Marshall Electronics
M-LCD7-HDMI
M-LCD7-HDMI-B-C511
M-LCD7-HDMI-B-CE6
M-LCD7-HDMI-B-NEL3
Portable 7’’ HDMI TFT LCD Monitor
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Carefully unpack the M-LCD7-HDMI monitor and verify that the following items are included:
■ AC model (M-LCD7-HDMI) includes:
ƒ M-LCD7-HDMI Monitor
ƒ AC Power Supply
ƒ HDMI Cable
ƒ HDNI – MINI HDMI Cable
ƒ Car Cigarette Adapter
ƒ Table Stand
ƒ PC Cable [9-pin VGA Cable]
ƒ Multi-function input cable [SKS Cable]
ƒ Camera mount
ƒ Remote control
ƒ Operating Instructions
■ DC model (M-LCD7-HDMI-B-XXX) includes the following additional items:
ƒ Battery (Canon B511, or Nikon EN-EL3E, or Canon LP-E6)
ƒ Battery mount
ƒ Mounting plate
ƒ Power DC cable
ƒ Hood
ƒ Battery charger
When storing the monitor for extended lengths of time, please remove the battery or unplug the
battery from the monitor.
Inspect the unit for any physical damage that may have occurred during shipping. If there is any
damage, immediately call Marshall Electronics Customer Service at (800) 800-6608. If you are not
located within the continental United States, call +1 (310) 333-0606.
M-LCD7-HDMI Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
■ Product Description ........................................................................................................... 4
ƒ Remote Control .......................................................................................................... 5
ƒ Matched Cable ............................................................................................................ 5
ƒ Connection ................................................................................................................. 6
■ Operating Instructions ....................................................................................................... 7
■ Specifications ..................................................................................................................... 13
■ Accessories ......................................................................................................................... 13
■ Troubleshooting .................................................................................................................. 14
■ Warranty .............................................................................................................................. 15
Product Description
■ Description of Monitor
1. Indicator light
2. : Power on/off
3. AV/PC: AV/PC switch
4. : Volume down or to adjust the value setting function
5. Infrared receiver
6. : Volume up or to adjust the value of setting function
7. MENU: To activate OSD menu
8. : Selection key, to adjust phase directly
9. : Selection key, to adjust brightness directly
10. DC12V: DC12V input jack
11. HDMI: HDMI input jack
12. SKS: SKS input jack
4
M-LCD7-HDMI Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Description
■ Remote Control
1.
: Power on/off
2.
: MUTE
3.
: To activate OSD Menu
4.
: Volume down, or to adjust the value of setting function
: Volume up, or to adjust the value of setting function
: Selection key, the brightness adjustment
: Selection key, the phase adjustment
: Aspect ratio switch, 4:3 or 16:9
: Up/Down Switch
5.
6.
7.
8.
9.
U/D
L/R
10.
11.
: Right/Left Switch
: AV1/AV2/PC Switch
■ Matched Cable
1. SKS input connector to be connected to SKS input
jack on monitor
2. Male 9-pin plug for VGA signal
3. DC12V power
4. Yellow RCA jack for video 1
5. White RCA jack for audio
6. Red RCA jack for video 2
Picture 3 (AV cable)
M-LCD7-HDMI Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Description
Picture 4 (VGA cable)
1. Female 9-pin jack connects to male 9-pin plug on picture 3
2. 15-pin VGA signal input end connects to computer VGA port
■ Connection
1. Connect SKS input end of the AV cable (picture 3) into the AV input jack of the monitor.
The other jack of the AV cable should be connected as follows:
2. Male 9-pin plug of picture 3 is connected to female 9-pin jack of picture 4; the VGA
signal input end of picture 4 will be connected to the VGA port at the back of the
computer. Tighten the screws.
3. Black jack connects to DC12V power
4. Yellow RCA jack connects to video signal 1
5. White RCA jack connects to audio signal
6. Red RCA jack connects to video signal 2
Please use the included DC adapter. (Note that the power consumption should be less or equal to
10W.)
6
M-LCD7-HDMI Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Operation
After connecting to power, the unit will be in standby mode (red light). Press the power button on the
unit or on the remote control and the buttons of the unit will light up blue. Press the same button again
and the unit will return to standby mode. (Note the blue button will shut off 5 or 6 seconds after you
turn the unit off.) Push “PC/AV” on the unit or AC/PC on the remote control to switch between AV and
PC.
■ OSD in PC Mode:
■ OSD in AV Mode:
You can press “ ” or “ ” on the unit or on the remote control to select the items: (Color), (Adjust),
(Menu), (Edit), (Volume), and confirm by pressing “ ” or ” ” on the unit or on the remote control.
Then push “ ” or ” ” again to adjust the values. Push “
” to exit the OSD after your adjustment.
M-LCD7-HDMI Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
■ Description of OSD:
ƒ In PC mode:
(Color)
■ In Color mode of OSD, use “ ” or ” ” to select and then push “ ” or ” ” to adjust.
ƒ Brightness: To adjust the brightness
ƒ Contrast: To adjust the contrast
ƒ Color Temp: To adjust the color temperature
The color temperature of OSD is adjustable. Press “</>” on the unit or on the remote control to select
“Color Temp,” then choose a color temperature such as 6500 Ks, 7500 Ks or 9300 Ks by pressing “ ”
or ” ”. You can also adjust color temperature by selecting “USER” and adjusting the RED, GREEN,
and BLUE by pushing “ ” or “ ” until desired color value is achieved.
