Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated ’’dangerous
voltage’’ within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within a triangle is intended to alert the user to the
presence of important operation and maintenance (servicing) instructions
in the literature accompanying the product.
FCC RF INTERFERENCE STATEMENT
NOTE:
This equipment has been tested and found to comply with the limit for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does not cause harmful interference to radio or television reception which
can be determined by turning the equipment off and on, the user is encourage to try to
correct the interference by one or more of the following measure.
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Correct the equipment into an outlet on a circuit different from that to which the receiver
●
●
is connected.
●
Consult the dealer or an experienced radio, TV technical for help.
Only shielded interface cable should be used.
●
page2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY PRECAUTIONS
The present set has been designed and manufactured to assure personal safety. Improper use
can result in electric shock or fire hazard. The safeguards incorporated in the present unit will
protect you if you observe the following procedures in installing, using and servicing. The present
unit is fully transistorized and does not contain any element that can be repaired by the user.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and
request a qualified service person to perform repairs.
a) When the AC cord or plug is damaged.
b) When a liquid was spilled on the product or when objects have fallen into the product.
c) When the product has been exposed to rain or water.
page3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY PRECAUTIONS
d) When the product does not operate properly as described in the operating instructions. Do
not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often
requires extensive adjustment work by a qualified technician.
e) When the product has been dropped or damaged.
f) When the product displays an abnormal condition. Any noticeable abnormality in the product
indicates that the product needs servicing.
16. Replacement parts - In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same
characteristics and performance as the original parts. Use of unauthorized parts can result in
fire, electric shock and/or other danger.
17. The LCD panel used in this product is made of glass. Therefore, it can be broken when the
product is dropped or gets shock. Be careful not to be injured by glass pieces in case the
panel is broken.
18. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving
you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a
fixed blue, green or red point. Please note that this does not affect your product’s performance.
page4
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSORIES
Make sure the following accessories are provided with the product.
Power adapter
Remote control
Owner′s Manual
AAA batteries
Warranty card
Quick setup guide
page5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
INSERTING BATTERIES INTO THE REMOTE CONTROL
Insert supplied batteries via the battery compartment on the back of the remote control.
Make sure polarity matches the (+) and (-) marks inside the compartment.
+
-
-
+
USING THE REMOTE CONTROL UNIT
●
Use the remote control by pointing it towards the remote
sensor on the TV. Objects between the remote control and
the sensor may disrupt operation.
●
Effective range is 20 feet but is dependant on what your
viewing angle is.
●
Range can also be affected by direct sunlight on the TV’s
sensor.
CAUTIONS REGARDING REMOTE CONTROL UNIT
●
Do not expose remote to liquids, direct sunlight or shock.
●
The remote control unit may not work properly if the remote sensor window of the Display is
under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display,
or operate the remote control unit closer to the remote sensor window.
page6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
POWER
Use to turn the unit on and off.
MPX
Use to select the sound multiplex
mode. (See page 16.)
Number Buttons
Use to set the channel and to enter
DVD chapter numbers.
OSD
Use to bring up the DVD On-
CAPTION
Use to select close caption mode.
Screen-Display.
OPEN( )
VOLUME+/-
Use to eject the disc being played
in the disc slot, the main unit must
be set to DVD status.
Use to adjust the volume.
LAST
Press to return to the previous
channel in normal viewing mode.
AUTO
TV/DVD/AUX/PC
Use to bring up the AV signal source
Auto adjustment for PC signals.
selection screen and use the
/
MUTE
Mute the sound.
buttons to select between: TV, DVD,
AV1-S-Video, AV2-Video, AV3-
Component, PC-Analog(VGA), PC-
Digital(DVI), and press the OK
button to confirm.
CH+/-
Use to skip to the previous/next
channel.
Cursor Buttons
Use to navigate in menus.
TV MENU
Use to bring up TV menu; and
OK
exits TV menu by pressing again.
Use to confirm your selections.
DVD MENU
Use to bring up the DVD root
DVD TITLE
Use to bring up the DVD title menu.
menu.
PLAY
Use to begin the DVD playback.
STOP
Use to stop the DVD playback.
PAUSE
Use to pause the DVD playback.
FF/FR
Use to play DVD fast forward/
PREV/NEXT
Use to skip to the previous/next
chapter.
backward.
RETURN
Return to the previous menu
ZOOM
Use to zoom the DVD playback
picture.
screen.
SETUP
Use to bring up DVD setup menu.
SLOW
Use to slow the DVD playback speed.
P. MODE
Use to shift DVD play mode.
WIDE
In DVD mode, use to set TV
REMAIN
display mode.
Use to display the time of the DVD
playback.
ANGLE
Use to shift DVD viewing angle.
A. MODE
Use to shift the DVD playback audio
mode.
REPEAT
Use to repeat the DVD playback.
AUDIO
Use to shift DVD audio language.
SUBTITLE
Use to shift DVD subtitle language.
page7
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
4
5
6
7
FRONT VIEW
8
PLAY
CH
CH
VOL
VOL
T V / D V D / A U X / P C
9
Slot-load
DVD Player
PAUSE
10
PREV
NEXT
11
12
13
EJECT
1
2
3
1) REMOTE SENSOR
2) POWER ON INDICATOR
3) STANDBY INDICATOR
4) POWER BUTTON: Use to turn the unit on and off.
5) TV/DVD/AUX/PC: Use to select the AV signal source among: TV, DVD,AV1-S-Video, AV2-
Video, AV3-Component,PC-Analog(VGA), PC-Digital(DVI) and use the OK button to confirm.
6) CH+/-: To skip to the previous/next channel.
7) VOLUME+/-: Use to adjust the volume.
8) DISC SLOT: Insert a DVD or CD disc to play under DVD status.
9) PLAY BUTTON: Use to begin the DVD playback.
10) PAUSE BUTTON: Use to pause the DVD playback.
11) PREV: Use to skip to the previous chapter.
12) NEXT: Use to skip to the next chapter.
13) EJECT BUTTON: Use to eject the disc being played in the disc slot.
