Owner's Manual
ZV450MW8
DIGITAL VIDEO DISC RECORDER WITH
VIDEO CASSETTE RECORDER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2007 Funai Electric Co., Ltd.
E9C80UD.indd
1
2007/02/07 15:26:40
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Important Safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. (Fig.
A)
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of the
loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or
14. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
sold with the product. Any mounting of
the appliance should follow the
manufacturer’s instructions and should
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
use a mounting accessory recommended
by the manufacturer. An appliance and
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch
dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
product.
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not
be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have
been adhered to.
10. Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult
your appliance dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance
this indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA No. 70, provides
EN
3
E9C80UD.indd
3
2006/12/19 14:03:01
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Installation Location
Supplied Accessories
remote control (NB555UD) with batteries (AAAx2)
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position.
Do not place anything directly on top of the unit.
Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away
from devices of intense heat. Avoid dusty or
humid places. Avoid places with insufficient
ventilation for proper heat dissipation. Do not
block the ventilation holes on the sides of the
unit. Avoid locations subject to strong vibration
or strong magnetic fields.
RF coaxial cable (WPZ0901TM002)
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when
disconnecting it from AC outlet. Grasp it by the
plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to
our Authorized Service Center for servicing.
RCA audio/video cables (WPZ0102TM015/WPZ0102LTE01)
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions
of high humidity. Do not use this unit at least for 2
hours until its inside gets dry.
owner's manual (1VMN23373)
About Copyright
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
quick guide (1VMN23374)
Notice for Progressive Scan Output
Consumers should note that not all high definition
television sets are fully compatible with this
product and may cause artifacts to be displayed in
the picture. In case of picture problems with 525
progressive scan output, it is recommended that
the user switch the connection to the ‘standard
definition’ output. If there are questions regarding
your TV set compatibility with this 525p DVD player,
please contact our customer service center.
4
EN
E9C80UD.indd
4
2006/12/19 14:03:02
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Maintenance
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 90-94 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn off, unplug the power plug and
please call our help line mentioned on the front page
to locate an Authorized Service Center.
1. Please visit your local Audio/Video store and purchase a
good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem,
please consult your dealer or an Authorized Service
Center.
Note
• Remember to read the instructions along with the video
head cleaner before use.
• Clean video heads only when problems occur.
Cleaning the cabinet
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
•
With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
Cleaning the disc lens
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
•
With a digital camera (including built-in
camera of cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control.
If infrared light appears through digital
camera, the remote control is working.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of
Dolby Laboratories.
Auto head cleaning
Dolby Digital Recording
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt
accumulated on the video heads after a long period of
use, or the usage of rental or worn tapes can cause this
problem. If a streaky or snowy picture appears during
playback, the video heads in your unit may need to be
cleaned.
“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable
DVD discs. The technology, when utilized instead of
PCM recording, also saves recordable disc space, allow-
ing for higher video resolution or extended recording
time on each DVD. DVDs created using Dolby Digital
Recording will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN
5
E9C80UD.indd
5
2007/02/07 15:26:40
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Introduction
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . . . . .56
Skipping TV Commercials During Playback . . . . . . . . . . . .56
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . . . . .57
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . . 61
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
SELECTING THE FORMAT OF AUDIO AND VIDEO . . . 63
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . . . . .63
Switching Virtual Surround System . . . . . . . . . . . . . . . . . . . .64
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . . . . . 7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . . 13
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . . 14
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . . 15
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . . 17
THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . . . 18
GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . . 19
On-Screen Display / Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .23
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Daylight Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switching Analog Mode / Digital Mode . . . . . . . . . . . . . . . .27
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Selecting TV Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
DTV Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Editing
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . . 65
Guide to a Title List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Setting Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Hiding Chapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Setting Pictures for Thumbnails . . . . . . . . . . . . . . . . . . . . . . .72
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . . . . .75
Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Recording
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . . 33
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . . . . .34
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
BASIC RECORDING &
Function Setup
LIST OF SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Required Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . . 35
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . . 41
Overwriting from the Beginning of the Title . . . . . . . . . . .41
Overwriting in the Middle of the Title. . . . . . . . . . . . . . . . . .41
Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . . 43
Connection to an External Device . . . . . . . . . . . . . . . . . . . . .43
Recording from an External Device . . . . . . . . . . . . . . . . . . . .44
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . . 45
PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . . 46
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
DUBBING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
VCR Functions
VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . . . . .88
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . .94
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Playback
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . . 50
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Playback from the Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Playing Back a CD-RW/-R with MP3 Files . . . . . . . . . . . . . . .54
Using the Title / Disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . Back cover
6
EN
E9C80UD.indd
6
2006/12/19 14:03:02
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that.
The following features are offered with this unit.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
Recording
DVD mode VCR mode
Dividing titles (DVD+RW/DVD-RW only):
You can divide a title into 2 or more.
This unit is compatible with DVD+RW/DVD-RW, which is
rewritable repeatedly and DVD+R/DVD-R, which is available
for recording once. Even if you choose DVD-RW/DVD-R, these
discs will automatically be recorded in the DVD+VR mode.
Also, this unit allows you to record to the cassette tape. You
can choose either one for your convenience.
Putting name on disc:
You can put your favorite disc name.
Compatibility
DVD mode
Up to 8 program recording:
You can program the unit to record up to 8 programs, with in
a month in advance. Daily or weekly program recordings are
also available.
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance. For DVD-RW/
DVD-R, you need to finalize the recorded discs to play on
other DVD players.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time
[RECORD I] or [REC I] is pressed during recording, the
recording time will be increased by 30 minutes up to 6 hours
for DVD, and 8 hours for VCR. The recording automatically
stops when the recording time you set is reached or the disc
is full.
Others
Dubbing mode:
Progressive scan system
You can copy a DVD disc to a cassette tape or copy a cassette
tape to a DVD disc. This function will be possible only if the
DVD disc or a cassette tape is not copy protected.
You cannot record on a cassette tape when its erase-protection
tab is removed.
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.
Symbols Used in this Owner's Manual
DVD mode
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title list making:
The unit makes a title list with the index automatically.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically.
To specify for what disc type each function is, we put
the following symbols at the beginning of each item to
operate.
* DVD-RW/-R recorded in VR mode or non compatible
recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (see page 77).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Playback
DVD mode
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which
is compatible with Dolby Digital, you can experience the theat-
er surround sound from discs with surround sound system.
Symbol Description
For Recording, Playing, and Editing
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
Playing back on MP3 files:
You can enjoy MP3 files which are recorded on CD-RW/-R.
Description refers to VHS tapes
Use only cassettes marked VHS (
For Playback only
VCR mode
Quick search for what you want to watch:
).
You can easily find the part you want to watch using the index
search/time search functions. An index mark will be assigned
at the beginning of each recording you make. For time search
function, you can go to a specific point on a cassette tape by
entering the exact amount of time you wish to skip.
Description refers to DVD-video
Description refers to audio CD
Editing
Description refers to video CD with PBC function
DVD mode
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
Setting / clearing chapter marks:
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
You can set / clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
EN
7
E9C80UD.indd
7
2007/01/16 14:26:24
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2*
3
15
14
13 12 11 10 9 8* 7
21 2019 18 1716
23 22
6 5
4
( ) The unit can also be turned on by pressing these buttons or insert a cassette tape.
*
1. Cassette compartment (VCR)
Insert a cassette tape here.
14. CHANNEL L / K buttons (DVD/VCR)
Press to change the channel up and down.
2. OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
15. Display
Refer to “Front Panel Display” on page 12.
16. Infrared sensor window (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
17. RECORD I button (VCR)
Place a disc when it is open.
4. AUDIO input jacks (E2) (DVD/VCR)
Use to connect external device with a RCA audio
cable.
5. VIDEO input jack (E2) (DVD/VCR)
Use to connect external device with a RCA video
cable.
6. S-VIDEO input jack (E2) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
7. RECORD I button (DVD)
Press once to start recording.
Press repeatedly to start the one-touch timer
recording.
8. PLAY B button (DVD)*
Press to start or resume playback.
9. STOP C button (DVD)
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
10.DVD indicator
Lights up when the DVD output mode is selected.
11.SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
12.VCR indicator
Lights up when the VCR output mode is selected.
13.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
Press once to start a recording. Press repeatedly to
start the one-touch timer recording.
18. PLAY B button (VCR)
Press to start playback.
19. STOP C / EJECT A button (VCR)
EJECT A button
Press to remove the cassette tape from the cassette
compartment.
STOP C button
Press to stop cassette tape playback or recording.
Press to stop the proceeding timer recording in VCR.
20. F.FWD D button (VCR)
Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward
search).
21. REW E button (VCR)
Press to rewind the cassette tape, or to view the
picture rapidly in reverse during playback (rewind
search).
22. STANDBY-ON y button (DVD/VCR)
Press to turn on and off the unit.
23. POWER ON indicator (DVD/VCR)
Red LED lights up when power is on.
8
EN
E9C80UD.indd
8
2006/12/19 14:03:03
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Rear Panel
1
2
OUT
IN
DVD
DVD/VCR
IN ---AUDIO---OUT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO
VIDEO OUT
Y
L
L
ANTENNA
PB
/CB
L
R
R
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
12 11 10 9 8 7 6 5 4
3
1. AC Power Cord (DVD/VCR)
10. S-VIDEO OUT jack (DVD only)
Connect to a standard AC outlet to supply power to this
unit.
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
11. AUDIO OUT jacks (DVD only)
2. TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
3. TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
4. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with a RCA audio cable.
Use to connect a TV monitor, AV receiver or other
device with a RCA audio cable.
12. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other device with a coaxial digital input jack with a
digital coaxial cable.
5. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with a RCA video cable.
6. VIDEO IN jack (E1) (DVD/VCR)
Use to connect external device with a RCA video
cable.
7. AUDIO IN jacks (E1) (DVD/VCR)
Use to connect external device with a RCA audio
cable.
8. S-VIDEO IN jack (E1) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
9 . COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with a component video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
EN
9
E9C80UD.indd
9
2006/12/19 14:03:03
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
•
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
Open the cover.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
1
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
Insert batteries.
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
2
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
16feet (5m)
30˚
23feet (7m)
16feet (5m)
30˚
STANDBY-ON
Close the cover.
1
3
4
18
19
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
3
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
5
6
7
20
21
22
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Note
23
8
9
11
24
26
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
j
F
i
C
B
25
27
10
h
g
• Do not mix new and old batteries together.
CHANNEL
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
--
+
12
13
14
15
16
17
28
29
30
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
SET
CM SKIP D.DUBBING
RAPID PLAY
31
33
SEARCH
32
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
10 EN
E9C80UD.indd 10
2007/03/01 11:04:53
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
1. DISPLAY button (DVD/VCR)
20.CLEAR button (DVD/VCR)
Press to display the display menu on or off.
2. DTV/TV button (DVD/VCR)
DVD mode:
Press to clear the password once entered or to cancel
the programming for CD or to clear the selecting
marker number in the edit menu or to clear the pro-
gram once entered in the timer programming list, etc.
VCR mode:
Press to switch between digital TV mode (DTV) and
analog TV mode.
3. SOURCE button (DVD/VCR)
Press to select the appropriate input.
4. Number/Character buttons (DVD/VCR)
• Press to select channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main menu.
• Press to enter title names.
• Press to start the index/time search in VCR mode.
5. Confirm ( • ) button (DVD/VCR)
Analog mode:
Press to confirm the channel selection made by
[the Number buttons].
Press to reset the tape counter.
21.SETUP button (DVD/VCR)
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
22.Cursor K / L / { / B buttons (DVD/VCR)
Press to select items or settings.
23.RETURN button (DVD/VCR)
Press to return to the previously displayed menu screen.
24.PLAY B button (DVD/VCR)
Digital mode:
Press to confirm the major / minor channel selection
made by [the Number buttons].
6. DISC MENU button (DVD)
Press to start or resume playback.
25.NEXT G button (DVD)
• During playback, press to skip to the next chapter,
track or file.
Press to display the disc menu.
7. OK button (DVD/VCR)
• When playback is paused, press to play back for-
ward step by step.
Press to confirm or select menu items.
8. TITLE button (DVD)
26.FFW D button (DVD/VCR)
Press to display the title list.
9. PREV H button (DVD)
DVD mode:
• During playback, press to play back fast forward.
• When playback is paused, press to play back slow
forward.
• During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is paused, press to play back reverse
step by step.
VCR mode:
• During playback, press to rapidly advance the
cassette tape or view the picture rapidly in forward.
• When playback is paused, press to view the cassette
tape in slow motion.
10.REW E button (DVD/VCR)
DVD mode:
• During playback, press to fast reverse.
• When playback is paused, press to play slow reverse.
VCR mode:
27.STOP C button (DVD/VCR)
• Press to stop playback or recording.
• Press to exit from the title list.
• During playback, press to rewind the cassette tape
or to view the picture rapidly in reverse.
11.PAUSE F button (DVD/VCR)
Press to pause playback or recording.
28.DVD button
• Press to select the DVD output mode.
29.TIMER button (DVD/VCR)
12.CHANNEL
/
buttons (DVD/VCR)
Press to display the timer programming list.
30.AUDIO button (DVD/VCR)
DVD mode:
Press to change the channel up and down.
VCR mode:
• Press to change the channel up and down.
• Press to adjust the tracking during playback or in
slow motion of the cassette tape.
• While playback is in still mode, you can adjust the
picture blurred vertically.
Analog mode:
During playback, press to display the audio menu.
Digital mode:
• When playback is in stop mode, press to switch the
audio language.
• During playback, press to display the audio menu.
• During playback a HiFi video tape, press to change
the audio out setting HiFi and mono (VCR).
31.RAPID PLAY button (DVD)
13.VCR button
• Press to select the VCR output mode.
14.REC MODE button (DVD/VCR)
Press to switch the recording mode.
15.REC I button (DVD/VCR)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
16.CM SKIP button (DVD)
During playback, press to skip 30 seconds.
17.SEARCH button (VCR)
During playback, press to playback in a slightly fast-
er/slower mode with keeping the audio quality.
32.TIMER SET button (DVD/VCR)
Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode
and to turn the unit on.
33.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
Press to call up the index or time search menu.
18.STANDBY-ON y button (DVD/VCR)
Press to turn the unit on and off. If timer program-
mings have been set, press to set the unit in timer-
standby mode.
Note
19.OPEN/CLOSE A button (DVD/VCR)
DVD mode:
• If you turn off this unit, [OPEN/CLOSE A] on the remote
control is not available.
Press to open or close the disc tray.
VCR mode:
Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A]
on the unit.
Press to remove the cassette tape from the cassette
compartment.
EN 11
E9C80UD.indd 11
2007/03/01 11:04:53
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel Display
4
2
1
6
3
7
5
1. Current status of the unit
: Appears when a DVD is on
3. Recording mode
the disc tray.
: Appears when playback is
paused.
: Indicates the recording speed of
the disc or a cassette tape.
: Appears when the timer
recording is proceeding in
DVD.
: Appears when DVD is in
the timer recording
standby mode.
: Flashes when a program
cannot be performed for
some reasons.
: Appears when playing back
a disc or a cassette tape.
4. Title/track/file and chapter
mark
: Appears when the timer
programming or OTR has
been set and is proceeding.
: Flashes when all timer
recordings have been
finished.
: Appears when indicating a
title/track/file number.
: Appears when indicating a
chapter number.
5. Displays the following
• Elapsed playback time
• Current title/chapter/track/file
number
• Recording time/remaining time
• Clock
• Channel number
• VCR tape counter
: Appears during recording
process.
: Flashes when a recording
pauses.
: Appears when a DVD+R/-R
is on the disc tray.
: Appears when a
DVD+RW/-RW is on the
disc tray.
: Appears during repeat
playback.
: Appears when the timer
recording is proceeding
in VCR.
: Appears when VCR is
in the timer recording
standby mode.
: Flashes when a program
cannot be performed for
some reasons.
• Remaining time for one-touch
timer recording
: Appears when a cassette
tape is in the unit.
6.
2. Disc type and current status
of the unit
: Appears in the afternoon
with the clock display.
