Model RX9001 User Guide
Serial Extender
ENGLISH
FRANÇAIS
ESPAÑOL
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 U
s
e
r
G
u
i
d
e
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001User Guide
Contents
Before You Start
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
Unpacking the Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Extender
Mounting the Extender in a Rack
Connecting the Extender to External Equipment
Attaching the Extender to Infrared Controlled A/V equipment
Using the Sensor Inputs
Connecting to Relay-controlled Equipment
Connecting to Serial Equipment
Connecting to a Lutron RadioRa Lighting System
Inserting a Multimedia Server in the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the Extender to the Network
Using the Extender
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
5
5
6
7
7
8
9
9
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring the Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
12
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What Do the LEDs Indicate?
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding the Exact Location of an A/V component’s IR Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operating A/V components with the Extender
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
Resetting the Extender
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Firmware Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
IFU Approbation / Safety Content RX9001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
i
i
FCC Compliancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Before You Start
The Serial Extender is an important element of the
RC9001 System and makes it possible to
control A/V equipment via RF in the entire house. In addition, it can be connected to A/V equipment
via RS232 and allows you to use power sensing for reliable power on/off switching. You can also
use it to control drapes and projector lifts, for example.
In order to use the Extender in a Wireless
Network:
• Install the Extender: connect it to a router and external equipment, like a TV or receiver.
• Configure the Extender: connect it to the PC and use the Configuration Tool.
The Extender is used in a network with a Wireless Access Point and/or a router, as illustrated
below.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Unpacking the Extender
Serial Extender
Front Panel
4 groups of 4 LEDs each for the
• IR ports;
• Serial (RS232) ports;
• Sensor inputs;
Power LED
Ethernet LED
Busy LED
• Relay outputs.
Back Panel
4 RS232 ports –
4 dipswitches for
the IR outputs
Extender ID
switch
Configuration
switch
3 DB9 connectors and
one 3-pin connector
Power input
4 IR ports
Grounding
5V DC output
4 Relay outputs
4 Power sense inputs
Ethernet input (RJ45)
IP address
3
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
2 Mini-jack IR Cables
Power Adapter
Configuration Cable
2 Dual IR Emitters
Crossed Ethernet cable
Mounting Kit
x 2
x 6
x 4
x 4
x 4
Installing the Extender
Mounting the Extender in a Rack
Warning
Keep the Extender away from heat sources such as amplifiers.
Fit the mounting plate
on the Extender with
the screws.
Attach the Extender
to a rack, using the
screws, washers and
nuts.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Connecting the Extender to External Equipment
The Extender can be connected to external equipment through the various outputs on the back
panel.
Warning
Make sure that the equipment is always turned off before connecting it to the Extender.
Attaching the Extender to Infrared Controlled A/V equipment
For the Extender to transmit an IR signal, you need to connect it to the A/V component via the IR
Output on the back of the Extender. In contrast to previous Marantz Extenders, the RX9001 has no IR
blaster.
To connect the Extender to infrared controlled A/V equipment, use one of the following cables
enclosed with the Extender:
• a Dual IR emitter;
-or-
• a mini-jack IR cable.
Insert the mini-jack in the Extender
and attach an emitter to the infrared
display of the infrared controlled
device.
Insert one mini-jack in the
Extender and the other in the
infrared controlled device.
Adjusting the Power Level of the IR Outputs
At the back of the Extender there are 4 dipswitches, one for each IR output. Use these dipswitches
to reduce the power level of the Dual IR emitters and the mini-jack cables.
This is useful when you suspect that the IR signal is too strong for the receiving A/V component, or
when you connect the IR port to an external IR-bus system.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Using the Sensor Inputs
When the Control Panel sends out a macro to switch multiple A/V components on or off, discrete
codes are normally used to ensure the state of the component. In some cases, only toggle codes are
available: one command toggles between the on and off state, and there is no separate command
for switching the component on and switching it off. In this event, the system may get out of sync.
This problem can be solved by using power sensing:
• A power sensor connected to an A/V component can detect whether it is switched on or off.
By connecting the power sensor to the Extender, this information is subsequently transmitted to
the Extender.
• Some A/V components, such as receivers, have mini-jack outputs specifically for this purpose.
These mini-jack outputs can be connected to the power sense inputs on the Extender.
• For video sources, video sensor modules can be used.
