Magnavox DVD VCR Combo DV220MW9 User Manual

Owner’s Manual

Manual del Usuario

DV220MW9

DVD/CD Player

with Video Cassette Recorder

Read your Owner’s Manual first for

quick tips that make using your

Magnavox product more enjoyable.

If you have read assistance,

you may access our online help at

www.magnavox.com/support

or call

Lea primero el Manual del usuario,

en donde encontrará consejos que

le ayudarán a disfrutar plenamente

de su producto Magnavox.

Si después de leerlo aún necesita ayuda,

consulte nuestro servicio de

asistencia en línea en

1-800-605-8610

while with your product

(and Model / Serial number)

www.magnavox.com/support

o llame al teléfono

1-800-605-8610

y tenga a mano el producto

(y número de model / serial)

STANDBY-ON

POWER ON

OPEN/CLOSE

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

VIDEO

AUDIO

REW

F.FWD STOP/EJECT PLAY RECORD

TRACKING

SOURCE

STOP

PLAY

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING:

Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

LASER SAFETY

This apparatus is classified as a CLASS 1 LASER PRODUCT.

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to

service this apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result

in hazardous radiation exposure.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates

viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing

or climbing on it. A falling unit can cause serious injury or even death.

Never use a gas duster on this unit.

The gas trapped inside of this unit may cause ignition and explosion.

To Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

Do not put your fingers or objects into the unit.

Location and Handling

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is

placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

Dew Condensation Warning

Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few

hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

Note about Recycling

This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local

regulations concerning chemical wastes.

For product recycling information, please visit - www.magnavox.com

Notice for Progressive Scan Output

Consumers should note that not all high definition television sets are fully compatible with this product and may

cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,

it is recommended that the user switch the connection to the ‘standard deﬁnition’ output. If there are questions

regarding your TV set compatibility with this 525p(480p) DVD player, please contact our customer service center.

Trademark Information

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

•

is a trademark of DVD Format/Logo Licensing Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Contents

PRECAUTIONS

ADVANCED PLAYBACK

Disc Menu

Safety Instructions

Calling Up a Menu Screen During Playback

Resume Playback

PREPARATION

Supplied Accessories · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4

About Cassette Tapes and Discs

Playable Media · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5

Unplayable Disc · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5

Region Code · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5

Color System · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5

MP3 Playback

Zoom

Camera Angles

Stereo Sound Mode

Title, Chapter, Track, Folder or File Search

Index Search

Time Search

Repeat Playback

Repeat A-B Playback

Auto Repeat Playback

Programmed Playback

Random Playback

Function Overview

Remote Control

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6

Front Panel · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8

Rear Pane

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9

Installing the Batteries for the Remote Control

· · · · · · 9

Settings· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 18

Connections · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10

Black Level Setting· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

Connection to a TV

Subtitle Language and Audio Language· · · · · · · · · · · ·

Connection to an Audio System· · · · · · · · · · · · · · · · · · · · 12

On-Screen Display

Initial Setups · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13

Turning on Unit for the First Time

RECORDING

Clock Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13

Recording & OTR (One-touch Timer Recording)· · · · · 20

Timer Recording· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 21

Note for Timer Recording & OTR · · · · · · · · · · · · · · · · · · · 21

Satellite Link· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 22

Dubbing a Cassette Tape · · · · · · · · · · · · · · · · · · · · · · · · · · 22

BASIC OPERATIONS

For VCR Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

For Disc Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

Hint for Disc Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

Fast Forward / Fast Reverse Playback· · · · · · · · · · · · · · ·

Still Mode / Step-by-step Playback · · · · · · · · · · · · · · · · ·

Slow Forward Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

To Skip the Titles, Chapters, Tracks, or Files · · · · · · · · ·

To Reset the Cassette Tape Counter (Counter Reset) · · 15

To Rewind the Cassette Tape automatically

OPTIONAL SETTINGS

Changing the DVD Settings (in the setup menu) · · · 23

PARENTAL Setting

INITIALIZE

(Auto Rewind) · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

TROUBLESHOOTING

Troubleshooting Guide

INFORMATION

Maintenance

Specifications

LIMITED WARRANTY· · · · · · · · · · · · · · · · · · · · · back cover

Supplied Accessories

MAGNAVOX is a registered trademark of Philips Electronics North

America Corporation and is used by Funai Electric Co., Ltd. and

Funai Corporation, Inc. under license from Philips Electronics

North America.

remote control

RCA audio/video cables

(NB677UD)

copied, transmitted, disseminated, transcribed, downloaded or

stored in any storage medium, in any form or for any purpose

without the express prior written consent of Funai. Furthermore,

any unauthorized commercial distribution of this manual or any

revision hereto is strictly prohibited.

AA (1.5V DC) battery × 2

Information in this document is subject to change without notice.

Funai reserves the right to change the content herein without the

obligation to notify any person or organization of such changes.

Owner’s Manual

Quick Start Guide

Owner’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

About Cassette Tapes and Discs

Playable Media

DVD-

VIDEO

Cassette

Tape

DVD-RW

DVD-R

DVD+RW

DVD+R

CD-DA

CD-RW

CD-R

Media Type

Logo

Symbols used

in this manual

AudioCD

MP3

DVD-Video

VHS

Recorded

Signal

analog

video

digital audio or MP3

Unplayable Disc

Caution: Never play the following discs.

DVD-RAM

DVD-audio

CD-i

DVD with region codes other than 1 or ALL

• DTS-CD

DVD-ROM for personal computers

CD-ROM for personal computers

• the discs with labels, scratches, stains, blemishes, etc.

HD DVD

Blu-ray disc

photo CD

• video CD

Caution: The sound may not be heard on the following disc.

super audio CD

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super

audio CD layer cannot be delivered.

Note:

Any other discs without compatibility indications

Unfinalized discs cannot be played back.

For DVD-RW/R, discs recorded in the VR (video recording) format cannot be played back. Only the finalized video

format discs can be played back.

Note:

Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or

special properties of discs.

• You can play back discs which bear the marks listed in “Playable Media”. If you use nonstandardized discs, this

unit may not play them back. Even if they are played back, the sound or video quality will be compromised.

If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back

properly.

Region Code

Color System

This unit has been designed to play back DVD

with region 1. DVD must be labeled for ALL

regions or for region 1 in order to play back on

the unit. You cannot play back DVD that are

labeled for other regions. Look for the symbols

on your DVD. If these region symbols do not

appear on your DVD, you cannot play back the

DVD in this unit.

DVD is recorded in different color systems throughout the

world. The most common color system is NTSC (which is

used primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be

recorded in the NTSC system. You cannot play back DVD

recorded in PAL color systems.

The number inside the globe refers to region of the world.

A DVD labeled for a specific region can only be played

back on the unit with the same region code.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Function Overview

Remote Control

Button names described in the Owner’s Manual

The instructions in this manual rest primarily on the premise that you will operate on the remote control (Please be

informed that some operations can only be made on the front panel of the unit).

5. CLEAR p.13



DVD mode:

STANDBY-ON

OPEN/CLOSE

TRACKING

Press to clear numbers entered incorrectly. (DVD,

SPEED

TIMER SET

CD, MP3)

Pulse para borrar los números ingresados incorrectamente. (DVD,

CD, MP3)

Press to cancel the point for A-B repeat. (DVD, CD, MP3)

Pulse para cancelar el punto para repetición de A-B. (DVD, CD, MP3)

• Press to clear all the tracks entered for programmed

playback. (DVD, CD, MP3)

CLEAR

Pulse para borrar todas las pistas ingresadas para la reproducción

programada. (DVD, CD, MP3)

INPUT

MODE

VCR

+10

DVD

DISPLAY

VCR mode:

• Press to exit the VCR menu.

Pulse para salir del menú de VCR.

PLAY

• Press to reset the cassette tape counter.

Pulse para restaurar el contador del casete.

STOP

6. DISPLAY

p.19



RECORD

TITLE

PAUSE

AUDIO

DVD mode:

Press to display the current disc mode.

Pulse para visualizar el modo de disco actual.

VCR mode:

DISC MENU

SETUP

• Press to display the current time, cassette tape

counter, and L1 / L2.

RETURN

A-B

ZOOM

ANGLE

Pulse para visualizar la hora actual, el contador del casete y L1 o L2.

SUBTITLE

REPEAT

7. VCR

(VCR) p.13



Press to activate VCR mode.

Pulse para activar el modo de VCR.

8. E /

DVD mode:

p.15



• Press to search forward / backward through a disc.

Pulse para buscar hacia adelante o hacia atrás en el disco.

• Press

[D]to begin slow forward playback in the

pause mode. (DVD)

Pulse [ D] para iniciar la reproducción lenta hacia adelante en el

modo pausa. (DVD)

VCR mode:

Press to forward / backward a cassette tape.

Pulse para adelantar o retroceder un casete.

Press [D] to begin slow forward playback in the

pause mode.

Pulse [ D] para iniciar la reproducción lenta hacia adelante en el

modo pausa.

1. TIMER SET (VCR) p.21

9. PREV H (DVD) p.15



Press to put the VCR into standby mode for a timer

• Press to go back to the previous chapters / titles.

(DVD)

recording.

Pulse para colocar el VCR en modo espera para una grabación

con temporizador.

Pulse para volver a los capítulos o títulos anteriores. (DVD)

Press to go back to the previous tracks (CD) / files

(MP3).

2. SPEED (VCR) p.20



• Press to select the recording speed.

Pulse para volver a las pistas (CD) o archivos (MP3) anteriores.

Pulse para seleccionar la velocidad de grabación.

