Model SC-11S1 User Guide
Stereo Control Amplifier
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly aware of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information!
• This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
• Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on
the apparatus.
• When the switch is in the OFF position, the apparatus isn’t completely switched-off from the MAINS.
• The equipment shall be installed near the Socket-Outlet and shall be easily accessible.
Do not touch hot spots during and immediately after use.
During and immediately after use, this product is hot in areas other than the controls and rear panel connection jacks. Do not touch
hot spots and especially the top panel. Contact with hot areas can cause burns.
Do not expose the unit to excessive heat such as direct sunlight, fire or the like.
AMP_070719U2
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
NEDERLANDS
WARRANTY
GARANTIE
For warranty information, contact your local Marantz distributor.
Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke
Marantz.
RETAINYOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase.
It should be kept in a safe place to be referred to as necessary for
insurance purposes or when corresponding with Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van
een waardevol artikel en dienen op een veilige plaats bewaard te
worden voor evt, verwijzing bijv, in verbend met verzekering of bij
correspondentie met Marantz.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to
establish proof and date of purchase. Your purchase receipt or invoice is
adequate for such proof.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de
consument een gedateerd bewijs van aankoop te tonen. Uw kassabon
of factuurzijn voldoende bewijs.
FOR U.K. ONLY
This undertaking is in addition to a consumer's statutory rights and
does not affect those rights in any way.
ITALIANO
FRANÇAIS
GARANZIA
L’apparecchio è coperto da una garanzia di buon funzionamento della
durata di un anno, o del periodo previsto dalla legge, a partire dalla
data di acquisto comprovata da un documento attestante il nominativo
del Rivenditore e la data di vendita. La garanzia sarà prestata con la
sostituzione o la riparazione gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata
installazione, manutenzione effettuata da personale non autorizzato
o, comunque, da circostanze che non possano riferirsi a difetti di
funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia
gli interventi inerenti l’installazione e l’allacciamento agli impianti di
alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza
Autorizzati. Le spese ed i rischi di trasporto sono a carico del cliente.
La casa costruttrice declina ogni responsabilità per danni diretti o indiretti
provocati dalla inosservanza delle prescrizioni di installazione, uso e
manutenzione dettagliate nel presente manuale o per guasti dovuti ad uso
continuato a fini professionali.
GARANTIE
Pour des informations sur la garantie, contacter le distributeur local
Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur.
La conserver en lieu sur pour s'y reporter aux fins d'obtention d'une
couverture d'assurance ou dans le cadre de correspondances avec
Marantz.
IMPORTANT
Pour l'obtention d'un service couvert par la garantie, il incombe au
client d'établir la preuve de l'achat et d'en corroborer la date. Le reçu
ou la facture constituent des preuves suffisantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler.
HEBEN SIE IHRE QUITTING GUT AUF
Die Quittung dient Ihnen als bleibende Unterlage für Ihren wertvollen
Einkauf Das Aufbewahren der Quittung ist wichtig, da die darin
enthaltenen Angaben fürVersicherungswecke oder bei Korrespondenz
mit Marantz angeführt werden müssen.
WICHTIG!
Bei Garantiefragen muß der Kunde eine Kaufunterlage mit
Kaufdatum vorlegen. Ihren Quittung oder Rechnung ist als Unterlage
ausreichend.
Download from Www.Somanuals.com. All Manuals Search And Download.
Français
CE MARKING
AVERTISSEMENTS
-
Ne pas exposer l’appareil à la pluie, à l’humidité, à l’égouttement ou
aux éclaboussures.
English
The SC-11S1 is in conformity with the EMC directive and
low-voltage directive.
- Ne pas essayer de retirer le boîtier de l’appareil.
- Ne rien insérer dans l’appareil par les orifices de ventilation.
Français
- Ne pas manipuler le cordon d’alimentation avec les mains
mouillées.
- Ne pas recouvrir les ouïes de ventilation avec un objet quelconque
comme une nappe, un journal, un rideau, etc.
- Ne placer aucune source de flamme nue, comme une bougie
allumée, sur l'appareil.
- Pour mettre au rebut les piles usées, respecter les lois
gouvernementales ou les règlements officiels concernant
l’environnement qui s'appliquent à votre pays ou région.
Le SC-11S1 est conforme à la directive EMC et à la directive
sur les basses tensions.
Deutsch
Das Modell SC-11S1 entspricht den EMC-Richtlinien und
den Richtlinien für Niederspannungsgeräte.
Nederlands
De SC-11S1 voldoet aan de EMC eisen en de vereisten
voor laag-voltage.
- Veiller à ce qu’aucun objet ne soit à moins de 0,2 mètre des côtés
de l'appareil.
- Aucun objet rempli de liquide, un vase par exemple, ne doit être
placé sur l'appareil.
- Lorsque l'interrupteur est sur la position OFF, l'appareil n'est pas
complètement déconnecté du SECTEUR (MAINS).
Italiano
Il SC-11S1 è conforme alle direttive CEE ed a quelle per i
bassi voltaggi.
- L'appareil sera installé près de la source d'alimentation, de sorte que
cette dernière soit facilement accessible.
- Ne pas toucher aux zones chaudes pendant et immédiatement
après l’utilisation.
- Pendant l’utilisation et immediatement apres, cet appareil est chaud
en dehors des commandes et des prises de raccordement arriere.
Ne pas toucher aux zones chaudes, et particulièrement au panneau
supérieur, pour éviter tout risque de brûlure.
English
WARNINGS
- Do not expose the equipment to rain, moisture, dripping or
splashing.
- Do not remove the cover from the equipment.
- Do not insert anything into the equipment through the ventilation
holes.
- Do not handle the mains cord with wet hands.
- Ne pas exposer l’appareil à une chaleur excessive, comme celle des
rayons directs du soleil, d’un feu, etc.
- Do not cover the ventilation with any items such as tablecloths,
newspapers, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed
on the equipment.
Deutsch
WARNHINWEISE
- Das Gerät nicht Regen, Feuchtigkeit, Tropf- oder Spritzwasser
aussetzen.
- When disposing of used batteries, please comply with governmental
regulations or environmental public instruction’s rules that apply in
your country or area.
- Die Abdeckung nicht vom Gerät abnehmen.
- Make a space of about 0.2 meter around the unit.
- No objects filled with liquids, such as vases, shall be placed on the
equipment.
- When the switch is in the OFF position, the equipment is not
completely switched off from MAINS.
- The equipment shall be installed near the power supply so that the
power supply is easily accessible.
- Keine Gegenstände durch die Belüftungsschlitze stecken.
- Das Netzkabel nicht mit feuchten oder nassen Händen anfassen.
- Decken Sie die Lüftungsöffnungen nicht mit einem Tischtuch, einer
Zeitung, einem Vorhang usw. ab.
- Es dürfen keine Gegenstände mit offener Flamme, wie etwa
brennende Kerzen, auf dem Gerät aufgestellt werden.
- Beachten Sie bei der Entsorgung der verbrauchten Batterien alle
geltenden lokalen und überregionalen Regelungen.
- Do not touch hot spots during and immediately after use.
- Auf allen Geräteseiten muß ein Zwischenraum von ungefähr 0,2
meter vorhanden sein.
- Auf das Gerät dürfen keine mit Flüssigkeiten gefüllte Behälter, wie
etwa eine Vase, gestellt werden.
- During and immediately after use, this product is hot in areas other
than the controls and rear panel connection jacks. Do not touch hot
spots and especially the top panel. Contact with hot areas can cause
burns.
- Wenn der Schalter ausgeschaltet ist (OFF-Position), ist das Gerät
nicht vollständig vom Stromnetz (MAINS) abgetrennt.
- Do not expose the unit to excessive heat such as direct sunlight, fire
or the like.
- Das Gerät sollte in der Nähe einer Netzsteckdose aufgestellt
werden, damit es leicht an das Stromnetz angeschlossen werden
kann.
- Berühren Sie während oder unmittelbar nach dem Gebrauch keine
heißen Stellen des Gerätes.
- Während oder unmittelbar nach dem Gebrauch ist dieses Produkt
mit Ausnahme der Bedienelemente und der Anschlussbuchsen
auf der Rückseite heiß. Berühren Sie die heißen Stellen und
insbesondere die Oberseite nicht. Der Kontakt mit heißen Flächen
kann zu Verbrennungen führen.
- Setzen Sie das Gerät keiner übermäßigen Wärme aus, z.B. durch
Aufstellung in direkter Sonneneinstrahlung, in der Nähe eines
offenen Feuers usw.
