RX-8_8U58-EA-05J_Edition1 Page1
Thursday, August 25 2005 4:53 PM
Black plate (1,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page3
Thursday, August 25 2005 4:53 PM
Black plate (3,1)
AWord to Mazda Owners
Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete
customer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manual
carefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is
necessary, that's the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the best
possible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure
and in your full satisfaction with your Mazda product.
Mazda Motor Corporation
HIROSHIMA, JAPAN
Important Notes About This Manual
Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you
resell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at
Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.
Event Data Recorder
This vehicle is equipped with an event data recorder. In the event of a crash, this device records data related to
vehicle dynamics and safety systems for a short period of time. These data can help provide a better
understanding of the circumstances in which crashes and injuries occur and lead to the designing of safer
vehicles.
Air Conditioning and the Environment
Your Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to
damage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda
Dealer.
Please be aware that this manual applies to all models, equipment and options. As a result, you may find
some explanations for equipment not installed on your vehicle.
©2005 Mazda Motor Corporation
Printed in Japan Oct. 2005(Print1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page4
Thursday, August 25 2005 4:53 PM
Black plate (4,1)
How to Use This Manual
We want to help you get the most driving
pleasure from your vehicle. Your owner's
manual, when read from cover to cover,
can do that in many ways.
NOTE
A NOTE provides information and
sometimes suggests how to make better
use of your vehicle.
Illustrations complement the words of the
manual to best explain how to enjoy your
Mazda. By reading your manual, you can
find out about the features, important
safety information, and driving under
various road conditions.
The symbol below, located on some parts
of the vehicle, indicates that this manual
contains information related to the part.
Please refer to the manual for a detailed
explanation.
The symbol below in this manual means
“Do not do this” or “Do not let this
happen”.
Index: A good place to start is the Index,
an alphabetical listing of all information
in your manual.
You'll find several WARNINGs,
CAUTIONs, and NOTEs in the manual.
WARNING
A WARNING indicates a situation in
which serious injury or death could
result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in
which bodily injury or damage to your
vehicle, or both, could result if the
caution is ignored.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page5
Thursday, August 25 2005 4:53 PM
Black plate (5,1)
Table of Contents
Interior, exterior views and part identification of your Mazda.
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Important information about driving your Mazda.
Explanation of instruments and controls.
Use of various features for drive comfort, including air-conditioning and audio
system.
Helpful information on what to do in an emergency.
How to keep your Mazda in top condition.
Important consumer information including warranties and add-on equipment.
Technical information about your Mazda.
Navigation System
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page6
Thursday, August 25 2005 4:53 PM
Black plate (6,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page8
Thursday, August 25 2005 4:53 PM
Black plate (8,1)
Your Vehicle at a Glance
Dashboard and Interior Overview
The equipment and installation position varies by model.
Refer to Navigation System at the end of the manual (if equipped).
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page9
Thursday, August 25 2005 4:53 PM
Black plate (9,1)
Your Vehicle at a Glance
Dashboard and Interior Overview
MT shift lever ...................................................................................................... page 5-9
AT shift lever (Sport AT) ................................................................................... page 5-11
Vanity mirror ...................................................................................................... page 6-38
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page11
Thursday, August 25 2005 4:53 PM
Black plate (11,1)
Your Vehicle at a Glance
Exterior Overview
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page12
Thursday, August 25 2005 4:53 PM
Black plate (12,1)
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page13
Thursday, August 25 2005 4:53 PM
Black plate (13,1)
Essential Safety Equipment
2
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Seats ............................................................................................... 2-2
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page14
Thursday, August 25 2005 4:53 PM
Black plate (14,1)
Essential Safety Equipment
Seats
Front Seats (Manually
Operated Seats)
WARNING
Make sure the adjustable components
of a seat are locked in place:
WARNING
Adjustable seats and seatbacks that
are not securely locked are dangerous.
In a sudden stop or collision, the seat
or seatback could move, causing
injury. Make sure the adjustable
components of the seat are locked in
place by attempting to slide the seat
forward and backward and rocking
the seatback.
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
qSeat Slide
WARNING
Adjust the driver seat only when the
vehicle is stopped:
Adjusting the driver's seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident.
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag components.
If there was a subsequent collision, an
air bag may not deploy which could
lead to injuries. Always have an
Authorized Mazda Dealer inspect the
front seats, front seat belt
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
pretensioners and air bags after a
collision.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page15
Thursday, August 25 2005 4:53 PM
Black plate (15,1)
Essential Safety Equipment
Seats
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
WARNING
Do not drive with the seatback
unlocked:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After adjusting the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
qSeat Recline
WARNING
Do not drive with the seats reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you can
slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back and
upright.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Always sit in a passenger seat properly
with the seatback upright and feet on
the floor:
If your vehicle is equipped with front
passenger seat weight sensors, sitting
in the front passenger seat improperly
out of position or with the seatback
reclined too far while the vehicle is
moving is dangerous as it can take off
weight from the seat bottom and affect
the weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could cause result in serious injury.
Always sit upright against your
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
seatback, with your feet on the floor.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page16
Thursday, August 25 2005 4:53 PM
Black plate (16,1)
Essential Safety Equipment
Seats
qFolding the Passenger's Seat
CAUTION
When returning a rear-reclined seatback
to its upright position, make sure you
hold onto the seatback with your other
hand while operating the lever. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
WARNING
Do not drive with the seatback
unlocked:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After adjusting the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
q
Height Adjustment (Driver's Seat)
By moving the seat lever up or down, the
seat bottom height can be adjusted.
Up
Down
To fold the seatback, pull the lever and
lower the seatback forward.
To return it to the upright position, lift the
seatback and push it into place. Rock the
seatback to make sure it is locked.
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page17
Thursday, August 25 2005 4:53 PM
Black plate (17,1)
Essential Safety Equipment
Seats
Front Seats (Electrically
Operated Seats)
CAUTION
l
l
The seat-bottom power adjustment is
operated by motors. Avoid extended
operation because excessive use can
damage the motors.
WARNING
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
To prevent the battery from running
down, avoid using the power
adjustment when the engine is
stopped. The adjuster uses a large
amount of electrical power.
l
Don't use the switch to make more
than one adjustment at a time.
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
qSeat Slide
To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag components.
If there was a subsequent collision, an
air bag may not deploy which could
lead to injuries. Always have an
Authorized Mazda Dealer inspect the
front seats, front seat belt
pretensioners and air bags after a
collision.
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page18
Thursday, August 25 2005 4:53 PM
Black plate (18,1)
Essential Safety Equipment
Seats
Change the seatback angle by pressing the
front or rear side of the reclining switch.
Release the switch at the desired position.
qSeat Recline
WARNING
Do not drive with the seats reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you can
slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back and
upright.
Always sit in a front passenger seat
properly with the seatback upright and
feet on the floor:
qHeight Adjustment
Front of seat bottom
To adjust the front height of the seat
bottom, raise or lower the front of the
slide lifter switch on the left side of the
seat.
If your vehicle is equipped with front
passenger seat weight sensors, sitting
in the front passenger seat improperly
out of position or with the seatback
reclined too far while the vehicle is
moving is dangerous as it can take off
weight from the seat bottom and affect
the weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could cause result in serious injury.
Always sit upright against your
seatback, with your feet on the floor.
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page19
Thursday, August 25 2005 4:53 PM
Black plate (19,1)
Essential Safety Equipment
Seats
Rear of seat bottom
qFolding the Passenger's Seat
Raise or lower the back of the switch to
adjust the rear height of the seat bottom.
WARNING
Do not drive with the seatback
unlocked:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After adjusting the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
qLumbar Support Adjustment
The amount of lumbar support can be
adjusted by pressing the switch.
To increase the seat firmness, press and
hold the front part of the switch to the
desired position, then release it.
Press the rear part of the switch to
increase softness.
To fold the seatback, pull the lever and
lower the seatback forward.
To return it to the upright position, lift the
seatback and push it into place. Rock the
seatback to make sure it is locked.
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page20
Thursday, August 25 2005 4:53 PM
Black plate (20,1)
Essential Safety Equipment
Seats
qSeat Warmer
Rear Seat
The front seats are electrically heated. The
ignition switch must be in the ON
position.
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
WARNING
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
NOTE
The seat temperature is regulated
automatically by a thermostat. Other
than turning it on or off, it cannot be
adjusted.
Do not allow anyone to sit on the
center console between the rear seats:
Allowing someone to sit on the rear
center console between the rear seats
is dangerous. The rear center console
is not designed for occupant seating.
During a collision, occupants not
wearing a seat belt could be thrown
from the vehicle and seriously injured
or even killed.
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page21
Thursday, August 25 2005 4:53 PM
Black plate (21,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way
when not in use.
The driver's seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.
However, the front passenger's seat and all rear lap/shoulder belt retractors operate in two
modes: emergency locking mode, and for child-restraint systems, automatic locking mode.
While we recommend you put all children in the rear seats, if you must use the front
passenger seat for a child, slide the front passenger seat as far back as possible and make
sure any child-restraint system is secured properly.
WARNING
Always wear your seat belt and make sure all occupants are properly restrained:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown out
of the vehicle. They could be seriously injured or even killed. In the same collision,
occupants wearing seat belts would be much safer.
Do not operate a vehicle with a damaged seat belt:
Using a damaged seat belt is dangerous. An accident could damage the belt webbing
of the seat belt in use. A damaged seat belt cannot provide adequate protection in a
collision. Front air bags and pretensioners work together, regardless of whether or not
a front seat was occupied during a collision, or whether or not any air bag and seat
belt pretensioner deployed all front seat belts and air bags must be inspected and
replaced if necessary. Have an Authorized Mazda Dealer inspect all seat belt systems
in use during an accident before they are used again.
Do not wear twisted seat belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt is not
available to absorb the impact. This puts more force on the bones beneath the belt,
which could cause serious injury or death.
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page22
Thursday, August 25 2005 4:53 PM
Black plate (22,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could be
crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.
Make sure the seat belt is not caught or pinched in the door:
Wearing a seat belt that is caught or pinched in the door is dangerous. The seat belt
could become loose and not provide adequate protection in a sudden stop or collision.
Make sure nothing is placed on the seat belt slide bar:
Placing your foot or other objects such as an umbrella on the seat belt slide bar is
dangerous. The front seat belt is built into the rear door, and the lower part of the seat
belt slides forward or backward along the seat belt slide bar as the rear door opens or
closes. If the seat belt slider is blocked, the seat belt could be improperly positioned
and would provide little or no protection in a collision.
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep them
clean. For more details about cleaning the seat belts, refer to “Cleaning the Lap/Shoulder
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page23
Thursday, August 25 2005 4:53 PM
Black plate (23,1)
Essential Safety Equipment
Seat Belt Systems
qPregnant Women and Persons with Serious Medical Conditions
Pregnant women should wear seat belts. Ask your doctor for specific recommendations.
The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.
The shoulder belt should be worn across your shoulder properly, but never across the
stomach area.
Persons with serious medical conditions also should wear seat belts. Check with your
doctor for any special instructions regarding specific medical conditions.
qEmergency Locking Mode
In the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision. When the seat belt is fastened, it will
always be in the emergency locking mode until it is switched to automatic locking mode by
pulling it all the way out to its full length. If the belt feels tight and hinders comfortable
movement while the vehicle is stopped or in motion, it may be in the automatic locking
mode because the belt has been pulled too far out. To return to the belt to the more
comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level
area, retract the belt fully to convert it back to emergency locking mode and then extend it
around you again.
qAutomatic Locking Mode
Always use the automatic locking mode to keep the child-restraint system from shifting to
an unsafe position in the event of an accident. To enable seat belt automatic locking mode,
pull it all the way out and connect it as instructed on the child-restraint system. It will
retract down to the child-restraint system and stay locked on it. See the section on child
restraint (page 2-19).
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page25
Thursday, August 25 2005 4:53 PM
Black plate (25,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belts
WARNING
qFastening the Seat Belts
1. Grasp the tongue.
Positioning the Shoulder Portion of
the Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
2. Slowly pull out the lap/shoulder belt.
Belt
Tongue
4. Position the lap belt as low as possible,
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
3. Insert the tongue into the buckle until
you hear a click.
Take up slack
Keep low on
hip bone
Tongue
Too high
WARNING
Buckle
Positioning the Lap Portion of the
Seat Belt:
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page26
Thursday, August 25 2005 4:53 PM
Black plate (26,1)
Essential Safety Equipment
Seat Belt Systems
qUnfastening the Seat Belts
Front Seat Belt Pretensioner
and Load Limiting Systems
Depress the button on the buckle. If the
belt does not fully retract, pull it out and
check for kinks or twists. Then make sure
it remains untwisted as it retracts.
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems.
In moderate or greater frontal or near-
frontal accidents, the front air bag and
pretensioner systems deploy
simultaneously. The pretensioners take up
slack in the front seat belts as the air bags
are expanding. The seat belt pretensioner
system cannot provide adequate
protection in an accident if the seat belt is
not fastened properly. The load limiting
system releases belt webbing in a
controlled manner to reduce belt force on
the occupant's chest.
Button
NOTE
If a belt does not fully retract, inspect it
for kinks and twists. If it is still not
retracting properly, have it inspected at
an Authorized Mazda Dealer.
WARNING
Incorrect Positioning of the Driver
and Front Passenger Seat Belts:
Incorrect positioning of the driver and
passenger seat belts is dangerous.
Without proper positioning, the
pretensioner and load limiting systems
cannot provide adequate protection in
an accident and this could result in
serious injury. Wear seat belts only as
recommended in this owner's manual
(page 2-13).
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page27
Thursday, August 25 2005 4:53 PM
Black plate (27,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
WARNING
Expended Seat Belt Pretensioners:
One or both front air bags may deploy,
and the corresponding pretensioner(s)
will also deploy at the same time. Use
of front seat belts with the
Pretensioner System Disposal:
Improper disposal of the pretensioner
system or a vehicle with non-
deactivated pretensioners is
dangerous. Unless all safety
pretensioner system expended is
dangerous. Like the air bags, the seat
belt pretensioners will only function
once. After they are expended, they
will not function again and must be
replaced immediately. If the seat belt
pretensioners are not replaced, the
risk of injury in a collision will
procedures are followed, injury could
result. Ask an Authorized Mazda
Dealer how to safely dispose of the
pretensioner system or how to scrap a
pretensioner-equipped vehicle.
NOTE
increase. Always have an Authorized
Mazda Dealer inspect the seat belt
pretensioners and air bags after any
collision. Expended seat belt
pretensioners and air bags must be
replaced after any collision which
caused them to deploy. Additionally,
the load limiter will only limit loads on
the chest once in a collision and is
another reason to have the front seat
belts inspected.
l
The pretensioner system will only
activate in a moderate or greater
frontal or near-frontal collision. It
will not activate in most rollovers,
side or rear impacts.
l
Some smoke (non-toxic gas) will be
released when the air bags and
pretensioners deploy. This does not
indicate a fire. This gas normally has
no effect on occupants, however,
those with sensitive skin may
experience light skin irritation. If
residue from the deployment of the
air bags or the front pretensioner
system gets on the skin or in the
eyes, wash it off as soon as possible.
Modification or Testing of the
Pretensioner System:
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable which
would prevent it from activating in an
accident. The occupants or repairers
could be seriously injured. Never
modify the components or wiring, or
use electronic testing devices on the
pretensioner system.
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page28
Thursday, August 25 2005 4:53 PM
Black plate (28,1)
Essential Safety Equipment
Seat Belt Systems
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
Seat Belt Extender
If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.
If the air bag/front seat belt pretensioner
system is normal, the warning light
illuminates when the ignition switch is
turned to the ON position or after the
engine is cranked. After about 6 seconds
it goes out.
A system malfunction is indicated when
the warning light constantly flashes,
constantly illuminates or doesn't
illuminate at all when the ignition switch
is turned to the ON position. If any of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
WARNING
Unnecessary Use of an Extender:
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly. In
an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
WARNING
Self-Servicing the Air Bag/
Pretensioner Systems:
Using an Improper Extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt will
not provide adequate protection and
the user could be seriously injured in
an accident. Only use the extender
provided for you and for the particular
vehicle and seat. NEVER use the
extender in a different vehicle or seat.
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death. Never tamper
with the systems and always have an
Authorized Mazda Dealer perform all
servicing and repairs.
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page29
Thursday, August 25 2005 4:53 PM
Black plate (29,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Warning Light/Beep
WARNING
Using an Extender That is Too Long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Don't use the extender or choose one
shorter in length if the distance
between the extender's buckle and the
center of the user's body is less than
15cm (6 in).
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Conditions of operation
NOTE
Condition
Result
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left connected,
the seat belt extender might get
damaged as it will not retract with the
rest of the seat belt and can easily fall
out of the door when not in use and be
damaged the seat belt warning light will
not illuminate and function properly.
The warning light
The driver's seat belt is not flashes illuminates for
fastened when the ignition about 1 minute and a
switch is turned to the ON beep sound will be
position.
heard for about 6
seconds.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The warning light
turns off and the beep
sound stops.
The driver's seat belt is
The warning light will
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
position.
heard.
qBelt Minder
NOTE
The belt minder can be deactivated.
Consult an Authorized Mazda Dealer to
deactivate and restore the seat belt
minder.
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page30
Thursday, August 25 2005 4:53 PM
Black plate (30,1)
Essential Safety Equipment
Seat Belt Systems
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the warning light/beep
operates to give you further reminders
according to the chart below.
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period (90 seconds) has passed.
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page31
Thursday, August 25 2005 4:53 PM
Black plate (31,1)
Essential Safety Equipment
Child Restraint
Child Restraint Precautions
Mazda strongly urges the use of child-restraint systems for children small enough to use
them.
You are required by law to use a child-restraint system for children in the U.S. and Canada.
Check your local and state or provincial laws for specific requirements regarding the safety
of children riding in your vehicle.
Whatever child-restraint system you consider, please pick the appropriate one for the age
and size of the child, obey the law and follow the instructions that come with the individual
child-restraint system.
A child who has outgrown child-restraint systems should sit in the rear and use seat belts,
both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to
the center of the vehicle.
Statistics confirm that the rear seat is the best place for all children up to 12 years of age,
and more so with a supplemental restraint system (air bags).
A rear-facing child-restraint system should NEVER be used on the front seat with the air
bag system activated. The front passenger's seat is also the least preferred seat for other
child-restraint systems.
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
front passenger seat weight sensors work as a part of the supplemental restraint system.
This system deactivates the front passenger front and side air bags and also the front
passenger seat belt pretensioner system when the total seated weight on the front passenger
seat is less than approximately 30 kg (66 lb).
When an infant or small child sits on the front passenger seat, the system shuts off the front
passenger front and side air bags and seat belt pretensioner system, so make sure the front
passenger air bag deactivation indicator light illuminates.
Even if the front passenger air bag is shut off, Mazda strongly recommends that children be
properly restrained and child-restraint systems of all kinds are properly secured on the rear
seats which are the best place for children.
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page32
Thursday, August 25 2005 4:53 PM
Black plate (32,1)
Essential Safety Equipment
Child Restraint
WARNING
Use the correct size child-restraint system:
For effective protection in vehicle accidents and sudden stops, a child must be
properly restrained using a seat belt or child-restraint system depending on age and
size. If not, the child could be seriously injured or even killed in an accident.
Follow the manufacturer's instructions and always keep the child-restraint system
buckled down:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make sure
any child-restraint system is properly secured in place according to the child-restraint
system manufacturer's instructions. When not in use, remove it from the vehicle or
fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH
child-restraint systems and the corresponding tether anchor.
Always secure a child in a proper child-restraint system:
Holding a child in your arms while the vehicle is moving is extremely dangerous. No
matter how strong the person may be, he or she cannot hold onto a child in a sudden
stop or collision and it could result in serious injury or death to the child or other
occupants. Even in a moderate accident, the child may be exposed to air bag forces
that could result in serious injury or death to the child, or the child may be slammed
into the adult, injuring the adult.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates.
The child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
2-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page33
Thursday, August 25 2005 4:53 PM
Black plate (33,1)
Essential Safety Equipment
Child Restraint
WARNING
Avoid putting a front-facing child-restraint system on the front passenger seat:
A front-facing child-restraint system should only be put on the front seat when it is
unavoidable. In a collision, the force of a deploying air bag could cause serious injury
or death to the child. Always move the seat as far back as possible.
Seating a child in a child-restraint system on the front passenger seat is dangerous:
Vehicles equipped with front passenger seat weight sensors are also equipped with a
passenger seat weight sensors, if you must use the front passenger seat for children,
seating a child in a child-restraint system on the front passenger seat under the
following conditions increases the danger of the front passenger air bag deploying
and could result in serious injury or death to the child.
l
The total seated weight of the child with the child-restraint system on the front
passenger seat is approximately 30 kg (66 lb) or more with a child in the child-
restraint system.
Luggage or other items are placed on the seat with the child in the child-restraint
l
system.
l
A rear passenger or luggage push or pull down on the front passenger seatback.
A rear passenger puts their feet on the front seat rails.
Luggage or other items are placed on the seatback or hung on the head restraint.
The seat is washed.
Liquids are spilled on the seat.
The front passenger seat is moved backward, pushing into luggage or other items
l
l
l
l
l
placed behind it.
The front passenger seatback contacts the rear seat.
Luggage or other items are placed between the front passenger seat and driver seat.
Any accessories, which might increase the total seated weight on the front
l
l
l
passenger seat, are attached to the front passenger seat.
The designated positions with seat belts on the rear seats are the safest places for
children. Always use seat belts and child restraints.
2-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page34
Thursday, August 25 2005 4:53 PM
Black plate (34,1)
Essential Safety Equipment
Child Restraint
WARNING
Do not allow a child to lean over or against the side window of a vehicle with side and
curtain air bags:
It is dangerous to allow anyone to lean over or against the side window, the area of
the front passenger seat, the front and rear window pillars and the roof edge along
both sides from which the side and curtain air bags deploy, even if a child-restraint
system is used. If the vehicle is equipped with side and curtain air bags, the impact of
inflation could cause serious injury or death to the child. Furthermore, leaning over
or against the front door could block the side and curtain air bags and eliminate the
advantages of supplemental protection. With the front air bag and the additional side
air bag that comes out of the front seat, the rear seat is always a better location for
children. Do not allow a child to lean over or against the side window, even if the child
is seated in a child-restraint system.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could be
crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.
CAUTION
A seat belt or child-restraint system can become very hot in a closed vehicle during
warm weather. To avoid burning yourself or a child, check them before you or your child
touches them.
NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of specially
designed LATCH child-restraint systems in the rear seat. When using these anchors to
2-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page35
Thursday, August 25 2005 4:54 PM
Black plate (35,1)
Essential Safety Equipment
Child Restraint
Installing Child-Restraint
Systems
WARNING
Tethered Child-Restraint Systems
Work Only on Tether-Equipped Rear
Seats:
Accident statistics reveal that a child is
safer in the rear seat. The front passenger's
seat is clearly the worst choice for any
child under 12, and with rear-facing child-
restraint systems it is clearly unsafe due to
air bags.
Installation of a tether equipped child-
restraint system in the front
passenger's seat defeats the safety
design of the system and will result in
an increased chance of serious injury
if the child-restraint system goes
forward without benefit of being
tethered.
Some child-restraint systems now come
with tethers and therefore must be
installed on the seats that take tethers to
be effective. In your Mazda, tethered
child-restraint systems can only be
accommodated in the two positions on the
rear seat.
Place tether equipped child-restraint
systems where there are tether
anchors.
qRear Seat Child-Restraint System
Even if your vehicle is equipped with
front passenger seat weight sensors (page
2-37), which automatically deactivates the
front passenger air bag, a rear seat is the
safest place for a child of any age or size.
Installation
Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped child-
restraint system to the rear LATCH lower
anchors. Refer to “LATCH Child-
Some child-restraint systems also employ
specially designed LATCH attachments;
refer to “LATCH Child-Restraint
NOTE
Follow the child-restraint system
manufacturer's instructions carefully. If
you are not sure whether you have a
LATCH system or tether, check in the
child-restraint system manufacturer's
instructions and follow them
accordingly. Depending on the type of
child-restraint system, it may not
employ seat belts which are in
automatic locking mode.
2-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page36
Thursday, August 25 2005 4:54 PM
Black plate (36,1)
Essential Safety Equipment
Child Restraint
1. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
NOTE
Inspect this function before each use of
the child-restraint system. You should
not be able to pull the shoulder belt out
of the retractor while the system is in
the automatic locking mode. When you
remove the child-restraint system, be
sure the belt fully retracts to return the
system to emergency locking mode
before occupants use the seat belts.
2. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
4. If your child-restraint system requires
the use of a tether strap, hook and
tighten the tether strap by following the
manufacturer's instructions.
Anchor bracket location
3. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. Clicking
from the retractor will be heard during
retraction if the system is in the
automatic locking mode. If the belt
does not lock the seat down tight,
repeat this step.
Tether strap position
Tether
strap
Anchor
bracket
2-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page37
Thursday, August 25 2005 4:54 PM
Black plate (37,1)
Essential Safety Equipment
Child Restraint
NOTE
WARNING
l
To check if your front seats have side
air bags:
Mazda vehicles equipped with side
air bag will have a “SRS AIRBAG”
tag on the outboard shoulder of the
front seats.
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury.
l
To check if your vehicle has curtain
air bags:
Every Mazda curtain air bag will
have an “SRS AIRBAG” marking on
the front and rear window pillars
along the roof edge.
qIf You Must Use the Front Seat
for Children
If you cannot put all children in the rear
seat, at least put the smallest children in
the rear and be sure the largest child up
front uses the shoulder belt over the
shoulder.
NEVER put a rear-facing child-restraint
system on the front passenger seat, even
with a seat weight sensor equipped
vehicle.
This seat is also not set up for tethered
child-restraint systems, put them in one of
the rear seat positions set up with tether
anchors.
WARNING
Front Passenger's Seat Position:
As your vehicle has front air bags and
doubly so if your vehicle has side air
bags, a front-facing child-restraint
system should be put on the front seat
only when it is unavoidable.
Even if the front passenger air bag
deactivation indicator light
illuminates, always move the seat as
far back as possible, because the force
of a deploying air bag could cause
serious injury or death to the child.
Always move the seat as far back as
possible, because the force of a
deploying air bag could cause serious
injury or death to the child.
Likewise the LATCH child-restraint
system cannot be secured in the front
passenger's seat and should be used in the
rear seat.
Don't allow anyone to sleep against the
side window if you have an optional side
and curtain air bag, it could cause serious
injuries to an out of position occupant. As
children more often sleep in cars, it is
better to put them in the rear seat. If
installing the child-restraint system on the
front seat is unavoidable, follow these
instructions when using a front-facing
child-restraint system in the front
passenger's seat.
2-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page38
Thursday, August 25 2005 4:54 PM
Black plate (38,1)
Essential Safety Equipment
Child Restraint
qFront Passenger's Seat Child-
WARNING
Restraint System Installation
1. Slide the seat as far back as possible.
Never use a rear-facing child-restraint
system in the front seat with an air bag
that could deploy:
Rear-facing child-restraint systems on
the front seat are particularly
dangerous.
Even in a moderate collision, the
child-restraint system can be hit by a
deploying air bag and moved violently
backward resulting in serious injury
or death to the child.
Do not allow a child to lean over or
against the side window of a vehicle
with side and curtain air bags:
2. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
It is dangerous to allow anyone to lean
over or against the side window, the
area of the front passenger seat, the
front and rear window pillars and the
roof edge along both sides from which
the side and curtain air bags deploy,
even if a child-restraint system is used.
If the vehicle is equipped with side and
curtain air bags, the impact of
inflation could cause serious injury or
death to the child. Furthermore,
leaning over or against the front door
could block the side and curtain air
bags and eliminate the advantages of
supplemental protection. With the
front air bag and the additional side
air bag that comes out of the front
seat, the rear seat is always a better
location for children. Do not allow a
child to lean over or against the side
window, even if the child is seated in a
child-restraint system.
3. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
4. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. Clicking
from the retractor will be heard during
retraction if the system is in automatic
locking mode. If the belt does not lock
the seat down tight, repeat the previous
step and also this one.
2-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page39
Thursday, August 25 2005 4:54 PM
Black plate (39,1)
Essential Safety Equipment
Child Restraint
NOTE
WARNING
l
Inspect this function before each use
Seating a Child in a Child-Restraint
System on the Front Passenger Seat
With the Front Passenger Air Bag
Deactivation Indicator Light Not
Illuminated:
While it is always better to install any
child-restraint system on the rear seat,
it is essential to do so if the front
passenger air bag deactivation
indicator light does not illuminate
restraint system installed on the front
passenger seat with the front
of the child-restraint system. You
should not be able to pull the
shoulder belt out of the retractor
while the system is in the automatic
locking mode. When you remove the
child-restraint system, be sure the
belt fully retracts to return the system
to emergency locking mode before
occupants use the seat belts.
l
Follow the child-restraint system
manufacturer's instructions carefully.
Depending on the type of child-
restraint system, it may not employ
seat belts which are in automatic
locking mode.
passenger air bag deactivation
indicator light not illuminated is
dangerous. If this indicator light does
not illuminate even when the total
seated weight is less than
5. Make sure the front passenger air bag
deactivation indicator light illuminates
after installing a child-restraint system
on the front passenger seat.
approximately 30 kg (66 lb), this
means that the front passenger front
and side air bags, and seat belt
pretensioner are ready for deployment.
If an accident were to deploy an air
bag, a child sitting in the front
passenger seat could be seriously
injured or killed. If the indicator light
does not illuminate after installing a
child-restraint system on the front
passenger seat, install the child-
restraint system on the rear seat and
consult an Authorized Mazda Dealer
as soon as possible.
Refer to Front passenger air bag
deactivation indicator light on page
2-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page40
Thursday, August 25 2005 4:54 PM
Black plate (40,1)
Essential Safety Equipment
Child Restraint
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise the
seat will bounce around and put the child in danger. Most LATCH child-restraint systems
must also be used in conjunction with a tether to be effective. If they have a tether you
must use it to better assure your child's safety.
WARNING
Manufacturer's Instructions for Child-Restraint System:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make sure
the child-restraint system is properly secured in place according to the child-restraint
system manufacturer's instructions.
Unsecured Child-Restraint System:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Follow the
child-restraint system manufacturer's instructions on belt routing to secure the seat
just as you would with a child in it so that nobody is tempted to put a child in an
improperly secured seat later on. When not in use, remove it from the vehicle or fasten
it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-
restraint systems.
LATCH Child-Restraint Systems:
Not following the child-restraint system manufacturer's instructions when installing
the child-restraint system is dangerous. If seat belts or a foreign object prevent the
child-restraint system from being securely attached to the LATCH lower anchors and
the child-restraint system is installed improperly, the child-restraint system could move
in a sudden stop or collision causing serious injury or death to the child or other
occupants. When installing the child-restraint system, make sure there are no seat
belts or foreign objects near or around the LATCH lower anchors. Always follow the
child-restraint system manufacturer's instructions.
2-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page41
Thursday, August 25 2005 4:54 PM
Black plate (41,1)
Essential Safety Equipment
Child Restraint
Anchor bracket location
q
LATCH Child-Restraint System
Installation Procedure (Rear Seats)
1. Expand the open seams on the rear of
the seat bottom slightly to verify the
locations of the LATCH lower anchors.
Tether strap position
Tether strap
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
Anchor
bracket
2. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
WARNING
Use the tether and tether anchor only
for a child-restraint system:
3. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury.
2-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page42
Thursday, August 25 2005 4:54 PM
Black plate (42,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint Systems (SRS) Precautions
The front and side supplemental restraint systems (SRS) include up to 6 air bags (verify
“SRS AIRBAG” location indicator marks).
They are located in:
l
The steering wheel hub (driver air bag)
l
The front passenger dashboard (front passenger air bag)
l
The outboard sides of the front seatbacks (side air bags)
l
The front and rear window pillars, and the roof edge along both sides (curtain air bags)
These systems operate independently depending on the type of accident encountered; if
you have side and curtain air bags, the side and curtain air bags are not likely to deploy on
both sides in the same accident because a vehicle is not often hit from both sides. The side
and curtain air bags and the frontal air bag system will not normally deploy during the
same type of accident unless a combination of frontal and side impacts occur.
The air bag supplemental restraint systems are designed to provide supplemental protection
only in the front seats in certain situations and the rear outside passenger positions only in
same-side collisions, so seat belts are always important in the following ways:
Without seat belt usage, the air bags cannot provide adequate protection during an accident.
Seat belt usage is necessary to:
l
Keep the occupant from being thrown into an inflating air bag.
l
Reduce the possibility of injuries during an accident that is not designed for air bag
inflation, such as roll-over or rear impact.
l
Reduce the possibility of injuries in frontal or side collisions that are not severe enough
to activate the air bags.
l
Reduce the possibility of being thrown from your vehicle.
l
Reduce the possibility of injuries to lower body and legs during an accident because the
air bags provide no protection to these parts of the body.
l
Hold the driver in a position which allows better control of the vehicle.
Small children must be protected by a child-restraint system as stipulated by law in every
state and province. In certain states and provinces, larger children must use a child-restraint
system (page 2-19).
Carefully consider which child-restraint system is necessary for your child and follow the
installation directions in this Owner's Manual as well as the child-restraint system
manufacturer's instructions.
2-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page43
Thursday, August 25 2005 4:54 PM
Black plate (43,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Seat belts must be worn in air bag equipped vehicles:
Depending only on the air bags for protection during an accident is dangerous. Alone,
air bags may not prevent serious injuries. The appropriate air bags can be expected to
inflate only in the first collision with frontal, near frontal or side forces that are at
least moderate. Vehicle occupants should always wear seat belts.
Children should not ride in the front passenger seat:
Placing a child, 12 years or under, in the front seat is dangerous. The child could be
hit by a deploying air bag and be seriously injured or even killed. Even if the front
passenger air bag deactivation indicator light illuminates, always move the front
passenger seat as far back as possible. A sleeping child is more likely to lean against
the door and be hit by the side air bag in a moderate, right-side collision. Whenever
possible, always secure a child 12 years and under on the rear seat with an
appropriate child-restraint system for the child's age and size.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates.
The child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
Do not sit too close to front air bags:
Sitting too close to the air bag modules or placing hands or feet on them is extremely
dangerous. Front air bags inflate with great force and speed. Serious injuries could
occur if someone is too close. The driver should always hold onto only the rim of the
steering wheel. The front seat passenger should keep both feet on the floor. Front seat
occupants should adjust their seats as far back as possible and always sit upright
against the seatbacks with seat belts worn properly.
2-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page44
Thursday, August 25 2005 4:54 PM
Black plate (44,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Sit in the center of the seat and wear seat belts properly:
Sitting too close to the side air bag modules or placing hands on them is extremely
dangerous. The side air bags inflate with great force and speed directly out of the
outboard side of the front seat and expand along the front door on the side the car is
hit. Serious injury could occur if someone is sitting too close to the door or leaning
against a window, or if rear seat occupants grab the sides of the front seatbacks.
Furthermore, sleeping up against the door or hanging out the windows in the vehicle
could block the side and curtain air bags and eliminate the advantages of
supplemental protection. Give the side and curtain air bags room to work by sitting in
the center of the seat while the vehicle is moving with seat belts worn properly.
Do not attach objects on or around the area where a front air bag deploys:
Attaching an object to the front air bag modules or placing something in front of them
is dangerous. In an accident, the object could interfere with front air bag inflation and
injure the occupants.
Do not attach objects on or around the area where a side air bag deploys:
Attaching things to the front seat in such a way as to cover the outboard side of the
seat in any way is dangerous. In an accident the object could interfere with the side air
bag, which inflates from the outboard side of the front seats, impeding the added
protection of the side air bag system or redirecting the air bag in a way that is
dangerous. Furthermore, the bag could be cut open spewing exhaust.
Do not hang net bags, map pouches or backpacks with side straps on the front seats.
Never use seat covers on the front seats. Always keep the side air bag modules in your
front seats free to deploy in the event of a side collision.
Do not attach objects on or around the area where a curtain air bag deploys:
Attaching objects to the areas where the curtain air bag activates such as on the
windshield glass, side door glass, front and rear window pillars and along the roof
edge and assist grips is dangerous. In an accident the object could interfere with the
curtain air bag, which inflates from the front and rear window pillars and along the
roof edge, impeding the added protection of the curtain air bag system or redirecting
the air bag in a way that is dangerous. Furthermore, the bag could be cut open
spewing exhaust.
Do not place hangers or any other objects on the assist grips. When hanging clothes,
hang them on the coat hook directly. Always keep the curtain air bag modules free to
deploy in the event of a side collision.
2-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page45
Thursday, August 25 2005 4:54 PM
Black plate (45,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not touch the internal components of the air bag modules after the bags have
inflated:
Hot air bag inflators are dangerous. Immediately after inflation, the inflators in the
steering wheel, dashboard, seatbacks, or the front and rear window pillars and along
the roof edge are very hot. You could get burned.
Never install any front-end equipment to your vehicle:
Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bull
bar, push bar, or other similar devices), snowplow, or winches, is dangerous. The air
bag crash sensor system could be affected. This could cause air bags to inflate
unexpectedly, or it could prevent the air bags from inflating during an accident. Front
occupants could be seriously injured.
Do not adjust the suspension:
Adjusting the vehicle suspension is dangerous. If the vehicle's height or the
suspension is changed, the vehicle will be unable to accurately detect a collision
resulting in incorrect or unexpected air bag deployment and the possibility of serious
injuries.
Do not modify the supplemental restraint system:
Modifying the components or wiring of the supplemental restraint system is
dangerous. You could accidentally activate it or make it inoperable. Do not make any
modifications to the supplemental restraint system. This includes installing trim,
badges, or anything else over the air bag modules. It also includes installing extra
electrical equipment on or near system components or wiring. An Authorized Mazda
Dealer can provide the special care needed in the removal and installation of front
seats. It is important to protect the air bag wiring and connections to assure that the
bags do not accidentally deploy, the driver seat slide position sensor and front
passenger seat weight sensors are not damaged and that the seats retain an
undamaged air bag connection.
NOTE
l
When an air bag deploys, a loud inflation noise can be heard and some smoke will be
released. Neither is likely to cause injury, however, the texture of the air bags may
cause light skin injuries on body parts not covered with clothing through friction.
l
Should you sell your Mazda, we urge you to tell the new owner of its air bag systems
and that familiarization with all instructions about them, from the Owner's Manual, is
important.
2-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page46
Thursday, August 25 2005 4:54 PM
Black plate (46,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint System Components
The supplemental restraint systems (SRS) have two basic subsystems:
l
The air bag system with inflators and air bags.
l
The electrical system with crash sensors and diagnostic module.
The air bags are mounted in the following locations:
l
The steering wheel hub
l
The front passenger dashboard
l
The outboard sides of the front seatbacks
l
The front and rear window pillars, and the roof edge along both sides
The air bags are out of sight until activated.
2-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page47
Thursday, August 25 2005 4:54 PM
Black plate (47,1)
Essential Safety Equipment
SRS Air Bags
qFront Air Bag System Components
(2)
(3)
(4)
(1)
(6)
(5)
(10)
(9)
(8)
(6)
(7)
(1) Driver seat slide position sensor (page 2-37)
(2) Front seats
(3) Front dual stage inflators and air bags
(4) Front air bag sensor
(5) Front passenger air bag deactivation indicator light (page 2-37)
(6) Front seat belt pretensioner and load limiting systems (page 2-14)
(7) Front passenger seat weight sensors (page 2-37)
(8) Front passenger seat weight sensor control module
(9) Crash sensors and diagnostic module (SAS unit)
(10) Driver and front passenger seat belt buckle switches (page 2-37)
2-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page48
Thursday, August 25 2005 4:54 PM
Black plate (48,1)
Essential Safety Equipment
SRS Air Bags
qSide and Curtain Air Bag System Components
(1)
(2)
(4)
(1)
(3)
(1) Side and curtain inflators and air bags
(2) Front seats
(3) Side crash sensor
(4) Crash sensors and diagnostic module (SAS unit)
2-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page49
Thursday, August 25 2005 4:54 PM
Black plate (49,1)
Essential Safety Equipment
SRS Air Bags
How the Air Bags Work
qHow the Front Air Bags Work
When air bag crash sensors detect a frontal impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the front air bags and after the inflation, the front air bags
quickly deflate.
The front air bags will function only once. After that, the front air bags will not work
again and must be replaced.
Only an Authorized Mazda Dealer can replace the system components.
The front, dual stage air bags control air bag inflation in two energy stages. During an
impact of moderate severity the front air bags deploy with lesser energy, whereas during
more severe impacts, they deploy with more energy. Deployment of the front air bags may
differ between the driver and the front passenger depending on the driver seat position,
front passenger weight and front seat belt usage, all of which provide data from each sensor
to the air bag system.
The front air bags will deploy only
in a frontal or frontal offset impact.
Driver seat slide position sensor
Your vehicle is equipped with a driver seat slide position sensor as a part of the
supplemental restraint system. The sensor is located under the driver seat. The sensor
determines whether the driver seat is fore or aft of a reference position and sends the seat
position to the diagnostic module (SAS unit). The sensor is also designed to control the
deployment of the driver air bag depending on how close the driver seat is to the steering
wheel.
The air bag/front seat belt pretensioner system warning light flashes if the sensor has a
possible malfunction (page 2-46).
2-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page50
Thursday, August 25 2005 4:54 PM
Black plate (50,1)
Essential Safety Equipment
SRS Air Bags
Front passenger seat weight sensors
Your vehicle is also equipped with the front passenger air bag deactivation indicator light
sensors determine the total seated weight on the front passenger seat. The sensors are also
designed to prevent the front passenger front and side air bags and seat belt pretensioner
system from deploying if the total seated weight is less than approximately 30 kg (66 lb).
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
system deactivates the front passenger front and side air bags and also the seat belt
pretensioner system when:
l
There is no passenger in the front passenger seat. (The front passenger air bag
deactivation indicator light does not illuminate.)
l
The total seated weight on the front passenger seat is less than approximately 30 kg (66
lb). (The front passenger air bag deactivation indicator light illuminates.)
This system shuts off the front passenger front and side air bags and seat belt pretensioner
system, so make sure the front passenger air bag deactivation indicator light illuminates
according to the following table.
The air bag/front seat belt pretensioner system warning light flashes and the front
passenger air bag deactivation indicator light illuminates if the sensors have a possible
malfunction. If this happens, the front passenger front and side air bags and seat belt
pretensioner system will not deploy.
Front passenger air bag deactivation indicator light
This indicator light illuminates to remind you that the front passenger front and side air
bags and seat belt pretensioner will not deploy during a collision.
If the front passenger weight sensors are normal, the indicator light illuminates when the
ignition switch is turned to the ON position. After about 6 seconds it goes out.
2-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page51
Thursday, August 25 2005 4:54 PM
Black plate (51,1)
Essential Safety Equipment
SRS Air Bags
The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:
Front passenger seat
Total seated weight on the Front passenger air bag Front passenger front and
belt pretensioner
system
front passenger seat
deactivation indicator light
side air bags
Empty (Not occupied)*
OFF
ON
OFF
OFF
Less than approx. 30 kg
(66 lb)
OFF
OFF
Approx. 42 kg (93 lb) or
more
OFF
ON
ON
* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,
however this does not indicate a malfunction.
If the front passenger air bag deactivation indicator light does not illuminate when the
ignition switch is turned to the ON position and does not illuminate as indicated in the
above chart, do not allow a child to sit in the front passenger seat and consult an
Authorized Mazda Dealer as soon as possible. The system may not work properly in an
accident.
2-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page52
Thursday, August 25 2005 4:54 PM
Black plate (52,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not decrease the total seated weight on the front passenger seat:
When an adult or large child sits on the front passenger seat, decreasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 42 kg (93 lb) required for air bag deployment is dangerous. The front
passenger seat weight sensors will detect the reduced total seated weight condition and
the front passenger front and side air bags and seat belt pretensioner system will not
deploy during an accident. The front passenger will not have the supplementary
protection of the air bag, which could result in serious injury. Decreasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 42 kg (93 lb) could result in an air bag not deploying under the
following conditions, for example:
l
A rear passenger pushes up on the front passenger seat with the feet.
Luggage or other items placed under the front passenger seat or between the front
l
passenger seat and driver seat that push up the front passenger seat bottom.
The front passenger seat occupant sits in a manner that does not place the entire
l
weight of the occupant on the seat such as by sitting too close to the door, grasping
the assist grip or the rim of the moonroof and sitting with the seatback reclined too
far.
l
Any accessories which might decrease the total seated weight on the front
passenger seat are attached to the front passenger seat.
Tension in the upward direction is placed on the seat belt slide bar such as by
l
pulling up on the seat belt.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)
and they will reactivate before the weight exceeds 42 kg (93 lb).
2-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page53
Thursday, August 25 2005 4:54 PM
Black plate (53,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not increase the total seated weight on the front passenger seat:
When an infant or small child sits on the front passenger seat, increasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 30 kg (66 lb) is dangerous. The front passenger seat weight sensors will
detect the increased total seated weight, which could result in the unexpected
deployment of the front passenger front and side air bags and seat belt pretensioner
system in an accident and serious injury. Increasing the total seated weight on the
front passenger seat beyond the total seated weight of approximately 30 kg (66 lb)
could result in the front passenger front and side air bags and seat belt pretensioner
system deployment in an accident under the following conditions, for example:
l
Luggage or other items are placed on the seat with the child in the child-restraint
system.
l
A rear passenger or luggage push or pull down on the front passenger seatback.
A rear passenger steps on the front passenger seat rails with the feet.
Luggage or other items are placed on the seatback or hung on the head restraint.
The seat is washed.
Liquids are spilled on the seat.
The front passenger seat is moved backward, pushing into luggage or other items
l
l
l
l
l
placed behind it.
The front passenger seatback contacts the rear seat.
Luggage or other items are placed between the front passenger seat and driver seat.
Any accessories which might increase the total seated weight on the front passenger
l
l
l
seat are attached to the front passenger seat.
Feet or other items are placed on the seat belt slide bar.
l
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)
and they will reactivate before the weight exceeds 42 kg (93 lb).
2-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page54
Thursday, August 25 2005 4:54 PM
Black plate (54,1)
Essential Safety Equipment
SRS Air Bags
CAUTION
l
To assure proper deployment of the front air bag and to prevent damage to the sensors
in the front seat bottoms:
l
Do not place sharp objects on the front seat bottoms or leave heavy luggage on
them.
l
Do not spill any liquids on the front seats or under the front seats.
l
To allow the sensors to function properly, always perform the following:
l
Adjust the front seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
If you place your child on the front passenger seat, secure the child-restraint system
l
properly and slide the front passenger seat as far back as possible (page 2-26).
NOTE
l
The system requires about 10 seconds to alternate between turning the front passenger
front and side air bags and seat belt pretensioner system on or off.
l
The front passenger air bag deactivation indicator light may illuminate repeatedly if
luggage or other items are put on the front passenger seat, or if the temperature of the
vehicle's interior changes suddenly.
l
l
The front passenger air bag deactivation indicator light may illuminate for 10 seconds
if the total seated weight on the front passenger seat changes.
If the front passenger air bag deactivation indicator light does not illuminate after
installing a child-restraint system on the front passenger seat, install the child-restraint
system on the rear seat and consult an Authorized Mazda Dealer as soon as possible.
Driver and front passenger buckle switches
The buckle switches on the front seat belts detect whether or not the front seat belts are
securely fastened and further control the deployment of the air bags.
2-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page55
Thursday, August 25 2005 4:54 PM
Black plate (55,1)
Essential Safety Equipment
SRS Air Bags
qHow the Side and Curtain Air Bags Work
When air bag crash sensors detect a side impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the side and curtain air bags and after the inflation, the side
and curtain air bags quickly deflate.
The side and curtain air bags will function only once. After that, the side and curtain air
bags will not work again and must be replaced. Only an Authorized Mazda Dealer can
replace the systems.
The side and curtain air bags will deploy only on the side the
vehicle receives the force of the impact.
WARNING
Do not place luggage or other objects under the front seats:
Placing luggage or other objects under the front seats is dangerous. The side and
curtain air bag wiring could be damaged, and in the event of a side collision, the side
and curtain air bags may not deploy, which could result in death or serious injury. To
prevent damage to the side and curtain air bag wiring, do not place luggage or other
objects under the front seats.
qAir Bag Activation/Deactivation
NOTE
If the front passenger seat weight sensors detect a total seated weight on the front
passenger seat is less than approximately 42 kg (93 lb), the front passenger front and side
may deploy.
2-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page56
Thursday, August 25 2005 4:54 PM
Black plate (56,1)
Essential Safety Equipment
SRS Air Bags
l
Front air bag activation
Driving into a big hole or hitting the far
side of a hole.
The front air bags will inflate if the
severity of impact is above the designed
threshold level.
l
Hitting a solid wall straight on at
greater than about 22 km/h (14 mph).
Limitations to front air bag activation
Depending on the severity of impact, the
front air bags may not inflate in the
following cases:
l
l
Hitting a curb, pavement edge or hard
Impacts involving trees or poles cause
object.
severe cosmetic damage but may not
have enough stopping force to activate
the air bag.
l
Landing hard or the vehicle falling.
l
Frontal offset impact to the vehicle
may not provide the stopping force
necessary for air bag deployment.
l
Frontal impact within about a 30
degree range from head-on to the
vehicle.
2-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page57
Thursday, August 25 2005 4:54 PM
Black plate (57,1)
Essential Safety Equipment
SRS Air Bags
l
Rear-ending or running under a truck's
Side and curtain air bag activation
tail gate may not provide the stopping
force necessary for air bag deployment.
The severity of impact above the designed
threshold level to one side of the vehicle
(driver or passenger side areas) will cause
the side and curtain air bags on that side
to inflate, but it will not normally deploy
the front air bags.
Non-activation of front air bags
Front air bags will not normally inflate in
the following cases:
l
Collision from the rear.
Limitations to side and curtain air bag
activation
Depending on the severity of impact, the
side and curtain air bags may not inflate in
the following cases:
l
Frontal offset impact may not provide
enough side impact to deploy the side
and curtain air bags.
l
Impact to the side, but it may deploy
the side and curtain air bags.
l
Side impacts involving trees or poles
can cause severe cosmetic damage but
may not have enough impact force to
activate the side and curtain air bags.
l
Vehicle roll-over, may deploy the side
and curtain air bags but not the front air
bags.
2-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page58
Thursday, August 25 2005 4:54 PM
Black plate (58,1)
Essential Safety Equipment
SRS Air Bags
l
Vehicle roll-over may not provide
enough side force to deploy the side
and curtain air bags.
qConstant Monitoring
The following components of the air bag
systems are monitored by a diagnostic
system:
l
SAS unit
l
Front air bag sensor
l
Air bag modules
l
Side crash sensors
l
Side impacts with two-wheeled
l
Front seat belt pretensioners
vehicles may not provide enough force
to deploy the side and curtain air bags.
l
Related wiring
l
Driver seat slide position sensor
l
Front passenger seat weight sensors
l
Driver and front passenger seat belt
buckle switches
The diagnostic module continuously
monitors the system's readiness. This
begins when the ignition switch is turned
to the ON position and continues while
the vehicle is being driven.
Non-activation of side and curtain air
bag
The side and curtain air bags will not
normally inflate in the following cases:
l
Collision from the rear.
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
l
Collision from the front, but it may
deploy the front air bags.
If the air bag/front seat belt pretensioner
system is normal, the warning light
illuminates when the ignition switch is
turned to the ON position or after the
engine is cranked. After about 6 seconds
it goes out.
2-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page59
Thursday, August 25 2005 4:54 PM
Black plate (59,1)
Essential Safety Equipment
SRS Air Bags
l
A system malfunction is indicated when
the warning light constantly flashes,
constantly illuminates or doesn't
illuminate at all when the ignition switch
is turned to the ON position. If any of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
Front passenger air bag deactivation
indicator light does not illuminate
when the ignition switch is turned to
the ON position or does not illuminate
as indicated in the chart. For more
details about this indicator light and
this chart, refer to “Front passenger
WARNING
WARNING
Self-Servicing the Air Bag/
Pretensioner Systems:
Do not operate a vehicle with damaged
air bag/seat belt pretensioner system
components:
Expended or damaged air bag/seat
belt pretensioner system components
must be replaced after any collision
which caused them to deploy or
damage them. Only a trained
Authorized Mazda Dealer can fully
evaluate these systems to see that they
will work in any subsequent accident.
Driving with an expended or damaged
air bag or pretensioner unit will not
afford you the necessary protection in
the event of any subsequent accident
which could result in serious injury or
death.
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death. Never tamper
with the systems and always have an
Authorized Mazda Dealer perform all
servicing and repairs.
qMaintenance
The air bag systems do not require regular
maintenance. But if any of the following
occurs, take your vehicle to an Authorized
Mazda Dealer as soon as possible:
l
The air bag system warning light
flashes.
Do not remove interior air bag parts:
Removing any components such as the
front seats, front dashboard, the
steering wheel or parts on the front
and rear window pillars and along the
roof edge, containing air bag parts or
sensors is dangerous. These parts
contain essential air bag components.
The air bag could accidentally activate
and cause serious injuries. Always
have an Authorized Mazda Dealer
remove these parts.
l
The air bag system warning light
remains illuminated.
l
The air bag system warning light does
not illuminate when the ignition switch
is turned to the ON position.
l
The air bags have deployed.
2-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page60
Thursday, August 25 2005 4:54 PM
Black plate (60,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Dispose of the air bag properly:
Improper disposal of an air bag or a
vehicle with live air bags in it can be
extremely dangerous. Unless all safety
procedures are followed, injury can
result. Ask an Authorized Mazda
Dealer how to safely dispose of an air
bag or how to scrap an air bag
equipped vehicle.
NOTE
If it becomes necessary to have the
components or wiring system for the
supplementary restraint system
modified to accommodate a person with
certain medical conditions in
accordance with a certified physician,
contact an Authorized Mazda Dealer,
refer to “Customer Assistance (U.S.A.)”
(page 9-2).
2-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page61
Thursday, August 25 2005 4:54 PM
Black plate (61,1)
Knowing Your Mazda
3
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
íSome models.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page62
Thursday, August 25 2005 4:54 PM
Black plate (62,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Advanced Keysí
The advanced keyless functions (advanced keyless entry and start system) enables the
following operations while the advanced key is being carried (page 3-7).
l
Locking/unlocking the doors, opening the trunk lid, without operating the key.
l
Starting the engine without operating the key.
The advanced key enables additional functions other than those with the advanced keyless
functions (page 3-14).
l
The following operations are possible using the keyless entry system from a distance
(Lock/Unlock/Trunk button/Panic button):
l
Locking/unlocking the doors.
Opening the trunk lid.
Turning on the alarm.
l
l
l
Locking/unlocking the doors, opening the trunk lid, or starting the engine using the
auxiliary key.
WARNING
Keys and Children:
Leaving children in a vehicle with the key is dangerous. This could result in someone
being badly injured or even killed. These new kinds of keys are fascinating to
children. They could play with power windows or other controls, or even make the
vehicle move. Don't leave the keys in your vehicle with children and keep them in a
place where your children will not find or play with them.
Use of Advanced Key Near Medical Equipment:
Radio waves from the advanced key may affect medical equipment such as
pacemakers. Before using the advanced key near people who use medical equipment,
ask the medical equipment manufacturer or your physician if radio waves from the
advanced key will affect the equipment.
NOTE
l
The driver must carry the advanced key to ensure the system functions properly.
l
starting.
l
(With theft-deterrent system)
prevention of vehicle and vehicle contents theft.
3-2
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page63
Thursday, August 25 2005 4:54 PM
Black plate (63,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Panic button
Lock button
Unlock button
Trunk button
Auxiliary key
Operation indicator light
Key code number plate
A code number is stamped on the plate attached to the key set; detach this plate and store it
in a safe place (not in the vehicle) for use if you need to make a replacement key.
Also write down the code number and keep it in another safe and handy place, but not in
the vehicle.
If your key is lost, consult your Authorized Mazda Dealer with the code number ready.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page64
Thursday, August 25 2005 4:54 PM
Black plate (64,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
CAUTION
l
Because the advanced key uses low-intensity radio waves, it may not function
correctly under the following conditions:
l
The advanced key is carried with communication devices such as cellular phones.
The advanced key contacts or is covered by a metal object.
The advanced key is near electronic devices such as personal computers.
Non-Mazda genuine electronic equipment is installed in the vehicle.
There is equipment which discharges radio waves near the vehicle.
If the vehicle is near equipment such as wireless pay devices installed at certain gas
l
l
l
l
l
stations.
l
l
The advanced key may consume battery power excessively if it receives high-
intensity radio waves. Do not place the advanced key near electronic devices such as
televisions or personal computers.
To avoid damage to the advanced key, DO NOT:
l
Drop the advanced key.
Get the advanced key wet.
Disassemble the advanced key.
Expose the advanced key to high temperatures on places such as the dashboard or
l
l
l
hood, under direct sunlight.
Place heavy objects on the advanced key.
Put the advanced key in an ultrasonic cleaner.
Put any magnetized objects close to the advanced key.
l
l
l
NOTE
l
Battery life is about one year. Replace the battery when the KEY indicator light
(green) flashes in the instrument cluster.
Refer to Advanced Key Dead Warning on page 3-19.
l
Additional advanced keys can be obtained at an Authorized Mazda Dealer. Up to 6
advanced keys can be used with the advanced keyless functions per vehicle.
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page65
Thursday, August 25 2005 4:54 PM
Black plate (65,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Replacing the battery at an Authorized
Mazda Dealer is recommended to prevent
damage to the advanced key. If replacing
the battery by yourself, follow the
instruction below.
qAdvanced Key Maintenance
CAUTION
l
Make sure the battery is installed
with the correct pole facing upward.
Battery leakage could occur if it is
not installed correctly.
Replacing the advanced key battery
1. Pull out the auxiliary key.
l
When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also be
careful not to get dirt in the
transmitter as it could be damaged.
l
There is the danger of explosion if
the battery is not correctly replaced.
l
Replace only with the same type
battery (CR2025 or equivalent).
l
Dispose of used batteries according
to the following instructions.
2. Release the cap using a flathead
screwdriver, then rotate and remove the
cap.
l
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
l
l
Never throw the battery into fire
or water.
Never deform or crush.
l
The following conditions indicate that the
battery power is low:
Cap
l
The KEY indicator light (green) flashes
in the instrument cluster when the
engine is turned off.
l
The system does not operate and the
operation indicator light does not flash
when the buttons are pressed.
CAUTION
Do not turn the cap excessively. The
cap may be damaged.
l
The system's operational range is
reduced.
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page66
Thursday, August 25 2005 4:54 PM
Black plate (66,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
3. Insert a flathead screwdriver into the
crack and press the battery out.
qService
If you have a problem with the advanced
keyless functions, consult an Authorized
Mazda Dealer.
If your advanced key is lost or stolen,
bring all remaining advanced keys to an
Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen advanced key
inoperative.
CAUTION
4. Insert the new battery (CR2025 or
equivalent) with the positive pole (
facing the ( ) mark on the cap.
Radio equipment like this is governed
by laws in the United States.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
)
5. Rotate and close the cap.
Cap
6. Reinsert the auxiliary key.
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page67
Thursday, August 25 2005 4:54 PM
Black plate (67,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Opening the trunk lid
Operation Using Advanced
Keyless Functions
The operational range for opening the
trunk lid is up to 80 cm (2.6 ft) from the
center of the trunk lid.
qOperational Range
The system operates only when the driver
is in the vehicle or within operational
range while the advanced key is being
carried.
Exterior transmitter
NOTE
When the battery power is low, or in
places where there are high-intensity
radio waves or noise, the operational
range may become narrower or the
system may not operate.
Operational range
Starting the engine
The operational range for starting the
engine includes nearly the entire cabin
area.
Locking, unlocking the doors
The operational range for locking/
unlocking the doors is up to 80 cm (2.6 ft)
from the center of the front door handles.
Interior transmitter
Exterior transmitter
Operational range
Operational range
NOTE
The system may not operate if you are
too close to the windows, door handles.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page68
Thursday, August 25 2005 4:54 PM
Black plate (68,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
qLocking, Unlocking the Doors
NOTE
with Request Switch
l
The trunk is out of the operational
All doors can be locked/unlocked by
pressing the request switch on the front
doors while the advanced key is being
carried.
range, however, starting the engine
may be possible.
l
The engine may not start if the
advanced key is placed in the
following areas:
l
Around the dashboard
In the storage compartments such
l
as the glove box
On the rear parcel shelf
l
Request switch
l
Starting the engine may be possible
even if the advanced key is outside
of the vehicle and extremely close to
a door and window, however, always
start the engine from the driver's seat.
If the vehicle is started and the
To lock
advanced key is not in the vehicle,
the vehicle will not restart after it is
shut off and the ignition switch is
turned to the lock position.
To lock the doors, press the request
switch. A beep sound will be heard once
and the hazard warning lights will flash
once.
l
If the advanced key is detected
within operational range, the
operation indicator light flashes
momentarily.
To unlock
Driver's door request switch
To unlock the driver's door, press the
request switch. A beep sound will be
heard twice and the hazard warning lights
will flash twice.
To unlock all doors , press the request
switch again within 3 seconds and two
more beep sounds will be heard.
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page69
Thursday, August 25 2005 4:54 PM
Black plate (69,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
NOTE
NOTE
l
(Without theft-deterrent system)
The hazard warning lights will flash
twice to indicate that the doors are
unlocked.
The setting can be changed so that
the doors are locked automatically
without pressing the request switch.
(Auto-lock function)
(With theft-deterrent system)
A beep sound is heard when all
doors are closed while the advanced
key is being carried. All doors are
locked automatically after about 3
seconds when the advanced key is
out of the operational range. Also,
the hazard warning lights flash once.
(Even if the driver is in the
l
The hazard warning lights will not
flash.
l
The hazard warning lights only flash
when the theft deterrent system is
armed or turned off, refer to the
theft-deterrent system (page 3-51).
operational range, all doors are
locked automatically after about 30
seconds.)
If you are out of the operational
range before the doors are
completely closed, the auto-lock
function will not work. Always make
sure that all doors are locked before
leaving the vehicle (page 3-20).
Front passenger door request switch
To unlock the doors, press the request
switch. A beep sound will be heard twice
and the hazard warning lights will flash
twice.
NOTE
l
After unlocking all doors by pressing
the request switch, all doors will
automatically lock if any of the
following operations are not
performed within about 30 seconds.
If your vehicle has a theft-deterrent
system, the hazard warning lights
will flash for confirmation.
l
Confirm that all doors are securely
locked.
l
All doors cannot be locked when any
door is open.
l
A beep sound is heard for
confirmation when the doors are
locked/unlocked using the request
switch. If your prefer, the beep sound
can be turned off (page 3-20).
l
A door is opened.
The auxiliary key is inserted into
l
the ignition switch.
The start knob is pushed.
l
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page70
Thursday, August 25 2005 4:54 PM
Black plate (70,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
LOCK(Released)
qOpening the Trunk Lid with
Request Switch
The steering wheel locks to help protect
against theft.
The trunk lid can be opened by pressing
the request switch on the under side of the
trunk lid above the license plate while the
advanced key is being carried.
LOCK(Depressed)
The ignition switch can be turned to the
ACC position when the KEY indicator
light (green) illuminates in the instrument
cluster.
Request switch
WARNING
Not Setting the Parking Brake:
Leaving the driver's seat without
setting the parking brake is
dangerous. Unexpected vehicle
movement could occur if the parking
brake is not set. This could cause an
accident. Before leaving the driver's
seat, always set the parking brake and
make sure the shift lever is in P with
an automatic transmission or in 1 or R
with a manual transmission.
NOTE
If the advanced key is left in the trunk,
the trunk lid will close. However, the
trunk lid can be opened by pressing the
request switch.
NOTE
qStarting the Engine
l
If turning the ignition switch is
difficult, jiggle the steering wheel
from side to side.
Ignition Switch Positions
Without a traditional key, some of the
ignition switch functions are different.
l
(Automatic transmission)
The ignition switch cannot be turned
from the ACC position to the LOCK
position when the shift lever is not in
P.
ACC(Accessory)
Start knob
The steering wheel unlocks and some
electrical accessories will operate.
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page71
Thursday, August 25 2005 4:54 PM
Black plate (71,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Starting the Engine
NOTE
The Advanced Keyless Entry System
does not function in the ACC position,
and the doors will not lock/unlock even
if they have been locked manually or
the advanced key is carried away from
the vehicle.
NOTE
l
Engine-starting is controlled by the
spark ignition system.
This system meets all Canadian
Interference-Causing Equipment
Standard requirements regulating the
impulse electrical field strength of
radio noise.
ON
This is the normal running position after
the engine is started. The warning lights
(except brakes) should be inspected
before the engine is started (page 5-38).
l
The advanced key must be carried
because the advanced key carries an
immobilizer chip that must
communicate with the engine
controls at short range.
NOTE
l
When starting the engine, be sure the
start knob is securely attached before
trying to operate it. If the knob
becomes detached from the ignition
switch, re-attach it by pushing it on
to the ignition switch.
When the ignition switch is turned to
the ON position, the sound of the fuel
pump motor operating near the fuel
tank can be heard. This does not
indicate an abnormality.
START
The engine is started in this position. It
will crank until you release the start knob;
then it returns to the ON position. The
brake warning light can be checked after
the engine is started (page 5-38).
1. Make sure the advanced key is being
carried.
2. Occupants should fasten their seat
belts.
3. Make sure the parking brake is on.
4. Depress the brake pedal.
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page72
Thursday, August 25 2005 4:54 PM
Black plate (72,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
5. (Manual transmission)
7. Verify that the KEY indicator light
(green) illuminates in the instrument
cluster. The KEY warning light (red)
means you cannot continue to start the
engine (page 3-21).
Depress the clutch pedal all the way
and shift into neutral.
Keep the clutch pedal depressed while
cranking the engine.
(Automatic transmission)
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
NOTE
(Manual transmission)
The starter will not operate if the clutch
pedal is not depressed all the way.
(Automatic transmission)
The starter will not operate if the shift
lever is not in P or N.
NOTE
In the following cases, the KEY
warning light (red) illuminates and the
engine will not start.
l
The advanced key battery is dead.
6. Push the start knob slowly all the way
in.
l
The advanced key is out of
operational range.
l
The advanced key is placed in areas
where it is difficult for the system to
detect the signal (page 3-7).
l
A key from another manufacturer
similar to the advanced key is in the
operational range.
3-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page73
Thursday, August 25 2005 4:54 PM
Black plate (73,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
8. Turn the ignition switch to the ACC
position while pushing the start knob
in.
Turning off the engine
1. Shift the shift lever to the P position
(Automatic transmission).
2. Turn the ignition switch from the ON
position to the ACC position.
NOTE
When the engine is turned off and the
ignition switch it turned from the ACC
position to the LOCK position, the
KEY indicator light (green) flashes in
the instrument cluster for about 30
seconds if the battery power of the
advanced key is low. Replace the
battery with a new one.
9. Turn the ignition switch from the ACC
position to the START position and
hold (up to 10 seconds at a time) until
the engine starts.
Refer to Battery Replacement (page
3. Push in the start knob from the ACC
position and turn it to the LOCK
position.
CAUTION
Don't try the starter for more than 10
seconds at a time. If the engine stalls or
fails to start, wait 10 seconds before
trying again. Otherwise, you may
CAUTION
When leaving the vehicle, make sure
the ignition switch is turned to the
LOCK position.
damage the starter and drain the battery.
10. After starting the engine, let it idle for
about 10 seconds.
NOTE
l
In extremely cold weather, below
18° C (0° F), or after the vehicle
_
has not been driven in several days,
let the engine warm up without
operating the accelerator.
l
Whether the engine is cold or warm,
it should be started without use of
the accelerator.
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page74
Thursday, August 25 2005 4:54 PM
Black plate (74,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
NOTE
Operation Using Advanced
Key Functions
l
When turning the ignition switch to
the LOCK position, the ignition
switch has to be pushed in from the
ACC position and turned. Without
being pushed in, the ignition switch
stops at the ACC position and the
vehicle battery may be discharged if
the ignition switch is left in the ACC
position. When leaving the vehicle,
make sure the ignition switch is
turned to the LOCK position.
qKeyless Entry System
This system remotely locks and unlocks
the doors and opens the trunk lid.
It can also help you signal for attention.
Operating the theft-deterrent system is
also possible on theft-deterrent system-
equipped vehicles.
Press the button slowly and carefully.
l
If the vehicle is left with the ignition
switch not in the LOCK position, a
beep sound is heard and the indicator
light flashes to notify the driver.
NOTE
l
The keyless entry system is designed
to operate up to about 2.5 m (8 ft)
from the center of the vehicle, but
this may vary due to local
conditions.
Refer to Warning Beep (page 3-18).
l
The system does not operate when
the ignition switch is not in the
LOCK position or the start knob is
pushed in.
l
With the start knob installed in the
LOCK position, the system is fully
operational. If the ignition switch is
not in the LOCK position or the start
knob is pushed in, the system does
not operate.
l
All doors cannot be locked by
pressing the lock button while any
door is open. The hazard warning
lights will also not flash.
l
If the transmitter does not operate
when pressing a button or the
operational range becomes too small,
the battery may be dead. To install a
new battery, refer to Maintenance
(page 3-5).
3-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page75
Thursday, August 25 2005 4:54 PM
Black plate (75,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Transmitter
To confirm that all doors have been
locked, press the lock button again within
5 seconds. If they are closed and locked,
the horn will sound.
Lock button
Panic button
NOTE
Unlock button
Trunk button
(Without theft-deterrent system)
The hazard warning lights will flash
once to indicate that all doors are
locked.
(With theft-deterrent system)
l
The hazard warning lights will not
flash.
NOTE
l
The hazard warning lights only flash
when the theft deterrent system is
l
(U.S.A.)
armed or turned off, refer to the
theft-deterrent system (page 3-51).
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NOTE
l
All doors cannot be locked when any
door is open.
l
Confirm that all doors are locked
visually or audibly by use of the
double click.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
Unlock button
To unlock the driver's door, press the
unlock button. A beep will be heard twice
and the hazard warning lights will flash
twice.
To unlock all doors , press the unlock
button again within 3 seconds and two
more beep sounds will be heard.
The operation indicator light flashes when
the buttons are pressed.
Lock button
To lock the doors, press the lock button. A
beep sound will be heard once and the
hazard warning lights will flash once.
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page76
Thursday, August 25 2005 4:54 PM
Black plate (76,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
(Turning on the alarm)
NOTE
Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
(Without theft-deterrent system)
The hazard warning lights will flash
twice to indicate that all doors are
unlocked.
l
The horn sounds intermittently.
(With theft-deterrent system)
l
The hazard warning lights flash.
l
The hazard warning lights will not
flash.
NOTE
l
The hazard warning lights only flash
However, if the driver is too close to the
vehicle the panic button may not
function.
when the theft deterrent system is
armed or turned off, refer to the
theft-deterrent system (page 3-51).
(Turning off the alarm)
The alarm stops by pressing any button on
NOTE
the transmitter.
After unlocking with the transmitter, all
doors will automatically lock if one of
the doors is not opened within about 30
seconds.
qAuxiliary Key Function
Use the auxiliary key stored in the
advanced key in the event of a dead
battery or malfunction.
Trunk button
To open the trunk, press the trunk button
for more than 1 second.
Removing the auxiliary key
Pull out the auxiliary key from the
advanced key.
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
NOTE
The panic button will work whether any
door is open or closed.
3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page77
Thursday, August 25 2005 4:54 PM
Black plate (77,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Locking, unlocking the doors
Advanced Key Suspend
Function
The doors can be locked/unlocked using
the auxiliary key, refer to Locking,
Unlocking with Key (page 3-29).
If an advanced key is left in the vehicle or
the trunk, the functions of the advanced
key left in the vehicle or the trunk are
temporarily suspended to prevent theft of
the vehicle.
Opening the trunk lid
The trunk lid can be opened using the
auxiliary key, refer to Opening and
Closing the Trunk Lid (page 3-34).
The following are inoperable:
Starting the engine
l
Starting the engine using the start
The engine can be started with the
auxiliary key, refer to Starting the Engine
(page 5-4).
knob.
l
Operating the request switches.
To restore these functions, perform any
one of the following:
l
Press the lock or unlock button on the
advanced key which has had its
functions suspended.
l
While carrying another advanced key,
push in the start knob until the KEY
indicator light (green) illuminates.
l
Insert the auxiliary key and turn the
ignition switch to the ON position.
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page78
Thursday, August 25 2005 4:54 PM
Black plate (78,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
qAdvanced Key Removed from
Warning and Beep Sounds
Vehicle Warning Beep
q
System Malfunction Warning Beep
Under the following conditions, a beep
will be heard 6 times and the KEY
warning light (red) will flash continuously
when the start knob has not been returned
to the LOCK position to notify the driver
that the advanced key has been removed.
The KEY warning light (red) will stop
flashing when the advanced key is back
inside the vehicle:
If any malfunction occurs in the advanced
keyless function, the KEY warning light
(red) in the instrument cluster illuminates
continuously and beep sounds will be
heard.
CAUTION
l
The start knob has not been returned to
If the KEY warning light (red) remains
illuminated, do not continue to drive the
vehicle with the advanced keyless
function. Park the vehicle in a safe
place and use the auxiliary key to
continue driving the vehicle. Have the
vehicle inspected at an Authorized
Mazda Dealer as soon as possible.
Refer to Ignition Switch (page 5-2).
the LOCK position, the driver's door is
open, and the advanced key is removed
from the vehicle.
However the beep will be heard
continuously when the start knob is in
the ACC position and the door is open
due to the activation of the warning
beep indicating that the start knob is
not in the LOCK position.
l
The start knob has not been returned to
qStart Knob Not in LOCK
the LOCK position and all the doors
are closed after removing the advanced
key from the vehicle.
Warning Beep
If the start knob is in the ACC position
and the driver's door is opened, a
continuous beep sound will be heard to
notify the driver that the start knob has not
been returned to the LOCK position. In
this case, the keyless entry system does
not operate.
NOTE
Because the advanced key utilizes low-
intensity radio waves, the Advanced
Key Removed From Vehicle Warning
may activate if the advanced key is
carried together with a metal object or it
is placed in a poor signal reception area.
3-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page79
Thursday, August 25 2005 4:54 PM
Black plate (79,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
l
The advanced key is not within
operational range.
qRequest Switch Inoperable
Warning Beep
l
l
The advanced key is placed in areas
where it is difficult for the system to
detect the signal (page 3-7).
Under the following conditions, if the
request switch for a front door is pressed
while the advanced key is being carried, a
beep will be heard 6 times to indicate that
the front doors cannot be locked.
A key from another manufacturer
similar to the advanced key is in the
operational range.
l
A door is open (door ajar included).
l
The start knob has not been returned to
qAdvanced Key Left-in-trunk
the LOCK position.
Warning Beep
l
The auxiliary key is inserted into the
If the advanced key is left in the trunk
compartment with all doors locked and
the trunk lid closed, a beep sound is heard
for about 10 seconds to remind the driver
the advanced key has been left in the
trunk compartment. If this happens, open
the trunk lid by pressing the request
switch and remove the advanced key. An
advanced key removed from the trunk
may not function because its functions
may have been temporarily suspended. To
restore the advanced key function,
perform the applicable procedure (page
ignition switch.
qAdvanced Key Battery Dead
Warning
When the start knob is returned to the
ACC or LOCK position from the ON
position, the KEY indicator light (green)
flashes for approximately 30 seconds
indicating that the remaining battery
power is low. Replace with a new battery
before the advanced key becomes
unusable.
Refer to Advanced Key Maintenance
(page 3-5).
qAdvanced Key Left-in-vehicle
Warning Beep
NOTE
If an advanced key is left in the vehicle
cabin and all doors are locked using a
separate advanced key, a beep sound is
heard for about 10 seconds to remind the
driver that the advanced key has been left
in the vehicle cabin. If this happens, the
doors lock but the functions of the
advanced key left in the vehicle cabin
may be temporarily suspended. Perform
the following procedure to restore the
functions of the advanced key (page
The advanced key can be set so that the
KEY indicator light (green) does not
flash even if the battery power is low.
Refer to Setting Change (page 3-20).
q
Engine Start Not Permitted Warning
Under the following conditions, the KEY
warning light (red) flashes to inform the
driver that the start knob will not rotate to
the ACC position even if it is pushed in
from the LOCK position.
l
The advanced key battery is dead.
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page80
Thursday, August 25 2005 4:54 PM
Black plate (80,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Setting Change (Function Customization)
The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
At Initial
Setting
After Setting
Change
Setting
Function
Advanced key battery dead KEY indicator light (green) flashes to indicate
Activated
Activated
Deactivated
indicator
that the advanced key battery power is low.
Lock/unlock operation
A beep sound is heard to confirm that all doors or
Deactivated
Activated
confirmation beep sound*1 the trunk lid have been locked/unlocked.
When all doors are closed and the advanced key
is being carried and out of operational range, all
doors automatically lock after 3 seconds.
(Even if the driver is in the operational range, all
Autolock function
Deactivated
doors are locked automatically after about 30 sec-
onds.)
*1 : When the autolock function is operating, the warning sound will be heard regardless of the setting.
3-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page81
Thursday, August 25 2005 4:54 PM
Black plate (81,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
User Mis-Operation Warning Indicators
Under the following conditions, warning beeps are heard and a warning/indicator light in
the instrument cluster illuminates to notify the driver of improper operation of the
advanced key to prevent theft of the vehicle (page 3-18).
Warning condition
Check
When a door is open, a continuous beep sound will be Check whether the start knob has been returned to the
heard.
LOCK position.
When a door is open, 6 beep sounds are heard, and the
KEY warning light (red) in the instrument cluster
flashes.
Check whether the advanced key has been removed
from the vehicle.
When a door is closed, a beep sound is heard 6 times,
and the KEY warning light (red) in the instrument
cluster flashes.
Check whether the advanced key has been removed
from the vehicle.
Check whether the advanced key has been left in the
vehicle.
When attempting to lock the doors, a beep sound is
heard.
Check whether the start knob has been returned to the
LOCK position.
Check whether a door is open.
The advanced key battery power is low. Replace the
battery with a new one.
Refer to Advanced Key Maintenance on page 3-5.
