Marantz DVD Player DV6400 User Manual

Model DV6400 User Guide  
Super Audio CD/DVD Player  
CLASS 1  
LASER PRODUCT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
READ BEFORE OPERATING EQUIPMENT  
17. Power Lines – An outside antenna system should not be located in the vicinity  
of overhead power lines or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When installing an outside antenna  
system, extreme care should be taken to keep from touching such power lines  
or circuits as contact with them might be fatal.  
18. Overloading – Do not overload wall outlets, extension cords, or integral  
convenience receptacles as this can result in a risk of fire or electric shock.  
19. Object and Liquid Entry – Never push objects of any kind into this product  
through openings as they may touch dangerous voltage points or short-out  
parts that could result in a fire or electric shock.  
This product was designed and manufactured to meet strict quality and  
safety standards. There are, however, some installation and operation  
precautions which you should be particularly aware of.  
1. Read Instructions – All the safety and operating instructions should be read  
before the product is operated.  
2. Retain Instructions – The safety and operating instructions should be retained  
for future reference.  
3. Heed Warnings – All warnings on the product and in the operating instructions  
should be adhered to.  
4. Follow Instructions – All operating and use instructions should be followed.  
Never spill liquid of any kind on the product.  
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not  
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
20. Servicing – Do not attempt to service this product yourself as opening  
or removing covers may expose you to dangerous voltage or other hazards.  
Refer all servicing to qualified service personnel.  
21. Damage Requiring Service – Unplug this product from the wall outlet and  
refer servicing to qualified service personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
6. Attachments – Do not use attachments not recommended by the product  
manufacturer as they may cause hazards.  
7. Water and Moisture – Do not u se this product near water-for example, near  
a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near  
a swimming pool, and the like.  
8. Accessories – Do not place this product on an unstable cart, stand, tripod,  
bracket, or table. The product may fall, causing serious injury to a child or  
adult, and serious damage to the product. Use only with a cart, stand, tripod,  
bracket, or table recommended by the manufacturer, or sold with the product.  
Any mounting of the product should follow the manufacturer’s instructions,  
and should use a mounting accessory recommended by the manufacturer.  
b. If liquid has been spilled, or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as  
an improper adjustment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore the product to its  
normal operation.  
e. If the product has been dropped or damaged in any way, and  
9. CART – A product and cart combination should be  
moved with care. Quick stops, excessive force, and  
f.  
When the product exhibits a distinct change in performance – this indicates  
a need for service.  
uneven surfaces may cause the product and cart  
22. Replacement Parts - When replacement parts are required, be sure the  
service technician has used replacement parts specified by the manufacturer  
or have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
23. Safety Check – Upon completion of any service or repairs to this product,  
ask the service technician to perform safety checks to determine that the  
product is in proper operating condition.  
combination to overturn.  
10. Ventilation – Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable  
operation of the product and toprotect it from overheating,  
andthese openings must not beblocked or covered. The openings should never  
be blocked byplacing the product on a bed, sofa, rug, or other similar surface.  
This product should not be placed in a built-in installation such asa bookcase  
or rack unless proper ventilation is provided or themanufacturer’s instructions  
have been adhered to.  
24. Wall or Ceiling Mounting – The product should be mounted to a wall or  
ceiling only as recommended by the manufacturer.  
11. Power Sources – This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of the type of power  
supply to your home, consult your product dealer or local power company. For  
products intended to operate from battery power, or other sources, refer to the  
operating instructions.  
25. Heat – The product should be situated away from heat sources such as  
radiators, heat registers, stoves, or other products (including amplifiers)  
that produce heat.  
12. Grounding or Polarization – This  
product may be equipped with a  
polarized alternating-current line  
FIGURE 1  
AC POLARIZED PLUG  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
plug (a plug having one blade  
wider than the other). This plug will fit into the power outlet only one way. This  
is a safety feature. If you are unable to insert theplug fully into the outlet, try  
reversing the plug. If the plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the safety purpose of the polarized  
plug.  
ANTENNA  
LEAD IN  
WIRE  
13. Power-Cord Protection – Power-supply cords should be routed so that they are  
not likely to be walked on or pinched by items placed upon or against them,  
paying particular attention to cords at plugs, convenience receptacles, and the  
point where they exit from the product.  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
Protective Attachment Plug – The product is equipped with an attachment plug  
having overload protection. This is a safety feature. See Instruction Manual for  
replacement or resetting of protective device. If replacement of the plug is  
required, be sure the service technician has used a replacement plug specified by  
the manufacturer that has the same overload protection as the original plug.  
14.  
ELECTRIC  
SERVICE  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
Outdoor Antenna Grounding – If an outside antenna or cable system is connected  
to the product, be sure the antenna or cable systemm is grounded so as to provide  
some protection against voltage surges and built-up static charges. Article 810 of  
the National Electrical Code, ANSI/NFPA 70, provides information with regard to  
proper grounding of the mast and supporting structure, grounding of the lead-in  
wire to an antenna discharge unit, size of grounding conductors, location of  
antenna-discharge unit, connection to grounding electrodes, and requirements  
for the grounding electrode. See Figure 1.  
15.  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC - NATIONAL ELECTRICAL CODE  
16. Power-Cord Protection – Power-supply cords should be routed so that they are  
not likely to be walked on or pinched by items placed upon or against them,  
paying particular attention to cords at plugs, convenience receptacles, and the  
point where they exit from the product.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la Classe B est conforme à la norme  
NMB-003 du Canada.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . 3  
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Speaker Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
PARENTAL LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . 27  
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 27  
CONTROL LEVELS. . . . . . . . . . . . . . . . . . . . . . . . . 27  
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5  
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 30  
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8  
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Tour of the remote control . . . . . . . . . . . . . . . . . . . . . . . 9  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 11  
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . 11  
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 11  
HOOK UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Description - rear panel . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connection to an audio system . . . . . . . . . . . . . . . . . . 13  
Connection to 5.1-channel Surround Sound system . . . 14  
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 15  
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
CANCELLING AND CALLING BACK  
PBC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
AUDIO-EX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
CALLING UP A MENU SCREEN DURING  
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 17  
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 17  
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 17  
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Page Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Playing From a Desired Group. . . . . . . . . . . . . . . . . . . 18  
Playback of the Bonus Group. . . . . . . . . . . . . . . . . . . . 18  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 19  
REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Program (CD/Super Audio CD/DVD-A). . . . . . . . . . . . . 19  
Playback of All Groups. . . . . . . . . . . . . . . . . . . . . . . . . 20  
Random Playback (CD/Super Audio CD/DVD-A) . . . . . 20  
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 20  
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . 21  
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Random Playback (MP3/JPEG/WMA) . . . . . . . . . . . . . 22  
Program (MP3/JPEG/WMA). . . . . . . . . . . . . . . . . . . . . 22  
Audio Language or Sound Mode . . . . . . . . . . . . . . . . . 22  
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Changing the On-Screen Display . . . . . . . . . . . . . . . . . 23  
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The serial number of this product may be found on the back of the DVD player. No others have the  
same serial number as yours. You should record the number and other vital information here and  
retain this book as a permanent record of your purchase to aid identification in case of theft. Serial  
numbers are not kept on file.  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
About Copyright  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of  
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer-  
ing or disassembly is prohibited.  
Apparatus Claimas of U. S. Patent Nos, 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited  
viewing uses only.  
Supplied Accessories  
Please check to make sure the following items are included with the main unit in the carton.  
Remote  
Operating  
Instruction  
Warranty Card  
Audio  
Video  
cable  
“AA” (R6P)  
• • • • • • • •  
• • • •  
• • • • • •  
control  
1
• • • • • • • • •  
• • • • • • • • •  
1
for USA  
Warranty Card  
• • •  
1
cable  
1
1
• • • • • •  
batteries  
2
for Canada  
1
Symbols Used in this Manual  
The following symbols appear below in some headings and notes in this manual, with the following meanings.  
:
:
Description refers to playback of DVD-Audio discs.  
Description refers to playback of DVD-Video discs.  
Description refers to playback of Audio CDs.  
DVD-A  
DVD-V  
CD  
:
SUPER  
:
:
:
:
:
Description refers to playback of Super Audio CDs.  
Description refers to playback of discs formatted with MP3.  
Description refers to playback of Video CDs.  
AUDIO CD  
MP3  
VCD  
Description refers to viewing of JPEG discs.  
JPEG  
WMA  
Description refers to playback of discs formatted with WMA.  
Description refers to the items to be set in the QUICK mode.  
:
QUICK  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT THE DISCS  
Playable Discs  
The following discs can be played back on this  
DVD player.  
Disc Types  
]
[
DVD-Audio  
DVD-Audios are divided into several large sections called  
“groups” and smaller sections called “tracks.Numbers are  
alloted to these sections. These numbers are called “group  
numbers” and “track numbers.”  
Usable  
discs  
Recorded  
signals  
Mark (logo)  
Disc Size  
Example  
Group 1  
Group 2  
DVD-Audio  
Track 1  
Track 2  
Track 3  
Track 4  
Track 1  
Track 2  
12 cm  
DVD-Video  
(NOTE 1)  
Digital video  
(MPEG2)  
DVD-R  
DVD-RW  
(NOTE 2)  
8 cm  
[
]
DVD-Video  
Data on a DVD is divided into sections called "titles," and  
then into subsections called "chapters," each of which is  
given a title or chapter number. Playback conditions are  
preset on some DVD-Video discs, and these playback  
conditions take priority over user operations on this player.  
If a function you selected does not run as desired, refer to  
Digital audio  
MP3  
WMA (NOTE 4)  
Digital picture  
(JPEG)  
12 cm  
8 cm  
CD  
CD-R  
CD-RW  
(NOTE 3)  
the manual accompanying the disc  
.
Super Audio  
CD  
Digital audio  
12 cm  
12 cm  
Example  
Title 1  
Title 2  
Sound  
and  
Pictures  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2  
Video  
CD  
DIGITAL VIDEO  
8 cm  
(Singles)  
[
]
Audio CD, Video CD, Super Audio CD  
Picture CD  
JPEG  
12 cm  
Data on an Audio CD, a Super Audio CD, or a Video CD is  
divided into sections called “tracks,each of which is given a  
track number.  
NOTE 1: Some DVD-Video discs do not operate as described in this  
manual due to the intentions of the discs’ producers.  
NOTE 2: Playing DVD-R and DVD-RW discs  
Example  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
Track 6  
DVD-R and DVD-RW discs on a DVD recorder can be played.  
Discs that have not be finalized cannot be played.  
Depending on the disc’s recording status, the disc may not be  
accepted or may not be played normally (the picture or sound  
may be not be smooth, etc.).  
NOTE 3: Some of CD-R/CD-RW discs may be incompartible because  
of “scratch and stain of disc”, “Recording condition”, and  
“Characteristic of Recorder”.  
NOTE 4:  
Windows Media and the Windows logo are  
trademarks or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
ABOUT THE PBC FUNCTION OF VIDEO CD  
This unit conforms to ver.1.1 and ver.2.0 of Video CD stan-  
dard, with PBC function.  
