R
Model VC5400/PMD970 User Guide
DVD Player
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Operation with Audio CD and MP3/WMA Disc . . 21-22
Playing an Audio CD and MP3/WMA Disc . . . . . 21
Notes on MP3/WMA Recordings . . . . . . . . . . . . 21
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Moving to another Track . . . . . . . . . . . . . . . 22
ꢀ Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 22
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 22
ꢀ Changing the Audio Channel . . . . . . . . . . . . 22
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 23
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 23
ꢀ Moving to another File . . . . . . . . . . . . . . . . . 23
ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 23
ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 23
ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 23
ꢀ Notes on JPEG Recordings . . . . . . . . . . . . . 23
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 24
Programmed Playback with Audio CD and
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel and Display Window . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to Optional Equipment . . . . . . . . . . . 10
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 11-15
General Explanation. . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display . . . . . . . . . . . . . . . . . . . . 11-12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15
ꢀ Initial Settings General Operation. . . . . . . . . 13
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 15
MP3/WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . 24
Programmed Playback with Video CD . . . . . . . . 24
ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 24
ꢀ Erasing a Track from Program List. . . . . . . . 24
ꢀ Erasing the Complete Program List . . . . . . . 24
Additional Information . . . . . . . . . . . . . . . . . . . . . 25
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 25
HDCD Playback. . . . . . . . . . . . . . . . . . . . . . . . . 25
Operation
Operation with DVD and Video CD . . . . . . . . . 16-20
Playing a DVD and Video CD. . . . . . . . . . . . . . . 16
ꢀ Exchanging discs during playback . . . . . . . . 16
ꢀ Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16
ꢀ Exchanging the disc and starting playback. . 16
General Features. . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 17
ꢀ Moving to another CHAPTER/TRACK . . . . . 17
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Paus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Still Picture and Frame-by-Frame Playback . 17
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 19
Special DVD Features . . . . . . . . . . . . . . . . . . . . 19
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19
ꢀ Changing the Audio Language. . . . . . . . . . . 19
ꢀ Changing the Audio Channel . . . . . . . . . . . . 19
ꢀ Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . . . 20
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Speaker Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 28
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
ꢀ
Moving to another GROUP . . . . . . . . . . . . . . 20
ꢀ Viewing another PAGE. . . . . . . . . . . . . . . . . 20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-related terms
Playable Discs
Title (DVD video discs only)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
DVD video discs
(8 cm / 12 cm disc)
DVD audio discs
(8 cm / 12 cm disc)
Chapter (DVD video discs only)
Video CD (VCD)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a HDCD, DVD-R,
DVD RW, Kodak PICTURE CD, SVCD, and CD-R or
CD-RW that contains audio titles, MP3, WMA or JPEG
files.
Group (DVD audio discs only)
The main audio content or accompanying feature
content or additional feature content, or music album.
Each group is assigned a group reference number
enabling you to locate it easily.
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD-R/ RW) disc itself,
some CD-R/RW (or DVD-R/ RW) discs cannot be
played on the unit.
Track (DVD audio discs,Video CD and audio CD
only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
–
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or other functions may be added.
A scene is composed of one or several tracks.
Types of video CDs
There are two types of video CDs:
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be played on the unit.
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
2
for playback of region “2” encoded DVD soft-
ware. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled “2” or “ALL”. If you
try to play any other discs, the message “Check Regional
Code” will appear on the TV screen. Some DVD discs
may not have a region code label even though their play-
back is prohibited by area limits.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
HDCD (High Definition Compatible Digital®)
HDCD® (High Definition Compatible Digital®) is a
recording system that has improved audio CD sound in
dynamic range, sound field reproducibility and vocal
acoustics.
This DVD player is equipped with an HDCD decoder.
The HDCD indicator illuminates when playing an
HDCD-encoded audio CD.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Precautions
Storing discs
After playing, store the disc in its case.
Handling the unit
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Cleaning discs
When setting up the unit
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About Symbols
About the
symbol display
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
For details, please contact your nearest dealer.
DVD-V DVD Video discs
DVD-A DVD Audio discs
Notes on Discs
Handling discs
VCD2.0
Video CDs with the PBC (playback control)
function.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
VCD1.1
Video CDs without the PBC (playback control)
function.
CD
Audio CDs.
Do not stick paper or tape on the disc.
MP3 MP3 disc.
WMA disc.
WMA
JPEG disc.
JPEG
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel and Display Window
STANDBUY
Disc Tray
Insert a disc here.
Display window
Shows the current
status of the player.
/
OPEN/CLOSE (
)
Lights green when the
Opens or closes the
DVD player is turned on.
disc tray.
DISC SKIP
Remote Sensor
Moves to the next
POWER
available disc tray.
ON/STANDBUY
Switches the
player ON and
OFF.
Go to beginning Qof curSrent
chapter/track or to PREVIOUS chap-
ter/track.
Reverse Skip/Scan (
/
)
Press and hold for two seconds for a
fast reverse search.
Go to NEXT chapter/trRack.
Press and hold for two seconds for
a fast forward search.
Forward Skip/Scan (
T
/
)
PLAY ( 2)
Starts playback.
DISC EX-CHANGE
Changes a disc (other than the
one playing) during playback
STOP ( 9)
Stops playback.
PAUSE ( ; )
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
ANGLE Lights when multi angles are
present.