Make sure that you create the specific power sensing commands in the action list of
Wizz.it Ex.
Note
Sensor modules are not delivered with the Extender, but most available modules are
compatible with the Extender. The power sense inputs are triggered by a voltage input
between 5V and 30V.
Use standard wiring and
Phoenix connectors.
Use this wiring
solution if the
sensor module’s
output provides a
voltage level.
Use this wiring
solution if the
sensor module is
powered by the
Extender (the output
is a relay).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Connecting to Relay-controlled Equipment
Use standard wiring and Phoenix
connectors.
Connecting to Serial Equipment
There are two ways to connect serial equipment to the Extender:
Use a serial cable.
Note
For most A/V components a standard female to male or female RS232 cable can be used.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Use standard wiring and Phoenix
connectors.
A/V component
Extender
Tip
In case you experience communication
problems when using the RS232 wiring
solution illustrated above, make sure
that the GND pin on the Extender is
grounded correctly on the side of the
A/V component.
Connecting to a Lutron RadioRa Lighting System
1
Connect the Lutron Lighting System to the Extender via the RS232 port. Refer to
chapter ‘Connecting to Serial Equipment’ on page 7.
2
Open Wizz.it Ex.
3
4
Open the configuration file.
Insert the Lutron Lighting System in the configuration file.
Note
If there are multiple Extenders, add these Extenders to the configuration file via the
System properties before configuring the Lutron Lighting System.
5
6
Open the Lutron Lighting System Properties.
Adjust the settings of the Lutron Lighting System:
1
2
Select the Extender to which the Lutron Lighting System is connected.
Select the port on the Extender to which it is connected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Inserting a Multimedia Server in the Network
You can add an Escient Media Server or an Imerge Sound Server to your network.
1
2
3
4
Connect the Server to the router.
Open Wizz.it Ex.
Open the configuration file.
To insert a Multimedia Server in the configuration file, click the ‘Insert Escient Media
Server’ button or the ‘Insert Imerge Sound Server’ button.
5
6
Open the Multimedia Server Properties.
Adjust the settings of the Multimedia Server:
• If the Multimedia Server has a fixed IP-address, fill in that IP-address.
• If it has a dynamic IP-address, fill in its host name.
Connecting the Extender to the Network
The Extender is normally ready for use and does not need to be configured. The settings need only
be adjusted in case you wish to operate the Extender with a fixed IP-address, or if there is more
than one Extender in the Wireless
Network.
Note
Before you start using or configuring the Extender, check if any firmware updates are available
your region.
Refer to the chapter ‘Firmware Update’ on page 13 for further details.
Using the Extender
1
Connect the Extender to the router with a straight Ethernet cable.
Extender
Straight
Ethernet cable
Router
2
3
Set the Extender ID switch to 1 or to an ID that is not yet used by another Extender in
the Wireless
Network.
Set the Configuration switch to 1 for use:
Configuration switch: 1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
4
Plug in the Extender’s power adapter.
The Extender will start up. After startup, the Power and Ethernet LEDs are green. The Busy LED
blinks green when it’s processing a code or a macro.
Configuring the Extender
You can connect the Extender directly to the PC for configuration.
If the Extender is already installed and connected to external equipment, it is also possible to
configure it through a router. For further instructions, refer to the topic ‘Configuration through a
router’ on page 11.
Tip
To ensure optimal performance, use a dedicated network for all wireless
communication. This makes the Wireless
changes in network settings.
Network independent of other networks and
Configuration with a direct connection to the PC
1
Connect the Extender to the PC with the configuration cable (this is the crossed
Ethernet cable enclosed).
Crossed
Ethernet cable
Extender
2
3
Make sure that the PC is switched to DHCP while the Extender is in configuration
(normally, this should already be the case).
Set the Configuration switch to 2 for configuration:
Configuration switch: 2
The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy
LED is red/green blinking.
4
5
Open the browser.
Type the IP address of the Extender in the address bar of the browser: 192.168.8.80.
(This is also printed on the back of the Extender.)
You may have to refresh the browser before the Configuration Tool appears.
6
7
Make sure you have the IP address and netmask at hand, and follow the onscreen
instructions.
When the configuration is completed, disconnect the Extender from the computer and
reconnect it to the router with a straight Ethernet cable. Set the Configuration switch
to 1 for use.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Configuration through a router
1
The Extender is already connected to the router. Connect the router to the PC as well.