10. RECORD (VCR) p.20



3. STANDBY-ON p.13

• Press to start recording or press repeatedly to



• Press to turn on the unit, or to turn the unit into

the standby mode. (To completely turn off the unit,

you must unplug the AC power cord.)

activate the One-touch Timer Recording.

Pulse para comenzar a grabar o pulse reiteradamente para activar

la grabación rápida con temporizador.

Pulse el boton para encender la unidad, o para pasar la

unidad al modo de espera. (Para apagar completamente la

unidad, debe desconectar el cable de alimentacion de CA.)

11. SEARCH p.16



DVD mode:

Press to search chapter / title (DVD).

4. Number buttons (DVD) p.16

Pulse para buscar un capítulo o título (DVD).

• Press to search track (CD), or folder / file (MP3).

Pulse para buscar una pista (CD), carpeta o archivo (MP3).

Press to search time (DVD, CD).



Press to select chapter / title (DVD), track (CD), or

folder / file (MP3) directly.

Pulse para seleccionar un capítulo o título (DVD), pista (CD), o

carpeta o archivo (MP3) directamente.

Pulse para buscar la hora (DVD, CD).

VCR mode:

• Press to call up the index or time search menu.

Pulse para visualizar el menú de búsqueda de hora o el índice.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

12. TITLE (DVD) p.16

26. NEXT G (DVD) p.15



• Press to call up the top menu on disc. (DVD)

• Press to skip chapters / titles. (DVD)

Pulse para visualizar el menú principal del disco. (DVD)

Pulse para saltar capítulos o títulos. (DVD)

Press to skip tracks (CD) / files (MP3).

13. DISC MENU (DVD) p.16



Pulse para saltar pistas (CD) o archivos (MP3).

Press to call up the disc menu on a disc. (DVD)

Pulse para visualizar el menú del disco en un disco. (DVD)

27. PAUSE

p.15



DVD mode:

14. SETUP p.23



• Press to pause disc playback.

DVD mode:

Pulse para pausar la reproducción del disco.

Press to call up the DVD menu.

Press to advance the playback one frame at a time.

Pulse para visualizar el menú de DVD.

(DVD)

VCR mode:

Pulse para avanzar la reproducción un cuadro por vez. (DVD).

Press to call up the VCR menu.

VCR mode:

Pulse para visualizar el menú de VCR.

• Press to pause the playback / recording of a cassette

15. ZOOM (DVD) p.16



tape.

• Press to magnify part of a picture. (2x, 3x, 4x or 1/2x)

Pulse para pausar la reproducción o grabación de un casete.

(DVD)

Press to advance the playback one frame at a time.

Pulse para amplificar parte de una imagen. (2x, 3x, 4x ó 1/2x) (DVD)

Pulse para avanzar la reproducción un cuadro por vez.

16. SUBTITLE (DVD) p.19



28. AUDIO

(DVD) p.19



Press to select subtitles on a disc. (DVD)

• Press to select audio languages on a disc. (DVD)

Pulse para seleccionar subtítulos en un disco. (DVD)

Pulse para seleccionar idiomas de audio en un disco. (DVD)

17. ANGLE (DVD) p.16



Press to select “STEREO” / “L-ch” / “R-ch”. (CD)

Press to select camera angles on a disc. (DVD)

Pulse para seleccionar “STEREO”, “L-ch” o “R-ch”. (CD)

Pulse para seleccionar ángulos de la cámara en un disco. (DVD)

29. OK (DVD) p.16



18. OPEN/CLOSE

DVD mode:

p.14



• Press to confirm the items.

Pulse para confirmar los ítems.

• Press to open or close the disc tray.

30. K / L / s /

p.16



Pulse para abrir o cerrar la bandeja del disco.

DVD mode:

VCR mode:

• Press to select items / settings.

Press to remove the videotape from the cassette

Pulse para seleccionar ítems o ajustes.

compartment.

VCR mode:

K / L :

Presiónelo para retirar la cinta de video del compartimiento del

casete.

• Press to select an item on the VCR menu.

19. TRACKING

(VCR) p.15



Pulse para seleccionar un ítem en el menú de la VCR.

Press either one of the buttons to stabilize the

picture manually if the picture begins to vibrate

s :

• Press to go back one step during clock and timer

vertically during the still mode

programming.

Pulse cualquiera de los botones para estabilizar la imagen de

forma manual si ésta comienza a vibrar de forma vertical durante

el modo pausa.

Pulse para retroceder un paso durante la programación del reloj y

el temporizador.

B :

20. +10 (DVD)

• Press to proceed to the next VCR menu.

• Press to change title / chapter / track / folder / file

Pulse para ir al siguiente menú de VCR.

number by 10 at a time.

31. RETURN

(DVD) p.18



Pulse para cambiar un título, capítulo, pista, carpeta o número de

archivo de 10 por vez.

Press to return to the previous operation in menu.

Pulse para volver a la operación anterior en el menú.

21. INPUT (VCR) p.20



32. A-B (DVD) p.17



Press to select input “L1” / “L2”.

Press to repeat between your chosen point of A and

Pulse para seleccionar entrada “L1” o “L2”.

B. (DVD, CD, MP3)

22. MODE (DVD) p.18



Pulse para repetir entre los puntos de A y B que seleccionó. (DVD,

CD, MP3)

• Press to set black level ON / OFF. (DVD)

Pulse para apagar o encender nivel de negro. (DVD)

33. REPEAT

p.17



• Press to arrange the playing order or to perform

DVD mode:

random playback. (DVD, CD, MP3)

• Press to play back a chapter / title repeatedly. (DVD)

Pulse para organizar el orden de reproducción o para ejecutar la

reproducción aleatoria. (DVD, CD, MP3)

Pulse para reproducir un capítulo o título reiteradamente. (DVD)

• Press to play back a track / disc repeatedly. (CD)

23. DVD (DVD) p.14



Pulse para reproducir una pista o disco reiteradamente. (CD)

• Press to activate DVD mode.

• Press to play back a file / folder / disc repeatedly.

Pulse para activar el modo de DVD.

(MP3)

24. PLAY

p.14



Pulse para reproducir un archivo, carpeta o disco reiteradamente.

(MP3)

• Press to begin the playback of a disc / a cassette tape.

VCR mode:

Pulse para comenzar la reproducción de un disco o casete.

• Press to select the repeat mode ON / OFF.

25. STOP

p.14



Pulse para encender o apagar el modo de repetición.

DVD mode:

Press to stop disc playback.

Pulse para detener la reproducción del disco.

VCR mode:

• This unit will automatically turn on the screen

saver after 5 minutes of inactivity and enter

standby mode after 25 minutes of inactivity.

Note:

• Press to stop the playback / recording of a cassette tape.

Pulse para detener la reproducción o grabación de un casete.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Front Panel

4 5

7 8

STANDBY-ON

OPEN/CLOSE

POWER ON

VIDEO

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

AUDIO

REW

F.FWD STOP/EJECT PLAY RECORD

TRACKING

SOURCE

STOP

PLAY

13 14 1516 17 18 19

21 22 23 24 25

L2 input jacks

1. STANDBY-ONy p.14

16. STOP C / EJECT A (VCR) p.14



• Press to turn on the unit, or to turn the unit into the

standby mode. (To completely turn off the unit, you

must unplug the AC power cord.)

STOP

Press to stop the playback / recording of a cassette

tape.

EJECT

2. POWER ON indicator

• Lights up when the unit is turned on.

• Press to remove the cassette tape from the cassette

compartment.

3. cassette compartment (VCR) p.14

Insert a cassette tape here.

4. REC indicator (VCR)



17. PLAY B (VCR) p.14



Press to start the playback of a cassette tape.

18. RECORD I (VCR) p.20

• Lights up during a recording, OTR (One-touch Timer



Recording) or timer recording.

• Press once to start a recording.

• Press repeatedly to activate an OTR (One-touch

Timer Recording).

Blinks when a recording is paused.

5. TIMER REC indicator (VCR) p.21



Lights up when a timer recording or OTR (One-touch

Timer Recording) has been set.

Blinks when a timer recording or OTR (One-touch

Timer Recording) has been finished or if the unit

could not complete the recording due to some error.

19. infrared sensor window p.9



• Receive signals from the remote control so that you

can control the unit from a distance.

20. TRACKING

(VCR) p.15



Press either one of the buttons to stabilize the

picture if the picture begins to vibrate vertically

during the cassette tape playback

6. OPEN/CLOSE A (DVD) p.14



Press to open / close the disc tray.

7. VCR output indicator (VCR)

21. SOURCE

• Lights up when the unit is in the VCR mode.

8. DVD output indicator (DVD)

Lights up when the unit is in the DVD mode.

9. DISC IN indicator (DVD)

• Press to switch to either DVD / VCR mode.

22. PREV H (DVD) p.15



• Press to go back to the previous chapters / titles /

tracks / files during playback.

• Lights up when the disc is in the disc tray.

10. PLAY indicator (DVD)

• Press and hold it to begin fast reverse search.

23. STOP C (DVD) p.14



• Lights up when the inserted disc is being played

• Press once to stop disc playback temporarily.

back.

24. PLAY B (DVD) p.14



Blinks when an unplayable disc is inserted.

Press to start / resume playback.

11. Disc tray (DVD) p.14



25. NEXT G (DVD) p.15



• Place a disc when it is open.

• Press to skip chapters / titles / tracks / files during

12. VIDEO IN jack (VCR) p.22



playback.

•

Connect an RCA video cable from the video output

Press and hold it to begin fast forward search

jack of your camcorder and other such devices here.

13. AUDIO IN jack (VCR) p.22



Connect an RCA monaural audio cable from the

audio output jack of your camcorder and other such

devices here

You can turn on the unit by pressing the buttons

6 or 24 (circled ones) or by inserting a cassette

tape.

