Magnavox TV DVD Combo 32MD350B User Manual

User manual  
Manuel de l’utilisateur  
Guía del usuario  
37MD350B  
32MD350B  
LCD TV/DVD  
1-866-341-3738  
1-866-341-3738  
1-866-341-3738  
Quick Use Guide Inside!  
HIGH-DEFINITION TELEVISION  
Guide d’usage Rapide Incluse!  
®
Guía de Uso Rápido Incluida!  
MODEL NUMBER  
SERIAL NUMBER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
16  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
Tilt/Stability - All televisions must comply with  
recommended international global safety standards for tilt  
and stability properties of its cabinet design.  
• Do not compromise these design standards by applying  
excessive pull force to the front, or top, of the cabinet  
which could ultimately overturn the product  
Also, do not endanger yourself, or children, by placing  
electronic equipment/toys on the top of the cabinet Such  
items could unsuspectingly fall from the top of the set and  
cause product damage and/or personal injury.  
Wall or Ceiling Mounting - The appliance should be  
mounted to a wall or ceiling only as recommended by the  
manufacturer  
5. Do not use this apparatus near water  
6. Clean only with a dry cloth  
7. Do not block any of the ventilation openings.  
Install in accordance with the manufacturer’s instructions  
8. Do not install near any heat sources such as radiators, heat  
registers stoves, or other apparatus (including amplifiers)  
that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and third grounding prong. The wide blade or third  
prong are provided for your safety When the provided  
plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10 Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
17  
18  
19  
Power Lines - An outdoor antenna should be located away  
from power lines  
Outdoor Antenna Grounding - If an outside antenna is  
connected to the receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage  
surges and built up static charges.  
Section 810 of the National Electric Code, ANSI/NFPA  
No. 70-1984, provides information with respect to proper  
grounding of the mast and supporting structure, ground-  
ing of the lead-in wire to an antenna discharge unit, size of  
grounding connectors, location of antenna-discharge unit  
connection to grounding electrodes, and requirements for  
the grounding electrode. See Figure below  
Object and Liquid Entry - Care should be taken so that  
objects do not fall and liquids are not spilled into the enclo-  
sure through openings.  
Battery Usage CAUTION - To prevent battery leakage  
that may result in bodily injury, property damage, or  
damage to the unit:  
Install all batteries correctly, with + and - aligned as  
marked on the unit.  
• Do not mix batteries (old and new or carbon and  
alkaline, etc.)  
• Remove batteries when the unit is not used for a long  
time  
11 Only use attachments/accessories specified by the  
manufacturer  
12  
Use only with a cart, stand tripod, bracket, or table  
specified by the manufacturer, or sold with the appara-  
tus. When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip-over  
20  
21  
13 Unplug this apparatus during lightning storms or when un-  
used for long periods of time  
14 Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way  
such as power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into apparatus, the appara-  
tus has been exposed to rain or moisture, does not operate  
normally, or has been dropped  
15 Damage Requiring Service - The appliance should be  
serviced by qualified service personnel when:  
A. The power supply cord or the plug has been damaged;  
B. Objects have fallen, or liquid has been spilled into the  
appliance;  
C. The appliance has been exposed to rain  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance;  
E. The appliance has been dropped, or the enclosure dam-  
aged.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
NTRODUCTION  
I
Precaution  
LASER SAFETY  
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due  
to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in  
hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates  
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this  
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited  
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
• Do not handle the AC power cord with wet hands.  
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.  
• Do not put your fingers or objects into the unit.  
LOCATION AND HANDLING  
Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.  
Avoid a place with drastic temperature changes.  
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is  
placed too close to them. In this case, please ensure enough space between the external devices and the unit.  
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.  
Be sure to unplug the AC power cord from the AC outlet before carrying the unit.  
DEW CONDENSATION WARNING  
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few  
hours until its inside gets dry.  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
NOTE ABOUT RECYCLING  
• This unit’s packaging materials are recyclable and can be reused.  
Please dispose of any materials in accordance with your local recycling regulations.  
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
WHEN CARRYING THIS UNIT  
At least 2 people are required when carrying this unit.  
Make sure to hold the upper and bottom frames of the TV firmly as illustrated.  
Trademark Information  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing  
LLC in the United States and other countries.  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.  
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us  
all save money and protect the environment through energy efficient products and practices.  
Consumer Notice:  
This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home  
mode settings. Changing or enabling other features in this TV (e.g. brightened backlighting) will possibly increase energy  
consumption beyond the original ENERGY STAR® qualified limits.  
is a trademark of DVD Format/Logo Licensing Corporation.  
The America
n Academy of Pediatrics discourages television viewing for children younger than two years of age.  
Symbols Used in this Manual  
The following is the description for the symbols used in this manual. Description refers to:  
TV FUNCTIONS  
DVD FUNCTIONS  
TV  
DVD  
CD  
: Analog TV operation  
: Playback of DVD-video  
DTV  
: Digital TV operation  
: Playback of audio CD  
• If neither symbol appears under the function heading,  
operation is applicable to both.  
• If neither symbol appears under the function heading,  
operation is applicable to both.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
NTRODUCTION  
I
Supplied Accessories  
user manual  
(1EMN25919)  
quick start guide  
remote control  
(NF801UD)  
registration card  
(1EMN24699)  
For 37MD350B only  
AC power cord  
For 37MD350B  
(1EMN25960)  
For 32MD350B  
(1EMN25920)  
(WAV0162LW001) or  
(WAV0162LTE03) or  
(WAV152ZHN001)  
batteries  
(AAA, 1.5V x 2)  
screw kit for attaching the stand  
For 37MD350B 3 screws (1ESA20208)  
For 32MD350B 4 screws (1ESA19508)  
If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free  
customer support line found on the cover of this manual.  
Attaching the Stand  
You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction.  
Spread a thick and soft cloth over a  
table as shown below.  
Place the main unit face down onto it.  
Make sure not to damage the screen.  
At least 2 people are required at this  
step.  
Align the 2 stand hooks with the two  
hooks under the bottom of the main  
Drive Phillips pan screws in  
threaded holes at the bottom of the  
stand until they are tight.  
1
2
3
unit (shown by arrow ), then slide  
the stand in the direction as shown  
by arrow until it stops and the  
mounting holes are aligned.  
For 32MD350B  
Make sure not to put the AC power  
cord between the stand and the unit.  
To re
move the stan
d
fro
m
this
u
nit  
Unscrew the Phillips pan screws on step 3  
After the screws are removed pull the stand up toward the rear of the unit. Be careful not to drop the stand when you remove it.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Features  
TV  
DVD  
DTV/TV/CATV  
• Dolby Digital Sound  
- You can use your remote control to select  
channels which are broadcast in digital format and  
conventional analog format. Also, cable subscribers  
can access their cable TV channels.  
• Information Display (DTV only)  
- You can display the title, contents and other  
information of the current DTV program on the TV  
screen.  
- Enjoy Dolby Digital multi-channel surround sound  
when you connect the unit to your Dolby Digital  
decoder.  
• Still / Fast / Slow / Step Playback  
- Various playback modes are available including still  
pictures, fast forward/reverse, slow motion and step  
frames.  
• DVD Menus in a Desired Language  
- You can display DVD menus in a desired language, if  
available on a DVD-video.  
• Autoprogram  
- This unit automatically scans and memorizes  
channels available in your area, eliminating difficult  
setup procedures.  
• Auto Power Off  
- If there is no operation for 20 minutes, the unit will  
turn itself off automatically.  
• Child Lock  
- This feature allows you to block children’s access to  
inappropriate programs.  
• Parental Lock  
- Block the viewing of a DVD-video unsuitable for  
children.  
• Closed Caption Decoder  
- Built-in closed caption decoder displays text for  
closed caption supported programs.  
• MTS/SAP Tuner  
• Resume Playback  
- Lets you resume playback from the point at which  
playback was stopped.  
- Audio can be selected from the remote control.  
• Auto Shut Off Function  
• Bit Rate Indication  
• DRC (dynamic range control)  
- You can control the range of sound volume.  
- If there is no signal input from the antenna terminal  
and no operation for 15 minutes, the unit will turn  
off automatically.  
Accessing from [MODE] button  
During playback  
• Sleep Timer  
- This feature will automatically turn off the power of  
the unit at a specific time.  
• Subtitles in a Desired Language  
- You can select a desired language for displaying  
subtitle, if that language is available on a DVD-video.  
• Selecting a Camera Angle  
- You can select the desired camera angle, if a DVD  
contains sequences recorded from different angles.  
• Zoom  
• Choices for On-screen Language  
- Select your on-screen language:  
English, Spanish or French.  
• Stereo Sound Function  
• PLL Frequency Synthesized Tuning  
- Provides free and easy channel selection and lets  
you tune directly to any channel using the number  
buttons on the remote control.  
- Allows you to enlarge the size of picture image.  
• Black Level Adjustment  
• Virtual Surround  
• Search  
• Various Adjustment for Picture and Sound  
- Customizes image quality to suitable for your room  
and sets the sound as your preference.  
• HDMI Input  
- chapter search / title search / track search / time  
search  
• Marker  
- When using HDMI1 Input, you can enjoy this unit  
as a PC monitor if your PC has DVI output terminal.  
• Component video Input  
- The part on the disc designated by user can be  
called back.  
• Repeat  
- chapter / title / track / all / A-B  
• S-Video Input  
• AV Input  
Digital audio Output  
Accessing from [MODE] button  
• Analog audio Output  
In stop mode  
• Program Playback for audio CD  
- You can program the order of tracks to play them  
back in designated order.  
• Random Playback for audio CD  
- This unit can shuffle the order of tracks to play them  
back in randomly.  
Accessing from [SAP/AUDIO] button  
During playback  
• Choices for Audio Language and Stereo Sound  
Function  
- Select your desired languages or stereo sound  
function when different options are available on  
your disc.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
NTRODUCTION  
I
Contents  
Important Safety Instructions
 
. . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
DVD Functions  
INTRODUCTION  
OPERATING DVD  
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Supplied Accessories
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Attaching the Stand
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Control Panel 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Terminals .
 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Playable Media  
37  
37  
38  
38  
38  
38  
39  
39  
39  
40  
41  
42  
42  
42  
43  
43  
Unplayable Media  
Playback  
Disc Menu  
Resume Playback  
Paused and Step-by-step Playback  
Fast Forward / Fast Reverse  
Slow Forward / Slow Reverse  
Zoom  
Search Functions  
Repeat Playback  
Repeat A-B Playback  
Random Playback  
Programmed Playback  
On-screen Display  
Special Settings  
PREPARATION  
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Connection to Cable Receiver or Satellite Box . . . . . . . . . .12  
External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Plug In the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
DVD SETTING  
DVD Language Setting  
DVD Audio Setting  
Parental Setting  
TV Functions  
46  
47  
48  
49  
50  
50  
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Others  
WATCHING TV  
Reset to the Default Setting  
Language Code List  
TROUBLESHOOTING  
Channel Selection  
18  
Volume Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Sleep Timer  
18  
19  
19  
Still Mode  
FAQ  
51  
52  
Switching Each Input Mode  
Switching Audio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
TV Screen Information  
TV Screen Display Mode  
OPTIONAL SETTING  
Troubleshooting Guide  
INFORMATION  
20  
21  
Glossary  
54  
54  
55  
55  
55  
Maintenance  
General Specifications  
Electrical Specification  
Other Specifications  
Main Menu  
22  
22  
23  
23  
24  
24  
Autoprogram  
Channel List  
Add Channels  
Limited Warranty  
56  
Antenna Confirmation  
Language Selection  
Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Sound Adjustment  
Closed Caption  
Child Lock  
26  
27  
30  
34  
35  
35  
PC Settings  
Energy Saving Mode  
Location  
Current Software Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
© 2010 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in  
any storage medium, in any form or for any purpose without the express prior written consent of Funai.  
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.  
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the  
obligation to notify any person or organization of such changes.  
with the  
design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written  
consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this  
manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein.  
Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property  
rights to the fullest extent of the law.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
y POWER (p. 17)  
Press to turn the unit on and off.  
2. B (play) (p. 38)  
Control Panel  
Press to begin the disc playback.  
3.
C (stop) (p. 38)  
Press to stop the disc playback.  
4.  
A
(eject) (p. 38)  
Press to eject the disc.  
5. CHANNEL 
+
/ (p. 18 / p. 19)  
Press to select channels or move up (
+
) / down (  
through the main menu items.  
)
6. MENU
 
(p. 17 / p. 46)  
Press to display the main menu.  
7. VOLUME + / (p. 18)  
8
9
10  
11  
Press to adjust the volume or move right (
+
) / left  
(
) through the main menu items.  
8. Infrared sensor Window  
Receives infrared rays transmitted from the remote  
control.  
-
CHANNEL  
POWER  
-
VOLUME +  
MENU  
+
9. POWER ON indicator  
Lights up green when power is on.  
10. STAND BY indicator  
Lights up red when power is off.  
11. DVD indicator  
7
6
5
4
3
2
1
Lights up orange when the disc is inserted.  
[Side Panel]  
12. Disc loading slot (p. 38)  
Terminals  
Insert the disc with the label side facing forward.  
13. S-Video Input jack (p. 14)  
12  
S-Video cable connection from an external device.  
14. Video Input jack (p. 15)  
13  
14  
Video cable connection from an external device.  
15. Audio Input jack (p. 14 / p. 15)  
Audio cable connection from an external device.  
16. HDMI 2 Input jack (p. 12 / p. 13)  
HDMI connection from HDMI device.  
15  
[Rear Panel]  
16  
17. AC power cord (AC power cord Inlet for 37MD350B)  
(p.16)  
Connect the supplied AC power cord for a standard  
AC outlet.  
17  
*
18. Cable management (p. 16)  
Use this holder to bundle the cables.  
19.
Component video and Audio Input jack (p.12 / p.14)  
Component video cable and audio cable  
connection from an external device.  
20. Audio Output jack (p. 15)  
18  
19  
Audio cable connection for an external device.  
21. Audio Input jack for HDMI 1 (p. 13 / p. 16)  
Audio cable connection from a DVI device.  
When you connect your PC that has a DVI terminal,  
use a stereo mini plug conversion cable as well.  
(For HDMI 1 Input jack only)  
24  
25  
37MD350B  
20  
21  
only  
22. Digital audio Output jack (p. 15)  
Coaxial digital cable connection for a decoder or an  
audio receiver.  
22  
23  
23. Antenna Input jack (p. 12)  
RF coaxial cable connection for your antenna or cable  
TV signal.  
Note:  
24. HDMI 1 Input jack (p. 12 / p. 13 / p. 16)  
HDMI connection for HDMI or DVI device.  
When you connect your PC that has a DVI terminal,  
you can enjoy this unit as a PC monitor.  
service terminal (service use only)  
*
• Use this terminal only when a software update is necessary.  
• User should not connect any devices to the service terminal such  
as digital camera, keyboard, mouse, etc. (because these will not  
work).  
• The software update is, in most cases, handled by an authorized  
service person or in some circumstances the user may be asked  
to do the software upgrade themselves.  
[37MD350B only]  
25. HDMI 3 Input jack (p. 12 / p. 13)  
9
Download from Www.Somanuals.com. All MHanDuMalsI
c
S
o
enarnc
e
h
c
A
t
ni
o
dnD
f
orw
o
nmloaHdD.
MI device.  
EN  
NTRODUCTION  
I
Remote Control Function  
1. y (power) (p. 17)  
Press to turn the unit on and off.  
