced Input The MA7000 consists of a 250 watts per channel stereo
and Output Connectors on the MA7000. Refer to the dia-
gram for connection:
Power Amplifier with less than 0.005% distortion. The
McIntosh designed and manufactured Autoformer allows
connection of 2, 4 or 8 ohm Loudspeakers.
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
• Electronic Switching and Balanced Connections
The Preamplifier uses Logic Circuits controlling Electro-
magnetic Switches on all inputs and operating functions
for reliable, noiseless, distortion free switching. There are
two Balanced Inputs for connection of source components
and a Balanced Preamplifier Output for driving an external
Power Amplifier.
PIN 2
PIN 2
PIN 3
PIN 1
PIN 1
PIN 3
Power Control Connector
The MA7000 Power Control Output Jack sends Power On/
Off Signals when connected to other
Power
McIntosh Components. A 1/8 inch
Control
stereo mini phone plug is used for con-
N/C
nection to the Power Control Output
on the MA7000.
Ground
• Power Guard
The patented McIntosh Power Guard circuit prevents the
amplifier from being overdriven into clipping with its
harsh distorted sound that can also damage your valuable
loudspeakers.
Note: The Data and Power Control Connecting Cable is avail-
able from the McIntosh Parts Department:
Data and Power Control Cable Part No. 170-202
Six foot, shielded 2 conductor, with 1/8 inch stereo mini
phone plugs on each end.
• Sentry Monitor and Thermal Protection
McIntosh Sentry Monitor power output stage protection
circuits ensure the MA7000 will have a long and trouble
free operating life. Built-in thermal protection circuits
guard against overheating.
Data Port Connectors
The MA7000 Data Out Ports send Remote Control Signals
to McIntosh Source Components. A 1/8
Data
Signal
inch stereo mini phone plug is used for
connection.
• Illuminated Power Meters
N/C
Data
Ground
The Illuminated Power Output Watt Meters on the
MA7000 are peak responding, and indicate the power out-
put of the amplifier.
McIntosh Plug-In Jumper Connector
The MA7000 utilizes a phono style Plug-In Jumper to con-
nect the OUTPUT 1 (Preamplifier Output)
Jack to the PWR AMP (Power Amplifier
Input) Jack for each channel.
• Power Control and Remote Control
The Power Control Output connection provides convenient
Turn-On/Off of McIntosh Source Components. The Data
Ports together with the supplied Remote Control provides
control of McIntosh Source Components connected to the
MA7000.
Note: The Jumper Connector is available
from the McIntosh Parts Department:
McIntosh Jumper Connector Part No. 117-781
• Special Power Supply
Introduction
The large Power Transformer, multiple filter capacitors and
regulated Power Supply ensures stable noise free operation
even though the power line varies.
Now you can take advantage of traditional McIntosh stan-
dards of excellence in the MA7000 Integrated Amplifier.
The Power Amplifier section of the MA7000, with a power
output of 250 watts per channel, will drive a pair of quality
Loudspeakers to a high level of performance. The flex-
ible Preamplifier section provides connections for various
input sources and may also be used to drive an external
Power Amplifier. The MA7000 reproduction is sonically
transparent and absolutely accurate. The McIntosh Sound
is “The Sound of the Music Itself.”
• Fiber Optic Solid State Front Panel Illumination
The even Illumination of the Front Panel is accomplished
by the combination of custom designed Fiber Optic Light
Diffusers and extra long life Light Emitting Diodes
(LEDs). The glass Front Panel ensures the pristine beauty
of the MA7000 will be retained for many years.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Dimensions
The following dimensions can assist in determining the
best location for your MA7000. There is additional in-
formation on the next page pertaining to installing the
MA7000 into cabinets.
17-1/2"
44.45cm
Front View of the MA7000
8-13/16"
22.38cm
9-7/16"
23.97cm
16-13/16"
42.70cm
Rear View of the MA7000
11-1/2"
29.21cm
19-3/4"
50.17cm
2-1/4"
5.72cm
16-7/16"
41.75cm
Side View of the MA7000
8-1/4"
20.96cm
3/16"
0.48cm
1-1/4"
3.18cm
7/8"
2.22cm
12-3/4"
32.39cm
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
The MA7000 can be placed upright on a table or shelf,
standing on its four feet. It also can be custom installed in
a piece of furniture or cabinet of your choice. The four feet
may be removed from the bottom of the MA7000 when it
is custom installed as outlined below. The four feet togeth-
er with the mounting screws should be retained for pos-
Allow at least 6 inches (15.24cm) above the top, 2 inches
(5.08cm) below the bottom and 1 inch (2.54cm) on each
side of the Integrated Amplifier, so that airflow is not ob-
structed. Allow 20 inches (50.8cm) depth behind the front
panel. Allow 2-1/4 inch (5.72cm) in front of the mounting
panel for handle clearance. Be sure to cut out a ventilation
sible future use if the MA7000 is removed from the custom hole in the mounting shelf according to the dimensions in
installation and used free standing. The required panel
the drawing.
cutout, ventila-
tion cutout and
unit dimensions
are shown.