Download from Www.Somanuals.com. All Manuals Search And Download.
Nederlands
WAARSCHUWINGEN
- Stel het apparaat niet bloot aan regen, vocht, druppels of spetters.
- Verwijder de afdekplaat van het apparaat niet.
- Duw niets door de ventilatieopeningen in het apparaat.
- Raak het netsnoer niet met natte handen aan.
- Bedek de ventilatieopeningen niet met enige voorwerpen, zoals
tafelkleden, kranten, gordijnen, enz.
- Plaats geen brandende voorwerpen, zoals kaarsen, op het
apparaat.
- Volgbijhetweggooienvanverbruiktebatterijendeoverheidswetgeving
of milieuvoorschriften op die van kracht zijn in het land of de regio
waarin u zich bevindt.
- Zorg dat er 0,2 meter vrije ruimte rond het toestel is.
- Plaats geen voorwerpen met een vloeistof erin, zoals een
bloemenvaas, op het apparaat.
- Als de schakelaar op OFF staat, is het apparaat niet volledig
losgekoppeld van de netspanning (MAINS).
- De apparatuur wordt in de buurt van het stopcontact geïnstalleerd,
zodat dit altijd gemakkelijk toegankelijk is.
- Raak hete gedeelten van het apparaat niet aan tijdens en
onmiddellijk na het gebruik.
- Tijdens en onmiddellijk na het gebruik is dit product heet, behalve
in de omgeving van de bedieningstoetsen en de aansluitingen
op het achterpaneel. Raak geen hete plekken aan, vooral niet
het bovenpaneel. Contact met hete plekken kan brandwonden
veroorzaken.
- Stel het apparaat niet bloot aan grote warmte, zoals direct zonlicht,
vuur en dergelijke.
Italiano
AVVERTENZE
- Non esporre l’apparecchio alla pioggia, all’umidità, al gocciolamento
o agli spruzzi.
- Non rimuovere il coperchio dell’apparecchio.
- Non introdurre oggetti all’interno dell’apparecchio attraverso i fori di
ventilazione.
- Non toccare il cavo di alimentazione con le mani bagnate.
- Non coprire le fessure di ventilazione con tovaglie, giornali, tende od
oggetti analoghi.
- Non posare sull'apparecchio sorgenti di fiamme scoperte quali
candele accese.
- Smaltire le pile usate in conformità alle norme governative o
disposizioni ambientali vigenti nel proprio paese o zona.
- Lasciare 0,2 metro liberi tutto intorno l'unità.
- Non mettere sull'apparecchiatura alcun contenitore di liquido, come
ad esempio dei vasi.
- Quando l'interruttore è nella posizione OFF, l'apparecchiatura non è
completamente scollegata da MAINS.
- L’apparecchio va installato in prossimità della fonte di alimentazione,
in modo che quest’ultima sia facilmente accessibile.
- Non toccare i punti caldi né durante, né immediatamente dopo
l’uso.
- Durante, e subito dopo l’utilizzo, questo prodotto risulta essere molto
caldo in alcune sue parti come ad esempio i connettori del pannello
posteriore. Non toccare i punti caldi e specialmente la superficie del
pannello. Il contatto con parti calde può provocare ustioni.
- Non esporre l’unità ad eccessivo calore come la luce diretta del sole,
il fuoco o simili.
AMP_070719N1
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing this Marantz SC-11S1 Stereo Control Amplifier.
Please read these operating instructions carefully.We recommend that you read the entire user guide before
you attempt to connect or operate the player.
After you have reviewed the contents of this manual, we suggest that you make all system connections before
you attempt to operate the unit.
7 Checking the accessories
After opening the cover of the packing box, check that the following accessories are included.
• Remote controller
OPEN/
CLOSE
SOUND
MODE
PHONO
BALANCED
CD
RECORDER
1
LINE
1
RECORDER
TRIM
2
LINE
2
EXIT
+
TONE
L
R
ENTER
DISPLAY
-
ATT
VOLUME
RANDOM
SCAN
REPEAT
MENU
TOP MENU
AM/A
RETURN
FM/B
• Size “AAA” batteries x 2
• AC Power cord
SC-11S1 (U.S.A.)
A NOTE ABOUT RECYCLING
SC-11S1 (Europe)
This product’s packaging materials are recyclable
and can be reused. This product and the accessories
packed together are the applicable product to the WEEE
directive except batteries.
• User Guide
Please dispose of any materials in accordance with your
local recycling regulations.
When discarding the unit, comply with your local rules
or regulations.
• Warranty Card (U.S.A)
(U.S.A. x 1, Canada x 1)
Batteries should never be thrown away or incinerated
but disposed of in accordance with your local regulations
concerning chemical wastes.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
FEATURES..................................................................................................................3
BEFORE USING..........................................................................................................4
EQUIPMENT MAINS WORKING SETTING.......................................................................................4
COPYRIGHT......................................................................................................................................4
INAPPROPRIATE PLACES FOR INSTALLATION .............................................................................4
NAMES AND FUNCTIONS OF PARTS ......................................................................6
FRONT PANEL...................................................................................................................................6
DISPLAY ............................................................................................................................................7
REAR PANEL.....................................................................................................................................8
REMOTE CONTROLLER ..................................................................................................................9
CONNECTIONS ........................................................................................................11
BALANCED JACKS .........................................................................................................................11
SPEAKER POSITIONING FOR SUPER AUDIO MULTI-CHANNEL SOUND..................................19
CONNECTING THE POWER SUPPLY............................................................................................19
BASIC OPERATION..................................................................................................20
PLAYBACK.......................................................................................................................................20
HOW TO USE AND SET FEATURES........................................................................21
ATT. (ATTENUATION) ......................................................................................................................21
SUBSONIC FILTER ........................................................................................................................21
TRIMMING.......................................................................................................................................22
HOW TO OPERATE THE SIDE ILLUMINATION .............................................................................24
BI-AMP MODE.................................................................................................................................24
REMOTE POWER CONTROL ........................................................................................................25
F.C.B.S. ............................................................................................................................................26
HOW TO SET ID NUMBERS ..........................................................................................................27
TROUBLESHOOTING...............................................................................................28
SPECIFICATIONS & DIMENSIONAL DRAWINGS...................................................29
OTHERS ....................................................................................................................30
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
DISPLAY
ATT.
PHONO
MC
TONE
OPERATE
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
This unit was developed with many of the same functions as
the flagship model SC-7S2, without compromising the sound
quality.
¶ Choke Input Power Circuit
This unit incorporates a choke input power circuit in order to
thoroughly eliminate high frequency noise from the rectifier
circuit and external sources. The choke input power supply
is a powerful, clean power circuit that stores electrical power
in the coil and capacitor, and then supplies it to the amplifier
circuit.
¶ HDAM-SA3
The HDAM-SA3 is an amp module equipped with a new circuit
that has further improved stability from the previous HDAM-SA
and HDAM-SA2. The HDAM-SA3 is an essential part of this
unit’s amp module, incorporated into many components such
as the current-voltage converter and input buffer.
¶ Tone Control
This unit is equipped with an electronic tone control circuit that
adjusts the sound balance using the remote control unit. This
tone control circuit can be precisely adjusted with the Balance
Linear Control Volume.
¶ Constant Current Feedback Phono
Equalizer
The new phono equalizer keeps current feedback constant
from low to high frequency, and supports both MC and MM
cartridges. This has enabled problems in sound quality found
in conventional NFB type phono equalizers that resulted from
differences in the amount of NFB in the bass and treble regions
to be overcome.
¶ Subsonic Filter
Subsonic signals are intercepted in the cut-off frequency 15Hz
(12dB/oct) by the subsonic filter.The subsonic filter is an active
filter used in the HDAM-SA3.
¶ F.C.B.S.
¶ Balanced Linear Control Volume
A Floating Control Bus System (F.C.B.S.) enables the user
to connect up to four units, making a diversity of applications
possible with bi-amp and multi-channel connections. Moreover,
a ground loop is not formed between multiple connected
amplifiers, therefore sound quality is not adversely affected.
The newly developed balanced output type volume control
amplifier incorporates a combination of the WM8816 by
Wolfson with the Marantz original current-feedback amplifier.
This balanced linear control amplifier is a high performance
amplifier that allow to control the sound volume and to convert
the balance signal.
¶ BI-AMP Mode
The operating mode that uses the complete bi-amp connection
proposed by Marantz.Complete bi-amp allows two SC-11S1 to
be connected by F.C.B.S.enabling each to work as a monaural
Integrated amplifier.
