Maytag Clothes Washer
LAT-2
USER’S GUIDE
Congratulations on
your purchase of a Maytag
clothes washer! Your satisfaction
is very important to us.
Read this manual for best results. It con-
tains instructions to acquaint you with proper
operating and maintenance procedures.
In addition you will find a Laundering Tips guide
packed with your clothes washer. It contains infor-
mation on recommended laundering procedures,
stain removal and special laundering situations.
Save time and money. If something should go
wrong, we suggest consulting the “Before You Call”
section. It is designed to help you solve basic prob-
lems before consulting a servicer.
Table of Contents
Safety Instructions. . . . . . . . . . . . . . . . 1
Operating Tips . . . . . . . . . . . . . . . . . . . 2
Controls at a Glance . . . . . . . . . . . . . 3-4
Special Features . . . . . . . . . . . . . . . . . 5
Care and Cleaning . . . . . . . . . . . . . . . . 6
Before You Call . . . . . . . . . . . . . . . . . 6-7
Warranty. . . . . . . . . . . . . . . . . . . . . . . . 8
Guide de L’Utilisateur. . . . . . . . . . . . . 10
Guía del Usuario . . . . . . . . . . . . . . . . 20
©2002 Maytag Appliances Sales Co.
If you have questions, write us (include your model
number and phone number) or call:
Maytag Appliances Sales Company
®
Attn: CAIR Center
P.O. Box 2370
Cleveland, TN 37320-2370
1-800-688-9900 USA
1-800-688-2002 CANADA
1-800-688-2080 USA TTY (for deaf, hearing
impaired or speech impaired)
(Mon.–Fri., 8am–8pm Eastern Time)
Part No. 6 2306510-0502
MCS Part No. 22003922
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating tips
For detailed information on sorting, pretreating stains, etc., see the enclosed Laundering Tips pamphlet.
Detergent
• Use either liquid or granular laundry detergent. For
best results, be sure detergent is added to the wash-
er BEFORE the load and be sure the wash water is
above 65° F.
• Use the correct amount of detergent for the load size,
soil level and water conditions. Use more detergent if
you have hard water and very soiled loads.
If you have soft water or a lightly soiled load, use less
detergent. (See manufacturer’s instructions.)
• Wipe up any detergent spills on the washer.
Loading
• Put dry, unfolded clothes loosely in the tub, up to the
top row of holes for a maximum load.
• Do not wrap large items like sheets around the agita-
tor.
• Mix large and small items for best circulation. Wash
bulky items like blankets separately.
• When laundering permanent press items or items of
delicate construction, washable woolens or loosely
knit items, never use less than the MEDIUM water
level setting. This will minimize shrinkage, wrinkling
and pulling of seams.
• For best results add the detergent to the washtub
before adding the load.
• Close lid carefully to avoid slamming.
Additional tips
• If the washer stops during the spin, it may be due to
an unevenly distributed load. If this happens, push
in the control knob, open the lid, redistribute the
load, close the lid and pull out the control knob. The
spin will resume at the point it was interrupted.
• This washer is designed so that it will not agitate or
spin when the lid is open. It will, however, fill with
the lid open so water is available for pretreating
stains or diluting fabric softener.
• If you open the lid during a cycle, the washer will
stop. When the lid is closed and the control knob
pulled out, the washer will continue the cycle at the
point it was interrupted.
• The washer will pause briefly throughout each cycle.
These pauses are normal.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls at a glance
Step 1
Select Load Size
Turn the Load Size knob to the setting that matches the
size of the load.
If more water is needed once the fill is complete, turn
the knob to reset and then to the proper setting.
WATER LEVEL SETTING
LOAD SIZE
Super
Large
3/4 – Full
1/2 – 3/4 Full
1/3 – 1/2 Full
1/4 – 1/3 Full
Medium
Small
Mini (Select Models)
1/4 Full
REMEMBER: Items must circulate freely for best results.
Step 2
Select Extra Rinse
(select models)
Provides an additional rinse near the end of the cycle to
more completely remove laundry additives, perfumes, etc.
Step 3
Select Temperature
Turn the Wash Rinse Temperature knob to the desired
water temperatures. Follow the garment care label for
best results. Use the chart at below as a guide.
WASH/RINSE TEMPS
LOAD TYPE
White and heavily soiled,
color-fast items
Hot/Cold
Warm/Warm
Delicate items
(Select Models)
Moderately soiled,
colored items;
Warm/Cold
Cold/Cold
most permanent press items
REMEMBER: In wash water temperatures below 65° F, deter-
gents do not dissolve well or clean well. Care labels define
cold water as up to 85° F.
Brightly colored, lightly soiled
items; washable woolens
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4
Select Cycle
Control features vary by model.