REAR VIEW
AUDIO
R
1) AV OUT (Composite Video and Audio
Out)
L
1
AV OUT
VIDEO
L
AUDIO
R
2 2) AV1 IN (S-Video and Audio In)
S-VIDEO
AV1 IN
3) AV2 IN ( Composite Video and Audio In)
L
AUDIO
R
VIDEO
AV2 IN
4) AV3 IN (Component Video(Y、PB/CB、
PR/CR) and Audio In)
3
4
CR
/
PR
L
AUDIO
R
C
B
/
PB
5) Antenna In
Y
6) AUDIO (VGA/DVI Input)
7) OPTICAL (DVD Output)
8) VGA INPUT
AV3 IN
DVI
VGA
PC INPUT
PC INPUT
DC
24V 6A
OPTICAL
AUDIO
DC INPUT
DVD OUTPUT
DVI/VGA INPUT
9) DVI (Digital Video Input)
10) DC INPUT
5
10
9
8
7 6
page8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
AUDIO
R
L
2g
AV OUT
VIDEO
L
AUDIO
R
S-VIDEO
AV1 IN
L
AUDIO
R
VIDEO
AV2 IN
CR
/
PR
L
AUDIO
R
C
B
/
PB
Y
AV3 IN
DVI
VGA
PC INPUT
PC INPUT
DC
24V 6A
OPTICAL
AUDIO
DVI/VGA INPUT
DC INPUT
DVD OUTPUT
2f
1. CONNECT TO POWER
d. Using the AV3 Component input: The AV3
input may be used for Progressive scan or
HDTV inputs; use the TV/DVD/AUX/PC
a. Connect the mini plug of the AC power
adapter to DC IN jack on the back of the
26MD255V.
button and the
/
buttons to set the
26MD255V’s signal source to "AV3-Component".
e. Using the VGA connector: Connect a PC
computer to the 26MD255V through the VGA
socket on 26MD255V. The Mini-plugged next
to the VGA input is for audio associated with
this type of signal. Use the TV/DVD/AUX/PC
b. Connect the power plug of the AC power
adapter to the power socket.
2. SYSTEM CONNECTIONS
a. Using the antenna input: Connect the
antenna terminal from an antenna or cable
/satellite receiver to the antenna input
terminal on the 26MD255V; use the
button and the
/
buttons to set the
26MD255V s signal source to
PC-Analog(VGA) .
26MD255V monitor s native resolution for
computer use is 1280x768.
TV/DVD/AUX/PC button and the
/
buttons to set the 26MD255V’s signal source
to "TV".
b. Using the AV2 RCA Video/Audio input:
Connect compatible AV equipment to the
26MD255V through the AV2 IN jacks on
26MD255V (Composite Video and Audio
input jacks); use the TV/DVD/AUX/PC
f. Using the DVI connector: Connect a PC
computer to the 26MD255V through the DVI
socket on 26MD255V. The Mini-plugged is for
audio associated with this type of signal.
Use the TV/DVD/AUX/PC button and the
/
buttons to set the 26MD255V s signal source
to PC-Digital(DVI) .
button and the
/
buttons to set the
26MD255V’s signal source to "AV2-Video".
c. Using the AV1 S-Video and RCA Audio
input: Connect AV equipment to the
26MD255V through the AV1 IN jacks on
26MD255V (S-Video and Audio input jacks);
use the TV/DVD/AUX/PC button and the /
buttons to set the 26MD255V s signal
source to AV1-S-Video .
g. Using the AV out, RCA Video/Audio
output: Connect the 26MD255V to another
TV Monitor through the AV OUT jacks on
26MD255V (Composite Video and Audio
output jacks); now you can use the TV
Monitor as an external monitor. Signals from
the Antenna, AV1, AV2 and Internal DVD
player will be available at this point.
page9
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
TURNING OFF THE POWER
POWER
TV/DVD/AUX/PC
1. Press POWER on the remote control, the
image on the screen disappears and the
STANDBY indicator lights up red.
NOTE: Small amounts of electric power is still
consumed even when the power is
turned off.
T V / D V D /
A U X / P C
VOL
VOL
CH
CH
TV/AV MODE SELECTION
By pressing the TV/DVD/AUX/PC on the TV
set and confirming by the OK button, you can
change the mode as follows:
TV
DVD
AV1-S-Video
AV2-Video
POWER
AV3-Component
PC-Digital(DVI)
PC-Analog(VGA)
TV/DVD/
AUX/PC
TURNING ON THE POWER
1. Press POWER button on the front panel to
turn on the TV set. The POWER indicator
lights up green.
2. If the STANDBY indicator still lights up red,
press POWER on the remote control to turn
the TV set on.
page10
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV
TURNING ON THE POWER
1. Press POWER button on the front panel to
turn on the TV set. The POWER indicator
lights up green.
2. If the STANDBY indicator still lights up red,
press POWER on the remote control to turn
the TV set on.
CH+/-
TURNING OFF THE POWER
1. Press POWER on the remote control, the
image on the screen disappears and the
STANDBY indicator lights up red.
NOTE: Weak electric power is still consumed
even when the power is turned off.
SIMPLE BUTTON OPERATIONS
FOR CHANGING CHANNELS
1. Press CH+ to increase channel number.
2. Press CH- to decrease channel number.
NOTE: CH+/- on the TV set operates the
same as CH+/- on the remote unit.
You can change channels in several ways.
Using CH+/- on the remote unit
CH+/-
T V / D V D /
A U X / P C
VOL
VOL
CH
CH
page11
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV
Using number buttons on the remote unit
SIMPLE BUTTON OPERATION
FOR CHANGING VOLUME/SOUND
Changing the volume
You can change the volume on the front panel
or on the remote control unit.
NUMBER
BUTTONS
Select the channels directly by pressing the
number buttons.
VOLUME+/-
EXAMPLE:
To select a 1-digit channel (e.g. channel 2):
●
Press 2 .
To select a 2-digit channel (e.g. channel 12):
●
Press 1 ,followed by 2 .
1. Press VOL+ to increase the volume.
2. Press VOL- to decrease the volume.
USING LAST ON THE REMOTE
UNIT
Using MUTE on the remote control
Press MUTE to mute the current sound
output.
LAST
MUTE
1. Press MUTE . ’’
’’ will display on the
Press LAST to switch the currently tuned
channel to the previous tuned channel.
Press LAST again to switch back to the
currently tuned channel.
screen.
2. Press MUTE again to cancel the mute.
page12
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
Automatic channel search
TV TUNER ADJUSTMENT
Channel auto search finds and memorizes all
channels viewable in your area.
1. Press TV MENU to bring up the TV menu
screen.
Press TV MENU to bring up the TV menu
screen.
2. Press
/
to select "Settings" and press
Press
/
to select "Settings" and press to
to select "TV Tuner".
3. Press to enter "TV Tuner" menu.
4. Press
5. Press to begin the searching. Wait until
the searching ends.
NOTE: The illustrations and on-screen displays
in this manual are for explanation
purposes and may vary from the actual
operations.
enter into the items below ’’Settings’’.
NOTE: Only when in TV status, there is "TV
Tuner"option below "Settings".
/
to select "Auto Search".
Make sure press TV MENU to exit TV
menu screen before other operatings.
Auto Fine Tune
1. Press TV MENU to bring up the TV menu
screen.
2. Press
/
to select "Settings" and press
to select "TV Tuner".
3. Press to enter "TV Tuner" menu.
4. Press
5. Press
/
/
to select "Auto Fine Tune".
to select between on and off ;
press OK to return; press TV MENU to
exit.
Fine tune
Cable
1. Press TV MENU to bring up the TV menu
1. Press TV MENU to bring up the TV menu
screen.
2. Press
screen.
/
to select "Settings" and press
2. Press
/
to select "Settings" and press
to select "TV Tuner".
3. Press to enter "TV Tuner" menu.
to select "TV Tuner".