¶ Balanced Input Headphone System
This is a balanced input current feedback headphone amplifier
newly developed for use with the Balanced Linear Control
Volume. This power amplifier is special combination of a
high quality sound operational amplifier and discrete current-
feedback type amplifier specifically for headphone use.
¶ Display
This unit adopts an LCD (Liquid Crystal Display) to display input
source and volume level. Compared to other types of display
panels, an LCD generates less drive noise and radiation noise,
hence the interference in sound quality is minimal.
¶ Input Buffer
With the exception of the PHONO input, each input has its
own input buffer that directly uses HDAM-SA3 technology.
You will experience superb sound with unbelievable channel
separation.
¶ Remote Power Control
This unit is equipped with a trigger output jack that can
simultaneously operate the power ON/OFF control of a Marantz
SM-11S1 power amplifier in sync with the power ON/OFF
control of this unit. Up to two SM-11S1 can be connected to
this unit. As with the F.C.B.S. a ground floating connection is
made without a ground loop being formed, therefore sound
quality is not adversely affected.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING
This section must be read before any connection is made to
the mains supply.
INAPPROPRIATE PLACES FOR
INSTALLATION
To keep your player in perfect working order for the longest possible
time, avoid installing the player in the following locations.
EQUIPMENT MAINS WORKING
SETTING
• Wherever it will be exposed to direct sunlight
• Wherever it will be close to a heater or other heat-radiating
appliance
Your Marantz product has been prepared to comply with the
household power and safety requirements that exist in your area.
• Wherever the humidity is high or ventilation is poor
• Wherever it is very dusty
— Power requirements (U.S.A.) ....................AC 120V 60Hz
— Power requirements (Europe)..............AC 230V 50/60Hz
• Wherever it will be subject to vibration
• On top of a rickety stand or in an unstable location which is
tilted at an angle
COPYRIGHT
• In an audio rack with little space at the top and bottom or other
location where the heat dissipation will be obstructed
Recording and playback of any material may require consent.
For further information refer to the following:
To ensure proper heat dissipation, install the player while
leaving clearances between the player and wall or other
components, as shown in the figure below.
— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— Any subsequent statutory enactments and orders
0.2 m or more
0.2 m
0.2 m
DISPLAY
ATT.
or more
or more
PHONO
MC
TONE
OPERATE
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
0.2 m or more
7 Do not place objects on top
• Refrain from placing any objects on top of the player.
7 Cautions on handling power cord
• Do not touch the power cord with wet hands.
• When disconnecting the power cord, always make sure that
you take hold of the plug. Yanking out or bending the cord
can damage it and/or cause electric shocks or a fire.
• Get into the habit of disconnecting the power plug before
leaving home.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING
7 Loading batteries
7 Usage of remote controller
Operational range
Operate the unit with the remote controller within the range of
the illustration below.
Before using the remote controller for the first time, load the
batteries in the remote controller. The batteries provided are
used to verify the operations of the remote controller only.
1. Remove the battery cover.
Approx. 5m
2. Insert the batteries with correct +/– orientation.
60
Two AAA-size (R03) batteries
Remote controller
Precautions
• Do not allow direct sunlight, an inverter fluorescent light or
other strong source of light to shine onto the player’s infrared
signal reception window (remote sensor). Otherwise, the
operation of the remote control unit may be disabled.
3. Close the battery cover until it clicks shut.
• Bear in mind that operating the remote control unit may cause
other devices operated by infrared rays to be operated by
mistake.
• The remote control unit cannot be operated if the space
between the controller and the player’s remote sensor is
obstructed.
• Do not place any objects on top of the remote control unit.
Doing so may cause one or more buttons to be held down
which will cause the batteries to run down.
7 Cautions on handling batteries
Misuse of the batteries can result in electrolyte leakage,
rupturing, corrosion, etc.
Bear in mind the following points when using batteries.
• Remove the batteries from the remote control unit if the unit
is not going to be used for a prolonged period (a month or
more).
• Do not use an old battery together with a new one.
• Insert the batteries while ensuring that their ªand ·poles
are properly aligned with the corresponding markings on the
remote control unit.
• Batteries with the same shape may have different voltages.
Do not use different types of batteries together.
• If electrolyte has leaked, thoroughly wipe the inside of the
battery compartment, and then insert new batteries.
• When batteries which are no longer required are to be
discarded, follow the directions (regulations) laid down by the
local authorities in the area concerned for their disposal.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES AND FUNCTIONS OF PARTS
FRONT PANEL
!! o
i
u yt
DISPLAY
ATT.
PHONO
MC
TONE
OPERATE
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
!
!
q w e
r
q POWER ON/OFF Switch
u ATT. Button
This switch turns power to the unit ON and OFF. When
pressed, power is activated and the blue indicator in the
display w lights up. Pressing the switch again turns the
power OFF.
This button attenuates the volume with one press of the
button. For instructions on How to Set the Attenuation
Level, see page. 21.
i Illumination Lamp
w Display
The illumination lamp casts a blue light over the switches
and buttons. It can be turned ON and OFF with the
DISPLAY button. For instructions on HOWTO OPERATE
THE SIDE ILLUMINATION, see page. 24.
Indicate the selected input source, volume level, and
setting status.
e Infrared Receptor Window
o DISPLAY Button
This receptor window receives control signals sent from
the included remote controller.
This button turns the display and side illumination ON and
OFF. For instructions on HOW TO OPERATE THE SIDE
ILLUMINATION, see page. 24.
r VOLUME Knob
This knob is for setting the volume. The volume level
is displayed on the display w. When turned slowly, the
volume can be fine-adjusted in 0.5dB steps, whereas when
turned rapidly, the volume level changes greatly.
! TONE Button
This button turns the bass and treble tone control ON and
OFF. For instructions on How to Trim Bass and Treble,
see page. 23. If pressed and held for 2 seconds or longer,
this button switches the subsonic filter ON/OFF.For details
on SUBSONIC FILTER, see page 21.
t PRE OUT Button
This buttons turns output from the PRE OUT jack and
BALANCED PREOUT jack on the rear panel ON and
OFF. When using just the headphones, switch this button
OFF.
! PHONES OUT Button
This button switches the headphone jack output signal
ON/OFF. Set this to OFF when not in use.
y PHONO MC Button
! INPUT SELECTOR Knob
This button switches the Phono equalizer amplifier setting
between MC and MM. Set the phono equalizer amplifier
according to the type of cartridge you use.
This knob is for selecting the input source to use in
playback and recording. The selected input source is
displayed in the display w.
! PHONES Jack
This jack is for connecting headphones with a standard
stereo plug.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES AND FUNCTIONS OF PARTS
DISPLAY
VOLUME Indicator Volume Display
Max
!
!
Turn the VOLUME knob on the
unit to the right, or press the
VOLUME 5button on the remote
controller.
OPERATE
!
0.5dB Steps
! Power Indicator
This indicator is lit a blue color while power to the unit is
ON.
Turn the VOLUME knob on the
unit to the left, or press the
VOLUME ∞button on the remote
controller.
! Display Panel
Approximately 3 seconds after the power to the unit is
activated, the ID number is displayed here.
Min
After that, the top line displays the selected input source,
and the bottom line displays the volume level.The volume
attenuation (dB units) is displayed.
The display also displays the setting values when adjusting
the left-right level balance. For instructions on How to
Trim Volume Level, see page. 22. Other messages that
correspond to various operations are also displayed.
! OPERATE Indicator
This indicator flashes the operating status of the unit.
When the ID is set to “0” for standalone operation, it is lit
a red color. When multiple amplifiers are connected by
F.C.B.S., only ID number “1” for the master is lit red color.
The slave amplifier whose indicator does not light a red
color cannot be used to operate other units in sync.
For more information on F.C.B.S., see page. 26.
The indicator flashes red if a protective circuit trips.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES AND FUNCTIONS OF PARTS
REAR PANEL
A B
C
D
E F
G
H
PHONO INPUT
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
L
MODEL NO. SC-11S1
R
R
R
IN
OUT
IN
OUT
PUSH
PUSH
PUSH
PUSH
PHONO
GND
TRIGGER OUT
R
L
R
L
R
L
STEREO
BI-AMP
IN OUT
1
2
3
3
2
1
2
1
F.C.B.S.
AMP MODE
REMOTE POWER CONTROL
1
INPUT
2
BALANCED
PRE OUT
M
L
K
J
I
A PHONO GND Terminal
H AC IN Power Cable Connection Socket
Connect the grounding wire from an analog record player
here.
Connect this socket to the power outlet using the included
power cable.
