Maxtor DVR 773W V10 User Manual

4 CH Digital Video Recorder

User’s Manual

Please read this instructions thoroughly before operation and keep the manual in a safe

place for further reference.

773W V1.0

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

What do you get ?

• FEATURES ---------------------------------------------------------------------------------------

• PACKAGE CONTENT -------------------------------------------------------------------------

Before Operation

• INSTALLATION GUIDE ------------------------------------------------------------------------

• FRONT PANEL ------------------------------------------------------------------------------------ 3

• REAR PANEL -------------------------------------------------------------------------------------

Basic Operation

• GETTING STARTED ----------------------------------------------------------------------------- 6

• OPERATION ---------------------------------------------------------------------------------------

Detailed Menu Setup

• MAIN MENU ---------------------------------------------------------------------------------------

• MENUOPTIONS ---------------------------------------------------------------------------------

Network setting guide

• HARDWARE CONNECTION AT SERVER SITE-------------------------------------------

• STATIC IP SETTING ------------------------------------------------------------------------------

• DYNAMIC IP SETTING ----------------------------------------------------------------------------

• SOFTWARE OPERATION AT CLIENT SITE -----------------------------------------------

• PLAYBACK OPERATION -----------------------------------------------------------------------

• ADVANCE SETTING -----------------------------------------------------------------------------

• CONNECT VIDEO WEB SERVER VIA IE BROWSER -----------------------------------

Advanced Operation

• OPERATION OPTIONS ------------------------------------------------------------------------

• KEY LOCK ----------------------------------------------------------------------------------------

• TROUBLE SHOOTING ---------------------------------------------------------------------------

• SPECIFICATIONS --------------------------------------------------------------------------------

APPENDIX #1 – INSTALL THE HDD -----------------------------------------------------------

APPENDIX #2 – REPLACE THE HDD ---------------------------------------------------------

APPENDIX #3 – PIN CONFIGURATIONS ----------------------------------------------------

APPENDIX #4 – RECORDING SPEED ---------------------------------------------------------

Download from Www.Somanuals.com. All Manuals Search And Download.

What do you get ?

FEATURES

DVR Features

• Remote control via internet

• Wavelet compression format replaces Time-Lapse VCR + Multiplexer / Quad

• 4 audio inputs / 2 audio outputs

• On Screen Display and Remote Control via PC

• Connect video web server via IE browser

• Auto sending message by e-mail or FTP when there have alarm.

• Auto recording when there have alarm.

• Picture-in-Picture (PIP) and Picture-on-Picture (POP) function in live, Linear Zoom (2x~4x)

• Motion detection & motion trigger recording function (16*12 detection point)

• Alarm input & output function( COM / NO / NC )

• Recording rate up to full size 30 fields/sec. or quad size 240 fields/sec.

• Multiple quick search by date/time/alarm/full/motion list

• Support IDE HDD capacity more than 400G.

• Security password protection

PACKAGE CONTENT

2 Keys

Digital Video Recorder(with HDD cartridge)

User’s Manual

Accessories pack

CD-ROM

Accessories pack

Power Adapter and Cord

Warning:

1. Please check the package to make sure that you receive the complete accessories which includes the components shown above.

2. This adaptor is suited for DC19V 2A use. If it is damaged, users can find replacement adaptor easily in the locality with this

specification.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation

INSTALLATION GUIDE

1. Connect cameras and monitor to the DVR.

2. Shown below is an example of connecting the DVR to your existing Observation System.

3. Install HDD (The compatible HDD brands are listed in the following table.)

Please refer to page.45 Appendix #1 for installation instructions.

Note: The HDD must be installed before turning on the DVR. If HDD is not installed, the DVR would function as a 4 CH multiplexer.

COMPATIBLE HARD DISK MODELS

Manufacturer

HITACHI

IBM

Model

Deskstar 180 GXP (120 GB)

Capacity

120GB

Rotation

7200 rpm

5400 rpm

7200 rpm

Deskstar 7K250, HDS722516VLAT20

Deskstar 7K250, HDS722525VLAT80

Deskstar 7K400, HDS724040KLAT80

Deskstar 120GXP (80GB)

160GB

250GB

400GB

80GB

IBM

Deskstar 120GXP (120GB)

120GB

60GB

Maxtor

DiamondMax 536DX(60GB) 4W060H4

DiamondMax Plus 9

Maxtor

80GB

Maxtor

DiamondMax Plus 9, Model#6Y120L

DiamondMax Plus 9, Model#6Y160L0

120GB

160GB

250GB

80GB

Maxtor

MaxLine Plus , Model#7Y250P0

Ⅱ

Seagate

Barracuda ATA IV, ST380021A

Barracuda ATA V, ST3120023A

Barracuda 7200.7 Plus, ST3160023A

120GB

160GB

120GB

200GB

Western Digital Caviar WD1200BB-00CAA1

Western Digital Caviar WD2000BB-00DWA0

NOTE: For non-stop long-time recording, we suggest having two HDD for recording to ensure good reliability of HDD.

Download from Www.Somanuals.com. All Manuals Search And Download.

FRONT PANEL

1. REMOVABLE HDD CARTRIDGE

& KEYHOLE

Please refer to page.44 Appendix #2.

2. CONTROL PANEL

LED LIGHT

The LED Light is ON under the following conditions.

•HDD : HDD is reading or recording.

•HDD Full : HDD is full

•ALARM : To turn off the ALARM LED light, please refer to

page.12 and set the ALARM mode as OFF.

•TIMER : When Timer is Enabled

•PLAY : Playing mode

•REC : Recording mode

Press MENU button to enter main menu.

Press ENTER button for confirmation.

ENTER

Press SEARCH button for searching recorded video.

Press ZOOM button to enlarge the picture display.

ZOOM

PIP: Press “

” button for Picture in Picture screen.

/ + PICTURE IN PICTURE

+ : Press “+ ” button can change the setting in the menu.

Press “

” button for 4 CH display modes and press twice to enter

/ - 4 CHANNELS DISPLAY MODE

POP (Picture On Picture) function.

- : Press “ - ” button can change the setting in the menu.

To slow down the speed of playing mode.

SLOW

Press Power to turn ON / OFF the DVR.

POWER

Download from Www.Somanuals.com. All Manuals Search And Download.

FF / ►

•FF : Play video fast forward. (Press FF button again to adjust speed

as 1, 2, 4, 8, 16, 32 times)

• ► : Under setup mode, it works as Right button.