4. Press
5. Press to enter "Fine Tune" screen.
6. Press to tune for a better picture and
/
to select "Fine Tune".
3. Press to enter "TV Tuner" menu.
/
sound; press OK to return; press TV MENU
to exit.
setting
Channel skip
on
1. Press TV MENU to bring up the TV menu
screen.
0
2. Press
/
to select "Settings" and press
to select "TV Tuner".
down for TV channel settings
3. Press to enter "TV Tuner" menu.
4. Press
5. Press
/
/
to select "Skip".
to select between "Skip" and
4. Press
5. Press
/
/
to select "Cable".
to change cable on and off;
"Add"; press OK to return; press TV MENU
to exit.
press OK to return; press TV MENU to
exit.
page13
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
CONTENT BLOCKING
Password
7. Press to select "Change" and press to
change the password.
1. Press TV MENU to bring up the TV menu
8. Press
/
to select digit and press
/
to
screen.
change the selected digit.
2. Press
/
to select "Settings" and press
9. Press to select "OK" and press OK to
confirm your change.
to select "Content Blocking".
3. Press to enter "Content Blocking
(Password)" menu.
10. Press to select "Clear" and press
to
clear the password; press OK to return;
press TV MENU to exit.
NOTE:The preset password is 071100.
_
Enter 071100 , there will be
Password
ERROR displayed on the screen.
_
Enter 071100 again, the menu for
0 0 0 0 0
0 0 0 0 0
0
0
changing password appears.
4. Press to select "Enter" and press to
enter the password.
5. Press
/
to select digit and press
/
to change the selected digit.
6. Press to select "OK" and press OK to
check the password. Then there will be
"Change" and "Clear" under "Enter".
page14
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
PICTURE ADJUSTMENT
AUDIO ADJUSTMENT
Press TV MENU to bring up the TV menu
Press TV MENU to bring up the TV menu
screen.
screen.
Press
/
to select ’’Audio’’ and press to
Press
/
to select ’’Picture’’ and press to
enter into below items.
enter into below items.
16
16
16
9
16
16
0
5
equalizer
Brightness
1. Press TV MENU to bring up the TV menu
screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Brightness’’.
to adjust the picture brightness;
Volume
1. Press TV MENU to bring up the TV menu
press OK to return; press TV MENU to
exit.
Contrast
screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Volume’’.
to adjust the volume; press OK
1. Press TV MENU to bring up the TV menu
screen.
to return; press TV MENU to exit.
Bass
1. Press TV MENU to bring up the TV menu
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Contrast’’.
to adjust the picture contrast;
press OK to return; press TV MENU to
exit.
Color
screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Bass’’.
to adjust the bass weaker or
1. Press TV MENU to bring up the TV menu
screen.
stronger; press OK to return; press
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Color’’.
to adjust the picture color; press
TV MENU to exit.
Treble
To stress high frequency sound
1. Press TV MENU to bring up the TV menu
screen.
OK to return; press TV MENU to exit.
Sharpness
1. Press TV MENU to bring up the TV menu
screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Treble’’.
to adjust the treble weaker or
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Sharpness’’.
to adjust the picture sharpness;
stronger; press OK to return; press
TV MENU to exit.
press OK to return; press TV MENU to
exit.
NOTE: In DVD status, there is no "Sharpness";
there is "Phase".
page15
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
WINDOW ADJUSTMENT
AUDIO ADJUSTMENT
(CONTINUED)
PC mode input format
Balance
Resolution
Freq. (Hz)
1. Press TV MENU to bring up the TV menu
screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Balance’’.
to adjust audio output between
60
72
75
640×480
640×480
640×480
VGA
left and right speakers; press OK to return;
press TV MENU to exit.
MPX
This function is to select a MPX mode.
1. Press TV MENU to bring up the TV menu
screen.
60
75
72
800×600
800×600
800×600
SVGA
XGA
60
70
75
1024×768
1024×768
1024×768
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’MPX’’.
to select a MPX mode; press
WXGA
SXGA
60
60
1280×768
OK to return; press TV MENU to exit.
NOTE: 1. You can also use the MPX button
on the remote control to select a
MPX mode.
1280×1024
In case of inputting the PC signal other than
above signals, ’’OUT OF RANGE’’ will display.
2. Only when in TV status, there is
MPX option.
Equalizer
Press TV MENU to bring up the TV menu
screen.
Press
1. Press
menu.
/
to select "Equalizer" in "Audio"
/
to select ’’Window’’ and press
to
enter into below items.
2. Press to enter "Equalizer" menu to adjust.
Equalizer
display mode
16
16
Change equalizer character
3. Press OK to exit and return to "Audio"
menu.
4. Press TV MENU to exit.
page16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
OPTIONS ADJUSTMENT
WINDOW ADJUSTMENT
(CONTINUED)
Press TV MENU to bring up the TV menu
screen.
Display Mode
Press
/
to select ’’Options’’ and press to
1. Press TV MENU to bring up the TV menu
screen.
enter into below items.
2. Press
3. Press
4. Press
/
/
/
to select ’’Window’’.
to move to ’’Display Mode’’.
to select a Display mode; press
OK to return; press TV MENU to exit.
H-Position
English
Normal
Language
1. Press TV MENU to bring up the TV menu
screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Window’’.
to move to ’’H-Position’’.
to adjust the horizontal position
Color Temperature
of displayed image; press OK to return;
press TV MENU to exit.
V-Position
Language
It is used to set the menu language between :
English, French and Spanish.
1. Press TV MENU to bring up the TV menu
screen.
1. Press
menu.
2. Press
/
to select "Language " in "Option"
2. Press
3. Press
4. Press
/
/
/
to select ’’Window’’.
to move to ’’V-Position’’.
to adjust the vertical position of
/
to adjust the language between :
English, French and Spanish.
3. Press TV MENU to exit.
displayed image; press OK to return; press
TV MENU to exit.
NOTE: In TV, VIDEO, S-VIDEO and
COMPONENT Status, there is only
Display Mode option.
Freeze
It is used to freeze the image.
1. Press
menu.
/
to select "Freeze" in "Options"
2. Press
/
to select ON or OFF in
Freeze .
●
●
ON: Freeze the image being played.
OFF: Turn off Freeze , the image continue
playing.
3. Press TV MENU to exit.
page17
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
OPTIONS ADJUSTMENT
(CONTINUED)
Sleep Time
Picture Settings Reset
It is used to auto shift the time of standby status
and the time remaining will be displayed .
1. Press TV MENU to bring up the TV menu
screen.
2. Press
3. Press
Reset’’.
/
/
to select ’’Options’’.
to move to ’’Picture Settings
1. Press
/
to select "Sleep Time "in
"Options" menu.
2. Press / to adjust the time of "Sleep Time" :
4. Press to reset all settings to factory
setting.
10min 20min 30min 60min 90min
CC Mode
1. Press
menu.
/
/
to select "CC Mode " in "Option"
to select a CC Mode.
