Maxtor DVR 16Channel Stand Alone DVR User Manual

VER1.2

16Channel Stand Alone DVR

Audio, USB Backup available

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

CHAP. 1 Features & Package Contents ----------------------------------------------------------------

1-1. Features

----------------------------------------------------------------

1-2. Package Contents

CHAP. 2 Function of Each Button

2-1. Front

2-2. Rear

----------------------------------------------------------------

CHAP. 3 Installation

3-1. Installation Configuration

3-2. Detailed Installation

1) Rack Mount

----------------------------------------------------------------

2) HDD(Hard Disk Drive)

3) Camera

4) Monitor

5) Power

6) SPOT, Video Printer

7) Other External Device

CHAP. 4 Operation

4-1. System Log-in

4-2. Factory Default

4-3. Display Configuration

4-4. Live View Setup

1) Full / Multiple View

2) View in Sequence

3) PIP View

4) Freeze View

5) Zoom View

4-5. Record

4-6. Playback

4-7. Search

----------------------------------------------------------------

4-8. PTZ Camera Operation

4-9. Data Back-Up

4-10. Audio Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

CHAP. 5 Set Up

5-1. Entering the Menu

----------------------------------------------------------------

5-2. Display Setup

1) Screen Display

2) Monitor Setup

5-3. Configuration

1) HDD Management

2) TIME/DATE Setup

3) Camera Setup

4) Interval Setup

5) Alarm Setup

6) Event Popup Setup

7) Buzzer Setup

8) Password Setup

9) System Information

5-4. Record Setup

1) Record Configuration

2) Schedule Setup

3) Holiday Setup

5-5. Back-Up (CDR, USB)

5-6. External Device

1) TCP/IP Setup

2) RS-232C Setup

3) Pan Tilt Zoom Setup

4) Spot Monitor Setup

5) Audio Setup

5-7. Factory Default

5-8. Language Setup

CHAP. 6 Network Setup

6-1. DVR Network Configuration

6-2. Remote Viewer Program

6-3. Back-Up CD Player

CHAP.7 DDNS Web Server

CHAP.8 Specification

CHAP.9 Remocon Key Definition

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 1 Features & Package

Contents

CHAP. 1 Features & Package Contents

1-1. Features

Live View

Real time display per camera

Auto Sequence

PIP (Picture in picture)

Event Popup

Digital Zoom

Display Freeze

Simple Playback mode

Simple PTZ camera control

Record

Variable Record resolution (For higher picture quality or higher recording speed)

Efficient Image Quality setup in 5 steps

Schedule Record / Holiday Record

Event Record (Alarm / Motion)

Emergency Record

Network

View Live and Playback images across IP network

Copy images across the network

Playback

Search & Playback by Date/Time, Event and Camera

Outstanding picture quality by JPEG 2000 compression algorithm (No mosaic effect)

Suitable for recording not only images but also text

Various steps in Forward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)

Various steps in Backward Playback Speed (X1/16, X1/8, X1/4, X1/2, X2, X4, X16, X32, X64)

Easy and convenient search by Jog Shuttle & Remote Controller

Data Back-Up

Simple Back-Up using built-in CD Writer (Back-up CD Player included in the package)

Network Back-Up using Remote Viewer program(Remote Viewer included in the package)

Supports bigger capacity of HDD (300GB or bigger)

USB Device Back-Up available

Others

Multi-Language (English, Spanish, German, French, Italy, Japan, China)

VGA option board supports both TFT LCD monitor and CRT monitor

Lock the system by Password

JOG / SHUTTLE

PAL/NTSC Auto detection

Control the unit by using Remote Controller

Audio recording : IN-4ch, OUT-1ch (mono)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 1 Features & Package Contents

1-2. Package Contents

1. DVR Main Unit

2. Remote Controller

3. Power Cable

6. Software CD

4. Power Adapter

5. User’s Manual

7. Rubber Pad

8. HDD absorber

9. Battery for remote controller

10. Bolts

Package Contents

Description

STAND-ALONE DIGITAL VIDEO RECORDER

DVR control

1. DVR Main Unit

2. Remote Controller

3. Power Cable

4. Power Adapter

5. User’s Manual

6. Software CD

7. Rubber Pad

AC power supply to adapters for 12 V DC power

12 V DC power supply

User’s Manual

Remote Viewer Software & Back up CD player

Prevent DVR from slipping. Attach it to the bottom of main unit

Absorbing the mechanical shock of HDD against the case bottom

Battery for remote controller

8. HDD absorber

9. Battery

10. Rack mount

bracket / Bolts

Rack mount bracket

For fixing Rack Mount bracket to DVR (6ea)

For fixing DVR with Rack Mount bracket to 19” Rack (4ea)

For fixing Hard Disk Drive into DVR (8ea)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 2 Function of Each

Button

CHAP. 2 Function of Each Button

2-1 FRONT

Name

Function

① LED Lamps

②-1 USB HOST

②-2 USB Device

③ IR

Shows status of operation

Back-Up by connecting USB Media to USB HOST

Firmware upgrade by connecting PC with latest firmware to USB port

IR receiver

④ Camera

selection

1. Pressing this button will display a full screen image of that camera

2. Control PTZ camera (Each button is assigned for each PTZ command)

• ON : LIGHT ON

• SET : SET PRESET

• CLEAR : CLEAR PRESET

• GOTO : GOTO PRESET

• AUTO : AUTO SCAN

• F1 : USER 1

PTZ camera

control

• OFF : LIGHT OFF

• OPEN : IRIS OPEN

• CLOSE: IRIS CLOSE

• NEAR : FOCUS NEAR

• FAR : FOCUS FAR

• WIDE : ZOOM IN

• F2 : USER 2

• F3 : USER 3

• TELE : ZOOM OUT

⑤ Record /

REC

STOP

PLAY

Emergency Record at continuous, 60ips, SUPER FINE size

Playback

Stop of Emergency Record and return to Schedule Record

from Emergency Record. Playback stop.

Playback of recorded data on HDD

SEARCH Search recorded data on HDD

⑥ SETUP

Set up for SYSTEM MENU or Use to exit the menu

Press MENU button before powering off the unit.

ENTER

▲▼◀▶

+ -

Selects each menu option

Move to next step

Navigate in the menu

Reduce or increase the option value in the menu

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 2 Function of Each Button

Name

Function

⑦ LIVE View

PTZ

On/Off for PAN/TILT/ZOOM control mode

Control

Press this button first to control PTZ camera connected to

DVR unit via RS-485

ZOOM

FRZ

Zooming an image

Freezing an image

Switch to split display

MODE

MODE button changes screen-division from (to) full screen

to (from) 16-split screen.

PIP

SEQ

Display in PIP (Picture in Picture) mode

Auto camera image sequencing in full screen mode

Lock the key function.

K.LOCK

To unlock, press longer time (for several seconds) and then

input the password.

Q. Play

Play from image recorded 2 minutes ago in forward

direction. (in case recorded in continuous mode).

(Quick Play)

AUDIO

Select audio channel

⑧ Jog Shuttle

J/SHUTTLE

Pressing Jog Shuttle button (Ready for use Jog/Shuttle)

: In playback mode, pressing J. SHUTTLE button make

images frozen.

Control

RUN LED on : While you operate Jog or Shuttle

ACTIVE LED on : When J. SHUTTLE button is pressed

⑨ Jog Shuttle

Very easy and convenient search : Press J. Shuttle button, and images in

playback pause, and then Jog and Shuttle makes it very easy and convenient

to search, forward or backward, fast and slow, as user want.

⑩ CD Recorder

Data Back-up and Firmware Upgrade using built-in CD writer

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 2 Function of Each Button

2-2. REAR

Name

Function

RS 485

Connection with PTZ Camera or other external device using RS 485

interface

RELAY Output

SENSOR Input

VGA

Relay out terminal

Sensor input terminal

Connection to VGA Monitor (CRT type or TFT LCD monitor)

Just in case you purchased DVR with VGA option board fixed on the main

board of DVR, you can connect VGA Monitor to DVR unit.

ETHERNET

RS-232C

Connection to ETHERNET device

Connection to external device as PC using RS-232C to control the DVR

Connection with camera

CAMERA Input

LOOP Output

Camera loop out

MONITOR

Output

Connection with Composite Monitor

SPOT

Connection with additional composite monitor

DC 12V 6.67A Adaptor

DC Power

POWER

SWITCH

Power ON/OFF switch for adapters

To avoid accidental deletion of HDD data, please make sure to press

MENU button and enter into setup menu before powering off the unit.

This takes the unit out of record mode for safe shutdown.

Audio Input

Microphone Input (4ch)

Audio Output

Speaker Output (1ch)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

CHAP.3 Installation

3-1. Installation Configuration

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

3-2. Detailed Installation

1) Rack mount

Remove 4 bolts on each side cap to

install rack mount.

Attach rack mount bracket to DVR.

Attach DVR with rack mount bracket to 19” rack.

2) HDD

HDD fix

Connection of HDD Cable

I/O BOARD

MAIN BOARD

HDD1 HDD2

MAIN BOARD

HDD1

HDD2

CD-RW

)

MASTER

(

1. Connect Main Board and HDD using SATA HDD data cable and HDD power cable.

2. When you use just 1 HDD, install the HDD onto HDD1 location.

3. When you use 2 HDDs, install the first HDD onto HDD1 location and then install the second HDD

onto HDD2 location in order.

4. Stick the HDD absorber (included in package) on the bottom of case and then install the HDD

on top of them by using the bolts (included in package).