17-1/16"
43.34cm
Always pro-
vide adequate
ventilation for
your MA7000.
Cool opera-
tion ensures the
8-5/16"
21.11cm
MA7000 Front Panel
Custom Cabinet Cutout
longest possible
operating life for
any electronic
instrument. Do
not install the
MA7000 directly
above a heat
generating com-
ponent such as
a high powered
amplifier. If all
the components
are installed in
a single cabinet,
a quiet run-
6"
15.24cm
Cutout Opening
for
Custom Mounting
Cabinet
Front
Panel
Opening
for Ventilation
MA7000 Side View
in Custom Cabinet
ning ventilation
fan can be a
definite asset
in maintaining
all the system
components at
the coolest pos-
sible operating
temperature.
Cutout Opening for Ventilation
Chassis
Spacers
Support
Shelf
4-5/8"
11.75cm
9-1/2"
24.13cm
A custom cabi-
net installation
should provide
the following
minimum spac-
ing dimensions
for cool opera-
tion.
MA7000 Bottom View
in Custom Cabinet
16"
40.64cm
11-1/2"
29.21cm
Cutout
Opening
for
Ventilation
Note: Center the cutout Horizontally on the unit.
For purposes of clarity, the above
10"
25.4cm
illustration is not drawn to scale.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Connections
Connect the MA7000 EXT SENSOR con-
GND
terminal
accepts
a ground
wire from a
turntable
JUMPER PLUGS
connect the Pream-
plifier OUTPUT 1
Jacks to the PWR
AMP IN Jacks
OUTPUT 2 sends balanced
signals to a separate exter-
nal Power Amplifier with
balanced inputs
power cord to a live
AC outlet. Refer to
information on the
back panel of your
MA7000 to determine
the correct voltage for
your unit
nector permits the
connection of a Mc-
Intosh IR Sensor for
remote operation
and are needed for
normal operation
POWER CON-
RIGHT OUTPUT
LEFT OUTPUT
CD1 and DVD Bal-
TROL MAIN Out-
put sends a turn-on
signal to a McIn-
tosh Component
when the MA7000
is turned On
connections for a
2, 4 or 8 ohm
loudspeaker
connections for a
2, 4 or 8 ohm
loudspeaker
anced and Unbalanced
INPUTS accept high
level program source
signals
Main Fuse holder,
POWER CONTROL
PHONO accepts
PWR AMP
input accepts
signals from
the internal
Preamplifier
or a separate
external Pre-
amplifier
RECord
refer to information
on the back panel
of your MA7000 to
determine the cor-
rect fuse size and
rating
1 and 2 Output sends
a turn-on signal to a
McIntosh Component
when the Outputs 1
and 2 Push-buttons
are used
signals from a
Moving Magnet
phono cartridge
OUTPUT
sends signals
to the input
of a recording
device
POWER CONTROL ACC
Output sends a turn-On,
turn-Off signal to a McIn-
tosh Component when using
the MA7000 Remote Control
ACC On/Off Push-buttons
DATA PORTS send
CD2, SERVER,
OUTPUT 1 sends
signals to the internal
Power Amplifier or
a separate external
Power Amplifier
signals to McIntosh
Source Components
to allow control with
the MA7000 Remote
Control
REC and TUNER
INPUTS accept high
level program source
signals
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Components
Sensor Connections:
The MA7000 has the ability to automatically switch power
On/Off to McIntosh Source Components via the Power
Control connections. The Data Port Connections allow for
the remote operation of basic functions using the MA7000
Remote Control. With an external sensor connected to the
MA7000, remote control operation of the system is possi-
ble from another room and/or when the MA7000 is located
in a cabinet with the doors closed.
12. Connect a RG59U or RG6U Cable from the MA7000
EXT SENSOR “F” Connector to the McIntosh Sensor
“F” Connector.
Audio Connections:
13. Connect an Audio Cable from the MA7000 TUNER
INPUT Jacks to the McIntosh TUNER 1 Fixed Output
Jacks.
14. Connect Balanced Cables from the MA7000 CD
INPUT Jacks to the McIntosh SACD/CD Player Fixed
Balanced Output Jacks.
