Matsushita Laptop CF 19FHGAX User Manual

ORDER NO.

CPD0711208C1

Notebook Computer

Model No. CF-19FHGAXxM

This is the Service Manual for

the following areas.

M …for U.S.A. and Canada

Model No. CF-19FHGAX 1 M

1: Operation System

A: Microsoft® Windows® XP Professional

　　　　J: Microsoft® Windows® VISTA Business

Unauthorized copying and distribution is a violation of law.

Download from Www.Somanuals.com. All Manuals Search And Download.

LASER SAFETY INFORMATION

For U.S.A

Class 1 LASER-Product

This product is certified to comply with DHHS Rules 21 CFR Subchapter J.

This product complies with European Standard EN60825 (or IEC Publication 825)

For all areas

This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.

Caution:

(1) Use of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

(2) The drive is designed to be incorporated into a computer-based system or unit which has

an enclosing cover. It should never be used as a stand alone drive.

Danger:

The serviceman should not remove the cover of drive unit and should not service because

the drive unit is a nonserviceable part.

Please check DANGER label on PD-drive unit.

• Unplug the AC power cord to the equipment before opening the top cover of the drive.

When the power switch it on, do not place your eyes close to the front panel door to look into the interior

of the unit.

LASER Specification

Class 1 level LASER Product

Wave Length: DVD 658±8 nm

CD 775~815 nm

Laser safety information is appropriate only when drive with laser is installed.

3 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY PRECAUTIONS

1. Before servicing, unplug the power cord to prevent an electric shock.

2. When replacing parts, use only manufacture's recommended components

for safety.

3. Check the condition of the power cord. Replace if wear or damage is evident.

4. After servicing, be sure to restore the lead dress, insulation barriers,

insulation papers, shields, etc.

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk

of fire, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.

They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

LITHIUM BATTERY

This computer contains a lithium battery to enable the date, time, and other

data to be stored. The battery should only be exchanged by authorized

service personel.

Warning! A risk of explosion from incorrect installation or misapplication may

possibly occur.

LITHIUM BATTERY

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the equipment manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

LITHIUMBATTERIES

Vorsicht!

Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben order einen vom

Hersteller empfohlenen ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.

PILE AU LITHIUM

ATTENTION: IL Y A DANGER D'EXPLOSION S' IL Y A REMPLACEMENT INCORRECT DE LA PILE.

REMPLACER UNIQUEMENT AVEC UNE PILE DU MÈME TYPE OU D'UN TYPE RECOMMANDÉ PAR LE

CONSTRUCTEUR. METTRE AU RÉBUT LES PILES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU

FABRICANT.

4 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions (Battery Pack)

Do Not Use with Any Other Product

The battery pack is rechargeable and was intended for

the specified product. If it is used with a product other

ꢀ Do not touch the terminals on the battery pack. The

battery pack may no longer function properly if the

contacts are dirty or damaged.

than the one for which it was designed, electrolyte leak- ꢀ Do not expose the battery pack to water, or allow it to

age, generation of heat, ignition or rupture may result.

become wet.

ꢀ If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery pack until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

Do Not Charge the Battery Using Methods Other Than

Those Specified

If the battery is not charged using one of the specified

methods, electrolyte leakage, generation of heat, ignition ꢀ This computer prevents overcharging of the battery by

or rupture may result.

recharging only when the remaining power is less than

approx. 95% (when Economy Mode (ECO) is enabled:

75%) of capacity.

Do Not Throw the Battery Pack into a Fire or Expose It

to Excessive Heat

Generation of heat, ignition or rupture may result.

ꢀ The battery pack is not charged when the computer is

first purchased. Be sure to charge it before using it for

the first time. When the AC adaptor is connected to

the computer, charging begins automatically.

ꢀ Should the battery leak and the fluid get into your

eyes, do not rub your eyes. Immediately flush your

eyes with clear water and see a doctor for medical

treatment as soon as possible.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight,

for Example)

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects into the Battery Pack,

Expose It to Bumps or Shocks, Disassemble, or Mod-

ify It

Electrolyte leakage, generation of heat, ignition or rupture

may result.

NOTE

ꢀ The battery pack may become warm during

recharging or normal use. This is completely nor-

mal.

ꢀ Recharging will not commence if internal tempera-

ture of the battery pack is outside of the allowable

temperature range (0 °C to 55 °C {32 °F to 131

Do Not Short the Positive (+) and Negative (-) Con-

tacts

Generation of heat, ignition or rupture may result. Do not

place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing.

°F}). (ꢁ

Reference Manual “Battery Power”)

Once the allowable range requirement is satisfied,

charging begins automatically. Note that the

recharging time varies based on the usage condi-

tions. (Recharging takes longer than usual when

the temperature is 10 °C {50 °F} or below.)

ꢀ If the temperature is low, the operating time is

shortened. Only use the computer within the

allowable temperature range.

ꢀ The battery pack is a consumable item. If the

amount of time the computer can be run by using a

particular battery pack becomes dramatically

shorter and repeated recharging does not restore

its performance, the battery pack should be

replaced with a new one.

ꢀ When transporting a spare battery inside a pack-

age, briefcase, etc., it is recommended that it be

placed in a plastic bag so that its contacts are pro-

tected.

ꢀ Always power off the computer when it is not in

use. Leaving the computer on when the AC adap-

tor is not connected will exhaust the remaining bat-

tery capacity.

Do Not Use This Product with a Battery Pack Other

Than the One Specified

Use only the specified battery pack with your product.

Use of battery packs other than those manufactured and

supplied by Panasonic may present a safety hazard

(generation of heat, ignition or rupture).

A lithium ion battery that is recyclable

powers the product you have pur-

chased.

Please call 1-800-8-BATTERY for

information on how to recycle this

battery.

L’appareil que vous vous êtes

procuré est alimenté par une batterie

au lithium-ion.

Pour des renseignements sur le recy-

clage de la batterie, veuillez com-

poser le 1-800-8-BATTERY.

5 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

1. Specifications

1-1

2-1

3-1

4-1

5-1

6-1

7-1

8-1

9-1

10-1

11-1

2. Names and Functions of Parts

3. Block Diagram

4. Diagnosis Procedure

5. Power-On Self Test (Boot Check)

6. List of Error Codes <Only when the port replicator is connected>

7. Self Diagnosis Test

8. Wiring Connection Diagram

9. Disassembly/Reassembly

10. Exploded View

11. Replacement Parts List

6 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Specifications

This page provides the specifications for the basic model CF-19FHGAXBM/CF-19FDGAXVM.

The model number is different according to the unit configuration.

To check the model number:

Check the bottom of the computer or the box the computer came in at the time of purchase.

To check CPU speed, memory size and the hard disk drive (HDD) size:

Run the Setup Utility (

Reference Manual “Setup Utility”) and select [Information] menu.

[CPU Speed]: CPU speed, [System Memory]: Memory size, [Hard Disk]: Hard disk drive size

Main Specifications

Model No.

CF-19FHGAXBM

CF-19FDGAXVM

Intel^®Core™ 2 Duo Processor U7500 (1.06 GHz, 2 MB^*1L2 cache, 533 MHz FSB)

CPU

Chipset

Intel^®GM965

Memory^*2*4

GB (4 GB Max.)

Video Memory^*1*3

Hard Disk Drive^*4

Display Method

Internal LCD^*5

External Display^*6

UMA (384 MB Max.)

80 GB

10.4 XGA type (TFT)

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots)

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 768 dots/1280 × 1024

dots/1440 × 900 dots)

Wireless LAN^*7

Bluetooth^TM

LAN

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T

Data: 56 kbps (V.92) FAX: 14.4 kbps

WAVE and MIDI playback, Intel^®High Definition Audio subsystem support, Monaural speaker

TPM (TCG V1.2 compliant)^*9

Modem

Sound

Security Chip

Card Slot

PC Card

Type I or Type II x 1 (3.3

: 400 mA, 5

: 400 mA)

ExpressCard^*10

Smart Card^*12

ExpressCard/34^*11or ExpressCard/54 x 1

ISO7816 x 1

SD Memory Card^*13

x 1, Data transfer rate = 8 MB per second^*14

200-pin, 1.8 , SO-DIMM, DDR2 SDRAM, PC2-4200 Compliant

RAM Module Slot

Interface

USB port (4-pin, USB 2.0) x 2, Serial Port (Dsub 9-pin male), Modem port (RJ-11), LAN port

(RJ-45), External display port (Mini Dsub 15-pin female), Expansion Bus Connector (Dedicated

100-pin female), External Antenna Connector (Dedicated 50 Ωcoaxial connector) x 2, IEEE

1394a Interface Connector (4-pin x 1), Microphone Jack (Miniature jack, 3.5 DIA, Stereo),

Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW × 2)

Keyboard / Pointing Device

82 keys / Touch Pad / Touchscreen (Anti-

Reflection, Stylus (included) touch capable)

82 keys / Touch Pad / Digitizer (Anti-Reflec-

tion)

Power Supply

AC Adaptor^*15

Battery Pack

AC adaptor or Battery pack

Input: 100

to 240

AC, 50 Hz/60 Hz, Output: 16.0

DC, 3.75

Li-ion 10.65

, 5.7 Ah

Operating Time^*16

Approx. 7 hours^*17

Approx. 7.5 hours

Approx. 4.5 hours

Charging

Time^*16

Power on

Power off

Clock Battery

Power Consumption^*18

Coin type lithium battery 3.0

Approx. 30

^*19/ Approx. 60

271 mm × 49 mm × 216 mm {10.7" × 1.93" × 8.5"}

(Maximum when recharging in the ON state)

Physical Dimensions (W × H × D)

(excluding the hand strap/shoul-

der strap)

Weight

Approx. 2.30 kg {Approx. 5.06 lb.

}

Approx. 2.35 kg {Approx. 5.17 lb.}

(excluding the hand strap/shoul-

der strap)

Operation Environment

Temperature: 5 °C to 35 °C {41 °F to 95 °F

}

Humidity: 30 to 80 RH (No condensation)

Storage Environment

Temperature: -20 °C to 60 °C {-4 °F to 140 °F

}

Humidity: 30

to 90

RH (No condensation)

7 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Main Specifications

Operating System

Microsoft^®Windows^®XP Professional Service Microsoft^®Windows^®XP Tablet PC Edition

Pack 2 with Advanced Security Technologies 2005

(NTFS File System)

Utility Programs

DMI Viewer, Microsoft^®Windows^®Media Player 10, Adobe Reader, PC Information Viewer,

SD Utility, Icon Enlarger, Loupe Utility, Intel^®Matrix Storage Manager, Intel^®PROSet/Wireless

Software^*7, Bluetooth™ Stack for Windows^®by TOSHIBA^*8, Wireless Switch Utility, Hotkey

Settings, Battery Recalibration Utility, Panasonic Hand Writing^*20, Software Keyboard^*20, Dis-

play Rotation Tool, InÞneon TPM Professional Package^*21, Recover Pro^TM6^*21orRecover Pro^TM

VX^*21, Tablet Buttons Settings^*20, Power Saving Utility, Wireless Connection Disable Utility^*21

Setup Utility, Hard Disk Data Erase Utility^*22, PC-Diagnostic Utility

Wireless LAN <Only for model with wireless LAN>

Intel Wireless WiFi Link 4965AG (802.11 a + b + g)^*23

Data Transfer Rates^*24

IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)

IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)

IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)

Standards Supported

Transmission method

Wireless Channels Used

IEEE802.11a/IEEE802.11b/IEEE802.11g

OFDM system, DSSS system

IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165

IEEE802.11b/IEEE802.11g: Channels 1 to 11

RF Frequency Band

IEEE802.11a: 5.18-5.32 GHz, 5.745-5.825 GHz

IEEE802.11b/IEEE802.11g: 2.412-2.462 GHz

Bluetooth^TM<Only for model with Bluetooth>

Bluetooth Version

2.0 + EDR

Transmission method

Wireless Channels Used

RF Frequency Band

FHSS system

Channels 1 to 79

GHz

2.402-2.48

MB = 1,048,576 bytes

You can physically expand the memory upto 4

the actual system configuration.

, but the total amount of usable memory available will be less depending on

A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video

Memory cannot be set by the user.

GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB

A 16,777,216 color display is achieved by using the dithering function.

Maximum resolution depends on the specifications of the external display.

Only for model with wireless LAN

Only for model with Bluetooth

For information on TPM, click [start] - [Run] and input “c:\util\drivers\tpm\README.pdf”, and refer to the Installation Manual of

“Trusted Platform Module (TPM)”.

Only for model with ExpressCard slot

When using ExpressCard/34, the card slot cover cannot be closed.

Only for model with Smart Card slot

*10

*11

*12

*13

SD Memory Cards that support high-speed transfer rates can be used. Windows Ready Boost function is also supported.

Operation has been tested and confirmed using Panasonic SD Memory Cards and SDHC Memory Cards with a capacity of up

to 8 GB. Operation on other SD equipment is not guaranteed.

This computer is not compatible with MultiMediaCards. Do not insert this kind of cards.

Theoretical value and not the actual speed. The transfer rate does not become higher even if you use a card that supports the

higher transfer rate.

*14

*15

The AC adaptor is compatible with power sources up to 240

AC adaptor. The computer is supplied with a 125

AC compat-

20-M-2-1

ible AC cord.

*16

*17

Varies depending on the usage conditions.

Measured using MobileMark™ 2005 (LCD brightness: 60 cd/m²)

*18

*19

*20

*21

*22

*23

*24

Approx. 0.9

when the battery pack is fully charged (or not being charged) and the computer is OFF.

23-E-1

Rated power consumption

Only for model with Windows XP Professional

You need to install to use the feature.

The Product Recovery DVD-ROM is required.

It does not correspond to IEEE802.11.n.

These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.

8 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Names and Functions of Parts

A: Wireless LAN Antenna

G: LCD

Reference Manual “Wireless LAN”

Reference Manual “Touchscreen”

Reference Manual “Digitizer”

H: Display Release Latch

I: Speaker

B: Bluetooth Antenna

Reference Manual “Bluetooth”

C: Stylus/Pen Holder

D: Touch Pad

E: LED Indicator

Reference Manual “Key Combinations”

J: Function Key

Wireless ready

Reference Manual “Key Combinations”

This indicator lights when Wireless LAN, Blue-

tooth, and/or Wireless WAN are connected and

ready. It does not necessarily indicate the On/Off

condition of the wireless connection.

Reference Manual “Disabling / Enabling

Wireless Communication”

K: Keyboard

L: Hard Disk Drive

Reference Manual “Hard Disk Drive”

M: Battery Pack

N: Power Switch

: Wireless WAN status

Refer to the instruction manual of the wireless

device.

O: LED Indicator

: Battery status

Reference Manual “Battery Power”

: Power status

: Caps lock

(Off: Power off/Hibernation, Green: Power on,

Blinking green: Standby)

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk drive status

F: Tablet Buttons

Reference Manual “Tablet Buttons”

9 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Left side

Rear side

Bottom

A: DC-IN Jack

B: USB Port

L: Microphone Jack

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur as a result.

When recording in stereo using a stereo micro-

phone:

Click [start] - [All Programs] - [SoundMAX] -

[Control Panel] and select [Microphone], and then

add a check mark for [No Filtering] in [Microphone

Enhancements].

When using a monaural microphone with a 2-termi-

nal plug:

Click [start] - [All Programs] - [SoundMAX] -

[Control Panel] and select [Microphone], and then

add a check mark for [Voice Recording] in

[Microphone Enhancements].

Reference Manual “USB Devices”

C: IEEE 1394 Interface Connector

Reference Manual “IEEE 1394 Devices”

D: Modem Port

Reference Manual “Modem”

E: LAN Port

Reference Manual “LAN”

F: SD Memory Card Indicator

(Blinking: During access)

Reference Manual “SD Memory Card”

G: SD Memory Card Slot

Reference Manual “SD Memory Card”

H: Wireless Switch

Reference Manual “Disabling / Enabling

Otherwise, only audio on the left track will be recorded.

M: Security Lock

A Kensington cable can be connected.

For further information, read the manual that comes

with the cable.

Wireless Communication”

I: <for model without Smart Card Slot>

N: External Display Port

PC Card Slot

Reference Manual “External Display”

Reference Manual “PC Card / ExpressCard”

O: Serial Port

P: RAM Module Slot

Smart Card Slot

Reference Manual “RAM Module”

Q: Expansion Bus Connector

Reference Manual “Smart Card”

J: <for model without Smart Card Slot>

Reference Manual “Port Replicator / Car Mounter”

R: External Antenna Connector

ExpressCard Slot

Reference Manual “PC Card / ExpressCard”

PC Card Slot

Reference Manual “PC Card / ExpressCard”

K: Headphone Jack

You can connect headphones or ampli?ed speakers.

When they are connected, audio from the internal

speakers is not heard.

10 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Block Diagram

1 . 5 V

H U B I n t e r f a c e

11 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Diagnosis Procedure

4.1. Basic Procedures

12 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

4.2. Troubleshooting

Please take note of the following two points with regard to troubleshooting:

1. Know-how of diagnosis upon occurrence of heavy troubles, e.g. Set cannot be turned ON, Set fails to start , No display on

screen , etc.

2. Explanation of each trouble, mainly symptom of trouble in operation.

Flow Chart

Pay attention to the following points when in pursuit of the cause of a troubleshooting.

1. Peripheral apparatus connected with the set should all be removed before operation check.

2. Make sure that cables, boards, etc. are not coming off, and recheck the contact condition.

START

Set cannot be supplied with current.

Power lamp fails to light up.

Adaptor/Battery

Output voltage

Replace AC Adaptor/Battery

Check contact condition of power input terminal. Replace if

defective.

Check Power SW. Replace if defective.

YES

Power lamp

check

Dark display on screen.

Screen fails to display.

Replace inverter board.

Check inverter cable continuity. Replace if defective

Inverter board

LCD back

Replace LCD back light.

light lighting

YES

LCD unit

check

Replace LCD unit.

BIOS operation

check

Replace main board (Check fuse at power source).

Failure in starting

YES

Refer to POST

error code table.

Result of

POST

Replace main board.

Heavy trouble e.g.,

Set-up utility

starting

Replace main board.

Set cannot be turned

ON, Set fails to start ,

No display on

Return set-up utility setpoint to the state of delivery from factory .

screen , etc.

Check HDD cable connection and continuity.

Replace if defective.

Replace HDD & Reinstall.

Replace main board.

HDD access

YES

Main board

check

Replace main board

Not displayed properly on screen.

Some or all keys cannot be input.

Make sure of contact of K/B connector in use.

Replace keyboard or main board.

Each kind of

trouble in

operation.

Check if there are any flaws on CD media. Since

flaws may appear on specific media, CD media

can be defective.

Trouble

symptoms on some

of CD

CD CALL not practicable.

YES

Replace main board.

Starts but operates unstably.

Reinstall HDD.

Replace main board.

START

END

13 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Power-On Self Test (Boot Check)

Outline of POST

The set has a boot check function called POST (Power-On Self Test) in it.