5. Screws must be inserted from outside of the case bottom.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

3) Camera

Connect cameras to the camera input on rear panel of DVR marked CAMERA IN.

4) Monitor

VIDEO A

VIDEO B

VIDEO C

OUT

Connect the video output marked MONITOR to Video-In of Main monitor.

5) Power

Connect one DC 12V, 6.67 A Adaptor to the back side of Power Jack for right operation of

2HDDs and CDRW.

Before you turn on the Power switch, be sure all necessary devices such as Power

adaptor, cameras and Monitor are connected properly to DVR!

Notice

To avoid accidental deletion of HDD data, please make sure to press MENU button

before powering off the unit. This takes the unit out of record mode for safe shutdown.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 3 Installation

6) SPOT, VIDEO PRINTER

Connection with additional composite monitor

7) Other External Device

RS-232C : Control DVR through RS-232C port by using PC.

RS-485 : Control external device like PTZ Camera. (Pin No.1 & No.2 at Terminal Block).

RELAY Output : Relay Output. (Pin No.3 ~No.5 at Terminal Block)

SENSOR Input : SENSOR Input (Alarm connection) – (Pin No.6 ~ No.26 at Terminal Block)

ETHERNET : Connection to LAN, WAN, Internet.

VGA : Connection to a VGA monitor(CRT,TFT LCD) if optional VGA board is fixed

on the main board as shown in the following figure.

Resolution set by manufacturer is 800x600 60 Hz, and user can set resolution

in MONITOR SETUP / VGA SETUP / VGA RESOLUTION.

Audio Input : Microphone Input (IN1~IN4)

Audio Output : Speaker Output (OUT)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

4-1. System Log-In

DVR LOG-IN

1) To enter into the setup menu, press the [MENU] button.

2) Enter password with channel number button

from No.1 to No.10 on the front of the DVR unit.

(Maximum of 8 digits are available)

ENTER PASSWORD

_ _ _ _ _ _ _ _

INPUT YOUR OWN PASSWORD

TO EXIT, PRESS [MENU]

3) After inputting the password, press the [ENTER] button.

Administrator :

If the password entered matches previously set password, “ LOGIN ADMIN” message appears and

you can enter into SYSTEM SETUP.

If the password entered does not match previously set password, the DVR unit goes back to live

display mode.

Factory default password is blank. For log-in, just press [MENU] button and then [ENTER] button.

-Factory default password

ADMIN : (Blank)

MANAGER : ‘ 1 ’

USER 1~USER8 : ‘ 2 ’ ~ ’ 9 ’

※ We recommend configuring a unique password as per the procedure in

SYSTEM MENU - CONFIGURATION - PASSWORD SETUP.

※ For security reasons, be sure to make note of your own password.

4-2. Factory Default

Before first operation, you must check first if all connected camera images are displayed properly,

and then login to the SYSTEM MENU. And you also need to set Time/Date, Factory Default, and

then clear HDD. Even though it is brand new one. it is to make DVMR system and HDD ready for

proper operation. Starting recording without FACTORY DEFAULT setting and HDD clear will cause

malfunction.

1. FACTORY DEFAULT

2. HDD CLEAR

HDD MANAGEMENT

TIME/DATE SETUP

CAMERA SETUP

INTERVAL SETUP

ALARM SETUP

DISPLAY SETUP

CONFIGURATION

REOCRD SETUP

BACK-UP

DISPLAY SETUP

CONFIGURATION

REOCRD SETUP

BACK-UP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

EVENT POPUP SETUP

BUZZER SETUP

PASSWORD SETUP

SYSTEM IMFORMATION

Refer to page 34.

Refer to page 21.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 4. Operation

4-3. Display Configuration

HDD Status

ETHERNET status

In live mode : Amount of data recorded

In Playback mode : Amount of data played

Connected

Disconnected

Current Time & Date

PIP

Status of DVR system

Emergency Record (Red)

Schedule Record (Green)

Record Stop (White)

Stop

Forward Playback

Backward Playback

Pause

1/16~1/2x forward playback

1/16~1/2x backward playback

2~4x forward playback

2~4x backward playback

16~64x forward playback

16~64x backward playback

FREEZE

SEQUENCE

ZOOM

AUDIO

ALARM Record

Picture Quality

BASIC

MOTION Record

CONTINUOUS Record

NORMAL

ENHANCED

FINE

LIVE Display

120(100) IPS @ 720x240(720x288)

240(200) IPS @ 360x240(360x288)

480(400) IPS @ 360x120(360x144)

Camera Title

SUPER FINE

4-4. Live View Setup

1) Full / Multiple View

Switch to multi-screen display by pressing [MODE]. For full image display, just press the channel button

which you want or continue to press [MODE] button until you see full screen.

When you playback images which recorded in 360X240(360X288) resolution, only 4,9,13 & 16 split

screens are available.

Full screen

Multiple screen changes

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

2) View in Sequence

Press [SEQ] button. It automatically displays full screen images in sequence.

CH16

●

……

●

CH02

CH01

3) Picture in Picture(PIP View)

When it is in full screen display mode, you can see other camera in a small

window by pressing [PIP].The other camera in small window is rotating in

sequence to next number of camera and you can set the rotating time

interval as per the procedure in SYSTEM MENU-CONFIGURATION-

INTERVAL SETUP.

CAM-01

4) Freeze View

Full display mode : If you press the [FRZ] button, the FRZ icon will be activated on the

screen and “F” character will be shown beside camera title, and

live image will be frozen.

Split display mode : If you press the [FRZ] button, the FRZ icon will be activated on the

screen. press the channel button which you want to freeze.

To release frozen image, press channel number of frozen image again

and press [FRZ] button to exit FRZ mode.

5) Zoom View

In full screen, press the [ZOOM] button and move the Selection Frame using J.SHUTTLE or Direction

keys to the area which you want to enlarge. And then press the [ENTER] button for 2-times enlarged

picture. To exit Zoom mode, just press [ZOOM] button again.

Horizontal Movement : J.SHUTTLE

Vertical Movement : Hold [UP or DOWN] button and turn J/SHUTTLE

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

4-5. Record

Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording.

In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend.

Once you press the [REC] button while you see live view, the record type is changed to Emergency Record mode.

- Emergency Record : at full resolution/in best quality

Record type : CONTINUOUS, SUPER FINE quality,

Emergency Record [RED]

120 (100) ips at 720X240 (720x288)

- Schedule Record

Schedule Record [GREEN]

Record and stop as set (time interval and

record type) in RECORD-SCHEDULE SETUP menu.

- Stop Record

Stop Record [WHITE]

Recording stopped as set in

RECORD-SCHEDULE SETUP menu.

On the screen

- Emergency Record

: Red Record Icon (

- Schedule Record

: Green Record Icon (

- Record Stop

) and Record LED is lit

: White Icon (

) and Record LED is off

- Motion Record, Alarm Record, Alarm+Motion Record

: Record standby LED blinks

: Record LED is lit

※ While in Emergency Record mode, press [STOP],

[PLAY], [MENU], or [SEARCH] button to exit from

Emergency Recording mode and return to Schedule

Record mode.

※ For details, refer to the SYSTEM MENU – RECORD

SETUP (Page 27)

- This DVR unit does not record in following conditions ;

※ While entered in the Menu.

※ No camera is connected

※ Overwriting is off in the Record Setup menu.

4-6. Playback

On record mode or stop mode, press [PLAY] button to play the recorded data in 1x speed.

For backward playback, press [PLAY] button again.

Use Jog/Shuttle to pause and control playback speed. To stop playback, press the [STOP] button.

Using Jog/Shuttle

press the [J.SHUTTLE] button in playback mode. The [ACTIVE] LED will be lit, and Jog/Shuttle is ready

for use. The [RUN] LED will blink whenever you operate the Jog/Shuttle.

For forward playback, turn the Shuttle right and turn Shuttle left for backward playback.

Turn Jog using your index figure to see picture by picture in forward or backward direction.

Operation of Shuttle is as follows.

1/4 x : 4 times slower than normal playback speed

1/2 x : 2 times slower than normal playback speed

1 x : Normal playback speed

2 x : 2 times faster than normal playback speed

4 x : 4 times faster than normal playback speed

16 x : 16 times faster than normal playback speed

64 x : 64 times faster than normal playback speed

Backward Playback 32x supportable.

If you want to keep the playback speed you selected using Shuttle, just hold the shuttle at that location for a few

seconds, and playback in speed you selected continues until you rotate Shuttle again.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

4-7. Search

Press [SEARCH] button, and 3 different methods for searching recorded data are available as shown

in following SEARCH window. For selecting searching method, use direction key or Jog/Shuttle.

After selecting each search method, press [ENTER] button for playback. exit, press [MENU] button.

1) SEARCH BAR

Search by percentage of total recorded data. It starts from image corresponding to set % of data

on the search bar.

2) TIME/DATE

Search by time & date. Playback starts from the time & date selected.

3) EVENT LIST

Search by event list (Motion, Alarm, Video Loss).