Permanent Press Cycle
Is designed to minimize wrinkles with a cool-down
spray rinse following the wash.
To select a cycle, push the control dial IN (off position)
and turn it to the right (clockwise) until the pointer is at
the number of minutes desired for the wash load.
Gentle Cycle
Is designed for items requiring gentle wash action.
Regular Cycle
Provides normal agitation and normal spin speeds to
wash normal, sturdy fabrics. For maximum cleaning,
set the dial at 18.
Step 5
Start Washer
NOTE: The wash/spin speeds are automatically
programmed to assure proper agitation and spin-
ning for each load type.The REGULAR cycle will
provide a normal wash/spin speed. PERMANENT
PRESS will have a normal wash/spin speed
along with a cool-down spray rinse.The GENTLE
cycle will have a gentle wash and normal final
spin speed.
• Add detergent.
• Add load and close lid.
• Pull out control knob to start.
NOTE: Do not attempt to turn the control dial coun-
terclockwise. Damage to the timer will result.
See Laundering Tips for proper washing procedures,
stain removal, and special laundering situations.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features
Bleach Dispenser
Fabric Softener Dispenser
The dispenser automatically dilutes liquid chlorine
bleach before it reaches your wash load. To use, follow
these steps:
This dispenser automatically releases liquid fabric sof-
tener at the proper time during the cycle. To use, follow
these steps:
1.Measure liquid chlorine bleach carefully, following
the instructions on the bottle.
1. Pour a measured amount of desired liquid into
dispense to fill line only.
2.Add the bleach to the dispenser before adding the
load. Avoid splashing or over-filling the dispenser.
2. If liquid comes below line, add warm water.
NOTE:
NOTE:
• Never pour undiluted liquid chlorine bleach directly
onto the load or into the wash tub. It is a powerful
chemical and can cause fabric damage, such as tear-
ing or color loss, if not used properly.
• Do not stop the washer during the first spin. This
will cause the dispenser to empty too soon.
• Never pour fabric softener directly on the load. It
will leave spots and stains.
• If you prefer to use color-safe, non-chlorine bleach,
pour it into the wash tub with your detergent. Do not
pour non-chlorine bleaches into the bleach dispenser.
• Use the dispenser for liquid fabric softeners only.
Clean the area in and around the dispenser frequent-
ly with hot water, detergent and a soft brush.
Pour liquid chlorine bleach into
bleach dispenser.
Pour liquid fabric softener into cup and
dilute with warm water.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning
Interior – hard water deposits may be removed, if
needed, using a recommended cleaner labeled wash-
er safe.
Turn off the water faucets after finishing the day’s
washing. This will shut off the water supply to the
washer and prevent the unlikely possibility of damage
from escaping water.
Lint Filter – it is self-cleaning and requires no mainte-
nance. The filter is located under the agitator on the
bottom of the washtub. During the wash and rinse
portion of the cycle,
Use a soft cloth to wipe up all detergent, bleach or other
spills as they occur.
Clean the following as recommended:
lint is collected on
Control Panel – clean with a soft, damp cloth and glass
cleaner. Do not use abrasive powders or cleaning
pads.
the filter. Then dur-
ing the spin and
drain the filter is
cleaned automati-
Cabinet – clean with soap and water followed with an
cally.
appliance wax, if desired.
Storing the washer
• Turn the water faucets off and disconnect the inlet
hoses.
Washers can be damaged if water is not removed from
hoses and internal components before storage. Prepare
the washer for storage as follows:
• Advance the cycle control knob to Spin and lower
the drain hose to eliminate any water that may be in
the drain hose.
• Select Regular, six minutes, and add one cup of chlo-
rine bleach OR white vinegar to a full load of water
without clothes. Run the washer through a complete
cycle. (Do not mix bleach and vinegar in the same
wash. Hazardous fumes can form.)
• Disconnect the washer from the electrical supply and
leave the washer lid open to let air circulate inside
the tub.
Before you call
For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures,
see the enclosed Laundry Tips brochure.
Won’t Fill
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer. If equipped with buttons, be sure
they are fully depressed.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
Won’t Agitate
• Check fuse or reset circuit breaker.
• Make sure the lid is completely closed.
• Turn the control knob to proper cycle and pull knob out to start the washer. If equipped with buttons, be sure
they are fully depressed.
• Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless the lid
is closed.
• The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector
will stop operations for your safety. Call for service.
6
Cont.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you call
(continued)
Won’t Spin or Drain
• Unevenly distributed load. Redistribute the load, close the lid and pull knob out. Check for leveling. Be sure
water level is acceptable for load size.
• Check fuse or reset circuit breaker.
• Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.
• Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless the lid is
closed.
• The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will
stop operations for your safety. Call for service.
• Suds lock – caused by too much suds. Rewash without detergent. Use correct amount of a low-sudsing deter-
gent.
Load is Wet
• The washer may have sensed an unevenly distributed load. Redistribute the load in the tub, close the lid and
pull the control knob out.
• A normal spin speed is recommended for heavy loads like jeans or towels.
Stops
• Unevenly distributed load. Redistribute the load, close the lid and pull knob out. Check for leveling. Be sure
water level is acceptable for load size.
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer.
• Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless lid is
closed.
• This may be a pause or soak period in the cycle. Wait briefly and it may start.
• The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will
stop fill operations for your safety. Call for service.
Leaks Water
• Make sure hose connections are tight.
• Make sure end of drain hose is correctly inserted and secured to drain facility.
• Avoid extended soaking – soak for 30 minutes or less.
• Avoid overloading.
Is Noisy
• Be sure washer is leveled properly as outlined in installation manual.
• Weak floors can cause vibration and walking.
• Be sure rubber feet are installed on leveling legs.
• Operating sounds will vary depending on agitation speed.
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
• If equipped with a temperature selector knob, be sure it is set directly on a temperature setting and not between
settings.
• Make sure temperature selection is correct.
• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated cor-
rectly. Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120°F (49°C) hot water at the tap. Also check water
heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:
U.S. 1-800-688-9900 or Canada 1-800-688-2002
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Maytag Clothes washer warranty
Full One Year Warranty
For one (1) year from the date of original retail purchase, any part which fails in normal home use will be repaired or
replaced free of charge.
Limited Warranty
After the first year from date of original retail purchase, through the time periods listed below, the parts designated
below which fail in normal home use will be repaired or replaced free of charge for the part itself, with the owner pay-
ing all other costs, including labor, mileage and transportation.
Second Year – All parts.
Third through Fifth Year – The drive motor. All parts of the solid state controls (if so equipped).
Third through Tenth Year – All parts of the transmission assembly.
Additional Limited Warranty Against Rust-Through
Should an exterior cabinet, including the top, lid and baseframe, rust through during the one year period starting from
the date of retail purchase, repair or replacement will be made free of charge. After the first and through the tenth year,
repair or replacement will be made free of charge for the part itself, with the owner paying all other costs, including
labor, mileage and transportation.
Please Note: This full warranty and the limited warranty apply when the washer is located in the United States or
Canada. Washers located elsewhere are covered by the limited warranty only, including parts which fail during the
first two years.
Canadian Residents
This warranty covers only those appliances installed in Canada that have been listed with the Canadian Standards
Association unless the appliances are brought into Canada due to transfer of residence from the United States to Canada.
The specific warranties expressed above are the ONLY warranties provided by the manufacturer. This warranty gives
you specific legal rights, and you may also have other rights that vary from state to state.
TO OBTAIN WARRANTY SERVICE
To locate an authorized service company in your area contact the Maytag dealer from whom your appliance was pur-
chased; or call Maytag Appliances Sales Company, Maytag Customer Assistance. Should you not receive satisfactory war-
ranty service, please call or write:
Maytag Appliances Sales Company
®
Attn: CAIR Center
P.O. Box 2370
Cleveland, TN 37320-2370
U.S. 1-800-688-9900
Canada 1-800-688-2002
U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
When contacting Maytag Appliances Sales Company, Maytag Customer Assistance about a service problem, please include
the following:
(a) Your name, address and telephone number;
(b) Model number and serial number (found on the back center of the control panel) of your appliance;
(c) Name and address of your dealer and the date the appliance was purchased;
(d) A clear description of the problem you are having.
(e) Proof of purchase.
What is not covered by these warranties:
1. Conditions and damages resulting from any of the
following:
a. Improper installation, delivery, or maintenance.
b. Any repair, modification, alteration or adjustment
not authorized by the manufacturer or an authorized
servicer.
c. Misuse, abuse, accidents or unreasonable use.
d. Incorrect electric current, voltage or supply.
e. Improper setting of any control.
2. Warranties are void if the original serial numbers have
been removed, altered, or cannot be readily determined.
3. Products purchased for commercial or industrial use.
4. The cost of service or service call to:
a. Correct installation errors.
b. Instruct the user on proper use of the product.
c. Transport the appliance to the servicer.
5. Consequential or incidental damages sustained by any
person as a result of any breach of these warranties.
Some states do not allow the exclusion or limitation of
consequential or incidental damages, so the above exclu-
sion may not apply.
User’s Guides, service manuals and parts catalogs are available from Maytag Appliances Sales Company, Maytag Customer Assistance.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|