The condition of the main body is diagnosed by checking beep sound or error code.

Start .............Test begins automatically when power switch is set to ON.

Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop.

Note: If no error occurs, nothing is displayed. (No display of OK, etc.)

Error Diagnosis by Checking Beep Signal Sound

The beep sound is as follows:

(1 (long sound) -2-3-4)

(Length of bar shows length of sound.)

= long sound (about 0.4 sec.),

= short sound (about 0.2 sec.), Length between sounds is about 0.1 sec.

Table of errors classified by beep sounds

Diagnosis

Beep signal sound

Error message

BIOS ROM error

Main board

1(long sound)-2

1-2-2-3

BIOS ROM error

1-3-1-1

RAM error

1-3-1-3

Keyboard controller error

RAM error

1-3-4-1

1-3-4-3

RAM error

1-4-1-1

RAM error

2-1-2-3

BIOS ROM error

2-2-3-1

Occurrence of unexpected offering

(Note) A beep sound is also issued in case of other I/O trouble.

14 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

6 List of Error Codes <Only when the port replicator is connected>

The following is a list of the messages that BIOS can display. Most of them occur during

POST. Some of them display information about a hardware device, e.g., the amount of memory

installed. Others may indicate a problem with a device, such as the way it has been configured.

Following the list are explanations of the messages and remedies for reported problems.

If your system displays one of except the messages marked below with an asterisk (*), write

down the message and contact Panasonic Technical Support. If your system fails after you

make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults

or correct the error.

0200 Failure Fixed Disk

Fixed disk in not working or not configured properly. Check to see if fixed disk is attached

properly. Run Setup. Find out if the fixed-disk type is correctly identified.

0210 Stuck key

Stuck key on keyboard.

0211 Keyboard error

Keyboard not working.

0212 Keyboard Controller Failed

Keyboard controller failed test. May require replacing keyboard controller.

0213 Keyboard locked - Unlock key switch

Unlock the system to proceed.

0230 System RAM Failed at offset : nnnn

System RAM failed at offset nnnn of in the 64k block at which the error was detected.

0231 Shadow RAM Failed at offset : nnnn

Shadow RAM failed at offset nnnn of the 64k block at which the error was detected.

0232 Extended RAM Failed at offset : nnnn

Extended memory not working or not configured properly at offset nnnn.

0250 System battery is dead - Replace and run SETUP

The CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup

to reconfigure the system.

*0251 System CMOS checksum bad - Default configuration used

System CMOS has been corrupted or modified incorrectly, perhaps by an application program

that changes data stored in CMOS. The BIOS installed Default SETUP Values. If you do not

want these values, enter Setup and enter your own values. If the error persists, check the system

battery or contact Panasonic Technical Support.

0260 System timer error

The timer test failed. Requires repair of system board.

0270 Real time clock error

Real-time clock fails BIOS test. May require board repair.

*0280 Previous boot incomplete - Default configuration used

Previous POST did not complete successfully. POST loads default values and offers to run

Setup. If the failure was caused by incorrect values and they are not corrected, the next boot

will likely fail. On systems with control of wait states, improper Setup settings can also termi-

nate POST and cause this error on the next boot. Run Setup and verify that the wait-state

configuration is correct. This error is cleared the next time the system is booted.

0281 Memory Size found by POST differed from EISA CMOS

Memory size found by POST differed from EISA CMOS.

15 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

02D0 System cache error - Cache disabled

Contact Panasonic Technical Support.

02F0: CPU ID:

CPU socket number for Multi-Processor error.

02F4: EISA CMOS not writable

ServerBIOS2 test error: Cannot write to EISA CMOS.

02F5: DMA Test Failed

ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.

02F6: Software NMI Failed

ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).

02F7: Fail - Safe Timer NMI Failed

ServerBIOS2 test error: Fail-Safe Timer takes too long.

device address Conflict

Address conflict for specified device.

Allocation Error for: device

Run ISA or EISA Configuration Utility to resolve resource conflict for the specified device.

Failing Bits : nnnn

The hex number nnnn is a map of the bits at the RAM address which failed the memory test.

Each 1 (one) in the map indicates a failed bit. See error 230,231 or 232 for offset address of the

failure in System, Extended or Shadow memory.

Invalid System Configuration Data

Problem with NVRAM (CMOS) data.

I/O device IRQ conflict

I/O device IRQ conflict error.

Operating System not found

Operating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed

disk and drive A: are properly identified.

Parity Check 1 nnnn

Parity error found in the system bus. BIOS attempts to locate the address and display it on the

screen. If it cannot locate the address, it displays ????. Parity is a method for checking errors

in binary data. A parity error indicates that some data has been corrupted.

Parity Check 2 nnnn

Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the

screen. If it cannot locate the address, it displays ????.

Press <F1> to resume, <F2> to Setup

Displayed after any recoverable error message. Press <F1> to start the boot process or <F2> to

enter a Setup and change the settings. Write down and follow the information shown on the

screen.

16 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Self Diagnosis Test

As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the

enhancing test by the module of the main body building in are possible.

●Notes　To skip BIOS password

　　　　　　　　　Use <Ctrl>+<F10> key to skip BIOS password or authentication of fingerprint.

　　　　　　　　　This key is only for entering DIAG mode. Not available to boot the computer.

　　　　　　　　　If customer set "HDD Lock", the DIAG program cannot perform HDD test.

　　　　　　　　　*This key is for service purpose only. Do not disclose this information to unrelated others.

1. Beginning of self-diagnosis test

　1-1. Setting of content of setup

　　　　1.　The power supply of the computer is turned on.

　　　　2.　" F2 " is pushed on the screen of "Panasonic" while " press <F2 to enter Setup> " is displayed.

　　　　3.　The setup utility starts and then takes notes of the content of the BIOS setup of present set.

　　　　4.　" F9 " is pushed, " Yes" is selected on the screen of " Is the default value loaded? ", and " Enter"

　　　　　　is pushed.

　　　　5.　" F10 " is pushed.

　　　　6.　" Yes" is selected on the screen of the setup confirmation, and " Enter" is pushed.

　　　　7.　The computer starts automatically.

　　　Attention

　　　　　・If the device which can be set is set to "Invalidity" by "Advanced" or "Security" menu, becomes an

　　　　　　error by "PC-Diagnostic utility".

　　　　　　(It is judged that the device which can be set to "Invalidity" by "Main" menu such as "Flat pad" is

　　　　　　normal if the controller operates normally though sets to "Invalidity" by the setup. )

　　　　　・In the model with built-in DVD of the USB connection, even if DVD is normal, becomes an error if

　　　　　　legacy USB is set to "Invalidity"

　1-2. When you execute an automatic test

1.　"Ctrl" + "F7" is pushed while the "Panasonic" start screen is displayed after the computer is started.

2. The test of all devices begins automatically by "PC-Diagnostic utility" 's starting.

Attention

・It is a test which the customer who bought PC can execute. (As for HDD, the enhancing test is also

possible.)

・A flat pad does not work for a while after starting "PC-Diagnostic utility".

・The movement of a flat pad might become abnormal If after RAM begins from the CPU/System

test, a flat pad will be operated in about 30 seconds. In that case,restarts pushing"Alt" + "Ctrl" +

"Del" key. Or, please start "PC-Diagnostic utility" again after doing the power supply switch in the

slide, and turning off the power supply.

1-3. When you execute the enhancing test

1. Please let me discontinue diagnosing clicking

to end an automatic test.

2. Please click on the character of "D" "PC-Diagnostic utility" on the screen while pushing both of right

"Shift" and left "Shift" keys.

3. All devices which can select the enhancing test make the setting of the enhancing test possible.

4. The district device is made"FULL" display (enhancing test).

5. The test begins clicking

*Please refer to item 4 for the error result of each test and the division of the breakdown part.

17 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Operation of PC-Diagnostic Utility

-Only the device which can be inspected on the entire screen is displayed.

-The item does not appear when the device of wireless LAN etc. is not physically connected.

-The movement of the item must use an arrow key or a flat pad.

-As for the device under the diagnosis, blue and yellow are alternately displayed at the left of the icon.

- The diagnosis result of the device greens at the left of the icon when it is normal, and becomes red when

abnormal.

-When the test of all devices ends, the test result is displayed under the right of the screen.

-Please click

while diagnosing when being stop on the way by the time the test of all devices ends.

when you restart "PC-Diagnostic utility".

*Each device is tested from the beginning, and it is not possible to restart on the way.

-When the test of all devices ends, the test result is displayed under the right of the screen.

18 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

2-1. Selection of tested device

-To test only a specific device, "Test" and "Do not test" of each device can be selected.

-The device which can select the enhancing test changes in order of "The standard is tested" and "Do not

test" whenever the device icon is clicked.

Start the standard test

Do not test

Please begin testing clicking

if the selection of the tested device ends.

2-2. "PC-Diagnostic utility" End method

When

of "Close" on the right of the screen is clicked, the computer reactivates automatically. Or, the

power supply switch is done in the slide and the power supply is turned off.

2-3. The content of the setup is returned to the setting of the user

1. Turned on the computer.

2. "F2" is pushed on the screen while "Press<F2>to enter Setup" is displayed of "Panasonic".

3. Push "F10", and on the screen of "Is the change in the setting preserved and do end?"and then "Yes"

is selected, and "Enter" is pushed.

4. The computer reactivates automatically.

5. The end option is chosen by the start menu, and the power supply of the computer is turned off.

Standard at test time

All devices other than RAM and HDD ---------- about 1 minute

RAM standard test ----------------------------------- 1 - 2 minutes

HDD standard test ----------------------------------- 2 - 3 minutes

HDD enhancing test (60GB) ---------------------- about 40 minutes

Ex.The standard when the standard <all device> is tested becomes 1+2+3=6 minutes.

■ There is greatly a difference from RAM test when the memory is increased according to the performance

of the memory occasionally.

■ Moreover, when the main body of PC under the test is a high temperature, it occasionally takes time.

■ There is greatly a difference from HDD according to the performance of the drive occasionally.

19 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Test Item and Division of trouble

Place with possibili-

ty of breakdown

Enhan-

cing

Test item Stanard

Content of standard test

Content of enhancing test

CPU is shifted to protected mode, and

"Violation of the paging", "Operation of

the violation of a privileged instruction",

and DMA, INT, TIMER, and the

CPU /

Main board

CPU /

SYSTEM

RTC operation are confirmed.

All memory space is tested in a special

memory access pattern based on

"R.S.T . technology".

Memory /

Mainboard

RAM

The record area frequently accessed

with Microsoft Windows XP to test in

about two minutes regardless of

HDD /

Mainboard /

Cable /

All record area is tested.

HDD

points of HDD is emphatically tested.

Connector

It is confirmed not to find abnormality

in the AC97 modem controller.

MODEM/

Mainboard

MODEM

Wireless LAN

board /

Connector /

Mainboard

It is confirmed not to find abnormality

in the Wireless LAN modem controller.

Wireless

LAN

Sound *5

It is confirmed not to find ab-

normalityin the wiring between

the USB controller and the

connector by confirming

the connection of the USB

equipment connected with the

USB connector.

Mainboard /

Connector

It is confirmed not to find abnormality

in the USB controller.

USB

It is confirmed not to find ab-

normalityin the wiring between

the controller and the

connector by connecting to

HUB with LAN cable.

Mainboard /

Connector

It is confirmed not to find abnormality

in the LAN controller.

LAN

It is confirmed not to find abnormality

in the CardBus controller.

Mainboard

PC Card

It is confirmed not to find abnormality

in the SD controller.

The key is actually input, and

the operation is displayed on

the screen.

It is confirmed not to find abnormality

in keyboard controller's keyboard inte-

rface.

Mainboard /

Keyboard

The operation is actually dis-

played on the screen by ope-

rating the touch pad.

Whether keyboard controller's mouse

interface operates normally is confir-

med.

Mainboard /

Touch Pad

DVD-ROM

Mainboard /

DVD Drive /

DVD Cable /

DVD Connector

The drive is normally reset, and it is

accessible is confirmed.

It is confirmed to be able to

read media normally.

20 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

The place with possibility of

breakdown

Test Item

Standard Enhanced

Content of Standard Test

Content of Extend Test

It is confirmed not to find

abnormality in the USB

connection of Touch Screen.

This test cannot find

abnormality of Touch Screen.

It is confirmed not to find

abnormality in the connection

of Main board and Bluetooth

module.

It is confirmed not to find

abnormality in the connection

of Main board and Wireless

WAN module.

Perform Touch Screen

functionality practically.

Operator has to judge

PASS/FAIL with test result.

Main board/

Touch Screen

Bluetooth

Bluetooth cable

WWAN cable

Wireless WAN

It is confirmed not to find

abnormality in the legacy FD

drive.

FD Drive/

Main board (Super I/O)/

FDD cable

Floppy

Video

This test cannot find

abnormality of mechanical

breakdown. (e.g.. Head, Motor)

It is confirmed not to find

abnormality in access to

VRAM with VESA.

The PC which uses main

memory as VRAM may fail with

main memory failure.

It is confirmed not to find

abnormality in the connection

of Main board and GPS

It is confirmed not to find

abnormality in the IEEE1394

controller.

FDD connector

Main board

(Chipset, Graphic

Controller)/

Memory

GPS

GPS cable

Main board

(IEEE#394 Controller)

IEEE1394

It is confirmed not to find

abnormality in the wiring

between Chipset and Express Express Card Connector

Card.

Main board (Chipset)/

Express Card

Smart Card

It is confirmed not to find

abnormality in the Smart Card

controller.

Main board

(Smart Card Controller)

It is confirmed not to find

abnormality in the wiring

between Super I/O and Serial

Main board (Super I/O)/

Connector.

This test cannot find failure of

cable characteristic and device

problems.

It is confirmed not to find

abnormality of Super I/O

UART function.

This test cannot find lack of

wiring between Super I/O and

Serial Connector.

Serial Port

Serial Connector

It is confirmed not to find

abnormality in the wiring

between Super I/O and

Main board (Super I/O)/

Parallel Connector.

This test cannot find failure of

cable characteristic and device

problems.

It is confirmed not to find

abnormality of Super I/O

parallel function.

This test cannot find lack of

wiring between Super I/O and

Parallel Connector.

Parallel Port

Parallel Connector

Please connect the USB device with the port (USB connector) which wants to test before the tests.

Please connect LAN port with LAN HUB with LAN cable before the tests.

The operator actually inputs the key, and the operator judges PASS/FAIL of the test.

The operator actually operates the mouse, and the operator judges PASS/FAIL of the test.

*5 It is not abnormal though the sound is emitted from the speaker while testing.

When the test result is PASS, trouble is thought by not hearing of the sound under the test from

the speaker and the headphone by the wiring of the audio output system.

*6 Please set DVD/CD media in the drive before the tests.

*7 Please set a Special Loop Back Connector Tool at serial connector for Enhanced Test.

(This Connector Tool is same as the one used before.)

*8 Please set a Special Loop Back Connector Tool at parallel connector for Enhanced Test.

(This Connector Tools is same as the one used before.)

21 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Wiring Connection Diagram

BT PCB

INVERTER PCB

BACK LIGHT

LCD

CN1 CN2

CN2

TS PS2 PCB

CN901

Touch

Screen

Panel

HSDPA PCB

CN900

SERIAL

EXTERNAL

JK601

JK600

PORT

DISPLAY PORT

CN881

CN882

I/F PCB

CN851

CN880

CN883

CN604

CN600

JK880

DC-IN

RTC

BATTERY

I/O PCB

H/P MIC

CN16

CN27

CN9

CN14

CN24

CN18

CN25

CN901

CN6

USB

AUDIO PCB

MODEM

PCB

IEEE

1394

CN22

CN3

COIN

BATTERY

KEYBOARD

CN17 CN8

CN5

SD PCB

CN882

LAN

PORT

MAIN PCB

CN12

CN21

CN11

LAN-

AUX

HDD

CN4

DIMM

CN2

WIRELESS

MODULE

CN10

PCMCIA UNIT

DIMM

POWER SW PCB

CN23

CN15

CN980

ANT PCB

BAT FPC

TOUCH PAD

GPRS

PAD PCB

MAIN BATTERY

LAN-

MAIN

CN801

CN807

CN805

CN800

CN804

CN802

RIGHT

LED PCB

SW PCB

LEFT LED PCB

CN841

CN780

CN950

22 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9 Disassembly/Reassembly

Note:

Power off the computer. Do not shut down to the Suspend or hibernation mode.

Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.

9.1. Disassembly Instructions

HDD Case B

Hooks

9.1.1.

Preparation

Before disassembling, be sure to make the following prepara-

Hooks

tions.

HDD FPC

ï Shut down Windows and turn off the power.

ï Disconnect the AC adaptor.

HDD

ï Remove the optional DIMM memory card and PCMCIA card

if they are connected.

ï Remove other devices if they are connected.

Heater

Attention:

ï Please execute writing BIOS ID when you exchange the

<N13>

Main Board.

ï Parts (Sheet and rubber) etc. related various the Conductive

Cloth and Heat Spreader cannot be recycled. Use new parts.

<N13>

9.1.2.

Removing the Battery Pack and

HDD Pack

HDD Case A

5. Remove the two Screws <N13>.

6. Remove the HDD Case A and the HDD Case B.

7. Remove the HDD

Screws <N13> : DXQT2+D4FNL

9.1.3.

Removing the Touch Pad and Key-

board

KBD Plate

<N9>

KBD Plate

<N9>

Palm Rest Ass'y

<N9>

HDD Pack

Battery Pack

1. Open the Battery Cover.

2. Remove the Battery Pack.

3. Open the HDD Cover.

4. Remove the HDD Pack.

1. Remove the Palm Rest Ass'y.

Note:

The Palm Rest Ass'y is firmly fixed with two-sided

tape.

Carefully remove the Palm Top Cover Sheet not to

damage it.

2. Remove the 4 Screws <N9>.

3. Remove the KBD Plate.

23 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

10. Disconnect the Cable from Connector (CN800).

11. Remove the Touch Pad and Click Button Plate.

Screws <N1> : DFHE5025XA

Screws <N9> : DRSB2+5FKL

9.1.4.

Removing the DIMM Lid Assíy

<K14-8>

DIMM Lid Ass'y

Keyboard

4. Lift the far side of the Keyboard and slide it to backward,

and then turn the Keyboard over frontward.

<N1>

1. Remove the 4 Screws <K14-8>.

2. Remove the DIMM Lid Ass'y.

KBD

Connector

Cover

Screws <K14-8> : DRHM5025YAT

9.1.5.

Removing the Rear Cabinet

<N10>

5. Remove the 3 Screws <N1>.

<N10>

6. Remove the KBD Connector Cover.

<N10>

Keyboard

<N10>

Keyboard

FPC

TP Tape

Touch Pad

1. Remove the 13 Screws <N10>.

2. Open the LID Rubbers.

3. Remove the Rear Cabinet.

Click Button

Plate

Screws <N10> : DRHM0061ZA

Connector

(CN800)

(CN18)

7. Disconnect the Cable from Connector (CN18).

8. Remove the Keyboard.

9. Remove the TP Tape.

24 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.1.6.