SEARCH BAR

[START] 2006/JUN/15 AM11:34:34

[ END ] 2006/JUN/15 PM02:50:45

[TARGET DATE/TIME]

SEARCH BAR

TIME/DATE

EVENT LIST

020 %

SELECT: JOG, SHUTTLE

SEARCH : [ENTER], EXIT : [MENU]

SEARCH BAR page

SELECT MENU : ▲▼, & [ENTER]

SEARCH page

TIME/DATE

EVENT LIST

EVENT

TIME/DATE

001/001

----

---- / - -/ --

-- : -- : --

[START] 2006/JUN/20 AM04:04:12

[ END ] 2006/JUN/20 PM08:12:23

INPUT TIME/DATE

2006/JUN/07 AM04:04:12

SELECT: ▲▼, PAGE:+-

SEARCH : [ENTER], EXIT : [MENU]

SEARCH : [ENTER] , EXIT : [MENU]

TIME/DATE page

EVENT LIST page

4-8. PAN/TILT/ZOOM Camera Operation

Press [PTZ] button first for PTZ control mode. Numeric buttons from 1 to 16 and direction buttons are

assigned for each PTZ command, and user can control PTZ camera connected to DVR unit by

pressing any one of those 20 buttons, one after the other, as needed, and it is just like control by

separate PTZ controller.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 4 Operation

Button

PTZ command

LIGHT ON

Button

PTZ command

1/ON

10/CLEAR

PRESET CLEAR

PRESET GOTO

AUTO SCAN

FUNCTION

TILT UP

2/OFF

LIGHT OFF

IRIS OPEN

IRIS CLOSE

FOCUS NEAR

FOCUS FAR

ZOOM IN

11/GOTO

3/OPEN

4/CLOSE

5/NEAR

6/FAR

12/AUTO

13/F1 ~ 16/F4

UP BUTTON

DOWN BUTTON

LEFT BUTTON

RIGHT BUTTON

TILT DOWN

PAN LEFT

7/WIDE

8/TELE

9/SET

ZOOM OUT

PRESET SET

PAN RIGHT

4-9. Data Back-Up

Enter into SYSTEM MENU-BACKUP-CD-R SETUP.

1) Insert empty CD-R media into CD writer and select the start time & date from which you want to back up.

※ The START & END time / date in HDD sub-menu only shows start and end of recording.

This is not selectable and editable.

※ 700MB on CD-R sub-menu represent size of CD-R media inserted.

2) To set start time of back-up and back-up data size, press the [ENTER] button first on [START] or [SIZE]

sub-menu and adjust using [+] or [-] button and move using [LEFT] and [RIGHT] button for next

change. After setting the time & date and back-up data size, press the [ENTER] button again to exit.

※ End of back-up time will be calculated automatically as per start time & date and the back-up

data size you set.

※ User can select the back-up data size (size of back-up data from start of back-up) on [SIZE] item but

END of back-up time is automatically determined by DVR system.

3) Press [ENTER] button on BURN sub-menu. DVR system starts burning CD.

4) When burning is completed, CD-R media will come out automatically. In the next CD back-up, start

time of CD-R shall be the end time of previous CD-back-up, and you can back-up from that for

continuous data back-up. If you need another backup, repeat the above procedure. To stop backup,

press the [MENU] button.

※ During burning CD, it’s impossible to cancel burning process.

5) User can verify the back-up CD on PC with BACK-UP CD PLAYER (Included in Package).

CD-R SETUP

HDD

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

CD-R

700 MB

CD-R

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[ SIZE ] 700 MB - > 700MB

[ SIZE ]

000MB

BACKUP

CD-RW BURNING : IMAGE DATA.

EXIT : [MENU]

4-10. Audio Operation

Press [AUDIO] button to select audio channel..Ch1, Ch2, Ch3, Ch4 or silence in due sequence.

※Sound of the selected audio channel comes out in Live display.

Recorded sound comes out in Playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-1. Entering into the Menu

Enter into SYSTEM MENU by pressing [MENU] button.

Button

Function

Enter into SYSTEM MENU, Move to previous menu, ESC

ENTER

Selection key, Move to sub-menu, change status (ON or OFF)

Move to next page

Move to upper side

DOWN

LEFT

Move down side

Move to the left

RIGHT

MINUS [-]

PLUS [+]

Jog Shuttle

Move to the right

Decrease the option value

Increase the option value

Jog left turning : Move backward to next image / Decrease value

Jog right turning : Move forward to next image / Increase value

Shuttle left turning : Decrease playback speed / Decrease value

Shuttle right turning : Increase playback speed / Increase value

SYSTEM MENU

RECORD CONFIGURATION

SCREEN DISPLAY

MONITOR SETUP

SCHEDULE SETUP

HOLIDAY SETUP

DISPLAY SETUP

CONFIGURATION

RECORD SETUP

CD-R SETUP

USB SETUP

HDD MANAGEMENT

TIME/DATE SETUP

CAMERA SETUP

INTERVAL SETUP

ALARM SETUP

EVENT POPUP SETUP

BUZZER SETUP

PASSWORD SETUP

SYSTEM INFORMATION

BACK-UP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

ENGLISH

TCP/IP SETUP

RS-232C SETUP

PANTILT SETUP

SPOT MONITOR SETUP

AUDIO SETUP

SELECT MENU : ▲▼, & [ENTER]

SYSTEM MENU

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-2. DISPLAY SETUP

Setting up parameters for monitor and display on screen.

Enter into SYSTEM MENU-DISPLAY SETUP.

DISPLAY SETUP

LIVE

PLAYBACK

SCREEN DISPLAY

MONITOR SETUP

VGA SETUP

COLOR BAR TEST

SELECT MENU : ▲▼, & [ENTER]

1) SCREEN DISPLAY

Setting up the screen display in LIVE mode

and PLAYBACK mode.

Select the sub-menu which you would like to set using

direction buttons and then change ON/OFF with

[ENTER] button.

1. TIME/DATE : Display time & date

2. DVR STATUS : Display system setting status

3. ICON DISPLAY : Display function setting status

4. REC/PLAY BAR : Display record / playback status

5. CAMERA TITLE : Display camera title

2) MONITOR SETUP

VGA SETUP : VGA option card enables to connect TFT LCD monitor or CRT type PC monitor to

DVR unit. To connect TFT LCD monitor or CRT type PC monitor to DVR unit, select

resolution as follows using [+] or [−] button. After setting the below option, press

[ENTER] button then the DVR unit will set VGA resolution automatically.

VGA option card supports following resolution, and choose best resolution that

match TFT LCD monitor or CRT type PC monitor to be connected to DVR unit.

- 640X480 / 60Hz

- 800X600 / 60Hz

- 1024X768 / 60Hz

- 1280X1024 / 60Hz

- 640X480 / 75Hz

- 800X600 / 75Hz

- 1024X768 / 75Hz

- 1280X1024 / 75Hz

※ NOTICE : In the booting process,

DVR unit with VGA option

card takes some seconds

more to set parameters.

COLOR BAR TEST : Adjust color tone of monitor.

(Color bar test is Not available for monitor through VGA)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-3. CONFIGURATION

Various parameters for system can be set in CONFIGURATION menu.

Enter into SYSTEM MENU-CONFIGURATION and press the [ENTER] button.

CONFIGURATION

HDD SETUP

HDD INFORMATION

HDD CHANGE SETUP

CAMERA SETUP

HDD MANAGEMENT

TIME/DATE SETUP

INTERVAL SETUP

ALARM SETUP

EVENT POPUP SETUP

BUZZER SETUP

PASSWORD SETUP

SYSTEM INFORMATION

CAMERA TITLE

CAMERA SETTING

CAMERA ACTIVE SETUP

MOTION SETUP

SELECT MENU : ▲▼, & [ENTER]

1) HDD MANAGEMENT

Enter into SYSTEM MENU-CONFIGURATION-HDD MANAGEMENT and press the [ENTER] button.

(1) HDD SETUP

This page includes information about start and end of recording, location of recorded data, or location

of last playback on HDD. In addition, users can delete all the data on HDD.

HDD SETUP

On the [HDD CLEAR] sub-menu, press the [ENTER]

button to delete all image data on HDD.

STATUS

HDD

DATE/TIME

The system will ask password for verification.

After you clear all data on HDD, status of HDD CLEAR

changes from IN USE to EMPTY.

----------------------------------------------------------------------

BEGIN

RECORD MASTER

PLAY MASTER

MASTER

2005/04/08

12:12:05

2005/04/09

15:09:58

2005/04/08

19:44:31

※ When you clear HDD, event list is deleted, too.

ENTER PASSWORD : ________

INPUT YOUR OWN PASSWORD.

EMPTY

HDD STATUS

HDD CLEAR

IN USE

TO EXIT, PRESS [MENU]

HDD CLEAR [ENTER], EXIT [MENU]

If you selected OVERWRITE in Record Setup, the HDD STATUS presented as OVERWRITE.

HDD INFORMATION

(2) HDD INFORMATION

[MASTER-1]

MODEL

SPEED

SIZE

START

END

Maxtor 6Y080L0

PIO-4

81,964,302,336 BYTES

2005/04/08 12:08:56

2005/04/08 15:07:06

This menu will show the physical information

of HDD in DVR.

[MASTER-2]

MODEL

SPEED

SIZE

START

END

Maxtor 6Y080L0

PIO-4

81,964,302,336 BYTES

2005/04/08 15:08:26

2005/04/08 19:04:53

TO EXIT, PRESS [MENU]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

(3) HDD CHANGE SETUP

Without losing data, user can use HDD from other DVRs, and HDD installed current DVR can be used

to other DVRs.

HDD CHANGE SETUP

SAVE DVR INFO

LOAD DVR INFO

SELECT MENU : ▲▼, & [ENTER]

1) SAVE DVR INFO

Once you press ENTER button on "SAVE DVR INFO" , the DVR information will be saved on HDD.

