Marantz CD Player SA8260 User Manual

Model SA8260 User Guide  
Super Audio CD Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY  
INSTRUCTIONS  
READ BEFORE OPERATING EQUIPMENT  
This product was designed and manufactured to meet strict quality  
and safety standards. There are, however, some installation and  
operation precautions which you should be particularly aware of.  
12. Grounding or Polarization – This product may be equipped  
with a polarized alternating-current line plug (a plug having one  
blade wider than the other). This plug will fit into the power  
outlet only one way. This is a safety feature. If you are unable  
to insert the plug fully into the outlet, try reversing the plug. If  
the plug should still fail to fit, contact your electrician to replace  
your obsolete outlet. Do not defeat the safety purpose of the  
polarized plug.  
1. Read Instructions – All the safety and operating instructions  
should be read before the product is operated.  
2. Retain Instructions – The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings – All warnings on the product and in the  
operating instructions should be adhered to.  
4. Follow Instructions – All operating and use instructions should  
be followed.  
5. Cleaning – Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
AC POLARIZED PLUG  
13. Power-Cord Protection – Power-supply cords should be routed  
so that they are not likely to be walked on or pinched by items  
placed upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point where  
they exit from the product.  
6. Attachments – Do not use attachments not recommended by  
the product manufacturer as they may cause hazards.  
7. Water and Moisture – Do not use this product near water-for  
example, near a bath tub, wash bowl, kitchen sink, or laundry  
tub, in a wet basement, or near a swimming pool, and the like.  
14. Protective Attachment Plug – The product is equipped with an  
attachment plug having overload protection. This is a safety  
feature. See Instruction Manual for replacement or resetting of  
protective device. If replacement of the plug is required, be  
sure the service technician has used a replacement plug  
specified by the manufacturer that has the same overload  
protection as the original plug.  
8. Accessories – Do not place this product on an unstable cart,  
stand, tripod, bracket, or table. The product may fall, causing  
serious injury to a child or adult, and serious damage to the  
product. Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the product.  
Any mounting of the product should follow the manufacturer’s  
instructions, and should use a mounting accessory  
recommended by the manufacturer.  
15. Outdoor Antenna Grounding – If an outside antenna or cable  
system is connected to the product, be sure the antenna or  
cable system is grounded so as to provide some protection  
against voltage surges and built-up static charges. Article 810  
of the National Electrical Code, ANSI/NFPA 70, provides  
information with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding conductors, location  
of antenna-discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode. See Figure 1.  
9. A product and cart combination should be moved with care.  
Quick stops, excessive force, and uneven surfaces may cause  
the product and cart combination to overturn.  
16. Lightning – For added protection for this product during a  
lightning storm, or when it is left unattended and unused for  
long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line surges.  
10. Ventilation – Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the product and  
to protect it from overheating, and these openings must not be  
blocked or covered. The openings should never be blocked by  
placing the product on a bed, sofa, rug, or other similar  
surface. This product should not be placed in a built-in  
installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have  
been adhered to.  
17. Power Lines – An outside antenna system should not be  
located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be fatal.  
18. Overloading – Do not overload wall outlets, extension cords, or  
integral convenience receptacles as this can result in a risk of  
fire or electric shock.  
11. Power Sources – This product should be operated only from  
the type of power source indicated on the marking label. If you  
are not sure of the type of power supply to your home, consult  
your product dealer or local power company. For products  
intended to operate from battery power, or other sources, refer  
to the operating instructions.  
19. Object and Liquid Entry – Never push objects of any kind into  
this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20. Servicing – Do not attempt to service this product yourself as  
opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service  
personnel.  
22. Replacement Parts – When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer or have the same characteristics  
as the original part. Unauthorized substitutions may result in  
fire, electric shock, or other hazards.  
21. Damage Requiring Service – Unplug this product from the wall  
outlet and refer servicing to qualified service personnel under  
the following conditions:  
23. Safety Check – Upon completion of any service or repairs to  
this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating  
condition.  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
product.  
24. Wall or Ceiling Mounting – The product should be mounted to a  
wall or ceiling only as recommended by the manufacturer.  
c. If the product has been exposed to rain or water.  
25. Heat – The product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
d. If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way, and  
f. When the product exhibits a distinct change in performance –  
this indicates a need for service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FIGURE 1  
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO  
NATIONAL ELECTRICAL CODE INSTRUCYIONS  
CONTAINED IN ARTICLE 810 -"RADIO AND TELEVISION EQUIPMENT"  
ANTENNA LEAD  
IN WIRE  
GROUND CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC - NATIONAL ELECTRICAL CODE  
NOTE TO CATV SYSTEM INSTALLER:  
This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC,  
which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be  
connected to the grounding system of the building, as close to the point of cable entry as practical.  
NOTE:  
aged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV tech-  
nician for help.  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interfer-  
ence in a residential installation. This equipment gen-  
erates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If  
this equipment does cause harmful interference to  
radio or television reception, which can be determined  
by turning the equipment off and on, the user is encour-  
NOTE:Changes or modifications may cause this unit  
to fail to comply with Part 15 of the FCC Rules and may  
void the user's authority to operate the equipment.  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Cet appareil numérique de la Classe B est  
conforme á la norme NMB-003 du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
INTRODUCTION .........................................................................................................2  
Product Features .....................................................................................................2  
About super audio ...................................................................................................2  
Playing CD-RW discs ..............................................................................................2  
Applicable Discs to the Unit.....................................................................................2  
PREPARATION ...........................................................................................................3  
Compact discs .........................................................................................................3  
Precautions .............................................................................................................4  
Using Remote Control Unit......................................................................................4  
Loading batteries .....................................................................................................4  
Names of parts and their functions..........................................................................5  
CONNECTIONS ..........................................................................................................7  
Connecting to a 2-channel (Analog / Digital) stereo amplifier/receiver ...................7  
Connecting to an analog multi-channel amplifier/AV receiver .................................8  
The Speaker Setting of SACD for Multi-Channel Audio ..........................................9  
OPERATION..............................................................................................................10  
Connecting the power supply ................................................................................10  
Normal Playback ...................................................................................................10  
Search/Skip ...........................................................................................................12  
Repeat Play ...........................................................................................................12  
Random Play .........................................................................................................13  
Program Play.........................................................................................................13  
AMS Play...............................................................................................................14  
About TEXT Information Display ...........................................................................15  
About TEXT ...........................................................................................................15  
Timer Play .............................................................................................................16  
Filter Switch ...........................................................................................................16  
TROUBLE SHOOTING..............................................................................................17  
SPECIFICATIONS .....................................................................................................55  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Product Features  
Applicable Discs to the Unit  
This unit can playback the outstanding sound performance  
in Super Audio CD. This unit has the following unique features.  
1. Super Audio CD  
• D/A converter section that accurately converts DSD/CD  
signal into high-quality analog signal with the DEM(Dynamic  
Element Matching) Super DAC(CS4397).  
There are three types of Super Audio CDs.  
Single-layer Disc  
Dual-layer Disc  
• Low-noise low-distortion filter circuit and high-speed current-  
feedback-type output amplifier with the differential input type  
HDAM.  