•REW: Play video fast backward. (Press REW button again to adjust

speed as 1, 2, 4, 8, 16, 32 times)

REW / ◄

• ◄ : Under setup mode, it works as Left button.

•STOP : Under DVR Recording / Playing mode, it can stop the action.

STOP / ▼

• ▼ : Under setup mode, it works as Down button.

PAUSE / ▲

•Pause : Under DVR playing mode, it can make the action pause.

• ▲ : Under setup mode, it works as Up button.

PLAY

Press “PLAY” button to playback recorded video.

Press “REC” to start recording.

REC

CAMERA SELECT (1-4)

Press the Camera Select (1-4) to select the camera.

Download from Www.Somanuals.com. All Manuals Search And Download.

REAR PANEL

1. LAN

Connect DVR by LAN cable.

2. EXTERNAL I/O

•Controlled remotely by an external device or control system such as Video Web Server or PC.

•Alarm input, external I / O expansion.

3. VIDEO INPUT (1-4)

Connect to video source, such as camera.

4. CALL

Connect to CALL monitor. Show the Switch Display.

When the alarm is triggered, the call monitor will show the triggered channel for a period of time.

5. MAIN

Connect to Main monitor.

6. AUDIO IN (1-4)

Connect to audio sources, such as a microphone.

•IPS should be set to 30 (for NTSC) or 25 (for PAL)

*4 audio inputs, but can only record one input at the same time.

7. AUDIO OUT

Connect to monitor or speaker.

•IPS should be set to 30 (for NTSC) or 25 (for PAL)

* with 2 mono audio outputs from the same source.

8. FAN

For ventilation, do not block the opening.

9. POWER

Please use the provided power cord.

Warning:

1. This adaptor is only for this machine. Do not use it for other electronic product or it will damage other products.

2. This adaptor is suited for DC19V 2A use If it is damaged, user can find replacement adaptor easily in the locality with this

specification.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

GETTING STARTED

Before using the DVR, please have a HDD installed ready, or it will function as 4 CH multiplexer (refer to Appendix #1 and

Appendix #2 for installation or removal of a HDD).

Connect the AC power cord and plug into an electrical outlet. The Red LED indicator light will be ON and the DVR is

in standby mode.

Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. It

takes approximately 5 to 15 seconds to boot the system with the message : “ HDD Detecting ”. Once connected, the

POWER LED will change to green color, and the Alarm LED will be ON.

Before operating the DVR, sets the system time first. (refer to page.9).

NOTE : 1.If the HDD is not installed correctly or not installed, the “HDD not found” message will appear for 3 seconds

and then return to 4 CH Multiplexer display mode.

2.To switch the system, you need to turn off the power and pull out the AC power cord before reconnecting the

power. And after pressing “POWER” + “FF” to NTSC system or “POWER” + “REW” to PAL system and

reconnect the AC power cord, the system of the DVR will be switched.

OPERATION

RECORDING

The DVR offers 4 recording modes, variety of recording modes. Refer to p.11 for advanced setting of recording speed and

resolution. Under the recording status, if power is off accidentally, the recorded video will still be stored in the HDD. And

the DVR will return to original recording setting after the power restores again.

On the screen, you will find the date, time, HDD recording type, the available space of HDD (in GB) left and the symbol

“

” represents the recording mode.

2002 – JAN –01 01:02:03

NOTE : 1. Under O/W recording mode, previously recorded files will be

automatically overwritten without further warning notices, when the

HDD is full.

●OW

(OW : HDD Overwrite)

2. If the HDD capacity is only 5 GB left, it will display “5 GB” on the up-right

screen and shows orange color, and it will buzz for seconds; so as in 4GB, 3GB, 2GB and 1GB. If the

O/W Recording mode (NOTE 1) is on, it won’t have the warning buzzer.

There are 4 recording modes: Alarm, Motion, Timer and Manual Recording.

1. ALARM RECORDING

DVR is triggered by an alarm input.

symbol will be shown on the triggered channel. (refer to page12)

symbol will be shown on the triggered channel. (refer to page13)

2. MOTION TRIGGER RECORDING

Recording is triggered by motion detection.

3. TIMER RECORDING

Recording is scheduled by a Timer. It will indicate by the symbol . (refer to page9)

4. MANUAL RECORDING

Recording is initiated manually by pressing the REC button. Symbol

will be shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAY BACK

Press “PLAY ” button, the DVR will show the last recording.

1. FAST FORWARD (F.F.) & FAST REWIND (F.R.)

You can increase the speed of Fast Forward and Rewind on the DVR.

In the Play mode, press “ ► ” once to get 2X speed forward and press twice to get 4X speed,… and the maximum

speed can reach 32X.

Press “◄ ” once to get 1X speed rewind and press twice to get 2X speed, … and the maximum speed can reach

32X.

2. SLOW FORWARD (S.F.) & SLOW REWIND (S.R.)

You can also slow down the speed of Forward and Rewind on the DVR.

In the Play mode, press the SLOW button and you will enter Slow mode.

Press ” SLOW ” once to get 1/2X speed forward and press “ ► ” to get 1/4X speed,… and the slowest speed can

reach 1/32X.

Press “◄ ” once to get 1/2X speed rewind and press twice to get 1/4X speed, … and the slowest speed can reach

1/32X.

3. PAUSE

You can make the playback pause and the image will be displayed on the screen.

4. STOP

Press “ STOP ” button under any circumstance, the DVR will return to live monitoring mode.

5. IMAGE JOG DIAL

It will allow you to manually view video frame-by-frame, one image at a time.

While in PLAY mode, press “ PAUSE ”, and the screen will pause.

Press “ ► ” button advances the frozen screen one image forward.

Press “ ◄ ” button moves back one image.

Note: During the LIVE or PLAY mode, press “ENTER” + “SEARCH” buttons at the same time to switch the “NORMAL” and

“SHARPNESS” display.

6. SHARPNESS

When in play mode, press “ENTER + SEARCH” to switch the sharpness( normal or sharpness )

CAMERA SELECT (1-4)

Press Camera Select (1-4) to select the camera to display in full screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detailed Menu Setup

MAIN MENU

There are 12 options available in the Main Menu:

(MENU)

TIMER

TIMER ---------- Program Timer Recording

CAMERA ------- Camera Setup

RECORD ------- Recording Mode Setup

ALARM --------- Alarm Setup

DWELL --------- Dwell time Setup

PIP --------------- Picture in Picture Setup

MOTION -------- Motion Detection Setup

DISPLAY ------- Display Mode Setup

NETWORK -----Network Setup

CAMERA

RECORD

ALARM

DWELL

PIP

MOTION

DISPLAY

NETWORK

USER

USER ----------- User Password Setup

SYSTEM ------- System Setup

EVENT --------- Event List

SYSTEM

EVENT

Outlined below are the buttons used for Menu setting :

•“▲” and “▼” : Scroll up and down within a menu option.