If the DVR information is saved properly, you can see "NOW CHANGE HDDDISK" message on DVR.

Then power off the DVR and change with new HDD.

※ NOTICE : Be sure to write down the DVR information as like NTSC/PAL, MODEL name, Channel,

HDD location(PORT 1, PORT2). When you want to retrieve the HDD(old), you must do based on this

DVR information.

2) LOAD DVR INFO

"LOAD DVR INFO " : it retrieves recorded HDD from other DVR set.

- HDD retrieval procedure

1. Install HDD with new DVR and power on.

2. Press [STOP] button when the DVR is booting.

(Then, User can see “HDD CHANGE MODE-ON“ message.)

3. It retrieves when user executes “LOAD DVR INFO” in Menu.

Please note that if the HDD conditions are changed between backup and retrieval. There are some

possibilities losing DATA. So, please remember the condition during backup.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

2) TIME/DATE SETUP

TIME/DATE SETUP

Set time and date of DVR system which is very

important for search with time and date of the event.

Time and date set by manufacturer is different from

local time of user, and user must set time and date

exactly in the first operation. Set time & date using

direction buttons and [-][+] button or Jog shuttle

YEAR

MONTH

DAY

2005 / JUN /11

HOUR

MINUTE

SECOND

PM14:06:45

DATE FORMAT

TIME FORMAT

MONTH FORMAT

ASIA

12 HOUR

ENGLISH

2.Change the date, time and month format for

user’s convenient

SELECT : ▲▼, CHANGE VALUE : - +

3) CAMERA SETUP

CAMERA SETUP

CAMERA TITLE SETUP

CAMERA TITLE

CAMERA SETUP

CAMERA ACTIVE SETUP

MOTION SETUP

0123456789 .ABCDEFGHIJKLMNOPQ

RSTUVWXYZ ! #-[ ]*+ -,./ :<=>?@◀▶

CAMERA01

CAMERA02

CAMERA03

CAMERA04

CAMERA05

CAMERA06

CAMERA07

CAMERA08

CAM -1

CAM -2

CAM -3

CAM -4

CAM -5

CAM -6

CAM -7

CAM -8

SELECT MENU : ▲▼, & [ENTER]

[ENTER] SELECT MODE

[▲/▼] select CAMERA

(1) TITLE : Input Title of each camera. Move to channel you want to change using [LEFT] or [RIGHT]

direction button and then change the title using [-] [+] button. When modification is finished,

press the [ENTER] button. To exit to previous menu, press the [MENU] button.

(2) COLOR : Adjust image color

Move to each element using

[UP][DOWN] button and adjust using

[-] [+] button or Jog shuttle.

CAMERA COLOR SETUP

CHANNEL : Select camera

CHANNEL

BRIGHTNESS : Adjust image brightness (-32~ 31)

CONTRAST : Adjust color contrast ( -32 ~ 31)

SATURATION : Adjust color saturation ( -32 ~ 31)

HUE : Adjust color hue ( -32 ~ 31)

BRIGHTNESS

CONTRAST

SATURATION

HUE

CAMERA POSITION

CAMERA POSITION : Adjust camera image

To the center. If value is lower:Left.value is

higher:Right (0~80)

SELECT : ▲▼, CHANGE VALUE : + -

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

CAMERA ACTIVE SETUP

MOTION CONFIGURATION

CHANNEL

STATUS

LIVE

REC

---------------------------------------------------------------------------

SENSITIVITY GRADE

MOTION DISPLAY TYPE

RECORD DURATION

NUMBER OF CELL OT DETECT

ACTIVE

LOSS

ACTIVE

OFF

05 SEC

SELECT ▲▼, CHANGE VALUE : + -

SELECT : ▲▼ ◀▶, & [ENTER]

(3) CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER]

button to select [ON/OFF]. If it is set at LIVE [OFF] and REC [ON], DVR

system records, but does not show live image of set channel.

- STATUS : Shows if image from a specific channel is coming for live display and recording. In normal

camera condition, it is ACTIVE, but LOSS is displayed when the cable is disconnected or

camera is not working.

- LIVE : Decides whether to show LIVE screen image or not.

- REC : Decides whether to record relevant channel or not.

(4) MOTION SETUP: You can set sensitive of motion detection in 4 steps, motion detection area and others

in relation to motion recording in this menu.

(4)-1. MOTION CONFIGURATION

- SENSITIVITY GRADE : Adjusts motion detection sensitivity. (LOW, MEDIUM, HIGH, VERY HIGH)

- MOTION DISPLAY TYPE : Showing cells with motion detected differently from cells with no motion .

- RECORD DURATION : Whenever motion is detected and it is set at Motion Recording mode, DVR

system records for RECORD DURATION from time motion is detected.

(1sec. ~ 99 sec.) (Default duration : 5 sec.)

(4)-2. MOTION MASK SETUP: Set motion detection area. Direction button is for moving and [ENTER]

button is for selection, and [MODE] button is for changing mode of MASK SETUP.

- CELL : Move to the location which you want to detect and then press the [ENTER] button.

Highlighted cell area means motion detection area.

- ALL ON : Set all cells as detection area. Use [ENTER] button to set.

- ALL OFF : Set all cells as no-detection area. Use [ENTER] button to set.

- BLOCK ON : Select detection area by block. Use [MODE] button and press [ENTER] button to set ON.

- BLOCK OFF : Select un-detection area by block. Use [MODE] button and press [ENTER] button to set ON.

Highlighted Area

(Motion Detection Area)

Non-highlighted Area

(No Motion Detection Area)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

INTERVAL SETUP

4) INTERVAL SETUP

SWICHING INTERVAL

FULL SCREEN

01 SEC

PIP SCREEN

Set the switching time interval for SEQ or PIP

function.(1 sec. ~ 99 sec.)

EVENT RECORD

(1)FULL SCREEN : set the sequencing switch time interval

in live full screen.

EVENT UPDATE TIME

01 SEC

(2)PIP SCREEN : set the sequencing switch time interval

of PIP window.

SELECT ▲▼◀▶, CHANGE VALUE : - +

(3)EVENT UPDATE TIME : Set the minimum time interval of event to be listed in EVENT LIST.

If EVENT UPDATE TIME is set at 20 sec, only following event happened

20 sec or more than 20 sec later previous event shall be listed in EVENT LIST.

5) ALARM SETUP

ALARM SETUP

Set type of alarm sensors connected to DVR unit.

N.O represents Normal Open type and N.C Normal

Close type.

CHANNEL

CH1

N.O

005

ALARM INPUT

DURATION

(1) ALARM INPUT : Select type of alarm sensor

connected to DVR unit (N.O or N.C).

Use direction button and [-] [+] button

to set.

N.O ................................ NORMAL OPEN

N.C ................................ NORMAL CLOSE

___ .................................. DISABLE

DISABLE represents not to use alarm

sensor connected to DVR.

(2) DURATION : Set the duration of alarm when an

alarm is activated. (0 sec. ~ 300 sec.)

SELECT : ▲▼, CHANGE VALUE : - +

6) EVENT POPUP SETUP

When event is activated, the full image will pop up

as user set.

EVENT POPUP SETUP

(1)CHANNEL : Choose a channel

CHANNEL

CH01

POPUP ON / OFF

EVENT

(2)POPUP ON/OFF : Set a popup function at ON/OFF

0 3

DURATION

(3)EVENT : Set event mode which ‘popup’ function is

applied to.

*A : ALARM event. M : MOTION event.

(4)DURATION : Set the duration how long the popup

Image is shown.(0 sec. ~ 60 sec.)

※If more than 2 channels pop up at the same time,

the first channel out of them will be shown.

(For e.g. Ch1 and CH3 pop up at the same time,

CH1 will be shown)

SELECT : ▲▼, CHANGE VALUE : - +

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

6) BUZZER SETUP

BUZZER SETUP

Set parameters for buzzer (On or Off).

Use direction button and [ENTER] button.

ALL

KEY BEEP

KEY BEEP : buzz when button is pressed.

VIDEO LOSS

ALARM ACTIVE

MOTION DETECT

VIDEO LOSS : buzz when video signal is lost.

ALARM ACTIVE : buzz when alarm is activated.

MOTION DETECT : buzz when motion is detected.

User can set all buzzers at On/Off at once

by set ALL at ON/OFF.

SELECT : ▲▼, & [ENTER]

7) PASSWORD SETUP

Set user ID and password.

-Use [UP] and [DOWN] button to move to option

and [LEFT] and [RIGHT] button to set user ID.

PASSWORD SETUP

The password must be consist of 1 to 8 digit

number. Just use numbers button from 1 to 10

on the front panel of DVR unit.

USER I D

USER PW

NEW PW

CONFIRM

ADMIN

---------------------

-To change password, user must input current

password and then input new password.

And input again new password to confirm.

- Default value

ADMIN : ‘ ‘ (Blank)

MANAGER : ‘1’

USER 1 : ‘2”

[K1-K10] INPUT PASSWORD

[ENTER] CHANGE PASSWORD

TO EXIT, PRESS [MENU]

USER 8 : ‘9’

※ Change the user PASSWORD in the first operation is recommended.

※ In case you forgot PASSWORD, contact dealer of DVR to get instruction to enter into menu to

set new PASSWORD.

8) SYSTEM INFORMATION

SYSTEM INFORMATION

S/W VERSION VER 1.0

H/W VERSION REV-B. / ES518

PRODUCT ID

DVR system information including firmware

version, hardware version, product ID, etc….