: Appears when an audio CD,
a CD-RW/-R with MP3 files is
on the disc tray.
7.
: Appears when the
progressive scan system is
activated.
: Appears when a video CD is
on the disc tray.
: Appears during VCR to
DVD duplication process.
: Appears during DVD to
VCR duplication process.
Display Message
Appears when the disc tray is
opening.
Appears when a disc is loaded
on the disc tray.
Appears when data is being
written on a disc.
Appears when the disc tray is
closing.
Appears when the PBC function
is activated. (Video CD playback
only. Refer to page 50.)
12 EN
E9C80UD.indd 12
2007/01/18 14:37:39
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA CABLE CONNECTION
This section describes how to connect your unit to an antenna, cable box, etc.
Disconnect the power cord of your TV from the AC outlet.
1
2
Disconnect RF coaxial cable from antenna input jack of your TV.
VHF / UHF
antenna
rear of your TV
or
ANT. IN
1
RF coaxial cable
cable TV
company
disconnect
2
disconnect
Connect cables to the unit.
Make the basic connection as illustrated below.
3
4
rear of this unit
OUT
DVD/VCR
DVD/VCR
S-VIDEO
IN ---AUDIO---OUT
L
L
S-VIDEO
IN ---AUDIO---OUT
IN
ANTENNA
VHF / UHF
antenna
R
R
IN
IAL
IN ---VIDEO---OUT
OUT
L
RF coaxial
cable
R
IN
IN
IN ---VIDEO---OUT
ANTENNA
or
rear of your TV
RF coaxial cable
cable TV
company
This connection is for
TV loop through only
RCA audio
cable
RCA video
cable
R
L
ANT. IN
AUDIO IN VIDEO IN
Plug in the power cord of this unit and your TV to the AC outlet.
rear of your TV
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
connect
*Once connections are completed, turn on the TV and
begin initial setting.
rear of this unit
OUT
Channel scanning is necessary for the unit to memorize
all available channels in your area.
(Refer to “INITIAL SETTING” on page 21.)
DVD
AUDIO
OUT
DVD/VCR
IN ---AUDIO---OUT
DIGITAL
S-VIDEO COMPONENT S-VIDEO
VIDEO OUT
AUDIO OUT
Y
L
L
IN
ANTENNA
PB
/CB
L
R
R
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack
before moving the unit.
• If you use an antenna to receive analog TV, it should also work for digital TV reception. Outdoor or attic antennas
will be more effective than set-top versions.
• RF output is for tuner pass through only. DVD playback through the RF is not possible.
EN 13
E9C80UD.indd 13
2006/12/19 14:03:04
Download from Www.Somanuals.com. All Manuals Search And Download.
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF
modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
rear of this unit
OUT
DVD/VCR
DVD/VCR
IN ---AUDIO---OUT
S-VIDEO
S-VIDEO
IN ---AUDIO---OUT
L
L
IN
ANTENNA
R
R
IN
IN ---VIDEO---OUT
L
VHF / UHF
antenna
rear of your TV
R
IN
OUT
IN
IN ---VIDEO---OUT
RF coaxial cable
or
ANTENNA
cable TV
company
RCA audio
cable
RCA video
cable
RF coaxial cable
ANT. IN
R
L
3
4
TO TV
AUDIO IN VIDEO IN
CHANNEL
ANT. IN
Set channel 3 or 4
rear of your
RF modulator
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• The quality of picture may become poor if this unit is connected to an RF modulator.
14 EN
E9C80UD.indd 14
2006/12/19 14:03:05
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A CABLE / SATELLITE BOX
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Plug in the power cords of the devices to the AC outlet.
e.g.)
RCA video cable
rear of this unit
RCA audio
cable
OUT
DVD/VCR
DVD/VCR
IN ---AUDIO---OUT
OUT
S-VIDEO
S-VIDEO
IN --- AUDIO---OUT
L
L
IN
ANTENNA
R
R
IN
R
L
IN ---VIDEO---OUT
VIDEO OUT
AUDIO OUT
L
cable/satellite
box
IN
ANTENNA
R
IN
IN ---VIDEO---OUT
RF coaxial
cable
RF coaxial
cable
This connection is
for TV loop
through only
RF OUT ANT. IN
satellite
dish
ANT. IN
rear of your TV
RCA audio
cable
RCA video
cable
RF coaxial
cable
or
R
L
cable TV
company
VIDEO IN
AUDIO IN
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Note to CATV system installer
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
EN 15
E9C80UD.indd 15
2006/12/19 14:03:06
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device.
VCR and basic DVD connection
RCA audio
cable
TV
RCA video
cable
R
L
VIDEO
IN
AUDIO IN
DVD/VCR
IN ---AUDIO---OUT
S-VIDEO
this unit
L
L
DVD
UDIO
OUT
DVD/VCR
IN -AUDIO--OUT
DIGITAL
A
S-VIDEO COMPONENT S-VIDEO
--
-
VIDEO OUT
A
UDIO OUT
Y
L
L
R
R
A
IN
PB
CB
L
R
R
OUT
IN
COAXIAL
IN ---VIDEO--OUT
-
PR
/CR
R
IN ---VIDEO---OUT
AUDIO OUT (DVD/VCR)
VIDEO OUT
Available on DVD only
TV
Method 1
Method 2
analog audio
good picture
better picture
COMPONENT
VIDEO IN
S-VIDEO IN
Y
(Green)
PB/CB
(Blue)
PR/CR
(Red)
R
L
AUDIO IN
and
or
RCA audio cable
S-video cable
component video cable
DVD
DVD
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONEN
this unit
(Green)
VIDEO OUT
VIDEO OUT
VIDEO OUT
Y
Y
Y
DVD
UDIO
OUT
(Blue)
(Red)
DIGITAL
A
S-VIDEO COMPONENT S
VIDEO OUT
A
UDIO OUT
Y
PB
PB
P
/C
L
L
L
OUT
/CB
OUT
/CB
P
/C
L
OUT
COAXIAL
P
/C
COAXIAL
COAXIAL
COAXIAL
R
PR
/CR
PR
/CR
PR
/CR
R
R
R
S-VIDEO OUT
COMPONENT
VIDEO OUTPUT
AUDIO OUT (DVD)
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original
remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your
TV owner’s manual for details.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when
you made either S-video or component video out connection.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
To set progressive scan mode, refer to page 83
• This unit is compatible with the progressive scan system. The feature provides you with the higher definition images
than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”.
16 EN
E9C80UD.indd 16
2007/01/15 19:11:56
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Playing Back Multi Channel Digital Audio
Playing Back 2 Channel Analog Audio
stereo system
Dolby Digital decoder,
MD deck or DAT deck
audio
COAXIAL
digital audio
coaxial input
jack
R
L
AUDIO IN
analog audio
input jacks
digital audio
coaxial cable
or
RCA audio cable
DVD
DVD/VCR
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
S-VIDEO
IN --- AUDIO---OUT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
VIDEO OUT
VIDEO OUT
Y
L
Y
OUT
IN
DVD
DVD/VCR
IN ---AUDIO-
DVD
DVD/VCR
IN ---AUDIO-
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO
-
-OUT
DIGITAL
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO
-
-OUT
VIDEO OUT
VIDEO OUT
AUDIO OUT
Y
L
L
Y
L
L
PB
/CB
PB
/CB
L
R
L
ANTENNA
OUT
IN
OUT
PB
/CB
PB
/CB
L
R
R
L
R
R
OUT
IN
OUT
IN
COAXIAL
IN ---VIDEO-
--OUT
IN ---VIDEO--OUT
-
PR
/CR
PR
/CR
COAXIAL
COAXIAL
R
R
IN ---VIDEO---OUT
PR
/CR
PR
/CR
R
R
this unit
AUDIO OUT
DIGITAL AUDIO OUTPUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Setting
Setup >Playback >Disc Audio >Digital Out >
Dolby Digital
Connection
If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder.
STREAM
Connecting to an MD deck or DAT deck.
If not connected to any external devices.
PCM
PCM
* To complete these settings, refer to page 83.
Note
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
EN 17
E9C80UD.indd 17
2006/12/19 14:03:07
Download from Www.Somanuals.com. All Manuals Search And Download.
THE VCR / DVD RECORDER SWITCHING
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish
to operate with [SOURCE].
STANDBY-ON
DVD mode
SOURCE
DTV/TV
DISPLAY OPEN/CLOSE
A
Press [DVD] on the remote control.
.@/:
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
(Verify that the DVD indicator is lit.)
PQRS
TUV
WXYZ
7
8
9
VCR mode
SPACE
CLEAR
.
0
Press [VCR] on the remote control.
DISC MENU
SETUP
o
(Verify that the VCR indicator is lit.)
s
B
OK
p
TITLE
RETURN
j
F
i
C
B
DVD indicator
SOURCE button
VCR indicator
h
g
VCR button
DVD button
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• You cannot switch to another mode (DVD or VCR) during in the timer-standby mode.
18 EN
E9C80UD.indd 18
2006/12/19 14:03:07
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen display give you the information on the loaded disc, the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
On-Screen Display / Menu
The on-screen display changes in the following order
as you press [DISPLAY].
OFF
DTV Program Guide (only in DTV mode)
Disc Information/Menu (only when a disc is loaded)
DTV Program Guide
1. Broadcast station
1
KABC
5
2. Program title (max. 2 lines displayed)
3. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
4. Program guide (max. 6 lines displayed)
5. Channel number
DTV 6.1
A Day of Memories
25
35
English 1/2
A quarter-century ago, which may now
qualify as the good old days of
newspapering, run-of-paper sales
accounted for 80 percent of the
industry's advertising revenues.
45
Note
• When the program guide is displayed in more than 7
lines, use [K / L] to scroll.
• “No description provided” is displayed when the
program guide is not provided.
Disc Information / Menu
DVD mode
VCR mode
4
5
1
1
1
1
0:00:00
DVD+RW
12:00AM
CH 21
Stereo
2
3
CH
2
2
SP
0:00:00
HIFI
HQ(1Hr)
1:01
6
3
4
5
6
1. Indicates current video status.
2. Indicates the current time.
1. Indicates a disc type.
2. Indicates a channel number or selected external input
mode.
3. Indicates a recording mode and possible recording
time left.
4. Indicates a title number, chapter number and the time
lapse of disc playback.
3. Indicates a current channel number and an audio
status of the program.
4. Indicates a recording or playing back mode.
5. Indicates a tape counter.
6. Audio status of the current cassette tape.
5. Each icon means:
: Search
: Audio
: Subtitle
: Angle
: Marker
: Noise Reduction
: Zoom
Note
: Surround
• This is an example screen only for explanation.
Displayed items are depending on the disc you
inserted.
: Repeat
6. Indicates an operation status.
EN 19
E9C80UD.indd 19
2006/12/19 14:03:07
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Main Menu
Press [SETUP] to display the main menu. Then use
1. Required Settings:
To set up the required settings.
2. Playback:
To set up the unit to play back discs as you prefer.
3. Display:
[K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions
of the unit.
To set up the on-screen display as you prefer.
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. Disc Edit / CD Playback Mode:
• “Disc Edit” is only available with disc recorded in this
unit.
Setup
Required Settings
1
Playback
2
Display
3
Recording
4
Clock
5
Channel
6
Disc Edit
7
• “CD Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 files is inserted
into the unit.
Disc Edit / CD Playback Mode
<Disc Edit menu (DVD+RW)>
1. Edit Disc Name:
Allows you to rename the disc.
2. Disc Protect :
Allows you to protect a disc from accidental editing or
recording.
Disc Edit
Edit Disc Name
1
2
3
34
Disc Protect OFF ON
Erase Disc
Make Edits Compatible
3. Erase Disc: (DVD+RW/DVD-RWonly)
Allows you to erase all contents in the disc and format
it.
4. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if
you have added or deleted chapters, or made chapters
hidden on this unit, and to effect it when playing back
on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
5. Random Play:
<Disc Edit menu (DVD-RW)>
Disc Edit
Edit Disc Name
1
2
3
34
Disc Protect OFF ON
Erase Disc
Finalize
Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
<Disc Edit menu (DVD+R/DVD-R)>
Allows you to select images or information on the
menu screen by activating PBC (playback control)
function.
Disc Edit
Edit Disc Name
1
Disc Protect OFF ON
2
Finalize
34
<CD Playback Mode menu>
CD Playback Mode
Random Play
45
Program Play
56
PBC (Video CD only)
ON
57
20 EN
E9C80UD.indd 20
2006/12/19 14:03:07
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
Press [STANDBY-ON y].
STANDBY-ON
Before:
1
2
Turn the TV on. Select the input to
which the unit is connected.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Use [K / L] to select your desired
language, then press [OK] to set
language.
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
Initial Setup
SPACE
CLEAR
English
Français
Español
.
0
DISC MENU
SETUP
o
Use [K / L] to select the type of
broadcasting signal, then press [OK].
s
B
OK
p
TITLE
RETURN
3
Initial Setup
j
F
i
B
Antenna
Cable (Analog)
Cable (Analog / Digital)
h
g
C
CHANNEL
The unit will start getting channels available in
your area.
Antenna:
--
+
REC MODE VCR
DVD
TIMER
AUDIO
(When using antenna)
REC
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
CH
1
Auto Presetting Now
Press [OK] to activate “Clock Setting”.
Initial Setup
4
5
Clock Setting
Proceed to step 4 in “Manual Clock
Setting” on page 26.
• If a PBS (public broadcasting station) is
available in your area, follow “Auto Clock
Setting” on page 25.
EN 21
E9C80UD.indd 21
2007/01/18 14:37:41
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
Press [SETUP].
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
3
4
PQRS
TUV
WXYZ
Use [K / L] to select “Auto Channel
Preset”, then press [OK].
7
8
9
CLEAR
SPACE
.
0
DISC MENU
SETUP
o
Use [K / L] to select the type of
broadcasting signal, then press [OK].
s
B
OK
p
VCR DVD
TITLE
RETURN
Auto Channel Preset
Antenna
Cable (Analog)
Cable (Analog / Digital)
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
The unit will start getting channels available in
your area.
• When aerial antenna is connected, select
“Antenna”.
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
• When connected to CATV, select “Cable
(Analog)” or “Cable (Analog/Digital)”.
SEARCH
To cancel the auto channel preset during
scanning:
Press [RETURN] or [SETUP] to cancel.
When scanning is over, press [SETUP]
to exit.
5
To cycle through only the memorized channels, use
[CHANNEL
/
].
To select a channel directly (including the ones not
memorized), use [the Number buttons].
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
• The selection will depend on how you receive the TV
channels.
• You cannot change the channel when either VCR or
DVD is in any recording mode (basic recording, one-
touch timer recording or timer recording).
22 EN
E9C80UD.indd 22
2006/12/19 14:03:09
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding channel is only available for the analog TV
channels.
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add/delete channels.
1
2
3
4
Make sure
Press [SETUP].
• You perform “Auto Channel Scan” before adding or
deleting the channels.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Manual Channel
Preset”, then press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
VCR DVD
Channel
Auto Channel Preset
PQRS
TUV
WXYZ
Manual Channel Preset
7
8
9
CLEAR
SPACE
.
0
DISC MENU
SETUP
o
s
B
OK
p
• If you are adding or deleting analog TV
channels, go to to continue.
• If you are deleting digital TV channels, go to
to continue.
TITLE
RETURN
ANALOG
DIGITAL
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Instructions continue on the next page.
EN 23
E9C80UD.indd 23
2006/12/19 14:03:09
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
DIGITAL
ANALOG
Select the channel number to add or
delete.
Select the channel number to delete.
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
• Use [CHANNEL
/
] to cycle through only
5
5
the memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
• Use [CHANNEL
the memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
/
] to cycle through only
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Use [K / L] to select “Add” or
“Delete”, then press [OK].
6
7
VCR DVD
Manual Channel Preset
Use [K / L] to select “Delete”, then
press [OK]. Then select the next
channel to delete.
6
CH
Add
Delete
2
• If the setting is complete, press [RETURN] to
activate “Manual Channel Preset”.