Removing the DU Lid Unit

<N19>

<K14-9>

Connector(CN1)

Plate

Bluetooth PCB

Antenna Cable(blue)

<K14-9>

Clamper

Connector(CN604)

HSDPA PCB

<N19>

DIMM Lid Angle

<N19>

DU Lid

6. Disconnect the Antenna Cable from the Clamper.

7. Disconnect the Antenna Cable.

8. Remove the 4 Screws. <N19>

1. Remove the 7 Screws <K14-9>.

2. Remove the DU Lid Angle and DU Lid.

9. Disconnect the Cable from the Connector (CN604).

10. Remove the 2 Screws. <N19>

Screws <K14-9> : DXQT2+D25FNL

11. Disconnect the Cable from the Connector (CN1) and

remove the Bluetooth PCB and HSDPA PCB.

9.1.7.

Removing the HSDPA PCB and

Bluetooth PCB

Screws <N9> : DRSB2+5FKL

Screws <N19> : XSB2+3FNL

Tape

<N9>

Antenna Cable(brown)

Antenna Cable(black)

9.1.8.

Removing the Audio PCB

<N9>

HSDPA PCB

<N9>

Connector(CN600)

<N9>

Audio PCB

Cable Holder Cushion

Connector(CN901)

1. Remove the Cable Holder Cushion.

2. Disconnect the 2 Antenna Cables (brown, black).

3. Remove the Tape.

4. Remove the 4 Screws. <N9>

5. Disconnect the Cable from the Connector (CN600).

1. Remove the 3 Screws <N9>.

2. Disconnect the Cable from a Connector (CN901).

3. Remove the Audio PCB.

Screws <N9>:DRSB2+5FKL

25 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.1.9.

Removing the Main PCB, Wireless

Module, SD PCB, Antenna PCB and

Modem PCB

<N8>

HDD

Connector Guide

<N19>

Connector

(CN882)

<N9>

SD PCB Ass'y

BAT FPC Ass'y

Connector(CN8)

Connector(CN17)

Note:

This procedure is not necessary if the computer is not

equipped with Wireless Module or Modem PCB.

1. Disconnect the 2 LCD Cables. (CN8,CN17)

Connector(CN15)

DU PCB

<N3>

5. Remove the 2 Screws <N8>, and remove the HDD Con-

nector Guide.

6. Remove the 2 Screws. <N9>

<N3>

<N9>

7. Disconnect the Cable from the Connector. (CN15)

8. Remove the BAT FPC Ass'y.

Plate

Antenna PCB

9. Remove the 3 Screws. <N19>

<N3>

10. Disconnect the Cable from the Connector (CN21), and

remove the SD PCB Ass'y.

<N3>

<N19>

Wireless Module

<N19>

DIMM Holder

<N19>

Modem PCB

Connector(CN3)

gray cable

black cable

white cable

2. Remove the gray, black and white Antenna Cables.

3. Remove the 2 Screws <N3> and the 3 Screws <N9>.

4. Remove the 2 screws <N3>, and remove the DU PCB,

Plate and Antenna PCB.

Coin Battery

11. Disconnect the Cable from the Connector (CN3), and

remove the Coin Battery.

12. Remove the 2 Screws <N19>, and remove the Wireless

Module.

13. Remove the 2 Screws <N19>, and remove the Modem

PCB.

26 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

14. Remove the 2 Screws <N19>, and remove the DIMM

Holder.

Screws <N2> : DFHE5058ZB

Screws <N9> : DRSB2+5FKL

9.1.11. Removing the Power SW PCB

Tape

<N19>

<N1>

<N19>

Connector(CN9)

<N19>

Power SW

PCB

Connector(CN14)

<N19>

Main PCB

Connector(CN23)

Combo Socket

1. Remove the Screw <N1>.

2. Disconnect the Cable from the Connector (CN9).

3. Remove the Power SW PCB.

Screw <N1> : DFHE5025XA

9.1.12. Removing the left LED and right

LED PCB

Release Paper

15. Remove the Tape.

16. Disconnect the 3 Cables from the 3 Connectors.

(CN9,CN14,CN23)

17. Remove the 7 Screws <N19>, and remove the Main PCB

and Combo Socket.

left LED PCB

Screws <N3> : DFHE5108ZA

Screws <N8> : DRSB2+10FKL

Screws <N9> : DRSB2+5FKL

Screws <N19> : XSB2+3FNL

9.1.10. Removing the I/O PCB Ass'y

<N9>

Connector(CN806)

I/O PCB Ass'y

<N9>

right LED PCB

Connector(CN801)

<N2>

1. Remove the two Release Papers.

2. Disconnect the Cable from the Connector (CN806).

3. Remove the left LED PCB.

4. Disconnect the Cable from the Connector (CN801).

5. Remove the right LED PCB.

1. Remove the 4 D-SUB Screws <N2>.

2. Remove the 2 Screws <N9>.

3. Remove the I/O PCB Ass'y.

27 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.1.13. Removing Pad PCB and SW PCB

9.1.14. Removing the Display unit

<N1>

Connector(CN807)

<N1>

Pad PCB

LCD Hinge Cover

Connector(CN805)

<N1>

1. Remove the 4 Screws <N1>.

2. Remove the LCD Hinge Cover.

1. Disconnect the 2 Cables from the 2 Connectors

(CN805,CN807).

2. Remove the 4 Screws <N1>.

3. Remove the Pad PCB.

<N9>

Hinge Cover

<N9>

SW PCB

3. Display unit is half-rotated and removes the 2 Screws

<N9>.

<N18>

Operation Sheet

<N18>

4. Remove the Operation Sheet and the SW PCB.

Screws <N1> : DFHE5025XA

4. Remove the 4 Screws <N18>.

5. Turn the computer over.

6. Remove the Display Unit.

Screws <N1> : DFHE5025XA

Screws <N9> : DRSB2+5FKL

Screws <N18> : DXYN4+J7FNL

28 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.1.15. Removing the LCD Rear Case

9.1.17. Removing Inverter PCB and LCD

Unit

<N15>

<N16>

LCD Rear Case

<N16>

Tape

<N15>

Connector

Inverter PCB

Inverter Case

Connector

<N15>

Antenna Cover

<N7>

Connector

(CN901)

TS PCB

<N7>

Connector (CN900)

<N7>

LCD Unit

Antenna Cover

<N7>

Tablet Latch Cover

1. Disconnect the 2 Cables from 2 Connectors (CN1,CN2).

2. Remove the Inverter Case and Inverter PCB.

3. Disconnect the 2 Cable from 2 connector

(CN900,CN901).

1. Remove the 8 Screws <N7> on the front side of Display

unit.

2. Remove the 8 Screws <N7> on the back side of Display

unit.

4. Remove the TS PS2 PCB, then remove the LCD unit.

3. Remove 2 Antenna Covers and Tablet Latch Cover.

4. Remove the 10 Screws <N15>.

5. Remove the 2 Screws <N16>.

6. Remove the LCD Rear Case.

9.1.18. Removing WWAN Main Antenna

PCB, LAN-Main BT Antenna PCB,

LAN AUX Antenna PCB and WWAN

AUX Antenna PCB

Screws <N7> : DRQT26+E5FKL

Screws <N15> : DXYN2+J6FNL

Screws <N16> : DXYN3+J10FNL

Pen

<K10-1-13>

WWAN Aux

Antenna PCB

<K10-1-13>

LAN-Main

BT Antenna PCB

<N1>

9.1.16. Removing the LCD Hinge

Pen Holder

<N1>

Cable

<N17>

<N1>

Holder

Cable

<N17>

Plate

Holder

Plate

LCD

Hinge

<N1>

Cable

Holder

LAN Aux

Antenna PCB

<N1>

LCD Cable

Holder

Cable Holder

Plate

Sheet

WWAN Main

Antenna PCB

<N1>

Cable

Holder

1. Remove the 2 Screws <N1>.

2. Remove the WWAN Main Antenna PCB.

3. Remove the 2 Screws <N1>.

4. Remove the LAN-Main BT Antenna PCB.

5. Remove the 2 Screws <N1>.

6. Remove the LAN AUX Antenna PCB.

7. Remove the 2 Screws <N1>.

8. Remove the WWAN AUX Antenna PCB.

9. Remove the Pen

10. Remove the two Screws <N6>.

11. Remove the Pen Holder.

1. Remove the Cable Holder.

2. Remove the 2 Screws <N17>.

3. Remove the Cable Holder Plate and LCD Hinge.

Screws <N17> : DXYN3+J8FNL

Screws <N1> : DFHE5025XA

Screws <N6> : DRHM5025YA

29 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.1.19. Removing the Each Cover

<N6>

DC IN LID Rubber

USB LID Rubber

LAN LID Rubber

Moden/LAN LID Rubber

<N6>

<K12-16>

<N6>

<K12-16>

Serial

LID Rubber

<K12-16>

Battery

LID ASS'Y

HDD LID ASS'Y

Audio

LID Rubber

USB Back

Rubber

RGB

LID Rubber

PCMCIA LID ASS'Y

1. Remove the 14 Screws <N6>.

2. Remove the Modem/LAN LID Rubber, LAN LID Rubber,

USB

LID Rubber, DC IN LID Rubber, Serial LID Rubber, RGB

LID Rubber, Audio LID Rubber and USB Back Rubber.

3. Remove the Rear Cabinet.

(Refer to 7.1.5 Removing the Rear Cabinet)

4. Remove the 6 Screws <K12-16>.

5. Remove the Battery LID ASS'Y, HDD LID Ass'y and

PCMCIA LID Ass'y.

Screws <K12-16> : DRQT26+D3FKL

Screws <N6> : DRHM5025YA

30 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2. Reassembly Instructions

9.2.1.

Attention when CF-19 series is repaired

ï Please execute writing BIOS ID when you exchange the Main Board.

ï Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.

9.2.2.

Setting up the Inverter Ass'y and LCD UNIT

1. Set the LCD UNIT to the LCD Front Cabinet/TS Panel.

2. Set the TS PCB on the LCD Back Damper, and connect

the 2 Cables to the Connectors (CN900 and CN901).

3. Set the Inverter PCB to the LCD Back Damper, and con-

nect the 2 Cables to the Connectors.

Tape

Connector

Inverter PCB

Inverter Case

Connector

(CN901)

TS PCB

Connector (CN900)

LCD Unit

■ Assembly of LCD Back Damper (Applicable Model : Touch Screen Model)

Detail of "D"

1mm

Detail of "B"

1mm

Detail of "C"

1mm

0.5mm

Pass the Cable

under the protrusion.

Pass the Cable

through the space.

Pass the Cable

under the protrusion.

0.5mm

1.5mm

LCD Back Cushion S

LCD Back Cushion L

LCD Back Cushion S

Note: Apply the load to attach. 20 to 30N (2.0 to 3.0 Kgf)

Order of fixing

33 35mm

Detail of "A"

0.5mm

Remove the Release Paper on

the back side and attach it.

4mm

Holder Sheet

Lengthwise : Match to the LCD Frame.

Crosswise : Match to the middle line.

Holder Sheet

LCD Side Cushion A

Attach to the side surface if the Frame.

(Match to the end of the Frame within

0 to 0.5 mm at the far side.)

Match both Holder Sheet and LCD

Back Cushion S to the right edge

of the frame. (0 to 0.5 mm)

Match both Holder Sheet and LCD

Back Cushion S to the right edge

of the frame. (0 to 0.5 mm)

LCD PWB Spacer Ass'y

Insert this between LCD

PCB & LCD Frame.

Screw 2

Screw the board and

the Spacer together.

Screw 1

Screw the board and

the Spacer together.

LCD Side Cushion D

LCD Side Cushion C

LCD PWB SPACER ASSY

Spacer Sheet

0.5mm

Spacer Sheet

0.5mm

LCD PCB Spacer

Asymmetric Shape

0.5mm

31 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of LCD Back Damper (Application Model : Digitizer Model)

0.5mm

35mm

Remove the Release Paper on

the back side and attach it.

LCD Back Dumper

Digitizer PCB Ass'y

PCB

Lengthwise : Match to the LCD Frame.

Crosswise : Match to the middle line.

Attch to the side surface

of the Frame.

Match to the end of the

Frame within 0 to 0.5 mm

at the far side.

Ensure the connector

is connected securely.

10 2mm

Screw the Board together

0.5mm

■ Assembly of Inverter PCB

Confirm the direction of the

Inverter Case Bottom

Inverter board when attaching.

Insert it as the protrusion of

the Inverter Case Upper come

to the gap side of INverter MIl Cover.

Do not press the

piezoelectric transformer.

Important Parts

for Safety

Insert from the direction

of hole and notch.

Inverter MIL Cover

Inverter

4mm

Remove the Release Paper,

and then attach the Inverter.

MIL Sheet

Wrap the Sheet to

overlap it on the side.

Set the Inverter Case Bottom to make it outside.

32 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Inverter PCB (Applicable Model : Touch Screen Model)

Avoid any stress on the Cable when

connecting the CCFL Cable.

Hold the Connector part when

connecting/disconnecting.

Attach it to the Connector and FPC.

LCD Side Cushion E

Connector

PWB

FPC

Insert it between the ribs.

(Fit to the Cabinet.)

Cushion High

Insert it between the ribs.

(Fit to the Cabinet.)

LCD Side Cushion E

Voltage Label

TS PWB

LCD Side Cushion F

Insert it between the ribs.

(Fit to the Cabinet.)

Insulation Parts

Connect

3mm

Inverter Ass'y

Confirm the direction of the Inverter board when attaching.

Inverter Mil Sheet

30 35mm

LCD Ass'y

Inverter Ass'y

Connect the Cable to the

Tape

left and right Connectors.

The gap side is front.

Inverter Ass'y

0.5mm

Sub material: Pet Tape 1

Attach the Inverter Ass'y in the

middle of right and left.

Attach the surplus of the right and left sides on the

Back Dumper as shown below and overlap on the

CCFL Cable. Attach the Pet Sheet over the Core.

Details of "A"

Avoid any stress on the Cable

when connecting it.

Hold the Connector part when

connecting/disconnecting.

Ensure the edge of the

conductive fabric is not

frayed.

Details of cable

Note for attaching Conductive Tape

Conductive Tape

LCD Cable TS

Wind round the LCD Cable

a few times and attach it.

Sield Sheet

Inverter Ass'y

LCD Back Dumper

Fix the two Cables

and connector.

Avoid getting under the Sheet.

4mm

Insulation Parts

2mm from the

branch point

Connect

Conductive Tape

Avoid any stress on the Tab part of the

LCD Module because the line comes off.

Wrap over the Antenna Cable

Cushion and the Cable.

Wrap of Antenna Cable

Cushion E

Attach coming over the end of steel plate by 1 to 2 mm.

Avoid running over the rib

1mm

Safety Working

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

33 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Inverter PCB (Application Model : Digitizer Model)

Inverter Ass'y

LCD Back Dumper

Details of cable

Conductive Tape

Attach coming over the end of steel plate by 1 to 2 mm.

Avoid running over the rib

Safety Working

1mm

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

34 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Touch Screen (Applicable Model : Touch Screen Model)

Details of "A"

Back Side

0.5mm

Touch Screen Ass'y

Protect Sheet

Laminate

TS FPC

Spacer

Attach it to the front side.

(Using the jig)

Dimensional tolerance: 0.2

(Note)

Apply the load 20 to 30N (2.0 to 3.0 Kgf) to the Cushions.

T/S

0.5mm

Laminate

T/S

Match to the wall of the

Cabinet. 0 to 0.5 mm

Touch Screen

TS Spacer A

1mm

Attach the surface to the LCD Front.

Match to the marking line.

0.5 mm

TS Spacer B

Avoid running over.

Ensure 4 and 5 do not run over the display side.

LCD Side Cushion B

Touch Screen Ass'y

TS Spacer A

1mm

Match to the marking line.

0.5 mm

1mm

35 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Glass (Applicable Model : Digitizer Model)

9.2.3.

Assembling the WWAN Main Antenna PCB, LAN-Main BT Antenna PCB, LAN AUX

Antenna PCB, WWAN AUX Antenna PCB and Pen holder

1. Fix the Pen Holder using the 2 Screws. <K10-1-13>

2. Attach the Pen.

3. Fix the WWAN AUX Antenna PCB using the 2 Screws.

Pen

<K10-1-13>

WWAN Aux

Antenna PCB

LAN-Main

BT Antenna PCB

<N1>

Pen Holder

<N1>

4. Fix the LAN AUX Antenna PCB using the 2 Screws. <N1>

5. Fix the LAN-Main BT Antenna PCB using the 2 Screws.

<N1>

6. Fix the WWAN Main Antenna PCB using the 2 Screws.

<N1>

Screws <N1> : DFHE5025XA

Screws <K10-1-13> : DRHM5025YAT

LAN Aux

Antenna PCB

<N1>

WWAN Main

Antenna PCB

<N1>

36 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Line Processing of Antenna Cable

Safety Working

Details of "B"

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

Avoid running over

the rib, etc..

CAUTION

Note: Avoid any stress on the solder.

Match to the edge of Cabinet

Screw

EVDO/EDGE Antenna

Cable Cushion Attachment Method

(3 Places)

Insert it between the wall and the rib after attaching.

Details of "A"

Bundle and wind 3

antenna cables.

LAN Main

/BT ANT

Cable Cushion

Details of "D"

Avoid running over the rib, etc..

Avoid running over

the rib, etc..

Screw

Insert it between the pins.

Hook it.

Match to the

edge of Cabinet

Screw

Put the Cable on each hook

Screw

LAN-AUX ANT

EVDO-AUX

Screw

Match to the edge of Cabinet

Screw

Match to the

Details of "D"

edge of Cabinet

Put the Cable on each hook

Avoid running over

the rib, etc..

Tape Pen Holder

Cable Cushion

Put the center of Cushion between the ribs.

9.2.4.

Setting up the LCD Hinge

1. Wind the Cable coming out of the LCD Unit counterclock-

Cable

<N17>

wise to the LCD Hinge.

Holder

Plate

Cable

<N17>

2. Set the Lock Plate and the Hinge Top Cover, and rotate

the LCD Hinge to turn the Display Unit to front

3. Put the LCD Cable and the Antenna Cable in the Cable

Holder.

Holder

Plate

LCD

Hinge

Cable

Holder

4. Fit another Cable Holder and clamp the Cable Holders in

the LCD Hinge.

5. Fix the LCD Hinge using the 2 Screws <N17> and the 2

Cable Holder Plates.

LCD Cable

Holder

Cable Holder

Plate

Sheet

Cable

Holder

Screws <N17 > : DXYN3+J8FNL

37 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of LCD Hinge

Ensure the "C" side comes

to the lower right corner

when viewing from above.

Using the fixing jig when fixing the Hinge

Fix Fix

Initial Condition

of LCD Hinge

Cable Hold Plate

Tighten

Screw

If you arrange the Cable in the area,

you do not need to use the fixing jig.