Ver.1.1 (without PBC function): You can enjoy playback picture  
This player conforms to the NTSC color system. You as well as music CD.  
cannot play discs recorded in other color systems such  
as PAL.  
Ver.2.0 (with PBC function): While using a Video CD with PBC  
function, “PBC” appears on the screen and the display.  
¡Some discs include region codes as shown below.  
What is PBC? “PBC” stands for the Playback Control.You  
can play interactive software using menu screens. Refer to  
instructions in the Video CD.  
NOTE:  
When playing Video CDs with PBC function, some operations  
(e.g., select and repeat tracks) cannot be performed unless the  
function is cancelled temporarily (refer to page 16).  
¡The number inside the symbol refers to a region of  
the world, and a disc encoded in a specific region for-  
mat can only be played back on DVD players with the  
same region code.  
[
]
MP3, JPEG, WMA  
The following discs cannot be played back on this  
DVD player.  
Data on a MP3 is divided into sections called "groups," and  
then into subsections called "tracks," each of which is given an  
album or track number.  
¡DVD with region codes other than 1 or ALL.  
¡DVD-ROM  
Example  
¡DVD-RAM (Never play back, otherwise malfunc-  
tion may result.)  
Group 1  
Group 2  
Track 1  
Track 2  
Track 3  
Track 4  
Track 1  
Track 2  
¡CD-ROM  
¡VSD  
¡CDV (Only plays back the audio part.)  
¡CD-G (Only plays back the sound.)  
¡CD-R/CD-RW (Only plays back the discs which  
Audio CD/MP3/JPEG/WMA is recorded.)  
¡CD-I (Never play back, otherwise malfunction may  
result.)  
CAUTION:  
¡
Use caution not to pinch your finger in the disc slot.  
¡Photo CD (Never play back, otherwise malfunc-  
tion may result.)  
¡Be sure to remove a disc and unplug the AC power cord  
from the outlet before carrying the DVD player.  
Any other discs without compatibility indications.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
¡Analog 5.1-channel Dolby and DTS surround out- ¡Search  
put  
Group search: Search for the group designated by  
This player is equipped with analog 5.1-channel  
Dolby and DTS surround audio out jacks for play-  
back.  
user is possible.  
Page search: Search for the page designated by  
user is possible.  
Chapter search:Search for the chapter designated by  
user is possible.  
¡Progressive Scan system  
Unlike conventional interlace scanning, the progres-  
sive scan system provides less flickering and images  
in higher resolution than that of traditional television  
signals.  
Title search: Search for the title designated by user  
is possible.  
Track search: Search for the track designated by  
user is possible.  
¡Still/fast/slow/step playback  
Time search: Search for the time designated by  
user is possible.  
Various playback modes are available including still  
pictures, fast forward/reverse, slow motion and step  
frames.  
¡Repeat  
Chapter:  
Repeated playback of the chapter of  
the disc being played is possible.  
Repeated playback of the title of the  
disc being played is possible.  
Repeated playback of the track of the  
disc being played is possible.  
Repeated playback is possible.  
(exclude DVD-Video)  
¡Random playback for Audio CD, MP3, Super  
Audio CD, JPEG, DVD-Audio, and WMA  
This player can shuffle the order of tracks to play  
them in random order.  
¡Program playback for Audio CD, MP3, Super  
Audio CD, JPEG, DVD-Audio, and WMA  
You can program the order of tracks to play them in  
any desired order.  
¡DVD menus in a desired language  
You can display DVD menus in a desired language, if  
available on a DVD.  
¡Auto standby  
When the screen saver program is activated for 35  
minutes, the power is automatically turned off.  
¡Subtitles in a desired language  
You can select a desired language for the display  
subtitles, if that language is available on a disc.  
¡Selecting a camera angle  
You can select the desired camera angle, if a disc  
contains sequences recorded from different angles.  
¡Choices for audio language and sound mode  
You can select the desired audio language and  
sound mode, if different languages and modes are  
available on a disc.  
¡Parental lock  
You can set the control level to limit playback of discs  
which may not be suitable for children.  
Title:  
Track:  
ALL:  
A-B:  
The part between A and B designated  
by user is possible.  
Group:  
Repeated playback of the folder of  
the MP3/JPEG/WMA/DVD-Audio disc  
being played is possible.  
¡Zoom  
2-time or 4-time magnified screen can be displayed.  
¡Marker  
The part designated by user can be called back.  
¡Resume Play  
User can resume to playback from the part at which  
the play was stopped even if the power turn off.  
¡Component Video Out Jacks  
Jacks located on the back of the DVD Player which  
are used to send high-quality video to a TV via  
Component Video In Jacks.  
¡Bit rate indication  
¡DRC (Dynamic range control)  
You can control the range of sound volume.  
¡Automatic detection of discs  
¡Displaying a JPEG picture  
This player automatically detects if a loaded disc is  
DVD-Video, DVD-Audio, Super Audio CD, Audio CD,  
MP3, JPEG, or WMA.  
Kodak Picture CDs can be played. Still images stored  
in JPEG format on CD-R/RW can also be played.  
¡Reproducing WMA data  
You can enjoy WMA files which are recorded on  
CD-R/RW.  
¡Playing an MP3 disc  
You can enjoy MP3 files which are recorded on CD-  
R/RW.  
¡Direct Search  
You can search the desired title, chapter, and track  
with numeric button during playback or in stop mode.  
¡On-screen display  
Information about the current operation can be dis-  
played on a TV screen, allowing you to confirm the  
currently active functions (such as program play-  
back), on the TV screen using the remote control.  
¡AUDIO-EX Mode  
You can enjoy higher quality audio by stopping the  
video signal and display.  
“Kodak Picture CD COMPATIBLE” is trademark of  
Eastman Kodak Company.  
“WMA” (Windows Media Audio) is a new audio  
codec developed by Microsoft® in the United  
States of America.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
FRONT PANEL  
3
1
2
5
6 7  
4
AUDIO  
EX.  
11  
13  
14  
32 31  
30  
10 8  
12  
REMOTE CONTROL  
1. POWER Button [page 16]  
2. Disc loading tray  
3. PLAY Button [page 16]  
4. STOP Button [page 16]  
5. PAUSE Button [page 16]  
21  
12  
26  
1
27  
24  
19  
16  
15  
6. Cursor Buttons [page 16]  
Use when making settings while watching the display on  
a TV screen.  
7. MENU Button [page 16]  
8. ENTER Button [page 16]  
9. SETUP Button [page 25]  
10. G (SKIP UP/FWD) Button [page 18]  
Plays back from the beginning of the next chapter or  
track. Hold down to fast forward playback.  
11. H (SKIP DOWN/REV) Button [page 18]  
Plays back from the beginning of the current chapter or  
track. Hold down to fast reverse playback.  
12. OPEN/CLOSE Button [page 16]  
13. AUDIO EX. Button [page 16]  
28  
10  
18  
5
22  
3
11  
23  
4
14. Display, Remote Sensor Window  
15. A-B REPEAT Button [page 19]  
16. REPEAT Button [page 19]  
7
9
29  
6
17. ZOOM Button [page 17]  
18. CLEAR Button [page 18]  
19. ANGLE Button [page 23]  
Press to change the camera angle to see the sequence  
being played back from a different angle.  
20. RETURN Button [page 16]  
17  
25  
20  
8
21. SEARCH MODE Button [page 18]  
22. h (FR SEARCH) Button [page 17]  
23. g (FF SEARCH) Button [page 17]  
24. SUBTITLE Button [page 23]  
Press to select a desired subtitle language.  
25. TOP MENU Button [page 16]  
26. DISPLAY Button [page 21]  
27. AUDIO Button [page 22]  
Press to select a desired audio language or sound mode.  
28. Numeric Buttons [page 18]  
29. MODE Button [page 19]  
30. AUDIO EX. Indicator  
This indicator lights when the AUDIO EX. button is ON.  
31. SUPER AUDIO CD Indicator  
The buttons with circled numbers can only be  
operated with the remote control.  
This indicator lights when playing a Super Audio CD.  
32. STANDBY Indicator  
This indicator lights when the DVD player turns off.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Tour of the remote control  
Buttons on remote control work in different ways for DVD, VCD, and CD :  
Refer to the following table for correct use.  
DVD  
VCD  
CD  
POWER  
Press this to switch the power Press this to switch the power  
Press this to switch the power  
between on and standby.  
between on and standby.  
between on and standby.  
A-B REPEAT Button  
REPEAT Button  
Marks a segment to repeat  
between A and B.  
Marks a segment to repeat  
between A and B.  
Marks a segment to repeat  
between A and B.  
Allows you to repeat play a  
Group (For DVD-Audio), Title,  
or Chapter.  
Allows you to repeat play a  
Track or Disc.  
Allows you to repeat play a  
Track or Disc.  
Allows you to program a specific  
order or random playback.  
To set black level on/off.  
To activate the 3D sound  
(Virtual surround system).  
MODE Button  
To set black level on/off.  
To activate the 3D sound (Virtual  
surround system).  
To activate the 3D sound  
(virtual surround system).  
ZOOM Button  
ANGLE Button  
To magnify part of picture  
(x2).  
To magnify part of picture  
(x2/x4).  
Accesses various camera angles  
on a disc.  
SUBTITLE Button  
AUDIO Button  
Accesses various subtitles on  
a disc.  
To select STEREO, L-CH or R-CH.  
Accesses various audio functions  
on a disc.  
To select STEREO, L-CH or R-CH.  
Displays the current disc mode.  
DISPLAY Button  
Displays the current disc  
mode.  
Displays the current disc mode.  
SEARCH MODE Button  
To search track or time.  
To rapidly return to a location  
of disc.  
To search chapter, title, or time.  
To rapidly return to a location  
of disc.  
To search track or time.  
To rapidly return to a location  
of disc.  
OPEN/CLOSE Button  
NUMERIC Buttons  
To open or close the disc tray.  
To open or close the disc tray.  
To open or close the disc tray.  
To select track directly.  
To select chapter directly.  
To select track directly.  
CLEAR Button  
Clear the markers.  
Removes status No. in  
program input.  
Clear the markers.  
Clear the markers.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Tour of the remote control  
DVD  
Brings up the Menu on a disc.  
VCD  
CD  
MENU Button  
TOP MENU Button  
Brings up the Top Menu on a disc.  
ENTER, CURSOR Buttons  
Moves the cursor and determines  
its position.  
Moves the cursor and determines  
its position.  
Moves the cursor and determines  
its position.  
RETURN Button  
Returns to a previous menu.  
Returns to a previous menu.  
SETUP Button  
SKIP Buttons  
Brings up the DVD player’s Setup menu.  
Brings up the DVD player’s Setup menu.  
Brings up the DVD player’s Setup menu.  
To skip Chapters  
To skip Tracks (For DVD-Audio).  
To skip Tracks.  
To skip Tracks.  
SEARCH Buttons  
Allows you to search forward/backward  
through a disc (x2. x8. x30).  
Allows you to search forward/backward  
through a disc (x2. x8. x50. x100).  
Allows you to search forward/backward  
through a disc (x16).  
STOP Button  
PLAY Button  
PAUSE Button  
To stop playback.  
To stop playback.  
To stop playback.  
Begin disc play.  