2. SLEEP (p. 18)  
Press to activate the sleep timer.  
3. SOURCE (p. 19)  
Press to access connected external devices  
like a BD/DVD recorder.  
4. SAP/AUDIO (p. 7 / p. 19 / p. 44)  
1
2
3
16  
17  
18  
4
19  
5
6
7
Digital mode (DTV)  
• Press to select the audio language.  
Analog mode (TV)  
20  
• Press to select the audio mode.  
DVD mode  
• Press to select the audio language (DVD), or  
sound mode (CD).  
5. MODE (p. 7)  
8
9
21  
• Press to arrange the playing order or  
playback randomly (CD).  
• Press to set the black level (DVD) and  
the virtual surround on or off.  
• Press to change the camera angle to see the  
sequence being played back from different  
angle (DVD).  
10  
22  
12  
23  
24  
10  
11  
12  
13  
14  
25  
• Press to search chapter, title (DVD),  
track (CD) or time.  
• Press to set the marker.  
• Press to repeat playback chapter, title (DVD),  
track, disc (CD) repeatedly or between  
designated point A and B.  
15  
• Press to magnify the part of picture  
(2x and 4x : DVD).  
• Press to select the subtitles on a disc (DVD).  
6. MENU (p. 17 / p. 46)  
26  
Press to display the main menu.  
K
L
7.  
s
/
B
/
/
(cursor) (p. 17)  
Press to move left / right / up / down through  
the items.  
8. OK (p. 17)  
Press to decide the command of setting when  
the main menu is displayed.  
9. BACK (p. 20)  
Press to return to the previous menu operation.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
20. FORMAT (p. 21)  
10. REV E / FWD D (p. 39)  
Press to begin slow forward or slow reverse  
playback during the pause mode (DVD) and  
search forward or backward through a disc.  
11. PLAY B (p. 38)  
Press to select aspect ratio available for  
the TV screen.  
21. INFO (p.20 / p.43)  
Digital mode (DTV)  
• Press to display the channel information,  
signal type and TV setting.  
Analog mode (TV)  
• Press to display the channel number,  
signal type and TV setting.  
External input mode  
Press to begin the disc playback.  
12. SKIP H / G (p. 40)  
Press to skip forward or backward chapters, titles  
(DVD) or tracks (CD).  
13. PREV CH (p. 18)  
Press to return to the previous channel.  
• Press to display the external input modes,  
signal type and TV setting.  
DVD mode  
14. VOL 
+ /
 
(p. 18)  
Press to adjust the volume.  
15. Number buttons (p. 18)  
• Press to display the current status.  
22. PAUSE F (p. 38)  
DVD mode  
• Press to pause the disc playback.  
23. STOP C (p. 38)  
Press to stop the disc playback.  
24. MUTE (p. 18)  
• Press to select channels.  
• Press to select chapter, title (DVD), or track (CD)  
directly.  
(dot)  
• Press to shift the subchannel from the main  
channel.  
+10 button  
Press to turn the sound on and off.  
25. CH + / (p. 18 / p. 19)  
Press to select channels and the  
external input modes.  
• Press to select 10 or higher number of chapters.  
16. FREEZE (p. 19)  
TV mode  
• Press to pause screen image.  
26. CLEAR (p. 41)  
17. EJECT  
Press to eject the disc.  
18. DISC MENU (p. 38)  
Press to display the menu on a disc.  
19. TITLE (p. 38)  
A
(p. 38)  
• Press to clear the numbers entered incorrectly.  
• Press to cancel the point A for A-B repeat.  
• Press to remove the track number in program  
input (CD).  
Press to display the title menu (DVD).  
Installing the Batteries  
Install the batteries (AAA, 1.5V x 2) matching the polarity indicated inside battery compartment of the remote control.  
Battery Precautions:  
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.  
• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or  
old batteries with fresh ones.  
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.  
• Do not try to recharge batteries; they can overheat and rupture.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
REPARATION  
P
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.  
Before you connect...  
Be sure your antenna or other device is connected properly before plugging in the AC power cord.  
Antenna Connection  
Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.  
rear of this unit  
e.g.)  
VHF / UHF  
antenna  
RF coaxial cable  
or  
cable TV signal  
* Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit  
to memorize all available channels in your area. Refer to “Initial Setup” on page 17.  
Note:  
• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local  
electronics store for these items.  
• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.  
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than  
settop versions.  
• To switch your reception source easily between antenna and cable, install an antenna selector.  
• If you are not receiving a signal from your cable service, contact the Cable provider.  
Connection to Cable Receiver or Satellite Box  
Use an HDMI or an component video cable to connect the HDMI or the Component video Input jack of the unit to the  
HDMI or the component video output jack of the cable receiver / satellite box.  
If you connect to the unit’s Component video Input jack, connect audio cables to the Audio L/R jacks below the  
Component video connector.  
HDMI cable  
HDMI OUT  
e.g.)  
side or  
rear of this unit  
satellite dish  
or  
or  
AUDIO OUT  
COMPONENT VIDEO OUT  
L
R
Y
Pb/Cb  
Pr/Cr  
ANT IN  
RF coaxial  
cable  
(green) (blue)  
(red)  
(green)  
or  
(blue)  
(red)  
or  
cable TV signal  
including PPV  
STEREO  
PCM  
37MD350B only  
cable receiver / satellite box  
component video cable  
and audio cable  
* You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video  
output jack because they might have different output jacks.  
* Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the  
clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable /  
satellite provider.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.  
External Device Connection  
[HDMI Connection]  
HDMI connection offers the highest picture quality.  
HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio  
through a single cable.  
side or  
rear of this unit  
e.g.)  
HDMI cable  
HDMI OUT  
TITLE  
5
CHAPTER 15  
REPEAT A-B  
BD/DVD recorder  
with the HDMI output jack  
or  
or  
37MD350B only  
Note:  
• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.  
• This unit accepts only 2 channel audio signal (LPCM).  
• You need to select “PCM” for the digital audio of the device you connected or check the HDMI audio setting.  
There may be no audio output if you select “Bitstream, etc.  
• This unit only accepts signals in compliance with EIA861.  
[HDMI-DVI Connection]  
Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.  
e.g.)  
HDMI-DVI  
conversion cable  
DVI OUT  
rear of this unit  
STEREO  
PCM  
AUDIO OUT  
To HDMI1  
Input jack only  
L
R
cable receiver or satellite box  
with the DVI output jack  
37MD350B only  
audio cable  
Note:  
• This unit accepts 480i / 480p / 720p / 1080i video signals.  
• HDMI-DVI connection requires separate audio connections as well.  
• Audio signals are converted from digital to analog for this connection.  
• DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
REPARATION  
P
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
[Component video Connection]  
Component video connection offers better picture quality for video devices connected to the unit.  
If you connect to the unit’s Component video Input jack, connect audio cables to the Audio L/R jacks below the  
Component video connector.  
e.g.)  
component video cable  
rear of this unit  
(green)  
(blue)  
(red)  
(green)  
(blue)  
(red)  
Y
Pb/Cb  
Pr/Cr  
COMPONENT VIDEO OUT  
TITLE  
5
CHAPTER 15  
REPEAT A-B  
AUDIO OUT  
L
R
BD/DVD recorder with  
the component video output jack  
audio cable  
Note:  
• This unit accepts 480i / 480p / 720p / 1080i video signals.  
[S-Video Connection]  
S-Video connection offers good picture quality for video devices connected to the unit.  
If you connect to the unit’s S-Video Input jack, connect audio cables to the Audio L/R jacks below the Video connector.  
e.g.)  
side of this unit  
S-VIDEO  
OUT  
AUDIO OUT  
S-Video cable  
L
R
TITLE  
5
CHAPTER 15  
REPEAT A-B  
BD/DVD recorder with  
the S-Video output jack  
audio cable  
Note:  
• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
[Video Connection]  
Video connection offers standard picture quality for video devices connected to the unit.  
If you connect to the unit’s Video Input jack, connect audio cables to the Audio L/R jacks below the Video connector.  
When the audio jack of the video device is monaural, connect an audio cable to the Audio L Input jack.  
e.g.)  
side of this unit  
AUDIO OUT  
VIDEO  
OUT  
L
R
video cable  
video game  
camcorder  
STAND-BY  
STEREO  
VCR  
audio cable  
Note:  
• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.  
[Audio Output Connection]  
Digital (for digital broadcasting and DVD functions only)  
If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital  
broadcasting sound.  
Use a digital audio coaxial cable to connect the unit to external digital audio devices.  
Analog (for both analog and digital broadcasting)  
If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio.  
Use an audio cable to connect the unit to external analog audio devices.  
e.g.)  
AUDIO IN  
L
R
stereo system  
audio cable  
or  
DIGITAL AUDIO  
COAXIAL IN  
rear of this unit  
digital audio coaxial cable  
Dolby Digital  
decoder  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
REPARATION  
P
No supplied cables are used in this connection:  
Please purchase the necessary cables at your local store.  
[PC Connection]  
This unit can be connected to your PC that has a DVI terminal.  
Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well.  
If you connect this unit to your PC, you can use this unit as a PC monitor.  
e.g.)  
stereo mini plug  
conversion cable  
rear of this unit  
To HDMI1  
Input jack only  
HDMI-DVI  
conversion cable  
DVI OUT  
37MD350B only  
personal computer  
HDMI-DVI conversion cable  
should be with ferrite core.  
The following signals can be displayed:  
Format  
VGA  
Resolution  
640 x 480  
800 x 600  
1,024 x 768  
Refresh rate  
Format  
Resolution  
Refresh rate  
60Hz  
60Hz  
60Hz  
1,280 x 768  
60Hz  
SVGA  
XGA  
WXGA  
1,360 x 768  
60Hz  
Other formats or non-standard signals will not be displayed correctly.  
Note:  
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.  
• The following operations may reduce noise.  
- Attach a ferrite core to the AC power cord of your PC.  
- Unplug the AC power cord and use the built-in battery of your PC.  
Cable Management  
Plug In the AC Power Cord  
Make sure that the AC power cord must be plugged  
to an AC outlet after all the necessary connections are  
Keep the cables through this holder to avoid tangle  
them.  
rear of this unit  
completed.  
rear of this unit  
37MD350B  
AC outlet  
AC power cord  
rear of this unit  
* For 32MD350B, nonremovable AC power cord is already  
fixed on the unit.  
32MD350B  
Caution:  
Do not connect the AC power cord to a power supply outside  
the indicated voltage of this unit (AC 120V).  
Connecting the AC power cord to a power supply outside of  
this range may result in fire or electrical shocks.  
Note:  
• Each time you plugged in the AC power cord, any operations  
will not be performed for a few seconds.  
This is not a malfunction.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.  
TV Functions  
Initial Setup  
This section will guide you through the unit’s initial setting which includes  
selecting a language for your on-screen menu and autoprogram, which  
automatically scans and memorizes viewable channels.  
Use [Cursor  
then press [OK]  
s
/
B] to select the desired location setting,  
4
Initial Setup  
Before you begin:  
Select “Retail” or “Home” for your location.  
Make sure the unit is connected to antenna or cable.  
After making all the necessary connections,  
press [y (power)] to turn on the unit.  
1
Retail  
Home  
OK  
Select  
OK  
Select ”Retail”, the unit will be set up with predefined  
setting for retail displays. In this setting, the power  
consumption may possibly exceed the limited  
requirement of the ENERGY STAR® qualification.  
• Select ”Home”, the unit is set to maximize the energy  
efficiency for home setting and it can be adjusted  
through a choice of picture and sound quality  
according to your preference.  
When the initial setup is completed, the lowest  
memorized channel with the confirmation message  
of the location setting will be displayed on the TV  
screen.  
This operation may take a few moments.  
K
L
Use [Cursor  
/
] to select the on-screen language  
2
3
from the choices on the right side of the TV screen.  
(English / Español / Français)  
Initial Setup  
Select the language for setup display.  
Elija el idioma de ajuste.  
English  
Español  
Français  
Sélectionner langue écran config.  
MENU  
OK  
Select  
OK  
Skip  
Note:  
• If you are not receiving a signal from your cable service,  
contact the Cable provider.  
“Initial Setup” menu on step 3 will be displayed in the  
selected language after you press [OK]  
• If you press [y (power)] or [MENU] during autoprogram,  
this setting will be canceled.  
• The initial autoprogram function can be executed for  
either “Antenna” or “Cable” only once. When you change  
the connection (Antenna / Cable), set autoprogram again.  
Refer to page 22.  
K
L
Use [Cursor  
/
] to select “Antenna” for TV channels  
or “Cable” for CATV channels, then press [OK]  
• If there is no signal input from the antenna terminal and  
no operation for several seconds after you turn on the unit,  
“Helpful Hints” appears. Follow the instructions listed on  
the TV screen.  
Initial Setup  
Make sure the antenna is connected to ''ANT. IN'' jack.  
Select your signal source.  
Antenna  
Cable  
Skip  
Initial Setup  
Antenna  
Cable  
Retry  
Or  
No channel is registered.  
Try Autoprogram again?  
Later  
ANT.IN  
Verify that you have a cable connected to the "ANT. IN" jack on the  
back of the TV, the channel installation process searches this  
connection. If you are using a cable or satellite box, please confirm  
the input which you have connected the box and press "SOURCE"  
key on the remote control to select the appropriate source input.  
BACK  
MENU  
OK  
Select  
OK  
Back  
Skip  
MENU  
OK  
Select  
OK  
Skip  
• “Autoprogramwill begin.  
• You must set ”Home” in step 4. Otherwise, the settings  
of picture and sound quality you adjusted will not be  
memorized after you turn off the unit.  
Initial Setup  
Now the system is scanning for channels, please wait.  
Auto programming will take up to 20 minutes to complete.  
0%  
After an initial setup is completed...  
Analog channels  
Digital channels  
0ch  
0ch  
If you want to scan the channels automatically again,  
refer to “Autoprogram” on page 22.  
MENU  
Skip  
• You can add the desired channels unmemorized by  
“Autoprogram. Refer to “Add Channels” on page 23.  
• If you want to change to another language, refer to  
“Language Selection” on page 24.  
If you want to change the location setting, refer to  
“Location” on page 35.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ATCHING TV  
W
Channel Selection  
Volume Adjustment  
Select channels by using [CH
+
/ ] or [the Number buttons]  
This section describes how to adjust the volume. The mute function, which  
turns the sound off and on, is also described.  
• To select the memorized channels, use [CH
+
/ ] or  
[the Number buttons].  
• To select the non-memorized channels, use  
[the Number buttons]  
Use [VOL
+
/ ] to adjust the audio volume.  
To Use [the Number buttons]  
TV  
Volume  
30  
- When selecting analog channel 11  
The volume bar will be displayed at the bottom of the  
TV screen when adjusting the volume.  
DTV  
The volume bar will automatically disappear in a few  
seconds.  
When selecting digital channel 11.1  
Be sure to press [ ] 
before  
entering the subchannel number.  
Press [MUTE] to turn off and on the sound.  
Mute  
• Press [PREV CH] to return to the previously viewed  
channel.  
About digital TV broadcasting:  
“Mute” is displayed on the TV screen for a few seconds.  
With its high definition broadcast, digital broadcasting  
far surpasses analog broadcasting in both its picture  
and sound quality. Not all digital TV broadcasts are high  
definition (HD). To confirm whether your watching TV  
program is in HD, refer to the program guide, contact  
your cable / satellite provider or local TV stations.  
Press [MUTE] again or [VOL
+
/ ] to recover the  
original volume.  