B PHONO Input Jacks
I REMOTE POWER CONTROL Jack
(TRIGGER OUT)
These jacks are for connecting to an analog record player.
Both MC and MM cartridges can be used, therefore set
the PHONO MC button yon the front panel according to
the type of cartridge you are using.
This jack is for connecting to the TRIGGER IN jack of a
Marantz SM-11S1 stereo powered amplifier used when
simultaneously switching the power of both devices
ON/OFF. For more information on REMOTE POWER
CONTROL, see page. 25.
C CD Input Jacks
These jacks are for connecting to the output jacks of a
Super Audio CD player, etc.
J AMP MODE Switch
STEREO: Set to use this unit as an ordinary stereo control
amplifier.
BI-AMP: Set to use this unit in complete bi-amp
connection.
D LINE 1/2 Input Jacks
These jacks are for connecting to the output jacks of a
tuner, DVD player, etc.
For more information on BI-AMP MODE, see page. 24.
E RECORDER 1/2 Input Jacks
K F.C.B.S. IN/OUT Jacks
These jacks are for connecting to the output jacks of a
tape deck or other type of recording device.
These jacks are used to connect and synchronize up to
four amplifiers. For instructions on use and connections,
see F.C.B.S. (page. 26).
F RECORDER 1/2 Output Jacks
These jacks are for connecting to the recording input jacks
of a tape deck etc.
L BALANCED PRE OUT Jacks
These jacks are for connecting to the balanced input jacks
of a power amplifier.
G PRE OUT Jacks
These jacks are for connecting to the input jacks of a
power amplifier.
M BALANCED INPUT 1/2 Jacks
These jacks are for connecting to the balanced output
jacks of a Super Audio CD player, etc.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES AND FUNCTIONS OF PARTS
REMOTE CONTROLLER
z Input Selector Buttons
These buttons are for selecting the input source to use
in playback.
This remote controller can be used to control the SC-11S1 and
Marantz Super Audio CD players or DVD players that have a
remote control receptor. The operations possible by remote
control may differ with each component, therefore see the
instruction manual that came with the component.
x TRIM Button
This button starts the various trim adjustments. (Page.
22)
When multiple units are connected by F.C.B.S., this button
selects the unit with which to perform trimming.
OPEN/
CLOSE
SOUND
MODE
c EXIT Button
This button ends the trimming mode when trimming is
finished.
PHONO
BALANCED
CD
RECORDER 1
LINE 1
RECORDER 2
TRIM
LINE 2
v TONE Button
EXIT
+
TONE
This button turns tone (bass /treble) control ON and
OFF.
L
R
b ATT Button
ENTER
This button attenuates volume level with one press.(page.
21)
DISPLAY
ATT
-
n Volume Buttons
3 : This button increases the volume level.
VOLUME
4 : This button decreases the volume level.
m DISPLAY Button
This button turns the display ON and OFF.
, Cursor Buttons
RANDOM
SCAN
REPEAT
In the Trimming Mode
TOP MENU
AM/A
RETURN
FM/B
MENU
These buttons are for selecting the channel to trim and
the trimming level.
ENTER : This button selects the trim mode
(LEVEL/BASS/TREBLE).
2 / R : This button selects the R channel for
trimming.
1 / L
3 / + : This button increases the trimming level.
4 / – : This button decreases the trimming level.
: This button selects the L channel for trimming.
Other than the Trimming Mode
2, 1, 3, 4 and ENTER: These buttons are for selecting
settings items on menu displays of Marantz DVD players,
etc.For operations of supported Marantz products, see the
tables on the following page and the instruction manual of
the Marantz component.
. Component Operating Buttons
These buttons are for operating Marantz Super Audio CD
players, DVD players, etc. For operations of supported
Marantz products, see the tables on the following page and
the instruction manual of the Marantz component.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES AND FUNCTIONS OF PARTS
The buttons in groups , and . are for operating Marantz products other than the SC-11S1, such as Super Audio CD players or
DVD players.
The function of each button changes to match the component selected as the input source from the INPUT SELECT buttons z.
¶
Remote Controller Operation for Marantz
Super Audio CD Players
¶
Remote Controller Operation for Marantz DVD
Players
When the CD button is pressed, the buttons in groups ,and
. function as indicated in the table below. These buttons
can be used only when a Marantz Super Audio CD player is
connected to the CD input jacks.
When the LINE 2 button is pressed, the buttons in groups ,
and .function as indicated in the below table.These buttons
can be used only when a Marantz DVD player is connected to
the LINE 2 input jacks.
Button
Function
Open/Closes disc tray.
Button
OPEN/CLOSE
SOUND MODE
3
Function
Open/Closes disc tray.
OPEN/CLOSE
Selects Super Audio CD sound mode.
Selects Super Audio CD/CD.
Changes sound mode.
Play
SOUND MODE
3
Play
Track skip
4
Track skip
(Returns to track beginning/previous track.)
4
(Returns to track beginning/previous track.)
¢
1
¡
8
7
Track skip (Advances to next track.)
Rewind search
Forward search
Pause
¢
1
¡
8
7
Track skip (Advances to next track.)
Rewind search
Forward search
Pause
Stop
Stop
RANDAM
SCAN
REPEAT
Random play
RANDAM
SCAN
REPEAT
Random play
Selects search mode.
Repeat play
AMS (Automatic Music Scan) play
Repeat play
TOP MENU/AM/A Displays top menu.
RETURN/FM/B Returns to previous menu
1 2
TOP MENU/AM/A Not available for use
RETURN/FM/B
1 2
Not available for use
Sets quick replay.
MENU
ENTER
Displays menu screen.
Sets selected item.
MENU
ENTER
Starts quick replay.
Not available for use
Not available for use
Not available for use
Not available for use
3
4
1
/+
/–
Moves cursor upward.
Moves cursor downward.
Moves cursor to left.
Moves cursor to right.
3
4
1
/+
/–
/ L
/ R
/ L
/ R
2
2
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection examples 1~3 are examples of connecting to a
Marantz SM-11S1 stereo power amplifier.
Refer to these connection examples when connecting to
different amplifiers.
BALANCED JACKS
q The BALANCED jacks on this unit are equipped with XLR
connectors that are widely used on professional equipment.
Their features are listed below.
Notes:
• The 3 pin construction enables the musical signal to be
transmitted as a balanced signal, with little effect from
external noise
• Do not connect the power cord of this unit or any of the
other components to the power supply until all of the
connections are completed.
• The detachable locking mechanism minimizes connector
play and enhances connection reliability.
• Insert the plugs of the connections cords firmly into the
connecting jacks. Incorrect insertion may cause noise.
• Connect the wires correctly to the L (left) and R (right)
channels. The red jack is the R (right) channel, and the
white jack is the L (left) channel.
w The XLR connector for professional use is internally wired
in either of the following two systems.
1. USA system (Pin w= COLD, Pin e= HOT)
• Make sure that input and output are connected correctly.
• Refer also to the instruction manuals of components to
connect equipment correctly.
GND
COLD
2
1
3
HOT
2. European system (Pin w= HOT, Pin e= COLD)
GND
2
1
HOT
3
COLD
e This unit uses the 1. USA system.
When a preamp or main amplifier adopting the European
system is connected using a cable with XLR balanced
connectors, the reproduced signal may be inverted of
phase.
In this case, refer to “ANALOG OUTPUT CONNECTOR
PHASE SWITCHING”, and set so that the correct phase
is used.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
7 Connection Example1: Basic Connection for Normal Stereo Playback
Connection Example with Input Source Components
CD Player
Tuner, etc.
DVD Player, etc.
CD-R, etc.
Tape deck, etc.
OPEN/
CLOSE
PLAY
DVD PLAYER DV-12S1
PLAY
STOP
PAUSE
VIDEO ON/OFF
OPEN/CLOSE
DIMMER
RANDOM
D
I
S
P
L
A
Y
O
F
F
D
I
S
P
L
A
Y
O
F
F
STOP
44.1KHz
88.2KHz
176.4KHz
V
-PART
GRP
D
VD
192kHz
PROGRESSIVE
TOTAL VIDEO OFF
LAST MEMO
CONDITION
DOWN MIX
POWER
A
UDIO 96kHz
DIG OFF CHP
TRK
DOLBY
D
TITLE
TEMAIN
LOCK
POWER ON/OFF
SOUND
MODE
L
C
LFE
S
R
STANDBY
F
L
O
F
F
PAUSE
LS
RS
EXT.CLOCK
INV.PHASE
To LINE
OUT jack
To LINE
OUT jack
To LINE
OUT jack
To LINE
OUT jack
To LINE
OUT
jack
To LINE IN
jack
To
LINE
IN
jack
Record player
SC-11S1
PHONO INPUT
L
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
L
L
MODEL NO. SC-11S
R
R
R
IN
OUT
IN
OUT
PUSH
PUSH
PUSH
PUSH
PHONO
GND
R
L
R
L
R
L
I
3
3
2
1
2
1
1
INPUT
2
BALANCED
PRE OUT
R ch
L ch
R ch
CD player, etc.