A light will appear if a disc is in the
disc tray. The current disc tray flashes.
TITLE Indicates current title number
DVD
DVD video disc inserted
CHP/TRK Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG. Programmed playback active
DVD A
DVD audio disc inserted
CD Audio CD inserted
VCD Video CD inserted
HD CD HDCD disc inserted
RANDOM RANDOM
MP3 MP3 or WMA disc inserted
playback active
Indicates current player function:
Playback, Pause, etc.
Indicates repeat
mode
MP3 VCD HD CD DVD A
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
1
2
5
3
4
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
MARKER •
OPEN/CLOSE
Marks any point during playback.
Opens and closes the disc tray.
SEARCH •
ANGLE
Displays MARKER SEARCH menu.
Selects a DVD camera angle if
available
POWER
Switches DVD Player ON and OFF.
RANDOM
Plays tracks in random order.
AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
PROGRAM
Enters to the program edit mode or
exits from that.
SUBTITLE
Selects a subtitle language.
CLEAR
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
0-9 number buttons
Selects numbered items in a menu.
Reverse SKIP/SCAN ( S ) •
Search backward*/ go to beginning
of current chapter or track or go to
previous chapter or track.
• ZOOM
Enlarges video image.
• STOP ( 9)
Stops playback.
* Press and hold button for about
two seconds.
• PAUSE/STEP ( ;)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
PLAY (
H
) •
Starts playback.
Forward SKIP/SCAN ( T ) •
Search forward*/ go to next chap-
ter or track.
SELECT/ENTER
Acknowledges menu selection.
SLOW ( , / . )
Reverse/ Forward slow playback.
OSD
Accesses On-Screen display.
1 2 3 4 (left/right/up/down)
- Selects an item in the menu.
- Selects channel of TV and
changes volume of TV.
MENU
Accesses menu on a DVD disc.
TOP MENU •
Displays the discs Top menu, if
available.
• REPEAT
Repeat chapter, track, title, all.
SETUP •
Accesses or removes setup menu.
• A-B
Repeat sequence.
RETURN •
- Removes the setup menu.
- Displays the menu of a video
CD with PBC.
• DISC SKIP
Moves to the next available disc tray.
- Selects AUX A/V input channel of
TV.
Remote control battery installation
Detach the battery cover on the rear of
the remote control, and insert two R03
Remote Control Operation Range
Point the remote control at the remote sensor and
press the buttons.
(size AAA) batteries with
aligned correctly.
and
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor.
Caution
ꢀ Angle: About 30° in each direction of the front of the
remote sensor.
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
**REMOTE CONTROL
INTERNAUEXTERNAL
Switch
* REMOTE CONTROL IN/OUT jack
VIDEO OUT
Connect to a TV with video inputs.
5.1 CHANNEL AUDIO OUT
Connect to a 5.1 channel receiver
– center speaker connection
– subwoofer connection
– front speakers connections
– rear (surround) speakers connections
S-VIDEO OUT
Connect to a TV with S-Video inputs.
RS232C Terminal
AC Power Cord
Plug into the power source.
Control terminal for use by
custom installers.
* REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component uslng a supplled System Control cable, you
can remotely operate the components as a single system.
• When connecting to component with a remote sensor, be sure to connect the “REMOTE CONTROL IN” jack of
this DVD player to the “REMOTE CONTROL OUT” jack of the component with the remote semsor.
• When connecting to component which is not equipped with a remote sensor, be sure to connect the component to
the “REMOTE CONTROL OUT” jack of this DVD player.
** Remote switch
• When using this DVD player independently, set this switch to “INTERNAL”. When using this DVD player in a sys-
tem with a Marantz receiver equlpped with a remote sensor, set the switch to “EXTERNAL”.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Progressive Scan (ColorStream® pro) connection
Tips
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible.
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
ꢀ For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment” on page 10.
Connect the COMPONENT VIDEO OUT/
1
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
Caution
2
the DVD Player to the audio left/right in jacks on the
–
Make sure the DVD Player is connected directly to the
TV (A) using the supplied audio cables.
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Notes
– Set the Progressive to “On” on the setup menu for
progressive signal, see page 13.
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
Connecting to a TV
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
Rear of TV
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
VIDEO
INPUT
Video connection
AUDIO INPUT
Connect the VIDEO OUT jack on the DVD Player to
Y
Pr
Pb
R
L
L
1
2
the video in jack on the TV using the video cable (V).
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
S-Video connection
S
C
A
V
Connect the S-VIDEO OUT jack on the DVD Player
1
to the S-Video in jack on the TV using the S-Video
cable (S).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO OUT/
1
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
2
the DVD Player to the audio left/right in jacks on the
Rear of DVD player
TV (A) using the audio cables.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Connecting to Optional Equipment
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital)
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
Connect one of the DVD Player’s DIGITAL AUDIO
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
Connect the CENTER and WOOFER jacks for the
responding in jack on your amplifier. Use an option-
1
Center speaker and the Subwoofer (C) to the corre-
al digital (optical O or coaxial X) audio cable.
sponding in jacks on your receiver.
You will need to activate the player’s digital output.
Connect the Left and Right FRONT speaker jacks
2
(See “Digital Audio Output” on page 14).
2
3
4
(F) to the corresponding in jacks on your receiver.