Avoid catching the Cable.

LCD Hinge

Rotation Direction

Screw

Avoid catching the Cable (when repairing or when not using the jig).

Temporarily fix the both sides ("A") of the Hinge using the Screw, and fix the Cable Hold Plate.

After fixing the Cable Hold Plate, remove the screws from the both sides ("A").

Safety Working

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

38 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Line Processing of Antenna Cable and LCD Cable

Safety Working

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

Step2

Step1

Cable Holder

Install the Holder and Cable guide on the Hinge as shown in figure.

Cable Holder

Insert the cables into the Cable Holder as shown in figure.

<CAUTION>:Position of the Antenna Cables

Right side of LCD Cable:White/Gray

Cable Guide HInge

Left side of LCD Cable:Blue/Black/Brown

It prevents to break of the cable

Keep margin in cable length

Step3

LCD cable proccess space

ANT cable proccess space

Step4

Red marking is

on the holder

Wrap (one round) only the Antenna Cables around

the axis of the Hinge as shown in figure.

Note: Handle LCD cable as show in figure. LCD cable

must not intersect with Antenna Cables.

Black marking is

on the holder

Fit Holders as shown in figure

(Until you hear the click)

CAUTION:Check the position of the Cables

Watch out is the cable comes off from the holder

for cable is not scissored between the holder and hinge.

Step6

Step5

It prevents to

break of the

cable

Next, wrap (one round) the LCD Cable around

the axis of the Hinge as shown in figure.

The antenna cables must not intersect with the LCD cable.

39 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.5.

Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case

1. Fix the LCD Rear Case using the 10 Screws <N15> and

the 2 Screws. <N16>

2. Attach the Antenna Covers and the Tablet Latch Cover to

the Display Unit.

3. Tighten the 8 Screws <N7> on the back of the Display

<N15>

<N16>

LCD Rear Case

<N16>

<N15>

Unit.

4. Turn the Display Unit over, and tighten the 8 Screws.

<N7>

<N15>

Antenna Cover

<N7>

Screws <N7> : DRQT26+E5FKL

Screws <N15> : DXYN2+J6FNL

Screws <N16> : DXYN3+J10FNL

<N7>

Antenna Cover

<N7>

Tablet Latch Cover

■ Assembly of LCD Front Case

Do not use if the protrusion such as painting lump exists around D5.

(Due to affect the Touch Screen operations.)

Insert it between the ribs, and attach it.

LCD Front Assy

Magnet Ass'y

0.5mm

Magnet Tape

1mm

Magnet

1mm (Both on the top and the side)

Avoid running over

Tape

Note for attachment

Avoid running over the display part.

Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).

Attach here Position of pasting D.

0.5mm

Fit to the rib

0.5mm

40 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of LCD Rear Case (Applicable Model : Touch Screen Model)

(Note)

Arrow without specified measurement: 0 to 0.5 mm

Allowable right/left displacement of the Cushion: max. 0.5 mm

Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).

LCD Rear Cushion A

0.5mm

Marking line

0.5mm

Marking line

0.5mm

LCD Rear Cushion G

LCD Rear Assy

LCD Rear Cushion G

LCD Rear Cushion K

Marking line

0.5mm

Marking line

1mm

LCD Rear Cushion C

LCD Rear Cushion E

LCD Rear Cushion D

■ Assembly of LCD Rear Case (Applicable Model : Digitizer Model)

(Note)

Arrow without specified measurement: 0 to 0.5 mm

Allowable right/left displacement of the Cushion: max. 0.5 mm

Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).

LCD Rear Cushion A

0.5mm

Marking line

0.5mm

Attach it between marking lines.

0 to 1 mm from one of the lines.

0.5mm

LCD Rear Cushion C

Marking line

0.5mm

LCD Rear Ass'y

Marking line

0.5mm

LCD Rear Cushion J

LCD Rear Cushion E

LCD Rear Cushion J

3mm

LCD Rear Cushion E

LCD Rear Cushion C

LCD Rear Cushion D

LCD Rear Cushion C

41 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Tablet Latch Cover and Antenna Cover

Press and hold it against the cabinet,

and fix it using the Screw.

Tablet Lacth Cover

Antenna Cushion L

Attach it matching to the silk to put the

two-sided tape on the Antenna side.

Antenna Cover

Press and hold it against the cabinet,

and fix it using the Screw.

Screw Locations

10 Places

16 Places

Screw

Fix in the order.

the front side as well,

8 screws each side

Antenna Cover

Do not forget fixing with screws.

Press and hold it against the cabinet,

and fix it using the Screw.

Screw

42 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.6.

Setting the Display Unit

1. Fix the Display Unit using the 2 Screws <N9>.

2. Close the Display Unit and turn the computer over, then

fix the Display Unit using the 4 Screws <N18>.

<N18>

3. Turn the computer over and fix the LCD Hinge Cover

using the 2 Screws <N1>.

<N9>

Hinge Cover

<N9>

4. Open the Display Unit and fix the LCD Hinge Cover using

the 2 Screws <N1>.

<N1>

Screws <N1> : DFHE5025XA

Screws <N9> : DRSB2+5FKL

Screws <N18> : XYN4+J7FNL

LCD Hinge Cover

<N1>

43 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Display Unit

Safety Working

Note

Avoid any stress on the Cable.

Details of "A"

Screw

Order of fixing

Screw Screw

Screw

Pass the Cable through

the groove.

Note: Running over

affects the waterproof

performance..

Close the LCD hooking the

Hinge on the Top Case, and

then fold back.

Brown

Blue/Gray

LCD UNIT

Black/White

Set to the Top Case Assy

Insert all of antenna cables

into the notch of the board.

LCD Cable Insert Position

44 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.7.

Setting the Pad PCB and SW PCB

1. Attach both the SW PCB and the Operation Sheet to the

Cabinet.

SW PCB

Operation Sheet

<N1>:No.3

2. Connect the 3 Cables to the 3 Connectors.

(CN800,CN805,CN807)

<N1>:No.2

<N1>:No.1

Connector(CN807)

3. Fix the Pad PCB using the 4 Screws. <N1>

Note:

Tighten the Screws in the numbered order (No1 to

<N1>:No.4

Connector(CN805)

Pad PCB

No4).

Screws <N1> : DFHE5025XA

45 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of the Pad PCB and SW PCB

(Note) Arrow without specified measurement: 0 to 0.5 mm

PAD PWB ASSY

PAD PWB

LED(R) FPC

SW FPC

Insert

PAD MAIN FPC ASSY

No direction when inserting

Back side

Power SW Cable

Insert

Power Cable Cushion

Wrap around the Cable.

Use the fixing JIG for the pressured portion

when the cables are inserted.

2mm

Thermistor

Insert to the connector

PAD MAIN FPC Ass'y

PAD-Main FPC

SW PCB Ass'y

Ensure that the direction

is right when attaching.

The Connector bracket is

on the back side.

Operation Tape

Stiffening Plate Side

Match the edge

and attach it.

Fold back

Tape

1mm

SW PCB

1mm

Operation

Sheet

Avoid coming off of the LED part,

or running over the LED part.

■ Putting of the TP Bottom Tape

SW PCB Ass'y

Front side

Match to the upper left corner. 0 to 0.5mm

Screw

9.2.8.

Setting the left LED PCB and right LED PCB

1. Connect the Cable to the Connector. (CN806)

2. Fix the left LED PCB.

Release Paper

3. Connect the Cable to the Connector. (CN801)

4. Fix the right LED PCB.

5. Attach the two Release Papers.

6. Attach the Palm Rest Ass'y.

left LED PCB

Connector(CN806)

right LED PCB

Connector(CN801)

46 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of the left LED PCB and right LED PCB

LED(L) PCB Ass'y

LED(R) PCB Ass'y

LED Light Guide Sheet(R)

Match the edge and attach it.

LED PCB(L)

LED Light Guide Sheet(L)

Match the edge and attach it.

Avoid running over the LED.

LED PCB(R)

Back side

3mm

LED PWB Tape(R)

Match the edge and attach it.

LED PCB Tape(L)

LED(L) FPC

Match the edge and attach it.

Ensure it does not come over the end

of the Board by 0.5 mm or more.

Avoid coming over it.

9.2.9.

Setting the Power SW PCB

<N1>

Connector(CN9)

1. Connect the Cable to the Connector. (CN9)

2. Fix the Power SW PCB using the Screw. <N1>

Power SW

PCB

Screws <N1> : DFHE5025XA

■ Assembly of the Power SW PCB

(Note) Arrow without specified measurement: 0 to 0.5 mm

Power SW PCB

1mm

Power Spring Sheet

Attach

Insert

Safety Working

Spring

Insert it to Knob and

Pin on the Top Case

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

Insert the Cushion

between the ribs.

Avoid coming over

CAUTION

Screw

Fold the board back and fix with screw.

47 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.10. Setting the I/O PCB Ass'y

1. Fix the I/O PCB using the 2 Screws. <N9>

2. Fix the I/O PCB using the 4 Screws. <N2>

<N9>

I/O PCB Ass'y

<N9>

Screws<N2> : DFHE5058ZB

Screws<N9> : DRSB2+5FKL

<N2>

9.2.11. Setting the Main PCB, Wireless Module, SD PCB, DU PCB, Antenna PCB and

Modem PCB

1. Fix the Main PCB using the 7 Screws <N9>.

2. Connect the 3 Cables to the 3 Connectors.

Tape

<N19>

(CN9,CN14,CN23)

3. Attach the Tape.

:No5

<N19>

Tape

<N19>

:No4

<N19>

:No6

Connector(CN9)

<N19>

:No2

<N19>

:No1

Connector(CN14)

<N19>

:No7

Main PCB

Connector(CN23)

Combo Socket

48 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Fix the Modem PCB using the 2 Screws <N19>.

5. Fix the Wireless Module using the 2 Screws <N19>.

6. Fix the DIMM Holder using the 2 Screws <N19>.

7. Attach the Cable to the Connector (CN3) and attach the

Coin Battery.

<N19>

Wireless Module

<N19>

DIMM Holder

<N19>

Modem PCB

Connector(CN3)

Coin Battery

8. Fix the SD PCB Ass'y using the 3 Screws <N19>.

9. Attach the Cable to the Connector (CN21).

10. Hook the Flex Cable on the DIMM Holder, and turn 90

degrees.

11. Fix the BAT FPC Ass'y using the 2 Screws <N9>.

12. Connect the cable to the Connector. (CN15)

13. Fix the HDD Connector Guide using the 2 Screws <N8>.

<N8>

HDD

Connector Guide

<N19>

Connector

(CN882)

<N9>

SD PCB Ass'y

BAT FPC Ass'y

Connector(CN15)

49 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

14. Fix the DU PCB and the Plate using the 2 screws <N3>.

15. Fix the DU PCB Ass'y and Antenna PCB using the 3

screws <N9> and the 2 screws <N3> .

DU PCB

<N3>

<N9>

16. Connect the white, black and gray Cables.

Plate

Antenna PCB

<N3>

gray cable

white cable

black cable

17. Turn the computer over, open the Display Unit, and then

connect the 2 LCD Cables. (CN8,CN17)

Note:

Tighten the Screws in the numbered order (No1 to No7).

Screws <N3> : DFHE5108ZA

Screws <N8> : DRSB2+10FKL

Screws <N9> : DRSB2+5FKL

Screws <N19> : XSB2+3FNL

Connector(CN8)

Connector(CN17)

50 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Main PCB

Process in the order of 1

Do not cover the screw

Fold the tape

Turn over

Do not cover the MODEM cable

and Tape to the screw land

Setting the MODEM label

to the line

Electric wire of the cabel is not

sticked out from the black tape.

Tape portion can be sticked out.

Safety Working

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

51 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

52 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of Main Unit

Screw

Insert and then lock.

Main PCB Ass'y

Connect

Audio FPC Ass'y

Stiffening Plate Side

Audio FPC

Audio FPC Ass'y

Insert it before setting

the Main Board.

Lengthwise

Attach it on the

center of the

FPC.

DU PCB ASSY

3mm

Screw

Tape

Screw

Fold back

Screw

1mm

Apply the lubricant (sub material) on the

HDD Connector for about 1 second.

(Note for spraying around when applying.)

Screw

Round to make the brown side

outside and insert the notch.

Screw

Thermal Sheet

Center of module

to the notch

Wireless Module

Screw

Safety critical componentInsert

and then lock.

Important Parts

for Safety

Insert and then lock

Safety Working

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

53 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Thermal Rubber

Screw

HDD Connector Guide

Screw

SD PCB Ass'y

Screw

Ensure that the knob is fit to SW when setting.

DIMM HOLDER Ass'y

Screw

RF SW Knob

Insert the hook

DIMM Holder

Screw

Insert the FPC

Detail of portion A (assemble the LAN/MODEM HOLDER)

Safety Working

LAN/MODEM HOLDER

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

Put the claw under the

MAIN PCB.

Figure from oblique view

Put the cables into the hollow

space of the HOLDER.

54 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Insert the end of the Sheet into the space between the Main

Board and the bottom of the PCMCIA Slot.

(Left and Right 0.5mm, Apply 20 to 30N (2.0 to 3.0 Kgf))

Ensure that both top and

bottom are hooked.

Attach it fitting to the right

0.5mm

Screw

0.5mm

Battery FPC Ass'y

Slide surface

Screw

SD Blind Sheet

Insert the FPC as illustrated

9.2.12. Setting the Audio PCB

1. Connect the Cable to the Connector. (CN901)

2. Fix the Audio PCB using the 3 Screws. <N9>

Note:

<N9>:No1

<N9>:No.2

<N9>:No.3

Audio PCB

Tighten the Screws in the numbered order (No1 to No3).

Connector(CN901)

Screws <N9> : DRSB2+5FKL

55 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.13. Setting the HSDPA PCB and Bluetooth PCB

1. Fix the Plate and Bluetooth PCB using the 2 Screws

<N19>.

<N19>

2. Connect the Cable to the Connector. (CN1)

3. Connect the Cable to the Connector. (CN604)

4. Fix the Plate and the Board using the 4 Screws <N19>.

5. Attach the blue Antenna Cable to the Clamper.

Bluetooth PCB

Plate

Antenna Cable(blue)

Clamper

<N19>

:No.4

<N19>

:No.1

<N19>

:No.2

<N19>

:No.1

6. Connect the Cable to the Connector. (CN600)

7. Fix the RF PCB Ass'y using the 4 Screws. <N9>

8. Attach the Tape.

9. Attach the brown and black Antenna Cables.

10. Attach the Cable Holder Cushion.

Tape

<N9>

Antenna Cable(brown)

Antenna Cable(black)

<N9>

HSDPA PCB

Screws <N9> : DRSB2+5FKL

Screws <N19> : XSB2+3FNL

Connector(CN600)

Cable Holder Cushion

56 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Line Processing of Antenna Cable of Main Unit

Cable Process 1/3

Place brown/blue/gray cables at left and

white/black cables downward.

After connecting the black antenna cable,

connect it into the Holder as illustrated.

After connecting the white antenna cable,

connect it into the Holder as illustrated.

Safety Working

Connect the blue antenna cable.

S1:Insulation S2:Pinching Cables S3:Sharp Edge

S4:Part No. Check S5:Others

CAUTION

Attach side

Cable Process 2/3

SHEET

Insert it into the right

notch of the Clamper.

If the fixing is not incorrected, there is possibility

Remove the release paper

and attach it.

that the cable is scissored between the PCB and the both.

To prevent from the cable

damaged by screw head.

Insert the FPC,

Lock Check

Check the blue cable from the hole.

0-2mm

TAPE

2-5mm

Process the grey cable to the

same direction with the brown cable

After processing the cables, inserting the FPC and locking,

incline the Audio PCB into the arrow direction.

Connect the FPC

After confirming the cable is not under the AUDIO PCB

(processed at the Step 4), tighten the Screws.

Because there is a possibility that the cable is scissored

between PCB and the both.

SHEET

Attach side

Screw

Remove the Release Paper

and attach it.

Screw

To prevent from the cable

damage by screw bead.

57 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 14

Step 12

Cable Holder Cushion

Insert it into the boss.

(Push it downward from the top of boss.)

Connect the brown antenna cable.

Step 13

Cable

Connect the additional cable (black).

Cable Holder Cushion

Cable Process 3/3

Insert it into the boss.

(Push it downward from the top of boss)

Connect the grey antenna cable

Connect the brown antenna cable

58 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.14. Assembling the DU Lid Unit

1. Fix the DU Lid Angle and the DU Lid using the 7 Screws.

<K14-9>

Screws <K14-9> : DXQT2+D25FNL

<K14-9>

DIMM Lid Angle

DU Lid

9.2.15. Setting the Rear Cabinet

1. Fix the Rear Cabinet on the Computer using the 13

Screws. <N10>

<N10>

:No.3

<N10>

:No.11

2. Close the Lid Covers.

<N10>

:No.12

Note:

:No.9 :No.7

Tighten the Screws in the numbered order (No1 to No13).

<N10>

:No.5

<N10>

:No.10

<N10>

:No.2

<N10>

:No.1

<N10>

:No.13

Screws <N10> : DRHM0061ZA

<N10>

:No.6

<N10>

:No.8

<N10>

:No.4

59 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Cautions for Setting the Rear Cabinet

Match to the circles. 0 to 1mm

Match to the wall.

0 to 1mm

Match to the wall.

0 to 1mm

1mm

(Note) Arrow without specified measurement: 0 to 0.5 mm

Bottom Case Ass'y

Bottom Rubber

Tape

Potre Blind Sheet

Bottom Rubber

Rated Label

Important Parts

for Safety

Safety critical component

Note for attachment

Avoid running over the frame.

Avoid air leaking into it.

DIMM Thermal Sheet

Match to the marking line and attach it.

Bottom Rubber

Tape

Bottom Rubber

Bottom Case Assy

9.2.16. Setting the DIMM Lid Ass'y

1. Fix the DIMM Lid Ass'y using the 4 Screws. <K14-8>

<K14-8>

Screws <K14-8> : DRHM5025YAT

<K14-8>

DIMM Lid Ass'y

60 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.17. Setting the Touch Pad and Keyboard

1. Connect the Cable to the Connector (CN800), and attach

the Touch Pad to the computer.

7. Set the Keyboard to the computer.

2. Set the Click Button Plate.

3. Attach the new TP Tape over the Touch Pad.

4. Attach the Palm Rest Ass'y on the computer.

Keyboard

FPC

TP Tape

Touch Pad

Click Button

Plate

Keyboard

8. Fix the KBD Plate using the four Screws. <N9>

KBD Plate

<N9>

KBD Plate

<N9>

Palm Rest Ass'y

<N9>

Connector

(CN800)

(CN18)

5. Connect the Cable of the Keyboard to the Connector

(CN18) on the Main PCB.