Sleep Timer  
The sleep timer can be set to automatically turn off the unit after an  
incremental period of time.  
(anaNloTgSmCode)  
ATSC  
Air time  
(digital mode)  
6:00pm  
(Soccer)  
(Soccer)  
CH4  
CH4-1  
Press
[SLEEP] to set the sleep timer.  
1
main channel  
Sleep  
Off  
6:30pm  
(Soccer)  
(Soccer)  
(News)  
(Tennis)  
CH4  
CH4-1  
CH4-2  
CH4-3  
Sleep timer display appears on the TV screen.  
main channel  
subchannel  
subchannel  
7:00pm  
7:30pm  
(Soccer)  
(Soccer)  
CH4  
CH4-1  
Press
[SLEEP] repeatedly to change the amount of time  
until shut off.  
2
main channel  
(News)  
CH4-2  
(Soccer)  
(Soccer)  
CH4  
CH4-1  
Sleep  
120min.  
main channel  
subchannel  
You can set your unit to turn off after a set period of  
time (from 30 to 120 minutes).  
8:00pm  
can be changed by using [CH + /  
]
W
hat is the s
u
bchannel?  
Each press of [SLEEP] will increase the time by 30  
minutes.  
After setup, the sleep timer display can be called up  
for checking by pressing [SLEEP]  
By using high compression technology, digital  
broadcasting offers a service that enables multiple  
signals to send simultaneously.  
Therefore, you can select more than one program per  
main channel since digital broadcasting technology  
distinguishes between multiple channels broadcast by  
a single network.  
To cancel the sleep timer  
Press [SLEEP] repeatedly until “Sleep Off” is displayed  
on the TV screen.  
Note:  
Note:  
• The sleep timer display will automatically disappear in a  
few seconds.  
• “No Signal” will appear on the TV screen after the  
subchannel broadcast is over.  
• When you disconnect the unit from the AC outlet or when  
a power failure occurs, the sleep timer setting will be  
canceled.  
• “Audio only program“ message will appear on the TV  
screen, when you receive only sound signal.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Still Mode  
Switching Audio Mode  
You can pause the image shown on the TV screen.  
This section describes how to switch the audio in the analog mode and how  
to switch the audio language in the digital mode.  
TV  
Press [FREEZE] to pause the image shown on the TV  
screen.  
Press [SAP/AUDIO] to display the currently selected  
audio mode. While receiving an MTS broadcast,  
press repeatedly to cycle through the available audio  
channel.  
FREEZE  
11  
SAP / STEREO  
The sound output will not be paused.  
If no signal is detected or protected signal is received  
during still mode, the image remains paused and the  
sound output will be muted.  
When all audio are available  
SAP / STEREO  
SAP / MONO  
The still function will be released after 5 minutes.  
SAP / STEREO  
When stereo and monaural audio are available  
MONO / STEREO MONO / STEREO  
When SAP and monaural audio are available  
SAP / MONO SAP / MONO  
To cancel still mode, press any button except  
[y (power)]  
When only monaural audio is available  
Switching Each Input Mode  
You can easily switch with the remote control between TV (ATSC or NTSC)  
and external devices when they are connected to the unit.  
MONO  
(cannot be switched)  
STEREO  
SAP  
MONO  
: Outputs stereo-audio  
: Outputs second audio program  
: Outputs mono-audio  
Press [SOURCE] or [CH
+
] repeatedly to cycle through  
the input modes.  
37MD350B  
32MD350B  
DTV  
Press [SAP/AUDIO] to display the currently selected  
language and the number of available languages.  
1
2
11.1  
English 1/3  
Press [SAP/AUDIO] repeatedly to cycle through the  
available audio languages.  
DTV/TV channel  
DTV/TV channel  
Video  
Video  
Component  
HDMI1  
Component  
HDMI1  
Available languages differ depending on the  
broadcast. “Other” is displayed when the audio  
language cannot be acquired, or the acquired  
languages are other than English, Spanish or French.  
(or PC input)  
(or PC input)  
HDMI2  
HDMI3  
HDMI2  
Note:  
[SAP/AUDIO] does not control external audio devices.  
• The information display will automatically disappear in a  
few seconds.  
Pressing [CH ] reverses the direction of the input  
modes.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ATCHING TV  
W
TV Screen Information  
You can display the currently selected channel or other information such as  
the audio mode on the TV screen.  
DTV  
TV  
In the digital mode, the detailed broadcasting information for the current  
channel such as program title, program guides are displayed.  
In the analog mode, the current channel number and the audio mode are  
displayed.  
Press [INFO] to display the details of the currently  
selected program.  
Press [INFO]  
11  
SAP / STEREO  
480i SD  
SD  
4:3  
CC  
TV-PG DLSV CC  
Broadcasting information  
The following information is displayed.  
1
2
3
4
• The current channel number, audio mode, type of  
resolutions for video signal, TV aspect ratio, CC and  
TV program rating are displayed on the top-right  
corner of the TV screen.  
• To clear the display, press [INFO] again. You can also  
press [BACK]  
A Day of Memories  
KABC  
11.1  
English 1/2  
5
A quarter-century ago,which may now qualify as the  
good old days of newspapering,run-of-paper sales  
accounted for 80 percent of the industry's advertising  
revenues.Department stores and supermarket were  
1080i HD  
16:9  
16:9  
6, 7, 8  
9
10  
CC  
CC  
Rating  
TV:TV-14  
1
2
program title  
program guide  
(The program guide added to broadcasting  
information is displayed to a maximum of 4 lines.)  
broadcast station  
channel number  
3
4
5
audio language  
Refer to “Switching Audio Mode” on page 19.  
effective scanning lines and scan mode  
digital TV format  
program aspect ratio  
CC (not available if closed caption is set to “Off”)  
6
7
8
9
10 child lock rating  
Note:  
• When the program guide consists of more than 4 lines, use  
[Cursor K/ L] to scroll.  
• “No description provided.is displayed when the program  
guide is not provided.  
• While the program guide is displayed, the closed caption  
function is interrupted.  
• In external input mode, the following screen is displayed;  
e.g.) When an external device is connected to Video Input  
jack.  
Video  
480i SD  
480i  
CC  
TV-PG DLSV CC  
• The information display will automatically disappear in  
1 minute.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
TV Screen Display Mode  
4 types of display modes can be selected when the broadcasting station  
is sending 4:3 or 16:9 video signal. And 3 types of display modes can be  
selected for PC input signal.  
Press [FORMAT] repeatedly to switch the TV aspect  
ratio.  
For 16:9 video signal  
For 4:3 video signal  
16:9  
Normal  
Zoom  
Normal  
Wide  
Movie Expand  
Wide  
Movie Expand  
Normal  
Normal  
Display a 16:9 picture at its original size.  
Zoom  
Display a 4:3 picture at its original size. Sidebars appear  
on both edges of the screen.  
Display a 16:9 picture at its maximum size without  
changing its horizontal and vertical ratio.  
Movie Expand  
Display a vertically stretched picture.  
Wide  
Display a horizontally stretched picture.  
16:9  
Display a 4:3 picture at a 16:9 size; the picture is  
stretched horizontally to fill the screen.  
Movie Expand  
Display a 4:3 picture at a 16:9 size; the picture is  
stretched horizontally and vertically to fill the screen.  
This crops out the top and bottom of the picture.  
Wide  
Display the picture with its center at the original size  
and the edges stretched horizontally to fill the screen.  
HDMI1  
For PC input signal through  
Input mode  
Normal  
Full  
Dot By Dot  
Normal  
Display a proportionately stretched picture. Sidebars  
appear on both edges of the screen.  
Full  
Display a picture that is stretched out of proportion to  
fill the screen.  
Dot By Dot  
Display a picture in its original size.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
Main Menu  
Autoprogram  
This section describes the overview of the main menu displayed when you  
press [MENU]. For more details, see the reference page for each item.  
The main menu consists of the function setting items below.  
If you switch wires (e.g., between antenna and CATV) or if you move the  
unit to a different area after the initial setting, or if you restore the DTV  
channel you deleted, you will need to perform autoprogram.  
Before you begin: Make sure the unit is connected to antenna or cable.  
Press [MENU] to display the main menu.  
Press [MENU]  
1
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
Use [Cursor K /L] to select “SETUP” , then press [OK]  
SETUP  
2
FEATURES  
LANGUAGE  
DVD  
Color  
Tint  
Sharpness  
Color Temperature  
0
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
Normal  
SETUP  
FEATURES  
LANGUAGE  
DVD  
You can adjust the picture quality.  
Refer to “Picture Adjustment” on page 25.  
SOUND  
Use [Cursor K /L] to select “Autoprogram”, then press  
[OK]  
3
You can adjust the sound quality.  
Refer to “Sound Adjustment” on page 26.  
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
SETUP  
SETUP  
You can automatically scan the viewable channels.  
Refer to “Autoprogram” on page 22.  
FEATURES  
LANGUAGE  
DVD  
You can skip the undesired channels when selecting  
the channels using [CH + /  
]
Refer to “Channel List” on page 23.  
You can add the channels that were not scanned by  
the autoprogram.  
Use [Cursor K /L] to select an appropriate option, then  
press [OK]  
Refer to “Add Channels” on page 23.  
PICTURE  
SOUND  
Back  
Autoprogram will rescan all channels.  
Autoprogramming will take up to 20 minutes  
to complete.  
Antenna  
Cable  
FEATURES  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Select your signal source.  
• You can change the display format for closed  
caption, which displays the dialogue of a TV program  
or other information across the TV screen.  
Refer to “Closed Caption” on page 27.  
• You can set the viewing limitations.  
Refer to ‘‘Child Lockon page 30.  
• You can adjust the position, stability and clarity of the  
PC screen.  
Refer to “PC Settings” on page 34.  
Antenna  
Or  
Cable  
ANT.IN  
• When aerial antenna is connected, select “Antenna”.  
• When connected to CATV, select “Cable”.  
• “Autoprogramwill begin.  
Now the system is scanning for channels, please wait.  
Auto programming will take up to 20 minutes to complete.  
• You can select the energy saving mode.  
Refer to “Energy Saving Mode” on page 35.  
• When you adjust the desired “PICTUREand “SOUND”  
mode, you must switch the setting from “Retail” to  
“Home”. Refer to “Location” on page 35.  
• You can confirm the version of the software currently  
used in this unit.  
75%  
Analog channels  
Digital channels  
10 ch  
ch  
6
MENU  
Exit  
• When the scanning and memorizing are completed,  
the lowest memorized channel will be displayed.  
Refer to ”Current Software Info” on page 36.  
Note:  
• After setting “Autoprogram, using [CH
+
/ ] on the remote  
control skips unavailable programs automatically.  
• If you are not receiving a signal from your cable service,  
contact the Cable provider.  
• If you press [y (power)] or [MENU] during autoprogram,  
the setting will be canceled.  
• Even if “Autoprogram“ is completed, the channel setting  
will be lost if the AC power cord is unplugged before  
turning off the unit by pressing [y (power)]  
• The PIN Code will be required once you set a PIN Code in  
the “Child Lock. Refer to page 30.  
• If you want to change your PIN Code, follow the instruction  
of “Change PIN”. Refer to page 33.  
LANGUAGE  
You can change the language (English, Spanish,  
French) displayed on the main menu.  
Refer to “Language Selection” on page 24.  
DVD  
You can customize some functions for the disc  
playback. Make sure the unit is in stop mode.  
Refer to “DVD SETTING“ section on page 46.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Channel List  
Add Channels  
The channels selected here can be skipped when selecting the channels  
This function lets you add the channels that were not added by the  
autoprogram due to the receptible condition at the initial setting.  
using [CH
+
/  
]
Those channels can still be selected with [the Number buttons]  
Press [MENU] to display the main menu.  
Press [MENU] to display the main menu.  
1
1
[Cursor K /L] to select “SETUP”, then press [OK]  
[Cursor K /L] to select “SETUP”, then press [OK]  
2
2
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
SETUP  
SETUP  
FEATURES  
LANGUAGE  
DVD  
FEATURES  
LANGUAGE  
DVD  
Use [Cursor K /L] to select “Add Channels”, then press  
[OK]  
Use [Cursor K /L] to select “Channel List”, then press  
[OK]  
3
4
3
4
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
SETUP  
SETUP  
FEATURES  
LANGUAGE  
DVD  
FEATURES  
LANGUAGE  
DVD  
Use [the Number buttons] to enter the number of the  
channel you want to add, then press [OK]  
Use [Cursor K /L] to select the channel you want to  
remove, then press [OK]  
11  
PICTURE  
SOUND  
DTV  
DTV  
DTV  
11.1  
11.2  
11.3  
SETUP  
Highlight channels for Ch Up/Down key  
selection.  
FEATURES  
LANGUAGE  
DVD  
PICTURE  
SOUND  
Add channels  
For analog channels, select a channel to be  
added using number keys.  
SETUP  
For digital channels, you must perform  
Autoprogram function.  
FEATURES  
LANGUAGE  
DVD  
BACK  
OK  
Back  
Ch Select  
Watch/Skip  
BACK  
Back  
Ch Change  
• The channel display for the removed channel  
darkens. You will not be able to select the channel  
again using [CH
+
/  
]
Press [MENU] to exit.  
• To reactivate a removed channel, use [Cursor K/L] and  
press [OK]. The registered channels are highlighted.  
• When you remove a main channel, its subchannels  
are removed as well.  
5
Note:  
Note:  
• If setup completes successfully,  
• The channel with the “DTV” indicated on the display is  
ATSC. Otherwise the channel is NTSC.  
“Added to the channel list” is displayed.  
• If external input is used, it is not possible to register the  
channel and “Unavailable” will be displayed on the TV  
screen.  
Press [MENU] to exit.  
5
• By using [CH + / ], you can select the memorized  
channels only.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
Antenna Confirmation  
Language Selection  
You can choose English, Spanish, or French as your on-screen language.  
DTV  
This function lets you check the digital signal strength of each channel.  
Press [MENU] to display the main menu.  
Press [MENU] to display the main menu.  
1
1
[Cursor K /L] to select “SETUP”, then press [OK]  
2
Use [Cursor K /L] to select “LANGUAGE”, then press  
[OK]  
2
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
SETUP  
FEATURES  
LANGUAGE  
DVD  
PICTURE  
Select the language for setup display.  
Elija el idioma de ajuste.  
SOUND  
SETUP  
English  
Español  
Français  
FEATURES  
LANGUAGE  
DVD  
Sélectionner langue écran config.  
Use [Cursor K /L] to select “Antenna”, then press [OK]  
3
4
PICTURE  
SOUND  
Autoprogram  
Channel List  
Add Channels  
Antenna  
Use [Cursor K /L] to select “English”, “Español” or  
“Français”, then press [OK]
.  
3
4
SETUP  
FEATURES  
LANGUAGE  
DVD  
PICTURE  
Select the language for setup display.  
Elija el idioma de ajuste.  
SOUND  
SETUP  
English  
Español  
Français  
FEATURES  
LANGUAGE  
DVD  
Sélectionner langue écran config.  
Use [the Number buttons] or [CH + / ] to select the  
channel for which you want to check the digital signal  
strength.  
Press
[MENU]
to exit.  
11.1  
PICTURE  
SOUND  
Back  
SETUP  
Note:  
FEATURES  
LANGUAGE  
DVD  
• If you need the English menus instead of the Spanish or  
French menus, press [MENU]. Use [Cursor K /L] to select  
“IDIOMA” or “LANGUE, then press [OK]  
Use [Cursor K /L] to select “English, then press [OK] Press  
[MENU] to exit the main menu.  