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
VCR DVD
Manual Channel Preset
DTV
Add
Delete
2
(CH - - - )
Press [SETUP] to exit.
Your setting will be activated.
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Press [SETUP] to exit.
7
24 EN
E9C80UD.indd 24
2006/12/19 14:03:09
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 26.
Auto Clock Setting
This unit can set the time and date automatically by
referring to a PBS station.
Press [SETUP].
Make sure
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 22.)
• If this unit is connected to a cable/satellite box,
select the local PBS station on them to set the clock
automatically.
1
2
3
4
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
STANDBY-ON
Use [K / L] to select “Auto Clock
Setting”, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Auto”, then
press [OK].
PQRS
TUV
WXYZ
Auto Clock Setting
VCR DVD
7
8
9
CLEAR
OFF
SPACE
Auto
Manual
.
0
DISC MENU
SETUP
o
Press [SETUP] to exit.
s
B
OK
p
TITLE
RETURN
5
6
Press [STANDBY-ON y] to turn off
j
F
i
B
the unit.
h
g
C
This unit will search for the time only when the
power is off. Leave it off for several minutes to
give this unit time to set the clock.
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Select “Manual” at step 4, then press
[OK].
1
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [OK].
2
VCR DVD
Auto Clock Setting - Manual
Set Channel No.
Note
CH
1
• The clock may set itself automatically after you
connect the antenna/cable signal to this unit and
plug in the power cord.
• Only the analog PBS channel signal is effective for
auto clock setting.
Press [SETUP] and turn off the unit.
3
• The unit receives the clock data at 12:00 a.m. / p.m.
from the PBS channel when the power is off.
EN 25
E9C80UD.indd 25
2006/12/19 14:03:10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Clock Setting
Press [SETUP].
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
“ON (MAR - NOV)” has been selected as the default.
1
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Press [SETUP].
2
3
4
1
Use [K / L] to select “Clock Setting”,
then press [OK].
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
2
Use [K / L] to select calendar or time,
Use [K / L] to select “Daylight Saving
Time”, then press [OK].
then press [OK].
Clock Setting
VCR DVD
3
Use [K / L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
then press [OK].
JAN / 01 / 2007 ( MON )
12: 00 AM
4
Daylight Saving Time
VCR DVD
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK].
ON (MAR - NOV)
ON (APR - OCT)
OFF
5
VCR DVD
Clock Setting
JAN / 01 / 2007 ( MON )
12: 00 AM
ON (MAR - NOV):
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
Your setting will be activated.
Although seconds are not displayed, they begin
counting from 0.
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
Press [SETUP] to exit.
6
Press [SETUP] to exit.
5
Note
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• Select “ON” when currently utilizing the daylight
saving time.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2006
up to 2056.
26 EN
E9C80UD.indd 26
2007/01/15 19:11:57
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Digital TV Channels>
Switching Analog Mode /
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
Digital Mode
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control and enjoy viewing the
HDTV (high definition TV) programs as well as the SDTV
(standard definition TV) programs with simple operation.
e.g.) 2-2 ch:
major channel
minor channel
[0] + [2] or [2] + [•]
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 35-16ch:
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
• When you press [DTV/TV] in external input, the analog
mode and digital mode will be switched.
major channel
minor channel
[3] + [5]
[1] + [6]
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Note
• When you switch the analog mode to the digital
mode, it may take a while until the digital channel
selection is completed. The following screen is
displayed while switching the mode.
Note
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
Now Scanning
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
What is the minor channel?
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
signal network.
Channel Selection
Select channels by using [CHANNEL
Number buttons] found on remote control.
/
] or [the
[CHANNEL
/
]
Use [CHANNEL
/
] to change the channel.
[Air Time]
NTSC (analog mode)
ATSC (digital mode)
18:00
18:30
19:00
19:30
20:00
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
smallest smallest
CH4-1
CH
CH
CH4-1 CH4-2 CH4-3
smallest
<Analog TV Channels>
CH4
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
CH4-1
CH4-3
CH
e.g.) 2 ch:
[0] + [2], [2] + [•] or
smallest
CH
CH4-1 CH4-2
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 12ch: [1] + [2]
minor channel
major channel
: change automatically
: change manually by using [CH
/
]
EN 27
E9C80UD.indd 27
2006/12/19 14:03:10
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Selecting TV Audio
Digital TV
Press [AUDIO] to cycle through
STANDBY-ON
available audio languages.
English 1/2
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
• When you press [AUDIO], selected language
will be displayed on the TV screen.
.
0
DISC MENU
SETUP
• Every time you press [AUDIO], the language
will be switched.
o
e.g.) English 1/3 → Spanish 2/3 → Other 3/3
s
B
OK
p
• Available languages differ depending on the
broadcast.
TITLE
RETURN
• The information display will automatically
disappear in 1 minute.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• The timer recording for digital TV cannot record any
audio language other than English.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
28 EN
E9C80UD.indd 28
2006/12/19 14:03:11
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
Press [SETUP].
STANDBY-ON
1
2
3
4
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Required
Settings”, then press [OK].
“Required Settings” menu will appear.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
Use [K / L] to select “TV Audio
Select”, then press [OK].
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
o
s
B
OK
p
TV Audio Select
VCR DVD
TITLE
RETURN
Stereo
SAP
j
F
i
B
h
g
C
Stereo:
Outputs main-audio.
SAP (secondary audio program):
CHANNEL
--
+
Outputs sub-audio.
REC MODE VCR
DVD
TIMER
AUDIO
REC
Press [SETUP] to exit.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
5
SEARCH
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “Required Settings” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
Broadcast
audio
Disc
Audio
recording
output
Stereo
STEREO+SAP
STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
STEREO
MONO
MONO
SAP
MONO+SAP
MONO
SAP
STEREO+SAP
STEREO
STEREO
SAP
STEREO
SAP
MONO+SAP
MONO
MONO
MONO
EN 29
E9C80UD.indd 29
2006/12/19 14:03:11
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
Press [SETUP].
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Required
Settings”, then press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
3
PQRS
TUV
WXYZ
Use [K / L] to select “CC Style”, then
7
8
9
press [OK].
SPACE
CLEAR
.
Required Settings
VCR DVD
0
DISC MENU
SETUP
Video Input
TV Aspect
TV Audio Select
CC Style
4:3 Letter Box
Stereo
o
s
B
OK
p
V-Chip
TITLE
RETURN
Use [K / L] to select “DTV CC”, then
press [OK].
j
F
i
B
h
g
C
4
5
CC Style
VCR DVD
CHANNEL
DTV CC
OFF
User Setting
Font Size
OFF
--
+
Middle
Style1
NONE
Solid
White
Solid
Black
Font Style
REC MODE VCR
DVD
TIMER
AUDIO
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Use [K / L] to the desired DTV closed
caption, then press [OK].
VCR DVD
DTV CC
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
Note
Press [SETUP] to exit.
• Even if you set “DTV CC” to anything other than
“OFF”, its effect will temporarily be canceled while
recording.
6
30 EN
E9C80UD.indd 30
2007/02/07 15:26:40
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Press [SETUP].
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Required
Settings”, then press [OK].
A
ABC
DEF
2
3
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “CC Style”, then
press [OK].
PQRS
TUV
WXYZ
7
8
9
Required Settings
VCR DVD
SPACE
CLEAR
.
Video Input
0
TV Aspect
TV Audio Select
CC Style
4:3 Letter Box
Stereo
DISC MENU
SETUP
o
V-Chip
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “User Setting”,
then press [OK].
j
F
i
B
4
5
CC Style
VCR DVD
h
g
C
DTV CC
OFF
User Setting
Font Size
OFF
CHANNEL
Middle
Style1
NONE
Solid
White
Solid
Black
--
+
Font Style
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Use [K / L] to select “ON”, then press
[OK].
VCR DVD
User Setting
OFF
ON
Font Size
Middle
Style1
NONE
Solid
Font Style
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
White
Solid
Black
Instructions continue on the next page.
EN 31
E9C80UD.indd 31
2007/02/07 15:26:41
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [OK].
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
6
VCR DVD
Font Opacity
Solid
Translucent
Flash
• The setting description for each item is shown
below.
<Font Size>
Font size of the displayed caption can be
switched as below.
<Font Color>
Font color of the displayed caption can be
Font Size
VCR DVD
switched as below.
Middle
Large
Small
VCR DVD
Font Color
Transparent
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Style>
Font style of the displayed caption can be
switched as below.
<Back Opacity>
Font Style
VCR DVD
Background opacity of the displayed caption can
be switched as below.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Back Opacity
VCR DVD
Solid
Translucent
Flash
<Edge Type>
Edge type of the displayed caption can be
switched as below.
<Back Color>
Edge Type
VCR DVD
Background color of the displayed caption can
be switched as below.
NONE
Raised
VCR DVD
Back Color
Depressed
Uniform
L. Shadow
R. Shadow
Transparent
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Press [SETUP] to exit.
7
32 EN
E9C80UD.indd 32
2006/12/19 14:03:12
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DVD RECORDING
Before you make a recording, read the following information.
Recordable Discs
Recording Mode
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/DVD-R will be recorded in the DVD+VR mode
automatically in this unit.
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
Recording Recording
Video/sound
quality
Disc size
8cm Disc
mode
time
18 min
36 min
(good)
HQ (1Hr)
SP (2Hr)
Logo
Attributes
SPP (2.5Hr) 45 min
LP (3Hr)
EP (4Hr)
SLP (6Hr)
HQ (1Hr)
SP (2Hr)
54 min
72 min
8cm/12cm, single-sided,
single layer disc
(poor)
(good)
108 min
60 min
DVD+RW
DVD+R
Approx. max. recording time
(SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
120 min
SPP (2.5Hr) 150 min
12cm Disc
LP (3Hr)
EP (4Hr)
SLP (6Hr)
180 min
240 min
360 min
(poor)
DVD-RW
DVD-R
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
• Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Note
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 78 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize.
Unrecordable Discs
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc. (Refer to page 77.)
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
• You cannot record copy-protected program using
this unit. (Copy-protected signal is included in DVD-
video or some satellite broadcasts.)
• You cannot record “copy-once only” program on
DVD.
EN 33
E9C80UD.indd 33
2006/12/19 14:03:12
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE RECORDING
Make Recording Compatible
Setting for Auto Chapter
You can set a specified time for chapter marks.
Use this feature to make the unfinalized + VR mode discs
recorded on other unit recordable on this unit. When you
make an additional recording on this unit with “Replace
Disc Menu” set to “ON”, the title menu is automatically
converted to our style.
1) Press [SETUP].
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
3) Use [K / L] to select “Auto Chapter”, then press [OK].
1) Press [SETUP].
4) Use [K / L] to select a desired time option, then
press [OK].
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
Auto Chapter
DVD
3) Use [K / L] to select “Replace Disc Menu”, then
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Replace Disc Menu
DVD
ON
OFF
5) Press [SETUP] to exit.
Note
• The interval for auto chapter marks may slightly
differ.
• A blank chapter may be created depending on the
remaining time of the disc.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
OFF: Prohibiting additional record to the disc that
has a title list created by other units.
5) Press [SETUP] to exit.
34 EN
E9C80UD.indd 34
2006/12/19 14:03:13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
1
2
Press [DVD].
STANDBY-ON
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
Align the disc to
the disc tray guide.
.
0
DISC MENU
SETUP
o
* Make sure the disc is compatible with this unit.
(Refer to page 33 for the list of compatible discs.)
s
B
OK
p
TITLE
RETURN
Press [OPEN/CLOSE A] to close the
disc tray.
j
F
i
B
3
4
It may take a while to load
the disc completely.
h
g
C
CHANNEL
• When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
SET
CM SKIP D.DUBBING
RAPID PLAY
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 33 for DVD.
SEARCH
HQ (1Hr)
0:58
Use [CHANNEL
/
] or [the Number
buttons] to select a desired channel
to record.
5
CH 12
Instructions continue on the next page.
EN 35
E9C80UD.indd 35
2006/12/19 14:03:13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC I] to start recording.
“I” will be displayed for 5 seconds.
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 65.)
6
7
e.g.) DVD+R
I
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.
Writing to Disc
90%
To set one-touch timer recording (OTR)...
1
SP(2Hr)
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 6 hours) appears on the TV screen.
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)
One-touch timer recording will start.
I
0:30
• Press [STOP C] to exit the title list.
0:30
(normal recording)
1:00
6:00
5:30
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on page 29 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby
mode to use the unit continuously.
36 EN
E9C80UD.indd 36
2006/12/19 14:03:13
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
You can program the unit to record up to 8 programs
within a month in advance. Daily or weekly program
recordings are also available.
STANDBY-ON
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space or
a cassette tape with a erase-protection tab.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Press [TIMER].
PQRS
TUV
WXYZ
7
8
9
1
SPACE
CLEAR
.
0
Use [K / L] to select a program
number, then press [OK].
2
DISC MENU
SETUP
o
Timer Programming
VCR DVD
DVD
s
B
OK
p
Date
---
Start
End
CH
Mode
VCR
1.
2.
3.
4.
TITLE
RETURN
---
---
---
j
F
i
B
h
g
C
Use [K / L] to enter the date, then
press [B].
CHANNEL
--
+
3
Timer Programming
VCR DVD
REC MODE VCR
DVD
TIMER
AUDIO
DVD
VCR
Date
Start
End
--:--
CH
12
Mode
1. JAN/01 --:--
DVD
REC
2.
3.
4.
---
---
---
I
TIMER
SET
CM SKIP D.DUBBING
RAPID PLAY
SEARCH
When pressing [L] at the
current date, the date will
change as follows.
e.g.) January 1st
Note
• If you have not set the clock yet:
JAN/01
“Manual Clock Setting” menu will appear instead of
the timer programming list at step 1. Continue with
the step 4 in “Manual Clock Setting” on page 26
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
p
Daily
p
MON-SAT
p
MON-FRI
p
SAT
p
• If a basic recording or one-touch timer recording is in
progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is
about to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes
before the programmed starting time, and the
recording in progress (for VCR) will be canceled
UNLESS their recording channels are the same. If their
recording channels are the same, the timer recording
will start without canceling the recording currently in
progress. In this case, the recording of the same
channel will be made on both DVD and VCR.
FRI
p
p
SUN
p
JAN/31
Use [K / L] or [the Number buttons]
to enter the start and end time, then
press [B].
4
Timer Programming
VCR DVD
• Cancel the timer-standby mode by pressing
[TIMER SET] before operation for either DVD or VCR.
When finished operating, press [TIMER SET] to
resume the timer-standby mode.
DVD
VCR
Date
Start
End
CH
12
Mode
1. JAN/01 11:57AM --:--
DVD
2.
3.
4.
---
---
---
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which is
not currently timer-programmed.
Instructions continue on the next page.
EN 37
E9C80UD.indd 37
2006/12/19 14:03:14
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K / L] to select analog (“- - -”) /
digital (“DTV”) mode or external
Use [K / L] to select a recording
mode.
5
6
input (E1 / E2), then press [B].
7
Timer Programming
VCR DVD
DVD
VCR
Date Start End
CH
Mode
Timer Programming
VCR DVD
1. JAN/01 11:57AM 10:57PM DTV 125.10 DVD SP
DVD
Date
Start
End
CH
12
Mode
VCR
2.
3.
4.
---
---
---
1. JAN/01 11:57AM 10:57PM
DVD
2.
3.
4.
---
---
---
Refer to “Recording Mode” on page 33 for DVD
or “Recording” on page 87 for VCR.
To record from external input (e.g., cable/
satellite box), select E1 or E2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on this page
for more details.
When “Auto” is selected as a recording mode,
the unit calculates how much time is available
on the disc and determines the appropriate
recording mode to complete recording the
program.
Timer Programming
Date Start End
VCR DVD
DVD
VCR
CH
Mode
e.g.) analog mode
1. JAN/01 12:00PM 1:00PM DTV 125.10 DVD Auto
2.
3.
4.
---
---
---
Timer Programming
VCR DVD
DVD
Date
Start
End
CH
10
Mode
VCR
1. JAN/01 11:57AM 10:57PM
DVD
2.
3.
4.