Pause disc play.  
Begin disc play.  
Begin disc play.  
Pause disc play.  
Advances playback one frame at a time.  
Pause disc play.  
Advances playback one frame at a time.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
Display  
Stays on when repeat chapter function is on.  
Stays on when repeat track function is on.  
Stays on when repeat  
title function is on.  
Stays on when  
the repeat function is on.  
Lights up when a DVD is  
inserted into the tray.  
Stays on when  
the A-B repeat  
function is on.  
CD:  
Lights up when a CD is inserted  
into the tray. (The SUPER AUDIO CD  
Indicator also lights up when playing a  
Stays on when the inserted  
disc is being played back.  
Lights up when a  
playback control  
is activated.  
Super Audio CD.)  
VCD:  
Lights up when the  
inserted disc comes  
to a pause.  
Lights up when a Video CD is  
inserted into the tray.  
Displays how long a current title or track has been  
played back. When a chapter or track has switched,  
the number of a new title, chapter or track is displayed.  
Displays During Operation  
Power on  
Loading the Batteries  
1. Open the battery compartment cover.  
No disc inserted  
Tray open  
2. Insert two “AA” (R6P) batteries, with each  
one oriented correctly.  
Tray closed  
3. Close the cover.  
Loading the Disc  
Power off  
NOTES  
• Do not mix alkaline and manganese batteries.  
• Do not mix old and new batteries.  
Using the remote control  
Cautions On Batteries  
• Use “AA” (R6P) batteries in this remote control unit.  
• Replace the batteries with new ones approximately  
once a year, though this depends on the frequency  
with which the remote control unit is used.  
• If the remote control unit does not operate from  
close to the main unit, replace the batteries with  
new ones, even if less then a year has passed.  
• The included battery is only for verifying operation.  
Replace it with a new battery as soon as possible.  
• When inserting the batteries, be careful to do so in  
Keep in mind the following when using the remote  
control:  
• Make sure that there is no obstacle between the  
remote and the remote sensor on the unit.  
• Use within the operating range and angle, as shown.  
the proper direction, following the  
and  
marks  
in the remote control unit’s battery compartment.  
To prevent damage or battery fluid leakage:  
• Do not use a new battery with an old one.  
• Do not use two different types of batteries.  
• Do not short-circuit, disassemble, heat or dispose  
of batteries in flames.  
• Remove the batteries when not planning to use the  
remote control unit for a long period of time.  
• If the batteries should leak, carefully wipe off the  
fluid from the inside of the battery compartment,  
then insert new batteries.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOK UPS  
Description - rear panel  
2
1
3
4
5
6
7
1. DIGITAL OUT JACKS  
Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).  
2. 2ch AUDIO OUT JACKS  
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.  
(The sound of Super Audio CD discs is not output.)  
3. VIDEO OUT JACK  
Use a video cable to connect one of the jack to Video input on your A/V-compatible TV or wide screen TV, Stereo system.  
4. COMPONENT VIDEO OUT JACKS  
B
B
R
R
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C /P , C /P and Y video. Along  
with S-Video, Component Video provides the best picture quality.  
5. S-VIDEO OUT JACK  
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher  
quality picture.  
6. PROGRESSIVE switch  
7. 5.1ch AUDIO OUT JACKS  
Use the speaker cables to connect these jacks to the 5.1ch AUDIO IN jacks on your AV amplifier with 5.1-channel input  
terminals.  
Selecting Progressive Scan (480p or Interlaced 480i) Playback  
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD  
player and set the Progressive switch on the back of the DVD player to “PROGRESSIVE”. Next, set your TV to the progres-  
sive scan mode.  
If your TV is not compatible with progressive scan, keep the Progressive switch to “INTERLACE”.  
¡Use a commercially available adaptor if the video input jacks of your TVs or monitors are the BNC type.  
What is Progressive Scanning?  
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution  
than that of traditional (480i) television signals.  
NOTE  
• When the Progressive switch is set to "PROGRESSIVE", no video signal will be output from the VIDEO OUT or S-VIDEO  
OUT jack.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks  
of Dolby Laboratories.  
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,  
5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital  
Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital  
Theater Systems, Inc. All Rights Reserved.  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOK UPS  
The following show examples of connections commonly used to connect the DVD player either TV and other  
components.  
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the  
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT  
jacks. 5.1 channel Dolby Digital Surround sound and DTS sound can also be output from the 5.1 CH OUTPUT  
jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic  
ambience with powerful and high-quality surround sound of a professional standard, which can be heard in  
movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections. Use audio  
cables (commercially available ) for the 5.1 CH audio connection.  
Notes  
¡Be sure to turn off the power to all components in the system before connecting another component.  
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the  
DVD player.  
Connection to an audio system  
Method 1  
Method 2  
Dolby Digital decoder  
or  
Stereo system  
DTS decoder  
Digital Audio Input  
Jacks  
Audio Input Jacks  
AUDIO  
Analog Audio Out  
Digital Audio Out  
DVD  
• Method 1 DVD Player + Stereo system  
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder  
NOTES  
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup  
mode. (See page 26)  
• If output DTS audio, connect to a DTS decoder, and set DTS to “DTS” for audio output in the setup mode. (See page 26)  
Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital to “OFF”, or DTS to “PCM” for audio output in  
the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.  
(See page 26)  
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or  
DAT deck.  
Set Dolby Digital “OFF” and set DTS to “PCM” for audio output in the setup mode for method 1 only. Playing a DVD using incor-  
rect settings may generate noise distortion, and may also damage the speakers. (Refer to page 26 to set Dolby Digital “ON”  
and to set DTS to “DTS”)  
Super Audio CD sound is not output from the 2ch AUDIO OUT jacks.  
Super Audio CD sound is not output as digital sound.  
Optical cable (not supplied)  
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-  
ter of 15 cm or more when storing them.  
• Use a cable which is 3m or shorter.  
• Insert cable plugs firmly into the connectors when making connections.  
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOK UPS  
Connection to 5.1-channel Surround Sound system  
Analog 5.1-channel audio signals can be output from the DVD player.  
The multichannel audio signals recorded in packed PCM can be played when an AV amplifier equipped with  
analog 5.1-channel audio inputs is connected.  
Center speaker  
Method 1  
Front speaker  
(left)  
Front speaker  
(right)  
Subwoofer  
Surround  
speaker  
(right)  
Surround  
speaker  
(left)  
AV amplifier  
with  
5.1-channel input terminals  
AUDIO  
To 5.1ch Audio IN  
Jacks  
DVD  
5.1ch Audio OUT  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOK UPS  
Connection to a TV (for video)  
Method 1  
Method 2  
Method 3  
Basic Audio  
Good picture  
Better picture  
Best picture  
COMPONENT  
VIDEO IN  
R
L
VIDEO IN  
S-VIDEO IN  
CR  
Y
CB  
TV  
PR  
Y
PB  
Audio cable  
Video cable  
S-Video  
cable  
Component Video  
cable  
DVD  
Analog Audio out  
Video out  
S-Video out  
Component Video out  
• Method 1 DVD Player + TV with Video Input Jack  
• Method 2 DVD Player + TV with S-Video Input Jack  
• Method 3 DVD Player + TV with Component Video Jacks  
NOTES  
If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD  
player. Refer to page 12.  
Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the  
copy protection system.  
S-Video output connector  
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.  
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output con-  
nector using a commercially available S-Video connection cord.  
Super Audio CD sound is not output from the 2ch AUDIO OUT jacks.  
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS  
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD  
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ-  
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and  
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi-  
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.  
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that  
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator  
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna  
terminal as described above.  
NOTE  
The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal  
through an RF Modulator.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Basic Playback  
NOTES:  
• In SETUP menu, the AUDIO-EX mode is not available.  
SUPER  
AUDIO CD  
The AUDIO-EX mode will be released when you press  
the buttons listed below.  
DVD-A DVD-V VCD  
CD  
Getting started  
OPEN/CLOSE button (on both the remote and the front  
panel), SETUP, POWER or DISPLAY button (on the  
remote), ON/STANDBY or AUDIO EX. button (on the  
front panel).  
Turn on the power of the TV, amplifier and any other com-  
ponents which are connected to the DVD.  
Make sure the TV and audio receiver (commercially avail-  
able) are set to the correct channel.  
AUDIO EX. button does not function during displaying  
SETUP menu.  
1
2
3
Press the POWER button.  
• “P-ON” will appear briefly on the display panel.  
Press the OPEN/CLOSE button to open disc load-  
ing tray.  
Pause  
Place the disc in the tray, with the  
label facing up.  
DVD-A DVD-V VCD  
CD  
SUPER  
MP3 WMA  
AUDIO CD  
1
2
During playback, press the  
PAUSE button.  
F
4
Press the PLAY button.  
• Playback will pause and sound  
will be muted.  
To continue playback, press the  
PLAY button.  
• The tray will close automatically, and playback will then  
start from the first chapter or track of the disc. If the  
playback does not start automatically, press the PLAY  
button.  
• When you playback the DVD with a title menu, it may  
appear on the screen. In this case, refer to “TITLE  
MENU”.  
5
Press the STOP button to stop playback.  
Disc Menus  
NOTES:  
• A “prohibited icon” may appear at  
DVD-V  
the top-right on the TV screen  
1
Press the MENU button.  
during operation, warning that a  
prohibited operation has been  
• The DVD main menu will appear.  
If the feature is not available,  
appear on the TV screen.  
If disc menu is available on the disc, audio lan-  
guage, subtitle options, chapters for the title and  
other options will appear for selection.  
Press the cursor buttons ( L / K / B / s ) to select  
an item, and the ENTER button to confirm selec-  
tion.  
encountered by the DVD player or  
2
3
symbol may  
the disc.  
• With DVDs that use some titles  
for playback program signals, playback may start from  
the second title, or it may skip these titles.  
• During the playback of two layered disc, pictures may  
stop for a moment. This happens when the 1st layer  
switches to the 2nd layer. This is not a malfunction.  
• The operation may vary when you playback DVDs with  
disc menu or Video CDs with PBC. Refer to the manual  
accompanying the disc for details.  
4
Title Menu  
CANCELLING AND CALLING BACK PBC FUNCTION  
DVD-A DVD-V  
Press the TOP MENU button.  
VCD  
1
1
2
3
Insert a Video CD.  
• The title menu will appear.  
If the feature is not available,  
appear on the TV screen.  
Press the STOP button.  
2
3
symbol may  
Press the numeric buttons to enter the desired  
Track number.  
Press the cursor buttons ( L / K / B / s ) to select  
an item, and the ENTER button to confirm selec-  
tion.  
• PBC function is now cancelled and the playback of the  
Video CD will start.  
4
To call back PBC function, press the STOP button  
twice, and then press the PLAY button.  
• Title menu will appear on the display.  
• Playback will begin at the selected Title.  
VCD  
1
2
When playing a Video CD with PBC func-  
tion, the title menu will appear automatically.  
Press the numeric buttons to select the desired  
title.  
General Features  
DVD may contain menus to navigate the disc and access spe-  
cial features. Press the appropriate numerical key or use the  
cursor buttons ( L / K / B / s ) to highlight your selection in  
the DVD main menu and press the ENTER button to confirm.  