The connection instructions below, together with the
MA7000 Input and Output Connection Diagrams located
on the separate folded sheet “Mc1A/1B”, are an example of
a typical audio system. Your system may vary from this,
however the actual components would be connected in a
similar manner. For additional information refer to “Con-
nector and Cable Information” on page 4.
Note: Unbalanced Audio Cables may be used instead of
the Balanced Cables, but not both.
15. Connect an Audio Cable from the MA7000 SERVER
INPUT Jacks to the McIntosh Music Server Output
Jacks.
Power Control Connections:
16. Connect an Audio Cable from the MA7000 REC OUT-
PUT Jacks to the McIntosh Music Server Input 1 Jacks.
17. Connect Balanced Cables from the MA7000 DVD
INPUT Jacks to the McIntosh Audio/Video Player Bal-
anced Output Jacks.
1. Connect a Control Cable from the MA7000 POWER
CONTROL MAIN Jack to the Power Control In on the
McIntosh SACD/CD Player.
2. Connect a Control Cable from the McIntosh SACD/CD
Player Power Control Out Jack to the McIntosh Audio/
Video Player Power Control In Jack.
3. Connect a Control Cable from the McIntosh Audio/
Video Player Power Control Out Jack to the McIntosh
Tuner Power Control In Jack.
4. Connect a Control Cable from the McIntosh Tuner
Power Control Out Jack to the McIntosh Music Server
Power Control In Jack.
5. Optionally connect a Control Cable from the MA7000
POWER CONTROL OUTPUT 2 Jack to the McIntosh
Power Amplifier (Secondary Room) Power Control In
Jack.
6. Connect any additional McIntosh Components in a
similar manner, as outlined in steps 1 thru 4.
Data Control Connections:
7. Connect a Control Cable from the MA7000 TUNER
DATA PORTS Jack to the McIntosh TUNER1 Data In
Jack.
Note: Unbalanced Audio Cables may be used instead of
the Balanced Cables, but not both.
18. Connect the Audio Cables coming from the Turntable
to the MA7000 PHONO INPUT Jacks.
19. Optionally, connect Balanced Cables from the MA7000
OUTPUT 2 Jacks to the McIntosh Power Amplifier
(Secondary) Input Jacks.
20. Connect any additional McIntosh Components in a
similar manner, as outlined in steps 14 thru 18.
Ground Connections:
21. Connect the Ground Cable coming from the Turntable
to the MA7000 GND Binding Post.
AC Power Cords Connections:
22. Connect the MA7000 and any remaining components’
AC Power Cords to a live AC outlet as illustrated.
8. Connect a Control Cable from the MA7000 CD DATA
PORT Jack to the McIntosh SACD/CD Player Data In
Jack.
9. Connect a Control Cable from the MA7000 SERVER
DATA PORT Jack to the McIntosh Music Server Data
In Jack.
10. Connect a Control Cable from the MA7000 DVD
DATA PORT Jack to the McIntosh Audio/Video Player
Data In Jack.
11. Connect any additional McIntosh Components in a
similar manner, as outlined in steps 7 thru 10.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect
Connecting Loudspeakers
Caution: The supplied AC Power Cord should not be
connected to the Rear Panel of the MA7000
Amplifier until after the Loudspeaker Connec-
tions have been made. Failure to observe this
could result in Electric Shock. For additional
instruction on making Loudspeaker Connec-
tions contact your McIntosh Dealer or McIn-
tosh Technical Support.
Figure 4
Figure 5
Figure 6
out. Refer to figures 4, 5 & 6.
Banana plug connection:
When connecting Loudspeakers to the MA7000 it is very
important to use cables of adequate size, so there is little to
no power loss in the cables. The size is specified in Gauge
Numbers or AWG (American Wire Gauge). The smaller
the Gauge number, the larger the wire size:
If your loudspeaker cables are 50 feet (38.1m) or less,
use at least 14 Gauge.
Insert the banana plug into the hole at the top of the
termi-
nal.
Refer
to fig-
ures
A and
B.
If your loudspeaker cables are 100 feet (76.2m) or less,
use at least 12 Gauge.
1. This McIntosh MA7000 Integrated Amplifier is de-
signed for the connection of a single Loudspeaker per
amplifier channel, with an impedance of 2 ohms, 4
ohms or 8 ohms.
Note: Banana Plugs are for use in the United States
and Canada only.
When making Loudspeaker Connections to the MA7000
refer to Connection Diagram located on the separate folded
sheet “Mc1B”. This an example of a typical audio system,
your system may vary from this, however the actual Loud-
speakers would be connected in a similar manner.