When the KEY indicator light (green) flashes in the
instrument cluster.
The advanced key is malfunctioning. Park the vehicle in
When the KEY warning light (red) remains illuminated a safe place, and use the auxiliary key to continue
in the instrument cluster.
driving the vehicle. Have the vehicle inspected at an
Authorized Mazda Dealer as soon as possible.
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page82
Thursday, August 25 2005 4:54 PM
Black plate (82,1)
Knowing Your Mazda
Doors and Locks
A code number is stamped on the plate
attached to the key set; detach this plate
and store it in a safe place (not in the
vehicle) for use if you need to make a
replacement key.
Keys (without Advanced Key)
WARNING
Keys and Children:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. These new kinds of keys are
fascinating to children. They could
play with power windows or other
controls, or even make the vehicle
move. Don't leave the keys in your
vehicle with children and keep them in
a place where your children will not
find or play with them.
NOTE
Write down the code number and keep
it in a separate safe and convenient
place, but not in the vehicle.
If your key is lost, consult your
Authorized Mazda Dealer and have
your code number ready.
Key extend/retract method (Retractable
type key)
To extend the key, press the release
button.
NOTE
l
Refer to Immobilizer System (page
3-48) for information regarding keys
and engine starting.
l
(With theft-deterrent system)
Refer to Theft-Deterrent System
regarding keys and the prevention of
vehicle and vehicle contents theft.
The keys operate all locks.
Retractable
type key
Key code number plate
3-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page83
Thursday, August 25 2005 4:54 PM
Black plate (83,1)
Knowing Your Mazda
Doors and Locks
To retract the key, rotate it into the holder
while pressing the release button.
Keyless Entry System (with
Retractable Type Key)
This system remotely locks and unlocks
the doors and opens the trunk lid.
It can also help you signal for attention.
Operating the theft-deterrent system with
the keyless entry system transmitter is
also possible on theft-deterrent system-
equipped vehicles.
Press the button slowly and carefully.
CAUTION
To avoid damage to the transmitter, do
not:
l
Drop it.
l
Get it wet.
l
Disassemble it.
l
Expose it to heat or sunlight.
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page84
Thursday, August 25 2005 4:54 PM
Black plate (84,1)
Knowing Your Mazda
Doors and Locks
qTransmitter
NOTE
l
The keyless entry system is designed
Lock button
to operate up to about 2.5 m (8 ft)
from the center of the vehicle, but
this may vary due to local
conditions.
Unlock button
Panic button
l
The system doesn't operate when the
key is in the ignition switch.
Operation
l
indicator light
Doors cannot be locked by pressing
the lock button while any other door
is open. Also, the hazard warning
lights will not flash.
Trunk button
NOTE
l
If the transmitter does not operate
when pressing a button or the
operation range becomes too small,
the battery may be dead. To install a
new battery, refer to Maintenance
(page 3-26).
l
(U.S.A.)
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
l
Additional transmitters can be
obtained at an Authorized Mazda
Dealer. Up to 3 transmitters can be
used with the keyless entry system
per vehicle. Bring all transmitters to
an Authorized Mazda Dealer when
the electronic codes need to be reset.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
The operation indicator light flashes when
the buttons are pressed.
Lock button
To lock the doors, press the lock button
and the hazard warning lights will flash
once.
3-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page85
Thursday, August 25 2005 4:54 PM
Black plate (85,1)
Knowing Your Mazda
Doors and Locks
To confirm that all doors have been
locked, press the lock button again within
5 seconds. If they are closed and locked,
the horn will sound.
NOTE
(Without theft-deterrent system)
The hazard warning lights will flash
twice to indicate that all doors are
unlocked.
NOTE
(With theft-deterrent system)
(Without theft-deterrent system)
The hazard warning lights will flash
once to indicate that all doors are
locked.
l
The hazard warning lights will not
flash.
l
The hazard warning lights only flash
(With theft-deterrent system)
when the theft deterrent system is
armed or turned off, refer to the
theft-deterrent system (page 3-51).
l
The hazard warning lights will not
flash.
l
The hazard warning lights only flash
NOTE
when the theft deterrent system is
armed or turned off, refer to the
theft-deterrent system (page 3-51).
After unlocking with the transmitter, all
doors will automatically lock if one of
the doors is not opened within about 30
seconds.
NOTE
l
All doors cannot be locked when any
Trunk button
door is open and the key is in the
ignition switch.
To open the trunk, press the trunk button
for more than 1 second.
l
Confirm that all doors are locked
visually or audibly by use of the
double click.
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
Unlock button
To unlock the driver's door, press the
unlock button and the hazard warning
lights will flash twice.
NOTE
The panic button will work whether any
door is open or closed.
To unlock all doors, press the unlock
button again within 5 seconds.
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page86
Thursday, August 25 2005 4:54 PM
Black plate (86,1)
Knowing Your Mazda
Doors and Locks
Turning on the alarm
CAUTION
Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
l
l
Install the battery with the positive
pole ( ) facing down. Battery
leakage could occur if it is not
installed correctly.
l
The horn sounds intermittently.
When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also be
careful not to get dirt in the
l
The hazard warning lights flash.
Turning off the alarm
Press any button on the transmitter.
transmitter as it could be damaged.
qTransmitter Maintenance
l
l
l
There is the danger of explosion if
the battery is not correctly replaced.
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
Replace only with the same type
battery (CR1620 or equivalent).
Dispose of used batteries according
to the following instructions.
l
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
l
l
Never throw the battery into fire
and/or water.
Never deform or crush.
l
Replacing the transmitter battery
1. Unfold the key (page 3-22).
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page87
Thursday, August 25 2005 4:54 PM
Black plate (87,1)
Knowing Your Mazda
Doors and Locks
2. Insert a small screwdriver into the slot
and push the tab to remove the key
from the transmitter.
NOTE
If it is difficult to remove the battery by
pressing with a finger, use a small
screwdriver to press out the battery.
Tab
5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
facing down.
)
3. Insert a small screwdriver into the slot
and gently pry open the transmitter.
6. Align the front and back covers and
snap the transmitter shut.
7. Install the key to the transmitter.
qService
If you have a problem with the keyless
entry system, consult an Authorized
Mazda Dealer.
4. Press the portion of the battery
indicated by A and remove the battery.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
A
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page88
Thursday, August 25 2005 4:54 PM
Black plate (88,1)
Knowing Your Mazda
Doors and Locks
Door Locks
CAUTION
Radio equipment like this is governed
by laws in the United States.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
WARNING
Unattended Children and Pets:
Leaving a child or an animal
unattended in a parked vehicle is
dangerous. In hot weather,
temperatures inside a vehicle can
become high enough to cause brain
damage or even death. Always take all
children and animals with you or
leave a responsible person with them.
Keys and Children:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. They could play with power
windows or other controls, or even
make the vehicle move. Don't leave the
keys in your vehicle with children and
keep them in a place where your
children will not find or play with
them.
Unlocked Doors:
Unlocked doors in a moving vehicle
are dangerous. Passengers can fall out
if a door is accidentally opened and
can more easily be thrown out in an
accident. So keep all doors locked
when driving.
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page89
Thursday, August 25 2005 4:54 PM
Black plate (89,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with
WARNING
Transmitter (with Advanced Key)
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-14).
Vehicles Left Unlocked:
Leaving your vehicle unlocked is
dangerous as children could lock
themselves in a hot vehicle, which
could result in death. Also, a vehicle
left unlocked becomes an easy target
for thieves and intruders. Always close
all the windows, lock the doors and
take the key with you when leaving
your vehicle unattended.
q
Locking, Unlocking with Transmitter
(with Retractable Type Key)
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-23).
qLocking, Unlocking with Key
qLocking, Unlocking with Door-
The driver's door can be locked/unlocked
with the key.
Lock Knob
Turn the key toward the front to unlock,
toward the back to lock.
To lock either front door from the inside,
push the door-lock knob.
To unlock, pull it out.
Door-lock knob
Lock
Unlock
Lock
Unlock
qLocking, Unlocking with Request
Switch (with Advanced Key)
The doors can be locked/unlocked by
operating the request switch while
carrying the advanced key outside the
vehicle, refer to Operations Using
Advanced Keyless Functions (page 3-7).
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page90
Thursday, August 25 2005 4:54 PM
Black plate (90,1)
Knowing Your Mazda
Doors and Locks
To lock either front door with the door-
lock knob from the outside, push the
door-lock knob to the lock position and
close the door.
(Without advanced key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. With the key in the ignition
switch, all doors will automatically unlock
if they are locked using the power door
locks with any door open.
Door-lock knob
Locking, unlocking with key
All doors lock automatically when the
driver's door is locked with the key. All
doors unlock when the driver's door is
unlocked and the key is held in the unlock
position for one second or longer.
NOTE
l
(With advanced key)
Unlock
The driver's door cannot be locked
using the door-lock knob from the
outside.
Lock
l
(Without advanced key)
The driver's door cannot be locked
using the door-lock knob from the
outside if the key is in the ignition
switch.
NOTE
l
When locking the doors this way, be
careful not to leave the key inside the
vehicle.
Holding the key in the unlocked
position in the driver's door lock for
about a second unlocks all doors. To
unlock only the driver's door, insert the
key into the driver's door lock and turn
the key briefly to the unlock position
and then immediately return it to the
center position.
qPower Door Locks
Vehicle lock-out prevention
(With advanced key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. All doors will automatically
unlock if they are locked using the power
door locks with any door open.
Locking, unlocking with door-lock
switch
All doors lock automatically when LOCK
is pushed. They all unlock when the
unmarked part of the door-lock switch is
pushed.
3-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page91
Thursday, August 25 2005 4:54 PM
Black plate (91,1)
Knowing Your Mazda
Doors and Locks
Driver's door
Locking, unlocking with transmitter
(with retractable type key)
All doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-23).
Unlock
qFreestyle Doors
The pillarless freestyle doors are front and
rear-hinged for ease of ingress and egress
to the rear seat.
Lock
Opening the freestyle doors
Passenger's door
1. Open the front door first.
Unlock
Lock
Front door
Locking, unlocking with request switch
(with advanced key)
2. Pull the rear door handle and open the
rear door.
All doors can be locked/unlocked by
operating the request switch while
carrying the advanced key outside the
vehicle, refer to Operations Using
Advanced Keyless Functions (page 3-7).
Locking, unlocking with transmitter
(with advanced key)
Rear door handle
All doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-14).
3-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page92
Thursday, August 25 2005 4:54 PM
Black plate (92,1)
Knowing Your Mazda
Doors and Locks
Closing the freestyle doors
CAUTION
1. Close the rear door first, and then close
the front door.
Before closing a front door make sure
other passengers are not operating a
rear door and a rear passenger's head or
hands are away from the rear door. If
the front door is closed while a
passenger is operating the rear door
handle, a hand or fingers could be
injured if the handle is forced back.
Also, a rear passenger could hit their
head against the door during access to
the rear seat.
Front door
Rear door
NOTE
l
The rear door cannot be opened
while the front door is closed.
CAUTION
Before closing a front door make sure
other passengers are not operating a
rear door and a rear passenger's head or
hands are away from the rear door. If
the front door is closed while a
passenger is operating the rear door
handle, a hand or fingers could be
injured if the handle is forced back.
Also, a rear passenger could hit their
head against the door during access to
the rear seat.
l
Make sure the front seatbelt is
unfastened before the rear door is
opened. The rear door can't be
opened with the front seatbelt
fastened because the front seatbelt
may lock.
l
If any door is left open for more than
about an hour, the front seatbelt will
lock, and the rear door cannot be
opened. If this happens, close all
doors and open the rear door again.
l
This vehicle is not equipped with
NOTE
child safety locks due to the design
of the front and rear doors. The rear
doors must be closed before the front
doors, and the rear doors cannot be
opened until the front doors are
opened.
The front door cannot latch or lock
while the rear door is opened.
2. Make sure the freestyle doors are
securely closed.
3-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page93
Thursday, August 25 2005 4:54 PM
Black plate (93,1)
Knowing Your Mazda
Doors and Locks
Trunk Lid
WARNING
Driving with Doors Not Secured:
Driving with the doors not securely
closed is dangerous. If the rear door is
not completely closed, the front door
will not be securely closed. This could
cause the front door to open
unexpectedly while driving and may
result in an accident. Make sure the
rear door is closed securely before
closing the front door.
WARNING
Open Trunk and Exhaust Gas:
Exhaust gas in the cabin of a vehicle
is dangerous. This gas contains CO
(carbon monoxide), which is colorless,
odorless, and highly poisonous. If
inhaled, it can cause loss of
consciousness and death. Because
exhaust gas can get into the cabin
through an open trunk, keep the trunk
closed when driving.
3-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page94
Thursday, August 25 2005 4:54 PM
Black plate (94,1)
Knowing Your Mazda
Doors and Locks
Opening the trunk lid with the key
qOpening and Closing the Trunk
Insert the key into the slot and turn it
clockwise.
WARNING
Trunk Access and Children:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the
trunk lid and climb inside resulting in
possible injury or death from heat
exposure. Close the trunk lid and do
not allow children to play inside the
vehicle.
Open
Unattended Children and Pets:
Leaving children or animals
Opening the trunk lid with the request
switch (with advanced key)
unattended in a parked vehicle is
dangerous. Babies left sleeping and
children who lock themselves in cars
or trunks can die very quickly from
heat prostration. Don't leave your
children or pets alone in a car at any
time. Don't leave the car or the trunk
unlocked. Always keep the car from
being a tempting place to play by
locking doors and the trunk, and
keeping the keys where children can
not play with them.
The trunk lid can be opened by operating
the request switch on the trunk lid while
carrying the advanced key outside the
vehicle, refer to Operations Using
Advanced Keyless Functions (page 3-7).
Opening the trunk lid with the
transmitter (with advanced key)
The trunk lid can be opened by operating
the keyless entry system transmitter, refer
to Keyless Entry System (page 3-14).
Opening the trunk lid with the
transmitter (with retractable type key)
The trunk lid can be opened by operating
the keyless entry system transmitter, refer
to Keyless Entry System (page 3-23).
3-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page95
Thursday, August 25 2005 4:54 PM
Black plate (95,1)
Knowing Your Mazda
Doors and Locks
Opening the trunk lid with the remote
release button
qTrunk Light
The trunk light is on when the lid is open
and off when it's closed.
Push the release button.
Closing the trunk lid
NOTE
Grasp the inner handle and pull the trunk
lid down, then push the trunk lid down
until it locks securely. Be careful not to
slam it. Pull up on the trunk lid to make
sure it is secured.
To prevent the battery from being
discharged, do not leave the trunk open
for a long period when the engine is not
running.
Handle
3-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page96
Thursday, August 25 2005 4:54 PM
Black plate (96,1)
Knowing Your Mazda
Doors and Locks
Inside Trunk Release Lever
WARNING
Your vehicle is equipped with an inside
trunk release lever that provides a means
of escape for children and adults in the
event they become locked inside the
trunk.
Trunk Access and Children:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the
trunk lid and climb inside resulting in
possible injury or death from heat
exposure. Close the trunk lid and do
not allow children to play inside the
vehicle.
No matter how careful adults might be
with keys and locking their cars, parents
should be aware that children may be
tempted to play around vehicles and use
the trunk as a hiding place.
Unattended Children and Pets:
Leaving children or animals
Adults are advised to familiarize
unattended in a parked vehicle is
dangerous. Babies left sleeping and
children who lock themselves in cars
or trunks can die very quickly from
heat prostration. Don't leave your
children or pets alone in a car at any
time. Don't leave the car or the trunk
unlocked. Always keep the car from
being a tempting place to play by
locking doors and the trunk, and
keeping the keys where children can
not play with them.
themselves with the operation and
location of the inside trunk release lever
so that all children can be told about it in
an appropriate way, keeping in mind that
most vehicles don't have such levers.
3-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page97
Thursday, August 25 2005 4:54 PM
Black plate (97,1)
Knowing Your Mazda
Doors and Locks
qOpening the Trunk Lid from the
Power Windows
Inside
The ignition switch must be in the ON
position for the power windows to
operate.
Slide the inside trunk release lever in the
direction of the arrow. The lever is made
of material that will glow for hours in the
darkness of the trunk following a brief
exposure to ambient light.
WARNING
The inside trunk release lever is located
on the inside of the trunk end trim.
Closing Power Windows:
Closing power windows are
dangerous. A person's hands, head, or
even neck could be caught by the
window and result in serious injury or
even death.
This warning applies especially to
children. Make sure the opening is
clear before closing a window.
Children and Power Windows:
Leaving the power window switches
unlocked while children are in the
vehicle is dangerous. Power window
switches that are not locked with the
power window lock switch would allow
children to operate power windows
unintentionally which could result in
serious injury if a child's hands, head
or neck becomes caught by the
window. Always lock all passenger
power windows with the power
window lock switch on the driver's
side while children are in the vehicle,
and never allow children to play with
power window switches.
3-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page98
Thursday, August 25 2005 4:54 PM
Black plate (98,1)
Knowing Your Mazda
Doors and Locks
qOperating the Driver's Side
qOperating the Passenger Power
Power Window
Windows
Manual opening/closing
The power window may be operated
when the power window lock switch on
the driver's door is in the unlocked
position.
To open the window to the desired
position, lightly hold down the switch.
To close the window to the desired
position, lightly pull up the switch.
The passenger window may be opened or
closed by the power window master
control switches on the driver's door.
Power window lock switch
Open
Close
Left front window
Auto-opening
Right front window
To fully open the window automatically,
press the switch completely down.
To open the window to the desired
position, hold down the switch.
To close the window to the desired
position, pull up the switch.
To stop the window partway, lightly pull
up the switch and then release it.
Open
Close
3-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page99
Thursday, August 25 2005 4:54 PM
Black plate (99,1)
Knowing Your Mazda
Doors and Locks
qPower Window Lock Switch
Rear Quarter Windows
With the lock switch in the unlocked
position, all power windows on each door
can be operated.
Open or close a swing-out rear quarter
window by releasing the latch and moving
the window.
With the lock switch in the locked
position, only the driver's side power
window can be operated.
NOTE
When parked in public areas, it is best
to keep the rear quarter windows closed
for security.
Locked position
qOpening a Window
Pull the latch inward and then push the
window outward.
Unlocked position
WARNING
Unintentional Window Operation:
Unintentional power window
operation is dangerous. A person's
hands, head, or neck could be caught
by the window and result in serious
injury. Unless a passenger needs to
operate a power window, keep the
power window lock switch in the
locked position.
3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page100
Thursday, August 25 2005 4:54 PM
Black plate (100,1)
Knowing Your Mazda
Doors and Locks
qClosing a Window
Fuel-Filler Lid and Cap
Pull the latch inward and then push it
backward until it snaps shut. Make sure
the window is securely closed.
WARNING
Fuel Spray:
Fuel spray is dangerous. Fuel can
burn skin and eyes and cause illness if
ingested. Fuel spray is released when
there is pressure in the fuel tank and
the fuel cap is removed too quickly.
When removing the fuel cap, loosen
the cap slightly and wait for any
hissing to stop. Then remove it.
Fuel Vapor:
Fuel vapor is dangerous. It could be
ignited by sparks or flames causing
serious burns and injuries. Before
refueling, stop the engine, and always
keep sparks and flames away from the
filler neck. Additionally, use of the
incorrect fuel filler cap or not using a
fuel filler cap may result in fuel leak,
which could result in serious burns or
death in an accident.
CAUTION
Always use only a genuine Mazda fuel
cap or an approved equivalent,
available at an Authorized Mazda
Dealer. The wrong cap can result in a
serious malfunction of the fuel and
emission control systems. It may also
cause the check engine light in the
instrument cluster to illuminate.
3-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page101
Thursday, August 25 2005 4:54 PM
Black plate (101,1)
Knowing Your Mazda
Doors and Locks
qFuel-Filler Lid
CAUTION
To open, pull up the remote fuel-filler lid
release.
Make sure the fuel-filler cap is
tightened securely. The check engine
light may illuminate when the cap isn't
tightened securely. If the light remains
on (even after you have tightened the
cap securely, driven, and restarted the
engine several times), it may indicate a
different problem. Contact an
Authorized Mazda Dealer as soon as
possible.
Remote fuel-filler
lid release
qFuel-Filler Cap
To remove the filler cap, turn it
counterclockwise.
To close the filler cap, turn it clockwise
until it clicks.
Open
Close
3-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page102
Thursday, August 25 2005 4:54 PM
Black plate (102,1)
Knowing Your Mazda
Doors and Locks
2. Slide the hood latch to the right and lift
the hood.
Hood
WARNING
Closed and Securely Locked Hood:
A hood that is not closed and securely
locked is dangerous as it could fly
open while the vehicle is moving and
block the driver's vision which could
result in a serious accident. Always
check that the hood is closed and
securely locked.
3. Grasp the support rod and secure it in
the stay hole indicated by the arrow to
hold the hood open.
qOpening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
Clip
Release handle
Support rod
qClosing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Insert the support rod in its clip while
holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
3. Close the hood so that it locks securely.
3-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page103
Thursday, August 25 2005 4:54 PM
Black plate (103,1)
Knowing Your Mazda
Doors and Locks
Moonroofí
NOTE
After washing your Mazda or after a
rain, wipe the water off the moonroof
before operating it to avoid water
penetration which could cause rust and
water damage to your headliner.
The moonroof can be opened or closed
electrically only when the ignition switch
is in the ON position.
Slide switch
qTilt Operation
The rear of the moonroof can be tilted
open to provide more ventilation.
To fully tilt automatically, push the rear of
the tilt switch.
To stop tilting partway, push any part of
the tilt or slide switch.
Tilt switch
To close to the desired position, push the
front of the tilt or slide switch.
WARNING
Extending the Head or Arms Through
the Moonroof:
Extending the head, arms, or other
parts of the body through the
moonroof is dangerous. The head or
arms could hit something while the
vehicle is moving. This could cause
serious injury or death. Don't let
passengers stand up or extend
anything through the open moonroof
while the vehicle is moving.
Tilt up
Close
Close
Closing the Moonroof:
qSlide Operation
A closing moonroof is dangerous. The
hands, head, or even neck of a person
―especially a child― could be caught
in it as it closes, causing serious injury
or even death. Make sure the opening
is clear before closing the moonroof.
To fully open automatically, push the rear
of the slide switch.
To stop sliding partway, push any part of
the tilt or slide switch.
íSome models.
3-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page104
Thursday, August 25 2005 4:54 PM
Black plate (104,1)
Knowing Your Mazda
Doors and Locks
To close to the desired position, push the
front of the tilt or slide switch.
Open
Close
Close
qSunshade
The sunshade can be opened and closed
by hand.
The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.
Sunshade
CAUTION
The sunshade doesn't tilt. To avoid
damaging the sunshade, don't push up
on it.
3-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page105
Thursday, August 25 2005 4:54 PM
Black plate (105,1)
Knowing Your Mazda
Security System
Immobilizer System (with
Advanced Key)
CAUTION
Do not allow the following when
starting the engine with the auxiliary
key due to an advanced key dead
battery or other malfunction. Otherwise
the signal from the auxiliary key will
not be received correctly and the engine
may not start.
The immobilizer system allows the engine
to start only with an advanced key the
system recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
l
Metal parts of other keys or metal
objects touch the key grip.
l
Spare auxiliary keys or keys for
other vehicles equipped with an
immobilizer system touch or come
near the auxiliary key.
CAUTION
l
Radio equipment like this is
governed by laws in the United
States.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
l
Equipment containing electronic
components or cards with magnetic
strips such as credit cards come near
the auxiliary key.
NOTE
l
To avoid damage to the key, do not:
l
(U.S.A.)
l
Drop the key.
Get the key wet.
Expose the key to any kind of
magnetic field.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
l
l
l
Expose the key to high
temperatures on places such as the
dashboard or hood, under direct
sunlight.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
3-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page106
Thursday, August 25 2005 4:54 PM
Black plate (106,1)
Knowing Your Mazda
Security System
qOperation
NOTE
Arming
l
The engine may not start and the
security indicator light may
The system is armed when the ignition
switch is turned from the ON position to
the ACC or LOCK position. The security
indicator light in the instrument cluster
flashes every 2 seconds until the system is
disarmed.
illuminate or flash if the advanced
key is placed in an area where it is
difficult for the system to detect the
signal, such as on the dashboard, or
in the glove box. Move the advanced
key to another place, turn the
ignition switch to the LOCK
position, and then restart the engine.
l
Signals from a TVor radio station, or
from a transceiver or a mobile
telephone could interfere with your
immobilizer system. If you are using
the proper advanced key and the
engine fails to start, check the
Disarming
The system is disarmed when the ignition
switch is turned to the ON position with
the registered advanced key.
The security indicator light illuminates for
about 3 seconds and goes out.
security indicator light. If the
indicator light is flashing, turn the
ignition switch to the ACC or LOCK
position and wait for a while, then
restart the engine. If it doesn't start
after 3 or more tries, contact an
Authorized Mazda Dealer.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
l
If the security indicator light flashes
continuously while you are driving,
don't shut off the engine. Go to an
Authorized Mazda Dealer and have
it checked. If the engine is shut off
while the indicator light is flashing,
you won't be able to restart it.
l
Since the electronic codes are reset
when repairing the immobilizer
system, the advanced key (including
auxiliary key) are needed. Bring all
the advanced keys (including
auxiliary keys) to an Authorized
Mazda Dealer.
3-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page107
Thursday, August 25 2005 4:54 PM
Black plate (107,1)
Knowing Your Mazda
Security System
qMaintenance
qModification and Add-On
Equipment
If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed to it.
NOTE
l
The advanced keys (including
CAUTION
auxiliary key) carry a unique
electronic code. For this reason, and
to assure your safety, obtaining a
replacement advanced key (including
auxiliary key) requires some waiting
time. They are only available
through an Authorized Mazda
Dealer.
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
l
Always keep a spare advanced key
in case one is lost. If an advanced
key is lost, consult an Authorized
Mazda Dealer as soon as possible.
l
If you lose an advanced key
(including auxiliary key), an
Authorized Mazda Dealer will reset
the electronic codes of your
remaining advanced keys (including
auxiliary keys) and immobilizer
system. Bring all the remaining
advanced keys (including auxiliary
keys) to an Authorized Mazda
Dealer to reset.
Starting the vehicle with a key that
has not been reset is not possible.
3-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page108
Thursday, August 25 2005 4:54 PM
Black plate (108,1)
Knowing Your Mazda
Security System
Immobilizer System
CAUTION
(without Advanced Key)
When starting the engine do not allow
the following, as the engine may not
start due to the electronic signal from
the ignition key not being transmitted
correctly.
The immobilizer system allows the engine
to start only with a key the system
recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
l
A key ring rests on the key grip.
CAUTION
l
Radio equipment like this is
governed by laws in the United
States.
l
Metal parts of other keys or metal
objects touch the key grip.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
l
To avoid damage to the key, do not:
l
Drop the key.
Get the key wet.
Expose the key to any kind of
l
l
Spare keys or keys for other vehicles
l
equipped with an immobilizer
system touch or come near the key
grip.
magnetic field.
Expose the key to high
l
temperatures on places such as the
dashboard or hood, under direct
sunlight.
l
Devices for electronic purchases, or
security passage touch or come near
the key.
3-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page109
Thursday, August 25 2005 4:54 PM
Black plate (109,1)
Knowing Your Mazda
Security System
Disarming
NOTE
The system is disarmed when the ignition
switch is turned to the ON position with
the correct ignition key.
The security indicator light illuminates for
about 3 seconds and goes out.
l
(U.S.A.)
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
NOTE
l
If the security indicator light comes
on and stays on when the ignition
switch is turned to the ON position,
the engine will not start.
l
Signals from a TVor radio station, or
from a transceiver or a mobile
telephone, could interfere with your
immobilizer system. If you are using
the proper key and your engine fails
to start, check the security indicator
light. If it is flashing, remove the
ignition key and wait 2 seconds or
more, then reinsert it and try starting
the engine again. If it doesn't start
after 3 or more tries, contact an
Authorized Mazda Dealer.
qOperation
Arming
The system is armed when the ignition
switch is turned from the ON to the ACC
position.
The security indicator light in the
instrument panel flashes every 2 seconds
until the system is disarmed.
l
If the security indicator light flashes
continuously while you are driving,
don't shut off the engine. Go to an
Authorized Mazda Dealer and have
it checked. If you shut off the engine
while the light is flashing you won't
be able to restart it.
3-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page110
Thursday, August 25 2005 4:54 PM
Black plate (110,1)
Knowing Your Mazda
Security System
qModification and Add-On
NOTE
Equipment
l
Since the electronic codes are reset
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed to it.
when repairing the immobilizer
system, the keys are needed. Bring
all the existing keys to an Authorized
Mazda Dealer.
CAUTION
qMaintenance
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.
NOTE
l
The keys carry a unique electronic
code. For this reason, and to assure
your safety, obtaining replacement
key requires some waiting time.
They are only available through an
Authorized Mazda Dealer.
l
Always keep a spare key, in case one
is lost. If a key is lost, contact an
Authorized Mazda Dealer as soon as
possible.
l
If you lose a key, an Authorized
Mazda Dealer will reset the
electronic codes of your remaining
keys and immobilizer system. Bring
all the remaining keys to an
Authorized Mazda Dealer to reset.
Starting the vehicle with a key that
has not been reset is not possible.
3-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page111
Thursday, August 25 2005 4:54 PM
Black plate (111,1)
Knowing Your Mazda
Security System
l
l
l
Unlocking a door with the inside door-
lock knob.
Theft-Deterrent Systemí
The optional theft-deterrent system is
designed to prevent your vehicle or its
contents from being stolen when all doors,
hood, and trunk lid are locked.
Opening the hood by operating the
hood release handle.
Opening the trunk lid by operating the
trunk lid release button.
If forcible entry is attempted, the system
sounds the horn and flashes the hazard
warning lights.
If the system is triggered again, the lights
and horn will activate until a door is
unlocked or the trunk lid is opened with
the key or with the transmitter.
(With advanced key)
The lights and horn can also be
deactivated by pressing a request switch.
NOTE
l
The theft-deterrent system operates
with the key or the keyless entry
system transmitter.
qHow to Arm the System
l
(With advanced key)
1. Remove the key from the ignition
switch.
The theft-deterrent system can also
be operated using a request switch or
the start knob.
The system operates only when the
driver is in the vehicle or within
operational range while the advanced
key is being carried.
(With advanced key)
Turn the start knob to the LOCK
position.
2. Make sure the hood and the trunk lid
are closed. Close and lock all doors
from the outside using the key or press
the lock button on your keyless entry
system transmitter.
l
The system will not function unless
it is properly armed. To properly
secure the vehicle, always make sure
all windows are completely closed
and all doors and the trunk lid are
locked before leaving the vehicle.
Remember to take your key and
transmitter.
(With advanced key)
Press a request switch or the lock
button on the transmitter.
The hazard warning lights will flash
once to indicate that the system is
armed.
qOperation
(Without advanced key)
The following method will also arm the
theft-deterrent system:
System triggering conditions
The horn sounds intermittently and the
hazard warning lights flash for about 3
minutes when the system is triggered by
any one of the following:
Close the hood and the trunk lid . Press
the area on the door-lock switch
marked “LOCK” once. Close all doors.
l
Forcing open a door, the hood or the
trunk lid.
íSome models.
3-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page112
Thursday, August 25 2005 4:54 PM
Black plate (112,1)
Knowing Your Mazda
Security System
l
(With advanced key)
NOTE
l
Press a request switch.
Press the unlock button or press and
hold the trunk button on the
transmitter.
Locking the doors with the inside door-
lock knob will not arm the system.
l
qTo Turn off an Armed System
NOTE
An armed system can be turned off by any
one of the following methods:
If you have any problem with the theft-
deterrent system, consult an Authorized
Mazda Dealer.
l
Unlock a door with the key.
l
Press the unlock button on the keyless
entry system transmitter.
qTheft-Deterrent Labels
l
Insert the key into the ignition switch
and turn it to the ON position.
l
(With advanced key)
l
Press a request switch or the unlock
button on the transmitter.
Turn the start knob to the ON
l
position.
The hazard warning lights will flash twice
to indicate that the system is turned off.
NOTE
A label indicating that your vehicle is
equipped with a Theft-Deterrent System is
in the glove box.
The trunk lid can be opened with the
key or the transmitter even when the
system is armed. The alarm will not
come on and the system will remain
armed.
Mazda recommends that you affix it to the
lower rear corner of a front door window.
qTo Stop an Alarm
A triggered alarm can be turned off by
any one of the following methods:
l
Unlock a door with the key.
l
Open the trunk lid with the key.
l
Press the unlock button or press and
hold the trunk button on the keyless
entry system transmitter.
3-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page113
Thursday, August 25 2005 4:54 PM
Black plate (113,1)
Knowing Your Mazda
Steering Wheel and Mirrors
Steering Wheel
Mirrors
qOutside Mirrors
WARNING
Check the mirror angles before driving.
Mirror type
Adjusting the Steering Wheel:
Adjusting the steering wheel while the
vehicle is moving is dangerous.
Moving it can very easily cause the
driver to abruptly turn to the left or
right. This can lead to loss of control
or an accident. Never adjust the
steering wheel while the vehicle is
moving.
Flat type (driver's side)
Flat surface mirror.
Convex type (front passenger side)
The mirror has single curvature on its
surface.
WARNING
qTilt Steering Wheel
Convex Mirror:
Changing lanes without taking into
account the actual distance of the
vehicle in the convex mirror is
dangerous. You could have a serious
accident. What you see in the convex
mirror is closer than it appears. Be
sure to look over your shoulder before
changing lanes.
To change the angle of the steering wheel,
stop the vehicle, pull the tilt wheel release
lever under the steering column down,
adjust the wheel, then push the release
lever up to lock the column.
Tilt wheel release
lever
Power control mirror
The ignition switch must be in the ACC
or ON position.
To adjust:
1. Press the left or right side of the
selector switch to choose the left or
right side mirror.
After adjusting, push the wheel up and
down to be certain it's locked before
driving.
3-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page114
Thursday, August 25 2005 4:54 PM
Black plate (114,1)
Knowing Your Mazda
Steering Wheel and Mirrors
2. Depress the mirror switch in the
appropriate direction.
Mirror defrosterí
To turn on the mirror defrosters, turn the
ignition switch to the ON position and
push the rear window defroster switch
(page 5-59).
Outside mirror
Selector switch
qRearview Mirror
Mirror switch
WARNING
Blocked View:
Cargo stacked higher than the
seatbacks is dangerous. It can block
your view in the rearview mirror,
which might cause you to hit another
car when changing lanes. Don't stack
things higher than the seatbacks.
After adjusting the mirror, lock the control
by placing the selector switch in the
middle position.
Folding the mirror
Fold the outside mirror rearward until it is
locked.
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.
Manual day/night mirror
WARNING
Driving with Mirrors Folded In:
Driving with the outside mirrors
folded in is dangerous. Your rear view
will be restricted, and you could have
an accident. Always return the outside
mirrors to the driving position before
you start driving.
3-54
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page115
Thursday, August 25 2005 4:54 PM
Black plate (115,1)
Knowing Your Mazda
Steering Wheel and Mirrors
Auto-dimming mirror
Press the OFF button ( ) to cancel the
automatic dimming function. The
indicator light will go off.
To reactivate the automatic dimming
function, press the ON button ( ). The
indicator light will illuminate.
OFF button
ON button
Indicator light
NOTE
For the manual day/night mirror,
perform the adjustment with the day/
night lever in the day position.
Reducing glare from headlights
Manual day/night mirror
Push the day/night lever forward for day
driving. Pull it back to reduce glare of
headlights from cars at the rear.
Day/Night lever
Day
Night
Auto-dimming mirror
The auto-dimming mirror automatically
reduces glare of headlights from cars at
the rear when the ignition switch is in the
ON position.
3-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page116
Thursday, August 25 2005 4:54 PM
Black plate (116,1)
Knowing Your Mazda
Steering Wheel and Mirrors
NOTE
l
Do not use glass cleaner or suspend
objects on or around the light sensor.
Otherwise, light sensor sensitivity
will be affected and may not operate
normally.
Light sensor
Light sensor
l
For information regarding the 3
buttons (
,
,
) on the auto-
dimming mirror, refer to HomeLink
Wireless Control System (page
3-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page117
Thursday, August 25 2005 4:54 PM
Black plate (117,1)
Before Driving Your Mazda
4
Important information about driving your Mazda.
Towing ......................................................................................... 4-13
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page118
Thursday, August 25 2005 4:54 PM
Black plate (118,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Fuel Requirements
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,
which will reduce exhaust emissions and keep spark plug fouling to a minimum.
Your Mazda will perform best with fuel listed in the table.
Fuel
Octane Rating*(Anti-knock index)
Premium unleaded fuel
91 [ (R+M)/2 method] or above (96 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
You may use a regular unleaded fuel with an Octane Rating from 87 to 90 (91 to 95 RON)
but this will slightly reduce performance.
Fuel with a rating lower than 87 octane (91 RON) could cause the emission control system
to lose effectiveness. It could also cause engine knocking and serious engine damage.
CAUTION
l
USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter or the oxygen sensor. The lead will
accumulate on the oxygen sensor and the catalyst inside the converter. This will result
in a malfunction of the emission control system, causing poor performance.
l
Your vehicle can only use oxygenated fuels containing no more than 10% ethanol by
volume. Damage to your vehicle may occur when ethanol exceeds this
recommendation, or if the gasoline contains any methanol. Stop using gasohol of any
kind if your vehicle engine is performing poorly.
l
Never add fuel system additives. Never add cleaning agents other than those specified
by Mazda. Other cleaning agents and additives may damage the system. Consult an
Authorized Mazda Dealer.
Gasoline blended with oxygenates such as alcohol or ether compounds are generally
referred to as oxygenated fuels. The common gasoline blend that can be used with your
vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as
ethanol or methanol, may be marketed under the name “Gasohol”.
Vehicle damage and drivability problems resulting from the use of the following may not
be covered by the Mazda warranty.
l
Gasohol containing more than 10% ethanol.
l
Gasoline or gasohol containing methanol.
l
Leaded fuel or leaded gasohol.
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page119
Thursday, August 25 2005 4:54 PM
Black plate (119,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Emission Control System
Your vehicle is equipped with an emission control system (the catalytic converter is part of
this system) that enables your vehicle to comply with existing exhaust emissions
requirements.
WARNING
Parking Over Flammable Objects:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with
the engine turned off, the exhaust system could ignite it because the exhaust system
gets very hot during normal use. A resulting fire could cause serious injury or death.
Never park over or near anything flammable.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst inside
the converter or cause the converter to get very hot. Either condition will damage the
converter and cause poor performance.
l
USE ONLY UNLEADED FUEL.
l
Don't drive your Mazda with any sign of engine malfunction.
l
Don't coast with the ignition switch turned off.
l
Don't descend steep grades in gear with the ignition switch turned off.
l
Don't operate the engine at high idle for more than 2 minutes.
l
Don't tamper with the emission control system. All inspections and adjustments must
be made by a qualified technician.
l
Don't push-start or pull-start your vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission control
system before the first sale and registration of a vehicle is subject to penalties. In some
states, such modification made on a used vehicle is also subject to penalties.
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page120
Thursday, August 25 2005 4:54 PM
Black plate (120,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
NOTE
While the engine is off, the sound of a valve opening and closing can be heard from
inside and outside of the cabin interior, however this does not indicate an abnormality.
Your vehicle has a self-checking device and it operates while the engine is off.
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page121
Thursday, August 25 2005 4:54 PM
Black plate (121,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Engine Exhaust (Carbon Monoxide)
WARNING
Carbon Monoxide:
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is
colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness
and death. If you smell exhaust gas inside your vehicle, keep all windows fully open
and contact an Authorized Mazda Dealer immediately.
Exhaust Gas in Enclosed Area:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust
gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss of
consciousness or even death could occur. Don't run the engine when inside an
enclosed area.
Idling with the Windows Closed:
Exhaust gas is dangerous. When your vehicle is stopped with the windows closed and
the engine running for a long time even in an open area, exhaust gas, which contains
poisonous carbon monoxide, could enter the cabin. Loss of consciousness or even
death could occur. Open the windows or adjust the heating or cooling system to draw
fresh air.
Snow Blocking the Exhaust Gas:
Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaust
pipe could be blocked by the snow, allowing exhaust gas to enter the cabin. Because
exhaust gas contains poisonous carbon monoxide, anyone in the cabin could be
injured or killed. Clear the snow from underneath and around your vehicle,
particularly the tail pipe, before starting the engine.
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page122
Thursday, August 25 2005 4:54 PM
Black plate (122,1)
Before Driving Your Mazda
Before Starting the Engine
Before Getting In
After Getting In
l
l
l
l
Be sure the windows, outside mirrors,
and outside lights are clean.
Are all doors closed and locked?
Is the seat adjusted properly?
l
Inspect inflation pressures and
condition of tires.
Are the inside and outside mirrors
adjusted?
l
Look under the vehicle for any sign of
a leak.
l
l
l
Is everyone's seat belt fastened?
Check all gauges.
l
If you plan to back up, make sure
nothing is in your way.
Check all warning lights when the
ignition switch is turned to the ON
position.
NOTE
l
Release the parking brake and make
sure the brake warning light goes off.
Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. See
Maintenance, Section 8.
Always be thoroughly familiar with your
Mazda.
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page123
Thursday, August 25 2005 4:54 PM
Black plate (123,1)
Before Driving Your Mazda
Driving Tips
Break-In Period
Money-Saving Suggestions
No special break-in is necessary, but a few
precautions in the first 1,000 km (600
miles) may add to the performance,
economy, and life of your Mazda.
How you operate your Mazda determines
how far it will travel on a tank of fuel. Use
these suggestions to help save money on
fuel and repairs.
l
l
Don't race the engine.
Avoid long warm-ups. Once the engine
runs smoothly, begin driving.
l
Don't maintain one constant speed,
either slow or fast, for a long period of
time.
l
Avoid fast starts.
l
Keep the engine tuned. Follow the
l
Don't drive constantly at full-throttle or
high engine rpm (over 7,000 rpm) for
extended periods of time.
have an Authorized Mazda Dealer
perform inspections and servicing.
l
l
Avoid unnecessary hard stops.
Use the air conditioner only when
necessary.
l
Avoid full-throttle starts.
l
Slow down on rough roads.
l
Keep the tires properly inflated.
l
Don't carry unnecessary weight.
l
Don't rest your foot on the brake pedal
while driving.
l
Keep the wheels in correct alignment.
l
Keep windows closed at high speeds.
l
Slow down when driving in crosswinds
and headwinds.
WARNING
Coasting:
Stopping the engine when going down
a hill is dangerous. This causes the
loss of power steering and power
brake control, and may cause damage
to the drivetrain. Any loss of steering
or braking control could cause an
accident. Never stop the engine when
going down a hill.
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page124
Thursday, August 25 2005 4:54 PM
Black plate (124,1)
Before Driving Your Mazda
Driving Tips
l
For more traction in starting on
slippery surfaces such as ice or packed
snow, use sand, rock salt, chains,
carpeting, or other nonslip material
under the rear wheels.
Hazardous Driving
WARNING
Downshifting on Slippery Surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
dangerous. The sudden change in tire
speed could cause the tires to skid.
This could lead to loss of vehicle
control and an accident. If it is
necessary to downshift on slippery
surfaces, be very careful.
NOTE
Use snow chains only on the rear
wheels.
ABS:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident. So do not rely
on ABS as a substitute for safe
driving.
When driving on ice or in water, snow,
mud, sand, or similar hazard:
l
Be cautious and allow extra distance
for braking.
l
Avoid sudden braking and quick
steering.
l
Do not pump the brakes. Continue to
press down on the brake pedal.
l
If you get stuck, select a lower gear and
accelerate slowly. Do not spin the rear
wheels.
4-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page125
Thursday, August 25 2005 4:54 PM
Black plate (125,1)
Before Driving Your Mazda
Driving Tips
Rocking the Vehicle
Winter Driving
l
Carry emergency gear, including tire
chains, window scraper, flares, a small
shovel, jumper cables, and a small bag
of sand or salt.
WARNING
Spinning the Wheels:
When the vehicle is stuck, spinning
the wheels at high speed is dangerous.
The spinning tire could overheat and
explode. This could cause serious
injuries. Don't spin the wheels at more
than 56 km/h (35 mph), and don't
allow anyone to stand behind a wheel
when pushing the vehicle.
Ask an Authorized Mazda Dealer to
perform the following precautions:
l
Have the proper ratio of antifreeze in
the radiator.
Refer to Engine Coolant on page 8-15.
l
Inspect the battery and its cables. Cold
reduces battery capacity.
l
Inspect the ignition system for damage
and loose connections.
CAUTION
l
Use washer fluid made with
Too much rocking may cause engine
overheating, transmission failure, and
tire damage.
antifreeze―but don't use engine
coolant antifreeze for washer fluid
(page 8-19).
l
Don't use the parking brake in freezing
If you must rock the vehicle to free it from
snow, sand or mud, depress the
accelerator slightly and slowly move the
shift lever from 1 (D) to R.
weather as the parking brake may
freeze. Instead, shift to P with an
automatic transmission and to 1 or R
with a manual transmission. Block the
rear wheels.
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page126
Thursday, August 25 2005 4:54 PM
Black plate (126,1)
Before Driving Your Mazda
Driving Tips
qSnow Tires
qTire Chains
Use snow tires on all four wheels
Check local regulations before using tire
chains.
Don't go faster than 120 km/h (75 mph)
while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)
more than recommended on the tire
pressure label (rear door on the driver's
side), but never more than the maximum
cold-tire pressure shown on the tires.
Your vehicle is originally equipped with
summer tires designed for optimum
traction on wet and dry roads. If your
vehicle is to be used on snow and ice
covered roads, Mazda recommends that
you replace the tires originally equipped
on your vehicle with snow tires during the
winter months.
CAUTION
l
Chains may scratch or chip
aluminum wheels. Install tire chains
on steel wheels only.
l
Chains may affect handling.
l
Don't go faster than 50 km/h (30
mph) or the chain manufacturer's
recommended limit, whichever is
lower.
l
Drive carefully and avoid bumps,
holes, and sharp turns.
l
Avoid locked-wheel braking.
WARNING
l
Don't use chains on a temporary
spare tire; it may result in damage to
the vehicle and to the tire. Your
vehicle is not equipped with a
factory installed temporary spare
tire.
Mixing Tire Types:
Using tires different in size or type is
dangerous. Your vehicle's handling
could be greatly affected and result in
an accident. Use only the same size
and type tires (snow, radial, or non-
radial) on all four wheels.
l
Don't use chains on roads that are
free of snow or ice. The tires and
chains could be damaged.
CAUTION
NOTE
Check local regulations before using
studded tires.
If your vehicle is equipped with the tire
pressure monitoring system, the system
may not function correctly when using
tire chains.
NOTE
If your vehicle is equipped with the tire
pressure monitoring system, the system
may not function correctly when using
tires with steel wire reinforcement in
the sidewalls (page 5-29).
Install the chains on the rear tires.
Don't use chains on the front tires.
Use only SAE Class “S” chains, and make
sure they fit.
4-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page127
Thursday, August 25 2005 4:54 PM
Black plate (127,1)
Before Driving Your Mazda
Driving Tips
Installing the chains
Driving In Flooded Area
1. Secure the chains on the rear tires as
tightly as possible. Always follow the
chain manufacturer's instructions.
WARNING
2. Retighten the chains after driving 1/2
Driving with Wet Brakes:
―1 km (1/4―1/2 mile).
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance returns to normal.
CAUTION
Make sure water does not enter the
vehicle interior or the engine area.
Interior materials could get moldy, and
many electronic devices in the cabin
and the engine could be damaged.
4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page128
Thursday, August 25 2005 4:54 PM
Black plate (128,1)
Before Driving Your Mazda
Driving Tips
Overloading
WARNING
Vehicle Load Weight:
The gross axle weight rating (GAWR)
and the gross vehicle weight rating
(GVWR) of your vehicle are on the
Motor Vehicle Safety Standard Label
on the driver's door frame. Exceeding
these ratings can cause an accident or
vehicle damage. You can estimate the
weight of your load by weighing the
items (or people) before putting them
in the vehicle. Be careful not to
overload your vehicle.
4-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page129
Thursday, August 25 2005 4:54 PM
Black plate (129,1)
Before Driving Your Mazda
Towing
Trailer Towing
The Mazda RX-8 is not designed for
towing. Never tow a trailer with your
Mazda RX-8.
4-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page130
Thursday, August 25 2005 4:54 PM
Black plate (130,1)
4-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page132
Thursday, August 25 2005 4:54 PM
Black plate (132,1)
Driving Your Mazda
Starting and Driving
qIgnition Switch Positions
Ignition Switch
With advanced
key
(With advanced key)
NOTE
When starting the engine using the
advanced key, refer to Starting the
Engine (page 3-10).
Without advanced
key
When starting the engine with the
auxiliary key, perform the following
procedure.
LOCK
1. Remove the auxiliary key from the
advanced key (page 3-16).
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
2. Make sure the start knob is in LOCK
position.
Manual transmission
3. Remove the start knob by pulling it
outward while pressing the buttons on
both the left and right sides.
To turn the key from the ACC to the
LOCK position, push the key in at the
ACC position, then turn it to the LOCK
position.
Push the key
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page133
Thursday, August 25 2005 4:54 PM
Black plate (133,1)
Driving Your Mazda
Starting and Driving
Automatic transmission
NOTE
To turn the key from the ACC to the
LOCK position, the shift lever must be in
the P position.
If turning the key is difficult, jiggle the
steering wheel from side to side.
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
ON
This is the normal running position after
the engine is started. The warning lights
(except brakes) should be inspected
before the engine is started (page 5-38).
Shift lever
engaged in P
(park)
NOTE
(With headlight auto-leveling)
When the ignition switch is turned to
the ON position, the sound of the
headlight leveling motors operating at
the front of the engine compartment can
be heard. This does not indicate an
abnormality.
WARNING
Removing the Key:
It's dangerous to remove the key from
the ignition switch while the vehicle is
moving. Removing the key allows the
steering wheel to lock. You will lose
steering control and a serious accident
could occur.
START
Remove the key only when the vehicle
is parked.
The engine is started in this position. It
will crank until you release the key; then
it returns to the ON position. The brake
warning light can be checked after the
engine is started (page 5-38).
Not Setting the Parking Brake:
Leaving the driver's seat without
setting the parking brake is
dangerous. Unexpected vehicle
movement could occur if the parking
brake is not set. This could cause an
accident. Before leaving the driver's
seat, always set the parking brake and
make sure the shift lever is in P with
an automatic transmission or in 1 or R
with a manual transmission.
qIgnition Key Reminder
If the ignition switch is in the LOCK or
ACC position with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page134
Thursday, August 25 2005 4:54 PM
Black plate (134,1)
Driving Your Mazda
Starting and Driving
Starting the Engine
CAUTION
Don't try the starter for more than 10
seconds at a time. If the engine stalls or
fails to start, wait 10 seconds before
trying again. Otherwise, you may
NOTE
Engine-starting is controlled by the
spark ignition system.
This system meets all Canadian
Interference-Causing Equipment
Standard requirements regulating the
impulse electrical field strength of radio
noise.
damage the starter and drain the battery.
6. After starting the engine, let it idle for
about 10 seconds.
NOTE
1. Occupants should fasten their seat
belts.
l
In extremely cold weather, below
18 °C (0 °F), or after the vehicle
_
2. Make sure the parking brake is on.
3. Depress the brake pedal.
has not been driven in several days,
let the engine warm up without
operating the accelerator.
4. (Manual transmission)
Depress the clutch pedal all the way
and shift into neutral.
l
Whether the engine is cold or warm,
it should be started without use of
the accelerator.
Keep the clutch pedal depressed while
cranking the engine.
l
To protect the engine, when the
engine coolant temperature is low,
the engine does not run at high
speeds. The fuel supply will be cut at
an rpm lower than the red zone.
(Automatic transmission)
Put the vehicle in park (P). If you must
restart the engine while the vehicle is
moving, shift into neutral (N).
NOTE
(Manual transmission)
The starter will not operate if the clutch
pedal is not depressed all the way.
(Automatic transmission)
The starter will not operate if the shift
lever is not in P or N.
5. Turn the ignition switch to the START
position and hold (up to 10 seconds at
a time) until the engine starts.
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page135
Thursday, August 25 2005 4:54 PM
Black plate (135,1)
Driving Your Mazda
Starting and Driving
Brake System
WARNING
qFoot Brake
Driving with Wet Brakes:
Your Mazda has power-assisted brakes
that adjust automatically through normal
use.
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. But the distance required to
stop will be greater than usual.
WARNING
qParking Brake
Coasting with the Engine Off:
Continuing to coast when the engine
is stalled or turned off is dangerous.
Braking will require more effort, and
the brake's power-assist could be
depleted if you pump the brake. This
will cause longer stopping distances or
even an accident. Don't continue
coasting when the engine is stalled or
turned off, find a safe place to stop.
WARNING
Not Setting the Parking Brake:
Leaving the driver's seat without
setting the parking brake is
dangerous. Unexpected vehicle
movement could occur if the parking
brake is not set. This could cause an
accident. Before leaving the driver's
seat, always set the parking brake and
make sure the shift lever is in P with
an automatic transmission or in 1 or R
with a manual transmission.
Riding the Brakes:
Driving with your foot continuously
on the brake pedal or steadily applying
the brakes for long distances is
dangerous. This causes overheated
brakes, resulting in longer stopping
distances or even total brake failure.
This could cause loss of vehicle
control and a serious accident. Avoid
continuous application of the brakes.
Shift to a lower gear when going down
steep hills.
CAUTION
Driving with the parking brake on will
cause excessive wear of the brake
linings or pads.
NOTE
For parking in snow, refer to Winter
brake use.
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page136
Thursday, August 25 2005 4:54 PM
Black plate (136,1)
Driving Your Mazda
Starting and Driving
Setting the parking brake
qBrake System Warning Light
Depress the brake pedal and then firmly
pull the parking brake lever fully upwards
with a greater amount of force than is
required so that the vehicle holds in the
stationary position.
This warning has the following functions:
Parking brake warning
The light comes on when the parking
brake is applied with the ignition switch
in the START or ON position. It goes off
when the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Releasing the parking brake
Depress the brake pedal and pull the
parking brake lever upwards, then press
the release button. While holding the
button, lower the parking brake lever all
the way down to the released position.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
push or that it may go closer to the floor.
In either case, it will take longer to stop
the vehicle.
1. With the engine stopped, check the
brake fluid level immediately and add
fluid as required (page 8-18).
2. After adding fluid, check the light
again.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
Even if the light goes out have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page137
Thursday, August 25 2005 4:54 PM
Black plate (137,1)
Driving Your Mazda
Starting and Driving
NOTE
WARNING
Having to add brake fluid is sometimes
an indicator of leakage. Consult an
Authorized Mazda Dealer as soon as
possible even if the brake light is no
longer illuminated.
ABS:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident. So do not rely
on ABS as a substitute for safe
driving.
WARNING
Brake Warning Light:
Driving with the brake system warning
light on is dangerous. It indicates that
your brakes may not work at all or
that they could completely fail at any
time. If this light remains on, after
checking that the parking brake is
fully released, have the brakes
inspected immediately. Don't drive
with this light on, have the vehicle
towed to an Authorized Mazda Dealer
to have the brakes inspected as soon
as possible.
NOTE
Braking distances may be longer on
loose surfaces (snow or gravel, for
example) which usually have a hard
foundation. A vehicle with a normal
braking system may require less
distance to stop under these conditions
because the tires will build up a wedge
of surface layer when the wheels skid.
qAnti-Lock Brake System (ABS)
qABS Warning Light
The ABS control unit continuously
monitors the speed of each wheel. If one
is about to lock up, the ABS responds by
automatically releasing and reapplying
that wheel's brake.
The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal when the ABS operates. Don't
pump the brakes, continue to press down
on the brake pedal.
The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page138
Thursday, August 25 2005 4:54 PM
Black plate (138,1)
Driving Your Mazda
Starting and Driving
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
WARNING
ABS Warning Light and Brake
Warning Light on at the Same Time:
Driving when the brake system
warning light and ABS warning light
are on at the same time is dangerous.
When both lights are on, the rear
wheels could lock more quickly in an
emergency stop than under normal
circumstances.
Don't drive with both lights on, have
the vehicle towed to an Authorized
Mazda Dealer to have the brakes
inspected as soon as possible.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
NOTE
When the engine is jump-started to
charge the battery, uneven rpm occurs
and the ABS warning light comes on.
This is due to a weak battery, not a
malfunction.
Recharge the battery.
qElectronic Brake Force
qBrake Pad Wear Indicator
Distribution System Warning
When the disc brake pads become worn,
the built-in wear indicators contact the
disc plates. This causes a screeching noise
to warn that the pads should be replaced.
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may turn the brake system
warning light and the ABS warning light
on at the same time. The problem is likely
to be an electronic brake force distribution
system.
When you hear this noise, consult an
Authorized Mazda Dealer as soon as
possible.
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page139
Thursday, August 25 2005 4:54 PM
Black plate (139,1)
Driving Your Mazda
Starting and Driving
Manual Transmission
Operation
WARNING
Driving with Worn Disc Pads:
q
Manual Transmission Shift Pattern
Driving with worn disc pads is
dangerous. The brakes could fail and
cause a serious accident. As soon as
you hear a screeching noise consult
an Authorized Mazda Dealer.
Neutral position
The shift pattern of the transmission is
conventional, as shown.
Depress the clutch pedal all the way down
while shifting; then release it slowly.
Your vehicle is equipped with a device to
prevent shifting to R (reverse) by mistake.
Push the shift lever downward and shift to
R.
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page140
Thursday, August 25 2005 4:54 PM
Black plate (140,1)
Driving Your Mazda
Starting and Driving
qRecommendations for Shifting
WARNING
Upshifting
For normal acceleration, we recommend
these shift points.
Sudden Engine-Braking:
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed could
cause the tires to skid. This could lead
to loss of vehicle control and an
accident. Do not use sudden engine
braking on slippery road surfaces or at
high speeds.
Gear
Vehicle speed
23 km/h (14 mph)
1 to 2
2 to 3
3 to 4
4 to 5
5 to 6
35 km/h (22 mph)
47 km/h (29 mph)
58 km/h (36 mph)
74 km/h (46 mph)
For cruising
Gear
1 to 2
Vehicle speed
23 km/h (14 mph)
34 km/h (21 mph)
45 km/h (28 mph)
56 km/h (35 mph)
68 km/h (42 mph)
2 to 3
CAUTION
3 to 4
4 to 5
l
Keep your foot off the clutch pedal
5 to 6
except when shifting gears. Also,
don't use the clutch to hold the
vehicle on an upgrade. Riding the
clutch will cause needless clutch
wear and damage.
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
reduces the chance of stalling and gives
better acceleration when you need more
speed.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
l
Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is still
moving may damage the
transmission.
NOTE
If shifting to R is difficult, shift back
into neutral, release the clutch pedal,
and try again.
5-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page141
Thursday, August 25 2005 4:54 PM
Black plate (141,1)
Driving Your Mazda
Starting and Driving
Automatic Transmission Controls
Various Lockouts:
Indicates that you must depress the brake pedal to shift (The ignition
switch must be in the ACC or ON position).
Indicates the shift lever can be shifted freely into any position.
qTransmission Ranges
CAUTION
The shift lever must be in P or N to
operate the starter.
l
l
Shifting into P, N or R while the
vehicle is moving can damage your
transmission.
P (Park)
P locks the transmission and prevents the
rear wheels from rotating.
Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transmission.
WARNING
R (Reverse)
Holding the Vehicle with P:
Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is dangerous.
If P fails to hold, the vehicle could
move and cause an accident. To hold
the vehicle, set the shift lever to P AND
set the parking brake.
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page142
Thursday, August 25 2005 4:54 PM
Black plate (142,1)
Driving Your Mazda
Starting and Driving
N (Neutral)
M (Manual)
In N, the wheels and transmission are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.
M is the manual shift mode position.
Gears can be shifted up or down by
operating the shift lever or steering shift
switches.
Refer to Manual Shift Mode (page 5-13).
WARNING
qActive Adaptive Shift (AAS)
Active Adaptive Shift (AAS)
Shifting from N or P:
automatically controls the transmission
shift point best suited to road conditions
and driver input to optimize engine
performance and improve drive comfort.
When cornering the vehicle, AAS mode
will hold the transmission in the gear the
vehicle was in before entering the curve,
allowing the vehicle to be accelerated
from the same gear after exiting the curve.
If the driver accelerates rapidly, or
accelerates and decelerates rapidly by
operating the accelerator and brake pedal
for a certain period of time while the
selector lever is in the D position, AAS
mode could activate. When this occurs,
AAS mode will maintain the transmission
in the optimum gear and the driver may
sense that the transmission is not shifting,
however this does not indicate an
It's dangerous to shift from N or P
into a driving gear when the engine is
running faster than idle. If this is
done, the vehicle could move suddenly,
causing an accident or serious injury.
If the engine is running faster than
idle, don't shift from N or P into a
driving gear.
Shifting into N while Driving:
Shifting into N while driving is
dangerous. Engine braking cannot be
applied when decelerating which
could lead to an accident or serious
injury. Do not shift into N when
driving the vehicle.
CAUTION
abnormality.
Do not shift into N when driving the
vehicle. Doing so can cause
transmission damage.
qShift-Lock System
The shift-lock system prevents shifting
out of P unless the brake pedal is
depressed.
D (Drive)
D is the normal driving position. From a
stop, the transmission will automatically
shift through a 6-gear sequence.
To shift from P:
1. Depress and hold the brake pedal.
2. Start the engine.
3. Move the shift lever.
5-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page143
Thursday, August 25 2005 4:54 PM
Black plate (143,1)
Driving Your Mazda
Starting and Driving
NOTE
NOTE
l
When the ignition switch is in the
LOCK position, the shift lever
cannot be shifted from P.
If you change to manual shift mode
when the vehicle is stopped, the gear
will shift to M1.
l
l
To be sure the vehicle is in park, the
ignition key cannot be removed
unless the shift lever is in P.
Indicators
Shift position indicator
(With Advanced Key)
In manual shift mode, the “M” of the shift
position indicator in the instrument panel
illuminates.
The ignition switch cannot be turned
from the ACC position to the LOCK
position when the shift lever is not in
P.
Gear position indicator
The numeral for the selected gear
illuminates.
qManual Shift Mode
This mode gives you the feel of driving a
manual transmission vehicle by operating
the shift lever and allows you to control
engine rpm and torque to the rear wheels
much like a manual transmission when
more control is desired.
Shift position
indicator
Gear position
indicator
To change to manual shift mode, shift the
lever from D to M.
NOTE
If the gears cannot be shifted down
when driving at higher speeds, the gear
position indicator will flash twice to
signal that the gears cannot be shifted
down.
Shifting
To return to automatic shift mode, shift
the lever from M to D.
You can shift gears up and down by
operating the shift lever or the steering
shift switches.
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page144
Thursday, August 25 2005 4:54 PM
Black plate (144,1)
Driving Your Mazda
Starting and Driving
To shift up to a higher gear with the
steering shift switches, tap either of the
UP switches toward you once with your
fingers.
NOTE
l
If the steering shift switches on both
sides (left and right) are operated
simultaneously, the gear will shift
once.
UP switches
l
The gear will not shift if:
l
The steering shift switch and the
shift lever are operated
simultaneously.
The UP switch and DOWN
l
switch are operated
simultaneously.
Manually Shifting up
(M1→M2→M3→M4→M5→M6)
To shift up to a higher gear, tap the shift
lever back ( ) once.
WARNING
Hand Position When Using Steering
Shift Switches:
Putting your hands inside the rim of
the steering wheel when using the
steering shift switches is dangerous. If
the driver air bag were to deploy in a
collision, your hands could be
impacted causing injury. Keep your
hands on the steering wheel rim when
using fingers or thumbs on the
steering shift switches.
5-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page145
Thursday, August 25 2005 4:54 PM
Black plate (145,1)
Driving Your Mazda
Starting and Driving
To shift down to a lower gear with the
steering shift switches, press either of the
DOWN switches away from you once
with your thumb.
NOTE
l
When driving slowly, the gears may
not shift up depending on vehicle
speed.
DOWN switches
l
In manual shift mode, gears do not
shift up automatically. Don't run the
engine with the tachometer needle in
the RED ZONE. If the tachometer
needle enters the RED ZONE, you
may feel engine-braking because the
fuel delivery will be stopped to
protect the engine. However, this
does not indicate an abnormality.
l
When depressing the accelerator
fully, the transmission will shift to a
lower gear, depending on vehicle
speed.
WARNING
Sudden Engine-Braking:
Manually Shifting down
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed could
cause the tires to skid. This could lead
to loss of vehicle control and an
accident. Do not use sudden engine
braking on slippery road surfaces or at
high speeds.
(M6→M5→M4→M3→M2→M1)
To shift down to a lower gear, tap the shift
lever forward ( ) once.
Hand Position When Using Steering
Shift Switches:
Putting your hands inside the rim of
the steering wheel when using the
steering shift switches is dangerous. If
the driver air bag were to deploy in a
collision, your hands could be
impacted causing injury. Keep your
hands on the steering wheel rim when
using fingers or thumbs on the
steering shift switches.
5-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page146
Thursday, August 25 2005 4:54 PM
Black plate (146,1)
Driving Your Mazda
Starting and Driving
Shifting down
NOTE
If the vehicle speed is higher than the
speed specified for each gear, the gear
cannot be shifted down to a lower gear.
l
When driving at high speeds, the
gear may not shift down depending
on vehicle speed.
Gear
M6→M5
M5→M4
Vehicle speed
210 km/h (130 mph)
l
During deceleration, the gear may
automatically shift down depending
on vehicle speed.
175 km/h (108 mph)
Between 122 and 135 km/h
(75 and 83 mph), depending on how
much the accelerator pedal is
depressed.
l
When depressing the accelerator
M4→M3
fully, the transmission will shift to a
lower gear, depending on vehicle
speed.
Between 77 and 90 km/h
(47 and 59 mph), depending on how
much the accelerator pedal is
depressed.
M3→M2
Second gear fixed mode
M2→M1
30 km/h (18 mph)
When the shift lever is tapped back (
while the vehicle is stopped, the
)
During deceleration, the gears shift down
automatically when speed is reduced to
the following:
transmission is set in the second gear
fixed mode. The gear is fixed in second
while in this mode for easier starting and
driving on slippery roads. If the shift lever
is tapped back ( ) or forward ( ) while
in the second gear fixed mode, the mode
will be canceled.
Gear
Vehicle speed
Between 60 and 210 km/h
(37 and 130 mph), depending on
how much the accelerator pedal is
released.
M6→M5
Between 40 and 175 km/h
(24 and 108 mph), depending on
how much the accelerator pedal is
released.
Shifting specification
Shifting up
M5→M4
M4→M3
M3→M2
M1→M2
26 km/h (16 mph)
18 km/h (11 mph)
8 km/h (5 mph)
If the vehicle speed is lower than the
speed specified for each gear, the gear
cannot be shifted up to a higher gear.
Gear
Vehicle speed
NOTE
Between 0 and 18 km/h
(0 and 11 mph), depending on how
much the accelerator pedal is
depressed.
M1→M2
The gear does not shift down to M1
automatically while in the second gear
fixed mode.
Between 20 and 33 km/h
(13 and 21 mph), depending on how
much the accelerator pedal is
depressed.
M2→M3
M3→M4
M4→M5
43 km/h (27 mph)
65 km/h (41 mph)
M5→M6
5-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page147
Thursday, August 25 2005 4:54 PM
Black plate (147,1)
Driving Your Mazda
Starting and Driving
If the vehicle is kicked down at the
following speeds or lower, the gears shift
down automatically:
qDriving Tips
Passing
For extra power when passing another
vehicle or climbing steep grades, depress
the accelerator fully. The transmission will
shift to a lower gear, depending on vehicle
speed.
Gear
M6→M5
Vehicle speed
210 km/h (130 mph)
175 km/h (108 mph)
175 km/h (108 mph)
M6→M4
M5→M4
Recommendations for shifting
Upshifting
Climbing steep grades from a stop
To climb a steep grade from a stopped
position:
For normal acceleration and cruising, we
recommend these shift points.
1. Depress the brake pedal.
Gear
M1 to M2
Vehicle speed
19 km/h (12 mph)
2. Shift to D or M1, depending on the
load weight and grade steepness.
M2 to M3
M3 to M4
M4 to M5
M5 to M6
35 km/h (22 mph)
47 km/h (29 mph)
58 km/h (36 mph)
78 km/h (49 mph)
3. Release the brake pedal while
gradually accelerating.
Descending steep grades
For cruising
When descending a steep grade, shift to
lower gears, depending on load weight
and grade steepness. Descend slowly,
using the brakes only occasionally to
prevent them from overheating.
Gear
M1 to M2
M2 to M3
M3 to M4
M4 to M5
M5 to M6
Vehicle speed
5 km/h (3 mph)
30 km/h (19 mph)
40 km/h (25 mph)
50 km/h (31 mph)
67 km/h (42 mph)
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
gives better acceleration when you need
more speed.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
5-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page148
Thursday, August 25 2005 4:54 PM
Black plate (148,1)
Driving Your Mazda
Starting and Driving
NOTE
Power Steering
The power steering system is inoperable
when the power steering malfunction
indicator light illuminates. Steering is
possible, but requires more physical
effort.
Power steering is only operable when the
engine is running. If the engine is off or if
the power steering system is inoperable,
you can still steer, but it requires more
physical effort.
If the steering feels rigid during normal
driving, consult an Authorized Mazda
Dealer.
NOTE
The steering may feel rigid if you
continuously attempt to steer when the
vehicle is stopped or moving extremely
slowly. This has been designed to
protect the system and doesn't indicate a
malfunction. If you don't attempt to
steer for a minute, power steering will
be restored.
qPower Steering Malfunction
Indicator Light
This indicator light illuminates when the
ignition switch is turned to the ON
position and goes off when the engine is
started.
If this light illuminates while driving, it
indicates a malfunction of the power
steering system. Consult an Authorized
Mazda Dealer.
5-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page149
Thursday, August 25 2005 4:54 PM
Black plate (149,1)
Driving Your Mazda
Starting and Driving
qActivation/Deactivation
Cruise Control
To activate the system, press the ON/OFF
switch.
The cruise main indicator light
illuminates.
With cruise control, you can set and
automatically maintain any speed of more
than about 30 km/h (19 mph).
To deactivate the system, press the switch
again.
The cruise main indicator light turns off.
WARNING
Cruise Control Use:
Using cruise control in the following
conditions could cause you to lose
control of the vehicle:
l
Hilly terrain
Steep inclines
Heavy or unsteady traffic
Slippery or winding roads
l
l
l
l
Similar restrictions that require
inconsistent speed
Don't use cruise control in these
situations.
qCruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green)
WARNING
Cruise Main Switch:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as it may be switched on
accidentally. This could result in loss
of vehicle control. Keep the ON/OFF
switch off when cruise control is not in
use.
The indicator light has two colors.
Cruise Main Indicator Light (Amber)
qTo Set Speed
The indicator light illuminates amber
when the ON/OFF switch is pressed and
the cruise control system is activated.
1. Activate the cruise control system by
pressing the ON/OFF switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
5-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page150
Thursday, August 25 2005 4:54 PM
Black plate (150,1)
Driving Your Mazda
Starting and Driving
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
qTo Increase Cruising Speed
Follow either of these procedures.
l
Press the RES/ACCEL button and hold
it. Your vehicle will accelerate.
Release the button at the speed you
want.
Don't continue to hold in the button. Until
you release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the RES/ACCEL
button. Multiple taps will increase your
vehicle speed 1.6 km/h (1 mph) for each
tap.
NOTE
l
The SET function can't be activated
until about 2 seconds after the ON/
OFF switch has been engaged.
l
l
On a steep grade, the vehicle may
Accelerate to the desired speed.
momentarily slow down going up or
speed up while going down.
Press the SET/COAST button and
release it immediately.
5-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page151
Thursday, August 25 2005 4:54 PM
Black plate (151,1)
Driving Your Mazda
Starting and Driving
qTo Resume Cruising Speed at
NOTE
More Than 30 km/h (19 mph)
Accelerate if you want to speed up
temporarily when the cruise control is
on. Greater speed will not interfere with
it or change the set speed.
Take your foot off the accelerator to
return to the set speed.
If some other method besides the ON/
OFF switch was used to cancel cruising
speed and the system is still activated, the
most recent set speed will automatically
resume when the RES/ACCEL button is
pressed.
If vehicle speed is below 30 km/h (19
mph), increase the vehicle speed up to 30
km/h (19 mph) and press the RES/
ACCEL button.
qTo Decrease Cruising Speed
Press the SET/COAST button and hold it.
The vehicle will gradually slow.
Release the button at the speed you want.
qTo Cancel
Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the SET/COAST
button. Multiple taps will decrease your
vehicle speed 1.6 km/h (1 mph) for each
tap.
To turn off the system, use one of these
methods:
l
Press the ON/OFF switch.
l
Slightly depress the brake pedal.
l
Depress the clutch pedal (Manual
transmission only).
5-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page152
Thursday, August 25 2005 4:54 PM
Black plate (152,1)
Driving Your Mazda
Starting and Driving
l
Press the CANCEL button.
Traction Control System
(TCS)í
The Traction Control System (TCS)
enhances traction and safety by
controlling engine torque and braking.
When the TCS detects driving wheel
slippage, it lowers engine torque and
operates the brakes to prevent loss of
traction.
This means that on a slick surface, the
engine adjusts automatically to provide
optimum power to the drive wheels
without causing them to spin and lose
traction.
The system is off when the ignition is off.
NOTE
Cruise control will cancel at about 15
km/h (9 mph) below the preset speed or
below 30 km/h (19 mph).
WARNING
TCS and Unsafe Driving:
The traction control system (TCS)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident. So
don't rely on the traction control
system as a substitute for safe driving.
TCS and Snow and Ice:
Driving without proper traction
devices on snow and/or ice-covered
roads is dangerous. The traction
control system (TCS) alone cannot
provide adequate traction and you
could still have an accident. Use snow
tires or tire chains and drive at
reduced speeds when roads are
covered with ice and/or snow.
5-22
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page153
Thursday, August 25 2005 4:54 PM
Black plate (153,1)
Driving Your Mazda
Starting and Driving
NOTE
Dynamic Stability Control
(DSC)í
To turn off the TCS, press the DSC
OFF switch (page 5-25).
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
WARNING
DSC and Unsafe Driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident. So
don't rely on the dynamic stability
control as a substitute for safe driving.
NOTE
l
In addition to the indicator light
flashing, a slight lugging sound will
come from the engine. This indicates
that the TCS is operating properly.
l
On slippery surfaces, such as fresh
snow, it will be impossible to
achieve high rpm when the TCS is
on.
íSome models.
5-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page154
Thursday, August 25 2005 4:54 PM
Black plate (154,1)
Driving Your Mazda
Starting and Driving
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
CAUTION
l
The DSC may not operate correctly
unless the following are observed:
l
Use tires of the correct size
specified for your Mazda on all
four wheels.
qDSC OFF Indicator Light
l
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Do not mix worn tires.
l
l
The DSC may not operate correctly
when tire chains are used or a
temporary spare tire is installed
because the tire diameter changes.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also comes on when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-25).
l
If repair or replacement of the
steering or other surrounding
equipment is necessary, have it done
at an Authorized Mazda Dealer. If
the center position of the steering
deviates, the DSC may not operate
correctly because there is a sensor in
the steering which detects driving
conditions.
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
5-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page155
Thursday, August 25 2005 4:54 PM
Black plate (155,1)
Driving Your Mazda
Starting and Driving
qDSC OFF Switch
NOTE
Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
will illuminate.
If the battery is disconnected or a fuse is
replaced, the DSC will be inoperable. In
this case, the DSC OFF indicator light
flashes and the TCS/DSC indicator light
illuminates.
To make the DSC operable, do the
following procedure with the battery
connected.
1. Turn the ignition switch to the ON
position.
2. Turn the steering clockwise fully,
then turn it counterclockwise fully.
3. Make sure the DSC OFF indicator
goes off.
Press the switch again to turn the TCS/
DSC back on. The DSC OFF indicator
light will go out.
4. Turn the ignition switch to the OFF
position, then turn it to the ON
position again.
NOTE
5. Make sure the TCS/DSC indicator
light goes off.
l
When DSC is on and you attempt to
free the vehicle when it is stuck, or
drive it out of freshly fallen snow,
the TCS (part of the DSC system)
will activate. Depressing the
accelerator will not increase engine
power and freeing the vehicle may
be difficult.
If the TCS/DSC indicator light and the
DSC OFF indicator light remain
illuminated even after turning the
ignition switch to the ON position,
consult an Authorized Mazda Dealer.
When this happens, turn off the TCS/
DSC.
l
If the TCS/DSC is off when the
engine is turned off, it automatically
activates when the ignition switch is
turned on.
l
Leaving the TCS/DSC on will
provide the best stability. When the
TCS/DSC is off, the TCS/DSC does
not activate but the brake LSD
(Limited Slip Differentials) function
remains.
5-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page156
Thursday, August 25 2005 4:54 PM
Black plate (156,1)
Driving Your Mazda
Starting and Driving
NOTE
Tire Pressure Monitoring
Systemí
l
If the DSC OFF switch is pressed
and held for a second or more, the
TCS/DSC system may become
inoperative due to the system
detecting switch trouble. If the TCS/
DSC system becomes inoperative,
the TCS/DSC and the DSC OFF
indicator lights illuminate
simultaneously. In this case, turn off
the engine and restart it to restore the
TCS/DSC.
The tire pressure monitoring system
(TPMS) monitors the pressure for each
tire.
If tire pressure is too low in one or more
tires, the system will inform the driver via
the warning light in the instrument panel
and by the warning beep sound.
The tire pressure sensors installed on each
wheel send tire pressure data by radio
signal to the receiver unit in the vehicle.
Tire pressure sensors
NOTE
When the ambient temperature is low
due to seasonal changes, tire
temperatures are also lower. If the tire
temperature lowers, the air pressure
lowers as well, and the TPMS warning
light illuminates more frequently.