Hybrid-layer Disc  
Text information display function that can display disc titles,  
track titles etc. in Super Audio CD/CDs.  
SACD Disc Types  
Hybrid-layer Disc  
Dual-layer Disc  
• CD-R/CD-RW discs can be played.  
Single-layer Disc  
HD layer  
HD layer  
CD layer  
HD layer  
About super audio  
And each type may contain two areas of recorded information.  
High quality stereo area  
High quality multi-channel area  
The Super Audio standard is based on Direct Stream Digital  
(DSD) technology. This new direct-stream digital format  
comprises a 1-bit system that has a digital sampling frequency  
that is 64 times higher than that of conventional audio CD.  
The results are spectacular: a frequency response of over  
50k Hz and a 120 dB dynamic range over the entire audible  
spectrum. Mixed with as many of the original frequencies as  
possible, the audio information audible for human ears sounds  
much more natural.  
All audible frequencies are, after all, embedded in the  
frequency range as emitted by the sound source. A better  
reproduction does not exist! For the first time your ears will  
relive reality.  
Single Layer Disc  
It can contain both high quality stereo area and high quality  
multi-channel area information.  
Dual Layer Disc  
It can contain both high quality stereo area and high quality  
multi-channel area information. And a double amount of  
information can be stored on the disc thanks to the second  
layer.  
Hybrid Layer Disc  
The hybrid disc may contain not only both information areas  
but also a second, standard CD layer, making it playable  
on standard CD players.  
Playing CD-RW discs  
Hybrid SACD-Disc  
This unit can play back the CD-RW (ReWritable) discs as well  
as ordinary music CD and CD-R (Recordable) discs.  
1
CD layer that plays on any of your  
existing CD players  
• The CD-R and CD-RW discs should contain properly-  
recorded TOC information so that they can be played back.  
With the CD recorder system, writing the TOC information  
in a disc is referred to as finalizing the disc. A disc cannot  
be recognized as a CD disc and played back unless it has  
been finalized properly. For details, please read the  
instruction manual provided with a CD recorder.  
High-Density layer containing:  
- High-Quality DSD Stereo  
- High-Quality DSD Multi-channel  
2
3
* TOC stands for Table Of Contents and contains information  
such as the total number of tracks and total playing time  
of the disc.  
The number of tracks recorded may vary per layer. It will be  
shown on the display window of the unit.  
• This unit can play only the discs recorded in the CD-DA  
format designed for music reproduction. Do not attempt to  
play a disc containing other data, such as a CD-ROM for  
PCs, on this unit.  
2. Audio CD (CDDA)  
• As the playback of a CD-RW disc necessitates partial  
change of the player setup, it may take longer time for  
reading the TOC information than when a music CD or CD-  
R disc is played.  
Audio CDs contain music tracks only.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
Compact discs  
The glossy side shining like a rainbow is the front side of the  
disc, and the side on which the label is printed is the back.  
Unlike conventional turntables for playing analog discs, the  
SA8260 Super Audio CD Player reads the information  
recorded on the disc from underneath without contacting it  
using a beam of laser light. Therefore, the performance of a  
compact disc will not degrade like conventional analog  
records.  
Handle discs carefully so as not to damage or scratch the  
front side.  
To protect the disc, avoid placing it in the following locations:  
In direct sunlight or near a source of heat like a heater.  
In a place which is damp or dirty.  
In a place which could be exposed to rain, such as near a  
window.  
Always keep the disc surface clean.  
Up to six billion data units are recorded on the front side of  
the disc. When cleaning the disc surface, always be sure to  
use a special compact disc cleaner and wipe as shown below.  
Wipe in a radial direction.  
Do not wipe in circumferential direction.  
Do not use conventional record cleaner for analog records,  
as this will adversely affect the disc surface.  
Store discs properly by placing them in their disc cases.  
Do not attach a piece of paper or sticker on the label side  
of disc.  
When a disc has a piece of plastic tape or rental CD label  
with paste protruded from the edge or when a disc has a  
trace of such a sticky object, do not attempt to play the  
disc. If such a disc is played on the CD player, impossibility  
of taking out the disc or other malfunction may result.  
Do not use a disc with a special shape.  
Do not attempt to play a disc with a special shape such  
as a heart-shaped disc or octagonal disc. Otherwise the  
equipment malfunction may result.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Loading batteries  
Batteries in this remote control unit have a life of approximately  
1 year under normal operating conditions. If the remote control  
unit is not going to be used for an extended period of time,  
remove the batteries. Also, if you notice that the batteries are  
starting to run down, replace them as soon as possible.  
• In winter, windows on a well-heated room you can see water  
drops on it or the window get fogged. It is called dew. Super  
Audis CD players have an optical lens so dew may form on  
it under those circumstance.  
- In a room that heating has just started.  
- In a high-humid room.  
q Remove the battery cover.  
- When the unit is brought to a warm room from a cold  
place.  
If dew is on the lens track information cannot be read and  
the unit malfunctions. So please wait about 30 minutes to  
play.  
• The unit may interfere with a tuner and TV. If it happens set  
the unit with a distance from the tuner and TV.  
w Insert the batteries with correct +/– orientation.  
• Noise level is far less than analog discs so noise can hardly  
be heard until music starts. If the volume of the amplifier is  
set loud, other audio components may be damaged.  
Two AA-size (R6) batteries  
• This unit can playback only Super Audio CDs and normal  
music CDs. The following disks cannot be played. CD-  
ROMs for personal computers, Game CDs, Video CDs,  
DVDs(Video/Audio), DTS-CDs, etc.  
To prevent any accidents, please set the unit  
close to the power outlet so that you can unplug  
it quickly.  
e Close the battery cover until it clicks shut.  
Using Remote Control Unit  
I Remote control  
Operate the remote control unit (SA8260) within a distance of  
approx. 5 m from the infrared signal reception window (remote  
sensor) on the front of the SACD player.  
Remote control operation may not be possible if the remote  
control unit’s transmitter is not pointing in the direction of the  
remote sensor or if there is an obstruction between the  
transmitter and the remote sensor.  
Handling Batteries  
Improper use of batteries may cause fluid leakage or  
explosion. Be careful in the following points.  
• Insert batteries correctly in the +/- polarity direction as  
indicated on the unit.  
• Do not use brand-new batteries and used batteries  
together.  
Remote control operating range  
Super Audio CD player  
SA8260  
• Dry cell batteries may generate different voltages even  
though their shapes are the same. Do not use different  
types of batteries together.  
• Some batteries are rechargeable and some are not.  
See cautions on batteries carefully to use.  
Approx. 5m  
60¡  
Remote control unit (RC8260SA)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
,
(Track Skip/Search  
Names of parts and their functions  
buttons)  
These buttons can be used as both track skip and track search  
buttons. (The buttons on the main unit only.)  
Please read the following instructions referring to the illustration  
on page 56.  
: Each time this button is pressed, the track being  
played is skipped forward. When this button is  
held down, tracks are searched forward (Fast  
Forward).  