3. Connect the Loudspeaker hookup cables from a single
Loudspeaker to the output terminals that match the im-
pedance of the Loudspeaker, being careful to observe
the correct polarities. Output impedance connections
of 2 ohms, 4 ohms and 8 ohms are provided. If the
Loudspeaker’s impedance is in-between the available
connections, use the nearest lower impedance connec-
tion.
Note: The remaining Loudspeaker Terminals on the
Amplifier should not be connected to another
Loudspeaker.
2. Prepare the Loudspeaker Hookup Cables that attach to
the Amplifier by choosing one of the methods below:
Bare wire cable ends:
Carefully remove sufficient insulation from the cable
ends, refer
to figures
1, 2 &
3. If the
cable is
stranded,
carefully
Figure 2
Figure 3
Figure 1
WARNING: Loudspeaker terminals are hazardous live
and present a risk of electric shock.
4. Connect the MA7000 Power Cord to a live AC outlet.
twist the strands together as tightly as possible.
Note: If desired, the twisted ends can be tinned with
solder to keep the strands together, or attach spade
lug and/or banana connector.
Spade lug or prepared wire connection:
Insert the spade lug connector or prepared section
of the cable end into the terminal side access hole,
and tighten the terminal cap until the cable is firmly
clamped into the terminal so the wires cannot slip
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Push-Buttons
Press to Power the
MA7000 ON or OFF
Press MODE to switch between
Stereo and Mono Modes
LED illuminates during the time a re-
mote command is sent to the MA7000
Turns AC Power ON or OFF to
certain McIntosh Components when
connected via the Data Port and any
McIntosh Components connected to
the ACC Power Control Jack
Press to Power ON
the MA7000
Press to Power OFF
the MA7000
Selects FM Tuner Operating Func-
tions and Track Selection on certain
McIntosh CD Players
Switches OFF the en-
tire MA7000 System
Use to select tuner presets, disc
tracks or any numbered operation
Press to review Tuner Station Pre-
sets and select certain functions on a
variety of McIntosh Components
Selects AM Tuner Operating Func-
tions and Disc Selection on certain
McIntosh Disc Players
Adjusts the volume level up or down
Selects On Screen Functions on a
variety of McIntosh Components
Mutes the audio
Selects a Disc Player, Music Server
or Tape Recorder Function and also
performs various functions on a
variety of McIntosh Components
Selects the FF (Fast Forward) or
REWind Mode on a Disc Player,
Music Server or Tape Recorder;
tunes Up or Down the AM/FM
Dial
Selects one of the seven
available Audio Sources
Note: Push-buttons whose function is not identified above
are for use with other McIntosh Products.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the Remote Control
How to use the Remote Control
Pause
The supplied Remote Control is capable of directly con-
trolling the functions of contemporary McIntosh Source
Components connected to the MA7000 via the Data Ports.
Press the Pause Pushbutton to perform various functions
on a variety of McIntosh Components. It will also pause
the playing of a disc or tape player. The Pause Push-but-
ton will also allow for quick exiting from the active menu
when in the setup mode. The Pause Push-button is also
used as an Enter Push-button with some McIntosh compo-
nents
Input Source Selection
Press the appropriate Source Push-button to select the
desired program source.
Mute
Acc On/Off
Press the MUTE Push-button to mute the audio in all
outputs except the REC OUTPUT. The MUTE LED above
the push-button will flash on and off to indicate that Mute
is active. To un-mute the audio, press the MUTE Push-but-
ton again.
Press ACC ON to turn the power ON or ACC OFF switch-
es AC Power ON or OFF to certain McIntosh Components
when connected via the Data Port and any McIntosh Com-
ponents connected to the ACC Power Control Jack.
Mono
Press the MONO Push-button to switch from Stereo to
Mono for Monophonic listening.
Disc, Server and Tape Functions
Use these push-buttons to operate a DVD Player, CD
Player, CD Changer, Music Server or Tape Recorder.
Numbered Push-buttons
Press Push-buttons 0 through 9 to access tuner station pre-
sets, tracks on discs or selections on a Music Server.
Disc and Track
Use the DISC and TRACK Push-buttons when a Disc
Player or Music Server is being used.
Tuner Push-buttons
Press the AM or FM Push-button to select the desired
broadcast band. Press and release the Channel Up or
Down Push-button to move from station to station. Press
and hold a Channel Up or Down Push-button to move
continuously from station to station. Press +10 Push-button
to start the automatic brief audition of each of the pre-
sets stored in the tuner memory. Press +10 Push-button a
second time to stop on a station preset and exit the review
process.
Volume
Press the Up or Down VOLUME Push-button to raise
or lower the listening volume level.