Current 50  
Max  
50  
CH  
Ch Change  
• If the channel is set to analog channel or external  
input, you cannot confirm the antenna condition.  
Video  
PICTURE  
SOUND  
Back  
SETUP  
Indicator is available for digital  
broadcasting only.  
FEATURES  
LANGUAGE  
DVD  
CH  
Ch Change  
Press [MENU] to exit.  
5
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Picture Adjustment  
You can adjust brightness, contrast, color, tint, sharpness and color  
temperature.  
Before you begin: You must set ”Home” in ”Location. Refer to page 35.  
Otherwise, the settings you adjusted will not be  
memorized after you turn off the unit.  
Brightness, Contrast, Color, Tint, Sharpness,  
Color Temperature  
Use [Cursor K /L] to select the desired setting, then  
Press [MENU] to display the main menu.  
1
use [Cursor  
s
/
B
] to adjust.  
Use [Cursor K /L] to select “PICTURE”, then press [OK]  
2
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
Cursor  
s
Cursor  
B
Tint  
Sharpness  
Color Temperature  
0
Brightness  
Normal  
to decrease  
brightness  
to increase  
brightness  
Brightness  
30  
60  
36  
0
OK  
Adjust  
Move  
OK  
Contrast  
Contrast  
[Cursor K /L] to select the item you want to adjust,  
then press [OK]  
3
4
to decrease  
contrast  
to increase  
contrast  
OK  
Adjust  
Move  
Move  
Move  
Move  
OK  
Color  
Color  
to decrease  
color intensity color intensity  
to increase  
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
OK  
Adjust  
OK  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
Tint  
Tint  
Tint  
Sharpness  
Color Temperature  
0
Normal  
to add red  
to add green  
to sharpen  
OK  
Adjust  
OK  
OK  
OK  
Sharpness  
Adjust the picture quality.  
Sharpness  
0
to soften  
OK  
Adjust  
Smart Picture  
Use [Cursor K /L] to select the desired setting, then  
press [OK]  
Color Temperature  
Color Temp. Normal  
to add warm  
colors  
to add cool  
colors  
OK  
Adjust  
Move  
(‘‘Personal, ‘‘Standard, ‘Sports, ‘‘Movie“ and ‘‘Game“)  
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
Standard  
Sports  
Movie  
Press
[MENU]
to exit.  
5
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
Tint  
Game  
Sharpness  
Color Temperature  
Note:  
• To cancel picture adjustment, press [MENU]  
• Only the “Personal” setting can be adjusted.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
Sound Adjustment  
You can adjust the smart sound, equalizer and some other sound functions.  
Auto Volume Leveling  
This function keeps a constant loudness differential  
between the TV commercials and the programs.  
Before you begin: You must set ”Home” in ”Location. Refer to page 35.  
Otherwise, the settings you adjusted will not be  
memorized after you turn off the unit.  
Use [Cursor K /L] to select the desired option, then  
press [OK]  
Press [MENU] to display the main menu.  
1
PICTURE  
SOUND  
On  
Off  
SETUP  
Auto Volume Leveling reduces volume  
differences between  
channels and programs, providing  
FEATURES  
LANGUAGE  
DVD  
a
consistent audio level.  
Use [Cursor K /L] to select “SOUND”, then press [OK]  
2
PICTURE  
SOUND  
Smart Sound  
Equalizer  
Standard  
Select if you want to reduce volume  
differences between the TV commercials  
and the programs.  
SETUP  
Auto Volume Leveling  
TV Speakers  
Off  
FEATURES  
LANGUAGE  
DVD  
Ext. Amp  
On  
Select if you want to remove the auto  
volume leveling.  
Off  
TV Speakers  
Use [Cursor K /L] to select the sound type you want to  
adjust, then press [OK]  
3
4
Select the audio output from the unit’s speakers, or not.  
If your amplifier compatible with the CEC function is  
connected to this unit using an HDMI cable, some part  
of the sound operations such as volume up can access  
synchronized by using this unit’s remote control.  
PICTURE  
SOUND  
Smart Sound  
Equalizer  
Standard  
SETUP  
Auto Volume Leveling  
TV Speakers  
Off  
FEATURES  
LANGUAGE  
DVD  
Ext. Amp  
Use [Cursor K /L] to select the desired option, then  
press [OK]  
PICTURE  
SOUND  
On  
Off  
"On":  
Sound will be output from the TV speakers.  
"Off":  
Sound will not be output from the TV  
SETUP  
Ext. Amp  
Adjust the following items.  
FEATURES  
LANGUAGE  
DVD  
speakers.  
"Ext. Amp":  
Operation is possible by connecting to the  
HDMI-CEC compatible amp with  
a
HDMI  
Smart Sound  
Use [Cursor K /L] to select the desired setting, then  
press [OK]  
cable. For details look in the user manual.  
(“Personal , Standard , Movie , Music “and “News “)  
The sound will be output from the unit’s  
speakers.  
On  
Off  
The sound will not be output from the  
unit’s speakers.  
PICTURE  
SOUND  
SmartSound
Equalizer  
Personal  
Standard  
Movie  
This function allows you to control audio  
output from CEC-compatible devices  
with the unit’s remote control.  
SETUP  
Auto Volume Leveling  
TV Speakers  
FEATURES  
LANGUAGE  
DVD  
Music  
Ext. Amp  
News  
Press [MENU] to exit.  
5
Equalizer  
Adjust tonal quality for each frequencies.  
Use
[Cursor ] to select the specific frequency and  
s
/
B
use [Cursor K /L] to adjust the level, then press [OK]  
Note:  
• To cancel sound adjustment, press [MENU]  
• We do not guarantee 100% interoperability with other  
brands of CEC compliant devices.  
PICTURE  
0
0
0
0
0
SOUND  
SETUP  
FEATURES  
LANGUAGE  
DVD  
120Hz 500Hz 1.5kHz 5kHz 10kHz  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Closed Caption  
A. Caption Service  
You can view closed captioning (CC) for TV programs, movies and news.  
Closed caption refers to text of dialogue or descriptions displayed on-  
screen.  
Use [Cursor K /L] to select “Caption Service”, then  
4
5
press [OK]  
Press [MENU] to display the main menu.  
1
PICTURE  
SOUND  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
Off  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Use [Cursor K /L] to select “FEATURES”, then press  
[OK]  
2
PICTURE  
SOUND  
Closed Caption  
Child Lock  
Use [Cursor K /L] to select the desired closed caption,  
then press [OK]  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
Current Software Info  
PICTURE  
SOUND  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
CC-1  
CC-2  
CC-3  
CC-4  
T- 1  
SETUP  
FEATURES  
LANGUAGE  
DVD  
T- 2  
T- 3  
Use
[Cursor K /L] to select “Closed Caption”, then  
press [OK]  
3
T- 4  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
Caption mode  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
CC-1 and T-1;  
Home  
Current Software Info  
are the primary caption and text services.  
The captioning or text is displayed in the same  
language as the program’s dialogue  
(up to 4 lines of script on the TV screen, where it  
does not obstruct relevant parts of the picture).  
CC-3 and T-3;  
See the following description for setting each item.  
serve as the preferred data channels.  
The captioning or text is often a secondary language.  
CC-2, CC-4, T-2 and T-4;  
PICTURE  
SOUND  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
Off  
A
B
C
SETUP  
FEATURES  
LANGUAGE  
DVD  
are rarely available and broadcasters use them only  
in special conditions, such as when “CC-1” and  
“CC-3” or “T-1” and “T-3” are not available.  
There are 3 display modes according to programs:  
Paint-on mode:  
A
B
C
“A. Caption Service”  
page 27  
page 28  
page 28  
“B. Digital Caption Service”  
“C. Caption Style”  
Displays input characters on the TV screen  
immediately.  
Pop-on mode:  
Once characters are stored in memory, they are  
displayed all at once.  
Roll-up mode:  
Displays the characters continuously by scrolling  
(max. 4 lines).  
Press [MENU] to exit.  
6
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
B. Diiggiittaall CCaapttion Seervviice  
C. Caption Sttyle  
DTV  
DTV  
In addition to the basic closed caption described on page 27, DTV has its  
own closed caption called digital caption service. Use this menu to change  
the settings for digital caption service.  
You can change the caption style such as font, color or size, etc.  
K
K
Use [Cursor /L] to select “Digital Caption Service”,  
Use [Cursor /L] to select “Caption Style”, then press  
[OK]  
4
4
then press [OK]  
PICTURE  
SOUND  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
Off  
PICTURE  
SOUND  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
Off  
SETUP  
SETUP  
FEATURES  
LANGUAGE  
DVD  
FEATURES  
LANGUAGE  
DVD  
K
Use [Cursor /L] to select the desired digital caption  
5
K
Use [Cursor /L] to select “User Setting”, then press  
[OK]  
5
service, then press [OK]  
PICTURE  
SOUND  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
CS-1  
CS-2  
CS-3  
CS-4  
CS-5  
CS-6  
PICTURE  
SOUND  
User Setting  
Font Style  
Off  
SETUP  
FEATURES  
LANGUAGE  
DVD  
SETUP  
Font Size  
Middle  
White  
Solid  
Black  
Solid  
Black  
None  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Edge Type  
Select if you do not want digital caption  
service. This is the default.  
Off  
K
Use [Cursor /L] to select “On”, then press [OK]  
6
7
Select one of these before changing  
any other item in “Closed Caption”  
menu. Choose “CS-1under normal  
circumstances.  
CS-1 to CS-6  
PICTURE  
SOUND  
User Setting  
Font Style  
On  
Off  
SETUP  
Font Size  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Press
[MENU]
to exit.  
6
Edge Type  
K
Use [Cursor /L] to select an item, then press [OK]  
K
Then use
[Cursor /L] to select the desired setting  
and press [OK]  
Note:  
• “Digital Caption Service” that you can switch differs  
depending on the broadcast description.  
Picture display  
ABCDEFGHIJKL  
Edge  
(Edge Color and Edge Type)  
Font  
(Font Style, Font Size, Font Color and Font Opacity  
or Transparency)  
Background  
(Background Color and Background Opacity or  
Transparency)  
• The setting description for each item is shown on the  
next page.  
Review your setting choice made on the next page  
by looking in the upper right corner of the displayed  
setting box (not all selections show the differences  
selected).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Edge Color  
Closed Captioning font style can be changed as below.  
Edge color of the displayed caption can be switched as  
below.  
Closed Caption  
PICTURE  
SOUND  
User Setting  
Font Style  
Closed Caption  
PICTURE  
SOUND  
User Setting  
Font Style  
SETUP  
Font Size  
White  
Black  
Red  
FEATURES  
LANGUAGE  
DVD  
Font Color  
SETUP  
Font Size  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Edge Type  
Edge Type  
Font Size  
Font size of the displayed caption can be switched as  
below.  
Edge Type  
Edge type of the displayed caption can be switched as  
below.  
Closed Caption  
PICTURE  
SOUND  
User Setting  
Font Style  
Closed Caption  
SETUP  
Font Size  
Large  
Middle  
Small  
PICTURE  
SOUND  
User Setting  
Font Style  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
SETUP  
Font Size  
FEATURES  
LANGUAGE  
DVD  
Font Color  
None  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Raised  
Depressed  
Uniform  
L. Shadow  
R.Shadow  
Edge Type  
Edge Type  
Font Color  
Font color of the displayed caption can be switched as  
below.  
Press [MENU] to exit.  
8
Closed Caption  
PICTURE  
SOUND  
User Setting  
Font Style  
White  
Black  
Red  
SETUP  
Font Size  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Edge Type  
Font Opacity  
Font opacity of the displayed caption can be switched  
as below.  
Note:  
Closed Caption  
• To show the closed caption on your TV screen, broadcast  
signal must contain the closed caption data.  
• Not all TV programs and commercials have the closed  
caption or all types of the closed caption.  
• Captions and texts may not match the TV voice exactly.  
• Changing channels may delay the closed caption for a few  
seconds.  
PICTURE  
SOUND  
User Setting  
Font Style  
SETUP  
Font Size  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Solid  
Flash  
Translucent  
Transparent  
Edge Type  
• Adjusting or muting the volume may delay the closed  
caption for a few seconds.  
Background Color  
• Abbreviations, symbols and other grammatical shortcuts  
may be used in order to keep pace with the on-screen  
action. This is not a malfunction.  
Background color of the displayed caption can be  
switched as below.  
• The caption or text characters will not be displayed while  
the main menu or functions display is shown.  
• If a black box appears on the TV screen, this means that  
the closed caption is set to the text mode. To clear the box,  
select “CC-1, CC-2, CC-3, CC-4” or “Off.  
• If the unit receives poor quality television signals, the  
captions may contain errors, or there might be no captions  
at all. Some possible causes of poor quality signals are:  
- Automobile ignition noise  
- Electric motor noise  
- Weak signal reception  
- Multiplex signal reception (ghosts or screen flutter)  
• The unit retains the closed caption setting if the power  
fails.  
• Closed caption will not be displayed when you are using  
an HDMI connection.  
• When the unit receives special effects playback signal (i.e.,  
Search, Slow and Still) from a VCR’s video output channel  
(CH3 or CH4), the unit may not display the correct caption  
or text.  
Closed Caption  
PICTURE  
SOUND  
User Setting  
Font Style  
White  
Black  
Red  
SETUP  
Font Size  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Green  
Blue  
Yellow  
Magenta  
Cyan  
Edge Type  
Background Opacity  
Background opacity of the displayed caption can be  
switched as below.  
Closed Caption  
PICTURE  
SOUND  
User Setting  
Font Style  
SETUP  
Font Size  
FEATURES  
LANGUAGE  
DVD  
Font Color  
Font Opacity  
Background Color  
Background Opacity  
Edge Color  
Solid  
Flash  
Translucent  
Transparent  
Edge Type  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
Child Lock  
Child lock reads the ratings for programs, then denies access to the  
programs which exceed the rating level you set. With this function, you  
can block certain programs inappropriate for children and any channels or  
external input modes can be invisible.  
See the following description for setting each item.  
Press [MENU] to display the main menu.  
1
PICTURE  
SOUND  
Channel Lock  
A
B
C
US Movie ratings lock  
US TV ratings lock  
Canadian English Rating  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Canadian French Rating  
Region ratings lock  
Change PIN  
K
Use [Cursor /L] to select “FEATURES”, then press  
2
D
[OK]  
A
B
C
D
“A. Channel Lock”  
page 31  
page 31  
page 32  
page 33  
“B. US Movie ratings lock”  
“C. US TV ratings lock”  
“D. Change PIN”  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
Current Software Info  
Note:  
• When you select a rating and set it to “Block, the higher  
ratings will be blocked automatically. The lower ratings  
will be available for viewing.  
Use [Cursor K /L] to select “Child Lock, then press  
[OK]  
3
4
• When you set the highest rating to “View, all ratings turn  
to “View” automatically.  
• To block any inappropriate programs, set your limits in  
“US Movie ratings lock, US TV ratings lock” and  
“Region ratings lock.  
• The child lock setting will be retained after a power failure  
(except the access code reverts to 0000).  
• If the rating is blocked, will appear.  
• “Region ratings lock” will be available when the unit  
receives a digital broadcast using the new rating system.  
• If the broadcasting signal does not have the region ratings  
lock information, “Region ratings lock is currently not  
available.will appear.  
This message will also appear when you try to access  
“Region ratings lock” after you have cleared the region  
ratings lock information, and the new information has not  
been downloaded since.  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
Current Software Info  
Use [the Number buttons] to enter the 4-digit  
numbers for your PIN Code.  
