Marshall Electronics
Broadcast Multimedia Division
15” Rackmountable
LCD PANEL with
Audio
Marshall Electronics
V-R151P
El Segundo, California
www.LCDRacks.com
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION cont.
5. Menu Tree
1) TV
MONITOR
TV ON AIR
2) PC Monitor
CABLE TV
Page 4
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installation
3) VIDEO
1) Before Installation
nBefore using your monitor, make sure to read this manual carefully. In case of any problems
with installation, contact Marshall Electronics.
nThe monitor should be handled with caution and not be exposed to impact or shock.
nThe display area is highly prone to scratches. Use cleaner suggested by the authorized
service center.
nDo not expose the monitor in high temperature or in high humidity.
nThere are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not
open your monitor case!
2) Components
Rackmountable TFT LCD Monitor- 1 pc
DC Power Supply Adapter -1 pc
Power Cable 1- pc
4) OSD ( On Screen Display) control
Computer Cable 1 pc
3) Operation
Multiple Input Terminal
Press Menu Select (System Setting) Select OSD U/D) or OSD L/R)
use the UP, DOWN keys
4) Tally
The V-R151P comes with a tally light installed at the top right-hand corner of the unit. The light
is operated by inserting a 2.5mm plug into the jack marked ‘TALLY’ on the rear of the unit. The
light will come on by closing the two contacts together. DO NOT GIVE POWER TO THIS
PLUG IT IS SELF-POWERED.
5) System Control Menu Tree
PC
0
0
TV
COMPOSITE S-VHS
5) Mounting
HORIZONTAL PAN
VERTICAL PAN
VALUE DEFAULT
CHANNEL ADD / REMOVE
TV=AIR CH
The V-R151P is designed to fit in a
EIA standard 19” rack. It requires 6
rack units of vertical space and is
secured with eight screws. It may be
necessary to center the unit up or
down so that it does not touch any
adjacent units when the unit is tilted
up or down.
0
0
0
0
0
0
0
0
MODE
INPUT CONDITION
VOLUME ADJUSTMENT
BRIGHTNESS
CONTRAST
HUE
COLOR
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Page 3
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Computer
2. TV Mode
1) Computer Mode Selection
1) TV Mode Selection
Press
Press
(INPUT) using the UP, DOWN keys press
(INPUT) Using UP, DOWN keys
(SYSTEM SETTING)
(TV)
(MONITOR) and than press select.
2) Value Default
Press
2). Horizontal Pan / Vertical Pan Control
(VALUE
Press
(HORIZONTAL PAN ) or (VERTICAL PAN) control
DEFAULT System control values will be initialized as this monitor is
originally manufactured.
(HORIZONTAL PAN) or (VERTICAL PAN) by pressing the UP, DOWN keys.
3) Value Default
Press
3) Channel ADD / Remove
(SYSTEM SETTING) press
(VALUE
Press
(CHANNEL ADD/ REM) when you select a
DEFAULT) press
monitor is manufactured.)
(System control values will be initialized as this
channel which has already been added, (ADD/REMOVE) will turn into
(REMOVE) to remove the channel from your favorite channel list. To
add the channel,
(ADD) and press
.
4) Color Change
Press
(COLOR CHANGE)
one of 4 modes to set
4) Air/ Cable TV
Press
(AIR) or (CABLE)
you can control selected sub-menu with the UP, DOWN keys press
sub-menu (4 color mode) will appear repeat the above steps
until you have settled color change press
you will be asked whether (SAVE YES) or (SAVE NO)
two options.
(SYSTEM SETTING)
(TV)
when you press menu,
one of the
5)Volume Adjust
Press
(VOLUME ADJUST) Use UP, DOWN keys
Color Change sub-menu will be limited to Brightness/Contrast only.
(If you press menu before selecting (SAVE YES), color will become invalid.)
press
(If you press
before pressing
, volume
adjust will become invalid.)
5) Input Condition Control
6) Color Change
Press
to set you can control
Press
(SYSTEM SETTING)
(INPUT
(COLOR CHANGE)
one of 4 modes
CONDITION)
one of the five modes to set.
sub-menu with UP, DOWN keys
Control the selected sub-menu with Select key
After tuning is settled, use key to escape from menu tree
press
sub-menu (4 color mode) will appear repeat the
above steps until you have settled color change press
when you press
(SAVE NO)
, you will be asked whether (SAVE YES) or to
one of the two options.
(If you press menu before selecting (SAVE YES,) color change will
become invalid.)
Page 6
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION cont.
4. Composite Video / S-VHS
POWER SUPPLY
1) Composite Video / S-VHS Selection
By Remote Control
Press
or
on remote control directly.
By Menu key
Press
(INPUT) using the UP, DOWN keys press
(COMPOSITE) or
(S-VHS) and than press
2) Value Default
Press
(MODE) press
(NTSC) or (PAL) depends on manu-
factured country Video Mode will not work on (TV) and (Monitor)
CAMCORDER / Composite Video / DVD
3) Volume Adjust
Press
(VOLUME ADJUST) use the UP, DOWN keys press
(If you press menu before pressing select, volume adjust will become invalid, )
4) Color Change
Press
(COLOR CHANGE)
one of 4 modes to set you can control
sub-menu (4 color mode will
selected sub-menu with the UP, DOWN keys press
appear repeat the above steps until you have settled color change press
when
you press
, you will be asked whether (SAVE YES) or (SAVE NO)
one of the
two options.
(If you press menu before selecting (SAVE, YES) color change will become invalid.)
S-VHS
Page 8
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
|