Inspect the tire pressure daily before
driving, and check the tire pressures
monthly with a tire pressure gauge.
When checking the tire pressures, use
of a digital tire pressure gauge is
recommended.
5-26
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page157
Thursday, August 25 2005 4:54 PM
Black plate (157,1)
Driving Your Mazda
Starting and Driving
TPMS does not alleviate your need to
check the pressure and condition of all
four tires before you drive each day.
CAUTION
l
To avoid false readings, the system
samples for a little while before
indicating a problem. As a result it
will not instantaneously register a
rapid tire deflation or blow out.
CAUTION
l
Each tire, including the spare (if
provided), should be checked
monthly when cold and inflated to
the inflation pressure recommended
by the vehicle manufacturer on the
vehicle placard or tire inflation
pressure label. (If your vehicle has
tires of a different size than the size
indicated on the vehicle placard or
tire inflation pressure label, you
should determine the proper tire
inflation pressure for those tires.)
As an added safety feature, your
vehicle has been equipped with a tire
pressure monitoring system (TPMS)
that illuminates a low tire pressure
telltale when one or more of your
tires is significantly under-inflated.
Accordingly, when the low tire
pressure telltale illuminates, you
should stop and check your tires as
soon as possible, and inflate them to
the proper pressure. Driving on a
significantly under-inflated tire
causes the tire to overheat and can
lead to tire failure. Under-inflation
also reduces fuel efficiency and tire
tread life, and may affect the
NOTE
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
qTire Pressure Monitoring System
Warning Light
This warning light illuminates for a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the warning light illuminates
when tire pressure is too low in one or
more tires, and flashes when there is a
system malfunction.
vehicle's handling and stopping
ability.
Please note that the TPMS is not a
substitute for proper tire
maintenance, and it is the driver's
responsibility to maintain correct tire
pressure, even if under-inflation has
not reached the level to trigger
illumination of the TPMS low tire
pressure telltale.
5-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page158
Thursday, August 25 2005 4:54 PM
Black plate (158,1)
Driving Your Mazda
Starting and Driving
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-6).
WARNING
Vehicle Handling When Tire Pressure
Monitoring System Warning Light
Illuminates/Flashes:
CAUTION
When the tire pressure monitoring
system warning light illuminates or
flashes, or the tire pressure warning
beep sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
When the tire pressure monitoring
system warning light illuminates or
flashes, or the tire pressure warning
beep sound is heard, decrease vehicle
speed immediately and avoid sudden
maneuvering and braking. Have the
system and tires checked or perform
the appropriate repair as soon as
possible by an Authorized Mazda
Dealer.
When replacing/repairing the tires or
wheels or both, have the work done by
an Authorized Mazda Dealer, or the tire
pressure sensors may be damaged.
NOTE
l
Perform tire pressure adjustment
when the tires are cold. Tire pressure
will vary according to the tire
temperature, therefore let the vehicle
stand for 1 hour or only drive it 1.6
km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold
inflation pressure, the TPMS
warning light/beep may turn on after
the tires cool and pressure drops
below specification.
Ignoring the Warning Light:
Also, an illuminated TPMS warning
light, resulting from the tire air
pressure dropping due to cold
ambient temperature, may go out if
the ambient temperature rises. In this
case, it will also be necessary to
adjust the tire air pressures. If the
TPMS warning light illuminates due
to a drop in tire air pressure, make
sure to check and adjust the tire air
pressures.
Ignoring the warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious situation
that could lead to tire failure and a
dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page159
Thursday, August 25 2005 4:54 PM
Black plate (159,1)
Driving Your Mazda
Starting and Driving
Warning light flashes
NOTE
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
l
After adjusting the tire air pressures,
it may require some time for the
TPMS warning light to go out. If the
TPMS warning light remains
illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph)
for 10 minutes, and then verify that it
goes out.
qSystem Error Activation
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
A system error activation may occur in
the following cases:
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture.
l
When there is equipment or a device
near the vehicle using the same radio
frequency as that of the tire pressure
sensors.
Vehicles with Instant Mobility System
(IMS) emergency flat tire repair kit
l
When a metallic device such as a non-
If an emergency tire repair is needed,
repair the punctured tire with the
emergency flat tire repair kit (page 7-5).
genuine navigation system is equipped
near the center of the dashboard, which
may block radio signals from the tire
pressure sensor to the receiver unit.
l
When using the following devices in
the vehicle that may cause radio
interference with the receiver unit.
CAUTION
Do not use non-genuine tire sealant. It
may damage the tire pressure sensor.
l
A digital device such as a personal
computer.
A current converter device such as a
DC-AC converter.
Vehicles with optional temporary spare
tire
l
If you have bought the optional temporary
spare tire, replace the punctured tire with
the temporary spare tire . Refer to the
manufacturer's instructions.
l
When excess snow or ice adheres to
the vehicle, especially around the
wheels.
l
When the tire pressure sensor batteries
are exhausted.
NOTE
l
When using a wheel with no tire
A tire pressure sensor is not installed to
the temporary spare tire. The warning
light will flash continuously while the
temporary spare tire is being used.
pressure sensor installed.
l
When using tires with steel wire
reinforcement in the side walls.
l
When using tire chains.
5-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page160
Thursday, August 25 2005 4:54 PM
Black plate (160,1)
Driving Your Mazda
Starting and Driving
When changing tires yourself
qTires and Wheels
If you or someone else changes tires, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.
CAUTION
When inspecting or adjusting the tire air
pressures, do not apply excessive force
to the stem part of the wheel unit. The
stem part could be damaged.
1. After tires have been changed, turn the
ignition switch to the ON position, then
turn it back to the ACC or LOCK
position.
Changing tires and wheels
2. Wait for about 15 minutes.
The following procedure allows the
TPMS to recognize a tire pressure sensor's
unique ID signal code whenever tires or
wheels are changed, such as changing to
and from winter tires.
3. After about 15 minutes, drive the
vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.
NOTE
NOTE
Each tire pressure sensor has a unique
ID signal code. The signal code must be
registered with the TPMS before it can
work. The easiest way to do it is to have
an Authorized Mazda Dealer change
your tire and complete ID signal code
registration.
If the vehicle is driven within about 15
minutes of changing tires, the tire
pressure monitoring system warning
light will flash because the sensor ID
signal code would not have been
registered. If this happens, park the
vehicle for about 15 minutes, after
which the sensor ID signal code will
register upon driving the vehicle for 10
minutes.
When having tires changed at an
Authorized Mazda Dealer
Tire pressure sensor ID signal code
registration is completed when an
Authorized Mazda Dealer changes your
vehicle's tires.
5-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page161
Thursday, August 25 2005 4:54 PM
Black plate (161,1)
Driving Your Mazda
Starting and Driving
Replacing tires and wheels
NOTE
l
The tire pressure sensor ID signal
code must be registered when a new
tire pressure sensor is purchased. For
purchase of a tire pressure sensor and
registration of the tire pressure
sensor ID signal code, consult an
Authorized Mazda Dealer.
CAUTION
l
When replacing/repairing the tires or
wheels or both, have the work done
by an Authorized Mazda Dealer, or
the tire pressure sensors may be
damaged.
l
When reinstalling a previously
removed tire pressure sensor to a
wheel, replace the grommet for the
tire pressure sensor.
l
The wheels equipped on your Mazda
are specially designed for installation
of the tire pressure sensors. Do not
use non-genuine wheels, otherwise it
may not be possible to install the tire
pressure sensors.
Be sure to have the tire pressure sensors
installed whenever tires or wheels are
replaced.
When having a tire or wheel or both
replaced, the following types of tire
pressure sensor installation are possible.
l
The tire pressure sensor is removed
from the old wheel and installed to the
new one.
l
The same tire pressure sensor is used
with the same wheel. Only the tire is
replaced.
l
A new tire pressure sensor is installed
to a new wheel.
5-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page162
Thursday, August 25 2005 4:54 PM
Black plate (162,1)
Driving Your Mazda
Instrument Cluster and Indicators
Meters and Gauges
When the ignition switch is in the ON position, the dashboard gauges illuminate.
5-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page163
Thursday, August 25 2005 4:54 PM
Black plate (163,1)
Driving Your Mazda
Instrument Cluster and Indicators
qSpeedometer
qOdometer, Trip Meter and Trip
Meter Selector
The speedometer indicates the speed of
the vehicle.
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
qSpeed Unit Selector
In some countries, you may have to
change the speed units between km/h and
mph.
Trip meter selector
Press the speed unit selector for 2 second
or more.
The speed units for the speedometer will
change between km/h and mph.
Trip meter
Odometer
Speed unit selector
Trip meter A
Speedometer
NOTE
Odometer
Odometer and trip meter distance units
will change between kilometers and
miles in accordance with the speed unit.
Press the selector
Trip meter B
Odometer
Press the selector
5-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page164
Thursday, August 25 2005 4:54 PM
Black plate (164,1)
Driving Your Mazda
Instrument Cluster and Indicators
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to “0.0” by holding
the selector depressed for more than 1
second. Use this meter to measure trip
distances and to compute fuel
NOTE
When the ignition switch is in the ACC
or LOCK position, the odometer or trip
meters cannot be displayed, however,
pressing the selector button can
inadvertently switch the trip meters or
reset them during an approximate ten-
minute period in the following cases:
consumption.
NOTE
l
After the ignition switch is turned to
the ACC or LOCK position from the
ON position.
l
Only the trip meters record tenths of
kilometers (miles).
l
The trip record will be erased when:
l
After any door is opened.
l
The power supply is interrupted
(blown fuse or the battery is
disconnected).
The vehicle is driven over 999.9
km (mile).
Odometer
The odometer records the total distance
the vehicle has been driven.
l
Trip meter
qTachometer
The trip meter can record the total
distance of two trips. One is recorded in
trip meter A, and the other is recorded in
trip meter B.
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
Automatic transmission
For instance, trip meter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
Striped zone
Red zone
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
5-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page165
Thursday, August 25 2005 4:54 PM
Black plate (165,1)
Driving Your Mazda
Instrument Cluster and Indicators
Manual transmission
q
Engine Coolant Temperature Gauge
The engine coolant temperature gauge
shows the temperature of the engine
coolant.
Striped zone
Red zone
CAUTION
Don't run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine damage.
If the needle is near H, it indicates
overheating.
CAUTION
NOTE
Driving with an overheated engine can
cause serious engine damage (page
l
The beep sounds to indicate engine
overrev when the tachometer needle
enters the striped zone.
l
To protect the engine, when the
engine coolant temperature is low,
the engine does not run at high
speeds. The fuel supply will be cut at
an rpm lower than the red zone.
5-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page166
Thursday, August 25 2005 4:54 PM
Black plate (166,1)
Driving Your Mazda
Instrument Cluster and Indicators
qFuel Gauge
qEngine Oil Pressure Gauge
The fuel gauge shows approximately how
much fuel is in the tank. We recommend
keeping the tank over 1/4 full. When the
low fuel warning light illuminates or
when the needle is near E, refuel as soon
as possible.
Engine oil pressure is normal when the
engine oil pressure gauge needle points
halfway between L and H with the engine
running.
Low fuel warning light
If the needle on the gauge doesn't move
after starting the engine, follow steps 1
through 3.
NOTE
The direction of the arrow ( ) shown
that the fuel-filler lid is on the left side
of the vehicle.
If the engine oil pressure gauge moves to
L (low) while you are driving, drive to the
side of the road and park off the right-of-
way. Set the parking brake. Then follow
steps 1 through 3.
1. Turn off the engine and inspect the
add oil.
2. Start the engine.
3. If the needle still doesn't move, have
your vehicle checked at an Authorized
Mazda Dealer.
CAUTION
Don't run the engine if the oil pressure
is low. It could result in extensive
engine damage.
5-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page167
Thursday, August 25 2005 4:54 PM
Black plate (167,1)
Driving Your Mazda
Instrument Cluster and Indicators
NOTE
Bright
Dim
The Mazda RX-8 requires regular
checking of the engine oil level. The
compact, high performance RENESIS
rotary engine in your vehicle consumes
a small amount of engine oil due to its
structural design. An oil pump
optimizes the amount of oil injected to
lubricate the rotor seals in the
combustion cycle. Although your
vehicle is equipped with an engine oil
level warning light and an engine oil
pressure gauge, it is best to keep the
engine oil level in the range between
full and low by checking the oil
dipstick regularly. Mazda recommends
checking the oil level at every second
fuel filling. The oil consumption of the
engine depends on engine speed and
engine load. Under extreme driving
conditions, oil consumption can be
higher.
Canceling the illumination dimmer
When the headlight switch is in the or
position, the illumination of the
instrument cluster and the information
display dims (the instrument cluster
illumination color turns to red).
When driving on snowy or foggy roads,
or in other situations when the instrument
cluster or information display's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer and increase the illumination
intensity.
qDashboard Illumination
Rotate the thumb wheel to adjust the
brightness of the instrument cluster and
other illuminations in the dashboard.
To cancel the illumination dimmer, rotate
the thumb wheel upward fully. You may
hear a click sound and the illumination
dimmer will be canceled (instrument
cluster illumination color turns to white).
NOTE
l
The brightness of dashboard
illuminations (except instrument
cluster) can be adjusted when the
headlight switch is in the or
position.
NOTE
If the dashboard illumination switch is
kept at the illumination dimmer cancel
position, the instrument cluster and the
information display will not dim when
the headlight switch is turned to the
l
The brightness of the instrument
cluster illumination can be adjusted
when the headlight switch is in any
position.
or
position again.
5-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page168
Thursday, August 25 2005 4:55 PM
Black plate (168,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Warning/Indicator Lights
Warning/Indicator lights will appear in any of the highlighted areas
Signal
Warning/Indicator Lights
Brake System Warning Light
Page
Charging System Warning Light
Engine Oil Level Warning Light
Engine Coolant Level Warning Light
Check Engine Light
ABS Warning Light
Air Bag/Front Seat Belt Pretensioner System Warning Light
Low Fuel Warning Light
Seat Belt Warning Light/Beep
5-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page169
Thursday, August 25 2005 4:55 PM
Black plate (169,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Signal
Warning/Indicator Lights
Door-Ajar Warning Light
Page
Low Washer Fluid Level Warning Light
Automatic Transmission Warning Light
Tire Pressure Monitoring System Warning Light
KEY Warning Light (Red)/KEY Indicator Light (Green)
Security Indicator Light
Headlight High-Beam Indicator Light
Shift Position Indicator Light
TCS/DSC Indicator Light
DSC OFF Indicator Light
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)
Light-On Indicator Light
Power Steering Malfunction Indicator Light
Headlight Auto-Leveling Malfunction Indicator Light
Turn Signal/Hazard Warning Indicator Lights
5-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page170
Thursday, August 25 2005 4:55 PM
Black plate (170,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qBrake System Warning Light
NOTE
Having to add brake fluid is sometimes
an indicator of leakage. Consult an
Authorized Mazda Dealer as soon as
possible even if the brake light is no
longer illuminated.
This warning has the following functions:
WARNING
Parking brake warning
Brake Warning Light:
The light comes on when the parking
brake is applied with the ignition switch
in the START or ON position. It goes off
when the parking brake is fully released.
Driving with the brake system warning
light on is dangerous. It indicates that
your brakes may not work at all or
that they could completely fail at any
time. If this light remains on, after
checking that the parking brake is
fully released, have the brakes
inspected immediately. Don't drive
with this light on, have the vehicle
towed to an Authorized Mazda Dealer
to have the brakes inspected as soon
as possible.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
push or that it may go closer to the floor.
In either case, it will take longer to stop
the vehicle.
qABS Warning Light
1. With the engine stopped, check the
brake fluid level immediately and add
fluid as required (page 8-18).
2. After adding fluid, check the light
again.
The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
Even if the light goes out have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.
5-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page171
Thursday, August 25 2005 4:55 PM
Black plate (171,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
WARNING
ABS Warning Light and Brake
Warning Light on at the Same Time:
Driving when the brake system
warning light and ABS warning light
are on at the same time is dangerous.
When both lights are on, the rear
wheels could lock more quickly in an
emergency stop than under normal
circumstances.
Don't drive with both lights on, have
the vehicle towed to an Authorized
Mazda Dealer to have the brakes
inspected as soon as possible.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
NOTE
When the engine is jump-started to
charge the battery, uneven rpm occurs
and the ABS warning light comes on.
This is due to a weak battery, not a
malfunction.
Recharge the battery.
qElectronic Brake Force
qCharging System Warning Light
Distribution System Warning
This warning light illuminates when the
ignition switch is turned to the ON
position and turns off when the engine is
started.
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may turn the brake system
warning light and the ABS warning light
on at the same time. The problem is likely
to be an electronic brake force distribution
system.
If the warning light illuminates while
driving, it indicates a malfunction of the
alternator or of the charging system.
Drive to the side of the road and park off
the right-of-way. Consult an Authorized
Mazda Dealer.
5-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page172
Thursday, August 25 2005 4:55 PM
Black plate (172,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
CAUTION
CAUTION
Don't continue driving when the
charging system warning light is
illuminated because the engine could
stop unexpectedly.
Don't run the engine if the oil level is
low. It could result in extensive engine
damage.
NOTE
qEngine Oil Level Warning Light
The Mazda RX-8 requires regular
checking of the engine oil level. The
compact, high performance RENESIS
rotary engine in your vehicle consumes
a small amount of engine oil due to its
structural design. An oil pump
optimizes the amount of oil injected to
lubricate the rotor seals in the
This warning light indicates low engine
oil level.
combustion cycle. Although your
vehicle is equipped with an engine oil
level warning light and an engine oil
pressure gauge, it is best to keep the
engine oil level in the range between
full and low by checking the oil
dipstick regularly. Mazda recommends
checking the oil level at every second
fuel filling. The oil consumption of the
engine depends on engine speed and
engine load. Under extreme driving
conditions, oil consumption can be
higher.
If the light illuminates while driving:
1. Drive to the side of the road and park
off the right-of-way.
2. Turn off the engine and inspect the
add oil.
3. Check the light.
If the engine oil level warning light is
illuminated and you are unable to
immediately add engine oil, do not drive
at high speed, keep the engine speed low
and get to a location where oil can be
added as soon as possible. We recommend
an Authorized Mazda Dealer.
q
Engine Coolant Level Warning Light
If the light remains illuminated even after
you add oil, have your vehicle checked at
an Authorized Mazda Dealer.
This warning light indicates low engine
coolant level.
5-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page173
Thursday, August 25 2005 4:55 PM
Black plate (173,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
l
If the light illuminates while driving:
The fuel-filler cap is missing or not
tightened securely.
1. Drive to the side of the road and park
off the right-of-way.
If the check engine light remains on or
flashes continuously, do not drive at high
speeds and consult an Authorized Mazda
Dealer as soon as possible.
2. Turn off the engine and inspect the
low, add engine coolant.
3. Check the light.
q
Air Bag/Front Seat Belt
If the light remains illuminated even after
you add engine coolant, have your vehicle
towed to an Authorized Mazda Dealer.
Pretensioner System Warning Light
CAUTION
Don't run the engine if the engine
coolant level is low. It could result in
extensive engine damage.
If the air bag/front seat belt pretensioner
system is normal, the warning light
illuminates when the ignition switch is
turned to the ON position or after the
engine is cranked. After about 6 seconds
it goes out.
qCheck Engine Light
A system malfunction is indicated when
the warning light constantly flashes,
constantly illuminates or doesn't
illuminate at all when the ignition switch
is turned to the ON position. If any of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
If this light comes on while driving, the
vehicle may have a problem. It is
important to note the driving conditions
when the light came on and consult an
Authorized Mazda Dealer.
The check engine light may come on in
the following cases:
l
The fuel tank level being very low or
approaching empty.
l
The engine's electrical system has a
problem.
l
The emission control system has a
problem.
5-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page174
Thursday, August 25 2005 4:55 PM
Black plate (174,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Conditions of operation
WARNING
Condition
Result
The driver's seat belt is not The warning light
fastened when the ignition flashes and a beep
switch is turned to the ON sound will be heard
Self-Servicing the Air Bag/
Pretensioner Systems:
position.
for about 6 seconds.
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death. Never tamper
with the systems and always have an
Authorized Mazda Dealer perform all
servicing and repairs.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The warning light
turns off and the beep
sound stops.
The driver's seat belt is
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
The warning light will
position.
heard.
Belt minder
qLow Fuel Warning Light
NOTE
The belt minder can be deactivated.
Consult an Authorized Mazda Dealer to
deactivate and restore the seat belt
minder.
Low fuel warning light
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the warning light/beep
operates to give you further reminders
according to the chart below.
This warning light in the fuel gauge
signals that the fuel tank will soon be
empty.
Refuel as soon as possible.
qSeat Belt Warning Light/Beep
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
Indicator
Beep
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
5-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page175
Thursday, August 25 2005 4:56 PM
Black plate (175,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period (90 seconds) has passed.
qAutomatic Transmission Warning
Light
qDoor-Ajar Warning Light
This warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
The light illuminates when the
transmission has a problem.
This warning light comes on when any
door isn't securely closed.
CAUTION
qLow Washer Fluid Level
If the automatic transmission warning
light illuminates, the transmission has
an electrical problem. Continuing to
drive your Mazda in this condition
could cause damage to your
Warning Lightí
transmission. Consult an Authorized
Mazda Dealer as soon as possible.
qTire Pressure Monitoring System
Warning Lightí
This warning light indicates that little
washer fluid remains. Add fluid (page
This warning light illuminates for a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the warning light illuminates
when tire pressure is too low in one or
more tires, and flashes when there is a
system malfunction.
íSome models.
5-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page176
Thursday, August 25 2005 4:56 PM
Black plate (176,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Adjust the tire pressure to the correct tire
pressure. Refer to the specification charts
(page 10-6).
WARNING
Vehicle Handling When Tire Pressure
Monitoring System Warning Light
Illuminates/Flashes:
CAUTION
When the tire pressure monitoring
system warning light illuminates or
flashes, or the tire pressure warning
beep sound is heard, it is dangerous to
drive the vehicle at high speeds, or
perform sudden maneuvering or
braking. Vehicle drivability could
worsen and result in an accident.
When the tire pressure monitoring
system warning light illuminates or
flashes, or the tire pressure warning
beep sound is heard, decrease vehicle
speed immediately and avoid sudden
maneuvering and braking. Have the
system and tires checked or perform
the appropriate repair as soon as
possible by an Authorized Mazda
Dealer.
When replacing/repairing the tires or
wheels or both, have the work done by
an Authorized Mazda Dealer, or the tire
pressure sensors may be damaged.
NOTE
l
Perform tire pressure adjustment
when the tires are cold. Tire pressure
will vary according to the tire
temperature, therefore let the vehicle
stand for 1 hour or only drive it 1.6
km (1 mile) or less before adjusting
the tire pressures. When pressure is
adjusted on hot tires to the cold
inflation pressure, the TPMS
warning light/beep may turn on after
the tires cool and pressure drops
below specification.
Ignoring the Warning Light:
Also, an illuminated TPMS warning
light, resulting from the tire air
pressure dropping due to cold
ambient temperature, may go out if
the ambient temperature rises. In this
case, it will also be necessary to
adjust the tire air pressures. If the
TPMS warning light illuminates due
to a drop in tire air pressure, make
sure to check and adjust the tire air
pressures.
Ignoring the warning light is
dangerous, even if you know why it is
illuminated. Have the problem taken
care of as soon as possible before it
develops into a more serious situation
that could lead to tire failure and a
dangerous accident.
Warning light illuminates/Warning
beep sounds
When the warning light illuminates, and
the warning beep sound is heard (about 3
seconds), tire pressure is too low in one or
more tires.
5-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page177
Thursday, August 25 2005 4:56 PM
Black plate (177,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Warning light flashes
NOTE
When the warning light flashes, there may
be a system malfunction. Consult an
Authorized Mazda Dealer.
l
After adjusting the tire air pressures,
it may require some time for the
TPMS warning light to go out. If the
TPMS warning light remains
illuminated, drive the vehicle at a
speed of at least 25 km/h (16 mph)
for 10 minutes, and then verify that it
goes out.
qKEY Warning Light (Red)/KEY
Indicator Light (Green) (with
Advanced Key)
If the warning light illuminates again even
after the tire pressures are adjusted, there
may be a tire puncture.
Vehicles with Instant Mobility System
(IMS) emergency flat tire repair kit
This indicator has two colors.
KEY Warning Light (Red)
When illuminated
If an emergency tire repair is needed,
repair the punctured tire with the
emergency flat tire repair kit (page 7-5).
l
When the ignition switch is turned to
the ON position, it illuminates
momentarily and then goes out.
CAUTION
l
Do not use non-genuine tire sealant. It
may damage the tire pressure sensor.
If any malfunction occurs in the
advanced keyless system, it illuminates
continuously.
Vehicles with optional temporary spare
tire
WARNING
If you have bought the optional temporary
spare tire, replace the punctured tire with
the temporary spare tire . Refer to the
manufacturer's instructions.
KEY Warning Light:
If the KEY warning light remains
illuminated, do not continue to drive
using the advanced key system. Park
the vehicle in a safe place and use the
auxiliary key to continue driving the
vehicle. Have the vehicle inspected at
an Authorized Mazda Dealer as soon
as possible.
NOTE
A tire pressure sensor is not installed to
the temporary spare tire. The warning
light will flash continuously while the
temporary spare tire is being used.
5-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page178
Thursday, August 25 2005 4:56 PM
Black plate (178,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
When flashing
KEY Indicator Light (Green)
When illuminated
l
Under the following conditions, the
KEY warning light (red) flashes to
inform the driver that the start knob
will not rotate to the ACC position
even if it is pushed in from the LOCK
position.
When the start knob is pushed in from the
LOCK position, the system confirms that
the correct advanced key is inside the
vehicle, the KEY indicator light (green)
illuminates, and the start knob can be
turned to the ACC position (page 3-10).
l
The advanced key battery is dead.
The advanced key is not within
l
When flashing
operational range.
The advanced key is placed in areas
l
When the advanced key battery power is
low, the KEY indicator light flashes for 30
seconds after the start knob is turned from
the ON position to the ACC or LOCK
position. Replace with a new battery
before the advanced key becomes
unusable (page 3-6).
where it is difficult for the system to
detect the signal (page 3-7).
A key from another manufacturer
l
similar to the advanced key is in the
operational range.
l
Under the following conditions, the
KEY warning light (red) will flash
continuously when the start knob has
not been returned to the LOCK
position to notify the driver that the
advanced key has been removed from
the vehicle. It will stop flashing when
the advanced key is back inside the
vehicle.
NOTE
The advanced key can be set so that the
KEY indicator light (green) does not
flash even if the battery power is low.
Refer to Setting Change (Function
Customization)(page 3-20).
l
The start knob has not been returned
qSecurity Indicator Light
to the LOCK position, the driver's
door is open, and the advanced key
is removed from the vehicle.
l
The start knob has not been returned
to the LOCK position and all the
doors are closed after removing the
advanced key from the vehicle.
This indicator light starts flashing every 2
seconds when the ignition switch is turned
from the ON to the ACC position and the
immobilizer system is armed.
NOTE
The flashing KEY warning light (red)
and the beep sound operate
simultaneously (page 3-21).
5-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page179
Thursday, August 25 2005 4:56 PM
Black plate (179,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
The light stops flashing when the ignition
switch is turned to the ON position with
the correct ignition key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then goes out.
qShift Position Indicator Light
(Automatic Transmission)
This indicates the selected shift position
when the ignition switch is in the ON
position.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
qHeadlight High-Beam Indicator
Light
This light indicates one of two things:
Gear position indicator
l
The high-beam headlights are on.
l
The turn signal lever is in the flash-to-
pass position.
Gear position indicator
When the shift lever is in the D or M
position, the numeral for the selected gear
displays.
5-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page180
Thursday, August 25 2005 4:56 PM
Black plate (180,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qTCS/DSC Indicator Lightí
NOTE
If the battery is disconnected or a fuse is
replaced, the DSC will be inoperable. In
this case, the DSC OFF indicator light
flashes and the TCS/DSC indicator light
illuminates.
To make the DSC operable, do the
following procedure with the battery
connected.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
1. Turn the ignition switch to the ON
position.
2. Turn the steering clockwise fully,
then turn it counterclockwise fully.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
3. Make sure the DSC OFF indicator
goes off.
4. Turn the ignition switch to the OFF
position, then turn it to the ON
position again.
qDSC OFF Indicator Lightí
5. Make sure the TCS/DSC indicator
light goes off.
If the TCS/DSC indicator light and the
DSC OFF indicator light remain
illuminated even after turning the
ignition switch to the ON position,
consult an Authorized Mazda Dealer.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also comes on when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-25).
qCruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green)
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
The indicator light has two colors.
5-50
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page181
Thursday, August 25 2005 4:56 PM
Black plate (181,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Cruise Main Indicator Light (Amber)
NOTE
The indicator light illuminates amber
when the ON/OFF switch is pressed and
the cruise control system is activated.
The power steering system is inoperable
when the power steering malfunction
indicator light illuminates. Steering is
possible, but requires more physical
effort.
Cruise Set Indicator Light (Green)
The indicator light illuminates green when
a cruising speed has been set.
qHeadlight Auto-Leveling
Malfunction Indicator Lightí
qLight-On Indicator Light
This indicator light comes on when the
exterior lights and dashboard illumination
are on.
This indicator light stays on far a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the indicator light will
illuminate when the headlight auto-
leveling system has a malfunction.
qPower Steering Malfunction
Indicator Light
If the indicator light illuminates, contact
an Authorized Mazda Dealer.
qTurn-Signal/Hazard Warning
Indicator Lights
This indicator light illuminates when the
ignition switch is turned to the ON
position and goes off when the engine is
started.
If this light illuminates while driving, it
indicates a malfunction of the power
steering system. Consult an Authorized
Mazda Dealer.
When operating the turn signal lights, the
left or right turn signal indicator light
flashes to indicate which turn signal light
is operating (page 5-56).
íSome models.
5-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page182
Thursday, August 25 2005 4:56 PM
Black plate (182,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
When operating the hazard warning
lights, both turn signal indicator lights
flash (page 5-61).
Beep Sounds
qSeat Belt Warning Beep
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, a beep sound will be heard
for about 6 seconds.
If the driver's seat belt is not fastened and
the vehicle is driven at a speed faster than
about 20 km/h (12 mph), a beep sound
will be heard again for about 90 seconds
(the beep sound speeds up as time
elapses).
NOTE
If an indicator light remains illuminated
(does not flash) or if it flashes
abnormally, one of the turn signal bulbs
may be burned out.
Refer to Seat Belt Warning Light/Beep on
page 5-44.
qIgnition Key Reminder
If the ignition switch is in the LOCK or
ACC position with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
NOTE
When the advanced keyless function is
used and the start knob is in the ACC
position, the “Start Knob Not in LOCK
the lights-on reminder.
5-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page183
Thursday, August 25 2005 4:56 PM
Black plate (183,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qEngine Overrev Warning Beep
The beep sounds to indicate engine
overrev when the tachometer needle
enters the striped zone (page 5-34).
qTire Inflation Pressure Warning
Beepí
The warning beep sound will be heard for
about 3 seconds when there is any
abnormality in tire inflation pressures
(page 5-26).
qAdvanced Keyless Warning (with
Advanced Key)
Warning indicators for the advanced key,
such as “the advanced key removed from
vehicle warning”, use a beep sound and
warning/indicator lights in the instrument
cluster.
Refer to Warning and Beep Sounds on
page 3-18.
íSome models.
5-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page184
Thursday, August 25 2005 4:56 PM
Black plate (184,1)
Driving Your Mazda
Switches and Controls
Lighting Control
WARNING
Xenon Fusion Bulb Replacement:
Replacing the xenon fusion bulbs by
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Do not replace the xenon
fusion bulbs by yourself. Consult an
Authorized Mazda Dealer when the
replacement is necessary.
qHeadlights
NOTE
To turn on the lights, turn the headlight
switch on the end of the control lever.
If the headlights flash, or the brightness
weakens, the bulb-life may be depleted
and a replacement is necessary. Consult
an Authorized Mazda Dealer.
Switch Position
Headlights
Off
Off
Off
On
On
On
Taillights
Parking lights
License lights
Side-marker lights
Dashboard
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
illumination
NOTE
NOTE
To prevent discharging the battery, don't
leave the lights on while the engine is
off unless safety requires them.
When the advanced keyless function is
used and the start knob is in the ACC
position, the “Start Knob Not in LOCK
the lights-on reminder.
í
Xenon fusion headlight bulbs
The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
5-54
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page185
Thursday, August 25 2005 4:56 PM
Black plate (185,1)
Driving Your Mazda
Switches and Controls
qHeadlight High-Low Beam
qHeadlight Levelingí
Push the lever forward for high beam.
Pull back to original position for low
beam.
The number of riders and weight of cargo
in the luggage compartment change the
angle of the headlights.
The angle of the headlights will be
automatically adjusted when turning on
the headlights.
High beam
Headlight auto-leveling malfunction
indicator light
Low beam
qFlashing the Headlights
This indicator light stays on far a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the indicator light will
illuminate when the headlight auto-
leveling system has a malfunction.
To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
If the indicator light illuminates, contact
an Authorized Mazda Dealer.
q
Daytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Daytime Running Lights turn off
when the parking brake is applied.
íSome models.
5-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page186
Thursday, August 25 2005 4:56 PM
Black plate (186,1)
Driving Your Mazda
Switches and Controls
Fog Lightsí
Turn and Lane-Change
Signals
Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
qTurn Signal
To turn the front fog lights on, rotate the
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
fog light switch to the
position.
The headlight switch must be in the
position to turn on the front fog lights.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right turn
Right lane
change
Fog light switch
OFF
Left lane
change
To turn them off, rotate the fog light
switch to the OFF position or turn the
headlight switch to the or OFF
position.
Left turn
Green indicators on the dashboard show
which signal is working.
NOTE
Lane-change signals
The fog lights will turn off when the
headlights are set at high beam.
Move the lever slightly toward the
direction of the change ―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, one
of the turn signal bulbs may be burned
out.
5-56
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page187
Thursday, August 25 2005 4:56 PM
Black plate (187,1)
Driving Your Mazda
Switches and Controls
NOTE
Windshield Wipers and
Washer
Because heavy ice and snow can jam
the wiper blades, the wiper motor is
protected from motor breakdown,
overheating and possible fire by a
circuit breaker. This mechanism will
automatically stop operation of the
blades, but only for about 5 minutes.
If this happens, turn off the wiper
switch and park off the right-of-way,
and remove the snow and ice.
After 5 minutes, turn on the switch and
the blades should operate normally. If
they don't resume functioning, consult
an Authorized Mazda Dealer as soon as
possible. Drive to the side of the road
and park off the right-of-way. Wait until
the weather clears before trying to drive
with the wipers inoperative.
The ignition switch must be in the ON
position.
WARNING
Substitute Washer Fluid:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the windshield,
affect your visibility, and could result
in an accident. Use only windshield
washer fluid or plain water in the
reservoir.
Frozen Washer Fluid:
Using windshield washer fluid without
anti-freeze protection in freezing
temperatures is dangerous. The
washer fluid could freeze on the
windshield and block your vision. You
could have an accident. Don't use the
washer without first warming the
windshield and never use plain tap
water.
qWindshield Wipers
Turn the wipers on by pulling the lever
down.
MIST ― Mist
INT ― Intermittent
1 ― Low speed
2 ― High speed
For a single wiping cycle, push the lever
up to MIST.
5-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page188
Thursday, August 25 2005 4:56 PM
Black plate (188,1)
Driving Your Mazda
Switches and Controls
Variable-speed intermittent wipers
NOTE
Set the lever to INT and choose the
interval timing by rotating the ring.
(With headlight washers)
When the headlights are on, the
headlight washers operate automatically
once every fifth time the windshield
washer operates.
Refer to Headlight Washer (page 5-59).
INT ring
qWindshield Washer
Pull the lever toward you and hold it to
spray washer fluid.
OFF
Washer
NOTE
With the wiper lever in the OFF or INT
position, the wipers will operate
continuously until the lever is released.
If the washer doesn't work, inspect the
an Authorized Mazda Dealer.
5-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page189
Thursday, August 25 2005 4:56 PM
Black plate (189,1)
Driving Your Mazda
Switches and Controls
Headlight Washerí
Rear Window Defroster
The ignition switch must be in the ON
position and the headlights must be turned
on.
The rear window defroster clears frost,
fog, and thin ice from the rear window.
The ignition switch must be in the ON
position.
The headlight washers operate
automatically once every fifth time the
windshield washer operates.
Press the switch to turn on the rear
window defroster. The rear window
defroster operates for about 15 minutes
and turns off automatically.
The indicator light illuminates during
operation.
If you want to operate only the headlight
washers, pull the windshield wiper lever
toward you twice rapidly.
To turn off the rear window defroster
before the 15 minutes has elapsed, press
the switch again.
OFF
Indicator light
Washer
NOTE
When you pull the windshield wiper
lever twice, the windshield washer may
spray a little.
CAUTION
Don't use sharp instruments or window
cleaners with abrasives to clean the
inside of the rear window surface. They
may damage the defroster grid inside
the window.
íSome models.
5-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page190
Thursday, August 25 2005 4:56 PM
Black plate (190,1)
Driving Your Mazda
Switches and Controls
NOTE
Horn
This defroster is not designed for
melting snow. If there is an
accumulation of snow on the rear
window, remove it before using the
defroster.
To sound the horn, press around the
mark on the steering wheel.
5-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page191
Thursday, August 25 2005 4:56 PM
Black plate (191,1)
Driving Your Mazda
Switches and Controls
Hazard Warning Flasher
HomeLink Wireless
Control Systemí
The hazard warning lights should always
be used when you stop on or near a
roadway.
NOTE
HomeLink and HomeLink house are
registered trademarks of Johnson
Controls.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
The HomeLink system replaces up to 3
hand-held transmitters with a single built-
in component in the auto-dimming mirror.
Pressing the HomeLink button on the
auto-dimming mirror activates garage
doors, gates and other devices
Hazard warning flasher
surrounding your home.
Indicator light
Depress the hazard warning flasher and all
four turn signals will flash.
NOTE
HomeLink button
l
The turn signals don't work when the
hazard warning lights are on.
l
Check local regulations about the use
of hazard warning lights while the
vehicle is being towed. They may
forbid it.
íSome models.
5-61
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page192
Thursday, August 25 2005 4:56 PM
Black plate (192,1)
Driving Your Mazda
Switches and Controls
NOTE
WARNING
FCC ID: NZLSTDHL3
Safety Stop and Reverse Feature:
Using the HomeLink system with any
garage door opener that lacks the
safety stop and reverse feature as
required by federal safety standards is
dangerous. (This includes garage
doors manufactured before April 1,
1982.)
Using these garage door openers can
increase the risk of serious injury or
death. For further information,
contact HomeLink at 1-800-355-3515
or www.homelink.com or your
Authorized Mazda Dealer.
CANADA:4112104541A
This device complies with FCC rules
part 15. Operation is subject to the
following conditions:
1- This device may not cause any
harmful interference and
2- This device must accept any
interference that may be received
including interference that may cause
undesired operation.
NOTE
The programming will not be erased
even if the battery is disconnected.
Safety While Programming or
Operating HomeLink System:
Programming or operating the
HomeLink system without verifying
the safety of areas surrounding garage
doors and gates is dangerous and
could result in an unexpected accident
and serious injury if someone were to
be hit. Always check the areas
surrounding garage doors and gates
for people or obstructions before
programming or during operation of
the HomeLink system.
qPre-programming the HomeLink
System
NOTE
It is recommended that a new battery be
placed in the hand-held transmitter of
the device being programmed to
HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
l
Verify that there is a remote control
CAUTION
transmitter available for the device you
would like to program.
HomeLink has been tested and
complies with FCC and Industry
Canada rules. Changes or modifications
not expressly approved by the party
responsible for compliance could void
the user's authority to operate the
device.
l
Disconnect the power to the device.
5-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page193
Thursday, August 25 2005 4:56 PM
Black plate (193,1)
Driving Your Mazda
Switches and Controls
4. After the HomeLink indicator light
changes from a slow to a rapidly
blinking light, release both the
HomeLink and hand-held transmitter
buttons.
q
Programming the HomeLink System
CAUTION
When programming a garage door
opener or a gate, disconnect the power
to these devices before performing
programming, as continuous operation
of the devices could damage the motor.
NOTE
If the HomeLink indicator light does
not change to a rapidly blinking light,
contact HomeLink at
The HomeLink system provides 3 buttons
which can be individually selected and
programmed using the transmitters for
current, on-market devices as follows:
www.homelink.com or call 1-800-355-
3515 for assistance.
5. Press and hold the just-trained
HomeLink button and observe the
indicator light.
1. Press and hold the two outer
HomeLink buttons (buttons one and
three) ― releasing only when the
indicator light begins to flash (after 20
seconds). Do not hold the buttons for
longer than 30 seconds and do not
repeat step 1 to program a second and/
or third hand-held transmitter to the
remaining two HomeLink buttons.
If the indicator light stays on constantly,
programming is complete and your
device should activate when the
HomeLink button is pressed and released.
NOTE
To program the remaining two
HomeLink buttons, begin with
“Programming” ― step 2. Do not
repeat step 1.
2. Position the end of your hand-held
transmitter 2.5―7.5 cm (1―3 inches)
away from the HomeLink button you
wish to program while keeping the
indicator light in view.
If the indicator light blinks rapidly for
two seconds and then turns to a
constant light, continue with
“Programming” steps 6―8 to complete
the programming of a rolling code
equipped device (most commonly a
garage door opener).
3. Simultaneously press and hold both the
chosen HomeLink and hand-held
transmitter buttons. Do not release the
buttons until step 4 has been
completed.
NOTE
6. At the garage door opener receiver
(motor-head unit) in the garage, locate
the “learn” or “smart” button. This can
usually be found where the hanging
antenna wire is attached to the motor-
head unit.
Some gate operators and garage door
openers may require you to replace this
Programming Step 3 with procedures
noted in the “Gate Operator/Canadian
Programming” section.
5-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page194
Thursday, August 25 2005 4:56 PM
Black plate (194,1)
Driving Your Mazda
Switches and Controls
7. Firmly press and release the “learn” or
“smart” button. (The name and color of
the button may vary by manufacturer.)
qGate operator/Canadian
Programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission ―
which may not be long enough for
HomeLink to pick up the signal during
programming. Similar to this Canadian
law, some U.S. gate operators are
designed to “time-out” in the same
manner.
NOTE
There are 30 seconds in which to
initiate step 8.
8. Return to the vehicle and firmly press,
hold for two seconds and release the
programmed HomeLink button. Repeat
the “press/hold/release” sequence a
second time, and, depending on the
brand of the garage door opener (or
other rolling code equipped device),
repeat this sequence a third time to
complete the programming process.
If you live in Canada or you are having
difficulties programming a gate operator
by using the “Programming” procedures
(regardless of where you live), replace
“Programming HomeLink” step 3 with
the following:
HomeLink should now activate your
rolling code equipped device.
NOTE
If programming a garage door opener or
gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.
NOTE
To program the remaining two
HomeLink buttons, begin with
“Programming” ― step 2. Do not
repeat step 1.
Continue to press and hold the HomeLink
button while you press and release ―
every two seconds (“cycle”) your hand-
held transmitter until the frequency signal
has successfully been accepted by
HomeLink. (The indicator light will flash
slowly and then rapidly.)
For questions or comments, please contact
HomeLink at www.homelink.com or 1-
800-355-3515.
Proceed with “Programming” step 4 to
complete.
qOperating the HomeLink System
Press the programmed HomeLink button
to operate a programmed device. The
code will continue being transmitted for a
maximum of 20 seconds.
5-64
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page195
Thursday, August 25 2005 4:56 PM
Black plate (195,1)
Driving Your Mazda
Switches and Controls
qReprogramming the HomeLink
system
To program a device to HomeLink using a
HomeLink button previously trained,
follow these steps:
1. Press and hold the desired HomeLink
button. DO NOT release the button.
2. The indicator light will begin to flash
after 20 seconds. Without releasing the
HomeLink button, proceed with
“Programming” - step 2.
qErasing Programmed HomeLink
Buttons
To erase the existing programming from
all three operating channels, press and
hold the two outside buttons (
,
)
on the auto-dimming mirror until the
HomeLink indicator light begins to flash
after approximately 20 seconds.
Verify that the programming has been
erased when you resell the vehicle.
5-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page196
Thursday, August 25 2005 4:56 PM
Black plate (196,1)
5-66
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page198
Thursday, August 25 2005 4:56 PM
Black plate (198,1)
Interior Comfort
Climate Control System
qParking in Direct Sunlight
Operating Tips
If the vehicle has been parked in direct
sunlight during hot weather, open the
windows to let warm air escape, then run
the climate control system.
qOperating the Climate Control
System
Operate the climate control system with
the engine running.
qNot Using for a Long Period
Run the air conditioner about 10 minutes
at least once a month to keep internal
parts lubricated.
NOTE
To prevent the battery from being
discharged, do not leave the fan control
dial on for a long period of time with
the ignition switch in the ACC position
when the engine is not running.
qCheck the Refrigerant before the
Weather Gets Hot
Have the air conditioner checked before
the weather gets hot. Lack of refrigerant
may make the air conditioner less
qClearing the Air Inlet
efficient. Consult an Authorized Mazda
Dealer for refrigerant inspection.
Clear all obstructions like leaves, snow
and ice from the hood and the air inlet in
the cowl grille to improve the system
efficiency.
The air conditioner is filled with
HFC134a (R134a), a refrigerant that will
not damage the ozone layer.
If the air conditioner is low on refrigerant
or has a malfunction, consult an
Authorized Mazda Dealer.
qFoggy Windows
The windows may fog up easily in humid
weather. Use the climate control system to
defog the windows.
q
Replacement of the Cabin Air Filter
To help defog the windows, operate the
air conditioner to dehumidify the air.
If your vehicle is equipped with an air
filter for the air conditioner, it is necessary
to change the filter periodically as
indicated in scheduled maintenance (page
8-3). Consult an Authorized Mazda
Dealer for replacement of the cabin air
filter.
NOTE
The air conditioner may be used along
with the heater to dehumidify the air.
qOutside/Recirculated Air Position
Use the outside air position in normal
conditions. The recirculated air position
should be used only when driving on
dusty roads or for quick cooling of the
interior.
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page199
Thursday, August 25 2005 4:56 PM
Black plate (199,1)
Interior Comfort
Climate Control System
Vent Operation
Center vents
Side vents
Center Vents
qAdjusting the Vents
Directing airflow
Side Vents
To adjust the direction of airflow, move
the adjustment knob.
To adjust the direction of airflow, open the
vents and rotate them left and right.
Knob
NOTE
When using the air conditioner, mist
may come out from the vents. This is
not a sign of trouble but a result of
humid air being suddenly cooled.
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page200
Thursday, August 25 2005 4:56 PM
Black plate (200,1)
Interior Comfort
Climate Control System
qSelecting the Airflow Mode
Dashboard Vents
Defroster and Floor Vents
Dashboard and Floor Vents
Defroster Vents
Floor Vents
6-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page201
Thursday, August 25 2005 4:56 PM
Black plate (201,1)
Interior Comfort
Climate Control System
Control Panel
Climate control information is displayed on the information display.
Windshield defroster switch
A/C Switch
Fan control dial
Air intake selector
Temperature control dial
Mode selector switch
Fan control dial
qControl Switches
Temperature control dial
Cold
Hot
This dial allows variable fan speeds.
0―Fan off
1―Low speed
2―Medium low speed
3―Medium high speed
4―High speed
This dial controls temperature. Turn it
clockwise for hot and counterclockwise
for cold.
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page202
Thursday, August 25 2005 4:56 PM
Black plate (202,1)
Interior Comfort
Climate Control System
Mode selector switch
Air intake selector
Press the mode selector switch to select
This switch controls the source of air
entering the vehicle.
Press the switch to alternate between the
NOTE
and
positions. The indicator
To set the air vent to
, press the
light for the selected mode will illuminate.
windshield defroster switch.
It is recommended that under normal
conditions the switch be kept in the
outside air position.
A/C switch
Outside air position (
)
Outside air is taken into the vehicle. Use
this position for normal ventilation and
heating.
Recirculated air position (
)
Outside air is shut off. Air within the
vehicle is recirculated.
Push the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
This position can be used when driving on
a dusty road or in similar conditions. It
also helps to provide quicker cooling of
the interior.
Push the switch once again to turn the air
conditioner off.
NOTE
The air conditioner may not function
when the outside temperature
approaches 0 °C (32 °F).
6-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page203
Thursday, August 25 2005 4:56 PM
Black plate (203,1)
Interior Comfort
Climate Control System
NOTE
WARNING
l
If the windshield fogs up easily, set
the mode selector switch to the
position.
The Recirculated Air Position:
Using the position in cold or
rainy weather will cause the windows
l
If cooler air is desired at face level,
set the mode selector switch at the
position and adjust the
temperature control dial to maintain
maximum comfort.
to fog up. Your vision will be
hampered, which could lead to a
serious accident. Do not use the
position in cold or rainy weather.
l
l
The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Windshield defroster switch
In the
,
, or
position, the
air conditioner is automatically
turned on (however, the indicator
light does not illuminate) and the
position is automatically
selected to defrost the windshield.
Press the switch to defrost the windshield
and front door windows.
In the
or
position, the
position cannot be changed to
position.
the
qHeating
1. Press the mode selector switch to the
position.
qCooling (With Air Conditioner)
1. Press the mode selector switch to the
position.
2. Set the temperature control dial to the
hot position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page204
Thursday, August 25 2005 4:56 PM
Black plate (204,1)
Interior Comfort
Climate Control System
q
Windshield Defrosting and Defogging
CAUTION
1. Press the windshield defroster switch.
When using the air conditioner while
driving up long hills or in heavy traffic,
closely monitor the temperature gauge
(page 5-35).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner off
(page 7-18).
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
WARNING
Foggy Windshield:
NOTE
Using the
position with the
temperature control set to the cold
position will cause the outside of the
windshield to fog up. Your vision will
be hampered, which could lead to a
serious accident. Set the temperature
control to the hot or warm position
l
When maximum cooling is desired,
set the temperature control dial to the
extreme cold position and set the air
intake selector to the
position,
then set the fan control dial to
position 4.
when using the
position.
l
If warmer air is desired at floor level,
set the mode selector switch at the
position and adjust the
NOTE
temperature control dial to maintain
maximum comfort.
l
For maximum defrosting, set the
temperature control dial to the
extreme hot position and the fan
control dial to position 4.
l
The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
l
l
If warm air is desired at the floor, set
the mode selector switch to the
position.
qVentilation
In the
,
, or
position, the
1. Press the mode selector switch to the
position.
air conditioner is automatically
turned on (however, the indicator
light does not illuminate) and the
position is automatically
2. Set the air intake selector to the
position.
selected to defrost the windshield.
In the
or
position, the
3. Set the temperature control dial to the
desired position.
position cannot be changed to
position.
the
4. Set the fan control dial to the desired
speed.
6-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page205
Thursday, August 25 2005 4:56 PM
Black plate (205,1)
Interior Comfort
Climate Control System
qDehumidifying (With Air
Conditioner)
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
1. Press the mode selector switch to the
desired position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
5. Turn on the air conditioner by pressing
the A/C switch.
NOTE
One of the functions of the air
conditioner is dehumidifying the air
and, to use this function, the
temperature does not have to be set to
cold. Therefore, set the temperature
control dial to the desired position (hot
or cold) and turn on the air conditioner
when you want to dehumidify the cabin
air.
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page206
Thursday, August 25 2005 4:56 PM
Black plate (206,1)
Interior Comfort
Audio System
Antenna
Operating Tips for Audio
System
qRear Window Antenna
The rear window antenna receives both
AM and FM signals.
WARNING
Do Not Adjust Audio While Driving
the Vehicle:
CAUTION
Adjusting the audio while driving the
vehicle is dangerous as it could
distract your attention from the vehicle
operation which could lead to a
serious accident. Always adjust the
audio while the vehicle is stopped.
Even if the audio control switches are
equipped on the steering wheel, learn
to use the switches without looking
down at them so that you can keep
your maximum attention on the road
while driving the vehicle.
When washing the inside rear window,
use a soft cloth dampened in lukewarm
water, gently wiping the antenna lines.
Use of glass cleaning products could
damage the antenna.
CAUTION
For the purposes of safe driving, adjust
the audio volume to a level that allows
you to hear sounds outside of the
vehicle.
NOTE
l
Do not use the audio for long periods
of time while the engine is off.
Otherwise the battery could go dead.
l
If a cellular phone or CB radio is
used in or near the vehicle, it could
cause noise to occur from the audio
system, however, this does not
indicate that the system has been
damaged.
6-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page207
Thursday, August 25 2005 4:56 PM
Black plate (207,1)
Interior Comfort
Audio System
Signals from an FM transmitter are similar
to beams of light because they do not
bend around corners, but they do reflect.
Unlike AM signals, FM signals cannot
travel beyond the horizon. Therefore, FM
stations cannot be received at the great
distances possible with AM reception.
qRadio Reception
AM characteristics
AM signals bend around such things as
buildings or mountains and bounce off the
ionosphere. Therefore, they can reach
longer distances than FM signals. Because
of this, two stations may sometimes be
picked up on the same frequency at the
same time.
Ionosphere
FM wave
AM wave
Ionosphere
FM wave
100—200 km (60—120 miles)
Atmospheric conditions can also affect
FM reception. High humidity will cause
poor reception. However, cloudy days
may provide better reception than clear
days.
Station 1
Station 2
FM characteristics
An FM broadcast range is usually about
40―50 km (25―30 miles) from the
source. Because of extra coding needed to
break the sound into two channels, stereo
FM has even less range than monaural
(non-stereo) FM.
Multipath noise
Since FM signals can be reflected by
obstructions, it is possible to receive both
the direct signal and the reflected signal at
the same time. This causes a slight delay
in reception and may be heard as a broken
sound or a distortion. This problem may
also be encountered when in close
FM Station
proximity to the transmitter.
40—50 km
(25—30 miles)
Reflected wave
Direct
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page208
Thursday, August 25 2005 4:56 PM
Black plate (208,1)
Interior Comfort
Audio System
Flutter/Skip noise
Strong signal noise
Signals from an FM transmitter move in
straight lines and become weak in valleys
between tall buildings, mountains, and
other obstacles. When a vehicle passes
through such an area, the reception
conditions may change suddenly, resulting
in annoying noise.
This occurs very close to a transmitter
tower. The broadcast signals are
extremely strong, so the result is noise and
sound breakup at the radio receiver.
Station drift noise
When a vehicle reaches the area of two
strong stations broadcasting at similar
frequencies, the original station may be
temporarily lost and the second station
picked up. At this time there will be some
noise from this disturbance.
Weak signal noise
In suburban areas, broadcast signals
become weak because of distance from
the transmitter. Reception in such fringe
areas is characterized by sound breakup.
Station 2
Station 1
88.1 MHz
88.3 MHz
6-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page209
Thursday, August 25 2005 4:56 PM
Black plate (209,1)
Interior Comfort
Audio System
l
If the cassette tape is loose, it may
produce poor sound or performance
during playback. Use a pencil or
qOperating Tips for Cassette Tape
Player
Cleaning the cassette tape player
something similar to remove any slack.
The tape head, capstans, and pinch rollers
will gather oxide residue from cassette
tapes. This can cause weak or wavering
sounds and damage to the cassette tapes
and player. Use a good quality head-
cleaning tape or a liquid cleaner cassette
tape to remove it.
Should the unit not operate normally,
consult an Authorized Mazda Dealer.
Never attempt to repair it or insert a
screwdriver or anything else.
l
l
Only cassette tapes that play no longer
than 90 minutes should be used.
Cassette tape exceeding 90 minutes are
thin and may easily break.
Handling the cassette tape player
The following precautions should be
observed.
Do not leave a cassette tape in the tape
player slot when not in use. Remove it
completely to permit the slot door to
close and to protect the mechanism
from dust.
l
Do not spill any liquid on the audio
system.
l
Store cassette tapes away from extreme
heat, magnetic fields, and direct
sunlight. Protect the exposed cassette
tape from dirt and damage. Store
cassette tapes in their original cases or
other protective cases.
l
Do not insert any objects, other than
cassette tape, into the slot.
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page210
Thursday, August 25 2005 4:56 PM
Black plate (210,1)
Interior Comfort
Audio System
l
The MD player can also play MDLPs
that have been recorded in MDLP
mode. (MDLPs bearing the
qOperating Tips for Mini Disc
(MD) Player
The following precautions should be
observed.
identification logo as shown below).
l
Do not spill any liquid on the audio
system.
l
When inserting the MD, make sure the
MD label is facing up, and the MD is
oriented to the insertion slot in the
direction of the arrow. If not inserted
correctly, the MD will be ejected, or
may remain stuck in the MD deck.
l
Do not insert any objects, other than
MDs, into the slot.
l
The MD player has been designed to
l
Do not touch the internal part of the
MD. If the MD shutter is slid open for
no reason, it may be broken.
play MDs bearing the identification
logo as shown. No other MDs can be
played.
l
Store MDs in their cases and away
from direct sunlight.
6-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page211
Thursday, August 25 2005 4:56 PM
Black plate (211,1)
Interior Comfort
Audio System
l
The CD revolves at high speed within
the unit. Defective (cracked or badly
bent) CDs should never be used.
qOperating Tips for CD Player/In-
Dash CD Changer
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in the
CD player/changer may become clouded
with condensation. At this time, the CD
will eject immediately when placed in the
unit. A clouded CD can be corrected
simply by wiping it with a soft cloth.
Clouded optical components will clear
naturally in about an hour. Wait for
normal operation to return before
l
Do not use non-conventional discs
such as heart-shaped, octagonal discs,
etc. The CD player/changer could be
damaged.
attempting to use the unit.
Handling the CD player/In-dash CD
changer
The following precautions should be
observed.
l
Do not spill any liquid on the audio
system.
l
A new CD may have rough edges on
its inner and outer perimeters. If a disc
with rough edges is used, proper
setting will not be possible and the CD
player/changer will not play the CD.
Remove the rough edges in advance by
using a ball-point pen or pencil as
shown below. To remove the rough
edges, rub the side of the pen or pencil
against the inner and outer perimeter of
the CD.
l
Do not insert any objects, other than
CDs, into the slot.
6-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page212
Thursday, August 25 2005 4:56 PM
Black plate (212,1)
Interior Comfort
Audio System
l
l
l
l
When driving over uneven surfaces,
the sound may jump.
Dust, finger smudges, and dirt can
decrease the amount of light reflected
from the signal surface, thus affecting
sound quality. If the CD should
become soiled, gently wipe it with a
soft cloth from the center of the CD to
the edge.
Do not use record sprays, antistatic
agents, or household spray cleaners.
Volatile chemicals such as benzine and
thinner can also damage the surface of
the CD and must not be used. Anything
that can damage, warp, or fog plastic
should never be used to clean CDs.
l
The CD player/changer has been
designed to play CDs bearing the
identification logo as shown. No other
discs can be played.
CDs, like traditional audio records, are
made of plastic. To avoid warping,
keep the CDs in their cases and do not
store them where they will be exposed
to direct sunlight.
l
l
The CD player/changer ejects the CD if
the CD is inserted upside down. Also
dirty and/or defective CDs may be
ejected.
l
Be sure never to touch the signal
surface when handling the CDs. Pick
up a CD by grasping the outer edge or
the edge of the hole and the outer edge.
8 cm (3 in) CDs and CD accessories
(e.g. 8 cm disc adapter) cannot be used
in the CD player/changer.
l
l
Do not insert cleaning discs in the CD
player/changer.
Do not insert any disc with a peel-off
or seal on it.
l
Do not stick paper or tape on the CD.
Avoid scratching the reverse side (the
side without a label).
6-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page213
Thursday, August 25 2005 4:56 PM
Black plate (213,1)
Interior Comfort
Audio System
Audio Set
CD Player
In-dash CD Changer
Illustration is of a representative audio unit.
Mini Disc (MD) Player
Cassette Tape Player
Power/Volume/Sound Controls .............................................................................. page 6-18
6-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page214
Thursday, August 25 2005 4:56 PM
Black plate (214,1)
Interior Comfort
Audio System
qPower/Volume/Sound Controls
Power/Volume dial
Audio control dial
Illustration is of a representative audio unit.
Power ON/OFF
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
Turn the ignition switch to the ACC or
ON position.
Audio sound adjustment
1. Press the audio control dial to select the
function. The selected function will be
indicated.
Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.
*
Standard audio-
equipped model
NOTE
To prevent the battery from being
discharged, do not leave the audio
system on for a long period of time
when the engine is not running.
Volume adjustment
*
To adjust the volume, turn the power/
volume dial.
6-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page215
Thursday, August 25 2005 4:57 PM
Black plate (215,1)
Interior Comfort
Audio System
BOSE Sound System-equipped model
BOSE Sound
System-
Indication
Turn Left Turn Right
*
equipped model
OFF
ON
Decrease
bass
Increase
bass
Decrease
treble
Increase
treble
Shift the
Shift the
sound to the sound to the
front
rear
*
Shift the
Shift the
sound to the sound to the
left
right
* Depending on the mode selected, the
indication changes.
OFF
ON
2. Turn the audio control dial to adjust the
selected functions as follows:
NOTE
Standard audio-equipped model
About 5 seconds after selecting any
mode, the volume function will be
automatically selected. To reset bass,
mid-range, treble, fade, and balance,
press the audio control dial for 2
seconds. The unit will beep and
“CLEAR” will be displayed.
Indication
Turn Left Turn Right
Select mode
Decrease
bass
Increase
bass
Decrease
Increase
mid-range mid-range
Decrease
treble
Increase
treble
Automatic Level Control (ALC)
(Standard audio-equipped model)
Shift the
sound to the sound to the
Shift the
front
rear
The automatic level control is a feature
that automatically adjusts audio volume
and sound quality according to the vehicle
speed.
The volume increases in accordance with
the increase in vehicle speed, and
decreases as vehicle speed decreases.
Shift the
sound to the sound to the
Shift the
left
right
OFF
ON
6-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page216
Thursday, August 25 2005 4:57 PM
Black plate (216,1)
Interior Comfort
Audio System
The following four modes are available.
Select the desired mode.
Mode
Volume change
No change
Minimum
Medium
Maximum
Turn the audio control dial to select the
ALC OFF, ALC LEVEL1―3 mode. The
selected mode will be indicated.
*AudioPilot (BOSE Sound System-
equipped model)
AudioPilot automatically adjusts audio
volume and sound quality in accordance
with the level of noise entering the vehicle
interior while driving. When AudioPilot is
turned ON, the system automatically
calculates the conditions for optimum
hearing of sound which may be difficult
to hear depending on exterior noise.
* AudioPilot is a registered trademark of
BOSE Corporation.
BEEP setting
The beep-sound when operating the audio
system can be set on or off.
6-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page217
Thursday, August 25 2005 4:57 PM
Black plate (217,1)
MEMO
6-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page218
Thursday, August 25 2005 4:57 PM
Black plate (218,1)
Interior Comfort
Audio System
qOperating the Radio
Satellite button*
Band selector button
Channel preset buttons
Seek tuning
button
Scan button
Manual tuning dial
Auto memory button
Electric serial number button*
*For reception of optional SIRIUS digital satellite radio.
Used on vehicles equipped with the separately sold SIRIUS digital satellite radio unit.
For information on use, read the manual accompanying the SIRIUS unit.
Subscription of SIRIUS digital satellite radio service is available in the U.S. (Except Alaska and Hawaii).
Radio ON
Tuning
Press a band selector button (
turn the radio on.
) to
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
Band selection
Successively pressing the band selector
button ( ) switches the bands as
follows: FM1→FM2→AM.
NOTE
The selected mode will be indicated. If
FM stereo is being received, “ST” will be
displayed.
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
NOTE
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
If the FM broadcast signal becomes
weak, reception automatically changes
from STEREO to MONO for reduced
noise, and the “ST” indicator will go
out.
6-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page219
Thursday, August 25 2005 4:57 PM
Black plate (219,1)
Interior Comfort
Audio System
Seek tuning
Auto memory tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
,
)
This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
previously set channels.
NOTE
If you continue to press and hold the
button, the frequency will continue
changing without stopping.
Press and hold the auto memory button
(
) for about 2 seconds until a beep
sound is heard; the system will
automatically scan and temporarily store
up to 6 stations with the strongest
frequencies in each selected band in that
area.
Scan tuning
Press the scan button (
,
) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
button (
,
) again during this interval.
Press and release the auto memory button
Preset channel tuning
(
) to recall stations from the auto-
The 6 preset channels can be used to store
6 AM and 12 FM stations.
stored stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
NOTE
2. Depress a channel preset button for
about 2 seconds until a beep sound is
heard. The preset channel number and
station frequency will be displayed.
The station is now held in the memory.
If no stations can be tuned after
scanning operations, “A” will be
displayed.
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTE
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
6-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page220
Thursday, August 25 2005 4:57 PM
Black plate (220,1)
Interior Comfort
Audio System
qOperating the Cassette Tape Playerí
Cassette tape play button
Fast-forward button
APC button:
(next program)
(one being
played)
Rewind
button
Repeat button
Dolby NR button
Cassette tape eject button
Program button
Illustration is of a representative audio unit.
Cassette tape insert
Dolby noise reduction
Insert the cassette tape into the slot, open
edge to the right and cassette tape will
begin play, and “TAPE PLAY” will be
displayed. At the end of the cassette tape,
the unit automatically reverses cassette
When using a tape with Dolby NR*, push
the Dolby NR button ( ). The
symbol will be displayed. To play a tape
without Dolby NR, push the button once
again.
tape play. When
is lit, the cassette
tape's top side is playing. When
the bottom side is on.
is lit,
* Noise reduction system manufactured
under license from Dolby Laboratories
Licensing Corporation.
Dolby and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
Playing
Press the cassette tape play button
(
) to start play when a cassette
tape is in the unit. If there isn't a cassette
tape in the unit when the cassette tape
Ejecting the cassette tape
play button (
“NO TAPE” will flash on and off.
) is pressed,
Press the cassette tape eject button ( ) to
eject the cassette tape.
6-24
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page221
Thursday, August 25 2005 4:57 PM
Black plate (221,1)
Interior Comfort
Audio System
NOTE
NOTE
The cassette tape can be ejected when
the ignition switch is in the OFF
position.
APC may not operate properly if:
l
A tape was recorded at a low level.
l
A tape has long, silent intervals.
l
Fast-forward/Rewind
A tape is a live recording.
Press the fast-forward button (
fast-forward.
) to
l
A tape has very short intervals of
less than 3 seconds.
Press the rewind button (
) to rewind.
To stop this operation and play the
cassette tape, press the button again.
Repeat play
This operation makes it possible to listen
to a selection repeatedly.
NOTE
Press the repeat button (
The current selection playing will be
repeated (“RPT” will be displayed).
Press the repeat button (
to cancel repeat play.
) during play.
When the cassette tape ends during fast-
forward or rewind, it automatically
stops and starts playing.
) once again
Reversing
Press the program button (
change cassette tape-play direction.
) to
NOTE
RPT may not operate properly if:
NOTE
l
A tape was recorded at a low level.
l
When the cassette tape ends, the unit
automatically reverses play.
A tape has long, silent intervals.
l
A tape is a live recording.
l
A tape has very short intervals of
less than 3 seconds.
Automatic program control (APC)
APC is used to find the beginning of
either the next program or the one being
played.
Press the APC button ( ) to the
beginning of the next selection.
Press the APC button ( ) to the
beginning of the one being played. To
stop this operation and play the cassette
tape, press the button again.
6-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page222
Thursday, August 25 2005 4:58 PM
Black plate (222,1)
Interior Comfort
Audio System
qOperating the Mini Disc (MD) Playerí
MD play button
Display button
Track up
button
Scan button
Fast-forward
button
Track down
button
Display feed
dial
MD eject button
MD slot
Reverse button
Repeat button
Random button
Illustration is of a representative audio unit.
Inserting the MD
Fast-forward/Reverse
Insert the MD, label-side up with the
arrow pointed to the slot. The auto-
loading mechanism will set the MD and
begin play. There will be a short lapse
before play begins while the player reads
the digital signals on the MD.
Press and hold the fast-forward button
(
) to advance through a track at high
speed.
Press and hold the reverse button (
to reverse through a track at high speed.
)
Track search
Playing
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the MD play button (
start play when a MD is in the unit.
) to
If there isn't a MD in the unit when the
MD play button ( ) is pressed,
“NO DISC” will flash on and off.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Ejecting the MD
Music scan
Press the MD eject button ( ) to eject the
MD.
This feature helps to find a program by
playing about the first 10 seconds of each
track.
6-26
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page223
Thursday, August 25 2005 4:58 PM
Black plate (223,1)
Interior Comfort
Audio System
Press the scan button (
play to start scan play operation (the track
number will flash).
,
) during
NOTE
If there is no song or disc title recorded
on the MD, “NO TITLE” will be
displayed.
Press the scan button (
to cancel scan play.
,
) once again
NOTE
Long disc or song titles
When long disc or song titles cannot be
completely displayed, rotate the display
If the unit is left in scan, normal play
will resume where scan was selected.
feed dial (
) to the right.
The remainder of the title will proceed
and appear on the display to the end of the
title.
Repeat play
This feature makes it possible to listen to
a selection repeatedly.
Press the repeat button (
) during play.
The current selection will be repeated
(“RPT” will be displayed).
Press the repeat button (
to cancel repeat play.
) once again
Random play
This feature allows the MD player to
randomly select the order of the songs.
Press the random button (
) during
play. The next selection will be randomly
selected (“RDM” will be displayed).
Press the random button (
) once
again to cancel random play.
Changing the display
To change the display during MD play,
press the display button ( ) to advance
through each of the following displays:
Track number/
Elapsed play
back time
Song title
Disc title
6-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page224
Thursday, August 25 2005 4:58 PM
Black plate (224,1)
Interior Comfort
Audio System
qOperating the Compact Disc (CD) Playerí
Load button
CD play button
CD eject button
CD slot
Display button
Track up
button
Scan button
Fast-forward
button
Track down
button
Repeat button
Reverse button
Random button
Illustration is of a representative audio unit.
Inserting the CD
Ejecting the CD
Insert the CD into the slot, label-side up.
The auto-loading mechanism will set the
CD and begin play. There will be a short
lapse before play begins while the player
reads the digital signals on the CD.
Press the CD eject button ( ) to eject the
CD.
Fast-forward/Reverse
Press and hold the fast-forward button
(
) to advance through a track at high
Playing
speed.
Press the CD play button ( ) to start
play when a CD is in the unit.
Press and hold the reverse button (
to reverse through a track at high speed.
)
If there isn't a CD in the unit when the CD
play button ( ) is pressed, “NO DISC”
will flash on and off.
Track search
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
NOTE
When the load button (
) is pressed,
the CD will load and play even if the
CD eject button ( ) had been
previously pressed.
6-28
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page225
Thursday, August 25 2005 4:58 PM
Black plate (225,1)
Interior Comfort
Audio System
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.
Press the scan button (
,
) during
play to start scan play operation (the track
number will flash).
Press the scan button (
to cancel scan play.
,
) once again
NOTE
If the unit is left in scan, normal play
will resume where scan was selected.
Repeat play
This feature makes it possible to listen to
a selection repeatedly.
Press the repeat button (
) during play.
The current selection will be repeated
(“RPT” will be displayed).
Press the repeat button (
to cancel repeat play.
) once again
Random play
This feature allows the CD player to
randomly select the order of the songs.
Press the random button (
) during
play. The next selection will be randomly
selected (“RDM” will be displayed).
Press the random button (
) once
again to cancel random play.
6-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page226
Thursday, August 25 2005 4:58 PM
Black plate (226,1)
Interior Comfort
Audio System
qOperating the In-Dash CD Changerí
Load button
Channel preset buttons
Display button
CD eject button
CD slot CD play button
Track up
button
Scan button
Fast-forward
button
Track down
button
Disc down button
Repeat button
Disc up button
Reverse button
Random button
Illustration is of a representative audio unit.
Inserting the CD
Normal insertion
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play. There will
be a short lapse before play begins while
the player reads the digital signals on the
CD.
1. Press the load button (
).
2. When “IN” is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button (
)
for about 2 seconds until a beep sound
is heard.
The disc number and the track number
will be displayed.
2. Press the channel preset button for the
desired tray number within 3 seconds
after the beep sound is heard.
NOTE
A CD cannot be inserted while the
display reads “WAIT”. A beeping
sound can be heard during this waiting
time. Simultaneously pressing the
power/volume dial and the load button
3. When “IN” is displayed, insert the CD.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
(
) for about 2 seconds will turn
this beeping sound ON or OFF.
6-30
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page227
Thursday, August 25 2005 4:58 PM
Black plate (227,1)
Interior Comfort
Audio System
Multiple insertion
Ejecting CDs from desired tray number
1. Press and hold the load button (
)
1. Press and hold the CD eject button (
for about 2 seconds until a beep sound
is heard.
)
for about 2 seconds until a beep sound
is heard.
2. Wait 3 seconds or press the load button
2. Press the channel preset button for the
desired CD number within 3 seconds
after the beep sound is heard.
(
) again within 3 seconds after the
beep sound is heard.
3. When “IN” is displayed, insert the CD.
3. Pull out the CD.
4. When “IN” is displayed again, insert
Multiple ejection
the next CD.
1. Press and hold the CD eject button (
for about 2 seconds until a beep sound
is heard.
)
NOTE
The first-inserted CD will be played
automatically when:
2. Wait 3 seconds or press the CD eject
button ( ) again within 3 seconds
after the beep sound is heard.
l
No other CD is inserted within 15
seconds after “IN” is displayed.
3. Pull out the CD, then the next CD will
be ejected.
l
The CD trays are full.
NOTE
Displaying the CD-inserted tray
number
l
CDs will be ejected starting with the
When you want to know the number for a
CD-inserted tray, press the display button
one with the lowest number.
l
All CDs in the tray will be ejected
continuously.
(
). The tray number will be displayed
for 5 seconds.
l
CDs can be ejected when the ignition
Ejecting the CD
Normal ejection
switch is off. Press and hold the CD
eject button ( ) for about 2 seconds
and all CDs will eject.
1. Press the CD eject button ( ). The
disc number and “DISC” “OUT” will
be displayed.
Playing
Press the CD play button ( ) to start
play when a CD is in the unit.
2. Pull out the CD.
If there isn't a CD in the unit when the CD
play button ( ) is pressed, “NO DISC”
will flash on and off.
NOTE
When the CD is ejected during play, the
next CD will be played automatically.
6-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page228
Thursday, August 25 2005 4:58 PM
Black plate (228,1)
Interior Comfort
Audio System
Fast-forward/Reverse
Press the repeat button (
) during play.
The current selection will be repeated
(“RPT” will be displayed).
Press and hold the fast-forward button
(
) to advance through a track at high
Press the repeat button (
to cancel repeat play.
) once again
speed.
Press and hold the reverse button (
)
to reverse through a track at high speed.
Random play
Track search
This feature allows the CD player to
randomly select the order of the songs.
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Press the random button (
) during
play. The next selection will be randomly
selected (“RDM” will be displayed).
Press the random button (
) once
again to cancel random play.
Disc search
Press the disc up button (
forward to the beginning of the next CD.
Press the disc down button ( ) to
) to skip
skip back to the beginning of the previous
CD.
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.
Press the scan button (
,
) during
play to start scan play operation (the track
number will flash).
Press the scan button (
to cancel scan play.
,
) once again
NOTE
If the unit is left in scan, normal play
will resume where scan was selected.
Repeat play
This feature makes it possible to listen to
a selection repeatedly.
6-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page229
Thursday, August 25 2005 4:58 PM
Black plate (229,1)
Interior Comfort
Audio System
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
Cause
Solution
Insert the MD properly. If the error indication does not
disappear, consult an Authorized Mazda Dealer.
MD is inserted upside down
CHECK MD
Insert another MD properly. If the error indication does not
disappear, consult an Authorized Mazda Dealer.
MD is defective
Insert the CD properly. If the error indication does not disappear,
consult an Authorized Mazda Dealer.
CD is inserted upside down
CD is defective
CHECK CD
Insert another CD properly. If the error indication does not
disappear, consult an Authorized Mazda Dealer.
6-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page230
Thursday, August 25 2005 4:58 PM
Black plate (230,1)
Interior Comfort
Audio System
NOTE
Audio Control Switch
Operation
Mazda has installed this system to
prevent distraction while driving the
vehicle and using audio controls on the
dashboard.
Always make safe driving your first
priority.
When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.
NOTE
qAdjusting the Volume
Because the audio unit will be turned
off under the following conditions, the
switches will be inoperable.
To increase the volume, press the volume
button ( ).
l
When the ignition switch is turned to
the LOCK position.
To decrease the volume, press the volume
button ( ).
l
When the power button on the audio
unit is pressed and the audio unit is
turned off.
l
When a cassette tape/MD/CD being
played is ejected. (For the In-dash
CD changer, when all CDs are
ejected.)
6-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page231
Thursday, August 25 2005 4:58 PM
Black plate (231,1)
Interior Comfort
Audio System
qChanging the Source
qSeek Switch
Press the mode switch (
) to change
the audio source (FM1 radio> FM2 radio>
AM radio> CD player or CD changer>
SIRIUS1> SIRIUS2> SIRIUS3> Cassette
tape player or MD player> cyclical).
When listening to the radio
Press the seek switch (
,
), the radio
switches to the next/previous stored
station in the order that it was stored
(1―6).
NOTE
Press the seek switch (
,
) for about 2
seconds until a beep sound is heard to
seek all usable stations at a higher or
lower frequency whether programmed or
not.
Cassette tape, MD, CD, CD changer,
and SIRIUS digital satellite radio
modes cannot be selected in the
following cases:
When playing a cassette tape
l
A cassette deck, MD, CD, CD
Press the seek switch ( ), release, and it
will advance to the next selection.
Press the seek switch ( ), release, and it
will repeat the selection being played.
changer, or SIRIUS digital satellite
radio unit is not equipped on the
audio system.
l
A cassette tape, MD, or CD has not
When playing a CD or MD
been inserted.
Press the seek switch ( ) to skip to the
next track.
Press the seek switch ( ) to repeat the
current track.
