Marshall Amplification Home Theater Server BD 0314 User Manual

BD-0314  
SDI VIDEO DISTRIBUTION AMPLIFIER  
Marshall  
To operate unit, insert the power plug (Marshall V-PS6-1.2A)  
into the power jack located on the rear of the unit and twist  
the sleeve to lock the connector on. The unit is automatically  
turned on when power is supplied to the unit and indicated  
by the power LED on the front of the unit. Supply a  
NTSC/PAL SDI video signal (SMPTE 259M) to the video  
BNC connector labeled SDI IN.  
Installing the hard mount brackets: Your BD-0314 comes  
with two brackets that allow the unit to be hard mounted to  
any surface with 4 screws. By removing the middle screw  
on the enclosure, position the bracket and then replace the  
screw. After both brackets are installed, place the unit in the  
desired location and mark the holes using a pencil.  
Each unit comes with 4 self-adhesive rubber feet to be  
placed on the bottom of the unit to protect any surface that it  
may be set upon. Available accessories include a space  
saving stand that holds the unit in a vertical position or a rack  
mountable face panel that holds multiple units in a 1U space.  
For more information please visit www.LCDRacks.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Land Pride Lawn Mower FDR2560 User Manual
Leviton Indoor Furnishings 80301 User Manual
LG Electronics Cell Phone VX4270 User Manual
LG Electronics Dishwasher LDF7810BB User Manual
Life Fitness Bicycle 95R ALLXX 01 User Manual
Lightolier Indoor Furnishings 1103R User Manual
Makita Portable Radio BMR100 User Manual
Martin Audio Stereo Amplifier MA28s User Manual
Memorex DVD Player MMP8568 HIT User Manual
Metra Electronics Car Stereo System 99 7009 User Manual