6. Fix the KBD Connector Cover using the three Screws.

<N1>

Screws <N1> : DFHE5025XA

Screws <N9> : DRSB2+5FKL

KBD

Connector

Cover

61 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Putting of the Sheet

LCD Cushion Sheet

Ensure it does not come

over the end of the rib.

LCD Cushion Sheet

Ensure it does not come

over the end of the rib.

0.5mm

Gasket E

The paste should be

put the left side.

Fit to the wall of the end side, and

put the surplus to the Cabinet side.

0.5mm

KB CNT Hole Cushion

0.5mm

KBD Waterproof Sheet C

Match to the circles.

0 to 0.5mm

Avoid coming over.

0 to 0.5 mm

Avoid coming over.

0 to 0.5 mm

Avoid coming over.

0 to 0.5 mm

Avoid running over.

0.5 to 1mm

Avoid running over.

0.5 to 1mm

Palmrest Waterproof Sheet L

Attach it using the jig

Palmrest Waterproof Sheet R

Attach it using the jig

Click Button Plate

0.5mm

0.5 1.5mm

Fold over the front and attach it.

Attach it using the jig

TP Tape

Fold over the front and attach it.

Avoid running over other sheets.

Because the sheets described on this page are waterproof sheets,

the whole parts should be put pressure after attaching.

(Especially, put pressure around the sheets.)

*Apply the load to attach.

30 to 40N (3.0 to 4.0Kgf)

■ Cautions for Setting the Keyboard

Order of fixing

Screw Screw

Screw

62 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Putting of the Palm Rest ASSY

7mm

5mm

8mm

Intel Label

Windows Logo Label

8mm

6mm

Energy Star Label

Remove the Release Paper, and then attach the Palmrest Assy.

Remove the two-sided tape on the back side and attach it.

After attaching, press by the load 30 to 40N (3.0 to 4.0 Kgf).

Palmrest Assy

Set the five Hooks.

Remove the Release Paper.

■ Putting of the KBD Tape

0 to 2 mm from

the protrusion

0 to 2 mm from the

notch bottom edge

0 to 2 mm from

the protrusion

0 to 2 mm from

the protrusion

Keyboard

Ensure the direction is right.

KBD Tape

0 to 2 mm from

the protrusion

0 to 2 mm from the

notch bottom edge

0 to 2 mm from the

notch bottom edge

0 to 2 mm from

the KBD edge

63 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.18. Setting the Battery Pack and the HDD Pack

1. Set the HDD in the HDD Case and fix it using the 2

Screws. <N13>

HDD Case B

Hooks

HDD FPC

HDD

Heater

<N13>

HDD Case A

2. Open the HDD Cover and set the HDD Pack.

3. Open the Battery Cover and set the Battery.

Screws <N13> : DXQT2+D4FNL

HDD Pack

Battery Pack

64 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Assembly of the HDD ASSY

0.5mm

Note for the Heater top end location

1mm

Avoid any stress

10 15mm

Insulation Parts

Safety Working

Heater Ass'y

Heater

Insulation Parts

1mm

Heater Assy

Back

2mm

Sub material: Pet Tape 1

(19mm width x 4 cm)

HDD

Heater Insulation Sheet

Attach on the inside of 1

FPC(HDD)

Connect the Connector

Round to make the brown side

outside and insert the notch part

Details for attachment of Heater Insulation Sheet

Thermal Sheet

2mm

Two-sided Tape

Come the bottom over by 0 to 0.5 mm.

Attach it on the center of the HDD.

3mm

Revision Label Matches to

Match to the level.

0 to 1 mm

the center

2mm

Attach on the inner side

of the HDD Case A

HDD Case Lower

HDD Case Tab

0.5mm

Screw

HDD Case Lower

HDD Connector Guard

Screw

HDD Damper

HDD Case Upper

Production

FPC Connector

Insulation Sheet

Make the Hook inside

Attach

Remove the

Release Paper

Hook it

65 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.19. Assembling the Each Cover

1. Fix the Battery LID Ass'y, the HDD LID Ass'y, and the

PCMCIA LID Ass'y using the 6 Screws. <K12-16>

2. Set the Rear Cabinet.

<N6>:No.6

<N6>:No.5

<N6>:No.4

<N6>:No.3

<N6>:No.2

<N6>:No.1

3. Fix the Modem/LAN LID Rubber, the LAN LID Rubber, the

USB LID Rubber, the DC IN LID Rubber, the Serial LID

Rubber, the RGB LID Rubber, the Audio LID Rubber and

USB Back Rubber using the 14 Screws. <N6>

DC IN LID Rubber

USB LID Rubber

LAN LID Rubber

Moden/LAN LID Rubber

<N6>

Note:

<N6>

:No.12

<N6>

:No.14

Tighten the Screws in the numbered order (No1 to No14).

:No.13

:No.11

<N6>

:No.10

<K12-16>

:No.9

<N6>

:No.8

Screws <K12-16> : DRQT26+D3FKL

Screw <N6> : DRHM5025YA

<N6>

:No.7

<K12-16>

Serial

LID Rubber

<K12-16>

Battery

LID ASS'Y

HDD LID ASS'Y

Audio

LID Rubber

USB Back

Rubber

RGB

LID Rubber

PCMCIA LID ASS'Y

66 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Exploded View

K82

K83

K81

E24

K30

K3-1

K31

K144

K3-2

K115

K144

K163

K144

K114

K116

K34

E32

K39

K111

K109

K124

N11

K100

K107

K113

K110

N11

K102

K127

K1603

K110

K1604

K80

K80-8

K80-11

K80-1

K80-9

K80-12

K80-6

K80-10

K80-5

K80-7

K80-4

K80-8

Screw tightening torque

K80-3

A 0.2 _ 0.02N m

(2.0 _ 0.2kgf cm)

F 0.8 _ 0.02N m

E23

(8.0 _ 0.2kgf cm)

K80-2

CF-19FHGAXxM

67 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K1610

K12-15-10

K12-15-1

K12-15-4

K12

K12-15-5

K12-15-3

K12-16

K12-15-6

K12-15-10

K12-14-8

K12-14-9

K12-15-1

K12-15-2

K12-14-10

K12-14-2

K12-16

K12-15-9

K12-15-11

K12-15-12

K12-15-7

K12-14-9

K12-14-7

K112

K12-15-8

K12-15-9

K12-14-1

K12-14-12

K12-14-11

K12-15

K12-16

K12-14-3

K12-10

K12-8

K12-7

K12-14-6

K12-14-1

K12-14-5

K12-14-11

K12-3

K12-9

K12-16

K162

K40

K12-14-4

K12-14

E25

K117

E34

K104

N14

K12-1

E407

K12-2

K12-10

K90

K120

K13

K12-12

K118

K12-6

K12-1

K108

K13-3

K13-5

K12-13

K12-13-11

K12-13-9

N14

K12-13-2

K13-6

K12-13-8

K12-13-9

K12-13-7

K101

N18

K13-4

K103

K13-1

K13-8

K12-5

K49

K41

K12-13-1

K13-2

K13-7

K12-13-6

K12-13-3

K12-13-10

K133

K12-17

K12-4

K12-11

K12-16

K12-13-1

K12-3-5

K12-3-10

Screw tightening torque

K12-16

A 0.2 _ 0.02N m

0.4 _ 0.05N m

0.3 _ 0.05N m

K12-3-4

(2.0 _ 0.2kgf cm)

(4.0 _ 0.5kgf cm)

(3.0 _ 0.5kgf cm)

1.50 _ 0.15N m

0.4 _ 0.02N m

B 0.3 _ 0.03N m

(3.0 _ 0.3kgf cm)

(15.0 _ 1.5kgf cm)

(4.0 _ 0.2kgf cm)

CF-19FHGAXxM

68 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

E35

K99

K98

K160

K137

A N9

K141

N19

E402

K86

E26

N19

K87

E30

N19

K1051

K38

K54

K88

E401

K54

K1249

K130

E27

K122

E29

K142

K46

K91

K121

K131

K51

E401

K161

K47

E11

N19

E405

N19

A N19

K93

K140

E12

E33

E13

K95

K94

K138

K45

N19

K95

K50

E404

K43

K96

E28

E403

K48

E10

N19

K33

A N9

K157

E20

N19

K132

K37

E14

K126

K92

K35

N9 K15

K53

K165

K22

E407

Screw tightening torque

A 0.2 _ 0.02N m

(2.0 _ 0.2kgf cm)

E406

H 0.4 _ 0.02N m

K43

E31

K42

(4.0 _ 0.2kgf cm)

E409

CF-19FHGAXxM

69 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K14

K14-9

K14-2

K14-5

K14-9

K23

K19

K24

K18

K14-3

K21

K17

K14-4

K20

K32

K27

K26

K54

K25

K14-8

K14-7

K14-8

K14-7

K16

K28

N10

K28

K54

K14-6

K16

N10

K16

K55

N10

K14-1

K16

N10

K14-1-2

K14-1-1

K85

Screw tightening torque

A 0.2 _ 0.02N m

K14-8

(2.0 _ 0.2kgf cm)

K14-8

K84

CF-19FHGAXxM

70 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K61

K10-4

K62

K10

K61

E36

K10-4-4

K10-4-1

K10-4-3

K10-4-1-1

K10-4-2

K10-4-4

K29

K158

K10-4-3

N17

K63

K58

K79

N17

K52

K79

K58

K70

K10-4-5

K159

K10-1-6

K10-1-7

K66

K67

K59

K10-1-13

K57

K10-2

K10-3

E17

K59

K10-1-11

K10-1-7

K10

-1-5

K10-

1-3

K10-1-9

K10-1-6

K10-1-3

K10-1-5

K59

K10-1-13

K54

E16

K166

K10-1-8

K10-1-1

K10-1-2

K10-1-10

K10-1-4

K10-1-12

E15

K10-1

E18

K10-1-4

Screw tightening torque

A 0.2 _ 0.02N m

(2.0 _ 0.2kgf cm)

D 0.8 _ 0.08N m

(8.0 _ 0.8kgf cm)

CF-19FHGAXxM

71 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K78

K73

K65

K72

E22

K77

K167

K76

E36

K74

E36-6

E21

E36-7

E19

E36-5

E36-6

E36-4

E36-1-3

K54

E36-1-2

E36-7

E36-1-1

E36-1

E36-3

E36-14

E36-13

E36-15

E36-3

E36-14

E36-2

E36-8

E36-13

E36-16

K66

E36-8

E36-10

E36-11

K71

E36-12

E36-11

Screw tightening torque

A 0.18 _ 0.02N m

(1.8 _ 0.2kgf cm)

CF-19FHGAXxM

72 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K68

K69

C N7

N15

K11-9

N15

K11-1-3

K11-1-1

K11

K11-10

K11-1-5

N15

K11-1

K11-1-3

K11-1-1

K11-1-4

K11-1-2

D N16

N15

N16

B N15

K11-1-4

K11-3

K11-2

K11-1-5

K11-3

K11-1-6

K11-1-2

K11-4

K11-8

K11-2

K11-8

K11-7

K11-4

K11-6

K68

Screw tightening torque

B 0.2 _ 0.02N m

(2.0 _ 0.2kgf cm)

C 0.3 _ 0.03N m

(3.0 _ 0.3kgf cm)

D 0.8 _ 0.08N m

(8.0 _ 0.8kgf cm)

CF-19FHGAXxM

73 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacement Parts List

Note : Important Safety Notice

Components identified by

mark have special characteristics important for safety.

When replacing any of these components, use only manufacturer's specified parts.

CF-19FHGAXxM

REF. NO and　OS

NRP: Non Reusable Parts

PART NO.

DESCRIPTION

Q'TY

Main Block Unit

DL31U1633AAA

DL32U1633AAA

DL33U1633AAA

DL31U1634AAA

DL32U1634AAA

DL33U1634AAA

DL34U1634AAA

DL36U1634AAA

DL37U1634AAA

DL38U1634AAA

DL39U1634AAA

DL3UP1552AAA

DL31U1635AAA

DL3UP1566AAA

DL3U11553AAA

DL3U21553AAA

DL3U31553AAA

DL3U41553AAA

DL3UP1605AAA

DFJS1060ZA

RTL

PCB, MAIN

PCB, AUDIO

PCB, IO

PCB, PAD

PCB, SW

PCB, LED-LEFT

PCB, PR

PCB, LED-RIGHT

PCB, SD

PCB, HSDPA

PCB, POWERSW

PCB, EXT ANT UNIT

PCB, BT

BAT FPC UNIT

WWAN MAIN ANT

WWAN AUX ANT

LAN-MAIN BT ANT

LAN AUX ANT

CF-19 TS PCB UNIT

WWAN COAXIAL CABLE

LCD CABLE TS

INVERTER

HARD DISK

KEYBOARD VISTA, U.S.

MODEM CABLE

MODEM

DDR2-667 200PIN SO-DIMM, 1GB

WLAN COAXIAL CABLE

WIRELESS LAN MODULE

THERMISTOR

POWER SW CABLE

TOUCHPAD

LITHIUM COIN BATTERY

LAN CABLE

EXPRESS PCMCIA COMBO SLOT

LCD UNIT ASS'Y

LCD ASS'Y

LCD BACKLIGHT, CCFGL

REFLECTION ANGLE

LCD REFLECT TAPE

LCD PWB SPACER

SPACER SHEET

E10

E11

E12

E13

E14

E15

E16

E17

E18

E19

E20

E21

E22

E23

E24

E25

E26

E27

E28

E29

E30

E31

E32

E33

E34

RTL

DFJS1117ZA

N0GB1J000019

N3CAYYY00030

N2AZZY000078

DFJS1120ZA

N5HAZ0000014

N5ZZ00000128

DFJS1059ZA

N5HZC0000031

D4CZY103A003

DFJS1043ZA

N2EABEC00006

BR-2330A/SF

DFJS1119ZA

K1NB94B00001

DFWV08A0108

DL3DW0186AAA

A2CA00000056

DFHM0290ZA

DFHR3H12YA

DFHR3612ZA

DFHR3647YA

DFHR3D92YA

DFHR3570YA

DFHR3571YA

DXHM0042ZA

DFHR3648ZA

DFHR3B64ZA

DFHR3506YA

DFHR3507YA

DFHR3G97ZA

DFHR3G99ZA

DFHR3H84ZA

DFMX0383TA

DFUP1587ZA

E35

E36

E36-1

E36-1-1

E36-1-2

E36-1-3

E36-2

E36-3

E36-4

E36-5

E36-6

E36-7

E36-8

E36-10

E36-11

E36-12

E36-13

E36-14

E36-15

E36-16

E401

E402

LCD BACK DAMPER

LCD BACK CUSHION

LCD BACK CUSHION S

SCREW

HOLDER SHEET B

LCD SIDE CUSHION A

LCD SIDE CUSHION C

LCD SIDE CUSHION D

LCD BACK SPACER TS

LCD REAR CUSHION F

LCD REAR CUSHION I

INSULATION PARTS

FPC, AUDIO 40PIN

FPC, IO 24PIN

DFUP1588ZA

74 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

E403

E404

E405

E406

E407

E409

DFUP1644ZA

DFUP1586ZA

DFUP1645ZA

DFUP1589ZA

DFUP1591ZA

DFUP1593ZA

FPC, SD(19MK2 SD LAN 24PIN)

FPC, HSDPA 50PIN

FPC, BT(19MK2 BT FPC 10PIN)

FPC, PAD 40PIN

FPC, LED LEFT 10PIN

FPC, LED RIGHT 6PIN

Accessories

NCR-B/603A

CF-AA1633AM1

K2CG3DR00003

DFQW5088ZA

DFQW5097ZA

DFJS954ZA

DFHS9017ZA

DFQM8379MA

DFQC9006ZB-0

LITHIUM ION BATTERY PACK

AC ADAPTOR

AC CORD

OPERATING INSTRUCTIONS(CF-19MK2)

MANUAL(CF-19MK2 VISTA)

MODEM CABLE

TOUCHPANEL CLOTH

RECOVERY DVD, VISTA

SHOULDER BELT ASS'Y

A4 (A)

A4 (J)

A7 (A)