Straight
Ethernet cable
Extender
Router
2
Set the Configuration switch to 3 for configuration:
Configuration switch: 3
The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy
LED is red/green blinking.
3
4
Open Wizz.it Ex on the PC.
In the Tools menu, select Extender Discovery.
The Extender Discovery tool appears, with a list of all the detected Extenders in the Wireless
Network.
5
6
7
Select the Extender that you want to configure and click on the Configure button.
The Configuration Tool opens in the browser.
Make sure you have the IP address and netmask at hand, and follow the onscreen
instructions.
When the configuration is completed, disconnect the Extender from the computer and
reconnect it to the router with a straight Ethernet cable. Set the Configuration switch
to 1 for use.
Tip
When the Extender is not recognized by the Extender Discovery tool, configure the Extender
directly with the configuration cable, as described on page 10.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Support
Troubleshooting
What Do the LEDs Indicate?
LEDs
Ethernet LED
Busy
Colors
The Extender is busy processing a code or short
macro from a Control Panel.
Green blinking
The Extender’s IP address is being determined.
The Extender is busy processing a long macro
from a Control Panel.
Green
The Extender is functioning normally.
Red/green blinking
Red
The Extender is in configuration.
Refer to the topic ‘There is an IP conflict’ on
page 12.
Refer to the topic ‘There are duplicate Extender
IDs’ on page 13.
Refer to the Refer to the topic ‘The IP address
cannot be determined’ on page 12.
The Extender is starting up. Wait until startup has
finished.
Red blinking
There is an IP conflict
There is another A/V component in the network that is using the same fixed IP address as the
Extender. Change the IP address of the Extender in the Configuration Tool.
If the problem persists, check the router settings.
The IP address cannot be determined
• When using the Extender: make sure that the Extender is connected to the router with a straight
Ethernet cable.
• When configuring the Extender: make sure the PC is not using a fixed IP address but is using
DHCP instead.
• Make sure the router is switched on. If the router is using DHCP, the Extender’s IP address cannot
be determined. Make sure to use the correct network settings on the router.
Finding the Exact Location of an A/V component’s IR Receiver
1
Remove the protective tape of the Dual IR emitters.
2
Set the Dual IR emitters to the minimal power level, and hold the adhesive side of one
of the emitters 0.4 - 0.8 inch / 1 - 2 cm in front of the A/V component.
3
4
Make sure the Control Panel is configured to operate correctly within the
RC9001 system (e.g.: configured for WiFi, not for IR).
Move the emitter across the front panel of the A/V component, and at the same time,
send commands with the Control Panel to the A/V component.
Take note of when the A/V component reacts to the IR signals of the emitter.
5
When the A/V component reacts, position the emitter in that place.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Operating A/V components with the Extender
The A/V components do not respond to commands from the Extender
• Check if the Busy LED blinks green when you send a command with the Control Panel. If the Busy
LED does not blink, the Extender is not receiving commands from a Control Panel.
• Make sure that the Control Panel is configured correctly in Wizz.it Ex;
• Make sure that the Extender is configured correctly in the Configuration Tool and connected
properly to the A/V components;
• Make sure that the switches on the Extender are set correctly.
There are duplicate Extender IDs
Using the Extender ID switch, assign a unique ID to each Extender in the same Wireless
Network. Make sure the Control Panel is configured accordingly in Wizz.it Ex.
You can use up to 16 different Extenders in the same Wireless
Network.
Resetting the Extender
This is only necessary when the Extender shows unusual behavior.
To perform a reset, unplug the power adapter from the Extender. Wait a few seconds, and plug it in
again.
Firmware Update
When an update of the Extender firmware is available, this will be announced on the Marantz
Note
You can always see the current version of the firmware in the Configuration Tool.
1
Download the new version of the firmware on the PC and save it in the desired
location.
2
Unplug the Extender. You can now update it in one of the ways described below.
Updating the Extender with the Configuration Cable
1
2
3
Connect the Extender to the PC with the configuration cable (this is the crossed
Ethernet cable enclosed).
Make sure that the PC is switched to DHCP while the Extender is in configuration
(normally, this should already be the case).
Set the Configuration switch to 2 for configuration:
Configuration switch: 2
The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy
LED is red/green blinking.
4
5
Open the browser.
Type the IP address of the Extender in the address bar of the browser: 192.168.8.80.
