KFC and Taco Bell Logo Application Instructions
Manitowoc Models S600C, S1470C
These instructions will help the location manager or machine installer to correctly center the urethane logo on the front panel of the
Manitowoc ice machine.
Tools Needed:
Philips head screw driver
Contents of Kit:
Small packet containing alcohol prep pad
Urethane logo
L-shaped static cling template
MODELS - SY1474C or SD1472C
MODEL - SY0674C or SD0672C
Follow these instructions to remove the ice machine front panel
from the machine.
Follow these instructions to remove the left section of the ice
machine front panel from the machine.
(1) If your machine is on a drink dispenser, remove the drink
dispenser ice bin cover.
(1) If your machine is on a drink dispenser, remove the drink
dispenser ice bin cover.
(2) Remove the Philips head screw from lower section of the
front panel.
(3) Depress pin to release front panel.
(2) Remove the Philips head screw from lower section of the front
panel.
(3) Pull front panel away from machine while lifting slightly.
Pictured: S600C
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
000002851
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
Rev 01
5/25/10
Download from Www.Somanuals.com. All Manuals Search And Download.
8. When the semi-transparent masking and logo are in place,
apply pressure against the top of the masking, working
out any visible air bubbles. Remove the semi-transparent
logo masking very slowly, allowing only the urethane
logo to remain in the space within the template frame. As
the semi-transparent masking is pulled back, make sure
no stray pieces of urethane logo remain attached to
the semi-transparent masking. If this occurs, slowly
lower the masking and press firmly against it to make
sure the remaining piece sticks to the stainless steel.
9. Remove the template from the surface of the stainless
steel front panel.
10. Reattach the stainless steel front panel to the ice machine.
11. If the machine is on a beverage dispenser, re-attach the
drink dispenser ice bin cover.
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
000002851
Rev 01
5/25/10
Download from Www.Somanuals.com. All Manuals Search And Download.
|