• “◄” and “►” : Scroll sideways within a menu option that has been selected.

•“ + ” and “ - ” : Increase and decrease the number or change values when an option is selected and is blinking.

•ENTER : Select a submenu / an option under a submenu for browsing / modification.

•MENU : Complete modification of a menu option; exit a menu.

MENU OPTIONS

SYSTEM

(MENU)

TIMER

1. AUDIO INPUT

To choose one of 4 channels to record. (It can only record 1 input at the same time)

CAMERA

RECORD

ALARM

DWELL

PIP

MOTION

DISPLAY

NETWORK

USER

2. BUZZER

Set the BUZZER “ON”, it will buzzer by event occurrence when the setting is ON.

3. EXT ALARM

To set the EXT ALARM. It will be trigged by event occurrence when the setting is ON.

4. VLOSS ALARM

To set the VLOSS ALARM. When the setting is “ON”, the alarm will start by the setting

of Buzzer, EXT alarm or Alarm Duration.

SYSTEM

EVENT

5. MOTION ALARM

To set the MOTION ALARM. When the setting is “ON”, the alarm will start

by the setting of Buzzer, EXT alarm or Alarm Duration.

6. KEY MUTE

To set the KEY MUTE. When the setting is “YES”, there will be no sound when you press any key.

7. HDD OVERWRITE

To set the HDD OVERWRITE. When the HDD is full under O/W recording mode, previously recorded

files will be overwritten without further warning notices if the HDD OVERWRITE is ON.

Download from Www.Somanuals.com. All Manuals Search And Download.

8. MESSAGE LATCH

To select whether the DVR messages will disappear after 10

seconds or remain on screen. NO is the default setting which the

messages will disappear after 10 sec.

NOTE : Video loss, Alarm and Motion messages will be shown

like the Alarm Duration time.

(SYSTEM)

AUDIO INPUT

BUZZER

EXT ALARM

VLOSS ALARM

MOTION ALARM

KEY MUTE

HDD OVERWRITE

MESSAGE LATCH

DATE DISPLAY

9. DATE DISPLAY

YES

D/M/Y

To set the date Y/M/D, M/D/Y, D/M/Y or OFF on the monitor.

10. DATE

To set the date on the DVR.

DATE

26-DEC-2003 [FRI]

TIME

CLEAR HDD

SYSTEM RESET

22:55:34

YES

11. TIME

YES

To set the time on the DVR.

12. CLEAR HDD

Delete all the contents of the HDD. When you choose “YES” on this option, press “ENTER” and you

will be prompted with the question shown: Press “→” to clear HDD or press ”←” to cancel.

13. SYSTEM RESET

Reset all system settings back to factory default settings. Select “YES” and press “ENTER” button.

TIMER

1. DAY

Select the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedule

the DVR to automatically record.

NOTE :

1. Date could be changed by “+” and “-” buttons.

2. If you have selected the date and Timer recording set from that specific day

to a new day, then the Timer Recording Schedule will be set as whole week.

For specific date of Timer Recording Schedule, it is not recommended to set Ending

Time over 23:59. For example: If you set Timer Schedule Day as Sunday, and

START from 11:30, but End on 00:20, then Recording Timer Schedule is set as from

every Sunday's 11:30 to next Sunday‘s 00:20. If you only want to set Recording

Timer Schedule from every Sunday 11:30 to Monday 00:20, then you should set

Recording Timer Schedule as Sunday from 11:30 to 23:59, and Monday from 00:00

to 00:20.

3. It is not suggested that users press “STOP” button or restart the system during setting

time. In doing so, the recording will stop, and users can resume recording by pressing

“ENTER” + “MENU”.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. START

(TIMER)

DAY START END IPS QLT MODE

DAILY 01:00 22:00 30 BEST Q-FR

OFF 00:00 00:00 30 BEST Q-FI

OFF 00:00 00:00 30 BEST Q-FR

OFF 00:00 00:00 30 BEST MUX

OFF 00:00 00:00 30 BEST Q-FI

TIMER ENABLE : YES

Set the time to start the recording.

3. END

Set the time to end the recording.

4. IPS (IMAGE PER SECOND)

NTSC－30、15、8、4、2、1

PAL－25、12、6、3、2、1

5. QUALITY

Select the quality of recording image: BEST, HIGH, NORM and BASIC.

6. MODE

There are three recording mode settings :

QUAD-FRAME, QUAD-FIELD, MULTIPLEX.

NOTE: To select the appropriate recording mode before

you start recording. We don’t suggest users to change

the different recording mode during recording

to ensure the best recording quality.

7. TIMER ENABLE

When TIMER ENABLE is “YES”, press “menu” button, and you

can see the timer diagram according to your setting.

CAMERA

1. TITLE

Assign a title to each camera. Initially each title is the camera’s number.

2. ALARM

Select LOW / OFF / HIGH for alarm polarity. The default value is LOW.

(CAMERA)

HUE

REC

ALARM

LOW

TITLE

CAMERA01

CAMERA02

OFF

CAMERA03

CAMERA04

HIGH

Download from Www.Somanuals.com. All Manuals Search And Download.

3. REC (RECORD)

Set up which channel you want to record.

ON : when alarm input is triggered, DVR will record alarming channel more frequently.

For example : when CH01 is triggered, the record method will become 1-2-1-3-1-4….

OFF : DVR will not record.

4. BR (BRIGHTNESS)

Adjust the brightness of each channel. The level is from 0 to 63.

5. CT (CONTRAST)

Adjust the contrast of each channel. The level is from 0 to 63.

6. CL (COLOR)

Adjust the color of each channel. The level is from 0 to 63.

7. HUE (HUE)

Adjust the hue of each channel. The level is from 0 to 63.

RECORD

1. RECORD IPS

Select the recording speed. The options are

(RECORD)

RECORD IPS

QUALITY

as following :

NORMAL

NTSC－30、15、8、4、2、1

PAL－25、12、6、3、2、1

RECORD MODE QUAD-FRAME

2. QUALITY

There are four quality settings : BASIC, BEST, HIGH, NORMAL.

NOTE : Please refer to page.49 APPENDIX #4 recording speed for the relationship of recording time, IPS

and recording quality.

3. RECORD MODE

There are three recording settings : QUAD-FRAME, QUAD-FIELD, MULTIPLEX.