If you turn off this unit, [OPEN/CLOSE A] on the

remote control is not available. Be sure to use

Note:

14. REW E (VCR) p.15



• Press to rewind the cassette tape or to view the

picture rapidly in reverse during playback (rewind

search).

[OPEN/CLOSE A] or [STOP/EJECT

unit.

A] on the

15. F.FWD D (VCR) p.15



• Press to rapidly advance the cassette tape or view

the picture rapidly in forward during playback

(forward search).

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Rear Panel

DVD

DVD/VCR

AUDIO OUT

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

OUT

AUDIO OUT

AUDIO IN

VIDEO IN

COAXIAL

VIDEO OUT

3 4 5 6 7 8

1. DVD/VCR AUDIO OUT jack p.10

7. DVD/VCR VIDEO OUT jack p.10



• Connect an RCA audio cable from here to the audio

input jack of your television or audio device. Standard

connection for DVD/VCR use.

• Connect an RCA video cable from here to the

VIDEO input jack of your television or audio device.

Standard connection for DVD/VCR use.

8. VCR VIDEO IN jack p.22

2. VCR AUDIO IN jack p.22



• Connect an RCA video cable from here to the video

output jack of your camcorder, VCR, etc.

•

Connect an RCA audio cable from the audio output

jack of your camcorder, VCR, etc. to here.

3. DIGITAL AUDIO OUT COAXIAL* jack p.12



For enhanced DVD viewing. DVD/VCR video and audio

connection required to view cassette tapes.

Connect a digital audio coaxial cable from here

to the digital audio coaxial in jack of a decoder or

audio receiver.

4. DVD AUDIO OUT* (analog) jack p.11



RCA audio and video cables are included for

Note:

• Connect an RCA audio cable from here to the audio

both VCR and DVD viewing. You can enhance

your DVD picture and sound quality with an

S-video cable, component video cables, or a

digital audio coaxial cable. Please purchase

the necessary cables at your local store.

(Refer to pages 11-12.)

input jack of your television or audio device.

5. S-VIDEO OUT* jack p.11



• Connect an S-video cable from here to the S-video

input jack of your television.

6. COMPONENT VIDEO OUT* jack p.11



Connect component video cables from here to the

component video input jacks of your television.

Installing the Batteries for the Remote Control

Install the 2 AA (1.5 V) batteries matching the polarity

indicated inside battery compartment of the remote

control.

30˚ 30˚

16 feet (5m)

23 feet (7m)

Caution: Never throw batteries into a fire.

Keep the following in mind when using the remote

control:

• Make sure that there are no obstacles between the

remote control and the infrared sensor window on the

unit.

The maximum operable ranges of the unit are:

Line of sight: approx. 23 feet (7m)

Either side of center:

Do not mix different types of batteries together

Note:

(e.g., Alkaline and Carbon-Zinc) or old batteries

with fresh ones. Although they may look similar,

different batteries may have different voltages.

• If the remote control is not to be used for a long

period of time, remove the batteries to prevent

damage or injury from possible battery leakage.

Do not try to recharge batteries; they can

overheat and rupture.

• Batteries should always be disposed of with

the environment in mind. Always dispose of

batteries in accordance with applicable laws

and regulations.

approx. 16 feet (5m) within 30°

Above:

Below:

approx. 16 feet (5m) within 15°

approx. 10 feet (3m) within 30°

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Connections

Connection to a TV

If Your TV Has Antenna in Jack Only

Before connecting, make sure the powers of the devices are turned off.

this unit

DVD

UDI

DVD/VCR

AUDIO OUT

VCR

VHF / UHF

antenna

COMPONENT

VIDEO OUT

DIGITAL

S-VIDEO

OUT

AUDIO OUT

AUDIO IN

VIDEO IN

COAXIAL

VIDEO OUT

To audio L

VCR

DVD

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

output jack

DIGITAL

AUDIO S-VIDEO

OUT

AUDIO OUT

ANT. IN

(Whittee))

To audio R

output jack

audio cable

cable TV company

AUDIO IN

(Red)

RF coaxial

cable

COAXIAL

VIDEO OUT

VIDEO IN

RF coaxial cable

RF modulator (not supplied)

RCA video cable

(Yellow)

To video

output jack

TO TV CHANNEL

AUDIO IN

VIDEO IN ANT. INv

rear of your RF modulator

(not supplied)

Set channel

3 or 4

No Antenna (RF) Output!

(White)

To audio L

(Red) (Yellow)

If your TV only has an Antenna input

To audio R

input jack

To video

ANT. IN

inputt jack

input jack

(no A/V inputs), you will need a

RF modulator (NOT INCLUDED) to

connect this player.

RF modulator

TO TV ANT. IN

CHANNEL VIDEO IN

AUDIO IN

After making the connection illustrated above;

1) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.

2) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.

• The quality of picture may become poor if this unit is connected to an RF modulator.

Note:

VCR and Basic DVD Connection

this unit

DVD

AUDI

DVD/VCR

AUDIO OUT

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

AUDIO IN

VIDEO IN

COAXIAL

VIDEO OUT

To audio L

DVD

DVD/VCR

AUDIO OUT

VCR

output jack

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

OUT

AUDIO OUT

To audio L To audio R

input jack input jack

(Whittee))

To video

RCA audio cable

input jack

AUDIO IN

(Red)

(White)

(Red)

(Yellow)

To audio R

output jack

COAXIAL

VIDEO OUT

VIDEO IN

(Yellow)

To video

output jack

RCA video cable

VIDEO

AUDIO IN

Connect this unit directly to your TV. If an RCA audio/video cables are connected to a VCR, pictures may be

distorted due to the copy protection system.

Note:

Supplied cables used in this connection are as follows:

•

RCA audio cable (L/R) x 1

RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

After connecting to your TV:

You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.

Please refer to your TV’s owner’s manual for details.

Input modes for common TV brands:

Listed below are inputs for common brand name TV’s.

Admiral:

Curtis Mathis: LINE1, LINE2,

00, 90, 91, 92, 93

AUX

KENWOOD:

LXI-Series:

Magnavox:

Panasonic:

RCA:

AUX

Samsung:

SANYO:

SHARP:

SONY:

TOSHIBA:

Zenith:

TV/VIDEO

VIDEO

VIDEO1, VIDEO2, VIDEO3

TV/GAME

AUX CHANNEL

TV/VIDEO

INPUT, TV/VCR, 00, 90, 91,

92, 93

GE:

INPUT, TV/VCR, 00, 90, 91,

92, 93

INPUT, AUX

VIDEO, VIDEO1, VIDEO2,

VIDEO3

HITACHI:

JVC:

Available on DVD Only

DVD

DVD/VCR

AUDIO OUT

VCR

this unit

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

OUT

AUDIO OUT

AUDIO IN

VIDEO IN

Basic Audio Connection

COAXIAL

VIDEO OUT

AUDIO IN

DVD

AUDIO

OUT

DVD/VCR

AUDIO OUT

VCR

To audio L

To audio R

inputt jack

DIGITAL

inputt jack

AUDIO OUT

(Whittee))

(Red)

AUDIO IN

VIDEO IN

To audio L

(Whittee))

output jack

COAXIAL

(Red)

VIDEO OUT

RCA audio cable

To audio R

output jack

and

Good Picture

DVD

DVD/VCR

AUDIO OUT

VCR

To S-video

input jack

S-VIDEO IN

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

OUT

AUDIO OUT

AUDIO IN

VIDEO IN

To S-video_L

output jack

AXIAL

VIDEO OUT

To component

video Y output jack

Better Picture

DVD

DVD/VCR

AUDIO OUT

VCR

COMPONENT

VIDEO IN

COMPONENT

AUDIO S-VIDEO

VIDEO OUT

To component

DIGITAL

OUT OUT

AUDIO OUT

video Y input jack

(Green)

To component

video C^Boutput jack

(Green)

AUDIO IN

VIDEO IN

component video cable

(Blue)

(Red)

To component

video CB input jack

COAXIAL

VIDEO OUT

(Red)

To component

video C^Routput jack

To component

video C^Rinput jack

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Connection to an Audio System

Playing Analog Audio

this unit

analog audio

input jacks

stereo system

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

AUDIO OUT

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

AUDIO IN

VIDEO IN

COAXIAL

AUDIO IN

VIDEO OUT

To audio L

output jack

DVD

DVD/VCR

AUDIO OUT

VCR

COMPONENT

AUDIO S-VIDEO

VIDEO OUT

TAL

O OUT

To audio L

input jack

To audio R

input jack

OUT

(White)

(Red)

(Whittee)) (Red)

AUDIO IN

VIDEO IN

(White)

COAXIAL

RCA audio cable

VIDEO OUT

(Red)

To audio^RR

output jack

Supplied cables used in this connection are as follows:

•

RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

Playing Digital Audio

Dolby Digital decoder

digital audio receiver

this unit

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

AUDIO OUT

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

AUDIO IN

VIDEO IN

COAXIAL

VIDEO OUT

digital audio

input jack

digital audio input jack

DVD

DVD/VCR

AUDIO OUT

VCR

DIGITAL AUDIO

COAXIAL IN

DIGITAL AUDIO

COAXIAL IN

DIGITAL

AUDIO OUT

To coaxial

output jack

AUDIO IN

VIDEO IN

To coaxial

input jack

To coaxial

input jack

COAXIAL

VIDEO OUT

BITSTREAM

PCM

digital audio coaxial cable

* You must select “BITSTREAM” or “PCM” in “DOLBY DIGITAL” setting. (Refer to page 23.)

Audio recording format of the disc

“Dolby Digital” setting of this unit

Actual output

2channel PCM

Dolby Digital

PCM

Dolby Digital

BITSTREAM

PCM

DVD-video

LPCM

2channel PCM

BITSTREAM

The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound

by an MD or DAT deck.