CD player, etc.
OPEN/
CLOSE
PLAY
OPEN/
CLOSE
PLAY
D
I
S
P
L
A
Y
O
F
F
D
I
S
P
L
A
Y
O
F
F
D
I
S
P
L
A
Y
O
F
F
D
I
S
P
L
A
Y
O
F
F
STOP
44.1KHz
88.2KHz
176.4KHz
STOP
44.1KHz
88.2KHz
176.4KHz
LOCK
POWER ON/OFF
SOUND
MODE
L ch
LOCK
POWER ON/OFF
SOUND
MODE
PAUSE
EXT.CLOCK
INV.PHASE
PAUSE
EXT.CLOCK
INV.PHASE
To BALANCED LINE
OUT jack
To BALANCED LINE
OUT jack
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection example to power amplifier
• Set the PRE OUT button on the front panel to ON.
To power outlet
SC-11S1
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
MODEL NO. SC-11S1
R
R
IN
OUT
IN
OUT
PUSH
PUSH
PUSH
R
L
R
L
R
L
STEREO
BI-AMP
3
3
2
1
2
1
AMP MODE
1
INPUT
2
BALANCED
PRE OUT
Set to
STEREO
Unbalanced connection or balanced connection
Set to
STEREO
Stereo Power
Amplifier SM-11S1
AC IN
UNBALANCED INPUT
AMP MODE
SPEAKER SYSTEMS
R
L
STEREO
BTL
MODEL NO. SM-11S1
To power
outlet
R CH
L CH
BTL
1
BALANCED INPUT
PUSH
PUSH
R
L
3
3
BTL
2
1
2
1
2
1
3
BTL
R CH
L CH
2
R ch
Speaker
L ch
Speaker
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
7 Connection Example 2: Stereo Complete Bi-amp Connection
q The two amplifiers are connected by F.C.B.S.for synchronized use.For F.C.B.S.connection, connect with commercially available
monaural ⇔ monaural miniplugs or stereo ⇔ stereo miniplugs as described in F.C.B.S. (page. 26).
w Set the ID numbers as explained in HOW TO SET ID NUMBERS (page. 27). When the ID1 amplifier is operated, the ID 2
amplifier will operate in sync.
e Connect the analog output of the CD player etc. to the L ch input jacks of both pre-amps.
As both pre-amps operate as monaural pre-amps in BI-AMP mode, do not use the R channel of the input jacks on these units.
¶ About Complete Bi-Amp
Proposed by Marantz, the complete bi-amp connection is an advanced technique that enhances sound quality.The low and mid/high
amplifiers are separated and independent of the preamplifier, therefore interference between low and mid/high sounds is reduced
to a minimum. As a result, a wide sound environment can be reproduced.
Note:
Speaker systems connected using complete bi-amp connections must support bi-amp connections. Before connecting your
speakers, check in the instruction manual that came with the speakers or contact the manufacturer to confirm whether they
support bi-amp connection.
SC-11S1 for L ch
¶Set to ID 1
PHONO INPUT
L
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
MODEL NO. SC-11S1
To power outlet
Set to BI-AMP
R
R
R
IN
OUT
PUSH
IN
OUT
PUSH
PUSH
PUSH
PHONO
GND
R
L
R
L
R
L
STEREO
BI-AMP
IN OUT
3
3
2
1
2
1
F.C.B.S.
AMP MODE
1
INPUT
2
BALANCED
PRE OUT
Miniplug connecting cord × 2
(commercially available)
F.C.B.S.
F.C.B.S.
L ch for SM-11S1
AC IN
UNBALANCED INPUT
AMP MODE
SPEAKER SYSTEMS
R
L
STEREO
BTL
MODEL NO. SM-11S1
To power outlet
R CH
L CH
BTL
1
BALANCED INPUT
PUSH
PUSH
R
L
3
3
BTL
2
1
2
1
BTL
R CH
L CH
2
MF/HF
LF
Remove
shorting bar
Speaker
L ch
Remove
shorting bar
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CD Player
ANALOG OUTPUTS
AC IN
R
UNBALANCED
L
EXT.CLOCK INPUT
DIGITAL OUTPUTS
COAX.
(-)
COLD
(+)
HOT
GND
BALANCED
R
L
MODEL NO. SA-11S2
OPT.
L ch
R ch
To BALANCED
LINE OUT jack
SC-11S1 for R ch
¶Set to ID 2
PHONO INPUT
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
L
MODEL NO. SC-11S1
To power outlet
Set to BI-AMP
R
R
R
IN
OUT
PUSH
IN
OUT
PUSH
PUSH
PUSH
PHONO
GND
R
L
R
L
R
L
STEREO
BI-AMP
IN OUT
3
3
2
1
2
1
F.C.B.S.
AMP MODE
1
INPUT
2
BALANCED
PRE OUT
F.C.B.S.
F.C.B.S.
R ch for SM-11S1
AC IN
UNBALANCED INPUT
AMP MODE
SPEAKER SYSTEMS
R
L
STEREO
BTL
MODEL NO. SM-11S1
To power outlet
R CH
L CH
BTL
1
BALANCED INPUT
PUSH
PUSH
R
L
3
3
BTL
2
1
2
1
BTL
R CH
L CH
2
MF/HF
LF
Remove
shorting bar
Speaker
R ch
Remove
shorting bar
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
7 Connection Example 3: Basic Connection for 5.1 Multi-Channel Playback
q The three units are connected using F.C.B.S. For the F.C.B.S connection, prepare 3 audio connection cables, and refer to
F.C.B.S. on page 26.
w Set the ID numbers for the three amplifiers as explained in HOW TO SET ID NUMBERS (page. 27).
When the ID 1 pre-amp is operated, ID 2 and ID 3 pre-amps will operate in sync.
e Connect the outputs of players that have 5.1 channel analog outputs to each of the three pre-amps.
r If using an active subwoofer, see the instruction manual that came with the subwoofer for further instructions.
For front L/R
¶Set to ID 1
PHONO INPUT
L
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
MODEL NO. SC-11S1
To power outlet
Set to STEREO
R
R
R
IN
OUT
PUSH
IN
OUT
PUSH
PUSH
PUSH
PHONO
GND
R
L
R
L
R
L
STEREO
BI-AMP
IN OUT
3
3
2
1
2
1
F.C.B.S.
AMP MODE
1
INPUT
2
BALANCED
PRE OUT
Miniplug connecting cord x 3
(commercially available)
F.C.B.S.
F.C.B.S.
For front L/R
SM-11S1
Set to STEREO
AC IN
UNBALANCED INPUT
AMP MODE
SPEAKER SYSTEMS
R
L
STEREO
BTL
MODEL NO. SM-11S1
To power outlet
R CH
L CH
BTL
1
BALANCED INPUT
PUSH
PUSH
R
L
3
3
BTL
2
1
2
1
BTL
R CH
L CH
2
Front R ch
Speaker
Front L ch
Speaker
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Super Audio CD Multi-channel Player
MULTI CHANNEL AUDIO OUT
FRONT R
FRONT L
SURROUND R SURROUND L SUB-WOOFER
CENTER
to page. 18
For center/
subwoofer
¶Set to ID 2
PHONO INPUT
L
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
MODEL NO. SC-11S1
To power outlet
Set to STEREO
R
R
R
IN
OUT
PUSH
IN
OUT
PUSH
PUSH
PUSH
PHONO
GND
R
L
R
L
R
L
STEREO
IN OUT
BI-AMP
3
3
2
1
2
1
F.C.B.S.