I FRONT PANEL  
z
switch  
POWER  
STANDBY indicator  
: When this button is pressed, the unit goes back  
to the beginning of the current track. If the button  
is pressed more times, the track being played is  
skipped back. When this button is held down,  
tracks are searched backward (Fast Rewind).  
In program play, Fast Forward and Fast Rewind can be done  
in the playing track only.  
Press this switch to turn ON the unit, press it again to turn into  
STAND-BY and stand-by indicator will light.  
x DISC TRAY  
c REMOTE SENSOR  
This window is to receive signals from the remote control unit.  
PAUSE button  
Press this button to pause playback. If pressed again, the  
unit returns to playback.  
v DISPLAY WINDOW  
This window shows status of the unit.  
STOP button  
Press this button to stop playback. Also this button is used to  
clear all programs.  
b
SOUND MODE button  
This button is to select sound mode on a Super Audio CD.  
Select from Multi-Channel, Stereo and CD (if available). ( See  
page 11)  
PLAY button  
Press this button to start playback.  
TIME  
n
button  
OPEN/CLOSE  
button  
Press this button to open the tray. Put on a disk label side up.  
Press the button again to close the tray.  
This button is to change information displayed from text  
information to time information when playing a disc with text.  
Also this button can change time information displayed. Each  
time it is pressed, the display changes in the following order.  
“track elapsed time” ”track remaining time” ”total  
remaining time” “track elapsed time” ( See page 11)  
DISPLAY OFF  
Press this button to turn on and off the information display  
window.  
TEXT  
m
button  
When a disc with text is being played, this button changes  
information displayed from time information to text information.  
( See page 15)  
When a disc without text information is being played, “No  
Text” will be displayed.  
CD  
This indicator lights when an audio CD disc is lorded, or a  
hybrid SACD disc is loaded and the sound mode is in CD.  
SACD STEREO, SACD MULTI  
It indicates the sound mode when a Super Audio CD is loaded.  
,
DISPLAY button  
This button can turn on and turn off the display window.  
. PHONES jack  
This jack is to connect the headphones.  
LEVEL  
This is to adjust the headphone volume.  
* In SACD multi-channel play, front L/R channels will be output.  
# In this instruction manual, some operations can only be performed with the remote control. For operations that can be  
performed with buttons both on the main unit and on the remote control, the button names are shown in the mark.  
And for operations that can only be performed with buttons on the remote control, the button names are shown in the  
mark.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
RANDOM  
This button is for random play. (See page 13)  
¤
button  
I REMOTE CONTROLLER  
z
b
n
m
button  
POWER  
SOUND MODE button  
AMS  
¤
(Automatic Music Scan button)  
Use this button for AMS play. (See page 14)  
TIME  
TEXT  
button  
button  
REPEAT  
¤
button  
This button is for repeat play. Each time this button is pressed,  
repeat mode changes as follows. “All Repeat” “Track  
Repeat” “Repeat Off” (See page 12)  
button  
PAUSE  
STOP button  
button  
I REAR PANEL  
PLAY  
OPEN/CLOSE  
button  
DISPLAY OFF button  
A MULTI CHANNEL AUDIO OUT (Analog output)  
FRONT L/R  
SURROUND L/R : Output for surround speakers  
CENTER  
: Output for front speakers  
The buttons listed above are the same to the buttons on the  
front panel of the main unit.  
Please see the correspond items in “Front Panel” section.  
: Output for center speaker  
: Output for sub woofer  
SUB WOOFER  
B FILTER STANDARD/CUSTOM  
-
(Numerical buttons)  
0
9
(Filter standard/custom switch)  
Set this switch according to the amplifier and speakers to be  
connected. For more details, refer to “Filter Switch” section  
on page 16.  
* Switching the filter setting has to be done while the unit is in  
stand-by mode. If the setting is switched while playing, noise  
may occur.  
Use these buttons to select tracks directory.  
PROGRAM  
¤
button  
This button is for program play. (See page 13)  
¤
,
(Track skip buttons)  
: Each time this button is pressed, the track being  
played is skipped forward.  
C DIGITAL OUT OPTICAL  
: When this button is pressed, the unit goes back  
to the beginning of the current track. If the  
button is pressed more times, the track being  
played is skipped back.  
It outputs the playing CD signal in digital format. This jack is  
to be connected with a recording device, amplifier, D/A  
converter, etc that has optical digital input using an optional  
square type optical digital cable.  
* Search buttons are provided separately for the remote  
control unit. Use ¤ Search buttons for search function.  
* No signal will be output when a SACD is played.  
D DIGITAL OUT COAXIAL  
¤
¤
,
(Search buttons)  
It outputs the playing CD signal in digital format. This jack is  
to be connected with a recording device, amplifier, D/A  
converter, etc that has coaxial digital input using an optional  
coaxial digital cable.  
: While this button is pressed during playback,  
tracks are searched backward.  
: While this button is pressed during playback,  
tracks are searched forward.  
* No signal will be output when a SACD is played.  
SCROLL/RECALL  
button  
E REMOTE CONTROL IN/OUT  
Connecting with a remote cable, this unit can be controlled  
Use this button to scroll text while displaying text information  
in a disc with text.  
Also, this button is to check programmed tracks for program  
play. (See page 14)  
by another Marantz unit that has D-bus function.  
F EXT./INT. (External/Internal switch)  
When using the unit as standalone, set this switch to INT.  
position. If this unit is connected to another Marantz unit with  
D-bus function and remote control sensor, set the switch to  
EXT. position.  
CANCEL  
¤
button  
Use this button to cancel a programmed track. (See page  
14)  
* If the unit is used as standalone and the switch is set to EXT.  
position, remote control unit cannot be used.  
A-B  
¤
(A-B Repeat button)  
This button is to determine starting and ending points for A-B  
repeat play. (See page 12)  
G AC POWER INPUT JACK  
Connect the supplied power cord to this jack and a household  
AC power outlet.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS (Connecting to audio components – Analog/Digital)  
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection  
please refer to instruction manuals of stereo system to be connected.  
Caution: Do not connect output from this unit to PHONO input of your audio system.  
Connecting to a 2-channel (Analog / Digital) stereo amplifier/receiver  
1. Connect the audio cable q to this unit’s front speaker outputs and the stereo inputs on your amplifier, receiver or stereo  
system.  
2. To play a SACD disc with this connection, set the SOUND MODE to STEREO.  
3. Connect the optical cable r, coaxial cable t to the digital input on your AV amplifier, D/A converter, CD-R, etc..  
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when a CD disc is played. When playing a SACD disc,  
no signal will be output.  
AC IN  
MULTI CHANNEL AUDIO OUT  
SA8260  
SURROUND  
CENTER  
SUB  
WOOFER  
L
R
FILTER  
DIGITAL AUDIO OUT REMOTE CONTROL  
FRONT  
OPT. COAX.  
IN  
L
R
STAN-  
DARD  
CUS-  
TOM  
EXT.  
INT.  