---
---
---
Press [OK] when all items are
entered.
e.g.) digital mode
Your program setting will be stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
8
9
Timer Programming
VCR DVD
DVD
VCR
Date
Start
End
CH
Mode
1. JAN/01 11:57AM 10:57PM DTV 125.10 DVD
2.
3.
4.
---
---
---
• When 2 or more programs are overlapped,
“Overlap” and the overlapped program
number will appear.
Use [K / L] to select a recording
media (“DVD” or “VCR”).
Press [TIMER SET] to set a timer
programming.
Timer Programming
VCR DVD
DVD
VCR
Date Start End
CH
Mode
1. JAN/01 11:57AM 10:57PM DTV 125.10 DVD
2. ---
How to select a channel number for the timer recording
Analog TV
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
Digital TV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
minor channels
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
38 EN
E9C80UD.indd 38
2006/12/19 14:03:15
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Checking, canceling, or correcting the timer
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
programming information
1) Press [TIMER SET].
Timer Programming
Date Start End
VCR DVD
2) Press [TIMER].
DVD
VCR
CH
8
Mode
JAN/01 12:57AM 1:57PM
DVD E22
*
2.
---
---
---
---
---
---
---
3) Check the information on the list you will need.
3.
4.
5.
6.
7.
8.
Timer Programming
VCR DVD
DVD
VCR
Date
Start
End
CH
8
Mode
1. JAN/01 12:57AM 1:57PM
DVD HQ
2.
3.
4.
5.
6.
7.
8.
---
---
---
---
---
---
---
Press [CLEAR] to erase the selected program.
Each error number means:
E1-22 Recording error other E41
E37-39 than below
Power failed
4) To clear the timer programming:
Use [K / L] to select the program, then press
E24
Unrecordable disc
E42
E43
E44
E45
E46
No disc when
recording
[CLEAR].
E25-26 Copy prohibited
program
Already 49 titles
recorded
To correct the timer programming:
Use [K / L] to select your desired program, then
press [OK].
Next, correct the timer programming by using
[K / L / { / B]. Finally, press [OK] again.
E29
Disc protected
Already 254 chapters
recorded
E30
Disc full
Copy prohibited
program
E35
E36
PCA full
It is impossible to
record additionally
on a disc recorded
by other units when
setting “Replace Disc
Menu” to “OFF”.
5) Press [TIMER] to exit.
Already finalized
video format disc
6) Press [TIMER SET] to return to the timer standby
mode.
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
To stop the timer recording in process
Press [STOP C] to stop the disc recording or
[STOP C/EJECT A] to stop the cassette tape recording
on the front panel of the unit.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed and
asterisked in the timer programming list.
[STOP C] on the remote control is not effective.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
Note
• Press [TIMER] to check the timer recording in
progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
EN 39
E9C80UD.indd 39
2006/12/19 14:03:15
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged
for more than 30 seconds, the clock setting and all timer
programming will be lost.
recording under such condition, cancel timer recording by
pressing [TIMER SET] during timer standby or stop
recording by pressing [STOP C] on the front panel during
timer recording.
• If a disc is not inserted, "DVD" on the front panel display
flashes and timer recording cannot be performed. In some
• To cancel the timer standby mode, press [TIMER SET].
cases,
will appear momentarily around the start point as
• When the starting and the ending time are the same, the
length of the recording will be set for 24 hours. When the disc
or cassette tape becomes full during the recording, the unit
turns itself off.
• When the programmed starting and ending time are earlier
than the current time, the setting will not be accepted and
be cleared for redoing.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after you
turn the power off.
• The timer recording for digital TV cannot record any audio
language other than English.
• The timer recording cannot be performed in DVD and VCR
at the same time. If you set two programming with the
same channel and time in both devices, the program with a
lower program number will be recorded.
the unit attempts to record. Please insert a recordable disc.
• If a cassette tape with a erase-protection tab is not in the
cassette compartment or there is no cassette tape in the
cassette compartment, “VCR” on the front panel display
flashes and timer recording cannot be performed. Please
insert a recordable cassette tape.
• If you press [TIMER SET] and turn on the unit while either
DVD or VCR is in timer standby mode,
disappears. In this
case, you cannot change the mode between DVD and VCR.
You cannot change any settings using [SETUP] or edit discs.
• When all the timer recording is completed,
flashes. To
play back or eject the recorded disc, press [TIMER SET] first,
then select the recorded title and press [PLAY B], or
[OPEN/CLOSE A] to remove the disc.
• If both DVD and VCR are timer programmed, you cannot
use any functions for either unit during timer standby or
timer recording. If you want to use functions other than
The Priority of Overlapped Settings
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
When some programming have been made at
the end time of the programming currently
being recorded:
A program set previously (PROG. A) has priority.
A program set previously (PROG. B) has priority.
PROG. A
PROG. A
PROG. B
PROG. B
PROG. C
actual
recording
actual
recording
PROG. A
PROG. A
PROG. B
PROG. B
The first 2 minutes (at the longest) will be cut off.
The first 2 minutes (at the longest) will be cut off.
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
When the recording time is entirely overlapped:
PROG.A will not be recorded.
PROG. A
PROG. A
PROG. B
actual
recording
PROG. B
actual
recording
PROG. B
PROG.B
PROG.A
The first 2 minutes (at the longest) will be cut off.
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
If PROG. A is a DVD recording program, the
beginning of the PROG. B may be cut off.
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 1 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
40 EN
E9C80UD.indd 40
2006/12/19 14:03:16
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Overwriting from the Beginning of
the Title
Overwriting in the Middle of the Title
You can overwrite the existing title from the selected
position.
You can overwrite the existing title from the beginning.
1) Press [STANDBY-ON y].
Make sure that the TV input is set on the unit.
1) Follow the steps 1 and 2 on the left.
2) Use [K / L] to select a title to be overwritten, then
2) Load the disc that includes a title to be overwritten.
press [OK].
It takes a while to display
the title list.
3) Use [K / L] to select “Play”, then press [OK].
Playback will start.
Title list will appear.
If the title list does not appear, press [TITLE].
4) Press [PAUSE F] at the point from which you want
to start overwriting.
3) Press [REC MODE] to select a recording mode.
Refer to “Recording Mode” on page 33.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
5) Press [REC I].
“F I”, display menu, channel, and the time lapse will
be displayed as illustrated on the left.
1
SP (2Hr)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
6) Select the channel you want to record.
(Refer to page 27 on how to select a channel.)
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
7) Press [REC I] again.
Overwriting recording starts.
EMPTY TITLE
1:37:52 SP(2Hr)
8) Press [STOP C] to stop recording.
Title name is not overwritten.
5) Use [K / L] to select “Overwrite”, then press [OK].
1
SP (2Hr)
This operation may take a
while to be completed.
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
6) Select the channel you want to record.
(Refer to page 27 on how to select a channel.)
Note
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
selected title number
to be overwritten
1
1
0:00:00
DVD+RW
CH 12
SP(2Hr)
2:00
F
I
7) Press [REC I].
Overwriting recording starts.
The elapsed-time counter starts running.
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Note
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
EN 41
E9C80UD.indd 41
2007/01/16 18:58:12
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion,
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B
title name : A
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
existing title : C
title name : A
title name : C
When overwriting in the middle of the title:
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B*
title name : B
Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
*
Note
• When a title name is overwritten, its thumbnail is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.
42 EN
E9C80UD.indd 42
2006/12/19 14:03:16
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Connect the external device properly to the unit by using input jacks either E2 (front) or E1 (rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (front).
Use S-video or the RCA audio/video cables for this connection.
or
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
R
L
R
L
external device
(camcorder, VCR etc.)
S-video
cable
RCA
RCA
RCA
S-video
cable
RCA
or
video
cable
audio
cable
video
cable
or
audio cable
DVD
AUDIO
OUT
DVD/VCR
IN ---AUDIO---OUT
DIGITAL
AUDIO OUT
S-VDEO COMPONENT S-VIDEO
VIDEO OUT
Y
PB
L
or
OUT
IN
/CB
COAXIAL
IN ---VIDEO---OUT
PR
R
E2
E1
to E2 IN
to E1 IN
OUT
IN
DVD/VCR
IN ---AUDIO---OUT
D
AUDIO
S-VIDEO
L
L
ANTENNA
/C
L
R
R
IN
COAXIAL
IN ---VIDEO---OUT
/
R
front of this unit
rear of this unit
Use [K / L] to select “Required
Settings”, then press [OK].
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
2
3
4
Use [K / L] to select “Video Input”,
then press [OK].
STANDBY-ON
Use [K / L] to select desired external
input position, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
VCR DVD
Video Input
1
GHI
4
2
JKL
5
3
MNO
6
E1 (Rear)
E2 (Front)
Video In
Video In
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select “Video
In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
.
0
DISC MENU
SETUP
o
5
s
B
OK
p
TITLE
RETURN
Video Input - E2 (Front)
VCR DVD
Video In
j
i
B
S-Video In
Press [SETUP].
Press [SETUP] to exit.
1
6
EN 43
E9C80UD.indd 43
2006/12/19 14:03:16
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 43.
Turn on the TV and press
[STANDBY-ON y], and be sure to
select the input of the TV to which
the unit is connected.
1
2
STANDBY-ON
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
CLEAR
It takes a while to load
the disc.
SPACE
.
0
When you want to record to a
cassette tape:
DISC MENU
SETUP
o
Press [VCR].
s
B
OK
p
TITLE
RETURN
Insert the cassette tape with a erase-
protection tab into the cassette
compartment.
j
F
i
B
h
g
C
Select the input of the unit which the
external device is connected. (E1 or E2)
CHANNEL
--
+
• To use the input jacks on the rear of this unit;
3
Select “E1 (Rear)” position by using [SOURCE]
REC MODE VCR
DVD
TIMER
AUDIO
or [CHANNEL
/
].
REC
• To use the input jacks on the front of this unit;
I
Select “E2 (Front)” position by using [SOURCE]
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
or [CHANNEL
/
].
• You can also select external input position by
SEARCH
using [the Number buttons].
e.g.) For E1, press [0], [0], [1].
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 33 for DVD
or “Recording” on page 87 for VCR.
4
5
6
7
1
7 5
Press [RECORD I] (DVD or VCR) on
the unit to start recording.
Start playback on the external device
to record from.
For disc:
2
7 5
Press [STOP C] on the unit to stop
recording.
For cassette tape:
Press [STOP C/EJECT A] on the unit
to stop recording.
This operation may take a
while to be completed.
44 EN
E9C80UD.indd 44
2006/12/19 14:03:17
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “Disc Edit” menu.
Press [SETUP].
1
2
3
STANDBY-ON
Use [K / L] to select “Disc Edit”, then
press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
PQRS
TUV
WXYZ
7
8
9
Disc Edit
SPACE
CLEAR
Edit Disc Name
.
0
Disc Protect OFF ON
Erase Disc
DISC MENU
SETUP
o
Make Edits Compatible
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select “Yes”, then press
h
g
C
[OK].
CHANNEL
4
Disc Protect OFF ON
--
+
Yes
No
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
A disc will be protected.
This operation may take a
while to be completed.
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON”.
Disc Protect ON OFF
Yes
No
To release the protect for the disc, select “Yes” at step 4.
EN 45
E9C80UD.indd 45
2006/12/19 14:03:17
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize discs to play back in other DVD
players.
1
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a
Use [K / L] to select “Disc Edit”, then
press [OK].
“Disc Edit” menu will appear.
longer time period for finalization. Do not unplug the
power cord during finalization.
2
Use [K / L] to select “Finalize”, then
press [OK].
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
3
4
A
ABC
DEF
Use [K / L] to select “Yes”, then press
[OK].
1
GHI
4
2
JKL
5
3
MNO
6
Finalize
PQRS
TUV
WXYZ
Yes
No
7
8
9
SPACE
CLEAR
.
0
Finalizing will start.
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Finalizing
90%
j
F
i
B
To cancel finalizing...
(DVD-RW only)
h
g
C
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [{ / B], then press [OK]. Finalizing is
canceled and the unit will be in stop mode.
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
Do you want to cancel ?
Yes No
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Finalizing
5%
• If
appears when pressing [STOP C], you cannot
Note
cancel finalizing because the finalizing has been in
certain progress.
• Once you have finalized a DVD+R/DVD-R, you cannot
edit or record anything on that disc.
• When selecting “No” and press [OK] or [RETURN],
finalizing will be continued.
• There is no need to finalize DVD+RW.
• You cannot cancel finalizing the DVD+R/DVD-R once
it has started.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
Disc Edit
This operation may take a
while to be completed.
Edit Disc Name
Disc Protect OFF ON
Erase Disc
Undo Finalize
Finalizing is completed.
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT power off during finalization, this will result
in malfunction.
5
46 EN
E9C80UD.indd 46
2006/12/19 14:03:17
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP].
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
1
2
3
4
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
STANDBY-ON
Use [K / L] to select “Auto Finalize”,
then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
PQRS
TUV
WXYZ
DVD
Auto Finalize
7
8
9
Disc Full
End of Timer Rec
OFF
OFF
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select “ON”, then press
[OK].
h
g
C
5
Auto Finalize - Disc Full
DVD
CHANNEL
--
+
ON
OFF
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Auto Finalize - End of Timer Rec
DVD
ON
OFF
Your setting will be activated.
Press [SETUP] to exit.
6
EN 47
E9C80UD.indd 47
2006/12/19 14:03:18
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING MODE
Press [SETUP].
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the
DVD or the cassette tape is not copy protected.
Before starting this function, prepare for the recording on the
DVD+RW/+R, DVD-RW/-R or the cassette tape. Refer to pages
35 and 87.
1
2
3
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
Make sure:
• Insert a recordable disc and a cassette tape with a erase-
protection tab.
Use [K / L] to select “Dubbing
Mode”, then press [OK].
Selection menu will appear.
Note for recording to a cassette tape:
• The cassette tape's erase-protection tab is intact.
• The remaining time of the cassette tape is long enough.
Note for recording to a disc:
• Make sure that the disc is recordable. Refer to page 33.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note for VCR to DVD duplication
• After starting VCR to DVD duplication, the picture
may be distorted because of the auto tracking
function.
This is not a malfunction. Be advised to playback the
cassette tape until the picture is stabilized, then set
the starting point which you wish to start recording,
and start VCR to DVD duplication.
48 EN
E9C80UD.indd 48
2006/12/19 14:03:19
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING MODE
VCR to DVD
DVD to VCR
Use [K / L] to select “VCR DVD”,
then press [OK].
Use [K / L] to select “DVD VCR”,
then press [OK].
4
4
Dubbing Mode
VCR DVD
Dubbing Mode
VCR DVD
VCR DVD
DVD VCR
VCR DVD
DVD VCR
Press [SETUP] to exit.
Press [VCR].
Press [SETUP] to exit.
Press [DVD].
5
6
5
6
7
8
9
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
Press [VCR].
Make sure to select a recording mode using
[REC MODE].
Press [DVD].
Make sure to select a recording mode using
Press [D.DUBBING].
DVD to VCR duplication will start.
[REC MODE].
7
8
9
Press [D.DUBBING].
VCR to DVD duplication will start.
Press [STOP C] to stop the recording.
• If you want to watch the duplicated material,
after the DVD to VCR duplication,
press [VCR] first then press [PLAY B].
Press [STOP C] to stop the recording.
• If you want to watch the duplicated material,
after the VCR to DVD duplication,
press [DVD] first then press [PLAY B].
Note
• When you turn off the unit after setting the dubbing mode to DVD VCR, the setting will be set to VCR DVD
automatically.
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
For Audio CD to VCR duplication:
• This function is available on Audio CD, not MP3 files.
For VCR to DVD duplication:
• The playback sound mode is followed by the setting of VCR playback sound mode on page 89. Set the playback
sound mode to which you wish to record to the DVD.
• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
• Dubbing indicator will light up on the front panel during dubbing.
EN 49
E9C80UD.indd 49
2006/12/19 14:03:19
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Before you play back DVD, read the following information.