Note: The Record Signals present at REC OUTPUTS are not
affected by volume changes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Displays, Controls, Push-buttons and Jack
Meter indicates the
Left Channel Out-
put of the amplifier
LED indicates when the
Left Channel Amplifier
POWER GUARD circuit
activates
LED indicates when the
Right Channel Amplifier
POWER GUARD circuit
activates
VOLUME Control allows
adjustment of the listening
level for both channels
BALANCE Control
The LEDs above
Equalizer Controls
Meter indicates the
Right Channel Out-
put of the amplifier
Standby Power
On Indicator
allows adjustment of
the relative volume
balance between
channels
the push-buttons
indicate the current
source selected.
provide 12dB of boost
or cut at the center
frequencies indicated
above each control
Source Push-buttons
Connection for low
OUTPUTS 1 and 2
STANDBY/ON
select audio signals from
seven inputs for listening
impedance dynamic
headphones, for private
listening
Push-buttons with
indicators, turn the
Loudspeakers and
Preamplifier Output 2
On or Off
Push-button switch-
es the MA7000 ON
or OFF (Standby)
and resets the micro-
processors
IR Sensor receives
MONO Push-button with
MUTE Push-button
commands from a
Remote Control
indicator combines the
Left and Right Channel
signals for Monophonic
Sound
with indicator, mutes
the audio from the
Loudspeakers and
Headphones
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MA7000
How to Operate the MA7000
Power On
Headphones Jack
The Red LED above the STANDBY/ON Push-button lights Connect a pair of dynamic
to indicate the MA7000 is in Standby mode. To Switch headphones to the Headphones
ON the MA7000, press the STANDBY/ON Push-button on Jack for private listening. Press
the Front Panel or the Power Push-button on the Remote
Control. The MUTE LED will light for approximately two
seconds after turn on. Refer to page 12 and figure 7.
Note: For an explanation of the Remote Control Push-but-
ton functions, refer to pages 10 and 11.
the MUTE Push-button to
mute the Headphones; press
OUTPUT 1 and/or 2 Push-but-
tons to mute the Loudspeakers.
Note: The Headphone Output
is optimized for imped-
ances ranging from 16 to
250 ohms.
Source Selection
Select the desired source with the appropriate push-button
switch on the Front Panel or Remote Control.
Power Output Meters
The MA7000 Power Output
Meters indicate the power
delivered to the Loudspeakers.
The meters respond to all the
musical information being pro-
duced by the Amplifier. They
indicate to an accuracy of at
least 95% of the power output
with only a single cycle of a
2,000Hz tone burst.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLUME Up or Down Push-buttons on the Remote
Control for the desired listening level.
Balance Control
Rotate the Front Panel BALANCE Control as needed to
achieve approximately equal listening volume levels in
each Loudspeaker. Rotate the BALANCE counterclock-
wise to emphasize the Left Channel by reducing the level
of the Right Channel. Rotate the BALANCE clockwise to
emphasize the Right Channel by reducing the level of the
Left Channel.
Power Guard
During normal operation,
the Front Panel Power Guard
Indicators will momentarily
illuminate during peaks in the
audio signals. In the event the
MA7000 over heats, due to
improper ventilation and/or
high ambient temperature, the
internal protection circuits will
activate. The Front Panel Power
Guard Indicators will continu-
Equalizer Controls
Each of the five Equalizer Frequency Controls will raise
or lower by approximately 12dB, the amplitude of the band
of frequencies centered at the frequency marked above the
controls. Both Left and Right Channels are affected. At the
center detent or flat position of the controls, all equalizer
circuit components are removed from the signal path.
Figure 7
Mono
ously illuminate and the audio will be muted. When the
MA7000 has returned to a safe operating temperature,
normal operation will resume.
Press the Front Panel MONO Push-button or the MODE
Push-button on the Remote Control to combine left and
right stereo signals to a Monophonic signal.
Note: The signals at the REC OUT Jacks are not affected.
How To Make A Tape Recording
1. Select the signal you wish to record with the appropriate
Source Push-button.
2. Adjust the record level using the recorder volume con-
trol and proceed with the recording process.
3. To listen to the playback of the program source just
recorded, press the REC Push-button.
Mute
Press the MUTE Push-button on the Front Panel or Remote
Control to mute the audio in all outputs except the REC
OUTPUT. The MUTE LED above the push-button flashes
to indicate that Mute is active. To un-mute the audio, press
the MUTE Push-button again, press the Remote Control
Volume Push-button(s) or press a Source Push-button.
Note: The MA7000 REC OUTPUTS are not affected by the
VOLUME or BALANCE controls.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MA7000, con’t
How to Operate the MA7000, con’t
Reset of Microprocessors
Using a Separate Power Amplifier
In the unlikely event the controls of the MA7000 stop
functioning, the microprocessors can be reset by perform-
ing the following:
1. Press and hold in the STANDBY/ON Push-button for
approximately five seconds.