NOTE: To select the appropriate recording mode before

you start recording. We don’t suggest to change

the different recording mode during the recording

to ensure the best recording quality.

Download from Www.Somanuals.com. All Manuals Search And Download.

ALARM

1. ALARM ENABLE

Alarm will be triggered by event occurrence when the setting is YES.

2. ALARM DURATION

Set the reaction time which was determined by how long the alarm mode

responded to a buzzer. Default setting is 10 sec. Options are 10 Sec, 15 Sec, 20

Sec, 30 Sec, 1 MIN, 2 MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN, 30 MIN, ALWAYS, AUTO.

NOTE : 1. Video loss, Alarm and Motion messages is shown like the Alarm Duration time is.

2. When the setting is AUTO, the alarm duration time is based on the setting of the external

alarm device.

3. During ALARM DURATION’S setting time, users can restart ALARM/MOTION function by

pressing both “ENTER” + “STOP” buttons.

3. REC IPS

Select the images per second of recording during an ALARM.

The options are as following:

NTSC－30、15、8、4、2、1

(ALARM)

ALARM ENABLE

ALARM DURATION

RECORD IPS

QUALITY

YES

15 MIN

PAL－25、12、6、3、2、1

NORMAL

4. QUALITY

There are four quality settings during an alarm.

ALARM : BASIC, BEST, HIGH, NORMAL.

RECORD MODE

QUAD-FRAME

5. RECORD MODE

There are three recording settings : QUAD-FRAME, QUAD-FIELD,

MULTIPLEX.

(DWELL)

NORM ALARM

CAM1

CAM2

CAM3

CAM4

DWELL

1. NORM

To set up the DWELL time period that each channel auto sequentially shows on call

monitor. The level is from 1 to 15 Sec or OFF.

2. ALARM

To set up the DWELL time period when alarm input is triggered.

The level is from 1 to 15 Sec or OFF.

PIP

(PIP)

FULL SCREEN

PIP SCREEN

POSITION

CAM 1

CAM 2

D/R

1. FULL SCREEN

To set up the full screen background picture display.

2. PIP SCREEN

To set up the picture with a 1/9 size screen “insert”.

3. POSITION

There are six position settings : D/L, D/M, D/R, U/L, U/M, U/R.

Download from Www.Somanuals.com. All Manuals Search And Download.

MOTION

(MOTION)

SEN MD-NUM RE DET

CAM1

CAM2

CAM3

CAM4

64 ON AREA

64 OFF AREA

64 ON AREA

MOTION RECORD : ON

DAY

START

END

DAILY 00 : 00

00 : 00

1. SEN (SENSITIVITY)

Sets the sensitivity of the pixel-based Motion Detection feature from 1 to 99.

The highest sensitivity setting is 01, the lowest sensitivity setting is 99.

The default setting is 70.

2. MD-NUM (MOTION DETECTION NUMBER)

Sets the number of targets of the motion detection to occur in order to trigger an Alarm

(from 1-99 target areas).

Note: MD-NUMcannot be less than the number of targets set in the AREA.

3. RE (REFERENCE)

Set the Reference image to which the current screen is compared (from 1-99).

For example, the value 64 would compare the current image to the 64^thprevious

screen image. The higher value may increase the sensitivity.

4. DET (DETECTION)

The motion detection on each channel can be turned to be

ON or OFF individually.

5. AREA

Press the ENTER button on this option to set the Pixel-based

Motion Detection Area for each channel. Red targets represent

where the target is (Figure 1-1). Green targets represent the

Motion Detection Area(Figure 1-2), and Purple targets represent

motion currently taking place (Figure 1-3). After stopping the detection,

the color of target will be green (Figure 1- 4).

To modify the Motion Detection Area, use the following controls:

ZOOM: turn the selected target ON/OFF.

▲▼◄►: navigates between targets

- : turns all targets on the screen ON/OFF

+ : turn all targets in the selected row ON/OFF

Note: When the “DET” (DETECTION) setting is “ON”, you must set the motion detection

area or it won’t be triggered.

Download from Www.Somanuals.com. All Manuals Search And Download.

Figure 1-1

Figure 1-2

MOTION DETECTION SETUP

MOTION DETECTION SETTING — ROW SETUP

10 11 12 13 14 15 16

Figure 1-3

MOTION DETECTION TRIGGERED-TURN INTO PURPLE

Figure 1-4

BACK TO MOTION DETECTION SETTING

10 11 12 13 14 15 16

6. MOTION RECORD

When the DET setting is “ON”, you can set up the MOTION RECORD function,

1. Select “ON” to set up the motion trigger recording: It can automatically switch to Record Mode. The motion

detection will change the scanning sequence and show on the monitor.

NOTE: The triggered recording time is based on ALARM DURATION mode setting (Please refer to page.12 for ALARM DURATION) and it will

record from the last triggered time. For example, when the alarm duration setting is 1 min, the recording time is from 9:00:00 to 9:01:00. If

the motion detection is trigged again at 9:00:40, the trigged recording time will be from 9:00:00 to 9:00:40 and 9:00:40 to 9:01:40. The total

recording time is 00:01:40.

For example : If the motion is detected on Camera #1, its recording & scanning sequence will be more frequently. The sequence

will be as 1st, 2nd, 1st, 3rd, 1st, … 4th. And channel 1 will show

camera and 3rd camera are both activated, they will be scanning as 2nd, 3rd, 1st, 2nd, 3rd, 4th, 2nd, 3rd, 1st, 2nd, 3^rd,

4th … and vice versa. And CH2 & CH3 will show for a period oftime which is just like the Alarm Duration time.

on the screen. If the motion detection of 2nd

2. Select ”OFF”: The screen still shows

and if it is in recording mode, the motion detection will change the

scanning sequence.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. DAY / START / END

To setup the DAY and the START/ END time for motion trigger recording timer setting.

DISPLAY

(DISPLAY)

TITLE DISPLAY

OSD COLOR

LOSS SCREEN

TIME POSITION

YES

YELLOW

GREEN

1. TITLE DISPLAY

To set the title shown on monitor or not.

NORMAL

2. OSD COLOR

Select the OSD (On Screen Display) color. The options are

YELLOW, GREEN, CYAN, BLUE, PINK, GRAY, WHITE, RED.

3. LOSS SCREEN

Retain the last picture or select the LOSS SCREEN color.

The options are GREEN, BLACK, BLUE and RETAIN.

4. TIME POSITION

To set the OSD POSITION shown on monitor.

The options are NORMAL or CENTER.