01S-2039-001008-AR-01

MASTER-1

WDC WD2000JS-00NCB1

MASTER-2

WDC WD2000JS-00NCB1

CD-R

SAMSUNG CD-R/RW SW-256B

TO EXIT, PRESS [MENU]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-4. RECORD SETUP

This is the most important configuration of the DVR.

RECORD SETUP

Enter into SYSTEM MENU-RECORD SETUP

and press the [ENTER] button.

RECORD CONFIGURATION

SCHEDULE SETUP

HOLIDAY SETUP

1) RECORD CONFIGURATION

Use direction button to move and [-] [+] button to set value.

(1) OVERWRITE : Set overwrite or stop recording when

the HDD is full.

(2) MULTIPLEX

- DUPLEX : Playback & Ethernet

- TRIPLEX : Playback & Recording & Ethernet

SELECT MENU : ▲▼, & [ENTER]

※ Note: DUPLEX MODE is recommended to playback

the images at a maximum frame rate.

But, it makes DVR not to record during search.

RECORD CONFIGURATION

(3) QUALITY : Set recording picture quality.

Actually it is fixing maximum data size of

image for each picture quality in 5 steps

as follows.

OVERWRITE

MULTIPLEX

TRIPLEX

ENHANCED

120IPS 720*240

1/1X

QUALITY

BASIC

RESOLUTION

- NORMAL

- ENHANCED

- FINE

RECORD IN ALARM

RECORD IN MOTION

CONTINUOUS RECORD

1/1X

- SUPER FINE: Default quality set by manufacturer

In Emergency recording mode, recording quality is

SUPER FINE.

SELECT MENU : ▲▼, CHANGE VALUE : + -

To send more images via IP network and longer recording

time, set QUALITY at NORMAL or ENHANCED and

record at 360x240(360x288).

※ Data size of image in PAL system is a little bigger than NTSC system, but the total recording time

is same as in NTSC system.

(4) RESOLUTION : Set recording resolution.

- 120 ips at 720x240(NTSC) , 100 ips at 720x288(PAL)

- 240 ips at 360x240(NTSC) , 200 ips at 360x288(PAL)

- 480 ips at 360x120(NTSC) , 400 ips at 360x144(PAL)

※ It is not possible to see those images in full screen mode in playback.

Recording in Dual resolution is recommended for higher recoding speed, and also to send

more images via IP network.

(5) RECORD IN ALARM : Set record speed (skip rate) in ALARM record mode.

(6) RECORD IN MOTION : Set record speed (skip rate) in MOTION record mode.

(7) CONTINUOUS RECORD : Set record speed (skip rate) in CONTINUOUS record mode.

Set record speed (skip rate)

- 1/1x, 1/2x, ………. 1/999x record speed

- ex: 1/2x ) R->S->R->S…

- ex: 1/3x ) R->S->S->R->S->S->R…

- ex: 1/4x ) R->S->S->S->R->S->S… ( R : RECORD S : SKIP )

- ex : If record resolution is set at 360x240, 1/1x = 240 ips, 1/2x = 120 ips, 1/3x = 80 ips, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

2) SCHEDULE SETUP

Unless you selected other recording mode, DVR system records in Schedule Recording mode.

In SCHEDULE REC SETUP, you set type of recording for every time interval of 2 hours in each day of

the week. Schedule Recording set by manufacturer is recording continuously at its full recording

speed, and it means DVR system record continuously at 60 ips in total at 720x240 resolution.

To set Schedule Recording parameters, enter into SYSTEM MENU-RECORD SETUP-SCHEDULE SETUP

and Press the [ENTER] button.

(1) SCHEDULE SETUP

Set recording type for each recording time interval for a day of the week (2 hours interval).

SCHEDULE REC SETUP

SUN MON TUE WED THU FRI SAT

Use [MODE] button to select edit type and move to

00-02

02-04

04-06

06-08

08-10

10-12

-M- AM - - -C - -C- - -C- - -C - -C

-M - AM - - -C - - C - - C - -C - - C

- M - AM- - -C - - C - - C - -C - - C

-M - AM- -- C -- C - - C -- C -- C

- - - AM- - -C- - - C - - C - -C - - C

-- - AM- - - C - - C - - C - -C -- C

the time interval of a day of the week you want to change.

Press [ENTER] button to select and use [+] or [−] button,

to change the record type. To go next page, use [NEXT]

button.

※ MODE (Edit type)

TIME CELL : Set each time interval of a day of the week

WEEK : Set a day of the week at once

TIME ZONE : Set a time slot at once

ALL : Set page by page at once

MODE: CELL BY CELL

▲▼◀▶ & [NEXT], EDIT:+ -&[MODE]

A:ALARM M:MOTION C:CONTINUES

1 / 2

CLEAR ALL: Clear page by page

※ Unless user press [REC] button to record at full resolution and in SUPER FINE picture quality,

DVR system records in SCHEDULE Record mode.

※ DEFAULT record mode for each time interval of a day of the week set by manufacturer is

CONTINUOUS recording.

※ Record type :

After power on

Exit from menu

Schedule record

End of search or playback

After pressing [STOP] button

After pressing [REC] button

Schedule record

Emergency record (Continuous recording in full performance)

[120(100) ips at 720x240(720x288)]

3) HOLIDAY SETUP

HOLIDAY SETUP

Users can set national holiday or holidays on

calendar to record just as setting for Sunday in

SCHEDULE REC SETUP.

< APR >

000/100

SUN MON TUE WED THU FRI SAT

Use [MODE] button to select a month and direction

button to move to a day, and press [ENTER] button to

set a holiday. Then color of date shall be changed to

red, as Sunday.

EDIT HOLIDAY : Set as holiday

CLEAR MON DATA : Cancel the holiday set per month

CLEAR ALL DATA : Cancel all holiday set

MODE : EDIT HOLIDAY

SELECT ▲▼◀▶, EDIT [ENTER]&[MODE]

※ The maximum holidays is 100 days.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-5. BACK-UP

1) CD-R SETUP

User can back up the recorded data to CD using CD writer installed in DVR.

Refer to [START] and [END] of data on HDD and set copy from time, [START], and size of data

copied, [SIZE], and move to BURN and press [ENTER] button to start copy.

CD-R SETUP

HDD

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

CD-R

700 MB

CD-R

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[ SIZE ] 700 MB - > 700MB

[ SIZE ]

000MB

BURN

CD-RW BURNING : IMAGE DATA.

SELECT : SETUP BUTTON, JOG SHUTTLE

System Status Messages :

- CD-RW DOOR CLOSE. CHECKING CD-R : Blank CD check

- INPUT BLANK CD : CD writer has no blank CD.

- CD-RW DOOR OPEN : Open CD-RW and insert blank CD –R media into CD drive.

- CD-R MEDIA IS DETECTED : Blank CD-R media has been inserted and detected. DVR system will

display size of blank CD-R.

After you set [START] time and [SIZE] in CD-R sub-menu and then select BURN, DVR system starts

copying images to CD and shows following message.

CD-RW BURINING START

CD-RW BURNING : LEAD-IN

CD-RW BURNING : IMAGE DATA

CD-RW BURING : CLOSE TRACK

CD-RW DOOR OPEN

When burning is completed, CD-R media will be ejected automatically.

To copy more images, repeat above process. In the next back-up process, [START] time in

CD-R sub-menu shall be [END] time in previous back-up, and you can copy images in series

to many CDs as many as you want.

※ SIZE Change

+ , - : Change per 10MB unit

LEFT , RIGHT : Change per 100MB unit

2) USB SETUP

User can back up the recorded data to USB Media using USB (HOST) port on front panel of DVR.

Refer to [START] and [END] of data on HDD and set start and end time of data to USB Media

( USB Memory Stick ). Select backup file size, and move to BACKUP and press [ENTER] Button

to start copy.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

Partition can be selectable by Ch button 1~4.

USB SETUP

HDD

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

USB MEDIA

[START] 2005/AUG/07 AM04:04:12

USB MEDIA

118M , 28M , P:1

[START] 2005/AUG/07 AM04:04:12

[ END ] 2005/AUG/08 PM08:12:23

[ SIZE ] 28 MB - > 28MB

[ END ] 2005/AUG/08 PM08:12:23

[ SIZE ] 00000MB

BACKUP

Status message

BACKUP

USB STORAGE IS CHECKING…

START WRITING IN USB STORAGE

EXIT : [MENU]

System Status Messages

(1) If USB MEMORY STICK is not inserted :

- USB STORAGE IS CHECKING…

- USB STORAGE IS NOT AVAILABLE

- RE-CONNECT THE USB STORAGE

- CONECT THE OTHER USB STORAGE

(2) When USB MEMORY STICK is recognized

- USB STORAGE IS CHECKING …

- THERE IS A FREE SPACE ON STORAGE

- USB STORAGE IS AVAILABLE

SIZE , FREE SPACE, PARTITION

(3) During Back-Up

- CHANGE WRITE PROTECT MODE (Only WRITE PROTECT is caught, it can be seen)

- START WRITING IN USB STORAGE

- FINISH WRITING IN USB STORAGE

(4) Error Message

- THERE IS A PROBLEM ON USB PORT (If USB PORT fails to work properly)

- USB STORAGE IS FULL (When USB is full)

- FILE SYSTEM IS NOT SUPPORTED (If File System is not supported)

- SIZE IS LARGER THAN FREE SIZE (If back-up size is larger than free space)

※ Back-Up procedure is the same as CDR Back-Up.

※ If Back-Up size is larger than 2GB, it creates several files. (It saves by 2GB).