6-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page232
Thursday, August 25 2005 4:58 PM
Black plate (232,1)
Interior Comfort
Audio System
qMute Switch
Press the mute switch ( ) once to mute
audio, press it again to resume audio
output.
6-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page233
Thursday, August 25 2005 4:58 PM
Black plate (233,1)
Interior Comfort
Audio System
Safety Certification
This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.
CAUTION
l
This CD player should not be adjusted or repaired by anyone except qualified service
personnel.
If servicing is required, contact an Authorized Mazda Dealer.
l
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD player
with the top case of the unit removed.
l
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
NOTE
For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
6-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page234
Thursday, August 25 2005 4:58 PM
Black plate (234,1)
Interior Comfort
Interior Equipment
Sunvisors
Interior Lights
When you need a sunvisor, lower it for
use in front or swing it to the side.
qIlluminated Entry System
When the illuminated entry system
operates, the overhead light (switch is in
the DOOR position) and the courtesy
lights turn on for:
Sunvisor
l
About 30 seconds after the driver's
door is unlocked and the ignition key is
removed.
l
About 15 seconds after all doors are
closed (If your vehicle is equipped with
the advanced key, the overhead light
turns on for about 5 seconds when the
advanced key is outside of the vehicle).
qVanity Mirrors
l
About 15 seconds after the key is
removed from the ignition with all
doors closed.
To use the vanity mirror, lower the
sunvisor.
The vanity mirror light will illuminate
when you open the cover.
The light also turns off when:
l
The ignition switch is turned to the ON
position and all doors are closed.
l
The driver's door is locked.
NOTE
Battery saver
If any door is left opened, the light goes
out after about 30 minutes to save the
battery.
The light turns on again when the
ignition switch is turned to the ON
position, or when any door is opened
after all doors have been closed.
6-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page235
Thursday, August 25 2005 4:58 PM
Black plate (235,1)
Interior Comfort
Interior Equipment
Rear
qOverhead Lights
Front
With moonroof
Switch
Position
Rear Overhead Lights
Light off
l
Light on when any door is open
Without moonroof
l
Light on or off when the
illuminated entry system is on
Light on
qMap Lights
The map lights are switched on or off by
pressing the switches.
With moonroof
Switch
Position
Front Overhead Lights
Light off
l
Light on when any door is open
l
Light on or off when the
illuminated entry system is on
6-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page236
Thursday, August 25 2005 4:58 PM
Black plate (236,1)
Interior Comfort
Interior Equipment
Without moonroof
qCourtesy Lights
Turns on when any door is open or the
illuminated entry system is on.
Courtesy Light
6-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page237
Thursday, August 25 2005 4:58 PM
Black plate (237,1)
Interior Comfort
Interior Equipment
Information Display
qInformation Display Functions
The information display has the following functions:
l
Clock
l
Ambient Temperature Display (Outside Temperature Display)
Climate Control Display
l
l
Audio Display
6-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page238
Thursday, August 25 2005 4:58 PM
Black plate (238,1)
Interior Comfort
Interior Equipment
12:01―12:29→12:00
12:30―12:59→1:00
qClock
When the ignition switch is in the ACC or
ON position, the time is displayed.
NOTE
When the SET button is released, the
seconds are reset to “00”.
qAmbient Temperature Display
When the ignition switch is in the ON
position, press the AMB button to display
the ambient temperature.
Time setting
1. Press the CLK button until a beep
sounds, and “12Hr” and “24Hr” will be
displayed.
2. Press the SET button to switch between
“12Hr” and “24Hr” displays. The
selected display will flash.
To select the desired clock setting,
press the CLK button again while the
preferred setting is flashing.
NOTE
3. “Hr. ADJUST” will be displayed next,
and the hour portion of the display will
flash. Press the SET button to set the
hour, then press the CLK button.
l
The displayed ambient temperature
may vary from the actual ambient
temperature depending on the
surrounding area and vehicle
conditions.
4. “Min. ADJUST” will be displayed
next, and the minutes portion of the
display will flash. Press the SET button
to set the minutes, then press the CLK
button.
l
Press the AMB button 2 seconds or
more to switch the display from
Fahrenheit to Centigrade or vice
versa.
Time resetting
While the clock is displayed, press the
SET button 1.5 seconds or more. When
the button is released, a beep will sound
and the clock will be reset as follows:
(Example)
6-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page239
Thursday, August 25 2005 4:58 PM
Black plate (239,1)
Interior Comfort
Interior Equipment
qClimate Control Display
Lighter
The climate control system status is
displayed. To operate the climate control
system, refer to “Climate Control System”
(page 6-2).
The ignition switch must be in the ACC
or ON position.
1. Open the cover.
qAudio Display
The audio system status is displayed. To
operate the audio system, refer to
2. Press the lighter in and release it. When
ready for use, it automatically pops out.
6-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page240
Thursday, August 25 2005 4:58 PM
Black plate (240,1)
Interior Comfort
Interior Equipment
Ashtray
CAUTION
l
Don't touch the metal part of the
CAUTION
lighter, you may burn yourself.
Don't use the ashtray for trash. You
might start a fire.
l
Don't hold the lighter in because it
will overheat.
l
Don't use the lighter socket for plug-
To use, open the cover.
in accessories such as shavers and
coffee pots. They may damage it or
cause electrical failure. Use only a
genuine Mazda lighter or the
equivalent.
l
If the lighter doesn't pop out within
30 seconds, remove it to prevent
overheating.
To remove, open the cover and pull up the
ashtray.
6-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page241
Thursday, August 25 2005 4:58 PM
Black plate (241,1)
Interior Comfort
Interior Equipment
qFront
Cup Holder
To use, slide the lid while pushing the
button until you hear a click sound.
WARNING
Using Cup Holder:
Using a cup holder to hold hot liquids
while the vehicle is moving is
dangerous. If the contents spill, you
could be scalded. Never use a cup
holder to hold hot liquids while the
vehicle is moving.
Don't Put Anything Other Than Cups
or Drink cans in Cup Holder:
Putting objects other than cups or
drink cans in a cup holder is
dangerous.
CAUTION
During sudden braking or
Do not use a cup holder with the lid
unlocked. During sudden braking or
maneuvering, the lid could slide
forward causing the cup contents to
spill.
maneuvering, occupants could be hit
and injured, or objects could be
thrown around the vehicle, causing
interference with the driver and the
possibility of an accident. Only use a
cup holder for cups or drink cans.
qRear
To use, pull the lid up.
CAUTION
To reduce the possibility of injury in an
accident or a sudden stop, keep cup
holders closed when not in use.
6-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page242
Thursday, August 25 2005 4:58 PM
Black plate (242,1)
Interior Comfort
Interior Equipment
qCoin Box
Storage Compartments
To open, press the release catch down and
pull the lid downward.
WARNING
Open Storage Boxes:
Driving with the storage boxes open is
dangerous. To reduce the possibility of
injury in an accident or a sudden stop,
keep the storage boxes closed when
driving.
CAUTION
Don't leave lighters or eyeglasses in the
storage boxes while parked under the
sun. A lighter could explode or the
plastic material in eyeglasses could
deform and crack from high
qGlove Box
To open the glove box, pull the latch
toward you.
Insert the key (auxiliary key*) and turn it
clockwise to lock, counterclockwise to
unlock.
temperature.
qOverhead Console
* Advanced key equipped vehicle
This console box is designed to store
accessories. Push and release to open.
Unlock
Lock
6-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page243
Thursday, August 25 2005 4:58 PM
Black plate (243,1)
Interior Comfort
Interior Equipment
Rear
qCenter Console
To open, pull the release catch.
Front
1. Slide the lid while pushing the button
until you hear a click sound.
CAUTION
2. Open the lid.
Do not place bottles filled with fluid
(e.g. cosmetic fragrance) in the console
box. If the fluid leaks, it could damage
the navigation system or the electrical
wiring, or both.
qStorage Box
The storage box is designed to store
accessories.
6-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page244
Thursday, August 25 2005 4:58 PM
Black plate (244,1)
Interior Comfort
Interior Equipment
To open, squeeze the latch and pull the lid
down.
Loading long objects with storage box
removed
When closing the storage box, put the
storage box back in its original position
until you hear a click sound.
The storage box can be removed for
convenient loading of long objects such as
skis placed through the trunk.
NOTE
WARNING
When using the storage box to store
heavy accessories, remove the storage
box before placing or removing the
accessories.
Loading Long Objects Through
Removed Storage Box Area:
Sudden braking or maneuvering while
long objects are loaded through the
removed storage box area and into the
trunk is dangerous. Operation of the
shift/selector lever could be obstructed
resulting in a serious accident. Secure
long objects in the trunk so that they
cannot be thrown forward in the cabin
and avoid sudden braking or
Insert the key (auxiliary key*) and turn it
clockwise to lock, counterclockwise to
unlock.
* Advanced key equipped vehicle
Unlock
maneuvering.
Lock
6-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page245
Thursday, August 25 2005 4:58 PM
Black plate (245,1)
Interior Comfort
Interior Equipment
NOTE
Accessory Socket
To prevent discharging the battery, don't
use the socket for long periods with the
engine off or idling.
The ignition switch must be in the ACC
or ON position.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
The accessory socket is in the center
console.
CAUTION
To prevent accessory socket damage or
electrical failure, pay attention to the
following:
l
Don't use accessories that require
more than 120 W (DC 12 V, 10 A).
l
Don't use accessories that are not
genuine Mazda accessories or the
equivalent.
l
Close the cover when the accessory
socket is not in use.
l
Correctly insert the plug into the
accessory socket.
6-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page246
Thursday, August 25 2005 4:58 PM
Black plate (246,1)
6-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page247
Thursday, August 25 2005 4:58 PM
Black plate (247,1)
In Case of an Emergency
7
Helpful information on what to do in an emergency.
Flat Tire ......................................................................................... 7-3
Kit ............................................................................................. 7-5
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page248
Thursday, August 25 2005 4:58 PM
Black plate (248,1)
In Case of an Emergency
Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all
four turn signals will flash.
NOTE
l
The turn signals don't work when the
hazard warning lights are on.
l
Check local regulations about the use
of hazard warning lights while the
vehicle is being towed. They may
forbid it.
7-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page249
Thursday, August 25 2005 4:58 PM
Black plate (249,1)
In Case of an Emergency
Flat Tire
Spare Tire and Tool Storage
Tools are stored in the locations illustrated in the diagram.
Instant Mobility System (IMS) Emergency Flat Tire Repair Kit
Tool box
Lug wrench
Jack handle
Tiedown eyelet
Jack
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page250
Thursday, August 25 2005 4:58 PM
Black plate (250,1)
In Case of an Emergency
Flat Tire
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spares should
NEVER be used for long drives or
extended periods.
qJack
To remove the jack
1. Open the tool box.
WARNING
Driving with a Temporary Spare Tire
on Ice or Snow:
Driving with a spare tire on the rear
(driving) wheels on ice or snow is
dangerous. Handling will be affected.
You could lose control of the vehicle
and have an accident. Put the spare
tire on the front axle and move a
regular tire to the rear.
2. Turn the jack screw counterclockwise.
CAUTION
l
When using the temporary spare tire,
driving stability may decrease
compared to when using only the
conventional tire.
Drive carefully.
To secure the jack
Perform the removal procedure in reverse.
qSpare Tire
A temporary spare tire is not equipped
with your Mazda. If an emergency tire
repair is needed, repair the flat tire with
the emergency flat tire repair kit (page
7-5). If you require a temporary spare tire,
consult an Authorized Mazda Dealer.
When installing a temporary spare tire,
follow the manufacturer's instructions for
the temporary spare tire.
7-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page251
Thursday, August 25 2005 4:58 PM
Black plate (251,1)
In Case of an Emergency
Flat Tire
Instant Mobility System
(IMS) Emergency Flat
Tire Repair Kit
CAUTION
l
To avoid damage to the temporary
spare or to the vehicle, observe the
following precautions:
The IMS emergency flat tire repair kit
included with your Mazda is for a
temporary repair of a slightly damaged
flat tire resulting from running over nails
or similar sharp objects on the road
surface.
l
Don't exceed 80 km/h (50 mph).
Avoid driving over obstacles.
l
Also, don't drive through an
automatic car wash. This tire's
diameter is smaller than a
conventional tire's, so the ground
clearance is reduced about 25 mm
(1 in).
Don't use a tire chain on this tire
because it won't fit properly.
Don't use your temporary spare
on any other vehicle; it has been
designed only for your Mazda.
NOTE
l
Your vehicle is not equipped with a
spare tire. In the event of a flat tire, use
the emergency flat tire repair kit to
repair the tire temporarily. When doing
the repair, refer to the instructions
included in the emergency flat tire
repair kit. After temporarily repairing a
tire with the emergency flat tire repair
kit, take your vehicle to an Authorized
Mazda Dealer to have the tire replaced.
l
l
Use only one temporary spare tire
on your vehicle at the same time.
(With limited slip differential)
When using the temporary spare tire on
the rear axle, replace it with a standard
tire as soon as possible. The size
difference between the spare and the
standard tire will cause the limited slip
differential to malfunction.
NOTE
(With Tire Pressure Monitoring
System)
A tire pressure sensor is not installed to
the temporary spare tire. The warning
light will flash continuously while the
temporary spare tire is being used (page
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page252
Thursday, August 25 2005 4:58 PM
Black plate (252,1)
In Case of an Emergency
Flat Tire
qAbout the IMS Emergency Flat
WARNING
Tire Repair Kit
The IMS emergency flat tire repair kit
includes the following items.
Ingestion of Tire Sealant:
Ingestion of tire sealant is dangerous.
In the event tire sealant is accidentally
swallowed, drink large amounts of
water immediately and seek medical
assistance. Do not allow children to
touch the tire sealant.
Compressor
Tire sealant
Tire Sealant Contacting Eyes and
Skin:
Injection hose
Tire sealant that comes into contact
with the eyes and skin is dangerous. If
tire sealant enters the eyes or contacts
the skin, flush immediately with large
amounts of water and seek medical
assistance. Do not allow children to
touch the tire sealant.
Repaired tire
sticker
Spare valve
core
Valve core
tool
Instruction
Speed restriction
sticker
Case
7-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page253
Thursday, August 25 2005 4:58 PM
Black plate (253,1)
In Case of an Emergency
Flat Tire
4. Unload passengers and luggage, and
remove the emergency flat tire repair
kit.
NOTE
l
The tire sealant cannot be reused.
Purchase new tire sealant at an
Authorized Mazda Dealer.
l
The emergency flat tire repair kit
cannot be used in the following
cases.
Consult an Authorized Mazda
Dealer.
l
The period of effective use for the
tire sealant has expired. (The
period of effectiveness is
indicated on the bottle label.)
The tear or puncture exceeds
l
5. Shake the tire sealant well.
about 4 mm (0.16 in).
l
The damage has occurred to an
area of the tire other than the
tread.
The vehicle has been driven with
l
nearly no air remaining in the tire.
The tire has come off the wheel
l
rim.
l
Damage to the wheel rim has
occurred.
The tire has two or more
l
punctures.
qUsing the IMS Emergency Flat
CAUTION
Tire Repair Kit
If the bottle is shaken after the injection
hose is screwed on, tire sealant could
spray out from the injection hose. Tire
sealant contacting clothing or other
objects may be impossible to remove.
Shake the bottle before screwing on the
injection hose.
1. Park on a level surface off the right-of-
way and set the parking brake.
2. Put a vehicle with an automatic
transmission in Park (P), a manual
transmission in Reverse (R) or 1, and
turn off the engine.
3. Turn on the hazard warning flasher.
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page254
Thursday, August 25 2005 4:58 PM
Black plate (254,1)
In Case of an Emergency
Flat Tire
NOTE
CAUTION
The tire sealant can be used at outside
temperatures down to 30°C.
If there is air remaining in the tire when
the valve core is removed, the valve
core could fly out. Remove the valve
core carefully.
_
In extremely cold temperatures (0°C
(32°F) or below), the tire sealant
hardens easily and injection of the
sealant will be difficult. Warm the
sealant inside the vehicle before doing
the injection work.
8. Turn the valve core counterclockwise
with the valve core tool and remove the
valve core.
6. Remove the cap from the bottle. Screw
on the injection hose with the bottle's
inner cap left on to break the inner cap.
Valve
Valve core
Injection hose
Bottle
NOTE
Store the valve core in a place where it
won't get dirty.
7. Remove the valve cap from the flat
tire. Press the back of a valve core tool
to the core of the tire valve and bleed
all the remaining air.
9. Remove the plug from the injection
hose and insert the injection hose into
the valve.
Valve
Plug
Valve cap
Injection hose
Valve core tool
7-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page255
Thursday, August 25 2005 4:58 PM
Black plate (255,1)
In Case of an Emergency
Flat Tire
10. Hold the bottom of the bottle upright,
squeeze the bottle with your hands,
and inject the entire amount of tire
sealant into the tire.
NOTE
Do not throw away the empty tire
sealant bottle after use. Return the
empty tire sealant bottle to an
Authorized Mazda Dealer when
replacing the tire. The empty tire sealant
bottle will need to be used to extract
and dispose of the used sealant from the
tire.
13. Attach the vehicle speed restriction
sticker in a place where the driver can
easily see it.
Valve
NOTE
The tire sealant cannot be reused.
Purchase a new tire sealant kit at an
Authorized Mazda Dealer.
11. Pull out the injection hose from the
valve. Reinsert the valve core into the
valve and turn it clockwise to install
it.
12. Attach the sticker that indicates
completion of the tire repair on a flat
outer surface of the repaired tire.
WARNING
Attaching Sticker to the Steering
Wheel Pad:
Attaching the vehicle speed restriction
sticker to the steering wheel pad is
dangerous. The sticker could interfere
with air bag inflation and cause
serious injury. Also, do not attach the
sticker to the meter panel, as it would
obstruct vision of areas such as
warning light indicators or the
speedometer.
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page256
Thursday, August 25 2005 4:58 PM
Black plate (256,1)
In Case of an Emergency
Flat Tire
14. Install the compressor hose to the tire
valve.
16. Turn the compressor switch on and
inflate the tire carefully to the correct
inflation pressure.
WARNING
Valve
Compressor hose
Operating the Compressor:
Operating the compressor above 300
kPa (3.1 kgf/cm2, 3 bar, 43.5 psi) is
dangerous. When the inflation
pressure rises above 300 kPa (3.1
kgf/cm2, 3 bar, 43.5 psi), heated air
will be exhausted from the back of the
compressor and you could be burned.
Never operate the compressor above
300 kPa (3.1 kgf/cm2, 3 bar, 43.5 psi).
15. Insert the compressor plug into the
interior accessory socket and turn the
ignition switch to the ACC position
(page 6-49).
CAUTION
Compressor
plug
If the compressor operates slowly or
becomes hot, it indicates overheating.
Turn the compressor off immediately
and leave it turned off for 30 minutes or
longer.
Compressor
Center console
CAUTION
l
Before pulling out the compressor
plug from the electrical socket, make
sure the compressor power switch is
off.
l
The compressor turns on and off
with the push-button switch.
7-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page257
Thursday, August 25 2005 4:58 PM
Black plate (257,1)
In Case of an Emergency
Flat Tire
NOTE
NOTE
l
Check the tire inflation pressure label
(rear door on the driver's side) for the
correct tire inflation pressure.
(With Tire Pressure Monitoring
System)
If the tire is not properly inflated, the
tire pressure monitoring system warning
light will illuminate (page 5-27).
l
l
Do not use the compressor for longer
than 10 minutes because using the
compressor for long periods could
damage it.
20. After driving the vehicle for 10
minutes or 5 km (3 miles), check the
tire pressure with the tire pressure
gauge equipped with the compressor.
If the tire pressure has fallen below
the correct tire pressure, inflate the
tire to the correct pressure again
following the steps from number 15.
If the tire does not inflate, repair of
the tire may not be possible. If the
tire does not reach the correct
inflation pressure within a 10-minute
period, it probably has received more
extensive damage. When this
happens, the emergency flat tire
repair kit cannot be used to repair the
tire. Contact an Authorized Mazda
Dealer.
CAUTION
l
If the tire inflation pressure falls
l
below 130 kPa (1.3 kgf/cm2 or bar,
18.9 psi), repair cannot be done with
the repair kit. Park the vehicle on a
level surface off the right-of-way and
contact an Authorized Mazda Dealer.
If the tire has been over-inflated,
loosen the screw cap on the
compressor and bleed some of the air
out.
17. When the tire has been inflated to the
proper inflation pressure, turn the
l
If the tire inflation pressure
continues to remain low after
repeating steps 14 to 21, park the
vehicle on a level surface off the
right-of-way and contact an
Authorized Mazda Dealer.
compressor switch off and remove the
compressor hose from the tire valve.
18. Install the tire valve cap.
19. Put the emergency flat tire repair kit
in the trunk and continue driving.
NOTE
CAUTION
When checking the tire inflation
pressure with the tire pressure gauge on
the compressor unit, make sure the
compressor switch is turned off.
l
Drive carefully to an Authorized
Mazda Dealer and keep the vehicle
speed below 80 km/h (50 mph).
l
If the vehicle is driven 80 km/h (50
mph) or higher, the vehicle might
begin to vibrate.
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page258
Thursday, August 25 2005 4:58 PM
Black plate (258,1)
In Case of an Emergency
Flat Tire
21. If the tire inflation pressure remains
stable, the tire repair is complete.
Drive the vehicle with care to an
Authorized Mazda Dealer to have the
tire replaced.
Changing the Tire
WARNING
Jacking a Vehicle:
Changing a tire is dangerous if not
done properly. The vehicle can slip off
the jack and seriously injure someone.
Be sure to follow the directions for
changing a tire, and never get under a
vehicle that is supported only by a
jack.
CAUTION
l
A tire that has been temporarily
repaired with the tire sealant cannot
be reused. Mazda recommends
replacing the tire with a new one.
l
The wheel can be reused after any
sealant adhering to it is wiped off
and carefully inspected. However,
replace the tire valve with a new one.
Passenger in Vehicle Supported by a
Jack:
Allowing someone to remain in a
vehicle supported by a jack is
dangerous. The occupant could cause
the vehicle to fall resulting in serious
injury. Never allow anyone inside a
vehicle supported by a jack.
qInspecting the IMS Emergency
Flat Tire Repair Kit
Inspect the emergency tire repair kit at
regular intervals.
l
Check the tire sealant period of
CAUTION
effective use.
l
Check the operation of the tire
compressor.
(With Tire Pressure Monitoring
System)
The wheels equipped on your Mazda
are specially designed for installation of
the tire pressure sensors. Do not use
non-genuine wheels, otherwise it may
not be possible to install the tire
pressure sensors.
NOTE
The tire sealant has a period of effective
use. Check the period of effective use
indicated on the bottle label and do not
use it if it has expired. Have the tire
sealant replaced at an Authorized
Mazda Dealer before the period of
effective use has expired.
7-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page259
Thursday, August 25 2005 4:59 PM
Black plate (259,1)
In Case of an Emergency
Flat Tire
NOTE
NOTE
l
Make sure the jack is well lubricated
before using it.
When blocking a tire, use rocks or
wood blocks of sufficient size to hold
the tire in place.
(With Tire Pressure Monitoring
System)
qRemoving the Tire
l
Be sure to register the tire pressure
sensor ID signal code whenever tires
or wheels are changed (page 5-30).
1. Loosen the lug nuts by turning them
counterclockwise one turn each, but
don't remove any until the tire has been
raised off the ground.
1. Park on a level surface off the right-of-
way and firmly set the parking brake.
2. Put a vehicle with an automatic
transmission in Park (P), a manual
transmission in Reverse (R) or 1, and
turn off the engine.
3. Turn on the hazard warning flasher.
4. Have everyone get out of the vehicle
and away from the vehicle and traffic.
5. Remove the jack, and tool (page 7-3).
6. Block the wheel diagonally opposite
the tire to be changed. When blocking
a wheel, place a tire block both in front
and behind the tire.
2. Place the jack under the jacking
position closest to the tire being
changed.
Jacking position
7-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page260
Thursday, August 25 2005 4:59 PM
Black plate (260,1)
In Case of an Emergency
Flat Tire
4. Turn the jack handle clockwise and
raise the vehicle high enough so that
the tire can be installed. Before
removing the lug nuts, make sure your
Mazda is firmly in position and that it
cannot slip or move.
WARNING
Incorrect Jacking Position:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone. Use only the front and
rear jacking positions recommended
in this manual.
Improper Jack:
Using a jack that isn't designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone. Use only the jack
provided with your Mazda.
5. Remove the lug nuts by turning them
counterclockwise, then remove the
wheel.
Placing Objects Under the Jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle. Never place objects
under the jack.
3. Insert the jack handle into the jack.
7-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page261
Thursday, August 25 2005 4:59 PM
Black plate (261,1)
In Case of an Emergency
Flat Tire
To install the nut
qLocking Lug Nuts
1. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
If your vehicle has optional antitheft
wheel lug nuts, one on each wheel will
lock the tires and you must use a special
key to unlock them. This key is attached
to the lug wrench and is stored with the
spare tire. Register them with the lock
manufacturer by filling out the card
provided in the glove box and mailing it
in the accompanying envelope. If you lose
this key, consult an Authorized Mazda
Dealer or use the lock manufacturer's
order form, which is with the registration
card.
2. Place the lug wrench on top of the key,
apply pressure, and turn it clockwise.
qMounting the Tire
1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
Antitheft lug nut
Special key
To remove an antitheft lug nut
1. Obtain the key for the antitheft lug nut.
WARNING
2. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
Removing Dirt and Grime from
Wheels, Hubs and Hub Bolts:
When changing or replacing a tire,
not removing dirt and grime from the
mounting surfaces of the wheel, hub
and hub bolts is dangerous. The lug
nuts could loosen while driving and
cause the tire to come off, resulting in
an accident. Make sure the mounting
surfaces of the wheel, hub and lug
nuts are clean before changing or
replacing tires.
3. Place the lug wrench on top of the key
and apply pressure. Turn the wrench
counterclockwise.
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page262
Thursday, August 25 2005 4:59 PM
Black plate (262,1)
In Case of an Emergency
Flat Tire
2. Mount the tire.
4. Turn the jack handle counterclockwise
and lower the vehicle. Use the lug
wrench to tighten the nuts in the order
shown.
3. Install the lug nuts with the beveled
edge inward; tighten them by hand.
If you're unsure of how tight the nuts
should be, have them inspected at an
Authorized Mazda Dealer.
WARNING
Don't Apply Oil or Grease to Lug
Nuts, Bolts:
Nut tightening torque
88―118
N·m (kgf·m, ft·lbf)
Applying oil or grease to lug nuts and
bolts is dangerous. The lug nuts could
loosen while driving and cause the tire
to come off, resulting in an accident.
In addition, lug nuts and bolts could
be damaged if tightened more than
necessary. Do not apply oil or grease
to lug nuts and bolts and do not
tighten the lug nuts beyond the
recommended tightening torque.
(9―12, 65―87)
7-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page263
Thursday, August 25 2005 4:59 PM
Black plate (263,1)
In Case of an Emergency
Flat Tire
WARNING
Loose Lug Nuts:
Improperly or loosely tightened lug
nuts are dangerous. The wheel could
wobble or come off. This could result
in loss of vehicle control and cause a
serious accident. Always securely and
correctly tighten the lug nuts.
Metric Studs and Lug Nuts:
Because the wheel studs and lug nuts
on your Mazda have metric threads,
using a non-metric nut is dangerous.
On a metric stud, it would not secure
the wheel and would damage the stud,
which could cause the wheel to slip off
and cause an accident. Be sure to
reinstall the same nuts you removed or
replace them with metric nuts of the
same configuration.
5. Check the inflation pressure. Refer to
the specification charts on page 10-6.
WARNING
Incorrect Tire Air Pressure:
Driving on tires with incorrect air
pressure is dangerous. Tires with
incorrect pressure could affect
handling and result in an accident.
Don't drive with any tires that have
incorrect air pressure.
NOTE
To prevent the jack and tool from
rattling, store them properly.
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page264
Thursday, August 25 2005 4:59 PM
Black plate (264,1)
In Case of an Emergency
Overheating
NOTE
Overheating
Once the engine coolant exceeds a
preset temperature, an electrical cooling
fan turns on. It will continue running
for about 10 minutes after the ignition
switch is turned to off.
If the temperature gauge indicates
overheating, the vehicle loses power, or
you hear a loud knocking or pinging
noise, the engine is probably too hot.
WARNING
If the temperature gauge indicates
overheating:
1. Drive safely to the side of the road and
park off the right-of-way.
Electrical Fan and Engine
Inspection:
2. Put a vehicle with an automatic
transmission in park (P), a manual
transmission in neutral.
Working near the electrical cooling
fan when it is running is dangerous.
You could be hit by the fan and
seriously injured. Turn off the ignition
switch and make sure the fan is not
running before attempting to work
near the electrical cooling fan.
Apply the parking brake.
3. Turn off the air conditioner.
4. Check whether coolant or steam is
escaping from under the hood or from
the engine compartment.
If steam is coming from the engine
compartment:
Don't go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the hood and start the engine.
Cooling System Cap:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury. Don't remove the cooling
system cap when the engine and
radiator are hot.
If neither coolant nor steam is
escaping:
Steam from Overheated Engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you. Open the hood
ONLY after steam is no longer
escaping from the engine.
Open the hood and idle the engine until
it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the engine
temperature will increase. Stop the
engine and call an Authorized Mazda
Dealer.
7-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page265
Thursday, August 25 2005 4:59 PM
Black plate (265,1)
In Case of an Emergency
Overheating
5. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
6. When cool, check the coolant level.
If it's low, look for coolant leaks from
the radiator and hoses.
If you find a leak or other damage, or if
coolant is still leaking:
Stop the engine and call an Authorized
Mazda Dealer.
If you find no problems, the engine is
cool, and no leaks are obvious:
Carefully add coolant as required (page
CAUTION
If the engine continues to overheat or
frequently overheats, have the cooling
system inspected. The engine could be
seriously damaged unless repairs are
made. Consult an Authorized Mazda
Dealer.
7-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page266
Thursday, August 25 2005 4:59 PM
Black plate (266,1)
In Case of an Emergency
Emergency Starting
Starting a Flooded Engine
If the engine does not start the first time,
perform the following procedure to start
the engine.
1. While the accelerator pedal is fully
depressed, turn the ignition switch to
the START position and crank the
engine for about 7 to 8 seconds.
2. Release the ignition switch and
accelerator pedal.
3. Start the engine as normally without
depressing the accelerator.
l
The fuel injection is cut by fully
depressing the accelerator pedal.
l
If the engine starts during Step 1, the
engine will rev up. Release the ignition
switch and accelerator pedal
immediately.
l
Avoid racing the engine or driving the
vehicle right after starting the engine.
l
Do not hold the ignition switch in the
START position for over 10 seconds. It
may damage the starter and drain the
battery.
l
If the engine still does not start using
the above procedure, have your vehicle
inspected by an Authorized Mazda
Dealer.
7-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page267
Thursday, August 25 2005 4:59 PM
Black plate (267,1)
In Case of an Emergency
Emergency Starting
Jump-Starting
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent service
technician do the work.
WARNING
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Eye Protection:
Working without eye protection is dangerous. Battery fluid contains SULFURIC
ACID which could cause blindness if splashed into your eyes. Also, hydrogen gas
produced during normal battery operation, could ignite and cause the battery to
explode. Always wear eye protection when working near the battery.
Spilled Battery Fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets
in eyes, skin or clothing. If this happens, immediately flush your eyes with water for
15 minutes or wash your skin thoroughly and get medical attention. Wear eye
protection and protective gloves to prevent contact with battery fluid.
Children and Batteries:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin. Always keep batteries out of the
reach of children.
7-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page268
Thursday, August 25 2005 4:59 PM
Black plate (268,1)
In Case of an Emergency
Emergency Starting
WARNING
Keep Flames Away:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells. When working near a battery, do
not allow metal tools to contact the positive ( ) or negative ( ) terminal of the
battery. Do not allow the positive ( ) terminal to contact any other metal object that
could cause sparks.
Battery-Related Explosion:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames, including
cigarettes, and sparks away from open battery cells.
Low Fluid Level or Frozen Battery:
Jump-starting a frozen battery or one with a low fluid level is dangerous. It may
rupture or explode, causing serious injury.
Don't jump-start a frozen battery or one with a low fluid level.
Connecting Jumper Cable Directly to Negative Terminal:
Connecting the end of the second jumper cable to the negative ( ) terminal of the
discharged battery is dangerous.
A spark could cause the gas around the battery to explode and injure someone.
Connect the negative cable to a good ground point away from the battery.
Connecting Jumper Cable to Moving Parts:
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.
The cable could get caught when the engine starts and cause serious injury. Route the
jumper cables away from parts that will be moving.
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in
series or a 24 V motor generator set).
7-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page269
Thursday, August 25 2005 4:59 PM
Black plate (269,1)
In Case of an Emergency
Emergency Starting
1. Remove the engine cover.
4. Make sure the booster battery is 12 V
and that its negative terminal is
grounded.
5. If the booster battery is in another
vehicle, don't allow the vehicles to
touch. Turn off the engine of the
vehicle with the booster battery and all
unnecessary electrical loads in both
vehicles.
6. Connect the jumper cables in the exact
sequence as in the illustration.
l
Connect one end of a cable to the
2. Remove the rubber hose from the
battery cover.
positive terminal on the discharged
battery (1).
l
Attach the other end to the positive
terminal on the booster battery (2).
l
Connect one end of the other cable
to the negative terminal of the
booster battery (3).
l
Connect the other end to a solid,
stationary, exposed metallic point
(for example, the tightening bolt)
away from the discharged battery
(4).
Connect cables
in numerical
3. Remove the battery cover from its rear
side.
order and
Discharged
disconnect in
battery
reverse order.
Booster battery
7. Start the engine of the booster vehicle
and run it a few minutes. Then start the
engine of the other vehicle.
7-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page270
Thursday, August 25 2005 4:59 PM
Black plate (270,1)
In Case of an Emergency
Emergency Starting
8. When finished, carefully disconnect the
cables in the reverse order described in
Step 6.
Push-Starting
WARNING
NOTE
Towing a Vehicle to Start It:
Towing a vehicle to start it is
dangerous. The vehicle being towed
could surge forward when its engine
starts, causing the two vehicles to
collide. The occupants could be
injured. Never tow a vehicle to start it.
Verify that the engine cover is securely
installed.
You can't start a vehicle with an automatic
transmission by pushing it.
CAUTION
Do not push-start a vehicle that has a
manual transmission. It can damage the
emission control system.
7-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page271
Thursday, August 25 2005 4:59 PM
Black plate (271,1)
In Case of an Emergency
Emergency Towing
Towing Description
CAUTION
We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.
Don't tow the vehicle pointed forward
with driving wheels on the ground. This
may cause internal damage to the
transmission.
Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.
A towed vehicle usually should have its
rear wheels off the ground. If excessive
damage or other conditions prevent this,
use wheel dollies.
CAUTION
Don't tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.
Wheel dollies
7-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page272
Thursday, August 25 2005 4:59 PM
Black plate (272,1)
In Case of an Emergency
Emergency Towing
Tiedown Hooks
CAUTION
CAUTION
The cap cannot be completely removed.
Do not use excessive force as it may
damage the cap or scratch the painted
bumper surface.
Don't use the tiedown hooks under the
front and rear for towing.
They are designed ONLY for tying
down the vehicle when it's being
transported. Using them for towing will
damage the bumper.
3. Securely install the tiedown eyelet
using the lug wrench.
Front
qTiedown Hooks
1. Remove the tiedown eyelet and the lug
wrench from the trunk (page 7-3).
2. Wrap the lug wrench with a soft cloth
to prevent damage to the bumper and
open the cap located on the front and
rear bumper.
Front
Rear
Rear
7-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page273
Thursday, August 25 2005 4:59 PM
Black plate (273,1)
In Case of an Emergency
Emergency Towing
4. Hook the tying rope to the tiedown
eyelet.
Recreational Towing
An example of “recreational towing” is
towing your vehicle behind a motorhome.
The transmission is not designed for
towing this vehicle on all 4 wheels.
When doing recreational towing refer to
carefully follow the instructions.
Front
Rear
CAUTION
If the tiedown eyelet is not securely
tightened, it may loosen or disengage
from the bumper when tying down the
vehicle. Make sure that the tiedown
eyelet is securely tightened to the
bumper.
7-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page274
Thursday, August 25 2005 4:59 PM
Black plate (274,1)
7-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page276
Thursday, August 25 2005 4:59 PM
Black plate (276,1)
Maintenance and Care
Introduction
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your vehicle
when using this manual for inspection and maintenance.
If you're unsure about any procedure it describes, we strongly urge you to have a reliable
and qualified service shop perform the work, preferably an Authorized Mazda Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Without this expertise and the parts that have been designed and made especially for your
Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
The owner should retain evidence that proper maintenance has been performed as
prescribed.
Claims against the warranty resulting from lack of maintenance, as opposed to defective
materials or authorized Mazda workmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's original equipment may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using genuine Mazda parts.
8-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page277
Thursday, August 25 2005 4:59 PM
Black plate (277,1)
Maintenance and Care
Scheduled Maintenance
Scheduled Maintenance
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
l
Repeated short-distance driving
l
Driving in dusty conditions
l
Driving with extended use of brakes
l
Driving in areas where salt or other corrosive materials are being used
l
Driving on rough or muddy roads
l
Extended periods of idling or low-speed operation
l
Driving for long periods in cold temperatures or extremely humid climates
NOTE
After the prescribed period, continue to follow the described maintenance at the
recommended intervals.
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page278
Thursday, August 25 2005 4:59 PM
Black plate (278,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 1
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
6
12
24
15
18
36
24
48
30
30
60
36
72
45
42
84
48
96
60
Maintenance Interval
12
7.5
22.5
37.5
52.5
ENGINE
Engine oil
R
R
R
R
R
R
R
R
I
R
R
R
R
R
R
R
R
I
Engine oil filter
Drive belt
AIR FILTER
Air filter
C
C
R
R
C
IGNITION SYSTEM
Spark plugs
FUEL SYSTEM
Fuel filter
Fuel lines, hoses and connections*1
COOLING SYSTEM
Cooling system
Replace every 160,000 km (100,000 miles)
I
I
I
I
Replace at first 192,000 km (120,000 miles) or 120 months ;
after that, every 96,000 km (60,000 miles) or 60 months
FL22 type*2
Engine coolant
Replace at first 96,000 km (60,000 miles) or 48 months ;
after that, every 24 months
Others
CHASSIS and BODY
Brake line, hoses and connection
Disc brakes
I
I
I
I
I
I
Tire (rotation)
Rotate every 12,000 km (7,500 miles)
Steering operation and linkages
I
I
I
I
Front and rear suspension and ball joints
Manual transmission oil
Rear differential oil
R
R
I
Driveshaft dust boots
I
Exhaust system and heat shields
All locks and hinges
Flat tire repair kit*3
Inspect every 72,000 km (45,000 miles) or 60 months
L
L
L
L
L
L
L
L
Inspect every year
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page279
Thursday, August 25 2005 4:59 PM
Black plate (279,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
6
12
24
15
18
36
24
48
30
30
60
36
72
45
42
84
48
96
60
Maintenance Interval
12
7.5
22.5
37.5
52.5
AIR CONDITIONER SYSTEM
Cabin air filter (if installed)
Replace every 40,000 km (25,000 miles) or 24 months
Chart symbols
I: Inspect and repair, clean, adjust, or replace if necessary.
R: Replace
L: Lubricate
C: Clean
Remarks
*1 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
*2 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*3 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page280
Thursday, August 25 2005 4:59 PM
Black plate (280,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 2
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
ENGINE
Puerto Rico
Others
Replace every 5,000 km (3,000 miles) or 3 months
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
I
R
R
R
R
R
R
R
R
R
R
R
R
I
Engine oil filter
Drive belt
AIR FILTER
Air filter
C
C
R
R
C
IGNITION SYSTEM
Spark plugs
FUEL SYSTEM
Fuel filter
Fuel lines, hoses and connections*1
COOLING SYSTEM
Cooling system
Replace every 160,000 km (100,000 miles)
I
I
I
I
Replace at first 192,000 km (120,000 miles) or 120 months ;
after that, every 96,000 km (60,000 miles) or 60 months
FL22 type*2
Engine coolant
Replace at first 96,000 km (60,000 miles) or 48 months ;
after that, every 24 months
Others
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
ELECTRICAL SYSTEM
Function of all lights
I
I
I
I
I
I
I
I
I
I
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page281
Thursday, August 25 2005 4:59 PM
Black plate (281,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
CHASSIS and BODY
Brake line, hoses and connection
Brake and clutch fluid level
Brake fluid
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
R
I
R
I
Disc brakes
I
I
Tire (rotation)
Rotate every 8,000 km (5,000 miles)
Tire inflation pressure and tire wear
Steering operation and linkages
I
I
I
I
I
I
I
I
I
Front and rear suspension and ball joints
Manual transmission oil
Rear differential oil
I
I
R
R
I
R
R
I
Driveshaft dust boots
Exhaust system and heat shields
All locks and hinges
Inspect every 72,000 km (45,000 miles) or 60 months
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
Washer fluid level
Flat tire repair kit*3
Inspect every year
AIR CONDITIONER SYSTEM
Cabin air filter (if installed)
Replace every 40,000 km (25,000 miles) or 24 months
Chart symbols
I: Inspect and repair, clean, adjust, or replace if necessary.
R: Replace
L: Lubricate
C: Clean
Remarks
*1 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
*2 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*3 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the
tire repair fluid bottle with new one before the expiration date.
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page282
Thursday, August 25 2005 4:59 PM
Black plate (282,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Schedule
The owner or a qualified service technician should make these vehicle inspections at the
indicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified service
technician as soon as possible.
qWhen Refueling
l
Brake and clutch fluid level (page 8-18)
l
Engine coolant level (page 8-15)
l
Engine oil level (page 8-13)
l
Washer fluid level (page 8-19)
qAt Least Monthly
Tire inflation pressures (page 8-27)
qAt Least Twice a Year (For Example, Every Spring and Fall)
You can do the following scheduled maintenance items if you have some mechanical
ability and a few basic tools and if you closely follow the directions in this manual.
l
Air filter (page 8-21)
l
Engine coolant (page 8-15)
l
Engine oil (page 8-14)
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page283
Thursday, August 25 2005 4:59 PM
Black plate (283,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives instructions only
for items that are easy to perform.
qualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.
For details, read the separate Mazda Warranty statement provided with the vehicle. If
you're unsure about any servicing or maintenance procedure, have it done by an
Authorized Mazda Dealer.
There are strict environmental laws regarding the disposal of waste oil and fluids. Please
dispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized
Mazda Dealer.
WARNING
Maintenance Procedures:
Performing maintenance work on a vehicle is dangerous if not done properly. You can
be seriously injured while performing some maintenance procedures. If you lack
sufficient knowledge and experience or the proper tools and equipment to do the work,
have it done by a qualified technician.
Running the Engine:
Working under the hood with the engine running is dangerous. It becomes even more
dangerous when you wear jewelry or loose clothing.
Either can become entangled in moving parts and result in injury.
Therefore, if you must run the engine while working under the hood, make certain
that you remove all jewelry (especially rings, bracelets, watches, and necklaces) and
all neckties, scarves, and similar loose clothing before getting near the engine or
cooling fan which may turn on unexpectedly.
Electrical Fan and Engine Inspection:
Working near the electrical cooling fan when it is running is dangerous. You could be
hit by the fan and seriously injured. Turn off the ignition switch and make sure the
fan is not running before attempting to work near the electrical cooling fan.
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page284
Thursday, August 25 2005 4:59 PM
Black plate (284,1)
Maintenance and Care
Owner Maintenance
NOTE
Once the engine coolant exceeds a preset temperature, an electrical cooling fan turns on.
It will continue running for about 10 minutes after the ignition switch is turned to off.
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page285
Thursday, August 25 2005 4:59 PM
Black plate (285,1)
Maintenance and Care
Owner Maintenance
Engine Compartment Overview
Engine oil-filler cap
Engine oil dipstick
Brake/Clutch fluid
reservoir
Windshield washer
fluid reservoir
Cooling system cap
Engine coolant reservoir
Fuse block (next
to air filter)
Fuse block
Battery
(near battery)
Air filter
8-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page286
Thursday, August 25 2005 4:59 PM
Black plate (286,1)
Maintenance and Care
Owner Maintenance
U.S.A. and CANADA
Engine Oil
NOTE
The Mazda RX-8 requires regular
checking of the engine oil level. The
compact, high performance RENESIS
rotary engine in your vehicle consumes
a small amount of engine oil due to its
structural design. An oil pump
(ILSAC)
optimizes the amount of oil injected to
lubricate the rotor seals in the
combustion cycle. Although your
vehicle is equipped with an engine oil
level warning light and an engine oil
pressure gauge, it is best to keep the
engine oil level in the range between
full and low by checking the oil
dipstick regularly. Mazda recommends
checking the oil level at every second
fuel filling. The oil consumption of the
engine depends on engine speed and
engine load. Under extreme driving
conditions, oil consumption can be
higher.
Only use oils “Certified For Gasoline
Engines” by the American Petroleum
Institute (API). An oil with this trademark
symbol conforms to the current engine
and emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
comprised of U.S. and Japanese
automobile manufacturers.
–30
–10
10
30
20
40 50
–20
0
qRecommended Oil
–20
Use SAE 5W-20 engine oil.
Oil container labels provide important
information.
80 100
120
0
20 40 60
A chief contribution this type of oil makes
to fuel economy is reducing the amount of
fuel necessary to overcome engine
friction.
5W-20
8-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page287
Thursday, August 25 2005 4:59 PM
Black plate (287,1)
Maintenance and Care
Owner Maintenance
Except U.S.A. and CANADA
4. Remove the engine cover.
(ILSAC)
The quality designation SL, or ILSAC
must be on the label.
5. Pull out the dipstick, wipe it clean, and
reinsert it fully.
–30
–10
10
30
20
40 50
–20
0
–20
80
100
120
0
20 40
60
Full
OK
5W-20
Low
6. Pull it out again and examine the level.
It's OK between L and F.
qInspecting Engine Oil Level
But if it's near or below L, add enough
oil to bring the level to F.
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
CAUTION
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
Don't add engine oil over F. This may
cause engine damage.
The distance between L and F on the
dipstick represents the following:
Oil capacity
L (US qt, Imp qt)
1.7 (1.8, 1.5)
8-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page288
Thursday, August 25 2005 4:59 PM
Black plate (288,1)
Maintenance and Care
Owner Maintenance
1. Remove the engine cover.
NOTE
l
Each mark from the F mark equates
to about 0.5 L (US 0.5 qt, Imp 0.4
qt).
There are 3 marks between L and F.
l
Verify that the engine cover is
securely installed.
qChanging Engine Oil and Filter
Change engine oil and filter according to
Scheduled Maintenance (page 8-3).
2. Warm up the engine for a few minutes
and turn it off. Remove the oil-filler
cap.
Please act responsibly―protect the
environment and take used oil to a
recycling facility. Ask your dealer or a
service station for information.
3. Remove the drain plug and drain the
oil into a suitable container.
4. Replace the plug tightly after the oil
has thoroughly drained.
WARNING
5. Fill the engine with new oil to the F
mark on the dipstick.
Handling Used Engine Oil:
Continuous contact with used engine
oil is dangerous. It could cause skin
cancer. Always wash with soap and
water immediately after changing oil
and filter.
6. Securely reinstall the oil-filler cap.
Tighten
Loosen
Changing engine oil
WARNING
Forward
Checking or Changing Engine Oil:
Hot engine oil is dangerous. If the
engine has been running, the engine
oil becomes very hot. You could be
seriously burned. Don't check or
change the engine oil when the engine
is hot.
Drain Plug
7. Start the engine and inspect around the
drain plug for leaks.
8. Turn it off and wait 5 minutes for the
oil to return to the oil pan.
8-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page289
Thursday, August 25 2005 4:59 PM
Black plate (289,1)
Maintenance and Care
Owner Maintenance
Check the oil level and fill to the F mark
if necessary.
Engine Coolant
qInspecting Coolant Level
With oil filter replacement
Oil capacity (reference only)
L (US qt, Imp qt)
3.5 (3.7, 3.1)
WARNING
Without oil filter replacement
Hot Engine:
Oil capacity (reference only)
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
coolant reservoir, but do not open it.
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS
HOT.
L (US qt, Imp qt)
3.3 (3.5, 2.9)
NOTE
l
The indicated engine oil capacities
are for general reference purposes
only. When adding or changing oil,
verify the engine oil level with the
oil dipstick.
l
l
Use only specified engine oil (page
Verify that the engine cover is
securely installed.
Electrical Fan and Engine
Inspection:
Working near the electrical cooling
fan when it is running is dangerous.
You could be hit by the fan and
seriously injured. Turn off the ignition
switch and make sure the fan is not
running before attempting to work
near the electrical cooling fan.
Changing oil filter
Because you need a special tool to
retighten the filter, an Authorized Mazda
Dealer should do the work.
Cooling System Cap:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury. Don't remove the cooling
system cap when the engine and
radiator are hot.
8-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page290
Thursday, August 25 2005 4:59 PM
Black plate (290,1)
Maintenance and Care
Owner Maintenance
NOTE
CAUTION
Once the engine coolant exceeds a
preset temperature, an electrical cooling
fan turns on. It will continue running
for about 10 minutes after the ignition
switch is turned to off.
Radiator coolant will damage paint.
Rinse it off quickly if spilled.
If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling
where temperatures may drop below
freezing.
qChanging Coolant
Change coolant according to Scheduled
Maintenance (page 8-3).
CAUTION
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
l
Use only soft (demineralized) water
in the coolant mixture. Water that
contains minerals will cut down on
the coolant's effectiveness.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool.
l
Don't add only water. Always add a
proper coolant mixture.
l
The engine has aluminum parts and
must be protected by an ethylene-
glycol-based coolant to prevent
corrosion and freezing.
l
DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.
l
DO NOT MIX alcohol or methanol
with the coolant. This could damage
the cooling system.
If it's at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
l
Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.
8-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page291
Thursday, August 25 2005 4:59 PM
Black plate (291,1)
Maintenance and Care
Owner Maintenance
To change coolant
NOTE
If the “FL22” mark is shown on or near
the cooling system cap, use FL22 type
engine coolant. If engine coolant other
than FL22 type is used, the engine
coolant must be replaced earlier than
the specified replacement interval
indicated in the scheduled maintenance
(page 8-3).
WARNING
Removing the Cooling System Cap:
Removing the cooling system cap
while the engine is running or hot is
dangerous. This might lead to cooling
system and engine damage and could
result in serious injury from escaping
hot coolant or steam. Turn off the
engine and wait until it's cool. Even
then, be very careful when removing
the cap. Wrap a thick cloth around the
cap and slowly turn it
counterclockwise to the first stop.
Step back while the pressure escapes.
When you're sure all the pressure is
gone, press down on the cap ― still
using a cloth ― turn the cap, and
remove it.
1. Remove the cooling system cap.
Except FL22 type
For mixture percentage:
Volume
2. Only when the engine is cool, loosen
the radiator drain plug and drain the
coolant into a suitable container.
Protection
Antifreeze
solution
Demineralized
water
Properly dispose of the used coolant.
_
Above 16°C
35%
45%
55%
65%
55%
45%
3. With the drain plug loose but not fully
removed, flush out the system with
running water.
(3°F)
_
Above 26°C
_
( 15°F)
_
Above 40°C
_
( 40°F)
Loosen
FL22 type
Tighten
Loosen
Tighten
FL22 type engine coolant concentration is
factory adjusted. Use the product as it is
without diluting it.
8-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page292
Thursday, August 25 2005 4:59 PM
Black plate (292,1)
Maintenance and Care
Owner Maintenance
4. Drain the system completely and
retighten the plug. Add as much
ethylene-glycol-based coolant mixture
and water as necessary to provide
freezing and corrosion protection.
Brake/Clutch Fluid
q
Inspecting Brake/Clutch Fluid Level
The brakes and clutch draw fluid from the
same reservoir.
Inspect the fluid level in the reservoir
regularly. It should be kept at MAX.
The level normally drops with
5. In extremely cold climates, add the
mixture percentage recommended in
the coolant mixture percentage table.
accumulated distance, a condition
associated with wear of brake and clutch
linings. If it is excessively low, have the
brake/clutch system inspected by an
Authorized Mazda Dealer.
6. Reinstall the cooling system cap.
7. Run the engine at idle for about 10
minutes, then turn it off. If the coolant
level warning light comes on during
this time, turn the engine off.
After turning off the engine, inspect the
drain plug and the water hoses for
leaks.
8. After the engine has cooled, remove
the cooling system cap and inspect the
coolant level. If it's low, repeat steps 5
to 7.
NOTE
Because this procedure requires
technical expertise, we recommend that
it be done by an Authorized Mazda
Dealer.
8-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page293
Thursday, August 25 2005 4:59 PM
Black plate (293,1)
Maintenance and Care
Owner Maintenance
qAdding Brake/Clutch Fluid
Washer Fluid
qInspecting Washer Fluid Level
WARNING
Spilled Brake Fluid:
WARNING
Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with water
and get medical attention. Brake fluid
spilled on a hot engine could cause a
fire. Be careful not to spill brake fluid
on yourself or on the engine.
Substitute Washer Fluid:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the windshield,
affect your visibility, and could result
in an accident. Use only windshield
washer fluid or plain water in the
reservoir.
Low Brake/Clutch Fluid Levels:
Low brake/clutch fluid levels are
dangerous. Low levels could signal
brake lining wear or a brake system
leak. Your brakes could fail and cause
an accident. If you find a low fluid
level, have the brakes and clutch
inspected.
Using Washer Fluid Without Anti-
freeze Protection in Cold Weather:
Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous as
it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer fluid
with anti-freeze protection.
If the fluid level is low, add fluid until it
reaches MAX.
Before adding fluid, thoroughly clean the
area around the cap.
NOTE
State or local regulations may restrict
the use of volatile organic compounds
(VOCs), which are commonly used as
anti-freeze agents in washer fluid. A
washer fluid with limited VOC content
should be used only if it provides
adequate freeze resistance for all
regions and climates in which the
vehicle will be operated.
CAUTION
l
Brake and clutch fluid will damage
painted surfaces. If brake or clutch
fluid does get on a painted surface,
wipe it off immediately.
l
Using nonspecified brake and clutch
systems. Mixing different fluids will
also damage them.
If the brake/clutch system frequently
requires new fluid, consult an
Authorized Mazda Dealer.
8-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page294
Thursday, August 25 2005 4:59 PM
Black plate (294,1)
Maintenance and Care
Owner Maintenance
Inspect fluid level in the washer fluid
reservoir; add fluid if necessary.
Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Full
OK
Make sure the hood's secondary latch
keeps the hood from opening when the
primary latch is released.
Low
Use plain water if washer fluid is
unavailable.
But use only washer fluid in cold weather
to prevent it from freezing.
8-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page295
Thursday, August 25 2005 4:59 PM
Black plate (295,1)
Maintenance and Care
Owner Maintenance
3. Unfasten the clamps.
Air Filter
CAUTION
Don't drive without an air filter. This
could result in excessive engine wear.
This air filter may be cleaned with
compressed air and reused, or replaced,
depending on its condition. Unless it is
very dirty, simply shake it to remove
foreign particles. Each time you inspect it,
wipe inside the air cleaner housing with a
damp cloth.
4. Lift off the air filter cover and remove
the filter.
qReplacing the Air Filter
Air filter cover
NOTE
If the vehicle is operated in very dusty
or sandy areas, replace the filter more
often than recommended intervals.
Air filter
1. Make sure the ignition switch is turned
off.
2. Disconnect the electrical connector.
5. Wipe inside the air cleaner housing
with a damp cloth.
6. Clean or replace the filter.
7. Install in the reverse order of removal.
Replace the filter according to Scheduled
Maintenance (page 8-3).
NOTE
After installing the air filter cover, make
sure the electrical connector is securely
connected.
8-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page296
Thursday, August 25 2005 4:59 PM
Black plate (296,1)
Maintenance and Care
Owner Maintenance
NOTE
Wiper Blades
CAUTION
To prevent damage to the wiper arm
blades when raising both the driver and
passenger side wiper arms, raise the
driver side wiper arm first. Conversely,
when setting down the wiper arms, set
the passenger side wiper arm down
first.
l
Hot waxes applied by automatic car
washers have been known to affect
the wiper's ability to clean windows.
l
To prevent damage to the wiper
blades, don't use gasoline, kerosene,
paint thinner, or other solvents on or
near them.
1. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
q
Replacing Windshield Wiper Blades
Plastic locking clip
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the windshield let
the wiper arm down easily, don't let it
slap down on the windshield.
CAUTION
To prevent damage to the wiper arms
and other components, don't try to
sweep the wiper arm by hand.
8-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page297
Thursday, August 25 2005 4:59 PM
Black plate (297,1)
Maintenance and Care
Owner Maintenance
2. Hold the end of the rubber and pull
until the tabs are free of the metal
support.
CAUTION
l
l
Don't bend or discard the stiffeners.
You need to use them again.
If the metal stiffeners are switched,
the blade's wiping efficiency could
be reduced.
Metal support
So don't use the driver's side metal
stiffeners on the passenger's side, or
vice versa.
Tab
l
Be sure to reinstall the metal
stiffeners in the new blade rubber so
that the curve is the same as it was in
the old blade rubber.
3. Remove the metal stiffeners from the
blade rubber and install them in new
blades.
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
NOTE
Install the blade so that the tabs are
toward the bottom of the wiper arm.
8-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page298
Thursday, August 25 2005 4:59 PM
Black plate (298,1)
Maintenance and Care
Owner Maintenance
Battery
WARNING
Battery-Related Lead Materials:
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and reproductive harm.
Wash hands after handling.
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Eye Protection:
Working without eye protection is dangerous. Battery fluid contains SULFURIC
ACID which could cause blindness if splashed into your eyes. Also, hydrogen gas
produced during normal battery operation, could ignite and cause the battery to
explode. Always wear eye protection when working near the battery.
Spilled Battery Fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets
in eyes, skin or clothing. If this happens, immediately flush your eyes with water for
15 minutes or wash your skin thoroughly and get medical attention. Wear eye
protection and protective gloves to prevent contact with battery fluid.
Children and Batteries:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin. Always keep batteries out of the
reach of children.
8-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page299
Thursday, August 25 2005 4:59 PM
Black plate (299,1)
Maintenance and Care
Owner Maintenance
WARNING
Keep Flames Away:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells. When working near a battery, do
not allow metal tools to contact the positive ( ) or negative ( ) terminal of the
battery. Do not allow the positive ( ) terminal to contact the vehicle body.
Battery-Related Explosion:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames, including
cigarettes, and sparks away from open battery cells.
8-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page300
Thursday, August 25 2005 4:59 PM
Black plate (300,1)
Maintenance and Care
Owner Maintenance
l
l
Rinse off spilled electrolyte
immediately with a solution of water
and baking soda.
NOTE
l
Remove the engine and battery
covers before performing battery
maintenance.
If the vehicle will not be used for an
extended time, disconnect the battery
cables.
Engine cover
Battery cover
l
If the cover has been removed,
install it in the reverse order of
removal.
qBattery Maintenance
To get the best service from a battery:
l
Keep it securely mounted.
l
Keep the top clean and dry.
l
Keep terminals and connections clean,
tight, and coated with petroleum jelly
or terminal grease.
8-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page301
Thursday, August 25 2005 4:59 PM
Black plate (301,1)
Maintenance and Care
Owner Maintenance
The Tire Pressure Monitoring Systemí
does not alleviate the need to check the
tire condition every day, including
whether the tires all look inflated properly.
Inspect all tire pressure monthly
(including the spareí) when the tires are
cold. Maintain recommended pressures
for the best ride, top handling, and
minimum tire wear.
Tires
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tire inflation pressures and
stay within the recommended load limits
and weight distribution.
When checking the tire pressures, use of a
digital tire pressure gauge is
WARNING
recommended.
Using Different Tire Types:
Driving your vehicle with different
types of tires is dangerous. It could
cause poor handling and poor
braking; leading to loss of control.
Use all radial, all bias-belted, or all
bias-type tires.
Using Wrong-Sized Tires:
Using any other tire size than what is
specified for your Mazda (page 10-6)
is dangerous. It could seriously affect
ride, handling, ground clearance, tire
clearance, and speedometer
calibration. This could cause you to
have an accident. Use only tires that
are the correct size specified for your
Mazda.
Refer to the specification charts (page
qTire Inflation Pressure
WARNING
Incorrect Tire Inflation:
Overinflation or underinflation of tires
is dangerous. Adverse handling or
unexpected tire failure could result in
a serious accident. Always inflate the
tires to the correct pressure (page
íSome models.
8-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page302
Thursday, August 25 2005 4:59 PM
Black plate (302,1)
Maintenance and Care
Owner Maintenance
NOTE
l
Always check tire pressure when
tires are cold.
l
Warm tires normally exceed
recommended pressures. Don't
release air from warm tires to adjust
the pressure.
l
Underinflation can cause reduced
Forward
fuel economy, uneven and
accelerated tire wear, and poor
sealing of the tire bead, which will
deform the wheel and cause
separation of tire from rim.
Also, inspect them for uneven wear and
damage. Abnormal wear is usually caused
by one or a combination of the following:
l
Overinflation can produce a harsh
ride, uneven and accelerated tire
wear, and a greater possibility of
damage from road hazards.
Keep your tire pressure at the correct
levels. If one frequently needs
inflating, have it inspected.
l
Incorrect tire pressure
l
Improper wheel alignment
l
Out-of-balance wheel
l
Severe braking
After rotation, inflate all tire pressures to
lug nuts for tightness.
qTire Rotation
To equalize tread wear, rotate the tires if
irregular wear develops. According to the
scheduled maintenance charts.Refer to
Scheduled Maintenance on page 8-3.
During rotation, inspect them for correct
balance.
CAUTION
Rotate unidirectional tires and radial
tires that have an asymmetrical tread
pattern or studs only from front to rear,
not from side to side. Tire performance
will be weakened if rotated from side to
side.
NOTE
Because your vehicle is not equipped
with a spare tire, you cannot do a tire
rotation safely with the jack that comes
with your vehicle. Have an Authorized
Mazda Dealer perform tire rotation.
8-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page303
Thursday, August 25 2005 4:59 PM
Black plate (303,1)
Maintenance and Care
Owner Maintenance
NOTE
CAUTION
(With Tire Pressure Monitoring
System)
Limited-Slip Differential system;
don't use the following:
l
When tires with steel wire
l
Tires not of the designated size
reinforcement in the sidewalls are
used, the system may not function
correctly even with a genuine wheel.
Refer to System Error Activation on
page 5-29.
l
Tires of different sizes or types at the
same time
l
Tires not sufficiently inflated
If these instructions aren't followed, the
rotation of the left and right wheels will
be different and will thus apply a
constant load on the limited-slip
differential.
l
Be sure to install the tire pressure
sensors whenever tires or wheels are
replaced.
Refer to Tires and Wheels on page
This will cause a malfunction.
If a tire wears evenly, a wear indicator
will appear as a solid band across the
tread.
qReplacing a Tire
Replace the tire when this happens.
WARNING
Tread wear indicator
Worn Tires:
Driving with worn tires is dangerous.
Reduced braking, steering, and
traction could result in an accident.
Always use tires that are in good
condition.
CAUTION
New tread
Worn tread
(With Tire Pressure Monitoring
System)
When replacing/repairing the tires or
wheels or both, have the work done by
an Authorized Mazda Dealer, or the tire
pressure sensors may be damaged.
You should replace it before the band is
across the entire tread.
8-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page304
Thursday, August 25 2005 4:59 PM
Black plate (304,1)
Maintenance and Care
Owner Maintenance
NOTE
CAUTION
Tires degrade over time, even when
they are not being used on the road. It is
recommended that tires generally be
replaced when they are 6 years or older.
Heat caused by hot climates or frequent
high loading conditions can accelerate
the aging process. You should replace
the spare tire when you replace the
other road tires due to the aging of the
spare tire. Regarding the manufacturing
week and year is indicated with 4 digit.
Refer to The tire labeling on page 9-18.
l
Don't use your temporary spare tire
rim with a snow tire or a
conventional tire. Neither will
properly fit and could damage both
tire and rim.
l
l
The temporary spare tire has a tread
life of less than 5,000 km (3,000
miles). The tread life may be shorter
depending on driving conditions.
The temporary spare tire is for
limited use, however, if the tread
wear solid-band indicator appears,
replace the tire with the same type of
temporary spare (page 8-29).
qTemporary Spare Tire
Your Mazda is not equipped with a spare
tire. If you require a spare tire, consult an
Authorized Mazda Dealer.
NOTE
Tires degrade over time, even when
they are not being used on the road. It is
recommended that tires generally be
replaced when they are 6 years or older.
Heat caused by hot climates or frequent
high loading conditions can accelerate
the aging process. You should replace
the spare tire when you replace the
other road tires due to the aging of the
spare tire. Regarding the manufacturing
week and year is indicated with 4 digit.
Refer to The tire labeling on page 9-18.
Inspect the temporary spare tire at least
monthly to make sure it's properly inflated
and stored.
NOTE
The temporary spare tire condition
gradually deteriorates even if it has not
been used.
The temporary spare tire is easier to
handle because of its construction. It is
lighter and smaller than a conventional
tire and should be used only for an
emergency and only for a short distance.
Use the temporary only until the
conventional tire is repaired, which should
be as soon as possible.
Maintain its pressure at 420 kPa (4.2
kgf/cm2 or bar, 60 psi).
8-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page305
Thursday, August 25 2005 4:59 PM
Black plate (305,1)
Maintenance and Care
Owner Maintenance
qReplacing a Wheel
NOTE
Be sure to install the tire pressure
sensors whenever tires or wheels are
replaced. Refer to Tires and Wheels on
page 5-30.
WARNING
Using a Wrong-Sized Wheel:
Using a wrong-sized wheel is
dangerous. Braking and handling
could be affected, leading to loss of
control and an accident. Always use
wheels of the correct size on your
vehicle.
When replacing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
CAUTION
l
A wrong-sized wheel may adversely
affect:
l
Tire fit
Wheel and bearing life
Ground clearance
Snow-chain clearance
Speedometer calibration
Headlight aim
Bumper height
Tire Pressure Monitoring System
l
l
l
l
l
l
l
l
Limited-Slip Differential System
l
(With Tire Pressure Monitoring
System)
l
When replacing/repairing the tires
or wheels or both, have the work
done by an Authorized Mazda
Dealer, or the tire pressure sensors
may be damaged.
l
The wheels equipped on your
Mazda are specially designed for
installation of the tire pressure
sensors. Do not use non-genuine
wheels, otherwise it may not be
possible to install the tire pressure
sensors.
8-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page306
Thursday, August 25 2005 4:59 PM
Black plate (306,1)
Maintenance and Care
Owner Maintenance
Light Bulbs
Brake lights/Taillights
Trunk light
Overhead light (Rear)
Rear side-marker lights
High-mount brake light
Rear turn signal lights
Reverse lights
Courtesy lights
License plate light
Overhead light/Map lights (Front)
Vanity mirror lights
Parking lights
Front side-marker lights
Front turn signal lights
Fog lights
Headlights (Low-beam)
Some models.
Headlights (High-beam)
8-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page307
Thursday, August 25 2005 4:59 PM
Black plate (307,1)
Maintenance and Care
Owner Maintenance
qReplacing a Headlight Bulb
WARNING
1. Make sure the ignition switch is turned
off and the headlight switch is off.
Xenon Fusion Bulb Replacement:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Do not replace the xenon
fusion bulbs yourself. Consult an
Authorized Mazda Dealer when the
replacement is necessary.
2. Lift the hood and find the high and low
beam bulbs in the rear of the headlight
unit.
The outboard bulb is the LOW beam,
and the inboard one is the HIGH beam.
Refer to Light Bulbs on page 8-32.
3. If you are changing the right headlight
bulb, start the engine, turn the steering
wheel all the way to the right, and turn
off engine. If you are changing the left
headlight bulb, turn the steering wheel
to the left.
Handling Halogen Bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries could
be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when lit.
Never touch the glass portion of the
bulb with your bare hands and always
wear eye protection when handling or
working around halogen bulbs.
4. Turn the center section of the plastic
retainer counterclockwise and remove
the retainers and partially peel back the
mudguard.
Removal
Installation
Children and Halogen Bulbs:
Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb or
breaking it some other way.
Always keep halogen bulbs out of the
reach of children.
8-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page308
Thursday, August 25 2005 4:59 PM
Black plate (308,1)
Maintenance and Care
Owner Maintenance
High-beam bulb
The bulbs must be replaced at an
Authorized Mazda Dealer.
1. Turn the socket and bulb assembly
counterclockwise and remove it.
Carefully remove the headlight bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.
(Halogen bulbs)
1. Detach the electrical connector from
the sealing cover by pulling it to the
rear.
2. Disconnect the bulb from the electrical
connector by pressing the tab on the
connector with your finger and pulling
the bulb upward.
2. Detach the sealing cover from the bulb.
3. Unhook the bulb retaining spring.
3. Install the new bulb in the reverse order
of removal.
NOTE
l
If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
l
Use the protective cover and carton
of the replacement bulb to dispose of
the old bulb promptly out of the
reach of children.
4. Swing the retaining spring out and
away to free the headlight bulb.
5. Carefully remove the headlight bulb
from the socket by pulling it straight
back.
Low-beam bulb
(Xenon fusion bulb)
6. Replace the bulb.
You cannot replace the low beam bulbs by
yourself.
7. Install the new bulb in the reverse order
of removal.
8-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page309
Thursday, August 25 2005 4:59 PM
Black plate (309,1)
Maintenance and Care
Owner Maintenance
Front turn signal lights, Parking lights,
Front side-marker lights
NOTE
l
If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
1. Turn the socket and bulb assembly
counterclockwise and remove it.
2. Disconnect the bulb from the socket.
l
Use the protective cover and carton
of the replacement bulb to dispose of
the old bulb promptly out of the
reach of children.
qReplacing a Fog Light Bulbí
Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.
Front turn signal
lights
Parking lights
qReplacing a Bulb (Front)
1. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the right, and turn off
engine. If you are changing the left
bulb, turn the steering wheel to the left.
2. Turn the center section of the plastic
retainer counterclockwise and remove
the retainers and partially peel back the
mudguard.
Removal
Front side-marker lights
3. Install the new bulb in the reverse order
of removal.
Installation
íSome models.
8-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page310
Thursday, August 25 2005 4:59 PM
Black plate (310,1)
Maintenance and Care
Owner Maintenance
Overhead light (Rear), Courtesy lights,
Vanity mirror lights
qReplacing a Bulb (Interior)
Overhead light/Map lights (Front)
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
screwdriver.
1. Remove the screws with a Phillips
screwdriver.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Disconnect the bulb by pulling it out.
Overhead light (Rear)
Edge
Courtesy lights
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
Edge
5. Install the new bulb in the reverse order
of removal.
8-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page311
Thursday, August 25 2005 4:59 PM
Black plate (311,1)
Maintenance and Care
Owner Maintenance
qReplacing a Bulb (Rear)
Vanity mirror lights
Rear turn signal lights, Brake lights/
Taillights, Reverse lights
1. Pull the center section of the plastic
retainer and remove the retainers and
partially open the trunk side trim.
Removal
Edge
3. Install the new bulb in the reverse order
of removal.
Installation
Trunk light
1. Press both sides of the lens cap to
remove it.
2. Disconnect the bulb by pulling it out.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
Rear turn signal lights
Brake lights/Taillights
Reverse lights
3. Install the new bulb in the reverse order
of removal.
4. Install the new bulb in the reverse order
of removal.
Rear side-marker lights
Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.
8-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page312
Thursday, August 25 2005 4:59 PM
Black plate (312,1)
Maintenance and Care
Owner Maintenance
High-mount brake light
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens with a flathead
screwdriver.
1. Turn the center section of the plastic
retainer counterclockwise and remove
the retainers and trunk rear trim.
Removal
3. Disconnect the bulb by pulling it out.
Edge
Installation
2. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Install the new bulb in the reverse order
of removal.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
License plate light
1. Press the front of the lens to detach the
front tabs.
8-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page313
Thursday, August 25 2005 4:59 PM
Black plate (313,1)
Maintenance and Care
Owner Maintenance
3. Pull the fuse straight out with the fuse
puller provided on the inside of the
engine compartment fuse block cover.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
qFuse Replacement
4. Inspect it and replace if it's blown.
Replacing the fuses on the driver's side
If the electrical system doesn't work, first
inspect fuses on the driver's side.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover.
Blown
Normal
5. Push in a new fuse of the same
amperage rating, and make sure it fits
tightly. If it doesn't, have an Authorized
Mazda Dealer install it.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or CIGAR circuit.
WARNING
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
8-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page314
Thursday, August 25 2005 4:59 PM
Black plate (314,1)
Maintenance and Care
Owner Maintenance
Replacing the fuses under the hood
3. If a fuse is blown, replace it with a new
one of the same amperage rating.
If the headlights or other electrical
components don't work and the fuses in
the cabin are OK, inspect the fuse block
under the hood. If a fuse is blown, it must
be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
Normal
Blown
Next to air filter
NOTE
l
To replace the MAIN fuse, contact
an Authorized Mazda Dealer (page
l
Verify that the engine cover is
securely installed.
Near battery
Engine cover
Battery cover
NOTE
Remove the engine and battery covers
before removing the fuse block cover
near the battery.
8-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page315
Thursday, August 25 2005 4:59 PM
Black plate (315,1)
Maintenance and Care
Owner Maintenance
qFuse Panel Description
Fuse block (Engine compartment)
(Next to air filter)
(Near battery)
FUSE
RATING
DESCRIPTION
PROTECTED COMPONENT
For protection of all circuits
1
2
3
MAIN
120A
40A
60A
HEATER
AIR PUMP
Heater
Air pump
Power windows, Power door locks, Illuminated entry system,
Moonroofí
4
BTN
30A
5
6
7
8
9
DEFOG
FAN
50A
40A
60A
30A
15A
15A
15A
15A
30A
20A
20A
10A
Rear window defroster
Electric fan
ABS, DSCí
ABS/DSC
ACC
Lighter, Power control mirror, Accessory socket, Audio system
HEAD
Headlight high beamsí, Headlight cleanerí
Headlight low beam (RH)
Headlight low beam (LH)
DRLí (Headlight high beams)
DSCí
10 HEAD LOW R
11 HEAD LOW L
12 DRL
13 DSC
14 SEAT WARM
15 H/CLEAN
16 R.FOG
Seat warmerí
Headlight cleanerí
―
íSome models.
8-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page316
Thursday, August 25 2005 4:59 PM
Black plate (316,1)
Maintenance and Care
Owner Maintenance
FUSE
RATING
DESCRIPTION
17 FOG
PROTECTED COMPONENT
15A
Fog lightsí
18 A/C MAG
19 IG
10A
Air conditioner
30A
For protection of various circuits
For protection of various circuits
Brake lights
20 IG KEY
21 STOP
15A
15A
22 FUEL PUMP
23 HORN
24 HAZARD
25 ETV
20A
Fuel pump
15A
Horn
15A
Hazard warning flashers, Turn signals
Electric throttle valve
Windshield wiper and washer
Power windows
15A
26 WIPER
27 P.WIND
20A
20A
Engine control system, Supplemental restraint system, ABS,
Power steering
28 ENGINE
29 TAIL
15A
10A
Taillights, License plate light, Parking lights, Front side-maker
lights, Rear side-marker lights
30 ILLUMI
31 EGI COMP1
32 EGI COMP2
33 EGI INJ
34 EPS
10A
10A
10A
15A
60A
Illuminated entry system
Engine control system
Engine control system
Fuel injector
Power steering
8-42
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page317
Thursday, August 25 2005 4:59 PM
Black plate (317,1)
Maintenance and Care
Owner Maintenance
Fuse panel (Driver's side)
FUSE
RATING
DESCRIPTION
PROTECTED COMPONENT
1
2
CIGAR
ACC
15A
7.5A
20A
7.5A
10A
10A
7.5A
20A
10A
7.5A
20A
30A
30A
15A
15A
10A
Lighter
Audio system, Power control mirror
3
AUX PWR
A/C
Accessory socket
4
Air conditioner
5
METER
TCM
Instrument cluster
6
Transmission control system
7
SPARE
SPARE
M.DEF
DSC
―
8
―
9
Mirror defrosterí
10
11
12
13
14
15
16
DSCí
AUDIO
D.LOCK
P.WIND
ROOM
SPARE
SPARE
Audio systemí
Power door locks, Moonroofí
Power windows
Interior lights
―
―
íSome models.
8-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page318
Thursday, August 25 2005 4:59 PM
Black plate (318,1)
Maintenance and Care
Appearance Care
qDamage Caused by Bird
How to Minimize
Environmental Paint Damage
Dropping, Insects, or Tree Sap
Occurrence
The paintwork on your Mazda represents
the latest technical developments in
composition and methods of application.
Bird droppings contain acids. If these
aren't removed they can eat away the clear
and color base coat of the vehicle's
paintwork.
Environmental hazards, however, can
harm the paint's protective properties, if
proper care is not taken.
When insects stick to the paint surface
and decompose, corrosive compounds
form. These can erode the clear and color
base coat of the vehicle's paintwork if
they are not removed.
Here are some examples of possible
damage, with tips on how to prevent
them.
Tree sap will harden and adhere
qEtching Caused by Acid Rain or
permanently to the paint finish. If you
scratch the sap off while it is hard, some
vehicle paint could come off with it.
Industrial Fallout
Occurrence
Prevention
Industrial pollutants and vehicle emissions
drift into the air and mix with rain or dew
to form acids. These acids can settle on a
vehicle's finish. As the water evaporates,
the acid becomes concentrated and can
damage the finish.
It is necessary to have your Mazda
washed and waxed to preserve its finish
according to the instructions in this
section. This should be done as soon as
possible.
And the longer the acid remains on the
surface, the greater the chance is for
damage.
Bird droppings can be removed with a
soft sponge and water. If you are traveling
and these are not available, a moistened
tissue may also take care of the problem.
The cleaned area should be waxed
according to the instructions in this
section.
Insects and tree sap are best removed with
a soft sponge and water or a commercially
available chemical cleaner.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you suspect that acid rain has settled on
your vehicle's finish.