NOTE:  
• Playback will begin at the selected title.  
Press the RETURN button to go back to the title  
menu.  
3
• Unless stated, all operations described are based on  
remote control use. Some operations can be carried  
out using the menu bar on the TV screen.  
CALLING UP A MENU SCREEN DURING PLAYBACK  
DVD-V  
AUDIO-EX Mode  
Press the MENU button to call up the DVD main menu.  
Press the TOP MENU button to call up the title menu.  
1
Press the AUDIO EX. button on the front panel to  
output analog audio signals only (No video signal will  
be output, and the display will be turned off.).  
NOTE:  
• Contents of menus and corresponding menu opera-  
tions may vary between discs. Refer to the manual  
accompanying the disc for details.  
The AUDIO EX. indicator will light up.  
The higher quality sound will be achieved.  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Step by Step Playback  
Slow Forward / Slow Reverse  
DVD-A  
DVD-A  
Only Moving  
DVD-V VCD  
Only Moving  
Picture  
DVD-V VCD  
Picture  
1
2
During playback, press the  
1
During playback, press the  
PAUSE button.  
• Playback will pause and sound  
will be muted.  
F
PAUSE button.  
Press the g or h button.  
Slow motion playback will begin  
and sound will be muted.  
D
Button  
1/16  
1/8  
3
Press the g or h button  
repeatedly to select the  
required speed: 1/16, 1/8, 1/2  
2
3
The disc advances by one frame each time the  
PAUSE button is pressed.  
To exit step by step playback, press the PLAY but-  
ton.  
of the normal playback.  
• If you are using g/G or  
H/E on the front panel, press  
and hold it for more than 1.5 sec  
(the longer you hold it, the faster  
the speed will be). When you  
reach the desired speed,  
1/2  
Resume  
release the button.  
SUPER  
AUDIO CD  
4
To return to normal playback, press the PLAY button.  
DVD-A DVD-V  
CD  
VCD  
NOTE:  
• Only Slow Forward is available when playing Video CD.  
Forward speed can be selected from 1/16, 1/8, or 1/2.  
1
2
During playback, press the  
STOP button.  
Resume ON  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
• Resume message will appear on  
the TV screen.  
Zoom  
DVD-V VCD  
The Zoom function allows you to enlarge  
Press the PLAY button, playback will resume from  
the point at which playback was stopped.  
the video image and to pan through the enlarged image.  
1
Press the ZOOM button during playback.  
• Playback will continue.  
To cancel resume, press the STOP button twice.  
NOTES:  
2
Press the ZOOM button repeatedly to select the  
• The resume playback takes a little longer to take place  
required zoom factor: x2, x4 or OFF.  
• Only x2 zoom is available on Video CDs.  
compared to the normal playback.  
• Some Video CDs with PBC function resume playback  
from the beginning of the track.  
• The resume information stays on even when the power  
is switched off.  
x2  
x4  
Fast Forward / Reverse Search  
SUPER  
AUDIO CD  
DVD-A DVD-V VCD  
CD  
MP3 WMA  
3
Use the cursor buttons ( L / K / B / s ) to move  
the zoomed picture across the screen.  
1
During playback, press the g or h button  
repeatedly to select the required forward or reverse  
speed: x2, x8, x50, x100.  
• If you are using g/G or H/E on the front panel,  
press and hold it for more than 1.5 sec (the longer you  
hold it, the faster the speed will be). When you reach  
the desired speed, release the button.  
2
8
50  
100  
• For Video CDs, the playback speed is x2, x8 or x30.  
• For Audio CDs, the speed is fixed at x16.  
• For Super Audio CDs, the speed is fixed at x16.  
• For MP3 and WMA the speed is fixed at x8.  
To return to normal playback, press the PLAY but-  
ton.  
4
To exit zoom mode, press the ZOOM button to  
2
OFF.  
NOTES:  
• Zooming function does not work while disc menu is  
shown.  
• x4 zoom is not available on some discs.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Track  
Page Selection  
SUPER  
DVD-A CD  
VCD  
DVD-A  
AUDIO CD  
Some DVD Audio discs that include still images are provided  
with a selection of images you can choose from.  
MP3 WMA  
There are three ways to begin playback  
1
Press the MODE button 3 times  
1/12  
on a DVD-Audio, Audio CD, Super Audio CD, Video CD, MP3  
or WMA disc at a specific Track.  
during playback.  
By using the Numeric buttons  
(Except for DVD-Audio)  
2
3
Press the ENTER button.  
1
Press the numeric buttons to enter the desired  
Track number.  
• Playback will start at the selected track.  
• It is in the ready state for you to enter the page number.  
Press the numeric buttons to select the image of  
your choice.  
• For single digit tracks (1-9), press a single number (eg.  
track 3, press 3).  
NOTE:  
To play track 26, press +10, 2, 6 on the numerical button.  
• Press the MODE button twice when 5.1CH is selected as  
the audio channel in the audio setting of the setup menu.  
By using the SEARCH MODE button  
(DVD-Audio/Audio CD/Super Audio CD/Video CD)  
Playing From a Desired Group  
1
Press the SEARCH MODE button.  
__/ 15  
DVD-A  
• The track search display appears.  
1
2
During playback or in stop mode,  
press the SEARCH MODE but-  
ton twice.  
Press the numeric buttons to  
select a group.  
• The Group will be located and  
playback will start.  
1/12  
2
Within 30 seconds, select a desired track number using  
the numeric buttons. For single digits press “0” first.  
• Playback will start at the selected track.  
NOTE:  
Playback of the Bonus Group  
DVD-A  
• Playback must first be stopped (in resume mode) when  
selecting tracks from DVD-Audio discs.  
By using the SKIP buttons  
H
G
Some discs are recorded with Bonus Group that can be play-  
backed by entering a password. Refer to the disc jackets.  
1
During playback, press the  
G button to move to the next  
SKIP  
track. Press it repeatedly to skip subsequent tracks. Press the  
H button to go back to the beginning of the current track.  
In stop mode, press the SEARCH MODE button to  
open the group search screen.  
SKIP  
Press it repeatedly to go to the previous tracks  
Track number will appear briefly on the DVD display panel.  
2
.
Press the numeric buttons to  
DVD-AUDIO  
select a bonus group number.  
BONUS GROUP  
4-digit password.  
• If any SKIP button is pressed while the playback is  
paused, the playback will be paused again after skip-  
ping to the next track.  
• The password popup window  
appears.  
Please enter  
a
NOTE:  
• The SKIP  
H
G buttons are not available when play-  
3
Press the numeric buttons to enter the 4-digit password.  
• When the correct password is entered, playback starts  
from the top of the bonus group.  
back is stopped.  
Title / Chapter Search  
NOTES:  
In some cases the password window is displayed on the menu  
DVD-V  
screen. Follow the instructions given on the screen.  
Once the password is entered, it can be playbacked repeatedly  
until the disc is removed from the disc tray.  
By using the SEARCH MODE buttons  
1
Press the SEARCH MODE button  
once for the Chapter search,  
twice for the Title search during  
playback.  
/2  
Time Search  
SUPER  
AUDIO CD  
DVD-A DVD-V  
CD  
VCD  
1
2
During playback, press the SEARCH MODE button  
three times (CD, Super Audio CD, VCD: twice) to  
display the Time Search on the TV screen.  
2
Enter the desired chapter/title  
number with the numeric buttons.  
Within 30 seconds, enter a  
TOTAL  
1 : 23 : 45  
:
:
desired disc time with the  
By using the SKIP buttons  
H
G
numeric buttons.  
• Playback will start at the specified  
time.  
During playback, press the  
G button to move to the next  
SKIP  
chapter. Press it repeatedly to skip subsequent chapters. Press  
the  
H button to go back to the beginning of the current  
3
SKIP  
chapter. Press it repeatedly to go to the previous chapter  
Press the CLEAR button to  
.
erase the incorrect input.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
NOTES:  
Repeat  
The A-B repeat section can only be set within the current  
title (for DVDs), or current track (for Audio CDs).  
A-B Repeat is not available with some scenes in DVD.  
To cancel the A point which was set, press the CLEAR button.  
A-B Repeat playback does not function during title, chap-  
ter, track or all repeat playback.  
The REPEAT button is available only during playback.  
REPEAT TITLE / CHAPTER  
DVD-V  
To activate the repeat function, press the  
REPEAT button during playback.  
Program  
The repeat mode changes as described below every time  
you press the button.  
SUPER  
CD  
AUDIO CD  
You may determine the order in which tracks will play.  
OFF  
CHAPTER  
TITLE  
1
In stop mode, press the MODE button.  
(repeat off)  
(current chapter repeat) (current title repeat)  
• The PROGRAM screen will appear.  
2
Press the cursor buttons  
(or ) to select a track, then  
PROGRAM  
TOTAL  
press the ENTER button.  
NOTES:  
• Press the CLEAR button to erase  
the most recently entered pro-  
gram.  
Repeat Title/Chapter is not available with some scenes.  
he REPEAT setting will be cleared when moving to other  
title or chapter.  
ENTER  
PLAY  
CLEAR  
3
Press the PLAY button to play  
the programmed tracks.  
REPEAT TRACK  
SUPER  
NOTES:  
CD  
VCD  
AUDIO CD  
While the program is being played back, the STOP button works as  
follows.  
To activate the repeat function, press the REPEAT button during  
Press the STOP button once and then the PLAY button again,  
playback will restart from the point where the STOP button  
was pressed. (Program continued)  
playback.  
The repeat mode changes as described below every time  
you press the button.  
Press the STOP button twice and then the PLAY button again,  
playback will restart from the track in the usual way. (Program  
cleared)  
OFF  
(repeat off)  
TRACK  
(current track repeat)  
ALL  
Up to 99 programs can be entered.  
(entire disc repeat)  
I
f you wish to repeat the current track in the program, press  
the REPEAT button repeatedly until  
TRACK appears dur-  
ing playback. If you wish to repeat the entire program press  
NOTES:  
the REPEAT button repeatedly until  
ALL appears during  
The REPEAT setting will be cleared when moving to other track.  
playback.  
Repeat playback does not function during A-B repeat playback.  
Repeat playback is not available when playing the Video CD  
with PBC function.  
Refer to page 22 for program playback of MP3, WMA, and  
JPEG.  
DVD-A  
DVD-A MP3 JPEG WMA  
1
2
In stop mode, press the MODE  
PROGRAM  
button twice.  
OFF  
(repeat off)  
TRACK  
GROUP  
ALL  
• The group selection screen will  
appear.  
(current track  
repeat)  
(current folder  
repeat)  
(entire disc  
repeat)  
ENTER  
PLAY  
CLEAR  
Press the cursor buttons (or ) to select a  
A-B REPEAT  
group, then press the ENTER button.  
• The track selection screen will be displayed.  
SUPER  
AUDIO CD  
DVD-A DVD-V  
CD  
VCD  
• It takes approximately five seconds until the track  
selection screen appears.  
1
Press the A-B REPEAT button  
at your  
A -  
3
4
Press the cursor buttons (or ) to select a  
track, then press the ENTER button.  