5-6. EXTERNAL DEVICE

Set parameters of external devices connected to DVR, like Ethernet, PTZ camera, RS-232C, etc.

Use direction button to move to sub-menu and Press [ENTER] button to set.

IP CONFIG SETUP

1) TCP/IP SETUP

MAC ADDRESS

IP ADDRESS

IP PORT

_ _ _ _ _ _ _ _ _ _ _

TCP/IP function enables user to see live pictures and

recorded pictures via the internet.

00-0A-A2-00-00-00

_ _ _ _ _ _ _ _ _ _ _

192.168.001.160

_ _ _ _ _ _ _ _ _ _ _

50000

(1) IP CONFIG SETUP :

Show the network information assigned to the DVR

unit. If the DHCP setup status is AUTOMATIC, user

can set the IP port only and if the DHCP setup status

is MANUAL, user must set all parameters.

For detail procedure of Remote viewer program

installation, refer to CHAP. 6 Software

GATEWAY

_ _ _ _ _ _ _ _ _ _ _

192.168.001.001

_ _ _ _ _ _ _ _ _ _ _

255.255.255.000

SUBNET MASK

DHCP SETUP

program.(Remote viewer software).

AUTOMATIC

SELECT MENU : ▲▼, & [ENTER]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

(2) DDNS SETUP :

- DDNS ON/OFF : Select if DDNS Function use

DDNS SETUP

DDNS ON/OFF

DDNS SERVER

INTERVAL

OFF

211.062.253.087

D-00 H-00 M-20

- DDNS SERVERS : IP Address of DDNS SERVER.

- INTERVAL : Registered time period to DDNS SERVER.

Per D(Day) H(Hour) M(Minute)

- REGISTER : Once press [ENTER],

It automatically registered.

- DDNS STATUS : present current status by

"REGISTER OK“

"REGISTER ERROR", "NOT REGISTER"

--------------------------------------------------------------------------

DDNS STATUS

IP ADDRESS

---.---.---.---.---

-----

IP PORT

REMAIN TIME

D-00 H-00 M-00

LAST REGISTERATION DATE

- IP ADDRESS : IP of last registered DVR

- IP PORT : Port of last registered DVR

- REMAIN TIME : Remain time to next registration

SELECT MENU : ▲▼, & [ENTER]

- LAST REG... DATA : Last registered time

(3) CONNECTION SETUP :

- TIME OUT :

CONNECTION SETUP

Adjust TIMEOUT value properly to

successfully access to DVMR unit via Internet

line. If data transmission speed is high enough,

leave TIMEOUT value as set by manufacturer

(200 msec), and increase it if data ansmission

via Internet line is relatively slow. Execute

tracert (Tracing Route) in your PC for IP

assigned to DVMR unit, and you can figure

out how much TIMEOUT value increased.

- RETRY COUNT :

TIMEOUT

200 MSEC

RETRY COUNT

Set the retry number of times for network

connection.

SELECT MENU : ▲▼, & [ENTER]

(4) DHCP SETUP :

- DHCP MODE : If user selects AUTOMATIC,

IP automatically assigned.

DHCP SETUP

DHCP MODE

AUTOMATAIC

If user selects MANUAL, in IP CONFIG SETUP

User selects it manually.

DNS SERVER

IP ADDRESS

SUBNET MASK

GATEWAY

168.126.063.001

192.168.001.086

255.255.255.000

192.168.001.001

- DETECT IP : It only appears for AUTOMATIC.

Once press [ENTER], it automatically starts IP

Assignment.

SELECT : ▲▼, CHANGE VALUE : + -

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

(5) EVENT SERVER SETUP :

IP ADDRESS : IP Address of PC that executes

EVENT SERVER PROGRAM.

EVENT SERVER SETUP

IP PORT : PORT of PC that executes

EVENT SERVER PROGRAM

EVENT SERVER TYPE :

It is the way to transmit data to SERVER

By "OFF", "EVENT", "MINUTE“,

In case Event happens from DVR.

IP ADDRESS

192.168.001.072

09988

IP PORT

EVENT SERVER TYPE

INTERVAL

OFF

---

EVENT GMT TYPE

GMT+00:00

"EVENT“: It transmits by the number of EVENT.

"MINUTE“: It transmits each scheduled time.

SELECT : ▲▼, CHANGE VALUE : + -

INTERVAL: If EVENT SERVER TYPE is "EVENT"

User can select from 1~512.

If EVENT SERVER TYPE is "MINUTE“, User can select from 1 ~ 60 mins.

EVENT GMT TYPE : User can set currently installed location(DVR) of GMT.

RS-232C SETUP

2) RS-232C SETUP

SPEED

115200

User can control the DVR via RS-232C port.

Connect DVR to PC via RS-232C port and control

DVR using keyboard of PC.

This function is mainly for programmer who

wants to control DVR as part of many devices

connected to PC system, as in SI project.

LENGTH

STOP BIT

PARITY

NONE

SELECT : ▲▼, CHANGE VALUE : + -

3) PANTILT SETUP

It is to set parameters for PTZ camera connected to DVR unit. DVR unit already includes all

protocols of well-known PTZ cameras like PELCO D type PTZ camera, and user just select MODEL

and set other parameters to control this PTZ cameras, using operation buttons on the front panel of

DVR.

PANTILT SETUP

COMMAND SETTING

CHANNEL

MODEL

PTZ ID

PELCO-D

000

BAUDRATE

CMD DELAY

2400 BPS

1 MSEC

COMMAND SETTING

SPEED SETTING

ꢀ PTZ camera set

ꢀ PTZ speed set

COMMAND

LENGTH

CODE

PAN/TILT STOP

FF 00 00 00

00 00 00 00

SELECT : ▲▼, & [ENTER]

SELECT : ▲▼, CHANGE VALUE : + -

(1) CHANNEL : Select channel

(2) MODEL : Select camera model (protocol type) per each channel

(3) PTZ ID : Select ID

(4) BAUDRATE : Select data transmission speed

(5) CMD DELAY : Select command delay time

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

4) SPOT MONITOR SETUP

(1) SWITCHING INTERVAL

SPOT MONITOR SETUP

Channel switching time (01 sec. ~ 99 sec.)

SWITCH INTERVAL

ALARM POP UP

MOTION POP UP

03 SEC

01 SEC

(2) ALARM POP-UP

When ALARM is detected, the image of channel

connected with Alarm sensor pops up.

Set ALARM detection pop-up (ON/OFF)

EVENT POP UP DURATION

(3) MOTION POP-UP

Set MOTION detection pop-up (ON/OFF)

SELECT: ▲▼, CHANGE VALUE : + -

※

EVENT POP-UP DURATION

Set EVENT POP-UP DURATION

If events (MOTION or ALARM) happen on several channel at the same time, channel No. 1 has the

first priority to pop up. For example, if events happen on channel No. 1, channel No. 2, and channel

No. 4 at the same time, channel No. 1 pops up. If the motion disappears on channel No. 1, then channel

No. 2 pops up for the duration that you set. However, even though motion happens on channel No. 1

again within the duration, channel No. 2 still displays. If motion on channel No.1 keeps on going even after

the duration, channel No. 1 pops up again.

5) AUDIO SETUP

Use direction button to move to channel and Press [ENTER] button to set (ON/ OFF).

AUDIO SETUP

1) REC

(1) ON : Record images with AUDIO

REC

PLAY

(2) OFF : Record images without AUDIO

2) PLAY

(1) ON : Recorded sound comes out during

playback

(2) OFF : Recorded images only play back

SELECT: ▲▼◀▶, & [ENTER]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 5 Set Up

5-7. FACTORY DEFAULT

FACTORY DEFAULT

ALL

OFF

Set the all system parameters as manufacturer first

set before delivery. It is a kind of system

initialization, and manufacturer recommends to do it

when you add new HDD or other changes in

system to make all system ready for normal

operation.

Use direction button to move and Press [ENTER]

button to change parameters. After move to RUN,

Press [ENTER] button for actual Factory Default

setting.

SCREEN DISPLAY

CAMERA SETTING

MOTION SETUP

PANTILT SERUP

SCHEDULE SETUP

CONFIGURATION

RUN

SELECT MENU : ▲ ▼, & [ENTER]

5-8. LANGUAGE SETUP

The menu can be displayed in a number of languages.

Press [ENTER] button to select your language.

SYSTEM MENU

DISPLAY SETUP

CONFIGURATION

RECORD SETUP

EXTERNAL DEVICE

FACTORY DEFAULT

LANGUAGE

ENGLISH

SELECT MENU : ▲▼, & [ENTER]

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

6-1. DVR Network Configuration

Please call your provider to identify what type of service they are providing you.

You will need to know following ;

Upload speed – For your own knowledge for expected frame rates

Download speed – For your own knowledge for expected frame rates

Addressing – For determining what scenario you should follow

Router On Site or Just a Modem – For determining what scenario you should follow

※NOTE : If your provider is using PPPOE (usually DSL providers), you MUST have a IP Share

installed on site and follow 3) Dynamic IP of PPPOE (DSL) for DVR setup and access.

※PLEASE verify Internet access after installing any new equipment (routers, switches, modems, etc.).

PC’s TCP/IP Setting

Before configuring the DVR, please fill out the information below if applicable ;

Choose any PC on your network and determine its TCP/IP settings;

IP Address :

(ex.192.168.1.5)

(ex. 255.255.255.0)

(ex.192.168.1.1)

Subnet Mask :

Default Gateway :

Next pages are several network scenarios. Please identify which scenario your current network

falls within and follow the instructions for configuring and accessing your DVR via TCP/IP.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

1) Static IP

User input IP address in IP CONFIG SETUP which is assigned from ISP company.