Connect the Left and Right REAR speaker jacks
Digital Multi-channel sound
(R) to the corresponding in jacks on your receiver.
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu.
See page 14.
Rear of DVD player
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Rear of DVD player
F
C
R
Center Subwoofer
O
X
A
Front R
Rear R
Front L
Rear L
ANALOG 5.1CH
AUDIO INPUT
Amplifier (Receiver)
R
L
OPTICAL
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Press 1/2to change the setting of an item.
3 The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
Caution:
Before using the remote control, press the DVD or TV
button to select the device to be operated.
Temporary Feedback Field Icons
General Explanation
TITLE
Repeat Title
This manual gives basic instructions for operating the
DVD Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
CHAPT
Repeat Chapter
GROUP
Repeat Group (DVD audio discs only)
occurs, the symbol
appears on the TV screen, indi-
TRACK
Repeat Track (non-PBC Video CDs and DVD
cating that the operation is not permitted by the DVD
Player or is not available on the disc.
audio discs only)
ALL
Repeat All Tracks (non-PBC Video CDs only)
On-Screen Display
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
A
B
Repeat A-B
OFF
Repeat Off
Resume play from this point
Action prohibited or not available
On-screen display operation
Press OSD during playback.
Notes
1
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
Press 3/4to select an item.
2 The selected item will be highlighted.
DVD-V
Items
Function (Press 3/4to select desired item)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
1
/
2
, or
1 /3
1 /12
Numbers, SELECT/ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
1
/
2
, or
Numbers, SELECT/ENTER
0:20:09
Numbers, SELECT/ENTER
Audio language
and Digital Audio
Output mode
1 ENG
D
5.1 CH
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
/
2
, or
AUDIO
Subtitle language
Shows the current subtitles language, and
changes the setting.
Shows the current angle number and total number of
angles, and changes the angle number.
1 2
, or
/
ABC
OFF
1 /1
SUBTITLE
Angle
1
/
2
, or
ANGLE
Sound
Shows the current sound mode, and
changes the setting.
1
/
2
, or
NORM.
SOUND
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
On-Screen Display (Continued)
d
DVD-A
Items
Function (Press 3/4to select desired item)
Selection Method
Group Number
Shows the current group number and total number
of groups, and skips to the desired group number.
1
/
2
, or
2 /6
1 /12
Numbers, SELECT/ENTER
Track Number
Time search
Shows the current track number and total number
of tracks, and skips to the desired track number.
Shows the elapsed playing time.(Display only)
1
/
2
, or
Numbers, SELECT/ENTER
0:10:15
_
DVD Audio
Shows the current encoding method, and channel
number, and changes the setting.
1
1
/
2
, or
Output mode
PPCM
5 CH
AUDIO
Shows the current subtitles language, and
changes the setting.
Shows the current page (or angle) number and total number
of pages (or angle), and changes the page (or angle) number.
1 2
, or
/
Subtitle language
Page (or Angle)
ABC
OFF
SUBTITLE
1
/
2
, or
1 /12
or
ANGLE
1 /1
VCD1.1
VCD2.0
Items
Function (Press 3/4to select desired item)
Selection Method
Track Number
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1
/
2
, or
1 /4
Numbers, SELECT/ENTER
Time
Shows the elapsed playing time (Display only)
0:20:09
–
Audio Channel
Shows the audio channel, and
changes the audio channel.
1
/
2
, or
STER.
AUDIO
Sound
Shows the current sound mode, and
changes the setting.
1
/
2
, or
NORM.
SOUND
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Initial Settings
Picture
You can set your own Personal Preferences on the
player.
TV Aspect DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
Initial Settings General Operation
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Scan style is played back in that style (Both sides of the
picture are cut off).
Press SETUP.
1
The setup menu appears.
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
16:9 Wide: Select when a 16:9 wide TV is connected.
German
Spanish
Italian
4:3 Letterbox
4:3 Panscan
16:9 Wide
Rating
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Country Code
Hungarian
Other – – – –
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Press 3/4to select the desired item.
2 The screen will show the current setting for the
selected item, as well as alternate setting(s).
Progressive Scan DVD
While the desired item is selected, press 2, then
Progressive Scan Video provides the highest quality
pictures with less flickering.
3 3/4to select the desired setting.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
Press SELECT/ENTER to confirm your selection.
4 Some items require additional steps.
Press SETUP, RETURN, or PLAY to exit the
5 setup menu.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Language
Off
On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Disc Language DVD
Select a language for the disc’s Menu, Audio, and
Subtitle.
Country Code
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 28. If you enter the wrong language
code, press CLEAR.
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
Note
German
Spanish
Italian
Rating
Progressive Scan only works when the system is set to
NTSC or AUTO. Also if the system is set to AUTO,
Progressive Scan only works during DVD of NTSC
system is playing back .
Country Code
TV Aspect
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Hungarian
Other – – – –
Caution
Once the setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is play-
ing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Sound
Others
Digital Audio Output
The DRC, Vocal, PBC and Auto Play settings can
be changed.
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected the DVD Player’s DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected
the DVD Player’s DIGITAL OUT jack to an amplifier or
other equipment with a DTS decoder, Dolby Digital
decoder or MPEG decoder.
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
ꢀ Press 3/4to select the desired item and press
SELECT/ENTER. The setting of the selected item is
changed between On and Off.