There are two different ways to use a separate power am-
plifier with a MA7000. The first way is to use the separate
amplifier instead of the MA7000 built-in Power Amplifier.
Connect the Loudspeakers to the separate power amplifier
and remove the McIntosh Jumpers that are located between
the OUTPUTS 1 Jacks and the POWER AMP INput Jacks.
Refer to figure 8.
2. When the MA7000 cycles On then Off, release the
STANDBY/ON Push-button.
Note: The McIntosh Jumpers must be connected, between
the above mentioned jacks, when the MA7000 Internal
Power Amplifier is to be used.
3. When the STANDBY/ON LED is illuminated press the
STANDBY/ON Push-button, the MA7000 will resume
normal operation.
The second way is to use both a separate power amplifier
and the MA7000 built-in Power Amplifier. Connect one
pair of Loudspeakers to the separate power amplifier and
the second pair to the MA7000. Refer to the MA7000 Out-
put Connection Diagrams located on the separate folded
sheet “Mc1B” and figure 8 below.
Note: This can be performed with the MA7000 On or in
the Standby Mode.
Note: The MA7000 VOLUME Control will affect the sound
level of all the Loudspeakers.
Using Output 2
The MA7000 has provisions for connecting an external
Power Amplifier (to drive Loudspeakers in another room)
and an external sensor for remote operation of the MA7000
from that room. With an external Power Amplifier con-
nected (as illustrated on the McIntosh Connection Diagram
separate sheet “Mc1B”), press the Front Panel OUTPUT 2
Push-button or press on the Remote Control the 2nd Push-
button followed by pressing the OUTPUT 2 Push-button to
switch On or Off the external Power Amplifier.
Jumpers
Figure 8
Figure 9
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Description
Technical Description
McIntosh Laboratory, the company who introduced the
world’s first amplifier that could be called “High Fidel-
ity”, has done it again. The McIntosh engineering staff has
created a power amplifier without compromise, using the
most advanced McIntosh circuit design concepts.
A continuous average power output rating of 250 watts
and with an output current of greater than 50 amperes per
channel, making this the most advanced Integrated Ampli-
fier McIntosh has ever manufactured. The distortion limits
for the MA7000 are no more than 0.005% at rated power
output for all frequencies from 20Hz to 20,000Hz. Typical
performance at mid frequencies is less than 0.002%. The
true distortion readings on the MA7000 are so low, it takes
special measuring techniques to make accurate readings.
The MA7000 can deliver the best possible performance
from any type of high quality loudspeaker system.
Creating an amplifier with this level of performance did
not come easily. Many months of design, testing and mea-
suring were required. Extensive controlled listening tests,
the ultimate form of measuring, were made before the final
design was accepted.
Preamplifier Design Philosophy
All Audio Signal Switching in the MA7000 is done by 25
Electro-Magnetic devices. Electro-Magnetic Switching is
a proven technology that uses the latest in materials and
manufacturing methods. Each switch consists of a glass
tube that is filled with an inert oxygen-free atmosphere and
MA7000 Top View
15
Download from Www.Somanuals.com. All Manuals Search And Download.
sealed with tiny leads protruding
from either end. Refer to figure
10. These leads extend into the
tube and overlap one another
with a separation of a few thou-
sandths of an inch. The leads are
made from a ferrous material that
is influenced by a magnetic field.
Figure 10
They are first plated with gold as a base material, then
with rhodium and finally ruthenium. Ruthenium is the best
contact material known.
The glass assembly is then placed in the center of a
multilayer coil of copper wire. The entire assembly is
molded together in a tough shock absorbing material. The
switch and coil connectors extend from the bottom in the
form of printed circuit board terminals. When a DC volt-
age is applied to the coil, current flows and creates a mag-
netic field. The force of the field causes the leads to bend
and contact one another inside the sealed glass tube. The
inert gas eliminates corrosion of the contacts and insures a
low resistance, distortion free switch.
All inputs, outputs, and data ports are controlled by
logic circuits in the MA7000. The logic is changed by
front panel push-buttons or by a microprocessor IR de-
coder. This microprocessor IR decoder is programmed
with exclusive McIntosh software. It receives data from the
front panel or external sensors and provides the command
signals for input switching, data switching, and volume
control.
Figure 11
never accept the approximately 100 times higher distortion
of many non-feedback designs.