OUT  
To Analog Audio output  
To Digital Audio output  
(white) (red)  
(Optional)  
r
t
(Optional)  
Audio cable q  
(Supplied)  
To audio input terminals  
on amplifier  
INTEGRATED AMPLIFIRE PM6100SA  
INPUT SELECTOR  
VOLUME  
Connect to digital input  
terminals of receiver, D/A  
converter or CD recorder,  
etc..  
Example)  
PM6100SA  
MD/TAPE  
CD-R  
AUX/DVD  
TUNER  
CD  
PHONO  
REC SELECTOR  
OFF  
BASS  
TREBLE  
BALANCE  
MIN  
SPEAKER  
MAX  
POWER ON/OFF  
SOURCE DIRECT  
TUNER  
AUX/DVD  
CD  
PHONES  
MUTE  
LOUDNESS  
PHONO  
CD-R  
MD/TAPE  
COPY  
MD/TAPE  
CD-R  
ON  
OFF  
ON  
OFF  
ON  
OFF  
+
+
R
-
-
L
Right speaker  
Left speaker  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an analog multi-channel amplifier/AV receiver  
This unit can play multi-channel recorded SACD discs. For multi-channel play, select “MULTI” with SOUND MODE button on the  
unit or remote.  
1. Connect the audio cable q to this unit’s front speaker outputs and corresponding inputs on your amplifier/receiver.  
2. Connect the audio cable w to this unit’s surround speaker outputs and corresponding inputs on your amplifier/receiver.  
3. Connect the audio cable e to this unit’s center speaker and sub-woofer outputs and corresponding inputs on your amplifier/  
receiver.  
AC IN  
MULTI CHANNEL AUDIO OUT  
SURROUND  
CENTER  
SUB  
WOOFER  
L
R
FILTER  
DIGITAL AUDIO OUT REMOTE CONTROL  
SA8260  
FRONT  
OPT. COAX.  
IN  
L
R
STAN-  
DARD  
CUS-  
TOM  
EXT.  
INT.  
OUT  
To Analog Audio output  
(white) (red) (white) (red) (white) (red)  
(Supplied)  
(Supplied)  
(Supplied)  
Example)  
To 6ch input terminals on amplifier  
PM8100SA + SM6100SA  
2
INTEGRATED AMPLIFIRE PM8100SA  
I
N
P
U
T
S
E
L
E
C
T
O
R
VOLUME  
MD/TAPE  
CD-R  
DVD  
TUNER  
CD  
PHONO  
PM8100SA  
MULTI CHANNEL  
REC SELECTOR  
OFF  
BASS  
TREBLE  
BALANCE  
MIN  
SPEAKER  
MAX  
POWER ON/OFF  
TUNER  
DVD  
CD  
PHONES  
MUTE  
MULTI CHANNEL  
SOURCE DIRECT  
PHONO  
CD-R  
MD/TAPE  
COPY  
MD/TAPE  
CD-R  
ON  
OFF  
ON  
OFF  
ON  
OFF  
-
+
-
+
L
R
Front speaker (Right)  
Front speaker (Left)  
SM6100SA  
POWER AMPLIFIRE SM6100SA  
STANDBY  
POWER ON/OFF  
Sub woofer  
Center speaker  
POWER AMPLIFIRE SM6100SA  
STANDBY  
SM6100SA  
POWER ON/OFF  
Surround speaker  
(Left)  
Surround speaker(Right)  
Front speaker  
Front speaker  
(Left)  
(Right)  
Center  
speaker  
Sub woofer  
* See page 9 for proper  
speaker settings.  
Surround speaker  
(Left )  
Surround speaker  
(Right)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection (Speaker Setting)  
The Speaker Setting of SACD for Multi-Channel Audio  
We recommend you to use ITU (International Telecommunication Union) speaker setting because SACD multi-channel discs are  
recorded and mixed down to hear the best quality sound when this setting are used.  
The basic settings are 3 speakers for front and 2 for back since multi-channel discs have basically 5 channels (3 to 6 channels  
possible). There are some discs which has the 6th channel for sub-woofer. The number of channels recorded is shown on the disc.  
When you use different sizes of speakers, please adjust the volume balances in your amplifier/surround receiver. You can also use  
the 5.1 channel surround setting for DVD but surround sound may present differently form the best SACD multi-channel sound  
presence.  
Sub-woofer  
Center  
speaker  
Front speaker  
(Left)  
Front speaker  
(Right)  
60°  
approx. 110°  
approx. 110°  
Reference listening  
position  
Rear speaker  
(Left Surround)  
Rear speaker  
(Right Surround)  
The 2-front, 1-center, and 2-surround speakers should be set on the circle from the listening point as shown above. The location  
of the sub-woofer in the picture is just to you a patter of settings. Sub-woofer can be located any place in your room. (See the  
users manual of your sub-woofer.)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
# In this instruction manual, some operations can only be performed with the remote control. For operations that can be  
performed with buttons both on the main unit and on the remote control, the button names are shown in the  
mark.  
And for operations that can only be performed with buttons on the remote control, the button names are shown in the  
mark.  
Connecting the power supply  
Normal Playback  
I SACD player playback  
SUPER AUDIO CD PLAYER SA8260  
1 Plug the power cable into AC IN jack on the back panel.  
STEREO  
SACD  
MULTI  
CD  
DISPLAY OFF  
PLAY  
STOP  
PAUSE  
OPEN/CLOSE  
/
/
STANDBY  
POWER ON/STANDBY  
PHONES  
LEVEL  
SOUND MODE  
TIME  
TEXT  
DISPLAY  
-
+
AC IN  
q Press  
switch to turn on.  
POWER  
Display indications  
2 Turn on the power switch of the audio unit (amplifier, etc.)  
that is connected with this unit. Set the selector on the  
connected unit to this unit.  
w Press  
OPEN/CLOSE button.  
3 Plug the power cable into an AC outlet.  
The disc tray opens. Set a disc on the tray. Make sure the  
label side is up.  
* The unit turns into stand-by mode and stand-by indicator  
lights.  
e Press  
r Press  
OPEN/CLOSE button.  
PLAY button.  
Disc type is automatically detected and playback is  
started. Track number and track elapsed time(minute,  
second) appear on the display.  
* When a SACD/CD hybrid disc is loaded, SACD layer is  
automatically played. If you want to play CD layer, use  
SOUND MODE  
button to select CD layer.  
(Exp.:Track 6, Elapsed time 2 min 8 sec)  
Number of current track  
Minutes Seconds  
TRK  
TIME  
6
7
8
9 10 1112 1314 1516 1718 1920  
Remaining track numbers  
Playback automatically stops at the end of the final track.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Press  
button in stop mode  
To start playback form the first track  
SOUND MODE  
(not playing).  
Press  
PLAY button.  
The layer or area currently in is shown on the display. (CD,  
SACD STEREO, SACD MULTI) While selecting, sound  
mode indicator will flash.  
To stop playback  
STOP  
Press  
button.  
To eject disc  
Press  
OPEN/CLOSE button to open the disc tray and take  
the disc off. Press the button again to close the tray.  
Disc tray must be closed when the unit is not be used.  