Note:

Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Initial Setups

Turning on Unit for the First Time

Clock Setting

VCR

Press

first.

Press

first.

Please note: most instructions in this manual refer to

remote control use.

SETUP

Be sure your TV’s input is set to VIDEO. (Name may

vary with TV manufacturer. See your TV manual for

details.)

Press

and use

to select “CLOCK SET”.

Then press to go to next step.

- M E N U -

TIMER PROGRAMMING

SATELLITE LINK

STANDBY-ON

AUTO REPEAT [OFF]

CLOCK SET

LANGUAGE SELECT

Press

• “LANGUAGE SELECT” menu appears.

If the clock is not set yet, the “CLOCK SET” menu

Use

to select your on-screen language.

appears when you press ^SETUP. In this case, go to step 2.

Then press

to continue.

LANGUAGE SELECT

ENGLISH

FRANCAIS

ESPAÑOL

[ON]

Use

to select the contents to suit your

preference.

Then press

to go to the next item.

CLOCK SET

MONTH DAY

1 0 - -

YEAR

- - - -

When “CLOCK SET” menu appears,

go to step 2 in “Clock Setting” on this page.

HOUR MINUTE

AM/PM

- -

To Change the Selected On-screen Language

Use

to select “AM” or “PM

”

CLOCK SET

SETUP

Press

until the main menu appears.

MONTH DAY

1 0 0 2

YEAR

TUE 2 0 1 2

HOUR MINUTE

0 5 4 0

AM/PM

P M AM

B PM

Use

Then press

to select “LANGUAGE SELECT”.

to go to next step.

SETUP

Press

to exit the “CLOCK SET” menu.

Use

“ESPAÑOL”.

Then press

to select “ENGLISH”, “FRANCAIS” or

• To go back, press [

] during steps 2 to 3.

• Clock setting will be lost after a power failure, or

this unit has been unplugged for more than 30

seconds.

Note:

CLEAR

If you accidentally select Spanish or French and

need English:

Note:

Press [SETUP] and choose

or SELECTION LANGUE . Press [

] and select

“ENGLISH”. Finally, press [CLEAR]

“

SELEC. IDIOMA

”

“

”

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

ASICPLAYBACK

Before: Turn on the TV.

For VCR Playback

For Disc Playback

(

page 16 for MP3 playback)



STANDBY-ON

Insert a cassette tape so that the unit

will be turned on automatically.

Press

Then press

to turn on the unit.

OPEN/CLOSE

Inserte un casete para que la unidad se encienda

automáticamente.

STANDBY-ON

1 1

Para encender la unidad, pulse

Luego pulse ^OPEN/CLOSE

OPEN/CLOSE

REC

TIMER REC

VCR

DVD

DISC IN

PLAY

AUDIO

STOP/EJECT PLAY RECORD

TRACKING

SOURCE

STOP

PLAY

• If the protection tab has

removed, playback will

start automatically.

VCR

Press

to switch to the VCR mode.

VCR

Insert a disc with its

label side facing up

Inserte un disco con el lado

de la etiqueta hacia arriba.

Para cambiar al modo de VCR, pulse

VCR

You need to press

every time you operate any of

VCR features.

• When using DVD AUDIO OUT jack,

DIGITAL AUDIO OUT COAXIAL jack,

COMPONENT VIDEO OUT jack and

S-VIDEO OUT jack, no VCR audio /

video will be output.

first

• Depending on the disc, playback will start automatically

without pressing

PLAY

• In case the DVD is recorded on both sides, make sure the

label of the side you want to playback is facing up.

DVD

Press

to start

Press

to switch to the

PLAY

DVD mode.

playback.

DVD

Pulse

para cambiar al modo

Pulse

para comenzar la

PLAY

de DVD.

reproducción.

DVD

• You need to press

first every time

you operate any of DVD features.

STOP

Press

to stop the

playback.

STOP

Pulse

para detener la

reproducción.

Press

to start playback.

PLAY

Pulse

para comenzar la reproducción.

For advanced playback, refer to the following pages.

STOP

Press

to stop the

Time Search

Auto Repeat

Index Search

p.17



p.17



p.17



playback.

STOP

Pulse

para detener la

reproducción.

To prevent damage to the cassette tape, still

or slow mode will automatically stop after 5

minutes.

Note:

For advanced playback, refer to the following pages.

Disc Menu

Resume Playback

Step-by-step Playback

Repeat Playback

• Angle

p.16

p.15

p.16

p.18

p.16



p.15



p.17



p.16



p.18



• To return to playback from the picture search,

• Still Mode

still or slow mode, press

• MP3 Playback

• Zoom

PLAY

• Search Functions

Programmed Playback

• Random Playback

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

For DVD, set “STILL MODE” to “FIELD” in

Note:

Hint for Disc Playback

“DISPLAY” menu if pictures in the pause mode

are blurred. ( page 23.)

The contents of DVD are generally divided into “titles”.

Titles may be further subdivided into “chapters”.

The audio CD contains “track” and CD-RW/-R with MP3

contains “file”, which may be in a “folder”.



For VCR, to prevent damage to the cassette

tape, still mode will automatically stop after 5

minutes.

DVD-video

Slow Forward Playback

title 1

title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

DVD

DVD-Video

Press

first.

Press [PAUSE F] during playback, then press [g]

repeatedly to select the desired forward speed.

Using [NEXT G] on this unit

Pressing and holding [NEXT G]

on this unit in the still

mode will also change forward playback speed.

audio CD

track 3

track 1

track 2

file 2

track 4

track 5

file 3

Return to the normal playback, press [PLAY B]

VCR

VHS

MP3

file 1

Press

first.

folder 1

file 1

folder 2

file 2

Press [PAUSE F] during playback, then press [g]

([ F.FWD g] on this unit.)

• Press [g] or [h] ([ F.FWD g] or [REW h] on

this unit) to change the speed.

• If the distorting picture appears, you can adjust it by

Fast Forward / Fast Reverse Playback

]

using [TRACKING

Press [PLAY B] to return to the normal playback.

DVD

DVD-Video AudioCD MP3

MP3

Press

first.

• For DVD, slow forward speed is different

Note:

depending on the disc.

Press

[

g] or [h] repeatedly during playback to

select the desired forward or reverse speed.

Approximate speed is 1(1/32x), 2(1/16x), 3(1/8x),

4(1/4x) and 5(1/2x).

Using [PREV H], [NEXT G] on this unit

For DVD, set “STILL MODE” to “FIELD” in

Pressing and holding [PREV H] or [NEXT G] on this

unit will also change forward or reverse playback speed.

“DISPLAY” menu if pictures in the slow forward

are blurred. ( page 23.)

Return to the normal playback, press [PLAY B]



VCR

For VCR, to prevent damage to the cassette tape,

slow mode will automatically stop after 5 minutes.

VHS

Press

first.

Press [g] or [h] ([F.FWD g] or [REW h] on this

To Skip the Titles, Chapters, Tracks, or Files

unit) during playback.

Return to the normal playback, press [PLAY B]

DVD

DVD-Video AudioCD MP3

MP3

Press

first.

For DVD, audio CD and MP3, fast forward or fast

Note:

reverse speed is different depending on the disc.

Approximate speed is 1(2x), 2(4x), 3(8x), 4(16x)

and 5(32x).

Press [PREV H] or [NEXT G] during playback to skip

titles, chapters, tracks or files to a desired point.

Using [PREV H], [NEXT G] on this unit

Pressing [PREV H] or [NEXT G] on this unit will also

skip titles / chapters / tracks / files to a desired point.

For VCR, press [g] again so the unit will search

at higher-speed. (in the SLP mode only.)

Still Mode / Step-by-step Playback

To Reset the Cassette Tape Counter

(Counter Reset)

DVD

DVD-Video AudioCD MP3

MP3

VCR

Press

first.

VHS

Press

first.

Press [PAUSE F] during playback.

Press [DISPLAY] to display the cassette tape counter on

the TV screen. Then, press [CLEAR] to reset the counter

to “0:00:00”.

DVD-Video

only

The picture goes forward by one frame each time you

press [PAUSE F] in the still mode.

This function is not available if the unit begins

the timer recording or one-touch timer recording.

Note:

Return to the normal playback, press [PLAY B]

VCR

VHS

Press

first.

To Rewind the Cassette Tape automatically

(Auto Rewind)

Press [PAUSE F] during playback.

VCR

The picture goes forward by one frame each time you

VHS

Press

first.

press [PAUSE F]

in the still mode.

• If the picture is distorted or rolling vertically, adjust the

vertical hold control on your TV if equipped.

When a cassette tape ends during playback, fast-forward

or normal recording, the unit will automatically rewind

to the beginning of the cassette tape. After rewinding

finishes, the unit will eject the cassette tape.

Return to the normal playback, press [PLAY B]

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED PLAYBACK

Disc Menu

Zoom

DVD

DVD-Video

Press

first.

Press

first.

Some discs contain menus which allow you to customize

1) Press [ZOOM] repeatedly to select the desired zoom

DVD playback. Use [K / L /

] to select an item, then

factor: 2x, 3x, 4x, 1/2x.

press [OK] (or [PLAY B]).

2) Use [K / L /

B] to slide the zoomed picture across

the TV screen.

Calling Up a Menu Screen During Playback

3) To exit zoom mode, press [ZOOM] repeatedly.

DVD

DVD-Video

Zoom function does not work while the disc

menu is displayed.

Note:

Press

first.

Press [DISC MENU] to call up the disc menu.

• Press [TITLE] to call up the title menu.

