Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
SDI: 525i/60hz 4x3
Email: [email protected]
OSD
Use SELECT to enable the On Screen Display
for input and function status
V-R82DP-HD Users Guide
Blue Only
SELECT to adjust SMPTE or split field color bars.
1. Allow monitor to warm up for 5-10 minutes minimum.
2. Display SMPTE color bars on monitor. Turn on off Color with control.
3. Find the PLUGE (superblack, black, and gray bars) at the lower right
of the pattern.
Adjust BRIGHTNESS until there is no difference visible between the super-
black and black bars, but is still visible.
4. Adjust CONTRAST control to achieve a balanced gray scale across
top bars.
5. Turn up CHROMA (color level) control until the two outermost bars
(white and blue appear to match in brightness.
6. NTSC Only -Adjust COLOR PHASE (tint or hue) control until the third
bar from the left (cyan) and the third bar from the right (magenta) appear to
match in brightness.
Product Overview
Features
1
2
3
10
Warranty
Marshall Electronics warranties to the first consumer, that this V-R82DP-HD Dual 8.4-inch LCD rack mounted monitor set will, under
normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the
purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof
of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore,
labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifica-
tions in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any war-
ranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time
period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of
the display active viewing area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to
effective use of the monitor by our technicians.
Video - Screen Formats and Frame Rates
Electrical Specifications
Mechanical Specifications
Operational Setup
4
5
6
Connectors
7
8
9
Switch Settings, Adjustments and Indicators
Menu Functions
Due to constant effort to improve products and product features, specifications may change without notice.
Warranty
10
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 1 Computer Signals Displayed via DVI connector
DVI-D
VGA
16x9
Input Signal Type
and aspect
4x3
16x9
4x3
640 x 480 60Hz
640 x 480 75Hz
640 x 480 85Hz
800 x 600 60Hz
800 x 600 75Hz
800 x 600 85Hz
1024 x 768 60Hz
1024 x 768 75Hz
1024 x 768 85Hz
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Table 3 Computer Signals Displayed via SDI/HDSDI
SDI
Input Signal Type and aspect
4:3
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
x
16:9
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
x
NTSC (720x486i 60Hz)
PAL (720 x 576i 50Hz)
1280x720p 60Hz
1280x720p 59.94Hz
1280x720p 50Hz
1280x720p 30Hz
Table 2 Video Signals Displayed via DVI and YPrPb connections
(x=not available) (HDMI requires adapter to DVI)
1280x720p 29.97Hz
1280x720p 25Hz
1920x1080p 30Hz
1920x1080p 29.97Hz
1920x1080p 25Hz
1920x1080p 24Hz
1920x1080p 23.98Hz
1920x1080sf 24Hz
1920x1080sf 23.98Hz
1920x1080i 60Hz
Y Pr Pb
DVI
Input Signal Type
and aspect
4x3
16x9
4x3
16x9
720 x 486 60i
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
x
x
x
x
x
x
720 x 576 50i
1280 x 720 60P
1280 x 720 50P
1280 x 720 30P
1280 x720 29.97P
1280 x720 25P
1280 x 720 24P
1280 x 720 23.98P
1920 x 1080 60i
1920x1080 59.94i
1920 x 1080 50i
1920 x 1080 30P
1920x1080 29.97P
1920 x 1080 25P
1920 x 1080 24P
1920 x 1080 24Psf
Y
Y
x
Y
Y
x
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
x
x
x
x
1920x1080i 59.94Hz
1920x1080i 50Hz
x
x
x
x
1920x1035i 60Hz
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1920x1035i 59.94Hz
Marshall Electronics
V-R82DP-HD Users Guide
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
9
1
Menu Functions
Product Overview
The V-R82DP-HD features our Completely Digital TFT-Megapixel™ high definition TFT/LCD system with 1.44 million pixels. Analog
signals are digitized using an advanced 10 bit process with 4x over sampling and adaptive 5 line comb filter plus exacting color space
conversion. Video is scaled to fit on screen in the highest resolution using a state of the art LSI that incorporates 6x6 pixel adaptive
motion interpolation with precision Gamma correction. Additional features include Pixel-to-Pixel™ native resolution scaling, setup
memory, Underscan, H/V Delay, adjustable color temperature, and Blue Gun.
1. Power On/Off Button
Illuminates Red when system power is present. Illuminates Green when monitor is ON.
2. Source Selection Buttons
Video - Composite NTSC or PAL. Composite video must comply to SMPTE-RS170M.
Images without color burst (Subcarrier) component may not display.
S-Video - Y/C (Luminance + Chrominance) NTSC or PAL.
YPrPb - Analog Component color difference signals for Standard Definition (YCrCb) or High Definition (YPrPb).
VGA - Analog PC.
DVI - Digital Computer or Video Signals. Includes HDCP for use with HDMI originated signals.
HDSDI - Digital Input for Standard Definition (SDI-270Mbs) or High Definition (HDSDI - 1.485Gb/s).