SOUND MODE  
If  
button is pressed again, a selectable  
layer or area will be shown. About 2 seconds after the  
layer or area will be switched to new one.  
To pause playback  
Press  
PAUSE button.  
* When layer or area is switched, TOC will be read again.  
PAUSE indicator will light and playback is paused at the point  
that the button is pressed. To restart playback, press  
* If a CD disc or SACD disc with stereo area only is loaded,  
sound mode cannot be changed.  
PAUSE button again or press  
PLAY button.  
* When a hybrid SACD disc that has both stereo and multi-  
channel areas is loaded, sound mode will be changed  
in the following order.  
SACD multi-channel area SACD stereo area CD  
layer  
To change time display  
TIME  
Press  
Each time  
button.  
TIME  
button is pressed, display will change in the  
following order. “Track elapsed time” Track remaining time”  
Total remaining time” “Track elapsed time”.  
* Sound mode can be selected while the tray is open.  
Select a desired layer or area and press  
PLAY  
button then the tray will close and playback will be  
started.  
Track remaining time  
(The remaining playing time from the playing point to the end  
of the current track)  
Displaying the number of tracks in a SACD multi-  
“-” is displayed  
channel disc  
SOUND MODE  
If  
button is pressed once during playback,  
TRK  
TIME  
the number of channels being played will be shown.  
1516 1718 1920  
Number of channels is displayed  
Total remaining time  
(The remaining playing time from the playing point to the end  
of the last track)  
“-” is displayed “TTL (TOTAL) is displayed  
Examples  
6ch : Sub-woofer channel will be played.  
5ch : Sub-woofer channel will not be played.  
For some discs recorded in 4ch or 3ch,  
“5ch” will be displayed.  
TRK  
TTL TIME  
1516 1718 1920  
4ch or 3ch : If loaded disc is made to show the channel  
display, 4ch or 3ch will be displayed.  
TIME  
* If  
button is pressed when a disc with text is played,  
time display is given priority and text information will not be  
displayed afterward. To see text information, press TEXT  
button.  
* See software (disc) jacket or attached instraction for signal  
output terminals for 4ch or 3ch discs.  
I Switching Sound Mode (SACD)  
Sound mode indicator  
SUPER AUDIO CD PLAYER SA8260  
STEREO  
SACD  
MULTI  
CD  
DISPLAY OFF  
PLAY  
STOP  
PAUSE  
OPEN/CLOSE  
/
/
STANDBY  
POWER ON/STANDBY  
PHONES  
LEVEL  
SOUND MODE  
TIME  
TEXT  
DISPLAY  
-
+
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search/Skip  
Repeat Play  
I Direct Search (Specify track number to  
I All track repeat  
REPEAT  
When  
button is pressed, “RPT” indicator will light  
play)  
and all track repeat play begins.  
Specify track number with NUMBER buttons (0-9)  
To Return to Normal Play  
3rd track : Press  
.
3
REPEAT  
Press  
button two times. “RPT” indicator will  
2
12th track : Press  
1
and then press  
(within  
disappear, repeat mode will be off and it returns to normal  
play mode.  
approximately 1.5 seconds).  
If the first pressed number is only in the digit of ones and not  
in the digit of tens, search begins approximately 0.5 second  
after.  
* If REPEAT button is pressed when in program mode,  
programmed tracks are played repeatedly.  
If a wrong number is pressed  
Press correct number again.  
I One Track Repeat  
Press REPEAT button two times when the track is being  
played. “RPT”, ”1”indicators will light and the track will be  
played repeatedly.  
• If a track number that is not in the disc is specified, “No  
Track” will be shown on the main display. Please specify a  
correct track.  
To Exit from One Track Repeat  
Press REPEAT button.  
I A-B Repeat  
q Press  
button at your chosen starting point. “A-“  
A– B  
indicator will light.  
I Search  
If  
,
buttons on the main unit or  
,
w Press  
button again at your chosen end point. “B“  
A– B  
buttons on the remote are kept pressing during  
indicator will light and the chosen section will be played  
repeatedly.  
playback, track search begins. Release the button when the  
point you want to listen to gets close.  
* No sound can be heard during search.  
I To Exit from A-B Repeat  
Press  
button. “A-B” indicator will disappear, A-B repeat  
A– B  
I Track Skip (  
,
on the  
on the remote)  
mode will be off and it returns to normal play mode.  
main unit,  
,
* A-B repeat cannot be done when random play is going on.  
To listen to a track posterior to the current track  
Press  
button the number of times you want to proceed  
tracks.  
To listen to a track prior to the current track  
Press  
button go back to the beginning of the current  
track. Then press  
to go back.  
button the number of times you want  
• If  
it jumps to the last track. If  
last track, it jumps to the first track.  
button is pressed at the beginning of the first track,  
button is pressed in the  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Random Play  
Program Play  
When  
button is pressed, the unit shuffles track  
RANDOM  
I Program (Listen to Favorite Tracks in  
order and plays all the tracks in the shuffled order. It can be  
done in both playback and stop modes.  
Favorite Order)  
(Example: To program the 7th track in a disc with 15 tracks)  
• The gap between tracks will be approximately 4 seconds  
during random play.  
TRK  
TTL TIME  
1
2
3
4
5
6
7
8
9 10 1112 1314 15  
3
4
5
6
7
8
9 10  
q Press  
button in stop mode. “PROG” indicator  
PROG  
will flash and it goes to program mode.  
If  
button is pressed when the disc tray is open  
RANDOM  
and a disc is set, the tray will automatically close and random  
play will begin.  
Blinks  
To Exit from Random Play and Return to Normal Play  
PROG  
Press  
button again.  
RANDOM  
TRK  
TTL TIME  
If  
Button is Pressed during Random Play  
It jumps to the next track of the shuffled order.  
w Choose a track to be programmed with numeric buttons  
on the remote or buttons.  
If  
or  
Button is Pressed during Ran-  
,
dom Play  
(Example: The 15th track is chosen and its length is  
4min30sec)  
Search will be done only in the current track. Search does not  
go to the previous or next track.  
Blinks  
PROG  
To Listen to Random Play Repeatedly  
TRK  
TTL TIME  
REPEAT  
Press  
button once during random play. Every time  
15  
the order will be shuffled.  
Only the numbers of programmed tracks light up  
RANDOM  
• If  
button is pressed during program play, the  
e With the sequence described in step w above, program  
another track. Repeat that sequence to program all the  
tracks you want. You can program up to 30 tracks.  
programmed tracks will be shuffled.  
(Example: The 7th track is chosen and total length of 7th and  
15th is 7min50sec)  
Blinks  
PROG  
TRK  
TTL TIME  
7
15  
Total playing time of programmed tracks  
r When you finish programming, press  
button or  
button. Flashing “PROG” indicator will lights  
PROG  
STOP  
constantly. Program has been settled.  
Flashes  
PROG  
TRK  
TTL TIME  
7
15  
Total playing time of  
programmed tracks  
Total programmed  
number  
t Press  
PLAY button to starts playback in programmed  
order.  