Playable Discs and Files
Color Systems
DVD are recorded in different color systems throughout the
world. The most common color system is NTSC (which is
used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be recorded
in the NTSC system. You cannot play back DVD recorded in
other color systems.
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the requirements
for region codes and color systems as described below. You
can play back discs that have the following logos will play back
on the unit. Other disc types are not guaranteed to play back.
Playable discs
Logos
Region Codes
DVD-video
This unit has been designed to play back DVD with
region 1. DVD must be labeled for ALL regions or
for region 1 in order to play back on the unit. You
cannot play back DVD that are labeled for other
regions. Look for the symbols on the right on your
DVD. If these region symbols do not appear on your
DVD, you cannot play back the DVD in this unit.
DVD+RW
DVD+R
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on the
unit with the same region code.
DVD-RW
(Finalized video mode discs only)
PBC (playback control) for Video CD
You can select images or information on the menu screen by
activating the PBC (playback control) function of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
DVD-R
(Finalized video mode discs only)
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
Ver.2.0 (with PBC function): While using a video CD with PBC
function, “PBC” appears on the TV screen.
CD-DA (audio CD)
video CD
Note
• PBC setting turns to “ON” when loading video CD with
PBC function, thus, even after setting PBC to “OFF” and
ejecting the video CD then reloading the video CD, this
setting turns to “ON” automatically.
CD-RW
CD-R
• Some operations cannot be performed while PBC function
is on. Cancel PBC function temporarily to perform those
operations by following the instruction below.
1) Press [SETUP].
2) Use [K / L] to select “CD Playback Mode”, then press [OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
Playable files
Media
CD-DA
CD-RW/-R
You can play back interactive software using menu screens.
Refer to instructions in the video CD.
MP3
is a trademark of DVD Format/Logo Licensing Corporation.
Hint for DVD Playback
The contents of DVD are generally divided into titles. Titles
may be further subdivided into chapters.
Unplayable Discs
The following discs will not play back on this unit.
• CD-ROM
• DVD-RAM
• DVD-ROM
• Unfinalized disc
DVD-video
title 1
title 2
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• DVD-audio
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
• DVD contains MP3 and DVD or CD contains Windows
Media™ Audio/JPEG files
• DVD-R or DVD-RW recorded in VR mode or non compatible
recording format
audio CD, video CD
track 1
track 2
track 3
track 4
track 5
file 5
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD layer
cannot be heard.
MP3
file 3
folder 1
file 1
folder 2
file 4
file 2
50 EN
E9C80UD.indd 50
2006/12/19 14:03:19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
STANDBY-ON
1
2
Press [DVD].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Align the disc to
o
the disc tray guide.
s
B
OK
* Make sure the disc is compatible with this unit.
(Refer to page 50 for the list of compatible discs.)
TITLE
RETURN
p
B
j
F
i
Press [OPEN/CLOSE A] to close the
disc tray.
h
g
C
3
4
5
CHANNEL
It may take a while to load
the disc completely.
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Press [PLAY B] to start playback.
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
Refer to “Using the Title/Disc Menu” on page 55.
SEARCH
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 56.
Note
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 50).
EN 51
E9C80UD.indd 51
2006/12/19 14:03:20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
Press [STANDBY-ON y].
Turn on the TV and be sure to select the input to
which the unit is connected.
1
2
STANDBY-ON
Press [DVD].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
.
0
Align the disc to
DISC MENU
SETUP
o
the disc tray guide.
s
B
* Make sure the disc is compatible with this unit.
(Refer to page 50 for the list of compatible discs.)
OK
p
TITLE
RETURN
Press [OPEN/CLOSE A] to close the
disc tray.
j
F
i
B
h
g
C
3
It may take a while to load
the disc completely.
CHANNEL
--
+
Title list will appear automatically.
• To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 4.
• Press [B] to display the next page, and press [{] to
display the previous page.
52 EN
E9C80UD.indd 52
2006/12/19 14:03:20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Use [K / L] to select a desired title,
then press [OK].
Use [K / L] to select “Play”, then
press [OK].
4
5
6
1
SP (2Hr)
1
SP (2Hr)
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
3
EMPTY TITLE
1:37:52 SP(2Hr)
EMPTY TITLE
1:37:52 SP(2Hr)
• For Video CD, when “PBC (Video CD only)” in
“CD playback Mode” menu is set to “ON”, the
video CD main menu will appear when
inserting a disc. In such case, select a numbered
menu with [the Number buttons].
Playback will start.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 56.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
If you want to see disc information, press [{ ] when the
first page of the title list is displayed or press [ K ] when
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
e.g.) DVD+RW
No Disc Name
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
Needed
e.g.) DVD+R
No Disc Name
Disc
DVD+R
5
Total Titles
Disc Space Used
Disc Protect
Finalize
1:30:48
OFF
Finalized
1. Disc name
(Default “No Disc Name”)
2. Disc type
(DVD+RW/DVD+R/DVD-RW/DVD-R)
3. Total number of title
(include “EMPTY TITLE”)
4. Total time of recorded disc space
5. Status of disc protection
(“ON” is protected disc.)
6. Making edits compatible/finalize
• When DVD+RW is inserted:
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 78.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
EN 53
E9C80UD.indd 53
2006/12/19 14:03:21
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back a CD-RW/-R with MP3 Files
Follow steps 1 to 2 in “Direct
Playback” on page 51.
1
2
Press [OPEN/CLOSE A] to close the
disc tray.
It may take a while to load
the disc completely.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
File list will appear automatically.
• To exit the file list, press [STOP C].
• To resume the file list, press [TITLE].
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
Use [K / L] to select a desired folder
or file, then press [OK].
SPACE
CLEAR
.
0
3
File List
DISC MENU
SETUP
DISC NAME
o
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
s
B
OK
p
TITLE
RETURN
3
1 FILE NAME 1
3
2 FILE NAME 2
j
F
i
B
1/2
h
g
C
When selecting file:
Playback will start.
CHANNEL
--
+
When selecting the folder:
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for MP3 files:
• Folders are shown by
• MP3 files are shown by
.
3
.
• The system can recognize up to 255 folders and up to
999 files.
• The name of folder and file can be displayed in up to 29
characters. Unrecognizable characters will be replaced
with asterisks.
• If there are no files in the folder, “No Files” will be
displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<MP3>
• Sampling frequency
• Constant bit rate
Note
: 44.1 kHz or 48 kHz.
: 112 kbps - 320 kbps
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Files whose extension is other than “.mp3(MP3)” will
not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
54 EN
E9C80UD.indd 54
2006/12/19 14:03:21
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Using the Title / Disc Menu
Pause
Press [DVD] first.
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
Press [DVD] first.
1)Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
2)Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
F
3)Press [STOP C] to exit.
2)Press [PLAY B] to return to the normal playback.
Note
Note
• You can select a numbered menu with [the Number
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 84.)
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “CD
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
EN 55
E9C80UD.indd 55
2006/12/19 14:03:22
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Skipping TV Commercials During
Resume Playback
Playback
You can play back from where you stopped playing back
the disc last.
Press [DVD] first.
You can skip TV commercials to enjoy the recorded
programs without interrupting.
1)During playback, press [STOP C].
The resume message will appear.
Press [DVD] first.
During playback, press [CM SKIP].
Resume ON
Normal playback will start at 30 seconds ahead from the
point you press [CM SKIP].
Every time you press [CM SKIP], the searching point will
be extended by 30 seconds ahead.
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn off the unit.
You can press [CM SKIP] up to 6 times (180 seconds).
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
e.g.) Press [CM SKIP] once.
Note
• For MP3 files, playback will resume from the
beginning of the file at which playback was stopped.
• Some video CD with the PBC function resume
playback from the beginning of the track.
CM Skip 30 sec.
(forwarding 30 seconds)
Fast Forward / Fast Reverse Playback
Press [DVD] first.
1)During playback, press [FFW D] or [REW E].
Every time you press [FFW D] or [REW E],
approximate speed will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD) or files (for MP3 files) is not possible.
B
Playback will return to the normal playback.
g
h
g
h
g
h
g
h
g
h
g
h
normal
speed
40x
20x
5x
2x
20x
40x
playback
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at
8x with sound (indicated with
/
).
2)Press [PLAY B] to return to the normal playback.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
56 EN
E9C80UD.indd 56
2007/01/15 19:11:58
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Rapid Playback
Slow Forward / Slow Reverse Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
Press [DVD] first.
1)During playback, press [PAUSE F]. Then press
[FFW D] or [REW E].
Every time you press [FFW D] or [REW E],
approximate speed will be changed as follows. (The
sound will remain muted.)
Press [DVD] first.
1)During playback, press [RAPID PLAY].
g
h
g
h
g
h
g
h
g
h
g
h
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
Press [RAPID PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B
:
To return to the normal playback, press [PLAY B].
Note
Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B
:
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
Press [RAPID PLAY] 3 times to play back in
normal speed.
No effects.
B :
1/3x:
2)Press [PLAY B] to continue the normal playback.
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
Note
• Audio (language) setting cannot be changed while
using this mode.
• Only slow forward is available when playing back
video CD.
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
Step by Step Playback
Press [DVD] first.
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Press [NEXT G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [NEXT G] with the sound muted.
To play back step by step backward:
Press [PREV H] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [PREV H] / [NEXT G] to reverse/
advance continuously.
3)Press [PLAY B] to continue the normal playback.
Note
• Only step by step forward playback is available for
playing back video CD.
EN 57
E9C80UD.indd 57
2006/12/19 14:03:23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Zoom
Marker Setting
Press [DVD] first.
1)During playback, press [DISPLAY].
This feature allows you to assign a specific point on a disc
to be called back later.
2)Use [{ / B] to select
, then press [OK].
Press [DVD] first.
1)During playback, press [DISPLAY].
1
1
0:00:00
DVD-Video
2)Use [{ / B] to select
, then press [OK].
1
1
0:00:00
DVD-Video
3)Use [K / L] to select a desired zoom factor to zoom,
then press [OK].
1
1
0:00:00
DVD-Video
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
1.2
1.5
2.0
e.g.) DVD-video
1
1
0:00:00
DVD-Video
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
1
2
3
4
5
6
Zoom area will be displayed.
4)Use [K / L / { / B] to select a desired zoom
position, then press [OK].
e.g.) audio CD
1
0:00:00
Audio CD
1
2
3
4
5
6
The title (track) number and the time will be displayed.
Zoom playback will start.
4)To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [DISPLAY] again at
Note
step 1.
• To clear a marker, select the marker number to be
• To cancel the zoom function, select “x1.0” using
[K / L], then press [OK].
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning off the power
– Record on a recordable disc
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
58 EN
E9C80UD.indd 58
2006/12/19 14:03:24
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title / Chapter Search
Track Search
Using [PREV H] / [NEXT G]
Press [DVD] first.
Using [PREV H] / [NEXT G]
Press [DVD] first.
1)During playback, press [NEXT G] to skip the
current track/file and move to the next.
1)During playback, press [NEXT G] to skip the
current title or chapter and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [PREV H].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
To go back to the beginning of the current title or
chapter, press [PREV H].
Press it repeatedly to go to the previous title or
chapter. The title or chapter will move backward one
at a time.
Using [DISPLAY]
Press [DVD] first.
1)During playback, press [DISPLAY].
Using [DISPLAY]
2)Use [{ / B] to select
e.g.) audio CD
, then press [OK].
Press [DVD] first.
1)During playback, press [DISPLAY].
1
0:00:00
Audio CD
2)Use [{ / B] to select
, then press [OK].
1
1
0:00:00
DVD-Video
e.g.) MP3 files
1
0:00:00
MP3
The number next to
3)Title:
will be highlighted.
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [OK].
The number next to
will be highlighted.
3)Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[OK].
Title search will start.
Chapter:
Press [B] to move to the number next to
chapter.
for
After the search, playback will start automatically.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
Note
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
• Track search is not available when you play back the
video CD with PBC function.
After the search, playback will start automatically.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
01 /01
001/028
00:00:00/02:18:33
total time
of the disc
total number
of titles
total number
of chapters
EN 59
E9C80UD.indd 59
2006/12/19 14:03:25
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Time Search
Press [DVD] first.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1
1
0:00:00
DVD-Video
e.g.) audio CD
1
0:00:00
Audio CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [OK].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
60 EN
E9C80UD.indd 60
2006/12/19 14:03:26
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT / RANDOM / PROGRAM PLAYBACK
Repeat Playback
Random Playback
Available repeat function may vary depending the discs.
Press [DVD] first.
1)During playback, press [DISPLAY].
You can play back a disc randomly instead of playing
back in the original order.
Press [DVD] first.
1)Press [SETUP].
2)Use [{ / B] to select
, then press [OK].
1
1
0:00:00
DVD-Video
2)Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
3)Use [K / L] to select “Random Play”, then press
[OK].
3)Use [K / L] to select a desired option to repeat,
then press [OK].
e.g.) DVD-video
Random playback will start.
1
1
0:00:00
DVD-Video
Note
OFF
Title
• To cancel random playback, press [STOP C] twice
during random playback. “Playmode OFF” appears
on the TV screen.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
random playback.
Chapter
A - B
e.g.) audio CD, video CD
1
0:00:00
Audio CD
OFF
Track
All
A-B
e.g.) MP3 files
1
0:00:00
MP3
OFF
Track
All
Group
The selected repeat playback will start.
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Note
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random
playback of MP3 files.
• Repeat playback is not available when you play back
the video CD with PBC function.
EN 61
E9C80UD.indd 61
2006/12/19 14:03:26
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT / RANDOM / PROGRAM PLAYBACK
Program Playback
You can program the disc to play back in your desired
order.
Press [DVD] first.
1)Press [SETUP].
2)Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
3)Use [K / L] to select “Program Play”, then press
[OK].
4)Use [K / L] to select a desired track, then press [OK]
or [B].
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:00:00
Repeat this step until you program all the desired
tracks.
5)Press [PLAY B].
Program Play
09 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:06:11
Program playback will start.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “Playmode OFF” appears
on the TV screen.
• You may also select a desired track using [the
Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
program playback.
62 EN
E9C80UD.indd 62
2006/12/19 14:03:26
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD or audio CD, you can switch
“L/R”(stereo), “L”(left) or “R”(right).
Press [DVD] first.
Press [DVD] first.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
e.g.) DVD-video
, then press [OK].
2)Use [{ / B] to select
, then press [OK].
1
1
0:00:00
DVD-Video
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
1
1
0:00:00
DVD-Video
3)Use [K / L] to select a desired subtitle language,
then press [OK].
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch French
1
1
0:00:00
DVD-Video
For audio CD, video CD
• Audio channel will switch.
e.g.) audio CD
OFF
1.English
2.French
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
1
0:00:00
Audio CD
1. L/R
2. L
3. R
Note
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
Note
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 95.
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
EN 63
E9C80UD.indd 63
2006/12/19 14:03:26
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
Press [DVD] first.
1)During playback, press [DISPLAY].
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
Press [DVD] first.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK].
2)Use [{ / B] to select
, then press [OK].
1
1
0:00:00
DVD-Video
1
1
0:00:00
DVD-Video
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [OK].
e.g.) DVD-video
Angle icon appears when a switching camera angle is
available.
1
1
0:00:00
DVD-Video
DVD+RW
Audio CD
OFF
Type 1
Type 2
Angle will switch each time you press [OK].
Note
e.g.) DVD+RW
• Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Display” menu.
Refer to page 86.
1
1
0:00:00
OFF
Type 1
Type 2
Reducing Block Noise
e.g.) audio CD, MP3 files
1
1
0:00:00
OFF
Type 1
Type 2
Press [DVD] first.
1)During playback, press [DISPLAY].
OFF
: no effect
2)Use [{ / B] to select
, then press [OK].
Type 1 : natural effect
Type 2 : emphasized effect
1
1
0:00:00
DVD-Video
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept to “OFF” when the unit is
turned off.
3)Use [K / L] to select a desired option, then press
[OK].
1
1
0:00:00
DVD-Video
OFF
Type 1
Type 2
Your setting will be activated.
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.
64 EN
E9C80UD.indd 64
2006/12/19 14:03:27
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DISC EDITING
Guide to a Title List
Editing Discs
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
You can edit discs for the following items. Be sure that
once you edit titles, they will not remain as original.