1. Verify if IP address is OK or not with PC before connecting DVR.

2. Connect LAN cable to DVR after confirmation.

3. DVR : MENU ꢁ EXTERNAL DEVICE ꢁ TCP/IP

4. Set DHCP to MANUAL and go into TCP/IP SETUP.

5. Verify if MAC ADDRESS starts from 00-0A-A2….

6. Input IP address which is assigned from ISP company.

7. Set IP PORT. (50000 recommended)

8. Input GATEWAY which is assigned from ISP company.

9. Input SUBNET MASK which is assigned from ISP company.

10. Go out of MENU SETUP.

11. Turn off and on Modem (Router) which is provided by ISP company.

ꢁ This is to reset client of MAC from ISP company.

User have to wait for 30 seconds after turning on.

12. Access DVR with Remote Viewer software.

Internet (Static IP)

Remote Viewer

(Client)

DVMR

(Server)

* If user fail to access, please verify 1, 6, 7, 8, 9, 11 again.

* When speed is too slow and connection fails after access : MENU ꢁ EXTERNAL

DEVICE ꢁ TCP/IP SETUP ꢁ CONNECTION SETUP

Increase value of Timeout to find the most suitable speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

2) Dynamic IP

1. Verify if IP address is OK or not with PC before connecting DVR.

2. Connect LAN cable to DVR after confirmation.

3. Turn off and on Modem (Router) which is provided by ISP company.

ꢁ This is to reset client of MAC from ISP company.

User have to wait for 30 seconds after turning on.

4. Turn off and on DVR.

5. DVR : MENU ꢁ EXTERNAL DEVICE ꢁ TCP/IP

6. Verify if MAC ADDRESS starts from 00-0A-A2….

7. Set DHCP to AUTOMATIC and detect IP to get Dynamic IP.

8. Go out of MENU SETUP after getting IP successfully.

9. Access DVR with Remote Viewer software.

Internet

LAN

Remote Viewer

(Client)

Cable Modem

(Dynamic IP)

DVMR

(Server)

* If user fail to access, please verify 1, 3, 4 again.

* When speed is too slow and connection fails after access : MENU ꢁ EXTERNAL

DEVICE ꢁ TCP/IP SETUP ꢁ CONNECTION SETUP

Increase value of Timeout to find the most suitable speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

3) Dynamic IP of PPPoE (DSL)

DVR doesn’t support DSL (PPPoE), user have to set NETWORK with IP SHARE if

user need to access DVR remotely. At this time, User have to port forward on DVR.

Please contact IP SHARE Manufacturer if you need to know how to forward port.

Even though user have Static/Dynamic IP, if user want to use another device

(PC) through IP SHARE, user can set NETWORK as follows,

1. Verify if IP address is OK or not with PC before connecting DVR.

2. Connect Router (IP SHARE) to DSL modem as shown the following picture.

3. Set the internet connection on Router (IP SHARE). (Refer to the Router Manual.)

4. Verify if sub-group of network in Router is OK or not.

5. Connect DVR to Router.

6. DVR : MENU ꢁ EXTERNAL DEVICE ꢁ TCP/IP

7. Set DHCP to MANUAL and go into TCP/IP SETUP.

8. Verify if MAC ADDRESS starts from 00-0A-A2….

9. Input internal IP address which user assigned from Router.

10. Set IP PORT. (50000 recommended)

11. Input GATEWAY of Router.

12. Input SUBNET MASK of Router.

13. Go out of MENU SETUP.

14. Forward port from Router. (Refer to the Router Manual.)

15. Access DVR with external IP and Port (Port forwarded).

* If Router support DDNS, user can access Remote Viewer using Domain Information.

Router

or Gateway

(IP Share)

Internet

LAN

Remote Viewer

(Client)

DSL Modem

(Dynamic IP)

DVMR

(Server)

* If user fail to access, please verify 1, 4, 15 again.

* When speed is too slow and connection fails after access : MENU ꢁ EXTERNAL

DEVICE ꢁ TCP/IP SETUP ꢁ CONNECTION SETUP

Increase value of Timeout to find the most suitable speed.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

6-2. Remote Viewer program

MAIN INTERFACE

①

②

- Power button : Press the Power switch to exit the program. Please disconnect the live feed before

powering off the software

- Connect button : Press the Connect button to view the live images from the DVR. These are the same

images being displayed on the monitor of the DVR, with a delay depending on your

internet connection at both the DVR location and from where you’re currently accessing.

③

④

- Disconnect button : Press this button to disconnect from the DVR unit. Then you may power off the

software.

- Screen Division button : Select how many channels to view simultaneously(single,4-split,9-split,

or 16-split). When you select a view you will see the Channel Numbers highlighted

which determine what channels are currently being viewed.

⑤

⑥

⑦

- Channel number button : Select the channel that you want to view based on what Screen Division

view is enabled.

- Status window : Display’s the current time and date based. The date is in the format : Year/Month/Day.

You will also see the status of your connection.

- Setting, Playback, and Sequence buttons ; a. Setting : Enables the software configuration screen.

b. Playback : Enables the remote playback screen.

c. Sequence : When in single channel view, hitting the sequence button will sequence

through all active channels at a speed specified in the settings menu.

⑧

- PTZ control : You can control a PTZ camera via the software with these controls.

a. First, you must input or configure the specific PTZ protocol into the software in

order to communicate with the PTZ device.

b. When you press any of the controls for the PTZ, please press and hold the button

for 1-2 seconds per instance to compensate for the data transmission rate. If you

do not and instead simply click the PTZ buttons, you may get undesired results

(having the requested operation transmitted repeatedly, regardless of your intention).

c. The plus and minus buttons send the PTZ commands to the corresponding PTZ

camera ID.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

IP/PORT Setting Screen

IP List

MANUAL

DDNS

Input IP address and PORT manually

Receive IP address and PORT from DDNS Server.

For further information of DDNS, please contact your vendor.

Name

Name of IP address on the list.

Address

PORT

Input IP address which is set on DVR

Input PORT which is set on DVR

Input ID which is set on DVR. (Please input ‘admin’.)

Input password which is set on DVR

Password

IP List

It shows IP list which user input manually.

Select Button Select IP and PORT on the list.

Save Button Save IP and PORT on the list.

Delete Button Delete IP and PORT on the list.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

PTZ/SAVE Setting Screen

Circular Monitoring Interval : This indicates the speed of the channels sequence when the

SEQUENCE button is used from the main interface.

Scan Rate

PTZ TYPE

: Set speed of playback.

: Select PTZ camera which is connected to DVR.

PTZ Baud Rate : Enter the Baud Rate of your PTZ camera.

Set Path to Save Downloaded image : Determines the location and folder on your PC where the

downloaded video clips are stored.

Run in full screen mode : When checked, this will enable the program to re-adjust the interface to

completely fill your computer screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

PLAYBACK INTERFACE through Remote Viewer

Function of each button in Search window.

①

②

③

④

⑤

⑥

Exit : Exit to live window.

Full screen : Select a certain camera to view in full screen.

Quad : To view quad mode (4 channels at the same time)

Time : The recording time & date information of the pictures which is being played.

Channel selection : Select each camera.

Time selection : Select a time from which user want to see. The playback will be started from this

point.(drag the point using mouse)

⑦

⑧

Start and end time : Indicate record starting time and end time of images on HDD

Other operating button : Refer to the next page description.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Network Setup

: Play fast backward

: Play backward(1X)

: Move to the start of recording

: Move to the previous hour

: Move to the afterward hour

: Move to the end of recording

: Play forward(1X)

: Play fast forward

: Stop playback

⑨

Command button.

a) SAVE : After pressing the Stop button, click SAVE button to save the currently viewed image in jpg

format.

b) PRINT : After pressing the Stop button, click PRINT button to print the currently viewed image.

c) RECORD : Press this button to download playback images transmitted from DVR unit into your

PC. User can see saved images using Windows Media Player.

⑩

Calendar

Use this to select the date you wish to search. The filled in square outlines the date that is at the

beginning of the hard drives. The outlined square indicates the data at the end of the hard drives.

Select the date you wish to view. Verify a filled in square for that particular date. If an invalid date is

selected it will default to the beginning of the hard drive(s).

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Back-up CD Player

6-3. Back-up CD Player

DVR units are with a built-in CD-RW, and user can copy images to CD.

Using back-up CD player, user can see images on back-up CD, and function of each button in

Back-up CD player is as below.

①

②

Time : Current time.

Status Window : Start & End of time & date, Status of operating button.

When user play forward/backward, recorded time will appear.

③

④

Play Speed button : User can adjust play speed by pressing up/down button.

Speed (1/4X, 1/2X, 1X, 2X, 4X, 8X, 16X) Delay : (1, 2, 4, 8, 16, 32)

Operation button : User can search recorded data using these buttons.

a) Move the slide bar to start position

b) Play fast backward in preset speed

c) Play backward at 1x speed

d) Pause

e) Play forward at 1x speed

f ) Play fast forward in preset speed

g) Move the slide bar to end position

⑤

Function button

a) OPEN : Open the Back-up CD Player.

b) EDIT : User can edit, save and print recorded image on Edit mode. This edit button will work

when you selected one of 16 cameras.

c) EXIT : Exit from Back-up CD Player.