Packing Material

DFPE0733YA

DFPE0859YA

DFPK1210WA

DFPK1216YA

HOLDER

PACKING CASE

ACCESSORY BOX

Mechanical Parts

DFHM9017ZA-0

DFHR9125ZD-0

DFHR3578ZA

DFHR3580YA

DFQC9009ZC-0

DFKE9059YA

DFBH3029UA

DFME0148YA

DFKE9086ZA-0

DFWV80A0401

DFKF9033VB-1

DFJS1064ZA

L0AA04C00012

DFHG1634YA-0

DFHG1635ZA-0

DFHM0319YA

DFHM0321ZA

DFHM0322ZA

DFHM0413ZA

DFHR3469ZA

DFHR3H08ZA

DFHR6282ZB

DFKM0521VA-1

DRHM5025YAT

DFHE0805ZA

DFHP7149ZA

DFWV84A0308

DL3DV0186AAA

DFHR9071ZA

DFHR3630ZA

DFHR3476ZA

DFHR3477ZA

DFHR3464WA

DFWV80C0532

DFKM9039YA-0

DFHG1634YA-0

DFHG1635ZA-0

DFHM0319YA

DFHM0321ZA

DFHM0322ZA

DFKM0522YA-0

DFHR3J19ZA

DFHR3460YA

DFHR3567YA

EZC LID ASS'Y

PALM REST ASS'Y

PARMREST TAPE OUTSIDE

PARMREST TAPE RUBBER

STRAP BG ASS'Y

LOCK PLATE ASS'Y

HINGE

PEN TETHER

HINGE TOP COVER ASM

LCD FRONT CABINET/TS PANEL ASS'Y

LCD FRONT CASE ASS'Y TS

SPEAKER CABLE

K3-1

K3-2

K10

NRP

K10-1

K10-1-1

K10-1-2

K10-1-3

K10-1-4

K10-1-5

K10-1-6

K10-1-7

K10-1-8

K10-1-9

K10-1-10

K10-1-11

K10-1-12

K10-1-13

K10-2

K10-3

K10-4

K10-4-1

K10-4-1-1

K10-4-2

K10-4-3

K10-4-4

K10-4-5

K11

K11-1

K11-1-1

K11-1-2

K11-1-3

K11-1-4

K11-1-5

K11-1-6

K11-2

K11-3

K11-4

SPEAKER

NRP

LCD CABINET CUSHION A

LCD CABINET CUSHION B

LCD ELEPASS

D WASHER

SPRING WASHER

SPEAKER PLATE

PEN FRICTION SHEET

SPEAKER WP SHEET

PEN HOLDER

FRONT CASE TS BLACK

SCREW

MAGNET

MAGNET TAPE

TOUCH SCREEN　PANEL KIT

TS PANEL ASS'Y

PROTECTIVE FILM

TS FPC SPACER

TS SPACER A

NRP

TS SPACER B

LCD SIDE CUSHION B TS

LCD REAR CABINET ASS'Y

REAR CASE ASS'Y

LCD CABINET CUSHION A

LCD CABNET CUSHION B

LCD ELEPASS

D WASHER

SPRING WASHER

REAR CASE

NRP

LCD REAR CUSHION J

LCD REAR CUSHION A

LCD REAR CUSHION G

75 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K11-6

K11-7

K11-8

K11-9

K11-10

K12

K12-1

K12-2

K12-3

K12-4

K12-5

K12-6

K12-7

K12-8

K12-9

K12-10

K12-11

DFHR3563YA

DFHR3564YA

DFHR3565YA

DFGB0165YA-0

DFGB0131YA-0

DFKM9040WA-0

DFHM0320YA

DFHR3434ZA

DFHR3440ZA

DFHR3470YA

DFHR3D86ZA

DFHR3D94YA

DFHR3E15ZA

DFHR3E16ZA

DFHR3F00ZA

DFHR3F01ZA

DFHR6276ZA-0

DFKM0519WA-0

DFKE9089YA-0

DFBH3030ZA

DFHM0315YC

DFHR3466YA

DFHR3509YA

DFKE0889ZA-0

DFKE0891ZA-0

DFUN0068XA

DFUS0323ZA

DRHM0109ZAT

DRQT26+D3KLT

DXQT2+F3FNLT

DFKE9090XA-0

DFBH3030ZA

DFHM0285XC

DFHR3466YA

DFHR3508YA-0

DFKE0889ZA-0

DFKE0890ZA-0

DFUN0068XA

DFUS0323ZA

DRHM0109ZAT

DRQT26+D3KLT

DRHM5025YAT

DFHR6218YA

DFKE9091YA-0

DFBH3030ZA

DFHM0285XC

DFHR3466YA

DFHR3588RA-0

DFKE0889ZA-0

DFKE0890ZA-0

DFUN0068XA

DFUS0323ZA

DRHM0109ZAT

DRHM5025YAT

DRQT26+D3KLT

DFHR6218YA

DRQT26+D3KLT

DXQT3+F4FNLT

DFKE9092YA-0

DFHG1669ZA

DFHM0291ZA

DFHM0294WA

DFHM0295ZA

DFKE0892ZA-0

DFKE0893YA-0

DFNW1604ZA

NRP

LCD REAR CUSHION C

LCD REAR CUSHION D

LCD REAR CUSHION E

TOUGHBOOK BADGE NEW

PANASONIC BADGE

TOP CASE ASS'Y

TOP ELEPASS

AUDIO WATERPROOF SHEET

DSUB WATERPROOF SHEET

PSW WATERPROOF SHEET

FS CASE WP SHEET

GPS HOLE SHEET A

LAN WP SHEET

MODEM WP SHEET

1394 WP SHEET

USB BACK WP SHEET

POWER SW KNOB

TOP CASE

NRP

K12-12

K12-13

BAT LID ASS'Y

LID HINGE

LATCH PLATE BATTERY

LID KNOB SHEET

BAT COVER SHEET

LID KNOB

K12-13-1

K12-13-2

K12-13-3

K12-13-4

K12-13-5

K12-13-6

K12-13-7

K12-13-8

K12-13-9

K12-13-10

K12-13-11

K12-14

K12-14-1

K12-14-2

K12-14-3

K12-14-4

K12-14-5

K12-14-6

K12-14-7

K12-14-8

K12-14-9

K12-14-10

K12-14-11

K12-14-12

K12-15

K12-15-1

K12-15-2

K12-15-3

K12-15-4

K12-15-5

K12-15-6

K12-15-7

K12-15-8

K12-15-9

K12-15-10

K12-15-11

K12-15-12

K12-16

NRP

BAT LID

LID KNOB SPRING

LID KNOB SPRING PLATE

SCREW

HDD LID ASS'Y

LID HINGE

LID LATCH PLATE

LID KNOB SHEET

HDD COVER SHEET

LID KNOB

NRP

HDD LID

LID KNOB SPRING

LID KNOB SPRING PLATE

SCREW

SPACER

PCMCIA LID ASS'Y

LID HINGE

LID LATCH PLATE

LID KNOB SHEET

PCMCIA LID SHEET

LID KNOB

NRP

HDD LID

LID KNOB SPRING

LID KNOB SPRING PLATE

SCREW

SPACER

SCREW

TABLET LATCH ASS'Y

TABLET LATCH SHEET

TABLET LATCH PLATE

TABLET LATCH PIN

TABLET LATCH SHAFT

TABLET LATCH KNOB

TABLET LATCH LEVER

CUT WASHER

K12-17

K13

K13-1

K13-2

K13-3

K13-4

K13-5

K13-6

K13-7

NRP

76 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K13-8

K14

DFUN0069XA

DFKM9041XA-0

DFHM9016ZA-0

DFHM0401ZA-0

DFHR3E14ZA

DFHM0410YA

DFHR3441ZA

DFHR3F64ZA

DFHR6283ZB-0

DFKM0518XA-0

DFUS0316ZA

DRHM5025YAT

DXQT2+D25FNL

DFHE1019YA

DFHG1209ZA

DFHG1996ZA-0

DFHG1638ZB-0

DFHG1998ZA-0

DFHG1997ZA-0

DFHG1660ZB-0

DFHG1790ZA

DFHG1902ZA-0

DFHG1903ZB-0

DFHG1906ZA-0

DFHG1907YB-0

DFHM0286YB

DFHM0288ZB

DFHM0296XA-0

DFHM0302XA-1

DFHM0303XA-0

DFHM0311ZB

DFHM0403XA

DFHM0406ZA

DFHM0407ZA

DFHR3487YA

DFHR3636ZA

DFHR3D91ZA

DFHR3E03ZA

DFHR3E53ZA

DFHR3F62ZA

DFHR3G19ZA

DFHR6246ZA

DFHR6284ZA

DFHR6286ZA-0

DFHR6289YA

DFHR6290ZA-0

DFHR6312ZA

DFHR7946ZA

DFHR9081ZA

DFMC0870YA

DFMX0383TA

DFMY0419ZA

DFHE0915ZA

DFHM0325ZA

DFHR3432ZA

DFHR3573YA

DFHR3574YA

DFHR3638XA

DFHR3G16ZA

DFHR3G42ZA

DFHR6277ZA-0

DFHR6320ZA-0

DFHR6279YA-0

DFHR6298ZA

DFMC0685ZA

DFMC0816ZA

LATCH KNOB SPRING

BOTTOM CASE ASS'Y

DIMM LID ASS'Y

DIMM LID

DIMM LID WP SHEET

DU LID ANGLE

DU LID WATERPROOF SHEET

HDD BOTTOM SHEET

DU LID

K14-1

K14-1-1

K14-1-2

K14-2

K14-3

K14-4

K14-5

K14-6

K14-7

K14-8

K14-9

K15

K16

K17

K18

K19

K20

K21

K22

K23

K24

K25

K26

K27

K28

K29

K30

K31

K32

K33

K34

K35

K37

K38

K39

K40

K41

K42

K43

K45

K46

K47

K48

K49

K50

K51

K52

K53

K54

K55

K57

K58

K59

K61

K62

K63

K65

K66

K67

K68

K69

K70

K71

K72

NRP

BOTTOM CASE

PLATE SPRING GUIDE PIN

SCREW

DU CON SPONGE

RUBBER HOOT

SERIAL LID RUBBER

MODEM LID RUBBER

USB LID RUBBER

RGB LID RUBBER

LAN LID RUBBER

BAT CUSHION

DC-IN LID RUBBER

1394 LID RUBBER

AUDIO LID RUBBER

USB LID RUBBER 2

LID RUBBER PLATE A

LID RUBBER PLATE C

LCD HINGE COVER(SILVER)

KEYBOARD PLATE(L)

KEYBOARD PLATE(R)

LID RUBBER PLATE B

DU CNT ANGLE

KBD CNT LID

BAT CON ANGLE

PORTRE SHEET

CABLE HOLD SHEET

KB CNT LID WP SHEET

SD BLIND SHEET

FS SCREW SHEET

POWER SWITCH CABLE SHEET

INSULATION SHEET

HDD GUIDE

NRP

DIMM HOLDER

RF SW KNOB

BAT CON HOLDER

FS DUMMY CASE

ANT CABLE HOLDER

MP GUIDE SHEET

PEN

NRP

DU SPRING

INSULATION PARTS

DIMM THERMAL RUBBER

EMI SHEET 10X20

CABLE HOLD PLATE

ANT CABLE CUSHION

LCD SIDE CUSHION E

LCD SIDE CUSHION F

DG TAPE

NRP

INSULATION SHEET 30X140

TAPE PEN HOLDER

CABLE HOLDER

ANT COVER

TABLET LATCH COVER

HINGE CABLE HOLDER

LCD CONDUCTIVE TAPE

INV MIL SHEET

77 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K73

K74

K76

K77

K78

K79

K80

K80-1

K80-2

K80-3

K80-4

K80-5

K80-6

K80-7

K80-8

K80-9

K80-10

K80-11

K80-12

K81

K82

K83

K84

K85

K86

K87

K88

K90

K91

K92

K93

K94

K95

K96

K98

K99

K100

K101

K102

K103

K104

K107

K108

K109

K110

K111

K112

K113

K114

K115

K116

K117

K118

K120

K121

K122

K124

K126

K127

K129

K130

K131

K132

K133

K137

K140

DFMC0877YA

DFMC0878ZA

DFMX1267ZA

DFMX1268ZA

DFQT6077YA

DFUQ0100ZA

DFWV99A0124

DFHM0404ZB

DFHM0416YA

DFHR3589ZA

DFHR3H58ZA

DFHR3F54ZA

DFHR6297ZA

DL3UP1564CAA

DFMX0383TA

DFMX1265ZA

DFMY3208ZA

L9DZYY000008

DXQT2+D4FNL

DFQT0045ZA

DFQT9A29ZA

DFQT9981ZA

DFQT0055YA

DFGT1094YA

DFHD04H004YB

DFHR3F85ZA

DFMC0881ZA

DFHM0309YA-1

DFHR3G18ZA

DFHR3G24ZA

DFMY3224ZA

DFHM0412ZA

DFHR3154ZA

DFHR5484ZA

DFHE0326XA

DFHE0811YA

DFHE1031ZA

DFHG1962ZA

DFHP7200ZA

DFHP7256ZB

DFHP7257ZB

DFHR3438ZA

DFHR3483SA

DFHR3J80ZA

DFHR3642YA

DFHR3643ZA

DFHR3655YA

DFHR3D90ZA

DFHR3D93ZB

DFHR3D97ZA

DFHR3E02ZA

DFHR3E19ZA

DFHR3E34ZA

DFHR3F55ZA

DFHR3F65ZA

DFHR3F66ZB

DFHR6044XA

DFMD2182ZA

DFMD3125ZA

DFMY0278YA

DFMY0473ZA

DFMY3208ZA

DFMY5039ZA

DFUQ0111ZA

DFMY3234ZA

DFHR3488ZA

INVERTER CASE

NRP

INVERTER SHIELD SHEET

INVERTER CASE(BASE)

INVERTER CASE(LOWER)

CAUTION LABEL

LOCK SPRING

HDD MOUNTING KIT

HDD CASE UPPER

HDD CASE LOWER

HDD CASE TAB

HDD DAMPER

HDD CON SHEET

HDD CONNECTOR GUARD

HDD FPC UNIT

INSULATION PARTS

INSULATION SHEET(HDD HEATER)

WLAN SHEET

HEATER(HDD)

SCREW

ENERGY STAR LABEL

WINDOWS VISTA

CENTRINO DUO LABEL

COA SERIAL LAMINATE

RATED LABEL

HEXAGON SPACER H=4.2MM

MODEM CABLE SHEET

BUSTERAID MODEM

SIM LOCK PLATE

BIS HEAD SHEET

BIS HEAD SHEET 2

WLAN SHEET

RF-BT PLATE

LCD CABLE TAPE

CLAMP

GASKET-65TSV10-4-15

GASKET-65TSV4-3-50

GASKET-65TSV13-1.5-20

POWER SPRING SHEET

AHDESIVE TAPE

RF LED PWB TAPE

LED PWB TAPE

CLICK BUTTON SHEET

OPERATION SHEET

KB WP SHEET

LCD CUSHION SHEET

TP BOTTOM TAPE

HDD CASE SPACER

KB CNT HOLE CUSHION

TP WP SHEET

NRP

LED PWB TAPE

PALM REST WP SHEET R

LED SYAKOU SHEET

RF SYAKOU SHEET

OPERATION TAPE

PC SHEET

PET SHEET

CLICK BUTTON PLATE

PLATE HEAT PIPE

BACK PLATE KENSINGTON 2

THERMAL SHEET

CPU HEAT PIPU RUBBER

WLAN SHEET

HEAT PIPE UNIT

POWER SW SPRING

THERMAL DIFFUSION SHEET

ANTENNA SHEET

NRP

78 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

K141

K142

K144

K157

K158

K159

K160

K161

K162

K163

K164

K165

K166

K167

K1051

K1603

K1604

K1610

DFHG429YA

IO DC TUBE

DFHR3G38ZA

DFHP7270ZA

DFMX1339ZA

DFHR3J82ZA

DFHR6352ZA

DFHR3F89ZA

DFHR3H64ZA

DFHR6353ZA

DFMC0901ZA

DFMY0472ZA

DFMY0475ZA

DFHR3650ZA

DFHR3H95ZA

DFMY3264YA

DFHR6339ZA-0

DFHR6340ZA-0

DFHR3J11ZA

DFHE5025XA

DFHE5058ZB

DFHE5108ZA

DRHM0112ZA

DRHM0115ZA

DRHM5025YA

DRQT26+E5FKL

DRSB2+10FKL

DRSB2+5FKL

DRHM0061ZA

DRYN3+J6FKL

DRQT3+E4FKL

DXYN2+J6FNL

DXYN3+J10FNL

DXYN3+J8FNL

DXYN4+J8FNL

XSB2+3FNL

DIMM CUSHION

ADHESIVE TAPE

BAT INSULATION SHEET

LCD CABLE PROTECTER

CABLE GUIDE HINGE

MCH SHEET

COIN BAT SHEET

LAN CONN HOLDER

GASKET-65TSV13-1(T9)-1.9

THERMAL RUBBER CPU

ICH RUBBER

WATERPROOF SHEET

LCD TS PWB SHEET

DIMM THERMAL SHEET

DUMMY EXPRESS CARD

DUMMY PC CARD

PCMCIA DUMMY CARD CUSHION

SCREW

NRP

N10

N11

N14

N15

N16

N17

N18

N19

SCREW

79 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacement Parts List

Note: Important Safety Notice

Components identified by

mark have special characteristics important for safety.

When replacing any of these components use only manufacturer's specified parts.

CF-19FHGAXxM

REF. NO and AREA

MAIN PCB

PART NO.