NETWORK

(NETWORK)

1. SERVER IP

SERVER IP

GATEWAY

NET MASK

DNS

061.062.147.111

061.062.147.254

255.255.255.000

168.095.001.001

00080

To set the the IP address

2. GATEWAY

To set the gateway

WEB PORT

RESET DEFAULT

3. NET MASK

To set the net mask

4. DNS

To set the DNS

5. WEB PORT

To set the web port

6.RESET DEFAULT

Go back to default setting YES/NO

Download from Www.Somanuals.com. All Manuals Search And Download.

USER

1. USER

(USER)

PASSWORD

To set up the user account for controlling. It

allows 8 users setting.

Supervisor – Control all the functions.

Other Users – View all functions except the

menu setting and event list

cleaning.

SUPERVISOR

USER 1

0000

USER 2

USER 3

USER 4

USER 5

USER 6

USER 7

2. PASSWORD

To set the security password for each account.

The maximum length of user’s password is 4

characters.

NOTE: To switch to different USER, press

“ENTER” + “MENU” buttons to “KEY

LOCK” and then enter the different user’s

password to UNLOCK.

EVENT

A single page can display 16 recorded events. Press “◄ ” or “► ” to change the

pages or press “▲” + “▼” to CLEAR the EVENT record.

C1 VLOSS

C2 ALARM

K UNLOCKS 26-DEC-2002 03:00:00

M-HD ERR 26-DEC-2002 03:00:00

M-HD WARM 26-DEC-2002 03:00:00

PWR REST 26-DEC-2002 03:00:00

26-DEC-2002 03:00:00

DISK FULL: HDD is full

PWR REST : Power restored

M-HD REMS: HDD remove

M-HD REPL: HDD replace

DMA ERROR 26-DEC-2002 03:00:00

M-HD REPL 26-DEC-2002 03:00:00

↑+↓: CLEAR

M-HD ERR : HDD error

M-HD WARM: HDD warming

K UNLOCKS: Key unlock

DMA ERROR: DMA error

C1 VLOSS : The video of Channel 1 is lost

C2 ALARM : Channel 2 has been triggered by external I/O alarm

C3 MOTION: Channel 3 has been triggered by motion detection

SYSTEM ERROR: System might fail

POWER RESTORE : Power restored

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware CONNECTION

AT SERVER SITE

Network Setting Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

STATIC IP SETTING

STEP1: Software installation

1.Put the attached CD into a CD-ROM and it will start to install the application program into PC.

2. Press “Next”.

3.Choose destination location and press “Next”.

Download from Www.Somanuals.com. All Manuals Search And Download.

4.Set program shortcuts setting and press “Next”.

5.Press “Next” to begin to copy files

6.After the installation, there are 6 files and 1 folder in your assigned path (file folder) as below.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step2 : Static IP setting

In DVR MENU / NETWORK set SERVER IP, GATEWAY, NET MASK, DNS and WEB PORT which are provided from

your local ISP ( internet service provider ).

(MENU)

TIMER

CAMERA

RECORD

ALARM

DWELL

PIP

MOTION

DISPLAY

NETWORK

USER

SYSTEM

EVENT

For example

(NETWORK)

SERVER IP

GATEWAY

NET MASK

DNS

061.066.138.074

061.066.138.073

255.255.255.000

168.095.001.001

00080

WEB PORT

RESET DEFAULT

After all network settings are finished, please connect DVR and static IP.

Static IP

Download from Www.Somanuals.com. All Manuals Search And Download.

Step3 : Connect PC and DVR via internet

Click

twice and enter your User name, Password (Note : If you never change the “Account” before, the User Name

and Password are both “admin”) and Server IP which you have set to DVR in step 2. Then click OK to connect.

Download from Www.Somanuals.com. All Manuals Search And Download.

DYNAMIC IP SETTING

Step1 : Software installation

1.Put the attached CD into a CD-ROM and it will start to install the application program into PC.

2. Press “Next”.

3.Choose destination location and press “Next”.

Download from Www.Somanuals.com. All Manuals Search And Download.

4.Set program shortcuts setting and press “Next”.

5.Press “Next” to begin copying files

6.After the installation, there are 6 files and 1 folder in your assigned path (file folder) as below.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step2 : DDNS apply

1. Click on free site “http://www.dyndns.org” ( please look at the example below, you can also apply DDNS in

other DDNS web page) and “ACCOUNT”

2. Press “Create Account”

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Register the information and click on “Create Account”

4.After registering your account, you will receive an e-mail, which contains instructions to

activate your account. If you do not follow these directions within 48 hours, you will need

to re-register your account.

5.Login your account.

Download from Www.Somanuals.com. All Manuals Search And Download.

6.Click on“Account” and “Add Host”

7 Users can set up their own DDNS HOST. For example, the user’s applied Host name

is “avtech.dyndns.org”. And then press “Add Host” to finish the setting.

(NOTE : Some routers don’t support some DDNS HOST)

test

Step3 : Login router

NOTE : The following settings are different from router to router. Please read the

instruction of your router thoroughly.

1.Connect PC and router (LAN end)

LAN end

POWER

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is

Win 2000 or Win 2003, the setup procedure is similar to that of Win XP O/S.)

Local Area Connection

Enabled

Realtek RTL8139 Family

Click

twice

3.Click “Properties” for TCP/IP setup

Download from Www.Somanuals.com. All Manuals Search And Download.

4.Click on “INTERNET PROTOCAL (TCP/IP)” and then select “Properties” to setup

5.Choose “Obtain an IP address automatically”

6. Enter “Command Prompt”

Download from Www.Somanuals.com. All Manuals Search And Download.

7. In the setting window, enter “ ipconfig” to write down router’s gateway(e.q. 192.168.1.1)

8. Close the window in the above step. Enter the IP address ( router’s gateway : 192.168.1.1 )

to log in to the router from internet explore. And then enter the login web page and key

in the router’s user name and password.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step4 : Router setting

NOTE : In the router setting, we have four steps as follows.

1. Dial setting

2. DHCP setting

3. Virtual server setting

4. DDNS setting

1.Press “INTERNER PORT” and choose your WAN type (e.q. PPPoE), and then enter

your “User Name” and “Password” of dialing up to dynamic IP. Press save after

you finish the set up.

test

2. Press “LOCAL PORT” and set “Start IP address” and “Number of IP address”.

(For example, if the IP address of DVR is 192.168.1.10,then 10 is excluded from the setting range) Press

save after you finish setting up.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. In “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set “Port Number” to 80

for DVR. And set “Local Server IP Address” to 192.168.1.10. Press add after you finish the set up.