* You can skip the sequence r and press  
PLAY button  
to start program play.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Check Programmed Tracks  
Q&A  
SCROLL/RECALL  
Press  
button while programming or  
program play (when “PROG” indicator is flashing or lights).  
Programmed tracks will be displayed in programmed order.  
How many tracks can be programmed?  
Up to 30 tracks can be programmed for program  
play.  
To Delete a Programmed Track  
Can I listen to program play repeatedly?  
SCROLL/RECALL  
q Press  
button in stop mode when  
Press  
button once. “RPT” indicator will  
REPEAT  
program has been made (when “PROG” indicator lights  
or flashes). Programmed tracks will be displayed in  
programmed order.  
light and program play will be repeated.  
Can I shuffle the programmed track order?  
Press  
button during program play or in  
RANDOM  
w When the track you want to delete appears on the display,  
stop mode.  
press  
button at once. The deleted tracks track  
CANCEL  
number indicator will disappear.  
To Clear Whole Program  
STOP  
Press  
button two times while in program play. In  
STOP  
stop mode, press  
or  
button once.  
CANCEL  
Program can also be cleared by pressing  
key to open the disc tray.  
OPEN/CLOSE  
To Add Tracks to Program  
AMS Play  
Press  
button when program is remaining (“PROG”  
PROG  
indicator is constantly on) and in stop mode. “PROG” indicator  
will flash and tracks can be add to the end of program.  
AMS  
If  
button is pressed in stop mode or in playback mode,  
PLAY “3” indicator will flash and the beginnings of all the  
tracks will be played for 10 seconds each starting from the  
first track. This feature is convenient to search where your  
favorite track is.  
* Please be careful about the following matters.  
• When programming 1st to 9th tracks in a disc that has over  
10 tracks by using numeric buttons,. For instance,  
programming the 3rd track after programming the 1st track,  
Blinks  
press  
after  
button more than approximately 1.5 seconds  
button is pressed.  
3
TRK  
1
1
2
3
4
5
6
7
8
9 10 1112 1314 15  
• Likewise, when programming a track at 10th or after. For  
example, to program 13th track, press button within  
approximately 1.5 seconds after button is pressed.  
3
When you have found the favorite track, press AMS button  
again. PLAY indicator will light constantly and normal playback  
will begin from the current track.  
1
• When programming a track in a disc that has less than 9  
tracks. For instance, to program the 5th track after 4th track  
AMS  
has been programmed, press  
approximately 0.5 second after  
5
button more than  
button is pressed.  
* If  
button is pressed after tracks have been  
4
programmed, only the selected tracks will be played with  
AMS.  
• When programming with  
, and  
buttons, press  
the buttons repeatedly until the track you want appears.  
And the gap has to be less than 0.5 second.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About TEXT Information Display  
About TEXT  
The following items of text information in a disc with text can  
TEXT is a new type of music disc that contains text information  
like artist name, album title, music title, etc. CDs with the logos  
shown below and most SACDs have text information.  
be displayed by pressing  
button. Nevertheless, which  
TEXT  
items of information are recorded depends on discs so some  
information may not be displayed. This unit skips unrecorded  
information to display.  
CD TEXT  
TEXT  
During Playback  
Each time  
button is pressed, text information will be  
This text information is recorded on a area which is not used  
for ordinary music CDs. Therefore music CDs with text  
information can be played with ordinary CD player. And the  
text information can be displayed with players that has TEXT  
feature.  
TEXT  
displayed in the following order. In general, information of the  
playing track will be displayed during playback.  
Title of the xxth track currently playing  
(Display will automatically change from text display to time display)  
This unit automatically detects whether text information is  
recorded and shows it on the display window.  
Album Title  
Main unit display  
xx Title  
TRK  
TTL TIME  
xx Artist  
TEXT  
1
2
3
4
5
6
7
8
9 10 1112 1314 1516 1718 1920  
xx Songwriter  
Lights up when the loaded disc has text information  
xx Composer  
xx Arranger  
Album title, track title, artist name, songwriter name, composer  
name, arranger name, can be displayed by operating main  
unit and remote control. Be noticed that those information items  
are not always recorded all in a disc.  
Time Display  
• This unit can display 12 characters in one time. If information  
is longer than 12 characters, the display will scroll right to  
left.  
In Stop Mode  
Each time  
displayed in the following order.  
• This unit can display only alphabets, numeric numbers and  
symbols. Chinese and Japanese characters cannot be  
displayed. If information is in Chinese and Japanese  
characters, the unit displays nothing.  
button is pressed, text information will be  
TEXT  
Time Display  
Album Title  
Album Artist  
-- Title  
If  
PLAY button is pressed while -- Title is displayed, that  
track will be played.  
The maximum number of characters to be displayed is 64  
characters.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Play  
Filter Switch  
This unit can perform timer play by cooperating with your audio  
timer.  
Connect this unit’s power cord to the audio timer’s power  
socket and the timer’s power cord to power outlet.  
FILTER  
STAN-  
DARD  
CUS-  
TOM  
* For connection to audio timer and it’s operation, please refer  
to the instruction manual of your audio timer.  
Super Audio CDs have a wide playback frequency band of  
100 kHz that is beyond the audible range: this means that  
their signals contain ultra-high-range components that  
conventional CDs do not have. A conventional amplifier is  
often not built to reproduce signals containing these  
components, and when Super Audio CD signals are output in  
their original state, noise may be generated, the amplifier’s  
protection circuits may be activated and/or the speakers may  
be damaged.  
SA8260  
Audio Timer  
AC IN  
To prevent this sort of trouble from occurring, the unit  
incorporates a filter (STANDARD) for attenuating the ultra-high-  
range components, and the filter can be set STANDARD or  
CUSTOM using a switch on the rear panel. (This switch is set  
to STANDARD when the unit is shipped from the manufacturing  
plant.)  
When the unit is to be connected with a next-generation  
amplifier that supports Super Audio CDs and set the switch  
to CUSTOM for use. This will ensure play with a wider  
frequency range.  
Setting Timer of Play On/Off  
SUPER AUDIO CD PLAYER SA8260  
STEREO  
SACD  
MULTI  
CD  
DISPLAY OFF  
PLAY  
STOP  
PAUSE  
* Use the switch at the STANDARD position if the unit is to be  
used with a regular amplifier. Otherwise, the amplifier and/  
or speakers may be damaged.  
OPEN/CLOSE  
/
/
STANDBY  
POWER ON/STANDBY  
PHONES  
LEVEL  
SOUND MODE  
TIME  
TEXT  
DISPLAY  
-
+
* Even when the unit has been connected with an amplifier  
that supports Super Audio CDs, change the switch to the  
STANDARD position when recording Super Audio CD sound  
on a tape deck, for instance.  
q Press STOP button for 2 seconds in stop mode.  
Timer play is activated and “Timer On” will be displayed.  
* Do not change the switch setting while the unit is in stand-  
by mode. Doing so could generate electronic noise that  
could damage your speakers, etc.  
* To turn off the timer, press STOP button for 2 seconds.  
(“Timer Off” will be displayed.)  
w Load a disc and turn into stand-by mode.  