DESCRIPTION

Q'TY

C 1, 135, 136, 137, 197,

198, 268, 279, 281, 328,

376

F1J0J4750019

CAPACITOR, 6.3V, 4.7µF

C 2, 3, 4, 5, 6, 9, 50, 51,

55, 56, 57, 61, 62, 63,

64, 65, 66, 67, 68, 69,

70, 71, 72, 73, 74, 75,

76, 77, 152, 153, 154,

155, 159, 161, 163, 165,

168, 169, 170, 171, 174,

176, 178, 180, 185, 187,

190, 205, 206, 230, 231,

232, 233, 234, 235, 237,

238, 239, 240, 241, 242,

243, 244, 245, 246, 272,

282, 283, 289, 290, 300,

301, 302, 309, 313, 314,

316, 317, 318, 320, 323,

327, 334, 346, 351, 356,

375, 393, 394, 396, 397,

398, 399, 400, 401, 403,

404, 405, 406, 407, 408,

409, 410, 411, 412, 413,

415, 416, 417, 418, 419,

420, 421, 424, 428, 429,

432, 439, 450, 451, 453,

454, 459, 460, 461, 462,

463, 470, 471, 472, 488,

490, 500, 501, 502, 503,

507, 508, 510, 512, 513,

514, 516, 520, 521, 522,

523, 524, 601, 607, 642,

F1G1C104A042

CAPACITOR, 16V, 0.1µF

154

646 656 698

C 10, 11, 12, 13, 14, 15,

F1J0J106A016

CAPACITOR, 6.3V, 10µF

16, 17, 18, 19, 20, 21,

22, 23, 24, 25, 26, 27,

28, 29, 30, 31, 32, 33,

34, 35, 36, 37, 38, 39,

40, 41, 45, 84, 85, 86,

87, 88, 89, 90, 91, 92,

93, 94, 95, 96, 158, 160,

162, 164, 173, 175, 177,

179, 186, 189, 249, 250,

251, 252, 253, 254, 288,

319, 344, 345, 347, 370,

371, 372, 378, 379, 380,

381, 437, 473, 511, 515,

723, 742, 743

C 42, 78, 79, 80, 81, 83,

EEFCX0D221R

F1G1H102A496

CAPACITOR, 2V, 220µF

CAPACITOR, 50V, 1000pF

247, 248

C 46, 306, 307, 325, 422,

431, 433, 489, 491, 492,

616, 628, 631, 635, 653,

655, 657, 669, 686, 688,

693, 706, 713, 754, 755,

756, 757, 758

C 58, 59, 138, 139, 140,

F1H0J1050022

CAPACITOR, 6.3V, 1µF

141, 142, 143, 144, 145,

150, 157, 166, 181, 199,

200, 201, 202, 203, 204,

269, 270, 271, 388, 509

80 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

C 97, 255, 256, 315, 321,

336, 337, 340, 341, 342,

343, 386, 387, 389, 390,

525, 603, 726, 740, 751,

F1H1A1050015

CAPACITOR, 10V, 1µF

768

C 98, 99, 100, 101, 102,

F1G0J474A001

F1J0J226A051

F1G1E103A062

CAPACITOR, 6.3V, 0.47µF

CAPACITOR, 6.3V, 22µF

CAPACITOR, 25V, 0.01µF

103, 104

C 105, 106, 107, 108, 109,

110, 111, 112, 258

C 113, 114, 115, 191, 192,

193, 194, 259, 260, 261,

262, 263, 276, 277, 278,

293, 303, 304, 305, 308,

312, 326, 332, 350, 373,

374, 438, 485, 600, 615,

626 636 640 720

C 116, 117, 118, 119, 120,

F1G0J224A001

CAPACITOR, 6.3V, 0.22µF

121, 122, 123

C 124

F1G1H330A542

F1G0J105A001

CAPACITOR, 50V, 33pF

CAPACITOR, 6.3V, 1µF

C 126, 127, 128, 129, 130,

131, 132, 133, 236, 265,

266, 267

C 195, 196

F1G1H150A542

F1G1A104A014

CAPACITOR, 50V, 15pF

CAPACITOR, 10V, 0.1µF

C 211, 222, 223, 224, 225,

226, 227, 228, 383, 384,

385, 425, 426, 427

C 257, 264

F1G1H3R0A543

EEFCX0J121R

F1G1H120A542

F1J1E334A081

F1G1H271A495

F1G1H221A495

CAPACITOR, 50V, 3pF

CAPACITOR

C 273

C 329, 330

C 331, 671

C 333

CAPACITOR, 50V, 12pF

CAPACITOR, 25V, 0.33µF

CAPACITOR, 50V, 270pF

CAPACITOR, 50V, 220pF

C 348, 349, 630, 651, 684,

695, 703, 709

C 382, 643, 644, 645

F1G1C473A004

F1G1H4R0A543

F1G1E472A062

F1H1H104A748

CAPACITOR, 16V, 0.047µF

CAPACITOR, 50V, 4pF

C 391, 392

C 423

CAPACITOR, 25V, 4700pF

CAPACITOR, 50V, 0.1µF

C 435, 606, 627, 634, 658,

685, 692, 702, 705, 725,

765, 767, 769, 770

C 455, 456, 457, 458, 604

F1J1E105A009

F1G1A683A014

F1G1H1010005

CAPACITOR, 25V, 1µF

CAPACITOR, 10V, 0.068µF

CAPACITOR, 50V, 100pF

C 484, 487

C 506, 624, 650, 687, 715,

749

C 609, 610, 611, 612, 613,

F1H1H103A748

CAPACITOR, 50V, 0.01µF

614

C 620, 621

EEFCX0J101R

F1K1E1060001

CAPACITOR, 6.3V, 100µF

CAPACITOR, 25V, 10µF

C 623, 638, 662, 663, 674,

696, 701, 716, 746, 772,

773, 775, 776, 777, 778,

779, 782, 783, 784, 785

C 625, 682, 712, 759

F1H1C224A074

F1G1H220A542

F1J0J475A009

EEFCX0G151R

EEFCD0J470ER

F1G1H561A496

F1H1H222A748

F1G1H470A542

EEFSX0D471XE

F1G1H151A495

F1G1H331A496

F1H1H1830001

EEFCD0D101ER

F1G1H472A496

F1G1H471A496

F1G1H182A496

F1G1H100A544

EEFSX0D331ER

F1G1H222A496

CAPACITOR, 16V, 0.22µF

CAPACITOR, 50V, 22pF

CAPACITOR, 6.3V, 4.7µF

CAPACITOR, 2V, 150µF

CAPACITOR, 6.3V, 47µF

CAPACITOR, 50V, 560pF

CAPACITOR, 50V, 2200pF

CAPACITOR, 50V, 47pF

SPCAP

C 629, 632, 637, 690, 710

C 633, 654, 660, 691, 711

C 639

C 647

C 652, 760

C 659

C 661, 744

C 664, 665, 672, 747

C 668, 761

CAPACITOR, 50V, 150pF

CAPACITOR, 50V, 330pF

CAPACITOR, 50V, 0.018µF

CAPACITOR, 2V, 100µF

CAPACITOR, 50V, 4700pF

CAPACITOR, 50V, 470pF

CAPACITOR, 50V, 1800pF

CAPACITOR, 50V, 10pF

CAPACITOR, 2V, 330µF

CAPACITOR, 50V, 2200pF

C 670, 745

C 673, 752

C 680, 697, 700, 724

C 683, 714

C 689, 708

C 694, 704

C 707

C 717

C 753

81 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

C 766

CF 1, 2, 3

CN 2

F1G1H152A496

D4CC1103A038

K1MYL0B00003

K1NAF0D00003

K1KY42B00001

K1FY104BA024

K1KA20AA0261

K1MY24BA0310

K1MYL0B00004

K1MY52BA0190

K1KA02B00292

K1MY30AA0158

K1MN50AA0018

K1KA20A00310

K1MN26AA0074

K1MY04AA0041

K2HZ104B0014

K1MY40A00001

K1KY12A00005

K1KYA0A00019

K1MN40B00048

K1KA02BA0014

MA2J72900L

CAPACITOR, 50V, 1500pF

THERMISTOR

CONNECTOR

CONNECTOR, USB

CONNECTOR

FPC CONNECTOR

CONNECTOR

DIODE

CN 4

CN 5

CN 6

CN 8

CN 9, 21, 42

CN 10

CN 11

CN 14

CN 15

CN 16

CN 17

CN 18

CN 20

CN 22

CN 23

CN 24

CN 25

CN 27

CN 33

D 2, 3, 8

D 4

B0JDBE000002

B0JCPD000023

B0KB00000044

MA3J14700L

DIODE

D 5, 600

D 6

DIODE

D 9, 10, 11

D 601, 602, 603

D 604

DIODE

B0ADDH000004

MAZ81200ML

DIODE

D 605

MAZ81800ML

DIODE

D 606, 622

D 608

MA3S132E0L

DIODE

B0JCQD000001

B0JCMD000010

B0JDAE000004

MAZ80510ML

DIODE

D 609, 626, 631

D 610, 627, 630

DIODE

D 612, 613, 614, 615, 617,

DIODE

618, 623

D 616

MAZ80620ML

DIODE

D 619, 621

D 620

D 624

D 632, 635

F 1

MA2S11100L

DIODE

B2ABAM000002

B0JCRC000002

B0JCMD000014

K5H502Z00003

K5H202Z00005

K5H802300002

K5H103300003

C2GBD0000037

C1CB00002802

C0JBBZ000319

C1CB00002741

C1CB00002585

C1CB00002732

C3EBFY000002

C1DB00001159

C0CBCBC00137

C1CB00002540

C0DBZYY00017

C0DBZYY00026

C0DBZYY00265

C3EBDY000005

C0DBZYY00016

C0JBAZ002422

C0ZBZ0000978

C0JBAS000218

DIODE

FUSE, 5A, 32V

FUSE, 2A, 32V

FUSE, 8A, 72V

FUSE, 10A, 72V

CPU

F 2, 3, 4, 5, 8

F 10

F 600

IC 1

IC 2

CHIPSET

IC 3

PLL

IC 4

CHIPSET ICH8M

IC 5

IC 6

LAN CONTROLLER

SERIAL EEPROM

IC, PERIPHERAL LSI

IC, REGULATOR

IC, TEMPERATURE CENSOR IC

IC 7

IC 8

IC 9

IC 10

IC 11

IC 12, 19

IC 14

IC, USB POWER SW

POWER MANAGEMENT SWTICH

IC, EEPROM

IC 15

IC 16

IC 18, 32, 34, 35

IC 20

IC, FET SWITCH

IC 21, 22

IC, LOGIC

82 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

IC 23, 24, 25, 71

IC 26

C0EBE0000460

C0EBH0000457

C2CBJA000003

C3FBLY000048

C1CB00002790

C0JBAA000345

C0JBAA000380

C1CB00002723

C0JBAA000362

C0JBAZ002192

C0JBAC000363

C0JBAC000367

C0JBAE000321

C0DBAYY00282

C0DBGYY00422

C0DBGYY00423

C0JBAR000500

C0DBEFE00003

C0ABZA000047

C0ABBA000093

C0DBAYY00194

C0JBAD000236

C0JBAB000621

C0DBEFH00002

C0EBE0000333

C0DBDJH00009

C0DBALH00003

J0JJC0000021

IC 27

IC, MICON

IC 30

FLASH MEMORY

IC, SECURITY CHIP

IC, LOGIC

IC 31

IC 33, 51, 52

IC 41

IC 42

CARDBUS CONTOLLER

IC, LOGIC

IC 46, 55, 56, 57, 59, 67,

IC 50

IC 53

GATE LOGIC

IC, LOGIC

IC 54

IC 58

IC, LOGIC

IC 60

DC/DC CONTROLLER FOR GMCH

LINEAR REGULATOR

IC, SWITCH

IC 65

IC 66

IC 68

IC 70

IC 600

IC, AMP

IC 601

IC, OP AMP

IC, DC/DC

IC 602

IC 603

IC, LOGIC

IC 604

IC, LOGIC

IC 605

IC, REGULATOR

IC 607

IC 608

IC, LINER

IC 610, 611, 612

L 4, 5, 6, 9, 10, 11, 12, 13,

INDUCTOR

29, 53

L 7, 17, 40, 41, 47, 48, 51,

J0MAB0000200

INDUCTOR

52, 60, 61

L 14

G1C91NM00001

G1C1R0Z00002

J0JDC0000044

G1C100K00011

G1C1R0MA0076

J0JHC0000074

J0JDC0000045

J0JDC0000105

G1C4R7MA0240

G1C100Z00023

G1CR60MA0299

G1C2R7Z00003

G1C4R7Z00013

G1CR82M00006

G1A160HA0032

D4FB1R100015

B1CFGD000023

B1GBCFJN0037

INDUCTOR

CHIP BEADS

INDUCTOR

CHIP BEADS

CHOK COIL

COIL

L 15, 16

L 20, 21, 22, 23, 24, 25

L 28

L 30, 31

L 35, 36, 49

L 42, 43, 44

L 50

L 600

L 601, 604

L 602

COIL

L 603

COIL

L 605, 606

L 609

INDUCTOR

COIL

L 610

COIL

PA 2

PROTECTOR 1.1A

TRANSISTOR

Q 1, 2, 646, 657, 659, 661

Q 3, 6, 13, 20, 29, 40, 608,

619, 641, 643, 649, 655,

656

Q 4, 39, 620

B1GDCFNN0031

B1MBDCA00004

B1DHDC000028

TRANSISTOR

Q 5, 8, 28

Q 9, 10, 11, 21, 26, 31, 33,

630

Q 12, 14, 15, 17, 18, 19

B1MBBCA00003

B1GBCFNN0042

TRANSISTOR

Q 22, 24, 36, 37, 610, 621,

631

Q 25, 32, 623, 624, 625,

626, 628, 629

Q 27

XP0421300L

TRANSISTOR

B1GFCFNN0019

B1CHRD000001

B1CFFB000001

2SB0766ARL

TRANSISTOR

Q 30, 603, 604, 606, 607

Q 34, 35

Q 51

Q 600, 601, 602

XP0421400L

83 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

Q 611, 639, 650

B1CFGD000003

B1CFRD000014

TRANSISTOR

FET

Q 613, 618, 633, 636, 638,

642, 647, 648, 652, 653,

660

Q 614, 640, 645

B1MBEDG00001

B1CHRC000009

B1CFRD000025

B1MBEDA00008

ERJ2GEJ102X

FET

Q 622, 627

Q 634, 635

Q 658

FET

TRANSISTOR

RESISTOR, 1/16W, 1KΩ

R 3, 5, 20, 52, 53, 56, 192,

213, 214, 215, 216, 231,

232, 274, 366, 434, 480,

481

R 7, 21, 22, 32, 41, 158,

ERJ2GE0R00X

RESISTOR, 1/16W, 0Ω

199, 210, 234, 239, 241,

317, 331, 370, 396, 492,

499, 604, 625, 692, 693,

707, 711, 715, 717, 720,

732, 814, 840, 841

R 8, 33, 73, 74, 75, 695,

ERJ2RKF1001X

RESISTOR, 1/16W, 1KΩ

703, 797, 798

R 9, 10, 34, 35

ERJ2RKF54R9X

ERJ2RKF1000X

ERJ2RKF2001X

D1H85104A024

ERJ2RKF27R4X

ERJ2GEJ562X

ERJ2GEJ560X

ERJ2GEJ100X

RESISTOR, 1/16W, 54.9Ω

RESISTOR, 1/16W, 100Ω

RESISTOR, 1/16W, 2KΩ

RESISTOR ARRAY

R 11, 12, 37, 95, 96

R 13, 39

R 14

R 15, 16

RESISTOR, 1/16W, 27.4Ω

RESISTOR, 1/16W, 5.6KΩ

RESISTOR, 1/16W, 56Ω

RESISTOR, 1/16W, 10Ω

R 24, 609, 612, 613, 824

R 25, 26

R 27, 157, 324, 638, 639,

651, 652, 734, 735, 745,

746, 762, 763, 774, 775

R 28

ERJ2RKF56R0X

ERJ2RKF68R0X

ERJ2GEJ240X

ERJ2RKF24R9X

ERJ2RKF2210X

D1H81034A024

RESISTOR, 1/16W, 56Ω

RESISTOR, 1/16W, 68Ω

RESISTOR, 1/16W, 24Ω

RESISTOR, 1/16W, 24.9Ω

RESISTOR, 1/16W, 221Ω

RESISTOR ARRAY

R 29

R 30

R 36, 72, 180, 225

R 38

R 40, 154, 155, 156, 486,

504, 505

R 61, 226

ERJ2GEJ203X

ERJ2GEJ222X

ERJ2GEJ330X

RESISTOR, 1/16W, 20KΩ

RESISTOR, 1/16W, 2.2KΩ

RESISTOR, 1/16W, 33Ω

R 65, 66, 450, 451

R 67, 68, 177, 369, 520,

523, 530

R 69

ERJ2RHD3001X

ERJ2RKF20R0X

ERJ2RKF1002X

ERJ2RKF1301X

ERJ2RKF2371X

ERJ2RKF3920X

ERJ2GEJ103X

RESISTOR, 1/16W, 3KΩ

RESISTOR, 1/16W, 20Ω

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 1.3KΩ

RESISTOR, 1/16W, 2370Ω

RESISTOR, 1/16W, 392Ω

RESISTOR, 1/16W, 10KΩ

R 70, 71

R 76, 77, 325, 497

R 78

R 82

R 83

R 90, 91, 150, 153, 174,

175, 204, 220, 261, 280,

289, 290, 291, 297, 298,

302, 316, 319, 322, 323,

335, 336, 365, 367, 388,

389, 452, 453, 454, 473,

474, 489, 498, 507, 521,

525, 527, 529, 531, 533,

615, 641, 646, 713, 733,

737, 741, 765, 771, 805,

820

R 92, 93, 94, 337, 721,

722, 789, 791

ERJ3GEY0R00V

RESISTOR, 1/16W, 0Ω

R 97, 98, 99, 247, 248, 249

ERJ2GEJ1R0X

D1HA56080001

RESISTOR, 1/16W, 1Ω

R 100, 101, 103, 130, 131,

133

RESISTOR ARRAY

R 102, 132, 333

D1H85604A024

ERJ6GEYJ101V

D1H83304A024

ERJ2RKF22R6X

ERJ2RKF3241X

RESISTOR ARRAY

R 135

RESISTOR, 1/10W, 100Ω

RESISTOR ARRAY

R 159, 160, 242, 243

R 171

RESISTOR, 1/16W, 22.6Ω

RESISTOR, 1/16W, 3240Ω

R 172, 173

84 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

R 178, 286, 704

R 181

ERJ2GEJ471X

D1HA1048A001

D1H81504A024

D1H84724A024

D1H81044A024

ERJ2RKF4530X

ERJ2GEJ334X

ERJ2GEJ101X

RESISTOR, 1/16W, 470Ω

RESISTOR ARRAY

R 182

RESISTOR ARRAY

R 205, 206, 211

R 207

RESISTOR ARRAY

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 453Ω

RESISTOR, 1/16W, 330KΩ

RESISTOR, 1/16W, 100Ω

R 208, 209

R 221, 364

R 227, 311, 391, 392, 423,

470, 472, 493, 494, 495,

602, 603, 668, 669, 670,

673, 674, 675, 676, 683,

694, 802, 803

R 228, 229

ERJ2RKF3323X

ERJ2GEJ106X

D1HA1038A001

RESISTOR, 1/16W, 332KΩ

RESISTOR, 1/16W, 10MΩ

RESISTOR ARRAY

R 230

R 244, 245, 246, 253, 293,

475, 476, 477, 478, 479,

482, 483, 500, 501, 502,

503

R 250, 395, 618, 662, 671

ERJ2GEJ105X

ERJ2GEJ121X

ERJ2GEJ472X

ERJ2GEJ104X

RESISTOR, 1/16W, 1MΩ

RESISTOR, 1/16W, 120Ω

RESISTOR, 1/16W, 4.7KΩ

RESISTOR, 1/16W, 100KΩ

R 251

R 252, 401, 402, 403, 832

R 263, 265, 266, 267, 268,

269, 272, 273, 300, 301,

304, 305, 314, 320, 329,

363, 393, 394, 430, 431,

432, 433, 617, 619, 620,

621, 661, 665, 667, 672

R 279, 292

D1H81024A024

ERJ2GEJ221X

RESISTOR ARRAY

R 281, 282, 283, 284, 285,

RESISTOR, 1/16W, 220Ω

287, 288, 294, 295, 296,

780

R 332

ERJ2GEJ331X

ERJ2GEJ512X

ERJ2RKF49R9X

RESISTOR, 1/16W, 330Ω

RESISTOR, 1/16W, 5.1KΩ

RESISTOR, 1/16W, 49.9Ω

R 334

R 380, 381, 382, 383, 384,

385, 386, 387

R 400

ERJ2RHD303X