4. In “ADVANCED SETUP / Dynamic DNS”. Key in the “DNS Account”, “User Name” and

“Password” that you applied in step 3. Press save after you finish the set up.

test

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 5 : IP setting

In DVR MENU / NETWORK set SERVER IP, GATEWAY, NET MASK, DNS and WEB PORT.

(MENU)

TIMER

CAMERA

RECORD

ALARM

DWELL

PIP

MOTION

DISPLAY

NETWORK

USER

SYSTEM

EVENT

For example

(NETWORK)

SERVER IP

GATEWAY

NET MASK

DNS

192.168.001.010

192.168.001.001

255.255.255.000

168.095.001.001

00080

WEB PORT

RESET DEFAULT

Step6 : Connect router

ADSL modem

(WAN end)

Download from Www.Somanuals.com. All Manuals Search And Download.

Step7 : Connect to DVR via internet

1. Change PC network setting to the original setting and link PC to the internet.

2. Click

twice and enter your User name, Password and host (Note : If you never change the “Account”

before, the User Name and Password are both “admin”). Then click OK to connect.)

DDNS HOST

Note of Dynamic IP setting

*In step 2.7 : Some routers don’t support some DDNS HOST.

*In step 3.1 : Please use router’s LAN end to connect PC.

*In step 3.8 : Please use IE browser to enter router’s gateway.

*In step 4.1 : Please make sure that you have pressed save after you finish setting.

*In step 4.2 : Please make sure that you have pressed save after you finish setting.

*In step 4.3 : Please make sure that you have pressed add after you finish setting.

*In step 4.4 : Please make sure that you have pressed save after you finish setting.

*In step 6 : Please use router’s LAN end to connect to DVR. Use WAN end to connect to ADSL modem.

*In step 7 : The Server IP is the DDNS HOST which you set in step 4.4.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOFTWARE OPERATION AT CLIENT SITE

Follow the steps for connection at your client site (remote site). (e.g. If you set up the server at your office with one static ADSL,

you can remotely proceed to watch the video anywhere with a networked computer.)

Step 1：Click

twice to enter Login setup (please refer to “software installation”)

Step 2：Key in “User Name” and “ Password”. (e.g. “User Name” and “Password” are “dan”

and the IP address is 61.222.50.174). Click “OK” to establish the connection.

NOTE:

1.There are two ways to get the software,

one is via the attached CD, and the other is via

Video Web Server.(Refer to APPENDIX#3)

2.You can press “Address Book”

button to add a new IP into this

table or choose any logined IP

address to access the Video Server.

3.This function is designed to store

the list of IP addresses which you

can control and manage.

Step 3：If you could see the video screen as following, you have been successfully connecting to

the server.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction of Basic Operation

A. Video Web Server control panel

B. Digital device control panel

1112

1.Camera video inputs

2.PIP, POP, QUAD screen

3.Zoom, Select, Lock, Search, Enter

4.Stop, Record, Rewind, Fast Forward, Pause,

Slow, Play

5.Menu, Left, Right, Up, Down, Exit

NOTE：

After you press the record icon, there will be a recording file in the path that you

have set. Each recording file can be saved up to 6000 frames. The recording file

will be assigned to the second file if it has more than 6000 frames. Besides, if

the HDD space is less than 200MB, the program will stop recording.

1.Image transmission rate per second

2.Data transmission rate

3.Power

4.Disconnection

5.Resolution : VGA、QVGA

6.Image quality : High、Middle、Low

7.Image adjusting : Brightness/ Contrast/ Saturation

8.Snapshot : press this button, the image will be automatically

saved in the PC.

9.Record : press this button, the recording file will be saved

in the PC automatically.

10.System setting

11.Number of online users

12.Window adjust ( right click for Full Screen)

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYBACK OPERATION

Please find a recording file in the PC and click twice on it to playback.

7 8 9 10 11

2 3

1. On Screen Display

2. Snapshot

3. Stop

4. Pause

5. Slow (1/2, 1/4, 1/8)

6. PLAY

7. Fast

8. OSD show / hide

9. System setting (Path of snapshot,

text color, progress color, channel

color)

10. Next (Play next file on the same folder)

11. Duration time / Play speed

12. Playback controlling bar

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED SETTING

Click “System Config” for advanced setting.

NOTE :

Apply--

After all setting changes, press “apply” to

refresh the data.

Reboot--

SYSTEM CONFIG

Press this button to restart setting.

ACCOUNT

Set up the user’s account( Max 10 accounts) ,

password and authority ( Max 6 accounts in line

at the same time) .

1.User’s level:

SUPERVISOR-control all the functions

USER LEVEL-control advanced functions

GUEST LEVEL-control basic functions only

2.Life time : During the period of time,

users are allowed to control the Video

Web Server.

Set up the ALARM function. You can use it

to operate “alarm trigger recording” function.

ALARM

1.Alarm : Enable or disable Alarm trigger function.

2.Method : Two selections—E-mail or FTP.

3.Resolution : Image storing resolution for

Email or FTP function(SUBVGA is

160 *120 QVGA is 320*240)

4.Alarm Duration : Alarm and alarm record

duration time.

5.Alarm record : Enable or disable “Alarm

trigger recording” function.

7.Alarm refresh : Clean the alarm message “

”

which is showed on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

MAIL

When the alarm is triggered, the video server program

will capture the instant picture and e-mail the captured

image to the assigned recipients.

1.You can get all the data from the ISP

company or by mailing to the server

supplier.(POP3/SMTP server)

2.You should set the mail list which you

want to send to when the alarm is

triggered.

3.If it is not necessary for you to verify

password and user’s name, please

choose Verify as “No”.

FTP

When the alarm is triggered, the video

server program will capture the instant

picture and upload the captured image to

the assigned FTP site.

1.You can get all the data from your

MIS department.

2.The default uploading port is No.21.

3.You can set the uploading

directory by yourself.

RECORD

You can modify the storing path for recording

file and snapshot images by yourself.

Download from Www.Somanuals.com. All Manuals Search And Download.

TOOLBOX

Upgrade the firmware and get the online

users’ information.

NOTE :Do not reboot the DVR while

it is upgrading the firmware.

1.Firmware Version : The current firmware

version. You can click on “Find” button to

get the latest firmware from PC and press

“Upgrade Firmware” to upgrade it.

2.Info refresh : Refresh the online users’

information.

PERIPHERAL

You can see the default peripheralsettings

in this Windows.