• Press the s button to go back to the group selection  
screen from the track selection screen.  
Press the PLAY button to play the programmed  
tracks.  
chosen starting point.  
A- appears briefly on the TV  
screen.  
2
3
NOTES:  
A - B  
Press the A-B REPEAT button  
again at your chosen end point.  
It may take time for all the respective track times to be displayed.  
The programmed content is retained until the power is turned  
off or the disc tray is opened.  
If eight or more tracks have been set in a program, the user  
can switch the right part of the screen with the SKIP button  
H or G.  
A-B appears briefly on the TV  
screen, and the repeat sequence  
begins.  
OFF  
To exit the sequence, press the  
A-B REPEAT button.  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Playback of All Groups  
Information on MP3, JPEG and WMA discs  
A file with an extension of “.mp3 (MP3)” is called an “MP3 file”.  
A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is  
called a “JPEG file”.  
The DVD player can run an image file conforming to the  
Exif* specification.  
* This is a file format, Exchangeable Image File format  
established by Japanese Electronic Industry Development  
Association (JEIDA).  
DVD-A  
1
2
In stop mode, press the MODE  
button.  
ALL GROUP  
DVD-AUDIO  
TOTAL 2:05:55  
ALL GROUP screen appears.  
All Group Playback  
--no indication--  
PLAY  
A file with an extension of “.wma (WMA)” is called a  
“WMA file”.  
Press the PLAY button to play.  
Files whose extension is other than “.mp3 (MP3)”, “.jpg  
(JPG)”, “.jpeg (JPEG)” and “.wma (WMA)” will not be list-  
ed in the MP3, JPEG, or WMA menu.  
Random Playback  
If the file is not recorded in MP3, JPEG or WMA format, noise  
may be produced even if the file extension is either of “.mp3  
(MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” and “.wma (WMA)”.  
SUPER  
AUDIO CD  
CD  
This shuffles the playing order of tracks instead of playback  
in the original sequence.  
1
2
In stop mode, press the MODE  
RANDOM  
CD [AUDIO]  
TOTAL 0:45:55  
When a disc with MP3,JPEG or WMA files is inserted in the  
DVD player, the track menu will appear on the TV screen,  
and number of tracks is displayed on the front panel.  
button twice.  
RANDOM screen appears  
.
RANDOM PROGRAM  
--no indication--  
PLAY  
1
Place the disc in the tray with the label facing up.  
Press the PLAY button to start  
For discs on which MP3, JPEG or WMA tracks are  
recorded:  
random playback.  
NOTES:  
If you wish to repeat the current track in the random selection,  
press the REPEAT button repeatedly until TRACK appears  
An MP3, JPEG or WMA track menu screen appears.  
A symbol of “ ” is shown on the top of the group name.  
A symbol of “ ” is shown on the top of MP3 files.  
A symbol of “ ” is shown on the top of JPEG files.  
A symbol of “ ” is shown on the top of WMA files.  
If the picture extends beyond the scope of screen, a down  
arrow “L” appears, indicating that the user can view anoth-  
er part of the picture on the next page. If an up arrow “K”  
appears, it indicates that the user can view another part  
on the previous page. The current page number and the  
number of total pages are shown on the right of the down  
arrow “L”.  
during playback. If you wish to repeat the entire random selec-  
tion press the REPEAT button repeatedly until  
ALL  
appears during playback.  
Refer to page 22 for random playback of MP3, WMA, and  
JPEG.  
DVD-A  
1
In stop mode, press the MODE  
RANDOM  
button three times.  
The group selection screen will  
appear.  
ALL  
1
2
1:02:25  
1:03:30  
The system can recognize up to 255 groups (or folders)  
and up to 256 tracks. (This applies to the case where  
mixed MP3, JPEG and WMA files are recorded.)  
If no MP3, JPEG or WMA files are found in the group, the  
group is not displayed.  
The DVD player can reproduce data recorded as per ISO  
9660 Level 1, Level 2 or Joliet on the disc.  
It can also run a disk on which data is recorded in a multi-  
session.  
For more details of recording systems, see the instruction  
manual for the CD-R / CD-RW drive or the writing software.  
PLAY  
ALL  
2
3
Press the cursor buttons (▲  
or ) to select the desired  
group to playback randomly,  
then press the ENTER button.  
RANDOM  
ALL  
TOTAL 4:04:10  
RANDOM PROGRAM  
--no indication --  
RANDOM screen will appear.  
PLAY  
Press the PLAY button  
• Random playback will start.  
Applicable MP3 file  
Remarks  
• It is prohibited to record  
MP3 sound on a digital  
device when connection is  
made digitally.  
Sampling fre- 44.1kHz  
quency  
48kHz  
MP3 / JPEG / WMA Playback  
MP3 JPEG WMA  
This DVD player can reproduce images and sounds from  
data recorded in MP3, JPEG and WMA formats on CD-R  
and CD-RW discs.  
The DVD player can also run JPEG files stored on Kodak  
picture CD.  
The user can enjoy picture images on the television set by  
reproducing picture CDs.  
• MP3 files recorded at fixed  
bit rate of 112 kbps or high-  
er are recommended.  
MPEG1  
audio layer 3  
Type  
Applicable JPEG file  
Remarks  
Upper limit:  
• A JPEG image that extends  
Size of  
image  
6300x5100 dots beyond the screen is  
Lower limit:  
32x32 dots  
reduced so that it will be  
displayed within the screen.  
* Picture CD is a service to convert a photograph taken by  
conventional film camera into digital data and write the data  
on a CD.  
For details of Picture CD, contact a shop that deals with  
developing service of Kodak Inc.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Applicable WMA file  
Remarks  
Slide Show Mode  
Those frequencies are  
applicable to WMA version 8  
only, not to WMA version 9.  
Sampling fre- 44.1kHz  
JPEG  
quency  
Bit rate  
48kHz  
You can switch to the slide show mode during playback.  
1
Press the MODE button during playback.  
• Ensure that the copyright  
function is set to off when  
preparing a WMA disc.  
• A prohibition “disable” sym-  
bol will appear if the user  
• The slide show mode screen will appear.  
48–192kbps  
• The slide show mode cannot be switched when it is  
stopped, or from the file list screen or the Picture CD  
menu screen.  
Type  
WMA version 8 attempts to run a non-repro-  
ducible file such as copy-  
2
3
Press the ENTER button.  
• The slide show mode will change.  
1 The entire image appears in one time.  
2 The image appears gradually and then disappears.  
right-protected.  
For discs of JPEG or Kodak picture CD:  
A JPEG or Kodak Picture CD menu appears.  
If all menu items cannot be displayed in the screen scope,  
a prompt symbol “G” appears at the right bottom of the  
screen, indicating that the user can view remaining items  
on the next page. If another prompt symbol “H” appears,  
it indicates that the user can view other items on the previ-  
ous page. The track number of the currently highlighted  
item and the total tracks are shown at the center bottom of  
the screen.  
If a prompt symbol “G” is shown at the right bottom, use  
the SKIP G button to view the next page. If another  
prompt symbol “H” is shown at the left bottom, use the  
SKIP H button to view the previous page.  
Press the MODE button to exit.  
On-Screen Information  
MP3 JPEG WMA  
You can check each file during playback.  
1
Press the DISPLAY button.  
TRACK 01  
• The name of the file currently in  
play will be displayed.  
It may take some time until all menu items are displayed  
on the menu screen.  
1
For JPEG, press the cursor buttons (K/L), or for  
Kodak Picture CD, press the cursor buttons (s /  
B / K / L), select a desired group or track to be  
played, then press the PLAY or ENTER button.  
<Example: MP3>  
2
Press the DISPLAY button again to show the track  
number, the elapsed time, the repeat status, and  
the playback status at the top of the screen.  
will be displayed when the  
repeat play has been selected.  
T - indicates Track repeat  
G - indicates Group (folder) repeat  
A - indicates Disc repeat  
If an MP3 or WMA file is selected, reproduction will start  
from the selected track and go to the next one in turn.  
If a JPEG or Kodak picture CD file is selected, an image  
will be reproduced from the selected track and go to the  
next one in turn.  
1/36 0:01:15  
A track is displayed for five seconds and then the next  
track is displayed.  
Every press on the cursor button B will turn the image  
clockwise by 90 degrees when an image is displayed.  
A press on the cursor button s will turn the image coun-  
terclockwise by 90 degrees.  
3
Press the DISPLAY button  
again to exit.  
• During program or random playback, each playback  
status will be displayed when you press the DISPLAY  
button. Then press the DISPLAY button again to exit.  
If a group is selected, press the cursor button K/L to  
select a desired group, then press the B, PLAY or ENTER  
button to select a track.  
If you press the PLAY or ENTER button, reproduction of  
the picture will start.  
Track Selection  
MP3 JPEG WMA  
Press the SEARCH MODE button during playback.  
• The FILE LIST will appear.  
Notes on MP3, JPEG and WMA:  
Select “FIRST PLAY” and press the PLAY button, playback  
1
2
from the top of the disc in the order of tracks and groups.  
The ninth and deeper hierarchies cannot be played.  
The name of group and track can be displayed in up to 25  
characters. Unrecognizable characters will be replaced  
with asterisks.  
Un-reproducible groups or tracks may be displayed  
depending on the recording conditions.  
If the TOP MENU button is pressed when a file list is dis-  
played, “FIRST PLAY” will be highlighted.  
Select a desired track using the cursor buttons  
(L/K/B/s).  
• Press the  
B
button when you want to go to the next  
hierarchy.  
• Press the  
s
button when you want to go back to the  
previous hierarchy.  
3
Press the PLAY button to start playing  
NOTES:  
Press the SEARCH MODE button to exit.  
Some selections may require additional time to be recog-  
nized.  
2
Press the STOP button, to stop playback.  
During play, a desired track can be directly searched. Just  
type in the TRACK number with the numeric buttons.  
If the typed TRACK number is not available, the “disable”  
symbol appears and the direct search mode is cancelled.  
Playback cannot be started from a desired time count.  
Pressing the SKIP button G or H will play the next or  
previous file.  
Notes on Kodak picture CD:  
A press on the STOP button will highlight the previously  
displayed track on the menu screen.  
Press the STOP button again or press the TOP MENU  
button, and the menu screen displays Tracks 1 to 6, where  
Track 1 is highlighted.  
The SEARCH button is not effective for Picture CD.  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Random Playback  
Audio Language or Sound Mode  
DVD-V  
MP3 JPEG WMA  
The DVD player allows you to select  
1
2
Press the MODE button twice  
RANDOM  
CD [DATA]  
a language during DVD disc (if multi language available)  
playback.  
while playback is stopped.  
RANDOM PROGRAM  
--no indication --  
1
2
Press the AUDIO button during playback.  
Press the AUDIO button repeatedly to select your  
desired language.  
PLAY  
1. ENG  
DolbyD 5.1ch 48k/3  
Press the PLAY button to play the tracks in random  
order.  
• Random play starts.  
• For a disc containing mixed MP3, JPEG and WMA  
files, random play of those files will be performed.  
2. FRE  
DolbyD 5.1ch 48k/3  
Program  
3. JPN  
DolbyD 5.1ch 48k/3  
MP3 JPEG WMA  
This feature allows you to program a MP3 disc to play in a  
desired sequence.  