AMP MODE
1
INPUT
2
BALANCED
PRE OUT
to page. 18
For center
SM-11S1
Set to STEREO
AC IN
UNBALANCED INPUT
AMP MODE
SPEAKER SYSTEMS
R
L
STEREO
BTL
MODEL NO. SM-11S1
To power outlet
R CH
L CH
BTL
1
BALANCED INPUT
PUSH
PUSH
R
L
3
3
BTL
2
1
2
1
BTL
R CH
L CH
2
To line input
jack
Center speaker
Amplifier built-in
subwoofer
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
From page. 17
For surround L/R
¶Set to ID 3
PHONO INPUT
CD
1
-
LINE
-
2
1
-
RECORDER
-
2
PRE OUT
AC IN
L
L
L
MODEL NO. SC-11S1
To power outlet
Set to STEREO
R
R
R
IN
OUT
PUSH
IN
OUT
PUSH
PUSH
PUSH
PHONO
GND
R
L
R
L
R
L
STEREO
BI-AMP
IN OUT
3
3
2
1
2
1
F.C.B.S.
AMP MODE
1
INPUT
2
BALANCED
PRE OUT
From page. 17
F.C.B.S.
F.C.B.S.
For surround L/R
SM-11S1
Set to STEREO
AC IN
UNBALANCED INPUT
AMP MODE
SPEAKER SYSTEMS
R
L
STEREO
BTL
To power outlet
MODEL NO. SM-11S1
R CH
L CH
BTL
1
BALANCED INPUT
PUSH
PUSH
R
L
3
3
BTL
2
1
2
1
BTL
R CH
L CH
2
Surround R ch
Speaker
Surround L ch
Speaker
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
SPEAKER POSITIONING FOR SUPER
AUDIO MULTI-CHANNEL SOUND
CONNECTING THE POWER SUPPLY
1. Plug the power cable into AC IN jack on the back panel.
In order to enjoy Super Audio CD multi-channel sound with
the best possible acoustics, it is recommended to position
speakers as specified in ITU-R BS.775-1 of the International
Telecommunication Union (ITU).Super Audio CD multi-channel
discs are recorded and mixed so as to achieve the optimum
effect with a speaker system laid out as specified in ITU-R
BS.775-1.
• With Super Audio CD multi-channel discs, the music signals
are basically recorded using 5 channels (3 - 6 channels
sometimes), but in some cases, LFE (for subwoofer) is
recorded as a sixth channel. Each disc indicates how many
channels have been recorded on it.
• The basic layout is 3 speakers in the front and 2 in the back
since multi-channel discs usually have 5 channels. The 2
front, 1 center and 2 surround (rear) speakers should be set
in a circle around the listening point as shown below.If using
speakers of differing sizes, adjust volume balance from the
amplifier.
2. Turn on the power switch of the audio unit (amplifier, etc.)
that is connected with this unit. Set the selector on the
connected unit to this unit.
3. Plug the power cable into an AC outlet.
• The location of the subwoofer in the figure is just for
explanatory purposes. It can be located anywhere in the
room. For connection and positioning instructions, see the
instruction manual that came with the subwoofer.
¶
ITU (International Telecommunication Union)
The ITU is a special organization of the United Nations. It
consists of a number of organs, one of which is the Radio
Broadcasting Section.
ITU-R BS in the recommendation which consists of standards
relating to broadcasting (audio) operations, one of which is the
ITU-R BS.775-1 which governs “multi-channel stereo sound
systems.”
Center
speaker
Sub-woofer
Front speaker
(Left)
Front speaker
(Right)
60°
approx. 110°
approx. 110°
Reference listening
position
Rear speaker
(Left Surround)
Rear speaker
(Right Surround)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
o
t
y
PLAYBACK
To explain how to play back input sources, typical examples
are given with disc playback from a Super Audio CD player
and record playback from an analog record player.
Refer to the connection procedures and check that each
component is correctly connected to the amplifier.
DISPLAY
ATT.
PHONO
MC
TONE
OPERATE
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
7 Disc Playback on a Super Audio CD
!
q
r
Player
1. Press the power ON/OFF switch of the Super Audio CD
OPEN/
CLOSE
SOUND
MODE
player to activate power to it.
2. Press the power ON/OFF switch qon the unit to activate
power to it. When using multiple amplifiers connected by
F.C.B.S., turn the power ON in the order of lowest to highest
ID number.
PHONO
BALANCED
CD
RECORDER
1
LINE
1
RECORDER
TRIM
2
LINE
2
EXIT
+
TONE
3. Select the input source from the INPUT SELECTOR knob
! on the unit, or the INPUT SELECT buttons z of the
remote controller.
L
R
ENTER
4. Press the PRE OUT t button to switch output from the
unit ON.
DISPLAY
ATT
5. Turn on the power to the connected power amp.
-
6. Load a disc into the Super Audio CD player and press the
PLAY button to start playback.
VOLUME
7. Adjust the volume level using the VOLUME knob r on
the unit or the VOLUME 3/4 buttons n on the remote
controller.
8. You can turn the display and side illumination ON/OFF as
suited for the room environment.Press the DISPLAY button
o on the unit or the DISPLAY button m on the remote
controller.
RANDOM
SCAN
REPEAT
MENU
TOP MENU
AM/A
RETURN
FM/B
7 Disc Playback on an Analog Record
Player
1. Press the power ON/OFF qswitch of the unit to activate
power to it. When using multiple amplifiers connected by
F.C.B.S., turn the power ON in the order of lowest to highest
ID number.
2. Select the PHONO using the INPUT SELECTOR knob
r on the unit, or the INPUT SELECT buttons z of the
remote controller. To prevent unexpected accidents, it is
recommended to set the volume level to -∞ (mute) by
turning the VOLUME knob r.
3. Set the PHONO MC button yto MM or MC according to
the cartridge you are using.
4. Press the PRE OUT t button to switch output from the
unit ON.
5. Turn on the power to the connected power amp.
6. Set a record on the analog record player and play it.
7. Adjust the volume level using the VOLUME knob r on
the unit or the VOLUME 3/4 buttons n on the remote
controller.
8. You can turn the display and side illumination ON/OFF as
suited for the room environment.Press the DISPLAY button
o on the unit or the DISPLAY button m on the remote
controller.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
ATT. (ATTENUATION)
SUBSONIC FILTER
ATT. button
TONE button
DISPLAY
ATT.
DISPLAY
ATT.
PHONO
MC
TONE
OPERATE
PHONO
MC
TONE
OPERATE
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
If a warped analog record or disc recorded with super-low bass
is played, the speaker diaphragm may vibrate unusually and
the disc may not be played correctly.
In such cases, the subsonic filter can be set to block the
super-low bass output component. Press the TONE button for
2 seconds or more to set the subsonic filter ON/OFF.
When the subsonic filter is switched from ON to OFF, the ON/
OFF condition of the subsonic filter is displayed for 3 seconds,
as shown below.
ATT is a one-touch feature for reducing the volume level.When
the ATT button on either the unit or remote controller is pressed,
the volume level is attenuated.
1. When the ATT button on either the unit or the remote
controller is pressed, “ATT” flashes on the display and the
volume level is reduced.
When the ATT button is pressed again or the volume
is increased/decreased using the controls, the mode is
canceled and the original volume level is restored.
After displaying the ON/OFF condition, the display returns to
the volume display.
Display before
pressing the
TONE button
2. When the ATT button is pressed with the volume level at
-∞(muted), the display will change as it is shown below
appears for about 3 seconds, and attenuation is not
applied.
Press the TONE
button for 2
seconds or longer
Display after 3
seconds have
passed
7 How to Set Attenuation Level
Set to ON
Set to OFF
Attenuation level can only be set using the ATT button on the
unit. The attenuation level can be set at –20dB, -40dB, or -∞.
The factory default setting is -20dB.
1. Press and hold the ATT button on the unit for 2 seconds or
longer. The attenuation level will appear on the display.
2. The attenuation level setting value changes with each press
of the ATT button on the unit.
3. When the desired attenuation level setting appears on the
display, leave it unchanged for 2 seconds or longer to enter
the setting.Once entered, the display returns to the volume
level indication.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
7 How to Trim Volume Level
TRIMMING
The volume level of the left and right channels can be trimmed
in 0.5dB steps across a 0.0 – 9.0dB range. When the unit
is shipped from the factory, the volume level is set to 0.0dB
(maximum).
There are three trimming modes.
• LEVEL trimming that adjusts the volume level on left and
right channels
• BASS trimming that adjusts the bass on left and right
channels
1. Press theTRIM button once to access the LEVEL trimming
• TREBLE trimming that adjusts the treble on left and right
channels
mode.
Note:
Trimming is performed from the remote controller.
2. The flashing “0.0” on the left indicates that trimming is
activated for the left channel volume level.Press the 3 and
4 buttons to set the volume level of the left channel.
TRIM : This button starts trimming.When multiple SC-11S1s
are connected, this button selects the amplifier with
which to perform trimming. In such case, trimming
is performed in the order of the lowest to highest ID
number.