Camera Angles

Menu operations may vary depending on the

disc. Refer to the manual accompanying the disc

for details.

Note:

Some DVD may contain scenes which have been shot

simultaneously from the various angles. You can change

the camera angle if appears on the TV screen.

If the “ANGLE ICON” is set to “OFF” in “OTHERS” menu,

Resume Playback

will not appear. ( page 23.)



DVD

DVD-Video AudioCD MP3

MP3

DVD

Press

first.

DVD-Video

Press

first.

1) Press [STOP C] during playback. Resume message will

1) During playback, press [ANGLE]

appear on the TV screen.

Each time you press [ANGLE], camera angle changes.

2) Press [PLAY B], playback will resume from the point

at which playback was stopped.

Stereo Sound Mode

To cancel resume, press [STOP C] one more

time in the stop mode.

Note:

This unit allows you to select a sound mode during CD

playback.

For MP3, playback will resume from where you

stopped (if the power has been turned off, the

playback will start from the beginning of the

track).

The resume playback information stays on even

when the power is turned off, as long as the disc

stays in the unit.

DVD

AudioCD

Press

first.

1) During playback, press [AUDIO

]

Each time you press [AUDIO ], sound mode changes

as example below.

STEREO (right and left channels are active)

L-ch

R-ch

(left channel is active)

(right channel is active)

MP3 Playback

Insert a CD-RW/-R with MP3 files, the file list will

automatically appear on the TV screen.

Title, Chapter, Track, Folder or File Search

DVD

MP3

Press

first.

DVD

DVD-Video AudioCD MP3

MP3

Press

first.

1) Use [K / L] to select a desired folder from the list on

the left side in the file list.

1) Press [SEARCH] for the title, chapter, track, folder or

Then, press [PLAY B] or [OK]

file search.

2) Use [K / L] to select a desired file from the list on the

For the chapter search, press [

] to highlight

right side in the file list.

01/01

002/021

00:03:53

OFF

Then, press [PLAY B] or [OK]

3) Press [STOP C] once to stop MP3 playback

temporarily.

2) Use [the Number buttons] to enter the desired title,

Depending on some sections, it may take a while

Note:

chapter, track, folder or file number within 5 seconds.

to be recognized.

3) Press [OK]

• Folders and MP3 files are displayed respectively

as and

A maximum of 255 folders or 999 files may be

recognized on one disc.

Up to 8 hierarchies can be recognized in one

folder. Files in the 9th or deeper hierarchies

cannot be played back.

For MP3 file recorded in VBR (variable bit rate), the

unit may not display the actual elapsed time.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED PLAYBACK

To play back a double-digit track, press the track number

Repeat Playback

directly (e.g. for track 14, press [1] [4] and [OK]).

• To play back a triple-digit track, press the track number

directly for MP3. (e.g. for track 114, press [1] [1], [4] and

[OK]).

Repeat function is available only during playback.

DVD

DVD-Video AudioCD MP3

MP3

Press

first.

Depending on the DVD being played back,

1) During playback, press [REPEAT]

Note:

this function can also be performed by directly

entering the desired chapter number with

[the Number buttons]. Refer to the manual

accompanying the disc.

• Each time you press [REPEAT], repeat function

changes as below.

(repeat off)

OFF

DVD-Video

For DVD and audio CD, title, chapter or track

search is not available during programmed or

random playback.

(current chapter repeat)

CHAPTER

(current title repeat)

TITLE

OFF

Index Search

(repeat off)

VCR

AudioCD

VHS

Press

first.

(current track repeat)

TRACK

1) Press [SEARCH]

once.

2) Use [K] or [L] to select a desired index number.

3) Press [s] to fast rewinding or [B] to fast forwarding.

(entire disc repeat)

ALL

OFF

(repeat off)

4) When the cassette tape has reached an index mark,

MP3

playback will start automatically.

(current file repeat)

(current folder repeat)

(entire disc repeat)

TRACK

GROUP

ALL

• The time gap between index marks must be more

than 1 minute for SP mode, 2 minutes for LP mode

and 3 minutes for SLP mode.

Note:

The index search is not available during

recording.

• Press [STOP C] to stop the search.

If a cassette tape ends during a search, the index

search will be canceled and the unit will rewind

to the beginning of the cassette tape.

Repeat playback is not available with some discs

or during repeat A-B playback.

Note:

Repeat A-B Playback

DVD

DVD-Video AudioCD MP3

MP3

Time Search

Press

first.

1) During playback, press [A-B] at your desired starting

DVD

DVD-Video AudioCD

Press

first.

point as point A.

2) Press [A-B] at your desired ending point as point B.

3) Press [A-B] to exit the sequence so that “OFF” appears.

1) Press [SEARCH]

2) Press [

] once to highlight when operating audio CD.

Press [

] twice to highlight when operating DVD.

Point B should be in the same title or track as

point A.

Note:

01/01

002/021

--:--:--

OFF

To cancel point A, press [CLEAR] at step 1.

• Repeat A-B playback is not available with some

discs or during repeat playback.

3) Use [the Number buttons] to enter the desired time

within 5 seconds, then press [OK]

Auto Repeat Playback

Playback will start automatically.

VCR

The unit will automatically rewind the cassette tape when it

has reached the end and will automatically start playback

unless you press [STOP C] or you turn off the unit.

VHS

Press

first.

1) Press [SEARCH] twice

VCR

2) Use [K / L] to select a desired time. Then, press [

] to

fast forward, or press [

] to fast rewind. When the

cassette tape is reached to the selected time, playback

will start automatically.

VHS

Press

first.

1) In stop mode, press [SETUP]

2) Use [K] or [L] to select “AUTO REPEAT“.

3) Press [

] to “AUTO REPEAT” to set “ON” or “OFF”.

For DVD, (e.g. to play time 0:15:00) press

Note:

4) Press [SETUP] to exit.

[1] [5] [0] [0] of [the Number buttons]

For DVD and audio CD, press [CLEAR] to erase

the incorrect input at step 3.

• The auto repeat can also be set to “ON” or “OFF”

Note:

by pressing [REPEAT] on the remote control.

To cancel auto repeat, follow step 1 above.

Then, press [

] so that “OFF” appears beside

“AUTO REPEAT”. Press [SETUP] to exit.

• The auto repeat playback will start

automatically if you select “AUTO REPEAT” to

“ON” in the stop mode.

• For VCR, press [STOP C] to stop the search.

• For VCR, if a cassette tape ends during a search,

the time search will be canceled and the unit will

rewind to the beginning of the cassette tape.

• The time search is not available for programmed

and random playback of a DVD or an audio CD

or during recording of the VCR.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED PLAYBACK

Up to 20 chapters, tracks or files can be ordered.

Note:

Programmed Playback

• To erase all the programs at once, select “ALL

CLEAR’’ and press [OK] or press [CLEAR]

program input.

The number of the title or chapter you enter

using [the Number buttons] cannot exceed

the maximum number of the chapters, tracks or

files on the disc.

• During the program playback, press [STOP C]

once to set the resume point, and then press

[PLAY B] to resume the program playback

from the beginning of the track where the

[STOP C] was pressed.

During the program playback, press [STOP C]

twice to cancel the program playback. Your

programs are still stored until either the disc is

removed or power is turned off.

You can change the playback order of chapters / tracks / files.

DVD

DVD-Video AudioCD MP3

MP3

Press

first.

1) During playback, press [MODE] twice when operating

audio CD or MP3.

During playback, press [MODE] three times when

operating DVD.

2) Use [

] or [

] to select “PROGRAM”. Then press [OK]

For DVD and MP3:

3) Use [K / L /

] to select desired title (DVD) or

folder (MP3) input field.

DVD-PROGRAM

MAX

e.g. DVD

Total

TITLE CHAPTER PLAY ALL CLEAR

-- --- -- --- -- --- -- ---

• Some DVD will not allow you to set

programmed playback.

During programmed playback, “ TITLE” repeat

(DVD), and “ GROUP” repeat (MP3) are not

available.

4) Use [the Number buttons] to enter desired title

(DVD) or folder (MP3) number.

Random Playback

DVD-PROGRAM

MAX

Total

TITLE CHAPTER PLAY ALL CLEAR

This function shuffles the playing order of chapters/tracks/

files instead of playback in sequence.

03 --- -- --- -- --- -- ---

-- --- -- --- -- --- -- ---

DVD

DVD-Video AudioCD MP3

MP3

Press

first.

1) During playback, press [MODE] twice when operating

audio CD or MP3.

During playback, press [MODE] three times when

operating DVD.

2) Use [

] or [

] to select “RANDOM”. Then press [OK]

5) Press [OK], then use [the Number buttons] to enter

desired chapter number (DVD) or file number (MP3).

DVD-PROGRAM

MAX

Total

TITLE CHAPTER PLAY ALL CLEAR

• During random playback, you cannot go back

Note:

011

-- --- -- --- -- ---

to the previous track. Pressing [NEXT G]

allows you to search chapters, tracks or files

randomly.

--- -- --- -- --- -- ---

-- --- -- --- -- --- -- ---

• During DVD random playback, you can play

back chapters in the current title randomly.

Some DVD will not allow you to set random

playback.

6) Repeat steps 3 to 5 to enter another title and chapter

(DVD) or folder and file (MP3) numbers.

7) Use [K/ L/

] to select “PLAY”, then press [OK]

For audio CD:

Settings

3) Use [K/ L/

] to select desired track input field.

4) Use [the Number buttons] to enter desired track

Black Level Setting

number.

Adjust the black level to make the dark areas of the picture

brighter.

CD-PROGRAM

No.

MAX 14

Total

TRACK

PLAY ALL CLEAR

01 --

02 --

03 --

04 --

05 --

06 --

07 --

08 --

09 --

10 --

11 --

16 --

17 --

18 --

19 --

DVD

DVD-VVideo

Press

first.