All transistors are selected to have nearly constant cur-
rent gain over the entire current range they must cover. The
12 Power Transistors used in each channel of the MA7000
Power Output Circuitry, have matched uniform current
gain, high current bandwidth product and a large active
region safe operating area. These Power Transistors are the
very latest in semiconductor technology and
incorporate a new design known as Thermal-
Trak™. Refer to figure 12. This allows for the
instantaneous and accurate monitoring of the
Power Transistor Temperature. The MA7000
Power Output Circuitry has a specially de-
The equalizer section uses several high technology
operational amplifiers. The amplifier stage has been op-
timized for the best transient performance and minimum
distortion. Five other operational amplifiers are arranged
in a circuit configuration that is the equivalent of a series
turned circuit. A control potentiometer inserts this series
tuned circuit into either the feedback or input section of the
equalizer amplifier. This provides a 12dB boost or cut at
the frequency of the tuned circuit. Refer to figure 11. The
overall gain of the stage is 0dB when the potentiometer is
at its center detent position. In this position the tone control
elements are completely removed from the signal path.
signed bias circuit to take full advantage of
the ThermalTrak™ Power Transistors and thus
precisely controls the power amplifier opera-
tion over a wide range of music conditions
Figure 12
with the benefits of lower distortion and cooler operation.
Precision metal film resistors and low dielectric absorption
film capacitors are used in all critical circuit locations.
The output signal of the circuit is coupled together
in the unique McIntosh MA7000 Output Autoformer.
It provides low distortion power transfer at frequencies
from below 20Hz to well beyond 20,000Hz with optimum
impedance points of two ohms, four ohms and eight ohms.
The unequaled expertise of McIntosh in the design and
manufacturing of autoformers is legendary in the high
fidelity industry.
Power Amplifier Design Philosophy
The design philosophy incorporated in the MA7000
involved several different techniques, all based on sound
scientific logic. Every stage of voltage or current ampli-
fication must be as linear as possible prior to the use of
negative feedback. McIntosh engineers know how to prop-
erly design negative feedback circuits so they contribute to
the extremely low distortion performance expected from
a McIntosh Amplifier. The typical McIntosh owner would
The high efficiency circuit design of the MA7000 con-
tributes to low operating temperatures. More than 1,000
square inches of heat sink area keep the MA7000 operating
safely with convection cooling. No fans are needed.
ThermalTrak™ - is a trademark of Semiconductor Components Industries,
LLC (SCILLC)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Description, con’t
Autoformers
it can damage valuable loudspeaker
All solid state power amplifier output circuits work best
into what is called an optimum load. This optimum load
may vary considerably from what a loudspeaker requires.
In the case of more than one loudspeaker connected in
parallel, the load to the power amplifier may drop to two
ohms or even less. A power amplifier connected to a load
that is lower than optimum, causes more output current
to flow, which results in extra heat being generated in
the power output stage. This increase in temperature will
result in a reduced life expectancy for the amplifier.
The Autoformer creates an ideal match between the
power amplifier output stage and the loudspeaker. Refer to
figure 13. There is absolutely
system tweeters. You will never
experience the harsh and damaging
distortion due to clipping.
The Power Guard circuit is a
waveform comparator, monitoring
both the input and output wave-
forms. Under normal operating con-
ditions, there are no differences be-
tween the shape of these waveforms.
If an amplifier channel is overdriven,
there will be a difference between
the two signal waveforms. When the
difference exceeds 0.3%, the Power
Guard activates the PG light and a
dynamic electronic attenuator at the
amplifier input reduces the input
volume just enough to prevent any
further increase in distortion. The
Figure 16
no performance limitation
with an Autoformer. Its fre-
quency response exceeds that
of the output circuit itself,
Figure 17
and extends well beyond the
audible range. Its distortion
level is so low it is virtually
impossible to measure. In the
rare event of a power ampli-
fier output circuit failure,
the McIntosh Autoformer
provides absolute protection
Power Guard circuit acts so fast that there are absolutely
no audible side effects and the sonic purity of the music
reproduction is perfectly preserved. The MA7000 Ampli-
fier with Power Guard is not limited to just the rated power
output, but will actually produce distortion free output well
above its rated power due to the McIntosh philosophy of
conservative design.
Figure 13
from possible damage to your valuable loudspeakers.
Power Supply Circuits
Protection Circuits
To compliment the design of the MA7000, there is a
high voltage power supply for both channels. The power
amplifiers draw high current from the AC power line.
Therefore, it is important that they plug directly into the
wall outlet. Turn on inrush current is cushioned by therm-
istors in the power transformer’s primary circuit. This soft
start eliminates component stress during turn-on.
The MA7000 can provide greater than 50 amperes peak
output current to drive uneven speaker loads. Some poor
speaker designs have input impedance that dip to 1 or 2
ohms at various frequencies and the MA7000 has the out-
put current reserve to drive them. The MA7000 has main
filter capacitors that guarantee an excellent signal to noise
ratio and the energy storage necessary for a wide dynamic
range that music demands.