1.Turbo Step: Set the shift step when you

shift the zone which you see during the

zoom in function.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECT VIDEO WEB SERVER VIA IE BROWSER

You can also connect Video Web Server via browser. This function is suitable in both WIN 2000 and WIN XP ( WIN XP is

preferable to WIN 2000)

Step 1：Open IE browser, in Tools/ Internet Options/Security/Custom Level, please select “Enable” for all options of

ActiveX.

Step 2：Enter IP address that you want to connect.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3：Enter your Username and Password to login Video Web Server.

Step 4：After you login, you will see as below.

1.Image transmission rate per second

2.Data transmission rate

3.User name

10.Quality switching button

11.Download AP button

12.Menu, Left, Right, Up, Down, Exit

13.Lock, Zoom, Enter, Search, REC.

14.Stop, Record, Rewind, Fast Forward, Pause, Slow, Play

15.Camera

4.Video CHs

5.Channel switching button

6. Resolution : VGA、QVGA

7.Image quality : High、Middle、Low

8.Resolution switching button

9.Number of online users

16.4, 9, 16, Multi, PIP, POP, Power, Focus, Zoom

17.ESC, VCR, LIVE, FREEZE, AUTO

18.Position of view

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Operation

OPERATION OPTIONS

ZOOM

Press ZOOM button to enlarge the display of main picture. It displays zoomed picture on main picture and a small window

inserted. The inserted window contains a movable 1/4 view size of the appointed camera. The range is from 2X to 4X.

• Press PIP button : Zoom in

• Press QUAD button: Zoom out

• Press the “Zoom” button again to leave the zoom pointer.

• Press Camera 1-4 button to select channel.

• Press ▲▼◄► button to move the zoom position.

Original

2X Zoom

4X Zoom

VIDEO LOSS

Screen will display “LOSS” in the center of display picture, if the video input is not connected properly.

1. LAST RECORD

LAST RECORD

FULL LIST

ALARM LIST

MOTION LIST

TIME SEARCH

Play the last recorded piece of video.

2. FULL LIST

List all recorded video on the HDD that are sorted by time.

: Motion Recording

: Manual Recording

: Alarm Recording

: Timer Recording

M : Storage in Master HDD (or S:Storage in Slave HDD)

2003-JAN-01 01:02:03 M

2003-JAN-05 05:02:03 M

2003-MAR-12 04:02:03 M

2003-APR-02 03:02:04 M

2003-MAY-01 05:02:03 M

2003-AUG-09 01:02:01 M

← : PAGE UP → : PAGE DOWN

NOTE: It will display different color on each record list

mention above.

3. ALARM LIST

List all recorded video triggered by an Alarm.

NOTE : If there is no Alarm in the record, the screen will

display “EMPTY”.

4. MOTION LIST

List all motion triggered recordings.

5. TIME SEARCH

Find video recorded on a specific date.

Download from Www.Somanuals.com. All Manuals Search And Download.

KEY LOCK

For advanced security, users can “Lock” the buttons on your DVR. Key-Lock prevents other people from using the system.

Press “ENTER” + “MENU” at the same time to enable Key Lock.

Press “ENTER” + “MENU” at the same time and key in password (Default : 0000),

then press “ENTER“ to disable Key Lock.

NOTE: To switch to different USER, press “ENTER” + “MENU” buttons to “KEY LOCK” and then enter the

different user’s password to UNLOCK.

TROUBLESHOOTING

When malfunction occurs, it may be not serious and can be corrected easily. The table below describes some typical

problems and their solutions. Please check them before calling your DVR dealer.

PROBLEM

SOLUTION

No power

Check power cord connections.

Confirm that there is power at the outlet.

Not working when press any

button

Check if it is under Key Lock mode.

Press "

& "

to exit Key Lock mode.

ENTER"

MENU"

No recorded video

Timer Record enable does not

working

Check if the HDD is installed properly.

Check if the Record Enable is set to YES

No live video

Check camera video cable and connections.

Check monitor video cable and connections.

Confirm that the camera has power.

Check the setting of camera lens.

To switch the system, press “ ” + “ ” to NTSC

POWER FF

NTSC & PAL System switch

system and “

” + “

” to PAL system.

(Refer to Page 7 "GETTING STARTED". )

POWER

REW

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

Camera Input Signal

Network Interface

Protocals

Composite video signal 1 Vp-p 75 BNC, 4 channels

Ethernet (10/100 Base-T)

TCP/IP, ICMP, SMTP, HTTP, FTP

Main Monitor Output

Call Monitor Output

Composite video signal 1 Vp-p 75 BNC

4 audio inputs, (RCA) *

2 audio outputs, (RCA) **

16 * 12 targets per camera

Audio input

Audio output

Motion Detect Area

Motion Detect Sensitivity

99 Levels

Yes

Video Loss Detection

Refresh Rate

240 fields/sec. <NTSC> / 200 fields/sec. <PAL>

Multiplex:Up to 30 fields/sec.< NTSC> / 25 fields/sec.<PAL>

Quad-field:Up to 120 fields/sec.<NTSC> / 100 fields/sec.<PAL>***

Quad-frame:Up to 240 fields/sec.<NTSC> / 200 fields/sec.<PAL>****

Recording Rate

Programmable (1~15 Sec)

Yes (Movable)

Dwell Time

Picture in Picture

Key Lock

Yes

2*2 ~4*4 (Movable)

8 letters

Picture Zoom

Camera Title

Video Adjustable

Hue/ Color/ Contrast/ Brightness Adjustable

TTL input, Hi (5V), Low (GND)

COM./N.O/N.C

Alarm Input

Alarm Output

Trigger & Action

E-Mail images or images uploading to FTP site's specific account/

Remote Recording

Yes

Web Interface

YY/MM/DD, DD/MM/YY, MM/DD/YY, OFF

Time Display Format

Power Source

DC 19V

<32W

Power Consumption

Operation Temperature

10 ~ 40

℃

Dimension (mm)

343(W) x 223(L) x 59(H)

• Specifications are subject to change without notice.

* 4 audio inputs, can select only 1 during operation for recording at the same time.

** with 2 mono audio outputs from the same source.

***NTSC: 4CH x 30IPS = 120 fields/sec, PAL: 4CH x 25IPS = 100 fields/sec

****NTSC: 4CH x 60IPS = 240 fields/sec,PAL: 4CH x 50IPS= 200 fields/sec

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX #1 – INSTALL THE HDD

Follow the steps carefully in order to ensure correct installation.

The compartment located on the front panel of the DVR is the removable Cartridge, in which

you insert the HDD. The various parts of the Cartridge are labeled for your reference.