(This is also printed on the back of the Extender.)
You may have to refresh the browser before the Configuration Tool appears.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
6
7
Select Firmware Update in the left navigation pane.
The Firmware Update page opens.
Follow the onscreen instructions.
When you are asked to browse to the update file, you need to select the ZIP file you
downloaded earlier from the website.
Updating the Extender through a Router
If the Extender is already installed and connected to equipment, it may be more convenient to
update it through the router.
1
2
The Extender is already connected to the router. Connect the router to the PC as well.
Set the Configuration switch to 3 for configuration:
Configuration switch: 3
The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy
LED is red/green blinking.
3
4
Open Wizz.it Ex on the PC.
In the Tools menu, select Extender Discovery.
The Extender Discovery tool appears, with a list of all the detected Extenders in the Wireless
Network.
5
6
7
Select the Extender that you want to configure and click on the Configure button.
The Configuration Tool opens in the browser.
Select Firmware Update in the left navigation pane.
The Firmware Update page opens.
Follow the onscreen instructions.
When you are asked to browse to the update file, you need to select the ZIP file you
downloaded earlier from the website.
Tip
When the Extender is not recognized by the Extender Discovery tool, update the Extender
directly with the configuration cable, as described on page 10.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
Specifications
General
IP based Extender box for remote RC9001 Control Panel operation
Dark grey metal housing for 19” rack mounting or free standing position
Up to 16 Extenders and 16 Control Panels in a system
Connectivity
5 VDC power input
4 addressable outputs for IR emitters
Ethernet RJ45 connection
4 standard RS232 ports for control
4 power sense inputs: 4-30 VDC or 4-30 VAC rms
4 Relay outputs: 48 VDC or 48 VAC rms, 2 A (max power 60 W)
Voltage output for general use: 5 VDC, 0.3 A
Settings
Extender ID: 16 positions
IR power output: 2 levels (normal, low)
Configuration: Use mode, configure with cross cable or via router
LED indications
3 LEDs for Power, Ethernet and Busy
4 LEDs for IR output
4 LEDs for RS232 output
4 LEDs for power sense input
4 LEDs for relay output
Dimensions/ Weight
16.9 x 9.4 x 1.8 inch (428 x 240 x 46 mm)
61.7 oz (1.75 kg)
Operating temperature
Infrared (IR)
32°F to 122°F (0°C to 50°C)
IR frequency range: 25 kHz – 1 MHz (including DC/flash codes)
IR power out: 2 levels (normal = 25 mA, low = 10 mA)
Accessories included
2 double high frequency IR emitters: wired in series, mini-jack connector, cable length
9 ft (2.7 meters)
2 mono mini-jack to mini-jack cables: 0.13 inch (3.5 mm), cable length 5 ft (1.5 m)
Power adapter 100 V-240 VAC/ 50-60 Hz (5 VDC, 2 A output, UL-CE approved)
Configuration cable
Brackets for 19 inch rack mounting
Mounting material for 19 inch rack mounting
User guide
Warranty card (For USA/Canada only)
Serial Extender User Guide
© Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki-
SHI, Kanagawa, 210-8569, Japan.
Remarks:
All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.
Marantz Brand Company – A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors
in this manual or for damages directly or indirectly resulting from the use of the RX9001 Serial Extender.
The information in this user guide may be subject to change without prior notice. All brand or product names are
trademarks or registered trademarks of their respective companies or organizations.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RX9001 User Guide
i
Download from Www.Somanuals.com. All Manuals Search And Download.
IFU Approbation / Safety Content
FCC Compliancy
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rule.
These limits are designed to provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If the equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a different circuit from the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION The user changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice for Canada / Remark pour le Canada
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du Canada
Czech
Likvidace starého výrobku
Tento výrobek je navržen a vyroben z materiálů a komponentů nejvyšší kvality, které je možné recyklovat a
opětovně použít. Pokud je výrobek označen tímto symbolem přeškrtnutého kontejneru, znamená to, že
výrobek podléhá směrnici EU 2002/96/EC. Informujte se o místním systému sběru tříděného odpadu
elektrických a elektronických výrobků. Postupujte podle místních pravidel a neodkládejte takové staré
výrobky do běžného komunálního odpadu. Správná likvidace starého výrobku pomůže předcházet
případným nepříznivým účinkům na životní prostředí a lidské zdraví.