Disc Audio
Disc Subtitle
Disc Menu
Rating
DRC
On
On
On
Off
Vocal
PBC
Auto Play
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
DOLBY
Disc Audio
Disc Subtitle
Disc Menu
Rating
DIGITAL /PCM
Stream/PCM
PCM
Country Code
Sample Freq.
48 KHz
TV Aspect
Menu Language
96KHz
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Sample Frequency
To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
Auto Play DVD
You can set up the DVD Player so a DVD disc automat-
ically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search a title that playback time is long most and then
5.1 Speaker settings DVD
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See “Speaker Settings”, page 27.)
play back the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Disc Audio
Disc Subtitle
Note
R
R
Disc Menu
Rating
The Auto Play function may not work for some DVDs.
Front L
Volume
Size
Country Code
0 dB
Large
1 ft
TV Aspect
Menu Language
Distance
Test
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Return
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Parental Control
DVD
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 29.).
Rating DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
Code Set
Disc Subtitle
Disc Menu
U
C
S
N
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
8
Disc Audio
7
Disc Subtitle
6
Disc Menu
Select Country Code using the 3/4buttons on
the setup menu.
5
Rating
1
4
Country Code
3
TV Aspect
While Country Code is selected, press 2.
2
Menu Language
2
3
4
1
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Unlock
Change
Follow step 3 of “Rating” on left.
Select the first character using the 3/4buttons.
Shift the cursor using 2 button and select the
5 second character using 3/4buttons.
Select “Rating” on the Setup menu using the
1
2
3/4buttons.
While “Rating” is selected, press 2.
Press SELECT/ENTER to confirm your country
6 code selection, then press SETUP to exit the
menu.
When you have not entered a password yet.
3 Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password.
then press SELECT/ENTER. Enter the 4-digit pass-
word again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press SELECT/ENTER.
Note
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below.).
Changing the 4-digit code
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press SELECT/ENTER.
3 Select Change using 3/4buttons then press
SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Select a rating from 1 to 8 using the 3/4but-
4 tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
4 Enter the new 4-digit code, then press
SELECT/ENTER.
5 Enter exactly the same code a second time and veri-
fy by pressing SELECT/ENTER.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
6 Press SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared. “P CLr” appears on the
display for a moment.
Enter a new code as shown above to the left (Rating).
Press SELECT/ENTER to confirm your rating
5 selection, then press SETUP to exit the menu.
3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
Playing a DVD and Video CD
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 15).
VCD2.0
VCD1.1
Playback Setup
DVD-V
DVD-A
ꢀ Turn on the TV and select the video input source con-
nected to the DVD player.
– DVDs may have a region code.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the DVD player.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
Press OPEN/CLOSE to open the disc tray.
1
Exchanging discs during playback
Load your chosen disc in the tray, with the
ꢀ Press DISC EX-CHANGE on the front panel during
playback to open the disc tray.
2 playback side down.
Do not load a disc in the
left and light side position.
ꢀ Press DISC SKIP to rotate the disc trays to the
desired position. The carousel will rotate clockwise by
one disc increments.
Center position
ꢀ Exchange the discs and press DISC EX-CHANGE or
OPEN/CLOSE to close the disc tray.
• Discs can be loaded one at a time by pressing
DISC SKIP to rotate the carousel.
Note
– The disc tray presently loaded in the play position can
Press OPEN/CLOSE to close the tray.
3 READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
not be exchanged.
Skipping discs
Press DISC SKIP during play or when playback is
stopped.
In some cases, the disc menu might appear
instead.
Notes
If a menu screen is displayed
– When DISC SKIP is pressed, the disc tray rotates and
playback begins from the beginning of the next disc.
– If there is no disc on the next disc tray, the following
disc tray will be selected.
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
DVD-V
– When DISC SKIP is pressed during playback of disc
5, playback of disc 1 will start.
Use the 1 234 buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start play-
back.
Exchanging the disc and starting playback
Press TOP MENU or MENU to return to the menu
screen.
1.Press OPEN/CLOSE during playback or when play-
back is stopped.
DVD-A
Play stops (if pressed during playback), the disc tray opens
and the disc that was in the play position comes to the front.
2.Exchange the disc.
Use the 1 2 3 4 buttons to select an option you
want, then press SELECT/ENTER to view the option.
3.Press OPEN/CLOSE or PLAY again.
The tray closes and playback begins (with the disc
that was in front).
VCD2.0
ꢀ Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
ꢀ Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
14.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
General Features
Still Picture and Frame-by-frame playback
VCD2.0
VCD1.1
DVD-V
DVD-A
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote con-
trol.
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
1 /3
DVD-V
Moving to another TITLE
Note
When a disc has more than one title, you can move to
another title as follows:
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
ꢀ Press OSD, then press the appropriate numbered
button (0-9) to select a title number.
VCD2.0
VCD1.1
Slow Motion
DVD-V
DVD-A
Moving to another CHAPTER/GROUP/
1 Press SLOW t or T during playback.
VCD1.1
TRACK
DVD-V
DVD-A
The player will enter SLOW mode.
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
1 /12
1 /12
1 /3
1/6
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/group/track as follows:
ꢀ
Press SKIP/SCAN . or > briefly during
playback to select the next chapter/group/track or to return
to the beginning of the current chapter/group/track.
Press . twice briefly to step back to the previous chap-
ter/group/track.