• Deleting Titles (Refer to page 66.)
• Putting Names on Titles (Refer to page 67.)
• Setting Chapter Marks (Refer to page 68.)
• Clearing Chapter Marks (Refer to pages 69-70.)
• Hiding Chapters (Refer to page 71.)
Press [TITLE].
1
1
SP (2Hr)
• Setting Pictures for Thumbnails (Refer to page 72.)
• Dividing a Title (DVD+RW/DVD-RW only) (Refer to page 73.)
• Putting Name on Disc (Refer to page 74.)
• Setting or Releasing Disc Protect (Refer to pages 75-76.)
• Erasing Disc (Refer to page 77.)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
Play
Edit
Overwrite
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
• Making Edits Compatible (Refer to page 78.)
6
Note
• When selecting “Edit” on pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc.
Edit
Title Delete
2
Edit Title Name
• The capacity indicator in the right side of the title list
may not indicate the precise capacity in the disc.
• The capacity indicator may not indicate the capacity
for the titles of which recording time is short.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
Chapter Mark
Current Chapter
Index Picture
Title Dividing
NOV/22/07 11:35AM CH13 EP
0:00:59
11 10
9
8
7
1. Title list: List of the titles recorded on the disc, and
their information.
2. Arrow: Indicating there is a previous / next page.
3. Title information: On the first line, title name
(editable) is displayed. On the second line, the length
of the title is displayed.
Empty title: The portion of the disc where there is no
recordings are made. As for the empty title, available
recording time by the selected recording mode is
displayed on the second line.
4. Recording mode: Currently selected recording mode
is displayed here.
5. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
6. Thumbnails: A cut from the recorded content is
displayed here.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
mode are displayed here.
9. Progress bar: Indicating the progress of the
playback.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [STOP C] to exit the title list.
EN 65
E9C80UD.indd 65
2006/12/19 14:03:28
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting Titles
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
For DVD+RW/DVD-RW, when the last recorded title in the
title list is deleted, the available disc space to record on
will be increased. For DVD+R/DVD-R, the disc space to
record on will not be changed.
Use [K / L] to select “Edit”, then
press [OK].
3
4
5
SP (2Hr)
1
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
SPACE
CLEAR
SETUP
EMPTY TITLE
1:37:52 SP(2Hr)
.
0
DISC MENU
o
Use [K / L] to select “Title Delete”,
then press [OK].
s
B
OK
p
TITLE
RETURN
Edit
Title Delete
1
j
F
i
B
Edit Title Name
Chapter Mark
Current Chapter
Index Picture
Title Dividing
h
g
C
CHANNEL
--
+
NOV/21/07 11:00AM CH12 SP
0:00:59
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
Use [K / L] to select “Yes”, then press
[OK].
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Title Delete
Yes
1
No
Press [DVD] first.
Press [TITLE].
NOV/21/07 11:00AM CH12 SP
0:00:59
1
2
After that, “Are you sure?” will appear, select
“Yes” and then press [OK].
Title will be deleted.
Data will be written onto the disc momentarily.
Use [K / L] to select a desired title,
then press [OK].
Writing to Disc
90%
SP (2Hr)
1
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
This operation may take a
while to be completed.
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
After editing is complete, the title list will appear.
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
1
EMPTY TITLE
0:21:14 SP(2Hr)
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
Note
3
• Deleted part of the titles in the capacity indicator
changes in color.
EMPTY TITLE
1:37:52 SP(2Hr)
• If you delete the title, deleted title will be displayed as
“EMPTY TITLE”. However, if the deleted title was less
than 3 minutes, it will be disappeared from the title list.
66 EN
E9C80UD.indd 66
2006/12/19 14:03:28
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles
You can put title names on the titles and change the
names from this menu.
Use [K / L] to select “Yes”, then press
[OK].
4
5
STANDBY-ON
Edit Title Name
Yes
6
No
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
MY FAVORITE
0:00:59
PQRS
TUV
WXYZ
The name you entered will be activated for the title.
7
8
9
CLEAR
SPACE
.
0
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc momentarily.
DISC MENU
SETUP
o
s
B
This operation may take a
while to be completed.
OK
p
TITLE
RETURN
j
i
B
Guide to Edit Title Name
1)Use [K / L] to select a desired character set, then
press [OK].
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
Select
ABC
abc
123
@ ! ?
1
2
Press
0
<space>
<space>
<space>
0
Use [K / L] to select “Edit Title
Name”, then press [OK].
! ”# $ % & ’( )
+ , - . / : ; < = >
1
*
(*1)
(*1)
1
? @ [ ] ^ _ { | }
Edit
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
Title Delete
1
Edit Title Name
Chapter Mark
Current Chapter
Index Picture
Title Dividing
GHI
ghi
JKL
jkl
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
NOV/21/07 11:00AM CH12 SP
0:00:59
wxyz
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on this page.
1
*1 Press
, character set will be changed to the “ @!? ”
mode automatically.
3
2
9
*2 Press
to
, character set will be changed to the
Edit Title Name
previous input mode automatically.
• To delete letters, press [CLEAR] repeatedly.
A
a
B
b
2
!
C
c
3
?
6
character set
Holding [CLEAR] to delete all letters.
1
• Use [s / B] to move the cursor to the left and right.
@
• You can enter up to 30 letters.
M
Note
0:00:59
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
area for entering title names
When you finish entering a title name, press [OK].
EN 67
E9C80UD.indd 67
2006/12/19 14:03:29
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Chapter Marks
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
1
2
3
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Press [PLAY B] and then [PAUSE F]
to decide the point at which you will
create a new chapter mark.
• It is convenient to use [PREV H], [NEXT
G],[E] and [D] for finding the point to
add a new chapter mark.
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Add”, then press
o
[OK].
4
s
B
OK
p
Chapter Mark
TITLE
RETURN
Add
1
Delete
Delete All
Chapter
2/
2
j
F
i
B
h
g
C
NOV/21/07 11:00AM CH12 SP
CHANNEL
0:00:59
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Use [K / L] to select “Yes”, then press
REC
[OK].
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
5
Chapter Mark
-
Add
Yes
No
1
SEARCH
Chapter
2/
2
F
NOV/21/07 11:00AM CH12 SP
0:00:59
A new chapter mark will be added.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• When the number of chapter marks in a title is 99
and the number of chapter marks in a disc is 254,
chapter marks cannot be added.
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
68 EN
E9C80UD.indd 68
2006/12/19 14:03:29
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
STANDBY-ON
1
2
3
4
5
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [PREV H] / [NEXT G] to select
a chapter mark to be deleted.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Delete”, then
press [OK].
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
Chapter Mark
-
Delete
h
g
C
Yes
No
1
CHANNEL
--
+
Chapter
2/
2
REC MODE VCR
DVD
TIMER
AUDIO
F
REC
NOV/21/07 11:00AM CH12 SP
I
0:00:59
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
The selected chapter mark will be deleted.
SEARCH
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
EN 69
E9C80UD.indd 69
2006/12/19 14:03:30
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks (cont’d)
To delete all chapter marks:
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
STANDBY-ON
1
2
3
4
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
Use [K / L] to select “Delete All”,
then press [OK].
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Yes”, then press
[OK].
s
B
OK
p
TITLE
RETURN
Chapter Mark
-
Delete All
Yes
No
1
j
F
i
B
Chapter
2/
2
h
g
C
F
CHANNEL
--
+
NOV/21/07 11:00AM CH12 SP
0:00:59
REC MODE VCR
DVD
TIMER
AUDIO
REC
Use [K / L] to select “Yes”, then press
[OK].
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
5
6
Chapter Mark
-
Delete All
SEARCH
Are you sure?
Yes
1
No
Chapter
2/
2
NOV/21/07 11:00AM CH12 SP
0:00:59
All chapter marks will be deleted.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
70 EN
E9C80UD.indd 70
2006/12/19 14:03:30
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
1
2
3
4
STANDBY-ON
Use [K / L] to select “Current
Chapter”, then press [OK].
Submenu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [PREV H] / [NEXT G] to decide
the chapter to be hidden.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Use [K / L] to select “Hidden”, then
press [OK].
.
0
DISC MENU
SETUP
o
Current Chapter
Visible
1
s
B
OK
p
Hidden
TITLE
RETURN
Chapter
2/
2
Visible
j
F
i
B
NOV/21/07 11:00AM CH12 SP
h
g
C
0:00:59
CHANNEL
--
+
After this operation is completed,
press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
REC MODE VCR
DVD
TIMER
AUDIO
REC
5
I
TIMER
This operation may take a
while to be completed.
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at the step 4 on this
page.
Data will be written onto the disc momentarily.
After that, title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
SP (2Hr)
1
Hidden
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
EN 71
E9C80UD.indd 71
2006/12/19 14:03:31
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Pictures for Thumbnails
You can set your desired scene as a thumbnail for each
title.
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
1
2
Use [PREV H], [NEXT G], [E],
[D], [PAUSE F] and [PLAY B] to
decide the picture you want to select
as a thumbnail.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Index Picture”,
then press [OK].
PQRS
TUV
WXYZ
3
7
8
9
SPACE
CLEAR
Use [K / L] to select “Yes”, then press
[OK].
.
0
DISC MENU
SETUP
o
4
Index Picture
1
Yes
No
s
B
OK
p
TITLE
RETURN
F
j
F
i
B
NOV/21/07 11:00AM CH12 SP
h
g
C
0:00:59
CHANNEL
A picture for thumbnail will be set.
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Press [RETURN] to exit.
Data will be written onto the disc momentarily.
REC
I
5
TIMER
This operation may take a
while to be completed.
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• If the selected picture for a thumbnail is overwritten,
the index picture is reset to the first scene of the title.
72 EN
E9C80UD.indd 72
2006/12/19 14:03:31
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Dividing a Title
Follow steps 1 to 3 in “Deleting
Titles” on page 66 to display “Edit”
menu.
You can divide one title into 2 new titles.
1
2
Use [PREV H], [NEXT G], [E],
[D], [PAUSE F] and [PLAY B] to
decide the point at which you will
divide the title.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Title Dividing”,
then press [OK].
3
PQRS
TUV
WXYZ
7
8
9
Use [K / L] to select “Yes”, then press
[OK].
SPACE
CLEAR
.
0
DISC MENU
SETUP
4
Title Dividing
o
1
Yes
No
s
B
OK
p
TITLE
RETURN
F
j
F
i
B
NOV/21/07 11:00AM CH12 SP
0:00:59
h
g
C
The title will be divided into 2 new titles.
Both title names are identical, and index pictures
are reset to the first scene at this point.
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Data will be written onto the disc momentarily.
REC
I
TIMER
This operation may take a
while to be completed.
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
49, and the number of recording chapters reaches
the maximum of 254.
EN 73
E9C80UD.indd 73
2006/12/19 14:03:31
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Name on Disc
You can put a name on the disc and change it from this
menu.
Press [STOP C] if you are playing back a disc.
Press [DVD] first.
Press [SETUP].
1
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Disc Edit”, then
press [OK].
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
Use [K / L] to select “Edit Disc
PQRS
TUV
WXYZ
Name”, then press [OK].
7
8
9
SPACE
CLEAR
e.g.) DVD+RW
3
.
0
Disc Edit
DISC MENU
SETUP
Edit Disc Name
o
Disc Protect OFF
Erase Disc
ON
Make Edits Compatible
s
B
OK
p
TITLE
RETURN
A window for entering a title name will appear.
Edit Disc Name
j
F
i
B
A
a
B
b
2
!
C
c
3
?
No Disc Name
h
g
C
1
Disc
DVD+RW
3
@
Total Titles
Disc Space Used
Disc Protect
0:30:48
OFF
CHANNEL
Make Edits Compatible
Needed
--
+
REC MODE VCR
DVD
TIMER
AUDIO
0:00:00
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
67.
SEARCH
4
5
When you finish entering a title name, press
[OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit Disc Name
Yes
No
No Disc Name
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
Needed
MY FAVORITE DISC
0:00:00
The name you entered will be activated for the title.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
74 EN
E9C80UD.indd 74
2006/12/19 14:03:31
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Releasing Disc Protect
To prevent accidental editing, or erasing the titles, you
can protect them.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 74 to display “Disc
Edit” menu.
1
2
STANDBY-ON
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Disc Edit
ABC
DEF
Edit Disc Name
1
GHI
4
2
JKL
5
3
MNO
6
Disc Protect OFF
Erase Disc
ON
Make Edits Compatible
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Yes”, then press
[OK].
s
B
OK
p
TITLE
RETURN
3
Disc Protect OFF
ON
Yes
No
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Data will be written onto the disc momentarily.
REC
I
This operation may take a
while to be completed.
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
EN 75
E9C80UD.indd 75
2006/12/19 14:03:32
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Releasing Disc Protect (cont’d)
Releasing disc from protect:
STANDBY-ON
Follow steps 1 to 2 in “Putting Name
on Disc” on page 74 to display “Disc
Edit” menu.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
1
2
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Disc Protect ON
OFF”, then press [OK].
e.g.) DVD+RW
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Disc Edit
.
0
Edit Disc Name
DISC MENU
SETUP
Disc Protect ON
Erase Disc
OFF
o
Make Edits Compatible
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select “Yes”, then press
[OK].
h
g
C
CHANNEL
--
+
3
Disc Protect ON
OFF
REC MODE VCR
DVD
TIMER
AUDIO
Yes
No
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
76 EN
E9C80UD.indd 76
2006/12/19 14:03:32
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Erasing Disc
Press [STOP C] if you are playing back a disc.
You can erase all titles on a disc.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 74 to display “Disc
Edit” menu.
STANDBY-ON
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Erase Disc”,
then press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Disc Edit
Edit Disc Name
PQRS
TUV
WXYZ
Disc Protect OFF
Erase Disc
ON
7
8
9
Make Edits Compatible
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
3
Erase Disc
h
g
C
Yes
No
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
Data will be written onto the disc momentarily.
SEARCH
This operation may take a
while to be completed.
Note
• When you select “Yes” at step 3, all contents of the
disc will be erased.
EN 77
E9C80UD.indd 77
2006/12/19 14:03:33
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Making Edits Compatible
Press [STOP C] if you are playing back a disc.
If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
see those effects on other unit.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 74 to display “Disc
1
2
Edit” menu.
STANDBY-ON
Use [K / L] to select “Make Edits
Compatible”, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Disc Edit
1
GHI
4
2
JKL
5
3
MNO
6
Edit Disc Name
Disc Protect OFF
Erase Disc
ON
Make Edits Compatible
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Yes”, then press
[OK].
s
B
OK
p
TITLE
RETURN
3
Make Edits Compatible
Yes
No
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
Data will be written onto the disc momentarily.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
This operation may take a
while to be completed.
SEARCH
78 EN
E9C80UD.indd 78
2006/12/19 14:03:33
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTING
The following table is the contents which you can set and the default setting.
Refer to the following table for useful operation.
Setup
Video Input
Page 43
Items (highlight is the default)
Contents
E1 (Rear)
Set the video input type for the external input.
Video In
S-Video In
E2(Front)
Video In
S-Video In
TV Aspect
Page 81
Set a picture size according to aspect ratio of your
TV screen.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
TV Audio Select
CC Style
Page 29
DTV CC
Set the analog TV audio type for output and
recording.
Stereo
SAP
Set the type of the DTV closed caption.
OFF
Service 1
Service 2
Page 30
User Setting
Page 31
Set whether or not CC style setting is effective.
Set font size of the displayed caption.
OFF
ON
Font Size
Page 32
Middle
Large
Small
Font Style
Page 32
Set font style of the displayed caption.
Set edge type of the displayed caption.
Style 1
Style 2
Style 3
Edge Type
Page 32
NONE
Raised
Depressed
Font Opacity
Page 32
Set font opacity of the displayed caption.
Set font color of the displayed caption.
Solid
Translucent
Flash
Transparent
White
Black
Font Color
Page 32
Back Opacity
Page 32
Set back opacity of the displayed caption.
Set back color of the displayed caption.