The MA7000 incorporates its version of the McIntosh
Sentry Monitor output transis-
tor protection circuit. Refer to
figure 14. There is absolutely
no compromise in sonic per-
formance with this circuit, and
it ensures safe operation of the
amplifier under even the most
extreme operating conditions.
The different types of protec-
Normal Operating Area
Output
Transistor
Failure
Sentry Monitor
Safety Area
Figure 14
tion circuits incorporated in the MA7000 insure a long and
safe operating life.
The MA7000 also includes the unique patented McIn-
tosh Power Guard circuit. Power Guard eliminates the pos-
sibility of ever overdriving the ampli-
fier into clipping. Refer to figures 15,
16 and 17. An overdriven amplifier
can produce both audible and inaudi-
ble distortion levels exceeding 40%.
The audible distortion is unpleasant
to hear, but the inaudible ultrasonic
distortion is also undesirable, since
Figure 15
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
Power Output
Maximum Input Signal
250 watts is the minimum sine wave continuous average
power output per channel, both channels operating
High Level, 8V unbalanced, 16V balanced
Phono, 45mV
Power Amplifier In, 16V
Output Load Impedance
2, 4 or 8 ohms
Main Output Impedance
50 ohms
Rated Power Band
20Hz to 20,000Hz
Power Guard
Less than 2% THD with up to 16dB overdrive at 1,000Hz
Total Harmonic Distortion
0.005% maximum with both channels operating from 250
milliwatts to rated power, 20Hz to 20,000Hz
Voltage Gain
High Level to Rec Output: 0dB
High Level to Main Output: 20dB
Phono to Rec Output: 46dB
Phono to Main Output: 66dB
Power Amplifier: 25dB
Dynamic Headroom
2.0dB
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
Equalizer Controls
Variable 12dB boost to 12dB cut at 30Hz, 150Hz, 500Hz,
1500Hz and 10,000Hz
Preamplifier Main Output (for rated input)
2.5V unbalanced (8V Maximun)
Power Requirements
5.0V balanced (16V Maximun)
100 Volts, 50/60Hz at 8.0 amps
110 Volts, 50/60Hz at 7.2 amps
120 Volts, 50/60Hz at 6.6 amps
220 Volts, 50/60Hz at 3.3 amps
230 Volts, 50/60Hz at 3.3 amps
240 Volts, 50/60Hz at 3.3 amps
Standby: Less than 1 watt
Sensitivity (for rated output)
High Level, 250mV unbalanced, 500mV balanced
Phono, 1.2 mV
Power Amp In, 2.5V
Note: Refer to the rear panel of the MA7000 for the correct
Signal To Noise Ratio (A-Weighted)
High Level, 100dB below rated output
Phono, 84dB below 5mV input
voltage.
Overall Dimensions
Power Amplifier, 115 below rated output
Width is 17-1/2 inches (44.45cm)
Height is 9-7/16 inches (23.97cm) including feet
Depth is 22 inches (55.88cm) including the Front Panel,
Knobs and Cables
Intermodulation Distortion
0.005% maximum, if the instantaneous peak power is 500
watts or less per channel with both channels operating for
any combination of frequencies from 20Hz to 20,000Hz
Weight
97.5 pounds (44.3 kg) net, 130.5 pounds (59.2 kg) in ship-
ping carton
Wide Band Damping Factor
Greater than 40
Shipping Carton Dimensions
Width is 29-1/2 inches (74.93cm)
Depth is 29 inches (73.66cm)
Height is 17 inches (43.18cm)
Input Impedance
High Level, 20K ohms
Phono, 47K ohms; 65pF
Power Amp In, 10K ohms
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Four 1/4 - 20x2-1/4
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure
to do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 3. Please see the Part List for the
correct part numbers.
Quantity Part Number Description
1
1
2
2
2
034052
034051
034054
034186
034187
Shipping carton top
Shipping carton bottom
Foam Pad (top and bottom)
Foam Pad (front and rear)
Foam Pad (sides)
1
1
1
1
4
4
034136
034137
034188
034264
401212
104058
Inner carton top
Inner carton bottom
Foam Pad (inner carton)
Shipping skid
1/4 - 20x2-1/4 cap screw
Flat washer
19
Download from Www.Somanuals.com. All Manuals Search And Download.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
The continuous improvement of its products is the
policy of McIntosh Laboratory Incorporated who
reserve the right to improve design without notice.
Printed in the U.S.A.
McIntosh Part No. 04105200
Download from Www.Somanuals.com. All Manuals Search And Download.
|