Note
Slow motion playback in reverse is not applicable for
Video CD.
ꢀ
ꢀ
VCD2.0
VCD1.1
Random Karaoke DVD
To go directly to any chapter during DVD playback, press
OSD. Then, press 3/4to select the
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM(1-3)” appears on the display window.
• RANDOM1: Plays all the tracks on a single disc in random
order and then stops.
chapter/group/track icon. Then, enter the chapter/group/track
number using the numbered buttons (0-9).
Note
• RANDOM2: Plays all the tracks on current disc in
random order and then plays all the tracks on each suc-
ceeding disc in random order and then stops.
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
• RANDOM3: Plays 2 tracks randomly from a disc and then
plays 2 tracks randomly from a different disc until all
tracks on all discs have been played.
VCD2.0
VCD1.1
Search
DVD-V
DVD-A
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the display window.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
Tips
By pressing SKIP/SCAN > during Random playback,
the unit selects another title (track) and resumes
Random playback.
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
Note
3 To exit SEARCH mode, press PLAY.
ꢀ This function only works with DVD Karaoke discs and
video CD without PBC.
Note
ꢀ On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See
page 14.
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
Pause
DVD-A
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
General Features (continued)
0:20:09
-:--:--
Time Search
DVD-V
VCD2.0
VCD1.1
Repeat A-B
DVD-V
DVD-A
The Time Search function allows you to start playing at
any chosen time on the disc.
A
*
A
B
OFF
1 Press OSD during playback. The on-screen display
appears on the screen.
To repeat a sequence in a title or group:
The Time Search box shows the elapsed playing time of the
current disc.
1 Press A-B at your chosen starting point.
“ A * ” appears briefly on the TV screen.
2 Within 10 seconds, press 3/4to select the Time
Search icon in the on-screen display.
2 Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins (“AsB” appears the display window).
The “-:--:--” appears in the Time Search box.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
3 To cancel the sequence, press A-B.
VCD2.0
VCD1.1
Repeat
DVD-V
DVD-A
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
1/6
TITLE
TRACK
CHAPT
ALL
OFF
4 Within 10 seconds, press SELECT/ENTER to confirm
the start time.
DVD Video Discs - Repeat Chapter/Title/Off
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
3D SUR
NORM.
VCD2.0 VCD1.1
3D Surround
DVD-V
2 To repeat the title currently playing, press REPEAT a
second time.
This unit can
produce a 3D Surround effect, which
The Repeat Title icon appears on the TV screen.
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
DVD Audio Discs - Repeat Track/Group/Off
1 Press OSD during playback.
1 To repeat the currently playing track, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 Press 3 or 4 to select the sound option.
The sound option will be highlighted.
2 To repeat the group currently playing, press REPEAT
a second time.
3 Press 1 or 2 to to select “3D SUR”.
The Repeat Group icon appears on the TV screen.
To turn off the 3D Surround effect, select “NORM”.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
VCD2.0
VCD1.1
Zoom
DVD-V
DVD-A
Video CDs - Repeat Track/All/Off
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to acti-
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time.
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
2 Use the 1 234 buttons to move through the zoomed
The Repeat Off icon appears on the TV screen.
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
Note
On a Video CD with PBC, you must set PBC to Off on the
Note
setup menu to use the Repeat function. See page 14.
ꢀ The zoom function may not work for some DVDs.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
General Features (continued)
DVD-A
DVD-V
Disc Menu
1 Press MENU.
VCD2.0
VCD1.1
DVD-V
Marker Search
The disc menu is displayed.
MARKER SEARCH
1/9
2 To remove the disc menu, press MENU again.
You can start playback from a memorized point. Up to
nine points can be memorized.
1 /1
DVD-A
DVD-V
Camera Angle
To enter a mark, follow these steps.
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
ꢀ Press ANGLE repeatedly during playback to select a
desired angle.
The Marker icon will appear on the TV screen briefly.
The number of the current angle appears on the display.
2
Repeat step 1 to enter up to nine Marker points on a disc.
To Recall a Marked Scene
Changing the Audio Language
1
1 ENG
D
1 During disc playback, press SEARCH.
PPCM
5 CH
5.1 CH
DVD-V
DVD-A
The MARKER SEARCH menu will appear on the screen.
2 Within 10 seconds, press 1/2 to select a Marker
Press AUDIO repeatedly during playback to hear a dif-
ferent audio language or audio track.
number that you want to recall.
3 Press SELECT/ENTER.
Playback will start from the Marked scene.
VCD2.0
VCD1.1
Changing the Audio Channel
4 To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (STER., LEFT or RIGHT).
ABC
1 During disc playback, press SEARCH.
1 ENG
DVD-V
DVD-A
Subtitles
The MARKER SEARCH menu will appear on the screen.
Press SUBTITLE repeatedly during playback to see the
2 Press 1/2 to select the Marker number that you want
different subtitle languages.
to erase.
3 Press CLEAR.
Note
The Marker number will be erased from the list.
If
appears, the feature is not available on the disc.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
DVD-V
DVD-A
Special DVD Features
Checking the contents of DVD discs:
Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press SELECT/ENTER.
DVD-A
DVD-V
Title Menu
1 Press TOP MENU.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP MENU again.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
DVD-A
DVD Audio Discs
1 /12
Viewing another PAGE
DVD-A
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1 Press OSD during playback.