***Note: Users need to set the HDD on the Master mode for the system detecting.***

Step 1 Connect the connector with the HDD (refer to Picture 1).

Step 2 Put HDD into the HDD cartridge. Please notice the bottom side is power side as chart shows

(refer to Picture 2).

Step 3 Screw the HDD to the cartridge. Before you screw the HDD, please be aware that you must to level

pin 1 of the HDD at pin 1 mark, because the screw hole is different from different HDD brands.

Then screw the HDD correctly (refer to Picture 3 and 4). You must precisely align the

hard disk to the pin connection to ensure correct installation.

Step 4 Reverse the HDD and put it into DVR (refer to Picture 5 and 6).

Step 5 Connect the HDD with DVR (refer to Picture 7).

Step 6 Lock the cabinet by turning the key clockwise (refer to Picture 8).

A ( locked )

B ( unlocked )

Note : If you do not lock the cabinet, the DVR system will not function properly.

Step 7 Close the cap (refer to Picture 9).

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX #2 – REPLACE THE HDD

A ( locked )

B ( unlocked )

Step 1 Open the cap

Step 2

Unlock the cabinet by turning

the key anti-clockwise

Step 5

Remove the HDD from

Cartridge

Loosen all screws on

the Cartridge

Step 4

Step 3

Pull out the cartridge

Note: 1. If you want to change a different HDD, you must remove the connectors from HDD ( refer to Page 51 ).

2. When HDD works for a period of time, the surface temperature will be high, please pay attention to it.

3. After turning the key to unlock position, please wait for several seconds until HDD operation stops

completely.

HDD HOT SWAP FUNCTION

Please follow the steps as following to ensure the reliability.

1)Unlock the cabinet by turning the key anti-clockwise.

2)Key in your password and press enter to disable the hard drive.

3)Pull out the HDD cartridge.

4)Replace the HDD in the tray.

Note: After turning the key to unlocked position, please wait for several seconds till HDD

operation stops completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX #3– PIN CONFIGURATIONS

15 pin com port

•

DVR

•

9 pin com port

•

DVR

DQR

•

Download from Www.Somanuals.com. All Manuals Search And Download.

PIN 3, 4, 5, 6 ALARM INPUT

To connect wire from ALARM INPUT (PIN 3, 4, 5, 6) to GND ( PIN 9 ) connector, DVR will start recording and

buzzer will be on. When alarm has been triggered, signal becomes “Low”, and it will stop all alarm activities.

Under normal operation, signal remains “High”.

PIN 7. EXTERNAL ALARM NC

Under normal operation COM connects with NC and disconnects with NO. But when alarm is triggered, COM

disconnect with NC, and connect with NO.

PIN 8. EXTERNAL ALARM NO

Under normal operation, COM will disconnect from NO. But when Alarm is triggered, COM will connect with NO.

PIN 9. GND

GROUND

PIN 12. DISK FULL (OUTPUT)

When the HDD is full, it sends a signal to trigger next DVR recording mode, if you install another DVR. Under

normal operation, the signal remains “High”, but when the disk is full, DVR will send “Low” signal.

PIN 14. ALARM RESET (INPUT)

To connect wire from ALARM RESET ( PIN 14 ) to GND ( PIN 9 ) connector, it can disable ALARM. An external

signal to ALARM RESET ( PIN 14 ) can be used to reset both ALARMOUTPUT signal and DVR’s internal buzzer.

When alarm has been triggered, signal becomes “Low”, and it will stop all alarm activities. Under normal operation,

signal remains “High”.

PIN 15. EXTERNAL ALARM COM

Under normal operation COM connect with NC and disconnect with NO. But when alarm is triggered, COM

disconnects with NC, and connects with NO.

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX #4 – RECORDING SPEED

The Recording Time is different based on Recording Speed, Recording Quality and Recording Mode.

Please refer to the following table. The HDD capability is 250GB.

NTSC SYSTEM

IPS

Best

High

50hr

62hr

100hr

125hr

200hr

187hr

235hr

375hr

468hr

750hr

937hr

1500hr

1875hr

2998hr

MULTIPLEX

Normal

Basic

Best

167hr

48hr

59hr

95hr

333hr

95hr

625hr

178hr

223hr

356hr

1250hr

356hr

445hr

712hr

2498hr

712hr

4996hr

1425hr

1781hr

2848hr

High

118hr

190hr

890hr

QUAD-FIELD

Normal

1425hr

Basic

Best

158hr

24hr

316hr

48hr

594hr

89hr

1187hr

178hr

2373hr

356hr

4746hr

713hr

High

Normal

Basic

30hr

48hr

79hr

59hr

95hr

112hr

178hr

223hr

356hr

594hr

445hr

713hr

890hr

1424hr

2373hr

QUAD-

FRAME

158hr

297hr

1187hr

HDD Type

250 GB

PAL SYSTEM

IPS

Best

High

50hr

62hr

102hr

168hr

48hr

58hr

104hr

131hr

210hr

350hr

98hr

210hr

265hr

422hr

704hr

200hr

251hr

423hr

527hr

844hr

1406hr

400hr

500hr

633hr

792hr

1266hr

2110hr

600hr

752hr

1266hr

1583hr

2542hr

4218hr

1202hr

1503hr

MULTIPLEX

QUAD-FIELD

Normal

Basic

Best

High

124hr

Normal

Basic

Best

98hr

160hr

24hr

200hr

332hr

50hr

400hr

668hr

100hr

800hr

1335hr

200hr

1202hr

2004hr

300hr

2414hr

4005hr

600hr

High

30hr

49hr

62hr

125hr

200hr

250hr

400hr

376hr

601hr

751hr

QUAD-

FRAME

Normal

100hr

1207hr

Basic

80hr

166hr

334hr

667hr

1002hr

2003hr

HDD Type

250 GB

Note: The data above is obtained from actual test of recording normal TV programs.

(For Reference Only)

Download from Www.Somanuals.com. All Manuals Search And Download.

Leica Laser Level 772787 User Manual
Lenovo Computer Drive 42T7993 User Manual
LG Electronics Amplified Phone IP LDK 20 User Manual
Macsense Connectivity Digital Camera SCC B2011P User Manual
Maxtor Computer Drive 10K III User Manual
Maytag Range 8113P768 60 User Manual
Maytag Washer Dryer MAV 35 User Manual
Melissa Styling Iron 635 088 User Manual
Mellerware Hot Beverage Maker 22350A User Manual
Metrologic Instruments PDAs Smartphones SP5700 Series User Manual