• The Canadian rating systems on this unit is based on  
CEA-766-A and the Canadian Radio-Television and  
Telecommunications Commission (CRTC) policy.  
PICTURE  
SOUND  
SETUP  
FEATURES  
Enter PIN  
_
LANGUAGE  
DVD  
BACK  
Back  
PIN Code  
When you have not set up your PIN Code,  
enter [0] [0] [0] [0]  
• When the PIN Code is correct, “Child Lock” menu is  
displayed.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
A. Chhaannnnel Loocck  
B. US MMovie raattiinnggss lloocckk  
Particular channels or external input modes can be invisible in this  
function.  
US Movie ratings lock is the rating system created by MPAA (Motion Picture  
Association of America).  
Use [Cursor K /L] to select “Channel Lock”, then press  
[OK]  
Use [Cursor K /L] to select “US Movie ratings lock”,  
then press [OK]  
5
5
PICTURE  
SOUND  
Channel Lock  
PICTURE  
SOUND  
Channel Lock  
US Movie ratings lock  
US TV ratings lock  
Canadian English Rating  
Canadian French Rating  
Region ratings lock  
Change PIN  
US Movie ratings lock  
US TV ratings lock  
Canadian English Rating  
Canadian French Rating  
Region ratings lock  
Change PIN  
SETUP  
SETUP  
FEATURES  
LANGUAGE  
DVD  
FEATURES  
LANGUAGE  
DVD  
Use [Cursor K /L] to select the desired rating, then  
press [OK] repeatedly to switch between “View” and  
“Block”.  
Use [Cursor K /L] to select the desired rating, then  
press [OK] repeatedly to switch between “View” and  
“Block”.  
6
6
37MD350B  
PICTURE  
PICTURE  
X
Video  
SOUND  
SOUND  
NC-17  
Component  
SETUP  
SETUP  
R
HDMI1  
FEATURES  
FEATURES  
PG-13  
HDMI2  
LANGUAGE  
LANGUAGE  
PG  
HDMI3  
DVD  
DVD  
G
DVD  
NR  
BACK  
BACK  
OK  
Back  
Select  
View  
/
Block  
OK  
View  
Back  
Select  
/
Block  
32MD350B  
Rating  
Category  
Mature audience only  
No one under 17 admitted  
PICTURE  
SOUND  
X
Video  
Component  
HDMI1  
HDMI2  
DVD  
SETUP  
NC-17  
FEATURES  
LANGUAGE  
DVD  
Restricted; under 17 requires accompanying  
parent or adult guardian  
11.1DTV  
R
BACK  
OK  
Back  
Select  
View / Block  
PG-13  
PG  
Unsuitable for children under 13  
Parental guidance suggested  
General audience  
G
Press [MENU] to exit.  
7
NR  
No rating  
Press [MENU] to exit.  
7
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
C. US TV ratings loock  
Rating  
TV-MA  
Category  
Mature audience only  
Use [Cursor K /L] to select “US TV ratings lock”, then  
press [OK]  
5
higher  
lower  
TV-14  
TV-PG  
TV-G  
Unsuitable for children under 14  
Parental guidance suggested  
General audience  
PICTURE  
SOUND  
Channel Lock  
US Movie ratings lock  
US TV ratings lock  
Canadian English Rating  
Canadian French Rating  
Region ratings lock  
Change PIN  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Appropriate for all children 7 and  
older  
TV-Y7  
TV-Y  
Appropriate for all children  
Sub Rating  
Category  
Rating  
TV-Y7  
TV-PG  
Use [Cursor K /L /  
then press [OK] repeatedly to switch between “View”  
and “Block”.  
s
/
B
] to select the desired rating,  
6
FV  
V
Fantasy Violence  
Violence  
S
Sexual Situation  
Coarse Language  
Suggestive Dialogue  
TV-14  
TV-MA  
L
PICTURE  
FV  
V
S
L
D
D
TV-PG, TV-14  
SOUND  
SETUP  
TV-MA  
TV-14  
TV-PG  
TV-G  
FEATURES  
LANGUAGE  
DVD  
TV-Y7  
TV-Y  
Note:  
BACK  
• Blocked sub rating will appear beside the main rating  
category in “US TV ratings lock” menu.  
OK  
Back  
Select  
View  
/
Block  
• You cannot block a sub rating (D, L, S or V) if the main  
rating is set to “View.  
• Changing the category to “Block” or “View” automatically  
changes all its sub ratings to the same (“Block” or “View”).  
Press [MENU] to exit.  
7
To set the sub ratings  
As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further  
set the sub ratings to block specific elements of  
programming. To set the sub ratings, follow the step  
below.  
Use [Cursor K /L /  
s
/
B
] to select the desired rating,  
then press [OK] repeatedly to switch between “View”  
and “Block”.  
PICTURE  
FV  
V
S
L
D
SOUND  
SETUP  
TV-MA  
TV-14  
TV-PG  
TV-G  
FEATURES  
LANGUAGE  
DVD  
TV-Y7  
TV-Y  
BACK  
OK  
Back  
Select  
View  
/
Block  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
D. Chhaannggee PIN  
Although the default code (0000) is supplied with the unit, you can set your  
own PIN Code.  
Use [Cursor K /L] to select “Change PIN”, then press  
[OK]  
5
PICTURE  
SOUND  
Cannel Lock  
US Movie ratings lock  
US TV ratings lock  
Canadian English Rating  
Canadian French Rating  
Region ratings lock  
Change PIN  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Press [the Number buttons] to enter the new 4-digit  
PIN Code.  
Enter PIN Code again in “Confirm PIN” entry field.  
6
7
PICTURE  
SOUND  
_
Enter PIN  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Confirm PIN  
BACK  
Back  
PIN Code  
Press [MENU] to exit.  
Note:  
• Make sure new PIN Code and confirm PIN Code must be  
exactly the same. If they are different, the space is cleared  
for reentering.  
• Your PIN Code will be erased and return to the default  
(0000) when a power failure occurs.  
If you forget the PIN Code, unplug the AC power cord for 10  
seconds to restore the PIN Code to 0000.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
PC Settings  
This function lets you adjust the PC screen position during PC input through  
the HDMI 1 Input jack.  
Press [MENU] to display the main menu.  
Adjust the setting.  
1
5
Position Reset  
Use [Cursor K /L] to select “Reset”, then press [OK]  
K
Use [Cursor /L] to select “FEATURES”, then press  
[OK]  
2
PICTURE  
SOUND  
Cancel  
Reset  
Resets the display position of  
the picture.  
SETUP  
FEATURES  
LANGUAGE  
DVD  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
• The horizontal/vertical position of the PC screen are  
automatically adjusted.  
Current Software Info  
Horizontal Position, Vertical Position  
Use [Cursor  
s /B] to adjust.  
K
Use [Cursor /L] to select “PC Settings”, then press  
[OK]  
3
4
Cursor  
s
Cursor  
B
Horizontal Position  
to move PC  
screen left  
to move PC  
screen right  
-
+
H. Position  
0
OK  
Adjust  
Move  
OK  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
Vertical Position  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
to move PC  
screen down  
to move PC  
screen up  
Home  
-
+
V. Position  
0
Current Software Info  
OK  
Adjust  
Move  
OK  
Press [MENU] to exit.  
6
Use [Cursor K /L] to select the setting you want to  
adjust, then press [OK]  
Note:  
• You may not obtain an appropriate screen with  
“Position Reset“ for some signals. In this case, adjust the  
settings manually.  
PICTURE  
SOUND  
Position Reset  
SETUP  
Horizontal Position  
Vertical Position  
0
0
FEATURES  
LANGUAGE  
DVD  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Energy Saving Mode  
Location  
When you select ”Retail”, the power consumption may possibly exceed the  
limited requirement of the ENERGY STAR® qualification.  
You can set whether the power consumption is saved or not.  
Press [MENU] to display the main menu.  
Press [MENU] to display the main menu.  
1
1
K
Use [Cursor /L] to select “FEATURES”, then press  
[OK]  
K
Use [Cursor /L] to select “FEATURES”, then press  
[OK]  
2
2
PICTURE  
SOUND  
Closed Caption  
Child Lock  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
Home  
Current Software Info  
Current Software Info  
K
Use [Cursor /L] to select “Location”, then press [OK]  
K
Use [Cursor /L] to select “Energy Saving Mode”, then  
press [OK]  
3
4
3
4
PICTURE  
SOUND  
Closed Caption  
Child Lock  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
SETUP  
PC Settings  
Home  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Current Software Info  
Home  
Current Software Info  
K
Use [Cursor /L] to select the desired location, then  
press [OK]  
K
Use [Cursor /L] to select the desired mode, then  
press [OK]  
PICTURE  
SOUND  
Retail  
Home  
PICTURE  
SOUND  
On  
SETUP  
Location Home is recommended for  
normal home use.  
In the Retail Store mode, all settings are  
fixed.  
Off  
FEATURES  
LANGUAGE  
DVD  
When set to “On”,power consumption is  
reduced by decreasing backlight brightness.  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Select if you want to reduce the power  
consumption.  
Press
[MENU]
to exit.  
5
On  
Off  
The power consumption may possibly  
exceed the limited requirement of the  
ENERGY STAR® qualification.  
Press
[MENU]
to exit.  
5
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PTIONAL SETTING  
O
Current Software Info  
This function shows what version of the software currently used.  
Press [MENU] to display the main menu.  
1
K
Use [Cursor /L] to select “FEATURES”, then press  
[OK]  
2
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
Current Software Info  
K
Use [Cursor /L] to select “Current Software Info”,  
3
then press [OK]  
PICTURE  
SOUND  
Closed Caption  
Child Lock  
SETUP  
PC Settings  
FEATURES  
LANGUAGE  
DVD  
Energy Saving Mode  
Location  
On  
Home  
Current Software Info  
Confirm the version of the software currently used.  
4
5
PICTURE  
SOUND  
Back  
Release Version:  
XXXXXX_XX  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Press
[MENU]
to exit.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PERATING DVD  
DVD Functions  
Playable Media  
DVD-VIDEO  
DVD-RW  
DVD-R  
CD-DA  
CD-RW  
CD-R  
Media Type  
Logo  
Recorded  
Signal  
digital video (MPEG2)  
digital audio  
Media Size  
5 inches (12 cm)  
Unplayable Media  
NEVER play back the following discs. Otherwise, malfunction may result!  
3 inches (8 cm) disc, DVD-RAM, DVD-audio, CD-i, photo CD, Video CD, DVD with region codes other than 1 or ALL, DTS-CD,  
DVD-ROM for personal computers, CD-ROM for personal computers, the discs with labels, scratches, stains, blemishes, etc.,  
HD DVD, Blu-ray Disc, CD-RW/-R with MP3 files and CD-RW/-R with JPEG files including Kodak Picture CD.  
On the following disc, the sound MAY NOT be heard.  
super audio CD  
Any other discs without compatibility indications  
Region Codes  
Color Systems  
This unit has been designed to play back DVD  
with region 1. DVD must be labeled for ALL  
regions or for region 1 in order to play back on  
the unit. You cannot play back DVD that are  
labeled for other regions. Look for the symbols on  
your DVD. If these region symbols are not on your  
DVD, you cannot play back the DVD in this unit.  
DVD is recorded in different color systems throughout the  
world. The most common color system is NTSC (which is  
used primarily in the United States and Canada).  
This unit uses NTSC, so DVD you play back must be  
recorded in the NTSC system. You cannot play back DVD  
recorded in PAL color systems.  
The number inside the globe refers to region of the world.  
A DVD labeled for a specific region can only be played  
back on the unit with the same region code.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PERATING DVD  
O
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.  
Playback  
Disc Menu  
Before you begin:  
DVD  
Turn on the amplifier and any other equipment which is connected to this unit.  
Make sure the external audio receiver (not included) are set to the correct channel.  
Some discs contain disc menus which describe the contents of the disc or  
allow you to customize disc playback, or title menu which lists the titles  
available on the DVD.  
Press [y(power)] to turn on the unit.  
1
To display the DVD menu, press [DISC MENU]
and use  
[Cursor K / L /  
s
/
B] to select an item, then press [OK]  
(or [PLAY B]).  
To display the top menu, press [TITLE] and use  
Insert a disc with label facing forward.  
2
[Cursor K / L /  
s
/
B] to select an item, then press [OK]  
(or [PLAY B]).  
Note:  
la  
Menu operations may vary depending on the disc.  
be  
l
Refer to the manual accompanying the disc for more details.  
• In case the DVD was recorded on both sides, make  
sure the label of the side you want to play back is  
facing forward.  
Resume Playback  
Press
[STOP C] during playback.  
The unit switches to the DVD mode when the unit was  
in TV mode and detects the type of disc.  
e.g.) DVD  
3
Resume message will appear on  
Resume ON  
the TV screen.  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
Press
[PLAY B]. Playback will  
resume from the point at which  
DVD  
playback was stopped.  
Press
[PLAY B] if the unit does not go to the DVD mode.  
The unit starts playback.  
4
5
If playback does not start automatically, press [PLAY B]  
again.  
Press
[STOP C] to stop playback temporarily.  
If playback remains stopped for 20 minutes, the unit will  
turn itself off automatically when “AUTO POWER OFF“ is  
set to “ON.  
Paused and Step-by-step Playback  
A
Press
[EJECT ] to eject the disc.  
6
Press [PAUSE F] during playback.  
• Playback will be paused and sound will be  
muted.  
To continue playback, press [PLAY B]  
Note:  
DVD  
” may appear at the top-right on the TV  
screen when the operation is prohibited by the  
disc or this unit.  
Each time you press [PAUSE F] in the pause mode, the  
disc goes forward one frame at a time.  
To continue playback, press [PLAY B]  
Some DVD may start playback from title 2 or 3 due to  
specific programs.  
During the playback of a 2-layered disc, pictures may stop  
for a moment. This happens while the 1st layer is being  
switched to the 2nd layer. This is not a malfunction.  
• When you cannot remove the disc, you may try either  
following operations.  
Note:  
Set “STILL MODE” to “FIELD” in the “OTHERS” menu if  
pictures in the pause mode are blurred. Refer to page 49.  
- Press and hold [EJECT A] on the unit for more than 5 seconds.  
- Unplug the AC power cord and plug it in again, then press  
[EJECT A]  
It will take about 10 seconds to eject the disc, while that the  
unit will not respond to any key commands.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Fast Forward / Fast Reverse  
Once a desired zoom factor is set,  
3
4
Press [FWD D] or [REV E] repeatedly  
during playback to select the desired  
forward or reverse speed.  
E
1
use [Cursor K / L /  
s
/
B
] to slide the zoomed picture  
across the TV screen.  
To continue playback, press [PLAY B]  
Note:  
Set “STILL MODE” to “FIELD” in the “OTHERS” menu if  
pictures in the fast playback mode are blurred. Refer to page  
49.  
Fast forward / fast reverse speed varies with disc.  
Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x)  
on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.  
For DVD, sound will be muted during this function.  
For audio CD, sound will be intermittent during the search.  
[OK]  
repeatedly until “OFF“ appears.  
Slow Forward / Slow Reverse  
DVD  
Note:  
The gray box with an inner blue box that shows during  
zoomed playback is the position guide indicates the position  
of the zoomed image within the overall image.  
Position guide stays on the TV screen until you press [OK]  
Press [OK] one more time to recall the position guide when  
disappears.  
Press [FWD D] or [REV E] repeatedly  
during the paused mode to select the  
desired forward or reverse speed.  