Danish
Bortskaffelse af dit gamle produkt
Dit produkt er konstrueret med og produceret af materialer og komponenter af høj kvalitet, som kan
genbruges. Når dette markerede affaldsbøttesymbol er placeret på et produkt betyder det, at produktet er
omfattet af det europæiske direktiv 2002/96/EC. Hold dig orienteret om systemet for særskilt indsamling af
elektriske og elektroniske produkter i dit lokalområde. Overhold gældende regler, og bortskaf ikke dine
gamle produkter sammen med dit almindelige husholdningsaffald. Korrekt bortskaffelse af dine gamle
produkter er med til at skåne miljøet og vores helbred.
Dutch
Verwijdering van uw oude product
Uw product is vervaardigd van kwalitatief hoogwaardige materialen en onderdelen, welke gerecycled en
opnieuw gebruikt kunnen worden. Als u op uw product een doorstreepte afvalcontainer op wieltjes ziet,
betekent dit dat het product valt onder de EU-richtlijn 2002/96/EC. Win inlichtingen in over de manier
waarop elektrische en elektronische producten in uw regio gescheiden worden ingezameld. Neem bij de
verwijdering van oude producten de lokale wetgeving in acht en plaats deze producten niet bij het gewone
huishoudelijke afval. Als u oude producten correct verwijdert voorkomt u negatieve gevolgen voor het
milieu en de volksgezondheid.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Finnish
French
German
Vanhan tuotteen hävittäminen
Tuotteesi on suunniteltu ja valmistettu laadukkaista materiaaleista ja komponenteista, jotka voidaan
kierrättää ja käyttää uudelleen. Tuotteeseen kiinnitetty yliviivatun roskakorin kuva tarkoittaa, että tuote
kuuluu Euroopan parlamentin ja neuvoston direktiivin 2002/96/EC soveltamisalaan. Ota selvää
sähkölaitteille ja elektronisille laitteille tarkoitetusta kierrätysjärjestelmästä alueellasi. Noudata paikallisia
sääntöjä äläkä hävitä vanhoja tuotteita tavallisen talousjätteen mukana. Vanhojen tuotteiden hävittäminen
oikealla tavalla auttaa vähentämään ympäristölle ja ihmisille mahdollisesti koituvia haittavaikutuksia
Mise au rebut des produits en fin de vie
Ce produit a été conçu et fabriqué avec des matériaux et composants recyclables de haute qualité. Le
symbole d’une poubelle barrée apposé sur un produit signifie que ce dernier répond aux exigences de la
directive européenne 2002/96/EC. Informez-vous auprès des instances locales sur le système de collecte
des produits électriques et électroniques en fin de vie. Conformez-vous à la législation en vigueur et ne
jetez pas vos produits avec les déchets ménagers. Seule une mise au rebut adéquate des produits peut
empêcher la contamination de l’environnement et ses effets nocifs sur la santé.
Entsorgung Ihres alten Geräts
Ihr Gerät wurde unter Verwendung hochwertiger Materialien und Komponenten entwickelt und hergestellt,
die recycelt und wieder verwendet werden können. Befindet sich dieses Symbol (durchgestrichene
Abfalltonne auf Rädern) auf dem Gerät, bedeutet dies, dass für dieses Gerät die Europäischen Richtlinie
2002/96/EG gilt. Informieren Sie sich über die geltenden Bestimmungen zur getrennten Sammlung von
Elektro- und Elektronik-Altgeräten in Ihrem Land. Richten Sie sich bitte nach den geltenden Bestimmungen
in Ihrem Land, und entsorgen Sie Altgeräte nicht über Ihren Haushaltsabfall. Durch die korrekte Entsorgung
Ihrer Altgeräte werden Umwelt und Menschen vor möglichen negativen Folgen geschützt.