EXIT : This button ends trimming.
3. Press the 2 button to set the right channel volume level.
When the right side “0.0” starts flashing, trimming is
activated for the right channel volume level.Press the 3 and
4 buttons to set the volume level of the right channel.
3 : This button increases the trimming level.
4 : This button decreases the trimming level.
2 : This button selects the R channel for trimming.
1 : This button selects the L channel for trimming.
ENTER : This button selects the trim mode (LEVEL, BASS
or TREBLE).
OPEN/
SOUND
MODE
4. To trim the volume level of the ID 2 (slave) unit, press the
TRIM button again and set the volume level as in steps
1~3. After that, pressing the TRIM button again allows you
to trim the volume level for the “ID 3” unit and so forth.
CLOSE
PHONO
BALANCED
CD
RECORDER
1
LINE
1
RECORDER
TRIM
2
LINE
2
5. When finished with volume level trimming, press the EXIT
EXIT
+
TONE
button.
TRIM
EXIT
L
R
ENTER
3, 4, 2, 1
DISPLAY
ATT
-
VOLUME
RANDOM
SCAN
REPEAT
MENU
TOP MENU
AM/A
RETURN
FM/B
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
7How to Trim Bass
7How to Trim Treble
The bass level of the left and right channels can be trimmed
in 2dB steps across a –8.0 – +8.0dB range. When this unit is
shipped from the factory, the bass level is set to 0 dB. To trim
the bass level, active tone control by pressing theTONE button
on either the unit or the remote controller.
The treble level of the left and right channels can be trimmed
in 2dB steps across a –8.0 – +8.0dB range. When this unit is
shipped from the factory, the bass level is set to 0 dB. To trim
the treble level, active tone control by pressing theTONE button
on either the unit or the remote controller.
1. Press theTRIM button once to access the LEVEL trimming
1. Press theTRIM button once to access the LEVEL trimming
mode.
mode.
2. Press the ENTER button once to access the BASS trimming
2. Press the ENTER button twice to access the TREBLE
mode.
trimming mode.
3. The flashing “0” on the left indicates that trimming is
activated for the left channel bass level. Press the 3 and
4 buttons to set the bass level of the left channel.
3. The flashing “0” on the left indicates that trimming is
activated for the left channel treble level. Press the 3 and
4 buttons to set the treble level of the left channel.
4. Press the 2 button to start the “0” on the right side flashing.
When the right side “0”starts flashing, trimming is activated
for the right channel bass level. Press the 3 and 4 buttons
to set the bass level of the right channel.
4. Press the 2 button to start the “0” on the right side flashing.
When the right side “0”starts flashing, trimming is activated
for the right channel treble level.Press the 3 and 4 buttons
to set the treble level of the right channel.
5. To trim the bass level of the ID 2 (slave) unit, press the
TRIM button again and set the bass level as in steps 2-4.
After that, pressing the TRIM button again allows you to
trim the bass level for the “ID 3” unit and so forth.
5. To trim the treble level of the ID 2 (slave) unit, press the
TRIM button again and set the treble level as in steps 2-4.
After that, pressing the TRIM button again allows you to
trim the treble level for the “ID 3” unit and so forth.
6. When finished with bass level trimming, press the EXIT
6. When finished with treble level trimming, press the EXIT
button.
button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
HOW TO OPERATE THE SIDE
ILLUMINATION
BI-AMP MODE
This unit is equipped with a bi-amp mode to enable a complete
bi-amp connection using two SC-11S1s. This complete bi-
amp connection is a high-end technique for enhancing sound
quality, proposed by Marantz. Using this system, the bi-amp
supporting speaker system is separated from the preamplifiers
that separately drive the low and high speakers. (For more
information, see Connection Example 2 (page.14).)
Illumination Lamp
DISPLAY button
DISPLAY
ATT.
PHONO
MC
TONE
OPERATE
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
The illumination lamp has an always-ON mode (factory setting)
and an always-OFF mode.
In the always-ON mode, the illumination lamp turns ON/OFF
in sync with the display.
The bi-amp mode is engaged by setting the operating mode
switch on the rear panel to “BI-AMP”. In the bi-amp mode, the
signals input to the L channel are split by the input selector and
sent to the left and right volume amplifiers, and are then output
to the PRE OUT terminals. The figures below show example
displays in the stereo and bi-amp modes.
1. With the illumination lamp lit, press and hold the DISPLAY
button for 3 seconds or longer.The illumination lamp goes
out, and the always-OFF mode is engaged.
Stereo mode
Bi-amp mode
2. To cancel the always-OFF mode and turn the illumination
lamp ON, press and hold the DISPLAY button for 3 seconds
or longer.
Notes:
• When in bi-amp mode, the R channel input jacks cannot
be used.
• When in bi-amp mode, the signals input into the L channel
are output from both channels. Therefore, the same
signals are output from the L channel and R channel in
RECORDER OUT, PRE OUT, PHONES OUT.
• Always turn the power to the unit OFF before changing
the operating mode switch setting. Turning the power ON
again activates the new setting.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
REMOTE POWER CONTROL
2. After completing the connections shown below, switch the
remote power control ON/OFF switch on the rear panel of
the SM-11S1 to ON.
By connecting this unit to a Marantz SM-11S1 stereo power
amplifier by remote power control, the power supply of the
SM-11S1 can be automatically switched ON/OFF in sync with
this unit’s power ON/OFF control. There are 2 trigger output
terminals on this unit, and a maximum of 2 SM-11S1s can be
controlled in sync with this unit’s power ON/OFF control.
3. Press the SM-11S1 POWER ON/OFF switch to switch to
standby mode.
4. In this condition, press the POWER ON/OFF switch on
this unit, and the power of the SM-11S1 will switch ON in
sync.
Notes:
1. Prepare the correct number of double-ended mini plug
audio connection cables for the number of SM-11S1s to
be connected. Either of the following types of connection
cables are adequate.
• The SM-11S1 cannot be controlled if the SM-11S1
remote power control switch is OFF.
• When the power for this unit is switched ON or OFF,
control sync signals are output from TRIGGER OUT 1
and 2.
¶
Monaural miniplug ⇔ monaural miniplug connecting
cable
(However, the TRIGGER OUT 2 power ON control
signal is output approximately 1 second after the
TRIGGER OUT 1 power On control signal output.) )
¶
Stereo miniplug ⇔ stereo miniplug connecting cable
Note:
Do not use connecting cables that contain resistance.
SC-11S1
AC IN
TRIGGER OUT
1
2
TRIGGER OUT
1
2
REMOTE POWER CONTROL
REMOTE POWER CONTROL
SM-11S1
AC IN
REMOTE POWER CONTROL
ON
OFF
REMOTE POWER CONTROL
ON
OFF
TRIGGER IN
TRIGGER IN
Set to ON
SM-11S1
AC IN
REMOTE POWER CONTROL
ON
OFF
REMOTE POWER CONTROL
ON
OFF
TRIGGER IN
TRIGGER IN
Set to ON
25
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
F.C.B.S.
The figure below shows an example of four SC-11S1s
connected by F.C.B.S. The top unit is the master unit with ID
1 and controls the three slave units with ID 2~4. When the
master unit is operated, the input source, volume level, ATT
feature, display and tone control ON/OFF feature of the slave
units are operated in sync with the master unit.
F.C.B.S. (Floating Control Bus System) is a communication
system that connects up to four SC-11S1s over a dedicated
bus line so as to enable synchronized operations amongst
them via 2-way data communications.
Prepare the correct number of portable audio connection
cables for the number of units to be connected. Either of the
following types of connection cables are adequate.
This function can be applied to various usages such as
complete bi-amp with 2 SC-11S1s (page.14), and 5.1ch multi-
channel with 3 SC-11S1s (page. 16).
¶
Monaural miniplug ⇔ monaural miniplug connecting
cable
Note:
The SC-11S1 F.C.B.S. function is only valid between the
same SC-11S1 models. This function may not operate
correctly if other Marantz models (PM-11S1, PM-15S1 etc)
are connected.
¶
Stereo miniplug ⇔ stereo miniplug connecting cable
Note:
Do not use connecting cables that contain resistance.
To turn the power of multiple F.C.B.S.-connected units ON/OFF, switch the power ON in order of lowest to highest ID
number, and switch the power OFF in order of highest to lowest ID number.
SC-11S1
OUT
ID 1 Master
IN OUT
IN
F.C.B.S
F.C.B.S.
SC-11S1
OUT
ID 2 Slave
IN OUT
IN
F.C.B.S.
F.C.B.S.