Another method is to cover the affected
area with dampened newspaper for one to
two hours. After removing the newspaper,
rinse off the loosened debris with water.
8-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page319
Thursday, August 25 2005 4:59 PM
Black plate (319,1)
Maintenance and Care
Appearance Care
qWater Marks
NOTE
Occurrence
l
The paint chipping zone varies with
the speed of the vehicle. For
example, when traveling at 90 km/h
(56 mph), the paint chipping zone is
50 m (164 ft).
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these
minerals settles on the vehicle and
evaporates, the minerals will concentrate
and harden to form white rings. The rings
can damage your vehicle's finish.
l
l
In low temperatures a vehicle's finish
hardens. This increases the chance of
paint chipping.
Prevention
Chipped paint can lead to rust
forming on your Mazda. Before this
happens, repair the damage by using
Mazda touch-up paint according to
the instructions in this section.
Failure to repair the affected area
could lead to serious rusting and
expensive repairs.
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you find water marks on your vehicle's
finish.
qPaint Chipping
Occurrence
Paint chipping occurs when gravel thrown
in the air by another vehicle's tires hits
your vehicle.
How to avoid paint chipping
Keeping a safe distance between you and
the vehicle ahead reduces the chances of
having your paint chipped by flying
gravel.
8-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page320
Thursday, August 25 2005 4:59 PM
Black plate (320,1)
Maintenance and Care
Appearance Care
To minimize scratches on the vehicle's
paint finish:
Exterior Care
Follow all label and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
l
Rinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
l
Use plenty of lukewarm or cold water
qMaintaining the Finish
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
Washing
l
To help protect the finish from rust and
deterioration, wash your Mazda
Rub gently when washing or drying the
vehicle.
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
l
Take your vehicle only to a car wash
that keeps its brushes well maintained.
l
Don't use abrasive cleansers or wax
that contain abrasives.
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
CAUTION
Scratches occur on the paint surface
when:
Don't use steel wool, abrasive cleaners,
or strong detergents containing highly
alkaline or caustic agents on chrome-
plated or anodized aluminum parts.
This may damage the protective
l
The vehicle is washed without first
rinsing off dirt and other foreign
matter.
coating; also, cleaners and detergents
may discolor or deteriorate the paint.
l
The vehicle is washed with a rough,
dry, or dirty cloth.
l
The vehicle is washed at a car wash
that uses brushes that are dirty or too
stiff.
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
l
Cleansers or wax containing abrasives
are used.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
NOTE
l
Mazda is not responsible for
scratches caused by automatic car
washes or improper washing.
l
Scratches are more noticeable on
vehicles with darker paint finishes.
Thoroughly rinse off all soap with
lukewarm or cold water. Don't allow soap
to dry on the finish.
8-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page321
Thursday, August 25 2005 4:59 PM
Black plate (321,1)
Maintenance and Care
Appearance Care
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
qRepairing Damage to the Finish
Deep scratches or chips on the finish
should be repaired promptly. Exposed
metal quickly rusts and can lead to major
repairs.
WARNING
Driving with Wet Brakes:
CAUTION
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.
If your Mazda is damaged and needs
metal parts repaired or replaced, make
sure the body shop applies anti-
corrosion materials to all parts, both
repaired and new. This will prevent
them from rusting.
qBright-Metal Maintenance
l
Use tar remover to remove road tar and
insects. Never do this with a knife or
similar tool.
Waxing
Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.
l
To prevent corrosion on bright-metal
surfaces, apply wax or chrome
preservative and rub it to a high luster.
l
During cold weather or in coastal areas,
1. Use wax which contains no abrasives.
Waxes containing abrasive will remove
paint and could damage bright metal
parts.
cover bright-metal parts with a coating
of wax or preservative heavier than
usual. It would also help to coat them
with noncorrosive petroleum jelly or
some other protective compound.
2. Use a good grade of natural wax for
metallic, mica, and solid colors.
3. When waxing, coat evenly with the
sponge supplied or a soft cloth.
CAUTION
Don't use steel wool, abrasive cleaners,
or strong detergents containing highly
alkaline or caustic agents on chrome-
plated or anodized aluminum parts.
This may result in damage to the
protective coating and cause
4. Wipe off the wax with a soft cloth.
NOTE
A spot remover to remove oil, tar, and
similar materials will usually also take
off the wax. Rewax these areas even if
the rest of the vehicle doesn't need it.
discoloration or paint deterioration.
8-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page322
Thursday, August 25 2005 4:59 PM
Black plate (322,1)
Maintenance and Care
Appearance Care
qUnderbody Maintenance
qAluminum Wheel Maintenance
Road chemicals and salt used for ice and
snow removal and solvents used for dust
control may collect on the underbody. If
not removed, they will speed up rusting
and deterioration of such underbody parts
as fuel lines, frame, floor pan, and exhaust
system, even though these parts may be
coated with anti-corrosive material.
A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
NOTE
l
Don't use a wire brush or any
abrasive cleaner, polishing
compound, or solvent on aluminum
wheels. They may damage the
coating.
Thoroughly flush the underbody and
wheel housings with lukewarm or cold
water at the end of each winter. Try also
to do this every month.
l
Only use a mild soap or neutral
detergent and always use a sponge or
soft cloth to clean the wheels.
Rinse thoroughly with lukewarm or
cold water. Also, be sure to clean the
wheels after driving on dusty or
salted roads. This helps prevent
corrosion.
Pay special attention to these areas
because they easily hide mud and dirt. It
will do more harm than good to wet
down the road grime without removing
it.
l
Avoid washing your vehicle in an
automatic car wash that uses high-
speed or hard brushes.
The lower edges of doors, rocker panels,
and frame members have drain holes that
should not be clogged. Water trapped
there will cause rusting.
l
If your aluminum wheels lose luster,
wax the wheels.
WARNING
Driving with Wet Brakes:
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.
8-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page323
Thursday, August 25 2005 4:59 PM
Black plate (323,1)
Maintenance and Care
Appearance Care
Fabricí
Interior Care
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
qDashboard Precautions
Prevent caustic solutions such as perfume
and cosmetic oils from contacting the
dashboard. They'll damage and discolor it.
If these solutions get on the dashboard,
wipe them off immediately.
To keep the fabric looking clean and
fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
CAUTION
Do not use glazing agents.
Glazing agents contain ingredients
which may cause discoloration,
wrinkling, cracks and peeling.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
qCleaning the Upholstery and
Interior Trim
Suede-like materialí
Vinyl
Stains which are not treated immediately
will be difficult to remove later, and may
cause fading or discoloration.
Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl with a leather-and-vinyl
cleaner.
Remove stains as soon as possible.
Leatherí
To clean, wipe with a soft, damp cloth.
Then buff with a soft, dry cloth.
Real leather isn't uniform and may have
scars, scratches, and wrinkles. Clean it
with a leather cleaner or mild soap.
If the leather gets wet from rain, remove
the moisture as soon as possible and dry
in a shaded area.
If stains cannot be removed, using plain
water, try wiping with soapy water or a
mild detergent.
If the seats get wet, promptly remove
moisture with a dry cloth and allow it to
further dry in a shaded area.
If moisture is not removed, it will cause
hardening and shrinkage of the leather.
Do not leave vinyl products on the seats
for long periods as they may affect the
leather quality and coloring.
CAUTION
Don't clean the suede with leather
cleaner, a detergent, or soap. It will
cause discoloration.
To dry away any water, wipe with a soft,
dry cloth.
íSome models.
8-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page324
Thursday, August 25 2005 4:59 PM
Black plate (324,1)
Maintenance and Care
Appearance Care
CAUTION
WARNING
Sharp or pointed metal objects can
damage the suede beyond repair.
Damaged Seat Belt:
Using damaged seat belts is
dangerous. In a collision, damaged
belts cannot provide adequate
protection. Have an Authorized Mazda
Dealer replace damaged belts
immediately.
Piano black panel
The following parts are fitted with panels
that have been treated with a special
coating that resists scratching.
l
Center panel
qCleaning the Window Interiors
l
Door switch panel
If the windows become covered with an
oily, greasy, or waxy film, clean them
with glass cleaner. Follow the directions
on the container.
When the panel needs to be cleaned, use a
soft cloth to wipe off dirt from the surface.
NOTE
Scratches or nicks on the panels
resulting from the use of a hard brush or
cloth may not be repairable.
CAUTION
l
Don't scrape or scratch the inside of
the rear window. You may damage
the rear window defroster grid.
qCleaning the Lap/Shoulder Belt
l
When washing the inside rear
Webbing
window, use a soft cloth dampened
in lukewarm water, gently wiping
the antenna lines.
Use of glass cleaning products could
damage the antenna.
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.
8-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page325
Thursday, August 25 2005 4:59 PM
Black plate (325,1)
Customer Information and Reporting
Safety Defects
9
Important consumer information including warranties and add-on equipment.
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page326
Thursday, August 25 2005 4:59 PM
Black plate (326,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (U.S.A.)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2: Contact Mazda North American Operations
If for any reason you feel the need for further assistance after contacting your dealership
management, you can reach Mazda North American Operations by one of the following
ways.
Log on: at www.mazdaUSA.com
Answers to many questions, including how to locate or contact a local Mazda dealership in
the U.S., can be found here.
E-mail: click on “Contact Us” at the bottom of the page at www.mazdaUSA.com
By phone at: 1 (800) 222-5500
By letter at:
Attn: Customer Assistance
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
2. Year and model of vehicle
9-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page327
Thursday, August 25 2005 4:59 PM
Black plate (327,1)
Customer Information and Reporting Safety Defects
Customer Assistance
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
If you live outside the U.S.A., please contact your nearest Mazda Distributor.
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page328
Thursday, August 25 2005 4:59 PM
Black plate (328,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Canada)
qSatisfaction Review Process
Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized
Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In
our experience, any questions, problems, or complaints regarding the operation of your
Mazda or any other general service transactions are most effectively resolved by your
dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal
dealership procedures, we recommend that you take the following steps:
qSTEP 1: Contact the Mazda Dealer
Discuss the matter with a member of dealership management. If the Service Manager has
already reviewed your concerns, contact the owner of the dealership or its General
Manager.
qSTEP 2: Contact the Mazda Regional Office
If you feel that you still require assistance, ask the dealer Service Manager to arrange for
you to meet the local Mazda Service Representative. If more expedient, contact Mazda
Canada Inc.Regional Office nearest you for such arrangements. Regional Office address
and phone numbers are shown (page 9-6).
qSTEP 3: Contact the Mazda Customer Relations Department
If still not substantially satisfied, contact the Customer Relations Department, Mazda
Canada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)
263-4680.
Provide the Department with the following information:
1. Your name, address and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” page
of section 10 of this manual for the location of the VIN.
4. Purchase date
5. Present odometer reading
6. Your dealer's name and location
7. The nature of your problem and/or cause of dissatisfaction
The Department, in cooperation with the local Mazda Service Representative, will review
the case to determine if everything possible has been done to ensure your satisfaction.
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page329
Thursday, August 25 2005 4:59 PM
Black plate (329,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Please recognize that the resolution of service problems in most cases requires the use of
your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the
above three steps in sequence for most effective results.
qMediation/Arbitration Program
Occasionally a customer concern cannot be resolved through Mazda's Customer
Satisfaction Program. If after exhausting the procedures in this manual your concern is still
not resolved, you have another option.
Mazda Canada Inc. participates in an arbitration program administered by the
Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about
how your concern may be reviewed and resolved by an independent third party through
binding arbitration.
Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.
Mazda's participation in CAMVAP makes a valuable contribution to our achieving that
goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the
award is binding on both you and Mazda Canada Inc.
qCanadian Motor Vehicle Arbitration Plan (CAMVAP)
If a specific item of concern arises, where a solution cannot be reached between an owner,
Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wish
to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling
and preparing for their arbitration hearings. However, before you can proceed with
CAMVAP you must follow your Mazda dispute resolution process as outlined previously.
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page330
Thursday, August 25 2005 4:59 PM
Black plate (330,1)
Customer Information and Reporting Safety Defects
Customer Assistance
CAMVAP is fully implemented in all provinces and territories.
Consumers wishing to obtain further information about the Program should contact the
Provincial Administrator at 1 (800) 207-0685, or by contacting the
Canadian Motor Vehicle Arbitration Plan Office at:
Canadian Motor Vehicle Arbitration Plan
235 Yorkland Boulevard, suite 300
North York, Ontario
M2J 4Y8
http://camvap.ca
Provincial Administrators may be reached locally as listed below:
Province/Territory
British Columbia & Yukon Territories
Alberta & Northwest Territories
Saskatchewan
CAMVAP Number
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
Manitoba
Ontario
Atlantic Canada
Quebec
qRegional Offices
REGIONAL OFFICES
AREAS COVERED
MAZDA CANADA INC.
WESTERN REGION
8171 ACKROYD ROAD
SUITE 2000
ALBERTA,
BRITISH COLUMBIA,
MANITOBA,
RICHMOND B.C.
V6X 3K1
SASKATCHEWAN,
YUKON
(604) 303-5670
MAZDA CANADA INC.
CENTRAL/ATLANTIC REGION
55 VOGELL ROAD,
ONTARIO
RICHMOND HILL,
ONTARIO, L4B 3K5
(905) 787-7000
MAZDA CANADA INC.
QUEBEC REGION
6111 ROUTE TRANS
CANADIENNE
QUEBEC,
NEW BRUNSWICK,
NOVA SCOTIA,
POINTE CLAIRE, QUEBEC
H9R 5A5
PRINCE EDWARD ISLAND,
NEWFOUNDLAND
(514) 694-6390
9-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page331
Thursday, August 25 2005 4:59 PM
Black plate (331,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Puerto Rico)
Your complete and permanent satisfaction is our business. That is why all Authorized
Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top
condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2
If, after following STEP 1, you feel the need for further assistance, please contact your
area's Mazda representative (Indicated on the next page).
Please help us by providing the following information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
9-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page332
Thursday, August 25 2005 4:59 PM
Black plate (332,1)
Customer Information and Reporting Safety Defects
Mazda Importer/Distributors
Importer/Distributor
Distributor in Each Area
qU.S.A.
qCANADA
Mazda North American Operations
7755 Irvine Center Drive
Mazda Canada Inc.
55 Vogell Road, Richmond Hill,
Irvine, CA 92618-2922 U.S.A.
P.O. Box 19734
Irvine, CA 92623-9734 U.S.A.
TEL: 1 (800) 222-5500 (in U.S.A.)
(949) 727-1990 (outside U.S.A.)
Ontario, L4B 3K5 Canada
TEL: 1 (800) 263-4680 (in Canada)
(905) 787-7000 (outside Canada)
q
PUERTO RICO/U.S. Virgin Island
Plaza Motors Corp. (Mazda de Puerto
Rico)
P.O. Box 362722, San Juan, Puerto Rico
00936-2722
TEL: (787) 641-9300
qGUAM
Triple J Motors
157 South Marine Drive, Tamuning,
GUAM 96911 USA
P.O. Box 6066 Tamuning, Guam 96931
TEL: (671) 649-6555
qSAIPAN
Pacific International Marianas, Inc.
(d.b.a. Midway Motors)
P.O. Box 887 Saipan, MP 96950
TEL: (670) 234-7524
Triple J Saipan, Inc.
(d.b.a. Triple J Motors)
P.O. Box 500487 Saipan, MP 96950-0487
TEL: (670) 234-7133/3051
qAMERICAN SAMOA
Polynesia Motors, Inc.
P.O. Box 1120, Pago Pago, American
Samoa 96799
TEL: (684) 699-9347
9-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page333
Thursday, August 25 2005 4:59 PM
Black plate (333,1)
Customer Information and Reporting Safety Defects
Warranty
Warranties for Your Mazda
l
l
l
l
l
New Vehicle Limited Warranty
Distributor Major Component Limited Warranty (Canada only)
Safety Restraint System Limited Warranty
Anti-perforation Limited Warranty
Federal Emission Control Warranty (U.S.A. only)
l
Emission Defect Warranty
Emission Performance Warranty
l
l
l
l
l
California Emission Control Warranty (U.S.A. only)
Emission Control Warranty (Canada only)
Replacement Parts and Accessories Limited Warranty
Tire Warranty
NOTE
Detailed warranty information is provided with your Mazda.
9-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page334
Thursday, August 25 2005 5:0 PM
Black plate (334,1)
Customer Information and Reporting Safety Defects
Warranty
Outside the United States
Government regulations in the United States require that automobiles meet specific
emission regulations and safety standards. Therefore, vehicles built for use in the United
States may differ from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside the United States. However, in the event that you are moving to Canada
permanently, Mazda vehicles built for use in the United States could be eligible for
exportation to Canada with specific vehicle modifications to comply with the Canadian
Motor Vehicle Safety requirements (CMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to
travelers on vacation.
You may have the following problems if you do take your vehicle outside of the United
States:
l
Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l
Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page335
Thursday, August 25 2005 5:0 PM
Black plate (335,1)
Customer Information and Reporting Safety Defects
Warranty
Outside Canada
Government regulations in Canada require that automobiles meet specific emission
regulations and safety regulations. Therefore, vehicles built for use in Canada may differ
from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside Canada. However, in the event that you are moving to the United States
permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the
United States with specific vehicle modifications to comply with the United States Federal
Motor Vehicle Safety Standards (FMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to
travelers on vacation.
You may have the following problems if you do take your vehicle outside of Canada:
l
Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l
Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page336
Thursday, August 25 2005 5:0 PM
Black plate (336,1)
Customer Information and Reporting Safety Defects
Warranty
Registering Your Vehicle in A Foreign Country (Except
United States and Canada)
Government regulations in your country could require that automobiles meet specific
emission and safety standards.
Vehicles built for your country may differ from those built for other countries. In addition
to registration problems, satisfactory service may be difficult or even impossible in another
country.
The fuel specified for your vehicle may be unavailable.
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be
unavailable.
There might not be an Authorized Mazda Dealer in the country you plan to take your
vehicle.
The Mazda warranty is valid only in certain countries.
9-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page337
Thursday, August 25 2005 5:0 PM
Black plate (337,1)
Customer Information and Reporting Safety Defects
Warranty
Add-On Non-Genuine Parts and Accessories
Non-genuine parts and accessories for Mazda vehicles can be found in stores.
These may fit your vehicle, but they are not approved by Mazda for use with Mazda
vehicles. When you install non-genuine parts or accessories, they could affect your
vehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before you
install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.
WARNING
Installation of Non-Genuine Parts or Accessories:
Installation of non-genuine parts or accessories is dangerous. Improperly designed
parts or accessories could seriously affect your vehicle's performance or safety
systems. This could cause you to have an accident or increase your chances of injuries
in an accident. Always consult an Authorized Mazda Dealer before you install non-
genuine parts or accessories.
Add-On Electrical and Electronic Equipment:
Incorrectly choosing or installing improper add-on equipment or choosing an
improper installer is dangerous. Essential systems could be damaged, causing engine
stalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle.
Be very careful in choosing and installing add-on electrical equipment, such as mobile
telephones, two-way radios, stereo systems, and car alarm systems.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
9-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page338
Thursday, August 25 2005 5:0 PM
Black plate (338,1)
Customer Information and Reporting Safety Defects
Cell Phones
Cell Phones Warning
WARNING
Use of Cell Phones and Other Devices by Driver:
Use of any electrical devices such as cell phones, computers, portable radios, vehicle
navigation or other devices by the driver while the vehicle is moving is dangerous.
Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of
these devices will cause the driver to be distracted and could lead to a serious accident.
If a passenger is unable to use the device, pull off the right-of-way to a safe area
before use. If use of a cell phone is necessary despite this warning, use a hands-free
system to at least leave the hands free to drive the vehicle. Never use a cell phone or
other electrical devices while the vehicle is moving and, instead, concentrate on the
full-time job of driving.
Please comply with the legal regulations concerning the use of communication
equipment in vehicles in your country.
9-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page340
Thursday, August 25 2005 5:0 PM
Black plate (340,1)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
Uniform Tire Quality Grading System (UTQGS)
This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction, and
temperature performance.
qTread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire when tested
under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one-and-a-half times as well on the government
course as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm because of variations in driving habits, service
practices and differences in road characteristics and climate.
qTraction-AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent
the tire's ability to stop on wet pavement as measured under controlled conditions on
specified government test surfaces of asphalt and concrete. A tire marked C may have poor
traction performance.
WARNING
The traction grade assigned to this tire is based on braking (straight ahead) traction
tests and does not include acceleration cornering (turning), hydroplaning, or peak
traction characteristics.
qTemperature-A, B, C
The temperature grades A (the highest), B, and C, represent the tire's resistance to the
generation of heat and its ability to dissipate heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire
life, and excessive temperatures can lead to sudden tire failure.
Grade C corresponds to a level of performance which all passenger vehicle tires must meet
under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent
higher levels of performance on the laboratory test wheel than the minimum required by
law.
9-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page341
Thursday, August 25 2005 5:0 PM
Black plate (341,1)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
WARNING
The temperature grade for this tire is established for a tire that is properly inflated and
not overloaded. Excessive speed, underinflation, or excessive loading, either
separately or in combination, can cause heat buildup and possible tire failure.
These grades will be added to the sidewalls of passenger vehicle tires over the next several
years according to a schedule established by the NHTSA and the tire manufacturers.
The grade of tires available as standard or optional equipment on Mazda vehicles may vary
with respect to grade.
ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND
TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.
qUniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder
and maximum section width.
For example:
Treadwear 200 Traction AA Temperature A
UTQGS MARK (example)
TREADWEAR 200 TRACTION AA
TEMPERATURE A
9-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page342
Thursday, August 25 2005 5:0 PM
Black plate (342,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tires. This information identifies and describes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certification and in case of
a recall.
qInformation on Passenger Vehicle Tires
Please refer to the diagram below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Rim diameter code
7. Load index & speed symbol
8. Severe snow conditions
9. Tire ply composition and materials used
10. Max. load rating
9-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page343
Thursday, August 25 2005 5:0 PM
Black plate (343,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
11. Tread wear, traction and temperature grades
12. Max. permissible inflation pressure
13. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by either
ETRTO (European Tire and Rim Technical Organization) or JATMA (Japan Tire
Manufacturing Association).
215
“215” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
65
“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
R
“R” is the tire construction symbol. R indicates “Radial ply construction”.
15
“15” is the wheel rim diameter in inches.
95
“95” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
9-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page344
Thursday, August 25 2005 5:0 PM
Black plate (344,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
H
“H” is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
Speed Rating
99 mph
Q
R
S
106 mph
112 mph
118 mph
124 mph
130 mph
149 mph
168* mph
186* mph
T
U
H
V
W
Y
* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For
tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
M+S or M/S: Mud and Snow
AT: All Terrain.
AS: All Season. The “M+S” or “M/S” indicates that the tire has some functional use in
mud and snow.
U.S. DOT Tire Identification Number (TIN)
This begins with the letters “DOT” which indicates the tire meets all federal standards. The
next two numbers or letters are the plant code where it was manufactured, and the last four
numbers represent the week and year the tire was manufactured. For example, the numbers
457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,
the number 2102 means the 21th week of 2002. The other numbers are marketing codes
used at the manufacturer's discretion. This information is used to contact consumers if a tire
defect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire
manufacturers also must indicate the tire materials, which include steel, nylon, polyester,
and other.
Maximum Load Rating
This number indicates the maximum load in kilograms and pounds that can be carried by
the tire.
Maximum Permissible Inflation Pressure
This number is the greatest amount of air pressure that should ever be put in the tire under
normal driving conditions.
9-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page345
Thursday, August 25 2005 5:0 PM
Black plate (345,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tread Wear, Traction and Temperature Grades
Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the
government course as a tire graded 100.
Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades
represent the tire's ability to stop on wet pavement as measured under controlled conditions
on specified government test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.
Temperature: The temperature grades are A (the highest), B and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with very
deeply cut tread. These tires should only be used in pairs or placed on all four wheels.
Make sure you purchase snow tires that are the same size and construction type as the other
tires on your vehicle.
SAFETY WARNING
The following safety warning appears on the tire's sidewall.
SERIOUS INJURY MAY RESULT FROM:
l
EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-
MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)
TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT
TIRES.
l
TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-
FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLY
CHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.
9-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page346
Thursday, August 25 2005 5:0 PM
Black plate (346,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
qInformation on Temporary Tires
Please refer to the diagram below.
1. Temporary tires
2. Nominal width of tire in millimeters
3. Ratio of height to width (aspect ratio)
4. Diagonal
5. Rim diameter code
T115/70D 16 is an example of a tire size and load index rating. Here is an explanation of
the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
T
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
115
“115” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
70
“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
9-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page347
Thursday, August 25 2005 5:0 PM
Black plate (347,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
D
“D” is the tire construction symbol. D indicates “diagonal ply construction”.
16
“16” is the wheel rim diameter in inches.
9-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page348
Thursday, August 25 2005 5:0 PM
Black plate (348,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Location of the Tire Label (Placard)
You will find the tire label containing tire inflation pressure by tire size and other important
information on the driver's side B-pillar or on the edge of the rear door on the driver's side.
SAMPLE
qRecommended Tire Inflation Pressure
On the tire label you will find the recommended tire inflation pressure in both kPa and psi
for the tires installed as original equipment on the vehicle. It is very important that the
inflation pressure of the tires on your vehicle is maintained at the recommended pressure.
You should check the tire pressure regularly to insure that the proper inflation pressure is
maintained.
Refer to Tires on page 10-6.
NOTE
Tire pressures listed on the vehicle placard or tire information label indicate the
recommended cold tire inflation pressure, measured when the tires are cold, after the
vehicle has been parked for at least 3 hours. As you drive, the temperature in the tire
warms up, increasing the tire pressure.
9-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page349
Thursday, August 25 2005 5:0 PM
Black plate (349,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
WARNING
Tire Under-Inflation:
Driving your vehicle with under-inflated tires is dangerous.
Under-inflation is the most common cause of failures in any kind of tire and may
result in severe cracking, tread separation or “blowout”, with unexpected loss of
vehicle control and increased risk of injury. Under-inflation increases sidewall flexing
and rolling resistance, resulting in heat buildup and internal damage to the tire. It
results in unnecessary tire stress, irregular wear, loss of control and accidents. A tire
can lose up to half of its air pressure and not appear to be flat!
It is impossible to determine whether or not tires are properly inflated just by looking
at them.
Always check the tire inflation pressures on a regular basis according to the
recommended tire inflation pressure on the tire label and in conjunction with the
information in this owner's manual.
qChecking Tire Pressure
1. When you check the air pressure, make sure the tires are cold ―meaning they are not
hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of the
valve. Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded that
could poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other
irregularities.
9-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page350
Thursday, August 25 2005 5:0 PM
Black plate (350,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
NOTE
Warm tires normally exceed recommended pressures. Don't release air from warm tires
to adjust the pressure.
Under-inflation can cause serious failures and accidents.
Over-inflation can produce a harsh ride and the greater possibility of damage from road
hazards.
qGlossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and
the maximum weight the vehicle can carry.
Tire Identification Number (TIN): A number on the sidewall of each tire providing
information about the tire brand and manufacturing plant, tire size, and date of
manufacture.
Inflation Pressure: A measure of the amount of air in a tire.
kPa: Kilopascal, the metric unit for air pressure.
psi: Pounds per square inch, the English unit for air pressure.
B-pillar: The structural member at the side of the vehicle behind the front door.
Original Equipment (OE): Describes components originally equipped on the vehicle.
Vehicle Load Limit: The maximum value of the combined weight of occupants and cargo.
Bead Area of the Tire: Area of the tire next to the rim.
Sidewall Area of the Tire: Area between the bead area and the tread.
Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it's
mounted on the vehicle.
Seating capacity means the total allowable number of vehicle occupants. Seating capacity
is described on the tire label.
Production options weight is the combined weight of installed regular production options
weighing over 2.3 kilograms in excess of the standard items which they replace, and not
previously considered in the curb weight or accessory weight, including heavy duty brakes,
ride levelers, roof rack, heavy duty battery, and special trim.
Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire
beads are seated.
9-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page351
Thursday, August 25 2005 5:0 PM
Black plate (351,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are
some important maintenance points:
qTire Inflation Pressure
Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain
recommended pressures for the best ride, top handling, and minimum tire wear. Use the
pressures specified on the vehicle tire information placard or tire label for optimum service.
qTire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular
wear develops. During rotation, inspect them for correct balance.
Forward
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a
combination of the following:
l
Incorrect tire pressure
l
Improper wheel alignment
l
Out-of-balance wheel
l
Severe braking
for tightness.
9-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page352
Thursday, August 25 2005 5:0 PM
Black plate (352,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
CAUTION
Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or
studs only from front to rear, not from side to side. Tire performance will be weakened if
rotated from side to side.
(With limited-slip differential)
Don't use the following:
l
Tires not of the designated size
l
Tires of different sizes or types at the same time
l
Tires not sufficiently inflated
If these instructions aren't followed, the rotation of the left and right wheels will be
different and will thus apply a constant load on the limited-slip differential.
This will cause a malfunction.
qReplacing a Tire
WARNING
Worn Tires:
Driving with worn tires is dangerous. Reduced braking, steering, and traction could
result in an accident. Always use tires that are in good condition.
If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace
the tire when this happens.
Tread wear indicator
New tread
Worn tread
You should replace it before the band is across the entire tread.
9-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page353
Thursday, August 25 2005 5:0 PM
Black plate (353,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
NOTE
Tires degrade over time, even when they are not being used on the road. It is
recommended that tires generally be replaced when they are 6 years or older. Heat
caused by hot climates or frequent high loading conditions can accelerate the aging
process. You should replace the spare tire when you replace the other road tires due to
the aging of the spare tire. Regarding the manufacturing week and year is indicated with
4 digit. Refer to The tire labeling on page 9-18.
qSafety Practices
The way you drive has a great deal to do with your tire mileage and safety. So cultivate
good driving habits for your own benefit.
l
Observe posted speed limits
l
Avoid fast starts, stops and turns
l
Avoid potholes and objects on the road
l
Do no run over curbs or hit the tire against the curb when parking
CAUTION
If you feel a sudden vibration or ride disturbance while driving or you suspect your tire
or vehicle has been damaged, immediately reduce your speed. Drive with caution until
you can safely pull off the road. Stop and inspect the tire for damage. If the tire is under-
inflated or damaged, deflate it, remove the tire and rim and replace it with your spare
tire. If you cannot detect a cause, have the vehicle towed to the nearest vehicle or tire
dealer to have the vehicle inspected.
9-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page354
Thursday, August 25 2005 5:0 PM
Black plate (354,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Vehicle Loading
NOTE
This vehicle is not designed to tow a trailer.
This section will guide you in the proper loading of your vehicle and/or trailer, to keep
your loaded vehicle weight within its design rating capability, with or without a trailer.
Properly loading your vehicle will provide maximum return of vehicle design performance.
Before loading your vehicle, familiarize yourself with the following terms for determining
your vehicle's weight ratings, with or without a trailer, from the vehicle's Safety
Certification Label and Tire and Load Information Label:
WARNING
Overloaded Vehicle:
Overloading a vehicle is dangerous. The results of overloading can have serious
consequences in terms of passenger safety. Too much weight on a vehicle's suspension
system can cause spring or shock absorber failure, brake failure, handling or steering
problems, irregular tire wear, tire failure or other damage.
Overloading makes a vehicle harder to drive and control. It also increases the distance
required for stopping. In cases of serious overloading, brakes can fail completely,
particularly on steep grades. The load a tire will carry safely is a combination of the
size of the tire, its load range, and corresponding inflation pressure.
Never overload the vehicle and always observe the vehicle's weight ratings from the
vehicle's Safety Certification and Tire and Load Information labels.
Base Curb Weight is the weight of the vehicle including a full tank of fuel and all
standard equipment. It does not include passengers, cargo, or optional equipment.
9-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page355
Thursday, August 25 2005 5:0 PM
Black plate (355,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your
dealer plus any aftermarket equipment.
PAYLOAD
Payload is the combined weight of cargo and passengers that the vehicle is designed to
carry. The maximum payload for your vehicle can be found on the Tire and Load
Information label on the rear door on the driver's side or door pillar. Look for “THE
COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED
XXX kg or XXX lbs” for your maximum payload. The payload listed on the tire label is
the maximum payload for the vehicle as built by the assembly plant. If any aftermarket or
dealer installed equipment has been installed on the vehicle, the weight of the equipment
must be subtracted from the payload listed on the tire label in order to be accurate.
9-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page356
Thursday, August 25 2005 5:0 PM
Black plate (356,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
SAMPLE
CARGO
Cargo Weight includes all weight added to the Base Curb Weight, including cargo and
optional equipment. When towing, trailer tongue load or king pin weight is also part of
cargo weight.
The cargo weight limit decreases depending on the number of vehicle occupants. The cargo
weight limit can be calculated by subtracting the total weight of the vehicle occupants from
the “combined weight of occupants and cargo should never exceed” value on the tire label.
9-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page357
Thursday, August 25 2005 5:0 PM
Black plate (357,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Examples: Based on a single occupant weight of 68 kg, and a value of 385 kg for the
“combined weight of occupants and cargo should never exceed”:
_
_
The cargo weight limit with one occupant is 385 kg 68 kg = 317 kg
The cargo weight limit with two occupants is 385 kg (68 × 2) kg = 249 kg
If the weight of the occupant increases, the cargo weight limit decreases by that much.
GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) -
including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carried
by a single axle (front or rear). These numbers are shown on the Safety Compliance
Certification Label located on the rear door on the driver's side or door pillar. The
total load on each axle must never exceed its GAWR.
GVW
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight + cargo + passengers.
GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully
loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is
shown on the Safety Compliance Certification Label located on the rear door on the
driver's side or door pillar. The GVW must never exceed the GVWR.
9-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page358
Thursday, August 25 2005 5:0 PM
Black plate (358,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
SAMPLE
WARNING
Exceeding Axle Weight Rating Limits:
Exceeding the Safety Certification Label axle weight rating limits is dangerous and
could result in death or serious injury as a result of substandard vehicle handling,
performance, engine, transmission and/or structural damage, serious damage to the
vehicle, or loss of control.
Always keep the vehicle within the axle weight rating limits.
9-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page359
Thursday, August 25 2005 5:0 PM
Black plate (359,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
GCW
GCW (Gross Combined Weight) is the weight of the loaded vehicle (GVW) plus the
weight of the fully loaded trailer.
GCWR (Gross Combined Weight Rating) is the maximum allowable weight of the
vehicle and the loaded trailer - including all cargo and passengers - that the vehicle can
handle without risking damage. (Important: The towing vehicle's braking system is rated
for operation at GVWR, not at GCWR. Separate functional brakes should be used for safe
control of towed vehicles and for trailers weighing more than 1,500 lbs). The GCW must
never exceed the GCWR.
Maximum Loaded Trailer Weight is the highest possible weight of a fully loaded trailer
the vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal or
_
_
external), a tongue load of 10 15% (conventional trailer) or king pin weight of 15 25%
(fifth-wheel trailer), and driver only (150 lbs). Consult your dealership (or the RV and
Trailer Towing Guide provided by your dealership) for more detailed information.
Tongue Load or Fifth-Wheel King Pin Weight refers to the amount of the weight that a
trailer pushes down on a trailer hitch.
Examples: For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a
proper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by
0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.
9-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page360
Thursday, August 25 2005 5:0 PM
Black plate (360,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
WARNING
Exceeding GVWR or GAWR Specifications:
Exceeding the GVWR or the GAWR specified on the certification label is dangerous.
Exceeding any vehicle rating limitation could result in a serious accident, injury, or
damage to the vehicle.
Do not use replacement tires with lower load carrying capacities than the originals
because they may lower the vehicle's GVWR and GAWR limitations. Replacement
tires with a higher limit than the originals do not increase the GVWR and GAWR
limitations.
Never exceed the GVWR or the GAWR specified on the certification label.
9-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page361
Thursday, August 25 2005 5:0 PM
Black plate (361,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit:
(1) Locate the statement “The combined weight of occupants and cargo should never
exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be riding in your
vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity.
For example, if the “XXX” amount equals 1400 lbs. and there will be five 150 lb
passengers in your vehicle, the amount of available cargo and luggage load capacity is
_
650 lbs. (1400 750 (5 × 150) = 650 lbs.)
(5) Determine the combined weight of luggage and cargo being loaded on the vehicle.
That weight may not safely exceed the available cargo and luggage load capacity
calculated in Step 4.
(6) If your vehicle will be towing a trailer, the load from your trailer will be transferred to
your vehicle. Consult this manual to determine how this reduces the available cargo
and luggage load capacity of your vehicle.
9-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page362
Thursday, August 25 2005 5:0 PM
Black plate (362,1)
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway
Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor
Corporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if it
finds that a safety defect exists in a group of vehicles, it may order a recall and
remedy campaign. However, NHTSA cannot become involved in individual
problems between you, your dealer, or Mazda Motor Corporation (Your Mazda
Importer/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-
327-4236 (TTY: 1-800-424-9153) ; go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You
can also obtain other information about motor vehicle safety from http://
www.safercar.gov.
NOTE
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be
forwarded to:
Mazda North American Operations
7755 Irvine Center Drive
Irvine, California 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
Customer Assistance Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown
9-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page363
Thursday, August 25 2005 5:0 PM
Black plate (363,1)
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Reporting Safety Defects (Canada)
Canadian customers who wish to report a safety-related defect to Transport Canada, Defect
Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact
Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330
Sparks Street, Ottawa ON K1A 0N5.
For additional road safety information, please visit the Road Safety website at:
http://www.tc.gc.ca/roadsafety/menu.htm
9-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page364
Thursday, August 25 2005 5:0 PM
Black plate (364,1)
Customer Information and Reporting Safety Defects
Service Publications
Service Publications
Factory-authorized Mazda service publications are available for owners who wish to do
some of their own maintenance and repair.
When requesting any of our publications through an Authorized Mazda Dealer, refer to the
chart below.
If they don't have what you need in stock, they can order it for you.
PUBLICATION ORDER NUMBER
9999-95-064B-06
PUBLICATION DESCRIPTION
2006 WORKSHOP MANUAL (English)
2006 WIRING DIAGRAM (English)
2006 OWNER'S MANUAL
9999-95-040G-06
9999-95-079C-06
9999-EC-079C-06 (Canada only)
9999-PR-079C-06 (Puerto Rico only)
2006 OWNER'S MANUAL
2006 OWNER'S MANUAL
qWORKSHOP MANUAL:
Covers recommended maintenance and repair procedures of the drive train, body and
chassis.
qWIRING DIAGRAM:
Provides electrical schematics as well as component location for the entire electrical
system.
qOWNER'S MANUAL:
This booklet contains information regarding the proper care and operation of your vehicle.
This is not a technician's manual.
9-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page366
Thursday, August 25 2005 5:0 PM
Black plate (366,1)
Identification Numbers
qChassis Number
Vehicle Information Labels
qVehicle Identification Number
The vehicle identification number legally
identifies your vehicle. The number is on
a plate attached to the left top side of the
dashboard. This plate can easily be seen
through the windshield.
qVehicle Emission Control
Information Label
q
Motor Vehicle Safety Standard Label
qTire Pressure Label
10-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page367
Thursday, August 25 2005 5:0 PM
Black plate (367,1)
Identification Numbers
qEngine Number
Forward
10-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page368
Thursday, August 25 2005 5:0 PM
Black plate (368,1)
Specifications
Specifications
qEngine
Item
Type
Model
Rotary engine
Displacement
Compression ratio
654 ml × 2 (654 cc × 2, 40.0 cu in × 2)
10.0
qElectrical System
Item
Classification
12V-52AH/5HR
12 V - 100 A
Battery
Alternator
Starter
12 V - 2.0 kW
Trailing side
Spark-plug number
N3Y1 18 110, N3H1 18 110C*1*2
Leading side
N3Y8 18 110, N3Y9 18 110, N3H5 18 110*1*2
Spark-plug gap
1.15―1.25 mm (0.046―0.049 in)
*1 Standard
*2 ex factory
CAUTION
When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on
the iridium alloy and platinum tips could be damaged.
qLubricant Quality
Lubricant
Classification
Refer to the recommended SAE viscosity numbers on page 8-12.
API Service GL-4 (SAE 75W-90)
JWS3309
Engine oil
Manual transmission oil
Automatic transmission fluid
API Service GL-5 (SAE 90)
Rear differential oil
API Service GL-5 (SAE 80W-90)
API Service GL-5 (SAE 75W-90)*
SAE J1703 or FMVSS116 DOT-3
Brake/Clutch fluid
* Not available from Mazda
10-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page369
Thursday, August 25 2005 5:0 PM
Black plate (369,1)
Specifications
qCapacities
(Approximate Quantities)
Unit
US qt
Item
L
3.5
3.3
9.8
1.75
7.9
1.3
60
Imp qt
With oil filter replacement
3.7
3.5
3.1
Engine oil
Coolant
Without oil filter replacement
2.9
10.4
8.6
1.54
Manual transmission oil
Automatic transmission fluid
Rear differential oil
Fuel tank
1.85
8.4
7.0
1.4
1.1
15.9 (US gal)
13.2 (Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
qDimensions
Item
Overall length
Overall width
Overall height
Front tread
Model
4,425 mm (174.2 in), 4,430 mm*(174.4 in)
1,770 mm (69.7 in)
1,340 mm (52.8 in)
1,500 mm (59.1 in)
Rear tread
1,505 mm (59.3 in)
Wheelbase
2,700 mm (106.3 in)
* With license plate holder
qWeights
Weight
Item
Manual transmission
1,728 kg (3,810 lbs)
827 kg (1,823 lbs)
901 kg (1,986 lbs)
1,381 kg (3,045 lbs)
1,389 kg (3,062 lbs)
Automatic transmission
1,748 kg (3,854 lbs)
844 kg (1,861 lbs)
GVWR (Gross Vehicle Weight Rating)
Front
GAWR (Gross Axle Weight Rating)
Rear
907 kg (2,000 lbs)
U.S.A.
1,395 kg (3,075 lbs)
1,404 kg (3,095 lbs)
CW (Curb Weight)
Canada
qAir Conditioner
Gas complies with SAE J639
Maximum operating charge
0.42 kg (14.8 oz)
HFC134a (R-134a)
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page370
Thursday, August 25 2005 5:0 PM
Black plate (370,1)
Specifications
qLight Bulbs
Exterior light
Category
Light bulb
Wattage
65
ECE R
H9
SAE
―
High beam
Headlights
Low beam
Halogen
55
H7
―
Xenon fusion
35
D2S
―
Front turn signal lights
Parking lights
Fog lightsí
21
WY21W
W5W
H11
―
5
―
55
―
Front side-marker lights
High-mount brake light
Rear turn signal lights
Brake lights/Taillights
Reverse lights
3.8
21
―
#194
#7440
―
W21W
WY21W
W21/5W
W21W
W5W
―
21
21/5
21
#7443
#7440
―
License plate light
Rear side-marker lights
5
0.57
―
The rear side-marker light bulbs cannot be replaced because they are an LED-type bulb. The rear combination
component must be replaced.
Interior light
Category
Light bulb
Wattage
ECE R
W5W
W5W
―
Trunk light
5
5
Overhead light/Map lights (Front)
Overhead light (Rear)
Courtesy lights
10
5
W5W
―
Vanity mirror lights
2
qTires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type
originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.
10-6
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page371
Thursday, August 25 2005 5:0 PM
Black plate (371,1)
Specifications
Check the tire pressure label for tire size and inflation pressure.
Refer to Tire Inflation Pressure on page 8-27.
Inflation pressure
Tire size
Front
Rear
225/55R16 94V
220 kPa (32 psi)
225/45R18 91W
220 kPa (32 psi)
Vehicle capacity weight: 308 kg (680 lbs)
qFuses
Refer to the fuse rating on page 8-39.
10-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page372
Thursday, August 25 2005 5:0 PM
Black plate (372,1)
10-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page374
Thursday, August 25 2005 5:0 PM
Black plate (374,1)
Index
A
B
Battery
Beep Sounds
Brake/Clutch
Brakes
C
Automatic Transmission
11-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page375
Thursday, August 25 2005 5:0 PM
Black plate (375,1)
Index
C
E
Engine
Engine Coolant
Child Restraint
D
Defroster
F
Flasher
Fluids
11-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page376
Thursday, August 25 2005 5:0 PM
Black plate (376,1)
Index
F
I
Fuel
G
H
Headlights
J
K
I
Ignition
L
11-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page377
Thursday, August 25 2005 5:0 PM
Black plate (377,1)
Index
L
P
Light Bulbs
M
R
Maintenance
Mirrors
S
Seat Belt System
O
P
11-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page378
Thursday, August 25 2005 5:0 PM
Black plate (378,1)
Index
S
T
Seats
Tiedown
Security System
Tires
SRS Air Bags
Towing
T
V
11-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page379
Thursday, August 25 2005 5:0 PM
Black plate (379,1)
Index
V
W
Windows
11-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_8U58-EA-05J_Edition1 Page380
Thursday, August 25 2005 5:0 PM
Black plate (380,1)
11-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8U58-EA-05J
RX-8_NAVI_EA_Edition1.book Page 1 Friday, July 29, 2005 9:28 AM
NAVIGATION SYSTEM
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 2 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢂꢃꢅꢆꢇ ꢈꢈꢄꢅꢅꢁꢉꢊꢄꢅꢆꢇꢋꢂꢌꢇꢍꢋꢅꢄꢉ
ꢁꢂꢂꢃꢄꢄꢅꢆꢇꢃꢄ
ꢈꢃꢉꢄꢃꢊꢂꢅꢋꢌꢉꢂꢌꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊꢑꢉꢏꢐꢉꢊꢒꢃꢉꢈꢃꢆꢊꢇꢓꢊꢔꢅꢍꢊꢉꢆꢃꢊꢕꢇꢄꢄꢇꢋꢖꢊꢉꢋꢔꢊ
ꢅꢓꢊꢌꢎꢃꢊꢓꢅꢈꢈꢅꢗꢇꢋꢖꢊꢉꢂꢂꢃꢄꢄꢅꢆꢇꢃꢄꢘ
ꢀꢁꢂꢃꢄꢅ
ꢁꢄꢆꢇ ꢈ
ꢀꢁꢁꢂꢃ
ꢄꢅꢆꢇꢂ
ꢍꢄꢃ
●ꢑꢉꢙꢊꢒꢇꢄꢂ
ꢀꢁꢂꢃꢄꢅꢆꢇ
ꢃ ꢄꢈꢉꢊꢋꢅꢌꢂꢀꢃꢉꢄꢈꢉꢁꢉꢀꢍꢁꢈꢈꢉꢀꢉꢍꢁꢈꢎꢋꢉꢊꢋꢅꢌꢂꢀꢃꢏ
ꢅꢐꢎꢑꢎꢋꢉꢃ ꢄꢈꢉꢊꢋꢅꢌꢂꢀꢃꢉꢂꢈꢎꢈꢉꢁꢉꢑꢄꢈꢄꢒꢍꢎꢓ
ꢄꢆꢑꢄꢈꢄꢒꢍꢎꢉꢍꢁꢈꢎꢋꢉꢒꢎꢁꢔꢉꢐ ꢄꢀ ꢉꢀꢅꢂꢍꢌꢉꢀꢁꢂꢈꢎꢉ
ꢁꢕꢁꢋꢌꢅꢂꢈꢉꢋꢁꢌꢄꢁꢃꢄꢅꢆꢉꢎꢖꢊꢅꢈꢂꢋꢎꢉꢄꢗꢉꢌꢄꢋꢎꢀꢃꢎꢌꢏ
ꢒꢎꢉꢈꢂꢋꢎꢉꢃꢅꢉꢅꢊꢎꢋꢁꢃꢎꢉꢃ ꢄꢈꢉꢊꢋꢅꢌꢂꢀꢃꢉ
ꢀꢅꢋꢋꢎꢀꢃꢍꢘꢉꢁꢈꢉꢄꢆꢈꢃꢋꢂꢀꢃꢎꢌꢏ
ꢂꢈꢎꢉꢅꢗꢉꢀꢅꢆꢃꢋꢅꢍꢈꢉꢅꢋꢉꢁꢌꢙꢂꢈꢃꢔꢎꢆꢃꢈꢉꢅꢋꢉ
ꢊꢎꢋꢗꢅꢋꢔꢁꢆꢀꢎꢉꢅꢗꢉꢊꢋꢅꢀꢎꢌꢂꢋꢎꢈꢉꢅꢃ ꢎꢋꢉꢃ ꢁꢆꢉ
ꢃ ꢅꢈꢎꢉꢈꢊꢎꢀꢄꢗꢄꢎꢌꢉ ꢎꢋꢎꢄꢆꢉꢔꢁꢘꢉꢋꢎꢈꢂꢍꢃꢉꢄꢆꢉ
ꢁꢕꢁꢋꢌꢅꢂꢈꢉꢋꢁꢌꢄꢁꢃꢄꢅꢆꢉꢎꢖꢊꢅꢈꢂꢋꢎꢏꢉꢌꢅꢉꢆꢅꢃꢉ
ꢅꢊꢎꢆꢉꢀꢅꢑꢎꢋꢈꢉꢁꢆꢌꢉꢌꢅꢉꢆꢅꢃꢉꢋꢎꢊꢁꢄꢋꢉꢘꢅꢂꢋꢈꢎꢍꢗꢏꢉ
ꢋꢎꢗꢎꢋꢉꢈꢎꢋꢑꢄꢀꢄꢆꢚꢉꢃꢅꢉꢛꢂꢁꢍꢄꢗꢄꢎꢌꢉꢊꢎꢋꢈꢅꢆꢆꢎꢍꢏ
ꢀꢁꢂꢃꢄꢅꢆꢁ
ꢍꢄꢃ
ꢍꢜꢝ !ꢉ"!#$%&'ꢝꢇ
ꢚꢉꢛꢃꢊꢈꢃꢋꢖꢌꢎꢜꢊꢝ !ꢊꢋꢕ
"ꢉꢄꢃꢆꢊꢙꢅꢗꢃꢆꢜꢊ#ꢅꢊꢎꢉꢏꢉꢆꢐꢅꢍꢄꢊꢆꢉꢐꢇꢉꢌꢇꢅꢋꢊꢇꢄꢊꢃꢕꢇꢌꢌꢃꢐꢊꢗꢇꢌꢎꢊꢄꢉꢓꢃꢌꢔꢊꢙꢆꢅꢌꢃꢂꢌꢇꢅꢋꢘ
ꢄ(
ꢀꢁꢂꢁꢃꢃꢄꢅꢆ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 3 Friday, July 29, 2005 9:28 AM
ꢆꢅꢐꢍꢂꢌ
ꢁꢂꢂꢃꢄꢄꢅꢆꢇꢃꢄ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢀ
"ꢉꢄꢃꢆꢊ ꢆꢅꢐꢍꢂꢌ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢀ
%ꢅꢋꢌꢃꢋꢌꢄ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ$
&ꢉꢓꢃꢌꢔꢊ'ꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ(
'ꢋꢌꢆꢅꢐꢍꢂꢌꢇꢅꢋꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢝ
#ꢉꢕꢃꢄꢊꢉꢋꢐꢊ)ꢍꢋꢂꢌꢇꢅꢋꢄꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ*
ꢀꢁꢂꢃꢄꢁꢅꢆꢇꢁ
ꢁꢂꢌꢇꢛꢉꢌꢇꢅꢋ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ+!
&ꢂꢆꢃꢃꢋꢊꢋꢉꢕꢃꢄꢊꢉꢋꢐꢊꢓꢍꢋꢂꢌꢇꢅꢋꢄ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ+ꢀ
&ꢂꢆꢃꢃꢋꢊꢂꢎꢉꢋꢖꢃ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ+(
● %ꢎꢉꢋꢖꢇꢋꢖꢊꢌꢎꢃꢊꢑꢉꢙꢊ,ꢆꢇꢃꢋꢌꢉꢌꢇꢅꢋ-&ꢂꢉꢈꢃ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ +
ꢚ '')*+ꢉ
ꢝ'ꢜ!' $
ꢌ ꢝ')*ꢜ')#*ꢉꢎ*'!,ꢉꢜ*$ꢉꢋ#%' ꢉꢈ ꢜ!&-ꢘꢘꢘꢘꢘꢘꢘꢘ ./
● %ꢎꢉꢋꢖꢃꢊ.%ꢎꢉꢋꢖꢃꢊ&ꢃꢉꢆꢂꢎꢊꢁꢆꢃꢉ/ ● ꢁꢐꢐꢆꢃꢄꢄ
● ꢅꢇꢋꢌꢊꢅꢓꢊꢇꢋꢌꢃꢆꢃꢄꢌ
● ꢑꢃꢕꢅꢆꢔꢊ ꢅꢇꢋꢌ
● 0ꢕꢃꢆꢖꢃꢋꢂꢔ
● 1ꢅꢕꢃ
●
ꢆꢃꢄꢃꢌꢊꢒꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋ
●
ꢆꢃꢛꢇꢅꢍꢄꢊ
ꢒꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋ
● 'ꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋ
ꢎꢅꢋꢃꢊꢋꢍꢕ2ꢃꢆ
● &ꢃꢈꢃꢂꢌꢊꢓꢆꢅꢕꢊꢕꢉꢙ
● ꢀꢁꢂꢂꢃꢄꢅꢆꢇ ꢈꢇꢉꢉꢆꢊꢄꢋꢌ
● %ꢅꢅꢆꢐꢇꢋꢉꢌꢃꢄ
●
ꢋ#%')*+
ꢂꢝ ꢉꢊꢅꢄꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ 00
ꢀ-ꢜ!ꢜ&' !ꢉꢎ*'!, ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ 01
ꢌ)! &'ꢉꢌ ꢝ')*ꢜ')#*ꢉꢄ*"%'ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ 02
ꢊꢅꢄꢉꢄ&#*ꢝꢉ#*ꢉꢔꢜ"ꢝꢉꢓꢉꢌ 3 ' ꢉꢌ ꢝ')*ꢜ')#*ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ 04
ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢁꢈꢉ ꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢍꢊꢋ
ꢁ$$! ꢝꢝꢉ
ꢒ##5
ꢁꢐꢐꢆꢃꢄꢄꢊ3ꢅꢅ4 ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ$ꢀ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ
ꢈꢉꢅ ꢊꢋ
#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢃꢌꢊ5ꢙꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ$*
ꢆꢃꢂꢉꢍꢌꢇꢅꢋꢄ-&ꢔꢄꢌꢃꢕꢊ ꢃꢆꢓꢅꢆꢕꢉꢋꢂꢃ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ(ꢝ
● 6ꢅꢇꢂꢃꢊ7ꢍꢇꢐꢉꢋꢂꢃ
● ꢑꢉꢙꢊꢑꢉꢌꢂꢎꢇꢋꢖ
● 8ꢅꢍꢌꢃꢊ7ꢍꢇꢐꢃ
● 7 &
●
ꢅꢄꢇꢌꢇꢅꢋꢇꢋꢖꢊꢁꢂꢂꢍꢆꢉꢂꢔ
ꢀꢁꢂ
ꢃꢄꢅꢄꢁꢁꢆꢇ
● 8ꢅꢍꢌꢃꢊ&ꢃꢉꢆꢂꢎ
9ꢆꢅꢍ2ꢈꢃꢄꢎꢅꢅꢌꢇꢋꢖꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ ꢀ
● 6ꢃꢆꢇꢓꢇꢂꢉꢌꢇꢅꢋꢊ)ꢇꢆꢄꢌ
ꢑꢉꢇꢋꢌꢃꢋꢉꢋꢂꢃ ꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘꢘ $
● 0ꢆꢆꢅꢆꢊꢑꢃꢄꢄꢉꢖꢃꢄ
$
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 4 Friday, July 29, 2005 9:28 AM
&ꢉꢓꢃꢌꢔꢊ'ꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋ
■ 8ꢃꢉꢐꢊꢌꢎꢇꢄꢊꢅꢗꢋꢃꢆRꢄꢊꢕꢉꢋꢍꢉꢈꢊꢓꢅꢆꢊꢔꢅꢍꢆꢊ#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢔꢄꢌꢃꢕꢊꢂꢉꢆꢃꢓꢍꢈꢈꢔꢊ2ꢃꢓꢅꢆꢃꢊꢍꢄꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢘꢊ
9ꢎꢃꢔꢊꢂꢅꢋꢌꢉꢇꢋꢊꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢊꢉ2ꢅꢍꢌꢊꢎꢅꢗꢊꢌꢅꢊꢍꢄꢃꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢇꢋꢊꢉꢊꢄꢉꢓꢃꢊꢉꢋꢐꢊꢃꢓꢓꢃꢂꢌꢇꢛꢃꢊꢕꢉꢋꢋꢃꢆꢘꢊ
ꢑꢉꢏꢐꢉꢊꢉꢄꢄꢍꢕꢃꢄꢊꢋꢅꢊꢆꢃꢄꢙꢅꢋꢄꢇ2ꢇꢈꢇꢌꢔꢊꢓꢅꢆꢊꢉꢋꢔꢊꢙꢆꢅ2ꢈꢃꢕꢄꢊꢆꢃꢄꢍꢈꢌꢇꢋꢖꢊꢓꢆꢅꢕꢊꢓꢉꢇꢈꢍꢆꢃꢊꢌꢅꢊꢅ2ꢄꢃꢆꢛꢃꢊꢌꢎꢃꢊꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢊ
ꢖꢇꢛꢃꢋꢊꢇꢋꢊꢌꢎꢇꢄꢊꢕꢉꢋꢍꢉꢈꢘ
■ 9ꢎꢇꢄꢊꢕꢉꢋꢍꢉꢈꢊꢍꢄꢃꢄꢊꢙꢇꢂꢌꢅꢖꢆꢉꢙꢎꢄꢊꢌꢅꢊꢄꢎꢅꢗꢊꢔꢅꢍꢊꢎꢅꢗꢊꢌꢅꢊꢍꢄꢃꢊꢌꢎꢃꢊꢙꢆꢅꢐꢍꢂꢌꢊꢄꢉꢓꢃꢈꢔꢊꢉꢋꢐꢊꢌꢅꢊꢉꢈꢃꢆꢌꢊꢔꢅꢍꢊꢌꢅꢊꢙꢅꢌꢃꢋꢌꢇꢉꢈꢊ
ꢐꢉꢋꢖꢃꢆꢄꢊꢆꢃꢄꢍꢈꢌꢇꢋꢖꢊꢓꢆꢅꢕꢊꢇꢕꢙꢆꢅꢙꢃꢆꢊꢂꢅꢋꢋꢃꢂꢌꢇꢅꢋꢄꢊꢉꢋꢐꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢘꢊ9ꢎꢃꢊꢕꢃꢉꢋꢇꢋꢖꢄꢊꢅꢓꢊꢌꢎꢃꢊꢙꢇꢂꢌꢅꢖꢆꢉꢙꢎꢄꢊꢉꢆꢃꢊ
ꢃ;ꢙꢈꢉꢇꢋꢃꢐꢊ2ꢃꢈꢅꢗꢘꢊ'ꢌꢊꢇꢄꢊꢇꢕꢙꢅꢆꢌꢉꢋꢌꢊꢌꢎꢉꢌꢊꢔꢅꢍꢊꢓꢍꢈꢈꢔꢊꢍꢋꢐꢃꢆꢄꢌꢉꢋꢐꢊꢌꢎꢃꢊꢙꢇꢂꢌꢅꢖꢆꢉꢙꢎꢄꢊꢉꢋꢐꢊꢃ;ꢙꢈꢉꢋꢉꢌꢇꢅꢋꢄꢊꢇꢋꢊꢅꢆꢐꢃꢆꢊꢌꢅꢊ
ꢍꢄꢃꢊꢌꢎꢇꢄꢊꢕꢉꢋꢍꢉꢈꢊꢉꢋꢐꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢙꢆꢅꢙꢃꢆꢈꢔꢘ
9ꢎꢃꢊꢙꢆꢃꢄꢃꢋꢂꢃꢊꢅꢓꢊꢌꢎꢇꢄꢊꢚꢉꢆꢋꢇꢋꢖꢊꢄꢔꢕ2ꢅꢈꢊꢇꢋꢊꢌꢎꢃꢊꢌꢃ;ꢌꢊꢇꢄꢊꢇꢋꢌꢃꢋꢐꢃꢐꢊꢌꢅꢊ
ꢉꢈꢃꢆꢌꢊꢔꢅꢍꢊꢌꢅꢊꢌꢎꢃꢊꢇꢕꢙꢅꢆꢌꢉꢋꢂꢃꢊꢅꢓꢊꢎꢃꢃꢐꢇꢋꢖꢊꢌꢎꢃꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢊ
ꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢘꢊ)ꢉꢇꢈꢍꢆꢃꢊꢌꢅꢊꢎꢃꢃꢐꢊꢌꢎꢃꢊꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢊꢕꢉꢔꢊꢆꢃꢄꢍꢈꢌꢊꢇꢋꢊ
ꢄꢃꢛꢃꢆꢃꢊꢇꢋ<ꢍꢆꢔꢊꢅꢆꢊꢐꢃꢉꢌꢎꢘ
ꢐꢜ!*)*+
ꢀꢁꢂꢃꢄꢃꢅ
■ ꢌ#ꢉ*#'ꢉ5 "ꢉ,#%!ꢉ , ꢝꢉ()6 $ꢉ#*ꢉ'- ꢉ7#*)'#!ꢉꢝ&! *ꢉ#!ꢉ#" !ꢜ' ꢉ'- ꢉꢝ,ꢝ' 7ꢉ
8-)3 ꢉ$!)9)*+ꢏꢊ
ꢒꢅꢊꢋꢅꢌꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢄꢃꢌꢌꢇꢋꢖꢄꢊꢉꢋꢐꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢈꢅꢂꢉꢌꢇꢅꢋꢄꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊꢑꢇꢋꢇꢕꢇꢏꢃꢊꢌꢎꢃꢊꢌꢇꢕꢃꢊ
ꢄꢙꢃꢋꢌꢊꢅꢋꢊꢛꢇꢃꢗꢇꢋꢖꢊꢌꢎꢃꢊꢕꢅꢋꢇꢌꢅꢆꢊꢄꢂꢆꢃꢃꢋꢊꢉꢋꢐꢊꢈꢇꢄꢌꢃꢋꢇꢋꢖꢊꢌꢅꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊ
,ꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢗꢇꢈꢈꢊꢐꢇꢄꢌꢆꢉꢂꢌꢊꢌꢎꢃꢊꢐꢆꢇꢛꢃꢆꢊꢓꢆꢅꢕꢊꢈꢅꢅ4ꢇꢋꢖꢊꢉꢎꢃꢉꢐꢊꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢉꢋꢐꢊꢂꢉꢋꢊ
ꢂꢉꢍꢄꢃꢊꢉꢂꢂꢇꢐꢃꢋꢌꢄꢘꢊꢁꢈꢗꢉꢔꢄꢊꢄꢌꢅꢙꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢋꢊꢉꢊꢄꢉꢓꢃꢊꢈꢅꢂꢉꢌꢇꢅꢋꢊꢉꢋꢐꢊꢍꢄꢃꢊꢌꢎꢃꢊꢙꢉꢆ4ꢇꢋꢖꢊ2ꢆꢉ4ꢃꢊ
2ꢃꢓꢅꢆꢃꢊꢅꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢘ
ꢀꢁꢂꢃꢄꢃꢅꢆ
■ ꢁ38ꢜ,ꢝꢉ#: ,ꢉ3#&ꢜ3ꢉ'!ꢜ(()&ꢉ! +%3ꢜ')#*ꢝꢏꢉ
=ꢅꢍꢆꢊꢖꢍꢇꢐꢃꢐꢊꢆꢅꢍꢌꢃꢊꢕꢉꢔꢊꢇꢋꢂꢈꢍꢐꢃꢊꢆꢅꢉꢐꢄꢊꢌꢎꢉꢌꢊꢉꢆꢃꢊꢋꢅꢌꢊꢅꢙꢃꢋꢊꢌꢅꢊꢛꢃꢎꢇꢂꢈꢃꢄꢊꢅꢆꢊꢉꢆꢃꢊꢂꢈꢅꢄꢃꢐꢊꢐꢍꢃꢊꢌꢅꢊ
ꢌꢆꢉꢓꢓꢇꢂꢊꢆꢃꢖꢍꢈꢉꢌꢇꢅꢋꢄꢘꢊ%ꢅꢕꢙꢈꢔꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊꢈꢅꢂꢉꢈꢊꢌꢆꢉꢓꢓꢇꢂꢊꢆꢃꢖꢍꢈꢉꢌꢇꢅꢋꢄꢊꢉꢋꢐꢊꢌꢉ4ꢃꢊꢉꢋꢅꢌꢎꢃꢆꢊꢆꢅꢍꢌꢃꢘ
■ ꢌ#ꢉ*#'ꢉ%ꢝ ꢉ'- ꢉ%*)'ꢉ8- *ꢉ)'ꢉ)ꢝꢉ#%'ꢉ#(ꢉ#!$ !ꢏꢊ
'ꢓꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢇꢄꢊꢅꢍꢌꢊꢅꢓꢊꢅꢆꢐꢃꢆꢊ.ꢋꢅꢊꢇꢕꢉꢖꢃ>ꢊꢋꢅꢊꢄꢅꢍꢋꢐ/ꢊꢅꢆꢊꢇꢋꢊꢉꢋꢊꢉ2ꢋꢅꢆꢕꢉꢈꢊꢄꢌꢉꢌꢃꢊ.ꢎꢉꢄꢊꢓꢅꢆꢃꢇꢖꢋꢊꢕꢉꢌꢌꢃꢆꢊ
ꢇꢋꢊꢇꢌ>ꢊꢇꢄꢊꢃ;ꢙꢅꢄꢃꢐꢊꢌꢅꢊꢗꢉꢌꢃꢆ>ꢊꢇꢄꢊꢄꢕꢅ4ꢇꢋꢖ>ꢊꢅꢆꢊꢄꢕꢃꢈꢈꢄ/>ꢊꢌꢎꢃꢋꢊꢌꢍꢆꢋꢊꢇꢌꢊꢅꢓꢓꢊꢇꢕꢕꢃꢐꢇꢉꢌꢃꢈꢔꢊꢉꢋꢐꢊꢂꢅꢋꢄꢍꢈꢌꢊ
ꢗꢇꢌꢎꢊꢉꢋꢊ0;ꢙꢃꢆꢌꢊꢆꢃꢙꢉꢇꢆꢃꢆ>ꢊꢗꢃꢊꢆꢃꢂꢅꢕꢕꢃꢋꢐꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊꢑꢉꢏꢐꢉꢊ8ꢃꢙꢉꢇꢆꢃꢆꢘꢊ5ꢄꢇꢋꢖꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢇꢋꢊ
ꢉꢋꢊꢅꢍꢌ?ꢅꢓ?ꢅꢆꢐꢃꢆꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢊꢕꢉꢔꢊꢈꢃꢉꢐꢊꢌꢅꢊꢉꢂꢂꢇꢐꢃꢋꢌꢄ>ꢊꢓꢇꢆꢃꢄ>ꢊꢅꢆꢊꢃꢈꢃꢂꢌꢆꢇꢂꢊꢄꢎꢅꢂ4ꢄꢘ
■ ꢂꢝ ꢉ'- ꢉ"!#" !ꢉ"#8 !ꢉꢝ%""3,ꢏꢉ
9ꢎꢇꢄꢊꢙꢆꢅꢐꢍꢂꢌꢊꢇꢄꢊꢐꢃꢄꢇꢖꢋꢃꢐꢊꢓꢅꢆꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢊꢗꢇꢌꢎꢊꢉꢊꢋꢃꢖꢉꢌꢇꢛꢃꢊꢖꢆꢅꢍꢋꢐꢃꢐꢊ+ꢀꢊ6ꢊꢒ%ꢊ2ꢉꢌꢌꢃꢆꢔꢊꢄꢔꢄꢌꢃꢕꢘ
■ ꢌ#ꢉ*#'ꢉ$)ꢝꢜꢝꢝ 7:3 ꢏꢉ
ꢒꢅꢊꢋꢅꢌꢊꢐꢇꢄꢉꢄꢄꢃꢕ2ꢈꢃꢊꢌꢎꢃꢊꢙꢆꢅꢐꢍꢂꢌꢊꢅꢆꢊꢉꢌꢌꢃꢕꢙꢌꢊꢌꢅꢊꢆꢃꢙꢉꢇꢆꢊꢇꢌꢊꢔꢅꢍꢆꢄꢃꢈꢓꢘꢊ'ꢓꢊꢌꢎꢃꢊꢙꢆꢅꢐꢍꢂꢌꢊꢋꢃꢃꢐꢄꢊꢌꢅꢊ2ꢃꢊ
ꢆꢃꢙꢉꢇꢆꢃꢐ>ꢊꢌꢉ4ꢃꢊꢇꢌꢊꢌꢅꢊꢉꢋꢊ0;ꢙꢃꢆꢌꢊꢆꢃꢙꢉꢇꢆꢃꢆ>ꢊꢗꢃꢊꢆꢃꢂꢅꢕꢕꢃꢋꢐꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊꢑꢉꢏꢐꢉꢊ8ꢃꢙꢉꢇꢆꢃꢆꢘ
(
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 5 Friday, July 29, 2005 9:28 AM
9ꢎꢃꢊꢙꢆꢃꢄꢃꢋꢂꢃꢊꢅꢓꢊꢌꢎꢇꢄꢊ%ꢉꢍꢌꢇꢅꢋꢊꢄꢔꢕ2ꢅꢈꢊꢇꢋꢊꢌꢎꢃꢊꢌꢃ;ꢌꢊꢇꢄꢊꢇꢋꢌꢃꢋꢐꢃꢐꢊꢌꢅꢊ
ꢉꢈꢃꢆꢌꢊꢔꢅꢍꢊꢌꢅꢊꢌꢎꢃꢊꢇꢕꢙꢅꢆꢌꢉꢋꢂꢃꢊꢅꢓꢊꢎꢃꢃꢐꢇꢋꢖꢊꢌꢎꢃꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢊ
ꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢘꢊ)ꢉꢇꢈꢍꢆꢃꢊꢌꢅꢊꢎꢃꢃꢐꢊꢌꢎꢃꢊꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢊꢕꢉꢔꢊꢆꢃꢄꢍꢈꢌꢊꢇꢋꢊꢇꢋ<ꢍꢆꢔꢊ
ꢅꢆꢊꢕꢉꢌꢃꢆꢇꢉꢈꢊꢐꢉꢕꢉꢖꢃꢘ
ꢀꢜ%')#*
ꢆꢁꢇ ꢄꢈꢃ
■ ꢌ#ꢉ*#'ꢉ%ꢝ ꢉ'- ꢉ"!#$%&'ꢉ8- ! ꢉ)'ꢉ)ꢝꢉ 6"#ꢝ $ꢉ'#ꢉ8ꢜ' !;ꢉ7#)ꢝ'%! ;ꢉ#!ꢉ$%ꢝ'ꢏꢉ
0;ꢙꢅꢄꢍꢆꢃꢊꢌꢅꢊꢗꢉꢌꢃꢆ>ꢊꢕꢅꢇꢄꢌꢍꢆꢃ>ꢊꢅꢆꢊꢐꢍꢄꢌꢊꢕꢉꢔꢊꢈꢃꢉꢐꢊꢌꢅꢊꢄꢕꢅ4ꢃ>ꢊꢓꢇꢆꢃ>ꢊꢅꢆꢊꢅꢌꢎꢃꢆꢊꢐꢉꢕꢉꢖꢃꢊꢌꢅꢊꢌꢎꢃꢊꢍꢋꢇꢌꢘꢊ
ꢑꢉ4ꢃꢊꢃꢄꢙꢃꢂꢇꢉꢈꢈꢔꢊꢄꢍꢆꢃꢊꢌꢎꢉꢌꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢐꢅꢃꢄꢊꢋꢅꢌꢊꢖꢃꢌꢊꢗꢃꢌꢊꢇꢋꢊꢂꢉꢆꢊꢗꢉꢄꢎꢃꢄꢊꢅꢆꢊꢅꢋꢊꢆꢉꢇꢋꢔꢊꢐꢉꢔꢄꢘ
ꢇꢁ ꢈꢄꢉꢃꢆ
■ < "ꢉ'- ꢉ9#)& ꢉ+%)$ꢜ*& ꢉ9#3%7 ꢉꢜ'ꢉꢜ*ꢉꢜ""!#"!)ꢜ' ꢉ3 9 3ꢏꢉ
Aꢃꢃꢙꢊꢌꢎꢃꢊꢛꢅꢈꢍꢕꢃꢊꢈꢃꢛꢃꢈꢊꢈꢅꢗꢊꢃꢋꢅꢍꢖꢎꢊꢌꢅꢊ2ꢃꢊꢉꢗꢉꢆꢃꢊꢅꢓꢊꢆꢅꢉꢐꢊꢉꢋꢐꢊꢌꢆꢉꢓꢓꢇꢂꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢄꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘ
■ ꢊ!#' &'ꢉ'- ꢉꢌ &5ꢉꢔ &-ꢜ*)ꢝ7ꢏꢊ
ꢒꢅꢊꢋꢅꢌꢊꢇꢋꢄꢃꢆꢌꢊꢉꢋꢔꢊꢓꢅꢆꢃꢇꢖꢋꢊꢅ2<ꢃꢂꢌꢄꢊꢇꢋꢌꢅꢊꢌꢎꢃꢊꢄꢈꢅꢌꢊꢅꢓꢊꢌꢎꢇꢄꢊꢍꢋꢇꢌꢘ
■ ꢃ-)ꢝꢉ*ꢜ9)+ꢜ')#*ꢉꢝ,ꢝ' 7ꢉ)ꢝꢉ$ ꢝ)+* $ꢉ%ꢝ ꢉ(#!ꢉ 6&3%ꢝ)9 3,ꢉ)*ꢉꢜ%'#7#:)3 ꢝꢏꢊ
9ꢎꢇꢄꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊꢄꢎꢅꢍꢈꢐꢊꢅꢋꢈꢔꢊ2ꢃꢊꢇꢋꢄꢌꢉꢈꢈꢃꢐꢊꢇꢋꢊꢉꢋꢊꢉꢍꢌꢅꢕꢅ2ꢇꢈꢃꢘꢊꢒꢅꢊꢋꢅꢌꢊꢇꢋꢄꢌꢉꢈꢈꢊꢇꢌꢊꢇꢋꢊꢉꢊ
ꢄꢎꢇꢙ>ꢊꢉꢇꢆꢂꢆꢉꢓꢌ>ꢊꢅꢆꢊꢉꢋꢔꢊꢅꢌꢎꢃꢆꢊꢛꢃꢎꢇꢂꢈꢃꢄꢊꢃ;ꢂꢃꢙꢌꢊꢉꢋꢊꢉꢍꢌꢅꢕꢅ2ꢇꢈꢃꢘꢊꢒꢅꢊꢋꢅꢌꢊꢍꢄꢃꢊꢇꢌꢊꢐꢃꢌꢉꢂꢎꢃꢐꢊꢓꢆꢅꢕꢊꢌꢎꢃꢊ
ꢛꢃꢎꢇꢂꢈꢃꢘ
■ ꢌ#ꢉ*#'ꢉ)*ꢝ !'ꢉ#!ꢉꢜ33#8ꢉ,#%!ꢉ-ꢜ*$ꢉ#!ꢉ()*+ !ꢝꢉ'#ꢉ: ꢉ&ꢜ%+-'ꢉ)*ꢉ'- ꢉ%*)'ꢏꢉ
9ꢅꢊꢙꢆꢃꢛꢃꢋꢌꢊꢇꢋ<ꢍꢆꢔ>ꢊꢐꢅꢊꢋꢅꢌꢊꢖꢃꢌꢊꢔꢅꢍꢆꢊꢎꢉꢋꢐꢊꢅꢆꢊꢓꢇꢋꢖꢃꢆꢄꢊꢂꢉꢍꢖꢎꢌꢊꢇꢋꢊꢕꢅꢛꢇꢋꢖꢊꢙꢉꢆꢌꢄꢊꢅꢆꢊꢇꢋꢊꢌꢎꢃꢊꢐꢇꢄꢂꢊ
ꢄꢈꢅꢌꢘꢊ0ꢄꢙꢃꢂꢇꢉꢈꢈꢔꢊꢗꢉꢌꢂꢎꢊꢅꢍꢌꢊꢓꢅꢆꢊꢇꢋꢓꢉꢋꢌꢄꢘ
,ꢙꢃꢆꢉꢌꢇꢅꢋꢊꢇꢄꢊꢄꢍ2<ꢃꢂꢌꢊꢌꢅꢊꢌꢎꢃꢊꢓꢅꢈꢈꢅꢗꢇꢋꢖꢊꢌꢗꢅꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢄ@ꢊ
.+/ꢊꢌꢎꢇꢄꢊꢐꢃꢛꢇꢂꢃꢊꢕꢉꢔꢊꢋꢅꢌꢊꢂꢉꢍꢄꢃꢊꢇꢋꢌꢃꢆꢓꢃꢆꢃꢋꢂꢃ>ꢊꢉꢋꢐꢊ
.ꢀ/ꢊꢌꢎꢇꢄꢊꢐꢃꢛꢇꢂꢃꢊꢕꢍꢄꢌꢊꢉꢂꢂꢃꢙꢌꢊꢉꢋꢔꢊꢇꢋꢌꢃꢆꢓꢃꢆꢃꢋꢂꢃ>ꢊ
ꢇꢋꢂꢈꢍꢐꢇꢋꢖꢊꢇꢋꢌꢃꢆꢓꢃꢆꢃꢋꢂꢃꢊꢌꢎꢉꢌꢊꢕꢉꢔꢊꢂꢉꢍꢄꢃꢊꢍꢋꢐꢃꢄꢇꢆꢃꢐꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢊꢅꢓꢊꢌꢎꢃꢊꢐꢃꢛꢇꢂꢃꢘ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 6 Friday, July 29, 2005 9:28 AM
'ꢋꢌꢆꢅꢐꢍꢂꢌꢇꢅꢋ
ꢂꢝ ꢉꢃ-)ꢝꢉꢊ!#$%&'ꢉꢈꢜ( ',
■ ꢎ6'! 7 3,ꢉ3#8ꢉ#!ꢉ-)+-ꢉ' 7" !ꢜ'%! ꢝꢉ7ꢜ,ꢉ)*' !( ! ꢉ8)'-ꢉ*#!7ꢜ3ꢉ#" !ꢜ')#*
9ꢎꢃꢊꢇꢋꢄꢇꢐꢃꢊꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢂꢉꢋꢊ2ꢃꢂꢅꢕꢃꢊꢛꢃꢆꢔꢊꢎꢅꢌꢊꢅꢆꢊꢂꢅꢈꢐꢊꢗꢎꢃꢋꢊꢇꢌꢊꢇꢄꢊꢙꢉꢆ4ꢃꢐꢊꢓꢅꢆꢊꢃ;ꢌꢃꢋꢐꢃꢐꢊ
ꢙꢃꢆꢇꢅꢐꢄꢊꢇꢋꢊꢐꢇꢆꢃꢂꢌꢊꢄꢍꢋꢈꢇꢖꢎꢌꢊꢅꢆꢊꢇꢋꢊꢂꢅꢈꢐꢊꢙꢈꢉꢂꢃꢄꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊꢃꢋꢖꢇꢋꢃꢊꢌꢍꢆꢋꢃꢐꢊꢅꢓꢓꢘꢊ9ꢎꢃꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊ
ꢕꢉꢔꢊꢋꢅꢌꢊꢅꢙꢃꢆꢉꢌꢃꢊꢋꢅꢆꢕꢉꢈꢈꢔꢊꢍꢋꢐꢃꢆꢊꢄꢍꢂꢎꢊꢂꢇꢆꢂꢍꢕꢄꢌꢉꢋꢂꢃꢄꢘꢊ9ꢍꢆꢋꢊꢅꢓꢓꢊꢌꢎꢃꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊꢍꢋꢌꢇꢈꢊ
ꢌꢎꢃꢊꢇꢋꢄꢇꢐꢃꢊꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢎꢉꢄꢊꢂꢅꢅꢈꢃꢐꢊꢐꢅꢗꢋꢊꢅꢆꢊꢗꢉꢆꢕꢃꢐꢊꢍꢙꢘꢊ'ꢓꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢐꢅꢃꢄꢊꢋꢅꢌꢊꢅꢙꢃꢆꢉꢌꢃꢊ
ꢌꢎꢃꢆꢃꢉꢓꢌꢃꢆ>ꢊꢂꢅꢋꢄꢍꢈꢌꢊꢉꢋꢊ0;ꢙꢃꢆꢌꢊꢆꢃꢙꢉꢇꢆꢃꢆ>ꢊꢗꢃꢊꢆꢃꢂꢅꢕꢕꢃꢋꢐꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊꢑꢉꢏꢐꢉꢊꢒꢃꢉꢈꢃꢆꢘ
ꢆꢜ9)+ꢜ')#*ꢉꢈ,ꢝ' 7
9ꢎꢇꢄꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊꢍꢌꢇꢈꢇꢏꢃꢄꢊ7 &Bꢊꢄꢉꢌꢃꢈꢈꢇꢌꢃꢊꢄꢇꢖꢋꢉꢈꢄ>ꢊ&ꢙꢃꢃꢐꢊꢄꢃꢋꢄꢅꢆꢊꢉꢋꢐꢊ7ꢔꢆꢅꢄꢃꢋꢄꢅꢆꢊꢌꢅꢊꢌꢆꢉꢂ4ꢊ
ꢉꢋꢐꢊꢐꢇꢄꢙꢈꢉꢔꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃRꢄꢊꢂꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋ>ꢊꢉꢋꢐꢊꢌꢅꢊꢖꢍꢇꢐꢃꢊꢔꢅꢍꢊꢓꢆꢅꢕꢊꢔꢅꢍꢆꢊꢄꢌꢉꢆꢌꢇꢋꢖꢊꢙꢅꢇꢋꢌꢊꢌꢅꢊꢔꢅꢍꢆꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢉꢈꢅꢋꢖꢊꢉꢊꢂꢉꢈꢂꢍꢈꢉꢌꢃꢐꢊꢆꢅꢍꢌꢃꢘ
Bꢊꢜ 7 &ꢊ.7ꢈꢅ2ꢉꢈꢊ ꢅꢄꢇꢌꢇꢅꢋꢇꢋꢖꢊ&ꢔꢄꢌꢃꢕ/ꢊꢇꢄꢊꢉꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢐꢃꢌꢃꢂꢌꢇꢋꢖꢊꢄꢔꢄꢌꢃꢕꢊꢍꢌꢇꢈꢇꢏꢇꢋꢖꢊꢌꢎꢃꢊꢄꢇꢖꢋꢉꢈꢄꢊꢓꢆꢅꢕꢊ7 &ꢊꢄꢉꢌꢃꢈꢈꢇꢌꢃꢄꢊ
ꢐꢃꢙꢈꢅꢔꢃꢐꢊ2ꢔꢊꢌꢎꢃꢊ5ꢘ&ꢘꢊꢒꢃꢓꢃꢋꢄꢃꢊꢒꢃꢙꢉꢆꢌꢕꢃꢋꢌꢘ
ꢈ&! *ꢝ
&ꢂꢆꢃꢃꢋꢄꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢇꢋꢊꢌꢎꢇꢄꢊꢕꢉꢋꢍꢉꢈꢊꢕꢉꢔꢊꢐꢇꢓꢓꢃꢆꢊꢓꢆꢅꢕꢊꢌꢎꢅꢄꢃꢊꢅꢋꢊꢌꢎꢃꢊꢉꢂꢌꢍꢉꢈꢊꢐꢇꢄꢙꢈꢉꢔꢘ
ꢝ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 7 Friday, July 29, 2005 9:28 AM
C
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 8 Friday, July 29, 2005 9:28 AM
#ꢉꢕꢃꢄꢊꢉꢋꢐꢊ)ꢍꢋꢂꢌꢇꢅꢋꢄ
ꢔꢎꢆꢂꢉ5 ,
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢕꢃꢋꢍꢘ
MENU
.