To continue playback, press [PLAY B]  
1
Zoom function does not work while the disc menu is  
displayed.  
Note:  
4x zoom is not available on some discs.  
Zoom function is also available during pause mode.  
Set “STILL MODE” to “FIELD” in the “OTHERS” menu if  
pictures in the slow playback mode are blurred. Refer to  
page 49.  
• Slow forward / slow reverse speed varies with disc.  
Approximate speed is 1(1/16x), 2(1/8x) and 3(1/2x).  
The sound will be muted during this function.  
Zoom  
DVD  
The zoom function allows you to enlarge the video image and to pan  
through the enlarged image.  
During playback, press [MODE] repeatedly until  
1
appears  
(
)
OFF ZOOM  
• The picture becomes twice as large.  
Press [OK] repeatedly to change the zoom factor, “2x”  
or “4x.  
2
(
)
4x ZOOM  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PERATING DVD  
O
Using [SKIP H
/
G]  
Search Functions  
During playback, press [SKIP H / G] repeatedly  
1
Chhaapptteerr // TTiittllee // TTrraacckk SSeeaarrcchh  
until a desired chapter, title or track will be selected.  
current chapter/track  
(CH) (TR)  
You can select chapters, titles or tracks on the disc.  
CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4  
[SKIP H]  
[SKIP G]  
During playback, press [MODE] repeatedly until  
1
or  
“ / “
 
“ appears.  
• If you want to perform the title search, use  
current title  
(TT)  
or  
[Cursor K / L] repeatedly until “ “ appears.  
TT 1 TT 2 TT 3 TT 4  
[SKIP H]  
[SKIP G]  
e.g.)
DVD  
(If the disc has no chapter.)  
(
)
/12 SEARCH  
2
or track you selected.  
Note:  
[the Number buttons] to select your desired  
chapter, title or track within 60 seconds.  
2
3
[SKIP H / G] are not available when playback is stopped.  
(
)
/12 SEARCH  
To play back a single-digit chapter, title or track when  
there are more than 10 chapters, titles or tracks, press  
[OK] after entering the chapter, title or track number.  
Playback will start automatically from the chapter, title  
or track you selected.  
Note:  
Chapter, title or track search can only be performed during  
playback or when the unit has kept the resume information.  
It cannot be performed in the stop mode.  
The total number of chapters / titles / tracks in your disc;  
with less than 10 chapters / titles / tracks, press the chapter /  
title / track number directly. To play a double-digit chapter /  
title / track, press the chapter / title / track number.  
Track search is not available for programmed or random  
playback.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Time Search  
You can select the desired time which the disc is played back from.  
Diirreectt Search  
Press
[the Number buttons] to select your desired  
chapter, title or track.  
During playback, press [MODE] repeatedly until  
1
/
“  
“ appears.  
e.g.) DVD  
(
)
/12 SEARCH  
Note:  
[Cursor K / L] repeatedly until “  
“ appears.  
To select a single-digit chapter, title or track number, press  
the number directly.  
2
3
To select double digit chapter, title or track number:  
-
If the disc contains more than 9 and less than 100 chapter,  
title or track, press [+10] first, then enter the double digit  
chapter, title or track number.  
TOTAL  
1:29:00  
(e.g., for track 26, press [+10] [2] and [6].)  
Press [the Number buttons] to select your desired  
time lapse within 60 seconds.  
TOTAL  
1:29:00  
Repeat Playback  
Repeat function is available only during playback.  
During playback, press [MODE] repeatedly until “  
appears.  
1
(
)
OFF REPEAT  
Playback will start automatically from the time you  
selected.  
4
Note:  
Press [Cursor K / L] to change the repeat mode.  
When there is no need to enter a number, “0” appears  
automatically. For example, “0: 0_: _ _” appears in the time  
search menu if the total time of the title or track is less than  
10 minutes.  
2
DVD  
OFF  
(repeat off)  
Press [CLEAR] to erase the incorrect input at step 3.  
Time search can only be performed during playback or  
when the unit has kept the resume information.  
It cannot be performed in the stop mode.  
CHAPTER (current chapter repeat)  
TITLE  
(current title repeat)  
CD  
OFF  
(repeat off)  
TRACK  
ALL  
(
current track
repeat)  
(entire disc repeat)  
Press [BACK] to exit.  
3
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PERATING DVD  
O
Repeat A-B Playback  
Programmed Playback  
You can repeat playback between A and B on a disc.  
CD  
During playback, press [MODE] repeatedly until  
1
A
B
You may determine the order in which tracks will play back.  
” appears.  
(
)
A
B
OFF A-B REPEAT  
In stop mode, press [MODE] repeatedly until  
“PROGRAM” menu appears.  
1
PROGRAM  
CD-DA  
TOTAL 0:00:00  
Press [OK] at your desired starting point (A).  
2
3
T
T
T
T
T
T
T
1
2
3
4
5
6
7
3:31  
4:28  
4:19  
3:58  
4:12  
4:02  
3:55  
(
)
A
B
A- A-B REPEAT  
ENTER/OK  
1/  
1
1/  
3
PLAY  
T
1
3:31  
CLEAR  
Press [OK] at your desired ending point (B).  
Use [Cursor K / L] to select a desired track, then press  
[OK] to store.  
(
)
A
B
A-B A-B REPEAT  
2
3
• Additional tracks may be on other screens. Use  
[Cursor K /  
L
]
to go on to the next / previous pages.  
• Point B should be in the same title or track as point A.  
• Within a few seconds, the section A-B will begin to  
play back repeatedly.  
• Repeat this step until you have selected all the tracks  
you wish to play back in the program.  
PROGRAM  
CD-DA  
TOTAL 0:08:22  
To cancel repeat A-B playback, press [MODE]  
T
T
4
3:58  
T
T
15 3:18  
16 4:24  
4
16 4:24  
ALL CLEAR  
A
B
repeatedly until “  
“ appears.  
Press [OK] so “OFF” appears.  
ENTER/OK  
1/  
1
3/  
3
PLAY  
T
16 4:24  
CLEAR  
• Up to 99 tracks can be ordered.  
• If 8 or more tracks were in a program, use  
[SKIP H / G] to see all the tracks.  
Note:  
• Repeat setting (except “ALL) will be cleared when moving to  
another title or chapter, track.  
Press [PLAY B] to start programmed playback.  
• During programmed playback, repeat setting will be  
effective for the tracks in the program.  
• Repeat playback or repeat A-B playback may not available  
with some discs.  
Repeat A-B playback does not function during other repeat mode.  
Note:  
• To cancel point A, press [CLEAR] at step 2 in  
“Repeat A-B Playback.  
Press [CLEAR] to erase the last track in the program if you  
make an error.  
• Stopping playback will cancel repeat A-B playback.  
To erase all programmed tracks at once, select “ALL CLEAR”  
and press [OK] at step 2.  
While a program is being played back, [STOP C] works as  
follows:  
Random Playback  
- Pressing [STOP C] once: The track will be in the resume  
standby mode. Next time you press [PLAY B], the playback  
will resume from the point where it is stopped in the  
programmed playback.  
CD  
This function shuffles the playing order of tracks instead of playback in the sequence.  
- Pressing [STOP C] twice: Resume mode will be canceled.  
Next time you press [PLAY B], playback will restart  
from the first track in the original order. However, your  
programmed playback can be restarted when you follow  
the above steps. (Your programs are still stored until either  
the disc is ejected or the unit is turned off.)  
- On some discs, [STOP C] will not work while the resume  
message appears. Please wait until the message disappears.  
To repeat the current track in the program, follow the steps 1  
and 2 in “Repeat Playback” on page 41 and select “TRACK.  
To repeat the entire program, follow the steps 1 and 2 in  
“Repeat Playback” on page 41 and select “ALL”.  
Turning off the unit or ejecting the disc will erase the  
program.  
In stop mode, press [MODE] repeatedly until “RANDOM”  
menu appears.  
1
RANDOM  
CD-DA  
TOTAL 0:45:55  
RANDOM PROGRAM  
--no indication--  
PLAY  
Press
[PLAY B] to start random playback.  
2
You cannot use [the Number buttons] to select another  
track during programmed playback. Use [SKIP H / G] to  
select other tracks in the program.  
Note:  
You cannot combine random playback with programmed  
playback.  
You cannot alter a programmed order during playback.  
You can start programmed playback only while in  
“PROGRAM” menu.  
To repeat the current track in the random mode, follow the  
steps 1 and 2 in “Repeat Playback” on page 41 and select  
TRACK.  
To repeat the entire random selections, follow the steps 1  
and 2 in “Repeat Playback” on page 41 and select “ ALL”.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
On-screen Display  
You can check the information about the current disc by pressing [INFO]  
on the remote control.  
DVD  
CD  
appears only when multi-  
angle is available on the DVD  
current playback status  
current playback status  
4/12 0:03:21 - 0:02:15  
T
11/16 0:00:00 - 0:03:30  
remaining time of the current  
remaining time of the current  
chapter  
elapsed time of the current  
chapter  
track  
elapsed time of the current track  
TR (Track):  
current track number /  
total tracks  
CH (Chapter):  
current chapter number /  
total chapters  
ALL:  
current track number /  
total tracks  
current repeat setting appears only  
when the repeat setting is active  
T : Track repeat  
4/12 0:13:45 - 0:45:40  
T
1/3 0:00:00 - 1:23:45  
remaining time of the current title  
elapsed time of the current title  
A : All tracks repeat  
B : A-B repeat  
remaining time of the entire disc  
A
TT (Title):  
current title number / total titles  
elapsed time of the entire disc  
T
L1  
layer number, appears only when  
playing a 2-layered disc  
L0 : Layer 0 is playing  
Note:  
When you are playing back an audio CD in program or  
L1 : Layer 1 is playing  
random mode, “  
PROGRAM” (or “  
RANDOM”) will be  
displayed instead of  
current repeat setting appears  
only when the repeat setting is  
active  
Special Settings  
Subtitle LLaannguage  
C : Chapter repeat  
T : Title repeat  
B : A-B repeat  
A
DVD  
bit rate indication for the amount  
of audio and video data currently  
being read  
This unit allows you to select a subtitle language (if available) during DVD  
playback.  
During playback, press [MODE] repeatedly until  
1
“ appears.  
2
[Cursor K / L] repeatedly until your desired  
language appears.  
(
)
1.ENG / 6 SUBTITLE  
subtitles can be varied on the  
displayed number.  
current subtitles language.  
• Each time you press [Cursor K / L], the subtitle  
language changes as shown on the next page.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PERATING DVD  
O
OFF  
ENG  
(no subtitles)  
Camera Angles  
DVD  
(English subtitles)  
(French subtitles)  
Some DVD may contain scenes which have been shot  
simultaneously from various angles. You can change the  
camera angle if “ ” appears on the screen. If “ANGLE ICON”  
is set to “OFF” in “OTHERS” menu, “ ” will not appear. Refer  
to page 49.  
FRE  
Press [BACK] to exit.  
3
During playback, press [MODE] repeatedly until  
1
“ appears.  
Note:  
To cancel the subtitle, select “OFF” at step 2.  
If your language is not shown after pressing  
[Cursor K / L] repeatedly until your desired  
camera angle appears.  
2
3
[Cursor K / L] several times, the disc may not have that  
language. However, some discs allow you to change subtitle  
languages setting in the disc menu. (Operation varies  
depending on the disc, so refer to the manual along with  
the disc.)  
(
)
1 / 8 ANGLE  
• When “NOT AVAILABLE” appears on the TV screen, it means  
no subtitle is recorded on the scene.  
angles can be varied on the  
displayed number.  
If you choose a language that has 3-letter-language code,  
the code will be displayed every time you change the subtitle  
language setting. If you choose any other languages, “---”  
will be displayed instead. Refer to page 50.  
Press [BACK] to exit.  
Ejecting the disc will cancel your subtitle setting.  
Black Level Setting  
Audio Laannguage  
DVD  
DVD  
Adjust the black level to make the dark areas of the TV picture brighter.  
This unit allows you to select an audio language (if multiple languages are  
available) during DVD playback.  
During playback, press [SAP/AUDIO] repeatedly until  
the desired language appears.  
During playback, press [MODE] repeatedly until “  
appears.  
1
1.ENG Dolby D 3/2.1ch 48k/3  
(
)
OFF BLACK LEVEL  
audio can be varied on the displayed  
number.  
current audio language.  
Press [Cursor K / L] to adjust the black level.  
2
3
• Each time you press [SAP/AUDIO], the audio  
language changes as example below.  
(
)
ON BLACK LEVEL  
ENG  
SPA  
FRE  
(English audio)  
(Spanish audio)  
(French audio)  
: Makes the dark areas brighter.  
OFF: Shows the original picture as recorded.  
Press [BACK] to exit.  
Note:  
Some discs will only allow you to change the audio setting  
from the disc menu. Refer to the manual accompanying the  
discs for details.  
Note:  
If your language is not shown after pressing [SAP/AUDIO]  
several times, the disc may not have that language.  
However, some discs allow you to change multiple audio  
languages setting in the disc menu. (Operation varies  
depending on the disc, so refer to the manual along with  
the disc.)  
The setting will be kept even if the unit is turned off.  
When “NOT AVAILABLE” appears on the TV screen, it means  
audio language is not available.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Stteerreeoo SSoouunndd MMoode  
Maarrkerr Setupp  
This feature allows you to assign a specific point on a disc to be called back later.  
To set a marker  
CD  
This unit allows you to select a sound mode during CD playback.  
During playback, press [MODE] repeatedly until  
1
” / “  
” appears.  
During playback, press [SAP/AUDIO] repeatedly until  
the desired sound mode appears.  
e.g.) DVD  
_ _ /12 (SEARCH)  
STEREO  
K
L
Use [Cursor  
appears.  
/
] repeatedly until marker search menu  
2
Each time you press [SAP/AUDIO], the sound mode  
changes as example below.  
1
2
3
4
5
6
7
8
9
10 AC  
STEREO
(stereo sound with left and  
right channels)  
(left channel sound only)  
L-ch  
R-ch  
[Cursor  
60 seconds.  
s
/
B] to select an available marker within  
3
4
(right channel sound only)  
1
2
3
4 5 6 7 8 9 10 AC  
Note:  
• Virtual surround cannot be changed when the sound mode  
is set to either “L-ch” or “R-ch.  
want to set a marker, press [OK].  
Virtual Surround  
You can enjoy virtual surround on your 2 channel stereo system.  
• Marker is now set.  
2
3
4 5 6 7 8 9 10 AC  
During playback, press [MODE] repeatedly until “  
appears.  
1
Press [BACK]
to exit.  
5
(
)
OFF SURROUND  
To return to the marker later  
Press [Cursor K / L] to select the sound level.  
2
Repeat steps 1-2 in “To set a marker. Use [Cursor  
to select the desired marker.  
e.g.) DVD  
s
/
B]  
1
(
)
1
SURROUND  
2
3
4
5
6
7
8
9
10 AC  
1 :  
Natural effect.  
2 :  
Emphasized effect.  
OFF : No effects (original sound).  
[OK] at the desired marker to restart playback  
from the specific point which you set.  
2
Press [BACK] to exit.  
3
2
3
4
5
6
7
8
9
10 AC  
Note:  
• The setting will be kept even if the unit is turned off.  
• For audio CD, virtual surround will not be effective if the  
sound mode is set to something other than “STEREO.  
Refer to “Stereo Sound Mode” on page 45.  
Note:  
• Marker search menu will disappear in about 60 seconds  
when there is no input.  