* If program play has been set, program play will begin  
upon the timer on.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
If you think a malfunction has occurred, first check the points  
listed below, The problem is likely to have been caused by a  
simple operational error or a connection problem. If the  
problem cannot be corrected even after carrying out the  
following checks, consult your dealer or nearest Marantz sales  
office or service counter.  
Some channels are not played (Super Audio CD Multi-  
Channel)  
The disc fails to rotate.  
1. Is the mains lead plugged in properly?  
2. Is the POWER switch ON?  
1. Confirm the number of channels in the disc. (See page  
11)  
3. Is the disc placed in the correct position on the disc tray?  
4. Is the disc placed properly with the label side facing up?  
5. Is the disc dirty?  
A CD-R/CD-RW disc cannot be played.  
1. Is the disc placed upside down?  
6. Is the disc scratched?  
2. Is the disc contains properly written TOC?  
3. Is the recorded information in an audio (CD-DA) format?  
7. Is the disc warped?  
The disc is rotating but no sound is heard.  
1. Are the amplifier and speakers connected properly?  
2. Is the amplifier switch ON?  
3. Is the amplifier’s volume control set at the minimum level?  
4. Is the amplifier’s selector switch set to the correct input  
(“CD” or “AUX”, whichever corresponds to the input jacks  
the SACD player is connected to)?  
The disc stops in mid-operation.  
The sound drops out or noise is heard.  
1. Is the disc dirty?  
2. Is the disc scratched?  
3. Is the disc warped?  
* In the case of a CD-R or CD-RW disc, this problem may  
occur when the conditions under which its data was  
originally written were substandard or when the quality of  
the disc itself is poor.  
Remote control operation is not possible.  
1. Is the remote control unit’s transmitter pointed correctly at  
the remote sensor on the front of the SACD player?  
Or is there an obstruction between the transmitter and the  
remote sensor?  
2. Are the batteries in the remote control unit exhausted?  
3. Is there another strong light (from a window, etc.) striking  
the SACD player’s remote sensor?  
A Super Audio CD cannot be played.  
1. Is the disc scratched, dirty or warped?  
2. Is the amplifier’s input selector set to digital?  
* Digital audio signal will not be output when a Super Audio  
CD is played.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Super Audio CD  
CD  
Audio Characteristics  
Analog output  
Channels  
6channels (Max.)  
2Hz — 100kHz  
2Hz — 50kHz (-3dB)  
113dB  
2channels  
2Hz — 20kHz  
2Hz — 20kHz  
100dB  
Frequency range  
Frequency characteristics  
Dynamic range  
THD (1kHz)  
0.0015%  
0.0020%  
wow & flutter  
Precision of quartz  
2.2V  
Precision of quartz  
2.2V  
Output level  
Digital output  
output level (cinch JACK)  
output level (optical)  
Headphone output level  
0.5Vp-p (75)  
-19dBm  
50mW / 32(max, Vol.)  
50mW / 32(max, Vol.)  
Optical Readout System  
Laser  
AlGaAs  
650nm  
AlGaAs  
780nm  
Wave length  
Signal format  
1-bit DSD  
16-bit linear PCM  
Sampling frequency  
2.8224MHz  
44.1kHz  
Power Supply  
Input Voltage, Frequency ............................................................................................ AC 120V 60Hz  
Power Consumption....................................................................................................................... 28W  
Power Consumption (Stand-by)................................................................................................. <0.8W  
Cabinet, etc.  
Dimensions (Width × Height × Depth) .................................................................. 440 × 124 × 307mm  
Net weight .................................................................................................................................... 7.7kg  
Operating temperatures ................................................................................................ +5ºC ~ +35ºC  
Operating humidity ........................................................................................... 5 ~ 90% (without dew)  
Accessories  
• Remote control unit (RC8260SA).................................................................................................... 1  
Dimensions (Width × Height × Depth) .................................................... 48.5 × 21.5 × 152.5mm  
Net weight (without Batteries) ................................................................................................ 60g  
• AA (R6) Batteries ............................................................................................................................ 2  
• AC Power cord ............................................................................................................................... 1  
• Audio cable ........................................................................................................................... 3 pairs  
• Remote connection Cable .............................................................................................................. 1  
• User’s Guide ................................................................................................................................... 1  
• Warranty Card ......................................................................................................................... 1 pair  
Specifications subject to change without prior notice.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front of player  
SUPER AUDIO CD PLAYER SA8260  
STEREO  
SACD  
MULTI  
CD  
DISPLAY OFF  
PLAY  
STOP  
PAUSE  
OPEN/CLOSE  
/
/
STANDBY  
POWER ON/STANDBY  
PHONES  
LEVEL  
SOUND MODE  
TIME  
TEXT  
DISPLAY  
-
+
Display  
Remote Control  
RNDM PROG  
A — B RPT  
1
OPEN/  
DISPLAY OFF  
SOUND MODE  
POWER  
REPEAT  
CLOSE  
TRK  
TL TIME  
1
2
5
8
0
3
6
AMS  
RANDOM  
A-B  
4
TEXT 1 2  
3 4 5 6 7 8 910 112 1314 1516 1718 1920  
7
9
PROGRAM  
CANCEL  
Main display  
A-B : A-B Repeat indicator  
RPT 1 : Repeat indicator  
: Pause indicator  
TIME  
TEXT : TEXT indicator  
SCROLL/  
RECALL  
TEXT  
1~20,  
: Track Number indicator  
RNDM : Random indicator  
PROG : Program indicator  
TRK : Track indicator  
TTL : Total indicator  
: Play indicator  
TIME : Time indicator  
RC8260SA  
Rear of player  
AC IN  
MULTI CHANNEL AUDIO OUT  
SURROUND  
CENTER  
SUB  
WOOFER  
L
R
FILTER  
DIGITAL AUDIO OUT REMOTE CONTROL  
FRONT  
OPT. COAX.  
IN  
L
R
STAN-  
DARD  
CUS-  
TOM  
EXT.  
INT.  
OUT  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COUNTRY  
ALGERIE  
COMPANY  
Azur 2000  
ADDRESS  
8, Lotissement Ben Hatadi, Alger, Algerie  
ARMENIA  
AUSTRALIA  
AUSTRIA  
BAHREIN  
BANGLADESH  
BELGIUM  
NGYIG Ltd.  
47 A/75 St. Lalaiants, 375000 Yerevan, Armenia  
24 Lionel Road, Mt. Waverley, VIC 3149, Australia  
Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria  
P.O. Box 237,141, Government Avenue, Manama,Bahrein  
1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh  
Brusselbaan 278, 9320 Erembodegem, Belgium  
Makedonia Blvd. 16, 1606 Sofia, Bulgaria  
Jamo Australia Pty. Ltd.,  
Huber & Prohaska GmbH  
Ambassador Stores  
Target  
Van der Heyden Audio N.V.  
Ariescommerce GmbH  
BULGARIA  
CANADA  
CHINA  
Lenbrook Industries Limited  
633 Granite Court, Pickering, Ontario  
Guang Chang Audio International Co., Ltd. No.38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China  
CYPRUS  
CZECH REPUBLIC  
DENMARK  
DUBAI  
Empire Hifi systems Ltd.  