1
2
3
Press the MODE button while  
PROGRAM  
MP3 COLLECTION  
-
playback is stopped.  
FOLDER  
MP3  
WMA  
JPEG  
ALBUM01  
ALBUM02  
ALBUM03  
ALBUM04  
ALBUM05  
ALBUM06  
ALBUM07  
• The PROGRAM screen will  
appear.  
Bon jour  
HELLO  
1/3  
1/1  
ENTER  
PLAY  
CLEAR  
ALBUM01  
Press the K or L button to  
select a group, then press the  
ENTER button.  
NOTES:  
PROGRAM  
ALBUM01  
FOLDER  
MP3  
WMA  
JPEG  
• The sound mode cannot be changed during playback  
of discs not recorded in double sound.  
TRACK08  
TRACK09  
TRACK10  
TRACK11  
TRACK12  
TRACK13  
TRACK14  
TRACK11  
• A track selection screen appears.  
• Pressing the AUDIO button may not work on some  
DVDs with multiple audio languages (e.g. DVDs which  
allow audio language setting on the disc menu).  
• The sound mode cannot be changed during playback  
of a Super Audio CD. (It may be possible to switch the  
sound mode when playing back discs including a CD  
area.)  
2/3  
1/1  
ENTER  
PLAY  
TRACK11  
CLEAR  
Press the K or L button to  
select a track, then press the  
ENTER, button to save it in a  
program.  
• Press the CLEAR button to  
erase the incorrect input.  
• The programmed track is dis-  
played in the right-hand screen.  
• If the entire program cannot be displayed at once on  
the screen, “L” appears to go to the next page.  
PROGRAM  
FOLDER  
ALBUM05  
MP3  
WMA  
JPEG  
TRACK48  
TRACK49  
TRACK50  
TRACK51  
TRACK52  
TRACK53  
TRACK54  
TRACK11  
TRACK81  
TRACK31  
TRACK22  
TRACK03  
DVD-A  
TRACK53  
TRACK25  
1
2
Press the AUDIO button during playback.  
Press the AUDIO button repeatedly to select your  
desired sound.  
2/3  
2/3  
ENTER  
CLEAR  
PLAY  
TRACK51  
NOTE:  
• “2. PPCM 2.0ch 96k/2” can be displayed even if there is  
no second sound. (The sound number during playback  
remains as 1.)  
• Pressing the s button will show a list of folders that  
belong to the one-level upper hierarchy than the cur-  
rently selected folder.  
4
Press the PLAY button to start programmed play-  
1.LPCM 5.1ch 96k/2  
back.  
• Programmed play starts.  
NOTES:  
2.PPCM 2.0ch 96k/2  
• Press the CLEAR button, and the last-programmed  
entry will be deleted.  
• Press the RETURN button, and the STOP screen will  
show up with the program contents in memory.  
• Press the STOP button, and then press the PLAY but-  
ton. Playback will restart from the beginning of the track  
being played previously (Program cleared).  
Stereo Sound Mode  
• The program setting will be cancelled when the power  
is turned off or the disc tray is opened.  
CD  
VCD  
• Up to 99 tracks can be set in a program.  
1
Press the AUDIO button repeatedly during play-  
back to select between STEREO, L-CH or R-CH.  
STEREO - both right and left channels are active (stereo)  
• If a disc in inserted that contains mixed MP3, JPEG  
and WMA files, program setting allows 99 tracks for  
combination of MP3, JPEG and WMA files.  
• If eight or more tracks have been set in a program, the  
user can switch the right part of the screen with the  
SKIP button H or G.  
L-CH - only left channel is active  
R-CH - only right channel is active  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
STEREO  
Camera Angle  
Both right and left channels  
are active (stereo).  
DVD-V  
L-CH  
R-CH  
Only the left channel  
is active.  
Some DVD discs contain scenes which have been shot simulta-  
neously from various angles. You can change the camera angle  
when the (  
) mark appears on the screen.  
1
Press the ANGLE button during playback.  
Only the right channel  
is active.  
• The selected angle will be displayed on the display bar  
at the top of the screen.  
2
Press the ANGLE button repeatedly to select your  
NOTES:  
desired angle  
.
If the Virtual Surround setting is ON, the sound mode will  
be fixed to STEREO, and can not be changed.  
Stereo sound mode will not be changed when playing DTS CD.  
1 / 8  
Angle 1  
Angle 2  
2 / 8  
Subtitle Language  
DVD-V  
The DVD player allows you to select  
a language for subtitle during DVD disc (if available) playback.  
8 / 8  
Angle 8  
1
2
Press the SUBTITLE button during playback.  
Press the SUBTITLE button repeatedly to select  
your desired subtitle language.  
• The selected language will be displayed on the display  
bar at the top of the screen.  
To turn off subtitles, press the SUBTITLE button  
repeatedly until OFF appears.  
Changing the On-Screen Display  
3
DVD-V  
1.ENG/6  
You can check information about the current disc by pressing  
the DISPLAY button on the remote control.  
Subtitle 1  
1
Press the DISPLAY button during  
9/49  
0:00:00 -0:00:00  
playback to show current Chapter  
.
2.FRE/6  
• The elapsed and remaining play-  
ing time of the current chapter  
will be displayed.  
Press the DISPLAY button again  
to show current Title.  
• The elapsed and remaining playing time of the current  
title will be displayed.  
Press the DISPLAY button the  
third time.  
Subtitle 2  
2
3
OFF  
OFF  
T
IIII  
NOTES:  
• The BIT RATE and the current  
repeat setting will be displayed.  
Some discs allow audio language setting/subtitle language  
setting on the disc menu. (Operation varies between discs,  
so refer to the manual accompanying the disc.)  
If the desired language is not shown after pressing the  
SUBTITLE button several times, the disc does not have subtitles  
in that language.  
If you choose a Language that has a 3-letter language  
code, the code will be displayed every time you change the  
Subtitle language setting. If you choose any other lan-  
guages, ‘---’ will be displayed instead. (Refer to page 28.)  
• If you are playing a dual layered  
disc, the layer number will also  
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is  
playing).  
Press the DISPLAY button the fourth time to remove  
the display.  
4
1
SUPER  
AUDIO CD  
CD  
VCD  
Press the DISPLAY button during playback, the  
current Track will be displayed on the TV screen.  
• The elapsed and remaining playing time of the current  
track will be displayed.  
Press the DISPLAY button again to show the Total Tracks.  
• The elapsed and remaining playing time of the disc will  
be displayed.  
Press the DISPLAY button for the third time to  
remove the display.  
2
3
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A DISC  
Black Level Setting  
DVD-A  
You can check information about the current disc by pressing  
the DISPLAY button on the remote control.  
DVD-A DVD-V VCD  
1
2
3
Press the DISPLAY button during playback to show cur-  
Adjust the Black Level Settings to make  
rent Track  
.
the black parts of the picture as bright as you preferred.  
• The elapsed and remaining playing time of the current  
track will be displayed.  
Press the DISPLAY button again to show current  
Group.  
• The elapsed and remaining playing time of the current  
1
2
Press the MODE button during playback.  
Press the ENTER button to switch ON/OFF  
.
ON (Default) : Makes the dark  
parts brighter.  
ON  
OFF : Shows the original pic-  
ture as recorded.  
group will be displayed.  
Press the DISPLAY button for  
the third time.  
3
Press the MODE or RETURN  
T
IIII  
button to exit.  
• The BIT RATE and the current  
repeat setting will be displayed.  
If you are playing a dual layered  
disc, the layer number will also  
be displayed ( L0: Layer 0 is  
playing. L1: Layer 1 is playing).  
Virtual Surround  
DVD-A DVD-V VCD  
4
Press the DISPLAY button for the fourth time to  
You can enjoy stereophonic visual  
space on your existing 2 channel  
stereo system.  
remove the display.  
Hints for the  
On-Screen Display  
1
Press the MODE button twice  
during playback  
.
C - indicates Chapter repeat  
- indicates Title or Track repeat  
T
G - indicates Group (folder) repeat  
A - indicates Disc repeat  
A B- indicates A-B repeat  
2
3
Press the ENTER button to set it 1(Natural effect),  
2(Emphasized effect) or OFF.  
Press the RETURN button to exit.  
Marker Setup Screen  
SUPER  
AUDIO CD  
DVD-A DVD-V  
CD  
VCD  
CD  
MP3 WMA  
Use markers to memorise  
your favourite places on a disc.  
1
2
Press the MODE button during playback  
Press the ENTER button to set 1(Natural effect),  
2(Emphasized effect) or OFF.  
.
1
Press the SEARCH MODE  
button four times (CD, Super  
Audio CD, VCD: three times)  
during playback.  
• The display screen and Markers  
will appear on the TV screen.  
3
Press the RETURN button to exit.  
NOTES:  
• Select Virtual Surround OFF or adjust the volume down  
if the sound is distorted.  
• When 5.1CH is selected as the audio channel in the  
audio setting of the setup menu, Virtual Surround does  
not function. Details are on page 26.  
• The Virtual Surround setting is not available for Super Audio  
CDs. (It may be possible to use the Virtual Surround setting  
when playing back discs that include a CD area.)  
2
3
Press the s or B button to select 1, 2, 3, 4, 5, 6,  
7, 8, 9, or 10 and ensure that “- : - - : - -” appears  
in the display.  
When reaches the desired point, press the ENTER  
button.  
• The Title or Track and elapsed playing time will appear  
in the TV screen.  
4
To return to the Marker later, press the SEARCH  
MODE button four times (CD, Super Audio CD,  
VCD: three times) during playback and the s or  
button to choose the desired marker, then press  
the ENTER button.  
B
NOTES:  
• Opening the disc tray or turning off the power or select  
2
AC at step  
all Markers.  
and press the ENTER button will erase  
To clear a marker, using the s or B button, position  
the cursor on to the marker number to be cleared and  
press the CLEAR button.  
You can mark up to 10 points.  
5
Press the SEARCH MODE or RETURN button to  
exit.  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD SETUP  
In Setup menu, QUICK mode and CUSTOM mode are availale. QUICK mode consists of the set-  
ting menus often needed, and you can make all settings required in CUSTOM mode.  
You can make the settings of the items with QUICK mark in QUICK mode.  
Language Setting  
Display Setting  
You can change certain aspects of the DVD display screens, on-screen  
messages and the display panel on the front of the DVD player.  
Language options are not available with some discs.  
1
2
Press the SETUP button in STOP mode.  
Press the B button to select CUSTOM, then press the  
ENTER button.  
1
2
Press the SETUP button in STOP mode.  
Press the B button to select CUSTOM, then press  
the ENTER button.  
• CUSTOM mode will appear.  
CUSTOM mode will appear.  
3
Press the s or B button to se-  
3
Press the s or B button to se-  
lect DISPLAY, then the ENTER  
button to confirm.  
lect LANGUAGE, then the EN-  
TER button to confirm.  