You can mark up to 10 points.  
• Turn down the level or select “OFF” if the sound is distorted.  
• To clear a marker, select the marker to be cleared, and then  
press [CLEAR]  
• Ejecting the disc or turning off the power will erase all  
markers.  
Selecting “  
also erase all markers.  
” at step 3 in the section “To set a marker” will  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
VD SETTING  
D
Settings are only effective when the unit is in DVD mode and any discs should not be played back.  
DVD Language Setting  
You can change the desired language when playing back the disc.  
Press [MENU] to display the main menu.  
SUBTITLE *1, *2  
Select the desired subtitle language.  
(Default: OFF)  
1
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
LANGUAGE  
SUBTITLE  
Tint  
Sharpness  
Color Temperature  
0
OFF  
Normal  
ENGLISH  
FRENCH  
SPANISH  
ENTER/OK  
GERMAN  
ITALIAN  
SWEDISH  
K
L
Use [Cursor  
/
] to select “DVD, then press [OK]  
2
3
(Default: ENGLISH)  
PICTURE  
SOUND  
Select the desired language in DVD menu.  
Press “OK” key to move to DVD setup.  
SETUP  
FEATURES  
LANGUAGE  
DVD  
LANGUAGE  
DISC MENU  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
[Cursor  
s
/
B] to select“  
”, then press [OK]  
ENTER/OK  
ITALIAN  
SWEDISH  
DUTCH  
LANGUAGE  
Note:  
AUDIO  
ORIGINAL  
OFF  
SUBTITLE  
DISC MENU  
To change the on-screen language, call up “LANGUAGE”  
from the main menu and set the desired language.  
Refer to “Language Selection” on page 24.  
*1  
ENGLISH  
ENTER/OK  
Language options are not available with some discs.  
If “OTHER” is selected in “AUDIO, SUBTITLE” or  
“DISC MENU” menu, press 4-digit number to enter the code  
for the desired language. Refer to “Language Code List” on  
page 50.  
K
L
Use [Cursor  
[OK]  
/
] to select the desired item, then press  
4
5
Only the languages supported by the disc can be selected.  
*2  
Language setting for Audio and Subtitle are not available  
with some discs.  
Use [MODE] to select subtitles available on the DVD.  
Use [SAP/AUDIO] to select audio available on the DVD.  
If the DVD’s default settings for audio and subtitle are the  
same language, the subtitles may not show unless you  
turn them on.  
LANGUAGE  
AUDIO  
ORIGINAL  
OFF  
SUBTITLE  
DISC MENU  
ENGLISH  
ENTER/OK  
K
L
[Cursor  
[OK]  
/
] to select the desired item, then press  
Press [MENU] to exit.  
6
AUDIO *1, *2  
(Default: ORIGINAL)  
Select the desired audio language.  
LANGUAGE  
AUDIO  
ORIGINAL  
ENGLISH  
FRENCH  
SPANISH  
ENTER/OK  
GERMAN  
ITALIAN  
SWEDISH  
46  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Audio Setting  
Choose the appropriate audio settings for your equipment. It only affects  
during the playback of DVD.  
Press [MENU] to display the main menu.  
DOWN SAMPLING  
(Default: ON)  
1
This function is available only on digital outputting of a  
disc recorded in 96kHz.  
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
Tint  
Sharpness  
Color Temperature  
0
Normal  
AUDIO  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
K
s
K
L
ENTER/OK  
[Cursor  
[Cursor  
/
] to select “DVD, then press [OK]  
2
3
PICTURE  
SOUND  
ON : When outputting in 48kHz.  
OFF : When outputting the original sound.  
Press “OK” key to move to DVD setup.  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Note:  
When playing back a 96 kHz disc with the copyright  
protection or when ‘‘Virtual Surround” is set to “1” or  
“2, the sound will be down sampled at 48 kHz even if  
the “DOWN SAMPLING” is set to “OFF. Refer to “Virtual  
Surround” on page 45.  
/
B] to select “  
”, t hen press [OK]
.  
AUDIO  
DRC  
DOLBY DIGITAL  
(Default: BITSTREAM)  
ON  
Set to “BITSTREAM“ when this unit is connected to a  
Dolby Digital decoder.  
DOWN SAMPLING ON  
DOLBY DIGITAL  
BITSTREAM  
ENTER/OK  
AUDIO  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
L
Use
[Cursor  
[OK]  
/
] to select the desired item, then press  
4
ENTER/OK  
DRC (dynamic range control)  
(Default: ON)  
This function is available only on the discs which are  
recorded in the Dolby Digital format.  
BITSTREAM : Outputs Dolby Digital signals.  
PCM :  
Converts the Dolby Digital into PCM.  
(2 channel)  
AUDIO  
Press [MENU] to exit.  
5
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
ENTER/OK  
ON : Compress the range between soft and loud  
sounds.  
OFF : No effects (original sound).  
47  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VD SETTING  
D
Parental Setting  
K
L
Parental setting prevents your children from viewing inappropriate  
materials. (password protected.) Playback will stop if the ratings exceed  
the levels you set.  
Use [Cursor  
[OK]  
/
] to select the desired item, then press  
6
Press [MENU] to display the main menu.  
1
PARENTAL  
PARENTAL LEVEL  
ALL  
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
8
7
6
5
4
3
[ ADULT ]  
[ NC-17 ]  
[ R ]  
30  
60  
36  
0
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
ENTER/OK  
[ PGR ]  
[ PG13 ]  
[ PG ]  
Tint  
Sharpness  
Color Temperature  
0
Normal  
PARENTAL LEVEL  
ALL :  
8 [ADULT] :  
All parental locks are cancelled.  
All ratings (adult / general / children)  
can be played back.  
K
L
[Cursor  
/
] to select “DVD, then press [OK]  
2
3
7 [NC-17]-2 [G] : Only DVD intended for general use  
PICTURE  
SOUND  
and children can be played back.  
1 [KID SAFE] : Only DVD intended for children can  
be played back.  
Press “OK” key to move to DVD setup.  
SETUP  
FEATURES  
LANGUAGE  
DVD  
Press [MENU] to exit.  
7
Use [Cursor  
s
/
B] to select “  
”, t hen press [OK]
.  
To change the password  
PARENTAL  
K
L
Follow steps 1 to 4. Use [Cursor  
/
] to select  
5
“PASSWORD CHANGE, then press [OK]  
PARENTAL LEVEL ALL  
ENTER/OK  
PARENTAL  
PARENTAL LEVEL ALL  
PASSWORD CHANGE  
Use
[the Number buttons] to enter the 4-digit  
numbers for your password, then press [OK]  
4
ENTER/OK  
Use
[the Number buttons] to enter the new 4-digit  
password.  
6
PARENTAL  
Enter current password.  
ENTER/OK  
PARENTAL  
PASSWORD  
Please enter  
a
4-digit password.  
0
0
0
0
ENTER/OK  
Don’t forget the password.  
• If you have set password already, use  
[the Number buttons] to enter the current 4-digit  
password.  
Press ‘ENTER/OK’ to activate password.  
You cannot use the default password (4737) to play back  
a DVD.  
Note:  
K
L
DVD-video may not respond to parental lock settings. Make  
sure this function works with your DVD-video.  
Record the password in case you forget it.  
Use [Cursor  
/
] to select the “PARENTAL LEVEL”, then  
5
press [OK]
.  
If you forget the password, press [4] [7] [3] [7], then enter  
your new password. Password will be cleared and parental  
levels will be set to “ALL”.  
PARENTAL  
A power failure will not erase your password.  
PARENTAL LEVEL ALL  
PASSWORD CHANGE  
Press [MENU] to exit.  
7
ENTER/OK  
48  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
You can change the other functions.  
Press [MENU] to display the main menu.  
STILL MODE  
Set the picture quality in the still mode.  
If you select “AUTO, it automatically selects the best  
resolution setting (“FRAMEor “FIELD”) based on the  
date characteristics of the pictures.  
(Default: AUTO)  
1
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
SETUP  
FEATURES  
LANGUAGE  
DVD  
Color  
Tint  
Sharpness  
Color Temperature  
0
Normal  
FIELD :  
The picture in the still mode will be  
stabilized.  
FRAME : The picture in the still mode will be highly  
K
s
K
L
[Cursor  
[Cursor  
/
] to select “DVD, then press [OK]
.  
2
3
defined.  
PICTURE  
SOUND  
OTHERS  
Press “OK” key to move to DVD setup.  
SETUP  
ANGLE ICON  
STILL MODE  
AUTO POWER OFF ON  
ON  
AUTO  
FEATURES  
LANGUAGE  
DVD  
ENTER/OK  
/
B] to select “  
”, then press [OK]  
AUTO POWER OFF  
(Default: ON)  
Set to “ONto turn this unit off automatically after 20  
minutes of no use.  
OTHERS  
ANGLE ICON  
STILL MODE  
ON  
AUTO  
AUTO POWER OFF ON  
OTHERS  
ENTER/OK  
ANGLE ICON  
STILL MODE  
AUTO POWER OFF ON  
ON  
AUTO  
ENTER/OK  
L
Use [Cursor  
[OK]  
/
] to select the desired item, then press  
4
ANGLE ICON  
Set to “ON” to show the angle icon when multiple  
camera angles are available during DVD playback.  
(Default: ON)  
Press [MENU] to exit.  
5
OTHERS  
ANGLE ICON  
STILL MODE  
ON  
AUTO  
AUTO POWER OFF ON  
ENTER/OK  
49  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VD SETTING  
D
Reset to the Default Setting  
Language Code List  
You can reset all the settings except for the parental setting and on-screen  
Language  
Code  
Language  
Marathi  
Code  
5964  
5961  
5960  
6047  
6051  
6061  
A-B  
menu language.  
Abkhazian  
Afar  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian [NOR]  
Press [MENU] to display the main menu.  
1
Afrikaans  
Albanian  
Amharic  
Arabic  
PICTURE  
SOUND  
Smart Picture  
Brightness  
Contrast  
Personal  
30  
60  
36  
0
Armenian  
Assamese  
Aymara  
SETUP  
O-R  
FEATURES  
LANGUAGE  
DVD  
Color  
Occitan  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish [POL]  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
Singhalese  
Siswat  
Slovak  
Slovenian  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE]  
T
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Tint  
Sharpness  
Color Temperature  
0
Azerbaijani  
Bashkir  
Normal  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
K
s
K
L
[Cursor  
[Cursor  
/
] to select “DVD, then press [OK]  
2
3
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
PICTURE  
SOUND  
C-E  
Press “OK” key to move to DVD setup.  
SETUP  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
FEATURES  
LANGUAGE  
DVD  
Chinese [CHI]  
Corsican  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Croatian  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
/
B
] to select “  
”, t hen press [OK]  
F-H  
Faroese  
Fiji  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
INITIALIZE  
Finnish [FIN]  
French [FRE]  
Frisian  
Initialize?  
NO  
YES  
Galician  
ENTER/OK  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
L
Use [Cursor  
/
] to select “YES, then press [OK]  
Gujarati  
4
5
Hausa  
Hebrew  
Hindi  
Hungarian [HUN]  
INITIALIZE  
Tagalog  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
I-K  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Initialize?  
NO  
YES  
ENTER/OK  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Note:  
Kannada  
Tsonga  
When you want to cancel the initialization, select “NO” at  
step 4, then press [OK]  
Kashmiri  
Turkish [TUR]  
Turkmen  
Twi  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Press [MENU] to exit.  
U-Z  
Korean [KOR]  
Kurdish  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
L-N  
Laothian  
Latin  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
Latvian;Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Note:  
If you choose a language that has a 3-letter abbreviation,  
the code will be displayed every time you change the audio  
or subtitle language setting above. If you choose any other  
language, ‘---’ will be displayed instead. (3-letter abbreviation is  
written in bracket.)  
50  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ROUBLESHOOTING  
T
FAQ  
Question  
Answer  
• Check 
the antenna or cable connection to the main unit.  
• Check 
the batteries of the remote control.  
• Check 
if there is an obstacle between the infrared sensor window and the  
remote control.  
• Test the signal output. If OK, then possible infrared sensor trouble.  
Refer to “IR Signal Checkon page 54.  
My remote control does not work.  
What should I do?  
• Aim the remote control directly at the infrared sensor window on the  
front of the unit.  
• Reduce
 
the distance to the unit.  
• Re-insert the batteries with their polarities (+/– signs) as indicated.  
• When there is an infrared-equipped device such as PC near this unit, it  
may interrupt the remote control signal of this unit.  
• Move the infrared-equipped device away from this unit, change the angle  
of the infrared sensor or turn off the infrared communication function.  
How come the Initial setup appears every  
time I turn on this unit?  
• Connect the RF coaxial cable to the unit directly and run the initial setup.  
• Make sure to complete the channel scan before turning off the unit.  
• Make sure autoprogram has been completed.  
Refer to “Autoprogramon page 22.  
• Autoprogram must be completed when you set up the unit for the first  
time or move it to a location where previously unavailable channels are  
broadcast.  
• The selected channel may not be broadcasting.  
• When autoprogram is interrupted and not completed,  
some channels will not be received. Make sure to complete.  
Refer to “Autoprogramon page 22.  
Why I cannot watch some TV programs.  
• The selected channel cannot be viewed by the “Child Locksetting.  
Refer to ‘‘Child Lockon page 30.  
• The unit requires some kind of antenna input. An indoor antenna  
(VHF /UHF), an external antenna (VHF /UHF) or an RF coaxial cable from  
your wall cable/satellite box needs to be plugged into the unit.  
• Check if the right input mode is selected by pressing [SOURCE] or using  
[CH + / ]. Refer to “Switching Each Input Modeon page 19.  
• Check the antenna or cable connection to the unit.  
• When using the Component Video Connection check that the Green  
(Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their  
corresponding colored jacks on the unit.  
How come there is no image from the  
connected external devices?  
• Many digital channels have alternate channel numbers. The unit changes  
the numbers automatically to the ones signifying the broadcasting  
stations. These are the numbers used for analog broadcasts.  
Whenever I entered channel number,  
it changes automatically.  
• Clean the disc.  
• Ensure the disc is correctly inserted.  
• Check if the disc is defective by trying another disc.  
• Cancel the parental lock or change the control level.  
• Insert a correct disc that plays back on this unit.  
• Handle a disc with special care so that it does not have fingerprints,  
scratches or dusts on its surface.  
My disc cannot be played back.  
Is there any way I can play my disc?  
• Captions that are delayed a few seconds behind the actual dialogue are  
common for live broadcasts. Most captioning production companies can  
display a dialogue to maximum of 220 words per minute. If a dialogue  
exceeds that rate, selective editing is used to insure that the captions  
remain up-to date with the current TV screen dialogue.  
Why are captions not displayed entirely?  
Or, captions are delayed behind the  
dialogue.  
How can I set the clock ?  
• There is no clock function on this unit.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ROUBLESHOOTING  
T
Troubleshooting Guide  
If the unit does not perform properly when operated as instructed in this manual,  
check the following chart and all connections once before calling for service.  
Symptom  
Remedy  
Make sure the AC power cord is plugged in.  
• Make sure that the AC outlet supplies the proper voltage, plug another electrical  
appliance into the AC outlet.  
• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit  
to reset itself.  
No power  
Press only one button at a time. Do NOT press more than one buttons at the same  
time.  
Control button does not work.  
• Check whether the connection of the antenna, cable receiver or satellite box is  
connected correctly.  
• Check whether all the cables to the unit are connected to the correct output jack  
of your device like BD/DVD recorder.  