8
M-LCD7-HDMI Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Note: when you select “USER,” a mini box will appear on the bottom right corner of the OSD, as pic-
tured below:
■ (Adjust):
ƒ Auto Config: To automatically adjust to factory default setting
If the auto adjust is not satisfactory, use manual adjust.
ƒ H Position: To adjust the picture horizontally
ƒ V Position: To adjust the picture vertically
ƒ Phase: To adjust the phase
ƒ Clock: To adjust the clock for field and line synchronization
■ (OSD):
M-LCD7-HDMI Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
■ Language: language selection:
ƒ H Position: To adjust the picture in horizontal
ƒ V Position: To adjust the picture in vertical
ƒ OSD Time out: To adjust the clock
ƒ Transparent: To adjust the level of transparency
■ (Function):
ƒ Reset: Back to the original factory setting
ƒ Display Ratio: To change the display ratio: 16:9, 4:3
ƒ LR Rotation: To change the picture left/right
ƒ UD Rotation: To change the picture up/down
■ Sound
Volume: To adjust the volume.
10
M-LCD7-HDMI Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
■ In AV mode:
■ Color:
ƒ Brightness: To adjust the brightness
ƒ Contrast: To adjust the contrast
ƒ Hue: To adjust the hue in NTSC mode
ƒ Saturation: To adjust the saturation
■ OSD:
■ Language: 8 languages for OSD as shown above:
ƒ H Position: To adjust the picture in horizontal
ƒ V Position: To adjust the picture in vertical
ƒ OSD Time out: To adjust the clock
ƒ Transparent: To adjust the level of transparency
M-LCD7-HDMI Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
■ Function:
ƒ Reset: Manufacturer default setting
ƒ Display Ratio: To change the display ratio: 16:9, 4:3
ƒ LR Rotation: To change the picture (mirror image flip)
ƒ UD Rotation: To change the picture up/down
■ Sound:
Volume: To adjust the volume
12
M-LCD7-HDMI Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
M-LCD7-HDMI
Display Panel
TFT LCD 7’’
1152000 Pixels
Resolution
800x480 (VGA)
Up Resolution
Brightness
1920x1440 (VGA)
2
300 cd/m
Contrast
500:1
Viewing Angle
Video Signal Input
VGA Signal Input
70o /70o, 50o /60o (L/R, U/D)
0.7 ~ 1.4Vp-p/75 Ohms
H:30 ~ 60kHz
V:60 ~ 75Hz
Speaker
> 250mW/8 Ohms
Color System
Voltage
PAL -4.43; NTSC -3.58
+
DC12V 10%
Signal Input
PC (VGA) AV1, AV2 (HDNI 619 optional)
Power Consumption
Work Temperature
Store Temperature
Size (mm)
< 6w
-20 ~ 55oC
-30 ~ 65oC
188(L) x 129(W) x 40(H)
12 oz.
Weight (w/o battery)
Battery Compatibility
7-BP970G-CM
7-BN-V438U-JM
7-CGS-D54-PM
7-VW-VBG6-PV
7-NP-QM91-SM
7-NP-F970-SL
Canon BP-970G Battery assembly
JVC BN-V438U Battery assembly
Panasonic CGA-D54 Battery assembly
Panasonic VW-VBG6 Battery assembly
Sony NP-QM91 Battery assembly
Sony NP-F970 Battery assembly
M-LCD7-HDMI Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
■ Only black and white image
ƒ Adjust the levels of color saturation and brightness
■ Power on but no picture
ƒ Make sure the AV and VGA cable are secure from the video out connector & VGA signal
output connector. Make sure you are using the standard power adapter included with the
monitor.
■ Wrong or abnormal colors
ƒ If any color is missing, check the cables to make sure they are securely connected. Broken
or loose pins in the cable connector can cause a bad connection.
■ Remote control doesn’t work
ƒ Check that the battery is installed properly. Also make sure the battery is not low. Make sure
the signal is not being blocked by obstructions.
■ Battery drain while the monitor is off
ƒ Unplug the battery cable
ƒ Remove the battery
■ Other problems
ƒ If intermittent image occurs, it may be that the VGA signal frequency isn’t matched with
normal standard.
ƒ It is a normal for some bright lines to appear on screen when you turn the unit.
14
M-LCD7-HDMI Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Marshall Electronics warranties to the first consumer that this M-LCD7-HDMI LCD monitor will, under
normal use, be free from defects in workmanship and materials, when received in its original container,
for a period of one year from the purchase date. This warranty is extended to the first consumer only,
and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided
with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the prod-
uct exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construc-
tion void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail
on the periphery of the display active viewing area. Marshall Electronics reserves the option to refuse
service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
No sales personnel of the seller or any other person is authorized to make any warranties other than
those described above, or to extend the duration of any warranties on behalf of Marshall Electronics,
beyond the time period described above. Due to constant effort to improve products and product fea-
tures, specifications may change without notice.
M-LCD7-HDMI Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Marshall Electronics, Inc.
1910 East Maple Ave.
El Segundo, CA 90245
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
MLCD7HDMI-BManV1
Download from Www.Somanuals.com. All Manuals Search And Download.
|