Greek
Αꢀόρριψη ꢀαλιού ꢀροꢁόντος
Το ꢀροꢁόν αυτό έχει σχεδιαστεί και κατασκευαστεί µε υψηλής ꢀοιότητας υλικά και εξαρτήµατα
ꢀου µꢀορούν να ανακυκλωθούν και να ξαναχρησιµοꢀοιηθούν. Όταν ένα ꢀροꢁόν φέρει την
ένδειξη ενός διαγραµµένου κάδου µε ρόδες, τότε το ꢀροꢁόν αυτό καλύꢀτεται αꢀό την Οδηγία
2002/96/ΕΚ. Παρακαλούµε να ενηµερωθείτε σχετικά µε το τοꢀικό σύστηµα ξεχωριστής
συλλογής ηλεκτρικών και ηλεκτρονικών ꢀροꢁόντων. Παρακαλούµε να ακολουθείτε την τοꢀική
νοµοθεσία και να µην αꢀορρίꢀτετε τα ꢀαλιά σας ꢀροꢁόντα µαζί µε τα οικιακά σας
αꢀορρίµµατα. Η σωστή µέθοδος αꢀόρριψης των ꢀαλιών σας ꢀροꢁόντων θα συµβάλει στην
αꢀοφυγή αρνητικών εꢀιꢀτώσεων στο ꢀεριβάλλον και την ανθρώꢀινη υγεία.
Hungarian Az elhasznált termék hulladékkezelése
Ezt a terméket minőségi, újrafeldolgozható és újrahasznosítható anyagok és alkatrészek felhasználásával
tervezték és készítették. A termékhez kapcsolódó áthúzott kerekes kuka szimbólum azt jelenti, hogy a
termékre vonatkozik a 2002/96/EK. Európai irányelv. Kérjük, informálódjon az elektromos és elektronikus
hulladékok szelektív gyűjtésének helyi rendszeréről. Kérjük, a helyi szabályok figyelembe vételével járjon
el, és ne dobja az elhasznált terméket a háztartási hulladékgyűjtőbe. Az elhasznált termék megfelelő
hulladékkezelése segítséget nyújt a környezettel és az emberi egészséggel kapcsolatos esetleges negatív
következmények megelőzésében.
Italian
Smaltimento di vecchi prodotti
Il prodotto è stato progettato e assemblato con materiali e componenti di alta qualità che possono essere
riciclati e riutilizzati. Se su un prodotto si trova il simbolo di un bidone con ruote, ricoperto da una X, vuol
dire che il prodotto soddisfa i requisiti della Direttiva comunitaria 2002/96/CE. Informarsi sulle modalità di
raccolta, dei prodotti elettrici ed elettronici, in vigore nella zona in cui si desidera disfarsi del prodotto.
Attenersi alle normative locali per lo smaltimento dei rifiuti e non gettare i vecchi prodotti nei normali
rifiuti domestici. Uno smaltimento adeguato dei prodotti aiuta a prevenire l’inquinamento ambientale e
possibili danni alla salute.
Norwegian Avhending av gamle produkter
Produktet er utformet og produsert i materialer og komponenter av høy kvalitet, som kan resirkuleres og
brukes på nytt. Når denne søppelbøtten med kryss på følger med et produkt, betyr det at produktet dekkes
av det europeiske direktivet 2002/96/EU. Finn ut hvor du kan levere inn elektriske og elektroniske produkter
til gjenvinning i ditt lokalmiljø. Overhold lokale regler, og ikke kast gamle produkter sammen med
husholdningsavfallet. Riktig avhending av de gamle produktene dine vil hjelpe til med å forhindre
potensielle negative konsekvenser for miljøet og menneskers helse.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
IFU Approbation / Safety Content
Polish
Usuwanie zużytych produktów
Niniejszy produkt został zaprojektowany i wykonany w oparciu o wysokiej jakości materiały i podzespoły,
które poddane recyklingowi mogą być ponownie użyte. Jeśli na produkcie znajduje się symbol
przekreślonego pojemnika na śmieci na kółkach, podlega on postanowieniom dyrektywy 2002/96/WE.
Należy zapoznać się lokalnymi zasadami zbiórki i segregacji sprzętu elektrycznego i elektronicznego.
Należy przestrzegać lokalnych przepisów i nie wyrzucać zużytych produktów elektronicznych wraz z
normalnymi odpadami gospodarstwa domowego. Prawidłowe składowanie zużytych produktów pomaga
ograniczyć ich szkodliwy wpływ na środowisko naturalne i zdrowie ludzi.