0 min
240min
180min
120min
2. Press
3. When you have set the "Sleep Time " , the
count down will be applied automatically ,
and the time remaining displays the remain
time .
3. Press TV MENU to exit.
Color Temperature
It is used to adjust the Color Temperature.
If you set the "Sleep Time " at "10 minutes
…… or 240 minutes " , "Time Remaining "
displays :
1. Press
/
to select "Color Temperature " in
"Option" menu.
2. Press
/
to adjust the color temperature
between: Normal, Warm and Cool.
3. Press TV MENU to exit.
NOTE: In DVD, PC status, there is no
Freeze , CC Mode option.
In AV3-COMPONENT status, there is
no CC Mode option.
Sleep Time
120minutes
Time remaining
120
minutes
4. If you want to cancel the " Sleep Time " , you
can set the " Sleep Time " on " 0 minutes" .
5. Press TV MENU to exit.
page18
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (FOR DVD PLAYER)
DVD
CD
DVD
、
CD
Pause
、
Play Discs
Press
1. Press POWER to turn on the unit.
2. Press the TV/DVD/AUX/PC
button on the remote control to
bring up the AV signal source
selection screen and use the
PAUSE
/
buttons to select "DVD", press the
OK button to confirm.
3. Insert a disc into the disc slot,
with the label side facing to
yourself.
DVD
●
To pause playback of a DVD while it is
4. The unit begins to read the disc.
playing, press
.The unit enters step play
5. Press
(PLAY) to play the disc.
status. Each time you press
picture advances one frame.
, the
AFTER STEP 4 IS FINISHED:
●
If playing a DVD, the TV screen shows DVD
CD
menu or title menu.
●
If playing a CD, press
(PLAY), and the unit
●
Press
to make playback pause.
plays the disc according to the track
numbers.
Press (PLAY)to resume playback.
5. Stop playback.
Press ■ .
DVD
CD
、
OSD
OSD
6. Press the button on the remote control to
remove the disc and turn off the unit.
●
You have to push "■" button twice to stop
playback of a DVD disc.
The On-Screen Display (OSD) contains many
playback features.To see the Display, press the
OSD button on the remote while a disc is
playing. The picture being played will be
zoomed out to the top of the screen. The
Display appears under the zoomed picture.
Use the or
buttons on the remote to move
through the different playback features in the
Display.
When a playback feature is highlighted, press
the (PLAY) button and the text box by the right
side of it will be highlight.Use the or buttons
on the remote to move through the choices
displayed in the text box.
page19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (FOR DVD PLAYER)
Remember, you can only access the Display
when you’re playing a disc. Also, the Display
features are only available if the disc was
created with that particular feature.
3. Press the (PLAY) button, the text box by
the right side is now highlighted.
4. Use the number buttons on the remote to
enter a chapter number that you want to
play.
The invalid symbol " " appears on the screen
when you press a button that doesn’t have any
function. If one of the playback features is
"grayed out ",that Display feature isn’t available
for the disc you’re playing.
Notes: The chapter feature won’t work if the
disc isn’t formatted with separate
chapters. You can also advance to the
next chapter by pressing
on the
To make the Display disappear from the
screen, press OSD on the remote.
remote and go to the preceding
chapter by pressing
on the remote.
■ Changing the Audio Language
If the disc was created with different language
tracks (recorded in different languages), you
can use the Display to temporarily change the
DVD player’s Audio Language setting.
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the or buttons to highlight the
Audio icon.
WHEN PLAYING DVD
DVD discs have the following playback
features:Title, Chapter, Audio, Subtitle, Angle,
TT (Title) Time, CH (Chapter) Time, Repeat
and Time Display.
■ Select a Title
Some discs contain more than one title. Each
title is divided into chapters. To select a title:
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. If the Title icon on the Display isn’t
3. Press the (PLAY) button, the audio
languages appear on the screen.
4. Press the or buttons to move through
the audio languages that are available on
the disc.Press the (PLAY) button when the
audio language you want to use is highlighted.
5. To make the Display disappear, press the
OSD button on the remote.
highlighted, use the
highlight it.
or buttons to
3. Press the (PLAY) button, the text box by
the right side is now highlighted.
4. Use the number buttons on the remote to
enter a title number that you want to play.
Note: Some discs only have one title.
■ Select a Chapter
Note: The language feature only works if the
disc was created with multiple audio tracks.
When you choose an audio language from the
Display, you only override the audio language
setting in the DVD player’s main menu
temporarily.
Because DVD discs use digital technology, a
title can be divided into chapters (similar to
tracks on a CD). You can skip to a specific
chapter by using the Chapter feature in the
Display.
The audio language can also the changed
through the DVD player menu.
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the or buttons to highlight the
Chapter icon.
■ Selecting the Subtitle Language
If the disc was created with subtitles, you can
use the Display to change the Subtitle
language.
page20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (FOR DVD PLAYER)
1. While the disc is playing, press OSD on
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the or buttons to highlight "TT
(Tile) Time" .
the remote to bring up the Display.
2. Press the
"Subtitle".
or buttons to highlight the
3. Press the (PLAY) button, the text box by
the right side is now highlighted.
3. Press the (PLAY) button, the subtitle
languages appear.
4. Use the number buttons to enter an angle
number that you want to play.
4. Press the
or buttons to move through
the subtitle languages that are available on
the disc.Press the (PLAY) button when the
subtitle language you want to use is highlighted.
5. To make the Display disappear, press the
OSD button on the remote.
■ Setting Chapter Time
You can skip to a specific chapter time by using
the Chapter Time feature in the Display.
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the or buttons to highlight "CH
(Chapter) Time" .
Notes: Changing the subtitle language with the
Display will only affect the disc currently being
played. When the disc is removed or the player
is turned off, the subtitle language will revert to
the language setting specified through the DVD
player main menu.
3. Press the (PLAY) button, the text box by
the right side is now highlighted.
4. Use the number buttons to enter an angle
number that you want to play.
■ Using the Repeat Feature
The subtitle language can also be changed
through the DVD player menu.
The default mode for the Repeat feature is off.
There are three Repeat options:
●
■ Changing the Camera Angle
All - repeats the disc that is playing
Some discs contain multiple angles of a
particular scene or sequence. When multiple
angles are available, to change the camera
angle:
●
Title - repeats the title that is playing
●
Chapter - repeats the chapter that is playing
To Use Repeat:
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the or buttons to highlight
"Repeat".
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the or buttons to highlight "Angle".
3. Press the (PLAY) button, the text box by
the right side is now highlighted.
3. Press the (PLAY) button, the repeat
options appear.
4. Press the or buttons to move through
the repeat options. Press the (PLAY)
button when the repeat option you want to
use is highlighted.
4. Use the number buttons to enter an angle
number that you want to play.
5. To make the Display disappear, press the
OSD button on the remote.
5. The selected repeat option will loop
repeatedly until you turn Repeat off.