DVD Audio is a new disc format building on the success
of DVD to provide high quality, uncompressed, multi-
channel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on the disc jacket or on the disc itself.
DVD Audio can provide higher quality stereo than Audio
CDs with a sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
A typical DVD Audio disc contains up to seven times the
data capacity of a CD. This additional space is used for
music, either Advanced Resolution multi-channel sound
quality that is closer to the artist’s master recording or
for longer recordings. Many DVD Audio discs contain
on-screen text, such as artist biographies, playlists, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
2 Press 3/4to select Page icon.
3 Press 1/2 to select a page number.
What appears on the screen will vary from disc to disc
because the information available depends upon the way the
disc was created.
Note
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you’re playing.
Note
To enjoy maximum sound quality and surround effect of
DVD Audio, you must use 5.1 channel analog audio output
(5.1CH AUDIO OUT jacks on the DVD Player). If you use
the DIGITAL OUT (OPTICAL or COAXIAL) for your audio
connection, the sound will only be similar to CD-quality
sound even though you’re playing a DVD Audio disc.
1/6
Moving to another GROUP
DVD-A
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access dif-
ferent groups during playback via the on-screen display.
1 Press OSD during playback on in stop mode.
2 Press 3/4to select Group icon.
3 Press 1/2 or the numbered buttons (0-9) to select a
group number.
Note
Sometimes the author of the disc creates hidden con-
tent that can only be accessed by entering a password.
If the lock icon appears on the TV screen, enter the
password (sometimes you’ll find it on the disc’s jacket
cover or on a web site). This password control isn’t dic-
tated by your DVD Player — it is a function of the disc.
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you’re playing.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio CD and MP3/WMA Disc
Notes on MP3/WMA Recordings
Playing an Audio CD and MP3/WMA Disc
About MP3
CD
MP3
WMA
ꢀ An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
ꢀ The player can not read an MP3 file that has a file
extension other than “.mp3”.
The DVD Player can play MP3/WMA formatted record-
ings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
MP3/WMA Recordings on right.
Insert a disc and close the tray.
About WMA(Window Media Audio)
1
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
ꢀ An WMA file is a Microsoft audio compression
technology.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
ꢀ WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3 WMA
JPEG
MP3/WMA Disc compatibility with this player is
limited as follows:
Press 3/4to select the MP3/WMA then press
1. Sampling Frequency / only at 44.1kHz (MP3),
2
SELECT/ENTER.
22.05 - 44.1kHz (WMA)
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback
MP3/WMA files. We recommend that you use “Easy-
CD Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3/WMA files in the
first track. If there is no MP3/WMA file in the 1st
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc or use a new one.
Program
MP3 WMA
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Clear All
OFF
00:00
Press 3/4 to select a folder, and SELECT/ENTER.
3 A list of files in the folder appears.
6. File names should be named using 8 letters or less
and must incorporate “.mp3” or “.wma” extension
e.g. “********.MP3” or “********.WMA”.
Press 3/4to select a track then press PLAY or
4
SELECT/ENTER.
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
7. Do not use special letters such as “/ : * ? “ < > ” etc.
8. Total number of files on the disc should be less than
650.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
Program
Program
MP3 WMA
CD
TRACK01
TRACK 1.mp3
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Clear All
OFF
Clear All
NORM.
00:00
1
0: 56: 18
STER.
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
Audio CD menu
MP3/WMA menu
Tip
If you are in a file list and want to return to the Folder
list, use the 3/4to highlight
and press
SELECT/ENTER to return to the previous menu screen.
To stop playback at any other time, press STOP.
5
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio and MP3/WMA Disc (Continued)
CD
MP3
CD
WMA
Pause
Repeat A-B
1 Press PAUSE/STEP during playback.
To repeat a sequence.
2 To return to playback, press PLAY or press
1 During disc playback, press A-B at your chosen start-
PAUSE/STEP again.
ing point.
The Repeat icon and “ * ” appears on the menu screen.
A
CD
MP3
2 Press A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
WMA
Moving to another Track
ꢀ Press SKIP/SCAN . or > briefly during
playback to go to the next track or to return to the
3 To exit the sequence and return to normal play, press
beginning of the current track.
A-B again.
ꢀ Press SKIP/SCAN . twice briefly to step back to
The Repeat icon and “OFF” appears on the menu screen.
the previous track.
ꢀ In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
CD
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
CD
MP3
WMA
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
1 Press OSD during playback.
2 Use 1 or 2 to select the sound option.
2 To repeat all tracks on a disc, press REPEAT a sec-
The sound option will be highlighted.
ond time.
3 Use 3 or 4 to to select “3D SUR”.
The Repeat icon and “ALL” appears on the menu screen.
To turn off the 3D Surround effect, select “NORM”.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
CD
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
CD
MP3
WMA
Search
different audio channel (STER., LEFT, or RIGHT).
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3 To exit SEARCH mode, press PLAY.
CD
MP3
WMA
Random
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
RANDOM or “RAND.” appears on the display window
and menu screen.
2 To return to normal playback, press RANDOM repeat-
edly until RANDOM or “RAND.” disappears on the
display window and menu screen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with JPEG Disc
JPEG
Moving to another File
Viewing a JPEG disc
Press SKIP/SCAN . or > once during viewing a
This DVD Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
picture to advance to the next file or to the previous file.