ꢙꢉꢖꢃꢊ+$/
ꢑꢅꢄꢀꢎꢉ5 ,
●'ꢋꢇꢌꢇꢉꢌꢃꢄꢊꢛꢅꢂꢉꢈꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢓꢅꢆꢊꢆꢅꢍꢌꢃꢊ
ꢕꢉꢋꢃꢍꢛꢃꢆꢄꢘꢊ
VOICE
●ꢁꢐ<ꢍꢄꢌꢄꢊꢄꢂꢆꢃꢃꢋꢊDꢍꢉꢈꢇꢌꢔꢘꢊ
.
ꢙꢉꢖꢃꢊ+$/
*
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 9 Friday, July 29, 2005 9:28 AM
ꢙ#,ꢝ')&5
●&ꢃꢈꢃꢂꢌꢄꢊꢇꢌꢃꢕꢄꢊ
ENTER
2ꢔꢊꢌꢇꢈꢌꢇꢋꢖꢊꢇꢌꢊꢍꢙ>ꢊꢐꢅꢗꢋ>ꢊꢆꢇꢖꢎꢌ>ꢊꢉꢋꢐꢊꢈꢃꢓꢌꢘ
●&ꢂꢆꢅꢈꢈꢄꢊꢕꢉꢙꢘꢊ
ꢊꢅꢈꢉ=ꢊ#ꢝ)')#*>ꢉ5 ,
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢔꢅꢍꢆꢊꢂꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢘ
POS
ꢕꢅꢅꢔꢉ5 ,
%ꢎꢉꢋꢖꢃꢄꢊꢌꢎꢃꢊꢕꢉꢙꢊꢄꢂꢉꢈꢃꢘ
ZOOM
ENTER
RET
.
ꢙꢉꢖꢃꢊ+ /
ꢎꢆꢃꢎꢋꢉ5 ,
●0;ꢃꢂꢍꢌꢃꢄꢊꢉꢊꢄꢃꢈꢃꢂꢌꢃꢐꢊꢇꢌꢃꢕꢘ
●ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢙꢅꢙꢊꢍꢙꢊꢕꢃꢋꢍꢘ
ꢋꢎꢃꢉ5 ,
8ꢃꢌꢍꢆꢋꢄꢊꢌꢅꢊꢌꢎꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊꢄꢂꢆꢃꢃꢋꢘ
ꢋꢂꢃꢊꢓꢅꢆꢊꢆꢅꢍꢌꢃꢊ
ꢇꢌꢔꢘꢊ
E
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 10 Friday, July 29, 2005 9:28 AM
ꢁꢂꢌꢇꢛꢉꢌꢇꢅꢋ
'ꢋꢄꢃꢆꢌꢊꢌꢎꢃꢊꢕꢉꢙꢊꢐꢇꢄꢂꢊꢇꢋꢌꢅꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢌꢅꢊꢄꢌꢉꢆꢌꢊꢌꢎꢃꢊꢑꢅ2ꢇꢈꢃꢊ#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢔꢄꢌꢃꢕꢘ
■ ꢔꢜ"ꢉꢌ)ꢝ&
● 8ꢃꢓꢃꢆꢊꢌꢅꢊO1ꢉꢋꢐꢈꢇꢋꢖꢊꢉꢋꢐꢊ%ꢉꢆꢃꢊꢅꢓꢊꢑꢉꢙꢊꢒꢇꢄꢂꢄPꢊꢌꢅꢊ4ꢋꢅꢗꢊꢎꢅꢗꢊꢌꢅꢊꢎꢉꢋꢐꢈꢃꢊꢉꢊꢕꢉꢙꢊ
ꢇꢁ ꢈꢄꢉꢃꢆ
ꢐꢇꢄꢂꢊ.
ꢉꢙꢉꢖꢃꢊ $/ꢘ
Note
●9ꢎꢃꢊꢕꢉꢙꢊꢐꢇꢄꢂꢊꢂꢉꢋꢋꢅꢌꢊ2ꢃꢊꢇꢋꢄꢃꢆꢌꢃꢐꢊꢅꢆꢊꢃ<ꢃꢂꢌꢃꢐꢊꢗꢎꢇꢈꢃꢊꢌꢎꢃꢊꢇꢖꢋꢇꢌꢇꢅꢋꢊꢄꢗꢇꢌꢂꢎꢊꢇꢄꢊꢇꢋꢊꢌꢎꢃꢊ,))ꢊꢙꢅꢄꢇꢌꢇꢅꢋꢘ
●8ꢃꢕꢃꢕ2ꢃꢆꢊꢌꢎꢉꢌꢊꢌꢎꢃꢊ2ꢉꢌꢌꢃꢆꢔꢊꢂꢉꢋꢊꢆꢍꢋꢊꢐꢅꢗꢋꢊꢇꢓꢊꢌꢎꢃꢊꢇꢖꢋꢇꢌꢇꢅꢋꢊꢄꢗꢇꢌꢂꢎꢊꢇꢄꢊ4ꢃꢙꢌꢊꢇꢋꢊꢌꢎꢃꢊ,#ꢊꢅꢆꢊꢁ%%ꢊ
ꢙꢅꢄꢇꢌꢇꢅꢋꢊꢓꢅꢆꢊꢉꢊꢈꢅꢋꢖꢊꢌꢇꢕꢃꢊꢗꢎꢇꢈꢃꢊꢌꢎꢃꢊꢃꢋꢖꢇꢋꢃꢊꢋꢅꢌꢊꢆꢍꢋꢋꢇꢋꢖꢘ
ꢃ%!*ꢉ'- ꢉ)+*)')#*ꢉꢝ8)'&-ꢉ
Note
'#ꢉ'- ꢉꢅꢆꢉ"#ꢝ)')#*ꢉꢜ*$ꢉ
+
ꢉ'#ꢉ#" *ꢉ
●ꢀꢁꢂꢃꢄꢅꢂꢃꢆꢇ ꢈꢄ ꢉꢊꢇꢋꢄꢌ ꢉꢄꢍꢋꢄ ꢅꢎꢏꢃꢐꢋꢅꢄꢍꢈꢄꢆꢑꢋꢃꢃꢂꢉꢊꢄ
ꢒ
TILT
"! ꢝꢝꢉ
OPEN
'- ꢉ$)ꢝ"3ꢜ,ꢏ
ꢚꢎꢃꢋꢊꢌꢎꢃꢊ
ꢊꢇꢄꢊ
TILT
ꢙꢆꢃꢄꢄꢃꢐ>ꢊꢌꢎꢃꢊꢐꢇꢄꢙꢈꢉꢔꢊ
ꢉꢋꢖꢈꢃꢊꢂꢎꢉꢋꢖꢃꢄꢊꢇꢋꢊ
ꢄꢌꢉꢖꢃꢄꢘ
● ꢆꢃꢄꢄꢊ
ꢊꢌꢅꢊꢂꢈꢅꢄꢃꢊꢌꢎꢃꢊꢐꢇꢄꢙꢈꢉꢔꢘ
OPEN
ꢄ*ꢝ !'ꢉ'- ꢉ7ꢜ"ꢉ$)ꢝ&ꢉ
8)'-ꢉ'- ꢉ"!)*' $ꢉꢝ)$ ꢉ
(ꢜ&)*+ꢉ%"ꢏ
Note
ꢀ
●ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢇꢆꢈꢃꢆꢉꢃꢊꢋꢌꢅꢈꢂꢍꢃꢆꢇꢃꢈꢁꢂꢃꢎꢂꢇꢈꢂꢏꢃꢎꢋꢇꢉꢋꢊꢂꢐꢑꢂꢅꢏꢒꢓ
●%ꢅꢋꢐꢃꢋꢄꢉꢌꢇꢅꢋꢊꢕꢉꢔꢊꢓꢅꢆꢕꢊꢅꢋꢊꢌꢎꢃꢊꢅꢙꢌꢇꢂꢉꢈꢊꢈꢃꢋꢄꢊꢅꢆꢊꢌꢎꢃꢊ
ꢕꢉꢙꢊꢐꢇꢄꢂꢊꢇꢋꢄꢇꢐꢃꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢗꢎꢃꢋꢊꢌꢎꢃꢊꢌꢃꢕꢙꢃꢆꢉꢌꢍꢆꢃꢊꢇꢋꢊ
ꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢋꢂꢆꢃꢉꢄꢃꢄꢊꢇꢋꢊꢉꢊꢄꢎꢅꢆꢌꢊꢌꢇꢕꢃꢊꢄꢍꢂꢎꢊꢉꢄꢊꢗꢎꢃꢋꢊ
ꢎꢃꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢂꢉꢆꢊꢅꢋꢊꢉꢊꢂꢅꢈꢐꢊꢐꢉꢔꢘꢊ9ꢎꢇꢄꢊꢂꢅꢋꢐꢃꢋꢄꢉꢌꢇꢅꢋꢊ
ꢕꢉꢔꢊꢂꢉꢍꢄꢃꢊꢕꢉꢈꢓꢍꢋꢂꢌꢇꢅꢋꢄꢘꢊ'ꢓꢊꢄꢅ>ꢊꢌꢎꢃꢋꢊꢍꢋꢈꢅꢉꢐꢊꢌꢎꢃꢊꢕꢉꢙꢊ
ꢐꢇꢄꢂꢊꢉꢋꢐꢊꢐꢅꢊꢋꢅꢌꢊꢅꢙꢃꢆꢉꢌꢃꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢓꢅꢆꢊꢉꢙꢙꢆꢅ;ꢇꢕꢉꢌꢃꢈꢔꢊ+ꢊ
ꢎꢅꢍꢆꢘꢊꢚꢇꢙꢃꢊꢌꢎꢃꢊꢂꢅꢋꢐꢃꢋꢄꢉꢌꢇꢅꢋꢊꢅꢓꢓꢊꢌꢎꢃꢊꢕꢉꢙꢊꢐꢇꢄꢂꢊꢗꢇꢌꢎꢊꢉꢊ
ꢄꢅꢓꢌꢊꢂꢈꢅꢌꢎꢘ
'ꢓꢊꢌꢎꢃꢊꢍꢋꢇꢌꢊꢐꢅꢃꢄꢊꢋꢅꢌꢊꢅꢙꢃꢆꢉꢌꢃꢊꢂꢅꢆꢆꢃꢂꢌꢈꢔꢊꢉꢓꢌꢃꢆꢊ+ꢊꢎꢅꢍꢆ>ꢊ
ꢌꢎꢃꢋꢊꢂꢅꢋꢄꢍꢈꢌꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊꢑꢉꢏꢐꢉꢊꢒꢃꢉꢈꢃꢆꢘ
H%ꢁ59',#Iꢊꢄꢂꢆꢃꢃꢋ
+!
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 11 Friday, July 29, 2005 9:28 AM
ꢋ ꢜ$ꢉꢀꢁꢂꢃꢄꢅꢆꢉ
&ꢜ! (%33,;ꢉꢜ*$ꢉꢝ 3 &'ꢉ
ꢑꢅꢄꢌꢊꢓꢍꢋꢂꢌꢇꢅꢋꢄꢊꢉꢆꢃꢊꢇꢋꢎꢇ2ꢇꢌꢃꢐꢊꢗꢎꢇꢈꢃꢊꢌꢎꢃꢊ
ꢛꢃꢎꢇꢂꢈꢃꢊꢇꢄꢊꢇꢋꢊꢕꢅꢌꢇꢅꢋꢘ
ꢈꢃꢉꢄꢃꢊꢆꢃꢉꢐꢊꢌꢎꢃꢊꢎꢉꢋꢐ2ꢅꢅ4ꢊꢓꢅꢆꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢊ
ꢇꢋꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢘ
ꢁꢈꢗꢉꢔꢄꢊꢅ2ꢃꢔꢊꢌꢆꢉꢓꢓꢇꢂꢊꢆꢃꢖꢍꢈꢉꢌꢇꢅꢋꢄꢘ
$
ꢉꢜ*$ꢉ"! ꢝꢝꢉ
ꢆꢁꢇ ꢄꢈꢃ
ꢏ
ENTER
●9ꢎꢃꢊ%ꢍꢆꢆꢃꢋꢌꢊ ꢅꢄꢇꢌꢇꢅꢋꢊꢄꢂꢆꢃꢃꢋꢊꢉꢙꢙꢃꢉꢆꢄꢘ
Note
●=ꢅꢍꢊꢂꢉꢋꢊꢄꢃꢈꢃꢂꢌꢊꢌꢎꢃꢊꢈꢉꢋꢖꢍꢉꢖꢃꢊ2ꢔꢊꢄꢃꢈꢃꢂꢌꢊ
ꢄꢃꢈꢃꢂꢌꢃꢐꢊꢈꢉꢋꢖꢍꢉꢖꢃꢊꢍꢄꢇꢋꢖꢊ"ꢉꢋꢖꢍꢉꢖꢃꢊ&ꢃꢈꢃꢂꢌꢇꢅꢋꢘꢊ.
ꢊꢉꢋꢐꢊꢙꢆꢃꢄꢄꢊ
ꢘꢊ=ꢅꢍꢊꢂꢉꢋꢊꢉꢈꢄꢅꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊ
ENTER
ꢙꢉꢖꢃꢊ( /
●9ꢎꢃꢊ%ꢁ59',#ꢊꢄꢂꢆꢃꢃꢋꢊꢆꢃꢕꢉꢇꢋꢄꢊꢅꢋꢊꢌꢎꢃꢊꢐꢇꢄꢙꢈꢉꢔꢊꢍꢋꢈꢃꢄꢄꢊꢔꢅꢍꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊꢉꢋꢐꢊꢙꢆꢃꢄꢄꢊ
ꢘ
ENTER
ꢋ 7#9)*+ꢉ'- ꢉꢔꢜ"ꢉꢌ)ꢝ&
ꢐ- *ꢉ'- ꢉ)+*)')#*ꢉꢝ8)'&-ꢉ)ꢝꢉ)*ꢉ'- ꢉꢁꢀꢀꢉ"#ꢝ)')#*;ꢉꢜ*$ꢉ"! ꢝꢝꢉ ꢉ=ꢎꢙꢎꢀꢃ>ꢏ
● ꢒꢅꢊꢋꢅꢌꢊꢖꢃꢌꢊꢔꢅꢍꢆꢊꢎꢉꢋꢐꢊꢅꢆꢊꢓꢇꢋꢖꢃꢆꢄꢊꢂꢉꢍꢖꢎꢌꢊ
ꢇꢋꢊꢕꢅꢛꢇꢋꢖꢊꢙꢉꢆꢌꢄꢊꢅꢆꢊꢇꢋꢊꢌꢎꢃꢊꢐꢇꢄꢂꢊꢄꢈꢅꢌꢘꢊ9ꢎꢇꢄꢊ
ꢂꢉꢋꢊꢂꢉꢍꢄꢃꢊꢇꢋ<ꢍꢆꢇꢃꢄꢘꢊ%ꢎꢇꢈꢐꢆꢃꢋꢊꢉꢆꢃꢊ
ꢆꢁꢇ ꢄꢈꢃ
ꢇꢋDꢍꢇꢄꢇꢌꢇꢛꢃ>ꢊꢌꢆꢔꢊꢌꢅꢊꢇꢋꢄꢌꢉꢈꢈꢊꢅꢆꢊꢆꢃꢕꢅꢛꢃꢊꢌꢎꢃꢊ
ꢕꢉꢙꢊꢐꢇꢄꢂꢊꢗꢇꢌꢎꢅꢍꢌꢊꢇꢋꢓꢉꢋꢌꢄꢊꢈꢅꢅ4ꢇꢋꢖꢊꢅꢋꢘ
ꢒ%''#*ꢝꢉ#*ꢉ'- ꢉꢝ&! *
&ꢃꢈꢃꢂꢌꢊꢌꢎꢃꢊ2ꢍꢌꢌꢅꢋꢄꢊ2ꢔꢊꢍꢄꢇꢋꢖꢊJꢅꢔꢄꢌꢇꢂ4ꢊꢉꢋꢐꢊꢙꢆꢃꢄꢄꢊ
%ꢅꢈꢅꢆꢄꢊꢓꢅꢆꢊꢍꢋꢉꢛꢉꢇꢈꢉ2ꢈꢃꢊ2ꢍꢌꢌꢅꢋꢄꢊꢗꢇꢈꢈꢊ2ꢃꢊꢙꢉꢈꢃꢘ
ꢘ
ENTER
++
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 12 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢃꢄꢅꢄꢆꢇꢃ ꢅꢆꢄꢈꢅꢉꢊꢄꢁꢋꢌꢍꢄ
ꢈ&! *ꢝꢉꢒ (#! ꢉꢈ '')*+ꢉꢋ#%'
.+/
.ꢀ/
.(/
.$/
ENTER
ENTER
ꢀ%!! *'ꢉ"#ꢝ)')#*ꢉꢝ&! *
RET
RET
8ꢃꢌꢍꢆꢋꢄꢊꢉꢓꢌꢃꢆꢊꢉꢊ
ꢓꢃꢗꢊꢄꢃꢂꢅꢋꢐꢄꢘ
. /
.ꢝ/
.C/
.E/ .+!/
.C/
.*/ .E/ .+!/
=.> ꢔꢜ"ꢉꢅ!) *'ꢜ')#*ꢉ&#*'!#3
ꢙꢉꢖꢃꢊ+ /
ꢌꢍꢎ ꢏꢐꢈ ꢌꢏꢑꢆꢒꢁꢑ ꢐꢆꢓꢃꢅꢃꢆꢇꢃꢇꢄ ꢈꢔꢓꢅꢉꢕꢎ ꢕꢁꢖꢗꢉꢖ =@> ꢈ 'ꢉꢌ ꢝ')*ꢜ')#*ꢉ:%''#*
=?> ꢈ&! *ꢉꢀ#*()+%!ꢜ')#*
.
.
ꢙꢉꢖꢃꢊ+(/
.
ꢌꢘꢎ ꢙꢑꢆꢚꢗ
ꢙꢉꢖꢃꢊ(C/
ꢀꢁꢂꢃꢄꢂꢅꢆꢇ ꢈꢆꢇꢉ ꢃꢉꢊꢃꢋꢈꢌꢃꢍꢉꢇ ꢆꢃꢋꢇꢎꢎꢃꢏꢂꢃꢅꢂꢆꢃꢈꢆꢃꢆꢁꢂꢃ
ꢍꢉꢅꢇꢆꢇꢉ ꢃꢍꢉꢇ ꢆꢂꢄꢃꢏꢌꢃ ꢃꢇ ꢃꢆꢁꢂꢃꢅꢐꢊꢉꢎꢎꢃꢅꢐꢊꢂꢂ ꢑ
=A> ꢈ'#! ꢉꢔ 7#!,ꢉꢊ#)*'ꢉ:%''#*
&ꢌꢅꢆꢃꢄꢊꢕꢉꢆ4ꢃꢆꢄꢊꢅꢋꢊꢌꢎꢃꢊꢕꢉꢙꢘ
=.B> ꢊꢅꢄꢉ=ꢊ#)*'ꢉ#(ꢉꢄ*' ! ꢝ'>ꢉꢌ)ꢝ"3ꢜ,ꢉ:%''#*
%ꢈꢅꢂ4ꢊꢗꢇꢈꢈꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢗꢎꢃꢋꢊꢔꢅꢍꢊꢄꢃꢌꢊꢍꢙꢊ
%ꢈꢅꢂ4ꢊꢅꢋꢊ#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢃꢌꢊ5ꢙꢊ,ꢋꢘ
=2> ꢑ -)&3 ꢉ7ꢜ!5 !
&ꢎꢅꢗꢄꢊꢌꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢉꢋꢐꢊ
ꢐꢇꢆꢃꢂꢌꢇꢅꢋꢊꢅꢓꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃꢘ
=4> ꢈ&ꢜ3 ꢉ$)ꢝ"3ꢜ,
.
ꢙꢉꢖꢃꢊꢀꢀ/
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊꢄꢂꢉꢈꢃꢊꢅꢓꢊꢌꢎꢃꢊꢕꢉꢙꢘ
=/> ꢌ)ꢝ'ꢜ*& ꢉ(!#7ꢉ&%!! *'ꢉ"#ꢝ)')#*
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢓꢆꢅꢕꢊꢌꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊ
ꢙꢅꢄꢇꢌꢇꢅꢋꢊꢌꢅꢊꢌꢎꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢙꢅꢇꢋꢌꢃꢐꢊ2ꢔꢊ
ꢘ
ꢈ&! *ꢝꢉꢌ%!)*+ꢉꢋ#%' ꢉꢚ%)$ꢜ*&
.$/
ENTER
.ꢀ/
.+/
RET
8ꢃꢌꢍꢆꢋꢄꢊꢉꢓꢌꢃꢆꢊꢉꢊ
ꢓꢃꢗꢊꢄꢃꢂꢅꢋꢐꢄꢘ
.(/
. /
.ꢝ/
ꢌꢛꢎ ꢜꢃꢓꢅꢁꢇꢚꢉ ꢁꢇꢝ ꢃꢕꢉ ꢅꢆ ꢜꢉꢓꢅꢃꢇꢁꢅꢃꢆꢇ ꢝꢃꢓꢋꢑꢁꢔ =1> ꢃ%!*ꢉꢁ!!#8ꢉ$)ꢝ"3ꢜ,
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊꢌꢇꢕꢃBꢊꢉꢋꢐꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢌꢅꢊꢌꢎꢃꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢅꢆꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢘ
ꢀꢁꢂꢃꢄꢅꢆꢁꢇꢅ ꢈꢉꢇꢊꢆꢈꢂꢋꢅꢆꢂꢅꢆꢌꢉꢋꢅꢍꢆꢅꢆꢁꢇꢅꢋꢇꢎꢆꢅ
ꢏꢌꢋꢊꢆꢈꢂꢋꢅꢍꢋ ꢅꢆꢁꢇꢅ ꢈꢄꢆꢍꢋꢊꢇꢅꢆꢂꢅꢆꢁꢇꢅꢏꢌꢋꢊꢆꢈꢂꢋꢐ
&ꢃꢈꢃꢂꢌꢇꢋꢖꢊꢌꢎꢇꢄꢊꢗꢇꢈꢈꢊꢐꢇꢄꢙꢈꢉꢔꢊꢌꢎꢃꢊꢋꢃ;ꢌꢊꢉꢋꢐꢊ =2> ꢀ%!! *'ꢉꢋ#ꢜ$ꢉꢆꢜ7
ꢓꢍꢆꢌꢎꢃꢆꢊꢇꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋꢊꢅꢋꢊꢌꢎꢃꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢊꢅꢆꢊ
ꢌꢇꢕꢃꢊꢉꢋꢐꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢌꢅꢊꢌꢎꢃꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢘ
&ꢎꢅꢗꢄꢊꢌꢎꢃꢊꢋꢉꢕꢃꢊꢅꢓꢊꢌꢎꢃꢊꢆꢅꢉꢐꢊꢔꢅꢍꢊꢉꢆꢃꢊ
ꢂꢍꢆꢆꢃꢋꢌꢈꢔꢊꢐꢆꢇꢛꢇꢋꢖꢊꢅꢋꢘ
.Bꢊ0ꢇꢌꢎꢃꢆꢊꢆꢃDꢍꢇꢆꢃꢐꢊꢌꢇꢕꢃꢊꢅꢆꢊꢃꢄꢌꢇꢕꢉꢌꢃꢐꢊꢌꢇꢕꢃꢊ =4> ꢀ-ꢜ*+ ꢉꢋ#%' ꢉ:%''#*
ꢉꢆꢆꢇꢛꢉꢈ/
ꢒꢇꢅꢍꢎꢈꢌꢅꢃꢆꢁꢂꢃꢓꢉꢔꢆꢂꢃꢕꢍꢆꢇꢉ ꢃꢖꢂ ꢔꢃꢅꢉꢃꢆꢁꢈꢆꢃ
ꢅꢂꢆꢆꢇ ꢗꢅꢃꢘꢉꢊꢃꢊꢉꢔꢆꢂꢃꢐꢈꢎꢐꢔꢎꢈꢆꢇꢉ ꢃꢐꢈ ꢃꢏꢂꢃꢐꢁꢈ ꢗꢂꢄꢑ
=/> ꢑ#3%7 ꢉ:%''#*
ꢀꢁꢂꢃꢄꢅꢆꢂꢇ ꢈꢉꢇꢊꢋꢄꢌꢍꢉꢇꢅꢎꢏꢌꢂ ꢍꢉꢐ ꢇꢂꢑꢒꢉꢉꢐꢓ
=0> ꢋ#%' ꢉ$)ꢝ"3ꢜ,
&ꢎꢅꢗꢄꢊꢌꢎꢃꢊꢙꢆꢅꢛꢇꢐꢃꢐꢊꢆꢅꢍꢌꢃꢊꢉꢄꢊꢉꢊꢌꢎꢇꢂ4ꢊ
2ꢈꢍꢃꢊꢈꢇꢋꢃꢘ
+ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 13 Friday, July 29, 2005 9:28 AM
ꢔ *%
ꢔ *%ꢉꢜ"" ꢜ!ꢝꢉ8- *ꢉ"! ꢝꢝ)*+ꢉ
ꢏꢉ
MENU
ꢒꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊ0ꢋꢌꢆꢔꢊꢉꢋꢐꢊ8ꢅꢍꢌꢃꢊ&ꢃꢉꢆꢂꢎꢊ.
ꢙꢉꢖꢃꢊ+ꢝ/
ꢁꢐꢐꢆꢃꢄꢄꢊ3ꢅꢅ4ꢊ.
ꢙꢉꢖꢃꢊ$ꢀ/
ꢙꢉꢖꢃꢊꢀ /
ꢙꢉꢖꢃꢊ$*/
ꢙꢉꢖꢃꢊꢀꢝ/
%ꢉꢋꢂꢃꢈꢊ7ꢍꢇꢐꢉꢋꢂꢃꢊ.
#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢃꢌꢊ5ꢙꢊ.
8ꢅꢍꢌꢃꢊ,ꢙꢌꢇꢅꢋꢄꢊ.
ꢈ&! *ꢉꢜ$C%ꢝ'7 *'ꢝꢉꢜ*$ꢉꢝ '')*+ꢝ
ꢒꢇꢄꢙꢈꢉꢔꢊꢑꢃꢋꢍꢊꢄꢂꢆꢃꢃꢋꢊꢗꢇꢈꢈꢊ2ꢃꢊꢄꢎꢅꢗꢋꢊꢗꢎꢃꢋꢊꢔꢅꢍꢊꢙꢆꢃꢄꢄꢊ
ꢊ.ꢒ'& /ꢊꢉꢋꢐꢊꢎꢅꢈꢐꢘ
VOICE
Note
ꢒꢇꢄꢙꢈꢉꢔꢊꢑꢃꢋꢍꢊꢄꢂꢆꢃꢃꢋꢊꢗꢇꢈꢈꢊ2ꢃꢊꢐꢇꢄꢉꢙꢙꢃꢉꢆꢃꢐꢊꢗꢎꢃꢋꢊꢌꢎꢃꢔꢊꢎꢉꢛꢃꢊ2ꢃꢃꢋꢊꢍꢋꢍꢄꢃꢐꢊꢐꢍꢆꢇꢋꢖꢊꢉꢊꢓꢃꢗꢊꢄꢃꢂꢅꢋꢐꢄꢘ
■ ꢁ$C%ꢝ')*+ꢉ'- ꢉꢝ&! *ꢉD%ꢜ3)',
●ꢁꢐ<ꢍꢄꢌꢄꢊꢌꢎꢃꢊꢄꢂꢆꢃꢃꢋꢊ2ꢆꢇꢖꢎꢌꢋꢃꢄꢄ
&ꢃꢈꢃꢂꢌꢊOꢁꢒJꢘP>ꢊꢙꢆꢃꢄꢄꢊ
>ꢊꢉꢋꢐꢊꢌꢎꢃꢋꢊꢄꢃꢈꢃꢂꢌꢊO38'719P>ꢊꢙꢆꢃꢄꢄꢊ
ꢊꢉꢋꢐꢊꢌꢎꢃꢊꢄꢂꢆꢃꢃꢋꢊꢗꢇꢈꢈꢊ
ENTER
ENTER
2ꢃꢊ2ꢆꢇꢖꢎꢌꢃꢆꢊꢗꢎꢃꢋꢊꢄꢂꢆꢅꢈꢈꢇꢋꢖꢊꢇꢌꢊꢌꢅꢊꢌꢎꢃꢊꢆꢇꢖꢎꢌ>ꢊꢅꢆꢊꢐꢉꢆ4ꢃꢆꢊꢗꢎꢃꢋꢊꢄꢂꢆꢅꢈꢈꢇꢋꢖꢊꢇꢌꢊꢌꢅꢊꢌꢎꢃꢊꢈꢃꢓꢌꢘ
●ꢁꢐ<ꢍꢄꢌꢄꢊꢌꢎꢃꢊꢄꢂꢆꢃꢃꢋꢊꢂꢅꢋꢌꢆꢉꢄꢌ
&ꢃꢈꢃꢂꢌꢊOꢁꢒJꢘP>ꢊꢙꢆꢃꢄꢄꢊ
>ꢊꢉꢋꢐꢊꢌꢎꢃꢋꢊꢄꢃꢈꢃꢂꢌꢊO%,#98ꢁ&9P>ꢊꢙꢆꢃꢄꢄꢊ
ꢊꢉꢋꢐꢊꢌꢎꢃꢊꢄꢂꢆꢃꢃꢋꢊ
ENTER
ENTER
ꢗꢇꢈꢈꢊ2ꢃꢊꢈꢇꢖꢎꢌꢃꢆꢊꢗꢎꢃꢋꢊꢄꢂꢆꢅꢈꢈꢇꢋꢖꢊꢇꢌꢊꢌꢅꢊꢌꢎꢃꢊꢆꢇꢖꢎꢌ>ꢊꢅꢆꢊꢐꢃꢃꢙꢃꢆꢊꢗꢎꢃꢋꢊꢄꢂꢆꢅꢈꢈꢇꢋꢖꢊꢇꢌꢊꢌꢅꢊꢌꢎꢃꢊꢈꢃꢓꢌꢘ
Note
# ꢁꢐ<ꢍꢄꢌꢊ2ꢔꢊꢄꢂꢆꢅꢈꢈꢇꢋꢖꢊꢌꢎꢃꢊJꢅꢔꢄꢌꢇꢂ4ꢊꢌꢅꢊꢌꢎꢃꢊꢆꢇꢖꢎꢌꢊꢉꢋꢐꢊꢈꢃꢓꢌꢘ
# 8ꢃꢄꢌꢅꢆꢃꢊꢌꢎꢃꢊꢉꢐ<ꢍꢄꢌꢕꢃꢋꢌꢊꢛꢉꢈꢍꢃꢊꢌꢅꢊꢌꢎꢃꢊꢐꢃꢓꢉꢍꢈꢌꢊꢗꢎꢃꢋꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊO80&09P>ꢊꢙꢆꢃꢄꢄꢊ
ꢘ
ENTER
■ ꢀ3 ꢜ!)*+ꢉ'- ꢉꢝ&! *
&ꢃꢈꢃꢂꢌꢊOꢒ'& ꢊ,))P>ꢊꢙꢆꢃꢄꢄꢊ
ꢊꢉꢋꢐꢊꢌꢎꢃꢊꢄꢂꢆꢃꢃꢋꢊꢗꢇꢈꢈꢊꢐꢇꢄꢉꢙꢙꢃꢉꢆꢘ
ENTER
9ꢎꢃꢊꢄꢂꢆꢃꢃꢋꢊꢗꢇꢈꢈꢊꢉꢙꢙꢃꢉꢆꢊꢉꢖꢉꢇꢋꢊꢗꢎꢃꢋꢊꢙꢆꢃꢄꢄꢇꢋꢖꢊꢉꢋꢔꢊ2ꢍꢌꢌꢅꢋꢄꢘ
■ ꢌꢜ,')7 ꢉꢝ&! *ꢓꢆ)+-'ꢉꢝ&! *
ꢚꢎꢃꢋꢊꢌꢎꢃꢊꢎꢃꢉꢐꢈꢇꢖꢎꢌꢄꢊꢉꢆꢃꢊꢅꢋ>ꢊꢐꢉꢔꢌꢇꢕꢃꢊꢕꢅꢐꢃꢊꢂꢉꢋꢊꢉꢈꢄꢅꢊ2ꢃꢊꢄꢃꢈꢃꢂꢌꢃꢐꢊ.ꢇꢓꢊꢃ;ꢌꢆꢉꢊꢄꢂꢆꢃꢃꢋꢊꢂꢃꢆꢌꢉꢇꢋꢊ
ꢋꢇꢖꢎꢌꢌꢇꢕꢃꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢄ/ꢘꢊ9ꢎꢇꢄꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢊꢂꢉꢋꢊꢅꢋꢈꢔꢊ2ꢃꢊꢐꢅꢋꢃꢊꢗꢎꢃꢋꢊꢌꢎꢃꢊꢎꢃꢉꢐꢈꢇꢖꢎꢌꢄꢊꢉꢆꢃꢊꢅꢋꢘꢊ ꢆꢃꢄꢄꢊ
ꢊꢌꢅꢊꢄꢗꢇꢌꢂꢎꢊ2ꢃꢌꢗꢃꢃꢋꢊꢐꢉꢔꢊꢉꢋꢐꢊꢋꢇꢖꢎꢌꢊꢕꢅꢐꢃꢄꢘ
ENTER
+$
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 14 Friday, July 29, 2005 9:28 AM
&ꢂꢆꢃꢃꢋꢊꢂꢎꢉꢋꢖꢃ
ꢀꢁꢂꢂꢃꢄꢅꢆꢇ ꢈꢉꢅꢉ ꢄꢆꢊꢋꢇ
&ꢎꢅꢗꢄꢊꢌꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢅꢓꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃꢊ
ꢅꢋꢊꢌꢎꢃꢊꢄꢂꢉꢈꢃꢊꢄꢃꢈꢃꢂꢌꢃꢐꢘ
ꢌ ꢁꢅꢃꢆꢋꢄꢍꢆꢎꢏꢋꢐꢈ
ꢚꢎꢃꢋꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢎꢉꢄꢊ2ꢃꢃꢋꢊꢄꢃꢌ>ꢊꢌꢎꢃꢊ2ꢈꢍꢃꢊꢈꢇꢋꢃꢊ
ꢆꢃꢙꢆꢃꢄꢃꢋꢌꢄꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢉꢋꢐꢊꢌꢎꢃꢊꢓꢅꢈꢈꢅꢗꢇꢋꢖꢊꢌꢗꢅꢊ
ꢓꢈꢉꢖꢄꢊꢉꢙꢙꢃꢉꢆꢊꢅꢋꢊꢌꢎꢃꢊꢕꢉꢙꢘ
ꢊ! ꢝꢝꢉ
ꢉꢜ*$ꢉꢈ 3 &'ꢉ
ENTER
ꢜ ꢒꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢙꢅꢇꢋꢌ
ꢔꢜ"ꢉ
&#*()+%!ꢜ')#*
ꢈ)*+3 ꢉ7ꢜ"
,ꢋꢃ?ꢄꢂꢆꢃꢃꢋꢊꢐꢇꢄꢙꢈꢉꢔꢊꢅꢓꢊꢕꢉꢙꢊꢙꢅꢄꢄꢇ2ꢈꢃꢘ
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢄꢉꢊꢅꢋꢃꢂꢌꢄꢍꢎꢄꢏꢂꢋꢐ
ꢌ%ꢜ3ꢉ7ꢜ"
ꢃ%!*ꢉꢍ)ꢝ'
ꢚꢎꢇꢈꢃꢊꢍꢄꢇꢋꢖꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃ>ꢊꢌꢎꢃꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢄꢊꢓꢅꢆꢊ
ꢌꢎꢃꢊꢋꢃ;ꢌꢊ<ꢍꢋꢂꢌꢇꢅꢋꢊꢗꢎꢃꢆꢃꢊꢔꢅꢍꢊꢎꢉꢛꢃꢊꢌꢅꢊꢌꢍꢆꢋꢊꢉꢆꢃꢊ
ꢄꢎꢅꢗꢋꢊꢉꢄꢊ9ꢍꢆꢋꢊ"ꢇꢄꢌꢘ
ꢚꢎꢇꢈꢃꢊꢍꢄꢇꢋꢖꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃ>ꢊꢌꢎꢃꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢄꢊꢓꢅꢆꢊ
ꢌꢎꢃꢊꢋꢃ;ꢌꢊ<ꢍꢋꢂꢌꢇꢅꢋꢊꢗꢎꢃꢆꢃꢊꢔꢅꢍꢊꢎꢉꢛꢃꢊꢌꢅꢊꢌꢍꢆꢋꢊꢉꢆꢃꢊ
ꢄꢎꢅꢗꢋꢊꢉꢄꢊ9ꢍꢆꢋꢊꢁꢆꢆꢅꢗꢘ
ꢃ%!*ꢉꢁ!!#8
3ꢃꢓꢅꢆꢃꢊꢉꢊꢓꢅꢆ4ꢊꢇꢋꢊꢌꢎꢃꢊꢆꢅꢉꢐ>ꢊꢉꢋꢊꢃꢋꢈꢉꢆꢖꢃꢐꢊꢐꢇꢉꢖꢆꢉꢕꢊꢅꢓꢊꢌꢎꢃꢊ<ꢍꢋꢂꢌꢇꢅꢋꢊꢉꢍꢌꢅꢕꢉꢌꢇꢂꢉꢈꢈꢔꢊ
ꢉꢙꢙꢃꢉꢆꢄꢊꢇꢋꢊꢉꢊꢄꢃꢂꢅꢋꢐꢊꢄꢂꢆꢃꢃꢋꢘꢊ9ꢎꢇꢄꢊꢇꢄꢊꢌꢅꢊꢕꢉ4ꢃꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢃꢛꢃꢋꢊꢂꢈꢃꢉꢆꢃꢆꢘꢊ
ꢎ*3ꢜ!+ $ꢉ
ꢙ%*&')#*ꢉ
ꢌ)ꢜ+!ꢜ7
ꢊ
9ˆꢀvtꢁꢀ‚ˆ‡rꢁtˆvqhprꢂꢁhꢁryhꢀtrqꢁqvhtꢀh€ꢁ 9ˆꢀvtꢁꢀ‚ˆ‡rꢁtˆvqhprꢂꢁhꢁryhꢀtrqꢁ
‚sꢁhꢁhƒƒꢀ‚hpuvtꢁs‚ꢀxꢁ‚ꢀꢁwˆp‡v‚ꢁhƒƒrhꢀ†ꢃꢁ qvhtꢀh€ꢁ‚sꢁ‡urꢁsꢀrrh’ꢁhˆ‡‚€h‡vphyy’ꢁ
Xurꢁ’‚ˆꢁqꢀv‰rꢁƒh†‡ꢁ‡urꢁwˆp‡v‚ꢂꢁ‡urꢁ
ryhꢀtrqꢁqvhtꢀh€ꢁqv†hƒƒrhꢀ†ꢃ
hƒƒrhꢀ†ꢁvꢁhꢁ†rp‚qꢁ†pꢀrrꢁh†ꢁ’‚ˆꢁ
hƒƒꢀ‚hpuꢁhꢁs‚ꢀxꢁ‚ꢁ‡urꢁsꢀrrh’ꢃꢁUuv†ꢁv†ꢁ‡‚ꢁ
€hxrꢁꢀ‚ˆ‡rꢁtˆvqhprꢁr‰rꢁpyrhꢀrꢀꢃ
ꢁꢊꢄꢇꢕꢙꢈꢇꢓꢇꢃꢐꢊꢐꢇꢉꢖꢆꢉꢕꢊꢅꢓꢊꢌꢎꢃꢊꢓꢆꢃꢃꢗꢉꢔꢊꢂꢉꢋꢊ2ꢃꢊ
ꢐꢇꢄꢙꢈꢉꢔꢃꢐꢘ
ꢗ! 8ꢜ,ꢉ
)*(#!7ꢜ')#*
+(
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 15 Friday, July 29, 2005 9:28 AM
%ꢎꢉꢋꢖꢇꢋꢖꢊꢌꢎꢃꢊꢑꢉꢙꢊ,ꢆꢇꢃꢋꢌꢉꢌꢇꢅꢋ-&ꢂꢉꢈꢃ
■ ꢌ#ꢉ*#'ꢉ5 "ꢉ,#%!ꢉ , ꢝꢉ()6 $ꢉ#*ꢉ'- ꢉ7#*)'#!ꢉꢝ&! *ꢉ#!ꢉ#" !ꢜ' ꢉ'- ꢉꢝ,ꢝ' 7ꢉ
8-)3 ꢉ$!)9)*+ꢊ
ꢒꢅꢊꢋꢅꢌꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢄꢃꢌꢌꢇꢋꢖꢄꢊꢉꢋꢐꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢈꢅꢂꢉꢌꢇꢅꢋꢄꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊꢑꢇꢋꢇꢕꢇꢏꢃꢊꢌꢎꢃꢊꢌꢇꢕꢃꢊ
ꢄꢙꢃꢋꢌꢊꢛꢇꢃꢗꢇꢋꢖꢊꢌꢎꢃꢊꢕꢅꢋꢇꢌꢅꢆꢊꢄꢂꢆꢃꢃꢋꢊꢉꢋꢐꢊꢈꢇꢄꢌꢃꢋꢇꢋꢖꢊꢌꢅꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊ
,ꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢗꢇꢈꢈꢊꢐꢇꢄꢌꢆꢉꢂꢌꢊꢌꢎꢃꢊꢐꢆꢇꢛꢃꢆꢊꢓꢆꢅꢕꢊꢈꢅꢅ4ꢇꢋꢖꢊꢉꢎꢃꢉꢐꢊꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢉꢋꢐꢊꢕꢉꢔꢊ
ꢂꢉꢍꢄꢃꢊꢉꢋꢊꢉꢂꢂꢇꢐꢃꢋꢌꢘꢊꢁꢈꢗꢉꢔꢄꢊꢄꢌꢅꢙꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢋꢊꢉꢊꢄꢉꢓꢃꢊꢈꢅꢂꢉꢌꢇꢅꢋꢊꢉꢋꢐꢊꢍꢄꢃꢊꢌꢎꢃꢊꢙꢉꢆ4ꢇꢋꢖꢊ2ꢆꢉ4ꢃꢊ
2ꢃꢓꢅꢆꢃꢊꢅꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢘ
ꢀꢁꢂꢃꢄꢃꢅ
●#ꢅꢆꢌꢎꢊ5ꢙꢜꢊ7ꢃꢅꢖꢆꢉꢙꢎꢇꢂꢊꢋꢅꢆꢌꢎꢊꢇꢄꢊꢍꢙꢘ
ꢊ! ꢝꢝꢉ
ENTER
+ꢊ
ꢀꢊ
ꢈ 3 &'ꢉ
"! ꢝꢝꢉ
;ꢉ
ꢉꢜ*$ꢉ
ENTER
ꢔꢜ"ꢉ
#!) *'ꢜ')#*
●ꢓꢋ ꢅꢄꢔꢆꢕꢄꢀꢁꢋꢄꢅꢂꢑꢋꢌꢐꢂꢖꢉꢄꢈꢖꢏꢄ ꢑꢋꢄ
ꢁꢋ ꢅꢂꢉꢊꢄꢂꢃꢄꢏꢆꢒ
●L,,ꢑꢊ,59ꢜꢊ0ꢋꢈꢉꢆꢖꢃꢄꢊꢌꢎꢃꢊꢕꢉꢙꢘ
ZOOM
+ꢊ
●9ꢎꢃꢊꢕꢉꢙꢊꢂꢉꢋꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢇꢋꢊ
+$ꢊꢄꢌꢃꢙꢄꢊꢗꢇꢌꢎꢊꢄꢂꢉꢈꢃꢄꢊꢓꢆꢅꢕꢊ
ꢊꢌꢅꢊ
ꢘ
ZOOM
●L,,ꢑꢊ'#ꢜꢊ8ꢃꢐꢍꢂꢃꢄꢊꢌꢎꢃꢊꢕꢉꢙꢘꢊ
.ꢕꢅꢆꢃꢊꢐꢃꢌꢉꢇꢈꢘ/
ꢔꢜ"ꢉꢝ&ꢜ3
'ꢕꢙꢃꢆꢇꢉꢈꢊꢐꢇꢄꢙꢈꢉꢔ
+ꢀ*ꢊꢕꢇꢊ.ꢕꢇꢈꢃ/
ꢑꢃꢌꢆꢇꢂꢊꢐꢇꢄꢙꢈꢉꢔ
ꢀ ꢝꢊ4ꢕ
+ꢝꢊꢕꢇꢊ.ꢕꢇꢈꢃ/
ꢀꢊꢕꢇꢊ.ꢕꢇꢈꢃ/
$ꢀꢊ4ꢕ
(ꢊ4ꢕ
ꢅꢄꢇꢌꢇꢅꢋ
2ꢃꢓꢅꢆꢃ
ꢂꢎꢉꢋꢖꢃ
+-(ꢊꢕꢇꢊ.ꢕꢇꢈꢃ/
+-$ꢀꢊꢕꢇꢊ.ꢕꢇꢈꢃ/
!!ꢊꢕ
!ꢊꢕ
M&ꢂꢉꢈꢃꢊ2ꢉꢆN
+
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 16 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢅ ꢈꢅꢃꢉꢊ ꢆꢅꢋ ꢌꢇꢍꢃꢁ ꢎꢁꢆꢉꢏꢐ
●=ꢅꢍꢊꢂꢉꢋꢊꢄꢃꢌꢊꢌꢎꢃꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢍꢄꢇꢋꢖꢊꢛꢉꢆꢇꢅꢍꢄꢊꢕꢃꢌꢎꢅꢐꢄꢊꢙꢆꢅꢛꢇꢐꢃꢐꢊ2ꢔꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢘ
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢈ 3 &'ꢉ'- ꢉ$ ꢝ)
ꢀꢁꢀꢂꢃꢄꢀꢅꢆꢄꢀꢇ ꢄ
ꢀꢁꢀꢈ ꢄꢀꢉꢊ
ꢅ" *ꢉ'- ꢉEꢌꢎꢈꢃꢄꢆꢁꢃꢄꢅꢆꢉ
ꢎꢆꢃꢋꢘFꢉꢔ *%
ꢎꢏꢆꢃꢐꢄꢂ
ꢑꢎꢏꢆꢃꢐꢄꢂ
ꢋꢄꢆꢇꢅꢏꢂꢀꢇꢄꢆꢒ
ꢀꢁꢀꢅꢎꢄꢀꢍꢐ
ꢈ 3 &'ꢉ
ꢀꢁꢀꢂꢑꢄꢀꢂꢉꢄꢀꢎꢒꢄ
ꢐ- *ꢉ*ꢜ!!#8)*+ꢉ
$#8*ꢉ'#ꢉ-#%ꢝ ꢉ*#ꢏ
ꢎ*' !ꢉ'- ꢉ
-#%ꢝ ꢉ*#ꢏ
ꢈ 3 &'ꢉ
ꢅ" *ꢉ'- ꢉ
Eꢌꢎꢈꢃꢄꢆꢁꢃꢄꢅꢆꢉ
ꢎꢆꢃꢋꢘFꢉꢔ *%
ꢐ- *ꢉ *' !)*+ꢉ'- ꢉ
ꢝ'! 'ꢉ*ꢜ7 ꢉ$)! &'3,
&ꢃꢈꢃꢂꢌꢊ
ꢎ*' !ꢉ'- ꢉ
ꢝ'! 'ꢉ
*ꢜ7 ꢉꢜ*$ꢉ
ꢝ 3 &'ꢉ
ꢐ- *ꢉ*ꢜ!!#8)*+ꢉ
$#8*ꢉ'#ꢉ&)',ꢉ*ꢜ7
&ꢃꢈꢃꢂꢌꢊ
ꢊꢜꢊ
%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢘ
ꢁ)ꢁ
9v†ƒyh’†ꢁ$ꢁpv‡’ꢁ
h€rꢁyv†‡ꢁ
ꢀꢓꢓꢇꢄꢁꢁ
rhꢀr†‡ꢁ‡urꢁ
pˆꢀꢀr‡ꢁ
ƒ‚†v‡v‚ꢃ
ꢊꢜꢊ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊ
ꢇꢋꢙꢍꢌꢊꢄꢂꢆꢃꢃꢋꢘ
+ꢝ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 17 Friday, July 29, 2005 9:28 AM
● ꢑ ꢆꢄ ꢅꢆꢒꢃꢃꢇꢆꢓ ꢁꢂꢆꢃꢓꢃꢈꢆꢎꢉꢔꢃꢍꢆ ꢄꢆꢅꢕꢃꢆꢊ ꢄꢉꢅ ꢂꢆꢈꢖꢂꢃꢃꢄꢆ ꢂꢆ ꢇꢃꢂꢋꢅꢃꢆꢅꢕꢃꢆꢈꢓꢈꢅꢃꢊꢆꢗꢕꢉꢏꢃꢆꢍꢂꢉꢘꢉꢄꢐꢙ
ꢀꢁꢂꢃꢁꢄꢂꢅꢆꢇꢃ ꢈꢂꢄꢆꢈꢂꢉꢈꢄꢄꢊꢃ ꢉꢂꢇꢃꢋꢂꢋꢈꢉꢄꢊꢃꢇꢄꢊꢁꢃꢂꢌꢁꢅꢇꢄꢊꢁꢃꢉꢂꢍꢆꢊꢌꢈꢂꢋꢎꢊꢏꢊꢃ ꢐꢂꢑꢊꢃꢊꢒꢊꢓꢈꢂꢄꢆꢈꢂꢄꢊꢒꢈꢂꢉꢔꢈꢃꢄꢂ
ꢏꢊꢈꢍꢊꢃ ꢂꢄꢆꢈꢂꢒꢁꢃꢊꢄꢁꢎꢂꢉꢅꢎꢈꢈꢃꢂꢇꢃꢋꢂꢌꢊꢉꢄꢈꢃꢊꢃ ꢂꢄꢁꢂꢄꢆꢈꢂꢏꢁꢊꢅꢈꢂ ꢕꢊꢋꢇꢃꢅꢈꢂꢍꢆꢊꢌꢈꢂꢋꢎꢊꢏꢊꢃ ꢐꢂꢖꢔꢈꢎꢇꢄꢊꢃ ꢂꢄꢆꢈꢂꢉꢗꢉꢄꢈꢒꢂ
ꢍꢊꢌꢌꢂꢋꢊꢉꢄꢎꢇꢅꢄꢂꢄꢆꢈꢂꢋꢎꢊꢏꢈꢎꢂꢘꢎꢁꢒꢂꢌꢁꢁꢙꢊꢃ ꢂꢇꢆꢈꢇꢋꢂꢁꢘꢂꢄꢆꢈꢂꢏꢈꢆꢊꢅꢌꢈꢂꢇꢃꢋꢂꢒꢇꢗꢂꢅꢇꢕꢉꢈꢂꢇꢃꢂꢇꢅꢅꢊꢋꢈꢃꢄꢐꢂꢚꢌꢍꢇꢗꢉꢂꢉꢄꢁꢔꢂ
ꢄꢆꢈꢂꢏꢈꢆꢊꢅꢌꢈꢂꢊꢃꢂꢇꢂꢉꢇꢘꢈꢂꢌꢁꢅꢇꢄꢊꢁꢃꢂꢛꢈꢘꢁꢎꢈꢂꢁꢔꢈꢎꢇꢄꢊꢃ ꢂꢄꢆꢈꢂꢉꢗꢉꢄꢈꢒꢐ
ꢀꢁꢂꢃꢄꢃꢅꢆ
● ꢀꢁꢂꢃꢄꢅꢆꢄꢇ ꢈꢉꢄꢆꢅꢊꢋꢃꢉꢅꢃꢉꢄꢅꢌꢇꢍꢋꢎꢇꢃꢋꢁꢌꢅꢆꢏꢆꢃꢄꢐꢅꢈꢇꢌꢅꢋꢌꢈꢑꢂꢒꢄꢅ ꢁꢇꢒꢆꢅꢃꢉꢇꢃꢅꢏꢁꢂꢅꢈꢇꢌꢅꢌꢁꢃꢅꢒ ꢋꢍꢄꢅꢁꢌꢅꢇꢌꢒꢅ ꢁꢇꢒꢆꢅꢃꢉꢇꢃꢅ
ꢏꢁꢂꢅꢇ ꢄꢅꢓ ꢁꢉꢋꢔꢋꢃꢄꢒꢅꢕ ꢁꢐꢅꢒ ꢋꢍꢋꢌꢎꢅꢁꢌꢅꢒꢂꢄꢅꢃꢁꢅꢃ ꢇꢕꢕꢋꢈꢅ ꢄꢎꢂꢑꢇꢃꢋꢁꢌꢆꢖꢅꢗꢑꢄꢇꢆꢄꢅꢈꢁꢐꢓꢑꢏꢅꢊꢋꢃꢉꢅꢃꢉꢄꢅꢃ ꢇꢕꢕꢋꢈꢅ ꢄꢎꢂꢑꢇꢃꢋꢁꢌꢆꢖ
ꢈ 3 &'ꢉ'- ꢉ$ ꢝ)! $ꢉꢈ ꢜ!&-ꢉꢁ! ꢜ
ꢀꢁꢀꢂꢃꢄꢀꢅꢆꢄꢀꢇ ꢄ
ꢀꢁꢀꢈ ꢄꢀꢉꢊ
ꢀꢁꢀ ꢋꢄꢀꢈꢅꢄꢀꢌꢍꢄꢀꢉꢌꢄꢀꢖꢍꢄꢀꢇꢒ
ꢀꢁꢀꢂ ꢄꢀꢎꢏꢄꢀꢌꢉꢄꢀꢌꢅꢄꢀꢉꢃꢄꢀꢉꢓꢄꢀꢏꢃ
ꢀꢁꢀꢅꢎꢄꢀꢍꢐ
ꢀꢁꢀ ꢆꢄꢀ ꢑꢄꢀꢑ ꢄꢀꢌꢏꢄꢀꢍꢉ
ꢀꢁꢀꢈꢍꢄꢀꢌ ꢄꢀꢌꢓꢄꢀꢉꢔꢄꢀꢉꢕꢄꢀꢉꢒꢄꢀꢆꢂꢄꢀꢊꢍ
ꢀꢁꢀꢃꢈꢄꢀꢃꢓꢄꢀꢌꢃꢄꢀꢗ ꢄꢀꢊ ꢄꢀꢇꢊ
ꢀꢁꢀꢘꢑꢄꢀꢙ ꢄꢀꢉꢈꢄꢀꢏꢈ
ꢌꢎꢈꢃꢄꢆꢁꢃꢄꢅꢆꢉꢎꢆꢃꢋꢘꢉꢔ *%ꢉ
ꢝ&! *ꢉꢜ"" ꢜ!ꢝ
ꢈ 3 &'ꢉ
ꢀꢁꢀꢈ ꢉ ꢃ
ꢀꢁꢀꢂꢑꢄꢀꢂꢉꢄꢀꢎꢒꢄꢀꢌꢂꢄꢀꢅꢔꢄꢀꢇꢂ
ꢉ*ꢜ!!#8)*+ꢉ
'#ꢉ-#%ꢝ ꢉ*#ꢏ
ꢎ*' !ꢉ'- ꢉ
-#%ꢝ ꢉ*#ꢏ
ꢈꢉꢑꢉꢚꢅ
!ꢇꢅꢉꢖ ꢅ"ꢉ ꢓꢅꢖꢉꢉꢅ
ꢇꢁꢕꢉ ꢁꢇꢝ ꢓꢉꢑꢉꢚꢅ
ꢈ 3 &'ꢉ'- ꢉꢝ'! 'ꢉ*ꢜ7 ꢉ
(!#7ꢉ'- ꢉ3)ꢝ'
ꢜꢃꢖꢉꢚꢅ
ꢝꢉꢓꢅꢃꢇꢁꢅꢃ
ꢆꢇ ꢃꢇꢋ#ꢅ
ꢗꢄ
ꢆ ꢊꢋꢄꢘꢙꢚ
ꢄ
ꢉ *' !)*+ꢉ'- ꢉ
'ꢉ*ꢜ7 ꢉ$)! &'3,
ꢎ*' !ꢉ'- ꢉ
ꢝ'! 'ꢉ
*ꢜ7 ꢉꢜ*$ꢉ
ꢝ 3 &'ꢉ
ꢈ 3 &'ꢉ'- ꢉ
ꢝ'! 'ꢉ*ꢜ7 ꢉ
(!#7ꢉ'- ꢉ3)ꢝ'
!ꢇꢅꢉꢖ
ꢅ"ꢉ
"ꢆ#ꢓꢉ
ꢇꢆ$
ꢈꢉꢑꢉꢚꢅ
ꢉ*ꢜ!!#8)*+ꢉ
'#ꢉ&)',ꢉ*ꢜ7
ꢊꢜꢊ
%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢘ
ꢈꢉꢑꢉꢚꢅ
ꢅ"ꢉ
ꢚꢃꢅꢔ
ꢇꢁꢕꢉ
%ꢖꢆꢕ
ꢅ"ꢉ
!ꢇꢅꢉꢖ
ꢅ"ꢉ
"ꢆ#ꢓꢉ
ꢇꢆ$
ꢈꢉꢑꢉꢚꢅ
!ꢇꢅꢉꢖ
ꢅ"ꢉ
ꢓꢅꢖꢉꢉꢅ
ꢇꢁꢕꢉ
ꢁꢇꢝ
ꢈꢉꢑꢉꢚꢅ
ꢅ"ꢉ
ꢓꢅꢖꢉꢉꢅ
ꢇꢁꢕꢉ
%ꢖꢆꢕ
ꢅ"ꢉ
ꢁ)ꢁ
9v†ƒyh’†ꢁ$ꢁpv‡’ꢁ
h€rꢁyv†‡ꢁ
rhꢀr†‡ꢁ‡urꢁ
pˆꢀꢀr‡ꢁ
ƒ‚†v‡v‚ꢃ
ꢓꢉꢑꢉꢚꢅ
ꢑꢃꢓꢅ
ꢑꢃꢓꢅ
!ꢇꢅꢉꢖ
ꢅ"ꢉ
ꢚꢃꢅꢔ
ꢇꢁꢕꢉ
ꢁꢇꢝ
ꢓꢉꢑꢉꢚꢅ
ꢈꢉꢑꢉꢚꢅ
ꢅ"ꢉ
ꢚꢃꢅꢔ
ꢇꢁꢕꢉ
%ꢖꢆꢕ
ꢅ"ꢉ
ꢊꢜꢊ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊ
!ꢇꢅꢉꢖ
ꢅ"ꢉ
"ꢆ#ꢓꢉ
ꢇꢆ$
ꢈꢉꢑꢉꢚꢅ
!ꢇꢅꢉꢖ
ꢅ"ꢉ
ꢓꢅꢖꢉꢉꢅ
ꢇꢁꢕꢉ
ꢁꢇꢝ
ꢈꢉꢑꢉꢚꢅ ꢅ"ꢉ
ꢓꢅꢖꢉꢉꢅ
ꢇꢁꢕꢉ %ꢖꢆꢕ
ꢅ"ꢉ ꢑꢃꢓꢅ
ꢁ)ꢁ
Trhꢀpuꢁ
sꢀ‚€ꢁ
‡urꢁ
€hƒꢃ
ꢇꢋꢙꢍꢌꢊꢄꢂꢆꢃꢃꢋꢘ
ꢑꢃꢓꢅ
ꢓꢉꢑꢉꢚꢅ
● )ꢅꢆꢊ%ꢎꢉꢆꢉꢂꢌꢃꢆꢊ0ꢋꢌꢆꢔ>ꢊꢙꢈꢃꢉꢄꢃꢊꢆꢃꢓꢃꢆꢊꢌꢅꢊꢙꢉꢖꢃꢊꢀ$ꢘ
+C
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 18 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢅ ꢈꢅꢃꢉꢊ ꢆꢅꢋ ꢌꢇꢍꢃꢁ ꢎꢁꢆꢉꢏꢐ
ꢐ- *ꢉ *' !)*+ꢉ
'- ꢉ$ ꢝ')*ꢜ')#*ꢉ
"#)*'ꢉ$)! &'3,
ꢈ 3 &'ꢉ
ꢅ" *ꢉ'- ꢉ
Eꢌꢎꢈꢃꢄꢆꢁꢃꢄꢅꢆꢉ
ꢎꢆꢃꢋꢘFꢉꢔ *%
ꢐ- *ꢉ
ꢈ 3 &'ꢉ'- ꢉ
&ꢜ' +#!,ꢉ
*ꢜ7 ꢉ(!#7ꢉ
'- ꢉ3)ꢝ'
*ꢜ!!#8)*+ꢉ$#8*ꢉ
'#ꢉ&ꢜ' +#!,ꢉ
*ꢜ7
&ꢃꢈꢃꢂꢌꢊ
ꢐ- *ꢉ
ꢊꢜꢊ
%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢘ
*ꢜ!!#8)*+ꢉ$#8*ꢉ
'#ꢉ&)',ꢉ*ꢜ7
&ꢃꢈꢃꢂꢌꢊ
ꢔꢊꢕꢃꢌꢂꢊꢉꢂ
ꢕꢃꢌꢄꢇꢄꢁꢌ
ꢊꢜꢊ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊ ꢊ
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊꢈꢇꢄꢌꢊ
ꢋꢃꢉꢆꢃꢄꢌꢊꢌꢎꢃꢊ
ꢂꢍꢆꢆꢃꢋꢌꢊ
ꢙꢅꢄꢇꢌꢇꢅꢋꢘ
ꢊꢜꢊ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊ
ꢇꢋꢙꢍꢌꢊꢄꢂꢆꢃꢃꢋꢘ
ꢐ- *ꢉꢝ'#"" $
ꢈ 3 &'ꢉ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊꢙꢅꢈꢇꢂꢃꢊ
ꢄꢌꢉꢌꢇꢅꢋꢊꢄꢃꢈꢃꢂꢌꢊ
ꢄꢂꢆꢃꢃꢋꢘ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ
ꢎꢅꢄꢙꢇꢌꢉꢈꢊꢄꢃꢈꢃꢂꢌꢊ
ꢄꢂꢆꢃꢃꢋꢘ
.ꢚꢎꢃꢋꢊꢄꢌꢅꢙꢙꢃꢐ/
ꢖꢗꢄꢇꢐꢄꢃꢅ
ꢐ- *ꢉ$!)9)*+
ꢑ ꢒꢅꢄꢒꢓ ꢄꢉ ꢅꢒꢊꢈꢂꢒꢊꢍꢈꢄ
ꢒꢍꢄꢒꢓ ꢄꢈ ꢂꢇ ꢅꢒꢄꢋꢍꢃꢊꢆ ꢄ
ꢅꢒꢂꢒꢊꢍꢈꢄꢂꢁꢒꢍꢏꢂꢒꢊꢆꢂꢃꢃꢌꢐ
ꢀꢁꢂꢃꢄꢂꢅꢁꢄꢆꢁꢃꢂꢇ ꢈꢂꢇꢉ ꢄꢂꢉꢄ
ꢂꢅꢁꢄ ꢁꢈꢊꢁꢃꢂꢄꢅꢉꢃꢋꢇꢂꢈꢌꢄ
ꢈꢍꢂꢉꢎꢈꢂꢇꢏꢈꢌꢌꢐꢑ
+*
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 19 Friday, July 29, 2005 9:28 AM
ꢐ- *ꢉ *' !)*+ꢉ
- ꢉ$ ꢝ')*ꢜ')#*ꢉ
"#)*'ꢉ$)! &'3,
ꢀꢁꢂꢃꢄꢅꢂꢆꢃꢅ
ꢇꢃ ꢂꢈꢁꢉꢂꢈꢊꢁꢅ
ꢋꢊꢈꢁꢂꢅꢉꢁꢇꢅ
ꢈ 3 &'ꢉ'- ꢉ
*ꢜ7 ꢉ
(!#7ꢉ'- ꢉ
3)ꢝ'
ꢃꢌꢃꢍꢂꢅ
ꢐ- *ꢉ
ꢈ 3 &'ꢉ'- ꢉ
*ꢜ!!#8)*+ꢉ$#8*ꢉ
#ꢉ&ꢜ' +#!,ꢉ
*ꢜ7
&ꢜ' +#!,ꢉ
*ꢜ7 ꢉ(!#7ꢉ
'- ꢉ3)ꢝ'
&ꢃꢈꢃꢂꢌꢊ
ꢐ- *ꢉ
ꢌ)! &'ꢉ
$ ꢝ')*ꢜ')#*ꢉ
)*"%'
ꢊꢜꢊ
%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢘ
*ꢜ!!#8)*+ꢉ$#8*ꢉ
#ꢉ&)',ꢉ*ꢜ7
&ꢃꢈꢃꢂꢌꢊ
ꢗꢄ
ꢄꢆ ꢊꢋꢄꢘꢙꢚ
ꢈ 3 &'ꢉ
'- ꢉ&)',ꢉ
ꢊꢜꢊ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊ ꢊ
*ꢜ7 ꢉ
(!#7ꢉ'- ꢉ
3)ꢝ'
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊꢈꢇꢄꢌꢊ
ꢋꢃꢉꢆꢃꢄꢌꢊꢌꢎꢃꢊ
ꢂꢍꢆꢆꢃꢋꢌꢊ
ꢙꢅꢄꢇꢌꢇꢅꢋꢘ
ꢎ*' !ꢉ
'- ꢉ&)',ꢉ
*ꢜ7 ꢉ
ꢜ*$ꢉ
&ꢃꢈꢃꢂꢌꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊ
ꢓꢆꢅꢕꢊꢌꢎꢃꢊ
ꢈꢇꢄꢌ
ꢊꢜꢊ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ
ꢂꢇꢌꢔꢊꢋꢉꢕꢃꢊ
ꢇꢋꢙꢍꢌꢊꢄꢂꢆꢃꢃꢋꢘ
ꢝ 3 &'ꢉ
ꢐ- *ꢉꢝ'#"" $
ꢈ 3 &'ꢉ'- ꢉꢝ#!'ꢉ7 '-#$ꢝ
ꢈ 3 &'ꢉ'- ꢉ*ꢜ7 ꢉ(!#7ꢉ
'- ꢉ3)ꢝ'
ꢊꢜꢊ&ꢅꢆꢌꢄꢊꢌꢎꢃꢊꢙꢅꢈꢇꢂꢃꢊ
ꢄꢌꢉꢌꢇꢅꢋꢊꢅꢆꢊꢌꢎꢃꢊꢎꢅꢄꢙꢇꢌꢉꢈꢊ2ꢔꢊ
ꢒꢇꢄꢌꢉꢋꢂꢃꢘ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊꢙꢅꢈꢇꢂꢃꢊ
ꢌꢉꢌꢇꢅꢋꢊꢄꢃꢈꢃꢂꢌꢊ
ꢂꢆꢃꢃꢋꢘ
ꢊꢜꢊ&ꢅꢆꢌꢄꢊꢌꢎꢃꢊꢙꢅꢈꢇꢂꢃꢊ
ꢄꢌꢉꢌꢇꢅꢋꢊꢅꢆꢊꢌꢎꢃꢊꢎꢅꢄꢙꢇꢌꢉꢈꢊ2ꢔꢊ
ꢋꢉꢕꢃꢘ
ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ
ꢅꢄꢙꢇꢌꢉꢈꢊꢄꢃꢈꢃꢂꢌꢊ
ꢂꢆꢃꢃꢋꢘ
ꢐ- *ꢉ$!)9)*+
ꢒꢅꢄꢒꢓ ꢄꢉ ꢅꢒꢊꢈꢂꢒꢊꢍꢈꢄ
ꢍꢄꢒꢓ ꢄꢈ ꢂꢇ ꢅꢒꢄꢋꢍꢃꢊꢆ ꢄ
ꢒꢂꢒꢊꢍꢈꢄꢂꢁꢒꢍꢏꢂꢒꢊꢆꢂꢃꢃꢌꢐ
ꢁꢂꢃꢄꢂꢅꢁꢄꢆꢁꢃꢂꢇ ꢈꢂꢇꢉ ꢄꢂꢉꢄ
ꢅꢁꢄ ꢁꢈꢊꢁꢃꢂꢄꢅꢉꢃꢋꢇꢂꢈꢌꢄ
ꢍꢂꢉꢎꢈꢂꢇꢏꢈꢌꢌꢐꢑ
● )ꢅꢆꢊ%ꢎꢉꢆꢉꢂꢌꢃꢆꢊ0ꢋꢌꢆꢔ>ꢊꢙꢈꢃꢉꢄꢃꢊꢆꢃꢓꢃꢆꢊꢌꢅꢊꢙꢉꢖꢃꢊꢀ$ꢘ
+E
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 20 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢅ ꢈꢅꢃꢉꢊ ꢆꢅꢋ ꢌꢇꢍꢃꢁ ꢎꢁꢆꢉꢏꢐ
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢈ 3 &'ꢉ'- ꢉ
&ꢜ' +#!,ꢉ(#!ꢉ'-
$ ꢝ)! $ꢉꢉꢔ 7#
ꢊ#)*'
ꢈ 3 &'ꢉ
ꢅ" *ꢉ'- ꢉ
Eꢌꢎꢈꢃꢄꢆꢁꢃꢄꢅꢆꢉ
ꢎꢆꢃꢋꢘFꢉꢔ *%
ꢘꢄꢗꢊꢇ ꢂꢔꢊꢕꢃꢌ
ꢈ 3 &'ꢉ
ꢈ 3 &'ꢉ
ꢙꢊꢗꢄ
ꢈ 3 &'ꢉ'- ꢉ$ ꢝ)
ꢀꢁꢂꢃꢂꢄꢅꢆꢂꢃꢄꢇ ꢈꢄꢇꢉ
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢂꢇꢉꢄꢊꢋꢉꢄꢅꢊ
ꢚꢃꢌꢄꢇꢁꢄꢅꢌꢕꢊꢃ
ꢈ 3 &'ꢉ
ꢈ 3 &'ꢉ
ꢎ*' !ꢓꢈ 3 &'ꢉ'-
ꢎ*' !ꢓꢈ 3 &'ꢉ'-
*ꢜ7 ꢉ#(ꢉ'- ꢉ
(! 8ꢜ,ꢉ
ꢈ 3 &'ꢉ
ꢊ
ꢛꢇꢄꢄꢜꢆ ꢂꢝꢃ
ꢝꢉꢉꢂ!ꢆꢗꢍ
ꢈ 3 &'ꢉ
ꢈ 3 &'ꢉ
ꢊ
ꢔꢏꢊꢃꢄꢂꢃ"ꢗ#ꢄꢇ
ꢎ*' !ꢉ'- ꢉ3ꢜ')'%
ꢈ 3 &'ꢉ
ꢊ
ꢜ ꢐꢃꢖꢆꢃꢃꢄ
ꢎꢊꢊꢇꢓꢕꢃꢆꢌꢄꢁ
ꢜ ꢕꢇꢋꢍꢌꢃꢄ
ꢜ ꢄꢃꢂꢅꢋꢐꢄ
ꢋꢄ$ꢄꢅꢌꢂꢉꢇꢊꢗꢂ
ꢗꢆꢍ
ꢈ 3 &'ꢉ
ꢀ!