12 --

13 --

14 --

15 --

1) During playback, press [MODE] once.

2) Use [

] or [

] to adjust the black level.

ON: makes the dark areas brighter.

OFF: shows the original picture as recorded.

3) Press [RETURN ] to exit.

5) Repeat steps 3 to 4 to enter another track number.

CD-PROGRAM

MAX 14

Total

No.

TRACK

PLAY ALL CLEAR

06 --

07 --

08 --

09 --

10 --

11 --

16 --

17 --

18 --

19 --

02 --

03 --

04 --

05 --

12 --

13 --

14 --

15 --

6) Use [K/ L/

] to select “PLAY”, then press [OK]

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED PLAYBACK

On-Screen Display

Subtitle Language and Audio Language

You can refer to the various information on the screen

This unit allows you to select a subtitle (if available) or an

audio language (if multiple languages are available for

audio language) during DVD playback.

when you press [DISPLAY]

DVD

Press

first.

DVD

DVD-Video

T(title):

current title number / total titles

DVD-VViddeeo

Press

first.

elapsed time of the

To Change the Subtitle Language

1) During playback, press [SUBTITLE]

current title

03/24

001/002

00:00:40

OFF

current repeat setting

Each time you press [SUBTITLE] during playback, the

subtitle language changes as example below.

1st

C(chapter):

DISPLAY

current chapter number /

total chapters

OFF

ENG

FRE

(no subtitles)

CH(chapter):

current chapter number / total chapters

(English subtitles)

(French subtitles)

remaining time

of the current chapter

001/002 00:00:19 - 00:01:11

NORMAL

2nd

elapsed time of the

current chapter

DISPLAY

2) To cancel the subtitle, use [

] or [

] to set subtitle to

“OFF“.

TT(title):

current title number / total titles

To Change the Audio Language

remaining time of the

current title

1) During playback, press [AUDIO

]

03/24

00:00:20 - 00:01:09

NORMAL

Each time you press [AUDIO ] during playback, the

current play mode setting

audio language changes as example below.

3rd

elapsed time of the

current title

DISPLAY

ENG

SPA

FRE

(English audio)

(Spanish audio)

(French audio)

Normal display (display oﬀ)

TR(track):

AudioCD

current track number / total tracks

01/26

00:00:11

OFF

current repeat setting

• If your language is not shown after pressing

[SUBTITLE] or [AUDIO ] several times, the

disc may not have that language. However,

some discs allow subtitle/audio language

setting on the disc menu.

Note:

1st

elapsed time of the

current track

DISPLAY

remaining time

of the current track

01/26

00:00:12 - 00:03:20

NORMAL

When “ ” appears on the TV screen, it means

no subtitle/audio are recorded on the scene.

Some discs will only allow you to change the

subtitle/audio language setting from the disc

menu.

Operation varies depending on the disc, so refer

to the manual along with the disc for details.

current play mode setting

2nd

3rd

elapsed time of the

DISPLAY

current track

ALL:

current track number / total tracks

remaining time of the

entire disc

01/26

00:00:14 - 01:11:28

NORMAL

elapsed time of the entire disc

DISPLAY

Normal display (display oﬀ)

current folder number / total folders

MP3

current ﬁle number / total ﬁles

in the current folder

elapsed time of the current ﬁle

004/027

001/013

00:00:36

OFF

file name1

current repeat setting

1. folder1

2. folder2

1. file name1

2. file name2

1st

DISPLAY

TR(track): current ﬁle number / total ﬁles in the current folder

elapsed time of the current ﬁle

remaining time of the current

ﬁle

001/013 00:00:43 - 00:03:36

NORMAL

file name1

current play mode setting

1. folder1

2. folder2

1. file name1

2. file name2

2nd

DISPLAY

Normal display (display oﬀ)

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

Before: Turn on the TV.

This unit has no tuner system so it cannot receive TV broadcasts without external tuner or such devices.

• You can also set the external tuner for timer recording. Refer to

Note:

“Satellite Link” on page 22.

• You

CANNOT

dub a DVD to a video cassette tape.

• Do not change the external tuner’s channel while you are recording.

You CANNOT watch one channel and record another at the same time.

this unit

external tuner

Recording & OTR (One-touch Timer Recording)

STANDBY-ON

OPEN/CLOSE

STANDBY-ON

Press

to turn on the unit.

REC

TIMER REC

VCR

Then insert a recordable tape.

STOP/EJECT PLAY RECORD

TRACKING

SOU

STANDBY-ON

Para encender la unidad, pulse

Luego inserte una cinta grabable.

If the erase-protection tab has been

removed, cover the hole with clear tape.

VCR

Press

to switch to the VCR mode.

VCR

Para cambiar al modo de VCR, pulse

INPUT

Press

until “L1” or “L2” is displayed on

VCR

• You need to press

every time you operate any

of VCR features.

first

the TV screen. Select “L1” to activate rear

input jacks. Select “L2” to activate front

input jacks.

INPUT

Pulse

hasta que se visualice “L1” o “L2” en la

SPEED

pantalla de la TV. Seleccione “L1” para activar los

conectores posteriores de entrada. Seleccione “L2”

para activar los conectores frontales de entrada.

Press

to select the desired tape speed.

SPEED

Pulse

para seleccionar la velocidad deseada

de la cinta.

• Connect your external tuner to the L1 (rear panel) jacks

of the unit. Connect camcorders and other such devices

to the L2 (front panel) jacks. Refer to pages 8, 9.

Tape speed

Recording / playback time

T60

T120

T160

Type of tape

SP mode

1hour 2hours 2-2/3hours

3hours 6hours

8hours

SLP mode

Press ^RECORDuntil desired

STOP

Press

to stop recording.

duration recording

REC

STOP

Pulse

para detener la grabación.

time is selected.

Pulse ^RECORDhasta que se seleccione

el tiempo de duración de grabación

deseado.

OPEN/CLOSE

Press

to eject the recorded

REC

(normal recording)

OTR (0:30)

OTR (1:00).....

cassette tape.

OTR (8:00)

OTR (7:30)

Pulse ^OPEN/CLOSEpara expulsar el casete grabado.

To stop recording temporarily,

Accidental Erasure Prevention

To prevent accidental

recording, remove erase-

protection tab of the cassette

tape. To record again, cover

the hole with adhesive tape.

PAUSE

press

PAUSE

Para detener la grabación temporalmente, pulse

erase-protection tab

During the recording in the pause mode, 5

TV screen. Each mark represents 1 minute.

again to resume recording.

marks appear on the

PAUSE

Press

How to set the timer recording or satellite link,

refer to pages 21-22.

• Pause mode will be automatically canceled after 5 minutes to

prevent damage to the cassette tape and the video head.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

To Check, Correct or Cancel a Timer Program

Timer Recording

1) Press [TIMER SET], and then press [VCR ] on the

VCR

remote control.

VHS

Press

first.

2) Repeat procedures in step 1 above.

Press ^SETUP, use

“TIMER PROGRAMMING”.

to select

3) Use [K / L] to select the program number you want

to check. The details of the program you select will

appear on the TV screen.

Then, press

to go to next step.

- M E N U -

Use [

s B

] to go to the digit you want to change.

TIMER PROGRAMMING

Then, use [K / L] to enter the correct numbers.

TIMER PROGRAMMING

SATELLITE LINK

PROG 12345678

DATE

START TIME

AUTO REPEAT [OFF]

CLOCK SET

You can cancel the entire program by pressing [

]

END

TIME

LANGUAGE SELECT

while the program number blinks.

L1/L2

REC SPEED

4) Press [CLEAR] to exit.

Available program

number blinks

5) Press [TIMER SET] to return to the timer standby

mode.

PROGRAM NUMBER

DATE – – / – –

START TIME – – : – – – –

Use

to select an

To Cancel a Timer Recording in Progress

empty program number. Then,

END

L1/L2

REC

TIME – – : – – – –

– –

SPEED – –

Press [STOP/EJECT

A] on the unit.

press

to go to next step.

to select

Note for Timer Recording & OTR

Use

PROGRAM NUMBER

ONCE

If there is no cassette tape in the unit or the cassette

tape does not have the erase-protection tab,

the [TIMER REC] indicator blinks and timer recording

cannot be performed.

“ONCE“, “DAILY“ (Mon-Fri), or

“WEEKLY“. Then, press

to go to next step.

DAILY

WEEKLY

ONE TIME PROGRAM

PROGRAM NUMBER

• If there is a power failure occurred or the unit is

unplugged for more than 30 seconds, clock setting and

all programmed timer recordings will be lost.

• If a cassette tape runs out before an OTR or a timer

recording is finished, the unit ejects the cassette tape.

Use

to select the

DATE

1 0 / 0 2 TUE

desired month. Then, press

to go to the next step.

START TIME – – : – – – –

END

L1/L2

REC

TIME – – : – – – –

– –

SPEED – –

Then, repeat procedures above to select the day, start

time, end time, and “L1” or “L2” as well.

After an OTR or a Timer Recording Has

Been Set, This Unit Operates as Follows:

ONE TIME PROGRAM

Use

to select

PROGRAM NUMBER

• Press [TIMER SET] on the remote control or [STOP/

DATE 1 0 / 0 2 TUE

CLEAR

START TIME 0 7 : 3 0 PM

END

L1/L2

REC

TIME 0 8 : 3 0 PM

recording speed. Then, press

EJECT

A] on the unit, then press [VCR ] to activate

SPEED SP

the VCR function again.