■ Setting Title Time
You can skip to a specific title time by using the
Title Time feature in the Display.
page21
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (FOR DVD PLAYER)
How to Cancel Repeat:
■ Setting Track Time
There are three ways to cancel Repeat:
You can skipo to a specific track time by using the
Track
●
Press STOP twice.
●
Go to Repeat icon in the Display and select
Time feature in the Display.
Off.
1. While the disc is playing, press OSD on
the remote to bring up the Display.
●
Eject the disc.
■ Shifting the Displayed Time
Using the Time Display feature in the Display,
you can shift the time displayed on the screen,
between: Title Elapsed Time, Title Remain Time,
Chapter Elapsed Time, and Chapter Remain
Time.
1. While the disc is playing, press OSD on
the remote to bring upo the Display.
2. Press the or buttons to highlight "Time
Disp".
2. Press the
"Track Time" , while a disc is playing.
3. Press the (PLAY) button, the text box by
or
buttons to highlight
the right side is now highlighted.
4. Use the number buttons on the remote to
enter a track time that you want to play.
■ Using the Repeat Feature
The default mode for the Repeat feature is off.
3. Press the
appear.
(PLAY) button, the time options
There are two Repeat options for CDs:
●
All - repeats the disc that is playing
4. Press the or buttons to move through the
time options. Press the (PLAY) button when
the option you want to use is highlighted.
5. To make the Display disappear, press the
OSD button on the remote.
●
Track - repeats the track that is playing
To use Repeat:
1. While the disc is playing, press OSD on
the remote to bring up the Display.
2. Press the
"Repeat" , while a disc is playing.
3. Press the (PLAY) button, the repeat
options appears.
4. Press the or
the repeat options. Press the
or
buttons to highlight
WHEN PLAYING CD
CD discs have the following playback features:
Track, Disc Time, Track Time, Repeat and
Time Display.
■ Select a Specific Track
1. While the disc is playing, press OSD on
the remote to bring up the Display.
buttons to move through
(PLAY)
button when the repeat option you want to
use is highlighted.
2. Press the
3. Press the
or buttons to highlight "Track" .
(PLAY) button, the text box by
5. The selected repeat option will loop
repeatedly until you turn Repeat off.
■ Shifting the Displayed Time
the right side is now highlighted.
4. Use the number buttons on the remote to
enter a track nunber that you want to play.
■ Setting Disc Time
You can skip to a specific disc time by using
the Disc
Time feature in the Display.
1. While the disc is playing, press OSD on
the remote to bring up the Display.
Using the Time Display feature in the Display,
you can shift the time displayed on the screen,
between: Single (Track) Elapsed Time, Single
(Track) Remain Time, Total (Disc) Elapsed
Time, and Total (Disc) Remain Time.
2. Press the
or
buttons to highlight
"Disc Time", while a disc is playing.
3. Press the
(PLAY) button, the text box by
the right side is now highlighted.
4. Use the number buttons on the remote to
enter a disc time that you want to play.
page22
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS (FOR DVD PLAYER)
1. While the disc is playing, press OSD on
DVD
DVD Menu Play
the remote to bring up the Display.
2. Press the
or
buttons to highlight "Time
Disp" in the Display while a disc is playing.
Some DVDs have title menus and chapter
menus.
3. Press the
appears.
(PLAY) button, the time options
or buttons to move through
Press (PLAY), the screen shows the menu.
4. Press the
the time options.Press the (PLAY) button
when the option you want to use is highlighted.
Press
or
to skip to the next or
previous page. Select with number buttons or
5. To make the Display disappear, press the
direction buttons.
OSD button on the remote.
1.
Root
Menu
2.
Volume Control
DVD
CD
、
11.
Example: select track 13.
●
Press VOLUME on the TV or amplifier to
adjust the volume.
1. Press
to enter the next menu.
●
Press VOLUME on the remote control.
12.
Root
Menu
13.
14.
15.
2. Press number buttons to select directly.
VOLUME+,-
+
3
+10
You can also select as follows:
1. Press to select track 13.
1. Press + to raise the volume.
12.
Root
Menu
13.
14.
15.
2. Press - to lower the volume.
2. Press (PLAY) to start playing track 13.
Press DVD TITLE once to return to the title
menu.
Press DVD MENU once to return to the root
menu; press it again to resume to play.
page23
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
PLAY DISCS IN VARIOUS WAYS
Select with Number
DVD
CD
、
Audio Mode
●
You may select a language from a multi-
language DVD.
You may select the right channel, left
channel, or stereooptions from a multi-
channel CD.
Buttons
CD
●
Load a disc. Press number buttons to select
tracks after the unit finishes reading the disc.
1. If the track number isn’t over 10, just
push buttons 1-10.
Example: push 8 to select track 8.
A.MODE
AUDIO
DVD
8
●
To select a language, press AUDIO .
The screen will show the following in order:
The screen shows:
AUDIO 1/2:AC-3 5.1CH
TRACK08/20 00:00
AUDIO 2/2:AC-3 5.1CH
2. If the track number is over 10, press + 10
once and a button between 1-10.
Example: if you select track 12, press +10
once and button 2 .
Different discs may differ in languages available.
To select audio channel option, press A.MODE,
●
the screen shows the following in order:
A.MODE
+
2
MONO LEFT
+10
A.MODE
MONO RIGHT
The screen shows:
A.MODE
TRACK12/20 00:00
MIXED MONO
A.MODE
STEREO
page24
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
CD
DVD
CD
Fast Play
、
To select audio channel option when for CD
playback, press A.MODE . The screen will
show the following in order:
When playing a disc, you can play it in fast-
forward or fast-reverse mode to find what you
want to view.
A.MODE
MONO LEFT
DVD OR CD
1. While disc is playing, press
to play in
A.MODE
fast-forward mode. Each time you press the
button, the screen shows the following in
order:
MONO RIGHT
①
②
③
④
⑤
⑥
2X
4X
8X
16X
32X
A.MODE
FF
MIXED MONO
A.MODE
STEREO
2. While disc is playing, press
to play in
You may select one mode.
Notes:
●
fast-reverse mode. Each time you press the
button, the screen shows the following in
order:
Different discs differ in languages available.
①
②
③
④
⑤
⑥
2X
4X
8X
16X
32X
DVD
CD
、
FR
Mute
When playing a disc, this function removes the
sound.
1. TO REMOVE SOUND
Press MUTE , the screen shows "
".
3. Press
(PLAY) to switch to normal play
while in fast-forward or fast-reverse playing
mode.
MUTE
2. TO RESUME SOUND
Press MUTE again, to resume sound.
page25
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
DVD
Playing A Disc
Slow Play
Enjoy slow motion by the following the steps
Repeatedly
below.
DVD
SLOW
You can repeat a title or chapter.
1. To repeat a chapter:
DVD
Press REPEAT , the screen will show:
1. Press SLOW to play in slow motion.
REPEAT
CHAPTER
SLOW
2. To repeat a title:
Press REPEAT twice, the screen will show:
The screen shows the following in order:
REPEAT
1/2
1/4
1/8
1/4
1/16
1/2
TITLE
1/16
1/8
2. Press
speed.