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
Insert a disc and close the tray.
1
The MP3/WMA-JPEG choice menu appears on the
TV screen.
MP3 WMA
JPEG
To flip the picture
Press 3/4during showing a picture to flip the
picture horizontally or a vertically.
Press 3/4to select the JPEG then press
2 SELECT/ENTER.
To rotate picture
The JPEG menu appears on the TV screen.
Press 1/2 during showing a picture to rotate the
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
picture clockwise or counter clockwise.
Notes on JPEG Recordings
Off
Slide Speed
ꢀ Depending upon the size and number of the JPEG
files, it could take a long time for the DVD player to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the files
are too big — reduce the resolution of the JPEG files
to less than 2 mega pixels and burn another disc.
Press 3/4 to select a folder, and SELECT/ENTER.
3 A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
ꢀ Total number of files and folders on the disc should
Tip
be less than 650.
If you are in a file list and want to return to the Folder
ꢀ Some disc may be incompatible due to different
recording format or condition of disc.
ꢀ When you are using software such as “Easy CD
Creator” to burn the jpeg files into the CD-R, ensure
that all the selected files have the “.jpg” extensions
when copying into the CD layout.
list, use the 34 buttons on the remote to highlight
“
and press SELECT/ENTER to return to the
”
previous menu screen.
If you want to view a particular file, press 3/4to
4 highlight a file and press SELECT/ENTER or
PLAY.
ꢀ If the files have “.jpe” or “.jpeg” extensions, please
Viewing the file proceeding starts.
rename them as “.jpg” files.
During viewing a file, press RETURN to move to
ꢀ File names without “.jpg” extension will not be able to
be read by this DVD player. Even though the files are
shown as JPEG image files in windows explorer.
the previous menu (JPEG menu).
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
Folder1
JPEG
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768 Picture5.jpg
Off
5/32
1024X768
Slide Speed
Tip
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
Speed then press 3/4 to select the option you want to
use, and press SELECT/ENTER.
To stop viewing at any other time, press STOP.
5 The JPEG menu appears.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD2.0
VCD1.1
CD
MP3
WMA
Programmed Playback
Programmed Playback with Audio CD
and MP3/WMA Disc
Programmed Playback with Video CD
Note
The Program function enables you to store your favorite
tracks from any disc in the player memory.
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 14.
Program can contain 30 tracks.
Insert Video CD and close the tray.
1
2
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
1
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
E
The
mark will appear to the right of the word Program
on the right side of the menu screen.
Program
E
VCD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Note
Press PROGRAM to exit the Program Edit mode;
E
the
mark will disappear.
Clear All
Select a track, then press SELECT/ENTER to
2 place the selected track on the Program list.
Note
Repeat step 2 to place additional tracks on the
Press RETURN or PROGRAM to exit the Program menu.
3 Program list.
Follow steps 2-6 of “Programmed Playback with
E
Program
E
Program
MP3 WMA
CD
3 Audio CD and MP3/WMA disc” on left.
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 8.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 1.mp3
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
To resume normal playback from
4 programmed playback, press PROGRAM.
Clear All
NORM.
Clear All
OFF
“PROG.” indicator disappears in the display window.
0: 56: 18
STER.
00:00
3
Repeat Programmed Tracks
Audio CD menu
MP3/WMA menu
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
Press 2.
The programmed track you selected last is highlighted on
4
the program list.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
Press 3/4to select the track you want to start
The Repeat icon and “ALL” appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
5 playing.
Press TOP MENU to move to the next page.
Press MENU to move to the previous page.
Press PLAY to start.
Erasing a Track from Program List
Playback begins in the order in which you programmed
the tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
6
7
1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the
Program Edit mode.
E
The
mark will appear.
To resume normal playback from pro-
grammed playback, select a track of CD (or
MP3/WMA) list and then press
SELECT/ENTER.
“PROG.” indicator disappears on the menu screen.
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use 3/4to select “Clear All”, then press
SELECT/ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Screen Saver
The screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
VCD2.0
VCD1.1
DVD-V
Video Mode Setting
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ To change the video mode, press and hold DISPLAY
about 3 seconds during disc playback. The new video
mode number selected is displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
ꢀ Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
ꢀ If you turn off the power, the video mode will be back
to initial state (MODE1).
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video based
material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with compar-
atively little motion.
Note
The video mode setting only works when the Progressive
Scan mode is set to “On” in the Setup menu.
HDCD Playback
HDCD is a process that increases the fidelity of both
specially encoded HDCD discs and standard CD audio
discs. When an HDCD-encoded disc is playing, the spe-
cial decoder is automatically activated and the HDCD
Indicator lights. No user intervention is required.
To enjoy the benefits of HDCD, your DVD Player must
be connected to your A/V receiver via the Analog Audio
Outputs. However, if your A/V receiver or surround
processor is equipped with built-in HDCD decoding, you
may also use a Coaxial or Optical digital audio connec-
tion so that the HDCD processing is done there.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
ꢀ The TV is not set to receive DVD signal ꢀ Select the appropriate video input mode
No picture.
output.
on the TV so the picture from the DVD
player appears on the TV screen.
ꢀ The video cable is not connected
ꢀ Connect the video cable securely.
securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
No sound.