SLP

To cancel the timer standby mode, press [TIMER SET] on

To set another program after step 5, press

the remote control or [STOP/EJECT

A] on the unit,

Then, repeat procedures from steps 2 through 5.

then press [VCR ] to activate the VCR function again.

You can program the unit to record up to 8 programs,

and up to 1 year in advance.

Press ^{TIMER SET}to set the timer standby mode.

When an OTR or a Timer Recording is Completed.

• If timer programmings are left on the VCR, the unit will

switch to the DVD mode and then the VCR will go standby

for the next timer recording. ( All the VCR functions will be

unavailable.) If auto power off has been in effect, however,

both DVD and VCR will go to standby mode.

The [TIMER REC] indicator on this unit lights up and

the unit goes to the DVD mode.

To go back one step, press [

] during steps 3 to

Note:

All the DVD functions are available while the VCR is in

OTR, timer stadby, or timer recording mode.

Select “L1” or “L2” to activate rear input jacks or

front input jacks accordingly.

• The [TIMER REC] indicator blinks if there are no more

timer programming.

Press [STOP/EJECT

A] on this unit or [TIMER SET]

on the remote control to use the VCR when the unit is

turned off.

To Use the DVD Player During Timer

Recording or While the [TIMER REC]

Indicator is On or Blinking.

• Press [STANDBY-ON] to turn on the unit. Press [DVD

on the remote control to choose DVD mode. Then

continue with the other DVD features as described in

this manual.

]

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

Recording picture will be distorted if the copy

protection signal is being detected during

satellite link.

• W hen the timer recording and the satellite link

are overlapped, those recordings are recorded as

illustrated below.

Note:

Satellite Link

You can set the unit to start recording whenever it detects

a video signal from the external tuner.

Preparing for the Satellite Link:

Only L1 (rear) is available for satellite link and be sure

that this L1 needs to be connected by the external tuner.

The external tuner should be equipped with some kind

of timer function. Using timer function of the tuner, set it

to the output audio/video signals when it comes to the

time you want to start recording, and stop those signals

when it comes to the time you want to finish recording.

Refer to the tuner’s manual on how to set the timer.

e.g.) In case of the satellite link is overlapped on the exist-

ing timer recording.

timer recording

satellite link

recording result

e.g.) In case of the timer recording is programmed in the

middle of the satellite link.

timer recording

satellite link

VCR

DVD

DVD/VCR

AUDIO OUT

VCR

external tuner

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

AUDIO IN

VIDEO IN

AUDIO OUT

OUT

To video out jack

recording result

AUDIO IN

VIDEO IN

COAXIAL

VIDEO OUT

e.g.) In case of the timer recording is overlapped on the

To audio(L)out jack

RCA audio/video cables

existing satellite link.

timer recording

VCR

satellite link

VHS

Press

first.

recording result

SPEED

Press

to select the desired tape speed.

Dubbing a Cassette Tape

SETUP

In the stop mode, press

Warning: Unauthorized recordings of copyrighted

cassette tapes may be an infringement of

- M E N U -

Use

to select

TIMER PROGRAMMING

SATELLITE LINK

AUTO REPEAT

CLOCK SET

[OFF]

“SATELLITE LINK”. Then, press

to go to the next step.

LANGUAGE SELECT

front of the unit

output jacks of

VIDEO OUT

VIDEO

AUDIO

external device

RCA video cable

RCA audio cable

SATELLITE LINK

Use

to select the

AUDIO OUT

0 1

0 0 PM

desired hour. Then, press

go to the next step.

Then, repeat procedures above to select the minute

You can use a video disc player, cable/satellite box or

other devices with the audio/video output jacks.

as well.

The hour can be selected from 1-12 with AM or PM.

VCR

When the external tuner signal is stopped, recording

will be stopped.

VHS

Press

first.

1) Press [SPEED] on the remote control to select recording

Press

to set satellite

SATELLITE LINK

speed (SP or SLP).

link standby mode.

2) Press [INPUT] on the remote control to select L1 or L2

0 1

3 0 PM

[ON]

whichever the jack the external device is connected to.

3) Press [RECORD] on the unit, and then start playback of

the external device.

[TIMER REC] indicator: lights up and the unit goes to

the DVD mode. If you do not use DVD function, turn

OFF the unit.

An external tuner must be turned ON for satellite link

to start. If external tuner is not set to output signals,

satellite link will remain in standby mode.

4) To stop recording, press [STOP/EJECT

A] on this

unit.

5) Stop playback of the external device.

For best results during dubbing, use buttons on

this unit whenever possible. The remote control

might affect another device’s operation.

Note:

To Cancel the Satellite Link on Standby:

Press [TIMER SET] on the remote control or

[STOP/EJECT

A] on this unit.

To Cancel the Satellite Link in Progress:

Press [STOP/EJECT

A] on this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPTIONAL SETTINGS

Changing the DVD Settings (in the setup menu)

In the setup menu, you can customize the various kinds of settings as you prefer.

Refer to the following instructions to navigate through the setup menus.

1) Press [SETUP]

2) Use [

s B

] to select a setup item.

3) Use [K/ L] to go up or down in the menu list.

4) Press [OK] to access the sub contents of the highlighted item.

5) Use [K/ L] to select a setting.

6) Press [SETUP] to exit.

The following table is the contents which you can set and the default settings. Refer to the table for useful operation.

Your change to each setting stays on even when the unit is turned off.

Setup menu (highlight is the default)

Contents

Notes

AUDIO

Set the language for

audio.

Language options are not available with some discs.

Only the languages supported by the disc can be selected.

“LANGUAGE” setting for “AUDIO” and “SUBTITLE” are not

available with some discs. Then use [AUDIO ] and [SUBTITLE]

Refer to page 19.

ORIGINAL

ENGLISH

FRENCH

SPANISH

OTHER

OFF

ENGLISH

FRENCH

SPANISH

SUBTITLE

DISC MENU

Set the language for

subtitles.

OTHER

Set the language for

disc menu language.

ENGLISH

FRENCH

SPANISH

OTHER

PLAYER MENU

TV ASPECT

Set the language for

OSD (on-screen

display).

ENGLISH

FRANÇAIS

ESPAÑOL

Set the picture size

according to aspect

ratio of your TV.

Select “4:3 LETTER BOX” so that black bars may appear on the

top and bottom of the TV screen.

Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.

Select “16:9 WIDE” if a wide-screen TV is connected to this unit.

4:3 LETTER BOX

4:3 PAN & SCAN

16:9 WIDE

STILL MODE

Set the type of still

image in pausing

playback.

Select “AUTO”

usually.

“AUTO” automatically selects the best resolution setting

(“FRAME” or “FIELD”) based on the data characteristics of the

pictures. Some pictures may be blurred when you select “AUTO”

in the still mode due to their data characteristics.

An individual picture on the TV screen is called a “frame”, which

consists of two separate images called as “field”.

AUTO

FIELD

FRAME

If you select “FIELD”, the picture in the still mode will be

stabilized. If you select “FRAME”, the picture in the still mode will

be highly defined.

DRC

Set to “ON” to

This function is available only on the discs which are recorded in

the Dolby Digital format.

OFF

(

Dynamic Range Control

)

compress the range

between soft and

loud sounds.

DOWN SAMPLING

DOLBY DIGITAL

Set to “ON” when

outputting in 48kHz.

Set to “OFF” when

outputting the

When playing back a 96kHz disc with the copyright protection,

the sound will be down sampled at 48kHz even if the “DOWN

SAMPLING” is set to “OFF”.

This function is available only on digital outputting of a disc

recorded in 96kHz.

OFF

original sound.

Set the type of sound Select “PCM” when the unit is connected to a 2ch digital audio

BITSTREAM

PCM

device.

signal which outputs

from the digital

audio output jack.

Select “BITSTREAM” when the unit is connected to a Dolby

Digital decoder.

PASSWORD

LEVEL

Enter the password.

YES

Set the parental level for DVD playback. (Refer to page 24.)

LEVEL8 [ADULT]

LEVEL7 [NC-17] to

LEVEL1 [KID SAFE]

CHANGE

Set and change the password. (Refer to page 24.)

Set whether to display the angle icon or not.

ANGLE ICON

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

OPTIONAL SETTINGS

DVD

Press

first.

CONTROL LEVELS

Level 8:

DVD software of any grades (adult/

general/children) can be played back.

only DVD software intended for general

use and for children.

only DVD software intended for

children, with those intended for adult

and general use prohibited.

Press [STOP C] if you are playing back a disc.

Levels 7 to 2:

Level 1:

PARENTAL Setting

Parental setting will prevent your children from viewing

inappropriate materials (password protected). Playback

will stop if the ratings exceed the levels you set.

TIPS FOR LEVELS

• 8 [ADULT]:

DVD software of any grades (adult/

general/children) can be played back.

no one under 17 admitted

restricted; under 17 requires

accompanying parent or adult

guardian

parental guidance recommended

unsuitable for children under 13

parental guidance suggested

general audience

To Set the Parental Level

7 [NC-17]:

• 6 [R]:

SETUP

Press

to call up the setup menu.

Use

to select

• 5 [PGR]:

• 4 [PG13]:

• 3 [PG]:

2 [G]:

• 1 [KID SAFE]:

Press

, and then use

to select “YES”.

When you use the unit for the first time, use

[the Number buttons] to enter the 4-digit number

for your password (except for 4737). Then, re-enter

the new password.

suitable for children

Record the password in case you forget it.

Some DVD-video may not respond to

“PARENTAL“ setting. Make sure this function

works with your DVD-video.

Note:

PASSWORD

YES

- - - -

Enter password

The resume information will be cleared if you

change the parental level when the resume

information is on.

• If you have set password already, use

[the Number buttons] to enter the current 4-digit

password.