Audio International  
Audio Nord  
P.O. Box 5604, Nicosia, Cyprus  
Sokolska 41, 67902 Rajecko, OKR,Blansko, Czech Republic  
Dali Allé 1, 9610 Noerager, Denmark  
V.V.& SONS  
P.O. Box 105, Dubai, U.A.E.  
EGYPT  
Solimco  
9, El Attibaa St. Doki, Cairo, Egypt  
ESTONIA  
F.Y.R.O.M.  
FINLAND  
FRANCE  
GERMANY  
GREECE  
HiFi Club Estonia  
T.P. KODI  
Audio Nord  
Marantz France  
Marantz Deutschland  
Adamco S.A.  
Ehte 4, 90503 Haapsalu, Estonia  
ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija  
Uudenmaankatu 4-6, Helsinki SF-00120, Finland  
A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France  
Hakenbusch 3, 49078 Osnabrück, Germany  
188, Hippocratous Street, 11471 Athens, Greece  
Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands  
Unit 1706, Metroplaza II, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong  
Terez Krt.31, 1067 Budapest, Hungary  
HEADQUARTERS EUROPE: Marantz Europe B.V.  
HONG KONG  
HUNGARY  
ICELAND  
INDIA  
IRAN  
IRELAND  
ISRAEL  
ITALY  
IVORY COAST  
JAPAN  
KOREA  
KUWAIT  
LATVIA  
Marantz Asia Ltd.  
Infovox Ltd.  
ID Electronics Ltd.  
NOVA Audio Private  
Home Co.  
Armula 38, 108 Reykjavik, Iceland  
8,Punam Co-op.Society 29/30 Road#5, Union Park MUMBAI 400052, India  
5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran  
Clonskeagh, Dublin 14, Ireland  
52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel  
Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde  
B.P. 2428, Abidjan 01, Ivory Coast  
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan  
121-210, 2F Shinhan Bldg., 247-17 Seokyo-dong, Mapo-ku, Seoul, Korea  
P.O. Box 8196, Salmiah 22052, Kuwait  
Marantz Ireland  
Elmor Ltd.  
Marantz Italy  
Hifivoir  
Marantz Japan Inc.  
Mk Enterprises Ltd.  
alAlamiah Electronics Intl.  
Ace Ltd.  
61, LacPlesa Str., Riga LV 1011, Latvia  
LEBANON  
LITHUANIA  
MALAYSIA  
MALTA  
AZ Electronics S.A., 1,  
Accapella Ltd.  
P.O. Box 11 2833, Beirut, Lebanon  
Ausros, Vartu G/5, Pasazo SKG., 2001 Vilnius, Lithuania  
Wo Kee Hong Electronics Sdn. Bhd. Suite 8.1, Level 8, Menara Genesis, No. 33, Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia  
Doneo Co Ltd.  
78 The Strand, Sliema SLM07, Malta  
MAURITIUS  
SKR Electronics Ltd.  
P.O. Box 685, Bell Village, Port Louis, Mauritius  
MILITARY MARKET EUROPE PASCO GmbH  
PO BOX 1280, Sandhausen 69200, Germany  
NETHERLANDS  
NEW ZEALAND  
NORWAY  
Marantz Domestic Sales  
Wildash Audio Systems  
Audio Nord  
A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands  
14 Malvern Road, Mt. Albert, Auckland, New Zealand  
Sandkerveien 64, Oslo 0483, Norway  
OMAN  
POLAND  
PORTUGAL  
PROFESSIONAL EUROPE  
PROFESSIONAL U.S.A.  
QATAR  
REUNION  
ROMANIA  
RUSSIA  
Mustafa & Jawad Trading CO.  
Philips Polska Sp. z.o.o.  
Corel2  
Marantz Professional Products  
Marantz Professional Products  
Almana & Partners W.W.L.  
Vision +  
P.O. Box 1918, Ruwi, Oman  
Al.Jerozolimskie 195b, 02 222 Warszawa, Poland  
Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal  
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.  
Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, Illinois  
P.O. Box 49, Doha, Qatar  
180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion  
5, Zagazului Str. Bl.1G,apt.18, sector 1,Bucharest, Romania  
7/2, Montazhnaya Street, 107497 Moscow, Russia  
Nova Music Entertainment  
Absolute Audio  
SAUDI ARABIA  
SINGAPORE  
SLOVAKIA  
SLOVENIA  
SOUTH AFRICA  
SPAIN  
Adawlia Univ. Electr. Apl  
Wo Kee Hong Distribution PTE Ltd.  
Bis Audio s.r.o.  
P.O. Box 2154, Alkhobar 31952, Saudi Arabia  
130 Joo Seng Road, #03-02 Olivine Building, Singapore 368357  
Nam. SNP 10, 96001 Zvolem, Slovakia  
Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia  
P.O. Box 1614, Alberton, 1450, South Africa  
Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain  
Mezzanine Floor, The Landmark 385, Galle Road, Colombo - 3, Sri Lanka  
Almedalsvagen 4, Gotenborg 402-23, Sweden  
Bofex  
Coherent Imports (PTY) Ltd.  
Marantz Spain  
The listening Room  
Audio Nord  
SRI LANKA  
SWEDEN  
SWITZERLAND  
SYRIA  
TAHITI  
TAIWAN  
THAILAND  
TUNESIA  
TURKEY  
U.K.  
U.S.A.  
YUGOSLAVIA  
Sound Company AG  
Hamzeh & Partners  
Covecolor  
Pai-Yuing Co. Ltd.  
MRZ Standard Co. Ltd.  
Societe EDEVIG  
Postfach, 8010 Zürich, Switzerland  
Hafez Ibrahim Str. No 117, Damascus Shalan, Syria  
Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti  
6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C.  
746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand  
40, Avenue du Golfe Arabe, El Menzah, 1004, Tunesia  
Yukari Dudullu Organize sanayi Bolgesi, 2.Cadde no.28, 81260 Umraniye-Istanbul, Turkey  
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.  
1100 Maplewood Drive Itasca, IL 60143, U.S.A.  
Türk Philips Ticaret A.S.  
Marantz Hifi UK Ltd.  
Marantz America Inc.  
ITM Company  
Omladinskih Brigada 86, 11070 Belgrade, Yugoslavia  
EXPORT  
Marantz Domestic Sales  
A division of Marantz Europe BV,Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands  
is a registered trademark.  
02/02 MITs 01AK851250  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Life Fitness Home Gym TIP030001 User Manual
Lincoln Automobile 2009 Navigator User Manual
Lyngdorf Audio Stereo Amplifier CEC2008 User Manual
Manitowoc Ice Ice Maker K00022 User Manual
M Audio Musical Instrument M71020QS EN User Manual
Maverick Ventures Meat Grinder MM 5501 User Manual
Maytag Clothes Dryer MD 16 User Manual
Melissa Coffeemaker ME2TMBCHR User Manual
Memorex MP3 Player MD6459 User Manual
Memorex MP3 Player MMP8570 User Manual