(PLAY) to resume play at normal
3. To repeat all:
Press REPEAT third time, the screen
DVD
CD
shows "
ALL".
、
Repeat Play
4. To remove "REPEAT" function:
This function can be used to repeatedly play a
Press REPEAT until "
ALL"
title, chapter, track, or a whole disc.
disappears.
CD
●
You may repeat a track or an entire disc
according to the following steps.
1. To repeat a track:
Press REPEAT , the screen shows
REPEAT
"
TRACK".
The unit plays the current track.
page26
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
REPEAT
Select Subtitles
TRACK
DVD
This operation works only with discs with
multiple subtitle languages recorded.
2. To repeat a disc:
Press REPEAT , the screen shows
ALL".
"
The unit plays all the tracks on the disc.
REPEAT
ALL
3. To remove "REPEAT" function:
SUBTITLE
Press REPEAT till "
ALL" disappears.
DVD
Zoom Play
This function can be used to watch a
motion or motionless picture.
DVD
1. Press SUBTITLE repeatedly until the
desired language is selected.
The screen shows:
ZOOM
1. Press ZOOM during playback,
SUBTITLE
the screen shows:
SUBTITLE01/03:ENGLISH
2X
The picture is enlarged twice the size.
2. Press ZOOM again, the screen shows:
2. Remove the subtitle.
Press SUBTITLE until the screen shows
"SUBTITLE OFF".
3X
Notes:
●
The picture is enlarged three times the size.
Note: The unit has six zoom levels:
2X, 3X, 4X, 1/2 , 1/3 , and 1/4 .
For some discs, subtitles cannot be
removed.
●
Different discs differ in the language of
3. Press
picture.
,
,
,
to move the enlarged
subtitles.
●
If the subtitles of discs cannot be selected,
4. To resume the picture, press ZOOM until
the picture is in normal size.
the screen shows "
" when you press
SUBTITLE .
page27
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
DVD
CD
DVD
Angles Select
Program Play
Some discs have images with different viewing
angles, you may select among them. For
example, when you watch a running train, you
may watch it from the front, the left window or
the right window without stopping it.
P.MODE
To use the program playback feature, you must
enter the order in which you want the titles (and
chapters) on the DVD or the tracks on the CD
to play by creating a program.
DVD
1. Press P.MODE until the screen shows:
PROGRAM: TT(20)/CH (
--)
ANGLE
01 TT:_ _ CH:_ _ 06 TT:_ _ CH:_ _
02 TT:_ _ CH:_ _ 07 TT:_ _ CH:_ _
03 TT:_ _ CH:_ _ 08 TT:_ _ CH:_ _
04 TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _
05 TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _
Example:
EXIT
NEXT
A DVD has four viewing angles at your option.
1. Press ANGLE to select ANGLE1.
2. Use the number buttons on the remote to
enter the title (and chapter) you want to play
first. The title (and chapter) number you
entered appears in the box. For example: Enter
Chapter 1 in Title 8, the screen shows:
1/4
PROGRAM: TT(20)/CH (
--)
01 TT:0 8 CH:0 1 06 TT:_ _ CH:_ _
02 TT:_ _ CH:_ _ 07 TT:_ _ CH:_ _
03 TT:_ _ CH:_ _ 08 TT:_ _ CH:_ _
04 TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _
05 TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _
2. Press ANGLE to select other angles, the
EXIT
START
NEXT
screen shows respectively:
3. The cursor jumps to the next spot in the
program list section. Make sure the box is
highlighted and enter your next track.
4.Continue adding title (and chapter) until your
program is complete. You can play your
program by highlighting START and press
PLAY .
2/4 (select ANGLE2)
3/4 (select ANGLE3)
4/4 (select ANGLE4)
Note: If you want to program more than 10
titles (and chapters), highlight NEXT
and press PLAY to go to the next
page. Proceed to program 11-20 in the
same way titles 1-10 were
3. To resume normal playback, press ANGLE
to select original angle.
programmed.
5. To remove program playback, press the
STOP button twice during the program play.
page28
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
CD
Shuffle (Random)
Play
1. Press P.MODE until the screen shows:
DVD
CD
PROGRAM: TRACK (01-20)
01 _ _
02 _ _
03 _ _
04 _ _
05 _ _
06 _ _
07 _ _
08 _ _
09 _ _
10 _ _
The unit can play DVD chapters or audio
tracks in random order.
The order is different each time.
EXIT
NEXT
1. Press P.MODE to select shuffle or
2. Use the number buttons on the remote to
enter the track number you want to play
first. The track number entered appears in
the box. The example: To program track 8
of a CD to play first, enter 8, and the screen
shows:
random play mode when a disc is playing.
P.MODE
The screen shows:
PROGRAM: TRACK (01-20)
01 08
02 _ _
03 _ _
04 _ _
05 _ _
06 _ _
07 _ _
08 _ _
09 _ _
10 _ _
SHUFFLE
OR
RANDOM
EXIT
START
NEXT
2. Shuffle or random play will begin.
3. Remove shuffle or random play.
3. The cursor jumps to the next spot in the
program list section. Make sure the box is
highlighted and enter your next track.
4. Continue adding tracks until your program
is complete. You can play your program by
highlighting START and press PLAY .
Note: If you want to program more than 10
tracks, highlight NEXT and press
●
When playing a DVD disc, press ■ twice.
●
When playing a CD disc, press ■ twice.
PLAY to go to next page. Program 11-
20 in the same way 1-10 were
programmed.
5. To remove program playback, press the
STOP button during the program play.
page29
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
According to the recorded information and
external equipment, set the following functions
for the player to obtain the best playing
status.
The screen shows:
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Equalizer
SETUP
3D Processing
Main Page
Go To Speaker Setup Page
1.Press SETUP to set options in the main menu.
●
Press direction buttons ( or ) to highlight
"Dolby Digital Setup", and press (PLAY) to
enter "Dolby Digital Setup" Page. The screen
shows the submenu for your selection.
SETUP
The screen shows:
The main menu appears on the screen, with
icons across the top of the screen, illustrating
General Setup, Audio Setup, Preference
Setup, Password Setup, and Exit Setup.
The screen shows:
--Dolby Digital Setup--
Dual Mono STR
Stereo
L-Mono
R-Mono
Mix-Mono
Dynamic
--Setup Menu--Main page --
General Setup
Audio Setup
Audio Setup
●
Press direction buttons
,
to select "L-
Preference Setup
Password Setup
Exit Setup
Mono".
The screen shows:
Go To General Setup Page
--Dolby Digital Setup--
Dual Mono STR
Stereo
2. Press direction buttons ( or ) to select
L-Mono
R-Mono
Mix-Mono
and press
(PLAY) to confirm.
Example: Select "Audio Setup" and do some
setup.