To Change the Password

PARENTAL_CHANGE

Follow the step 1 to 3 in “To Set the Parental Level” on

PASSWORD

LEVEL

CHANGE

the left.

Enter password

- - - -

Use

to select “CHANGE, then press

PARENTAL_CHANGE

Use

to select “LEVEL“, then press

PASSWORD

LEVEL

CHANGE

PASSWORD

LEVEL

CHANGE

to select the desired level, then press

[the Number buttons] to enter the new 4-digit

password (expect for 4737). Then, re-enter the new

password.

PASSWORD

LEVEL

CHANGE

PASSWORD

LEVEL

CHANGE

8 [ADULT]

- - - -

Enter new password

SETUP

Press

to exit.

Press

to exit.

If you forget the password, press [4] [7] [3] [7]

then enter your new password.

Note:

Password will be cleared and parental levels will

be set to “LEVEL 8 [ADULT]”.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPTIONAL SETTINGS

INITIALIZE

Reset the settings to factory default.

SETUP

Press

to call up the setup menu.

Use

to select , then press

Press

to select “YES”, then press

INITIALIZE_INITIALIZE

INITIALIZE

YES

Press

to select the desired language.

SELECT MENU LANGUAGE

ENGLISH

FRANÇAIS

ESPAÑOL

The next time you operate, the player menu language

will be the one you have selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this manual. Refer to the following:

Symptom

Remedy

No power.

Make sure the power plug is connected to an AC outlet.

Make sure the power is turned on.

This unit does not respond to the

remote control.

Check if the power plug is connected to an AC outlet.

You have to be within 23 feet (7m) of this unit.

Check if a cassette tape or disc is in this unit.

Poor picture or noise.

Interference signal may be received. Change the position and direction of the unit.

Cannot record a TV program.

This unit does not have a tuner to receive TV broadcasting.

You must connect this unit to TV with audio/video output jacks or an external tuner to

record TV programs. Refer to “Recording & OTR (One -touch Timer Recording)” on page 20

and “Satellite Link” on page 22.

Timer recording is impossible.

Cannot go into record mode.

Playback picture is partially noisy.

Make sure the timer program is set correctly.

Make sure [TIMER REC] indicator on this unit lights up. If not, press [TIMER SET]

Make sure the VCR clock is set correctly.

Make sure the cassette tape has a record tab. If needed, cover the hole with adhesive tape.

Activate this unit in VCR mode. Press [VCR ] on the remote control so that the [VCR]

indicator will illuminate.

Adjust tracking control for a better picture by pressing [TRACKING K / L]

Cannot view a picture but the audio

is OK.

Head cleaning may be necessary. Refer to “Auto Head Cleaning” (page 27).

No or poor, playback picture.

Fine tune your TV.

Connect the video cable firmly.

Video or color fades in and out when You cannot copy a copyrighted cassette tape.

making a copy of a cassette tape.

Cannot remove the cassette tape.

Check if this unit is in the VCR mode. If not, press [VCR ] on the remote control to switch

the mode.

No picture and sound.

No picture.

Please confirm to connect to DVD/VCR AUDIO OUT and DVD/VCR VIDEO OUT.

Connect the video cable firmly.

Insert a correct video disc that can be played back on this unit.

Press [DVD ] on the remote control. Check if the [DVD] indicator will illuminate. Then try

other DVD features.

Disc cannot be played back.

Insert the disc.

Clean the disc.

Place the disc correctly with the label side up.

Cancel the parental lock or change the control levels.

Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on

its surface.

No sound.

Connect the audio cables firmly.

Turn on the power of the audio component.

Correct the audio output settings.

Correct the input settings on the audio component.

No DTS audio is output.

Distorted picture.

This unit does not support DTS audio.

Connect this unit directly to the TV.

There are some cases where pictures may be slightly distorted, and those are not a sign of a

malfunction.

Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language does not

match the setting.

The camera angle cannot be

changed.

Audio or subtitle language

cannot be changed.

The selected language is not available for audio or subtitles on the DVD.

The DVD does not always contain sequences recorded from different camera angles.

The DVD does not always contain audio source or subtitles in the selected language.

The operation is prohibited by this unit or the disc.

“

” appears on the TV screen,

prohibiting an operation.

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual

for details on correct operations.

• Playback from a desired track and random playback are not available during programmed playback.

• Some functions are prohibited on some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATION

Maintenance

Servicing

Auto Head Cleaning

• Please refer to relevant topics on the “Troubleshooting

• Automatically cleans video heads as you insert or

remove a cassette tape, so you can see a clear picture.

• If the playback picture is blurred or interrupted while

the TV broadcast is showing clear, the dirt may have

accumulated on the video heads, or the usage of rental

or worn cassette tapes can cause this problem. If a

streaky or snowy picture appears during playback, the

video heads in your unit may need to be cleaned.

1. Please visit your local audio/video store and purchase

a good quality VHS video head cleaner.

Guide” on page 26 before returning the product.

• If this unit becomes inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts

inside. Turn off, unplug the power plug, and please call

our toll free customer support line found on the cover of

this manual to locate an authorized service center.

Cleaning the Cabinet

• Wipe the front panel and other exterior surfaces of the

unit with a soft cloth.

• Never use a solvent, thinner, benzene or alcohol to clean

the unit. Do not spray insecticide liquid near the unit.

Such chemicals may discolor the surface or damage the

unit.

2. If a Video head cleaner does not solve the problem,

please call our toll free customer support line found

on the cover of this manual to locate an authorized

service center.

• Remember to read the instructions along with

the video head cleaner before use.

Note:

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center to out. Do not wipe

in a circular motion.

Do not use solvents such as benzine, thinner, commercially

available cleaners, detergent, abrasive cleaning agents or

antistatic spray intended for analog records.

Clean video heads only when problems occur.

IR Signal Check

If the remote control does not work properly, you can

test if the remote control is sending out the infrared

signal with a digital camera (including built-in camera

of cellular phone). It will help to define the cause of

malfunction.

Cleaning the Disc Lens

If this unit continues to perform improperly even after

you have referred to the relevant sections and to the

“Troubleshooting Guide” in this manual, the laser optical

pickup unit may be dirty. Consult your dealer or an

authorized service center for inspection and cleaning of

the laser optical pickup unit.

With a digital camera

(including built-in camera of cellular phone):

Direct a digital camera to remote control,

press and hold a button on remote control.

If infrared light appears through digital

camera, the remote control is working.

Disc Handling

When you handle a disc, hold it by its edge and try not

to touch the surface of the disc.

Always store the disc in its protective case when not in use.

• Do not glue paper or put stickers onto the disc. This may

damage the disc, and the unit may not read it correctly.

Specifications

Output signal format : NTSC color

Recommended circumstances of recording MP3 ﬁles :

Sampling frequency :

Constant bit rate :

44.1 kHz or 48 kHz

32 kbps ~ 320 kbps

Video heads :

Tape width :

Tape speeds :

Rotary four-head

1/2 inch (12.65 mm)

SP : 1-5/16 inch/sec. (33.40 mm/sec)

LP : 16.67 mm/sec.

SLP : 7/16 inch/sec. (11.12 mm/sec.)

5 inches (12 cm) / 3 inches (8 cm)

Remote control :

Digital encoded infrared light system

Operating temperature : 41°F (5 °C) to 104°F (40°C)

Power requirements :

120 V AC +/- 10 %, 60 Hz +/- 0.5 %

Disc media size :

Terminals :

Component video output : RCA jack x 3

Y : 1 Vp-p (75 Ω)

Power consumption (maximum) :

16 W

(standby : 2.8 W)

Dimensions :

Weight :

W : 17 3/16” (435 mm)

H : 3 3/4” (94 mm)

D : 9 3/16” (233 mm)

Pb : 700 mVp-p (75 Ω)

Pr : 700 mVp-p (75 Ω)

Mini DIN 4-pin jack x 1

Y : 1 Vp-p (75 Ω)

C : 286 mVp-p (75 Ω)

RCA jack x 1 1 Vp-p (75 Ω)

Approx. 5.63 lbs (2.55 kg)

S-video output :

Video output :

Designs and specifications are subject to change without notice.

• If there is a discrepancy between languages, the default language will

be English.

Coaxial digital audio output : RCA jack x 1 500 mVp-p (75 Ω)

Audio output :

Video input :

Audio input :

RCA jack x 4 2 V rms

RCA jack x 2 1 Vp-p (75 Ω)

RCA jack x 2 2 V rms

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or

workmanship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Certain parts are excluded from this warranty.

LABOR:

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) days labor

and parts limited warranty.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR

OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO

OBTAIN SERVICE UNDER THIS WARRANTY

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to

any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use.

It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or

products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,

misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or

office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY

COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,

INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY

TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS

WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.

IF NO PROOF

OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY

FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN

SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

TENTION:

FUNAI CORP

ESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its

original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE

CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers

without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,

please contact us at:

FUNAI SERVICE CORPORATION

Tel : 1-800-605-8610

www.magnavox.com/support

2200 Spiegel Drive, Groveport, OH 43125

E8K6CUD / E8K6CUH

1VMN32573 ★★★★★

Printed in China

Download from Www.Somanuals.com. All Manuals Search And Downlo* ad1.

Lenovo Server RS210 User Manual
LG Electronics Washer DLEY1201W V DLGY1202W V User Manual
Life Fitness Bicycle 95RWEZ User Manual
Life Fitness Home Gym 93Xi User Manual
Life Fitness Home Gym Squat User Manual
Lindy Computer Hardware 42797 User Manual
Logitech Speaker System 575HSD User Manual
Maretron Network Router J2K100 User Manual
M Audio Stereo Amplifier Octane User Manual
McCulloch Portable Generator 7096 FG7008 User Manual