⑥

Channel button : Select channel to see pictures in full screen.

⑦

⑧

Slide Bar : Move to a point from which user want to see.

Page button : This button is just working when screen-division is 4-split in 8 ch DVR, or 4-split or

8-split in 16 ch DVR. Moves to next page.

⑨

Screen division : 1/4/9/16

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 6 Back-up CD Player

⑩ When you open the file, audio menu OSD will come up automatically.

- on : check to output recorded sound, then choose the audio channel 1,2,3 or 4

- skip : skip images forward.

* During playback, you can control

* During playback, only one channel is displayed and can not be changed to multi or full screen.

Image EDIT

only.

Contrast

Sharpness

Blur

Brightness

Save Print Exit

①

②

Image Edit Status Window : Shows record time & date, Image size, Command status.

Edit Button : User can adjust color tone of copied images using this button.

- Contrast :

a) make bright part of image brighter and dark part of image darker

b) To reduce light and shade, lower contrast a little

- Brightness

a) make an image brighter

b) make an image darker

- Sharpness : give sharp-edge effect

- Blur : make an image soft

③

Function button

a) Save : User can save an image in JPEG format. It is saved in the folder where you installed

back-up CD player.

b) Print : User can print current image user selected

c) EXIT : Return to Back-up CD Player mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

CHAP. 7 DDNS Web Server

* Register DVR for DDNS Web-server and set DVR as shown below,

7-1. Registering DVR for DDNS (DDNS Web-server)

1) Please access www.j2kip.com and Register Member ID.

2) Please click DVR Add to register DVR.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

3) Please click confirm after inputting DVR Name & Mac Address.

4) Now, DVR is listed on DDNS Web Server without IP and Port number.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

7-2. DDNS Set Up in DVR

* The following setting is a sample for a cable modem connected to DVR directly.

1) Click Menu and Enter into ‘LOGIN -> EXTERNAL DEVICE -> TCP/IP SETUP’

2) Go to IP Config Setup, if user set DHCP ‘Automatic’, it detects IP address automatically.

IP CONFIG SETUP

MAC ADDRESS

IP ADDRESS

IP PORT

_ _ _ _ _ _ _ _ _ _ _

00-0A-A2-00-00-00

_ _ _ _ _ _ _ _ _ _ _

192.168.001.160

_ _ _ _ _ _ _ _ _ _ _

50000

GATEWAY

_ _ _ _ _ _ _ _ _ _ _

192.168.001.001

_ _ _ _ _ _ _ _ _ _ _

255.255.255.000

SUBNET MASK

DHCP SETUP

AUTOMATIC

SELECT MENU : ▲▼, & [ENTER]

3) Go to the previous menu and enter into DDNS Setup.

TCP/IP SETUP

IP CONFIG SETUP

DDNS SETUP

CONNECTION SETUP

DHCP SETUP

EVENT SERVER SETUP

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

4) Set DDNS ON/OFF “ON”.

IP address which is assigned from DHCP Server is automatically input on DNS Server.

DDNS SETUP

DDNS ON/OFF

DDNS SERVER

INTERVAL

OFF

211.062.253.087

D-00 H-00 M-20

--------------------------------------------------------------------------

DDNS STATUS

IP ADDRESS

IP PORT

---.---.---.---

-----

REMAIN TIME

D-00 H-00 M-00

LAST REGISTERATION DATE

SELECT : ▲▼, CHANGE VALUE : + -

5) Go down to REGISTER and push ENTER button to renew IP and Port resistered on DDNS

Sever(www.j2kip.com)

( Interval : connection interval time between DVR and DDNS Server)

D = Day, H = Hour, M = Minute

DDNS SETUP

DDNS ON/OFF

DDNS SERVER

INTERVAL

211.062.253.087

D-00 H-00 M-20

--------------------------------------------------------------------------

DDNS STATUS

IP ADDRESS

192.168.001.160

5000

IP PORT

REMAIN TIME

D-00 H-00 M-20

LAST REGISTERATION DATE

> WED. 12 JUL

2006 09 : 21 : 36

GMT

SUCCESS TO REGISTER DVR INFO

SELECT : ▲▼, CHANGE VALUE : + -

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

6) Go to your PC again after you see “SUCCESS TO REGISTER DVR INFO.” and then Click ‘refresh’

button. Then, DDNS Server automatically catches your DVR’s IP address and Port number.

Note.

Before using Web-Viewer, please add www.j2kip.com on Trusted Sites at first installation as

follows.

(Tools -> Internet Options -> Security -> Trusted Sites)

①

②

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

③

④

⑤

Click

⑥

Leave this check box empty

⑦

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP 7. DDNS Web Server

7-3. Web Program

*If ActiveX control installation is required for the first time access,please click ‘Yes’.

Click these icons, then it connects to DVR

Input information needed for network

connection to DVR manually.

automatically via DDNS Server.

VIEWER

BACKUP

PLAYER

Enables to show live image display.

Enables to back up recorded images in DVR to your PC.

Enables to back up recorded images on your PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 8 Specifications

• The best picture quality in Playback(JPEG-2000)

• Real time live display in all channels

• 16 channel video 480(400)ips recording capability

• Triplex (Playback/Recording/Ethernet)

• Multi-language menu

• Remote monitoring and download through network

• Convenient search function with Jog/shuttle

• VGA option available (Supporting TFT LCD Monitor)

• USB (Device) port for firmware upgrade

• Easy PTZ camera control by pre-assigned buttons

• Password Protection

• Remote Controller

Multiplex function

Triplex (Playback/Recording/Ethernet)

Storage

Capacity

Video

Internal

HDD

Up to 2 HDDs with no limitation in capacity (SATA HDD support)

CD-RW

Composite

VGA

For Backup

Inputs

16Ch

Outputs

2Ch (Monitor / SPOT)

1Ch (Supporting TFT LCD Monitor/Option)

Loop out

16Ch

Compression

JPEG-2000

Compression Rate

(Image size fixed)

Basic

Normal

Enhanced

Fine

Super Fine

Display Speed

Recording Mode

Real Time display

Recording

/Search

Schedule (Time, Motion, Alarm), Emergency

Event Search, Date/Time Search, Search Bar (Jog/Shuttle)

Full (120/100), Dual (240/200)

Recording Speed (NTSC/PAL)

Recording Resolution (NTSC/PAL) Full (720x240/720x288), Dual (360x240/360x288)

English, Spanish, German, Italy, France, to be added more

1~99 sec selectable

Multi-language

Switching Interval

Live Division Screen

1 / 4/ 6/ 8/ 9/ 13/ 16 Split

Digital Zoom, Freeze function available in Live mode, PIP, SEQ

Alarm

Inputs

16 Alarms (NO/NC selectable in SETUP menu)

1 (NO/NC)

Outputs

Post Alarm

Duration of alarm output : 1 sec ~ 300 sec selectable

Area division : 16 x12 / Detection Division : 32 x 24

Ethernet (TCP/IP), Remote viewer program included

VCR, CD-RW back-up, USB backup, Download via IP Network

RS-485, Key Control( Key assigned for each PTZ command)

USB port for firmware upgrade, CD-R

For PTZ camera control

Motion Detection

Network

Backup

PTZ Control

Firmware upgrade

Serial I/F

RS-485

RS-232C

For operation using keyboard of PC

Input

4CH Microphone Input

AUDIO

Output

1CH Speaker Output

Power Requirements

Weight

DC 12V 6.67A Adaptor

8.5kg

Dimensions (WXHXD) mm

Packing

436 X 396 X 88

600 X 520 X 180

Design and specifications are subjected to changes without notice

Download from Www.Somanuals.com. All Manuals Search And Download.

CHAP. 9 Remocon Key Definition

PTZ On/Off

Search Menu

PTZ

PTZ CONTOL

SET PRESET

CLEAR PRESET

GOTO PRESET

AUTO PAN

SET

OSD DISPLAY On/Off

4-SPLIT

CLEAR

GOTO

AUTO

9-SPLIT

16-SPLIT

Select Ch / Input Number

Indicates 2 digits

‘0’ + ‘0’ = ’10’

1~9

‘0’ + ‘0’ = ’11’

Emergency Recording

ESC

Screen Division / Change Mode

Move menu items & Change Value

Enter Menu & Select

Change Channel

FUNC

MODE

▲◀▶▼

CH + / -

+ / -

Change Value

I◀

Playback location

Backward Playback

Start Playback / Fast Forward

Go back to the end

Decrease Playback Speed

Pause

Change Audio Ch

AUDIO

◀

▶

▶I

◀◀

■

Stop

▶▶

SEQ

FRZ

PIP

ZOOM

Increase Playback Speed

SEQUENCE

FREEZE

Picture In Picture

ZOOM

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO :

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO :

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO :

Download from Www.Somanuals.com. All Manuals Search And Download.

16Channel Stand Alone DVR

Audio, USB Backup available

Best Picture Quality - JPEG2000

Download from Www.Somanuals.com. All Manuals Search And Download.

Lanier Printer Accessories LD228C User Manual
Lennox International Inc Humidifier 2 4SA13 User Manual
Liebert Network Card Integrated Cabinet Solutions User Manual
Lincoln Electric Welding System 404D 22 User Manual
Little Wonder Trimmer Extended Reach User Manual
Logitech Speaker System Ft User Manual
LST Network Card M201E 240 User Manual
Magnavox DVD Player NB530MGX User Manual
Magnavox Flat Panel Television 26MF605W 17 User Manual
Magnavox TV VCR Combo CCB255AT User Manual