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 21 Friday, July 29, 2005 9:28 AM
ꢈ 3 &'ꢉ'- ꢉ
ꢈ 3 &'ꢉ'- ꢉ$ ꢝ)! $ꢉꢔ 7#!,ꢉꢊ#)*'
ꢊꢜꢊꢒꢇꢄꢙꢈꢉꢔꢊꢍꢙꢊꢌꢅꢊꢓꢇꢛꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊꢄꢍꢖꢖꢃꢄꢌꢇꢅꢋꢄꢘ
ꢊꢜꢊꢒꢇꢄꢙꢈꢉꢔꢊꢌꢎꢃꢊꢓꢇꢛꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊꢄꢍꢖꢖꢃꢄꢌꢇꢅꢋꢄꢘ
&ꢜ' +#!,ꢉ(#!ꢉ'- ꢉ
$ ꢝ)! $ꢉꢉꢔ 7#!,ꢉ
ꢊ#)*'
ꢁ)ꢁUurꢁ‚ꢀqrꢀꢁ‚sꢁ‡urꢁqv†ƒyh’rqꢁyv†‡ꢁphꢁirꢁpuhtrqꢃ
ꢈ 3 &'ꢉ'- ꢉ$ ꢝ)! $ꢉꢊ! ꢝ 'ꢉꢌ ꢝ')*ꢜ')#*ꢏ
ꢈ 3 &'ꢉ'- ꢉꢊ! 9)#%ꢝꢉꢌ ꢝ')*ꢜ')#*ꢏ
ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢅꢁꢈꢉꢅꢁꢊꢈꢆ
ꢁꢈꢋꢌꢅ
ꢎ*' !ꢓꢈ 3 &'ꢉ'- ꢉ
.ꢝ'ꢉꢝ'! 'ꢉ*ꢜ7
ꢎ*' !ꢓꢈ 3 &'ꢉ'- ꢉ0*$ꢉ
ꢝ'! 'ꢉ*ꢜ7
.ꢊ
ꢊꢙꢉꢖꢃꢊꢀ(/
ꢎ*' !ꢓꢈ 3 &'ꢉ'- ꢉ
*ꢜ7 ꢉ#(ꢉ'- ꢉ
(! 8ꢜ,ꢉ
ꢈ 3 &'ꢉ'- ꢉ
$ ꢝ)! $ꢉ'- ꢉ
ꢅ*ꢉꢋꢜ7"ꢉ#!ꢉ
'- ꢉꢅ((ꢉꢋꢜ7"ꢉ
*ꢜ7 ꢏ
ꢈ 3 &'ꢉꢉ
ꢉ#!ꢉ
ꢈ 3 &'ꢉ'- ꢉ"-#* ꢉ
*%7: !
ꢈ 3 &'ꢉ
ꢊ
ꢎ*' !ꢉ'- ꢉ3ꢜ')'%$
ꢎ*' !ꢉ'- ꢉ3#*+)'%$
ꢈ 3 &'ꢉ
ꢜ ꢐꢃꢖꢆꢃꢃꢄ
ꢜ ꢕꢇꢋꢍꢌꢃꢄ
ꢜ ꢄꢃꢂꢅꢋꢐꢄ
● )ꢅꢆꢊ%ꢎꢉꢆꢉꢂꢌꢃꢆꢊ0ꢋꢌꢆꢔ>ꢊꢙꢈꢃꢉꢄꢃꢊꢆꢃꢓꢃꢆꢊꢌꢅꢊꢙꢉꢖꢃꢊꢀ$ꢘ
ꢀ+
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 22 Friday, July 29, 2005 9:28 AM
●=ꢅꢍꢊꢂꢉꢋꢊꢄꢃꢈꢃꢂꢌꢊꢅꢋꢃꢊꢅꢓꢊꢌꢎꢃꢊꢄꢇ;ꢊ
ꢂꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊꢅꢋꢊꢌꢎꢃꢊꢕꢃꢋꢍꢊꢅꢆꢊ"ꢇꢄꢌꢊ
%ꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊꢉꢋꢐꢊꢌꢎꢃꢋꢊꢄꢃꢈꢃꢂꢌꢊꢌꢎꢃꢊ ,'.ꢄ/ꢊ
ꢌꢅꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢅꢋꢊꢌꢎꢃꢊꢕꢉꢙꢘ
ꢀꢁꢂꢃꢄꢅꢆ
ENTER
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢇ
ꢊꢊ
ꢊ ꢁꢈꢁꢂꢉꢇ
ꢈ 3 &'ꢉ'- ꢉ
ꢅ" *ꢉ'- ꢉ
Eꢛꢂꢄꢀ<ꢉꢊꢅꢄF
&ꢜ' +#!) ꢝꢉ'#ꢉ: ꢉ
$)ꢝ"3ꢜ, $ꢉ%"ꢉ'#ꢉꢜꢉ
7ꢜ6)7%7ꢉ#(ꢉ()9 ꢏ
●
,'ꢊꢇꢂꢅꢋꢊꢂꢎꢉꢆꢌꢊ
ꢊꢙꢉꢖꢃꢊꢀ /
ꢌ)ꢝ"3ꢜ,)*+ꢉ
ꢊꢅꢄ=ꢝ>ꢉ#*ꢉꢜꢉ
ꢔꢜ"
.ꢊ
)ꢅꢆꢊꢂꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊ
ꢅꢌꢎꢃꢆꢊꢌꢎꢉꢋꢊꢌꢎꢃꢊꢄꢇ;ꢊ
ꢐꢇꢄꢙꢈꢉꢔꢃꢐ>ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊꢉꢋꢐꢊ
ꢄꢃꢈꢃꢂꢌꢊꢌꢎꢃꢕꢊꢓꢆꢅꢕꢊ
ꢌꢎꢃꢊꢈꢇꢄꢌꢊꢄꢎꢅꢗꢋꢘ
ꢈ 3 &'ꢉ'- ꢉꢊꢅꢄꢉ
,#%ꢉ8ꢜ*'ꢉ'#ꢉ()*$ꢉ
(!#7ꢉ'- ꢉ3)ꢝ' $ꢉ
&ꢜ' +#!) ꢝꢏ
ꢛꢜꢐꢋꢑꢄꢈꢖꢏꢄꢝ ꢋꢄ ꢄ
ꢃꢋꢇꢋꢌꢐꢂꢖꢉ!ꢄꢐꢁꢋꢄꢆꢖꢂꢉꢐꢄꢖꢜꢄ
ꢂꢉꢐꢋꢑꢋꢃꢐꢄꢈꢖꢏꢄꢃꢋꢇꢋꢌꢐꢋꢅꢄ
ꢆꢆꢋ ꢑꢃꢄꢖꢉꢄꢐꢁꢋꢄꢝ ꢆꢒ
ꢕꢄ"ꢋ ꢑꢌꢁꢄ#$%ꢄ
ꢍ#&ꢜ3ꢉ
ꢈ ꢜ!&-
ꢇꢖꢉꢊꢄꢐꢁꢋꢄꢑꢖꢏꢐꢋꢄ
ꢅꢏꢑꢂꢉꢊꢄꢐꢁꢋꢄꢊꢏꢂꢅ ꢉꢌꢋꢄ
ꢉꢅꢄꢃꢁꢖ&ꢄꢐꢁꢋꢄꢇꢂꢃꢐꢒ
ꢌ 3 ')*+ꢉ
ꢊꢅꢄꢉ
ꢔꢜ!5 !ꢝ
ꢊꢋꢃꢌꢈꢄꢆꢋꢀꢍꢇꢎꢏꢐꢑꢃꢒꢇꢓꢀꢇꢄꢇꢔꢄꢌꢇꢑ ꢇꢉ2ꢅꢛꢃꢒ
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢌ)ꢝ"3ꢜ,ꢉ'- ꢉꢊꢅꢄꢏꢉ
ꢚꢃꢏꢃꢖꢅꢆꢅꢕꢃꢆꢍꢃꢈꢉꢂꢃꢍꢆ
ꢛꢜꢝꢆ ꢓꢆꢊ ꢘꢉꢄꢐꢆ ꢆ ꢄꢆ
ꢅ ꢇꢆ ꢎꢆꢅꢕꢃꢆꢛꢜꢝꢆꢉꢖ ꢄꢙ
ꢘꢉꢄꢅꢌꢇꢐꢄꢅꢁꢕꢅꢃꢉꢄꢅꢆꢄꢑꢄꢈꢃꢄꢒꢅ
ꢗꢙꢚꢅꢇꢓꢓꢄꢇ ꢆꢖ
ꢚꢕꢅꢌꢁꢅꢒꢇꢃꢇꢅꢋꢆꢅꢆꢃꢁ ꢄꢒꢅꢕꢁ ꢅꢃꢉꢄꢅ
ꢆꢄꢑꢄꢈꢃꢄꢒꢅꢗꢙꢚꢛꢅꢃꢉꢄꢅꢗꢙꢚꢅ
ꢌꢇꢐꢄꢅꢋꢆꢅꢌꢁꢃꢅꢒꢋꢆꢓꢑꢇꢏꢄꢒꢖ
ꢈ 3 &'ꢉ
ꢉ
=ꢄ*(#!7ꢜ')#*>
9ꢎꢃꢊ ,'.ꢄ/ꢊꢐꢉꢌꢉꢊꢇꢄꢊ
ꢐꢇꢄꢙꢈꢉꢔꢃꢐꢘ
ꢈ-#8)*+ꢉ
ꢊꢅꢄꢉꢌꢜ'ꢜ
ꢊꢜ &ꢌꢅꢆꢃꢄꢊꢌꢎꢃꢊ
ꢈꢅꢂꢉꢌꢇꢅꢋꢊꢅꢓꢊ
,'ꢊꢉꢄꢊꢉꢊ
ꢕꢃꢕꢅꢆꢔꢊ
ꢙꢅꢇꢋꢌꢘ
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 23 Friday, July 29, 2005 9:28 AM
%ꢎꢉꢆꢉꢂꢌꢃꢆꢊ0ꢋꢌꢆꢔ
ꢈ 3 &'ꢉ'- ꢉ()!ꢝ'ꢉꢝ 9 !ꢜ3ꢉ
&-ꢜ!ꢜ&' !ꢝꢉ#*ꢉ'- ꢉꢝ&! *ꢏ
ꢈ 3 &'ꢉ,#%!ꢉ'ꢜ!+ 'ꢉ
)*ꢉ'- ꢉ3)ꢝ'ꢏ
ꢜꢇꢒꢈꢉꢂꢁꢘꢂꢍꢆꢊꢅꢆꢂꢉꢔꢈꢌꢌꢊꢃ ꢂꢉꢄꢇꢎꢄꢉꢂ
ꢍꢊꢄꢆꢂꢄꢆꢈꢂꢈꢃꢄꢈꢎꢈꢋꢂꢅꢆꢇꢎꢇꢅꢄꢈꢎꢂꢇꢔꢔꢈꢇꢎꢐ
●'ꢓꢊꢉꢊꢐꢃꢄꢇꢆꢃꢐꢊꢋꢉꢕꢃꢊꢇꢄꢊꢋꢅꢌꢊꢇꢋꢊ
ꢌꢎꢃꢊꢈꢇꢄꢌ>ꢊꢖꢅꢊ2ꢉꢂ4ꢊꢌꢅꢊꢌꢎꢃꢊꢄꢌꢃꢙꢊ+>ꢊ
ꢉꢋꢐꢊꢌꢆꢔꢊꢓꢃꢗꢃꢆꢊꢂꢎꢉꢆꢉꢂꢌꢃꢆꢄꢘ
ꢀꢁꢂꢁꢃꢄꢅ
ꢀꢁꢂꢁꢃꢄꢅ
ꢀꢁꢂꢁꢃꢄꢅ
ꢊꢜ ꢒꢇꢄꢙꢈꢉꢔꢊꢍꢙꢊꢌꢅꢊꢓꢇꢛꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊ
ꢄꢍꢖꢖꢃꢄꢌꢇꢅꢋꢄꢘ
ꢀꢁꢂꢁꢃꢄꢅ
ꢊꢜ ꢒꢇꢄꢙꢈꢉꢔꢊꢌꢎꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊ
ꢄꢍꢖꢖꢃꢄꢌꢇꢅꢋꢄꢘ
ꢊꢜ 9ꢃ;ꢌꢊꢓꢈꢅꢗꢊ.8ꢇꢖꢎꢌ/
ꢊꢜ 9ꢃ;ꢌꢊꢓꢈꢅꢗꢊ."ꢃꢓꢌ/
ꢃ#ꢉ *' !ꢉ
'- ꢉꢝ'! 'ꢉ
*ꢜ7 ;ꢉ&)',ꢉ
*ꢜ7 ;ꢉꢜ*$ꢉ
#'- !ꢏ
ꢊꢜ ꢘꢉꢄꢅꢁ ꢒꢄ ꢅꢁꢕꢅꢃꢉꢄꢅꢒꢋꢆꢓꢑꢇꢏꢄꢒꢅꢑꢋꢆꢃꢅ
ꢈꢇꢌꢅꢔꢄꢅꢈꢉꢇꢌꢎꢄꢒꢖꢅꢜꢝꢋꢆꢓꢑꢇꢏꢄꢒꢅ
ꢑꢋꢆꢃꢅꢍꢇ ꢋꢄꢆꢅꢁ ꢅ ꢅꢐꢇꢏꢅꢌꢁꢃꢅꢔꢄꢅ
ꢒꢋꢆꢓꢑꢇꢏꢄꢒꢅꢒꢄꢓꢄꢌꢒꢋꢌꢎꢅꢁꢌꢅꢊꢉꢇꢃꢅ
ꢊꢇꢆꢅꢋꢌꢓꢂꢃꢖ ꢀ
ꢊꢜ ꢑꢅꢛꢃꢊꢌꢎꢃꢊꢂꢍꢆꢄꢅꢆꢊꢌꢅꢊꢌꢎꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊ
ꢙꢅꢄꢇꢌꢇꢅꢋꢊꢉꢋꢐꢊꢐꢃꢈꢃꢌꢃꢊꢉꢊꢂꢎꢉꢆꢉꢂꢌꢃꢆꢘꢊ
ꢉꢇꢉꢃ- ꢉ3)ꢝ'ꢉꢜ"" ꢜ!ꢝꢏ
ꢊꢜ 9ꢃ;ꢌꢊꢂꢉꢋꢊ2ꢃꢊꢇꢋꢙꢍꢌꢊꢉꢖꢉꢇꢋꢘꢊ
.
ꢊꢕꢉꢔꢊꢋꢅꢌꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊ
ꢐꢃꢙꢃꢋꢐꢇꢋꢖꢊꢅꢋꢊꢗꢎꢉꢌꢊꢗꢉꢄꢊ
ꢇꢋꢙꢍꢌꢘꢊ ꢊꢕꢉꢔꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊ
ꢗꢎꢃꢋꢊ ꢊꢇꢄꢊꢄꢃꢈꢃꢂꢌꢃꢐꢘ/
●0;ꢉꢕꢙꢈꢃꢄ
ꢈ'! 'ꢇꢉꢁꢆꢒꢎꢋꢚ
0ꢋꢌꢃꢆꢊ2ꢔꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢂꢎꢉꢆꢉꢂꢌꢃꢆꢄꢜ
?
ꢈ'! 'ꢇꢉꢈꢃꢋꢁꢈꢈꢎꢉꢌꢎꢈꢉ.?ꢏꢉꢉꢙꢂꢆꢄ
0ꢋꢌꢃꢆꢊ2ꢔꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢂꢎꢉꢆꢉꢂꢌꢃꢆꢄꢜ
ꢁ #
ꢈ'! 'ꢇꢉꢁꢀ ꢁꢃꢐꢎꢚ
0ꢋꢌꢃꢆꢊ2ꢔꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢂꢎꢉꢆꢉꢂꢌꢃꢆꢄꢜ
ꢒ 0 &
+ C
?
ꢁ % 1 ꢁ 9
ꢌꢄꢍꢄꢎꢃꢅꢃꢏꢄꢅꢎꢏꢐꢑꢐꢎꢃꢄꢑꢉꢅꢁꢈꢅ
ꢃꢏꢄꢅꢉꢎꢑꢄꢄꢈꢒ
ꢌꢄꢍꢄꢎꢃꢅ
ꢃ#ꢉ *' !ꢉ
'- ꢉ-#%ꢝ ꢉ
"-#* ꢉ
*%7: !;ꢉ
ꢜ*$ꢉ#'- !ꢏ
ꢜ ꢑꢅꢛꢃꢊꢌꢎꢃꢊꢂꢍꢆꢄꢅꢆꢊꢌꢅꢊ
ꢌꢎꢃꢊꢙꢆꢃꢛꢇꢅꢍꢄꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊ
ꢉꢋꢐꢊꢐꢃꢈꢃꢌꢃꢊꢉꢊ
ꢂꢎꢉꢆꢉꢂꢌꢃꢆꢘ
ꢀ$
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 24 Friday, July 29, 2005 9:28 AM
ꢒꢇꢆꢃꢂꢌꢊꢒꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊ'ꢋꢙꢍꢌ
ꢊ#ꢝ)')#*ꢉ'- ꢉ
ENTER
&%!ꢝ#!ꢉ#*ꢉ,#%!ꢉ
$ ꢝ')*ꢜ')#*ꢉ#*ꢉ
+
'- ꢉ7ꢜ"
&ꢂꢆꢅꢈꢈꢊꢌꢎꢃꢊꢕꢉꢙꢊꢉꢋꢐꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢕꢉꢙꢊ
ꢄꢂꢉꢈꢃꢊꢇꢓꢊꢋꢃꢂꢃꢄꢄꢉꢆꢔꢘ
ENTER
ꢀ
ꢉꢈ 3 &'ꢉ
ENTER
ꢓ ꢑꢄꢎꢃꢅ
ꢓꢄꢉꢃ ꢈꢐꢃ ꢁꢈꢅ
ꢔꢈꢇꢂꢃ
ꢈ 3 &'ꢉ
ꢉ=ꢌ ꢝ')*ꢜ')#*>ꢏ
8ꢅꢍꢌꢃꢊꢂꢉꢈꢂꢍꢈꢉꢌꢇꢅꢋꢊꢗꢇꢈꢈꢊ2ꢃꢊꢂꢉꢆꢆꢇꢃꢐꢊꢅꢍꢌꢊꢉꢋꢐꢊꢌꢎꢃꢊꢃꢋꢌꢇꢆꢃꢊꢆꢅꢍꢌꢃꢊ
ꢗꢇꢈꢈꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢅꢋꢊꢌꢎꢃꢊꢕꢉꢙꢘ
$
(
&ꢃꢈꢃꢂꢌꢊ
ꢅꢋꢊꢔꢅꢍꢆꢊꢆꢅꢍꢌꢃꢊ.ꢊ
ꢙꢅꢇꢋꢌꢄꢊꢙꢃꢆꢊꢌꢆꢇꢙꢘ
ꢊ.ꢚꢉꢔꢊꢙꢅꢇꢋꢌ/ꢊꢌꢅꢊꢄꢃꢌꢊꢌꢎꢃꢊꢉꢐꢐꢆꢃꢄꢄꢊꢉꢄꢊꢉꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢊ
ꢊꢙꢉꢖꢃꢊ$ꢀ/ꢘꢊ=ꢅꢍꢊꢂꢉꢋꢊꢄꢃꢌꢊꢍꢙꢊꢌꢅꢊ ꢊꢗꢉꢔ?ꢊ
ꢈ 3 &'ꢉ ꢏ
8ꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊ2ꢃꢖꢇꢋꢄꢊꢍꢄꢇꢋꢖꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢆꢅꢍꢌꢃꢘ
Note
●'ꢓꢊꢔꢅꢍꢆꢊꢐꢃꢄꢇꢆꢃꢐꢊꢆꢅꢍꢌꢃꢊꢂꢉꢋꢋꢅꢌꢊ2ꢃꢊꢓꢅꢍꢋꢐ>ꢊ
ꢊ.%ꢎꢉꢋꢖꢃꢊ
ꢆꢅꢍꢌꢃ/ꢊꢉꢈꢈꢅꢗꢄꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢅꢙꢌꢇꢅꢋꢊꢄꢃꢌꢌꢇꢋꢖꢄꢊꢌꢅꢊ2ꢃꢊꢂꢎꢉꢋꢖꢃꢐꢘꢊ
.ꢊ ꢊꢙꢉꢖꢃꢊꢀꢝ/
●&ꢃꢈꢃꢂꢌꢇꢋꢖꢊ
ꢒꢃꢕꢅꢊꢕꢅꢐꢃꢘ
ꢊꢓꢅꢆꢊꢓꢇꢛꢃꢊꢄꢃꢂꢅꢋꢐꢄꢊꢅꢆꢊꢕꢅꢆꢃꢊꢗꢇꢈꢈꢊꢈꢉꢍꢋꢂꢎꢊꢌꢎꢃꢊ
,ꢙꢃꢆꢉꢌꢃꢊꢉꢓꢌꢃꢆꢊ&ꢌꢃꢙꢊ$ꢊꢅꢓꢊHꢒꢇꢆꢃꢂꢌꢊꢒꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊ'ꢋꢙꢍꢌI
ꢈ 3 &'ꢉ
ꢏ
9ꢎꢃꢊꢂꢉꢈꢂꢍꢈꢉꢌꢇꢅꢋꢊꢆꢅꢍꢌꢃꢊꢂꢉꢋꢊ2ꢃꢊꢄꢃꢈꢃꢂꢌꢃꢐꢊꢓꢆꢅꢕꢊꢅꢋꢃꢊꢅꢓꢊꢌꢎꢆꢃꢃꢊ
ꢌꢔꢙꢃꢄꢊꢋꢉꢕꢃꢈꢔ>ꢊOꢍꢇꢂ4ꢊ.ꢌꢎꢃꢊꢓꢉꢄꢌꢃꢄꢌꢊꢆꢅꢍꢌꢃ/>ꢊꢁꢈꢌꢃꢆꢋꢘꢊ.ꢌꢎꢃꢊ
ꢄꢌꢉꢋꢐꢉꢆꢐꢊꢆꢅꢍꢌꢃ/>ꢊꢅꢆꢊ&ꢎꢅꢆꢌꢊ.ꢌꢎꢃꢊꢄꢎꢅꢆꢌꢃꢄꢌꢊꢆꢅꢍꢌꢃ/ꢘ
(
ꢈ 3 &'ꢉ ꢉ=ꢄ*(#!7ꢜ')#*>ꢏ
ꢒꢃꢌꢉꢇꢈꢄꢊꢆꢃꢖꢉꢆꢐꢇꢋꢖꢊꢌꢎꢃꢊꢇꢋꢐꢇꢛꢇꢐꢍꢉꢈꢊꢆꢅꢍꢌꢃꢄꢊ.ꢇꢘꢃꢘ>ꢊꢆꢃDꢍꢇꢆꢃꢐꢊꢌꢇꢕꢃꢊ
ꢌꢅꢌꢉꢈꢊꢐꢇꢄꢌꢉꢋꢂꢃ>ꢊꢆꢅꢉꢐꢄꢊꢍꢄꢃꢐ>ꢊꢃꢌꢂꢘ/ꢊ
ꢌꢄꢍꢄꢎꢃ ꢈꢕꢅ
ꢀꢁꢂꢃꢄ
ꢈ 3 &'ꢉ )'- !ꢉ
#!ꢉ
;ꢉ
;ꢉ
;ꢉꢜ*$ꢉ'- *ꢉꢝ 3 &'ꢉ
ꢉ8- *ꢉ,#%ꢉ-ꢜ9 ꢉ
$ &)$ $ꢉ#*ꢉ'- ꢉ!#%' ꢉ'#ꢉ
: ꢉ%ꢝ $ꢏ
ꢀ(
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 25 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢂꢄꢅꢆꢇꢃꢅꢆꢃ ꢈꢉꢇꢃꢊꢃꢋꢌꢍꢌꢎꢌꢃꢋꢌꢇꢎꢏꢆꢈꢎꢏꢅꢆ
■ ꢊꢅꢄꢉ=ꢊ#)*'ꢉ#(ꢉꢄ*' ! ꢝ'>ꢉꢄ&#*ꢝ
9ꢎꢃꢊꢓꢅꢈꢈꢅꢗꢇꢋꢖꢊꢉꢆꢃꢊ ,'ꢊꢇꢂꢅꢋꢄꢊꢄꢎꢅꢗꢋꢊꢅꢋꢊꢕꢉꢙꢄꢘ
ꢋ ꢝ'ꢜ%!ꢜ*'
ꢁ%'#7#')9
ꢋ &! ꢜ')#*
ꢀ#77%*)',
ꢁꢈꢈꢊꢆꢃꢄꢌꢉꢍꢆꢉꢋꢌꢄ
ꢁꢍꢌꢅꢕꢅ2ꢇꢈꢃꢊ%ꢈꢍ2
ꢁꢕꢍꢄꢃꢕꢃꢋꢌꢊ ꢉꢆ4
%ꢇꢌꢔꢊ%ꢃꢋꢌꢃꢆ
ꢁꢕꢃꢆꢇꢂꢉꢋ
%ꢎꢇꢋꢃꢄꢃ
7ꢉꢄꢊ&ꢌꢉꢌꢇꢅꢋ
ꢉꢆ4ꢇꢋꢖ
%ꢉꢄꢇꢋꢅ
%ꢅꢋꢛꢃꢋꢌꢇꢅꢋꢊ%ꢃꢋꢌꢃꢆ
%ꢅꢍꢆꢌꢊ1ꢅꢍꢄꢃ
7ꢅꢛꢃꢆꢋꢕꢃꢋꢌꢊ,ꢓꢓꢇꢂꢃꢄ
1ꢇꢖꢎꢃꢆꢊ0ꢐꢍꢂꢉꢌꢇꢅꢋ
1ꢅꢄꢙꢇꢌꢉꢈ
7ꢅꢈꢓꢊ%ꢅꢍꢆꢄꢃ
ꢁꢍꢌꢅꢊ&ꢃꢆꢛꢇꢂꢃꢊPꢊ
ꢑꢉꢇꢋꢌꢃꢋꢉꢋꢂꢃ
1ꢇꢄꢌꢅꢆꢇꢂꢉꢈꢊ
ꢑꢅꢋꢍꢕꢃꢋꢌ
%ꢅꢋꢌꢇꢋꢃꢋꢌꢉꢈ
)ꢉꢄꢌꢊ)ꢅꢅꢐ
)ꢆꢃꢋꢂꢎ
ꢑꢉꢆꢇꢋꢉ
ꢑꢍꢄꢃꢍꢕ
'ꢌꢉꢈꢇꢉꢋ
&4ꢇꢊ8ꢃꢄꢅꢆꢌ
"ꢇ2ꢆꢉꢆꢔ
Jꢉꢙꢉꢋꢃꢄꢃ
ꢑꢃ;ꢇꢂꢉꢋ
&ꢙꢅꢆꢌꢄꢊ%ꢅꢕꢙꢈꢃ;
ꢃꢆꢓꢅꢆꢕꢇꢋꢖꢊꢁꢆꢌꢄ
9ꢅꢍꢆꢇꢄꢌꢊꢁꢌꢌꢆꢉꢂꢌꢇꢅꢋ
9ꢅꢍꢆꢇꢄꢌꢊ'ꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋ
ꢚꢇꢋꢃꢆꢔ
ꢉꢆ4ꢊPꢊ8ꢃꢂꢆꢃꢉꢌꢇꢅꢋ
ꢅꢈꢇꢂꢃꢊ&ꢌꢉꢌꢇꢅꢋ
&ꢂꢎꢅꢅꢈ
ꢃ!ꢜ9 3
ꢁꢇꢆꢙꢅꢆꢌ
&ꢃꢉꢓꢅꢅꢐ
3ꢍꢄꢊ&ꢌꢉꢌꢇꢅꢋ
)ꢃꢆꢆꢔꢊ9ꢃꢆꢕꢇꢋꢉꢈ
1ꢅꢌꢃꢈ
9ꢎꢉꢇ
,ꢌꢎꢃꢆꢊ8ꢃꢄꢌꢉꢍꢆꢉꢋꢌꢄ
8ꢃꢋꢌꢉꢈꢊ%ꢉꢆꢊꢁꢖꢃꢋꢂꢔ
8ꢃꢄꢌꢊꢁꢆꢃꢉ
ꢒꢜ*5)*+
ꢈ-#"")*+
ꢅ'- !
3ꢉꢋ4
ꢁ9ꢑ
7ꢆꢅꢂꢃꢆꢔꢊ&ꢌꢅꢆꢃ
&ꢎꢅꢙꢙꢇꢋꢖꢊꢑꢉꢈꢈ
9ꢆꢉꢇꢋꢊ&ꢌꢉꢌꢇꢅꢋ
ꢀꢁꢂꢃꢄꢅꢂꢂꢆꢇ ꢈꢃꢉꢃꢊꢋ
ꢓꢄꢍꢄꢃꢄꢅ
ꢖꢄꢉꢃ ꢈꢐꢃ ꢁꢈ
ENTER
MENU
ꢉꢈ 3 &'ꢉ
ENTER
ENTER
ꢉꢈ 3 &'ꢉ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 26 Friday, July 29, 2005 9:28 AM
8ꢅꢍꢌꢃꢊ,ꢙꢌꢇꢅꢋꢄ
ENTER
●ꢒꢍꢆꢇꢋꢖꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢔꢅꢍꢊꢂꢉꢋꢊ
ꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢅꢙꢌꢇꢅꢋꢄ>ꢊꢄꢌꢅꢙꢊꢅꢆꢊ
ꢂꢎꢃꢂ4ꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢘ
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
MENU
ꢀꢁꢂꢃꢄꢅꢆꢂꢄ
ꢇ ꢀꢈꢉꢊꢄ
ꢀꢋꢉꢌꢀꢍꢎꢏꢄꢐꢂꢃꢑ
ꢈ 3 &'ꢉ
9
ꢈ ꢜ!&-ꢉ
ꢀ#*$)')#*
9
9
ꢈ 3 &'ꢉ
ꢎ
●
ꢀꢁꢂꢃꢄꢅ
ꢆꢇꢄ ꢄꢇꢄꢈꢉꢄꢊ
●
ꢀꢝ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 27 Friday, July 29, 2005 9:28 AM
■ ꢑ ꢆꢄ ꢅꢆꢒꢃꢃꢇꢆꢓ ꢁꢂꢆꢃꢓꢃꢈꢆꢎꢉꢔꢃꢍꢆ ꢄꢆꢅꢕꢃꢆꢊ ꢄꢉꢅ ꢂꢆꢈꢖꢂꢃꢃꢄꢆ ꢂꢆ ꢇꢃꢂꢋꢅꢃꢆꢅꢕꢃꢆꢈꢓꢈꢅꢃꢊꢆꢗꢕꢉꢏꢃꢆꢍꢂꢉꢘꢉꢄꢐ
ꢀꢁꢂꢃꢁꢄꢂꢅꢆꢇꢃ ꢈꢂꢄꢆꢈꢂꢉꢈꢄꢄꢊꢃ ꢉꢂꢇꢃꢋꢂꢋꢈꢉꢄꢊꢃꢇꢄꢊꢁꢃꢂꢌꢁꢅꢇꢄꢊꢁꢃꢉꢂꢍꢆꢊꢌꢈꢂꢋꢎꢊꢏꢊꢃ ꢐꢂꢑꢊꢃꢊꢒꢊꢓꢈꢂꢄꢆꢈꢂꢄꢊꢒꢈꢂꢉꢔꢈꢃꢄꢂ
ꢏꢊꢈꢍꢊꢃ ꢂꢄꢆꢈꢂꢒꢁꢃꢊꢄꢁꢎꢂꢉꢅꢎꢈꢈꢃꢂꢇꢃꢋꢂꢌꢊꢉꢄꢈꢃꢊꢃ ꢂꢄꢁꢂꢄꢆꢈꢂꢏꢁꢊꢅꢈꢂ ꢕꢊꢋꢇꢃꢅꢈꢂꢍꢆꢊꢌꢈꢂꢋꢎꢊꢏꢊꢃ ꢐꢂꢖꢔꢈꢎꢇꢄꢊꢃ ꢂꢄꢆꢈꢂꢉꢗꢉꢄꢈꢒꢂ
ꢍꢊꢌꢌꢂꢋꢊꢉꢄꢎꢇꢅꢄꢂꢄꢆꢈꢂꢋꢎꢊꢏꢈꢎꢂꢘꢎꢁꢒꢂꢌꢁꢁꢙꢊꢃ ꢂꢇꢆꢈꢇꢋꢂꢁꢘꢂꢄꢆꢈꢂꢏꢈꢆꢊꢅꢌꢈꢂꢇꢃꢋꢂꢒꢇꢗꢂꢅꢇꢕꢉꢈꢂꢇꢃꢂꢇꢅꢅꢊꢋꢈꢃꢄꢐꢂꢚꢌꢍꢇꢗꢉꢂꢉꢄꢁꢔꢂ
ꢄꢆꢈꢂꢏꢈꢆꢊꢅꢌꢈꢂꢊꢃꢂꢇꢂꢉꢇꢘꢈꢂꢌꢁꢅꢇꢄꢊꢁꢃꢂꢇꢃꢋꢂꢕꢉꢈꢂꢄꢆꢈꢂꢔꢇꢎꢙꢊꢃ ꢂꢛꢎꢇꢙꢈꢂꢛꢈꢘꢁꢎꢈꢂꢁꢔꢈꢎꢇꢄꢊꢃ ꢂꢄꢆꢈꢂꢉꢗꢉꢄꢈꢒꢐ
ꢀꢁꢂꢃꢄꢃꢅ
ꢉ
ꢉ
9ꢎꢃꢊꢆꢅꢍꢌꢃꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊDꢍꢇꢂ4ꢃꢄꢌꢊꢌꢇꢕꢃꢊꢗꢇꢈꢈꢊ
2ꢃꢊꢍꢄꢃꢐꢘꢊ
9ꢎꢃꢊꢉꢈꢌꢃꢆꢋꢉꢌꢇꢛꢃꢊꢆꢅꢍꢌꢃꢊꢗꢇꢈꢈꢊ2ꢃꢊꢍꢄꢃꢐꢘ
9ꢎꢃꢊꢆꢅꢍꢌꢃꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊꢄꢎꢅꢆꢌꢃꢄꢌꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊ
ꢗꢇꢈꢈꢊ2ꢃꢊꢍꢄꢃꢐꢘꢊ
ꢎꢜ&-ꢉ')7 ꢉꢜꢉ:%''#*ꢉ)ꢝꢉꢝ 3 &' $ꢉ)'ꢉ
8)33ꢉ'#++3 ꢉ: '8 *ꢉ%ꢝꢜ+ ꢉꢜ*$ꢉ
*#*G%ꢝꢜ+ ꢉ#(ꢉ'- ꢉ&#!! ꢝ"#*$)*+ꢉ
!#ꢜ$ꢝꢉ#!ꢉ( !!) ꢝꢏ
●
ꢊꢂꢉꢋꢊ2ꢃꢊꢄꢃꢈꢃꢂꢌꢃꢐꢊꢐꢍꢆꢇꢋꢖꢊꢆꢅꢍꢌꢃꢊ
ꢖꢍꢇꢐꢉꢋꢂꢃꢘ
●9ꢎꢃꢊꢆꢅꢍꢌꢃꢊꢗꢇꢈꢈꢊꢋꢅꢌꢊꢋꢃꢂꢃꢄꢄꢉꢆꢇꢈꢔꢊꢓꢅꢈꢈꢅꢗꢊꢌꢎꢃꢊ
ꢄꢙꢃꢂꢇꢓꢇꢃꢐꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢄꢘ
ꢀC
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 28 Friday, July 29, 2005 9:28 AM
8ꢅꢍꢌꢃꢊ,ꢙꢌꢇꢅꢋꢄ
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢀꢁꢂꢃꢄꢅꢆꢂꢄꢇ ꢀꢈꢉꢊꢄ
ꢀꢋꢉꢌꢀꢍꢎꢏꢄꢐꢂꢃꢑ
ꢈ 3 &'ꢉ
ꢍꢃꢅꢆꢅꢎꢃꢆꢏꢉꢐꢆꢋꢊꢁꢈꢅꢆꢌ ꢁꢈꢑꢆ
ꢐꢊꢌꢂꢆꢋꢂꢃꢒꢃꢂꢂꢃꢇꢆꢓꢃꢅꢎꢊꢇꢔ
ꢍꢃꢕꢃꢄꢅꢆ
ꢁ$$)')#*ꢉ#(ꢉ
ꢐꢜ,ꢉ"#)*'ꢝ
ꢀꢁꢂꢃꢄꢅꢄꢃꢂꢆꢄꢇꢂ ꢈꢉꢃꢅꢈꢉꢊꢃꢄꢉ ꢄ ꢂꢈꢄꢋꢌꢄ
ꢄꢒꢓꢁꢃꢂꢇ ꢈꢂꢇꢉ ꢔꢕꢄꢇꢂꢄꢖꢇꢌꢌꢄ
ꢊꢁꢋꢌꢈꢏꢁꢄꢂꢅꢁꢄꢏꢍꢊꢊꢁ ꢂꢄꢆꢁꢃꢂꢇ ꢈꢂꢇꢉ ꢄ
ꢈ ꢆꢄꢊꢉꢍꢂꢁꢄꢏꢈꢌꢏꢍꢌꢈꢂꢇꢉ ꢄꢖꢇꢌꢌꢄꢗꢁꢄ
ꢏꢈꢊꢊꢇꢁꢆꢄꢉꢍꢂꢄꢉ ꢏꢁꢄꢈꢘꢈꢇ ꢑ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇꢃꢁ ꢈ
ꢁꢄꢈꢉꢊꢋꢇꢃ ꢆꢇꢃꢁ ꢈ
ꢁꢌꢈꢍꢆꢎꢈꢏꢁꢃ ꢇꢈ
ꢏꢁꢋꢃꢇꢃꢁ ꢋ
&ꢎꢅꢗꢄꢊꢌꢎꢃꢊꢕꢉꢙ
ꢈ 3 &'ꢉ
ꢉ=ꢀ-ꢜ*+ ꢉ
ꢍ#&ꢜ')#*>ꢏ
ꢈꢉꢑꢉꢚꢅꢀꢁꢂꢃꢀꢄꢅꢁꢁꢆꢇ ꢀꢈꢆꢉꢀꢁꢂꢃꢀ
ꢊꢋꢌꢀꢍꢆꢎꢇꢁ ꢀꢎꢇꢀꢁꢂꢃꢀꢆꢉꢏꢃꢉꢀꢁꢂꢋꢁꢀ
ꢁꢂꢃꢌꢀ ꢂꢆꢅꢐꢏꢀꢄꢃꢀꢑꢎ ꢎꢁꢃꢏꢒ
ꢀꢁꢂꢃꢄꢃꢅꢆꢇꢃꢁ ꢈ
ꢁꢄꢈꢇꢉꢊꢈ
ꢋꢃꢌꢃꢇꢃ ꢍꢈ
ꢎꢏꢂꢊꢏ
'ꢓꢊꢔꢅꢍꢊꢗꢇꢄꢎꢊꢌꢅꢊꢂꢉꢋꢂꢃꢈꢊꢉꢋꢊ
ꢇꢋꢐꢇꢂꢉꢌꢇꢅꢋ>ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢁꢈꢌꢃꢆꢋꢉꢌꢇꢛꢃꢈꢔ>ꢊꢔꢅꢍꢊꢂꢉꢋꢊ
ꢘ
ꢂꢉꢋꢂꢃꢈꢊꢇꢌꢊ2ꢔꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢌꢎꢃꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋ-ꢗꢉꢔꢊꢙꢅꢇꢋꢌꢄꢊꢌꢎꢉꢌꢊ
ꢄꢃꢌꢊꢌꢎꢃꢊꢅꢆꢐꢃꢆꢘ
ꢒꢂꢓꢂꢅꢔꢕꢃꢄꢕꢖꢄ
ꢒꢂꢗꢅꢔꢃꢘꢅꢔꢕꢃꢄ
ꢕꢙꢄꢚꢘꢛꢄ
ꢈ 3 &'ꢉ'- ꢉ:%''#*ꢉ
&#!! ꢝ"#*$)*+ꢉ'#ꢉ'- ꢉ
$ ꢝ')*ꢜ')#*ꢉ#!ꢉ8ꢜ,ꢉ
"#)*'ꢉ'#ꢉ: ꢉ$ 3 ' $ꢏ
ꢜ
ꢋꢕꢔꢃꢅꢗ
ꢒꢂꢓꢂꢅꢔꢕꢃꢄꢕꢖꢄ
ꢒꢂꢗꢅꢔꢃꢘꢅꢔꢕꢃꢄ
ꢘꢃꢜꢄꢝꢓꢓꢄꢚꢘꢛꢄ
ꢋꢕꢔꢃꢅꢗ
ꢔ ꢕꢂꢈꢆ ꢃꢄꢒꢓ ꢄꢉ ꢃ ꢒꢊꢍꢈ
ꢀ*
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 29 Friday, July 29, 2005 9:28 AM
ꢃꢆꢏꢉꢐꢆꢋꢊꢁꢈꢅꢆꢌ ꢁꢈꢑꢆ
ꢋꢂꢃꢒꢃꢂꢂꢃꢇꢆꢓꢃꢅꢎꢊꢇꢔ
ꢆꢇꢁ ꢅꢄꢇꢁꢅꢈꢁꢉꢊꢋꢈꢁꢌꢅꢍꢎꢏꢅ
ꢐꢑꢋ ꢄꢒꢅꢇꢎꢓꢁꢅꢔꢁꢁ ꢅꢒꢁꢄꢊꢐꢕꢅ
ꢋ ꢌꢋꢃꢎꢄꢁꢅꢄꢇꢁꢅꢑꢈꢌꢁꢈꢅꢋ ꢅꢍꢇꢋꢃꢇꢅ
ꢄꢇꢁꢏꢅꢎꢈꢁꢅꢄꢑꢅꢔꢁꢅꢓꢋꢒꢋꢄꢁꢌꢖ
●ꢚꢎꢃꢋꢊꢄꢃꢌꢌꢇꢋꢖꢊꢍꢙꢊꢌꢎꢃꢊ
ꢀꢋꢐꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢊꢔꢅꢍꢊꢉꢈꢄꢅꢊ
ꢋꢃꢃꢐꢊꢌꢅꢊꢇꢋꢐꢇꢂꢉꢌꢃꢊꢌꢎꢃꢊ
ꢅꢆꢐꢃꢆꢘ
ꢍꢃꢕꢃꢄꢅꢆ
●8ꢃꢙꢃꢉꢌꢊꢓꢆꢅꢕꢊꢌꢎꢃꢊ
ꢄꢃꢈꢃꢂꢌꢃꢐꢊꢄꢌꢃꢙꢄꢊ
!ꢉꢁꢁꢆꢄꢅꢃꢉꢄꢅꢑꢁꢈꢇꢃꢋꢁꢌꢅꢃꢁꢅꢔꢄꢅ
ꢇꢒꢒꢄꢒꢛꢅꢇꢌꢒꢅꢃꢉꢄꢌꢅꢆꢄꢑꢄꢈꢃꢃꢀ
ꢖ
>ꢊꢗꢎꢃꢋꢊ
ꢔꢅꢍꢊꢗꢉꢋꢌꢊꢌꢅꢊꢄꢃꢌꢊꢍꢙꢊꢕꢅꢆꢃꢊ
ꢌꢎꢉꢋꢊꢌꢎꢆꢃꢃꢊꢗꢉꢔ?ꢙꢅꢇꢋꢌꢄꢘ
ꢄ
ꢄꢒꢓꢁꢃꢂꢇ ꢈꢂꢇꢉ ꢔꢕꢄꢇꢂꢄꢖꢇꢌꢌꢄ
ꢂꢅꢁꢄꢏꢍꢊꢊꢁ ꢂꢄꢆꢁꢃꢂꢇ ꢈꢂꢇꢉ ꢄ
ꢍꢂꢁꢄꢏꢈꢌꢏꢍꢌꢈꢂꢇꢉ ꢄꢖꢇꢌꢌꢄꢗꢁꢄ
ꢉꢍꢂꢄꢉ ꢏꢁꢄꢈꢘꢈꢇ ꢑ
ꢈ 3 &'ꢉ'- ꢉ:%''#*ꢉ(#!ꢉ'- ꢉ
3#&ꢜ')#*ꢉ'#ꢉ: ꢉ7#$)() $ꢏ
&ꢎꢅꢗꢄꢊꢌꢎꢃꢊꢕꢉꢙꢊꢓꢅꢆꢊꢌꢎꢃꢊ
ꢔ#9 ꢉ ꢉ'#ꢉ3#&ꢜ')#*ꢉ
'ꢉ
ꢉ=ꢀ-ꢜ*+ ꢉ
ENTER
ꢜ*$ꢉ'- *ꢉ"! ꢝꢝꢉ
ꢏ
')#*>ꢏ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋ-ꢗꢉꢔꢊꢙꢅꢇꢋꢌꢄꢘ
ꢀꢁꢂꢃꢀꢄꢅꢁꢁꢆꢇ ꢀꢈꢆꢉꢀꢁꢂꢃꢀ
ꢆꢎꢇꢁ ꢀꢎꢇꢀꢁꢂꢃꢀꢆꢉꢏꢃꢉꢀꢁꢂꢋꢁꢀ
ꢂꢆꢅꢐꢏꢀꢄꢃꢀꢑꢎ ꢎꢁꢃꢏꢒ
ꢐ- *ꢉ'- ꢉꢝ D% *& ꢉ-ꢜꢝꢉ
: *ꢉ"3 ' $;ꢉ'- ꢉ
9)ꢝ)')*+ꢉ#!$ !ꢉ8)33ꢉ: ꢉ
%"$ꢜ' $ꢉꢜ%'#7ꢜ')&ꢜ33,ꢏ
ꢗꢇꢄꢎꢊꢌꢅꢊꢂꢉꢋꢂꢃꢈꢊꢉꢋꢊ
ꢇꢅꢋ>ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢉꢌꢇꢛꢃꢈꢔ>ꢊꢔꢅꢍꢊꢂꢉꢋꢊ
ꢘ
ꢇꢌꢊ2ꢔꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢌꢎꢃꢊ
ꢉꢌꢇꢅꢋ-ꢗꢉꢔꢊꢙꢅꢇꢋꢌꢄꢊꢌꢎꢉꢌꢊ
ꢊꢅꢆꢐꢃꢆꢘ
'ꢉ'- ꢉ:%''#*ꢉ
ꢝ"#*$)*+ꢉ'#ꢉ'- ꢉ
*ꢜ')#*ꢉ#!ꢉ8ꢜ,ꢉ
'#ꢉ: ꢉ$ 3 ' $ꢏ
ꢜ %ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋ
ꢔ ꢕꢂꢈꢆ ꢃꢄꢒꢓ ꢄꢉ ꢃ ꢒꢊꢍꢈ
ꢀE
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 30 Friday, July 29, 2005 9:28 AM
8ꢅꢍꢌꢃꢊ,ꢙꢌꢇꢅꢋꢄ
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢀꢁꢂꢃꢄꢅꢆꢂꢄ
ꢇ ꢀꢈꢉꢊꢄ
ꢀꢋꢉꢌꢀꢍꢎꢏꢄꢐꢂꢃꢑ
ꢈ 3 &'ꢉ
ꢌ)ꢝ"3ꢜ,ꢉ
ꢋ#%'
ꢂꢝ ꢉ'- ꢉ:%''#*
ꢈ 3 &'ꢉ
ꢊꢜ
ꢊꢜ
ꢄꢕ ' ꢑꢑꢈꢄꢖꢏꢐꢄ
ꢋ#%' ꢉ
ꢊ! 9) 8
ꢊꢜ &ꢌꢅꢙꢊꢌꢎꢃꢊꢄ
ꢄꢕ ' ꢑꢑꢈꢄꢖꢏꢐꢄ
ꢊꢜ
ꢊꢜ
ꢈ '')*+ꢉ'- ꢉ
&#*$)')#*ꢝꢉ
(#!ꢉ
ꢝ)7%3ꢜ')#*ꢉ
!%*
ꢔꢕꢖꢂꢗꢇꢀꢁꢂꢃ
ꢁ
ꢎꢁꢂꢃꢄꢅꢆꢇꢁ
ꢊ
ꢀꢁꢂꢃꢄꢂꢅꢄꢃꢆꢁꢇ
ꢆꢈꢁ ꢉꢊꢅꢆꢁ
ꢈ 3 &'ꢉ
ꢈ 3 &'ꢉ
ꢚꢕꢅ
ꢌꢃꢁꢇꢉꢅꢑꢁꢂꢃꢄꢅ
ꢕꢂ ꢖꢐꢈꢎꢄ
ꢜ
$!
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 31 Friday, July 29, 2005 9:28 AM
ꢃ- ꢉꢎ*')! ꢉꢋ#%' ꢉꢝ&! *ꢉꢜ"" ꢜ!ꢝꢏ
ꢎ*' !ꢉ'- ꢉ7ꢜ"ꢉꢝ&!#33ꢏ
ꢂꢝ ꢉ'- ꢉ:%''#*ꢝꢉ$)ꢝ"3ꢜ, $ꢉ#*ꢉꢝ&! *ꢉ'#ꢉ&ꢜ!!,ꢉ#%'ꢉꢜꢉꢝ)7%3ꢜ')#*ꢉ!%*ꢏ
ꢊꢜ 0ꢋꢌꢃꢆꢊꢌꢎꢃꢊꢕꢉꢙꢊꢄꢂꢆꢅꢈꢈꢘ
ꢊꢜ ꢑꢅꢛꢃꢊꢌꢎꢃꢊꢄꢌꢉꢆꢌꢊꢙꢅꢇꢋꢌꢘ
ꢄꢕ ' ꢑꢑꢈꢄꢖꢏꢐꢄ ꢄꢃꢂꢝꢏꢇ ꢐꢂꢖꢉꢄꢑꢏꢉꢄꢂꢉꢄꢐꢁꢋꢄꢅꢂꢑꢋꢌꢐꢂꢖꢉꢄꢖꢜꢄꢐꢁꢋꢄꢃꢐ ꢑꢐꢄꢆꢖꢂꢉꢐꢒꢄ(ꢁꢋꢉꢄꢐꢁꢋꢄꢑꢏꢉꢄꢁ ꢃꢄꢍꢋꢋꢉꢄꢃꢐ ꢑꢐꢋꢅ!ꢄꢐꢁꢂꢃꢄꢍꢏꢐꢐꢖꢉꢄ
&ꢂꢇꢇꢄꢍꢋꢄꢅꢂꢃꢆꢇ ꢈꢋꢅꢄ ꢃꢄ
!ꢄ ꢉꢅꢄ&ꢁꢋꢉꢄꢃꢋꢇꢋꢌꢐꢋꢅ!ꢄꢂꢐꢄ&ꢂꢇꢇꢄꢌ ꢏꢃꢋꢄꢑꢏꢉꢉꢂꢉꢊꢄꢐꢖꢄꢐ ꢋꢄꢆꢇ ꢌꢋꢄ ꢐꢄꢁꢂꢊꢁꢄꢃꢆꢋꢋꢅꢒ
ꢊꢜ &ꢌꢅꢙꢊꢌꢎꢃꢊꢄꢇꢕꢍꢈꢉꢌꢇꢅꢋꢊꢆꢍꢋꢘ
ꢄꢕ ' ꢑꢑꢈꢄꢖꢏꢐꢄ ꢄꢃꢂꢝꢏꢇ ꢐꢂꢖꢉꢄꢑꢏꢉꢄꢂꢉꢄꢐꢁꢋꢄꢅꢂꢑꢋꢌꢐꢂꢖꢉꢄꢖꢜꢄꢐꢁꢋꢄꢅꢋꢃꢐꢂꢉ ꢐꢂꢖꢉꢒꢄ(ꢁꢋꢉꢄꢐꢁꢋꢄꢑꢏꢉꢄꢁ ꢃꢄꢍꢋꢋꢉꢄꢃꢐ ꢑꢐꢋꢅ!ꢄꢐꢁꢂꢃꢄ
ꢍꢏꢐꢐꢖꢉꢄ&ꢂꢇꢇꢄꢍꢋꢄꢅꢂꢃꢆꢇ ꢈꢋꢅꢄ ꢃꢄ
!ꢄ ꢉꢅꢄ&ꢁꢋꢉꢄꢃꢋꢇꢋꢌꢐꢋꢅ!ꢄꢂꢐꢄ&ꢂꢇꢇꢄꢌ ꢏꢃꢋꢄꢑꢏꢉꢉꢂꢉꢊꢄꢐꢖꢄꢐ ꢋꢄꢆꢇ ꢌꢋꢄ ꢐꢄꢁꢂꢊꢁꢄꢃꢆꢋꢋꢅꢒ
ꢊꢜ ꢑꢅꢛꢃꢊꢌꢅꢊꢌꢎꢃꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢘ
ꢊꢜ ꢒꢇꢄꢙꢈꢉꢔꢄꢊꢌꢎꢃꢊ0ꢒ'9ꢊ8,590ꢊ 806'0ꢚꢊꢄꢂꢆꢃꢃꢋꢘ
ꢊꢜꢊ&ꢌꢅꢙꢄꢊꢉꢌꢊꢌꢎꢃꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢅꢆꢊꢌꢎꢃꢊꢋꢃ;ꢌꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢘ
RET
ꢊꢜꢊ&ꢌꢅꢙꢄꢊꢉꢌꢊꢉꢊꢙꢅꢇꢋꢌꢊꢅꢓꢊꢇꢋꢌꢃꢆꢃꢄꢌꢊꢗꢎꢇꢂꢎꢊꢎꢉꢄꢊ2ꢃꢃꢋꢊꢄꢃꢌꢍꢙꢊꢅꢋꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢘ
ꢊꢜꢊꢒꢃꢈꢃꢌꢃꢊꢌꢎꢃꢊ ,'ꢊꢗꢎꢇꢂꢎꢊꢎꢉꢄꢊ2ꢃꢃꢋꢊꢄꢃꢈꢃꢂꢌꢃꢐꢘ
ꢔꢕꢖꢂꢗꢇꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢇꢂꢁꢘꢇꢔꢕꢖꢂꢇꢙꢒꢋꢍꢇꢚꢌꢁꢑꢛꢜꢔꢕꢖꢇꢂ ꢋꢒꢅꢝꢉꢓꢇ ꢈꢉꢐꢇꢋꢐꢉꢇꢋꢙꢇ ꢈꢉꢂꢉꢇꢁꢂꢇꢂꢉꢄꢉꢑ ꢉꢎ!ꢇ
ꢁ ꢇ"ꢁꢄꢄꢇ#ꢉꢇꢎꢁꢂꢃꢄꢅꢆꢉꢎꢇꢋꢐꢇ ꢈꢉꢇꢍꢅꢃ$ꢇꢙꢌꢒ ꢈꢉꢒꢍꢋꢒꢉ!ꢇ
ꢎꢁꢂꢃꢄꢅꢆꢇꢁ ꢉꢍꢂꢇꢋ ꢈꢉꢒꢇ ꢈꢅꢐꢇꢂꢈꢋ"ꢐꢇꢈꢉꢒꢉꢓꢇ%ꢋꢒꢇꢍꢋꢒꢉꢇꢎꢉ ꢅꢁꢄꢂ!ꢇꢒꢉꢙꢉꢒꢇ ꢋꢇꢃꢅꢝꢉꢇ&'ꢓ
ꢇꢑꢅꢐꢇ#ꢉꢇꢂꢉꢄꢉꢑ ꢉꢎꢇ ꢋꢇ
ꢊ
ꢖꢎꢗꢄꢎꢍꢇꢄ ꢘꢂꢏꢋꢃ ꢗꢄꢙ ꢅꢒꢂꢁꢇꢂꢈꢒꢄꢊꢅꢄꢅ ꢃ ꢆꢒ ꢉꢄꢎꢍꢇꢄꢚꢛꢖꢅꢄꢂꢈꢉꢄꢂꢄꢅꢊꢏꢁꢃꢂꢒꢊꢍꢈꢄꢇꢁꢈꢄꢊꢅꢄꢀꢁꢂꢃꢁꢄꢅꢆꢇꢀ ꢈꢉꢆ
ꢊꢆꢁꢋ ꢀꢆꢌ ꢍꢍꢆꢁꢋꢄꢈꢆꢀꢁꢎꢏꢆꢂꢁꢆꢂꢆꢃꢄꢀꢁꢂꢇꢃꢂꢈꢁꢆꢎꢈꢆꢁꢋꢄꢆꢃꢎꢇꢁꢄꢐ
ꢚꢕꢅ
ꢅꢋꢆꢅꢆꢄꢑꢄꢈꢃꢄꢒꢅꢉꢄ ꢄꢛꢅꢃꢉꢄꢅꢆꢏꢆꢃꢄꢐꢅꢊꢋꢑꢑꢅꢒꢋꢆꢓꢑꢇꢏꢅꢋꢌꢕꢁ ꢐꢇꢃꢋꢁꢌꢅ ꢄꢑꢇꢃꢋꢌꢎꢅꢃꢁꢅꢃꢉꢄꢅꢄꢆꢃꢇꢔꢑꢋꢆꢉꢐꢄꢌꢃꢅ"ꢂꢄꢆꢃꢋꢁꢌꢖ
ꢜ %ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊ%ꢉꢋꢂꢃꢈꢊ7ꢍꢇꢐꢉꢋꢂꢃꢘ
$+
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 32 Friday, July 29, 2005 9:28 AM
●=ꢅꢍꢊꢂꢉꢋ>ꢊꢃꢐꢇꢌ>ꢊꢅꢆꢊꢐꢃꢈꢃꢌꢃꢊꢉꢋꢔꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢄ>ꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢄ>ꢊꢅꢆꢊ
ꢕꢉꢆ4ꢃꢐꢊꢙꢅꢇꢋꢌꢘ
ꢁꢐꢐꢆꢃꢄꢄꢊ3ꢅꢅ4
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢅ" *ꢉ'- ꢉ
Eꢁꢌꢌꢋꢎꢈꢈꢉ
ꢒꢅꢅ<F
ꢘꢄꢗꢊꢇ ꢂꢔꢊꢕꢃꢌꢂ
ꢋꢌꢊꢇꢆꢐꢄ
ꢈ 3 &'ꢉ'- ꢉ
&ꢜ' +#!,ꢉ(!#7ꢉ
'- ꢉ3)ꢝ'ꢏ
ꢈ 3 &'ꢉ
ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢈꢉꢆ
ꢊꢃꢈꢋ ꢄꢂꢌꢉ ꢃꢈꢆ
ꢌꢈꢍꢆ
ꢀꢃꢍ ꢋ ꢎꢌꢉ ꢃꢈ
ꢔ 7#!,ꢉ
ꢊ#)*'ꢉ
ꢌ 3 ')#*
ꢁ33ꢉꢔ 7#!,ꢉ
ꢊ#)*'ꢉ
ꢌ 3 ')#*
ꢀꢁꢂꢃꢄꢅꢆꢇ
ꢈꢁꢉꢃ
ꢊꢅꢋꢌꢍꢌꢎꢁꢂꢌꢅꢏ
$ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 33 Friday, July 29, 2005 9:28 AM
ꢈ 3 &'ꢉ'- ꢉ
&ꢜ' +#!,ꢉ(!#7ꢉ
'- ꢉ3)ꢝ'ꢏ
ꢈ 'ꢉꢜꢉ7 7#!,ꢉ
"#)*'ꢉ%ꢝ)*+ꢉ,#%!ꢉ
"! ( !! $ꢉ7 '-#$ꢏ
ꢈꢉꢑꢉꢚꢅ ꢁ ꢕꢉꢕꢆꢖꢔ
ꢋꢆꢃꢇꢅ ꢅꢆ ꢒꢉ ꢕꢆꢝꢃ%ꢃꢉꢝ
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄꢐꢁꢋꢄꢅꢂꢃꢆꢇ ꢈꢄꢂꢌꢖꢉꢄꢐꢖꢄꢍꢋꢄ
ꢃꢋꢇꢋꢌꢐꢋꢅꢒꢄ# ꢊꢋꢄ)ꢄ ꢉꢅꢄꢘꢄꢌꢖꢉꢐ ꢂꢉꢄ
ꢃꢐ ꢉꢅ ꢑꢅꢄꢂꢌꢖꢉꢃ!ꢄ&ꢁꢋꢑꢋ ꢃꢄꢐꢁꢋꢄ
(ꢂꢐꢁꢄ"ꢖꢏꢉꢅꢄꢆ ꢊꢋꢄꢌꢖꢉꢐ ꢂꢉꢃꢄꢂꢌꢖꢉꢃꢄ
&ꢁꢂꢌꢁꢄ ꢇꢃꢖꢄꢆꢇ ꢈꢍ ꢌ ꢄꢃꢖꢏꢉꢅꢃꢒ
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄꢐꢁꢋꢄꢃꢐꢖꢑ ꢊꢋꢄꢌ ꢐꢋꢊꢖꢑꢈꢄꢐꢖꢄ
ꢍꢋꢄꢌꢁ ꢉꢊꢋꢅꢒꢄ"ꢋꢇꢋꢌꢐꢄꢐꢁꢋꢄꢍꢏꢐꢐꢖꢉꢄ
ꢌꢖꢑꢑꢋꢃꢆꢖꢉꢅꢂꢉꢊꢄꢐꢖꢄꢐꢁꢋꢄꢉꢋ&ꢄ
ꢌ ꢐꢋꢊꢖꢑꢈꢒ
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄꢐꢁꢋꢄꢉ ꢝꢋꢄꢐꢖꢄꢍꢋꢄꢌꢁ ꢉꢊꢋꢅꢒꢄ
(ꢁꢋꢉꢄꢋꢅꢂꢐꢂꢉꢊꢄꢁ ꢃꢄꢍꢋꢋꢉꢄ
ꢌꢖꢝꢆꢇꢋꢐꢋꢅ!ꢄꢃꢋꢇꢋꢌꢐꢄ
*ꢏꢑꢐꢁꢋꢑꢝꢖꢑꢋ!ꢄꢃꢋꢇꢋꢌꢐꢄ
ꢒꢄ
ꢄꢐꢖꢄ
ꢅꢂꢃꢆꢇ ꢈꢄꢉ ꢝꢋꢃꢄꢖꢉꢄꢐꢁꢋꢄꢝ ꢆ!ꢄꢖꢑꢄ
ꢄꢂꢜꢄꢐꢁꢋꢃꢋꢄꢉ ꢝꢋꢃꢄ ꢑꢋꢄꢉꢖꢐꢄꢐꢖꢄ
ꢍꢋꢄꢅꢂꢃꢆꢇ ꢈꢋꢅꢒ
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄꢝꢋꢝꢖꢑꢈꢄꢆꢖꢂꢉꢐꢃꢄꢐꢖꢄꢍꢋꢄ
ꢌꢁꢋꢌ ꢋꢅꢄ ꢉꢅꢄꢝꢖꢅꢂꢜꢂꢋꢅꢄꢖꢉꢄꢐꢁꢋꢄ
ꢝ ꢆꢄꢃꢌꢑꢋꢋꢉꢒꢄꢛꢜꢐꢋꢑꢄꢌꢁꢋꢌ ꢂꢉꢊꢒ
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄꢐꢁꢋꢄꢐꢋꢇꢋꢆꢁꢖꢉꢋꢄꢉꢏꢝꢍꢋꢑꢄꢐꢖꢄ
ꢍꢋꢄꢝꢖꢅꢂꢜꢂꢋꢅꢒꢄ(ꢁꢋꢉꢄꢋꢅꢂꢐꢂꢉꢊꢄꢁ ꢃꢄ
ꢍꢋꢋꢉꢄꢌꢖꢝꢆꢇꢋꢐꢋꢅ!ꢄꢃꢋꢇꢋꢌꢐꢄ
ꢒ
ꢈ 3 &'ꢉꢜꢉ7 7#!,ꢉ
"#)*'ꢉ'#ꢉ: ꢉ
$ 3 ' $ꢏ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
!ꢖꢁꢓꢉ ꢑꢉꢅꢅꢉꢖꢓ #ꢓꢃꢇꢄ
& ꢉꢇꢅꢉꢖ ꢅ"ꢉ ꢇꢉ' ꢑꢉꢅꢅꢉꢖ& ꢁꢇꢝ ꢅ"ꢉꢇ ꢓꢉꢑꢉꢚꢅ
$
8uhtr†ꢁ‡urꢁ†ryrp‡rqꢁ
ph‡rt‚ꢀ’ꢁh€r
$$
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 34 Friday, July 29, 2005 9:28 AM
ꢁꢐꢐꢆꢃꢄꢄꢊ3ꢅꢅ4
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢅ" *ꢉ'- ꢉ
Eꢁꢌꢌꢋꢎꢈꢈꢉ
ꢒꢅꢅ<F
ꢁ9#)$ꢉꢁ! ꢜꢉ
ꢈ'#!ꢜ+
ꢏꢐꢃ ꢍꢆꢏꢄꢁꢌꢆ
ꢊꢃꢈꢋ ꢄꢂꢌꢉ ꢃꢈꢆ
ꢌꢈꢍꢆ
ꢈ 3 &'ꢉ
ꢀꢃꢍ ꢋ ꢎꢌꢉ ꢃꢈ
ꢁ9#)$ꢉꢁ! ꢜꢉ
ꢌ 3 ')#*
ꢁ33ꢉꢁ9#)$ꢉ
ꢁ! ꢜꢉ
ꢌ 3 ')#*
ꢀꢁꢂꢃꢄꢅꢆꢇ
ꢈꢁꢉꢃ
ꢊꢅꢋꢌꢍꢌꢎꢁꢂꢌꢅꢏ
$(
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 35 Friday, July 29, 2005 9:28 AM
ꢈ 3 &'ꢉꢜ*ꢉꢜ9#)$ꢉ
ꢜ! ꢜꢉ%ꢝ)*+ꢉ,#%!ꢉ
"! ( !! $ꢉ7 '-#$ꢏ
ꢄꢕ +ꢋꢅꢏꢌꢋꢃꢄꢐꢁꢋꢄꢃꢂ,ꢋꢄꢖꢜꢄꢐꢁꢋꢄ
-ꢖꢂꢅꢄ ꢑꢋ ꢒ
ꢄꢕ %ꢉꢌꢑꢋ ꢃꢋꢃꢄꢐꢁꢋꢄꢃꢂ,ꢋꢄꢖꢜꢄ
ꢐꢁꢋꢄ -ꢖꢂꢅꢄ ꢑꢋ ꢒ
ꢈꢉꢑꢉꢚꢅ ꢁꢇ ꢁꢂꢆꢃꢝ ꢁꢖꢉꢁ
ꢅꢆ ꢒꢉ ꢕꢆꢝꢃ%ꢃꢉꢝ$
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄꢐꢁꢋꢄꢉ ꢝꢋꢄꢐꢖꢄꢍꢋꢄ
ꢌꢁ ꢉꢊꢋꢅꢒꢄ(ꢁꢋꢉꢄꢋꢅꢂꢐꢂꢉꢊꢄꢁ ꢃꢄ
ꢍꢋꢋꢉꢄꢌꢖꢝꢆꢇꢋꢐꢋꢅ!ꢄꢃꢋꢇꢋꢌꢐꢄ
ꢒꢄ*ꢏꢑꢐꢁꢋꢑꢝꢖꢑꢋ!ꢄꢃꢋꢇꢋꢌꢐꢄ
ꢄꢐꢖꢄꢅꢂꢃꢆꢇ ꢈꢄꢉ ꢝꢋꢃꢄꢖꢉꢄꢐꢁꢋꢄ
ꢝ ꢆ!ꢄꢖꢑꢄ ꢄꢂꢜꢄꢐꢁꢋꢃꢋꢄꢉ ꢝꢋꢃꢄ
ꢑꢋꢄꢉꢖꢐꢄꢐꢖꢄꢍꢋꢄꢅꢂꢃꢆꢇ ꢈꢋꢅꢒ
ꢄꢕ ꢛꢇꢇꢖ&ꢃꢄ -ꢖꢂꢅꢄ ꢑꢋ ꢄꢐꢖꢄꢍꢋꢄ
ꢌꢁꢋꢌ ꢋꢅꢄ ꢉꢅꢄꢝꢖꢅꢂꢜꢂꢋꢅꢄꢖꢉꢄꢐꢁꢋꢄ
ꢝ ꢆꢄꢃꢌꢑꢋꢋꢉꢒꢄꢛꢜꢐꢋꢑꢄꢌꢁꢋꢌ ꢂꢉꢊꢒ
ꢈ 3 &'ꢉꢜ*ꢉꢜ9#)$ꢉ
ꢜ! ꢜꢉ'#ꢉ: ꢉ$ 3 ' $ꢏ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
ꢜ
ꢊ
%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
$
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 36 Friday, July 29, 2005 9:28 AM
ꢁꢐꢐꢆꢃꢄꢄꢊ3ꢅꢅ4
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
MENU
ꢏ
ꢅ" *ꢉ'- ꢉ
Eꢁꢌꢌꢋꢎꢈꢈꢉ
ꢒꢅꢅ<F
%ꢄꢁꢌꢕꢃꢆꢌꢕꢊꢃꢂ&ꢂ
'ꢆ ꢂꢔꢊꢕꢃꢌꢁ
ꢈ 3 &'ꢉ
.ꢊ
ꢊꢙꢉꢖꢃꢊꢀ*/
ꢈ 3 &'ꢉ
ꢔꢇꢄ(ꢕꢊ"ꢁꢂ
%ꢄꢁꢌꢕꢃꢆꢌꢕꢊꢃꢂ
%ꢄ$ꢄꢌꢕꢊꢃ
ꢌꢍꢍ ꢀꢁꢂꢃꢄꢅꢆꢇ
ꢈꢂꢇꢉꢄꢊꢋꢉꢄꢅꢊꢈꢂꢍꢂꢉꢄꢅꢊ
ꢈ 3 &'ꢉ
ꢔꢇꢄꢁꢄꢌꢂ
%ꢄꢁꢌꢕꢃꢆꢌꢕꢊꢃꢂ
ꢋꢌꢊꢇꢆꢐꢄ
ꢀꢁꢂꢃꢂꢄꢅꢆꢂꢃꢄꢇ ꢈꢄꢇꢉ ꢅ
ꢊꢉ ꢋꢇꢁꢌꢈꢄꢇꢉ ꢅꢈ ꢍꢅ
ꢎꢉꢍꢇꢋꢇꢏꢈꢄꢇꢉ
ꢔꢇꢄꢁꢄꢌꢂ
%ꢄꢁꢌꢕꢃꢆꢌꢕꢊꢃꢂ
%ꢄ$ꢄꢌꢕꢊꢃ
ꢌꢍꢍ ꢀꢁꢂꢇꢂꢉ
ꢈꢂꢇꢉꢄꢊꢋꢉꢄꢅꢊꢈꢂꢍꢂꢉꢄꢅꢊ
%ꢕꢁꢍ$ꢆ ꢁꢂꢚꢅꢊꢃꢁꢂ
ꢆꢌꢂꢘꢄꢗꢊꢇ ꢂ
ꢔꢊꢕꢃꢌꢁ
ꢈ 3 &'ꢉ
ꢈ 3 &'ꢉ
ꢋꢌꢆꢇꢌꢁꢂ!ꢊ"ꢌꢄꢂ
ꢅꢆ$ꢅ"$ꢆꢌꢕꢊꢃ
$ꢝ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 37 Friday, July 29, 2005 9:28 AM
ꢈ 3 &'ꢉꢜꢉ$ ꢝ')*ꢜ')#*ꢉ'#ꢉ
: ꢉ$ 3 ' $ꢏ
ꢊꢜ Uurꢁ‚ꢀqrꢀꢁ‚sꢁ‡urꢁqv†ƒyh’rqꢁ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
yv†‡ꢁphꢁirꢁpuhtrqꢃꢁ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
ꢈ 3 &'ꢉꢜꢉ"! ꢝ 'ꢉ*%7: !ꢏ
ꢈ 'ꢉꢜꢉ"! ꢝ 'ꢉ*%7: !ꢉ%ꢝ)*+ꢉ,#%!ꢉ
"! ( !! $ꢉ7 '-#$
ꢈ 3 &'ꢉꢜꢉ"! ꢝ 'ꢉ*%7: !ꢏ
ꢈ 3 &'ꢉ'- ꢉ:%''#*ꢉ
&#!! ꢝ"#*$)*+ꢉ'#ꢉ'- ꢉ)' 7ꢉ'#ꢉ: ꢉ
7#$)() $
ꢈ 3 &'ꢉꢜꢉ"! ꢝ 'ꢉ*%7: !ꢉ
'#ꢉ: ꢉ$ 3 ' $ꢏ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
ꢜꢊ%ꢉꢋꢂꢃꢈꢊꢌꢎꢃꢊꢐꢃꢈꢃꢌꢇꢅꢋꢘ
$C
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 38 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
ꢄꢔꢄꢌꢃꢕꢊꢇꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋꢘ
●=ꢅꢍꢊꢂꢉꢋꢊꢉꢈꢌꢃꢆꢊꢌꢎꢃꢊꢕꢉꢙꢊꢐꢇꢄꢙꢈꢉꢔꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢄ>ꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋꢄꢊꢉꢋꢐꢊꢄꢎꢅꢗꢊꢌꢎꢃꢊ
■ ꢈ'#"ꢉ,#%!ꢉ9 -)&3 ꢉ: (#! ꢉ'- ꢉ(#33#8)*+ꢉ#" !ꢜ')#*ꢝꢏꢉ
ꢒꢅꢊꢋꢅꢌꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢄꢃꢌꢌꢇꢋꢖꢄꢊꢉꢋꢐꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢈꢅꢂꢉꢌꢇꢅꢋꢄꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊꢑꢇꢋꢇꢕꢇꢏꢃꢊꢌꢎꢃꢊꢌꢇꢕꢃꢊ
ꢄꢙꢃꢋꢌꢊꢛꢇꢃꢗꢇꢋꢖꢊꢌꢎꢃꢊꢕꢅꢋꢇꢌꢅꢆꢊꢄꢂꢆꢃꢃꢋꢊꢉꢋꢐꢊꢈꢇꢄꢌꢃꢋꢇꢋꢖꢊꢌꢅꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊ
,ꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢗꢇꢈꢈꢊꢐꢇꢄꢌꢆꢉꢂꢌꢊꢌꢎꢃꢊꢐꢆꢇꢛꢃꢆꢊꢓꢆꢅꢕꢊꢈꢅꢅ4ꢇꢋꢖꢊꢉꢎꢃꢉꢐꢊꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢉꢋꢐꢊꢕꢉꢔꢊ
ꢀꢁꢂꢃꢄꢃꢅ
ꢂꢉꢍꢄꢃꢊꢉꢋꢊꢉꢂꢂꢇꢐꢃꢋꢌꢘꢊ
ꢁꢈꢗꢉꢔꢄꢊꢄꢌꢅꢙꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢋꢊꢉꢊꢄꢉꢓꢃꢊꢈꢅꢂꢉꢌꢇꢅꢋꢊꢉꢋꢐꢊꢙꢍꢌꢊꢌꢎꢃꢊꢙꢉꢆ4ꢇꢋꢖꢊ2ꢆꢉ4ꢃꢊꢅꢋꢊ2ꢃꢓꢅꢆꢃꢊꢅꢙꢃꢆꢉꢌꢇꢋꢖꢊ
ꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢘ
ENTER
ENTER
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢇ
ꢇ
ꢊ
MENU
ꢊ.ꢊ
ꢊ.ꢊ
ꢊ.ꢊ
ꢊꢙꢉꢖꢃꢊ$E/
ꢊꢙꢉꢖꢃꢊ(+/
ꢊꢙꢉꢖꢃꢊ( /
ꢎꢋꢃꢁꢅ
ꢏꢐꢑꢒꢓꢔꢑꢕꢓꢎꢐꢅꢖꢀꢕꢅꢗꢘꢙ
ꢊ.ꢊ
ꢊ.ꢊ
ꢊ.ꢊ
ꢊꢙꢉꢖꢃꢊ( /
ꢊꢙꢉꢖꢃꢊ(ꢀ/
ꢊꢙꢉꢖꢃꢊ((/
$*
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 39 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢂꢆꢆꢇ ꢈ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
ENTER
ENTER
ꢊ
ꢊ
ꢊꢃꢁꢈꢁꢂꢉꢇ
ꢇ
ꢊ
MENU
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ENTER
ENTER
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢆꢇꢄꢈꢅꢃꢏꢄꢅ
ꢇꢈꢎꢊ ꢄꢎꢊꢉꢉꢌꢍꢒꢎꢏꢄ
ꢉꢎꢑꢄꢄꢈ
■ ꢔꢁꢊꢉꢀ#3#!