Portuguese Eliminação do seu antigo produto
O seu produto foi desenhado e fabricado com matérias-primas e componentes de alta qualidade, que
podem ser reciclados e reutilizados. Quando este símbolo, com um latão traçado, está afixado a um
produto significa que o produto é abrangido pela Directiva Europeia 2002/96/EC. Informe-se acerca do
sistema de recolha selectiva local para produtos eléctricos e electrónicos. Aja de acordo com os
regulamentos locais e não descarte os seus antigos produtos com o lixo doméstico comum. A correcta
eliminação do seu antigo produto ajuda a evitar potenciais consequências negativas para o meio ambiente
e para a saúde pública.
Slovak
Likvidácia tohto produktu
Váš produkt bol navrhnutý a vyrobený pomocou vysokokvalitných materiálov a komponentov, ktoré sa
dajú recyklovať a znova využiť. Keď sa na produkte nachádza symbol prečiarknutého koša s kolieskami,
znamená to, že tento produkt pokrýva Európska smernica 2002/96/EC. Informujte sa o miestnom systéme
separovaného zberu elektrických a elektronických výrobkov. Postupujte podľa miestnych pravidiel a
nevyhadzujte tento produkt do bežného odpadu z domácnosti. Správnou likvidáciou starého produktu
pomôžete zabrániť možným negatívnym následkom na životné prostredie a ľudské zdravie.
Slovenian
Spanish
Odlaganje starega izdelka
Izdelek je zasnovan in izdelan iz visokokakovostnih materialov in komponent, ki jih je mogoče reciklirati in
ponovno uporabiti. Če je izdelek označen s prečrtanim košem za smeti, to pomeni, da je v skladu z
Direktivo EU 2002/96/ES. Seznanite se z lokalnim sistemom za zbiranje odpadnih električnih in
elektronskih komponent. Upoštevajte lokalne predpise in izrabljenega izdelka ne odlagajte z običajnimi
gospodinjskimi odpadki. S pravilnim odlaganjem izrabljenih izdelkov pomagate preprečevati negativne
posledice na okolje in zdravje ljudi.
Desecho del producto antiguo
El producto se ha diseñado y fabricado con materiales y componentes de alta calidad, que se pueden
reciclar y volver a utilizar. Cuando este símbolo de contenedor de ruedas tachado se muestra en un
producto indica que éste cumple la directiva europea 2002/96/EC. Obtenga información sobre la recogida
selectiva local de productos eléctricos y electrónicos. Cumpla con la normativa local y no deseche los
productos antiguos con los desechos domésticos. El desecho correcto del producto antiguo ayudará a
evitar consecuencias negativas para el medioambiente y la salud humana.
Swedish
Kassering av din gamla produkt
Produkten är utvecklad och tillverkad av högkvalitativa material och komponenter som kan både återvinnas
och återanvändas. När den här symbolen med en överkryssad papperskorg visas på produkten innebär det
att produkten omfattas av det europeiska direktivet 2002/96/EG. Ta reda på var du kan hitta närmaste
återvinningsstation för elektriska och elektroniska produkter. Följ de lokala reglerna och släng inte dina
gamla produkter i det vanliga hushållsavfallet. Genom att kassera dina gamla produkter på rätt sätt kan du
bidra till att minska eventuella negativa effekter på miljö och hälsa.
Turkish
Eski ürününüzün atılması
Ürününüz, geri dönüşüme tabi tutulabilen ve yeniden kullanılabilen, yüksek kalitede malzeme ve
parçalardan tasarlanmış ve üretilmiştir. Bir ürüne, çarpı işaretli tekerlekli çöp arabası işaretli etiket
yapıştırılması, söz konusu ürünün 2002/96/EC sayılı Avrupa Yönergesi kapsamına alınması anlamına
gelir. Lütfen, elektrikli ve elektronik ürünlerin toplanması ile ilgili bulunduğunuz yerdeki sistem
hakkında bilgi edinin. Lütfen, yerel kurallara uygun hareket edin ve eskiyen ürünlerinizi, normal evsel
atıklarınızla birlikte atmayın. Eskiyen ürününüzün atık işlemlerinin doğru biçimde gerçekleştirilmesi,
çevre ve insan sağlığı üzerinde olumsuz etkilere yol açılmasını önlemeye yardımcı olacaktır.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
IFU Approbation / Safety Content
Marantz America, Inc. 100 Corporate Drive Mahwah, NJ07430
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
You can find your nearest authorized distributor or dealer on our website.
is a registered trademark.
Printed in Belgium
05/2007 00M41CW851250 mzh-d
Download from Www.Somanuals.com. All Manuals Search And Download.
|