• Make sure that the selected input mode is connected to the working input jack.  
• Check if your computer is NOT in sleep mode when the input mode of this unit is  
in PC mode. Tap any key on the keyboard to wake up your computer.  
Power is ON but no screen  
image.  
Check if the power is on.  
• Check if the right input mode is selected.  
Check whether all the cables to the unit are connected to the correct output jack  
of your device like BD/DVD recorder.  
View other TV channels. The problem might be limited to the broadcasting station.  
• Turn off the unit and wait for about 1 minute, then turn on the unit again.  
Check whether the connection of the antenna, cable receiver or satellite box is  
connected correctly.  
No picture or sound  
Make sure that the selected input mode is connected to the working input jack.  
• Check if your computer is NOT in sleep mode when the input mode of this unit is  
in PC mode. Tap any key on the keyboard to wake up your computer.  
• Make sure that the sound is not muted. Press [MUTE] so that the volume bar and  
current volume level will appear on the TV screen.  
T
Make sure that the volume is NOT set to “0or “Mute. If so, use [VOL
+
/ ] to  
V
adjust the desired volume.  
View other TV channels. The problem might be limited to the broadcasting station.  
• Adjust “Colorin the main menu.  
No color  
Adjusted ‘‘PICTUREor ‘‘SOUND” • You must set ”Homein ”Location. Refer to page 35.  
is not effective every time turn  
on the unit.  
Otherwise, the settings you adjusted will not be memorized after you turn off the  
unit.  
Electrical interference from nearby appliances may affect picture quality.  
Adjust “Contrastand “Brightnessin the main menu.  
View other TV channels. The problem might be limited to the broadcasting station.  
For the best picture quality, watch “high definitionwide screen programs.  
If the HD content is not available, watch “standard definitionprograms instead.  
Sound OK, picture poor  
View other TV channels. The problem might be limited to the broadcasting station.  
Check if the audio cable is connected in correctly.  
Picture OK, sound poor  
• You may be getting interference from electrical appliances, automobiles,  
motorcycles or fluorescent lights.  
• Try moving the unit to another location to see if this is the cause of the problem.  
You see a distorted picture or  
hear an unusual sound.  
Ghosts, lines or streaks in  
picture  
Electrical interference from nearby appliances may affect picture quality.  
• View other TV channels. The problem might be limited to the broadcasting station.  
• When the capabilities of the unit exceed the capabilities of the digital  
broadcasting, the signal will be increased to match the capabilities of the display  
of the unit. This may cause noise or trash.  
You see “noiseor “trashon the  
screen.  
Different color marks on the TV  
screen  
View other TV channels. The problem might be limited to the broadcasting station.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Symptom  
Remedy  
• This unit will memorize the volume level from the last time you adjusted it.  
• If the volume of the sound from another device is higher or lower, then the  
loudness will change.  
You switch to a different input  
and the volume.  
You switch to a different input  
and the screen size changes.  
This unit will memorize the viewing mode from the last time you used the  
particular input modes.  
If you are using the unit as a PC monitor, make sure that “Horizontal Positionand  
“Vertical Positionin “PC Settingsare set correctly.  
If you are watching TV or using the Video, S-Video, Component video or HDMI with  
480i Input, press [FORMAT] repeatedly to switch various screen modes.  
The display image does not  
cover the entire screen.  
T
Captions are displayed as a  
white box.  
No caption is displayed in the  
Closed Caption-supported  
program.  
Interference from buildings or weather conditions may cause captioning to be  
incomplete.  
Broadcasting station may shorten the program to insert advertisement.  
The closed caption decoder cannot read the information of the shortened  
program.  
V
No caption is displayed when  
playing back a disc or a cassette  
tape containing captions.  
• The disc or cassette tape may be illegally copied, or the caption signal might not  
have been read during copying.  
Black box is displayed on the TV  
screen.  
The text mode is selected for caption. Select “CC-1, CC-2, CC-3, CC-4or “Off.  
Make sure the disc is compatible with the unit.  
Completely distorted picture or  
black/white picture with DVD.  
Picture freezes momentarily  
during playback.  
• Check the disc for finger prints/scratches and clean with a soft cloth wiping from  
center to edge.  
Clean the disc.  
Ensure the disc is correctly inserted.  
Check if the disc is defective by trying another disc.  
Cancel the parental lock or change the control level.  
Insert a correct disc that plays on this unit.  
Handle a disc with special care so that it does not have fingerprints, scratches, or  
dusts on its surface.  
Disc cannot be played.  
D
V
D
Buttons do not work or the unit To completely reset the unit, unplug the AC power cord from the power outlet for  
stops responding.  
5-10 seconds.  
The unit does not respond to  
some operating commands  
during playback.  
• Operations may not be permitted by the disc. Refer to the instructions of the disc.  
• The angle cannot be switched for DVD which do not contain multiple angles. In  
some cases multiple angles are only recorded for specific scenes.  
Angle does not switch.  
Playback does not start when  
the title is selected.  
Check the “PARENTALsetting.  
The password for rating level  
has been forgotten.  
• Enter the default password (4737), then your forgotten password will be cleared.  
Note:  
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of  
blue, green or red. This is not to be considered a defect in the LCD screen.  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on  
correct operations.  
Some functions are prohibited on some discs.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
NFORMATION  
I
Glossary  
ATSC  
Dolby Digital  
Region Code  
Acronym that stands for Advanced  
Television Systems Committee and the  
The system developed by Dolby  
Laboratories to compress digital sound. It  
Regions associate discs and players with  
particular areas of the world.  
name of the digital broadcasting standards. offers stereo sound (2ch) or multi-channel  
This unit will only play back discs that have  
compatible region codes.  
You can find the region code of your unit  
by looking on the rear panel.  
Some discs are compatible with more than  
one region (or all regions).  
audio.  
Aspect Ratio  
HDMI  
The width of a TV screen relative to its  
height. Conventional TVs are 4:3 (in other  
words, the TV screen is almost square);  
widescreen models are 16:9 (the TV screen  
is almost twice as wide as its height).  
(High-Definition Multimedia Interface)  
Interface that supports all uncompressed,  
digital audio/video formats including  
set-top box, BD/DVD recorder or digital  
television, over a single cable.  
SAP (Secondary Audio Program)  
Second-audio channel delivered separately  
from main-audio channel. This audio  
channel is used as an alternate in bilingual  
broadcasting.  
CEC (Consumer Electronics Control)  
HDTV (High Definition TV)  
Ultimate digital format that produces high  
resolution and high picture quality.  
This allows you to operate the linked  
functions between our brand devices  
with CEC feature and this unit. We do not  
guarantee 100% interoperability with other  
brands of CEC compliant devices.  
SDTV (Standard Definition TV)  
Standard digital format that is similar to the  
NTSC picture quality.  
NTSC  
Acronym that stands for National Television  
Systems Committee and the name of the  
current analog broadcasting standards.  
Off the air NTSC signals will no longer be  
sent by broadcasting stations during 2009.  
Component video  
S-Video  
This is a video signal format that conveys  
each of 3 principal colors of light (red,  
blue and green) through different signal  
lines. This allows the viewers to experience  
picture colors as original as it is. There are  
several signal formats, including Y / Pb / Pr  
and Y / Cb / Cr.  
Offers higher quality images by delivering  
each signal, color (c) and luminance (y)  
independently of each other through a  
separate cable.  
Password / PIN Code  
A stored 4-digit number that allows access  
to parental control features.  
Maintenance  
Cabinet Cleaning  
• Wipe the front panel and other exterior surfaces of the  
unit with a soft cloth immersed in lukewarm water and  
wrung dry.  
• Never use a solvent or alcohol. Do not spray insecticide  
liquid near the unit. Such chemicals may cause damage  
and discoloration to the exposed surfaces.  
Servicing  
Should your unit become inoperative, do not try to correct  
the problem yourself. There are no user serviceable parts  
inside. Turn off the unit, unplug the AC power cord and call  
our toll free customer support line found on the cover of  
this manual to locate an authorized service center.  
If the Laser Optical Pickup Unit is Dirty  
Panel Cleaning  
Wipe the panel of the unit with a soft cloth. Before  
cleaning the panel, disconnect the AC power cord.  
If the unit still does not perform properly when it is  
operated, while referring to the relevant sections and to  
"Troubleshooting Guide" in this user manual, the laser  
optical pickup unit may be dirty. Consult your dealer or an  
Authorized Service Center for inspection and cleaning of  
the laser optical pickup unit.  
Disc Handling  
Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
IR Signal Check  
If the remote control is not working properly, you can use  
a digital camera (including a cellular phone with built-in  
camera) to see if it is sending out an infrared signal.  
• With a digital camera  
• Always store the disc in its protective case when it is not  
used.  
(including built-in cell phone cameras):  
Point the Digital Camera towards the  
• To clean-off, use a soft cloth.  
remote control infrared diode at the front  
of the remote control. Press any button on  
the remote control and look through the  
camera display. If the infrared pulsating  
light appears through the camera, the  
Do not use a hard cloth since this will mar the disc.  
• Wipe the disc in a straight line form center to edge.  
Never wipe with a circular motion.  
remote control is sending out an IR signal.  
• Do not use detergent or abrasive cleaning agents.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
General Specifications  
Other Specifications  
Terminals:  
TV  
Antenna Input: VHF / UHF / CATV  
Audio Input: RCA jack (L/R) x 6  
Video Input: RCA jack x 1  
S-Video Input: Mini DIN 4-pin jack x 1  
75Ω unbalanced (F-type)  
500mV rms  
TV format:  
Closed caption system:  
§15.122 / FCC (digital CC)  
§15.119 / FCC (analog CC)  
ATSC / NTSC-M TV standard  
1V p-p (75Ω)  
Y:
1V p-p (75Ω)  
C:
286mV p-p (75Ω)  
Channel coverage (ATSC / NTSC):  
Terrestrial  
CATV  
VHF:
2~13
UHF:
14~69  
2~13, A~W,  
Component video Input:  
RCA jack x 3  
Y:  
1V p-p (75Ω)  
W+1~W+94 (analog W+1~W+84),  
A-5~A-1, 5A  
Pb/Cb: 700mV p-p (75Ω)  
Pr/Cr: 700mV p-p (75Ω)  
Tuning system:  
Channel access:  
Channel frequency synthesized tuning system  
Direct access keyboard,  
HDMI Input: [37MD350B] HDMI 19pin x 3  
[32MD350B] HDMI 19pin x 2  
Coaxial Digital audio Output:  
RCA jack x 1  
Programmable scan, and up / down  
500mV p-p (75Ω)  
500mV rms  
DVD  
Audio Output: RCA jack (L/R) x 2  
Discs (playback compatibility):  
DVD-video, DVD-RW/-R,  
audio CD, CD-RW/-R  
Remote control:
 
Digital encoded infrared light system  
Operating temperature:  
41°F (5°C) to 104°F (40°C)  
Frequency response:  
DVD (linear sound): 20 Hz to 20 kHz (sample rate: 48 kHz)  
Power requirements:  
20 Hz to 44 kHz (sample rate: 96 kHz)  
20 Hz to 20 kHz  
120V~ AC +/- 10%, 60Hz +/- 0.5%  
CD:  
Signal-to-noise ratio (S/N ratio):  
CD:
90 dB (JEITA)  
[37MD350B]  
Power consumption (maximum):  
Total distortion factor:  
165W  
37 inches  
DVD:  
CD:  
1 KHz 0.007% (JEITA)  
1 KHz 0.007% (JEITA)  
LCD:  
Dimensions: <without stand>  
<with stand>  
W: 35.9 inches (910.0mm) 35.9 inches (910.0mm)  
H: 23.7 inches (600.0mm) 25.2 inches (638.0mm)  
D: 5.1 inches (127.5mm) 10.2 inches (257.0mm)  
27.74 lbs. (12.58kg) 29.92 lbs. (13.57kg)  
Electrical Specification  
Audio Output:  
10W, 8Ω x 2  
Weight:  
[32MD350B]  
Power consumption (maximum):  
150W  
LCD:  
32 inches class (31.5 inches measured diagonally)  
Dimensions: <without stand>  
<with stand>  
W: 30.0 inches (760.0mm) 30.0 inches (760.0mm)  
H: 20.5 inches (519.3mm) 22.2 inches (563.0mm)  
D: 5.1 inches (127.5mm) 9.4 inches (238.0mm)  
20.51 lbs. (9.30kg) 21.61 lbs. (9.80kg)  
Weight:  
• Designs and specifications are subject to change without notice and without  
our legal obligation.  
• If there is a discrepancy between languages, the default language will be  
English.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
LIMITED WARRANTY  
( )  
(
)
NINETY 90 DAY LABOR / ONE 1 YEAR PARTS  
WARRANTY COVERAGE:  
This warranty obligation is limited to the terms as set forth  
below.  
mission, or (d) if any serial number has been removed or defaced,  
or (e) product, accessories or consumables sold “AS IS” without  
warranty of any kind by including refurbished product sold “AS  
IS” by some retailers.  
WHO IS COVERED:  
This product warranty is issued to the original purchaser or the  
person receiving the product as a gift against defects in materials  
and workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
This Limited Warranty does not cover:  
Shipping charges to return defective product.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
WHAT IS COVERED:  
This warranty covers new products if a defect in material or  
workmanship occurs and a valid claim is received within the  
Warranty Period. At its option, the company will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or most  
comparable to the original product in current inventory, or (3)  
refund the original purchase price of the product.  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of the company.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product.  
Replacement products or parts provided under this warranty are  
covered against defects in materials and workmanship from the  
date of the replacement or repair for ninety (90) days or for the  
remaining portion of the original product’s warranty, whichever  
provides longer coverage for you. When a product or part is  
exchanged, any replacement item becomes your property and the  
replaced item becomes company property. When a refund is  
given, your product becomes company property.  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
can be provided.  
Failure to operate per Owner’s Manual.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
TO OBTAIN ASSISTANCE…  
Contact the Customer Care Center at:  
1-866-341-3738  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all requirements  
can result in delay.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY  
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  
ON THIS PRODUCT IS LIMITED IN DURATION TO THE  
DURATION OF THIS WARRANTY.  
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-  
TATIONS:  
This Limited Warranty applies only to new company manufac-  
to any hardware product or any software, even if packaged or  
sold with the product, as manufacturers, suppliers, or publishers  
may provide a separate warranty for their own products pack-  
aged with the bundled product.  
The company is not liable for any damage to or loss of any pro-  
grams, data, or other information stored on any media contained  
within the product, or other additional product or part not cov-  
ered by this warranty. Recovery or reinstallation of programs,  
data or other information is not covered under this Limited  
Warranty.  
Some states do not allow the exclusions or limitation of inciden-  
tal or consequential damages, or allow limitations on how long an  
implied warranty lasts, so the above limitations or exclusions may  
not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-supplied product,  
(b) to damage caused by service performed by anyone other than  
company approved Authorized Service Location, (c) to a product  
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501  
Printed in China  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Learning Resources Baby Toy ler5404 User Manual
LG Electronics Washer Dryer Washer W1119 User Manual
Lux Products Thermostat T10 1141 User Manual
Mackie Speaker SA1530Z User Manual
Marshall electronic Flat Panel Television V R82DP HDSDI User Manual
Maytag Water Heater HXN4975S User Manual
Meade Telescope RCX400TM User Manual
Melissa Microwave Oven 753 076 User Manual
Mellerware Hair Care Product MA203152 0 W User Manual
Mellerware Styling Iron 20330 User Manual