2
Features
• TFT-MegaPixel™ totally digital end to end signal processing
• Multiple format acceptance for virtually any analog or digital video signal
• Display PC Signals to XGA 1024x768
• ColorMatch Conversion™ with SMPTE/EBU color space emulation of CRT
• Color temperature preset for D65
• HyperProcess™ motion interpolation of interlace images
• On screen display of input status, formats, and menu functions
• Pixel to Pixel™ native resolution display
• Ready to mount – all brackets are factory installed
• Lightweight – 75% lighter than CRT models
• Settings memory restores active state with power off/on cycle
• Underscan plus H & V delay
• Blue only (Blue Gun) for adjustment to SMPTE color bars
• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)
• Three LEDs (Red, Green, Amber) produce 7 different tally indications on each screen
• Dry erase label for each screen
3. Pixel to Pixel Function
As the native LCD displays of the V-R82DP-HD are 800 pixels wide by 600 dots (RGB pixels) high, it is necessary to change the size of
the image to fill the whole screen. Pixel to Pixel mode bypasses the enlargement/shrink of this scaling function and displays the native
incoming format.
For 525-NTSC/480P based images, pixel to pixel will appear as a 480x640 (4:3 aspect) or 480x720 (16:9 aspect).
For 625-PAL/576P based images, pixel to pixel will appear as a 576x640(4:3 aspect) or 576x720 (16:9 aspect).
For 1080 line HD based images, pixel to pixel will appear as cropped 800x600 (4:3 aspect) starting from the center of the
image. 240 lines top, 240 lines bottom, 560 pixels left and 560 pixels right will be cropped.
For 720 line HD based images, pixel to pixel will appear as cropped 800x600 (4:3 aspect) with 60 lines from the top and 60 lines from
the bottom cropped. Horizontally, 240 pixels will be cropped from each edge.
3. Menu Enable and navigation
All signal types and frame rates are automatically detected
3
Video - Screen Formats and Frame Rates
Access menu functions by selecting the MENU button. Use UP / DOWN to navigate and
SELECT to enable or disable the function
Note: Source selection is disabled when in menu mode.
Color Temperature
D-65 (6500K) - Standard setting recommended by SMPTE and EBU.
Simulates normal daylight conditions.
USER - When activated manual adjustment is performed by selecting
Adj. Color Gain or Adj. Color Bias
• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)
• 480P (Progressive)
• 576P (Progressive)
• 720P-50P, 59.94P, 60P, 25P, 29.97P, 30P, 50P, 59.94P, 60P (Progressive)
• 1035i - 59.94i, 60i (Interlaced)
• 1080i x 1920 – 50i, 59.94i, 60i, 23.973P, 24P, 25P, 29.97P, 30P, 24psf, 23.97psf
4
Electrical Specifications
Screen Aspect
Display (Viewing Area)
Viewing Angles
Resolution (RGB Dots)
Color Depth
4:3/16:9 switchable
8.4 Inch diagonal (170.4mm w x 127.8mm h)
130° H x 120° V
800H×RGBx600V (1.44 million pixels)
262,000 Colors (6-Bit)
.213mm square pixel
When in adjust mode use UP/DOWN to change values. Use SELECT to cycle RED, GREEN,
and BLUE mode. Exit to the main menu by pressing MENU.
Dot Pitch
Contrast Ratio
Pixel Response
Brightness (in cd/m²)
Backlight
LCD Screen Treatments
Estimated MTBF
System
350:1
10ms rise/25ms fall
500 cd/m²
Field Replaceable CCFL (50,000 hour half life)
Anti Reflection, Anti Glare, Hardcoat
5 years of 24/7/365 operation
NTSC/PAL with auto recognition
HDSDI/SDI (SMPTE259M, 292M) (ITR-U601) per screen (BNC)
YPrPb Component (3 BNC)
Left Line= Increase of Gain
Center Line = D65 (Default)
Right Line = Decrease of Gain
Right Line= Increase of Bias
Center Line = D65 (Default)
Left Line = Decrease of Bias
Inputs
Level Set-up
Composite Video PAL/NTSC auto detect (BNC)
S-Video (Y/C) (4 Pin Mini Din female)
XGA 15Pin HD-15 Female
SELECT between 7.5 IRE for NTSC signals and 0 IRE for NTSC Japan and PAL signals.
7.5 mode will enable a digital black offset of the onscreen images for improved Blacks.
DVI 27 (Pin DVI-I Female)
Tally (HD-15 Female)
Color Bar
Use to SELECT internal test signal of full field color bars that is available for confirmation
of LCD operation. This function will disable input selection until cycled off.
Active Outputs
HDSDI/SDI (SMPTE259M, 292M) (ITU-RBT601) per screen (BNC)
YPrPb Component (3 BNC)
Composite Video PAL/NTSC auto detect
D65 and User Adjustment
SMPTE-C/EBU 80% CIE
Typical +/- 3% with 5 IRE increments (0 to 10 IRE)
10.8 to 13.2 VDC
Approx. 40 watt nominal
H/V Delay
Color temperature
Color Gamut
Luma Linearity
Power Required
Power Consumption
Operating temperature
Storage temperature
Compliance
Use to SELECT display of horizontal and vertical blanking areas.
Not available for all signal types.
Under Scan
32° F to 120° F (0° C to 50° C)
Use SELECT to reduce the display area with expansion beyond active video. Note that the
V-R82DP-HD is factory adjusted to display 100% of active video in standard display mode.
This function is normally used with analog Standard definition signals. SDI signals will dis-
play all video with ancillary data appearing to the right of the image.
-4 F to 120° F (-20° C to 50° C)
₠, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHS WEE / Environmental
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
Marshall Electronics
V-R82DP-HD Users Guide
7
2
Download from Www.Somanuals.com. All Manuals Search And Download.
|