LANGUAGE  
AUDIO  
ENGLISH  
ENGLISH  
ENGLISH  
ENGLISH  
DISPLAY  
SUBTITLE  
DISC MENU  
PLAYER MENU  
TV ASPECT  
PANEL DISPLAY  
ANGLE ICON  
16:9 WIDE  
BRIGHT  
ON  
AUTO POWER OFF  
ON  
4
Press the K or L button to select the below items,  
4
Press the K or L button to select the below items, then  
press the ENTER button.  
then press the ENTER button.  
(Default : ENGLISH)  
AUDIO  
• Sets the audio language.  
(Default : 16:9 WIDE)  
TV ASPECT  
LANGUAGE  
AUDIO  
ORIGINAL  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
QUICK  
DISPLAY  
TV ASPECT  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
• Press the K or L button for an  
item selection, then press the EN-  
TER button.  
SWEDISH  
(Default : ENGLISH)  
SUBTITLE  
Select 4:3 LETTER BOX for a  
black bars appears on top and bottom of the screen.  
• Sets the subtitle language.  
LANGUAGE  
SUBTITLE  
• Select 4:3 PAN & SCAN for a full height picture with both  
sides trimmed.  
OFF  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
SWEDISH  
Select 16:9 WIDE if a wide-screen TV is connected to the  
DVD player.  
(Default : BRIGHT)  
PANEL DISPLAY  
(Default : ENGLISH)  
DISC MENU  
• Press the K or L button for an  
item select BRIGHT, DIMMER  
and AUTO, then press the ENTER  
button.  
• Sets the language for DVD Menu.  
DISPLAY  
PANEL DISPLAY  
LANGUAGE  
DISC MENU  
BRIGHT  
DIMMER  
AUTO  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
ITALIAN  
SWEDISH  
DUTCH  
• This adjusts the brightness of the  
display panel with the factory de-  
fault BRIGHT.  
PLAYER MENU  
When AUTO is selected, the display dims only during playback.  
(Default : ENGLISH)  
QUICK  
LANGUAGE  
PLAYER MENU  
• Sets the language for the On-  
Screen display.  
ENGLISH  
FRANCAIS  
ESPANOL  
(Default : ON)  
ANGLE ICON  
DISPLAY  
• Press the ENTER button repeat-  
edly to turn Angle mark ON or  
OFF.  
TV ASPECT  
PANEL DISPLAY  
ANGLE ICON  
16:9 WIDE  
BRIGHT  
ON  
AUTO POWER OFF  
ON  
5
Press the K or L button to select a setting, then  
press the ENTER button.  
• If OTHER is selected in the AUDIO, SUBTITLE or DISC  
MENU screen, press four-digit number to enter the code  
for the desired language. (Refer to the language code  
list on page 28).  
(Default :ON)  
AUTO POWER OFF  
DISPLAY  
• Press the ENTER button repeat-  
edly to turn Auto Power ON or  
OFF.  
TV ASPECT  
PANEL DISPLAY  
ANGLE ICON  
16:9 WIDE  
BRIGHT  
ON  
AUTO POWER OFF  
ON  
• Only the languages supported by the disc can be select-  
ed.  
• It will turn the DVD player to off au-  
tomatically after 35 minutes of no  
use.  
6
Press the SETUP button to exit.  
NOTE:  
5
Press the SETUP button to exit.  
Language Setting for Dialog and Subtitle is not available  
with some discs. Then use the AUDIO and SUBTITLE but-  
tons.  
NOTE:  
Be sure to press the SETUP button, or the setting will not work.  
Details are on pages 22 and 23.  
EN  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD SETUP  
Audio Setting  
Speaker Setting  
When 5.1CH is selected for analog out, some speaker settings  
will be required.  
Choose the appropriate Audio settings for your equipment as it  
only affect during the playback of DVD discs of the DVD player.  
1
Press the K or L button to select 5.1CH, then  
1
2
Press the SETUP button in STOP mode.  
Press the B button to select CUSTOM, then press  
the ENTER button.  
press the ENTER button.  
2
Press the K or L button to  
AUDIO  
5.1 CH  
select the below items, then  
SPEAKER SIZE  
press the ENTER button.  
• CUSTOM mode will appear.  
DELAY TIME  
BALANCE  
3
Press the s or B button to  
AUDIO  
select AUDIO, then the ENTER  
button to confirm.  
DRC  
DOLBY DIGITAL  
DTS  
DOWN SAMPLING ON  
ANALOG  
SACD  
OFF  
ON  
PCM  
2.0 CH  
MULTI-CH  
SPEAKER SIZE  
• Press the K or L button to select  
the speaker to set.  
4
Press the K or L button to select the below items,  
AUDIO  
SPEAKER SIZE  
then press the ENTER button.  
DRC (Dynamic Range Control)  
(Default : OFF)  
FRONT (L/R)  
CENTER  
SUB WOOFER  
LARGE  
LARGE  
ON  
AUDIO  
SURROUND (L/R) LARGE  
DRC  
DOLBY DIGITAL  
DTS  
DOWN SAMPLING ON  
ANALOG  
SACD  
OFF  
ON  
PCM  
To compress the range of sound  
volume.  
2.0 CH  
MULTI-CH  
• Press Enter until the desired speaker size appears.  
(Default : ON)  
DOLBY DIGITAL  
QUICK  
FRONT(L/R), CENTER, SURROUND(L/R)  
(Default: LARGE)  
LARGE: Select this when the connected speaker is capable  
of playing back sounds of 100Hz or less.  
Set to ON when the player is con-  
nected to Dolby Digital Decoder.  
ON : Output by Dolby Digital  
OFF: Convert the Dolby Digital to  
PCM  
AUDIO  
DRC  
DOLBY DIGITAL  
DTS  
DOWN SAMPLING ON  
ANALOG  
SACD  
OFF  
ON  
PCM  
SMALL: Select this when the connected speaker is not  
capable of playing back sounds of 100Hz or less.  
2.0 CH  
MULTI-CH  
OFF:  
Select this when it is not connected. (It cannot be  
set OFF on the FRONT speaker.)  
SUB WOOFER (Default: ON)  
DTS (Default : PCM)  
DTS: Output by DTS sound  
Set to DTS when the unit is  
connected to DTS Decoder.  
PCM: Convert the Dolby Digital to  
PCM  
ON:  
OFF:  
Select this when SUB WOOFER is connected.  
Select this when it is not connected.  
AUDIO  
DRC  
DOLBY DIGITAL  
DTS  
DOWN SAMPLING ON  
ANALOG  
SACD  
OFF  
ON  
PCM  
NOTES:  
• “OFF” is not available for SUB WOOFER when  
“SMALLis selected for FRONT(L/R).  
2.0 CH  
MULTI-CH  
• “SMALLis not available for FRONT(L/R) when “OFF” is  
selected for SUB WOOFER.  
(Default : ON)  
DOWN SAMPLING  
• When in playback of DVD audio, the sound may not  
come out as set due to restrictions in the disc or the  
player.  
• During DVD-Audio playback, the Low Pass Filter (which  
filters out the sound with the sound wave frequency  
over 100Hz) of the SUB WOOFER will be turned off  
with the following speaker setting. Otherwise, the Low  
Pass Filter will be turned on.  
• Set to ON when outputting in  
48kHz.  
AUDIO  
DRC  
DOLBY DIGITAL  
DTS  
DOWN SAMPLING ON  
ANALOG  
SACD  
OFF  
ON  
PCM  
2.0 CH  
MULTI-CH  
When playing disc with copright Protection  
• Even If you select OFF, copyright protection will be acti-  
vated and sound will be down sampled at 48kHz.  
FRONT(L/R): LARGE  
CENTER: LARGE  
(Default : 2.0 CH)  
SUB WOOFER: ON  
SURROUND(L/R): LARGE  
ANALOG  
2.0 CH : Output 2ch sound  
5.1 CH : Output Multi channel sound  
DELAY TIME  
To enjoy 5.1-channel surround sound, the distance between the lis-  
tening position and all speakers (excluding the Sub woofers) should  
ideally be set at a uniform distance on a circle. If the speakers can-  
not be set at this manner, the ideal listening position can be virtually  
created with the delay time setting.  
AUDIO  
AUDIO  
ANALOG  
DRC  
DOLBY DIGITAL  
DTS  
DOWN SAMPLING ON  
ANALOG  
SACD  
OFF  
ON  
PCM  
2.0 CH  
5.1 CH  
2.0 CH  
MULTI-CH  
K or L button to select the  
setting item, then press the ENTER  
Use the  
SACD (Default : MULTI-CH)  
2 CH : Playback a 2ch area.  
AUDIO  
DELAY TIME  
button.  
DISTANCE  
FRONT(L/R)  
CENTER  
SURROUND  
DEFAULT  
FEET  
10ft  
10ft  
10ft  
ON  
MULTI-CH : Playback a multi-ch area.  
CD AREA : Playback a CD area.  
• Press the K or L button to select  
the speaker to set, then press  
the ENTER button.  
When choosing MULTI-CH, choose 5.1CH as well as the  
audio channel in the audio setting of the setup menu.  
DISTANCE (Default : FEET)  
METERS(when the ENTER button is pressed):  
The unit of distance is set to meters (“m”).  
FEET(when the ENTER button is pressed):  
The unit of distance is set to feet (“ft”).  
AUDIO  
AUDIO  
SACD  
DRC  
DOLBY DIGITAL  
DTS  
OFF  
ON  
PCM  
2 CH  
MULTI-CH  
CD AREA  
DOWN SAMPLING ON  
ANALOG  
SACD  
2.0 CH  
MULTI-CH  
5
Press the SETUP button to exit.  
EN  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD SETUP  
FRONT(L/R), CENTER, SUR-  
Parental Control  
ROUND(L/R) (Default : 10ft)  
AUDIO  
DELAY TIME  
FRONT(L/R):  
Ratings Control limits playback of discs with unsuitable audience  
ratings. A four digit code established by the user will unlock the  
parental lock.  
This feature allows you to prevent discs with objectionable  
scenes from being played by your children.  
DISTANCE  
FRONT(L/R)  
CENTER  
SURROUND  
DEFAULT  
FEET  
10ft  
10ft  
10ft  
ON  
The distance can be set within the  
range of 0 to 60 feet.  
CENTER, SURROUND:  
These are depends on the setting  
value of FRONT(L/R).  
PARENTAL LEVEL  
AUDIO  
FRONT(L/R)  
Rating Level allows you to set the rating level of your DVD discs.  
Playback will stop if the disc’s ratings exceed the level you set.  
11ft  
10ft  
9ft  
8ft  
7ft  
1
Press the SETUP button in STOP mode.  
Press the B button to select CUSTOM, then press  
the ENTER button.  
6ft  
5ft  
2
NOTES:  
3
4
Press the s or B button to se-  
• It is not possible to adjust this item if CENTER and  
SURROUND have been set to OFF in the SPEAKER  
SIZE setting.  
• When DEFAULT is selected and the ENTER button is  
pressed, all the items are restored to their factory  
default settings.  
lect PARENTAL, then press the  
PARENTAL  
ENTER button.  
Please enter  
a
4-digit password.  
Enter your four-digit password  
then press the ENTER button.  
BALANCE  
5
Press the K or L button to se-  
lect PARENTAL LEVEL, then  
press the ENTER button.  