&ꢃꢈꢃꢂꢌꢊꢉꢊꢄꢂꢆꢃꢃꢋꢊꢂꢅꢈꢅꢆꢊꢓꢆꢅꢕꢊ
ꢊꢅꢓꢊ
ꢊꢅꢙꢌꢇꢅꢋꢄꢘ
■ ꢔꢜ"ꢉꢔ#$
ꢈ 3 &'ꢉ"ꢜ+ ꢉ
●ꢁꢍꢌꢅ ꢊꢜ 9ꢎꢃꢊꢐꢇꢄꢙꢈꢉꢔꢊꢗꢇꢈꢈꢊꢉꢍꢌꢅꢕꢉꢌꢇꢂꢉꢈꢈꢔꢊꢄꢗꢇꢌꢂꢎꢊ2ꢃꢌꢗꢃꢃꢋꢊꢒꢉꢔꢊ
ꢉꢋꢐꢊ#ꢇꢖꢎꢌꢊꢇꢈꢈꢍꢕꢇꢋꢉꢌꢇꢅꢋꢊꢕꢅꢐꢃꢊꢗꢎꢃꢋꢊꢌꢎꢃꢊꢎꢃꢉꢐꢈꢇꢖꢎꢌꢄꢊꢉꢆꢃꢊ
ꢌꢍꢆꢋꢃꢐꢊꢅꢓꢓꢊꢉꢋꢐꢊꢅꢋꢊꢆꢃꢄꢙꢃꢂꢌꢇꢛꢃꢈꢔꢘ
●ꢒꢉꢔ ꢊꢜ Uurꢀqv†ƒyh’ꢀvyyꢀirꢀƒꢁr†r‡rqꢀvꢀ9h’ꢀvyyˆ€vh‡v‚ꢀ€‚qrꢀ
ꢁrthꢁqyr††ꢀ‚sꢀur‡urꢁꢀ‡urꢀurhqyvtu‡†ꢀhꢁrꢀ‚ꢀ‚ꢁꢀ‚ssꢂ
●.ꢂꢊꢁꢐ ꢄꢕ ꢀꢁꢋꢄꢅꢂꢃꢆꢇ ꢈꢄ&ꢂꢇꢇꢄꢍꢋꢄꢆꢑꢋꢃꢋꢉꢐꢋꢅꢄꢂꢉꢄ.ꢂꢊꢁꢐꢄꢂꢇꢇꢏꢝꢂꢉ ꢐꢂꢖꢉꢄꢝꢖꢅꢋꢄ
ꢑꢋꢊ ꢑꢅꢇꢋꢃꢃꢄꢖꢜꢄ&ꢁꢋꢐꢁꢋꢑꢄꢐꢁꢋꢄꢁꢋ ꢅꢇꢂꢊꢁꢐꢃꢄ ꢑꢋꢄꢖꢉꢄꢖꢑꢄꢖꢜꢜꢒꢄ
■ ꢌ)ꢝ'ꢜ*&
&ꢃꢈꢃꢂꢌꢊꢌꢎꢃꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢍꢋꢇꢌꢊꢓꢆꢅꢕꢊ
ꢊꢅꢆꢊ
ꢘ
■ ꢆ#')(,ꢉ'!ꢜ(()&ꢉ! ꢝ'!)&')#*
9ꢎꢃꢊꢐꢇꢄꢙꢈꢉꢔꢊꢅꢓꢊꢗꢉꢆꢋꢇꢋꢖꢄꢊꢐꢍꢆꢇꢋꢖꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢗꢎꢃꢋꢊꢙꢉꢄꢄꢇꢋꢖꢊ
ꢌꢎꢆꢅꢍꢖꢎꢊꢉꢆꢃꢉꢄꢊꢗꢇꢌꢎꢊꢌꢆꢉꢓꢓꢇꢂꢊꢆꢃꢄꢌꢆꢇꢂꢌꢇꢅꢋꢄꢊꢂꢉꢋꢊ2ꢃꢊꢌꢍꢆꢋꢃꢐꢊꢅꢋꢊꢅꢆꢊꢅꢓꢓꢊ
■ ꢁ!!)9ꢜ3ꢉꢃ)7
9ꢎꢃꢊꢌꢇꢕꢃꢊꢗꢎꢇꢂꢎꢊꢇꢄꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢍꢋꢌꢇꢈꢊꢌꢎꢃꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢅꢆꢊꢉꢊꢗꢉꢔꢊꢙꢅꢇꢋꢌꢊ
ꢂꢉꢋꢊ2ꢃꢊꢄꢃꢌꢊꢉꢄꢊꢉꢋꢊꢃꢄꢌꢇꢕꢉꢌꢃꢐꢊꢉꢆꢆꢇꢛꢉꢈꢊꢌꢇꢕꢃꢊꢅꢆꢊꢌꢎꢃꢊꢆꢃꢕꢉꢇꢋꢇꢋꢖꢊꢌꢇꢕꢃꢘꢊ
■
#8ꢉ'#ꢉ 6)'
&ꢃꢈꢃꢂꢌꢊ
ꢐꢇꢄꢙꢈꢉꢔꢊꢌꢎꢃꢊꢆꢃꢕꢉꢇꢋꢇꢋꢖꢊꢌꢇꢕꢃꢘ
ꢊꢌꢅꢊꢐꢇꢄꢙꢈꢉꢔꢊꢌꢎꢃꢊꢃꢄꢌꢇꢕꢉꢌꢃꢐꢊꢉꢆꢆꢇꢛꢉꢈꢊꢌꢇꢕꢃ>ꢊꢅꢆꢊ
ꢊꢌꢅꢊ
$E
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 40 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢂꢆꢆꢇ ꢈ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
ENTER
ENTER
ꢊ
ꢊ
ꢊꢃꢁꢈꢁꢂꢉꢇ
ꢇ
ꢊ
MENU
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ENTER
ENTER
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢆꢇꢄꢈꢅꢃꢏꢄꢅ
ꢇꢈꢎꢊ ꢄꢎꢊꢉꢉꢌꢍꢒꢎꢏꢄ
ꢉꢎꢑꢄꢄꢈ
■ < ,:#ꢜ!$ꢉ3ꢜ,#%'
9ꢎꢃꢊꢈꢉꢔꢅꢍꢌꢊꢅꢓꢊꢇꢋꢙꢍꢌꢊ4ꢃꢔꢄꢊꢂꢉꢋꢊ2ꢃꢊꢄꢃꢈꢃꢂꢌꢃꢐꢊꢉꢄꢊ
ꢊꢅꢆꢊ
ꢘ
■ ꢚ%)$ꢜ*& ꢉꢈ&! *
ꢈ 3 &'ꢉ"ꢜ+ ꢉ
&ꢃꢈꢃꢂꢌꢊꢗꢎꢃꢌꢎꢃꢆꢊ0ꢋꢈꢉꢆꢖꢃꢐꢊJꢍꢋꢂꢌꢇꢅꢋꢊꢐꢇꢉꢖꢆꢉꢕꢊꢄꢂꢆꢃꢃꢋꢊꢇꢄꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊ
ꢉꢍꢌꢅꢕꢉꢌꢇꢂꢉꢈꢈꢔꢘ
■ (! 8ꢜ,ꢉ)*(#!7ꢜ')#*
ꢁꢈꢈꢅꢗꢄꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢊꢅꢓꢊꢗꢎꢃꢌꢎꢃꢆꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢄꢂꢆꢃꢃꢋꢊꢇꢄꢊꢌꢅꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊ
ꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢊꢅꢋꢊꢓꢆꢃꢃꢗꢉꢔꢘ
■ ꢀ3#&5
ꢁꢈꢈꢅꢗꢄꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢊꢅꢓꢊꢗꢎꢃꢌꢎꢃꢆꢊꢂꢈꢅꢂ4ꢊꢇꢄꢊꢌꢅꢊ2ꢃꢊꢐꢇꢄꢙꢈꢃꢔꢃꢐꢘ
ꢈ 3 &'ꢉ"ꢜ+ ꢉ
■ ꢒ "
ꢁꢈꢈꢅꢗꢄꢊꢄꢃꢈꢃꢂꢌꢇꢅꢋꢊꢅꢓꢊꢗꢎꢃꢌꢎꢃꢆꢊ2ꢃꢃꢙꢊꢗꢇꢈꢈꢊꢄꢅꢍꢋꢐꢘ
■
#8ꢉ'#ꢉ 6)'
(!
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 41 Friday, July 29, 2005 9:28 AM
ꢉꢊꢇꢋꢌꢄꢍꢎꢏꢄꢅꢂꢐꢂꢋꢆꢇꢑ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
9ꢎꢇꢄꢊꢓꢍꢋꢂꢌꢇꢅꢋꢊꢉꢈꢈꢅꢗꢄꢊꢔꢅꢍꢊꢄꢃꢌꢊꢌꢎꢃꢊꢂꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊꢅꢋꢊꢌꢎꢃꢊꢉꢆꢃꢉꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢗꢎꢃꢋꢊꢌꢎꢃꢊ. ꢅꢇꢋꢌꢊꢅꢓꢊꢇꢋꢌꢃꢆꢃꢄꢌ/ꢊ
ꢕꢃꢋꢍꢊꢇꢄꢊꢄꢃꢈꢃꢂꢌꢃꢐꢊꢅꢋꢊꢌꢎꢃꢊꢕꢉꢙꢘꢊOꢍꢇꢂ4ꢊ ,'ꢊꢃꢋꢉ2ꢈꢃꢄꢊꢔꢅꢍꢊꢄꢌꢅꢆꢃꢊꢍꢙꢊꢌꢅꢊꢄꢇ;ꢊꢐꢇꢓꢓꢃꢆꢃꢋꢌꢊ4ꢇꢋꢐꢄꢊꢂꢉꢌꢃꢖꢅꢆꢔꢊ
ꢗꢎꢇꢂꢎꢊꢔꢅꢍꢊꢍꢄꢃꢊꢕꢅꢄꢌꢊꢆꢃꢖꢍꢈꢉꢆꢈꢔꢘ
ENTER
ENTER
ꢊ
ꢊ
ꢊꢃꢁꢈꢁꢂꢉꢇ
ꢇ
ꢊ
MENU
+
ꢀ
ENTER
ENTER
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢅ" *ꢉ'- ꢉEꢛꢂꢄꢀ<ꢉꢊꢅꢄꢉꢈꢎꢍꢎꢀꢃꢄꢅꢆFꢉꢝ&! *
ꢈ 3 &'ꢉ'- ꢉ:%''#*ꢉ(#!ꢉꢛ%)&5ꢉꢊꢅꢄꢉꢝ'#!ꢜ+ ꢏ
Note
●&ꢃꢈꢃꢂꢌꢊꢌꢎꢃꢊꢂꢉꢌꢃꢖꢅꢆꢔꢊꢌꢅꢊ2ꢃꢊꢂꢎꢉꢋꢖꢃꢐ
ꢊꢜ9ꢎꢇꢄꢊ2ꢍꢌꢌꢅꢋꢊꢉꢈꢈꢅꢗꢄꢊꢔꢅꢍꢊꢌꢅꢊꢆꢃꢄꢌꢅꢆꢃꢊꢌꢎꢃꢊꢓꢉꢂꢌꢅꢆꢔꢊꢄꢃꢌꢌꢇꢋꢖꢘ
ꢈ 3 &'ꢉꢜꢉ&ꢜ' +#!,ꢏ
,ꢋꢂꢃꢊꢄꢃꢈꢃꢂꢌꢃꢐ>ꢊꢄꢍ2ꢂꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊꢗꢇꢈꢈꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢘ
ꢊꢜ&ꢍ2ꢂꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊꢓꢆꢅꢕꢊꢉꢈꢈꢊꢅꢓꢊꢌꢎꢃꢊ
ꢇꢋꢐꢇꢛꢇꢐꢍꢉꢈꢊꢂꢉꢌꢃꢖꢅꢆꢇꢃꢄꢊꢗꢇꢈꢈꢊ2ꢃꢊ
ꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢌꢅꢖꢃꢌꢎꢃꢆꢘ
ꢈ 3 &'ꢉ'- ꢉꢝ%:&ꢜ' +#!) ꢝꢉ'#ꢉ: ꢉ$)ꢝ"3ꢜ, $ꢉ#*ꢉ'- ꢉ
7ꢜ"ꢏ
8ꢃꢙꢃꢉꢌꢊꢌꢎꢃꢊꢉ2ꢅꢛꢃꢊꢄꢌꢃꢙꢄꢊꢌꢅꢊꢉꢐꢐꢊꢓꢍꢆꢌꢎꢃꢆꢊ ,'ꢊꢕꢉꢆ4ꢃꢆꢄꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢅꢋꢊꢌꢎꢃꢊꢕꢃꢋꢍꢘ
(+
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 42 Friday, July 29, 2005 9:28 AM
ꢒꢓꢐꢇꢔꢃꢓꢆꢇꢑ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
9ꢎꢇꢄꢊꢓꢍꢋꢂꢌꢇꢅꢋꢊꢉꢈꢈꢅꢗꢄꢊꢔꢅꢍꢊꢌꢅꢊꢂꢅꢆꢆꢃꢂꢌꢊꢉꢋꢔꢊꢃꢆꢆꢅꢆꢊꢇꢋꢊꢌꢎꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢅꢆꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢊꢅꢓꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃꢊꢐꢇꢄꢙꢈꢉꢔꢘ
ENTER
MENU
EN
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢁ$C%ꢝ')*+ꢉꢀ%!! *'ꢉꢊ#ꢝ)')#*ꢉꢜ*$ꢉꢌ)! &')#*
ꢊꢄꢃꢈꢃꢂꢌꢊ ꢊ ꢊ
,ꢙꢃꢋꢊꢌꢎꢃꢊH ꢅꢄꢇꢌꢇꢅꢋꢊꢂꢉꢈꢇ2ꢆꢉꢌꢇꢅꢋIꢊꢄꢂꢆꢃꢃꢋ
ꢈ 'ꢉꢀ3#&
ꢉꢊ7
ENTER
ENTER
ENTER
ꢊꢄꢃ
ENTER
ꢑꢅꢛꢃꢊ ꢊꢌꢅꢊꢌꢎꢃꢊꢂꢅꢆꢆꢃꢂꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢉꢋꢐꢊꢄꢃꢈꢃꢂꢌꢊ
ꢘ
5ꢄꢃꢊ
ꢊꢅꢆꢊ
ꢊꢌꢅꢊꢉꢐ<ꢍꢄꢌꢊꢌꢎꢃꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢊꢇꢋꢊꢗꢎꢇꢂꢎꢊꢔꢅꢍꢊꢉꢆꢃꢊꢎꢃꢉꢐꢇꢋꢖ>ꢊ
ꢘ
ꢉꢋꢐꢊꢄꢃꢈꢃꢂꢌꢊ
ꢓꢍꢋꢂꢌꢇꢅꢋꢘ
ꢌ)ꢝ'ꢜ*&
9ꢎꢇꢄꢊꢓꢍꢋꢂꢌꢇꢅꢋꢊꢉꢍꢌꢅꢕꢉꢌꢇꢂꢉꢈꢈꢔꢊꢂꢅꢆꢆꢃꢂꢌꢄꢊꢉꢋꢔꢊꢃꢆꢆꢅꢆꢊꢇꢋꢊꢌꢎꢃꢊꢐꢇꢄꢙꢈꢉꢔꢊꢅꢓꢊꢌꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢌꢎꢉꢌꢊ
ꢕꢇꢖꢎꢌꢊꢅꢂꢂꢍꢆꢊꢉꢓꢌꢃꢆꢊꢌꢇꢆꢃꢊꢆꢃꢙꢈꢉꢂꢃꢕꢃꢋꢌꢘ
ENTER
ꢊꢄꢃ
ENTER
ENTER
ꢊ ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢒꢇꢄꢌꢉꢋꢂꢃꢊꢇꢄꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐ
=ꢅꢍꢊꢗꢇꢈꢈꢊꢎꢉꢛꢃꢊꢌꢅꢊꢐꢆꢇꢛꢃꢊꢉ2ꢅꢍꢌꢊꢝꢊꢕꢇꢈꢃꢄꢊ.+!ꢊ4ꢕ/ꢊ2ꢃꢓꢅꢆꢃꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢂꢅꢆꢆꢃꢂꢌꢇꢅꢋꢊꢇꢄꢊꢂꢅꢕꢙꢈꢃꢌꢃꢘ
(ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 43 Friday, July 29, 2005 9:28 AM
ENTER
ENTER
ENTER
ꢊ
ꢊ
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢈ 'ꢉꢀ3#&5
9ꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊꢌꢇꢕꢃꢊꢇꢄꢊꢄꢃꢌꢊꢍꢄꢇꢋꢖꢊꢌꢎꢇꢄꢊꢓꢍꢋꢂꢌꢇꢅꢋꢘꢊ&ꢇꢋꢂꢃꢊꢌꢇꢕꢃꢊꢋꢅꢌꢇꢓꢇꢂꢉꢌꢇꢅꢋꢊꢇꢄꢊꢙꢆꢅꢛꢇꢐꢃꢐꢊ2ꢔꢊ
ꢉꢊ7 &ꢊꢄꢉꢌꢃꢈꢈꢇꢌꢃ>ꢊꢌꢇꢕꢃ?ꢏꢅꢋꢃꢊꢉꢐ<ꢍꢄꢌꢕꢃꢋꢌꢊꢂꢉꢋꢊ2ꢃꢊꢂꢉꢆꢆꢇꢃꢐꢊꢅꢍꢌꢊꢉꢍꢌꢅꢕꢉꢌꢇꢂꢉꢈꢈꢔꢘ
ENTER
ENTER
ꢊ ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
NTER
ꢘ
,ꢙꢃꢋꢊꢌꢎꢃꢊH&09ꢊ%",%AIꢊꢄꢂꢆꢃꢃꢋ
&ꢃꢈꢃꢂꢌꢊ
ꢊꢇꢓꢊꢔꢅꢍꢊꢗꢅꢍꢈꢐꢊꢙꢆꢃꢓꢃꢆꢊꢀ(?ꢎꢅꢍꢆꢊꢐꢇꢄꢙꢈꢉꢔ@ꢊ
ꢊꢓꢅꢆꢊ+ꢀ?ꢎꢅꢍꢆꢊꢐꢇꢄꢙꢈꢉꢔꢘ
&ꢃꢈꢃꢂꢌꢊ ꢊꢌꢅꢊꢕꢅꢛꢃꢊꢌꢎꢃꢊꢄꢃꢌꢌꢇꢋꢖꢊꢉꢎꢃꢉꢐꢊ2ꢔꢊꢅꢋꢃꢊꢎꢅꢍꢆ>ꢊ
ꢉꢋꢐꢊꢄꢇꢕꢇꢈꢉꢆꢈꢔ>ꢊꢄꢃꢈꢃꢂꢌꢊ ꢊꢌꢅꢊꢕꢅꢛꢃꢊꢇꢌꢊ2ꢉꢂ4ꢊ2ꢔꢊꢅꢋꢃꢊ
ꢎꢅꢍꢆꢘ
ꢎꢊꢔꢅꢍꢊꢉꢆꢃꢊꢎꢃꢉꢐꢇꢋꢖ>ꢊ
1ꢅꢗꢊꢌꢅꢊꢃ;ꢇꢌꢊ
ꢘ
ꢔꢜ"ꢉꢑ !ꢝ)#*
9ꢎꢃꢊꢕꢉꢙꢊꢉꢋꢐꢊꢄꢅꢓꢌꢗꢉꢆꢃꢊꢛꢃꢆꢄꢇꢅꢋꢊꢋꢍꢕ2ꢃꢆꢄꢊꢂꢉꢋꢊ2ꢃꢊꢂꢅꢋꢓꢇꢆꢕꢃꢐꢊ2ꢔꢊꢍꢄꢇꢋꢖꢊꢌꢎꢇꢄꢊ
ꢓꢍꢋꢂꢌꢇꢅꢋꢘ
ꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢌꢎꢉꢌꢊ
ꢌꢇꢅꢋꢊꢇꢄꢊꢂꢅꢕꢙꢈꢃꢌꢃꢘ
ENTER
ENTER
ꢊ ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢑꢉꢙꢊꢉꢋꢐꢊꢄꢅꢓꢌꢗꢉꢆꢃꢊꢛꢃꢆꢄꢇꢅꢋꢄꢊꢉꢆꢃꢊꢋꢅꢗꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢘ
($
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 44 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢁꢆꢇ ꢂꢃꢁꢈꢆꢉꢁꢊꢋꢌꢍꢃꢂ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
9ꢎꢇꢄꢊꢓꢍꢋꢂꢌꢇꢅꢋꢊꢆꢃꢙꢈꢉꢂꢃꢄꢊꢉꢈꢈꢊꢌꢎꢃꢊꢄꢃꢌꢌꢇꢋꢖꢄꢊꢇꢋꢊꢌꢎꢃꢊꢕꢅ2ꢇꢈꢃꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊꢇꢋꢇꢌꢇꢉꢈꢊꢐꢃꢓꢉꢍꢈꢌꢊ
ꢄꢃꢌꢌꢇꢋꢖꢄꢘ
ENTER
ENTER
ꢊ
ꢊ
ꢊꢃꢁꢈꢁꢂꢉꢇ
ꢇ
ꢊ
MENU
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ENTER
ENTER
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢅ" *ꢉ'- ꢉEꢈꢘꢈꢃꢎꢔꢉꢌꢎꢗꢁꢂꢍꢃꢈFꢉꢝ&! *
ꢈ 3 &'ꢉ
ꢏ
ꢊꢜ8ꢃꢄꢌꢅꢆꢃꢄꢊꢌꢎꢃꢊꢉꢛꢃꢆꢉꢖꢃꢊꢄꢙꢃꢃꢐꢊꢄꢃꢌꢌꢇꢋꢖꢊꢌꢅꢊꢌꢎꢃꢊꢇꢋꢇꢌꢇꢉꢈꢊ
ꢛꢉꢈꢍꢃꢊꢍꢙꢅꢋꢊꢓꢉꢂꢌꢅꢆꢔꢊꢄꢃꢌꢌꢇꢋꢖꢘ
'ꢓꢊꢔꢅꢍꢊꢃ;ꢃꢂꢍꢌꢃꢊ8ꢃꢄꢌꢅꢆꢃꢊ&ꢔꢄꢌꢃꢕꢊꢒꢃꢓꢉꢍꢈꢌꢄ>ꢊꢉꢈꢈꢊꢅꢓꢊꢔꢅꢍꢆꢊ&ꢌꢅꢆꢃꢐꢊꢄꢃꢌꢌꢇꢋꢖꢊꢐꢉꢌꢉꢊꢗꢇꢈꢈꢊ2ꢃꢊꢐꢃꢈꢃꢌꢃꢐꢘ
Eꢌ (ꢜ%3'ꢉꢍ)ꢝ'F
'ꢌꢃꢕ
'ꢋꢇꢌꢇꢉꢈꢊꢂꢅꢋꢐꢇꢌꢇꢅꢋ
ꢔ *%ꢉ*ꢜ7 ꢝ
)ꢅꢆꢊꢕꢉꢙꢄꢊ.ꢅꢋꢃꢊꢄꢂꢆꢃꢃꢋꢊꢉꢋꢐꢊꢐꢍꢉꢈꢊꢊꢄꢂꢆꢃꢃꢋ/
ꢑꢉꢙꢊꢐꢇꢄꢙꢈꢉꢔꢊꢕꢅꢐꢃ
#ꢅꢆꢌꢎꢊꢍꢙ
ꢄꢇꢋꢖꢈꢃ?ꢄꢂꢆꢃꢃꢋꢊꢐꢇꢄꢙꢈꢉꢔ
Hhƒꢀ9v†ƒyh’ꢀ†phyrꢁHhƒꢀ†phyrꢀs‚ꢂꢀ9ˆhyꢃ†pꢂrrꢀv†ꢀ‚‡ꢀ‚iwrp‡ꢀ‚sꢀihpxˆƒꢄ
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢅꢅꢂꢉꢊꢋꢌꢍꢌꢌꢌꢊꢎꢏꢐꢊꢑꢋꢒꢋꢓꢊꢎꢁꢔ
9ˆhyꢃ†pꢂrr)ꢀ#ꢅꢆꢅꢅꢅꢀ€hƒꢀꢇ ꢁ#ꢀ€vꢈ
ꢒꢇꢄꢙꢈꢉꢔꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢈꢉꢋꢖꢍꢉꢖꢃ
O? ,'ꢊꢕꢉꢙꢊꢐꢇꢄꢙꢈꢉꢔ
O? ,'ꢊ&ꢃꢈꢃꢂꢌꢇꢅꢋ
0ꢋꢖꢈꢇꢄꢎ
ꢁꢈꢈꢊ,ꢓꢓ
ꢁꢊꢜꢊ7ꢉꢄꢊꢄꢌꢉꢌꢇꢅꢋ
3ꢊꢜꢊꢁ9ꢑ
%ꢊꢜꢊ ꢉꢆ4ꢇꢋꢖ
ꢒꢊꢜꢊ7ꢆꢅꢂꢃꢆꢔꢊꢄꢌꢅꢆꢃ
0ꢊꢜꢊꢁꢈꢈꢊ8ꢃꢄꢌꢉꢍꢆꢉꢋꢌ
)ꢊꢜꢊ1ꢅꢌꢃꢈ
&ꢃꢉꢆꢂꢎꢊꢁꢆꢃꢉ
5Eꢊ.ꢇꢋꢂꢈꢍꢐꢇꢋꢖꢊꢚꢉꢄꢎꢇꢋꢖꢌꢅꢋꢊꢒ%/
ꢑꢉꢙꢊ%ꢅꢈꢅꢆ
+
ꢒꢉꢔ-#ꢇꢖꢎꢌ-ꢁꢍꢌꢅꢊ&ꢃꢌꢌꢇꢋꢖ
ꢒꢇꢄꢌꢉꢋꢂꢃꢊ5ꢋꢇꢌꢄꢊ.ꢑꢇꢈꢃꢄ-Aꢑ/ꢊ.7ꢈꢅ2ꢉꢈꢊꢄꢃꢌꢌꢇꢋꢖ/
6ꢅꢈꢍꢕꢃꢊ ꢆꢃꢄꢃꢌꢄ
ꢁꢍꢌꢅ
ꢑꢇꢈꢃꢄ
(ꢊ.+ꢊꢌꢅꢊC/
,ꢋ
8ꢇꢖꢎꢌꢊ&ꢂꢆꢃꢃꢋꢊ&ꢃꢌꢌꢇꢋꢖ>ꢊ ,'
Uv€rꢀqv†ƒyh’ꢀpuhtrꢀꢇ !uꢁ!#uꢈ
Aꢃꢔ2ꢅꢉꢆꢐꢊꢈꢉꢔꢅꢍꢌ
ꢀ(ꢎ
ꢁ3%
9ꢇꢕꢃ
,ꢓꢓ
ꢁꢆꢆꢇꢛꢉꢈꢊ9ꢇꢕꢃ
#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢃꢌꢍꢙꢊ.%ꢈꢅꢂ4/
#ꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊ&ꢃꢌꢍꢙꢊ.3ꢃꢃꢙ/
ꢔꢜ"ꢉ$)ꢝ"3ꢜ,
,ꢋ
ꢓꢆꢃꢃꢗꢉꢔꢊ'ꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋ
7ꢍꢇꢐꢉꢋꢂꢃꢊ&ꢂꢆꢃꢃꢋ
,ꢓꢓ
,#
((
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 45 Friday, July 29, 2005 9:28 AM
ꢕꢓ ꢈꢊꢓꢈꢂ
ꢀꢁꢂꢃꢄꢁꢅꢃꢆꢇ ꢈꢉꢅ ꢊꢋ
=ꢅꢍꢊꢂꢉꢋꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢈꢉꢋꢖꢍꢃꢖꢃꢊꢅꢓꢊꢌꢎꢃꢊꢕꢃꢋꢍꢊꢉꢋꢐꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢘ
ENTER
ENTER
ꢊ
ꢊ
ꢊꢃꢁꢈꢁꢂꢉꢇ
ꢇ
ꢊ
MENU
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ENTER
ENTER
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢅ" *ꢉ'- ꢉEꢍꢁꢆꢚꢂꢁꢚꢎFꢉꢝ&! *
ꢈ 3 &'ꢉ,#%!ꢉ"! ( !! $ꢉ3ꢜ*+%ꢜ+ ꢉ(!#7ꢉ'- ꢉ3)ꢝ'ꢏ
ꢖꢑꢐꢊꢗꢂꢄꢘꢙꢚꢊꢁꢆꢗꢂ ꢆ
=ꢅꢍꢊꢂꢉꢋꢊꢉꢐ<ꢍꢄꢌꢊꢌꢎꢃꢊꢛꢅꢈꢍꢕꢃꢊꢂꢅꢋꢌꢆꢅꢈꢊꢓꢅꢆꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢘ
ENTER
ENTER
ꢊ
ꢊ
ꢊꢃꢁꢈꢁꢂꢉꢇ
ꢇ
ꢊ
MENU
ꢈꢄꢉꢊꢇꢄꢂꢋꢌꢄꢍꢁ
ENTER
ENTER
ꢊ
ꢊꢄꢃꢈꢃꢂꢌꢊ
ꢊ
ꢊ
ꢅ" *ꢉ'- ꢉEꢑꢅꢍꢂꢔꢎFꢉꢝ&! *
ꢈ 3 &'ꢉ'- ꢉꢜ""!#"!)ꢜ' ꢉ:%''#*ꢉ'#ꢉꢝ 'ꢉ'- ꢉ9#3%7 ꢉ
'#ꢉ: '8 *ꢉ ꢉ=7)*)7%7>ꢉꢜ*$ꢉ ꢉ=7ꢜ6)7%7>ꢏ
ꢊꢜ&ꢅꢍꢋꢐꢊꢅꢍꢌꢙꢍꢌꢊꢗꢇꢈꢈꢊ2ꢃꢊꢕꢍꢌꢃꢐꢘ
(
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 46 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢉꢆꢂꢍꢎꢀꢂꢁꢏ ꢁꢍꢄꢈꢃꢂ
ꢑ#)& ꢉꢚ%)$ꢜ*&
● 9ꢎꢃꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊꢇꢄꢊ<ꢍꢄꢌꢊꢉꢊꢄꢍꢙꢙꢅꢆꢌꢊꢄꢔꢄꢌꢃꢕꢊꢓꢅꢆꢊꢌꢎꢃꢊꢐꢆꢇꢛꢃꢆꢘꢊ9ꢎꢃꢊꢐꢆꢇꢛꢃꢆꢊꢄꢎꢅꢍꢈꢐꢊ
ꢉꢈꢗꢉꢔꢄꢊꢙꢉꢔꢊꢉꢌꢌꢃꢋꢌꢇꢅꢋꢊꢌꢅꢊꢌꢎꢃꢊꢌꢆꢉꢓꢓꢇꢂꢊꢄꢇꢌꢍꢉꢌꢇꢅꢋꢊꢌꢅꢊꢄꢉꢓꢃꢈꢔꢊꢕꢉ4ꢃꢊꢐꢃꢂꢇꢄꢇꢅꢋꢄꢘꢊ=ꢅꢍꢊꢕꢉꢔꢊ
2ꢃꢊꢍꢋꢉ2ꢈꢃꢊꢉꢌꢊꢌꢇꢕꢃꢄꢊꢌꢅꢊꢉꢆꢆꢇꢛꢃꢊꢉꢌꢊꢔꢅꢍꢆꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢐꢍꢃꢊꢌꢅꢊꢅꢍꢌ?ꢅꢓ?ꢐꢉꢌꢃꢊꢇꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋꢊ
ꢅꢋꢊꢉꢊꢕꢉꢙꢊꢐꢇꢄꢂꢘꢊ=ꢅꢍꢊꢄꢎꢅꢍꢈꢐꢊ2ꢃꢊꢃꢄꢙꢃꢂꢇꢉꢈꢈꢔꢊꢂꢉꢆꢃꢓꢍꢈꢊꢗꢎꢃꢋꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢉꢋꢊꢍꢆꢖꢃꢋꢌꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢄꢍꢂꢎꢊꢉꢄꢊꢉꢊꢎꢅꢄꢙꢇꢌꢉꢈꢊꢅꢆꢊꢉꢊꢙꢅꢈꢇꢂꢃꢊꢄꢌꢉꢌꢇꢅꢋꢘ
ꢀꢁꢂꢃꢄꢃꢅꢆ
● =ꢅꢍꢆꢊꢆꢅꢍꢌꢃꢊꢕꢉꢔꢊꢄꢅꢕꢃꢌꢇꢕꢃꢄꢊꢇꢋꢂꢈꢍꢐꢃꢊꢆꢅꢉꢐꢄꢊꢌꢎꢉꢌꢊꢉꢆꢃꢊꢋꢅꢌꢊꢅꢙꢃꢋꢊꢌꢅꢊꢛꢃꢎꢇꢂꢈꢃꢄꢊꢅꢆꢊꢉꢆꢃꢊ
ꢂꢈꢅꢄꢃꢐꢊꢐꢍꢃꢊꢌꢅꢊꢌꢆꢉꢓꢓꢇꢂꢊꢆꢃꢖꢍꢈꢉꢌꢇꢅꢋꢄꢘꢊ ꢈꢃꢉꢄꢃꢊꢂꢅꢕꢙꢈꢔꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊꢈꢅꢂꢉꢈꢊꢌꢆꢉꢓꢓꢇꢂꢊ
ꢆꢃꢖꢍꢈꢉꢌꢇꢅꢋꢄꢘ
● ꢒꢅꢊꢋꢅꢌꢊꢂꢎꢉꢋꢖꢃꢊꢌꢎꢃꢊꢄꢃꢌꢌꢇꢋꢖꢄꢊꢉꢋꢐꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢈꢅꢂꢉꢌꢇꢅꢋꢄꢊꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊꢑꢇꢋꢇꢕꢇꢏꢃꢊ
ꢌꢎꢃꢊꢌꢇꢕꢃꢊꢄꢙꢃꢋꢌꢊꢛꢇꢃꢗꢇꢋꢖꢊꢌꢎꢃꢊꢕꢅꢋꢇꢌꢅꢆꢊꢄꢂꢆꢃꢃꢋꢊꢉꢋꢐꢊꢈꢇꢄꢌꢃꢋꢇꢋꢖꢊꢌꢅꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊ
ꢗꢎꢇꢈꢃꢊꢐꢆꢇꢛꢇꢋꢖꢘꢊ,ꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢗꢇꢈꢈꢊꢐꢇꢄꢌꢆꢉꢂꢌꢊꢌꢎꢃꢊꢐꢆꢇꢛꢃꢆꢊꢓꢆꢅꢕꢊꢈꢅꢅ4ꢇꢋꢖꢊꢉꢎꢃꢉꢐꢊ
ꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢉꢋꢐꢊꢕꢉꢔꢊꢂꢉꢍꢄꢃꢊꢉꢋꢊꢉꢂꢂꢇꢐꢃꢋꢌꢘꢊꢁꢈꢗꢉꢔꢄꢊꢄꢌꢅꢙꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢋꢊꢉꢊꢄꢉꢓꢃꢊ
ꢈꢅꢂꢉꢌꢇꢅꢋꢊꢉꢋꢐꢊꢍꢄꢃꢊꢌꢎꢃꢊꢙꢉꢆ4ꢇꢋꢖꢊ2ꢆꢉ4ꢃꢊ2ꢃꢓꢅꢆꢃꢊꢅꢙꢃꢆꢉꢌꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢘ
ꢑ#)& ꢉ+%)$ꢜ*& ꢉ-ꢜꢝꢉ'- ꢉ(#33#8)*+ꢉ(%*&')#*ꢝꢇ
■ ꢄ*' !ꢝ &')#*ꢉ+%)$ꢜ*&
●9ꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢛꢅꢇꢂꢃꢊꢉꢋꢋꢅꢍꢋꢂꢃꢄꢊꢌꢎꢃꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢌꢅꢊꢉꢋꢊꢍꢙꢂꢅꢕꢇꢋꢖꢊꢌꢍꢆꢋꢊꢉꢋꢐꢊꢌꢎꢃꢊꢌꢍꢆꢋꢇꢋꢖꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢘ
9ꢎꢇꢄꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢓꢍꢋꢂꢌꢇꢅꢋꢊꢇꢄꢊꢉꢍꢌꢅꢕꢉꢌꢇꢂꢘꢊ9ꢎꢃꢆꢃꢓꢅꢆꢃ>ꢊꢔꢅꢍꢊꢐꢅꢊꢋꢅꢌꢊꢎꢉꢛꢃꢊꢌꢅꢊꢄꢃꢌꢊꢇꢌ>ꢊꢉꢋꢐꢊꢇꢌꢊꢂꢉꢋꢋꢅꢌꢊ2ꢃꢊ
ꢐꢇꢄꢉ2ꢈꢃꢐꢘ
●9ꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢛꢅꢂꢉꢈꢈꢔꢊꢉꢋꢋꢅꢍꢋꢂꢃꢄꢊꢌꢎꢃꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢌꢅꢊꢉꢋꢊꢍꢙꢂꢅꢕꢇꢋꢖꢊꢎꢇꢖꢎꢗꢉꢔꢊ2ꢆꢉꢋꢂꢎꢇꢋꢖꢊꢙꢅꢇꢋꢌꢊꢅꢆꢊ
<ꢍꢋꢂꢌꢇꢅꢋꢘ
Route
Second branching point
First branching point
150m
Roundabout.
Take the second
exit.
Left turn ahead,
then right turn.
100m
In 700m left turn.
ꢚꢎꢃꢋꢊꢌꢗꢅꢊꢇꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋꢄꢊꢉꢆꢃꢊꢂꢈꢅꢄꢃꢊꢌꢅꢖꢃꢌꢎꢃꢆ>ꢊꢌꢎꢃꢊ
ꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢕꢉꢔꢊ2ꢃꢊꢈꢉꢌꢃꢘ
ꢚꢎꢃꢋꢊꢌꢗꢅꢊꢆꢅꢍꢋꢐꢉ2ꢅꢍꢌꢄꢊꢉꢆꢃꢊꢂꢈꢅꢄꢃꢊꢌꢅꢖꢃꢌꢎꢃꢆ>ꢊꢌꢎꢃꢊ
ꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢓꢅꢆꢊꢌꢎꢃꢊꢄꢃꢂꢅꢋꢐꢊꢕꢉꢔꢊ2ꢃꢊꢈꢉꢌꢃꢘ
(ꢝ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 47 Friday, July 29, 2005 9:28 AM
ꢚꢊꢈ
ꢚꢊꢈꢉ)ꢝꢉꢜꢉ"#ꢝ)')#*ꢉ$ ' &')*+ꢉꢝ,ꢝ' 7ꢉ%')3)H)*+ꢉ'- ꢉꢝ)+*ꢜ3ꢝꢉ
(!#7ꢉꢚꢊꢈꢉꢝꢜ' 33)' ꢝꢉ$ "3#, $ꢉ:,ꢉ'- ꢉꢂꢏꢈꢏꢉꢌ "ꢜ!'7 *'ꢉ#(ꢉ
ꢌ ( *ꢝ ꢏꢉꢃ- ꢉꢔ#:)3 ꢉꢆꢜ9)+ꢜ')#*ꢉꢈ,ꢝ' 7ꢉ%ꢝ ꢝꢉ)*"%'ꢉ(!#7ꢉ
'-! ꢉ#!ꢉ7#! ꢉꢝꢜ' 33)' ꢝꢉꢜ*$ꢉ&ꢜ3&%3ꢜ' ꢝꢉ'- ꢉ9 -)&3 ꢉ"#ꢝ)')#*ꢉ
:ꢜꢝ $ꢉ#*ꢉ'- ꢉ"!)*&)"3 ꢉ#(ꢉ'!)ꢜ*+%3ꢜ')#*ꢏꢉ
ꢕ ꢆꢃꢅꢋꢊ ꢈꢂꢈꢊꢁꢈꢁꢚꢅꢉꢍꢍꢛꢄꢉꢍꢜꢅꢊꢝꢅꢂꢆꢃꢅ ꢜ ꢂꢃ ꢅꢍꢊꢄꢄꢃ ꢋꢊꢁꢇ ꢅꢂꢊꢅꢂꢆꢃꢅ
ꢃꢄꢄꢊꢄꢅꢇꢈ ꢋꢌꢉꢜꢅꢊꢝꢅꢂꢆꢃꢅꢔ ꢘ ꢖ ꢅ!ꢆꢈꢍꢆꢅꢈ ꢅꢝꢄꢊ ꢅꢉ"ꢊꢛꢂꢅ#$ꢅꢂꢊꢅ%$$ꢅ ꢃꢂꢃꢄ ꢏ
●'ꢓꢊꢔꢅꢍꢊꢉꢆꢃꢊꢍꢄꢇꢋꢖꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢓꢅꢆꢊꢌꢎꢃꢊꢓꢇꢆꢄꢌꢊꢌꢇꢕꢃ>ꢊꢅꢆꢊꢇꢓꢊꢔꢅꢍꢊꢎꢉꢛꢃꢊꢋꢅꢌꢊꢍꢄꢃꢐꢊꢇꢌꢊꢓꢅꢆꢊꢄꢅꢕꢃꢊꢌꢇꢕꢃ>ꢊꢇꢌꢊꢌꢉ4ꢃꢄꢊ
ꢉ2ꢅꢍꢌꢊ ꢊꢕꢇꢋꢍꢌꢃꢄꢊ.ꢅꢆꢊꢉ2ꢅꢍꢌꢊꢀꢊꢕꢇꢋꢍꢌꢃꢄꢊꢇꢋꢊꢅꢙꢃꢋꢊꢉꢆꢃꢉꢄ/ꢊꢌꢅꢊꢂꢉꢈꢂꢍꢈꢉꢌꢃꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃRꢄꢊꢙꢅꢄꢇꢌꢇꢅꢋꢘ
■ ꢚꢊꢈꢉꢝ)+*ꢜ3ꢉ! & "')#*ꢉ)ꢝꢉ"##!ꢉ)*ꢉ'- ꢉ(#33#8)*+ꢉ"3ꢜ& ꢝ
'ꢋꢊꢌꢍꢋꢋꢃꢈꢄ
ꢛꢝꢖꢉꢊꢄꢁꢂꢊꢁ/ꢑꢂꢃꢋꢄꢍꢏꢂꢇꢅꢂꢉꢊꢃ 5ꢋꢐꢃꢆꢊꢃꢈꢃꢛꢉꢌꢃꢐꢊꢆꢅꢉꢐꢄ
'ꢋꢊꢗꢅꢅꢐꢃꢐꢊꢉꢆꢃꢉꢄ
●9ꢎꢃꢊ7 &ꢊꢄꢉꢌꢃꢈꢈꢇꢌꢃꢄꢊꢉꢆꢃꢊꢂꢅꢋꢌꢆꢅꢈꢈꢃꢐꢊ2ꢔꢊꢌꢎꢃꢊ5ꢘ&ꢘꢊꢒꢃꢓꢃꢋꢄꢃꢊꢒꢃꢙꢉꢆꢌꢕꢃꢋꢌ>ꢊꢗꢎꢇꢂꢎꢊꢕꢉꢔꢊꢇꢋꢌꢃꢋꢌꢇꢅꢋꢉꢈꢈꢔꢊ
ꢈꢅꢗꢃꢆꢊꢙꢅꢄꢇꢌꢇꢅꢋꢇꢋꢖꢊꢉꢂꢂꢍꢆꢉꢂꢔꢘꢊ'ꢋꢊꢄꢍꢂꢎꢊꢂꢉꢄꢃꢄ>ꢊꢌꢎꢃꢆꢃꢊꢕꢉꢔꢊ2ꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢐꢃꢛꢇꢉꢌꢇꢅꢋꢄꢘ
●9ꢎꢃꢆꢃꢊꢕꢉꢔꢊ2ꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢐꢃꢛꢇꢉꢌꢇꢅꢋꢄꢊꢓꢅꢆꢊꢄꢅꢕꢃꢊꢌꢇꢕꢃꢊꢍꢋꢌꢇꢈꢊ7 &ꢊꢄꢇꢖꢋꢉꢈꢄꢊꢉꢆꢃꢊꢆꢃꢂꢃꢇꢛꢃꢐꢊꢉꢓꢌꢃꢆꢊ
ꢌꢍꢆꢋꢇꢋꢖꢊꢅꢋꢊꢌꢎꢃꢊꢇꢖꢋꢇꢌꢇꢅꢋꢘ
ꢔꢜ"ꢉꢔꢜ'&-)*+
ꢃ-)ꢝꢉ(%*&')#*ꢉ"ꢜ! ꢝꢉ,#%!ꢉ9 -)&3 Rꢝꢉ'!ꢜ&5)*+ꢉ$ꢜ'ꢜꢉ8)'-ꢉ'- ꢉ!#ꢜ$ꢉ$ꢜ'ꢜꢉ#*ꢉ'- ꢉ7ꢜ"ꢉ
$)ꢝ&;ꢉꢜ""3) ꢝꢉ$ ꢜ$ꢉ! &5#*)*+ꢉ'#ꢉ$ ' !7)* ꢉ'- ꢉ!#ꢜ$ꢉ,#%ꢉꢜ! ꢉ$!)9)*+ꢉ#*;ꢉꢜ*$ꢉ$)ꢝ"3ꢜ,ꢝꢉ
,#%!ꢉ9 -)&3 ꢉ#*ꢉ'-ꢜ'ꢉ!#ꢜ$ꢉ#*ꢉ'- ꢉ7ꢜ"ꢏ
●'ꢋꢌꢃꢈꢈꢇꢖꢃꢋꢌꢊꢕꢉꢙꢊꢕꢉꢌꢂꢎꢇꢋꢖꢊꢉꢐꢐꢆꢃꢄꢄꢃꢄꢊꢌꢎꢃꢊꢓꢅꢈꢈꢅꢗꢇꢋꢖꢊꢙꢆꢅ2ꢈꢃꢕꢄꢊꢌꢅꢊꢉꢂꢎꢇꢃꢛꢃꢊꢎꢇꢖꢎꢊꢉꢂꢂꢍꢆꢉꢂꢔꢊꢇꢋꢊ
ꢛꢃꢎꢇꢂꢈꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢇꢋꢖꢘ
ꢊ#ꢝ)')#*ꢉꢀ#!! &')#*ꢉ(#!ꢉꢎ3 9ꢜ' $ꢉꢋ#ꢜ$ꢝ
ꢅꢄꢇꢌꢇꢅꢋꢊꢉꢂꢂꢍꢆꢉꢂꢔꢊꢇꢄꢊꢇꢕꢙꢆꢅꢛꢃꢐꢊ2ꢔꢊꢐꢃꢌꢃꢂꢌꢇꢋꢖꢊꢇꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢄꢊ
ꢆꢍꢋꢋꢇꢋꢖꢊꢅꢋꢊꢅꢆꢊꢍꢋꢐꢃꢆꢊꢉꢋꢊꢃꢈꢃꢛꢉꢌꢃꢐꢊꢆꢅꢉꢐꢘ
ꢊ#ꢝ)')#*ꢉꢀ#!! &')#*ꢉ(#!ꢉꢊꢜ!5)*+ꢉꢚꢜ!ꢜ+ ꢝ
ꢅꢄꢇꢌꢇꢅꢋꢊꢉꢂꢂꢍꢆꢉꢂꢔꢊꢇꢄꢊꢇꢕꢙꢆꢅꢛꢃꢐꢊ2ꢔꢊꢐꢃꢌꢃꢂꢌꢇꢋꢖꢊꢇꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢄꢊ
ꢐꢆꢇꢛꢇꢋꢖꢊꢇꢋꢊꢉꢋꢊꢃꢈꢃꢛꢉꢌꢃꢐꢊꢅꢆꢊꢍꢋꢐꢃꢆꢖꢆꢅꢍꢋꢐꢊꢙꢉꢆ4ꢇꢋꢖꢊꢖꢉꢆꢉꢖꢃꢘ
)+-G"! &)ꢝ)#*ꢉꢚ,!#ꢝ *ꢝ#!
ꢁꢊꢖꢔꢆꢅꢊꢐꢃꢌꢃꢂꢌꢄꢊꢌꢍꢆꢋꢄꢊꢗꢇꢌꢎꢊꢉꢋꢊꢉꢂꢂꢍꢆꢉꢂꢔꢊꢅꢓꢊ!ꢘ! ꢞꢊꢙꢃꢆꢊꢄꢃꢂꢅꢋꢐꢘꢊ
%ꢅꢕ2ꢇꢋꢃꢐꢊꢗꢇꢌꢎꢊꢉꢊꢄꢙꢃꢃꢐꢊꢄꢃꢋꢄꢅꢆ>ꢊꢇꢌꢊꢃꢋꢉ2ꢈꢃꢄꢊꢌꢎꢃꢊꢄꢔꢄꢌꢃꢕꢊꢌꢅꢊ
ꢐꢇꢄꢙꢈꢉꢔꢊꢌꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊꢛꢃꢎꢇꢂꢈꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢃꢛꢃꢋꢊꢗꢎꢃꢆꢃꢊ7 &ꢊꢄꢇꢖꢋꢉꢈꢄꢊ
ꢕꢉꢔꢊ2ꢃꢊ2ꢈꢅꢂ4ꢃꢐꢘ
●5ꢄꢇꢋꢖꢊꢉꢊꢄꢙꢉꢆꢃꢊꢌꢇꢆꢃꢊꢇꢋꢊꢙꢈꢉꢂꢃꢊꢅꢓꢊꢌꢎꢃꢊꢆꢃꢖꢍꢈꢉꢆꢊꢅꢋꢃꢊꢕꢉꢔꢊꢂꢉꢍꢄꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢐꢃꢛꢇꢉꢌꢇꢅꢋꢄꢘ
●ꢁꢋꢔꢊꢐꢇꢓꢓꢃꢆꢃꢋꢂꢃꢊ2ꢃꢌꢗꢃꢃꢋꢊꢌꢎꢃꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢊꢗꢎꢇꢂꢎꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃꢊꢉꢂꢌꢍꢉꢈꢈꢔꢊꢌꢆꢉꢛꢃꢈꢄꢊꢉꢋꢐꢊꢌꢎꢉꢌꢊꢄꢎꢅꢗꢋꢊꢅꢋꢊ
ꢌꢎꢃꢊꢕꢉꢙꢊꢇꢄꢊꢉꢍꢌꢅꢕꢉꢌꢇꢂꢉꢈꢈꢔꢊꢃꢈꢇꢕꢇꢋꢉꢌꢃꢐꢊ2ꢔꢊꢉꢏꢇꢕꢍꢌꢎꢊꢂꢅꢆꢆꢃꢂꢌꢇꢅꢋꢘ
(C
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 48 Friday, July 29, 2005 9:28 AM
ꢀꢁꢂꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢉꢆꢂꢍꢎꢀꢂꢁꢏ ꢁꢍꢄꢈꢃꢂ
ꢊ#ꢝ)')#*)*+ꢉꢁ&&%!ꢜ&,
ꢄ*ꢉ'- ꢉ(#33#8)*+ꢉꢝ)'%ꢜ')#*ꢝ;ꢉ,#%!ꢉ9 -)&3 ꢉ"#ꢝ)')#*ꢉ7ꢜ,ꢉ*#'ꢉ: ꢉ$)ꢝ"3ꢜ, $ꢉ&#!! &'3,ꢉ#*ꢉ'- ꢉ
7ꢜ"ꢏꢉꢒ%';ꢉꢜꢝꢉ,#%ꢉ5 "ꢉ$!)9)*+;ꢉ,#%!ꢉ9 -)&3 ꢉ"#ꢝ)')#*ꢉ8)33ꢉ: ꢉꢜ%'#7ꢜ')&ꢜ33,ꢉ&#!! &' $ꢉ
%')3)H)*+ꢉ7ꢜ"ꢉ7ꢜ'&-)*+ꢉꢜ*$ꢉꢚꢊꢈꢉ$ꢜ'ꢜꢏ
8ꢍꢋꢋꢇꢋꢖꢊꢅꢋꢊꢉꢋꢊ
ꢃꢈꢃꢛꢉꢌꢃꢐꢊꢆꢅꢉꢐ
ꢑꢉ4ꢇꢋꢖꢊꢉꢊꢌꢍꢆꢋꢊꢉꢓꢌꢃꢆꢊ 8ꢍꢋꢋꢇꢋꢖꢊꢅꢋꢊꢉꢊꢄꢌꢃꢃꢙꢊ 8ꢍꢋꢋꢇꢋꢖꢊꢅꢋꢊꢉꢊꢄꢙꢇꢆꢉꢈꢊ #ꢌꢃꢄ ꢋꢌꢎꢅꢇꢌꢅꢋꢌꢃꢄ ꢆꢄꢈꢃꢋꢁꢌꢅ
ꢐꢆꢇꢛꢇꢋꢖꢊꢅꢋꢊꢉꢊꢈꢅꢋꢖꢊ
ꢄꢌꢆꢉꢇꢖꢎꢌꢊꢆꢅꢉꢐ
ꢕꢅꢍꢋꢌꢉꢇꢋꢊꢆꢅꢉꢐ
ꢆꢅꢉꢐ
ꢊꢉꢄ ꢄꢅꢇꢅ ꢁꢇꢒꢅꢔ ꢇꢌꢈꢉꢄꢆꢅ
ꢁꢕꢕꢅꢇꢃꢅꢇꢅꢆꢐꢇꢑꢑꢅꢇꢌꢎꢑꢄ
CAR FERRY
STOP
O
T
P
8ꢍꢋꢋꢇꢋꢖꢊꢅꢋꢊꢖꢆꢇꢐꢇꢆꢅꢋꢊ 8ꢍꢋꢋꢇꢋꢖꢊꢅꢋꢊꢉꢊ
ꢈꢉꢔꢅꢍꢌꢊꢅꢓꢊꢆꢅꢉꢐꢄ ꢄꢈꢇꢙꢙꢃꢆꢔꢊꢆꢅꢉꢐꢊꢗꢇꢌꢎꢊ ꢆꢅꢉꢐꢊ
ꢌꢇꢆꢃꢊꢂꢎꢉꢇꢋꢄ
&ꢋꢉ4ꢇꢋꢖꢊꢅꢋꢊꢉꢊꢗꢇꢐꢃꢊ ꢚꢎꢃꢋꢊꢔꢅꢍꢆꢊꢛꢃꢎꢇꢂꢈꢃꢊ ꢁꢓꢌꢃꢆꢊꢖꢃꢌꢌꢇꢋꢖꢊꢅꢓꢓꢊꢉꢊ
ꢇꢄꢊꢅꢋꢊꢉꢊꢌꢍꢆꢋꢌꢉ2ꢈꢃꢊ
ꢗꢇꢌꢎꢊꢌꢎꢃꢊꢇꢖꢋꢇꢌꢇꢅꢋꢊ
ꢌꢍꢆꢋꢃꢐꢊꢅꢓꢓ
ꢓꢃꢆꢆꢔ2ꢅꢉꢌꢊꢅꢆꢊꢛꢃꢎꢇꢂꢈꢃꢊ
ꢌꢆꢉꢇꢋ
ꢋ#%' ꢉꢚ%)$
ꢁ3'-#%+-ꢉ,#%ꢉ7ꢜ,ꢉ *&#%*' !ꢉ'- ꢉ(#33#8)*+ꢉ"!#:3 7ꢝꢉ)*ꢉ!#%' ꢉ+%)$ ;ꢉ'- ! ꢉ)ꢝꢉ*#'-)*+ꢉ
8!#*+ꢉ8)'-ꢉ'- ꢉꢝ,ꢝ' 7ꢏ
In 300 m
right turn
Left turn
ahead
)ꢅꢆꢊꢂꢃꢆꢌꢉꢇꢋꢊꢇꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋꢊꢄꢎꢉꢙꢃꢄ>ꢊ )ꢅꢆꢊꢂꢃꢆꢌꢉꢇꢋꢊꢇꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋꢊꢄꢎꢉꢙꢃꢄ>ꢊ 6ꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢓꢅꢆꢊꢌꢎꢃꢊꢙꢈꢉꢋꢋꢃꢐꢊ
ꢌꢎꢃꢊꢍꢙꢂꢅꢕꢇꢋꢖꢊꢌꢍꢆꢋꢊꢅꢆꢊꢌꢎꢃꢊꢋꢉꢕꢃꢊꢅꢓꢊ ꢔꢅꢍꢊꢕꢉꢔꢊ2ꢃꢊꢙꢆꢅꢕꢙꢌꢃꢐꢊꢌꢅꢊꢌꢍꢆꢋꢊꢆꢇꢖꢎꢌꢊ ꢆꢅꢍꢌꢃꢊꢕꢉꢔꢊꢂꢅꢋꢌꢇꢋꢍꢃꢊꢃꢛꢃꢋꢊꢉꢓꢌꢃꢆꢊꢔꢅꢍꢊ
ꢌꢎꢃꢊꢇꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋꢊꢕꢉꢔꢊꢋꢅꢌꢊ2ꢃꢊ
ꢉꢋꢋꢅꢍꢋꢂꢃꢐꢘ
ꢅꢆꢊꢈꢃꢓꢌꢊꢚꢎꢃꢋꢊꢔꢅꢍꢊꢄꢎꢅꢍꢈꢐꢊꢉꢂꢌꢍꢉꢈꢈꢔꢊ ꢎꢉꢛꢃꢊꢐꢃꢛꢇꢉꢌꢃꢐꢊꢓꢆꢅꢕꢊꢌꢎꢉꢌꢊꢆꢅꢍꢌꢃꢊ
ꢄꢌꢉꢔꢊꢅꢋꢊꢌꢎꢃꢊꢄꢉꢕꢃꢊꢆꢅꢉꢐꢘ
ꢄꢍꢂꢎꢊꢉꢄꢊꢎꢉꢛꢇꢋꢖꢊꢌꢍꢆꢋꢃꢐꢊꢌꢅꢅꢊꢃꢉꢆꢈꢔꢘ
300m
In 300 m
right turn
0m
&ꢅꢕꢃꢊꢙꢅꢇꢋꢌꢄꢊꢗꢎꢃꢆꢃꢊꢌꢎꢃꢊꢆꢅꢉꢐꢊ 9ꢎꢃꢊ'ꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋꢊLꢅꢅꢕꢊꢑꢉꢙꢊꢕꢉꢔꢊ 9ꢎꢃꢊꢉꢋꢋꢅꢍꢋꢂꢃꢐꢊꢐꢇꢄꢌꢉꢋꢂꢃꢊꢌꢅꢊꢉꢋꢊ
ꢐꢇꢛꢇꢐꢃꢄꢊꢅꢋꢊꢎꢇꢖꢎꢗꢉꢔꢄꢊꢅꢆꢊꢌꢅꢈꢈꢊꢆꢅꢉꢐꢄꢊ ꢋꢅꢌꢊꢉꢈꢗꢉꢔꢄꢊꢉꢖꢆꢃꢃꢊꢗꢇꢌꢎꢊꢌꢎꢃꢊꢉꢂꢌꢍꢉꢈꢊ ꢍꢙꢂꢅꢕꢇꢋꢖꢊꢌꢍꢆꢋꢊꢕꢉꢔꢊꢐꢇꢓꢓꢃꢆꢊꢄꢈꢇꢖꢎꢌꢈꢔꢊ
ꢕꢉꢔꢊꢋꢅꢌꢊ2ꢃꢊꢐꢇꢄꢙꢈꢉꢔꢃꢐꢊꢅꢆꢊ
ꢉꢋꢋꢅꢍꢋꢂꢃꢐꢘ
ꢄꢎꢉꢙꢃꢊꢅꢓꢊꢌꢎꢃꢊꢇꢋꢌꢃꢆꢄꢃꢂꢌꢇꢅꢋꢘ
ꢓꢆꢅꢕꢊꢆꢃꢉꢈꢇꢌꢔꢘ
(*
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 49 Friday, July 29, 2005 9:28 AM
9ꢎꢃꢊꢋꢉꢛꢇꢖꢉꢌꢇꢅꢋꢊꢄꢔꢄꢌꢃꢕꢊꢇꢄꢊ<ꢍꢄꢌꢊꢉꢊꢄꢍꢙꢙꢅꢆꢌꢊꢄꢔꢄꢌꢃꢕꢊꢓꢅꢆꢊꢌꢎꢃꢊꢐꢆꢇꢛꢃꢆꢘꢊ9ꢎꢃꢊꢐꢆꢇꢛꢃꢆꢊꢄꢎꢅꢍꢈꢐꢊꢉꢈꢗꢉꢔꢄꢊꢙꢉꢔꢊ
ꢉꢌꢌꢃꢋꢌꢇꢅꢋꢊꢌꢅꢊꢌꢎꢃꢊꢌꢆꢉꢓꢓꢇꢂꢊꢄꢇꢌꢍꢉꢌꢇꢅꢋꢊꢌꢅꢊꢄꢉꢓꢃꢈꢔꢊꢕꢉ4ꢃꢊꢐꢃꢂꢇꢄꢇꢅꢋꢄꢘꢊ=ꢅꢍꢊꢕꢉꢔꢊ2ꢃꢊꢍꢋꢉ2ꢈꢃꢊꢌꢅꢊꢉꢆꢆꢇꢛꢃꢊꢉꢌꢊꢔꢅꢍꢆꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢐꢍꢃꢊꢌꢅꢊꢅꢍꢌ?ꢅꢓ?ꢐꢉꢌꢃꢊꢇꢋꢓꢅꢆꢕꢉꢌꢇꢅꢋꢊꢅꢋꢊꢉꢊꢕꢉꢙꢊꢐꢇꢄꢂꢘꢊ=ꢅꢍꢊꢄꢎꢅꢍꢈꢐꢊ2ꢃꢊꢃꢄꢙꢃꢂꢇꢉꢈꢈꢔꢊꢂꢉꢆꢃꢓꢍꢈꢊ
ꢀꢁꢂꢃꢄꢃꢅ
ꢗꢎꢃꢋꢊꢄꢃꢈꢃꢂꢌꢇꢋꢖꢊꢉꢋꢊꢍꢆꢖꢃꢋꢌꢊꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢊꢄꢍꢂꢎꢊꢉꢄꢊꢉꢊꢎꢅꢄꢙꢇꢌꢉꢈꢊꢅꢆꢊꢉꢊꢙꢅꢈꢇꢂꢃꢊꢄꢌꢉꢌꢇꢅꢋꢘ
ꢋ#%' ꢉꢈ ꢜ!&-
ꢁ3'-#%+-ꢉ,#%ꢉ7ꢜ,ꢉ *&#%*' !ꢉ'- ꢉ(#33#8)*+ꢉ"!#:3 7ꢝꢉ)*ꢉꢜꢉ!#%' ꢉꢝ ꢜ!&-;ꢉ'- ! ꢉ)ꢝꢉ*#'-)*+ꢉ
8!#*+ꢉ8)'-ꢉ'- ꢉꢝ,ꢝ' 7ꢏ
The guide map may
It may also show roads
show roads that are not
that are out of use due
passable due to closure
to the opening of a new
in winter or for other
road or for other
reasons.
It may also show
roads that only permit
one-way traffic.
reasons.
Road
out of
use
Destination
?
?
?
which
exit?
Depending upon the shape of
roundabout (rotary), the guide
map may show a wrong exit.
?
• There may be cases
where the route remains
unchanged after another
search.
• A congested route may
be shown.
Destination
?
?
?
Destination
It may show a
common road under
or over an elevated
road.
The route shown only
reaches a point near
your destination if your
destination has no
direct access road or
the road is too narrow.
It may show a route
where you'll have to
make a U-turn.
?
Destination
(E
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 50 Friday, July 29, 2005 9:28 AM
ꢖꢂꢃꢇꢛꢇꢋꢓꢆꢇꢑ ꢄꢜꢇꢃꢁꢆ
9ꢆꢅꢍ2ꢈꢃꢄꢎꢅꢅꢌꢇꢋꢖ
Note
9ꢎꢃꢆꢃꢊꢕꢉꢔꢊ2ꢃꢊꢄꢅꢕꢃꢊꢙꢆꢅ2ꢈꢃꢕꢄꢊꢐꢍꢃꢊꢌꢅꢊꢅꢙꢃꢆꢉꢌꢇꢅꢋꢉꢈꢊꢃꢆꢆꢅꢆꢄꢊꢅꢆꢊꢕꢇꢄꢌꢉ4ꢃꢄꢘꢊ ꢈꢃꢉꢄꢃꢊꢆꢃꢉꢐꢊꢌꢎꢇꢄꢊꢕꢉꢋꢍꢉꢈꢊ
ꢉꢖꢉꢇꢋꢊꢉꢋꢐꢊꢛꢃꢆꢇꢓꢔꢊꢌꢎꢉꢌꢊꢌꢎꢃꢆꢃꢊꢆꢃꢉꢈꢈꢔꢊꢇꢄꢊꢉꢊꢙꢆꢅ2ꢈꢃꢕꢊ2ꢃꢓꢅꢆꢃꢊꢂꢉꢈꢈꢇꢋꢖꢊꢉꢋꢊ0;ꢙꢃꢆꢌꢊꢆꢃꢙꢉꢇꢆꢃꢆ>ꢊꢗꢃꢊ
ꢆꢃꢂꢅꢕꢕꢃꢋꢐꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊꢑꢉꢏꢐꢉꢊ8ꢃꢙꢉꢇꢆꢃꢆꢊꢌꢅꢊꢉꢄ4ꢊꢓꢅꢆꢊꢆꢃꢙꢉꢇꢆꢊꢄꢃꢆꢛꢇꢂꢃꢄꢘ
&ꢔꢕꢙꢌꢅꢕ
%ꢎꢃꢂ4ꢊꢙꢅꢇꢋꢌ
ꢆ#ꢉ")&'%!
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢉꢊꢓꢍꢄꢃꢊꢎꢉꢄꢊ2ꢃꢃꢋꢊ2ꢈꢅꢗꢋꢘ
%ꢅꢋꢄꢍꢈꢌꢊꢉꢋꢊ0;ꢙꢃꢆꢌꢊꢆꢃꢙꢉꢇꢆꢃꢆ>ꢊꢗꢃꢊꢆꢃꢂꢅꢕꢕꢃꢋꢐꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊ
ꢑꢉꢏꢐꢉꢊ8ꢃꢙꢉꢇꢆꢃꢆꢘ
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊꢛꢅꢈꢌꢉꢖꢃꢊꢈꢃꢛꢃꢈꢊꢅꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊ2ꢉꢌꢌꢃꢆꢔꢊꢇꢄꢊꢈꢅꢗꢘ
8ꢃꢂꢎꢉꢆꢖꢃꢊꢌꢎꢃꢊ2ꢉꢌꢌꢃꢆꢔꢊꢅꢆꢊꢂꢎꢉꢋꢖꢃꢊ2ꢉꢌꢌꢃꢆꢇꢃꢄꢘ
ꢌ)ꢝ"3ꢜ,ꢉ$# ꢝ*R'ꢉ
#" *ꢉ#!ꢉ&3#ꢝ
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢂꢎꢉꢋꢖꢃꢐꢊꢗꢎꢃꢋꢊꢁ%%ꢊꢗꢉꢄꢊꢄꢃꢌꢊꢌꢅꢊ
,))ꢘ
ꢚꢎꢃꢋ>ꢊꢓꢅꢆꢊꢃ;ꢉꢕꢙꢈꢃ>ꢊ
ꢃ- ꢉ9 -)&3 ꢉ
"#ꢝ)')#*ꢉ)ꢝꢉ*#'ꢉ
&#!! &'
# 9ꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢗꢉꢄꢊꢌꢆꢉꢋꢄꢙꢅꢆꢌꢃꢐꢊ2ꢔꢊꢉꢊꢓꢃꢆꢆꢔꢊ2ꢅꢉꢌꢘ
# 9ꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢗꢉꢄꢊꢆꢅꢌꢉꢌꢃꢐꢊꢅꢋꢊꢉꢊꢌꢍꢆꢋꢊꢌꢉ2ꢈꢃꢊꢇꢋꢊꢉꢊꢙꢉꢆ4ꢇꢋꢖꢊꢈꢅꢌꢘ
# 9ꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢗꢉꢄꢊꢌꢆꢉꢋꢄꢙꢅꢆꢌꢃꢐꢊ2ꢔꢊꢉꢊꢌꢅꢗꢊꢌꢆꢉꢂ4ꢊꢅꢆꢊꢅꢌꢎꢃꢆꢊꢄꢍꢂꢎꢊ
ꢛꢃꢎꢇꢂꢈꢃꢘ
ꢒꢆꢇꢛꢃꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢓꢅꢆꢊꢉꢊꢗꢎꢇꢈꢃꢊꢗꢎꢃꢆꢃꢊꢔꢅꢍꢊꢉꢆꢃꢊꢆꢃꢂꢃꢇꢛꢇꢋꢖꢊ
7 &ꢊꢄꢇꢖꢋꢉꢈꢄꢘ
!
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 51 Friday, July 29, 2005 9:28 AM
&ꢔꢕꢙꢌꢅꢕ
%ꢎꢃꢂ4ꢊꢙꢅꢇꢋꢌ
ꢆ#ꢉꢚꢊꢈꢉ
ꢝ,7:#3ꢝꢉꢜ! ꢉ
$)ꢝ"3ꢜ, $
●7 &ꢊꢄꢇꢖꢋꢉꢈꢄꢊꢕꢉꢔꢊꢋꢅꢌꢊ2ꢃꢊꢆꢃꢂꢃꢇꢛꢃꢐꢊ2ꢃꢂꢉꢍꢄꢃꢊꢅꢓꢊꢅ2ꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄꢘꢊ
ꢁꢓꢌꢃꢆꢊꢕꢅꢛꢇꢋꢖꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢉꢗꢉꢔꢊꢓꢆꢅꢕꢊꢅ2ꢄꢌꢆꢍꢂꢌꢇꢅꢋꢄ>ꢊꢌꢎꢃꢊ7 &ꢊ
ꢄꢇꢖꢋꢉꢈꢄꢊꢂꢉꢋꢊ2ꢃꢊꢆꢃꢂꢃꢇꢛꢃꢐꢘ
ꢃ- ꢉ9 -)&3 ꢉ
"#ꢝ)')#*ꢉ)ꢝꢉ*#'ꢉ
$)ꢝ"3ꢜ, $
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊꢕꢅꢐꢃꢊꢇꢄꢊꢄꢃꢌꢊꢌꢅꢊꢌꢎꢃꢊꢂꢍꢆꢆꢃꢋꢌꢊꢙꢅꢄꢇꢌꢇꢅꢋꢊꢄꢂꢆꢃꢃꢋꢘ
ꢆꢃꢄꢄꢊ
POS
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊꢛꢅꢈꢍꢕꢃꢊꢂꢅꢋꢌꢆꢅꢈꢊꢓꢅꢆꢊꢌꢎꢃꢊꢛꢅꢇꢂꢃꢊꢖꢍꢇꢐꢉꢋꢂꢃꢊꢎꢉꢄꢊ2ꢃꢃꢋꢊ
ꢌꢍꢆꢋꢃꢐꢊꢅꢓꢓꢘ
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢄꢊꢅꢓꢓꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢘ
8ꢃꢙꢃꢉꢌꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢄꢃꢉꢆꢂꢎꢊꢗꢎꢇꢈꢃꢊꢂꢎꢃꢂ4ꢇꢋꢖꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢖꢍꢇꢐꢃꢊ
ꢄꢂꢆꢃꢃꢋꢘ
●%ꢎꢃꢂ4ꢊꢇꢓꢊꢔꢅꢍꢊꢉꢆꢃꢊꢐꢆꢇꢛꢇꢋꢖꢊꢌꢎꢃꢊꢛꢃꢎꢇꢂꢈꢃꢊꢇꢋꢊꢌꢎꢃꢊꢗꢆꢅꢋꢖꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢊꢅꢋꢊ
ꢌꢎꢃꢊꢆꢅꢍꢌꢃꢘ
ꢆ#ꢉ9#)& ꢉ
+%)$ꢜ*&
8ꢃꢙꢃꢉꢌꢊꢌꢎꢃꢊꢆꢅꢍꢌꢃꢊꢄꢃꢉꢆꢂꢎꢊꢂꢎꢃꢂ4ꢇꢋꢖꢊꢌꢎꢃꢊꢐꢇꢆꢃꢂꢌꢇꢅꢋꢊꢅꢓꢊꢌꢎꢃꢊ
ꢐꢃꢄꢌꢇꢋꢉꢌꢇꢅꢋꢘ
ꢒ%''#*ꢝꢉ)*ꢉ'- ꢉ
! 7#' ꢉ&#*'!#3ꢉ
$#ꢉ*#'ꢉ: "
●%ꢎꢃꢂ4ꢊꢇꢓꢊH3ꢃꢃꢙIꢊꢇꢄꢊꢄꢃꢌꢊꢌꢅꢊH,ꢓꢓIꢊ.ꢊ
ꢊꢙꢉꢖꢃꢊ(!/ꢘ
+
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 52 Friday, July 29, 2005 9:28 AM
ꢝꢃꢃꢑꢃꢄ ꢂꢁꢁꢓꢈꢂꢁ
9ꢆꢅꢍ2ꢈꢃꢄꢎꢅꢅꢌꢇꢋꢖ
0ꢆꢆꢅꢆꢊꢕꢃꢄꢄꢉꢖꢃ
&ꢅꢈꢍꢌꢇꢅꢋ
●ꢀꢁꢂꢃꢄꢅꢆꢇꢃꢅꢆꢃ ꢈꢉꢃꢅ ꢆꢉꢊꢋꢋꢂꢄꢌ
ꢊ3 ꢜꢝ ꢉ)*ꢝ !'ꢉꢜꢉ
ꢔꢁꢊꢉꢌꢑꢌꢏ
%ꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊꢐꢇꢄ4ꢊꢇꢄꢊꢇꢋꢄꢌꢉꢈꢈꢃꢐꢘꢊ'ꢓꢊꢇꢋꢄꢌꢉꢈꢈꢃꢐ>ꢊꢂꢎꢃꢂ4ꢊꢇꢓꢊꢌꢎꢃꢊ
ꢇꢋꢄꢌꢉꢈꢈꢃꢐꢊꢐꢇꢄ4ꢊꢇꢄꢊꢂꢅꢆꢆꢃꢂꢌꢘ
ꢔꢁꢊꢉꢌꢑꢌGꢋ ꢜ$ꢉ
ꢎ!!#!
●ꢀꢁꢂꢃꢄꢅꢆꢇꢃꢅꢆꢃ ꢂꢈꢉꢃꢄꢅꢊꢈꢋꢉꢃꢆꢇꢊꢌꢈꢇꢁꢂꢄꢉꢃꢍꢊꢃꢎꢏꢆꢅꢄꢂꢃꢄꢍ ꢐꢉꢃꢍꢊꢃꢈꢁꢂꢃꢄꢅꢆꢇꢃ
ꢇꢌꢐꢐꢍꢈꢃꢑꢂꢃꢏꢒꢌꢋꢂꢄꢃ ꢅꢈꢁꢃꢈꢁꢅꢆꢃꢎꢐꢅꢈꢃꢍꢊꢃꢈꢁꢂꢃꢅꢐꢇꢍꢊꢊꢂꢇꢈꢃꢄꢅꢆꢓꢃꢅꢆꢃꢅꢐꢆꢈꢌꢒꢒꢂꢄꢔ
0<ꢃꢂꢌꢊꢌꢎꢃꢊꢐꢇꢄꢂꢊꢉꢋꢐꢊꢂꢎꢃꢂ4ꢊꢇꢌꢘ
ꢃ- ꢉ$)ꢝ&ꢉ
)*ꢝ'ꢜ33 $ꢉ)ꢝꢉ*#'ꢉ
ꢜꢉꢔꢁꢊꢉꢌꢑꢌꢏ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 53 Friday, July 29, 2005 9:28 AM
ꢑꢉꢇꢋꢌꢃꢋꢉꢋꢂꢃ
ꢀꢜ! ꢉ#(ꢉ'- ꢉꢊ!#$%&'
■ ꢀ3 ꢜ*)*+ꢉ'-)ꢝꢉ"!#$%&'
5ꢄꢃꢊꢉꢊꢐꢆꢔ>ꢊꢄꢅꢓꢌꢊꢂꢈꢅꢌꢎꢊꢌꢅꢊꢗꢇꢙꢃꢊꢇꢌꢘ
■ ꢀꢜ%')#*ꢝꢉ(#!ꢉ&3 ꢜ*)*+
#ꢃꢛꢃꢆꢊꢍꢄꢃꢊꢄꢅꢈꢛꢃꢋꢌꢄꢊꢄꢍꢂꢎꢊꢉꢄꢊ2ꢃꢋꢏꢃꢋꢃꢊꢉꢋꢐꢊꢌꢎꢇꢋꢋꢃꢆꢄ>ꢊꢌꢎꢃꢔꢊꢂꢅꢍꢈꢐꢊꢕꢉꢆꢊꢌꢎꢃꢊꢄꢍꢆꢓꢉꢂꢃꢊꢅꢓꢊꢌꢎꢃꢊꢍꢋꢇꢌꢘ
■ ꢔꢜ"ꢉ$)ꢝ&
'ꢓꢊꢔꢅꢍꢊꢆꢃDꢍꢇꢆꢃꢊꢌꢎꢃꢊꢈꢉꢌꢃꢄꢌꢊꢕꢉꢙꢊꢐꢇꢄꢂ>ꢊꢂꢅꢋꢄꢍꢈꢌꢊꢉꢋꢊ0;ꢙꢃꢆꢌꢊꢆꢃꢙꢉꢇꢆꢃꢆ>ꢊꢗꢃꢊꢆꢃꢂꢅꢕꢕꢃꢋꢐꢊꢉꢋꢊꢁꢍꢌꢎꢅꢆꢇꢏꢃꢐꢊ
ꢑꢉꢏꢐꢉꢊ8ꢃꢙꢉꢇꢆꢃꢆꢘꢊ
ꢜ*$3)*+ꢉꢜ*$ꢉꢀꢜ! ꢉ#(ꢉꢔꢜ"ꢉꢌ)ꢝ&ꢝ
■
#8ꢉ'#ꢉ-#3$ꢉ'- ꢉ$)ꢝ&
"ꢉ2ꢃꢈꢊꢄꢇꢐꢃ
●ꢒꢅꢊꢋꢅꢌꢊꢌꢅꢍꢂꢎꢊꢌꢎꢃꢊꢍꢋꢐꢃꢆꢄꢇꢐꢃꢊꢅꢓꢊꢌꢎꢃꢊꢐꢇꢄꢂꢘ
●ꢒꢅꢊꢋꢅꢌꢊꢄꢂꢆꢉꢌꢂꢎꢊꢌꢎꢃꢊꢐꢇꢄꢂꢘ
●ꢒꢅꢊꢋꢅꢌꢊ2ꢃꢋꢐꢊꢌꢎꢃꢊꢐꢇꢄꢂꢘ
●ꢚꢎꢃꢋꢊꢋꢅꢌꢊꢇꢋꢊꢍꢄꢃ>ꢊ4ꢃꢃꢙꢊꢌꢎꢃꢊꢐꢇꢄꢂꢊꢇꢋꢊꢌꢎꢃꢊꢂꢉꢄꢃꢘ
■ ꢌ)ꢝ&ꢉꢀ3 ꢜ*)*+
●5ꢄꢃꢊꢉꢊꢐꢆꢔ>ꢊꢄꢅꢓꢌꢊꢂꢈꢅꢌꢎꢊꢌꢅꢊꢗꢇꢙꢃꢊꢓꢆꢅꢕꢊꢌꢎꢃꢊꢂꢃꢋꢌꢃꢆꢊꢅꢍꢌꢗꢉꢆꢐꢘ
M8ꢇꢖꢎꢌN
MꢚꢆꢅꢋꢖN
■ ꢌ#ꢉ*#'ꢉ3 ꢜ9 ꢉ$)ꢝ&ꢝꢉ)*ꢉ'- ꢉ(#33#8)*+ꢉ"3ꢜ& ꢝꢇ
●ꢒꢇꢆꢃꢂꢌꢊꢄꢍꢋꢈꢇꢖꢎꢌ
●#ꢃꢉꢆꢊꢂꢉꢆꢊꢎꢃꢉꢌꢃꢆꢄ
●'ꢋꢊꢐꢇꢆꢌꢔ>ꢊꢐꢍꢄꢌꢔꢊꢉꢋꢐꢊꢐꢉꢕꢙꢊꢉꢆꢃꢉꢄ
●,ꢋꢊꢄꢃꢉꢌꢄꢊꢉꢋꢐꢊꢐꢉꢄꢎ2ꢅꢉꢆꢐꢄ
$
Download from Www.Somanuals.com. All Manuals Search And Download.
RX-8_NAVI_EA_Edition1.book Page 54 Friday, July 29, 2005 9:28 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|