Dynamic
●
Press direction button
to highlight "Audio
Audio Setup
Setup", press
Setup Page".
(PLAY) to enter "Audio
page30
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
●
Press
(PLAY) to confirm your selection.
-- General Setup Page --
Set "Dual Mono" in "Dolby Digital Setup" to
"L-Mono".
The sereen shows:
TV Display
Wide
ENG
On
Normal/PS
Normal/LB
Wide
OSD Lang
Captions
English
Fran ais
Espa ol
On
--Dolby Digital Setup--
Dual Mono
L
Stereo
L-Mono
R-Mono
Mix-Mono
Off
Dynamic
Screen Saver On
Main Page
On
Audio Setup
Off
3. Exit setup menu.
Press the direction button
"Dual Mono".
Press the direction button
"Dolby Digital Setup".
Press the direction button to highlight
●
to exit from
to exit from
■ TV DISPLAY
1. NORMAL/PS
●
●
This is selected when the unit is connected
to a normal TV.
Wide-screen images are shown on the
screen, but with some parts cut automatically.
"Main Page" and press
screen shows:
(PLAY). The
Setup Page -- Main Page
General Setup
2. NORMAL/LB
Audio Setup
This is selected when the unit is connected
to a normal TV. Wide-screen images are
shown on the screen with black bars on the
top and bottom of the screen.
Preference Setup
Password Setup
Exit Setup
Go To Audio setup Page
●
Press the direction button to highlight "Exit
Setup" and press (PLAY) to exit setup
menu completely.
3. WIDE
NOTE:You can also keep pressing the
direction button until the cursor is
moved to the last icon illustrating
Exit, then press the (PLAY) button to
exit setup menu completely.
This is selected when the unit is
connected to a wide-screen TV.
General Setup
The setting structure is :
NOTE: You can use the WIDE button on the
remote control to set TV display mode.
page31
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
●
Lt/Rt
■ OSD LANGUAGE
●
A disc recorded multi channel soundtrack, the
output signal will be incorported to left and right
channel.
ENGLISH
The OSD is in English.
●
FRENCH
●
STEREO
The OSD is in French.
A disc recorded multi channel soundtrack, the
output signal will be incorported to stereo.
●
SPANISH
The OSD is in Spanish.
■ DOLBY DIGITAL SETUP
■ CAPTIONS
●
The setting structure is:
ON
- - Dolby Digital Setup - -
Subtitles are shown.
●
OFF
Dual Mono STR
Stereo
L-Mono
R-Mono
Mix-Mono
Subtitles are hidden.
■ SCREEN SAVER
FULL
3/4
Dynamic
2/4
The screen saver image appears when the unit
stops or the image is frozen for a few minutes. The
screen saver prevents damage to the TV screen.
1/4
Audio Setup
OFF
●
DUAL MONO
●
ON: Start the screen saver.
This is the output mode of the L and R signals
of the set audio output. If it is set to "MIX-
MONO", the function only works when the DVD
being played is 5.1-channel.
●
OFF: Remove the screen saver.
●
Dynamic
This is selected to adjust linear compression
rate to obtain the different compression results
of the signals.
Audio Setup
The setting structure is:
■ EQUALIZER
This will help you to select graphic equalizer
patterns according to the genre of the music
being played,and adjust the equalizer.
- - Audio Setup Page - -
Speaker Setup
Dolby Digital Setup
Equalizer
The setting structure is:
3D Processing
Main Page
- - Equalizer Page - -
EQ Type
None
None
Rock
Pop
■ SPEAKER SETUP
Live
The setting structure is:
Dance
Techno
Classic
Soft
- - Speaker Setup Page - -
Downmix
STR
Lt/Rt
Stereo
Audio Setup
Audio Setup
●
EQ TYPE
You can select music category by pressing the
direction buttons and confirm by pressing the
PLAY button.
page32
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
■ 3D PROCESSING
Password Setup
The setting structure is :
The setting structure is:
- - 3D Processing Page - -
- - Password Setup Page - -
PW Mode
Off
On
Off
Change
V SURR
Off
Off
On
Off
Off
Concert
Password
Main Page
Reverb Mode
Living Room
Hall
■
●
PASSWORD MODE
ON: The password function is on and
"PARENTAL" is dim and cannot be
Bathroom
Cave
selected.
Arena
●
OFF: The password is locked,
Church
Audio Setup
"PARENTAL" can be selected.
■
PASSWORD CHANGE
Select this to adapt the code, the screen
shows:
●
V SURR
Use to turn the above function off.
●
Old Password
New Password
Confirm PWD
OK
REVERB MODE
Use to select a Reverb Mode which you want.
Enter a password according to the screen.
Note: The password is automatically
factory set to 99999.
page33
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
Preferences
The setting structure is :
■ LANGUAGE SELECTION
If a language mentioned above is recorded on
the disc, you can select sound, subtitles or disc
menu languages. If not, the language recorded
on the disc is shown.
- - Preference Page - -
Audio
ENG
English
French
■ PARENTAL LOCK
Spanish
Chinese
Japanese
When playing a disc with parental lock function,
you may select an age control grade according
to the rating your desire.
Example: If "PG" is selected, you cannot play
DVD video discs rated higher than the PG
grade.
Subtitle
ENG
English
French
Spanish
Chinese
Japanese
Off
■ DEFAULT >> RESET
Each function setting returns to the initial status
in the factory if you select this option.
Note:
●
"PREFERENCES" can only be selected when
password is OFF when the unit is in stop
mode.
Disc Menu
ENG
English
French
Spanish
Chinese
Japanese
Parental
08
1 KID SAFE
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC17
8 ADULT
Default
Reset
Main Page
page34
Download from Www.Somanuals.com. All Manuals Search And Download.
KODAK PICTURE CD PLAYBACK
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by
checking the box on the photofinishing envelope when you drop off a roll of film (35 mm or Advanced Photo
System (APS) color print film) at the time of processing in photo processing outlet displaying "Kodak Picture
CD"sign. When your order is returned, you receive your prints, negatives, and your full roll of pictures safely
stored on your KODAK Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and
manage your pictures on your computer.
Now, you can playback Kodak Picture CDs on XXX DVD players and view your pictures on your TV in the
comfort of your living room.
Playing back your Kodak Picture CD
The new feature enables the decoding of JPEG files from a Kodak Picture CD disk.
Playback modes
Normal
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the
Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the TV
screen. Twelve slideshow transition modes are provided, use "P. MODE" key to select.Select transition
mode prior to start of slideshow if one mode is desired for the entire show.
Mode 8: wipe from right bottom to left top
Mode 0: no special transition effect (by default)
Mode 1: wipe from top to bottom
Mode 2: wipe from bottom to top
Mode 3: wipe from left to right
Mode 9: wipe from center to top/bottom
Mode 10: wipe from center to left/right
Mode 11: wipe from top/bottom to center
Mode 12: wipe from left/right to center
Mode 4: wipe from right to left
Mode 13: horizontal blinds
Mode 14: vertical blind
Mode 5: wipe from left top to right bottom
Mode 6: wipe from right top to left bottom
Mode 7: wipe from left bottom to right top
Mode 15: wipe from edge to center
Mode 16: random
Customer can set transition effects for each picture in a slideshow by using the "P. MODE" functions while
viewing a slideshow.The last transition mode selected will be used in any future slideshows.