Solid
Translucent
Flash
Transparent
White
Back Color
Page 32
Black
Set the downloadable rating.
V-Chip0 0
Page 81
Downloadable Rating
Change Password
Disc Audio
Digital Out
Page 83
PCM
Set whether the sound recorded in 96kHz will be
down sampled in 48kHz.
48kHz
96kHz
Dolby Digital
PCM
Set the type of sound signal which outputs from the
digital audio output jack.
Stream
Dynamic Range Control
Page 83
Compressing the range of sound volume.
ON
OFF
Video
Progressive Scan
Page 83
ON
OFF
Set to the progressive scan mode (set to “ON”) or to
the interlace scan mode (set to “OFF”).
Still Mode
Page 84
Set the type of still image in pausing playback.
Auto
Field
Frame
EN 79
E9C80UD.indd 79
2007/02/07 15:26:41
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTING
Setup
Language
Items (highlight is the default)
Disc Menu
Page 84
Contents
Set the language for disc menu.
English
French
Spanish
Other
Audio
Page 84
Set the language for audio.
Original
English
French
Subtitle
Page 84
Set the language for subtitles.
OFF
English
French
Parental Lock
Page 85
Page 86
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
OSD Language
Set the language for OSD (on-screen display).
English
Français
Español
Angle Icon
Page 86
Page 86
Set whether or not to display the angle icon.
Set the idling time before the screen saver starts.
ON
OFF
OFF
5 minutes
10 minutes
Screen Saver
FL Dimmer
Page 86
Auto
Bright
Dark
OFF
5 minutes
Set the brightness of the front panel display.
Insert chapter marks every set time interval.
Auto Chapter
Page 34
10 minutes
Auto Finalize
Page 47
Disc Full
ON
OFF
Set the unit to finalize the disc automatically.
Set the VCR to DVD duplication.
End of Timer Rec
Page 49
ON
OFF
Dubbing Mode
VCR DVD
DVD VCR
Replace Disc Menu
Page 34
ON
OFF
Make the discs recorded on other unit recordable
on this unit.
Clock Setting
Auto Clock Setting
Page 26
Page 25
Set the clock.
Tune the clock setting automatically.
OFF
Auto
Manual
Daylight Saving Time
Auto Channel Preset
Manual Channel Preset
Page 26
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
ON (MAR-NOV)
ON (APR-OCT)
OFF
Page 22
Antenna
Cable (Analog)
Cable (Analog/Digital)
Pages 23-24
Note
• Your change to each settings stays on even when the power is switched off.
• An item which is not currently available is grayed in the settings.
80 EN
E9C80UD.indd 80
2006/12/19 14:03:34
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Required Setting
Press [STOP C] if you are playing back a disc.
V-Chip
2
You can set the viewing limitation for the digital TV
programs to prevent your children from watching
inappropriate programs.
This feature is available only after the digital TV
ratings have been downloaded.
• The ratings can be downloaded by the unit
automatically if it is available in your area.
1) Use [the Number buttons] to enter the access
password.
Press [SETUP].
1
Use [K / L] to select “Required
Settings”, then press [OK].
2
Use [K / L] to select a desired item,
If you have not set the password, first, use [the Number
buttons] to set the access password, then press [OK].
The number you entered will be stored as the access
then press [OK].
3
VCR DVD
Required Settings
password.
Video Input
3
1
4
5
2
Password Input
TV Aspect
TV Audio Select
CC Style
4:3 Letter Box
Stereo
2) Use [K / L] to select a desired item, then press [OK].
V-Chip
V-Chip
VCR DVD
Submenu will appear.
Downloadable Rating
Change Password
Refer to
the selected item.
to
on this page and set
1
2
Downloadable Rating
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
4
5
• For
• For
• For
refer to page 43.
3
4
5
refer to page 29.
refer to page 30-32.
When you finish with setting, press
[SETUP] to exit.
Downloadable Rating is currently not available.
• This message will also appear when you try to access
“DOWNLOADABLE RATING” after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
To set the rating:
Use [K / L] to select “BLOCK SETTING” then press [OK]
to show the various types of ratings. Use [K / L] to
select a desired rating to set, then press [OK] to show
the levels for the rating. Use [K / L] to select a level,
then press [OK] to switch “VIEW” or “BLOCK”. If you set
one level to “BLOCK”, all the higher levels will be turned
to “BLOCK” automatically.
To clear the downloadable rating information and its
setting:
Use [K / L] to select “CLEAR DOWNLOADABLE
RATING”, then press [OK].
TV Aspect (Default: 4:3 Letter Box)
1
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [OK].
Change Password
Change the current password.
Use [the Number Buttons] to enter new access
password.
TV Aspect
DVD
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
Note
• When you forget the access password at step 1),
enter 4,7,3,7 using [the Number buttons] in the
password input window. Password will be cleared.
• Depending on the type of rating system, you may set
the levels individually.
EN 81
E9C80UD.indd 81
2007/02/09 10:34:21
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback
Press [STOP C] if you are playing back a disc.
STANDBY-ON
Press [SETUP].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
1
2
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Playback”, then
press [OK].
PQRS
TUV
WXYZ
Setup
7
8
9
CLEAR
Required Settings
Playback
Display
SPACE
.
0
DISC MENU
SETUP
Recording
Clock
o
Channel
Disc Edit
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select a desired item,
then press [OK].
h
g
C
3
CHANNEL
Playback
DVD
--
+
Disc Audio
Video
1
2
3
4
REC MODE VCR
DVD
TIMER
AUDIO
Language
Parental Lock
OFF
REC
I
TIMER
Submenu will appear.
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Refer to
set the selected item.
to
on pages 83-85 and
1
4
4
5
When you finish with setting, press
[SETUP] to exit.
82 EN
E9C80UD.indd 82
2006/12/19 14:03:34
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud
sounds.
Disc Audio (Default: Digital Out)
1
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Use [K / L] to select a setting, then press [OK].
Dynamic Range Control
DVD
ON
Use [K / L] to select a desired item, then press [OK].
OFF
Disc Audio
DVD
Your setting will be activated.
Digital Out
Dynamic Range Control
ON
Note
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
Digital Out
Set the digital audio output.
Use [K / L] to select a setting, then press [OK].
Video (Default: Progressive Scan)
2
Use [K / L] to select a desired item, then press [OK].
Video
DVD
Digital Out
DVD
Progressive Scan
Still Mode
OFF
PCM
Dolby Digital
48kHz
Auto
Stream
Selection menu will appear. Proceed to step
or
.
A
B
Settings for PCM (Default : 48kHz)
A
Progressive Scan (Default : OFF)
Use [K / L] to select a setting, then press [OK].
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
Digital Out - PCM
DVD
48kHz
96kHz
Your setting will be activated.
1) Use [K / L] to select “ON“, then press [OK].
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
Video - Progressive Scan
DVD
ON
OFF
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
2) Use [{ / B] to select “Yes“, then press [OK].
Video - Progressive Scan
DVD
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
Note
When playing back disc with copyright protection
NOTE:
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Yes
Activate?
No
Settings for Dolby Digital (Default : Stream)
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
B
Use [K / L] to select a setting, then press [OK].
Digital Out - Dolby Digital
DVD
Note
PCM
Stream
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to “Method 2” on page 16.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
EN 83
E9C80UD.indd 83
2006/12/19 14:03:35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Still Mode (Default : Auto)
Select “Auto” usually.
Subtitle (Default : OFF)
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
Use [K / L] to select a setting, then press [OK].
Language - Subtitle
DVD
Video - Still Mode
DVD
OFF
Auto
English
French
Spanish
Other
Field
Frame
Your setting will be activated.
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
: Images in the still mode will be stabilized.
Field
If “Other” is selected, press 4-digit code using
[the Number buttons].
Frame : Images in the still mode will be highly defined.
Note
Language - Subtitle
DVD
• Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
Code Input
-
-
-
-
Language
3
Use [K / L] to select a desired item, then press [OK].
• When you finish entering the code, press [OK]. Refer
to the language code table on page 95.
Language
DVD
Disc Menu
English
Original
OFF
Audio
Note
Subtitle
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
Disc Menu (Default : English)
Set the language for disc menu.
Use [K / L] to select a setting, then press [OK].
Language - Disc Menu
DVD
English
French
Spanish
Other
Your setting will be activated.
Audio (Default : Original)
Set the audio language.
Use [K / L] to select a setting, then press [OK].
Language - Audio
DVD
Original
English
French
Spanish
Other
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
84 EN
E9C80UD.indd 84
2006/12/19 14:03:35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Parental Lock (Default: OFF)
A password has not been set yet.
4
A
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select “Yes”. Use [the Number buttons]
to enter a new password except for 4737, then press
[OK].
Parental Lock
DVD
Parental Lock
DVD
Change password?
Yes
No
Use [K / L] to select the desired level, then press [OK].
Password Input
-
-
-
-
Parental Lock
DVD
OFF
Yes
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
Your setting will be activated.
A password has been set already.
2 [G]
1 [Kid Safe]
B
If a password has not been set yet, proceed to
If a password has been set already, proceed to
.
.
A
B
• Use [the Number buttons] to enter the current
password.
DVD
Parental Lock
Note
• Parental lock function may not be available to some
discs.
Password Input
* * * *
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
• Use [K / L] to select “Yes”. Use [the Number buttons]
to enter a new password, then press [OK].
<change the password>
Parental Lock
DVD
Parental Lock
DVD
Change password?
Yes
No
Password Input
-
-
-
-
Yes
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared and parental levels
will be set to “OFF”.
EN 85
E9C80UD.indd 85
2006/12/19 14:03:36
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display
Use [K / L] to select a desired item,
then press [OK].
STANDBY-ON
3
Display
VCR DVD
English
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
OSD Language
Angle Icon
ON
A
Screen Saver
FL Dimmer
10 minutes
Bright
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
Selection menu will appear.
SPACE
CLEAR
.
0
OSD Language (Default : English)
DISC MENU
SETUP
Set the language for the on-screen display.
o
Use [K / L] to select a setting, then press [OK].
s
B
OK
p
VCR DVD
OSD Language
TITLE
RETURN
English
Français
Español
j
F
i
B
Your setting will be activated.
h
g
C
Angle Icon (Default : ON)
CHANNEL
Set to “ON” to show the angle icon during the playback.
--
+
Use [K / L] to select a setting, then press [OK].
REC MODE VCR
DVD
TIMER
AUDIO
DVD
Angle Icon
ON
REC
OFF
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
Your setting will be activated.
SEARCH
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the TV
screen.
Use [K / L] to select a setting, then press [OK].
Screen Saver
DVD
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Your setting will be activated.
FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [K / L] to select a setting, then press [OK].
VCR DVD
FL Dimmer
Auto
Bright
Dark
Press [STOP C] if you are playing back a disc.
Press [SETUP].
You can choose one from “Auto”, “Bright” and “Dark”.
If “Auto” is selected, the display gets dark when the
power is off.
1
Use [K / L] to select “Display”, then
press [OK].
Press [SETUP] to exit.
2
4
86 EN
E9C80UD.indd 86
2006/12/19 14:03:37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
Playback
Recording
Press [VCR] first.
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons] or [CHANNEL
remote control.
• There is a cassette tape with a erase-protection tab in
the unit.
• The desired recording mode is selected in SP (standard
play) or SLP (super long play) mode by pressing
[REC MODE] on the remote control.
1)Press [STANDBY-ON y] on the remote control or
the front panel of the unit.
When you are playing back a cassette tape, turn the TV
on and be sure to select the input to which the unit is
connected.
/
] on the
Press [VCR].
2)Insert a prerecorded cassette tape. Press [PLAY B]
to begin playback.
3)During playback, press [PAUSE F].
Playback will pause and sound will be muted.
Recording mode:
Tape speed
Type of tape
SP mode
Recording / playback time
4)Press [PLAY B] to resume playback.
T60
T120
T160
5)Press [STOP C] to stop playback.
1hour
2hours
6hours
2-2/3hours
8hours
SLP mode
3hours
6)Press [STOP C / EJECT A] on the front panel of the
unit to eject the cassette tape.
• Select stereo or SAP. Refer to page 29.
• Refer to page 37 for instructions on timer recording.
Note
1)Press [REC I] to begin the recording.
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
To temporarily stop recording or to resume it, press
[PAUSE F]. After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[CHANNEL
/
] on the remote control.
2)Press [STOP C] when the recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
erase-protection tab
the hole with cellophane tape.
EN 87
E9C80UD.indd 87
2006/12/19 14:03:37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
One-touch Timer Recording (OTR)
Index Search
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
Press [VCR] first.
1)Press [SEARCH] so that “INDEX SEARCH” menu
appears.
1)During normal recording, press [REC I] to begin
the one-touch timer recording.
You can select a fixed recording time by pressing
[REC I] repeatedly.
2)Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
(0:30)
(1:00)
(Normal recording)
(8:00)
(7:30)
INDEX SEARCH
03
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-touch
timer recording, press [REC I] repeatedly until the
desired length appear.
3)Press [E], [D] to start index search.
If you want to go in the forward direction, press [ D].
If you want to go in the reverse direction, press [E].
To cancel the one-touch timer recording within the
specified time, press [STOP C].
After index search, the VCR will play back the cassette
tape automatically.
Note
• To see the remaining recording time on the TV
screen during the one-touch timer recording, press
[DISPLAY].
CURRENT PROGRAM
Beginning
of tape
End
of tape
• You cannot pause the one-touch timer recording.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
• If VCR the one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
INDEX MARK
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power to stop one-touch timer
recording.
Note
• You can make the index mark up to 20.
- Using [REC I] or [STOP C].
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
standby mode automatically if a timer recording has
been programmed. Press [TIMER SET] to cancel the
standby mode for using the unit continuously.
88 EN
E9C80UD.indd 88
2006/12/19 14:03:37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
Time Search
Other Operations
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [D] to fast forward
the cassette tape.
Press [VCR] first.
1)Press [SEARCH] repeatedly so that “TIME SEARCH”
menu appears.
Rewind:
When the unit is in stop mode, press [E] to rewind the
cassette tape.
To cue or review picture during playback (picture search):
Press [E], [D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
2)Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
TIME SEARCH
2:50
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [CHANNEL
/
]
3)Press [E], [D] to start time search.
If you want to go in the forward direction, press [D].
If you want to go in the reverse direction, press [E].
After time search, the unit will play back the cassette
tape automatically.
on remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to “0:00:00”.
To playback in slow motion:
Press [PAUSE F] during playback, then press [D].
Note
Press [D] or [E] repeatedly to select the desired
speed. Slow forward or rewind speed varies with the
tape.
• Index search and time search are not available
during recording.
• Press [STOP C] to stop the search.
Automatic rewind:
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
When a cassette tape is played back or fast forwarded to its
end, the cassette tape will rewind to the beginning, stop
and eject itself.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
Your Selection
HIFI
MONO
Monaural
L+R
L-channel
R-channel
Type of recorded tape
non Hi-Fi tapes
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program program program
Note
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY B].
EN 89
E9C80UD.indd 89
2006/12/19 14:03:37
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
• Press [TIMER SET] to cancel the timer standby mode.
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• Check the connection to your TV (page 16).
• Check the RF output channel when you view a TV program using RF
connection.
• Switch the input selector on your TV (such as to “E1”) so that the signal
from the unit appears on the TV screen.
TV program reception does not fill the • Try to set the channels with “Auto Channel Preset” or “Manual Channel
TV screen.
Preset” in “Channel” menu (pages 22-24).
• Select a channel of any TV program using [CHANNEL
• Press [DTV/TV] if necessary.
/
].
TV program pictures are distorted.
• Adjust TV antenna.
• Adjust the picture. (Refer to the TV’s instruction manual.)
• Place the unit and TV farther apart.
• Place the TV and any bunched RF coaxial cables farther apart.
TV channels cannot be changed.
• Switch the input to TV.
• Connect the RF coaxial cable correctly (pages 13-15).
Playback picture is distorted.
There is no sound.
• Keep the device which may cause electrical disturbances, such as a
cellular phone, away.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
D
V
D
•
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode,
sound is not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not
output. This is not a malfunction.