When the channel level differs from each speaker, the adjust-  
ment can be made in the unit of dB (-12dB to 0dB).  
TEST:  
PARENTAL  
PARENTAL LEVEL ALL  
CHANGE  
• Press the K or L button to select  
TEST, then press the ENTER  
button.  
AUDIO  
BALANCE  
The test tone will output from  
TEST  
FRONT (L)  
CENTER  
FRONT (R)  
SUB WOOFER  
SURROUND (R)  
SURROUND (L)  
0dB  
0dB  
0dB  
0dB  
0dB  
0dB  
each speaker in turn.  
6
7
Press the K or L button to se-  
lect the desired level, then  
press the ENTER button.  
PARENTAL  
PARENTAL LEVEL  
ALL  
8
7[NC-17]  
6[R]  
5
CHANNEL LEVEL:  
4[PG13]  
3[PG]  
• Press the K or L button to select  
the speaker to set, then press  
the ENTER button.  
Press the SETUP button to exit.  
NOTES:  
AUDIO  
TEST  
When doing this for the first time, enter any 4 digits. (except for  
4737) That number will be used as the password from the sec-  
ond time onward.  
FRONT (L)  
CENTER  
FRONT (R)  
SURROUND (R)  
SURROUND (L)  
0dB  
0dB  
-1dB  
-2dB  
-5dB  
To change the password, press the K or L button to select  
CHANGE at step  
5
, then press the ENTER button. Enter the  
four-digit password, then press the ENTER button.  
With some DVDs, it may be difficult to find if they are compati-  
ble with parental lock.Be sure to check if the parental lock func-  
tion operates in the way that you have set.  
Record the password in case you forget it.  
The parental lock level is equivalent to the following USA movie  
ratings.  
• Press the K or L button to select  
the desired level for each speak-  
er, then press the ENTER but-  
ton.  
AUDIO  
FRONT (L)  
0dB  
-1dB  
-2dB  
-3dB  
-4dB  
-5dB  
-6dB  
LEVEL 7: NC-17  
LEVEL 6: R  
LEVEL 4: PG13  
NOTES:  
LEVEL 3: PG  
• While the test tone is being output, the channel bal-  
ance adjustment cannot be made.  
LEVEL 1: G  
The parental lock levels for “CANADA” are included for future use.  
Check the appropriate parental lock level when you buy a DVD  
video disc equipped with the parental lock feature in the future.  
• When TEST is selected, no test tone will be output  
from SUBWOOFER.  
• It is not possible to adjust this item for the speaker that  
has been set to OFF in Speaker Size setting.  
3
Press the SETUP button to exit.  
IF YOU FORGET THE PASSWORD  
1
Press 4, 7, 3, 7 at step 4.  
Password will be cleared and rating level will be set to ALL.  
2
Repeat steps 5-7 to re-establish the parental lock.  
CONTROL LEVELS  
ALL  
Parental lock is cancelled.  
Level 8  
DVD software of any grade (adult/general/children) can  
be played back.  
Levels 7 to 2  
Only DVD software intended for general use and chil-  
dren can be played back.  
Level 1  
Only DVD software intended for children can be played back,  
with those intended for adult and general use prohibited.  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD SETUP  
Language  
A-B  
Abkhazian  
Afar  
Code  
Language  
Frisian  
Code  
Language  
Malay  
Code  
Language  
Code  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE]  
T
6561  
5165  
6567  
6569  
6568  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Galician  
Malayalam  
Maltese  
Maori  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Afrikaans  
Albanian  
Amharic  
Marathi  
Moldavian  
Mongolian  
Nauru  
Arabic  
Tagalog  
Tajik  
Tamil  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Armenian  
Assamese  
Aymara  
Nepali  
Norwegian [NOR]  
O-R  
Occitan  
Tatar  
Azerbaijani  
Bashkir  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Telugu  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Thai  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
Tibetan  
Tigrinya  
Tonga  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
C-E  
Cambodian  
Catalan  
Chinese [CHI]  
Corsican  
Croatian  
Czech  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
F-H  
Korean [KOR]  
Kurdish  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
Faroese  
5261  
5256  
5255  
5264  
Singhalese  
Siswat  
Slovak  
Fiji  
Finnish [FIN]  
French [FRE]  
Slovenian  
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio or Subtitle language  
setting on pages 22 and 23. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)  
EN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Cleaning the Cabinet  
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,  
ammonia or abrasives.  
Cleaning Discs  
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular  
motion.  
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, adrasive cleaning agents or  
antistatic spray intended for analogue records.  
Cleaning the disc lens  
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROU-  
BLESHOOTING GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or  
an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.  
Disc Handling  
• Use discs which have the following logos on them.  
(Optical audio digital discs.)  
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is not used.  
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be  
played on the this product. Do not attempt to play such discs, as they may damage the  
player.  
DIGITAL VIDEO  
Make your contribution to the environment!!!  
• Used up batteries do not belong in the dust bin.  
You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.  
EN  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, con-  
sulting the following checklist.  
Problem  
No power  
Solution  
–Check if the AC power cord is properly connected.  
–Unplug the outlet once, and wait for 5-10seconds and then plug it in  
again  
No sound or picture  
–Check if the TV is switched on.  
–Check the video connection  
–Check the VIDEO/AUDIO cable connections to the TV  
(See Connecting to a TV)  
–The sound of a Super Audio CD is not output from the 2ch AUDIO  
OUT jacks. Connect an audio cable to the 5.1ch AUDIO OUT jacks  
(FRONT L, R).  
–Check if the progressive switch is set correctly according to your TV.  
If your TV is not compatible with progressive scan, keep the  
Progressive switch to “INTERLACE.”  
Distorted picture  
–Sometimes a small amount of picture distortion may appear.  
This is not a malfunction.  
–Connect the player directly to the TV.  
–Connect DVD player directly to the TV.  
–Make sure the disc is compatible with the DVD player.  
–Adjust the volume.  
Completely distorted picture or  
black/white picture with DVD  
No sound or distorted sound  
–Check that the speakers are connected correctly.  
–Check the digital connections.  
No audio at digital output  
–Check if the audio format of the selected audio language matches  
your receiver capabilities.  
Picture freezes momentarily  
during playback  
–Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from center to edge.  
–Clean the disc  
Disc can’t be played  
–Clean the disc  
–Ensure the disc label is facing up.  
–Check if the disc is defective by trying another disc.  
–Cancel the parental lock or change the control level.  
–Insert a correct disc that plays on this player.  
–Reset the player by switching the player off, then on again.  
No return to start-up screen when  
disc is removed  
The player does not respond to  
the remote control  
Aim the remote control directly at the sensor on the front of the player.  
–Reduce the distance to the player.  
–Replace the batteries in the remote control.  
–Re-insert the batteries with their polarities (+/– signs) as indicated.  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Buttons do not work or player stops  
responding  
Player does not respond to some  
operating commands during playback  
DVD player cannot read  
CDs/DVDs  
–Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
–Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVD player for repair.  
–The angle cannot be switched for DVDs which do not contain  
multiple angles. In some cases multiple angles are only recorded  
for specific scenes.  
Angle does not switch  
Playback does not start when the title is selected –Check the “PARENTALsetting.  
The password for rating level has been forgotten  
–Enter the default password “4737”, then your forgotten password  
will be cleared  
No sound of Super Audio CD is output  
–Check if an audio cable is connected to the 5.1ch AUDIO OUT  
jacks (FRONT L,R).  
NOTES:  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating  
Instruction for details on correct operations.  
Playback from a desired track and random playback are not available during program playback.  
EN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
SIGNAL SYSTEM  
DIGITAL AUDIO OUTPUT  
NTSC color  
Optical digital output: Optical connector, 1 set  
Coaxial digital output: Pin jack, 1 set  
APPLICABLE DISCS  
(1) DVD-Audio/DVD-Video Discs  
1-layer 12cm single-sided discs, 2-layer 12cm single-sided  
discs, 2-layer 12cm double-sided discs (1 layer per side)  
1-layer 8cm single-sided discs, 2-layer 8cm single-sided  
discs, 2-layer 8cm double-sided discs (1 layer per side)  
(2) Super Audio CD  
(3) DVD-R/DVD-RW  
(4) Compact discs (Audio CD, Video CD)  
12cm discs, 8cm discs  
POWER SUPPLY  
AC 120V, 60Hz  
POWER CONSUMPTION  
16W (Standby: 0.4W)  
MAXIMUM EXTERNAL DIMENSIONS  
440 (width) x 75 (height) x 211 (depth) mm  
(17-5/16” x 2-61/64” x 8-5/16”) (including protruding parts)  
(5) CD-R/CD-RW  
MASS  
2.2Kg (4.9lbs)  
S-VIDEO OUTPUT  
Y output level: 1Vp-p (75/ohms)  
C output level: 0.286Vp-p  
Output connectors: S connectors, 1 set  
REMOTE CONTROL UNIT  
RC6400DV  
Infrared pulse type  
VIDEO OUTPUT  
Output level: 1Vp-p (75/ohms)  
Supply: DC 3V, 2 R6P/AA batteries  
Output connector: Pin jacks, 1 set  
COMPONENT OUTPUT  
Y output level: 1Vp-p (75/ohms)  
CB/PB output level: 0.7Vp-p (75/ohms)  
CR/PR output level: 0.7Vp-p (75/ohms)  
Output connector: Pin jacks, 1 set  
AUDIO OUTPUT  
Output level: 2Vrms  
2 channel (L, R) output connector: Pin jack, 1 set  
Multi channel (FL, FR, C, SW, SL, SR) output connector: Pinjack, 1 set  
AUDIO OUTPUT PROPERTIES  
(1) Frequency response  
1 DVDs (linear PCM) : 4Hz to 22kHz (48 kHz sampling)  
: 4Hz to 44kHz (96 kHz sampling)  
: 4Hz to 88kHz (192 kHz sampling)  
2 CDs  
3 Super Audio CD  
(2) S/N ratio  
: 4Hz to 20kHz  
: 4Hz to 100kHz  
: 115dB  
(3) Total harmonic distortion : 1kHz CD: 0.003%  
(4) Dynamic range  
: DVD: 100dB  
CD: 98dB  
EN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can find your nearest authorized distributor or dealer on our website.  
JAPAN  
U.S.A  
Marantz Japan, Inc.  
Marantz America, Inc.  
Marantz Europe B.V.  
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, kanagawa 228-8505, Japan  
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.  
EUROPE  
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands  
is a registered trademark.  
2003/10  
MITi  
45AW851250  
Printed in China  
0VMN03870  
★★★★★  
E57M5UD  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenoxx Electronics Stove Optima 3 FS User Manual
LG Electronics Clothes Dryer DLE0442 User Manual
LG Electronics Home Theater Server PCS200R User Manual
Life Fitness Home Gym FZTP User Manual
LOREX Technology Security Camera IPSC2230 User Manual
MB QUART Car Speaker Rua210 User Manual
McCulloch Lawn Mower 96041009700 User Manual
Melissa Toaster 643 073 User Manual
Metra Electronics Car Stereo System 99 7425 User Manual
Metz Camera Flash 28 CS 2 User Manual