To display an image indefinitely, press the PAUSE key. To view the Next or Previous picture press NEXT or
PREVIOUS keys. To resume the slideshow press the PLAY key.
Image Rotation
There are four modes to rotate a picture:"Invert", "Mirror", "Left", and "Right". These operations are allowed
only when a picture is being displayed normally and will be cancelled automatically when a new picture is
displayed.The arrow key is used to select the diferent rotation modes:
Up
-Invert/Normal
-Mirror/Normal
-Turn left
Down
Left
Right
-Turn right
Zoom
We provide both ZOOM in/out and Zoom pan function for the pictures. The "ZOOM" key is used to turn on
or off this function. When this mode is on, any picture will be displayed at the last ratio selected by the user.
A message on the screen will indicate the current Zoom ratio.
If zoom mode is on, "FF" and "FR" keys are used to control the ratio of zoom in/out. With ZOOM mode off, a
picture is scaled to fit the TV screen.
Notes: During ZOOM function, slideshow transition and image rotation are disabled. TO cancel the ZOOM
function, press the ZOOM key again and resume the slideshow.
Digest
The "MENU" or "STOP" key is used to display thumbnail size pictures. After it is enabled, up to 9 scaled-
down thumbnail pictures will be displayed on the screen. The "NEXT" and "PREV" keys can be used to
display the next/prev nine pictures in the the Kodak Picture CD.
You can select any of the nine displayed thumbnails by using the Arrow Keys and pressing the "PLAY" key.
The thumbnail will be enlarged to fit the TV screen and the slide show will statr. If you desire to display an
image indefinitely, press the PAUSE key. To view the Next or Previous picture press NEXT or PREVIOUS
keys. To resume the slideshow press the PLAY key.
IMPORTANT NOTE:
Quality of pictures displayed on the screen is highly dependent on the viewing device.
page35
Download from Www.Somanuals.com. All Manuals Search And Download.
__
TROUBLESHOOTING
WATCHING TV
Please check the following items before asking for repair service.
Symptom
Check Items
●
●
Neither picture nor
sound.
Check the contact of sockets is all right.
Check the TV main power is on.
Picture is OK, but no
sound.
●
Check the volume control is set to minimum or mute.
●
●
Sound is OK, but no
color.
Check the color control and adjust it properly.
Check the programme is in color or in black & white.
●
●
Check the antenna is installed correctly and if not, adjust the antenna
toward the broadcasting station.
Check the ’’FINE TUNE ’’is set up correctly and if not, adjust the fine
tuning properly.
The picture is
overlapped image.
●
●
Check the antenna or its connection is correct and if not, correct the
antenna fault or connection cable fault.
Check if car traffic or neon sign disturbs the sound effect.
Picture has ’’snow
noise ’’.
●
Check the susceptible interference by other electronic devices such
as radio and television and keep magnetic or electronic devices
away from the TV.
Stripes on picture.
●
Bad stereo or SAP
sound.
Long distance from the station or other radio waves can generate
bad sound. Reception. If so, change the mode to Mono.
●
●
Check if the batteries in the Remote control die.
Check if any object between IR sensor of the TV and the Remote
control does not obstruct.
Remote control does
not work.
●
●
Check the resolution and frequency of your PC. Then, adjust them to
optimum condition for LCD TV: 1280X768 and 60Hz.
Refer to the table of PC mode input format indicated on page 15.
(Not being registered resolution and frequency on the table won’t be
displayed.)
’’Out Of Range’’
appears on the
screen.
’’No Signal’’ appears
on the screen.
●
●
●
Ensure that the signal cable is firmly connected to PC and TV.
Adjust the PHASE control. (Refer to the PICTURE ADJUSTMENT.)
Image is not clear in
PC mode.
Image is not
centered.
Adjust the H-POSITION, and IMAGE SIZE Control. (Refer to
the WINDOW ADJUSTMENT.)
page36
Download from Www.Somanuals.com. All Manuals Search And Download.
__
TROUBLESHOOTING
WATCHING DVD
If you experience the following problems while using the unit, this troubleshooting guide can
help you.
●
No sound
Check if the unit is connected securely.
Make sure the TV or amplifier is working properly.
Make sure the amplifier is set to receive DVD
signal output.
●
●
●
●
●
No image
Check if the unit is connected securely.
Make sure the TV is working properly.
Make sure the color system is set correctly.
●
●
Bad sound quality
Disc cannot be played
Make sure the audio output mode is set correctly.
Make sure the audio connection between the
unit and amplifier is in place.
●
●
There is no disc in the unit.
Put the disc on the disc tray properly with the
label side up.
●
●
Clean the disc.
Moisture has condensed in the unit. Remove
the disc and leave the unit on for about an
hour.
●
Disconnect the power plug and insert it into the
wall outlet again.
The unit doesn’t operate
normally
●
●
●
Remove barriers between the remote control
and the unit.
Point the remote control at the remote control
sensor of the unit.
Remote control does not work
Replace the batteries with new ones.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
page37
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
LCD
●
PANEL
26’’ WIDE TFT LCD
1280 X 768 X RGB
370 X 222
●
●
●
RESOLUTION
ACTIVE AREA (mm)
VIEWING ANGLE (°,H/V)
176/176
DIMENSION
●
WITH STAND (mm)
770 X 552 X 210
770 X 443 X 100
●
WITHOUT STAND (mm)
●
WEIGHT (WITHOUT ACCESSORIES)
15.8kg
TV-FUNCTION
●
TV STANDARD
TUNING SYSTEM
FREQUENCY RANGE
STEREO
NTSC
●
ELECTRIC TUNING SYSTEM
VHF/UHF
MTS + SAP
●
●
●
CATV
125 CHANNELS
SOUND
SOUND OUTPUT
●
8W×2
TERMINALS
●
AV IN
COMPONENT
MONITOR OUT
PC IN
VIDEO, S-VIDEO, AUDIO L&R
Y, Pb (Cb), Pr (Cr)
VIDEO OUT
D-SUB 15PIN RGB IN, DVI
F-TYPE
●
●
●
●
ANTENNA IN
DVD
Applicable disc
●
DVD/CD-R/CD-RW/CD/MP3/Picture CD
Power adapter
●
Output
DC 24Volt, 6.0 Ampere
100~240Volt
●
Input
Power consumption
●
Power consumption (TV)
130 Watt
≤130 Watt
●
Power consumption (DVD)
This manual is only for your reference, any change to the design and specifications will not be advised.
page38
Download from Www.Somanuals.com. All Manuals Search And Download.
page39
Download from Www.Somanuals.com. All Manuals Search And Download.
page40
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|