V
C
R
The channel cannot be changed from • Set the TV’s input to “TV.”
the channel you are recording.
Nothing was recorded even though
you set the timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for
more than 30 seconds. Reset the clock (pages 25-26).
• Disconnect the AC power cord from the AC outlet, and connect it again.
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Timer recording is not complete or
did not start from the beginning.
• The timer setting overlapped with another setting that has priority (page 40).
• Disc space was not enough.
Timer recording is impossible.
• Make sure
[TIMER SET].
appears on the front panel display of this unit. If not, press
The remote control does not function. • Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• Check if you are pointing the remote control at the recorder and NOT
the TV.
If you have a Plasma TV, it may interfere with the IR signal. Try the
remote with the Plasma off. If the remote works, you may need to move
the unit away from the plasma TV.
• Press [DVD] or [VCR], whichever you need. Then, try again.
• Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly.
• When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it in again.
90 EN
E9C80UD.indd 90
2006/12/19 14:03:38
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
There is no picture.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 83).
Picture noise appears.
• Clean the disc with a cleaning cloth.
Playback picture from the external
devices connected to this unit is
distorted.
• If the picture output signal from the external devices passes through
this unit to get to your TV, the copy protection signal applied to some
DVD could affect the picture quality. Disconnect the playback device in
question and connect it directly to your TV.
There is no sound.
• If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting
in “Disc Audio” (page 83).
• Clean the disc with a cleaning cloth.
Sound is noisy.
• Clean the disc with a cleaning cloth.
No DTS sound is output.
The disc does not play back.
• This unit is not compatible with DTS sound.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 50).
• The region code on the DVD-video does not match the unit (page 50).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
Discs recorded on this unit cannot be • If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the
played back on other DVD players.
The disc does not start playback from
the beginning.
disc after recording (page 46).
• Resume playback was activated (page 56). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first insert.
D
V
D
The unit starts playing back the disc
automatically.
• The DVD-video features an auto playback function.
Some functions such as stop, search, • Depending on the disc, you may not be able to do some of the
or slow-motion playback cannot be
performed.
operations. Refer to the instruction manual supplied with the disc.
The language for the sound track
cannot be changed.
• Multilingual tracks are not recorded being played back.
• The DVD-video prohibits the changing of the language for the sound
track.
• Try changing the language using the DVD-video’s menu.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-video.
• The DVD-video prohibits changing of the subtitles.
• Try changing the subtitle using the DVD-video’s menu.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording does not stop immediately • It may take a few seconds for the unit to input disc data before
after you press [STOP C]. recording stops.
Recording does not start immediately • A brand-new DVD+RW has been inserted. It takes a while for the unit to
after you press [REC I].
automatically format a DVD+RW.
The disc tray does not open when you
press [OPEN/CLOSE A].
• It may take a few seconds for the disc tray to open after you have
recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
EN 91
E9C80UD.indd 91
2006/12/19 14:03:38
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
“Repairing” appears on the TV screen.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
Repairing
It may take several minutes up to about several hours.
In a case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
D
V
D
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
Yes
No
Repairing
Picture noise appears.
• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
(page 5).
• Adjust tracking control for better picture by pressing [CHANNEL
while you are playing back a cassette tape.
/
]
V
C
R
The casette tape does not play back. • No cassette tape is inserted.
Recording does not start after you
• Make sure the cassette tape has a erase-protection tab when you record
to a cassette tape. If needed, cover the hole with cellophane tape.
press [REC I].
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
playback / recording is stopped.
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
92 EN
E9C80UD.indd 92
2006/12/19 14:03:38
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which bear
the marks on page 50.
• Insert the disc with the labeled side
facing up.
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 85).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered
the copy prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 33).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This disc is protected and not recordable.
• You are trying to record on to the
protected disc which is set in “Disc Edit”
menu.
• Release the disc protect setting in “Disc
Edit” menu (page 76).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (page 66).
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
Recording Error
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 69-70).
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Insert a new disc.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 46).
Recording Error
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Replace Disc Menu” to “ON” to
rewrite the menu, after that you will
record to disc (page 34).
The disc has a different menu layout. (Set
“Replace Disc Menu” to “ON” to rewrite
the menu.)
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
EN 93
E9C80UD.indd 93
2006/12/19 14:03:38
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another
country?
Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
No, you cannot control the unit by PC.
– Can I program a timer recording with cable/satellite
box?
Yes, you can. Select “E1” or “E2” as your recording
channel, and leave the cable/satellite box on (pages 15,
37-38).
– Can I record one channel while watching another
channel using a cable/satellite box?
It depends on your connection configurations. For
more details, please kindly contact your cable/satellite
provider.
– Can I connect this unit directly to a TV which only has
an antenna in jack using an RF coaxial cable?
No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 14). This unit does not have an RF modulator.
– Can I change the channels on the cable/satellite box
using the remote control of this unit?
No. Changing the channels on the cable/satellite box
using this unit’s remote control is not possible. You
need to use the remote control supplied with the
cable/satellite box to change the channels on the cable/
satellite box.
94 EN
E9C80UD.indd 94
2006/12/19 14:03:38
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
EN 95
E9C80UD.indd 95
2006/12/19 14:03:38
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PCM (pulse code modulation)
An electrical signal that directly represents sound.
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also lot of data compared to formats such as Dolby Digital
“Digital Audio”.
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Progressive Scan (525p/480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(525i/480i) TV signals. Refer to page 83 for instructions on
selective progressive scan mode.
Chapter
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture
than that in interlace (525i/480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
Sampling Frequency
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R.
Title (DVD only)
A collection of chapters on DVD. See also “Chapter”.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
Track
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
Video CD
PBC (playback control) (video CD only)
The contents of a video CD. When playing back a video
CD with the PBC function, the title menu will appear
automatically.
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
96 EN
E9C80UD.indd 96
2006/12/19 14:03:39
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R
VHS cassette tape
System
VCR video heads
Four heads
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
120V AC +/-10%, 60Hz +/-5%
30W (standby: 3.3W)
17 3/16 x 3 15/16 x 10 1/4 inches (435 x 99.5 x 260mm)
9.5 lbs. ( 4.3kg )
Operating temperature
Operating humidity
TV format
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
Recording
Recording format
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
Recording discs
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Tuning system
Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
CATV
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
Terminals
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
1Vp-p (75Ω)
Video input
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
VHF/UHF/CATV input and output
F-type
75Ω unbalanced
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
Audio output
RCA jack x 4
Video input
RCA jack x 1
Video output
RCA jack x 1
1Vp-p (75Ω)
S-video input
Mini DIN 4-pin x 1
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
500mVp-p (75Ω)
C: 286mVp-p (75Ω)
C: 286mVp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
S-video output
Mini DIN 4-pin x 1
Component video output
RCA jack x 3
Coaxial digital audio output
RCA jack x 1
PR/CR: 700mVp-p (75Ω)
Note
• The specifications and design of this product are subject to change without notice.
EN 97
E9C80UD.indd 97
2006/12/19 14:03:39
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW
y DVD-R.
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
borrados muchas veces.
En este aparato los discos DVD-RW/DVD-R serán
grabados automáticamente en el modo DVD+VR.
Discos reproducibles
Logotipos
DVD-video
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo,
según sea la condición del medio el equipo podría no
leer el disco correctamente.
DVD+RW
DVD+R
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
DVD-RW
JVC
(Sólo discos en modo de video finalizados)
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
DVD-R
(Sólo discos en modo de video finalizados)
El comportamiento de cualquier otro disco no está
garantizado.
CD-DA (CD de audio)
CD de video
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin
finalizarlos. Sin embargo, si usted ha añadido o
eliminado capítulos, u ocultado capítulos, debe
ejecutar “Compatibilizar edic.” antes de poder ver
dichos efectos en otros equipos. (Consulte la página
78.) Para reproducir discos que no sean DVD+RW en
otros reproductores de DVD, usted necesitará
finalizarlos.
CD-RW
CD-R
Logotipo
Atributos
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
Tiempo de grabación máx. aprox.
(modo SLP):
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
Archivos reproducibles
Medio
DVD+RW
DVD+R
CD-DA
CD-RW/-R
MP3
es una marca registrada de
DVD Format/Logo Licensing Corporation.
DVD-RW
DVD-R
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
Disco no Grabable
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 77.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
98 ES
E9C80UD.indd 98
2006/12/19 14:03:39
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Conexión Básica
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión básica ilustrada más abajo.
parte trasera de este aparato
OUT
DVD/VCR
DVD
DVD/VCR
IN ---AUDIO---OUT
S-VIDEO
L
L
S-VIDEO
IN ---AUDIO---OUT
IN
ANTENNA
antena de
VHF / UHF
R
R
IN
IN ---VIDEO---OUT
OUT
IN
L
cable coaxial
de RF
R
IN
IN ---VIDEO---OUT
ANTENNA
o
parte trasera de su televisor
cable coaxial de RF
empresa de
TV por cable
Esta conexión es sólo para
el procesamiento de cada
elemento de la señal de TV
cable de
cable de
video RCA
audio RCA
R
L
ANT. IN
AUDIO IN VIDEO IN
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
Conexión a Una Caja de TV por Cable / Satelital
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión como se ilustra abajo.
ej.)
cable de video RCA
parte trasera de este aparato
cable de
audio RCA
OUT
DVD/VCR
DVD/VCR
IN ---AUDIO---OUT
OUT
IN
S-VIDEO
S-VIDEO
IN --- AUDIO---OUT
L
L
IN
ANTENNA
R
R
IN
R
L
IN ---VIDEO---OUT
VIDEO OUT
AUDIO OUT
L
caja de TV p
cable/satelital
cable coaxial
de RF
ANTENNA
R
IN
IN ---VIDEO---OUT
Esta conexión es sólo
para el procesamiento
de cada elemento de
la señal de TV
cable coaxial
de RF
RF OUT ANT. IN
antena
parabólica
satelital
ANT. IN
cable de
te trasera de su televisor
audio RCA
cable de
video RCA
cable coaxial
de RF
o
R
L
empresa de
TV por cable
VIDEO IN
AUDIO IN
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
ES 99
E9C80UD.indd 99
2006/12/19 14:03:39
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación Básica
Configuración Inicial
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
Presione [OPEN/CLOSE A] para abrir
la bandeja de discos e insertar su
disco con el rótulo aupntando hacia
arriba.
Presione [STANDBY-ON y].
1
2
Antes:
* Asegúrese de que el disco
sea compatible con este
aparato.(Para obtener la lista
de discos compatibles
1
Encienda el televisor. Seleccione la entrada a
la cual está conectado el aparato.
consulte la página 33.)
Utilice [K / L] para seleccionar su
idioma deseado, y luego presione
Para seleccionar un modo de
grabación presione [REC MODE].
2
[OK] para establecerlo.
Initial Setup
HQ (1Hr)
0:58
English
Français
Español
Calidad del video
y el sonido
Modo de
grabación
Tiempo de
grabación
Disco de 8 cm Disco de 12 cm
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr) 108 min
18 min
36 min
45 min
54 min
72 min
60 min
120 min
150 min
180 min
240 min
360 min
Buena
Utilice [K / L] para seleccionar el tipo
deseado de canales preseleccionados,
y luego presione [OK].
3
Deficiente
Ajuste inicial
Antena
Utilice [CH
/
] o [los botones
Cable (Analógico)
Cable (Analógico/Digital)
numéricos] para seleccionar el canal
que desea grabar.
3
4
El equipo comenzará a obtener los canales
disponibles en su región.
CH 12
Presione [OK] para activar “Ajste
Manual de Reloj”.
Presione [REC I] para iniciar la
grabación.
4
5
Ajuste inicial
Ajste Manual de Reloj
Para configurar la grabación a un toque
con temporizador (OTR)...
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC I] repetidamente hasta que aparezca
en la pantalla del televisor la longitud deseada de
grabación (30 minutos a 6 horas).
Utilice [K / L] para seleccionar el
calendario o la hora, y luego presione
[OK].
Comenzará la grabación a un toque con temporizador.
Ajuste inicial
I
0:30
0:30
---- / -- / ---- ( ---- )
-- : ----
(grabación normal)
1:00
Utilice [{ / B] para seleccionar un
6:00
5:30
elemento a configurar, y utilice [K /
para seleccionar el contenido de su
preferencia, y luego presione [OK].
L]
6
• Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado,
presione [STOP C].
Ajuste inicial
Para de tener la grabación presione
[STOP C].
ENE / 01 / 2007 ( LUN )
12: 00 AM
5
100 ES
E9C80UD.indd 100
2006/12/19 14:03:39
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación con Temporizador
Usted puede programar el equipo para que grabe hasta 8 programas, con un mes de anticipación. También hay
disponibles grabaciones de programas diarias o semanales.
Antes de grabar, asegúrese de que
• Antes de establecer una programación del temporizador configure el reloj.
• Inserte un disco grabable con suficiente espacio libre.
Configure una programación del
temporizador.
SPACE
CLEAR
.
0
3
4
5
S2
DISC MENU
o
Presione [OK].
s
B
OK
p
TITLE
N
4
Presione [TIMER SET] para configurar
una programación del temporizador.
j
F
i
B
h
g
C
Aparecerá
en el pantalla del panel frontal.
CHANNEL
--
+
Configure la fecha.
1
REC MODE
D
TIMER
AUDIO
Programaci. con Reloj
VCR DVD
o
p
DVD
VCR
Fcha Empieza Termina
1. ENE/01 --:-- --:--
2. ---
CH
Modo
B
REC
12 DVD
I
TIMER
SET
CM SKIP D.DUBBING
RAPID PLAY
Configure las horas de inicio y finalización.
Programaci. con Reloj
VCR DVD
o
SEA
DVD
VCR
Fcha Empieza Termina
CH
Modo
B
5
1. ENE/01 11:57AM
2. ---
--:--
12 DVD
p
Seleccione un modo deseado de entrada y el
canal a grabar.
Para obtener más detalles, consulte “How to select
a channel number for the timer recording” en la
página 38 del manual del usuario.
Presione [TIMER].
1
2
Programaci. con Reloj
VCR DVD
o
DVD
VCR
Utilice [K / L] para seleccionar un
número de programa, y luego
presione [OK].
Fcha Empieza Termina
CH
Modo
B
1. ENE/01 11:57AM 10:57PM
12 DVD
p
2.
---
Seleccione un medio de grabación
(“DVD” o “VCR”).
Programaci. con Reloj
VCR DVD
Programaci. con Reloj
VCR DVD
DVD
o
Fcha Empieza Termina
CH
Modo
VCR
DVD
VCR
Fcha Empieza Termina
CH
Modo
1.
2.
3.
4.
5.
6.
7.
8.
---
---
---
---
---
---
---
---
B
1. ENE/01 11:57AM 10:57PM DTV 125.10 DVD
2. ---
p
Seleccione un modo de grabación.
Programaci. con Reloj
VCR DVD
o
DVD
VCR
Fcha Empieza Termina
CH
Modo
1. ENE/01 11:57AM 10:57PM DTV 125.10 DVD SP
p
2.
---
Reproducción
Abra la bandeja
Inserte un disco.
Comience a
reproducir.
Detenga la
reproducción.
de discos.
1 2 3 4
OPEN/CLOSE
C
B
A
ES 101
E9C80UD.indd 101
2006/12/19 14:03:40
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI CORPORATION
Customer Service
Tel: 1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
E9C80UD
1VMN23373A ★★★
E9C80UD.indd 102
2007/03/06 17:10:16
Download from Www.Somanuals.com. All Manuals Search And Download.
|
LG Electronics Refrigerator LMX28G83 User Manual
Liebert Car Video System NX 1+1 User Manual
Lincoln Electric Welding System IM607 User Manual
Link electronic Stereo Amplifier MC 6 User Manual
Logitech Universal Remote R400 User Manual
Magic Chef Convection Oven MCSGC12W User Manual
Magnavox Stereo System US2 MANT901 User Manual
Makita Marine Instruments PE3450H User Manual
McCulloch Automobile Parts ZM3816 BF 966582001 User Manual
Metra Electronics Satellite Radio 95 7801 User Manual