SC-11S1
OUT
ID 3 Slave
IN OUT
IN
F.C.B.S.
F.C.B.S.
SC-11S1
OUT
ID 4 Slave
IN OUT
IN
F.C.B.S.
F.C.B.S.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE AND SET FEATURES
HOW TO SET ID NUMBERS
DISPLAY button
If using this unit by itself as a stereo amplifier, set the ID number
to “0” (Default setting is “0”).
DISPLAY
ATT.
PHONO
MC
TONE
OPERATE
Note:
POWER ON/OFF
PHONES
PHONES
OUT
INPUT SELECTOR
PRE OUT
VOLUME
If the ID number is set to a number other than “0”, this unit
cannot be used for standalone operation.
INPUT SELECTOR
Knob
POWER ON/OFF Switch
The ID number of the unit appears on the display for about 3
seconds after the power is activated.
Set ID numbers as follows.
1. While pressing and holding the DISPLAY button, press the
POWER ON/OFF switch.
When multiple SC-11S1s are connected, a unique ID number
must be set of each one in order to distinguish between
them.
The unit that centrally controls the other units takes ID 1.
The unit with ID1 is called the “Master”. The other units that
synchronize with the master are called “slaves” and take IDs
“2” ~ “4”.
2. Turn the INPUT SELECTOR knob to the desired ID
number.
After finishing setting the ID number, turn power to the unit
OFF.
The setting is stored in memory and becomes active the next
time power to the unit is switched ON.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you experience trouble with the SC-11S1, make the below
checks before thinking the worst. Improper operation can
cause the SC-11S1 to behave in a way that makes you think
something is wrong with the equipment when actually not. If
the trouble cannot be fixed after making the below checks,
contact the place of purchase, your nearest Marantz dealer,
our customer service center or our repair service center.
7 Protective Circuits
The unit is equipped with protective circuits to protect the
amplifier circuits and headphones against damage. If a
protective circuit trips, the sound is instantly muted. In this
case, “PROTECT” flashes on the display and the OPERATE
indicator also flashes.To release the protective circuits, switch
the power OFF, and wait for approximately 1 minute before
switching the power back ON again.
¶ Power does not turn ON
Is the power cable securely plugged into a power outlet?
¶ At Power ON
For about 8 seconds after the power is switched ON, a
protective circuit trips and mutes the sound to give amplifier
circuits time to stabilize. Once the amplifier circuits stabilize,
the protective circuit releases and audio is enabled.
¶ Nothing is heard from the headphones or
speakers
1. Is the PRE OUT button on the front panel OFF?
2. Is the PHONES OUT button on the front panel OFF?
3. Is the ATT (attenuation) feature active?
¶ If Strong Bass Signals Are Input
A protective circuit trips if bass signals of an excessive level
are detected. A protective circuit also trips if an abnormality
caused by such reasons as an amplifier fault is detected in the
power supply circuit.
4. Is the input source selected with the INPUT SELECTOR
on the front panel correct?
5. Are you using the player (replaying device) correctly?
6. Are connection cables and speaker cables securely
connected?
7 Error Messages
7. Volume may have been muted by a protective circuit that
tripped. Try adjusted the volume again.
When multiple SC-11S1s are connected by F.C.B.S., the
below error messages may appear on the display. In these
cases, there is a problem with the ID number setting or remote
cable connection. Check the ID numbers and remote cable
as indicated in the below table. For details on how to set ID
numbers, see HOW TO SET ID NUMBERS on pg. 27.
8. If an error message is displayed, correctly set the ID number
as indicated in the reference table.
¶ Volume differs between left and right
Error
message
Are the volume (LEVEL TRIM), bass, or treble levels trimmed
differently for the right and left sides? If required, try trimming
again.
Meaning
What to do
ID 2 is used with
more than one amp.
1
2
3
ERROR 02
ID 3 is used with
more than one amp. for each amp.
Set separate ID numbers
ERROR 03
ERROR 04
¶ Sound is not stereo
The MODE switch on the rear panel may be set to “BI-AMP”.
If the unit is in bi-amp mode, shut the power OFF, set the
MODE switch to “STEREO” and then reactivate the power.
Power must be activated after the MODE switch is set for the
setting to be active.
ID 4 is used with
more than one amp.
Amps of IDs
2 - 4 cannot
If power to ID 1 amp is
OFF, activate power. Check
remote cable is properly
connected.
communicate with
ID 1 amp.
4
5
ERROR 11
¶ Record player audio is not heard or contains
If ID 1 is used for more
than one amp, properly
set ID numbers. Check
remote cable is properly
connected.
a lot of noise
ID 1 amp cannot
ERROR 12 communicate with
amps of IDs 2 - 4.
1. Is the PHONO MC button on the front panel set to match
the type of cartridge you are using?
2. Are the connection cables securely connected?
3. Is the grounding wire from the record player connected to
the PHONO GND terminal?
4. Is the cartridge properly connected to the tone arm?
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS & DIMENSIONAL DRAWINGS
Power output (20Hz – 20kHz)
¶ Dimensions (Unit: mm (inch))
......................................................2.0V (BALANCED)
................................................ 2.0V (UNBALANCED)
Maximum output (20Hz – 20kHz)
....................................................13.5V (BALANCED)
.............................................. 13.5V (UNBALANCED)
Total frequency distortion (20Hz – 20kHz)
.................................................0.002% (BALANCED)
............................................0.003% (UNBALANCED)
Frequency response ( 3dB)
...................................... 5Hz – 120kHz (BALANCED)
................................ 5Hz – 120kHz (UNBALANCED)
Input sensitivity/Input impedance
PHONO (MC)..............................................280µV / 100Ω
PHONO (MM) .............................................2.9mV / 47kΩ
BALANCED ...............................................250mV / 20kΩ
CD/LINE/RECORDER...............................250mV / 20kΩ
S/N rate (IHF A network, 0.5V output)
PHONO (MC).....................................78dB (0.5mV input)
440 (17-3/8)
PHONO (MM) .......................................89dB (5mV input)
BALANCED ......................................98dB (500mV input)
CD/LINE/RECORDER......................99dB (500mV input)
Tone control
BASS (50Hz) ........................................................ 8.0dB
TREBLE (20kHz) .................................................. 8.0dB
Maximum allowed PHONO input (1kHz)
MC .......................................................................... 15mV
Specifications subject to change without prior notice.
MM........................................................................ 150mV
Headphone maximum output (20Hz – 20kHz)
..................................... 200mW + 200mW (32Ω load)
................................... 400mW + 400mW (600Ω load)
Headphone total frequency distortion (20Hz – 20kHz)
........................................................................0.015%
Headphone frequency response ( 3dB) ......... 5Hz – 100kHz
Power requirement
...............................................AC 120V 60Hz (U.S.A.)
........................................ AC 230V 50/60Hz (Europe)
Power consumption ....................35W (EN60065) (UL60065)
Maximum outer dimensions
Width.................................................440mm (17-3/8 ins.)
Height .......................................................127mm (5 ins.)
Depth ......................................................431mm (17 ins.)
Weight .........................................................16.0kg (35.3 lbs)
Accessories
Remote controller ...........................................................1
Size “AAA” batteries........................................................2
AC Power cord................................................................1
User Guide......................................................................1
Warranty Card (U.S.A.)...................................................1
Warranty Card (Canada).................................................1
29
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
The section describes the care and maintenance tasks that
must be performed to optimize the operation of your Marantz
equipment.
7 Repairs
Only the most competent and qualified service technicians
should be allowed to service the factory-trained warranty
station personnel have the knowledge and special facilities
needed for repair and calibration of this precision equipment.
After the warranty period has expired, repairs will be performed
for a charge if the equipment can be returned to normal
operation.
7
Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with
proper care and cleaning, Never use scouring pads, steel
wool, scourging powders or harsh chemical agents (e.g., lye
solution), alcohol, thinner, benzine, insecticide or other volatile
substances as these will mar the finish of the equipment.
Likewise, never use cloths containing chemical substances.
If the equipment get dirty, wipe the external surfaces with a
soft, lint-free cloth.
In the event of difficulty, refer to your dealer or write directly
to the nearest location to you that is listed on the Marantz
Authorized Service Station list. If writing, please include the
model and serial number of the equipment together with a full
description of what you think is abnormal about the equipment’s
behaviour.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in a ratio of one part
detergent to six parts water.
• dip a soft, lint free in the solution and wring the it is damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry cloth.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Japan
09/2007 00M22AJ851310 mzh-g
Download from Www.Somanuals.com. All Manuals Search And Download.
|