ꢀ The equipment connected with the
audio cable is not set to receive DVD
signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
ꢀ The audio cables are not connected
ꢀ Connect the audio cable securely.
securely.
ꢀ The power of the equipment connected
ꢀ Turn on the equipment connected with
with the audio cable is turned off.
the audio cable.
ꢀ The Digital Audio Output is set to the
ꢀ Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
wrong position.
The playback picture is ꢀ The disc is dirty.
ꢀ Clean the disc.
poor.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
The DVD player does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional code.)
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Rating level is set.
ꢀ Cancel the Rating function or change
the rating level.
The remote control
ꢀ The remote control is not pointed at the
ꢀ Point the remote control at the remote
remote sensor of the DVD player.
sensor of the DVD player.
does not work properly.
ꢀ The remote control is too far from the
ꢀ Operate the remote control within 23 ft
DVD player.
(7 m).
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
remote control and the DVD player.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Settings
Make the following settings for the built-in 5.1 channel
surround decoder.
Distance
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the sound
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the listen-
er at the same time. (1 ft = 30.48 cm)
Disc Audio
Disc Subtitle
R
R
Disc Menu
Rating
Front L
Volume
Size
Country Code
0 dB
Large
1 ft
TV Aspect
Test
Menu Language
Distance
Test
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Press SELECT/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of test
signals memorized in the system.
Return
ꢀ Front Left (L) → Front Right (R) → Center
→ Rear Left (L) → Rear Right (R)
Select “5.1 Speaker Setup” using the 3/4but-
tons on the setup menu.
Return
1
Press SELECT/ENTER to return to the previous menu.
While “5.1 Speaker Setup” is selected, press 2
2 button.
Press 1/2buttons to select the desired speaker.
3
Adjust options by using 3 41 2buttons.
4
Speaker selection
Select a speaker that you want to adjust. (Front speak-
ers (Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press 1/ 2to adjust the output level of the selected
speaker. (-10dB - 0dB)
Size
ꢀ Press 1/ 2to set a mode. (Large, Small or None)
ꢀ If you have connected the system to a speaker with
a low frequency of 100Hz or below, select “Large.”
ꢀ If you have connected the system to a speaker with-
out a low frequency of 100Hz or below, select
“Small.” If you have not connected a subwoofer,
always select “Large” for Front speaker (L/R).
ꢀ When you do not have a certain speaker connected,
select “None.”
ꢀ Front L/R speaker’s size can be set to “Large” or
“Small.”
ꢀ If Front L/R speaker’s size is set to “Small,” Rear and
Center speaker’s size can be set to “Small” or
“None.”
ꢀ Subwoofer’s size can be set only to “Large” or
“None”.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 13).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Sanskrit
Danish
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Country Code List
Enter the appropriate code number for the initial setting “Country Code” (See page 15).
Code Country
Code Country
Code Country
Code Country
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
LC
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Spain
LI
Ethiopia
LK
Sweden
Finland
LR
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
FJ
Fiji
LS
Lesotho
AL
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
LT
Lithuania
AM
AN
AO
AQ
AR
AS
AT
LU
Luxembourg
Latvia
SJ
LV
LY
Libya
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Morocco
Monaco
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Burkina Faso
Bulgaria
Bahrain
Burundi
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Benin
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
Bermuda
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Brunei Darussalam
Bolivia
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Trinidad and Tobago
Tuvalu
Belarus
HN
HR
HT
HU
ID
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
Norfolk Island
Nigeria
Belize
Taiwan
Canada
Nicaragua
Netherlands
Norway
Tanzania
Cocos (Keeling) Islands
Central African Republic
Congo
Ukraine
Uganda
IE
Nepal
United Kingdom
USA Minor Outlying
Islands
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
IL
Nauru
IN
Niue
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
EG
EH
IO
British Indian Ocean
Territory
New Zealand
Oman
US
UY
UZ
VA
VC
United States
Uruguay
IQ
Iraq
Iran
Panama
Peru
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
IR
IS
Iceland
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
IT
Italy
JM
JO
JP
KE
KG
KH
KI
Jamaica
VE
VG
VI
Jordan
Japan
Poland
Kenya
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Czech Republic
Germany
Djibouti
KM
KN
KP
KR
KW
KY
KZ
LA
LB
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
Palau
Denmark
Paraguay
Dominica
Qatar
Dominican Republic
Algeria
Reunion (French)
Romania
Ecuador
Cayman Islands
Kazakhstan
Laos
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
Zaire
Zimbabwe
Estonia
Egypt
Western Sahara
Lebanon
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
AC 230V , 50 Hz
16W
430 X 80 X 410 mm (w x h x d)
7.7 lbs (3.5 kg)
Operating temperature
Operating humidity
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
System
Laser
Signal system
Frequency response
Semiconductor laser, wavelength 650 nm
NTSC
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
5 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Accessory
Video cable . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . .2
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
®
®
™
, HDCD , High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks
of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following patents: United States: 5,479,168, 5,638,074,
5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,872,531 and 5,864,311. Australia: 669114. Other patents pending.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
You can find your nearest authorized distributor or dealer on our website.
JAPAN
U.S.A.
Marantz Japan,Inc.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
1100 Maplewood Drive, ltasca, IL 60143, U.S.A.
Marantz America, Inc.
EUROPE Marantz Europe B.V.
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
345W851312
P/NO : 3834RS00???
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|