ERJ2RKF4871X

ERJ2RHD103X

ERJ2GEJ223X

RESISTOR, 1/16W, 30KΩ

RESISTOR, 1/16W, 4.87KΩ

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 22KΩ

R 404

R 405, 406, 605, 608

R 420, 421, 422, 677, 742,

770, 793, 794, 795, 796

R 490, 496, 506

ERJ2RKF3901X

ERJ2RKF5602X

D1ZZ00000046

ERJ2RKF1003X

ERJ2RKF1503X

ERJ3GEYJ3R3V

ERJ2GEJ473X

D1BDR1000002

D1BDR068A100

ERJ3GEYJ562V

ERJ2RKF1102X

ERJ2RKF1302X

D1BDR022A099

D1BDR018A099

ERJ2GEJ474X

RESISTOR, 1/16W, 3.9KΩ

RESISTOR, 1/16W, 56KΩ

RESISTOR, 1W, 5mΩ

R 491

R 601

R 606, 611, 706

R 607, 610, 809

R 614

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 150KΩ

RESISTOR, 1/16W, 3.3Ω

RESISTOR, 1/16W, 47KΩ

RESISTOR, 1/8W, 0.1Ω

RESISTOR, 0.068Ω

R 616, 636, 681

R 622, 623

R 624

R 626

RESISTOR, 1/16W, 5.6KΩ

RESISTOR, 1/16W, 11KΩ

RESISTOR, 1/16W, 13KΩ

RESISTOR, 1/3W, 0.022Ω

RESISTOR, 1/3W, 0.018Ω

RESISTOR, 1/16W, 470KΩ

R 630

R 631

R 634, 654, 761, 778

R 635, 731, 839

R 637, 663, 747, 752, 776,

822

R 640, 736, 764

ERJ2GEJ153X

ERJ3GEYJ100V

ERA3YEB622V

ERA3YKB104V

ERA3YEB203V

ERJ2GEJ333X

ERJ3RBD303V

ERJ3RBD103V

ERJ3RBD132V

RESISTOR, 1/16W, 15KΩ

RESISTOR, 1/16W, 10Ω

RESISTOR, 1/16W, 6.2KΩ

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 20KΩ

RESISTOR, 1/16W, 33KΩ

RESISTOR, 1/16W, 30KΩ

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 1.3KΩ

R 642, 738, 766, 799, 800

R 643

R 644, 829, 830

R 645, 768, 842

R 647

R 648

R 649

R 650

85 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

R 653, 749, 760, 777, 779,

D1BDR033A099

RESISTOR, 1/3W, 0.033Ω

833

R 664

ERJ2GEJ684X

ERJ2GEJ225X

ERJ6GEYJ122V

ERJ6GEYJ222V

ERJ2GEJ393X

ERJ2RKF1800X

ERJ2RKF4702X

ERJ2RKF6801X

ERJ2RKF5103X

ERJ3GEYJ1R0V

ERJ2RHD222X

ERJ2RKF5101X

ERJ2RKF3601X

ERJ3GEYJ101V

ERJ3GEYJ2R2V

D1ZZ00000093

ERJ2RKF4701X

ERJ2RKF1502X

ERJ2RKF7501X

ERJ2RKF1101X

D1BDR016A099

ERA3YEB621V

ERA3YEB243V

ERJ2RKF1202X

ERJ2RKF6981X

ERJ2RKF4022X

D1H8R0040009

ERJ2RKF1691X

ERJ2GEJ303X

ERJ3GEYJ104V

ERJ2RKF1433X

ERJ2RKD114X

ERJ2RHD3652X

ERJ2GEJ154X

ERJ2RHD302X

ERA3YEB333V

K0D112B00071

H0J143500058

H0J327200115

H0J245500083

H0J250500076

H2D800400015

K1YGZZ000060

RESISTOR, 1/16W, 680KΩ

RESISTOR, 1/16W, 2.2MΩ

RESISTOR, 1/10W, 1.2KΩ

RESISTOR, 1/10W, 2.2KΩ

RESISTOR, 1/16W, 39KΩ

RESISTOR, 1/16W, 180Ω

RESISTOR, 1/16W, 47KΩ

RESISTOR, 1/16W, 6.80KΩ

RESISTOR, 1/16W, 510KΩ

RESISTOR, 1/16W, 1Ω

RESISTOR, 1/16W, 2.2KΩ

RESISTOR, 1/16W, 5.1KΩ

RESISTOR, 1/16W, 3.6KΩ

RESISTOR, 1/16W, 100Ω

RESISTOR, 1/16W, 2.2Ω

RESISTOR, 1W, 1mΩ

RESISTOR, 1/16W, 4.7KΩ

RESISTOR, 1/16W, 15KΩ

RESISTOR, 1/16W, 7.5KΩ

RESISOTR, 1/16W, 1.1KΩ

RESISTOR, 1/3W, 0.016Ω

RESISTOR, 1/16W, 620Ω

RESISTOR, 1/16W, 24KΩ

RESISTOR, 1/16W, 12KΩ

RESISTOR, 1/16W, 6.98KΩ

RESISTOR, 1/16W, 40.2KΩ

JUMPER

R 666

R 678, 682

R 679, 680

R 690

R 696

R 699

R 700, 801

R 701

R 702, 708, 714

R 709

R 710

R 712

R 716, 810

R 718, 790

R 719, 808

R 739

R 740, 744, 772

R 743

R 748

R 751

R 767

R 769, 835

R 773

R 792, 813

R 806

R 807

R 811

RESISTOR, 1/16W, 1.69KΩ

RESISTOR, 1/16W, 30KΩ

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 143KΩ

RESISTOR, 1/16W, 110KΩ

RESISTOR, 1/16W, 36.5KΩ

RESISTOR, 1/16W, 150KΩ

RESISTOR, 1/16W, 3KΩ

RESISTOR, 1/16W, 33KΩ

R 812

R 815

R 817

R 821

R 823

R 825

R 826, 827

R 831, 836, 843

SW 2

X 1

OSCILLATOR, 14.318MHz

OSCILLATOR, 32.768KHz

XTAL

X 2

X 3

X 4

XTAL

X 5

OSCILLATOR, 8MHz

ZA 1, 2, 5, 6, 7, 10, 11

SPACER

AUDIO PCB

C 900, 906, 916, 917, 934,

935

F1G1A104A014

CAPACITOR, 10V, 0.1µF

C 901, 903, 943, 948

F1H1A225A039

F1G0J224A001

CAPACITOR, 10V, 2.2µF

CAPACITOR, 6.3V, 0.22µF

C 902, 907, 908, 912, 915,

918, 919, 932, 944

C 909

F1G1E103A062

F1H1A1050015

F1J0J106A016

F1G1H221A495

F1G1C104A042

F1H0J1050022

F1G1H102A496

F1H1A474A028

F1G1H1010005

F1G0J105A001

F1G1H471A496

F1L0J107A016

K1MN40B00048

CAPACITOR, 25V, 0.01µF

CAPACITOR, 10V, 1µF

CAPACITOR, 6.3V, 10µF

CAPACITOR, 50V, 220pF

CAPACITOR, 16V, 0.1µF

CAPACITOR, 6.3V, 1µF

CAPACITOR, 50V, 1000pF

CAPACITOR, 10V, 0.47µF

CAPACITOR, 50V, 100pF

CAPACITOR, 6.3V, 1µF

CAPACITOR, 50V, 470pF

CAPACITOR, 6.3V, 100µF

CONNECTOR

C 910, 928, 929, 930, 931

C 911, 922, 937, 938, 951

C 913

C 914, 920, 921, 952

C 923, 924

C 925, 939, 940

C 926, 927

C 933, 941, 946

C 936

C 942, 945

C 949, 950, 953, 954

CN 901

86 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

CN 902

K1MY12BA0309

K1KA02BA0014

B0JDBE000002

K5H202Z00005

C1CB00002733

C0CBCBC00130

C0JBAE000306

C0JBAS000251

C0ABBA000093

AN12945A-VB

K2HC103B0197

K1QZA1AE0001

J0JCC0000286

J0MAB0000174

J0JJC0000015

B1GBCFNN0042

XP0421300L

CONNECTOR

DIODE

CN 904

D 902

F 902

FUSE, 2A, 32V

AUDIO CODEC

IC, REGURATOR

IC,

IC 900

IC 901

IC 902

IC 903

IC 904

IC, OP AMP

IC, AUDIO AMP

JACK

IC 905

JK 901, 902

JK 903

CONNECTOR

INDUCTOR

TRANSISTOR

RESISTOR, 1/16W, 10KΩ

L 900, 901, 904, 905, 907

L 902, 903

L 906

Q 900, 905, 908

Q 902

Q 903, 904

Q 907

B1CFGD000023

B1GDCFNN0031

ERJ2GEJ103X

R 900, 904, 907, 909, 913,

920, 921, 928, 932, 940,

942, 947, 951

R 901, 922

ERJ2RKF2671X

ERJ2GEJ330X

ERJ2GEJ472X

ERJ2GEJ390X

ERJ2GEJ473X

ERJ2RKF1003X

ERJ2GE0R00X

ERJ2GEJ104X

RESISTOR, 1/16W, 2.67KΩ

RESISTOR, 1/16W, 33Ω

RESISTOR, 1/16W, 4.7KΩ

RESISTOR, 1/16W, 39Ω

RESISTOR, 1/16W, 47KΩ

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 0Ω

R 902

R 905, 910, 936

R 906, 911

R 912

R 915, 916

R 917

R 918, 919, 930, 937, 939,

RESISTOR, 1/16W, 100KΩ

943, 944

R 923

ERJ2GEJ100X

ERJ2RHD3922X

ERJ2RHD203X

ERJ2RKF1602X

ERJ2RKF1002X

ERJ2GEJ102X

ERJ2GEJ471X

ERJ2GEJ222X

ERJ3GEY0R00V

RESISTOR, 1/16W, 10Ω

RESISTOR, 1/16W, 39.2KΩ

RESISTOR, 1/16W, 20KΩ

RESISTOR, 1/16W, 16KΩ

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 1KΩ

RESISTOR, 1/16W, 470Ω

RESISTOR, 1/16W, 2.2KΩ

RESISTOR, 1/16W, 0Ω

R 926

R 927

R 929

R 931, 933

R 934, 938, 946, 948

R 935

R 941, 945

R 950

IO PCB

C 880

F1H1H104A748

F1L1E106A017

F1G1H330A542

CAPACITOR, 50V, 0.1µF

CAPACITOR, 25V, 10µF

CAPACITOR, 50V, 33pF

C 883

C 884, 885, 886, 887, 888,

889, 890

C 891

F1G1C104A042

EZASCE101M

K1MY24AA0158

K1FA209BA004

K1FB115BA014

DFJS1063ZA

CAPACITOR, 16V, 0.1µF

CAPACITOR ARRAY

CONNECTOR

I/O DC CABLE

DIODE

C 892, 893

CN 880

CN 881

CN 882

CN 883

D 880

B0JCPD000023

MA2J72900L

D 881

DIODE

F 800

K5H802300002

K2EEYB000001

J0JKC0000007

J0JDC0000038

FUSE, 8A, 72V

JACK

JK 880

L 880

INDUCTOR

L 881, 882, 883, 884, 885,

886, 887

CHIP BEADS

PA 880

D4FB1R100015

D1BDR4700001

ERJ2RKF75R0X

ERJ2GEJ222X

PROTECTOR 1.1A

R 881

RESISTOR, 1/8W, 0.47Ω

RESISTOR, 1/16W, 75Ω

RESISTOR, 1/16W, 2.2KΩ

R 882, 883, 884

R 885, 886

PAD PCB

C 800, 801

F1G1H681A496

CAPACITOR, 50V, 680pF

87 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

C 802

C 803, 804, 806

C 805

F1G1E103A062

F1G1C104A042

F1J0J106A016

K1MY04BA0104

K1MY06BA0309

K1MY40A00001

K1MY08AA0158

K1KA02BA0014

K1MY10AA0158

K1MY10BA0309

K5H202Z00005

C0EBE0000460

C1DB00001417

B1GKCFJN0004

ERJ2GEJ273X

ERJ2GEJ822X

ERJ2GEJ105X

ERJ2GEJ222X

D1H81034A024

K0ZZ00000618

EVQPLDA15

CAPACITOR, 25V, 0.01µF

CAPACITOR, 16V, 0.1µF

CAPACITOR, 6.3V, 10µF

CONNECTOR

CN 800

CN 801

CONNECTOR

CN 802

CONNECTOR

CN 803

CONNECTOR

CN 804, 807

CN 805

CONNECTOR

CN 806

CONNECTOR

F 800

FUSE, 2A, 32V

IC 800

IC 801

IC, FLAT PAD CONTROLLER

TRANSISTOR

Q 800, 801

R 800

RESISTOR, 1/16W, 27KΩ

RESISTOR, 1/16W, 8.2KΩ

RESISTOR, 1/16W, 1MΩ

RESISTOR, 1/16W, 2.2KΩ

RESISTOR ARRAY

R 801, 802

R 803

R 804, 805

RA 800

SW 800, 801

SW 802, 803

X 800

SWITCH

H2D400400012

OSCILLATOR, 4MHz

SW PCB

CN 950

LD 951

K1MY10AA0158

B3ABB0000210

EVQPLDA15

CONNECTOR

DIODE

SW 950, 951, 952, 953, 954,

SWITCH

955

LED-LEFT PCB

CN 841

K1MY10AA0158

B3ABB0000210

CONNECTOR

DIODE

LD 841, 842, 843, 844, 845,

846

PR PCB

C 851, 852, 854

F1J1A1050021

J0MAB0000146

J0HABC000004

CAPACITOR, 10V, 1µF

INDUCTOR

C 855, 856, 857

CA 851, 852, 854, 857, 858,

CAPACITOR ARRAY

859

CN 850

K1KYA0A00018

K1KAA0AA0244

J0MAB0000200

J0JJC0000015

CONNECTOR

INDUCTOR

CN 851

L 850

L 852, 853

INDUCTOR

LED-RIGHT PCB

LD 781

B3AGB0000040

B3ADB0000065

B3ABB0000210

K1MY06AA0158

DIODE

LD 782

DIODE

LD 783

DIODE

CN 780

CONNECTOR

SD PCB

LD 880

C 880

B3ACB0000020

F1G1H330A542

F1G1C104A042

DIODE

CAPACITOR, 50V, 33pF

CAPACITOR, 16V, 0.1µF

C 881, 882, 884, 885, 886,

887

C 889, 890, 891, 892

F1H2A103A020

F1L3D102A003

K1MY24BA0310

K1NA09E00076

K1KA08BA0014

D1H87504A024

ERJ2GEJ103X

G5BYC0000015

CAPACITOR, 100V, 0.01µF

CAPACITOR, 2000V, 1000pF

CONNECTOR

C 893

CN 880

CN 881

CN 882

R 880

CONNECTOR

RESISTOR ARRAY

RESISTOR, 1/16W, 10KΩ

TRANCE

R 882

T 880, 881

HSDPA PCB

C 600, 603

F1G1H1010005

F1J0J106A016

EEFUD0J151ER

F1G1C104A042

CAPACITOR, 50V, 100pF

CAPACITOR, 6.3V, 10µF

CAPACITOR, 6.3V, 150µF

CAPACITOR, 16V, 0.1µF

C 601, 602, 604, 608

C 609, 610

C 613, 614, 615, 616

C 611, 612, 617, 620

88 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

C 619

C 622

EEFCX0J121R

F1G1H221A495

K1MN50BA0153

K1MY52BA0190

K1NA08E00013

K1MY10BA0309

B0KB00000044

B0JCRC000002

C0JBAZ002422

C0JBAC000382

C0DBAYY00204

C0DBZGD00016

C0DBZYY00026

C0EBE0000460

K1QZA1AE0001

J0JJC0000015

J0MAB0000200

G1C2R7MA0273

B1DHFD000015

B1GBCFNN0042

B1CFGD000023

D1BDR0330001

D1BDR0470002

ERJ2GEJ103X

ERJ2GE0R00X

ERJ2GEJ101X

ERJ2RKF1001X

ERJ6GEY0R00V

ERJ2RKF1002X

ERA3YEB303V

ERJ2GEJ104X

K0D444A00041

K1YGZZ000060

K1FY104BA024

CAPACITOR

CAPACITOR, 50V, 220pF

CONNECTOR

CN 600

CN 601

CN 602

CN 604

D 600

CONNECTOR

SIM CONNECTOR

CONNECTOR

DIODE

D 603

DIODE

IC 600

IC, FET SWITCH

IC, LOGIC

IC 601

IC 602

IC, DC/DC CONVERTER

IC 603

IC 604

IC, USB POWER SW

IC 605

JK 600, 601

L 600

CONNECTOR

INDUCTOR

L 601

INDUCTOR

L 602

INDUCTOR

L 603

INDUCTOR, COIL

TRANSISTOR

Q 600

Q 602, 604

Q 603

TRANSISTOR

R 600

RESISTOR, 1/8W, 0.033Ω

RESISTOR, 1/8W, 0.047Ω

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 0Ω

RESISTOR, 1/16W, 100Ω

RESISTOR, 1/16W, 1KΩ

RESISTOR, 1/10W, 0Ω

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 30KΩ

RESISTOR, 1/16W, 100KΩ

SWTICH

R 601

R 602, 606, 609, 615, 616

R 603, 613

R 604, 611, 612, 619

R 608

R 610

R 617

R 618

R 621, 622

SW 600

ZA 600, 601

CN 603

SPACER

CONNECTOR, USB

PPOWER SWPCB

CN 980

K1KA02AA0262

K0D112A00096

CONNECTOR

SW 980

BT PCB

C 1

F1J0J106A016

F1G1C104A042

F1G1H102A496

F1G1E103A062

F1G1H270A542

F1G1HR50A543

K1MY10BA0309

C0JBAZ002422

N5HZZ0000056

C0EBE0000460

C0JBAC000382

K1QZA1AE0001

J0JJC0000015

G1C5N6ZA0029

J0MAB0000200

B1GBCFNN0042

B1DHDC000028

ERJ2GEJ103X

CAPACITOR, 6.3V, 10µF

CAPACITOR, 16V, 0.1µF

CAPACITOR, 50V, 1000pF

CAPACITOR, 25V, 0.01µF

CAPACITOR, 50V, 27pF

CAPACITOR, 50V, 0.5pF

CONNECTOR

C 2, 4, 7, 11

C 3, 5

C 6, 9

C 8

C 10

CN 2

IC 1

IC, FET SWITCH

BLUETOOTH MODULE

IC 2

IC 3

IC 5

IC, LOGIC

JK 1

CONNECTOR

L 1, 2

L 4

INDUCTOR

INCUCTOR

L 5

INDUCTOR

Q 1

TRANSISTOR

Q 2

TRANSISTOR

R 1, 2, 3

RESISTOR, 1/16W, 10KΩ

TS PCB

C 900, 901, 902, 903

C 904, 905, 906, 907

C 908, 911, 912

C 909

F1G1E472A062

F1G1H681A496

F1G1C104A042

F1G1E223A062

F1G1H102A496

CAPACITOR, 25V, 4700pF

CAPACITOR, 50V, 680pF

CAPACITOR, 16V, 0.1µF

CAPACITOR, 25V, 0.022µF

CAPACITOR, 50V, 1000pF

C 910

89 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

C 913, 916

C 914

F1J0J106A016

F1G0J224A001

K1MN04B00073

K1KA06BA0014

C0EBE0000460

C1CB00002515

XP0431400L

CAPACITOR, 6.3V, 10µF

CAPACITOR, 6.3V, 0.22µF

CONNECTOR

CN 900

CN 901

IC 900

CONNECTOR

IC 902

IC, TOUCHPANEL CONTROLLER

TRANSISTOR

Q 900, 901

Q 902

B1GDCFNN0031

ERJ2GEJ102X

TRANSISTOR

R 900, 903, 905, 909, 911,

912, 917, 918, 922, 923

R 906, 930

RESISTOR, 1/16W, 1KΩ

ERJ2GEJ473X

ERJ2GEJ273X

ERJ2GEJ822X

ERJ2GE0R00X

D1HA47380002

ERJ2GEJ270X

ERJ2GEJ152X

H2D600400005

RESISTOR, 1/16W, 47KΩ

RESISTOR, 1/16W, 27KΩ

RESISTOR, 1/16W, 8.2KΩ

RESISTOR, 1/16W, 0Ω

RESISTOR ARRAY

R 908

R 913, 914, 915, 916

R 919, 925

R 926

R 927, 928

R 929

RESISTOR, 1/16W, 27Ω

RESISTOR, 1/16W, 1.5KΩ

OSCILLATOR, 6MHz

X 900

90 / 90

Download from Www.Somanuals.com. All Manuals Search And Download.

La Crosse Technology Clock Radio WT 2160 User Manual
Lenoxx Electronics Heat Pump Elite 13 User Manual
Lux Products Water Heater TX1500 User Manual
Mackie Video Game Controller MCU Pro User Manual
Marshall electronic Computer Monitor V RD151 4 User Manual
Maytag Oven AOCS3040 User Manual
Mazda Automobile 2007 3 4 DOOR User Manual
Meade Telescope 80EQ AR User Manual
Mellerware Hair Dryer 2 0 1 0 0 User Manual
Metra Electronics Automobile Accessories 99 3042 User Manual